1 2014-02-19 Tom Tromey <tromey@redhat.com>
3 * target.h (struct target_ops) <to_goto_bookmark>: Add argument.
4 (target_goto_bookmark): Add argument.
5 * target.c (dummy_goto_bookmark): Add 'self' argument.
6 * record-full.c (record_full_goto_bookmark): Add 'self' argument.
8 2014-02-19 Tom Tromey <tromey@redhat.com>
10 * target.h (struct target_ops) <to_get_bookmark>: Add argument.
11 (target_get_bookmark): Add argument.
12 * target.c (dummy_get_bookmark): Add 'self' argument.
13 * record-full.c (record_full_get_bookmark): Add 'self' argument.
15 2014-02-19 Tom Tromey <tromey@redhat.com>
17 * target.h (struct target_ops) <to_make_corefile_notes>: Add
19 (target_make_corefile_notes): Add argument.
20 * target.c (dummy_make_corefile_notes): Add 'self' argument.
21 * procfs.c (procfs_make_note_section): Add 'self' argument.
22 (procfs_make_note_section): Add 'self' argument.
23 (procfs_make_note_section): Add 'self' argument.
24 * linux-nat.c (linux_nat_make_corefile_notes): Add 'self'
26 * fbsd-nat.h (fbsd_make_corefile_notes): Add 'self' argument.
27 * fbsd-nat.c (fbsd_make_corefile_notes): Add 'self' argument.
28 * exec.c (exec_make_note_section): Add 'self' argument.
29 (exec_make_note_section): Add 'self' argument.
31 2014-02-19 Tom Tromey <tromey@redhat.com>
33 * target.h (struct target_ops) <to_find_memory_regions>: Add
35 (target_find_memory_regions): Add argument.
36 * target.c (dummy_find_memory_regions): Add 'self' argument.
37 * procfs.c (proc_find_memory_regions): Add 'self' argument.
38 * gnu-nat.c (gnu_find_memory_regions): Add 'self' argument.
39 * fbsd-nat.h (fbsd_find_memory_regions): Add 'self' argument.
40 * fbsd-nat.c (fbsd_find_memory_regions): Add 'self' argument.
41 * exec. (exec_do_find_memory_regions): New global.
42 (exec_set_find_memory_regions): Rewrite.
43 (exec_find_memory_regions): New function.
44 (init_exec_ops): Use exec_find_memory_regions.
46 2014-02-19 Tom Tromey <tromey@redhat.com>
48 * target.h (struct target_ops) <to_supports_non_stop>: Add
50 * target.c (find_default_supports_non_stop): Add argument.
51 (target_supports_non_stop): Add argument.
52 (find_default_supports_non_stop): Add 'self' argument.
53 * remote.c (remote_supports_non_stop): Add 'self' argument.
54 * linux-nat.c (linux_nat_supports_non_stop): Add 'self' argument.
56 2014-02-19 Tom Tromey <tromey@redhat.com>
58 * target.h (struct target_ops) <to_log_command>: Add argument.
59 (target_log_command): Add argument.
60 * serial.h (serial_log_command): Add 'self' argument.
61 * serial.c (serial_log_command): Add 'self' argument.
63 2014-02-19 Tom Tromey <tromey@redhat.com>
65 * windows-nat.c (windows_pid_to_exec_file): Add 'self' argument.
66 * target.h (struct target_ops) <to_pid_to_exec_file>: Add
68 (target_pid_to_exec_file): Add argument.
69 * target.c (debug_to_pid_to_exec_file): Add argument.
70 (update_current_target): Update.
71 * nbsd-nat.h (nbsd_pid_to_exec_file): Add 'self' argument.
72 * nbsd-nat.c (nbsd_pid_to_exec_file): Add 'self' argument.
73 * linux-nat.c (linux_child_pid_to_exec_file): Add 'self' argument.
74 (linux_handle_extended_wait): Update.
75 * inf-child.c (inf_child_pid_to_exec_file): Add 'self' argument.
76 * fbsd-nat.h (fbsd_pid_to_exec_file): Add 'self' argument.
77 * fbsd-nat.c (fbsd_pid_to_exec_file): Add 'self' argument.
78 * darwin-nat.c (darwin_pid_to_exec_file): Add 'self' argument.
80 2014-02-19 Tom Tromey <tromey@redhat.com>
82 * target.h (struct target_ops) <to_rcmd>: Add argument.
83 (target_rcmd): Add argument.
84 * target.c (debug_to_rcmd): Add argument.
85 (update_current_target, do_monitor_command): Update.
86 * remote.c (remote_rcmd): Add 'self' argument.
87 * monitor.c (monitor_rcmd): Add 'self' argument.
89 2014-02-19 Tom Tromey <tromey@redhat.com>
91 * windows-nat.c (windows_stop): Add 'self' argument.
92 * target.h (struct target_ops) <to_stop>: Add argument.
93 * target.c (target_stop): Add argument.
94 (debug_to_stop): Add argument.
95 (update_current_target): Update.
96 * remote.c (remote_stop): Add 'self' argument.
97 * remote-sim.c (gdbsim_stop): Add 'self' argument.
98 (gdbsim_cntrl_c): Update.
99 * remote-m32r-sdi.c (m32r_stop): Add 'self' argument.
100 * procfs.c (procfs_stop): Add 'self' argument.
101 * nto-procfs.c (procfs_stop): Add 'self' argument.
102 * monitor.c (monitor_stop): Add 'self' argument.
103 (monitor_open): Update.
104 * linux-nat.c (linux_nat_stop): Add argument.
105 * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument.
106 * gnu-nat.c (gnu_stop): Add 'self' argument.
107 * darwin-nat.c (darwin_stop): Add 'self' argument.
109 2014-02-19 Tom Tromey <tromey@redhat.com>
111 * target.h (struct target_ops) <to_thread_name>: Add argument.
112 * target.c (target_thread_name): Add argument.
113 (update_current_target): Update.
114 * linux-nat.c (linux_nat_thread_name): Add 'self' argument.
116 2014-02-19 Tom Tromey <tromey@redhat.com>
118 * target.h (struct target_ops) <to_extra_thread_info>: Add
120 (target_extra_thread_info): Add argument.
121 * target.c (update_current_target): Update.
122 * remote.c (remote_threads_extra_info): Add 'self' argument.
123 * ravenscar-thread.c (ravenscar_extra_thread_info): Add 'self'
125 * nto-tdep.h (nto_extra_thread_info): Add 'self' argument.
126 * nto-tdep.c (nto_extra_thread_info): Add 'self' argument.
127 * linux-thread-db.c (thread_db_extra_thread_info): Add 'self'
129 * inf-ttrace.c (inf_ttrace_extra_thread_info): Add 'self'
131 * bsd-uthread.c (bsd_uthread_extra_thread_info): Add 'self'
133 * aix-thread.c (aix_thread_extra_thread_info): Add 'self'
136 2014-02-19 Tom Tromey <tromey@redhat.com>
138 * target.h (struct target_ops) <to_program_signals>: Add argument.
139 * target.c (target_program_signals): Add argument.
140 * remote.c (remote_program_signals): Add 'self' argument.
142 2014-02-19 Tom Tromey <tromey@redhat.com>
144 * target.h (struct target_ops) <to_pass_signals>: Add argument.
145 * target.c (target_pass_signals): Add argument.
146 * remote.c (remote_pass_signals): Add 'self' argument.
147 (remote_start_remote): Update.
148 * procfs.c (procfs_pass_signals): Add 'self' argument.
149 * nto-procfs.c (procfs_pass_signals): Add 'self' argument.
150 * linux-nat.c (linux_nat_pass_signals): Add 'self' argument.
151 (linux_nat_create_inferior, linux_nat_attach): Update.
153 2014-02-19 Tom Tromey <tromey@redhat.com>
155 * windows-nat.c (windows_can_run): Add 'self' argument.
156 * target.h (struct target_ops) <to_can_run>: Add argument.
157 (target_can_run): Add argument.
158 * target.c (debug_to_can_run): Add argument.
159 (update_current_target): Update.
160 * nto-procfs.c (procfs_can_run): Add 'self' argument.
161 * inf-child.c (inf_child_can_run): Add 'self' argument.
162 * go32-nat.c (go32_can_run): Add 'self' argument.
164 2014-02-19 Tom Tromey <tromey@redhat.com>
166 * target.h (struct target_ops) <to_has_exited>: Add argument.
167 (target_has_exited): Add argument.
168 * target.c (debug_to_has_exited): Add argument.
169 (update_current_target): Update.
171 2014-02-19 Tom Tromey <tromey@redhat.com>
173 * target.h (struct target_ops) <to_set_syscall_catchpoint>: Add
175 (target_set_syscall_catchpoint): Add argument.
176 * linux-nat.c (linux_child_set_syscall_catchpoint): Add 'self'
178 * target.c (update_current_target): Update.
180 2014-02-19 Tom Tromey <tromey@redhat.com>
182 * target.h (struct target_ops) <to_remove_exec_catchpoint>: Add
184 (target_remove_exec_catchpoint): Add argument.
185 * target.c (debug_to_remove_exec_catchpoint): Add argument.
186 (update_current_target): Update.
187 * linux-nat.c (linux_child_remove_exec_catchpoint): Add 'self'
190 2014-02-19 Tom Tromey <tromey@redhat.com>
192 * target.h (struct target_ops) <to_insert_exec_catchpoint>: Add
194 (target_insert_exec_catchpoint): Add argument.
195 * target.c (debug_to_insert_exec_catchpoint): Add argument.
196 (update_current_target): Update.
197 * linux-nat.c (linux_child_insert_exec_catchpoint): Add 'self'
200 2014-02-19 Tom Tromey <tromey@redhat.com>
202 * target.h (struct target_ops) <to_remove_vfork_catchpoint>: Add
204 (target_remove_vfork_catchpoint): Add argument.
205 * target.c (debug_to_remove_vfork_catchpoint): Add argument.
206 (update_current_target): Update.
207 * linux-nat.c (linux_child_remove_vfork_catchpoint): Add 'self'
210 2014-02-19 Tom Tromey <tromey@redhat.com>
212 * target.h (struct target_ops) <to_insert_vfork_catchpoint>: Add
214 (target_insert_vfork_catchpoint): Add argument.
215 * target.c (debug_to_insert_vfork_catchpoint): Add argument.
216 (update_current_target): Update.
217 * linux-nat.c (linux_child_insert_vfork_catchpoint): Add 'self'
220 2014-02-19 Tom Tromey <tromey@redhat.com>
222 * target.h (struct target_ops) <to_remove_fork_catchpoint>: Add
224 (target_remove_fork_catchpoint): Add argument.
225 * target.c (debug_to_remove_fork_catchpoint): Add argument.
226 (update_current_target): Update.
227 * linux-nat.c (linux_child_remove_fork_catchpoint): Add 'self'
230 2014-02-19 Tom Tromey <tromey@redhat.com>
232 * target.h (struct target_ops) <to_insert_fork_catchpoint>: Add
234 (target_insert_fork_catchpoint): Add argument.
235 * target.c (debug_to_insert_fork_catchpoint): Add argument.
236 (update_current_target): Update.
237 * linux-nat.c (linux_child_insert_fork_catchpoint): Add 'self'
240 2014-02-19 Tom Tromey <tromey@redhat.com>
242 * target.h (struct target_ops) <to_post_startup_inferior>: Add
244 (target_post_startup_inferior): Add argument.
245 * target.c (debug_to_post_startup_inferior): Add argument.
246 (update_current_target): Update.
247 * spu-linux-nat.c (spu_child_post_startup_inferior): Add 'self'
249 * linux-nat.c (linux_child_post_startup_inferior): Add 'self'
251 * inf-ptrace.c (inf_ptrace_post_startup_inferior): Add 'self'
253 * inf-child.c (inf_child_post_startup_inferior): Add 'self'
255 * i386-linux-nat.c (i386_linux_child_post_startup_inferior): Add
257 (super_post_startup_inferior): Likewise.
258 * amd64-linux-nat.c (amd64_linux_child_post_startup_inferior): Add
260 (super_post_startup_inferior): Likewise.
261 * aarch64-linux-nat.c (aarch64_linux_child_post_startup_inferior):
263 (super_post_startup_inferior): Likewise.
265 2014-02-19 Tom Tromey <tromey@redhat.com>
267 * target.h (struct target_ops) <to_load>: Add argument.
268 * target.c (target_load): Add argument.
269 (debug_to_load): Add argument.
270 (update_current_target): Update.
271 * remote.c (remote_load): Add 'self' argument.
272 * remote-sim.c (gdbsim_load): Add 'self' argument.
273 * remote-mips.c (mips_load): Add 'self' argument.
274 * remote-m32r-sdi.c (m32r_load): Add 'self' argument.
275 * monitor.c (monitor_load): Add 'self' argument.
276 * m32r-rom.c (m32r_load_gen): Add 'self' argument.
278 2014-02-19 Tom Tromey <tromey@redhat.com>
280 * target.h (struct target_ops) <to_terminal_info>: Add argument.
281 (target_terminal_info): Add argument.
282 * target.c (debug_to_terminal_info): Add argument.
283 (default_terminal_info): Likewise.
284 * inflow.c (child_terminal_info): Add 'self' argument.
285 * inferior.h (child_terminal_info): Add 'self' argument.
286 * go32-nat.c (go32_terminal_info): Add 'self' argument.
288 2014-02-19 Tom Tromey <tromey@redhat.com>
290 * target.h (struct target_ops) <to_terminal_save_ours>: Add
292 (target_terminal_save_ours): Add argument.
293 * target.c (debug_to_terminal_save_ours): Add argument.
294 (update_current_target): Update.
295 * inflow.c (terminal_save_ours): Add 'self' argument.
296 * inferior.h (terminal_save_ours): Add 'self' argument.
298 2014-02-19 Tom Tromey <tromey@redhat.com>
300 * target.h (struct target_ops) <to_terminal_ours>: Add argument.
301 (target_terminal_ours): Add argument.
302 * target.c (debug_to_terminal_ours): Add argument.
303 (update_current_target): Update.
304 * remote.c (remote_terminal_ours): Add 'self' argument.
305 (remote_close): Update.
306 * linux-nat.c (linux_nat_terminal_ours): Add 'self' argument.
307 * inflow.c (terminal_ours): Add 'self' argument.
308 * inferior.h (terminal_ours): Add 'self' argument.
309 * go32-nat.c (go32_terminal_ours): Add 'self' argument.
311 2014-02-19 Pedro Alves <palves@redhat.com>
312 Tom Tromey <tromey@redhat.com>
314 * target.h (struct target_ops) <to_terminal_ours_for_output>: Add
316 (target_terminal_ours_for_output): Add argument.
317 * target.c (debug_to_terminal_ours_for_output): Add argument.
318 (update_current_target): Update.
319 * inflow.c (terminal_ours_for_output): Add 'self' argument.
320 * inferior.h (terminal_ours_for_output): Add 'self' argument.
321 * go32-nat.c (go32_terminal_ours): Add 'self' argument.
323 2014-02-19 Tom Tromey <tromey@redhat.com>
325 * target.h (struct target_ops) <to_terminal_inferior>: Add
327 * target.c (target_terminal_inferior): Add argument.
328 (update_current_target): Update.
329 * remote.c (remote_terminal_inferior): Add 'self' argument.
330 * linux-nat.c (linux_nat_terminal_inferior): Add 'self' argument.
331 * inflow.c (terminal_inferior): Add 'self' argument.
332 * inferior.h (terminal_inferior): Add 'self' argument.
333 * go32-nat.c (go32_terminal_inferior): Add 'self' argument.
334 (go32_terminal_inferior): Add 'self' argument.
336 2014-02-19 Tom Tromey <tromey@redhat.com>
338 * target.h (struct target_ops) <to_terminal_init>: Add argument.
339 (target_terminal_init): Add argument.
340 * target.c (debug_to_terminal_init): Add argument.
341 (update_current_target): Update.
342 * inflow.c (terminal_init_inferior): Add 'self' argument.
343 * inferior.h (terminal_init_inferior): Add 'self' argument.
344 * go32-nat.c (go32_terminal_init): Add 'self' argument.
345 * gnu-nat.c (gnu_terminal_init_inferior): Add 'self' argument.
347 2014-02-19 Tom Tromey <tromey@redhat.com>
349 * target.h (struct target_ops)
350 <to_can_accel_watchpoint_condition>: Add argument.
351 (target_can_accel_watchpoint_condition): Add argument.
352 * target.c (debug_to_can_accel_watchpoint_condition): Add
354 (update_current_target): Update.
355 * ppc-linux-nat.c (ppc_linux_can_accel_watchpoint_condition): Add
358 2014-02-19 Tom Tromey <tromey@redhat.com>
360 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
362 (target_region_ok_for_hw_watchpoint): Add argument.
363 * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument.
364 (default_region_ok_for_hw_watchpoint): Add argument.
365 * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument.
366 * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self'
368 * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self'
370 * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self'
372 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add
374 * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add
376 * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add
378 * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument.
379 * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add
381 * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint):
384 2014-02-19 Tom Tromey <tromey@redhat.com>
386 * target.h (struct target_ops) <to_insert_watchpoint>: Add
388 (target_insert_watchpoint): Add argument.
389 * target.c (debug_to_insert_watchpoint): Add argument.
390 (update_current_target): Update.
391 * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument.
392 * remote.c (remote_insert_watchpoint): Add 'self' argument.
393 * remote-mips.c (mips_insert_watchpoint): Add 'self' argument.
394 * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument.
395 * procfs.c (procfs_insert_watchpoint): Add 'self' argument.
396 * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self'
398 * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument.
399 (procfs_insert_hw_watchpoint): Add 'self' argument.
400 * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self'
402 * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self'
404 * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self'
406 * i386-nat.c (i386_insert_watchpoint): Add 'self' argument.
407 * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self'
409 * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add
412 2014-02-19 Tom Tromey <tromey@redhat.com>
414 * target.h (struct target_ops) <to_remove_watchpoint>: Add
416 (target_remove_watchpoint): Add argument.
417 * target.c (debug_to_remove_watchpoint): Add argument.
418 (update_current_target): Update.
419 * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument.
420 * remote.c (remote_remove_watchpoint): Add 'self' argument.
421 * remote-mips.c (mips_remove_watchpoint): Add 'self' argument.
422 * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument.
423 * procfs.c (procfs_remove_watchpoint): Add 'self' argument.
424 * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self'
426 * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument.
427 * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self'
429 * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self'
431 * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self'
433 * i386-nat.c (i386_remove_watchpoint): Add 'self' argument.
434 * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self'
436 * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add
439 2014-02-19 Tom Tromey <tromey@redhat.com>
441 * target.h (struct target_ops) <to_remove_hw_breakpoint>: Add
443 (target_remove_hw_breakpoint): Add argument.
444 * target.c (debug_to_remove_hw_breakpoint): Add argument.
445 (update_current_target): Update.
446 * remote.c (remote_remove_hw_breakpoint): Add 'self' argument.
447 * ppc-linux-nat.c (ppc_linux_remove_hw_breakpoint): Add 'self'
449 * i386-nat.c (i386_remove_hw_breakpoint): Add 'self' argument.
450 * arm-linux-nat.c (arm_linux_remove_hw_breakpoint): Add 'self'
452 * aarch64-linux-nat.c (aarch64_linux_remove_hw_breakpoint): Add
455 2014-02-19 Tom Tromey <tromey@redhat.com>
457 * target.h (struct target_ops) <to_insert_hw_breakpoint>: Add
459 (target_insert_hw_breakpoint): Add argument.
460 * target.c (debug_to_insert_hw_breakpoint): Add argument.
461 (update_current_target): Update.
462 * remote.c (remote_insert_hw_breakpoint): Add 'self' argument.
463 * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self'
465 * nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument.
466 * i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument.
467 * arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self'
469 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add
472 2014-02-19 Tom Tromey <tromey@redhat.com>
474 * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add
476 (target_can_use_hardware_watchpoint): Add argument.
477 * target.c (debug_to_can_use_hw_breakpoint): Add argument.
478 (update_current_target): Update.
479 * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self'
481 * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self'
483 * remote.c (remote_check_watch_resources): Add 'self' argument.
484 * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument.
485 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self'
487 * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument.
488 * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self'
490 * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self'
492 * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self'
494 * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self'
496 * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self'
498 * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self'
500 * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument.
501 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self'
503 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add
506 2014-02-19 Tom Tromey <tromey@redhat.com>
508 * target.h (struct target_ops) <to_post_attach>: Add argument.
509 (target_post_attach): Add argument.
510 * target.c (debug_to_post_attach): Add argument.
511 (update_current_target): Update.
512 * spu-linux-nat.c (spu_child_post_attach): Add 'self' argument.
513 * nto-procfs.c (procfs_post_attach): Add 'self' argument.
514 * linux-nat.c (linux_child_post_attach): Add 'self' argument.
515 * inf-ptrace.c (inf_ptrace_post_attach): Add 'self' argument.
516 * inf-child.c (inf_child_post_attach): Add 'self' argument.
518 2014-02-19 Tom Tromey <tromey@redhat.com>
520 * windows-nat.c (windows_close): Add 'self' argument.
521 * tracepoint.c (tfile_close): Add 'self' argument.
522 * target.h (struct target_ops) <to_close>: Add argument.
523 * target.c (target_close): Add argument.
524 (update_current_target): Update.
525 * remote.c (remote_close): Add 'self' argument.
526 * remote-sim.c (gdbsim_close): Add 'self' argument.
527 * remote-mips.c (mips_close): Add 'self' argument.
528 * remote-m32r-sdi.c (m32r_close): Add 'self' argument.
529 * record-full.c (record_full_close): Add 'self' argument.
530 * record-btrace.c (record_btrace_close): Add 'self' argument.
531 * monitor.h (monitor_close): Add 'self' argument.
532 * monitor.c (monitor_close): Add 'self' argument.
533 * mips-linux-nat.c (mips_linux_close): Add 'self' argument.
534 * linux-nat.c (linux_nat_close): Add argument.
535 * go32-nat.c (go32_close): Add 'self' argument.
536 * exec.c (exec_close_1): Add 'self' argument.
537 * ctf.c (ctf_close): Add 'self' argument.
538 * corelow.c (core_close): Add 'self' argument.
539 (core_close_cleanup): Update.
540 * bsd-uthread.c (bsd_uthread_close): Add 'self' argument.
541 * bsd-kvm.c (bsd_kvm_close): Add 'self' argument.
543 2014-02-19 Tom Tromey <tromey@redhat.com>
545 * remote.c (remote_load): New function.
546 (init_remote_ops): Use it.
548 2014-02-19 Tom Tromey <tromey@redhat.com>
550 * common/linux-btrace.c (linux_supports_btrace): Add "ops"
552 * common/linux-btrace.h (linux_supports_btrace): Update.
553 * remote.c (remote_supports_btrace): Add "self" argument.
554 * target-delegates.c: Rebuild.
555 * target.c (target_supports_btrace): Remove.
556 * target.h (struct target_ops) <to_supports_btrace>: Add
558 (target_supports_btrace): New define.
560 2014-02-19 Tom Tromey <tromey@redhat.com>
562 * record-full.c (record_full_beneath_to_resume_ops)
563 (record_full_beneath_to_resume, record_full_beneath_to_wait_ops)
564 (record_full_beneath_to_wait)
565 (record_full_beneath_to_store_registers_ops)
566 (record_full_beneath_to_store_registers)
567 (record_full_beneath_to_xfer_partial_ops)
568 (record_full_beneath_to_xfer_partial)
569 (record_full_beneath_to_insert_breakpoint_ops)
570 (record_full_beneath_to_insert_breakpoint)
571 (record_full_beneath_to_remove_breakpoint_ops)
572 (record_full_beneath_to_remove_breakpoint)
573 (record_full_beneath_to_stopped_by_watchpoint)
574 (record_full_beneath_to_stopped_data_address)
575 (record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume)
576 (tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops)
577 (tmp_to_store_registers, tmp_to_xfer_partial_ops)
578 (tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops)
579 (tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops)
580 (tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint)
581 (tmp_to_stopped_data_address, tmp_to_async): Remove.
582 (record_full_open_1, record_full_open): Update. Use RECORD_IS_USED.
583 (record_full_resume, record_full_wait_1)
584 (record_full_stopped_by_watchpoint, record_full_stopped_data_address)
585 (record_full_store_registers, record_full_xfer_partial)
586 (record_full_insert_breakpoint, record_full_remove_breakpoint)
587 (record_full_async, record_full_core_xfer_partial): Use target
589 * target-delegates.c: Rebuild.
590 * target.c (current_xfer_partial): Remove.
591 (update_current_target): Do not INHERIT or de_fault
592 to_insert_breakpoint, to_remove_breakpoint,
593 to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p,
594 to_is_async_p, to_async. Do not set to_xfer_partial field.
595 (default_xfer_partial): Simplify.
596 (current_xfer_partial): Remove.
597 (target_wait, target_resume): Simplify.
598 (find_default_can_async_p, find_default_is_async_p): Update.
599 (init_dummy_target): Don't set to_can_async_p, to_is_async_p,
600 to_xfer_partial, to_stopped_by_watchpoint,
601 to_stopped_data_address.
602 (target_store_registers): Simplify.
603 (forward_target_remove_breakpoint)
604 (forward_target_insert_breakpoint): Remove.
605 (target_remove_breakpoint, target_insert_breakpoint)
606 (debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update.
607 * target.h (struct target_ops) <to_resume, to_wait,
608 to_store_registers, to_insert_breakpoint, to_remove_breakpoint,
609 to_stopped_by_watchpoint, to_stopped_data_address, to_can_async_p,
610 to_is_async_p, to_async, to_xfer_partial>: Add TARGET_DEFAULT
612 (forward_target_remove_breakpoint)
613 (forward_target_insert_breakpoint): Remove.
614 * record-btrace.c (record_btrace_remove_breakpoint): Delegate
616 (record_btrace_insert_breakpoint): Delegate directly.
618 2014-02-19 Tom Tromey <tromey@redhat.com>
621 * target-delegates.c: New file.
622 * target.c: Include target-delegates.c.
623 (init_dummy_target): Call install_dummy_methods.
624 (complete_target_initialization): Call install_delegators.
625 * target.h (TARGET_DEFAULT_IGNORE, TARGET_DEFAULT_NORETURN)
626 (TARGET_DEFAULT_RETURN, TARGET_DEFAULT_FUNC): New defines.
627 * make-target-delegates: New file.
629 2014-02-19 Tom Tromey <tromey@redhat.com>
631 * record.c (find_record_target): Use find_target_at.
632 * target.c (find_target_at): New function.
633 * target.h (find_target_at): Declare.
635 2014-02-19 Tom Tromey <tromey@redhat.com>
637 * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint):
639 * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add
641 * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument.
642 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add
644 * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops'
646 * linux-nat.c (save_sigtrap): Update.
647 (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p)
648 (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument.
649 (linux_nat_close): Update.
650 * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops'
652 * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops'
654 * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument.
655 * record-full.c (record_full_beneath_to_stopped_by_watchpoint)
656 (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint)
657 (tmp_to_async): Add 'ops' argument.
658 (record_full_stopped_by_watchpoint, record_full_async)
659 (record_full_can_async_p, record_full_is_async_p): Add 'ops'
661 * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint)
662 (m32r_stopped_by_watchpoint): Add 'ops' argument.
663 * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument.
664 * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p)
665 (remote_is_async_p, remote_async): Add 'ops' argument.
666 (remote_stopped_data_address): Update.
667 * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument.
668 * target.c (update_current_target)
669 (find_default_can_async_p, find_default_is_async_p): Update.
670 (init_dummy_target): Update.
671 (debug_to_stopped_by_watchpoint): Add 'ops' argument.
672 * target.h (struct target_ops) <to_stopped_by_watchpoint,
673 to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument.
674 (target_can_async_p, target_is_async_p, target_async)
675 (target_stopped_by_watchpoint): Update.
677 2014-02-19 Yao Qi <yao@codesourcery.com>
680 * gdbarch.sh: Remove startup_gdbarch.
681 * gdbarch.c: Regenerated.
682 * gdbarch.h: Likewise.
684 2014-02-17 Kevin Buettner <kevinb@redhat.com>
686 * rl78-tdep.c (rl78_g10_register_name): New function.
687 (rl78_return_value): Add g10 support.
688 (rl78_gdbarch_init): Register rl78_g10_register_name for the
691 2014-02-17 Doug Evans <xdje42@gmail.com>
693 * Makefile.in (SUBDIR_GUILE_OBS): Resort alphabetically.
694 (SUBDIR_GUILE_SRCS): Ditto.
695 (scm-gsmob.o): Ditto.
697 2014-02-17 Yao Qi <yao@codesourcery.com>
699 * gnu-nat.c (ILL_RPC): Declare defined function.
701 2014-02-17 Yao Qi <yao@codesourcery.com>
703 * gnu-nat.c (gnu_read_inferior): Change 'copy_count' type to
704 mach_msg_type_number_t.
705 (gnu_write_inferior): Likewise.
707 2014-02-17 Yao Qi <yao@codesourcery.com>
709 * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd'
711 (proc_steal_exc_port, make_proc, inf_set_pid): Likewise.
712 (inf_validate_procs, inf_signal): Likewise.
713 (S_exception_raise_request): Likewise.
714 (do_mach_notify_dead_name): Likewise.
715 (steal_exc_port): Likewise.
716 (gnu_read_inferior): Change 'copy_count''s type to
717 mach_msg_type_number_t.
718 (gnu_write_inferior): Likewise. Use 'lx' instead of 'x' in
721 2014-02-16 Thomas Schwinge <thomas@codesourcery.com>
723 * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit
724 flag. Adjust all users; in particular...
725 (gnu_wait): ..., don't decrement its value in here...
726 (gnu_create_inferior): ..., and instead set the flag in here,
727 around the startup_inferior call, and call that one with
728 START_INFERIOR_TRAPS_EXPECTED.
730 * gnu-nat.c (ill_rpc): Remove function; replaced with this...
731 (ILL_RPC): ... new macro.
732 (do_mach_notify_no_senders, do_mach_notify_port_deleted)
733 (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed)
734 (do_mach_notify_send_once, S_proc_setmsgport_reply)
735 (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub
736 functions with ILL_RPC macro.
737 (S_proc_pid2task_reply, S_proc_task2pid_reply)
738 (S_proc_task2proc_reply, S_proc_proc2task_reply)
739 (S_proc_pid2proc_reply, S_proc_getprocinfo_reply)
740 (S_proc_getprocargs_reply, S_proc_getprocenv_reply)
741 (S_proc_getloginid_reply, S_proc_getloginpids_reply)
742 (S_proc_getlogin_reply, S_proc_getsid_reply)
743 (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply)
744 (S_proc_getsidport_reply, S_proc_getpgrp_reply)
745 (S_proc_getpgrppids_reply, S_proc_get_tty_reply)
746 (S_proc_getnports_reply, S_proc_is_important_reply)
747 (S_proc_get_code_reply): New stub functions, generated with
750 * reply_mig_hack.awk: In phase 5, keep going if we have not yet
751 collected the type check structures.
753 * reply_mig_hack.awk: Don't expect to see the auto keyword.
755 2014-02-14 Doug Evans <dje@google.com>
757 * target.c (target_write_partial): Fix result type.
759 2014-02-14 Jose E. Marchesi <jose.marchesi@oracle.com>
761 * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
762 the proper offsets to access fpregset_t.
764 2014-02-13 Sanimir Agovic <sanimir.agovic@intel.com>
766 * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
767 (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
768 * h8300-tdep.c (setmachinelist): Remove global.
769 * hppa-tdep.c (hppa_sigtramp): Remove global.
770 * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
771 RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
772 * ravenscar-thread.c (update_target_observer): Remove global.
773 * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.
775 2014-02-12 Tom Tromey <tromey@redhat.com>
777 * common/rsp-low.c: Update comments.
778 * common/rsp-low.h: Update comments.
780 2014-02-12 Tom Tromey <tromey@redhat.com>
782 * common/rsp-low.c (convert_ascii_to_int): Remove.
783 * common/rsp-low.h (convert_ascii_to_int): Don't declare.
785 2014-02-12 Tom Tromey <tromey@redhat.com>
787 * common/rsp-low.h (unhexify): Don't declare.
788 * common/rsp-low.c (unhexify): Remove.
790 2014-02-12 Tom Tromey <tromey@redhat.com>
792 * common/rsp-low.h (convert_int_to_ascii): Don't declare.
793 * common/rsp-low.c (convert_int_to_ascii): Remove.
795 2014-02-12 Tom Tromey <tromey@redhat.com>
797 * common/rsp-low.h (hexify): Don't declare.
798 * common/rsp-low.c (hexify): Remove.
800 2014-02-12 Tom Tromey <tromey@redhat.com>
802 * common/rsp-low.c (hexify): Never take strlen of argument.
804 2014-02-12 Tom Tromey <tromey@redhat.com>
806 * common/rsp-low.c (bin2hex): Never take strlen of argument.
807 * remote.c (extended_remote_run, remote_rcmd)
808 (remote_download_trace_state_variable, remote_save_trace_data)
809 (remote_set_trace_notes): Update.
810 * tracepoint.c (encode_source_string, tfile_write_status)
811 (tfile_write_uploaded_tsv): Update.
813 2014-02-12 Tom Tromey <tromey@redhat.com>
815 * tracepoint.c: Include rsp-low.h.
816 * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
817 * remote.c: Include rsp-low.h.
818 (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
819 (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
820 (remote_unescape_input): Move to common/rsp-low.c.
821 * common/rsp-low.h: New file.
822 * common/rsp-low.c: New file.
823 * Makefile.in (SFILES): Add common/rsp-low.c.
824 (HFILES_NO_SRCDIR): Add common/rsp-low.h.
825 (COMMON_OBS): Add rsp-low.o.
826 (rsp-low.o): New target.
828 2014-02-12 Tom Tromey <tromey@redhat.com>
830 * utils.h: Include print-utils.h.
831 (host_address_to_string, plongest, pulongest, phex, phex_nz)
832 (int_string, core_addr_to_string, core_addr_to_string_nz)
833 (hex_string, hex_string_custom): Don't declare.
834 * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
835 (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
836 (hex_string_custom, int_string, core_addr_to_string)
837 (core_addr_to_string_nz, host_address_to_string): Move to
838 common/print-utils.c.
839 * common/print-utils.h: New file.
840 * common/print-utils.c: New file
841 * Makefile.in (SFILES): Add common/print-utils.c.
842 (HFILES_NO_SRCDIR): Add common/print-utils.h.
843 (COMMON_OBS): Add print-utils.o.
844 (print-utils.o): New target.
846 2014-02-12 Tom Tromey <tromey@redhat.com>
848 * nios2-tdep.c (nios2_stub_frame_base_address): Remove.
850 2014-02-12 Mark Kettenis <kettenis@gnu.org>
852 * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.
854 2014-02-12 Mark Kettenis <kettenis@gnu.org>
856 * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
857 if a PT_IO ptrace request returns sucessfully but indicates that 0
858 bytes were transferred.
860 2014-02-12 Pedro Alves <palves@redhat.com>
861 Kevin Buettner <kevinb@redhat.com>
863 * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
864 TYPE_INSTANCE_FLAG_CODE_SPACE.
866 2014-02-12 Pedro Alves <palves@redhat.com>
868 * h8300-tdep.c (pseudo_from_raw_register)
869 (raw_from_pseudo_register): New functions.
870 (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
873 2014-02-12 Pedro Alves <palves@redhat.com>
875 * h8300-tdep.c (h8300_register_sim_regno): New function.
876 (h8300_gdbarch_init): Install h8300_register_sim_regno as
877 gdbarch_register_sim_regno hook.
879 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
881 * nios2-tdep.c (nios2_stub_frame_base): Remove global.
883 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
885 * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
887 2014-02-12 Mark Kettenis <kettenis@gnu.org>
889 * obsd-tdep.h (obsd_init_abi): New prototype.
890 * obsd-tdep.c: Define enum with OpenBSD signal numbers.
891 (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
892 (obsd_init_abi): New functions.
893 * i386obsd-tdep.c: Include "obsd-tdep.h".
894 (i386obsd_init_abi): Call obsd_init_abi.
895 * amd64obsd-tdep.c: Include "obsd-tdep.h".
896 (amd64obsd_init_abi): Call obsd_init_abi.
897 * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
898 obsd-tdep.c to gdb_target_obs.
900 2014-02-11 Jose E. Marchesi <jose.marchesi@oracle.com>
902 * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
903 double float arguments to 16-byte in the argument slots.
905 2014-02-11 Doug Evans <xdje42@gmail.com>
907 * configure.ac: Don't crash if pkg-config is not found and guile
908 wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
910 * configure: Regenerate.
912 2014-02-11 Yao Qi <yao@codesourcery.com>
914 * aix-thread.c (aix_thread_xfer_partial): Update comments.
915 * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
916 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
917 * gnu-nat.c (gnu_xfer_memory): Likewise.
918 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
919 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
920 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
921 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
923 2014-02-11 Yao Qi <yao@codesourcery.com>
925 * target.h (enum target_xfer_error): Rename to ...
926 (enum target_xfer_status): ... it. New. All users updated.
927 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
929 (TARGET_XFER_STATUS_ERROR_P): New macro.
930 (target_xfer_error_to_string): Remove declaration.
931 (target_xfer_status_to_string): Declare.
932 (target_xfer_partial_ftype): Adjust it.
933 (struct target_ops) <to_xfer_partial>: Return
934 target_xfer_status. Add argument xfered_len. Update
936 * target.c (target_xfer_error_to_string): Rename to ...
937 (target_xfer_status_to_string): ... it. New. All callers
939 (target_read_live_memory): Likewise. Call target_xfer_partial
940 instead of target_read.
941 (memory_xfer_live_readonly_partial): Return
942 target_xfer_status. Add argument xfered_len.
943 (raw_memory_xfer_partial): Likewise.
944 (memory_xfer_partial_1): Likewise.
945 (memory_xfer_partial): Likewise.
946 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
947 properly. Update debug message.
948 (default_xfer_partial, current_xfer_partial): Likewise.
949 (target_write_partial): Likewise.
950 (target_read_partial): Likewise. All callers updated.
951 (read_whatever_is_readable): Likewise.
952 (target_write_with_progress): Likewise.
953 (target_read_alloc_1): Likewise.
955 * aix-thread.c (aix_thread_xfer_partial): Likewise.
956 * auxv.c (procfs_xfer_auxv): Likewise.
957 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
958 * bfd-target.c (target_bfd_xfer_partial): Likewise.
959 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
960 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
961 * corefile.c (read_memory): Adjust.
962 * corelow.c (core_xfer_partial): Likewise.
963 * ctf.c (ctf_xfer_partial): Likewise.
964 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
966 (darwin_xfer_partial): Likewise.
967 * exec.c (section_table_xfer_memory_partial): Likewise. All
969 (exec_xfer_partial): Likewise.
970 * exec.h (section_table_xfer_memory_partial): Update
972 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
974 (gnu_xfer_partial): Likewise.
975 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
976 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
977 (ia64_hpux_xfer_solib_got): Likewise.
978 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
979 type of 'partial_len' to ULONGEST.
980 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
981 * linux-nat.c (linux_xfer_siginfo ): Likewise.
982 (linux_nat_xfer_partial): Likewise.
983 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
984 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
985 * monitor.c (monitor_xfer_memory): Likewise.
986 (monitor_xfer_partial): Likewise.
987 * procfs.c (procfs_xfer_partial): Likewise.
988 * record-btrace.c (record_btrace_xfer_partial): Likewise.
989 * record-full.c (record_full_xfer_partial): Likewise.
990 (record_full_core_xfer_partial): Likewise.
991 * remote-sim.c (gdbsim_xfer_memory): Likewise.
992 (gdbsim_xfer_partial): Likewise.
993 * remote.c (remote_write_bytes_aux): Likewise. All callers
995 (remote_write_bytes, remote_read_bytes): Likewise. All
997 (remote_flash_erase): Likewise. All callers updated.
998 (remote_write_qxfer): Likewise. All callers updated.
999 (remote_read_qxfer): Likewise. All callers updated.
1000 (remote_xfer_partial): Likewise.
1001 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1002 (rs6000_xfer_shared_libraries): Likewise.
1003 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1004 (sol_thread_xfer_partial): Likewise.
1005 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1006 (sparc_xfer_partial): Likewise.
1007 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
1009 (spu_xfer_partial): Likewise.
1010 * spu-multiarch.c (spu_xfer_partial): Likewise.
1011 * tracepoint.c (tfile_xfer_partial): Likewise.
1012 * windows-nat.c (windows_xfer_memory): Likewise.
1013 (windows_xfer_shared_libraries): Likewise.
1014 (windows_xfer_partial): Likewise.
1015 * valprint.c: Replace 'target_xfer_error' with
1016 'target_xfer_status' in comments.
1018 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
1020 Checked in by Joel Brobecker <brobecker@adacore.com>.
1021 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
1023 2014-02-11 Joel Brobecker <brobecker@adacore.com>
1025 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
1026 function parameters.
1028 2014-02-10 Will Newton <will.newton@linaro.org>
1030 * elfread.c (elf_rel_plt_read): Look for a .got section if
1031 looking up .got.plt fails.
1032 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
1033 on address passed to elf_gnu_ifunc_record_cache.
1034 (elf_gnu_ifunc_resolve_addr): Likewise.
1035 (elf_gnu_ifunc_resolver_return_stop): Likewise.
1037 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
1039 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
1040 (X_RETTURN): New macro.
1041 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
1043 * sparc64-tdep.c (sparc64_init_abi): Hook
1044 sparc_in_function_epilogue_p.
1046 2014-02-10 Gary Benson <gbenson@redhat.com>
1048 * symfile-debug.c (debug_qf_expand_symtabs_matching):
1049 Rename name_matcher to symbol_matcher.
1051 2014-02-10 Gary Benson <gbenson@redhat.com>
1053 * symfile-debug.c (debug_qf_expand_symtabs_matching):
1054 Use expand_symtabs_file_matcher_ftype and
1055 expand_symtabs_symbol_matcher_ftype.
1057 2014-02-10 Joel Brobecker <brobecker@adacore.com>
1059 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
1060 (struct ada_symbol_cache): New.
1061 (ada_free_symbol_cache): Forward declare.
1062 (struct ada_pspace_data): New.
1063 (ada_pspace_data_handle): New static global.
1064 (get_ada_pspace_data, ada_pspace_data_cleanup)
1065 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
1066 (cache_space, cache): Delete, now folded inside struct
1068 (ada_get_symbol_cache): New function.
1069 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
1071 (_initialize_ada_language): Remove initialization of cache_space.
1072 Move call to observer_attach_inferior_exit up, grouping it
1073 with the other observer registrations inside this function.
1074 Rename command to be more general. Add call to
1075 register_program_space_data_with_cleanup.
1077 2014-02-10 Joel Brobecker <brobecker@adacore.com>
1079 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
1080 ada_new_objfile_observer.
1081 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
1082 (_initialize_tasks): Update uses of ada_new_objfile_observer
1083 and ada_tasks_normal_stop_observer.
1085 2014-02-10 Joel Brobecker <brobecker@adacore.com>
1087 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
1088 returned by the 'Length attribute to integer.
1090 2014-02-10 Joel Brobecker <brobecker@adacore.com>
1092 * ada-lang.c (_initialize_ada_language): Initialize
1093 cache_space obstack.
1095 2014-02-10 Joel Brobecker <brobecker@adacore.com>
1097 * ada-lang.c (HASH_SIZE): New macro.
1098 (struct cache_entry): New type.
1099 (cache_space, cache): New static globals.
1100 (ada_clear_symbol_cache, find_entry): New functions.
1101 (lookup_cached_symbol, cache_symbol): Implement.
1102 (ada_new_objfile_observer, ada_free_objfile_observer): New.
1103 (_initialize_ada_language): Attach ada_new_objfile_observer
1104 and ada_free_objfile_observer.
1106 2014-02-10 Joel Brobecker <brobecker@adacore.com>
1108 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
1109 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
1110 struct block * parameter.
1111 (ada_lookup_symbol_list_worker): Constify local variable "block".
1112 Remove cast which is no longer necessary.
1114 2014-02-10 Doug Evans <xdje42@gmail.com>
1116 Add Guile as an extension language.
1117 * NEWS: Mention Guile scripting.
1118 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
1119 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
1120 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
1121 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
1122 (CLIBS): Add GUILE_LIBS.
1123 (install-guile): New rule.
1124 (guile.o): New rule.
1125 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
1126 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
1127 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
1128 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
1129 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
1130 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
1131 (scm-type.o, scm-utils.o, scm-value.o): New rules.
1132 * configure.ac: New option --with-guile.
1133 * configure: Regenerate.
1134 * config.in: Regenerate.
1135 * auto-load.c: Remove #include "python/python.h". Add #include
1136 "gdb/section-scripts.h".
1137 (source_section_scripts): Handle Guile scripts.
1138 (_initialize_auto_load): Add name of Guile objfile script to
1139 scripts-directory help text.
1140 * breakpoint.c (condition_command): Tweak comment to include Scheme.
1141 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
1142 (struct breakpoint): New member scm_bp_object.
1143 * defs.h (enum command_control_type): New value guile_control.
1144 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
1146 (show_user): Update comment.
1147 (_initialize_cli_cmds): Update help text for "show user". Update help
1148 text for max-user-call-depth.
1149 * cli/cli-script.c: Remove #include "python/python.h". Add #include
1151 (multi_line_command_p): Add guile_control.
1152 (print_command_lines): Handle guile_control.
1153 (execute_control_command, recurse_read_control_structure): Ditto.
1154 (process_next_line): Recognize "guile" commands.
1155 * disasm.c (gdb_disassemble_info): Make non-static.
1156 * disasm.h: #include "dis-asm.h".
1157 (struct gdbarch): Add forward decl.
1158 (gdb_disassemble_info): Declare.
1159 * extension.c: #include "guile/guile.h".
1160 (extension_languages): Add guile.
1161 (get_ext_lang_defn): Handle EXT_LANG_GDB.
1162 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
1163 * gdbtypes.c (get_unsigned_type_max): New function.
1164 (get_signed_type_minmax): New function.
1165 * gdbtypes.h (get_unsigned_type_max): Declare.
1166 (get_signed_type_minmax): Declare.
1167 * guile/README: New file.
1168 * guile/guile-internal.h: New file.
1169 * guile/guile.c: New file.
1170 * guile/guile.h: New file.
1171 * guile/scm-arch.c: New file.
1172 * guile/scm-auto-load.c: New file.
1173 * guile/scm-block.c: New file.
1174 * guile/scm-breakpoint.c: New file.
1175 * guile/scm-disasm.c: New file.
1176 * guile/scm-exception.c: New file.
1177 * guile/scm-frame.c: New file.
1178 * guile/scm-gsmob.c: New file.
1179 * guile/scm-iterator.c: New file.
1180 * guile/scm-lazy-string.c: New file.
1181 * guile/scm-math.c: New file.
1182 * guile/scm-objfile.c: New file.
1183 * guile/scm-ports.c: New file.
1184 * guile/scm-pretty-print.c: New file.
1185 * guile/scm-safe-call.c: New file.
1186 * guile/scm-string.c: New file.
1187 * guile/scm-symbol.c: New file.
1188 * guile/scm-symtab.c: New file.
1189 * guile/scm-type.c: New file.
1190 * guile/scm-utils.c: New file.
1191 * guile/scm-value.c: New file.
1192 * guile/lib/gdb.scm: New file.
1193 * guile/lib/gdb/boot.scm: New file.
1194 * guile/lib/gdb/experimental.scm: New file.
1195 * guile/lib/gdb/init.scm: New file.
1196 * guile/lib/gdb/iterator.scm: New file.
1197 * guile/lib/gdb/printing.scm: New file.
1198 * guile/lib/gdb/types.scm: New file.
1199 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
1200 (VPATH): Add $(GUILE_SRCDIR).
1201 (GUILE_DIR): New variable.
1202 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
1203 (all): Add stamp-guile dependency.
1204 (stamp-guile): New rule.
1205 (clean-guile, install-guile, uninstall-guile): New rules.
1206 (install-only): Add install-guile dependency.
1207 (uninstall): Add uninstall-guile dependency.
1208 (clean): Add clean-guile dependency.
1210 2014-02-09 Doug Evans <xdje42@gmail.com>
1212 Revert this patch (which I approved, mea culpa).
1214 2014-02-08 Mark Kettenis <kettenis@gnu.org>
1216 * Makefile.in (all-lib): Remove.
1217 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
1219 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1221 Fix Python stack corruption.
1222 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
1225 2014-02-08 Mark Kettenis <kettenis@gnu.org>
1227 * Makefile.in (all-lib): Remove.
1228 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
1230 2014-02-07 Doug Evans <dje@google.com>
1232 * extension-priv.h (extension_language_script_ops): Add comment.
1233 (extension_language_ops): Add comment.
1234 (active_ext_lang_state): Fix typo in comment.
1236 2014-02-07 Pedro Alves <palves@redhat.com>
1238 * infrun.c (handle_signal_stop) <signal arrives while stepping
1239 over a breakpoint>: Switch back to the stepping thread.
1241 2014-02-07 Yao Qi <yao@codesourcery.com>
1243 * target.c (target_xfer_partial): Return zero if LEN is zero.
1245 2014-02-07 Yao Qi <yao@codesourcery.com>
1247 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
1248 (ld_so_xfer_auxv): Likewise.
1249 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1250 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1251 * corelow.c (core_xfer_partial): Likewise.
1252 * ctf.c (ctf_xfer_partial): Likewise.
1253 * darwin-nat.c (darwin_read_dyld_info): Likewise.
1254 (darwin_xfer_partial): Likewise.
1255 * exec.c (exec_xfer_partial): Likewise.
1256 * gnu-nat.c (gnu_xfer_partial): Likewise.
1257 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
1258 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
1259 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
1260 * linux-nat.c (linux_xfer_siginfo): Likewise.
1261 (linux_proc_xfer_spu): Likewise.
1262 * procfs.c (procfs_xfer_partial): Likewise.
1263 * record-full.c (record_full_xfer_partial): Likewise.
1264 (record_full_core_xfer_partial): Likewise.
1265 * remote-sim.c (gdbsim_xfer_partial): Likewise.
1266 * remote.c (remote_write_qxfer): Likewise.
1267 (remote_write_qxfer, remote_read_qxfer): Likewise.
1268 (remote_xfer_partial): Likewise.
1269 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1270 (rs6000_xfer_shared_libraries): Likewise.
1271 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1272 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1273 (spu_xfer_partial): Likewise.
1274 * target.c (memory_xfer_partial_1): Likewise.
1275 * tracepoint.c (tfile_xfer_partial): Likewise.
1276 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
1277 (windows_xfer_partial): Likewise.
1279 2014-02-07 Yao Qi <yao@codesourcery.com>
1281 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
1283 (core_xfer_shared_libraries_aix): Likewise.
1284 * gdbarch.c, gdbarch.h: Regenerated.
1285 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
1286 ULONGEST. Change 'len_avail' type to ULONGEST.
1287 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1288 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1290 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
1292 2014-02-07 Yao Qi <yao@codesourcery.com>
1294 * corefile.c (memory_error): Get 'exception' from ERR and pass
1295 'exception' to throw_error.
1297 2014-02-06 Doug Evans <xdje42@gmail.com>
1299 * configure.ac (libpython checking): Remove all but python.o from
1300 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
1301 * configure: Regenerate.
1303 * Makefile.in (SFILES): Add extension.c.
1304 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
1305 (COMMON_OBS): Add extension.o.
1306 * extension.h: New file.
1307 * extension-priv.h: New file.
1308 * extension.c: New file.
1310 * python/python-internal.h: #include "extension.h".
1311 (gdbpy_auto_load_enabled): Declare.
1312 (gdbpy_apply_val_pretty_printer): Declare.
1313 (gdbpy_apply_frame_filter): Declare.
1314 (gdbpy_preserve_values): Declare.
1315 (gdbpy_breakpoint_cond_says_stop): Declare.
1316 (gdbpy_breakpoint_has_cond): Declare.
1317 (void source_python_script_for_objfile): Delete.
1318 * python/python.c: #include "extension-priv.h".
1319 Delete inclusion of "observer.h".
1320 (extension_language_python): Moved here and renamed from
1321 script_language_python in py-auto-load.c.
1322 Redefined to be of type extension_language_defn.
1323 (python_extension_script_ops): New global.
1324 (python_extension_ops): New global.
1325 (struct python_env): New member previous_active.
1326 (restore_python_env): Call restore_active_ext_lang.
1327 (ensure_python_env): Call set_active_ext_lang.
1328 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
1330 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
1332 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
1334 (gdbpy_eval_from_control_command): Renamed from
1335 eval_python_from_control_command, made static. New arg extlang.
1336 (gdbpy_source_script) Renamed from source_python_script, made static.
1338 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
1339 result to int. New arg extlang.
1340 (gdbpy_source_objfile_script): Renamed from
1341 source_python_script_for_objfile, made static. New arg extlang.
1342 (gdbpy_start_type_printers): Renamed from start_type_printers, made
1343 static. New args extlang, extlang_printers. Change result type to
1345 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
1346 static. New arg extlang. Rename arg printers to extlang_printers
1347 and change type to ext_lang_type_printers *.
1348 (gdbpy_free_type_printers): Renamed from free_type_printers, made
1349 static. Replace argument arg with extlang, extlang_printers.
1350 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
1351 (!HAVE_PYTHON, source_python_script): Delete.
1352 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
1353 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
1354 (!HAVE_PYTHON, start_type_printers): Delete.
1355 (!HAVE_PYTHON, apply_type_printers): Delete.
1356 (!HAVE_PYTHON, free_type_printers): Delete.
1357 (_initialize_python): Delete call to observer_attach_before_prompt.
1358 (finalize_python): Set/restore active extension language.
1359 (gdbpy_finish_initialization) Renamed from
1360 finish_python_initialization, made static. New arg extlang.
1361 (gdbpy_initialized): New function.
1362 * python/python.h: #include "extension.h". Delete #include
1363 "value.h", "mi/mi-cmds.h".
1364 (extension_language_python): Declare.
1365 (GDBPY_AUTO_FILE_NAME): Delete.
1366 (enum py_bt_status): Moved to extension.h and renamed to
1368 (enum frame_filter_flags): Moved to extension.h.
1369 (enum py_frame_args): Moved to extension.h and renamed to
1370 ext_lang_frame_args.
1371 (finish_python_initialization): Delete.
1372 (eval_python_from_control_command): Delete.
1373 (source_python_script): Delete.
1374 (apply_val_pretty_printer): Delete.
1375 (apply_frame_filter): Delete.
1376 (preserve_python_values): Delete.
1377 (gdbpy_script_language_defn): Delete.
1378 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
1379 (start_type_printers, apply_type_printers, free_type_printers): Delete.
1381 * auto-load.c: #include "extension.h".
1382 (GDB_AUTO_FILE_NAME): Delete.
1383 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
1384 (script_language_gdb): Delete, moved to extension.c and renamed to
1385 extension_language_gdb.
1386 (source_gdb_script_for_objfile): Delete.
1387 (auto_load_pspace_info): New member unsupported_script_warning_printed.
1388 (loaded_script): Change type of language member to
1389 struct extension_language_defn *.
1390 (init_loaded_scripts_info): Initialize
1391 unsupported_script_warning_printed.
1392 (maybe_add_script): Make static. Change type of language arg to
1393 struct extension_language_defn *.
1394 (clear_section_scripts): Reset unsupported_script_warning_printed.
1395 (auto_load_objfile_script_1): Rewrite to use extension language API.
1396 (auto_load_objfile_script): Make public. Remove support-compiled-in
1397 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
1398 (source_section_scripts): Rewrite to use extension language API.
1399 (load_auto_scripts_for_objfile): Rewrite to use
1400 auto_load_scripts_for_objfile.
1401 (collect_matching_scripts_data): Change type of language member to
1402 struct extension_language_defn *.
1403 (auto_load_info_scripts): Change type of language arg to
1404 struct extension_language_defn *.
1405 (unsupported_script_warning_print): New function.
1406 (script_not_found_warning_print): Make static.
1407 (_initialize_auto_load): Rewrite construction of scripts-directory
1409 * auto-load.h (struct objfile): Add forward decl.
1410 (struct script_language): Delete.
1411 (struct auto_load_pspace_info): Add forward decl.
1412 (struct extension_language_defn): Add forward decl.
1413 (maybe_add_script): Delete.
1414 (auto_load_objfile_script): Declare.
1415 (script_not_found_warning_print): Delete.
1416 (auto_load_info_scripts): Update prototype.
1417 (auto_load_gdb_scripts_enabled): Declare.
1418 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
1419 auto_load_python_scripts_enabled and made public.
1420 (script_language_python): Delete, moved to python.c.
1421 (gdbpy_script_language_defn): Delete.
1422 (info_auto_load_python_scripts): Update to use
1423 extension_language_python.
1425 * breakpoint.c (condition_command): Replace call to
1426 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
1427 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
1428 with call to breakpoint_ext_lang_cond_says_stop.
1429 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
1430 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
1431 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
1432 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
1434 (local_setattro): Print name of extension language with existing
1437 * valprint.c (val_print, value_print): Update to call
1438 apply_ext_lang_val_pretty_printer.
1439 * cp-valprint.c (cp_print_value): Update call to
1440 apply_ext_lang_val_pretty_printer.
1441 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
1442 (gdbpy_apply_val_pretty_printer): Renamed from
1443 apply_val_pretty_printer. New arg extlang.
1444 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
1446 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
1447 extension language API.
1448 * cli/cli-script.c (execute_control_command): Update to call
1449 eval_ext_lang_from_control_command.
1451 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
1452 enum ext_lang_bt_status values. Update call to
1453 apply_ext_lang_frame_filter.
1454 (mi_cmd_stack_list_locals): Ditto.
1455 (mi_cmd_stack_list_args): Ditto.
1456 (mi_cmd_stack_list_variables): Ditto.
1457 * mi/mi-main.c: Delete #include "python/python-internal.h".
1458 Add #include "extension.h".
1459 (mi_cmd_list_features): Replace reference to python internal variable
1460 gdb_python_initialized with call to ext_lang_initialized_p.
1462 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
1463 Update to use enum ext_lang_frame_args. Update to call
1464 apply_ext_lang_frame_filter.
1465 * python/py-framefilter.c (extract_sym): Update to use enum
1467 (extract_value, py_print_type, py_print_value): Ditto.
1468 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
1469 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
1470 (py_print_frame): Ditto.
1471 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
1472 New arg extlang. Update to use enum ext_lang_bt_status.
1474 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
1475 finish_python_initialization. Replace with call to
1476 finish_ext_lang_initialization.
1478 * typeprint.c (do_free_global_table): Update to call
1479 free_ext_lang_type_printers.
1480 (create_global_typedef_table): Update to call
1481 start_ext_lang_type_printers.
1482 (find_global_typedef): Update to call apply_ext_lang_type_printers.
1483 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
1484 (type_print_options): Change type of global_printers from "void *"
1485 to "struct ext_lang_type_printers *".
1487 * value.c (preserve_values): Update to call preserve_ext_lang_values.
1488 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
1489 (gdbpy_preserve_values): Renamed from preserve_python_values.
1491 (!HAVE_PYTHON, preserve_python_values): Delete.
1493 * utils.c (quit_flag): Delete, moved to extension.c.
1494 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
1497 * eval.c: Delete #include "python/python.h".
1498 * main.c: Delete #include "python/python.h".
1500 * defs.h: Update comment.
1502 2014-02-06 Joel Brobecker <brobecker@adacore.com>
1506 2014-02-05 Mark Kettenis <kettenis@gnu.org>
1508 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
1511 2014-02-05 Yao Qi <yao@codesourcery.com>
1513 * remote.c (remote_pass_signals): Remove local 'buf' and use
1515 (remote_program_signals): Likewise.
1517 2014-02-05 Yao Qi <yao@codesourcery.com>
1519 * ctf.c: Include "inferior.h" and "gdbthread.h".
1520 (CTF_PID): A new macro.
1521 (ctf_open): Call inferior_appeared and add_thread_silent.
1522 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
1523 (ctf_thread_alive): New function.
1524 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
1526 2014-02-05 Yao Qi <yao@codesourcery.com>
1530 2013-05-24 Yao Qi <yao@codesourcery.com>
1532 * tracepoint.c (TFILE_PID): Remove.
1533 (tfile_open): Don't add thread and inferior.
1534 (tfile_close): Don't set 'inferior_ptid'. Don't call
1535 exit_inferior_silent.
1536 (tfile_thread_alive): Remove.
1537 (init_tfile_ops): Don't set field 'to_thread_alive' of
1540 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
1542 * remote.c (remote_start_remote): Call remote_check_symbols even
1543 if only symbol-file (not file) has been given.
1545 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1547 * gdbarch.sh (skip_entrypoint): New callback.
1548 * gdbarch.c, gdbarch.h: Regenerate.
1549 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
1550 * infrun.c (fill_in_stop_func): Likewise.
1551 * ppc-linux-tdep.c: Include "elf/ppc64.h".
1552 (ppc_elfv2_elf_make_msymbol_special): New function.
1553 (ppc_elfv2_skip_entrypoint): Likewise.
1554 (ppc_linux_init_abi): Install them for ELFv2.
1556 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1558 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
1559 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
1560 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
1561 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
1562 structures returned in GPRs.
1564 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1566 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
1567 offset to the stack parameter list for the ELFv2 ABI.
1569 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1571 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
1572 set_gdbarch_convert_from_func_ptr_addr and
1573 set_gdbarch_elf_make_msymbol_special for ELFv1.
1574 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
1575 function descriptors on ELFv1.
1576 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
1577 set up r12 at function entry.
1579 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1581 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
1582 (struct gdbarch_tdep): New member elf_abi.
1584 * rs6000-tdep.c: Include "elf/ppc64.h".
1585 (rs6000_gdbarch_init): Detect ELF ABI version.
1587 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1589 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
1590 within a register pair holding a DFP 128-bit value on little-endian.
1591 (ppc64_sysv_abi_return_value_base): Likewise.
1592 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
1593 (dfp_pseudo_register_write): Likewise.
1595 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1597 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
1598 offset on little-endian when passing _Decimal32.
1599 (ppc64_sysv_abi_return_value_base): Likewise for return values.
1601 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1603 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
1604 of the overlapped FP register within the VSX register on little-
1606 (efpr_pseudo_register_write): Likewise.
1608 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1610 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
1611 offset on little-endian when passing small structures.
1613 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1615 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
1616 (struct ppc64_sysv_argpos): New data structure.
1617 (ppc64_sysv_abi_push_float): Remove.
1618 (ppc64_sysv_abi_push_val): New function.
1619 (ppc64_sysv_abi_push_integer): Likewise.
1620 (ppc64_sysv_abi_push_freg): Likewise.
1621 (ppc64_sysv_abi_push_vreg): Likewise.
1622 (ppc64_sysv_abi_push_param): Likewise.
1623 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
1624 (ppc64_sysv_abi_return_value_base): New function.
1625 (ppc64_sysv_abi_return_value): Refactor to use it.
1627 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
1629 * NEWS: Document new target powerpc64le-*-linux*.
1631 2014-02-04 Mark Kettenis <kettenis@gnu.org>
1633 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
1634 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
1636 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
1637 register set used in ELF core dumps. Add floating-point register set.
1639 2014-02-03 Kevin Buettner <kevinb@redhat.com>
1641 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
1642 dwarf2_to_gdb[] table using symbolic constants. Adjust
1643 penultimate entry from number representing the PC register
1644 to symbolic constant representing the MDR register. Add
1645 constant for the PC register to the end of the table.
1647 2014-02-03 Mark Kettenis <kettenis@gnu.org>
1649 * bsd-kvm.c: Include <sys/param.h>
1651 2014-02-03 Mark Kettenis <kettenis@gnu.org>
1653 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
1655 2014-01-31 Joel Brobecker <brobecker@adacore.com>
1657 * ada-lang.h (clear_ada_sym_cache): Delete.
1659 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
1661 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
1663 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
1665 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
1666 the sigreturn register save area only if the syscall is
1669 2014-01-29 Joel Brobecker <brobecker@adacore.com>
1671 * valops.c (value_slice): Minor reformatting.
1673 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
1675 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
1677 2014-01-28 Joel Brobecker <brobecker@adacore.com>
1679 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
1681 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
1682 (ada_ignore_descriptive_types_p): New static global.
1683 (find_parallel_type_by_descriptive_type): Return immediately
1684 if ada_ignore_descriptive_types_p is set.
1685 (_initialize_ada_language): Register new commands "maintenance
1686 set ada", "maintenance show ada", "maintenance set ada
1687 ignore-descriptive-types" and "maintenance show ada
1688 ignore-descriptive-types".
1689 * NEWS: Add entry for new "maint ada set/show
1690 ignore-descriptive-types" commands.
1692 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
1694 * record-btrace.c (record_btrace_close): Call btrace_teardown
1697 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1699 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
1702 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1704 * ada-typeprint (type_is_full_subrange_of_target_type):
1706 (print_range): Add parameter bounds_prefered_p. If not set,
1707 try printing range types using the name of their base type.
1708 (print_range_type): Add parameter bounds_prefered_p.
1709 Use it in call to print_range.
1710 (print_array_type, ada_print_type): Update calls to print_range
1711 and print_range_type.
1713 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1715 * ada-typeprint.c (print_array_type, print_choices, print_range)
1716 (print_range_bound, print_dynamic_range_bound, print_range_type):
1719 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1721 * ada-typeprint.c (print_range): Add missing empty line
1722 after local declaration.
1724 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1726 * ada-valprint.c (print_optional_low_bound): Get index_type's
1727 target type for as long as it is a TYPE_CODE_RANGE.
1729 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1731 * procfs.c (procfs_make_note_section): Remove assertion and
1734 2014-01-24 Yao Qi <yao@codesourcery.com>
1736 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
1737 * corelow.c (get_core_siginfo): Likewise.
1739 2014-01-24 Yao Qi <yao@codesourcery.com>
1741 * remote.c (remote_write_bytes_aux): Change type of 'len' to
1742 ULONGEST. Don't check 'len' is negative.
1743 (remote_write_bytes): Change type of 'len' to ULONGEST.
1745 2014-01-23 Tom Tromey <tromey@redhat.com>
1748 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
1749 Handle exception from frame.block.
1750 (FrameVars.fetch_frame_locals): Likewise.
1752 2014-01-23 Tom Tromey <tromey@redhat.com>
1755 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
1756 on a NULL pointer. Move "goto error" to correct place.
1758 2014-01-23 Tom Tromey <tromey@redhat.com>
1761 * python/py-framefilter.c (apply_frame_filter): Call
1762 ensure_python_env after computing gdbarch.
1764 2014-01-23 Yao Qi <yao@codesourcery.com>
1766 * target.c (raw_memory_xfer_partial): Change argument type
1767 from void * to gdb_byte *.
1768 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
1770 2014-01-22 Doug Evans <dje@google.com>
1772 New gdbserver option --debug-format=timestamp.
1775 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
1777 * syscalls/s390x-linux.xml: New file.
1778 * syscalls/s390-linux.xml: New file.
1779 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
1780 (XML_SYSCALL_FILENAME_S390X): Likewise.
1781 (op_svc): New enum value for SVC opcode.
1782 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
1783 (s390_linux_get_syscall_number): New function.
1784 (s390_gdbarch_init): Register '*get_syscall_number' and the
1785 syscall xml file name.
1786 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1787 "s390-linux.xml" and "s390x-linux.xml".
1788 * NEWS: Announce new feature.
1790 2014-01-22 Baruch Siach <baruch@tkos.co.il>
1792 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
1794 2014-01-22 Pedro Alves <palves@redhat.com>
1796 * xtensa-config.c: Include defs.h.
1798 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1800 * common/common-utils.h: Add "ARI:" comment beside __func__
1803 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1805 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
1806 documentation a bit.
1808 2014-01-21 Roland McGrath <mcgrathr@google.com>
1810 * configure.ac: Call AM_PROG_INSTALL_STRIP.
1811 * configure: Regenerate.
1812 * aclocal.m4: Regenerate.
1813 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
1814 New substituted variables.
1815 (install-strip): New target.
1816 (INSTALL_SCRIPT): New substituted variable.
1817 (FLAGS_TO_PASS): Add it.
1818 (install-only): Use $(INSTALL_SCRIPT) rather than
1819 $(INSTALL_PROGRAM) for gcore.
1821 2014-01-20 Tom Tromey <tromey@redhat.com>
1823 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
1826 2014-01-20 Tom Tromey <tromey@redhat.com>
1828 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
1829 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
1830 (deprecated_cmd_warning, complete_on_cmdlist): Update.
1831 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
1832 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
1833 (struct cmd_list_element) <flags>: Remove.
1834 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
1835 doc_allocated>: New fields.
1836 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
1838 * maint.c (maintenance_do_deprecate): Update.
1839 * top.c (execute_command): Update.
1841 2014-01-20 Baruch Siach <baruch@tkos.co.il>
1843 * xtensa-linux-nat.c: Include asm/ptrace.h.
1845 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1847 * Makefile.in (SFILES): Add d-support.c.
1848 (COMMON_OBS): Add d-support.o.
1849 * d-lang.h (d_parse_symbol): Add comment, now defined in
1851 * d-lang.c (parse_call_convention)
1852 (parse_attributes, parse_function_types)
1853 (parse_function_args, parse_type, parse_identifier)
1854 (call_convention_p, d_parse_symbol): Move functions to ...
1855 * d-support.c: ... New file.
1857 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1859 * d-lang.h (d_parse_symbol): Add declaration.
1860 * d-lang.c (extract_identifiers)
1861 (extract_type_info): Remove functions.
1862 (parse_call_convention, parse_attributes)
1863 (parse_function_types, parse_function_args)
1864 (parse_type, parse_identifier, call_convention_p)
1865 (d_parse_symbol): New functions.
1866 (d_demangle): Use d_parse_symbol to demangle D symbols.
1868 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1870 * d-lang.h (struct builtin_d_type): New data type.
1871 (builtin_d_type): Add declaration.
1872 * d-lang.c (d_language_arch_info, build_d_types)
1873 (builtin_d_type): New functions.
1874 (enum d_primitive_types): New data type.
1875 (d_language_defn): Change c_language_arch_info to
1876 d_language_arch_info.
1877 (d_type_data): New static variable.
1878 (_initialize_d_language): Initialize d_type_data.
1880 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1882 * d-lang.h (d_main_name): Add declaration.
1883 * d-lang.c (d_main_name): New function.
1884 * symtab.c (find_main_name): Add call to d_main_name.
1886 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1888 * d-lang.c (d_language_defn): Change macro_expansion_c to
1891 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1893 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1895 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
1897 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1898 gdb_exception" declaration.
1899 * remote.c (getpkt_or_notif_sane): Likewise.
1901 2014-01-17 Doug Evans <dje@google.com>
1903 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1904 function, contents of dirnames_to_char_ptr_vec_append moved here.
1905 (delim_string_to_char_ptr_vec): New function.
1906 (dirnames_to_char_ptr_vec_append): Rewrite.
1907 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1909 2014-01-17 Doug Evans <dje@google.com>
1911 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1913 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1914 #include "common-utils.h".
1915 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1916 * common/vec.h (VEC_ASSERT_PASS): Update.
1917 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1918 (MACH_CHECK_ERROR): Update.
1920 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1922 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1924 * gdbarch.h: Regenerate.
1926 2014-01-16 Tom Tromey <tromey@redhat.com>
1928 * value.c (struct value) <regnum>: Move earlier.
1930 2014-01-16 Tom Tromey <tromey@redhat.com>
1932 * remote.c (extended_remote_create_inferior): Rename from
1933 extended_remote_create_inferior_1. Add "ops" argument. Remove
1936 2014-01-16 Pedro Alves <palves@redhat.com>
1938 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1939 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1942 2014-01-16 Doug Evans <dje@google.com>
1944 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1946 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1948 * btrace.h (btrace_thread_flag): New.
1949 (struct btrace_thread_info) <flags>: New.
1950 * record-btrace.c (record_btrace_resume_thread)
1951 (record_btrace_find_thread_to_move, btrace_step_no_history)
1952 (btrace_step_stopped, record_btrace_start_replaying)
1953 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1954 (record_btrace_find_resume_thread): New.
1955 (record_btrace_resume, record_btrace_wait): Extend.
1956 (record_btrace_can_execute_reverse): New.
1957 (record_btrace_open): Fail in non-stop mode.
1958 (record_btrace_set_replay): Split into this, ...
1959 (record_btrace_stop_replaying): ... this, ...
1960 (record_btrace_clear_histories): ... and this.
1961 (init_record_btrace_ops): Init to_can_execute_reverse.
1962 * NEWS: Announce it.
1964 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1966 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1967 (forward_target_decr_pc_after_break)
1968 (target_decr_pc_after_break): New.
1969 * target.c (forward_target_decr_pc_after_break)
1970 (target_decr_pc_after_break): New.
1971 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1972 instead of gdbarch_decr_pc_after_break.
1973 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1974 instead of gdbarch_decr_pc_after_break.
1975 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1976 instead of gdbarch_decr_pc_after_break.
1977 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1978 instead of gdbarch_decr_pc_after_break.
1979 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1980 instead of gdbarch_decr_pc_after_break.
1981 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1982 instead of gdbarch_decr_pc_after_break.
1984 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1986 * btrace.c: Include regcache.h.
1987 (btrace_add_pc): New.
1988 (btrace_enable): Call btrace_add_pc.
1989 (btrace_is_empty): New.
1990 * btrace.h (btrace_is_empty): New.
1991 * record-btrace.c (require_btrace, record_btrace_info): Call
1994 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1996 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1997 Support delta reads.
1998 (linux_disable_btrace): Change return type.
1999 * common/linux-btrace.h (linux_read_btrace): Change parameters
2000 and return type to allow error reporting. Update users.
2001 (linux_disable_btrace): Change return type. Update users.
2002 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
2004 (btrace_error): New.
2005 (btrace_block) <begin>: Comment on BEGIN == 0.
2006 * btrace.c (btrace_compute_ftrace): Start from the end of
2008 (btrace_stitch_trace, btrace_clear_history): New.
2009 (btrace_fetch): Read delta trace, return if replaying.
2010 (btrace_clear): Move clear history code to btrace_clear_history.
2011 (parse_xml_btrace): Throw an error if parsing failed.
2012 * target.h (struct target_ops) <to_read_btrace>: Change parameters
2013 and return type to allow error reporting.
2014 (target_read_btrace): Change parameters and return type to allow
2016 * target.c (target_read_btrace): Update.
2017 * remote.c (remote_read_btrace): Support delta reads. Pass
2019 * NEWS: Announce it.
2021 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2023 * record.h (record_btrace_frame_unwind)
2024 (record_btrace_tailcall_frame_unwind): New declarations.
2025 * dwarf2-frame: Include record.h
2026 (dwarf2_frame_cfa): Throw an error for btrace frames.
2027 * record-btrace.c: Include hashtab.h.
2028 (btrace_get_bfun_name): New.
2029 (btrace_call_history): Call btrace_get_bfun_name.
2030 (struct btrace_frame_cache): New.
2032 (bfcache_hash, bfcache_eq, bfcache_new): New.
2033 (btrace_get_frame_function): New.
2034 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
2035 (record_btrace_frame_this_id): Compute own id.
2036 (record_btrace_frame_prev_register): Provide PC, throw_error
2037 for all other registers.
2038 (record_btrace_frame_sniffer): Detect btrace frames.
2039 (record_btrace_tailcall_frame_sniffer): New.
2040 (record_btrace_frame_dealloc_cache): New.
2041 (record_btrace_frame_unwind): Add new functions.
2042 (record_btrace_tailcall_frame_unwind): New.
2043 (_initialize_record_btrace): Allocate cache.
2044 * btrace.c (btrace_clear): Call reinit_frame_cache.
2045 * NEWS: Announce it.
2047 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2049 * record-btrace.c (record_btrace_set_replay)
2050 (record_btrace_goto_begin, record_btrace_goto_end)
2051 (record_btrace_goto): New.
2052 (init_record_btrace_ops): Initialize them.
2053 * NEWS: Announce it.
2055 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2057 * record-btrace.c (record_btrace_find_new_threads)
2058 (record_btrace_thread_alive): New.
2059 (init_record_btrace_ops): Initialize to_find_new_threads and
2062 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2064 * record-btrace.c (record_btrace_resume): New.
2065 (record_btrace_wait): New.
2066 (init_record_btrace_ops): Initialize to_wait and to_resume.
2068 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2070 * record-btrace.c (record_btrace_xfer_partial)
2071 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
2072 (record_btrace_allow_memory_access): New.
2073 (init_record_btrace_ops): Initialize new methods.
2074 * target.c (raw_memory_xfer_partial): Bail out if target reports
2075 that this memory is not available.
2077 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2079 * target.h (target_ops) <to_insert_breakpoint>
2080 <to_remove_breakpoint>: Add target_ops parameter.
2081 (forward_target_insert_breakpoint): New.
2082 (forward_target_remove_breakpoint): New.
2083 (memory_remove_breakpoint, memory_insert_breakpoint):
2084 Add target_ops parameter.
2085 * target.c (target_insert_breakpoint): Split into this and ...
2086 (forward_target_insert_breakpoint): ... this.
2087 (target_remove_breakpoint): Split into this and ...
2088 (forward_target_remove_breakpoint): ... this.
2089 (debug_to_insert_breakpoint): Add target_ops parameter.
2090 Call forward_target_insert_breakpoint.
2091 (debug_to_remove_breakpoint): Add target_ops parameter.
2092 Call forward_target_remove_breakpoint.
2093 (update_current_target): Do not inherit or default to_insert_breakpoint
2094 and to_remove_breakpoint.
2095 * corelow.c (ignore): Add target_ops parameter.
2096 * exec.c (ignore): Add target_ops parameter.
2097 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
2098 Add target_ops parameter.
2099 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
2100 Add target_ops parameter.
2101 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
2102 Add target_ops parameter.
2103 * record-full.c (record_full_beneath_to_insert_breakpoint)
2104 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
2105 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
2106 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
2107 (record_full_core_remove_breakpoint): Add target_ops parameter.
2109 (record_full_beneath_to_insert_breakpoint_ops)
2110 (record_full_beneath_to_remove_breakpoint_ops)
2111 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
2112 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
2113 tmp_to_remove_breakpoint_ops,
2114 record_full_beneath_to_insert_breakpoint_ops, and
2115 record_full_beneath_to_remove_breakpoint_ops.
2116 * remote-m32r-sdi.c (m32r_insert_breakpoint)
2117 (m32r_remove_breakpoint): Add target_ops parameter.
2118 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
2119 Add target_ops parameter.
2120 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
2121 Add target_ops parameter.
2123 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2124 Markus Metzger <markus.t.metzger@intel.com>
2126 * record-btrace.c: Include frame-unwind.h.
2127 (record_btrace_frame_unwind_stop_reason)
2128 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
2129 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
2131 (init_record_btrace_ops): Install it.
2133 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2135 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
2138 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2140 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
2143 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2145 * frame-unwind.c: Include target.h.
2146 (frame_unwind_try_unwinder): New function with code from ...
2147 (frame_unwind_find_by_frame): ... here. New variable
2148 unwinder_from_target, call also target_get_unwinder)
2149 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
2150 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
2151 * target.h (struct target_ops): New fields to_get_unwinder and
2152 to_get_tailcall_unwinder.
2153 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
2155 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2157 * record-btrace.c (record_btrace_fetch_registers)
2158 (record_btrace_store_registers)
2159 (record_btrace_to_prepare_to_store): New.
2160 (init_record_btrace_ops): Add the above.
2162 2014-01-16 Tom Tromey <tromey@redhat.com>
2164 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
2165 * target.h (struct target_ops) <to_prepare_to_store>: Add
2167 (target_prepare_to_store): Add argument.
2168 * target.c (debug_to_prepare_to_store): Add argument.
2169 (update_current_target): Update.
2170 * remote.c (remote_prepare_to_store): Add 'self' argument.
2171 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
2172 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
2173 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
2174 * record-full.c (record_full_core_prepare_to_store): Add 'self'
2176 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
2177 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
2178 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
2179 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
2180 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
2182 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2184 * btrace.h (replay) <replay>: New.
2185 (btrace_is_replaying): New.
2186 * btrace.c (btrace_clear): Free replay iterator.
2187 (btrace_is_replaying): New.
2188 * record-btrace.c (record_btrace_is_replaying): New.
2189 (record_btrace_info): Print insn number if replaying.
2190 (record_btrace_insn_history): Start at replay position.
2191 (record_btrace_call_history): Start at replay position.
2192 (init_record_btrace_ops): Init to_record_is_replaying.
2194 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2196 * record-btrace.c (record_btrace_insn_history_range): Include
2198 (record_btrace_insn_history_from): Adjust range.
2199 (record_btrace_call_history_range): Include
2201 (record_btrace_call_history_from): Adjust range.
2202 * NEWS: Announce changes.
2204 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2206 * record.h (enum record_print_flag)
2207 <record_print_indent_calls>: New.
2208 * record.c (get_call_history_modifiers): Recognize /c modifier.
2209 (_initialize_record): Document /c modifier.
2210 * record-btrace.c (btrace_call_history): Add btinfo parameter.
2211 Reorder fields. Optionally indent the function name. Update
2213 * NEWS: Announce changes.
2215 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2217 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
2219 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2221 * btrace.c (ftrace_new_function): Start counting at one.
2222 * record-btrace.c (record_btrace_info): Adjust number of calls
2224 * NEWS: Announce it.
2226 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2228 * record-btrace.c (btrace_call_history_insn_range): Print
2229 insn range as [begin, end].
2231 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2233 * btrace.h (struct btrace_func_link): New.
2234 (enum btrace_function_flag): New.
2235 (struct btrace_inst): Rename to ...
2236 (struct btrace_insn): ...this. Update all users.
2237 (struct btrace_func) <ibegin, iend>: Remove.
2238 (struct btrace_func_link): New.
2239 (struct btrace_func): Rename to ...
2240 (struct btrace_function): ...this. Update all users.
2241 (struct btrace_function) <segment, flow, up, insn, insn_offset)
2242 (number, level, flags>: New.
2243 (struct btrace_insn_iterator): Rename to ...
2244 (struct btrace_insn_history): ...this.
2246 (struct btrace_insn_iterator, btrace_call_iterator): New.
2247 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
2248 (struct btrace_target_info) <begin, end, level>
2249 <insn_history, call_history>: New.
2250 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
2251 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
2252 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
2253 (btrace_call_number, btrace_call_begin, btrace_call_end)
2254 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
2255 (btrace_find_function_by_number, btrace_set_insn_history)
2256 (btrace_set_call_history): New.
2257 * btrace.c (btrace_init_insn_iterator)
2258 (btrace_init_func_iterator, compute_itrace): Remove.
2259 (ftrace_print_function_name, ftrace_print_filename)
2260 (ftrace_skip_file): Change
2262 (ftrace_init_func): Remove.
2263 (ftrace_debug): Use new btrace_function fields.
2264 (ftrace_function_switched): Also consider gaining and
2265 losing symbol information).
2266 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
2267 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
2268 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
2270 (ftrace_new_function): Move. Remove debug print.
2271 (ftrace_update_lines, ftrace_update_insns): New.
2272 (ftrace_update_function): Check for call, ret, and jump.
2273 (compute_ftrace): Renamed to ...
2274 (btrace_compute_ftrace): ...this. Rewritten to compute call
2276 (btrace_fetch, btrace_clear): Updated.
2277 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
2278 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
2279 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
2280 (btrace_call_number, btrace_call_begin, btrace_call_end)
2281 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
2282 (btrace_find_function_by_number, btrace_set_insn_history)
2283 (btrace_set_call_history): New.
2284 * record-btrace.c (require_btrace): Use new btrace thread
2286 (record_btrace_info, btrace_insn_history)
2287 (record_btrace_insn_history, record_btrace_insn_history_range):
2288 Use new btrace thread info fields and new iterator.
2289 (btrace_func_history_src_line): Rename to ...
2290 (btrace_call_history_src_line): ...this. Use new btrace
2292 (btrace_func_history): Rename to ...
2293 (btrace_call_history): ...this. Use new btrace thread info
2294 fields and new iterator.
2295 (record_btrace_call_history, record_btrace_call_history_range):
2296 Use new btrace thread info fields and new iterator.
2298 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2300 * frame.h (frame_id_build_unavailable_stack_special): New.
2301 * frame.c (frame_id_build_unavailable_stack_special): New.
2303 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2305 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
2306 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
2307 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
2309 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
2310 (i386_insn_is_jump, i386_jmp_p): New.
2311 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
2312 insn_is_jump to gdbarch.
2313 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
2314 * gdbarch.h: Regenerated.
2315 * gdbarch.c: Regenerated.
2316 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
2317 (default_insn_is_jump): New.
2318 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
2319 (default_insn_is_jump): New.
2321 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2323 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
2325 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
2326 (btrace_read_type) <btrace_read_new>: Change to ...
2327 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
2329 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2331 * common/linux-btrace.c (linux_read_btrace): Free trace from
2334 2014-01-15 Doug Evans <dje@google.com>
2336 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
2339 2014-01-15 Tom Tromey <tromey@redhat.com>
2341 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
2342 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
2343 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
2344 (set_objfile_main_name): New function.
2345 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
2346 language_of_main>: New fields.
2347 (set_objfile_main_name): Declare.
2348 * symtab.c (find_main_name): Loop over objfiles to find the main
2350 (set_main_name): Now static.
2351 (get_main_info): Add comment.
2352 * symtab.h (set_main_name): Don't declare.
2354 2014-01-15 Tom Tromey <tromey@redhat.com>
2356 * symtab.c (main_progspace_key): New global.
2357 (struct main_info): New.
2358 (name_of_main, language_of_main): Remove.
2359 (get_main_info, main_info_cleanup): New function.
2360 (set_main_name, main_name, main_language): Use get_main_info.
2361 (_initialize_symtab): Initialize main_progspace_key.
2363 2014-01-15 Tom Tromey <tromey@redhat.com>
2365 * dbxread.c (process_one_symbol): Update.
2366 * dwarf2read.c (read_partial_die): Update.
2367 * symfile.c (set_initial_language): Call main_language.
2368 * symtab.c (language_of_main): Now static.
2369 (set_main_name): Add 'lang' parameter.
2370 (find_main_name): Update.
2371 (main_language): New function.
2372 (symtab_observer_executable_changed): Update.
2373 * symtab.h (set_main_name): Update.
2374 (language_of_main): Remove.
2375 (main_language): Declare.
2377 2014-01-15 Tom Tromey <tromey@redhat.com>
2379 * symfile.c (init_entry_point_info): Use new "initialized" field.
2381 * objfiles.h (struct entry_point) <initialized>: New field.
2382 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
2383 (struct objfile) <ei>: ...here. Remove.
2384 * objfiles.c (entry_point_address_query): Update.
2386 2014-01-15 Tom Tromey <tromey@redhat.com>
2388 * objfiles.c (entry_point_address_query): Relocate entry point
2390 (objfile_relocate1): Do not relocate entry point address.
2391 * objfiles.h (struct entry_info) <entry_point>: Update comment.
2392 <the_bfd_section_index>: New field.
2393 * symfile.c (init_entry_point_info): Find the entry point's
2396 2014-01-15 Tom Tromey <tromey@redhat.com>
2398 * solib-frv.c (enable_break): Use entry_point_address_query.
2400 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2402 * NEWS: Add note on improved process record-replay on
2403 arm*-linux* targets.
2405 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2407 * arm-tdep.c (enum arm_record_result): New enum.
2408 (arm_record_unsupported_insn): New function.
2409 (arm_record_coproc_data_proc): Removed.
2410 (thumb2_record_ld_st_multiple): New function.
2411 (thumb2_record_ld_st_dual_ex_tbb): New function.
2412 (thumb2_record_data_proc_sreg_mimm): New function.
2413 (thumb2_record_ps_dest_generic): New function.
2414 (thumb2_record_branch_misc_cntrl): New function.
2415 (thumb2_record_str_single_data): New function.
2416 (thumb2_record_ld_mem_hints): New function.
2417 (thumb2_record_ld_word): New function.
2418 (thumb2_record_lmul_lmla_div): New function.
2419 (thumb2_record_decode_insn_handler): New function.
2420 (decode_insn): Add thumb32 instruction handlers.
2422 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2424 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
2425 (struct arm_linux_record_tdep): Declare.
2426 (arm_canonicalize_syscall): New function.
2427 (arm_all_but_pc_registers_record): New function.
2428 (arm_linux_syscall_record): New function.
2429 (arm_linux_init_abi): Add syscall recording constructs.
2430 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
2431 decoding. (arm_record_coproc_data_proc): Update arm syscall
2433 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
2434 <arm_syscall_record>: New field.
2435 * configure.tgt (arm*-*-linux*): Add linux-record.o to
2438 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2440 * arm-tdep.c (thumb_record_misc): Update to use sp as base
2441 register for push instruction recording.
2443 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2445 * arm-tdep.c (thumb_record_misc): Update to correct logical
2446 error while recording ldm, ldmia and pop instructions.
2448 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2450 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
2452 2014-01-15 Pedro Alves <palves@redhat.com>
2454 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
2455 (go32_resume, go32_fetch_registers, store_register)
2456 (go32_store_registers, go32_prepare_to_store)
2457 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
2458 (go32_create_inferior, go32_can_run, go32_terminal_init)
2459 (go32_terminal_inferior, go32_terminal_ours): Delete forward
2462 2014-01-15 Tom Tromey <tromey@redhat.com>
2464 * target.h (async_callback_ftype): New typedef.
2465 (struct target_ops) <to_async>: Use it.
2467 2014-01-15 Joel Brobecker <brobecker@adacore.com>
2469 * python/py-value.c (get_field_type): Remove unnecessary curly
2470 braces for single-statement if block.
2472 2014-01-15 Joel Brobecker <brobecker@adacore.com>
2474 * python/py-type.c (convert_field): Add missing empty line
2477 2014-01-14 Doug Evans <dje@google.com>
2479 * symfile.h (expand_symtabs_matching): Renamed from
2480 expand_partial_symbol_names. Update prototype.
2481 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
2482 * symfile.c (expand_symtabs_matching): Renamed from
2483 expand_partial_symbol_names. New args file_matcher, kind.
2484 Rename arg fun to symbol_matcher.
2485 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
2486 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
2487 ada_expand_partial_symbol_name.
2488 (ada_make_symbol_completion_list): Update to call
2489 expand_symtabs_matching.
2490 (ada_add_global_exceptions): Call expand_symtabs_matching.
2491 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
2492 call map_symbol_filenames.
2493 * symtab.c (sources_info): Update to call map_symbol_filenames.
2494 (search_symbols): Call expand_symtabs_matching.
2495 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
2496 (default_make_symbol_completion_list_break_on): Update to call
2497 expand_symtabs_matching.
2498 (make_source_files_completion_list): Update to call
2499 map_symbol_filenames.
2501 2014-01-14 Doug Evans <dje@google.com>
2503 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
2504 (expand_symtabs_symbol_matcher_ftype): New typedef.
2505 (quick_symbol_functions.expand_symtabs_matching): Update to use.
2506 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
2507 * symfile.c (expand_partial_symbol_names): Update to use
2508 expand_symtabs_symbol_matcher_ftype.
2509 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
2510 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
2511 Arg name_matcher renamed to symbol_matcher.
2512 * psymtab.c (recursively_search_psymtabs): Update to use
2513 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
2515 (expand_symtabs_matching_via_partial): Update to use
2516 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
2517 Arg name_matcher renamed to symbol_matcher.
2519 2014-01-14 Doug Evans <dje@google.com>
2521 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
2522 (map_partial_symbol_filenames): Ditto.
2523 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
2524 (map_partial_symbol_filenames): Ditto.
2525 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
2526 (map_partial_symbol_filenames): Ditto.
2527 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
2528 (map_partial_symbol_filenames): Ditto.
2529 * symtab.c: Delete #include "psymtab.h".
2531 2014-01-14 Pedro Alves <palves@redhat.com>
2532 Tom Tromey <tromey@redhat.com>
2534 * infrun.c (use_displaced_stepping): Use find_record_target
2535 instead of RECORD_IS_USED.
2536 (adjust_pc_after_break): Use record_full_is_used instead of
2538 * record-btrace.c (record_btrace_open): Call record_preopen
2539 instead of checking RECORD_IS_USED.
2540 * record-full.c (record_full_shortname)
2541 (record_full_core_shortname): New globals.
2542 (record_full_is_used): New function.
2543 (find_full_open): Call record_preopen instead of checking
2545 (init_record_full_ops): Set the target's shortname to
2546 record_full_shortname.
2547 (init_record_full_core_ops): Set the target's shortname to
2548 record_full_core_shortname.
2549 * record-full.h (record_full_is_used): Declare.
2550 * record.c (find_record_target): Make extern.
2551 (record_preopen): New function.
2552 * record.h (RECORD_IS_USED): Delete macro.
2553 (find_record_target, record_preopen): Declare functions.
2555 2014-01-14 Yao Qi <yao@codesourcery.com>
2557 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
2558 'len''s type to ULONGEST.
2559 (core_xfer_shared_libraries_aix): Likewise.
2560 * gdbarch.c, gdbarch.h: Regenerated.
2561 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
2562 Change type of 'len' to ULONGEST.
2563 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
2564 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
2566 2014-01-14 Yao Qi <yao@codesourcery.com>
2568 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
2569 type of 'len' to ULONGEST.
2570 (linux_xfer_osdata_processgroups): Likewise.
2571 (linux_xfer_osdata_threads): Likewise.
2572 (linux_xfer_osdata_fds): Likewise.
2573 (linux_xfer_osdata_isockets): Likewise.
2574 (linux_xfer_osdata_shm): Likewise.
2575 (linux_xfer_osdata_sem): Likewise.
2576 (linux_xfer_osdata_msg): Likewise.
2577 (linux_common_xfer_osdata): Likewise.
2578 (struct osdata_type) <getter>: Likewise.
2579 * common/linux-osdata.h (linux_common_xfer_osdata): Update
2582 2014-01-14 Yao Qi <yao@codesourcery.com>
2584 * target.h (target_xfer_partial_ftype): Update.
2585 (struct target_ops) <to_xfer_partial>: Change 'len' type to
2587 * aix-thread.c (aix_thread_xfer_partial): Change type of
2588 argument 'len' to ULONGEST.
2589 * auxv.c (procfs_xfer_auxv): Likewise.
2590 (ld_so_xfer_auxv): Likewise.
2591 (memory_xfer_auxv): Likewise.
2592 * bfd-target.c (target_bfd_xfer_partial): Likewise.
2593 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
2594 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
2595 * corelow.c (core_xfer_partial): Likewise.
2596 * ctf.c (ctf_xfer_partial): Likewise.
2597 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
2599 (darwin_read_dyld_info): Likewise.
2600 (darwin_xfer_partial): Likewise.
2601 * exec.c (section_table_xfer_memory_partial): Likewise.
2602 (exec_xfer_partial): Likewise.
2603 * exec.h (section_table_xfer_memory_partial): Update
2605 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
2606 instead of plongest.
2607 (gnu_xfer_partial): Likewise.
2608 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
2609 (ia64_hpux_xfer_solib_got): Likewise.
2610 (ia64_hpux_xfer_partial): Likewise.
2611 * ia64-linux-nat.c (ia64_linux_xfer_partial):
2612 * inf-ptrace.c (inf_ptrace_xfer_partial):
2613 * inf-ttrace.c (inf_ttrace_xfer_partial):
2614 * linux-nat.c (linux_xfer_siginfo): Likewise.
2615 (linux_nat_xfer_partial): Likewise.
2616 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
2617 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
2618 * monitor.c (monitor_xfer_memory): Likewise.
2619 (monitor_xfer_partial): Likewise.
2620 * procfs.c (procfs_xfer_partial): Likewise.
2621 * record-full.c (record_full_xfer_partial): Likewise.
2622 (record_full_core_xfer_partial): Likewise.
2623 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
2624 instead of plongest.
2625 (gdbsim_xfer_partial): Likewise.
2626 * remote.c (remote_xfer_partial): Likewise.
2627 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
2628 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
2630 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
2631 (rs6000_xfer_shared_libraries): Likewise.
2632 * sol-thread.c (sol_thread_xfer_partial): Likewise.
2633 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
2634 (sparc_xfer_partial): Likewise.
2635 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
2636 (spu_xfer_partial): Likewise.
2637 * spu-multiarch.c (spu_xfer_partial): Likewise.
2638 * target.c (target_read_live_memory): Likewise.
2639 (memory_xfer_live_readonly_partial): Likewise.
2640 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
2641 (target_xfer_partial, default_xfer_partial): Likewise.
2642 (current_xfer_partial): Likewise.
2643 * tracepoint.c (tfile_xfer_partial): Likewise.
2644 * windows-nat.c (windows_xfer_memory): Likewise. Call
2645 pulongest instead of plongest.
2646 (windows_xfer_partial): Likewise.
2647 (windows_xfer_shared_libraries): Likewise.
2649 2014-01-14 Yao Qi <yao@codesourcery.com>
2651 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
2652 target_xfer_partial_ftype.
2654 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
2658 * valops.c (value_struct_elt_bitpos): New function
2659 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
2660 object to 'None' if the field name is an empty string ("").
2661 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
2662 attribute to look for a field when 'name' is 'None'.
2663 (get_field_type): New function
2665 2014-01-13 Doug Evans <dje@google.com>
2668 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
2669 (try_open_dwop_file): Ditto.
2670 * gdb_bfd.c: #include "vec.h".
2671 (bfdp): New typedef.
2672 (struct gdb_bfd_data): New member included_bfds.
2673 (gdb_bfd_unref): Unref all included bfds.
2674 (gdb_bfd_record_inclusion): New function.
2675 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
2677 2014-01-13 Tom Tromey <tromey@redhat.com>
2679 * gdbcore.h (deprecated_core_resize_section_table): Remove.
2681 2014-01-13 Tom Tromey <tromey@redhat.com>
2683 * defs.h (use_windows): Remove.
2684 * gdb.c (main): Update.
2685 * main.c (captured_main, gdb_main): Update.
2686 * main.h (struct captured_main_args) <use_windows>: Remove.
2687 * top.c (use_windows): Remove.
2689 2014-01-13 Tom Tromey <tromey@redhat.com>
2691 * defs.h (deprecated_flush_hook): Remove.
2693 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2696 * linux-thread-db.c (try_thread_db_load): Add parameter
2697 check_auto_load_safe. Move here the file_is_auto_load_safe call.
2698 (try_thread_db_load_from_pdir_1): Move it there from here.
2699 (try_thread_db_load_from_sdir): Update caller.
2700 (try_thread_db_load_from_dir): Move it there from here.
2702 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
2704 * regformats/regdat.sh: Always rewrite the register file.
2706 2014-01-13 Pedro Alves <palves@redhat.com>
2708 * Makefile.in (CHECK_HEADERS): New variable.
2709 (check-headers:): New rule.
2711 2014-01-13 Tom Tromey <tromey@redhat.com>
2713 * cli/cli-setshow.c (do_set_command): Update.
2714 * defs.h (deprecated_set_hook): Remove.
2715 * top.c (deprecated_set_hook): Remove.
2717 2014-01-13 Pedro Alves <palves@redhat.com>
2719 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
2720 the tracepoint if the PC is a pseudo-register.
2722 2014-01-13 Tom Tromey <tromey@redhat.com>
2724 * defs.h (XCALLOC): Remove.
2725 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
2726 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
2727 * dwarf2loc.c (allocate_piece_closure): Likewise.
2728 * elfread.c (elf_symfile_segments): Likewise.
2729 (elf_symfile_segments): Likewise.
2730 * gdbtypes.c (copy_type_recursive): Likewise.
2731 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
2732 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
2733 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
2735 * mt-tdep.c (mt_gdbarch_init): Likewise.
2736 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
2738 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
2739 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
2740 * registry.c (registry_alloc_data): Likewise.
2741 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
2742 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
2743 * serial.c (serial_fdopen_ops): Likewise.
2744 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
2746 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
2747 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
2750 2014-01-13 Tom Tromey <tromey@redhat.com>
2752 * defs.h (XMALLOC): Remove.
2753 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
2754 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
2755 * cli-out.c (struct ui_out *): Likewise.
2756 * cli/cli-dump.c (add_dump_command): Likewise.
2757 (add_dump_command): Likewise.
2758 * complaints.c (get_complaints): Likewise.
2759 (find_complaint): Likewise.
2760 * dwarf2-frame.c (execute_cfa_program): Likewise.
2761 * dwarf2read.c (abbrev_table_read_table): Likewise.
2762 * gdbarch.sh: Likewise.
2763 * gdbarch.c: Rebuild.
2764 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
2765 * interps.c (interp_new): Likewise.
2766 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
2767 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2768 * mi/mi-console.c (mi_console_file_new): Likewise.
2769 * mi/mi-interp.c (mi_interpreter_init): Likewise.
2770 * mi/mi-out.c (mi_out_new): Likewise.
2771 * mi/mi-parse.c (mi_parse): Likewise.
2772 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
2773 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
2774 * observer.c (xalloc_observer_list_node): Likewise.
2775 * regcache.c (regcache_xmalloc_1): Likewise.
2776 * reggroups.c (reggroup_new): Likewise.
2777 (_initialize_reggroup): Likewise.
2778 * registry.c (register_data_with_cleanup): Likewise.
2779 * remote.c (remote_notif_stop_alloc_reply): Likewise.
2780 * ser-base.c (serial_ttystate): Likewise.
2781 * ser-mingw.c (make_pipe_state): Likewise.
2782 * ser-pipe.c (pipe_open): Likewise.
2783 * serial.c (serial_open): Likewise.
2784 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2785 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
2786 (tui_alloc_win_info): Likewise.
2787 (tui_add_content_elements): Likewise.
2788 * tui/tui-file.c (tui_file_new): Likewise.
2789 * tui/tui-out.c (tui_out_new): Likewise.
2790 * ui-file.c (mem_file_new): Likewise.
2791 * ui-out.c (push_level): Likewise.
2792 (make_cleanup_ui_out_end): Likewise.
2793 (append_header_to_list): Likewise.
2794 (ui_out_new): Likewise.
2795 * user-regs.c (user_reg_add_builtin): Likewise.
2797 2014-01-13 Tom Tromey <tromey@redhat.com>
2799 * defs.h (XZALLOC): Remove.
2800 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
2801 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
2802 (get_ada_tasks_inferior_data): Likewise.
2803 * auto-load.c (get_auto_load_pspace_data): Likewise.
2804 * auxv.c (get_auxv_inferior_data): Likewise.
2805 * bfd-target.c (target_bfd_reopen): Likewise.
2806 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
2807 (deprecated_insert_raw_breakpoint): Likewise.
2808 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
2809 * corelow.c (core_open): Likewise.
2810 * darwin-nat.c (darwin_check_new_threads): Likewise.
2811 (darwin_attach_pid): Likewise.
2812 * dummy-frame.c (dummy_frame_push): Likewise.
2813 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
2814 * dwarf2loc.c (allocate_piece_closure): Likewise.
2815 * elfread.c (elf_symfile_segments): Likewise.
2816 * eval.c (ptrmath_type_p): Likewise.
2817 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
2818 * gdbtypes.c (alloc_type_arch): Likewise.
2819 (alloc_type_instance): Likewise.
2820 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
2821 * inf-child.c (inf_child_can_use_agent): Likewise.
2822 * inflow.c (get_inflow_inferior_data): Likewise.
2823 * infrun.c (save_infcall_suspend_state): Likewise.
2824 * jit.c (jit_reader_load): Likewise.
2825 (get_jit_objfile_data): Likewise.
2826 (get_jit_program_space_data): Likewise.
2827 (jit_object_open_impl): Likewise.
2828 (jit_symtab_open_impl): Likewise.
2829 (jit_block_open_impl): Likewise.
2830 (jit_frame_sniffer): Likewise.
2831 * linux-fork.c (add_fork): Likewise.
2832 * maint.c (make_command_stats_cleanup): Likewise.
2833 * objfiles.c (get_objfile_pspace_data): Likewise.
2834 * opencl-lang.c (struct lval_closure): Likewise.
2835 * osdata.c (osdata_start_osdata): Likewise.
2836 * progspace.c (new_address_space): Likewise.
2837 (add_program_space): Likewise.
2838 * remote-sim.c (get_sim_inferior_data): Likewise.
2839 * sh-tdep.c (sh_gdbarch_init): Likewise.
2840 * skip.c (Ignore): Likewise.
2841 (skip_delete_command): Likewise.
2842 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
2843 (library_list_start_library): Likewise.
2844 (solib_aix_current_sos): Likewise.
2845 * solib-darwin.c (get_darwin_info): Likewise.
2846 (darwin_current_sos): Likewise.
2847 * solib-dsbt.c (get_dsbt_info): Likewise.
2848 * solib-ia64-hpux.c (new_so_list): Likewise.
2849 (ia64_hpux_get_solib_linkage_addr): Likewise.
2850 * solib-spu.c (append_ocl_sos): Likewise.
2851 (spu_current_sos): Likewise.
2852 * solib-svr4.c (get_svr4_info): Likewise.
2853 (svr4_keep_data_in_core): Likewise.
2854 (library_list_start_library): Likewise.
2855 (svr4_default_sos): Likewise.
2856 (svr4_read_so_list): Likewise.
2857 * solib-target.c (library_list_start_library): Likewise.
2858 (solib_target_current_sos): Likewise.
2859 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
2860 * symfile-debug.c (install_symfile_debug_logging): Likewise.
2861 * symfile.c (default_symfile_segments): Likewise.
2862 * target-descriptions.c (tdesc_data_init): Likewise.
2863 (tdesc_create_reg): Likewise.
2864 (struct tdesc_type *): Likewise.
2865 (tdesc_create_vector): Likewise.
2866 (tdesc_set_struct_size): Likewise.
2867 (struct tdesc_type *): Likewise.
2868 (tdesc_free_feature): Likewise.
2869 (tdesc_create_feature): Likewise.
2870 * windows-nat.c (windows_add_thread): Likewise.
2871 (windows_make_so): Likewise.
2872 * xml-support.c (gdb_xml_body_text): Likewise.
2873 (gdb_xml_create_parser_and_cleanup): Likewise.
2874 (xml_process_xincludes): Likewise.
2875 * xml-syscall.c (allocate_syscalls_info): Likewise.
2876 (syscall_create_syscall_desc): Likewise.
2878 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
2880 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
2881 function, with code from i386_stap_parse_special_token.
2882 (i386_stap_parse_special_token_three_arg_disp): Likewise.
2883 (i386_stap_parse_special_token): Move code to the two functions
2886 2014-01-09 Pedro Alves <palves@redhat.com>
2887 Hui Zhu <hui@codesourcery.com>
2890 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2891 bp_err_string. Don't mark the location shlib_disabled if the
2892 error thrown wasn't a generic or memory error. Catch errors
2893 thrown while inserting breakpoints in overlayed code. Output
2894 error message of software breakpoints.
2895 * remote.c (remote_insert_breakpoint): If this breakpoint has
2896 target-side commands but this stub doesn't support Z0 packets,
2897 throw NOT_SUPPORTED_ERROR error.
2898 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2899 * target.h (target_insert_breakpoint): Extend comment.
2900 (target_insert_hw_breakpoint): Add comment.
2902 2014-01-08 Pedro Alves <palves@redhat.com>
2904 * remote.c (remote_add_thread): Add threads silently if starting
2906 (remote_notice_new_inferior): If in all-stop, and starting up,
2907 don't call notice_new_inferior.
2908 (get_current_thread): New function, factored out from ...
2909 (add_current_inferior_and_thread): ... this. Adjust.
2910 (remote_start_remote) <all-stop>: Fetch the thread list. If we
2911 found any thread, then select the remote's current thread as GDB's
2914 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2916 * NEWS: Create a new section for the next release branch.
2917 Rename the section of the current branch, now that it has
2920 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2922 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2923 * version.in: Bump version to 7.7.50.DATE-cvs.
2925 2014-01-08 Yao Qi <yao@codesourcery.com>
2927 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2928 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2929 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2931 2014-01-08 Yao Qi <yao@codesourcery.com>
2933 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2934 return value of bfd_get_filename to symbol_file_add_from_bfd.
2936 2014-01-08 Pierre Muller <muller@sourceware.org>
2939 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2940 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2941 to prim_record_mininal_symbol_and_info.
2942 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2943 in call to prim_record_minimal_symbol_and_info.
2944 (read_pe_exported_syms): Set index field of section_data.
2946 2014-01-07 Andrew Pinski <apinski@cavium.com>
2948 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2949 * features/aarch64.c: Regenerate.
2951 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2953 * target.c (return_null): Define.
2954 (update_current_target): Use it instead of return_zero for
2955 functions that return a pointer.
2957 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2959 * source.c (add_path): Fix check for duplicated paths in the previously
2962 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2964 * ada-lang.c: Remove duplicated include statements.
2965 * alphabsd-nat.c: Ditto.
2966 * amd64-darwin-tdep.c: Ditto.
2967 * amd64fbsd-nat.c: Ditto.
2968 * auto-load.c: Ditto.
2970 * breakpoint.c: Ditto.
2972 * fork-child.c: Ditto.
2973 * gdb_usleep.c: Ditto.
2974 * i386-darwin-tdep.c: Ditto.
2975 * i386fbsd-nat.c: Ditto.
2977 * inferior.c: Ditto.
2979 * linux-nat.c: Ditto.
2980 * linux-tdep.c: Ditto.
2981 * m68kbsd-nat.c: Ditto.
2982 * m68klinux-nat.c: Ditto.
2983 * microblaze-tdep.c: Ditto.
2984 * mips-linux-tdep.c: Ditto.
2985 * mn10300-tdep.c: Ditto.
2986 * nto-tdep.c: Ditto.
2987 * opencl-lang.c: Ditto.
2989 * printcmd.c: Ditto.
2990 * regcache.c: Ditto.
2991 * remote-m32r-sdi.c: Ditto.
2995 * tilegx-linux-nat.c: Ditto.
2996 * tilegx-tdep.c: Ditto.
2997 * tracepoint.c: Ditto.
2999 * vaxbsd-nat.c: Ditto.
3000 * windows-nat.c: Ditto.
3001 * xtensa-tdep.c: Ditto.
3003 2014-01-07 Yao Qi <yao@codesourcery.com>
3005 * spu-linux-nat.c (_initialize_spu_nat): Declare.
3007 2014-01-07 Yao Qi <yao@codesourcery.com>
3008 Joel Brobecker <brobecker@adacore.com>
3010 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
3011 (pdc_write_regs): Likewise.
3012 (fetch_regs_kernel_thread): Likewise.
3013 (store_regs_kernel_thread): Likewise.
3015 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3017 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
3018 tagged type objects to their actual type.
3020 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3022 * ada-valprint.c (print_field_values): Add "language" parameter.
3023 Update calls to print_field_values and print_variant_part.
3024 Pass new parameter "language" in call to val_print instead
3025 of "current_language". Replace call to ada_val_print by call
3027 (print_variant_part): Add "language" parameter.
3028 (ada_val_print_struct_union): Update call to print_field_values.
3030 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3032 * ada-valprint.c (ui_memcpy): Delete.
3033 (ada_print_floating): Update documentation. Add empty line
3034 between between function documentation and implementation.
3035 Delete variable "buffer". Use ui_file_xstrdup in place of
3036 ui_file_put. Minor adjustments following this change.
3038 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3040 * ada-valprint.c (ada_val_print_string): New function,
3041 extracted from ada_val_print_array.
3042 (ada_val_print_array): Replace extracted code by call
3043 to ada_val_print_string followed by a return. Move
3044 "else" branch to the function's top block.
3046 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3048 * ada-valprint.c (ada_val_print_array): Move implementation
3049 down. Rename parameter "offset" and "val" into "offset_aligned"
3050 and "original_value" respectively. Add parameter "offset".
3052 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3054 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
3055 re-organizing the code. Change the "???" message printed
3056 when target type is a TYPE_CODE_UNDEF into
3057 "<ref to undefined type>".
3059 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3061 * ada-valprint.c (print_record): Delete, implementation inlined...
3062 (ada_val_print_struct_union): ... here. Remove call to
3063 ada_check_typedef in inlined implementation.
3065 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3067 * ada-valprint.c (ada_val_print_gnat_array): New function,
3068 extracted from ada_val_print_1;
3069 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
3070 (ada_val_print_flt, ada_val_print_struct_union)
3071 (ada_val_print_ref): Likewise.
3072 (ada_val_print_1): Delete variables i and elttype.
3073 Replace extracted-out code by call to corresponding
3076 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3078 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
3080 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3082 * ada-valprint.c (ada_val_print_1): Replace calls to
3083 ada_val_print_1 by calls to val_print.
3085 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3087 * ada-valprint.c (ada_val_print_1): Add parameter "language".
3088 Update calls to self accordingly. Replace calls to c_val_print
3089 by calls to val_print.
3091 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3093 * ada-valprint.c (print_record): Delete declaration.
3094 (adjust_type_signedness, ada_val_print_1): Likewise.
3095 (ada_val_print): Move function implementation down.
3096 (print_variant_part, print_field_values, print_record):
3097 Move function implementation up.
3099 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3101 * python/py-type.c (typy_get_name): New function.
3102 (type_object_getset): Add entry for attribute "name".
3103 * NEWS: Add entry mentioning this new attribute.
3105 2014-01-07 Yao Qi <yao@codesourcery.com>
3107 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
3110 2014-01-07 Yao Qi <yao@codesourcery.com>
3112 * gnu-nat.c (info_port_rights): Add qualifier const to
3115 2014-01-07 Yao Qi <yao@codesourcery.com>
3117 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
3119 2014-01-07 Yao Qi <yao@codesourcery.com>
3121 * gnu-nat.c (make_inf) Update declaration.
3122 (make_inf): Make it static.
3123 (inf_set_traced): Likewise.
3124 (inf_port_to_thread, inf_task_died_status): Likewise.
3126 2014-01-07 Yao Qi <yao@codesourcery.com>
3128 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
3130 2014-01-07 Yao Qi <yao@codesourcery.com>
3132 * gnu-nat.c (_initialize_gnu_nat): Declare.
3134 2014-01-07 Yao Qi <yao@codesourcery.com>
3136 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
3138 (struct gdbarch_info) <byte_order>: Change type to
3140 <byte_order_for_code>: Likewise.
3141 * gdbarch.c, gdbarch.h: Regenerated.
3143 2014-01-06 Sasha Smundak <asmundak@google.com>
3145 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
3147 2014-01-06 Tom Tromey <tromey@redhat.com>
3149 * doublest.c (convert_doublest_to_floatformat): Use const, not
3151 * somread.c (som_symtab_read): Likewise.
3153 2014-01-07 Hui Zhu <hui@codesourcery.com>
3155 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
3156 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
3157 (gdb_bfd_fopen): Ditto.
3158 (gdb_bfd_openr): Ditto.
3159 (gdb_bfd_openw): Ditto.
3160 (gdb_bfd_openr_iovec): Ditto.
3161 (gdb_bfd_fdopenr): Ditto.
3162 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
3163 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
3165 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
3167 * symfile-mem.c (symbol_file_add_from_memory): Removed
3168 gdb_bfd_stash_filename.
3170 2014-01-03 Doug Evans <dje@google.com>
3172 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
3175 2014-01-01 Joel Brobecker <brobecker@adacore.com>
3177 Update year range in copyright notice of all files.
3179 2014-01-01 Joel Brobecker <brobecker@adacore.com>
3181 * top.c (print_gdb_version): Set copyright year to 2014.
3183 2014-01-01 Joel Brobecker <brobecker@adacore.com>
3185 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
3187 For older changes see ChangeLog-2013.
3193 version-control: never