gdb/ChangeLog

   1 Wed May 20 10:12:11 1998  John Metzler  <jmetzler@cygnus.com>
   2
   3         * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
   4         Split out as separate function called by skip prologue and scan
   5         prologue. new formula handles optimization in which the prologue
   6         is interleaved with the body of the function. Also recognizes new
   7         variations of prologue encoding.  Use of frame pointer is
   8         essential to debugging, -fno-omit-frame-pointer
   9         (m32r_skip_prologue): Call decode prologue, ignore line info
  10         (m32r_scan_prologue): Call decode prologue, ignore line info.
  11
  12
  13 Tue May 19 17:23:54 1998  John Metzler  <jmetzler@cygnus.com>
  14
  15         * w89k-rom.c (_initialize_w89k ): Call new init function
  16                      (init_w89k_cmds): Convert to dynamic initialization of
  17                       monitor_ops data structure for forward compatability with
  18                       additions to the data structure.
  19         * dbug-rom.c (_initialize_dbug_rom): ditto
  20                      (init_dbug_cmds):       ditto
  21         * m32r-rom.c (_initialize_m32r_rom):  ditto
  22                      (init_m32r_cmds):        ditto
  23
  24 Mon May 18 13:34:27 1998  Keith Seitz  <keiths@cygnus.com>
  25
  26         * dbxread.c (process_one_symbol): If block addresses are relative to
  27         function start addresses, reset function_start_address whenever a new
  28         source file is seen.
  29
  30 start-sanitize-d30v
  31 Sat May 16 22:21:48 1998  Frank Ch. Eigler  <fche@cygnus.com>
  32
  33         * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
  34         frame struct before extracting saved register offsets.
  35
  36 end-sanitize-d30v
  37 Thu May 14 5:51:00 1998  Ron Unrau  <runrau@cygnus.com>
  38
  39         * symtab.c (decode_line_1): set section for "break *<addr>"
  40
  41 Wed May 13 20:58:02 1998  Mark Alexander  <marka@cygnus.com>
  42
  43         * corefile.c (reopen_exec_file): Reopen the exec file if
  44         it has changed.
  45
  46 Wed May 13 15:22:02 1998  Mark Alexander  <marka@cygnus.com>
  47
  48         * sparc-tdep.c (fetch_instruction): New function.
  49         (single_step, sparc_init_extra_frame_info, examine_prologue):
  50         Use fetch_instruction instead of read_memory_integer
  51         to ensure that instructions are always read as big-endian.
  52
  53 Wed May 13 14:42:21 1998  Ian Lance Taylor  <ian@cygnus.com>
  54
  55         * configure.in: Add AC_FUNC_ALLOCA.
  56         * defs.h: Check HAVE_ALLOCA_H rather than sparc.  Add _AIX pragma
  57         alloca.
  58         * configure: Rebuild.
  59 start-sanitize-java
  60         * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
  61         targets.
  62 end-sanitize-java
  63
  64 Tue May 12 13:17:35 1998  Frank Ch. Eigler  <fche@cygnus.com>
  65
  66         * stabsread.c (read_one_struct_field): Check for typedef in type
  67         tree before clearing bitfield information.
  68
  69 Thu May  7 14:49:38 1998  Bob Manson  <manson@charmed.cygnus.com>
  70
  71         * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
  72         %o0-%o5 as 64-bit values; compensate for stack bias.
  73         (USE_STRUCT_CONVENTION): We only pass pointers to structs
  74         if they're larger than 32 bytes.
  75         (REG_STRUCT_HAS_ADDR): Ditto.
  76
  77         * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
  78         instead of read_register. If the target is a sparc64 and the frame
  79         pointer is odd, compensate for the stack bias.
  80         (get_saved_register): Use read_sp().
  81         (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
  82         (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
  83         save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
  84         (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
  85         CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
  86         dummy frame.
  87         (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
  88         the FP is odd, compensate for stack bias.
  89         (sparc_store_return_value): Right-justify the return value before
  90         writing it to %o0.
  91         (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
  92         sparc64.
  93         (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
  94         sparc64_write_fp, sp64_push_arguments,
  95         sparc64_extract_return_value): New functions to support the
  96         sparc64 ABI.
  97
  98         * dwarfread.c (handle_producer): Set processing_gcc_compilation to
  99         the right version number.
 100
 101         * dwarf2read.c (read_file_scope): Assume we're processing
 102         GCC2 output.
 103
 104 Wed May  6 16:34:03 1998  Jeffrey A Law  (law@cygnus.com)
 105
 106         * somsolib.c: Include gdb_stat.h.
 107
 108 Mon May  4 16:24:22 1998  Mark Alexander  <marka@cygnus.com>
 109
 110         * defs.h (make_run_cleanup): Declare.
 111         * solib.c (find_solib): Pass correct number of arguments to
 112         make_run_cleanup.
 113
 114 Sat May  2 09:35:07 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
 115
 116         * ocd.h:  Add new flags, function codes, and processor types to support
 117         new Wiggler capabilities.
 118         * (ocd_write_bytes_size):  New function to allow atomic writes of
 119         memory in sizes larger than a byte.
 120
 121         * ser-unix.c (baudtab):  Add 57600, 115200, 230400, and 460800 baud.
 122
 123 Fri May  1 19:51:32 1998  Frank Ch. Eigler  <fche@cygnus.com>
 124
 125         * stabsread.c (read_one_struct_field): Do not override supplied
 126         bitfield size for a range type value.
 127
 128         * gdbtypes.c (create_range_type): For a range with positive
 129         lower limit, declare range type as unsigned.
 130
 131 Fri May  1 10:58:34 1998  John Metzler  <jmetzler@cygnus.com>
 132
 133         * monitor.c: Turn off debug
 134
 135 Fri May  1 09:29:56 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
 136
 137         * breakpoint.c (delete_command):  Skip internal breakpoints when
 138         all breakpoints are requested.
 139
 140         * stabsread.c (define_symbol):  Record parameter types from Sunpro
 141         function stabs in the TYPE_FIELDS of the function type.
 142
 143 Thu Apr 30 15:59:54 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 144
 145         * Makefile.in (config-check-targets, config-check-hosts): Removed.
 146
 147 1998-04-30  Paul Eggert  <eggert@twinsun.com>
 148
 149         * Makefile.in (maintainer-clean):
 150         Don't get ahead of yourself and delete Makefile
 151         before running `make'.
 152         (local-maintainer-clean, do-maintainer-clean): New rules.
 153
 154 Wed Apr 29 10:20:40 1998  John Metzler  <jmetzler@cygnus.com>
 155
 156         * nec4102rom.c: New file implements ROM monitor adapter for
 157         nec-vr4102 board.  This board hosts the vr4111 chip.  This file
 158         required extensions to the monitor_ops structure, hooks for wait
 159         filter, new flags. This version does not support more than one
 160         breakpoint and resuming after a breakpoint in 16 bit mode is
 161         completely disfunctional.
 162
 163         * monitor.h: Defined additional hooks for dmpregs, configure_hooks
 164         and wait_filter. These additions require that all ROM monitor
 165         interfaces be recoded to initialize monitor ops using assignments
 166         rather than static structure initialization.  Added new bits to
 167         flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
 168
 169         * monitor.c (RDEBUG): Conditional tracing throughout the file.
 170         (fromhex): Now recognized upper cse hex digits
 171         (monitor_printf_noecho):
 172         (monitor_readchar): Tracing interferes with input timing.
 173         (monitor_open): Register different memory write functions with
 174         dcache_init if MO_HAS_BLOCKWRITES.
 175         (flush_monior_dcache): Added as an additional utilty.
 176         (monitor-resume): Call continue hook if one has been supplied.
 177         (monitor_wait_filter): New function Factored out of monitor wait
 178         and used if alternate wait-filter has not been provided.
 179         (monitor_wait): call alternate wait filter if provided.  Call
 180         monitor_dump_regs, a new function factored out from inline code.
 181         (monitor_dump_block): A new function used as a utility when
 182         monitors must dump several blocks of registers using different
 183         commands.
 184         (monitor_dump_regs): Call alternate function if provided. Uses new
 185         hook in monitor.h.
 186         (monitor_write_memory): Engage previouly added hook
 187         MO_FILL_USES_ADDR.
 188         (monitor_write_even_block): new function supports writing long
 189         blocks of 4byte words.
 190         (longlongendswap): new internal function
 191         (monitor_write_memory_longlongs): new function writes large blocks
 192         using command to enter a long long.
 193         (monitor_write-memory_block): new Function figures out which block
 194         mod to use.
 195         (monitor_read_memory): Can now handle dump formats in which the bytes
 196         preceeding the requested data is not printed.
 197
 198 Tue Apr 28 19:41:33 1998  Tom Tromey  <tromey@cygnus.com>
 199
 200         * Makefile.in (GDBTKLIBS): New macro.
 201         (INSTALLED_LIBS): Include GDBTKLIBS.
 202         (CLIBS): Likewise.
 203         * configure: Rebuilt.
 204         * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
 205         (GDBTKLIBS): AC_SUBST.
 206
 207         * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
 208         `memrange'.
 209
 210         * tracepoint.c (memrange_cmp): Fixed typo in function intro.
 211
 212 Tue Apr 28 17:41:20 1998  Philippe De Muyter  <phdm@macqel.be>
 213
 214         * symfile.c (overlay_auto_command): Add forgotten parameter definitions.
 215         (overlay_manual_command, overlay_off_command): Likewise.
 216         (overlay_load_command): Likewise.
 217         * tracepoint.c (memrange_cmp): Parameters have type void *, not
 218         struct memrange *.
 219
 220 Tue Apr 28 11:08:25 1998  John Metzler  <jmetzler@cygnus.com>
 221
 222         * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
 223
 224 Mon Apr 27 14:32:21 1998  Mark Alexander  <marka@cygnus.com>
 225
 226         * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
 227         make it work on the simulator.
 228         (FIX_CALL_DUMMY): Convert to function call instead of inline code.
 229         (sparc_fix_call_dummy): Declare.
 230         * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
 231         old FIX_CALL_DUMMY macro, with additional fixes for simulator.
 232         (sparc_push_dummy_frame): Set registers differently on simulator
 233         to prevent corrupted register window save areas.
 234
 235 Mon Apr 27 13:46:40 1998  John Metzler  <jmetzler@cygnus.com>
 236
 237         * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
 238         Convert all static initializations of monitor ops structures to
 239         executable initializations in order that additions to the data
 240         structure definition can me made without repeating this editing
 241         exercise.
 242         * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
 243         * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
 244         * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
 245         * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
 246         * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
 247         * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
 248         * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
 249         * remote-est.c (_initialize_est, init_est_cmds): Ditto.
 250         * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
 251
 252 Mon Apr 27 10:43:04 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 253
 254         * gdb_string.h (strdup): Don't specify arguments in prototype.
 255
 256 Sun Apr 26 07:57:21 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
 257
 258         * rs6000-nat.c (vmap_ldinfo):  Issue warning instead of error if
 259         fstat on ldinfo_fd fails.  Use objfile->obfd instead of vp->bfd
 260         to check for reference to the same file.
 261
 262         * target.c (target_read_string):  Handle string transfers at the
 263         end of a memory section gracefully.
 264
 265 Fri Apr 24 17:18:56 1998  Geoffrey Noer  <noer@cygnus.com>
 266
 267         * Makefile.in: enable EXEEXT setting
 268
 269 start-sanitize-r5900
 270 Fri Apr 24 11:25:07 1998  Jeffrey A Law  (law@cygnus.com)
 271
 272         * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
 273         GPR loads/stores generated on the r5900.
 274         (mips_find_saved_regs, mips32_skip_prologue): Likewise.
 275         * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
 276         * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
 277
 278 end-sanitize-r5900
 279 Thu Apr 23 16:37:20 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 280
 281         * README:  Minor changes for 4.17 release.
 282
 283 start-sanitize-java
 284 Thu Apr 23 15:44:39 1998  Per Bothner  <bothner@cygnus.com>
 285
 286         * symfile.c (deduce_language_from_filename):  .class implies java.
 287
 288 end-sanitize-java
 289 Thu Apr 23 12:52:21 1998  Philippe De Muyter  <phdm@macqel.be>
 290
 291         * configure.in (strerror): Check if function must be declared.
 292         * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
 293         * gdb_string.h (strerror): Function declaration issued if
 294         NEED_DECLARATION_STRERROR.
 295         * configure, config.in : Files regenerated.
 296
 297 Thu Apr 23 12:27:43 1998  Philippe De Muyter  <phdm@macqel.be>
 298
 299         * symfile.c (simple_overlay_update_1): Do not prefix array address
 300         by `&'.
 301         * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
 302         * tracepoint.c (encode_actions): Ditto.
 303         * language.c, complaints.c, utils.c (varargs.h): Do not include that
 304         file here, it is already included indirectly by defs.h.
 305         * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
 306         value to the appropriate pointer type.
 307         * utils.c (floatformat_from_doublest): Ditto.
 308         * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
 309         (add_memrange): Likewise with xrealloc return value.
 310         * stabsread.c (ref_add): Ditto.
 311         * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
 312         * elfread.c (elf_symfile_read): Ditto.
 313         * os9kread.c (os9k_symfile_init): Ditto.
 314
 315 Thu Apr 23 00:32:08 1998  Tom Tromey  <tromey@cygnus.com>
 316
 317         * config.in: Rebuilt.
 318         * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
 319         HAVE_LC_MESSAGES): Define.
 320
 321 Wed Apr 22 21:17:35 1998  Christopher Faylor <cgf@cygnus.com>
 322
 323         * gdbtk.c (_initialize_gdbtk): add cygwin32 specific code to
 324         allow `gdb -nw' to work when specified specified from a windows
 325         console-mode command line.
 326
 327 Wed Apr 22 15:38:56 1998  Tom Tromey  <tromey@cygnus.com>
 328
 329         * configure: Rebuilt.
 330         * configure.in: Call CY_GNU_GETTEXT.
 331         * Makefile.in (top_builddir): New macro.
 332         (INTL): Define to @INTLLIBS@.
 333         (INTL_DEPS): New macro.
 334         (CDEPS): Reference INTL_DEPS, not INTL.
 335
 336 start-sanitize-sky
 337 Wed Apr 22 13:40:16 1998  Doug Evans  <devans@canuck.cygnus.com>
 338
 339         * txvu-tdep.c (txvu_print_insn): Fix thinko.
 340
 341 end-sanitize-sky
 342 Wed Apr 22 12:58:23 1998 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 343
 344         Handle missing shared libraries during the examination of a core
 345         dump gracefully.
 346         * solib.c (find_solib):  Use catch_errors around call to
 347         solib_map_sections. Use warning instead of error if reading of
 348         the shared library name fails.
 349         (solib_map_sections):  Change return and argument types to make
 350         it callable from catch_errors.
 351         (symbol_add_stub):  Avoid GDB core dump if solib->abfd is NULL.
 352         * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
 353         symbol_add_stub):  Ditto.
 354
 355 Wed Apr 22 14:34:49 1998  Michael Meissner  <meissner@cygnus.com>
 356
 357         * Makefile.in (INTL*): Add support to link in the intl library,
 358         and to add -I options to its source and object directories.
 359         (INTERNAL_CFLAGS): Ditto.
 360         (C{LIBS,DEPS}): Ditto.
 361
 362 start-sanitize-sky
 363 Wed Tue 21 17:29:48 1998  Jim Lemke  <jlemke@cygnus.com>
 364         * configure.in: Add configure option --with-sim-funit.
 365
 366 end-sanitize-sky
 367 Tue Apr 21 11:20:54 1998  Frank Ch. Eigler  <fche@cygnus.com>
 368
 369         * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
 370         with subtarget-specific `mach', rather than fixed default.
 371         * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
 372         disassembly `mach'.
 373 start-sanitize-r5900
 374         * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override.
 375 end-sanitize-r5900
 376 start-sanitize-sky
 377         * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override.
 378 end-sanitize-sky
 379
 380 Mon Apr 20 15:35:03 1998  Philippe De Muyter  <phdm@macqel.be>
 381
 382         * coffread.c (decode_base_type): Treat a long field with size greater
 383         than TARGET_LONG_BIT as long long.
 384         * values.c (value_from_longest): Print code value in error message.
 385
 386 Mon Apr 20 15:32:21 1998   Mark Kettenis  <kettenis@phys.uva.nl>
 387
 388         * gdb/gdb_string.h (strdup): Declare only if not defined as a
 389         macro.
 390
 391 Mon Apr 20 14:18:45 1998  J. Kean Johnston  <jkj@sco.com>
 392
 393         * procfs.c: Added replacement macros for LWP stuff.  Fixed support
 394         for UnixWare / SVR4.2MP targets and any targets which use
 395         multi-file /proc entries.  Fixed support for hardware watchpoints.
 396         * solib.c: SCO needs some of the same code as SunOS. Change
 397         preprocessor conditionals.
 398
 399         * config/i386/i386sco5.mt: New file.
 400         * config/i386/tm-i386sco5.h: New file.
 401         * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
 402         * config/i386/nm-i386v42mp.h
 403         (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
 404         Add other macros for hardware assisted watchpoints.
 405         * config/i386/nm-i386sco5.h: Correct attributions.
 406         (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
 407         * config/i386/nm-linux.h (target_remote_watchpoint): Pass
 408         'type' through to i386_insert_watchpoint.
 409
 410 Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
 411
 412         * infrun.c (wait_for_inferior): Don't add signalled processes
 413         as new threads.
 414         * procfs.c (wait_fd): Note if LWP has exited.
 415         (procfs_wait): use GETPID to get process ID.
 416
 417 Sat Apr 18 15:21:04 1998  Stan Cox  <scox@cygnus.com>
 418
 419         * configure.tgt: Added sparc86x support.
 420
 421 Thu Apr 16 13:13:24 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 422
 423         * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
 424         error string if in an ANSI C-ish environment.
 425
 426 Wed Apr 15 18:59:48 1998  Mark Alexander  <marka@cygnus.com>
 427
 428         * sparc-tdep.c (SPARC_HAS_FPU): Define.
 429         (sparc_extract_return_value): New function, required to handle
 430         machines without floating point.
 431         (sparc_store_return_value): Ditto.
 432         * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
 433         sparc_extract_return_value instead of using inline code.
 434         (sparc_extract_return_value): Declare.
 435         (STORE_RETURN_VALUE): Call sparc_store_return_value instead
 436         of using inline code.
 437         (sparc_store_return_value): Declare.
 438
 439 Wed Apr 15 12:19:42 1998  Martin M. Hunt  <hunt@cygnus.com>
 440
 441         * solib.c (enable_break): Only call warning once
 442         instead of three times.
 443
 444 Tue Apr 14 16:52:59 1998  Mark Alexander  <marka@cygnus.com>
 445
 446         * sparc-tdep.c (sparc_extract_struct_value_address): Make it
 447         work correctly on little-endian hosts.
 448         (sparc_push_arguments): New function.
 449         (gdb_print_insn_sparc): New function.
 450         (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
 451         disassembler, so that SPARClite-specific instructions will
 452         be recognized.
 453         * sparcl-tdep.c (readchar): Print debugging information.
 454         (debug_serial_write): New function, a replacement for SERIAL_WRITE
 455         that prints debugging information.
 456         * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
 457         (sparc_push_arguments): Declare.
 458
 459 Tue Apr 14 15:43:49 1998  John Metzler  <jmetzler@cygnus.com>
 460
 461         * gdbcfgxref (xref_menu): Call new regex and wild card searches
 462         Now you can type in a specific triple like mips64-vr4320-elf or
 463         somthing like mips*.h
 464         (triple_search) wildcardsearch): The new functions
 465
 466         * configure.tgt: Switch over to use tm-4320.h. Since I switched to
 467         MIPS EABI the fixes are no longer backward compatible with 4300.
 468         * tm-vr4320.h: Added
 469         * vr4320.mt:   Added
 470
 471 Mon Apr 13 16:28:07 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 472
 473         * utils.c: (warning) added call to warning_hook
 474
 475         * source.c: (find_source_lines) modified to call warning in case
 476         of source vs. executable time stamp mismatch. Simplified object
 477         file check. Initialized mtime to 0.
 478
 479         * defs.h: added warning_hook prototype
 480
 481         * top.c: added warning_hook prototype.
 482
 483 Mon Apr 13 09:54:08 1998  Keith Seitz  <keiths@andros.cygnus.com>
 484
 485         * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
 486         definition.
 487
 488 Fri Apr 10 22:36:28 1998  Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
 489
 490         Update support for x86 Solaris 2.
 491         * config/i386/tm-i386sol2.h, nm-i386sol2.h:  New configuration
 492         files for x86 Solaris 2.
 493         * config/i386/i386sol2.mt, i386sol2.mh:  Use them.
 494         * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY):  New macro, extract
 495         carry flag from a given regset.
 496         (IS_STATIC_TRANSFORM_NAME):  New macro, check if a symbol name
 497         is a SunPro transformed name.
 498         * i386-tdep.c (sunpro_static_transform_name):  New function to
 499         extract the source name from a SunPro transformed name.
 500         * inferior.h (procfs_first_available, procfs_get_pid_fd):
 501         Add prototypes.
 502         * infrun.c (wait_for_inferior):  Handle breakpoint hit in
 503         signal handler without intervening stop in sigtramp.
 504         * procfs.c (procfs_lwp_creation_handler):  Use PROCFS_GET_CARRY
 505         instead of direct access to the status register.
 506         (procfs_get_pid_fd):  New function, returns procfs fd for a given pid.
 507         * sol-thread.c (ps_lgetLDT):  New function, returns LDT for a given
 508         lwpid.
 509         (sol_find_new_threads):  Handle failed libthread_db initialization
 510         gracefully.
 511         * stabsread.c (define_symbol):  Use IS_STATIC_TRANSFORM_NAME
 512         to check for a SunPro transformed symbol name.
 513
 514 Fri Apr 10 10:35:35 1998  John Metzler  <jmetzler@cygnus.com>
 515
 516         * utils.c (fmthex): A formatting function for hexdumps
 517
 518         *  mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
 519         bit pattern interpretations. mips_fetch_instruction does not work
 520         for 16 bit instructions. Some confusion remains about sign
 521         extension in backward branches.
 522         (mips32_relative_offset): Sign extension
 523         (mips32_next_pc): Major debugging, bit pattern interpretation
 524         (print_unpack): debugging printf
 525         (fetch_mips_16): new funtion, key on PC low bit, not symbol table
 526         (mips16_next_16): Initial major debugging of this function. Lots
 527         of bit pattern mistakes.
 528         (mips_next_pc): key on low bit of PC, not symbol table.
 529         * symfile.c(generic_load) : Added a download verification which
 530         reads back the loade code. Download chunk size is now a defined
 531         macro. Fixed a bug in which downloading slips into loading one
 532         byte at a time. Lower level functions in monitor.c can load long
 533         sequences of bytes and make use of these fixups.  Referencing
 534         bfd-start_address directly was incorrectly getting zero for start.
 535
 536 Thu Apr  9 19:20:32 1998  Ian Lance Taylor  <ian@cygnus.com>
 537
 538         * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
 539         with dynamic size.
 540
 541 Wed Apr  8 19:21:42 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 542
 543         * top.c (print_gdb_version): Print 1998 now.
 544
 545 Wed Apr  8 16:57:22 1998  Philippe De Muyter  <phdm@macqel.be>
 546
 547         * source.c: Remove obsolete decl of strstr().
 548
 549 Wed Apr  8 16:47:33 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 550
 551         * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
 552         patch of March 23 1998.
 553         * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
 554         patch of March 23 1998.
 555
 556 Sat Apr  4 10:05:00 1998  Dawn Perchik  <dawn@cygnus.com>
 557
 558         * mdebugread.c (parse_partial_symbols): If this is an .mdebug
 559         section in an ELF file, override a symbol's ECOFF section with its
 560         ELF section.  Also, fix stabs continuation where a stabs string
 561         continues for more than one continuation.
 562
 563 Mon Apr  6 09:17:48 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 564
 565         * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
 566         using MAX_REGISTER_RAW_SIZE.
 567
 568 Sat Apr  4 10:05:00 1998  Dawn Perchik  <dawn@cygnus.com>
 569
 570         * infrun.c: Fix prototype of signals_info to match static funtion.
 571
 572 Thu Apr  2 12:47:41 1998  Frank Ch. Eigler  <fche@cygnus.com>
 573
 574         * sol-thread.c (sol_thread_store_registers): Save & restore new
 575         value of single updated register to prevent accidental clobbering.
 576
 577 Wed Apr  1 22:01:09 1998  Mark Alexander  <marka@cygnus.com>
 578
 579         * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
 580         * config/sparc/sparclite.mt: Link in the erc32 simulator.
 581
 582 Wed Apr  1 16:30:49 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
 583
 584         * ns32k-tdep.c (flip_bytes, ns32k_localcount,
 585         ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
 586         deleted.
 587
 588         * ns32knbsd-nat.c: New (?) file to support fetching and storing
 589         registers on NetBSD hosts.
 590
 591         * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
 592         ns32k-nat.o
 593
 594         * ns32km3-nat.c (reg_offset): Get order of floating point
 595         registers correct. Add extra 32382 register offsets.
 596         (REG_ADDRESS): define to point at correct part of thread
 597         state. Use calls to "warning" instead of "message".
 598
 599         * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
 600         REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
 601         fpu registers.
 602
 603 Wed Apr  1 13:43:07 1998  Philippe De Muyter  <phdm@macqel.be>
 604
 605         * NEWS: m68k-motorola-sysv host support added.
 606         * coffread.c (coff_start_symtab): Accept the filename as an argument,
 607         set it here.  Callers updated.
 608
 609 Wed Apr  1 23:13:23 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 610
 611         * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
 612         FSR and FIR registers.
 613         (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
 614         (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
 615
 616         * config/mips/tm-mips64.h: Ditto.
 617
 618 Tue Mar 31 21:30:39 1998  Nick Clifton  <nickc@cygnus.com>
 619
 620         * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
 621         vector to the info structure when disassembling thumb
 622         instructions.
 623
 624         * coffread.c (coff_symtab_read, read_one_sym,
 625         process_coff_symbol):  Support Thumb symbol types.
 626
 627         * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
 628         is defined) for function symbols.
 629
 630 Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 631
 632         * d10v-tdep.c (d10v_extract_return_value): Wierd.  GCC wants to
 633         return odd sized register quantities with only half of the first
 634         register used!
 635
 636         * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
 637         size > 8.
 638
 639 Mon Mar 30 16:42:12 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 640
 641         * rdi-share/Makefile.am, rdi-share/aclocal.m4,
 642         rdi-share/configure: New files.
 643         * rdi-share/configure.in:  Rewritten to be an autoconf input file.
 644         * rdi-share/Makefile.in, rdi-share/configure: Generated by
 645         automake/autoconf.
 646         * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
 647         to check environment.
 648
 649 Sun Mar 29 15:17:16 1998  Keith Seitz  <keiths@onions.cygnus.com>
 650
 651         * tracepoint.c (trace_start_command): Set trace_running_p.
 652         (trace_stop_command): Clear trace_running_p.
 653
 654 Sat Mar 28 15:19:48 1998  Stan Shebs  <shebs@andros.cygnus.com>
 655
 656         * NEWS: Update for 4.17 release.
 657
 658 Thu Mar 26 22:29:28 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 659
 660         * tracepoint.c (trace_status_command): Recognize a boolean return
 661         value from the stub to indicate whether trace experiment is
 662         running.  Export this value as a global state variable.
 663         (trace_running_p) for use by the GUI. (from Michael Snyder)
 664         (trace_pass_command) added call to modify_tracepoint_hook.
 665
 666         * tracepoint.h export trace_running_p.
 667
 668 start-sanitize-sky
 669 Wed Mar 25 11:45:19 1998  Frank Ch. Eigler  <fche@cygnus.com>
 670
 671         * configure.in (sim-gpu2): Added target type checking to make
 672         --with-sim-gpu2 option only valid for sky target.
 673         * configure: Regenerated.
 674 end-sanitize-sky
 675
 676 Tue Mar 24 16:22:40 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 677
 678         * Makefile.in:  Derive SHELL from configure.
 679         * config/d10v/d10v.mt config/m32r/m32r.mt
 680         config/mn10200/mn10200.mt config/mn10300/mn10300.mt :  Remove -lm
 681         from SIM.  This prevents dependency checking of -lm (under NT
 682         native builds).  (It is automatically added by configure if it
 683         exists.)
 684 start-sanitize-d30v
 685         * config/d30v/d30v.mt: Ditto.
 686 end-sanitize-d30v
 687         * doc/configure mswin/configure nlm/configure
 688         testsuite/gdb.base/configure testsuite/gdb.c++/configure
 689         testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
 690         testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
 691         Regenerate with autoconf 2.12.1 to fix shell issues for NT native
 692         builds.
 693
 694 Mon Mar 23 18:10:57 1998  Ulrich Drepper  (drepper@cygnus.com)
 695
 696         * solib.c (solib_create_inferior_hook):  Rewrite previous
 697         change to check the type of file via BFD.
 698
 699 Mon Mar 23 13:52:28 1998  Ulrich Drepper  (drepper@cygnus.com)
 700
 701         * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
 702         like bp_breakpoints.
 703         * solib.c (solib_create_inferior_hook): Relocate section addresses
 704         if the alleged start address doesn't agree with the PC.
 705
 706 start-sanitize-sky
 707 Mon Mar 23 13:07:22 1998  Frank Ch. Eigler  <fche@cygnus.com>
 708
 709         * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure
 710         option, to allow gdb+sim linking with sky GPU2 library.
 711         * configure: Regenerated.
 712
 713 end-sanitize-sky
 714 Sat Mar 21 19:34:49 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 715
 716         merged changes from Foundry (list follows by file/author):
 717
 718         - Tom Tromey  <tromey@cygnus.com>
 719         * Makefile.in (gdbres.o): New target.
 720         (WINDRES): New define.
 721         * configure: Rebuilt.
 722         * configure.in (WINDRES): Define.
 723         (CONFIG_OBS): Include gdbres.o on Windows.
 724         * gdbtool.ico: New file.
 725         * gdb.rc: New file.
 726
 727         * ser-unix.c
 728         - Keith Seitz  <keiths@onions.cygnus.com>
 729         (wait_for): Don't reset the timeout_remaining for CYGWIN32,
 730         since we now effectively poll the serial port.
 731         Don't reset the current_timeout, either, since this member is used
 732         by hardwire_readchar to track the timeout and call the ui_loop_hook.
 733         (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
 734         every second, update the UI, and loop around doing this until we
 735         have hit the real timeout or we get data or an error. This will
 736         allow the UI to stay active while gdb is "blocked" talking to the
 737         target.
 738         - Martin M. Hunt  <hunt@cygnus.com>
 739         (wait_for): Do reset current_timeout because it is only used to
 740         keep track of what the current timeout for the scb is.
 741
 742         * top.c
 743         - Martin M. Hunt  <hunt@cygnus.com>
 744         (quit_confirm): Change exit message again
 745         for GUI.
 746         (pc_changed_hook): Add prototype.
 747         - Tom Tromey  <tromey@cygnus.com>
 748         (quit_confirm): Added missing `else'.
 749         (quit_confirm): Special-case message if init_ui_hook is
 750         set.
 751
 752         * symtab.c
 753         - Martin M. Hunt  <hunt@cygnus.com>
 754         (find_pc_sect_line): If no symbol information
 755         is found, return correct pc anyway.
 756         (find_methods): Comment out an apparently
 757         bogus error message because it messes up Foundry.
 758
 759         * serial.c
 760         - Martin M. Hunt  <hunt@cygnus.com>
 761         (_initialize_serial): Add a description of
 762         "set remotelogbase".
 763
 764         * findvar.c
 765         - Martin M. Hunt  <hunt@cygnus.com>
 766         (write_register_gen): Add call to
 767         pc_changed_hook if the PC is being changed.
 768
 769         * defs.h
 770         - Martin M. Hunt  <hunt@cygnus.com>
 771         (pc_changed_hook): Define.
 772
 773         * command.c
 774         -  Martin M. Hunt  <hunt@cygnus.com>
 775         (do_setshow_command): If no arguments are supplied,
 776         don't dump core, instead print out an error message.
 777
 778         * breakpoint.c
 779         - Martin M. Hunt  <hunt@cygnus.com>
 780         Make set_raw_breakpoint, set_breakpoint_count,
 781         and breakpoint_count non-static so they are accessible from
 782         gdbtk.c.
 783         (enable_breakpoint): Enable breakpoint
 784         with same disposition instead of changing all breakpoints
 785         to donttouch.
 786
 787         * annotate.h
 788         - Keith Seitz  <keiths@onions.cygnus.com>
 789         Add declarations for annotation hooks.
 790
 791         * annotate.c
 792         - Keith Seitz  <keiths@onions.cygnus.com>
 793         Add hooks: annotate_starting_hook, annotate_stopped_hook,
 794         annotate_signalled_hook, annotate_exited_hook.
 795         (annotate_starting): If hook exists, call it instead.
 796         (annotate_stopped): If hook exists, call it instead.
 797         (annotate_exited): If hook exists, call it instead.
 798         (annotate_signalled): If hook exists, call it instead.
 799
 800 Fri Mar 20 14:45:36 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
 801
 802         * gdbserver/Makefile.in: add dependency on XM_CLIBS.
 803         * gdbserver/low-sim.c (registers) force into alignment.
 804         (create_inferior): Fix typo on new_argv; add abfd arg to
 805         sim_open, sim_create_inferior.  Add reg_size arg to
 806         sim_fetch_register, sim_store_register.  Make simulator
 807         take a single-step to get into a known running state.
 808         * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
 809         * gdbserver/server.c: Add remote_debug variable to control
 810         debug output.
 811         * gdbserver/server.h: Add prototypes for enable/disable_async_io.
 812         * gdbserver/remote-utils.c: add verbose debugging output controlled
 813         by "remote_debug" variable.  Add call to "disable_async_io()"
 814         to avoid being killed by async SIGIO signals.
 815         * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
 816         so that gdbserver can be built with the m32r simulator.
 817
 818 Fri Mar 20 09:04:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 819
 820 start-sanitize-r5900
 821         * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as
 822         expression from REGISTER_VIRTUAL_TYPE.
 823         (REGISTER_RAW_SIZE): Ditto.
 824         (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit
 825         registers.
 826
 827 end-sanitize-r5900
 828         * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
 829         types.
 830 start-sanitize-r5900
 831         (builtin_type_{,u}int128): Ditto.
 832 end-sanitize-r5900
 833
 834         * gdbtypes.c (_initialize_gdbtypes): Initialize new types.
 835
 836         * mips-tdep.c (do_gp_register_row): Pad register value when GP
 837         register is smaller than MIPS_REGSIZE.
 838
 839         * findvar.c (value_of_register): When raw and virtual register
 840         values identical, check that sizes are consistent.
 841
 842 Thu Mar 19 11:32:15 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
 843
 844         * minsyms.c (compare_minimal_symbols): If addresses are identical,
 845         then compare on names.  Sorted list should have symbols with
 846         identical addresses AND names adjacent, so dups can be discarded.
 847
 848 Wed Mar 18 12:50:17 1998  Jeff Law  (law@cygnus.com)
 849
 850         * stabsread.c (define_symbol): Don't look for ',' as a LRS
 851         indicator.
 852
 853 Wed Mar 18 10:34:51 1998  Nick Clifton  <nickc@cygnus.com>
 854
 855         * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
 856
 857 Fri Mar 13 15:43:53 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 858
 859         * config/mips/xm-mips.h (CC_HAS_LONG_LONG):  Undefine for Ultrix
 860         when compiling with native cc, the compiler has broken long long
 861         support.
 862
 863 Fri Mar 13 15:37:02 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 864
 865         * config/m68k/xm-sun3os4.h:  Remove malloc declarations, they
 866         are handled via autoconf now.
 867         * remote.c (remote_ops, extended_remote_ops):  Replace static
 868         forward declaration by moving the static definition to the top of
 869         the file, for old K&R compilers.
 870         * tracepoint.c (collect_symbol, trace_start_command):
 871         Replace ANSI string concatenation with K&R compatible simple string.
 872
 873 1998-03-11  Fred Fish  <fnf@ninemoons.com>
 874
 875         * source.c (select_source_symtab): Don't reach error if we have
 876         a current_source_symtab from reading in partial symbol table.
 877
 878 start-sanitize-vr4320
 879 Tue Mar 10 16:15:13 1998  Gavin Koch  <gavin@cygnus.com>
 880
 881         * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case.
 882
 883 end-sanitize-vr4320
 884 Fri Mar  6 13:10:27 1998  Fred Fish  <fnf@cygnus.com>
 885
 886         * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
 887         SERIAL_FLUSH_OUTPUT.
 888         * serial.h (struct serial_ops): Add drain_output, pointer to
 889         function that waits for output to drain.
 890         (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
 891         * ser-unix.c (hardwire_drain_output): New function and prototype.
 892
 893         * ser-unix.c (hardwire_ops): Add entry for drain_output function.
 894         * ser-tcp.c (tcp_ops): Ditto.
 895         * ser-ocd.c (ocd_ops): Ditto.
 896         * ser-mac.c (mac_ops): Ditto.
 897         * ser-go32.c (dos_ops): Ditto.
 898         * ser-e7kpc.c (e7000pc_ops): Ditto.
 899
 900 Thu Mar  5 16:07:41 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
 901
 902         * sparcl-tdep.c: fix #endif comments
 903
 904 Thu Mar  5 15:10:35 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 905
 906         * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
 907
 908 Thu Mar  5 14:42:41 1998  Keith Seitz  <keiths@onions.cygnus.com>
 909
 910         * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
 911         error () so that we abort out of bdm_ppc_open.
 912
 913 Wed Mar  4 16:53:52 1998  Martin M. Hunt  <hunt@cygnus.com>
 914
 915         * serial.c (_initialize_serial): Add a description of
 916         "set remotelogbase".
 917
 918         * command.c (do_setshow_command): If no arguments are supplied,
 919         don't dump core, instead print out an error message.
 920
 921 Wed Mar  4 16:50:18 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 922
 923         * gdbtk.c (gdb_listfiles): Fix thinko in last change.
 924
 925 Wed Mar  4 15:34:49 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 926
 927         * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.
 928
 929 Wed Mar  4 01:39:08 1998  Ron Unrau  <runrau@cygnus.com>
 930
 931         * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
 932         MAKE_MSYMBOL_SPECIAL
 933         * config/mips/tm-mips.h: ditto
 934
 935 Tue Mar  3 17:19:08 1998  John Metzler  <jmetzler@cygnus.com>
 936
 937         * config/mips/tm-vr4xxx.h:  implements vr4111 as separate from 4300
 938         * config/mips/vr4xxx.tm:    implements vr4111 as separate from 4300
 939         * configure.tgt:  Recognise mips64vr4111-*-elf as vr4xxx
 940         * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
 941         TARGET_PTR_BIT rather from sizeof(char *) on host.
 942
 943 Tue Mar  3 14:37:02 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 944
 945         * alpha-nat.c (fetch_osf_core_registers):  Renamed from
 946         fetch_aout_core_registers.
 947         (alpha_osf_core_fns):  Renamed from alpha_aout_core_fns, change
 948         flavour to bfd_target_unknown_flavour for OSF core files.
 949
 950 start-sanitize-vr4320
 951 Tue Mar  3 11:12:39 1998  Gavin Koch  <gavin@cygnus.com>
 952
 953         * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
 954         Added.
 955
 956 end-sanitize-vr4320
 957 Mon Mar  2 17:44:13 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
 958
 959         * breakpoint.c (_initialize_breakpoint): Make "en" an alias
 960         for "enable" (so that it doesn't conflict with "end").
 961
 962 Mon Mar  2 17:04:25 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 963
 964         * Makefile (VERSION): Bump to 4.17.1.
 965
 966 Mon Mar  2 16:59:15 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 967
 968         * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
 969
 970 Mon Mar  2 16:51:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 971
 972         * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
 973
 974 Mon Mar  2 16:47:11 1998  Philippe De Muyter  <phdm@macqel.be>
 975
 976         * Makefile.in (distclean): Add `rm $(YYFILES)'.
 977
 978 Mon Mar  2 16:45:48 1998  Philippe De Muyter  <phdm@macqel.be>
 979
 980         * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
 981         is unsigned.
 982
 983 Sun Mar  2 15:16:13 1998 Richard Henderson  <rth@cygnus.com>
 984
 985         * configure.host, configure.tgt: Add sparc-linux.
 986         * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
 987         * config/sparc/*linux*: New files.
 988
 989 Mon Mar  2 12:12:41 1998  Anthony Thompson   (athompso@cambridge.arm.com)
 990
 991         * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
 992         if we're big endian; else call print_insn_little_arm.
 993
 994 Mon Feb 24 11:24:57 1998  Richard Henderson  <rth@cygnus.com>
 995
 996         * Makefile.in (BISON): Don't even pretend to use yacc.
 997         (c-exp.tab.o): Use bison -o to use a unique intermediate file.
 998         (f-exp.tab.o, m2-exp.tab.o): Likewise.
 999 start-sanitize-java
1000         (jv-exp.tab.o): Likewise.
1001 end-sanitize-java
1002
1003 Tue Feb 24 03:32:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1004
1005         * remote-sim.c (gdbsim_fetch_register): Don't abort when the
1006         register size is wrong.
1007
1008 start-sanitize-r5900
1009 Tue Feb 24 02:53:41 1998  And<rew Cagney  <cagney@b1.cygnus.com>
1010
1011         * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE,
1012         REGISTE_RAW_SIZE): Re-define.
1013
1014 end-sanitize-r5900
1015 Thu Feb 19 16:49:48 1998 John Metzler  <jmetzler@cygnus.com>
1016
1017         * target.c (debug_to_fetch_registers,debug_to_store_registers,
1018         debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
1019         64 bit targets crashed long long printfs.
1020
1021 Tue Feb 17 16:36:22 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
1022
1023         * symfile.c (read_target_int_array): rename read_target_long_array
1024         and force the sizeof an ovly_table element to sizeof(long),
1025         instead of sizeof(int).
1026
1027 Tue Feb 17 18:05:05 1998  Frank Ch. Eigler  <fche@cygnus.com>
1028
1029         * remote-mips.c (mips_request): Use unsigned long during parsing
1030         returned value from monitor, to prevent accidental sign extension.
1031
1032 Tue Feb 17 14:28:33 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1033
1034         * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
1035         * configure.in: Ditto.
1036         * configure: Regenerated.
1037
1038 Tue Feb 17 14:07:34 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1039
1040         * gdbtypes.c (check_typedef): Do not try to resolve the length of
1041         a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
1042         set TYPE_FLAG_TARGET_STUB as well.
1043
1044 Tue Feb 17 14:32:18 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1045
1046         * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
1047         Pass register size to sim_{fetch,store}_register.  Check nr of
1048         register bytes transfered is correct.
1049
1050 Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1051
1052         * remote-d10v.c (remote_d10v_open): Call push_remote_target
1053         instead of open_remote_target.
1054
1055         * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
1056         to translate addr/size when defined.
1057         (open_remote_target): Delete.
1058
1059         * target.h (open_remote_target): Delete.
1060
1061         * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
1062
1063 Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1064
1065         * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
1066         sizeof type > 1.
1067
1068 Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1069
1070         * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
1071         sizeof type > 1.
1072
1073 Sun Feb 15 16:10:50 1998  Ron Unrau   <runrau@cygnus.com>
1074
1075         * parse.c (write_dollar_variable): call new function
1076           target_map_name_to_register to allow targets to define their own
1077           register name aliases.
1078         * infcmd.c (registers_info): use target_map_name_to_register so that
1079           "print $reg" and "info reg $reg" use the same register name aliases.
1080
1081 Fri Feb 13 16:40:30 1998  Stan Shebs  <shebs@andros.cygnus.com>
1082
1083         * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
1084         * config/i386/xm-i386mk.h: Fix an include.
1085         * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
1086
1087 Thu Feb 12 16:12:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
1088
1089         * remote-mips.c (mips_enter_debug): Sleep before sending CR to
1090         monitor.
1091         (mips_exit_debug): Accept any whitespace / verbiage before monitor
1092         prompt reappears.
1093
1094 Thu Feb 12 18:25:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1095
1096         * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
1097         accumulators.
1098
1099 Thu Feb 12 17:10:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1100
1101         * valops.c (value_at): For d10v, make read pointers with
1102         read_target_unsigned_integer, keep addresses unsigned.
1103         (value_fetch_lazy): Ditto.
1104
1105 Thu Feb 12 12:14:02 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1106
1107         * remote-d10v.c: New file.  Layer the d10v GDB->remote memory map
1108         on top of the remote serial memory transfer functions.
1109
1110         * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
1111
1112         * Makefile.in (remote-d10v.o): Add dependencies.
1113
1114         * remote.c (remote_open_1): Add arg extended_p, engage extended
1115         protocol when extended_p.
1116         (remote_open, extended_remote_open): Pass !extended_p /
1117         extended_p to remote_open_1.
1118
1119         * remote.c (open_remote_target), target.h: New function.
1120
1121 Wed Feb 11 08:41:15 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1122
1123         * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
1124
1125 Tue Feb 10 17:50:37 1998  Keith Seitz  <keiths@onions.cygnus.com>
1126
1127         * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
1128         if it exists.
1129         Remove static declaration of free_actions.
1130
1131         * tracepoint.h: Add declaration of free_actions.
1132
1133 Tue Feb 10 12:17:13 1998  Fred Fish  <fnf@cygnus.com>
1134
1135         * symtab.c (decode_line_1): Revert change that mistakenly
1136         removed assignment of sals[0].pc field.
1137
1138 Mon Feb 10 12:37:47 1998  Philippe De Muyter  <phdm@macqel.be>
1139
1140         * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
1141         `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
1142         `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
1143         (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
1144         is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
1145         (FRAME_NUM_ARGS): New macro.
1146         * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
1147         * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
1148         patch.
1149
1150 Mon Feb  9 11:10:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1151
1152         * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
1153         D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
1154
1155         * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
1156         (DMEM_START): Move to 0x00......
1157         (STACK_START): Move to 0x00..7ffe.
1158         (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
1159
1160         * d10v-tdep.c (d10v_xlate_addr): Delete function.
1161
1162 Mon Feb  9 15:10:21 1998  Fred Fish  <fnf@cygnus.com>
1163
1164         * symtab.c (fixup_psymbol_section): Move forward declaration to
1165         top of file with other such decls.  Make it a static function.
1166         * symtab.h: Minor formatting tweaks.
1167
1168 Mon Feb  9 13:14:12 1998  Stan Shebs  <shebs@andros.cygnus.com>
1169
1170         * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
1171         Remove redefinition.
1172         * config/i960/tm-i960.h (BREAKPOINT): Define.
1173
1174 Mon Feb  9 15:35:38 1998  Ian Lance Taylor  <ian@cygnus.com>
1175
1176         * Makefile.in (init.c): Ignore errors when making init.c.  Seems
1177         necessary to work around bug in Solaris make.
1178
1179 Sun Feb  6 02:44:28 1997  Philippe De Muyter  <phdm@macqel.be>
1180
1181         * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
1182         (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
1183         (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
1184         because floating-point values return via %fp0.
1185         (CLEAR_INSN_CACHE): New macro.
1186         * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
1187         to use DOUBLEST.
1188         (REGISTER_CONVERT_TO_RAW): Ditto.
1189         * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
1190         call it after having written in child process's memory.
1191         * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
1192         (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
1193
1194 Fri Feb  6 16:17:30 1998  Jeffrey A Law  (law@cygnus.com)
1195
1196         * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
1197         override.
1198         (TARGET_LONG_LONG_BIT): Likewise.
1199         (TARGET_PTR_BIT): Likewise.
1200 start-sanitize-r5900
1201         * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits.
1202 end-sanitize-r5900
1203
1204 start-sanitize-sky
1205 Fri Feb  6 14:33:34 1998  Doug Evans  <devans@canuck.cygnus.com>
1206
1207         * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
1208         * config/mips/txvu.mt (SIM): txvu -> mips.
1209
1210 end-sanitize-sky
1211 Fri Feb  6 17:42:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1212
1213         * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
1214         D10V_CONVERT_DADDR_TO_RAW): Define.
1215
1216         * d10v-tdep.c (d10v_push_arguments): Re-write.  Pass arguments in
1217         registers, regardless of their size, when they fit.
1218
1219 Thu Feb  5 13:16:36 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1220
1221         * d10v-tdep.c (d10v_extract_return_value): For function pointers
1222         translate address to IMAP area.
1223
1224         * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
1225         struct.
1226         (POP_FRAME): Point at generic_pop_current_frame.
1227
1228         * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
1229         handled earlier.
1230         (d10v_push_return_address): New function.
1231         (d10v_pop_dummy_frame): Delete.
1232         (d10v_fix_call_dummy): Delete.
1233         (d10v_call_dummy_address): Delete.
1234
1235         * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
1236         frameless.
1237
1238         * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
1239
1240         * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
1241         address of structure from first ARG1_REGNUM.
1242
1243         * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
1244         even-odd register pair.  Store 1 and 2 byte args in registers.
1245
1246         * valops.c (value_fetch_lazy): Ensure that a D10V function pointer
1247         is fetched in the correct byte order.
1248         (value_at): Ditto. Also ensure data pointers are mapped to data
1249         segment.
1250
1251         * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P):
1252
1253         * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
1254         (d10v_pop_frame): Replace R13 with LR_REGNUM.
1255         (d10v_push_arguments): Replace R2 with ARG1_REGNUM.
1256         (d10v_push_arguments): Replace 6 with ARGN_REGNUM.
1257         (d10v_extract_return_value): Access return value with RET1_REGNUM.
1258
1259         * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
1260         Define.
1261         (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
1262         (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
1263         location.
1264
1265 Thu Feb  5 13:16:36 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1266
1267         * blockframe.c (generic_pop_dummy_frame): Flush the frame, no
1268         longer valid.
1269
1270         * blockframe.c (generic_pop_current_frame), frames.h: New
1271         function.
1272
1273 Thu Feb  5 17:18:16 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1274
1275         * remote-sim.c (gdbsim_create_inferior): clear_proceed_status
1276         before /re/starting the simulator.
1277
1278 Thu Feb  5 15:55:31 1998  C. M. Heard (heard@vvnet.com)
1279
1280         * top.c (do_nothing): Remove signal handler after signal is caught.
1281
1282 Thu Feb  5 11:57:06 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
1283
1284         * tracepoint.c (tracepoint_operation): call free_actions instead
1285         of free.  (free_actions): eliminate some memory leaks for actions.
1286         (validate_actionline): pass string arg by reference, so we can
1287         change the pointer.  Change all memrange collection arguments to
1288         canonical form (literal address and size), to enforce early
1289         evaluation.  Accept UNOP_MEMVAL (assembly variables) for
1290         trace collection.  (parse_and_eval_memrange): accept expressions
1291         for the address and size fields of a memrange (and evaluate
1292         them immediately).  (several places): use -1 instead of zero
1293         to distinguish an absolute memrange from a register-relative one.
1294         (encode_actions): add handling for UNOP_MEMVAL (assembly variable).
1295
1296 Wed Feb  4 17:40:21 1998  Jason Molenda  (crash@bugshack.cygnus.com)
1297
1298         * Makefile.in (SFILES): add tracepoint.c.
1299         (LINTFILES): add @CONFIG_SRCS@.
1300         (SOURCES): Ditto.
1301         * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
1302         * configure: Regenerated.
1303
1304 Tue Feb  3 16:12:32 1998  Gordon W. Ross (gwr@mc.com)
1305
1306         * infptrace.c (child_resume): Don't try to step if
1307         NO_SINGLE_STEP is defined.
1308
1309 Mon Feb  2 19:06:13 1998  Jason Molenda  (crash@bugshack.cygnus.com)
1310
1311         * Makefile.in (VERSION): Bump to 4.16.2.
1312
1313 Mon Feb  2 17:18:25 1998  Richard Henderson  <rth@cygnus.com>
1314
1315         * alpha-nat.c (fetch_aout_core_registers): Rename from
1316         fetch_core_registers.
1317         (fetch_elf_core_registers): New function.
1318         (supply_gregset): Use ALPHA_REGSET_BASE.
1319         (supply_fpregset): Likewise.
1320         (fill_fpregset): Likewise.
1321         (alpha_aout_core_fns): Rename from alpha_core_fns.
1322         (alpha_elf_core_fns): New.
1323         * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
1324         Disable MMALLOC.
1325         * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
1326         (TARGET_ELF64): Likewise.
1327         (ALPHA_REGSET_BASE): New.
1328         * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
1329         * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
1330
1331         * solib.c (elf_locate_base): Add TARGET_ELF64 support.
1332         (info_sharedlibary_command): Likewise.
1333
1334         * configure.host: Match alpha*.
1335         * configure.tgt: Likewise.
1336
1337 Fri Jan 30 15:11:38 1998  David Taylor  <taylor@texas.cygnus.com>
1338
1339         Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
1340         * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
1341         whether we are in the dynamic symbol resolution code
1342         (wait_for_inferior): invoke it.
1343         * solib.c (in_svr4_dynsym_resolve_code): new function
1344         (enable_break): record start and end of the dynamic linker
1345         text and plt sections for use in in_svr4_dynsym_resolve_code.
1346         * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
1347         (in_svr4_dynsym_resolve_code): declare it.
1348         * config/nm-gnu.h (solib.h): move inclusion to after definition
1349         of SVR4_SHARED_LIBS.
1350         * config/nm-sysv4.h (solib.h): ditto.
1351         * config/i386/nm-i386sco5.h (solib.h): ditto.
1352         * config/i386/nm-linux.h (solib.h): ditto.
1353         * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
1354
1355 Thu Jan 29 19:39:31 1998  Stan Shebs  <shebs@andros.cygnus.com>
1356
1357         * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
1358         never be defined.
1359         * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
1360         Remove, no longer needed.
1361         * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
1362         * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
1363         * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
1364         * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
1365
1366 Wed Jan 28 14:46:52 1998  Stan Shebs  <shebs@andros.cygnus.com>
1367
1368         Suggested by Chris Walter <walter@budoe.bu.edu>:
1369         * dwarfread.c (set_cu_language): Recognize Fortran.
1370         * dwarf2read.c (set_cu_language): Ditto.
1371         (read_array_type): Fix language test.
1372
1373 Wed Jan 28 12:51:08 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
1374
1375         * blockframe.c (generic_frame_chain_valid): A frame pointer may
1376         be valid if it is equal to the frame pointer of its caller (ie.
1377         not necessarily strictly INNER_THAN).  Allows frameless functions.
1378
1379 Wed Jan 28 11:23:25 1998  Mark Alexander  <marka@cygnus.com>
1380
1381         * monitor.c (monitor_vsprintf): New function to handle
1382         printing of large addresses using %A format specifier.
1383         (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
1384         instead of vsprintf.
1385         * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
1386         to print addresses.
1387
1388 Tue Jan 27 16:14:23 1998  Jason Molenda  (crash@bugshack.cygnus.com)
1389
1390         * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
1391         when using GNU ld.
1392
1393 Mon Jan 26 19:07:46 1998  Jason Molenda  (crash@bugshack.cygnus.com)
1394
1395         * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
1396         Add closing parenthesis.  From HJ Lu.
1397
1398 Mon Jan 26 17:54:45 1998  Mark Alexander  <marka@cygnus.com>
1399
1400         * dve3900-rom.c: Improve performance by using memory commands
1401         that print less fluff.  Minor cosmetic changes.
1402         Eliminate compiler warnings.
1403
1404 Sat Jan 24 23:44:43 1998  Martin M. Hunt  <hunt@cygnus.com>
1405
1406         * breakpoint.c (enable_breakpoint): Preserve breakpoint
1407         disposition when enabling a breakpoint.
1408
1409         * symtab.c (find_pc_sect_line): If no symbol information
1410         is found, return correct pc anyway.
1411
1412 Fri Jan 23 17:26:22 1998  Stan Shebs  <shebs@andros.cygnus.com>
1413
1414         * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
1415         ns32k-*-mach3*): Fix file names.
1416         (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
1417         recognition, no source files for these.
1418         * configure.tgt (powerpc-*-aix4*): Remove config, now identical
1419         to powerpc-*-aix*.
1420         * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
1421         no longer needed.
1422
1423 Fri Jan 23 16:49:41 1998  Mark Alexander  <marka@cygnus.com>
1424
1425         * monitor.c (monitor_write, monitor_readchar): New functions.
1426         * monitor.h (monitor_write, monitor_readchar): Declare.
1427         * dve3900-rom.c: Add support for fast loading on ethernet connections.
1428
1429 Fri Jan 23 07:47:06 1998  Fred Fish  <fnf@cygnus.com>
1430
1431         * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
1432         (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
1433         (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
1434         (d10v_write_fp, d10v_read_fp): Add prototypes.
1435         * symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
1436         * symfile.c (simple_overlay_update, simple_overlay_update_1):
1437         Ignore the size of overlay sections.  This check is redundant anyway.
1438         * printcmd.c (print_frame_args): Ditto.
1439         * valops.c (value_fetch_lazy): Ditto.
1440         * values.c (unpack_long): Ditto.
1441         * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
1442         d10v_init_extra_frame_info): Fix some minor bugs so the finish command
1443         works properly.
1444         (show_regs): Change num1 and num2 types from "long long" to "LONGEST".
1445         (d10v_read_fp, d10v_write_fp): New functions.
1446         (d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
1447         (d10v_push_arguments): Fix for pointers and structs.
1448         (d10v_extract_return_value): Fix for pointers and chars.
1449
1450 Tue Jan 20 18:53:18 1998  Stan Shebs  <shebs@andros.cygnus.com>
1451
1452         * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
1453         recognition, no source files for these (note that the i386 Mach
1454         config is for pre-Mach 3).
1455         (mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
1456         * config/mips/mipsel64.mt: Remove, never referenced.
1457
1458 Mon Jan 19 14:01:28 1998  Stan Shebs  <shebs@andros.cygnus.com>
1459
1460         * top.c (print_gdb_version): Restore to original message.
1461
1462 Mon Jan 19 13:34:40 1998  Ian Lance Taylor  <ian@cygnus.com>
1463
1464         From cgf@bbc.com (Chris Faylor):
1465         * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
1466         let the child exit.
1467         (child_kill_inferior): Respond to all debug events as the child is
1468         terminating.
1469
1470         * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
1471         (uninstall): Add $(EXEEXT) to file name to remove.
1472         (gdb$(EXEEXT)): Rename target from plain gdb.
1473         (gdb1$(EXEEXT)): Rename target from plain gdb1.
1474         (clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
1475
1476 1998-01-16  Felix Lee  <flee@cygnus.com>
1477
1478         * top.c (print_gdb_version): delete stutter.
1479
1480 Thu Jan 15 12:29:13 1998  Nick Clifton  <nickc@cygnus.com>
1481
1482         * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
1483         to prevent spurous error messages on non-ICE targets.
1484
1485 Wed Jan 14 19:27:02 1998  Stan Shebs  <shebs@andros.cygnus.com>
1486
1487         * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
1488         Remove, no longer used.
1489
1490 start-sanitize-d30v
1491 Wed Jan 14 18:11:26 1998  Michael Meissner  <meissner@cygnus.com>
1492
1493         Patch from Jim Wilson.
1494         * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
1495         declare void function before use.
1496
1497         * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
1498
1499 end-sanitize-d30v
1500 Tue Jan 13 16:38:48 1998  Fred Fish  <fnf@cygnus.com>
1501
1502         * configure.in (--with-mmalloc): Add new configure arg to use the
1503         mmalloc package.  Default is to not use it.
1504         (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
1505         the string "2".
1506         * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
1507         * configure: Regenerated.
1508         * config.in: Regenerated.
1509         * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
1510         (MMALLOC): Set using configure.
1511         (MMALLOC_CFLAGS): Set using configure.
1512
1513         * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
1514         than just defining it.
1515         * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
1516         * utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
1517         * objfiles.c: ditto.
1518         * defs.h: ditto.
1519
1520         * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
1521         * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
1522         * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
1523         * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
1524         * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
1525         * gdbserver/Makefile.in (MMALLOC_*): Remove.
1526         * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1527         * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1528         * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1529         * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1530         * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1531         * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1532         * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1533         * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1534         * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
1535         * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1536         * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1537         * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1538         * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1539         * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1540
1541 Mon Jan 12 11:46:51 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
1542
1543         * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
1544         default to void pointer type (so that their default radix is hex).
1545
1546         * symtab.c: move rbreak_command from no_class to class_breakpoint
1547         so it will be listed under "help breakpoints".
1548
1549 Sat Jan 10 14:58:04 1998  Stan Shebs  <shebs@andros.cygnus.com>
1550
1551         * rdi-share/hostchan.c: Remove gettimeofday declaration.
1552
1553 Thu Jan  8 11:03:59 1998  Nick Clifton  <nickc@cygnus.com>
1554
1555         * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
1556         to implement the Angel remote debugging interface.
1557
1558         * Makefile.in: Add build rules for remote-rdi.c and
1559         rdi-share/libangsd.a.
1560
1561         * configure.tgt: Updated from source on branch.
1562         * config/arm/tm-arm.h: Updated from source on branch.
1563         * arm-tdep.c: Updated from source on branch.
1564
1565         * rdi-share: New directory, RDI library contributed by ARM.
1566
1567 Mon Jan  5 20:21:59 1998  Mark Alexander  <marka@cygnus.com>
1568
1569         * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
1570         * monitor.c (monitor_wait): Echo program output.
1571         * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
1572         add MO_PRINT_PROGRAM_OUTPUT flag.
1573
1574 Mon Jan  5 18:21:11 1998  David Taylor  <taylor@texas.cygnus.com>
1575
1576         * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
1577         SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
1578         defined.
1579         * top.c (return_to_top_level, catch_errors): use the new macros
1580         * main.c (SET_TOP_LEVEL): ditto.
1581         * config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
1582
1583 Fri Jan  2 18:48:58 1998  Mark Alexander  <marka@cygnus.com>
1584
1585         * configure.in: Double up brackets in shell case pattern.
1586
1587 Fri Jan  2 17:06:05 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
1588
1589         * tracepoint.c (finish_tfind_command): improved algorithm for
1590         deciding when we've "stepped" into a new stack frame.
1591         (map_args_over_tracepoints): loop over tracepoint list "safely",
1592         since list elements may be deleted during loop.
1593         (read_actions): add actions to history list.
1594
1595 For older changes see ChangeLog-97
1596 \f
1597 Local Variables:
1598 mode: indented-text
1599 left-margin: 8
1600 fill-column: 74
1601 version-control: never
1602 End: