1 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
3 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
4 offset to the stack parameter list for the ELFv2 ABI.
6 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
8 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
9 set_gdbarch_convert_from_func_ptr_addr and
10 set_gdbarch_elf_make_msymbol_special for ELFv1.
11 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
12 function descriptors on ELFv1.
13 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
14 set up r12 at function entry.
16 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
18 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
19 (struct gdbarch_tdep): New member elf_abi.
21 * rs6000-tdep.c: Include "elf/ppc64.h".
22 (rs6000_gdbarch_init): Detect ELF ABI version.
24 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
26 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
27 within a register pair holding a DFP 128-bit value on little-endian.
28 (ppc64_sysv_abi_return_value_base): Likewise.
29 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
30 (dfp_pseudo_register_write): Likewise.
32 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
34 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
35 offset on little-endian when passing _Decimal32.
36 (ppc64_sysv_abi_return_value_base): Likewise for return values.
38 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
40 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
41 of the overlapped FP register within the VSX register on little-
43 (efpr_pseudo_register_write): Likewise.
45 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
47 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
48 offset on little-endian when passing small structures.
50 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
52 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
53 (struct ppc64_sysv_argpos): New data structure.
54 (ppc64_sysv_abi_push_float): Remove.
55 (ppc64_sysv_abi_push_val): New function.
56 (ppc64_sysv_abi_push_integer): Likewise.
57 (ppc64_sysv_abi_push_freg): Likewise.
58 (ppc64_sysv_abi_push_vreg): Likewise.
59 (ppc64_sysv_abi_push_param): Likewise.
60 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
61 (ppc64_sysv_abi_return_value_base): New function.
62 (ppc64_sysv_abi_return_value): Refactor to use it.
64 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
66 * NEWS: Document new target powerpc64le-*-linux*.
68 2014-02-04 Mark Kettenis <kettenis@gnu.org>
70 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
71 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
73 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
74 register set used in ELF core dumps. Add floating-point register set.
76 2014-02-03 Kevin Buettner <kevinb@redhat.com>
78 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
79 dwarf2_to_gdb[] table using symbolic constants. Adjust
80 penultimate entry from number representing the PC register
81 to symbolic constant representing the MDR register. Add
82 constant for the PC register to the end of the table.
84 2014-02-03 Mark Kettenis <kettenis@gnu.org>
86 * bsd-kvm.c: Include <sys/param.h>
88 2014-02-03 Mark Kettenis <kettenis@gnu.org>
90 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
92 2014-01-31 Joel Brobecker <brobecker@adacore.com>
94 * ada-lang.h (clear_ada_sym_cache): Delete.
96 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
98 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
100 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
102 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
103 the sigreturn register save area only if the syscall is
106 2014-01-29 Joel Brobecker <brobecker@adacore.com>
108 * valops.c (value_slice): Minor reformatting.
110 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
112 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
114 2014-01-28 Joel Brobecker <brobecker@adacore.com>
116 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
118 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
119 (ada_ignore_descriptive_types_p): New static global.
120 (find_parallel_type_by_descriptive_type): Return immediately
121 if ada_ignore_descriptive_types_p is set.
122 (_initialize_ada_language): Register new commands "maintenance
123 set ada", "maintenance show ada", "maintenance set ada
124 ignore-descriptive-types" and "maintenance show ada
125 ignore-descriptive-types".
126 * NEWS: Add entry for new "maint ada set/show
127 ignore-descriptive-types" commands.
129 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
131 * record-btrace.c (record_btrace_close): Call btrace_teardown
134 2014-01-27 Joel Brobecker <brobecker@adacore.com>
136 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
139 2014-01-27 Joel Brobecker <brobecker@adacore.com>
141 * ada-typeprint (type_is_full_subrange_of_target_type):
143 (print_range): Add parameter bounds_prefered_p. If not set,
144 try printing range types using the name of their base type.
145 (print_range_type): Add parameter bounds_prefered_p.
146 Use it in call to print_range.
147 (print_array_type, ada_print_type): Update calls to print_range
148 and print_range_type.
150 2014-01-27 Joel Brobecker <brobecker@adacore.com>
152 * ada-typeprint.c (print_array_type, print_choices, print_range)
153 (print_range_bound, print_dynamic_range_bound, print_range_type):
156 2014-01-27 Joel Brobecker <brobecker@adacore.com>
158 * ada-typeprint.c (print_range): Add missing empty line
159 after local declaration.
161 2014-01-27 Joel Brobecker <brobecker@adacore.com>
163 * ada-valprint.c (print_optional_low_bound): Get index_type's
164 target type for as long as it is a TYPE_CODE_RANGE.
166 2014-01-27 Joel Brobecker <brobecker@adacore.com>
168 * procfs.c (procfs_make_note_section): Remove assertion and
171 2014-01-24 Yao Qi <yao@codesourcery.com>
173 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
174 * corelow.c (get_core_siginfo): Likewise.
176 2014-01-24 Yao Qi <yao@codesourcery.com>
178 * remote.c (remote_write_bytes_aux): Change type of 'len' to
179 ULONGEST. Don't check 'len' is negative.
180 (remote_write_bytes): Change type of 'len' to ULONGEST.
182 2014-01-23 Tom Tromey <tromey@redhat.com>
185 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
186 Handle exception from frame.block.
187 (FrameVars.fetch_frame_locals): Likewise.
189 2014-01-23 Tom Tromey <tromey@redhat.com>
192 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
193 on a NULL pointer. Move "goto error" to correct place.
195 2014-01-23 Tom Tromey <tromey@redhat.com>
198 * python/py-framefilter.c (apply_frame_filter): Call
199 ensure_python_env after computing gdbarch.
201 2014-01-23 Yao Qi <yao@codesourcery.com>
203 * target.c (raw_memory_xfer_partial): Change argument type
204 from void * to gdb_byte *.
205 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
207 2014-01-22 Doug Evans <dje@google.com>
209 New gdbserver option --debug-format=timestamp.
212 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
214 * syscalls/s390x-linux.xml: New file.
215 * syscalls/s390-linux.xml: New file.
216 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
217 (XML_SYSCALL_FILENAME_S390X): Likewise.
218 (op_svc): New enum value for SVC opcode.
219 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
220 (s390_linux_get_syscall_number): New function.
221 (s390_gdbarch_init): Register '*get_syscall_number' and the
222 syscall xml file name.
223 * data-directory/Makefile.in (SYSCALLS_FILES): Add
224 "s390-linux.xml" and "s390x-linux.xml".
225 * NEWS: Announce new feature.
227 2014-01-22 Baruch Siach <baruch@tkos.co.il>
229 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
231 2014-01-22 Pedro Alves <palves@redhat.com>
233 * xtensa-config.c: Include defs.h.
235 2014-01-22 Joel Brobecker <brobecker@adacore.com>
237 * common/common-utils.h: Add "ARI:" comment beside __func__
240 2014-01-22 Joel Brobecker <brobecker@adacore.com>
242 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
245 2014-01-21 Roland McGrath <mcgrathr@google.com>
247 * configure.ac: Call AM_PROG_INSTALL_STRIP.
248 * configure: Regenerate.
249 * aclocal.m4: Regenerate.
250 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
251 New substituted variables.
252 (install-strip): New target.
253 (INSTALL_SCRIPT): New substituted variable.
254 (FLAGS_TO_PASS): Add it.
255 (install-only): Use $(INSTALL_SCRIPT) rather than
256 $(INSTALL_PROGRAM) for gcore.
258 2014-01-20 Tom Tromey <tromey@redhat.com>
260 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
263 2014-01-20 Tom Tromey <tromey@redhat.com>
265 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
266 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
267 (deprecated_cmd_warning, complete_on_cmdlist): Update.
268 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
269 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
270 (struct cmd_list_element) <flags>: Remove.
271 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
272 doc_allocated>: New fields.
273 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
275 * maint.c (maintenance_do_deprecate): Update.
276 * top.c (execute_command): Update.
278 2014-01-20 Baruch Siach <baruch@tkos.co.il>
280 * xtensa-linux-nat.c: Include asm/ptrace.h.
282 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
284 * Makefile.in (SFILES): Add d-support.c.
285 (COMMON_OBS): Add d-support.o.
286 * d-lang.h (d_parse_symbol): Add comment, now defined in
288 * d-lang.c (parse_call_convention)
289 (parse_attributes, parse_function_types)
290 (parse_function_args, parse_type, parse_identifier)
291 (call_convention_p, d_parse_symbol): Move functions to ...
292 * d-support.c: ... New file.
294 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
296 * d-lang.h (d_parse_symbol): Add declaration.
297 * d-lang.c (extract_identifiers)
298 (extract_type_info): Remove functions.
299 (parse_call_convention, parse_attributes)
300 (parse_function_types, parse_function_args)
301 (parse_type, parse_identifier, call_convention_p)
302 (d_parse_symbol): New functions.
303 (d_demangle): Use d_parse_symbol to demangle D symbols.
305 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
307 * d-lang.h (struct builtin_d_type): New data type.
308 (builtin_d_type): Add declaration.
309 * d-lang.c (d_language_arch_info, build_d_types)
310 (builtin_d_type): New functions.
311 (enum d_primitive_types): New data type.
312 (d_language_defn): Change c_language_arch_info to
313 d_language_arch_info.
314 (d_type_data): New static variable.
315 (_initialize_d_language): Initialize d_type_data.
317 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
319 * d-lang.h (d_main_name): Add declaration.
320 * d-lang.c (d_main_name): New function.
321 * symtab.c (find_main_name): Add call to d_main_name.
323 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
325 * d-lang.c (d_language_defn): Change macro_expansion_c to
328 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
330 * MAINTAINERS: Add myself as a write-after-approval maintainer.
332 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
334 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
335 gdb_exception" declaration.
336 * remote.c (getpkt_or_notif_sane): Likewise.
338 2014-01-17 Doug Evans <dje@google.com>
340 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
341 function, contents of dirnames_to_char_ptr_vec_append moved here.
342 (delim_string_to_char_ptr_vec): New function.
343 (dirnames_to_char_ptr_vec_append): Rewrite.
344 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
346 2014-01-17 Doug Evans <dje@google.com>
348 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
350 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
351 #include "common-utils.h".
352 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
353 * common/vec.h (VEC_ASSERT_PASS): Update.
354 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
355 (MACH_CHECK_ERROR): Update.
357 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
359 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
361 * gdbarch.h: Regenerate.
363 2014-01-16 Tom Tromey <tromey@redhat.com>
365 * value.c (struct value) <regnum>: Move earlier.
367 2014-01-16 Tom Tromey <tromey@redhat.com>
369 * remote.c (extended_remote_create_inferior): Rename from
370 extended_remote_create_inferior_1. Add "ops" argument. Remove
373 2014-01-16 Pedro Alves <palves@redhat.com>
375 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
376 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
379 2014-01-16 Doug Evans <dje@google.com>
381 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
383 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
385 * btrace.h (btrace_thread_flag): New.
386 (struct btrace_thread_info) <flags>: New.
387 * record-btrace.c (record_btrace_resume_thread)
388 (record_btrace_find_thread_to_move, btrace_step_no_history)
389 (btrace_step_stopped, record_btrace_start_replaying)
390 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
391 (record_btrace_find_resume_thread): New.
392 (record_btrace_resume, record_btrace_wait): Extend.
393 (record_btrace_can_execute_reverse): New.
394 (record_btrace_open): Fail in non-stop mode.
395 (record_btrace_set_replay): Split into this, ...
396 (record_btrace_stop_replaying): ... this, ...
397 (record_btrace_clear_histories): ... and this.
398 (init_record_btrace_ops): Init to_can_execute_reverse.
401 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
403 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
404 (forward_target_decr_pc_after_break)
405 (target_decr_pc_after_break): New.
406 * target.c (forward_target_decr_pc_after_break)
407 (target_decr_pc_after_break): New.
408 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
409 instead of gdbarch_decr_pc_after_break.
410 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
411 instead of gdbarch_decr_pc_after_break.
412 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
413 instead of gdbarch_decr_pc_after_break.
414 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
415 instead of gdbarch_decr_pc_after_break.
416 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
417 instead of gdbarch_decr_pc_after_break.
418 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
419 instead of gdbarch_decr_pc_after_break.
421 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
423 * btrace.c: Include regcache.h.
424 (btrace_add_pc): New.
425 (btrace_enable): Call btrace_add_pc.
426 (btrace_is_empty): New.
427 * btrace.h (btrace_is_empty): New.
428 * record-btrace.c (require_btrace, record_btrace_info): Call
431 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
433 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
435 (linux_disable_btrace): Change return type.
436 * common/linux-btrace.h (linux_read_btrace): Change parameters
437 and return type to allow error reporting. Update users.
438 (linux_disable_btrace): Change return type. Update users.
439 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
442 (btrace_block) <begin>: Comment on BEGIN == 0.
443 * btrace.c (btrace_compute_ftrace): Start from the end of
445 (btrace_stitch_trace, btrace_clear_history): New.
446 (btrace_fetch): Read delta trace, return if replaying.
447 (btrace_clear): Move clear history code to btrace_clear_history.
448 (parse_xml_btrace): Throw an error if parsing failed.
449 * target.h (struct target_ops) <to_read_btrace>: Change parameters
450 and return type to allow error reporting.
451 (target_read_btrace): Change parameters and return type to allow
453 * target.c (target_read_btrace): Update.
454 * remote.c (remote_read_btrace): Support delta reads. Pass
458 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
460 * record.h (record_btrace_frame_unwind)
461 (record_btrace_tailcall_frame_unwind): New declarations.
462 * dwarf2-frame: Include record.h
463 (dwarf2_frame_cfa): Throw an error for btrace frames.
464 * record-btrace.c: Include hashtab.h.
465 (btrace_get_bfun_name): New.
466 (btrace_call_history): Call btrace_get_bfun_name.
467 (struct btrace_frame_cache): New.
469 (bfcache_hash, bfcache_eq, bfcache_new): New.
470 (btrace_get_frame_function): New.
471 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
472 (record_btrace_frame_this_id): Compute own id.
473 (record_btrace_frame_prev_register): Provide PC, throw_error
474 for all other registers.
475 (record_btrace_frame_sniffer): Detect btrace frames.
476 (record_btrace_tailcall_frame_sniffer): New.
477 (record_btrace_frame_dealloc_cache): New.
478 (record_btrace_frame_unwind): Add new functions.
479 (record_btrace_tailcall_frame_unwind): New.
480 (_initialize_record_btrace): Allocate cache.
481 * btrace.c (btrace_clear): Call reinit_frame_cache.
484 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
486 * record-btrace.c (record_btrace_set_replay)
487 (record_btrace_goto_begin, record_btrace_goto_end)
488 (record_btrace_goto): New.
489 (init_record_btrace_ops): Initialize them.
492 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
494 * record-btrace.c (record_btrace_find_new_threads)
495 (record_btrace_thread_alive): New.
496 (init_record_btrace_ops): Initialize to_find_new_threads and
499 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
501 * record-btrace.c (record_btrace_resume): New.
502 (record_btrace_wait): New.
503 (init_record_btrace_ops): Initialize to_wait and to_resume.
505 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
507 * record-btrace.c (record_btrace_xfer_partial)
508 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
509 (record_btrace_allow_memory_access): New.
510 (init_record_btrace_ops): Initialize new methods.
511 * target.c (raw_memory_xfer_partial): Bail out if target reports
512 that this memory is not available.
514 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
516 * target.h (target_ops) <to_insert_breakpoint>
517 <to_remove_breakpoint>: Add target_ops parameter.
518 (forward_target_insert_breakpoint): New.
519 (forward_target_remove_breakpoint): New.
520 (memory_remove_breakpoint, memory_insert_breakpoint):
521 Add target_ops parameter.
522 * target.c (target_insert_breakpoint): Split into this and ...
523 (forward_target_insert_breakpoint): ... this.
524 (target_remove_breakpoint): Split into this and ...
525 (forward_target_remove_breakpoint): ... this.
526 (debug_to_insert_breakpoint): Add target_ops parameter.
527 Call forward_target_insert_breakpoint.
528 (debug_to_remove_breakpoint): Add target_ops parameter.
529 Call forward_target_remove_breakpoint.
530 (update_current_target): Do not inherit or default to_insert_breakpoint
531 and to_remove_breakpoint.
532 * corelow.c (ignore): Add target_ops parameter.
533 * exec.c (ignore): Add target_ops parameter.
534 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
535 Add target_ops parameter.
536 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
537 Add target_ops parameter.
538 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
539 Add target_ops parameter.
540 * record-full.c (record_full_beneath_to_insert_breakpoint)
541 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
542 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
543 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
544 (record_full_core_remove_breakpoint): Add target_ops parameter.
546 (record_full_beneath_to_insert_breakpoint_ops)
547 (record_full_beneath_to_remove_breakpoint_ops)
548 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
549 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
550 tmp_to_remove_breakpoint_ops,
551 record_full_beneath_to_insert_breakpoint_ops, and
552 record_full_beneath_to_remove_breakpoint_ops.
553 * remote-m32r-sdi.c (m32r_insert_breakpoint)
554 (m32r_remove_breakpoint): Add target_ops parameter.
555 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
556 Add target_ops parameter.
557 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
558 Add target_ops parameter.
560 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
561 Markus Metzger <markus.t.metzger@intel.com>
563 * record-btrace.c: Include frame-unwind.h.
564 (record_btrace_frame_unwind_stop_reason)
565 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
566 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
568 (init_record_btrace_ops): Install it.
570 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
572 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
575 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
577 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
580 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
582 * frame-unwind.c: Include target.h.
583 (frame_unwind_try_unwinder): New function with code from ...
584 (frame_unwind_find_by_frame): ... here. New variable
585 unwinder_from_target, call also target_get_unwinder)
586 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
587 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
588 * target.h (struct target_ops): New fields to_get_unwinder and
589 to_get_tailcall_unwinder.
590 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
592 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
594 * record-btrace.c (record_btrace_fetch_registers)
595 (record_btrace_store_registers)
596 (record_btrace_to_prepare_to_store): New.
597 (init_record_btrace_ops): Add the above.
599 2014-01-16 Tom Tromey <tromey@redhat.com>
601 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
602 * target.h (struct target_ops) <to_prepare_to_store>: Add
604 (target_prepare_to_store): Add argument.
605 * target.c (debug_to_prepare_to_store): Add argument.
606 (update_current_target): Update.
607 * remote.c (remote_prepare_to_store): Add 'self' argument.
608 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
609 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
610 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
611 * record-full.c (record_full_core_prepare_to_store): Add 'self'
613 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
614 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
615 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
616 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
617 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
619 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
621 * btrace.h (replay) <replay>: New.
622 (btrace_is_replaying): New.
623 * btrace.c (btrace_clear): Free replay iterator.
624 (btrace_is_replaying): New.
625 * record-btrace.c (record_btrace_is_replaying): New.
626 (record_btrace_info): Print insn number if replaying.
627 (record_btrace_insn_history): Start at replay position.
628 (record_btrace_call_history): Start at replay position.
629 (init_record_btrace_ops): Init to_record_is_replaying.
631 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
633 * record-btrace.c (record_btrace_insn_history_range): Include
635 (record_btrace_insn_history_from): Adjust range.
636 (record_btrace_call_history_range): Include
638 (record_btrace_call_history_from): Adjust range.
639 * NEWS: Announce changes.
641 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
643 * record.h (enum record_print_flag)
644 <record_print_indent_calls>: New.
645 * record.c (get_call_history_modifiers): Recognize /c modifier.
646 (_initialize_record): Document /c modifier.
647 * record-btrace.c (btrace_call_history): Add btinfo parameter.
648 Reorder fields. Optionally indent the function name. Update
650 * NEWS: Announce changes.
652 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
654 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
656 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
658 * btrace.c (ftrace_new_function): Start counting at one.
659 * record-btrace.c (record_btrace_info): Adjust number of calls
663 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
665 * record-btrace.c (btrace_call_history_insn_range): Print
666 insn range as [begin, end].
668 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
670 * btrace.h (struct btrace_func_link): New.
671 (enum btrace_function_flag): New.
672 (struct btrace_inst): Rename to ...
673 (struct btrace_insn): ...this. Update all users.
674 (struct btrace_func) <ibegin, iend>: Remove.
675 (struct btrace_func_link): New.
676 (struct btrace_func): Rename to ...
677 (struct btrace_function): ...this. Update all users.
678 (struct btrace_function) <segment, flow, up, insn, insn_offset)
679 (number, level, flags>: New.
680 (struct btrace_insn_iterator): Rename to ...
681 (struct btrace_insn_history): ...this.
683 (struct btrace_insn_iterator, btrace_call_iterator): New.
684 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
685 (struct btrace_target_info) <begin, end, level>
686 <insn_history, call_history>: New.
687 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
688 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
689 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
690 (btrace_call_number, btrace_call_begin, btrace_call_end)
691 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
692 (btrace_find_function_by_number, btrace_set_insn_history)
693 (btrace_set_call_history): New.
694 * btrace.c (btrace_init_insn_iterator)
695 (btrace_init_func_iterator, compute_itrace): Remove.
696 (ftrace_print_function_name, ftrace_print_filename)
697 (ftrace_skip_file): Change
699 (ftrace_init_func): Remove.
700 (ftrace_debug): Use new btrace_function fields.
701 (ftrace_function_switched): Also consider gaining and
702 losing symbol information).
703 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
704 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
705 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
707 (ftrace_new_function): Move. Remove debug print.
708 (ftrace_update_lines, ftrace_update_insns): New.
709 (ftrace_update_function): Check for call, ret, and jump.
710 (compute_ftrace): Renamed to ...
711 (btrace_compute_ftrace): ...this. Rewritten to compute call
713 (btrace_fetch, btrace_clear): Updated.
714 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
715 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
716 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
717 (btrace_call_number, btrace_call_begin, btrace_call_end)
718 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
719 (btrace_find_function_by_number, btrace_set_insn_history)
720 (btrace_set_call_history): New.
721 * record-btrace.c (require_btrace): Use new btrace thread
723 (record_btrace_info, btrace_insn_history)
724 (record_btrace_insn_history, record_btrace_insn_history_range):
725 Use new btrace thread info fields and new iterator.
726 (btrace_func_history_src_line): Rename to ...
727 (btrace_call_history_src_line): ...this. Use new btrace
729 (btrace_func_history): Rename to ...
730 (btrace_call_history): ...this. Use new btrace thread info
731 fields and new iterator.
732 (record_btrace_call_history, record_btrace_call_history_range):
733 Use new btrace thread info fields and new iterator.
735 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
737 * frame.h (frame_id_build_unavailable_stack_special): New.
738 * frame.c (frame_id_build_unavailable_stack_special): New.
740 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
742 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
743 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
744 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
746 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
747 (i386_insn_is_jump, i386_jmp_p): New.
748 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
749 insn_is_jump to gdbarch.
750 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
751 * gdbarch.h: Regenerated.
752 * gdbarch.c: Regenerated.
753 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
754 (default_insn_is_jump): New.
755 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
756 (default_insn_is_jump): New.
758 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
760 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
762 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
763 (btrace_read_type) <btrace_read_new>: Change to ...
764 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
766 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
768 * common/linux-btrace.c (linux_read_btrace): Free trace from
771 2014-01-15 Doug Evans <dje@google.com>
773 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
776 2014-01-15 Tom Tromey <tromey@redhat.com>
778 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
779 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
780 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
781 (set_objfile_main_name): New function.
782 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
783 language_of_main>: New fields.
784 (set_objfile_main_name): Declare.
785 * symtab.c (find_main_name): Loop over objfiles to find the main
787 (set_main_name): Now static.
788 (get_main_info): Add comment.
789 * symtab.h (set_main_name): Don't declare.
791 2014-01-15 Tom Tromey <tromey@redhat.com>
793 * symtab.c (main_progspace_key): New global.
794 (struct main_info): New.
795 (name_of_main, language_of_main): Remove.
796 (get_main_info, main_info_cleanup): New function.
797 (set_main_name, main_name, main_language): Use get_main_info.
798 (_initialize_symtab): Initialize main_progspace_key.
800 2014-01-15 Tom Tromey <tromey@redhat.com>
802 * dbxread.c (process_one_symbol): Update.
803 * dwarf2read.c (read_partial_die): Update.
804 * symfile.c (set_initial_language): Call main_language.
805 * symtab.c (language_of_main): Now static.
806 (set_main_name): Add 'lang' parameter.
807 (find_main_name): Update.
808 (main_language): New function.
809 (symtab_observer_executable_changed): Update.
810 * symtab.h (set_main_name): Update.
811 (language_of_main): Remove.
812 (main_language): Declare.
814 2014-01-15 Tom Tromey <tromey@redhat.com>
816 * symfile.c (init_entry_point_info): Use new "initialized" field.
818 * objfiles.h (struct entry_point) <initialized>: New field.
819 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
820 (struct objfile) <ei>: ...here. Remove.
821 * objfiles.c (entry_point_address_query): Update.
823 2014-01-15 Tom Tromey <tromey@redhat.com>
825 * objfiles.c (entry_point_address_query): Relocate entry point
827 (objfile_relocate1): Do not relocate entry point address.
828 * objfiles.h (struct entry_info) <entry_point>: Update comment.
829 <the_bfd_section_index>: New field.
830 * symfile.c (init_entry_point_info): Find the entry point's
833 2014-01-15 Tom Tromey <tromey@redhat.com>
835 * solib-frv.c (enable_break): Use entry_point_address_query.
837 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
839 * NEWS: Add note on improved process record-replay on
842 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
844 * arm-tdep.c (enum arm_record_result): New enum.
845 (arm_record_unsupported_insn): New function.
846 (arm_record_coproc_data_proc): Removed.
847 (thumb2_record_ld_st_multiple): New function.
848 (thumb2_record_ld_st_dual_ex_tbb): New function.
849 (thumb2_record_data_proc_sreg_mimm): New function.
850 (thumb2_record_ps_dest_generic): New function.
851 (thumb2_record_branch_misc_cntrl): New function.
852 (thumb2_record_str_single_data): New function.
853 (thumb2_record_ld_mem_hints): New function.
854 (thumb2_record_ld_word): New function.
855 (thumb2_record_lmul_lmla_div): New function.
856 (thumb2_record_decode_insn_handler): New function.
857 (decode_insn): Add thumb32 instruction handlers.
859 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
861 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
862 (struct arm_linux_record_tdep): Declare.
863 (arm_canonicalize_syscall): New function.
864 (arm_all_but_pc_registers_record): New function.
865 (arm_linux_syscall_record): New function.
866 (arm_linux_init_abi): Add syscall recording constructs.
867 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
868 decoding. (arm_record_coproc_data_proc): Update arm syscall
870 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
871 <arm_syscall_record>: New field.
872 * configure.tgt (arm*-*-linux*): Add linux-record.o to
875 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
877 * arm-tdep.c (thumb_record_misc): Update to use sp as base
878 register for push instruction recording.
880 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
882 * arm-tdep.c (thumb_record_misc): Update to correct logical
883 error while recording ldm, ldmia and pop instructions.
885 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
887 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
889 2014-01-15 Pedro Alves <palves@redhat.com>
891 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
892 (go32_resume, go32_fetch_registers, store_register)
893 (go32_store_registers, go32_prepare_to_store)
894 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
895 (go32_create_inferior, go32_can_run, go32_terminal_init)
896 (go32_terminal_inferior, go32_terminal_ours): Delete forward
899 2014-01-15 Tom Tromey <tromey@redhat.com>
901 * target.h (async_callback_ftype): New typedef.
902 (struct target_ops) <to_async>: Use it.
904 2014-01-15 Joel Brobecker <brobecker@adacore.com>
906 * python/py-value.c (get_field_type): Remove unnecessary curly
907 braces for single-statement if block.
909 2014-01-15 Joel Brobecker <brobecker@adacore.com>
911 * python/py-type.c (convert_field): Add missing empty line
914 2014-01-14 Doug Evans <dje@google.com>
916 * symfile.h (expand_symtabs_matching): Renamed from
917 expand_partial_symbol_names. Update prototype.
918 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
919 * symfile.c (expand_symtabs_matching): Renamed from
920 expand_partial_symbol_names. New args file_matcher, kind.
921 Rename arg fun to symbol_matcher.
922 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
923 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
924 ada_expand_partial_symbol_name.
925 (ada_make_symbol_completion_list): Update to call
926 expand_symtabs_matching.
927 (ada_add_global_exceptions): Call expand_symtabs_matching.
928 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
929 call map_symbol_filenames.
930 * symtab.c (sources_info): Update to call map_symbol_filenames.
931 (search_symbols): Call expand_symtabs_matching.
932 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
933 (default_make_symbol_completion_list_break_on): Update to call
934 expand_symtabs_matching.
935 (make_source_files_completion_list): Update to call
936 map_symbol_filenames.
938 2014-01-14 Doug Evans <dje@google.com>
940 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
941 (expand_symtabs_symbol_matcher_ftype): New typedef.
942 (quick_symbol_functions.expand_symtabs_matching): Update to use.
943 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
944 * symfile.c (expand_partial_symbol_names): Update to use
945 expand_symtabs_symbol_matcher_ftype.
946 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
947 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
948 Arg name_matcher renamed to symbol_matcher.
949 * psymtab.c (recursively_search_psymtabs): Update to use
950 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
952 (expand_symtabs_matching_via_partial): Update to use
953 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
954 Arg name_matcher renamed to symbol_matcher.
956 2014-01-14 Doug Evans <dje@google.com>
958 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
959 (map_partial_symbol_filenames): Ditto.
960 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
961 (map_partial_symbol_filenames): Ditto.
962 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
963 (map_partial_symbol_filenames): Ditto.
964 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
965 (map_partial_symbol_filenames): Ditto.
966 * symtab.c: Delete #include "psymtab.h".
968 2014-01-14 Pedro Alves <palves@redhat.com>
969 Tom Tromey <tromey@redhat.com>
971 * infrun.c (use_displaced_stepping): Use find_record_target
972 instead of RECORD_IS_USED.
973 (adjust_pc_after_break): Use record_full_is_used instead of
975 * record-btrace.c (record_btrace_open): Call record_preopen
976 instead of checking RECORD_IS_USED.
977 * record-full.c (record_full_shortname)
978 (record_full_core_shortname): New globals.
979 (record_full_is_used): New function.
980 (find_full_open): Call record_preopen instead of checking
982 (init_record_full_ops): Set the target's shortname to
983 record_full_shortname.
984 (init_record_full_core_ops): Set the target's shortname to
985 record_full_core_shortname.
986 * record-full.h (record_full_is_used): Declare.
987 * record.c (find_record_target): Make extern.
988 (record_preopen): New function.
989 * record.h (RECORD_IS_USED): Delete macro.
990 (find_record_target, record_preopen): Declare functions.
992 2014-01-14 Yao Qi <yao@codesourcery.com>
994 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
995 'len''s type to ULONGEST.
996 (core_xfer_shared_libraries_aix): Likewise.
997 * gdbarch.c, gdbarch.h: Regenerated.
998 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
999 Change type of 'len' to ULONGEST.
1000 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1001 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1003 2014-01-14 Yao Qi <yao@codesourcery.com>
1005 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1006 type of 'len' to ULONGEST.
1007 (linux_xfer_osdata_processgroups): Likewise.
1008 (linux_xfer_osdata_threads): Likewise.
1009 (linux_xfer_osdata_fds): Likewise.
1010 (linux_xfer_osdata_isockets): Likewise.
1011 (linux_xfer_osdata_shm): Likewise.
1012 (linux_xfer_osdata_sem): Likewise.
1013 (linux_xfer_osdata_msg): Likewise.
1014 (linux_common_xfer_osdata): Likewise.
1015 (struct osdata_type) <getter>: Likewise.
1016 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1019 2014-01-14 Yao Qi <yao@codesourcery.com>
1021 * target.h (target_xfer_partial_ftype): Update.
1022 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1024 * aix-thread.c (aix_thread_xfer_partial): Change type of
1025 argument 'len' to ULONGEST.
1026 * auxv.c (procfs_xfer_auxv): Likewise.
1027 (ld_so_xfer_auxv): Likewise.
1028 (memory_xfer_auxv): Likewise.
1029 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1030 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1031 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1032 * corelow.c (core_xfer_partial): Likewise.
1033 * ctf.c (ctf_xfer_partial): Likewise.
1034 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1036 (darwin_read_dyld_info): Likewise.
1037 (darwin_xfer_partial): Likewise.
1038 * exec.c (section_table_xfer_memory_partial): Likewise.
1039 (exec_xfer_partial): Likewise.
1040 * exec.h (section_table_xfer_memory_partial): Update
1042 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1043 instead of plongest.
1044 (gnu_xfer_partial): Likewise.
1045 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1046 (ia64_hpux_xfer_solib_got): Likewise.
1047 (ia64_hpux_xfer_partial): Likewise.
1048 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1049 * inf-ptrace.c (inf_ptrace_xfer_partial):
1050 * inf-ttrace.c (inf_ttrace_xfer_partial):
1051 * linux-nat.c (linux_xfer_siginfo): Likewise.
1052 (linux_nat_xfer_partial): Likewise.
1053 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1054 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1055 * monitor.c (monitor_xfer_memory): Likewise.
1056 (monitor_xfer_partial): Likewise.
1057 * procfs.c (procfs_xfer_partial): Likewise.
1058 * record-full.c (record_full_xfer_partial): Likewise.
1059 (record_full_core_xfer_partial): Likewise.
1060 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1061 instead of plongest.
1062 (gdbsim_xfer_partial): Likewise.
1063 * remote.c (remote_xfer_partial): Likewise.
1064 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1065 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1067 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1068 (rs6000_xfer_shared_libraries): Likewise.
1069 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1070 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1071 (sparc_xfer_partial): Likewise.
1072 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1073 (spu_xfer_partial): Likewise.
1074 * spu-multiarch.c (spu_xfer_partial): Likewise.
1075 * target.c (target_read_live_memory): Likewise.
1076 (memory_xfer_live_readonly_partial): Likewise.
1077 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1078 (target_xfer_partial, default_xfer_partial): Likewise.
1079 (current_xfer_partial): Likewise.
1080 * tracepoint.c (tfile_xfer_partial): Likewise.
1081 * windows-nat.c (windows_xfer_memory): Likewise. Call
1082 pulongest instead of plongest.
1083 (windows_xfer_partial): Likewise.
1084 (windows_xfer_shared_libraries): Likewise.
1086 2014-01-14 Yao Qi <yao@codesourcery.com>
1088 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1089 target_xfer_partial_ftype.
1091 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1095 * valops.c (value_struct_elt_bitpos): New function
1096 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1097 object to 'None' if the field name is an empty string ("").
1098 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1099 attribute to look for a field when 'name' is 'None'.
1100 (get_field_type): New function
1102 2014-01-13 Doug Evans <dje@google.com>
1105 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1106 (try_open_dwop_file): Ditto.
1107 * gdb_bfd.c: #include "vec.h".
1108 (bfdp): New typedef.
1109 (struct gdb_bfd_data): New member included_bfds.
1110 (gdb_bfd_unref): Unref all included bfds.
1111 (gdb_bfd_record_inclusion): New function.
1112 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1114 2014-01-13 Tom Tromey <tromey@redhat.com>
1116 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1118 2014-01-13 Tom Tromey <tromey@redhat.com>
1120 * defs.h (use_windows): Remove.
1121 * gdb.c (main): Update.
1122 * main.c (captured_main, gdb_main): Update.
1123 * main.h (struct captured_main_args) <use_windows>: Remove.
1124 * top.c (use_windows): Remove.
1126 2014-01-13 Tom Tromey <tromey@redhat.com>
1128 * defs.h (deprecated_flush_hook): Remove.
1130 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1133 * linux-thread-db.c (try_thread_db_load): Add parameter
1134 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1135 (try_thread_db_load_from_pdir_1): Move it there from here.
1136 (try_thread_db_load_from_sdir): Update caller.
1137 (try_thread_db_load_from_dir): Move it there from here.
1139 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1141 * regformats/regdat.sh: Always rewrite the register file.
1143 2014-01-13 Pedro Alves <palves@redhat.com>
1145 * Makefile.in (CHECK_HEADERS): New variable.
1146 (check-headers:): New rule.
1148 2014-01-13 Tom Tromey <tromey@redhat.com>
1150 * cli/cli-setshow.c (do_set_command): Update.
1151 * defs.h (deprecated_set_hook): Remove.
1152 * top.c (deprecated_set_hook): Remove.
1154 2014-01-13 Pedro Alves <palves@redhat.com>
1156 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1157 the tracepoint if the PC is a pseudo-register.
1159 2014-01-13 Tom Tromey <tromey@redhat.com>
1161 * defs.h (XCALLOC): Remove.
1162 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1163 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1164 * dwarf2loc.c (allocate_piece_closure): Likewise.
1165 * elfread.c (elf_symfile_segments): Likewise.
1166 (elf_symfile_segments): Likewise.
1167 * gdbtypes.c (copy_type_recursive): Likewise.
1168 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1169 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1170 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1172 * mt-tdep.c (mt_gdbarch_init): Likewise.
1173 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1175 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1176 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1177 * registry.c (registry_alloc_data): Likewise.
1178 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1179 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1180 * serial.c (serial_fdopen_ops): Likewise.
1181 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1183 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1184 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1187 2014-01-13 Tom Tromey <tromey@redhat.com>
1189 * defs.h (XMALLOC): Remove.
1190 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1191 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1192 * cli-out.c (struct ui_out *): Likewise.
1193 * cli/cli-dump.c (add_dump_command): Likewise.
1194 (add_dump_command): Likewise.
1195 * complaints.c (get_complaints): Likewise.
1196 (find_complaint): Likewise.
1197 * dwarf2-frame.c (execute_cfa_program): Likewise.
1198 * dwarf2read.c (abbrev_table_read_table): Likewise.
1199 * gdbarch.sh: Likewise.
1200 * gdbarch.c: Rebuild.
1201 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1202 * interps.c (interp_new): Likewise.
1203 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1204 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1205 * mi/mi-console.c (mi_console_file_new): Likewise.
1206 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1207 * mi/mi-out.c (mi_out_new): Likewise.
1208 * mi/mi-parse.c (mi_parse): Likewise.
1209 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1210 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1211 * observer.c (xalloc_observer_list_node): Likewise.
1212 * regcache.c (regcache_xmalloc_1): Likewise.
1213 * reggroups.c (reggroup_new): Likewise.
1214 (_initialize_reggroup): Likewise.
1215 * registry.c (register_data_with_cleanup): Likewise.
1216 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1217 * ser-base.c (serial_ttystate): Likewise.
1218 * ser-mingw.c (make_pipe_state): Likewise.
1219 * ser-pipe.c (pipe_open): Likewise.
1220 * serial.c (serial_open): Likewise.
1221 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1222 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1223 (tui_alloc_win_info): Likewise.
1224 (tui_add_content_elements): Likewise.
1225 * tui/tui-file.c (tui_file_new): Likewise.
1226 * tui/tui-out.c (tui_out_new): Likewise.
1227 * ui-file.c (mem_file_new): Likewise.
1228 * ui-out.c (push_level): Likewise.
1229 (make_cleanup_ui_out_end): Likewise.
1230 (append_header_to_list): Likewise.
1231 (ui_out_new): Likewise.
1232 * user-regs.c (user_reg_add_builtin): Likewise.
1234 2014-01-13 Tom Tromey <tromey@redhat.com>
1236 * defs.h (XZALLOC): Remove.
1237 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1238 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1239 (get_ada_tasks_inferior_data): Likewise.
1240 * auto-load.c (get_auto_load_pspace_data): Likewise.
1241 * auxv.c (get_auxv_inferior_data): Likewise.
1242 * bfd-target.c (target_bfd_reopen): Likewise.
1243 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1244 (deprecated_insert_raw_breakpoint): Likewise.
1245 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1246 * corelow.c (core_open): Likewise.
1247 * darwin-nat.c (darwin_check_new_threads): Likewise.
1248 (darwin_attach_pid): Likewise.
1249 * dummy-frame.c (dummy_frame_push): Likewise.
1250 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1251 * dwarf2loc.c (allocate_piece_closure): Likewise.
1252 * elfread.c (elf_symfile_segments): Likewise.
1253 * eval.c (ptrmath_type_p): Likewise.
1254 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1255 * gdbtypes.c (alloc_type_arch): Likewise.
1256 (alloc_type_instance): Likewise.
1257 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1258 * inf-child.c (inf_child_can_use_agent): Likewise.
1259 * inflow.c (get_inflow_inferior_data): Likewise.
1260 * infrun.c (save_infcall_suspend_state): Likewise.
1261 * jit.c (jit_reader_load): Likewise.
1262 (get_jit_objfile_data): Likewise.
1263 (get_jit_program_space_data): Likewise.
1264 (jit_object_open_impl): Likewise.
1265 (jit_symtab_open_impl): Likewise.
1266 (jit_block_open_impl): Likewise.
1267 (jit_frame_sniffer): Likewise.
1268 * linux-fork.c (add_fork): Likewise.
1269 * maint.c (make_command_stats_cleanup): Likewise.
1270 * objfiles.c (get_objfile_pspace_data): Likewise.
1271 * opencl-lang.c (struct lval_closure): Likewise.
1272 * osdata.c (osdata_start_osdata): Likewise.
1273 * progspace.c (new_address_space): Likewise.
1274 (add_program_space): Likewise.
1275 * remote-sim.c (get_sim_inferior_data): Likewise.
1276 * sh-tdep.c (sh_gdbarch_init): Likewise.
1277 * skip.c (Ignore): Likewise.
1278 (skip_delete_command): Likewise.
1279 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1280 (library_list_start_library): Likewise.
1281 (solib_aix_current_sos): Likewise.
1282 * solib-darwin.c (get_darwin_info): Likewise.
1283 (darwin_current_sos): Likewise.
1284 * solib-dsbt.c (get_dsbt_info): Likewise.
1285 * solib-ia64-hpux.c (new_so_list): Likewise.
1286 (ia64_hpux_get_solib_linkage_addr): Likewise.
1287 * solib-spu.c (append_ocl_sos): Likewise.
1288 (spu_current_sos): Likewise.
1289 * solib-svr4.c (get_svr4_info): Likewise.
1290 (svr4_keep_data_in_core): Likewise.
1291 (library_list_start_library): Likewise.
1292 (svr4_default_sos): Likewise.
1293 (svr4_read_so_list): Likewise.
1294 * solib-target.c (library_list_start_library): Likewise.
1295 (solib_target_current_sos): Likewise.
1296 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1297 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1298 * symfile.c (default_symfile_segments): Likewise.
1299 * target-descriptions.c (tdesc_data_init): Likewise.
1300 (tdesc_create_reg): Likewise.
1301 (struct tdesc_type *): Likewise.
1302 (tdesc_create_vector): Likewise.
1303 (tdesc_set_struct_size): Likewise.
1304 (struct tdesc_type *): Likewise.
1305 (tdesc_free_feature): Likewise.
1306 (tdesc_create_feature): Likewise.
1307 * windows-nat.c (windows_add_thread): Likewise.
1308 (windows_make_so): Likewise.
1309 * xml-support.c (gdb_xml_body_text): Likewise.
1310 (gdb_xml_create_parser_and_cleanup): Likewise.
1311 (xml_process_xincludes): Likewise.
1312 * xml-syscall.c (allocate_syscalls_info): Likewise.
1313 (syscall_create_syscall_desc): Likewise.
1315 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1317 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1318 function, with code from i386_stap_parse_special_token.
1319 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1320 (i386_stap_parse_special_token): Move code to the two functions
1323 2014-01-09 Pedro Alves <palves@redhat.com>
1324 Hui Zhu <hui@codesourcery.com>
1327 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1328 bp_err_string. Don't mark the location shlib_disabled if the
1329 error thrown wasn't a generic or memory error. Catch errors
1330 thrown while inserting breakpoints in overlayed code. Output
1331 error message of software breakpoints.
1332 * remote.c (remote_insert_breakpoint): If this breakpoint has
1333 target-side commands but this stub doesn't support Z0 packets,
1334 throw NOT_SUPPORTED_ERROR error.
1335 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1336 * target.h (target_insert_breakpoint): Extend comment.
1337 (target_insert_hw_breakpoint): Add comment.
1339 2014-01-08 Pedro Alves <palves@redhat.com>
1341 * remote.c (remote_add_thread): Add threads silently if starting
1343 (remote_notice_new_inferior): If in all-stop, and starting up,
1344 don't call notice_new_inferior.
1345 (get_current_thread): New function, factored out from ...
1346 (add_current_inferior_and_thread): ... this. Adjust.
1347 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1348 found any thread, then select the remote's current thread as GDB's
1351 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1353 * NEWS: Create a new section for the next release branch.
1354 Rename the section of the current branch, now that it has
1357 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1359 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1360 * version.in: Bump version to 7.7.50.DATE-cvs.
1362 2014-01-08 Yao Qi <yao@codesourcery.com>
1364 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1365 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1366 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1368 2014-01-08 Yao Qi <yao@codesourcery.com>
1370 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1371 return value of bfd_get_filename to symbol_file_add_from_bfd.
1373 2014-01-08 Pierre Muller <muller@sourceware.org>
1376 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1377 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1378 to prim_record_mininal_symbol_and_info.
1379 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1380 in call to prim_record_minimal_symbol_and_info.
1381 (read_pe_exported_syms): Set index field of section_data.
1383 2014-01-07 Andrew Pinski <apinski@cavium.com>
1385 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1386 * features/aarch64.c: Regenerate.
1388 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1390 * target.c (return_null): Define.
1391 (update_current_target): Use it instead of return_zero for
1392 functions that return a pointer.
1394 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1396 * source.c (add_path): Fix check for duplicated paths in the previously
1399 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1401 * ada-lang.c: Remove duplicated include statements.
1402 * alphabsd-nat.c: Ditto.
1403 * amd64-darwin-tdep.c: Ditto.
1404 * amd64fbsd-nat.c: Ditto.
1405 * auto-load.c: Ditto.
1407 * breakpoint.c: Ditto.
1409 * fork-child.c: Ditto.
1410 * gdb_usleep.c: Ditto.
1411 * i386-darwin-tdep.c: Ditto.
1412 * i386fbsd-nat.c: Ditto.
1414 * inferior.c: Ditto.
1416 * linux-nat.c: Ditto.
1417 * linux-tdep.c: Ditto.
1418 * m68kbsd-nat.c: Ditto.
1419 * m68klinux-nat.c: Ditto.
1420 * microblaze-tdep.c: Ditto.
1421 * mips-linux-tdep.c: Ditto.
1422 * mn10300-tdep.c: Ditto.
1423 * nto-tdep.c: Ditto.
1424 * opencl-lang.c: Ditto.
1426 * printcmd.c: Ditto.
1427 * regcache.c: Ditto.
1428 * remote-m32r-sdi.c: Ditto.
1432 * tilegx-linux-nat.c: Ditto.
1433 * tilegx-tdep.c: Ditto.
1434 * tracepoint.c: Ditto.
1436 * vaxbsd-nat.c: Ditto.
1437 * windows-nat.c: Ditto.
1438 * xtensa-tdep.c: Ditto.
1440 2014-01-07 Yao Qi <yao@codesourcery.com>
1442 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1444 2014-01-07 Yao Qi <yao@codesourcery.com>
1445 Joel Brobecker <brobecker@adacore.com>
1447 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1448 (pdc_write_regs): Likewise.
1449 (fetch_regs_kernel_thread): Likewise.
1450 (store_regs_kernel_thread): Likewise.
1452 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1454 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1455 tagged type objects to their actual type.
1457 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1459 * ada-valprint.c (print_field_values): Add "language" parameter.
1460 Update calls to print_field_values and print_variant_part.
1461 Pass new parameter "language" in call to val_print instead
1462 of "current_language". Replace call to ada_val_print by call
1464 (print_variant_part): Add "language" parameter.
1465 (ada_val_print_struct_union): Update call to print_field_values.
1467 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1469 * ada-valprint.c (ui_memcpy): Delete.
1470 (ada_print_floating): Update documentation. Add empty line
1471 between between function documentation and implementation.
1472 Delete variable "buffer". Use ui_file_xstrdup in place of
1473 ui_file_put. Minor adjustments following this change.
1475 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1477 * ada-valprint.c (ada_val_print_string): New function,
1478 extracted from ada_val_print_array.
1479 (ada_val_print_array): Replace extracted code by call
1480 to ada_val_print_string followed by a return. Move
1481 "else" branch to the function's top block.
1483 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1485 * ada-valprint.c (ada_val_print_array): Move implementation
1486 down. Rename parameter "offset" and "val" into "offset_aligned"
1487 and "original_value" respectively. Add parameter "offset".
1489 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1491 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1492 re-organizing the code. Change the "???" message printed
1493 when target type is a TYPE_CODE_UNDEF into
1494 "<ref to undefined type>".
1496 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1498 * ada-valprint.c (print_record): Delete, implementation inlined...
1499 (ada_val_print_struct_union): ... here. Remove call to
1500 ada_check_typedef in inlined implementation.
1502 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1504 * ada-valprint.c (ada_val_print_gnat_array): New function,
1505 extracted from ada_val_print_1;
1506 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1507 (ada_val_print_flt, ada_val_print_struct_union)
1508 (ada_val_print_ref): Likewise.
1509 (ada_val_print_1): Delete variables i and elttype.
1510 Replace extracted-out code by call to corresponding
1513 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1515 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1517 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1519 * ada-valprint.c (ada_val_print_1): Replace calls to
1520 ada_val_print_1 by calls to val_print.
1522 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1524 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1525 Update calls to self accordingly. Replace calls to c_val_print
1526 by calls to val_print.
1528 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1530 * ada-valprint.c (print_record): Delete declaration.
1531 (adjust_type_signedness, ada_val_print_1): Likewise.
1532 (ada_val_print): Move function implementation down.
1533 (print_variant_part, print_field_values, print_record):
1534 Move function implementation up.
1536 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1538 * python/py-type.c (typy_get_name): New function.
1539 (type_object_getset): Add entry for attribute "name".
1540 * NEWS: Add entry mentioning this new attribute.
1542 2014-01-07 Yao Qi <yao@codesourcery.com>
1544 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1547 2014-01-07 Yao Qi <yao@codesourcery.com>
1549 * gnu-nat.c (info_port_rights): Add qualifier const to
1552 2014-01-07 Yao Qi <yao@codesourcery.com>
1554 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1556 2014-01-07 Yao Qi <yao@codesourcery.com>
1558 * gnu-nat.c (make_inf) Update declaration.
1559 (make_inf): Make it static.
1560 (inf_set_traced): Likewise.
1561 (inf_port_to_thread, inf_task_died_status): Likewise.
1563 2014-01-07 Yao Qi <yao@codesourcery.com>
1565 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1567 2014-01-07 Yao Qi <yao@codesourcery.com>
1569 * gnu-nat.c (_initialize_gnu_nat): Declare.
1571 2014-01-07 Yao Qi <yao@codesourcery.com>
1573 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1575 (struct gdbarch_info) <byte_order>: Change type to
1577 <byte_order_for_code>: Likewise.
1578 * gdbarch.c, gdbarch.h: Regenerated.
1580 2014-01-06 Sasha Smundak <asmundak@google.com>
1582 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1584 2014-01-06 Tom Tromey <tromey@redhat.com>
1586 * doublest.c (convert_doublest_to_floatformat): Use const, not
1588 * somread.c (som_symtab_read): Likewise.
1590 2014-01-07 Hui Zhu <hui@codesourcery.com>
1592 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1593 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1594 (gdb_bfd_fopen): Ditto.
1595 (gdb_bfd_openr): Ditto.
1596 (gdb_bfd_openw): Ditto.
1597 (gdb_bfd_openr_iovec): Ditto.
1598 (gdb_bfd_fdopenr): Ditto.
1599 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1600 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1602 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1604 * symfile-mem.c (symbol_file_add_from_memory): Removed
1605 gdb_bfd_stash_filename.
1607 2014-01-03 Doug Evans <dje@google.com>
1609 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1612 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1614 Update year range in copyright notice of all files.
1616 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1618 * top.c (print_gdb_version): Set copyright year to 2014.
1620 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1622 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1624 For older changes see ChangeLog-2013.
1630 version-control: never