1 Wed May 14 08:58:55 1997 Jeffrey A Law (law@cygnus.com)
3 * mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments
4 to reflect current reality. Gross attempt at handling out of
7 * mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug
8 symbols to find the end of the prologue.
9 * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
12 Wed May 14 12:04:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
14 * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.
18 Mon May 12 11:35:04 1997 Mark Alexander <marka@cygnus.com>
20 * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
21 basic C80 features working.
24 Thu May 8 08:42:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
26 * configure.in (AC_TYPE_SIGNAL): Add
27 * configure: Re-generate.
28 * remote-sim.c: Signal returns RETSIGTYPE.
31 Wed May 7 19:10:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
33 * gdbtk.c (wrapped_call): New function - make actual call to tk
35 (call_wrapper): Rewrite to use top.c:catch_errors.
37 * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
41 Wed May 7 20:05:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
43 * target.h (target_stop): Drop argument so it can be tested for
46 Sat May 3 20:51:48 1997 Mark Alexander <marka@cygnus.com>
48 * utils.c (floatformat_from_doublest): Handle infinity properly.
50 Thu May 1 11:44:46 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
52 * Finalize merge from Hurd folk.
53 Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
54 * thread.c (thread_apply_command, thread_apply_all_command,
55 thread_command): Make sure TP is alive.
56 (thread_alive): New function.
57 Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
58 * infrun.c (sig_print_info): Deal better with long signal names.
59 Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
60 * thread.c (thread_id_to_pid): New function.
61 Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
62 * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
63 set_thread_default_cmd_list, show_thread_default_cmd_list):
64 New variables. (set_thread_cmd, show_thread_cmd,
65 set_thread_default_cmd, show_thread_default_cmd): New functions.
66 Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
67 * gnu-nat.c (inf_startup): remove TASK parameter.
68 (inf_set_task): replace with new function (inf_set_pid).
69 * gdbthread.h: Add extern decl for thread_cmd_list.
71 Thu May 1 02:28:21 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
73 * printcmd.c (disassemble_command): Adjust low function bound
74 by FUNCTION_START_OFFSET.
77 Wed Apr 30 15:23:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
79 * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
82 Mon Apr 28 21:25:32 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
84 * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
85 * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
86 in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
87 satisfy symbol dependancy in solib.c (core_ops).
88 * target.[ch] conditionalize Mach-specific signals so that they
89 won't show up in non-Mach gdb's!
90 * thread.c: change name of static function "thread_switch" to
91 "switch_to_thread", to avoid conflict with Mach global symbol;
92 move thread_cmd_list to global scope so targets can add their
94 * infrun.c: sig_print_info: allow for long signal names.
95 * gnu-nat.[ch]: tidying up comments.
96 * gnu-nat.c: remove calls to prune_threads and renumber_threads;
97 gnu_wait must not return -1 when inferior exits;
98 attach_to_child will modify inferior_pid in a way that allows
99 fork_inferior to remain unchanged; remove extra arg from
100 startup_inferior; move Mach thread commands here from thread.c.
102 Mon Apr 28 18:21:20 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
104 * symtab.c: decode_line_1, replace the assignment to
105 values.sals[0].pc which I accidentally left out on 4/3/97.
107 Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
109 * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
111 * top.c: change "to enable to enable" to "to enable" in a couple
114 Mon Apr 28 09:01:59 1997 Mark Alexander <marka@cygnus.com>
116 * breakpoint.c (remove_breakpoint): Pass correct type to
117 target_remove_watchpoint.
118 * target.h: Improve comment for target_{remove,insert}_breakpoint.
120 Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
122 * alpha-tdep.c (heuristic_proc_desc): Increase search limit
123 for return address register, handle `ret' instruction.
125 * corelow.c (get_core_registers): Initialize cf.
127 * procfs.c: Minor changes to make pre-ANSI compilers happy.
128 (procfs_notice_signals): Copy traced signal set back to
130 (unconditionally_kill_inferior): If PR_DEAD is defined,
131 rerun inferior after killing it.
133 Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com)
135 * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
136 structure value address is found in $a0 now.
137 * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
139 Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com)
141 * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
143 (EXTRACT_RETURN_VALUE): Likewise.
145 * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
146 insn at "pc", not "fi->pc".
149 Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
151 * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
152 (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
153 MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
154 (NPC_REGNUM): Tic80 has a delay slot.
155 (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
159 Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
161 * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
163 (EXTRACT_RETURN_VALUE): Likewise.
165 Tue Apr 22 11:58:15 1997 Fred Fish <fnf@cygnus.com>
167 * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
168 floatformat_ieee_double_littlebyte_bigword for little endian
170 * utils.c (floatformat_to_doublest): Create local preswapped
171 copy of input for floatformat_littlebyte_bigword formats.
172 (get_field, put_field): Treat floatformat_littlebyte_bigword
173 the same as floatformat_little.
174 (floatformat_from_doublest): Postswap output words for
175 the floatformat_littlebyte_bigwords format.
178 Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
180 * config/tic80/tic80.mt (SIM): Link in simulator.
183 Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
185 * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
186 config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
187 vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
188 aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
192 Remove -lm. That's now handled by configure.
194 * Makefile.in (maintainer-clean): Add distclean to dependencies.
195 Remove duplicate rm's of files.
198 Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
200 * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
203 Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
205 * remote-pa.c: Remove. It's broken and no longer necessary.
207 Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
209 * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
210 (Avoids name clash with broken AIX header files.)
212 Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
214 * serial.c (serial_log_command): Fix fputs_unfiltered calls.
216 * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
217 (DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
218 * xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
220 * exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
221 tstart and dstart with section VMA.
222 * rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
224 (vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
225 of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
226 (vmap_exec): Relocate relative to the VMA in the object file,
227 relocate .bss section as well.
228 (xcoff_relocate_core): No longer adjust section addresses by VMA.
229 * rs6000-tdep.c (find_toc_address): Change type of tocbase
231 * xcoffread.c (secnum_to_bfd_section): New routine to get
232 BFD section from CS section number.
233 (scan_xcoff_symtab): Make toc_offset section relative.
235 * symtab.c (total_number_of_methods): Avoid core dump if
236 baseclass type is still undefined.
238 Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com)
240 * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
242 * defs.h utils.c (error warning): Make message be const.
243 * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
244 to hook. Otherwise send it to fputs.
245 * monitor.c monitor.h (monitor_get_dev_name): New function. Does
247 * remote-e7000.c: Remove debugify stuff. Change printf, fprintf
248 to _filtered forms to make output appear in GUIs. Replace all
249 uses of SERIAL_READCHAR with readchar, which has better error
251 * (e7000_parse_device): Add prototype.
252 (readchar): Improve doc. Handle random serial errors.
253 (expect): Disable notice_quit code. It's busted. Remove
254 serial error handling (it's now handled in readchar). Remove
255 remote_debug echoing. That's handled in readchar as well.
256 (e7000_parse_device): Remove serial_flag arg. It's not
258 (e7000_open): Split into two pieces. Second part is
259 e7000_start_remote, and is error protected. Now, when we connect
260 to the target, we setup the initial frame and registers so that
261 the user gets an immediate indication of where the target is.
262 (gch): Remove debug output. That's handled by readchar.
263 (e7000_read_inferior_memory): Handle errors better.
264 (_initialize_remote_e7000): Get rid of `<xxx>' things from
265 command names. They show up when doing completion and confuse
267 * ser-e7kpc.c: Get rid of the DLL's since we can access the device
268 directly from Win32s and Win95. Get rid of debugify crud.
269 * serial.c: Remove debugify cruft.
270 * (serial_logchar serial_log_command serial_write serial_readchar
271 serial_send_break serial_close): Merge common functionality into
272 serial_logchar. Clean up rest of routines.
273 * sparclet-rom.c: Disembowel. Leave only download routine.
274 Download routine now switches to remote target automatically.
275 * top.c (disconnect): Only define if SIGHUP is defined. Cleans
276 up MSVC/Win32 problem.
277 * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
279 * config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
280 * config/sparc/tm-sparclet.h: Remove override for prompt.
282 Fri Apr 18 13:38:19 1997 Doug Evans <dje@canuck.cygnus.com>
284 * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
285 TARGET_BYTE ORDER_SELECTABLE.
287 Fri Apr 18 16:52:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
289 * remote-sim.c (init_callbacks): Initialize poll_quit and magic
290 fields of gdb_callback.
291 (gdbsim_stop): Add gdbsim_stop to list of supported client
293 (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
294 sim_wait where gdb is in a position to handle a long running
296 (gdbsim_cntrl_c): New function. Wrap the sim_resume call in a
298 (gdb_os_poll_quit): New function. Check for a quit pending on the
302 Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
304 * Makefile.in (install-only): Make list of gdbtcl files to install
305 explicit - was picking up files such as ChangeLog etc.
306 (install-only): Don't blindly create the directory.
309 Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
311 * defs.h (enum language): Add language_java.
312 * java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
313 * Makefile.in: Update for new files.
314 * objfiles.c (allocate_objfile): Allow NULL bfd argument.
315 * symfile.c (deduce_language_from_filename): Recognize .java.
317 Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
319 * m32r-stub.c (stash_registers): Rewrite.
320 (restore_registers): Renamed to restore_and_return.
321 (cleanup_stash): New function.
322 (process_exception): New function.
323 (_catchException*): Rewrite.
325 * remote-sim.c (gdbsim_load): Update call to sim_load.
326 (gdbsim_create_inferior): No longer pass start_address to
328 (gdbsim_open): Pass endian indicator as arg.
330 Tue Apr 15 15:31:09 1997 Stan Shebs <shebs@andros.cygnus.com>
332 * remote.c (get_offsets): Don't use scanf for interpreting
333 response to qOffsets.
335 Tue Apr 15 14:51:04 1997 Ian Lance Taylor <ian@cygnus.com>
337 * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
338 (INSTALL_XFORM1): Remove.
339 (install-only): Use $(program_transform_name) directly, rather
340 than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
341 (uninstall): Transform name.
343 Mon Apr 14 17:06:27 1997 Mark Alexander <marka@cygnus.com>
345 * remote-mips.c (mips_load): Ensure that PC gets updated
346 after a load on LSI target.
348 Mon Apr 14 15:54:51 1997 Geoffrey Noer <noer@pizza.cygnus.com>
350 * procfs.c (notice_signals): fix typo
352 Mon Apr 14 16:25:10 1997 Ian Lance Taylor <ian@cygnus.com>
354 * gdbserver/Makefile.in (INSTALL): Change install.sh to
357 Mon Apr 14 11:55:27 1997 Geoffrey Noer <noer@pizza.cygnus.com>
359 * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
360 since gcc automatically includes it
362 Thu Apr 10 13:20:53 1997 Geoffrey Noer <noer@cygnus.com>
364 * procfs.c: Substantial (but incomplete) changes to support
365 sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
366 struct now has substructs like struct flt_ctl instead of
367 just a fltset_t and has a ctl_fd, status_fd, as_fd, and
368 map_fd instead of a single fd. Non-sysv4.2mp procfs models
369 still have the structs and multiple fds, but don't use the
370 entire struct and the four fds all point to the same thing.
371 We use PROCFS_USE_READ_WRITE to decide whether to talk to
372 procfs with reads/writes or use ioctl instead. We use
373 HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
374 multiple fds or not. PROC_NAME_FMT is split out into
375 CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
376 STATUS_PROC_NAME_FMT.
378 (procfs_notice_signals): now a necessary wrapper around
379 (notice_signals): which are the new guts for noticing signals
380 (open_proc_file): gets a new flag arg used in sysv4.2mp to
381 determine whether or not to attempt to open the ctl_fd.
382 (procfs_read_status): new local function, reads procfs status
383 (procfs_write_pcwstop): new local function, writes a PCWSTOP
384 (procfs_write_pckill): new local function, writes a PCKILL
385 (unconditionally_kill_inferior): remove signo since we now
386 just call procfs_write_pckill().
387 (procfs_xfer_memory): call lseek with SEEK_SET rather than 0
388 (proc_iterate_over_mappings): the whole function is ifdefed
389 on UNIXWARE to keep things readable.
391 Expanded the syscall_table to include new potential sysv4.2mp
392 members. Note that all ifdefs of UNIXWARE should be eliminated
393 if possible or renamed to describe what's being selected for a
394 bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
395 IRIX specific code now also checks it's not UNIXWARE.
397 * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
398 HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
399 * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
400 "/debug/%d" as PROC_NAME_FMT used to be
402 Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com)
404 * mn10300-tdep.c: Almost completely rewritten based on mn10200
406 * config/mn10300/tm-mn10300.h: Likewise.
408 Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com)
410 * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove
411 remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a
412 lousy out-of-date clone of remote.c.
414 Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com)
416 * remote.c: Fix problems realized while showering.
417 * (hexnumlen): Add prototype. Use max, not min.
418 * (remote_write_bytes remote_read_bytes): Fix max packet size
419 calculations to properly account for packet overhead. Also handle
420 (probably rare) case where remote_register_buf_size isn't set.
422 * remote.c: Fix doc for `C' and `S' commands to indicate full
424 * (remote_ops extended_remote_ops remote_desc remote_write_size):
426 * (remote_fetch_registers remote_write_bytes remote_read_bytes):
427 Record size of response to fetch registers command, use this to
428 limit size of memory read and write commands.
429 * (push_remote_target): New function to make it possible to have
430 another target switch to the remote target.
431 * target.h: Add prototype for push_remote_target.
432 * sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
433 for hosts which default to unsigned chars (such as SGI's).
434 * (_initialize_sh_tdep): Don't set remote_write_size. It's now
435 handled automatically in remote.c.
437 Thu Apr 3 15:10:30 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
439 * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
440 find_pc_sect_function(), find_pc_sect_partial_function(): new
441 functions for debugging overlays; pc without section is ambiguous.
442 * breakpoint.[ch]: add section pointer to breakpoint struct;
443 add section argument to check_duplicates(); check section as well
444 as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
445 breakpoint_thread_match(), bpstat_stop_status()];
446 add section argument to describe_other_breakpoints();
447 use INIT_SAL() macro to zero-out new sal structures;
448 make resolve_sal_pc() fix up the sal's section as well as its pc;
449 match on section + pc in clear_command() and delete_breakpoint();
450 account for overlay sections in insert_breakpoints(),
451 remove_breakpoint() and breakpoint_re_set_one();
452 all this to support overlays where a PC is not unique.
453 * exec.c: change xfer_memory() to handle overlay sections.
454 * findvar.c: change read_var_value() to handle overlay sections.
455 * frame.h: declaration for block_for_pc_sect() [blockframe.c].
456 * infcmd.c: jump_command() warns against jumping into an overlay
457 that's not in memory. Also use INIT_SAL() to initialize sals.
458 * infrun.c: wait_for_inferior() sets a flag to invalidate cached
459 overlay state information; Also use INIT_SAL() to init sals.
460 * m32r-rom.c: modify load routines to use LMA instead of VMA.
461 * m32r-stub.c: mask exit value down to 8 bits; screen out any
462 memory read/writes in the range 600000 to a00000, and ff680000
463 to ff800000 (hangs because nothing is mapped there); fix strcpy().
464 * maint.c: maintenance command "translate-address" supports overlays.
465 * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
466 * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
467 this constitutes gdb's internal overlay mapping table. Add macro
468 ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
469 Add function find_pc_sect_section().
470 * printcmd.c: modify print_address_symbolic() with overlay smarts;
471 modify address_info() with overlay smarts; add function sym_info()
472 to support the INFO SYMBOL command (translate address to symbol(s));
473 modify disassemble_command() to work on unmapped overlays.
474 * source.c: use INIT_SAL() to initialize sals.
475 * symfile.[ch]: change generic_load() to use section's LMA address
476 instead of VMA address, for overlay sections.
477 Add numerous functions for finding a PC's section / overlay,
478 translating between VMA and LMA address ranges, determining if an
479 overlay section is mapped, etc. Add several user commands for
480 overlay debugging. Add support for a "generic" form of automatically
481 reading overlay mapping info from the inferior (based on the default
482 (simple) overlay manager which Cygnus provides as an example).
483 * symtab.[ch]: add functions find_pc_sect_symtab(),
484 find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
485 for lookup; modify lookup_symbol and decode_line_1() to use them;
486 modify find_function_start_sal() to account for overlay sections;
487 add macro INIT_SAL() for initializing struct symtab_and_line.
488 * target.c: fix a comment in the declaration of target_ops.
490 Thu Apr 3 10:31:12 1997 Mark Alexander <marka@cygnus.com>
492 * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
493 mips_skip_stub, mips_ignore_helper): New functions for dealing
494 with MIPS16 call/return thunks.
495 (mips_init_frame_pc_first): New function to implement
496 INIT_FRAME_PC_FIRST macro; includes code from old macro plus
497 new code to skip over MIPS16 thunks.
498 (mips_frame_chain): Skip over MIPS16 thunks.
499 * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
500 mips_skip_stub, mips_ignore_helper): Declare.
501 (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
502 SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
504 (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
505 (mips_init_frame_pc): Declare.
506 * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
507 to decide if certain library function calls should be ignored.
509 Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
511 * remote-sim.c (gdbsim_open): Check return code from sim_open.
512 Update call to sim_open (new arg SIM_OPEN_DEBUG).
515 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
517 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
521 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
523 * gdbinit.in: New file.
525 * configure.in: Generate .gdbinit from gdbinit.in.
526 * configure: Rebuild.
529 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
531 * config/tic80/tic80.mt: Disable using the simulator
535 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
537 * COPYING: Install new version of file from FSF.
538 * copying.c (show_copying_command): Update FSF address.
540 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
542 * Makefile.in (distclean): Remove .gdbinit.
545 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
547 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
550 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
552 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
553 to va_list from void *, since va_list might not be a pointer
557 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
559 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
560 default, not $(srcdir).
563 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
565 * remote-mips.c: Clean up comment and extraneous semicolon
566 for mips_monitor_prompt variable.
568 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
570 * remote-mips.c: Add `set monitor-prompt' command.
572 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
574 Fix from Peter Schauer:
575 * mdebugread.c (parse_procedure): Set address of procedure to
576 block start; this fixes problems with shared libraries introduced
579 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
581 * symtab.c (find_pc_symtab): change to support the case
582 where the objfile is reordered and contains both coff and
583 stabs debugging info (continue on if a psymtab isn't found).
585 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
587 Fixes from Peter Schauer:
588 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
589 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
590 is big-endian and if registers are 32 bits.
591 * mips-tdep.c (mips_print_register, mips_extract_return_value,
592 mips_store_return_value): Fix floating-point word-order problems on
593 little-endian targets introduced by changes of Mar 21.
595 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
597 * remote.c (target_resume_hook, target_wait_loop_hook): New
599 (remote_resume, remote_wait): Use them.
600 * d10v-tdep.c: Set the above hooks.
601 (tracesource): New GDB variable, controls source display in
603 (display_trace): Find and display source line if requested.
604 (trace_info): Mention empty trace buffer if appropriate.
605 (tdisassemble_command): Robustify argument handling.
607 * configure.host: Remove extra bogus Linux case.
609 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
611 * remote-sim.c (simulator_command): Add comment about dealing with
614 * Makefile.in (tic80-tdep.o): Add target.
615 * configure.tgt: Add tic80 case.
616 * tic80-tdep.c: New file.
617 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
620 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
622 * c-exp.y (yylex): Handle nested template parameter lists.
623 * symtab.c (decode_line_2): Fix test for valid choice number.
625 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
627 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
628 copy first two floating point arguments to general registers, so that
629 MIPS16 functions will receive the arguments correctly.
630 (mips_print_register): Print double registers correctly on
632 (mips_extract_return_value): Return double values correctly
633 on little-endian hosts.
635 * mdebugread.c (parse_procedure): Adjust address of procedure relative
636 to address in file descriptor record; this accounts for constant
637 strings that may precede functions in the text section. Remove
638 now-useless lowest_pdr_addr from argument list and all calls.
640 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
642 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
643 whether the simulator will be built by whether the Makefile in the
644 simulator directory was built.
646 * configure.in (--enable-sim-powerpc): Delete switch.
647 * configure: Regenerate.
649 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
651 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
654 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
656 (gdb_os_evprintf_filtered): Similarly.
658 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
660 New UnixWare 2.1 configuration
661 * config/i386/i386v42mp.mt: new
662 * config/i386/i386v42mp.mh: new
663 * config/i386/tm-i386v42mp.h: new
664 * config/i386/nm-i386v42mp.h: new
665 * configure.tgt: added new entries
666 * configure.host: added new entries
669 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
671 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
673 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
674 to GDBTK_LIBRARY, which is now a path to search.
675 (gdb_path_conv): New function. Convert Cygwin32 pathname to
678 * {aclocal.m4,configure.in}: Changes for Windows builds.
680 * configure: Rebuilt.
683 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
685 * dsrec.c (load_srec): Print leading zeroes when printing section
688 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
690 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
692 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
694 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
696 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
697 vprintf_filtered, evprintf_filtered): Callbacks that accept
700 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
702 * breakpoint.c (insert_breakpoints, watchpoint_check,
703 bpstat_stop_status): Do not disable watchpoints going out of scope.
704 (insert_breakpoints): Make sure that the current frame is valid
705 before calling find_frame_addr_in_frame_chain.
707 * top.c (setup_user_args): Handle quotes and backslashes.
708 (print_gdb_version): Update copyright year.
710 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
712 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
715 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
717 * configure: Regenerated.
718 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
721 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
723 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
725 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
726 except under wingdb. (Contributed by Martin Hunt).
728 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
730 * configure: Regenerated.
731 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
733 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
735 * remote-sim.h (sim_state, SIM_DESC): New types.
736 (sim_open): Return a `descriptor' as result.
737 (*): New argument of descriptor result from sim_open.
738 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
739 (gdbsim_open): Record result of sim_open in gdbsim_desc.
740 Pass argv list to sim_open, argv[0] = pseudo program name.
741 (*): Pass gdbsim_desc to sim_foo fns.
743 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
745 * config.in: Regenerated.
747 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
748 HAVE_HPUX_THREAD_SUPPORT): Define.
751 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
753 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
756 * configure: Regenerated.
757 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
761 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
763 First cut at supporting simulators in gdbserver:
765 * configure, configure.in: Allow gdbserver to be configured
766 for cross-target environments.
767 * gdbserver/Makefile.in: Add simulator support.
768 * gdbserver/configure.in: Eliminate assumption that host == target.
769 Simplify using gdb/configure.tgt and gdb/configure.host.
770 Fix other minor configuration errors.
771 * gdbserver/low-sparc.c: Fix compile error.
772 * gdbserver/remote-utils.c: Eliminate assumption that registers
773 and addresses are four bytes. Fix minor compile errors and warnings.
774 * gdbserver/server.c: Rewrite numerous instances of identical code
775 for starting inferior processes to call new function start_inferior.
776 Eliminate assumption that registers and addresses are four bytes.
777 * gdbserver/server.h: Add missing prototypes to eliminate compiler
779 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
780 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
781 * config/i386/linux.mh: Eliminate gdbserver support as a first step
782 in moving such support from host to target makefile fragments.
783 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
785 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
787 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
788 to insure consistant initialization of unused fields to zero.
789 * symtab.c: replace initializations of sals with new macro INIT_SAL.
790 * breakpoint.c: ditto.
793 * source.c: add call to INIT_SAL macro.
795 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
797 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
798 they might get used on 32 bit targets as well.
800 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
802 * remote-mips.c (mips_exit_debug): Some IDT boards don't
803 send the full exit string.
805 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
807 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
809 (mn10200_store_struct_return): Likewise.
811 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
813 * mips-tdep.c (mips_fetch_instruction): New function; replace
814 common code throughout with calls to it.
815 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
816 correct saved addresses of $s0 and $s1.
817 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
818 instead of hardcoded 4.
819 (mips16_skip_prologue): Handle extended instructions correctly.
821 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
823 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
824 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
826 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
828 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
829 New macros for testing, setting, and clearing bit 0 of addresses.
830 Change numerous bits of code where bit 0 was being manipulated
833 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
835 * remote-mips.c: Put back the form feeds.
837 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
839 * remote-mips.c: Remove form feeds (^L) from source.
840 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
841 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
842 PMON after a continue; it causes target program misbehavior.
843 (mips_fetch_register): Don't fetch unsupported registers; this
844 cuts down on wasted serial traffic.
846 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
848 * configure.in configure (HPUX/OSF thread support): Enable this
849 only when running GCC, since HP's thread header files use ANSI C
850 which is not supported by their default compiler.
852 * configure.host (i[3456]86-*-windows): Disable long long
853 support for WinGDB. Add mswin to configdirs.
854 * configure.in configure: Move calls to configure.host and
855 configure.tgt to the top of configure.in to allow them to set
856 config variables before they are referenced.
858 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
860 * configure.tgt (mips*-*-lnews*): New target.
862 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
864 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
865 if we're not the innermost frame. Fix minor typos.
867 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
869 * stabsread.c (read_type): Fix handling of template names
870 with template parameters containing `::'.
872 * valops.c (search_struct_field, search_struct_method):
873 Pass correct valaddr parameter to baseclass_offset.
874 Prevent gdb crashes by making sure that the virtual base pointer
875 from an user object still points to accessible memory.
877 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
879 * maint.c: Eliminate -Wall warnings by including some header files.
881 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
883 * remote-sim.c (init_callbacks): Undo previous change.
885 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
887 * maint.c: Fix dereference of pointer.
888 * remote-sim.c: Fix reference of structure member "last_error".
889 * debugify.c: Include config.h to get ANSI definitions.
891 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
893 * remote-vx.c (vx_attach): Remove code added by kung. It made no
896 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
898 * main.c (print_gdb_help): Make static to match declaration.
900 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
902 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
904 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
906 * debugify.c, debugify.h: Make safe for non-ansi compilers.
908 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
910 * defs.h: Fix prototypes for new cleanup functions.
912 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
914 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
915 comment, add PARAMS, add license info and fix indentation.
917 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
919 * debugify.c, debugify.h: New files. Provide common macros
920 for writing debug info to a log file or stdio.
922 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
924 * c-valprint.c (c_val_print): Fix printing for arrays defined
927 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
929 * defs.h: Fix cntl-C to read from the Windows message queue.
930 Add prototypes for make_final_cleanup (and the other cleanup
932 * remote-e7000.c: Fix sync code to timeout if unable to sync.
933 Change sync code to report status while trying to sync-up
934 with hardware. Add debugging output and document.
935 * ser-e7kpc.c: Swap order of len & offset to match implementation.
936 Add debugging output and document.
937 * serial.c: Add debugging output.
938 * top.c: Add call to do_final_cleanups.
939 Remove conditionals preventing Win32 from getting SIGQUIT.
940 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
941 chain as a parameter. Extract this generic code from the cleanup
942 routines into separate funtions (*_my_cleanup). Keep old
943 functionality by passing "cleanup_chain" to the new funtions.
944 Define the cleanup chain "final_cleanup_chain" to be a cleanup
945 chain which will be executed only when gdb exits. Add functions
946 (*_final_cleanup) to match the original (*_cleanup) functions.
947 (pollquit, quit, notice_quit): Fix to read cntl-C from the
948 Windows message queue.
950 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
952 * m32r-rom.c: #include <sys/types.h>.
953 #ifdef out new load support if wingdb.
954 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
956 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
959 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
960 * mn10200-tdep.c (mn10200_store_struct_return): New function.
962 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
963 extracting a return value from a register pair.
965 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
966 be two byte aligned. Round argument sizes up to two byte boundary.
967 Write out args in two byte hunks.
968 (mn10200_push_return_address): Implement.
969 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
970 structures > 8 bytes (temporary).
971 (STORE_RETURN_VALUE): Likewise.
972 (CALL_DUMMY): No longer undefine.
973 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
974 (REG_STRUCT_HAS_ADDR): Define.
977 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
979 * configure.tgt: added r5900.
982 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
984 * mips-tdep.c (non_heuristic_proc_desc): New function.
985 (find_proc_desc): Move non-heuristic proc search code into separate
987 (gdb_print_insn_mips): Use non-heuristic method to find procedure
988 descriptor, to avoid prologue examination when disassembling.
989 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
990 aka MicroMeteor board).
991 (mips_exit_debug): Prevent protocol reinitialization if an error
992 occurs while exiting debug mode.
994 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
996 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
997 comments, formatting, etc. Plus other minor fixes for problems
998 I found during my first pass over the mn10200 port.
999 (mn10200_analyze_prologue): New function.
1000 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
1001 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
1002 comments, formatting, etc. Minor fixes for problems I found during
1003 my first pass over the mn10200 port.
1004 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
1006 (REGISTER_VIRTUAL_TYPE): Define as a long.
1007 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
1009 (STORE_RETURN_VALUE): Similarly.
1011 * blockframe.c (generic_get_saved_regs): Remove unused variable
1013 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
1014 inside #ifdef CALL_DUMMY.
1015 (watch_command_1): Initialize target_resources_ok.
1016 * command.c (do_setshow_command): Provide dummy initialization
1018 * valops.c (find_function_addr): Move function & prototype inside
1020 (value_arg_coerce): Similarly.
1021 (value_of_variable): Provide dummy initialization of "frame".
1023 start-sanitize-gdbtk
1024 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
1026 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
1029 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
1031 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
1032 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
1034 (scan_xcoff_symtab): Ditto.
1036 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
1038 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
1039 from being sent to 32-bit targets by masking off upper bits.
1040 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
1041 of PC on 32-bit targets.
1042 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
1043 frame setup instruction.
1044 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
1045 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
1046 prologue instruction. Fix warnings and bugs found by gcc -Wall.
1047 * buildsym.c (finish_block): Improve handling of overlapping blocks;
1048 fixes problem on MIPS16 printing function arguments.
1050 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1052 * dwarf2read.c (dwarf2_linkage_name): New function to get
1053 the linkage name of a die from DW_AT_MIPS_linkage_name or
1055 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
1056 new_symbol): Use it instead of accessing DW_AT_name.
1057 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
1058 partial die if present.
1059 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
1061 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
1063 * blockframe.c (generic_frame_chain_valid): If the new frame
1064 is not INNER_THAN the old frame, then it's not valid.
1066 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
1068 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
1069 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
1071 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
1073 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
1074 sd and sw instructions correctly.
1075 (heuristic_proc_start): Add support for MIPS16.
1076 (mips16_get_imm, mips16_heuristic_proc_desc,
1077 mips32_heuristic_proc_desc): New helper functions for
1078 heuristic_proc_desc.
1079 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
1080 (mips_push_arguments): Don't align small arguments in EABI.
1081 (mips32_skip_prologue): Attempt to shrink code size a little.
1083 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1085 * m32r-stub.c: New -- remote protocol support for M32R cpu.
1086 * m32r-rom.c: Several experiments with improved download time.
1088 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
1090 * mips-tdep.c (MIPS16_INSTLEN): Define.
1091 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
1092 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
1093 of function on MIPS16.
1094 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
1095 for mips_skip_prologue.
1096 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
1098 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1100 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
1101 ../sim/common/libcommon.a.
1103 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1105 * blockframe.c: fix a null pointer ref in generic_get_saved_register
1107 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
1109 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
1112 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
1114 First set of changes for mips16:
1115 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
1116 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
1117 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
1118 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
1119 * mem-break.c (memory_breakpoint_from_pc): New function.
1120 (memory_insert_breakpoint, memory_remove_breakpoint): Use
1121 memory_breakpoint_from_pc to determine breakpoint contents and size.
1122 * target.h (memory_breakpoint_from_pc): Declare.
1123 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
1124 to determine size of breakpoint instruction.
1125 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
1126 New helper functions for mips_find_saved_regs.
1127 (mips_find_saved_regs): Recognize mips16 prologues.
1128 (mips_addr_bits_remove): Strip off upper 32 bits of address
1129 when target CPU is 32 bits but CORE_ADDR is 64 bits.
1130 (mips_step_skips_delay): No branch delay slot on mips16.
1131 (gdb_print_insn_mips): Disassemble mips16 code.
1132 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
1134 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
1136 * tm-mn10200.h (NUM_REGS): Decrease to 12.
1137 (REGISTER_NAMES): Elimination registers not found on the mn10200.
1138 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
1139 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
1141 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1143 * dwarf2read.c: Replace integral tag, name and form fields in
1144 internal structure definitions with the corresponding enumeration
1145 types from dwarf2.h. Add default cases to switches on enumerations
1147 Make quoting of string arguments in complaint messages consistent.
1148 Check for NULL returns from DW_STRING.
1149 (struct partial_die_info): Add sibling and has_type fields, remove
1151 (DW_*): Move access macro definitions near the definition of the
1152 attribute structure.
1153 (struct field_info): New structure to pass information about fields
1154 and member functions between die processing routines.
1155 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
1156 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
1157 the partial symbol table if the DW_AT_*_pc attributes are missing.
1158 Add file scope base type definitions to the partial symbol table.
1159 Skip over child dies if the die has a sibling attribute.
1160 (add_partial_symbol): Enter global variables with type attributes
1161 and without location descriptors into the partial symbol table.
1162 Store value of DW_TAG_variable dies in the partial symbol table.
1163 Do not enter global variables into the minimal symbol table.
1164 Add base type definitions to the partial symbol table.
1165 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
1166 (process_die): Move check for DW_AT_low_pc to read_func_scope.
1167 Add a typedef symbol for base type definitions to the symbol table.
1168 Ignore DW_TAG_inlined_subroutine tags for now.
1169 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
1170 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
1171 to determine pc bounds, ignore dies with invalid bounds.
1172 (dwarf2_get_pc_bounds): New routine to extract and validate the
1173 DW_AT_*_pc attributes of a die.
1174 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
1175 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
1176 New functions to handle fields and member functions.
1177 (read_structure_scope): Rewritten to use them.
1178 (read_array_type): Renamed from dwarf_read_array_type.
1179 Default upper array bound to describe an array with unspecified
1181 Create array types in backwards order, as dwarf2 puts out the array
1182 dimensions from left to right.
1183 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
1184 DW_AT_artificial and DW_AT_prototyped.
1185 (read_base_type): Make an unsigned type for DW_ATE_boolean.
1186 Pass objfile to dwarf_base_type.
1187 (read_partial_die): Use read_attribute to read in the attributes.
1188 Handle DW_AT_sibling and DW_AT_type.
1189 Follow references when determining DW_AT_name and DW_AT_external
1190 attributes of the die.
1191 Validate DW_AT_*_pc attributes.
1192 (read_full_die): Use read_attribute to read in the attributes.
1193 (read_attribute): New function to read an attribute described
1194 by an abbreviated attribute.
1195 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
1196 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
1197 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
1198 Change symbol class for global variables with a zero valued location
1199 descriptor to LOC_UNRESOLVED.
1200 Handle DW_AT_const_value attributes for DW_TAG_variable,
1201 DW_TAG_formal_parameter and DW_TAG_enumerator.
1202 Build a typedef symbol for DW_TAG_base_type.
1203 (dwarf2_const_value): New routine to copy a constant value from an
1204 attribute to a symbol.
1205 (dwarf_base_type): Use passed in objfile, not current_objfile
1206 when calling dwarf2_fundamental_type.
1207 (dump_die): Use DW_* accessor macros to access values of attributes.
1208 (decode_locdesc): Handle DW_OP_plus_uconst.
1210 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
1212 * mn10200-tdep.c: New file.
1213 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
1214 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
1215 * config/mn10200/mn10200.mt: New file.
1216 * configure.tgt: add mn10200 entry.
1218 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
1220 * configure.in configure: Check if host has libdl if doing
1223 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
1225 * mn10300-tdep.c: Wrote/fixed implementations of
1226 mn10300_frame_chain, mn10300_init_extra_frame_info,
1227 mn10300_frame_saved_pc
1228 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
1229 and INIT_FRAME_PC macros.
1231 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
1233 * configure.in configure: Check if host has libm. Make sure we
1234 are using gcc when using the -export-dynamic option. Fixes a
1235 problem with building under Solaris/SunPro cc.
1237 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
1239 * config/mips/{embed,embed64,embedl,embedl64}.mt:
1240 Link in simulator on MIPS embedded targets.
1242 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1244 * blockframe.c (frameless_look_for_prologue): Mark frames
1245 with a zero PC as frameless to improve backtraces from core dumps
1246 caused by dereferencing a NULL function pointer.
1248 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
1250 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
1252 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
1254 * mn10300-tdep.c: made a lot more generic, ripping out code
1255 from copied target (no more mn10300_scan_prologue,
1256 init_extra_frame_info, and mn10300_fix_call_dummy calls)
1257 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
1258 and INIT_FRAME_PC macros
1260 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1262 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
1263 FP_REGISTER_BYTES to compute offsets into the saved frame,
1264 since it fails for SPARC targets configured without any
1265 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
1267 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
1269 * symtab.c (fixup_symbol_section): Handle NULL symbols without
1272 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
1274 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
1275 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
1277 * configure configure.in: Clean up test cases around thread support.
1279 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
1282 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
1283 printcmd.c valops.c value.h values.c: Add bfd_section arg to
1284 value_at and value_at_lazy.
1285 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
1286 Add bfd_section arg to prim_record_minimal_symbol_and_info.
1287 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
1288 instead of read_memory. It takes a bfd_section arg.
1289 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
1290 unnecessary cast for assignment of struct dbx_symfile_info.
1291 Struct objfile now uses a real pointer instead of PTR for this
1293 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
1294 text, data and bss into dbx_symfile_info.
1295 * exec.c (xfer_memory): Handle transfers for user-specified
1297 * findvar.c (read_var_value locate_var_value): Copy bfd section
1298 from the symbol to the value.
1299 * gdb-stabs.h: Add section pointers for text, data and bss
1301 * maint.c (translate address command): Add test code for overlay
1302 address translation.
1303 * printcmd.c (do_examine do_one_display): Now takes a bfd section
1305 * (print_formatted x_command): Record current section along with
1306 current address for repeated commands.
1307 * sparc-nat.c (fetch_inferior_registers): Change
1308 target_xfer_memory to target_{read write}_memory to allow changes
1309 to target_xfer_memory interface for section info.
1310 * symmisc.c (dump_msymbols print_symbol): Print section
1311 assocaited with symbol.
1312 * symtab.c (fixup_symbol_section): New routine to
1313 add section info to symbols returned by lookup_symbol.
1314 * symtab.h (struct general_symbol_info): Add bfd section to
1316 * target.c target.h (target_xfer_memory): Add bfd section to
1318 * (target_read_memory_section): New routine to read data from a
1320 * (target_memory_bfd_section): New global variable to pass bfd
1321 section in to targets.
1322 * valarith.c (value_add value_addr value_array): Preserve bfd
1323 section when computing new value.
1324 * value.h (struct value): Add bfd section to values.
1325 * values.c (allocate_value value_copy): Initialize/preserve bfd
1327 * (unpack_double): Clean up _MSC_VER conditionals to remove
1330 * v850ice.c: New module to support communication with NEC's
1332 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
1333 ep names with rxx names. sp and fp are renamed via a different
1337 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
1339 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
1340 also removed code elsewhere that made use of RP_REGNUM.
1341 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
1342 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
1343 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
1344 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
1346 For older changes see ChangeLog-96
1352 version-control: never