1 2012-04-14 Yao Qi <yao@codesourcery.com>
3 Import gnulib module inttypes from git
4 (250b80067c1e1d8faa0c42fb572f721975b929c5)
5 * Makefile.in (HFILES_NO_SRCDIR): Add gnulib/inttypes.in.h.
6 (aclocal_m4_deps): Add gnulib/m4/inttypes.m4 and gnulib/m4/inttypes-pri.m4
7 * aclocal.m4, config.in, configure: Regenerated.
8 * gnulib/Makefile.am: Update.
9 * gnulib/Makefile.in: Update.
10 * gnulib/m4/gnulib-cache.m4: Update.
11 * gnulib/m4/gnulib-comp.m4: Update.
12 * gnulib/inttypes.in.h: New.
13 * gnulib/m4/inttypes-pri.m4: New.
14 * gnulib/m4/inttypes.m4: New.
16 2012-04-13 Luis Machado <lgustavo@codesourcery.com>
18 * infrun.c (resume): Update PC address to the real PC after
19 preparing to do displaced stepping.
21 2012-04-12 Doug Evans <dje@google.com>
23 * dwarf2read.c (lookup_signatured_type): Remove arg "objfile", unused.
26 2012-04-12 Mark Kettenis <kettenis@gnu.org>
28 * i386bsd-nat.c (_initialize_i386bsd_nat): Add missing prototype.
30 2012-04-12 Doug Evans <dje@google.com>
32 * dwarf2read.c (create_all_type_units): Renamed from
33 create_debug_types_hash_table. All callers updated.
35 * dwarf2read.c (create_signatured_type_table_from_index): Rename
36 local type_sig to sig_type, type_offset to type_offset_in_tu.
37 (hash_signatured_type): Renamed from hash_type_signature,
39 (eq_signatured_type): Renamed from eq_type_signature,
41 (create_debug_types_hash_table): Rename local type_sig to sig_type.
42 (process_enumeration_scope): Ditto.
43 (lookup_signatured_type_at_offset): Ditto.
44 (load_full_type_unit, read_signatured_type): Ditto.
46 2012-04-12 Yao Qi <yao@codesourcery.com>
48 * remote.c (async_remote_interrupt): Correct function name in
50 (async_remote_interrupt_twice): Ditto.
52 2012-04-11 Yuanhui Zhang <asmwarrior@gmail.com>
54 * source.c (find_and_open_source): Consistently pass resulting
55 full path through xfullpath.
57 2012-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
59 Provide more specific displaced-stepping memory error message.
60 * infrun.c (displaced_step_prepare): New variable status. Call
61 target_read_memory instead of read_memory, provide more specific
64 2012-04-11 Tristan Gingold <gingold@adacore.com>
67 * darwin-nat.c (darwin_execvp): Revert previous patch.
69 2012-04-11 Tristan Gingold <gingold@adacore.com>
72 * darwin-nat.c (darwin_resume_thread): Call darwin_set_sstep only
75 2012-04-11 Tristan Gingold <gingold@adacore.com>
77 * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Fix
80 2012-04-11 Siva Chandra Reddy <sivachandra@google.com>
82 New command 'explore' which helps explore values and types in
84 * NEWS: Add an entry about the new 'explore' command.
85 * data-directory/Makefile.in: Add gdb/command/explore.py
86 * python/lib/gdb/command/explore.py: Implemention of the 'explore'
87 command using the GDB Python API.
89 2012-04-10 Maciej W. Rozycki <macro@codesourcery.com>
91 * mips-tdep.c (mips_skip_pic_trampoline_code): Correct sign
92 extension in jump target calculation.
94 2012-04-10 Maciej W. Rozycki <macro@codesourcery.com>
96 * mips-tdep.c (mips32_next_pc): Handle JALX.
98 2012-04-10 Yao Qi <yao@codesourcery.com>
100 * Makefile.in (gnulib/Makefile): Remove duplicated dependency.
102 2012-04-10 Yao Qi <yao@codesourcery.com>
104 * Makefile.in (aclocal_m4_deps): Add gnulib/m4/gnulib-cache.m4
105 and gnulib/m4/gnulib-tool.m4.
107 2012-04-10 Doug Evans <dje@google.com>
109 * dwarf2read.c (dwarf2_per_cu_data). Clarify comment.
110 (load_partial_dies): Clarify comment.
111 (find_partial_die): Support rereading type units.
112 Clarify CU handling, if we know offset is in CU, don't search for the
113 containing CU. Add comment regarding memory waste.
115 2012-04-10 H.J. Lu <hongjiu.lu@intel.com>
117 * features/Makefile (WHICH): Add i386/x32, i386/x32-linux,
118 i386/x32-avx and i386/x32-avx-linux.
119 (i386/x32-expedite): New.
120 (i386/x32-linux-expedite): Likewise.
121 (i386/x32-avx-expedite): Likewise.
122 (i386/x32-avx-linux-expedite): Likewise.
123 ($(outdir)/i386/x32.dat): Likewise.
124 ($(outdir)/i386/x32-linux.dat): Likewise.
125 ($(outdir)/i386/x32-avx.dat): Likewise.
126 ($(outdir)/i386/x32-avx-linux.dat): Likewise.
128 * features/i386/x32-avx-linux.xml: New file.
129 * features/i386/x32-avx.xml: Likewise.
130 * features/i386/x32-core.xml: Likewise.
131 * features/i386/x32-linux.xml: Likewise.
132 * features/i386/x32.xml: Likewise.
134 * features/i386/x32-avx-linux.c: New. Generated.
135 * features/i386/x32-avx.c: Likewise.
136 * features/i386/x32-linux.c: Likewise.
137 * features/i386/x32.c: Likewise.
138 * regformats/i386/x32-avx-linux.dat: Likewise.
139 * regformats/i386/x32-avx.dat: Likewise.
140 * regformats/i386/x32-linux.dat: Likewise.
141 * regformats/i386/x32.dat: Likewise.
143 2012-04-10 Tristan Gingold <gingold@adacore.com>
145 * darwin-nat.c (darwin_kill_inferior): Always use the no ptrace
146 code to kill the inferior.
148 2012-04-09 Mark Kettenis <kettenis@gnu.org>
150 * ada-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
152 * c-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
154 * cp-name-parser.y (yyss, yysslim, yyssp, yystacksize, yyvs)
155 (yyvsp): New defines.
156 * f-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
158 * jv-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
160 * m2-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
162 * objc-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
164 * p-exp.y (yyss, yysslim, yyssp, yystacksize, yyvs, yyvsp): New
167 2012-04-09 Mark Kettenis <kettenis@gnu.org>
169 * sparc64-tdep.c (sparc64_store_arguments)
170 (sparc64_store_arguments): Fix coding style.
172 2012-04-07 Mark Kettenis <kettenis@gnu.org>
174 * sparc64-tdep.c (sparc64_store_arguments): Fix handling of
175 complex floats, adjust some related comments and tighten a related
177 (sparc64_extract_return_value): Handle complex floats.
179 2012-04-07 Doug Evans <dje@google.com>
181 * dwarf2read.c (load_partial_dies): Change condition to assert.
183 2012-04-06 Doug Evans <dje@google.com>
185 * amd64-tdep.c (amd64_analyze_prologue): Recognize both variations of
188 2012-04-05 Kevin Buettner <kevinb@redhat.com>
190 * v850-tdep.c (E_NUM_OF_V850_REGS, E_NUM_OF_V850E_REGS): Fix
192 (v850_frame_cache): Use gdbarch_num_regs() instead of E_NUM_REGS.
193 (v850_gdbarch_init): Set `num_regs' as appropriate for the
196 2012-04-05 Keith Seitz <keiths@redhat.com>
198 * linespec.c (decode_compound): Remove.
199 (enum offset_relative_sign): New enum.
200 (struct line_offset): New struct.
201 (struct linespec): New struct.
202 (struct linespec_state): Move file_symtabs,
203 user_filename, and user_function into struct linespec.
204 Make result an anonymous struct holding vectors of
205 symbolp and minsym_and_objfile_d.
207 (enum ls_token_type): New enum.
208 (linespec_keywords): New array.
209 (struct ls_token): New struct.
210 (struct ls_parser): New struct.
211 (linespec_lexer_lex_number): New function.
212 (linespec_lexer_lex_keyword): New function.
213 (is_ada_operator): New function.
214 (skip_quote_char): New function.
215 (copy_token_string): New function.
216 (is_closing_quote_enclosed): New function.
217 (find_parameter_list_end): New function.
218 (linespec_lexer_lex_string): New function.
219 (linespec_lexer_lex_one): New function.
220 (linespec_lexer_consume_token): New function.
221 (linespec_lexer_peek_token): New function.
222 (cplusplus_error): Remove unused function.
223 (find_methods): Update comment.
224 (find_toplevel_char): Return const.
225 (is_objc_method_format): Remove unused function.
226 (find_toplevel_string): New function.
227 (is_linespec_boundary): Remove.
228 (symbol_not_found_error): New function.
229 (find_method_overload_end): Remove function.
230 (unexpected_linespec_error): New function.
231 (keep_name_info): Remove.
232 (linespec_parse_line_offset): New function.
233 (linespec_parse_basic): New function.
234 (canonicalize_linespec): New function.
235 (decode_line_internal): Remove.
236 (create_sals_line_offset): New function adapted from
238 (convert_linespec_to_sals): New function.
239 (parse_linespec): New function.
240 (linespec_parser_new): New function.
241 (linespec_state_destructor): Change parameter type to
242 struct linespec_state *.
243 Add language parameter.
244 Remove freeing of moved members.
245 (linespec_parser_delete): New function.
246 (decode_line_full): Use parse_linespec and linespec_parser_new.
247 (decode_line_1): Likewise.
248 (decode_indirect): Rename to ...
249 (linespec_expression_to_pc): ... this and rewrite
250 to simply find CORE_ADDR, storing this result for later
252 (locate_first_half): Remove.
253 (deocde_objc): Add parameter LS.
254 Initialize new struct collect_info members.
255 Handle minimal symbols, too.
256 (decode_compound): Delete.
257 (lookup_prefix_sym): Rewrite.
258 (compare_msymbols): New function.
259 (find_method): Rewrite.
260 Do not call cplusplus_error.
261 (symtabs_from_filename): Rewrite.
262 (collect_function_symbols): Delete.
263 (find_function_symbols): Rewrite without ARGPTR-style
265 (decode_all_digits): Delete. (Rewritten as create_sals_line_offset.)
266 (decode_dollar): Adapted and renamed to ...
267 (linespec_parse_variable): ... this.
268 (find_linespec_symbols): New function.
269 (decode_label): Adapted and renamed to ...
270 (find_label_symbols): ... this.
271 (decode_digits_list_mode): Add and use LS argument.
272 (decode_digits_ordinary): Likewise.
273 (collect_symbols): Do not collect SALs, just symbols and msymbols.
274 If in list mode, allow any symbol class. Otherwise, only
275 permit LOC_BLOCK symbols.
276 (minsym_found): Update comments.
277 (search_minsyms_for_name): Do not convert the matching symbol
278 into a SAL. Simply push the symbol and objfile into the
280 (decode_variable): Delete. Contents adapted into
281 find_linespec_symbols.
283 * cp-support.c (SKIP_SPACE): Remove.
284 (operator_tokens): Remove unused global.
285 (cp_validate_operator): Remove.
286 * cp-support.h (cp_validate_operator): Remove declaration.
288 2012-04-03 Jan Kratochvil <jan.kratochvil@redhat.com>
290 * cp-valprint.c (cp_print_value_fields): Check valprint_check_validity
291 for TYPE_VPTR_FIELDNO.
292 * valprint.c (valprint_check_validity): Make it global, move the
294 * value.h (valprint_check_validity): ... to this new declaration.
296 2012-04-02 Tristan Gingold <gingold@adacore.com>
298 * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Use
299 the STATE32 api for i386 state.
300 (i386_darwin_store_inferior_registers): Likewise.
302 2012-04-02 Tristan Gingold <gingold@adacore.com>
304 * i386-darwin-tdep.c (i386_darwin_thread_state_reg_offset): Fix
306 * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Fix
309 2012-04-02 Tristan Gingold <gingold@adacore.com>
312 * darwin-nat.c (darwin_execvp): Set binary preference.
314 2012-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
316 * NEWS (set breakpoint condition-evaluation): Use imperative mood.
318 2012-03-30 Tom Tromey <tromey@redhat.com>
320 * python/python.c (gdbpy_decode_line): Move cleanup creation out
321 of TRY_CATCH. Fix error handling.
322 * python/py-value.c (convert_value_from_python): Move 'old'
323 declaration to innermost scope.
325 2012-03-29 Joel Brobecker <brobecker@adacore.com>
326 Andrey Smirnov <andrew.smirnov@gmail.com>
328 -Wshadow warning fix.
329 * ada-lang.c (ada_make_symbol_completion_list): Rename parameters
330 "wild_match" and "encoded" into "wild_match_p" and "encoded_p".
331 Adjust code accordingly.
333 2012-03-29 Joel Brobecker <brobecker@adacore.com>
335 * ada-lang.c (symbol_completion_add): Rename parameter
336 "encoded" into "encoded_p". Ajust code and documentation
339 2012-03-29 Joel Brobecker <brobecker@adacore.com>
340 Andrey Smirnov <andrew.smirnov@gmail.com>
342 -Wshadow warning fix.
343 * ada-lang.c (symbol_completion_add): Rename parameter
344 "wild_match" into wild_match_p. Update code and documentation
347 2012-03-29 Joel Brobecker <brobecker@adacore.com>
349 * ada-lang.c (symbol_completion_match): Rename parameter
350 "encoded" into "encoded_p". Ajust code and documentation
353 2012-03-29 Joel Brobecker <brobecker@adacore.com>
354 Andrey Smirnov <andrew.smirnov@gmail.com>
356 -Wshadow warning fix.
357 * ada-lang.c (symbol_completion_match): Rename parameter
358 "wild_match" into "wild_match_p". Adjust code and function
359 documentation accordingly.
361 2012-03-29 Joel Brobecker <brobecker@adacore.com>
362 Andrey Smirnov <andrew.smirnov@gmail.com>
364 -Wshadow warning fix.
365 * ada-lang.c (ada_lookup_encoded_symbol): Rename parameter
366 "symbol_info" into "info". Adjust code accordingly.
367 (ada_lookup_symbol): Likewise.
369 2012-03-29 Joel Brobecker <brobecker@adacore.com>
371 * ada-lang.c (ada_lookup_symbol_list): Minor reformatting
372 of this function's documentation.
374 2012-03-29 Joel Brobecker <brobecker@adacore.com>
375 Andrey Smirnov <andrew.smirnov@gmail.com>
377 -Wshadow warning fix.
378 * ada-lang.c (ada_lookup_symbol_list): Rename "wild_match"
379 variable into "wild_match_p". Adjust code accordingly.
381 2012-03-29 Joel Brobecker <brobecker@adacore.com>
382 Andrey Smirnov <andrew.smirnov@gmail.com>
384 -Wshadow warning fix.
385 * ada-lang.c (ada_add_local_symbols): Rename "wild_match"
386 parameter into "wild_match_p". Adjust code accordingly.
387 Document this parameter in the function description.
389 2012-03-29 Joel Brobecker <brobecker@adacore.com>
390 Andrey Smirnov <andrew.smirnov@gmail.com>
392 -Wshadow warning fix.
393 * ada-lang.c (add_symbols_from_enclosing_procs): Rename
394 "wild_match" parameter to "wild_match_p" (-Wshadow).
396 2012-03-29 Joel Brobecker <brobecker@adacore.com>
398 * ada-lang.c (ada_lookup_simple_minsym): Remove trailing spaces
399 in function documentation.
401 2012-03-29 Joel Brobecker <brobecker@adacore.com>
402 Andrey Smirnov <andrew.smirnov@gmail.com>
404 -Wshadow warning fix.
405 * ada-lang.c (ada_lookup_simple_minsym): Rename wild_match local
406 variable into wild_match_p. Adjust code accordingly.
408 2012-03-29 Joel Brobecker <brobecker@adacore.com>
409 Andrey Smirnov <andrew.smirnov@gmail.com>
411 * ada-valprint.c (ada_val_print_1): Move the code handling
412 TYPE_CODE_ENUM inside its own lexical block. Declare
413 variables len and val there, instead of in the function's
414 top level block. Avoid declaring deref_val again in a way
415 that shadows another variable of the same name declared
416 in one of the up-level blocks. Just re-use the up-level
419 2012-03-29 Joel Brobecker <brobecker@adacore.com>
421 * ada-lang.c (ada_lookup_encoded_symbol): Now returns void.
422 Replace block_found argument by symbol_info. Adjust
423 implementation accordingly. Add function documentation.
424 (ada_lookup_symbol): Adjust to new ada_lookup_encoded_symbol.
426 * ada-lang.h (ada_lookup_encoded_symbol): Update declaration.
427 * ada-exp.y (write_object_renaming): Adjust to new
428 ada_lookup_encoded_symbol API.
430 2012-03-29 Joel Brobecker <brobecker@adacore.com>
432 * ada-lang.h (struct ada_symbol_info): Reformat. Improve
435 2012-03-28 Rathish C <rathish.c@kpitcummins.com>
437 * v850-tdep.c: Add the enum values for mpu and fpu registers.
438 (v850_register_name): Add the mpu and fpu register names.
439 (v850e_register_name): Add the mpu and fpu register names.
440 (v850e2_register_name): New function.
441 (v850_gdbarch_init): Add case for bfd_mach_v850e2 and
444 2012-03-28 Joel Brobecker <brobecker@adacore.com>
446 * NEWS: Add entry for Ada varobj support.
448 2012-03-28 Joel Brobecker <brobecker@adacore.com>
450 * varobj.c (default_value_is_changeable_p): New function,
451 extracted from varobj_value_is_changeable_p. Add declaration.
452 (ada_value_is_changeable_p): New function, extracted from
453 varobj_value_is_changeable_p. Add declaration.
454 (struct language_specific): New field "value_is_changeable_p".
455 (languages): Add entries for new field.
456 (varobj_create): Set language before calling install_new_value.
457 (varobj_value_is_changeable_p): Reimplement to call the varobj's
458 "value_is_changeable_p" language callback.
460 2012-03-28 Joel Brobecker <brobecker@adacore.com>
462 * ada-varobj.h, ada-varobj.c: New files.
463 * Makefile.in (SFILES): Add ada-varobj.c.
464 (HFILES_NO_SRCDIR): Add ada-varobj.h.
465 (COMMON_OBS): Add ada-varobj.o.
467 2012-03-28 Joel Brobecker <brobecker@adacore.com>
469 * varobj.c (ada_value_has_mutated): Add declaration. New function.
470 (struct language_specific): New field "value_has_mutated".
471 (languages): Set field "value_has_mutated" in each entry of array.
472 (varobj_value_has_mutated): New function.
473 (varobj_udpdate): Add handling of type mutation.
474 (value_of_root): Add handling of type mutation.
475 (ada_value_has_mutated): New function.
477 2012-03-28 Pedro Alves <palves@redhat.com>
479 * ia64-linux-nat.c (supply_fpregset, ia64_linux_fetch_register):
480 Always supply $fr0 as 0.0 and $fr1 as 1.0.
482 2012-03-28 Tom Tromey <tromey@redhat.com>
484 * python/py-inferior.c (infpy_read_memory): Remove cleanups and
485 explicitly free 'buffer' on exit paths. Decref 'membuf_object'
488 2012-03-28 Tom Tromey <tromey@redhat.com>
490 * .dir-locals.el: New file.
492 2012-03-28 Pedro Alves <palves@redhat.com>
494 * ia64-linux-nat.c (u_offsets): Map IA64_EC_REGNUM to PT_AR_EC.
496 2012-03-28 Joel Brobecker <brobecker@adacore.com>
498 * ia64-linux-nat.c (ia64_linux_fetch_register): Add special
501 2012-03-27 Pedro Alves <palves@redhat.com>
503 Eliminate struct ui_stream.
505 * ui-out.h (struct ui_stream): Delete.
506 (ui_out_field_stream): Adjust prototype.
507 (ui_out_stream_new, ui_out_stream_delete)
508 (make_cleanup_ui_out_stream_delete): Delete declarations.
509 * ui-out.c (ui_out_field_stream): Change prototype to take a
510 ui_file instead of a ui_stream. Adjust.
511 (ui_out_stream_new, ui_out_stream_delete, do_stream_delete)
512 (make_cleanup_ui_out_stream_delete): Delete.
513 * breakpoint.c (print_breakpoint_location)
514 (print_one_detail_ranged_breakpoint, print_it_watchpoint): Use
515 ui_file/mem_fileopen instead of ui_stream/ui_out_stream_new.
516 * disasm.c (dump_insns): Ditto.
517 (do_mixed_source_and_assembly, do_assembly_only): Adjust
519 (gdb_disassembly): Use ui_file/mem_fileopen instead of
520 ui_stream/ui_out_stream_new.
521 * infcmd.c (print_return_value): Ditto.
522 * osdata.c (info_osdata_command): Don't allocate a local
524 * stack.c (print_frame_arg, print_frame_args, print_frame): Use
525 ui_file/mem_fileopen instead of ui_stream/ui_out_stream_new.
526 * tracepoint.c (print_one_static_tracepoint_marker): Don't
527 allocate a local ui_stream.
528 * mi/mi-cmd-stack.c (list_arg_or_local): Use ui_file/mem_fileopen
529 instead of ui_stream/ui_out_stream_new.
530 (list_args_or_locals): Don't allocate a local ui_stream.
531 * mi/mi-main.c (get_register, mi_cmd_data_evaluate_expression)
532 (mi_cmd_data_read_memory): Use ui_file/mem_fileopen instead of
533 ui_stream/ui_out_stream_new.
534 * cli/cli-setshow.c (do_setshow_command): Ditto.
536 2012-03-27 Oza Pawandeep <oza.pawandeep@gmail.com>
538 * arm-linux-tdep.c (arm_linux_init_abi): Call
539 set_gdbarch_process_record. Initialize `arm_swi_record' field.
540 * arm-tdep.c (arm_process_record): New function.
541 (deallocate_reg_mem): New function.
542 (decode_insn): New function.
543 (thumb_record_branch): New function.
544 (thumb_record_ldm_stm_swi(): New function.
545 (thumb_record_misc): New function.
546 (thumb_record_ld_st_stack): New function.
547 (thumb_record_ld_st_imm_offset): New function.
548 (thumb_record_ld_st_reg_offset(): New function.
549 (thumb_record_add_sub_cmp_mov): New function.
550 (thumb_record_shift_add_sub): New function.
551 (arm_record_coproc_data_proc): New function.
552 (arm_record_coproc): New function.
553 (arm_record_b_bl): New function.
554 (arm_record_ld_st_multiple): New function.
555 (arm_record_ld_st_reg_offset): New function.
556 (arm_record_ld_st_imm_offset): New function.
557 (arm_record_data_proc_imm): New function.
558 (arm_record_data_proc_misc_ld_str): New function.
559 (arm_record_extension_space): New function.
560 (arm_record_strx): New function.
561 (sbo_sbz): New function.
562 (struct insn_decode_record): New structure for arm insn record.
563 (REG_ALLOC): New macro for reg allocations.
564 (MEM_ALLOC): New macro for memory allocations.
565 * arm-tdep.h (struct gdbarch_tdep): New field 'arm_swi_record'.
567 2012-03-27 Andreas Schwab <schwab@linux-m68k.org>
569 * m68klinux-nat.c (fetch_register): Fix strict-aliasing violation.
570 (store_register): Likewise.
572 2012-03-26 Oza Pawandeep <oza.pawandeep@gmail.com>
574 * MAINTAINERS (Write After Approval): Add myself to the list.
576 2012-03-25 Jan Kratochvil <jan.kratochvil@redhat.com>
578 * NEWS (set breakpoint condition-evaluation): Change "gdb" to "host".
579 Describe also the option "auto".
581 2012-03-22 Richard Henderson <rth@redhat.com>
583 * sparc-linux-nat.c (_initialize_sparc_linux_nat): Fix prototype.
584 * sparc-nat.c (sparc_xfer_wcookie): Make static.
586 2012-03-22 Richard Henderson <rth@redhat.com>
588 * jit.c (jit_read_code_entry): Compute alignment and offset of
589 int64_t member before computing entry_size.
591 2012-03-22 Siva Chandra Reddy <sivachandra@google.com>
593 Python scripting: Add new method Value.referenced_value to
594 gdb.Value which can dereference pointer as well as reference
596 * NEWS: Add entry under 'Python scripting' about the new method
597 Value.referenced_value on gdb.Value objects.
598 * python/py-value.c (valpy_referenced_value): New function
599 defining a new method on gdb.Value objects which can dereference
600 pointer and reference values.
602 2012-03-22 Siva Chandra Reddy <sivachandra@google.com>
604 * MAINTAINERS (Write After Approval): Add myself to the list.
606 2012-03-21 Kevin Buettner <kevinb@redhat.com>
608 * symtab.c (skip_prologue_sal): Change test to check for "main()"
609 in addition to "main".
611 2012-03-21 Joel Brobecker <brobecker@adacore.com>
613 * expression.h (op_name): Add declaration.
614 * expprint.c (op_name): Remove declaration. Make non-static.
615 * ax-gdb.c (gen_expr): Use op_name instead of op_string.
617 2012-03-21 Thomas Schwinge <thomas@codesourcery.com>
619 * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Use siginfo_t instead
621 * arm-linux-nat.c (arm_linux_stopped_data_address): Likewise.
622 * ia64-linux-nat.c (ia64_linux_stopped_data_address): Likewise.
623 * linux-nat.c (linux_nat_siginfo_fixup, siginfo_fixup)
624 (linux_xfer_siginfo, linux_nat_set_siginfo_fixup)
625 (linux_nat_get_siginfo): Likewise.
626 * linux-nat.h (struct lwp_info, linux_nat_set_siginfo_fixup)
627 (linux_nat_get_siginfo): Likewise.
628 * linux-tdep.c (linux_get_siginfo_type): Likewise.
629 * ppc-linux-nat.c (ppc_linux_stopped_data_address): Likewise.
630 * procfs.c (gdb_siginfo_t): Likewise.
632 2012-03-21 Mike Frysinger <vapier@gentoo.org>
634 * .gitignore: Ignore more files.
636 2012-03-20 Pedro Alves <palves@redhat.com>
638 * remote.c (remote_start_remote): Clear `rs->starting_up' on early
641 2012-03-20 Yao Qi <yao@codesourcery.com>
643 * amd64-tdep.c (amd64_displaced_step_copy_insn): Complete missing "}" in
646 2012-03-19 Jan Kratochvil <jan.kratochvil@redhat.com>
648 Code cleanupp: Use cu_offset and sect_offset compile time type checking.
649 * dwarf2expr.c (add_piece, dwarf_get_base_type, execute_stack_op)
650 (ctx_no_dwarf_call, ctx_no_get_base_type): Use cu_offset and
652 * dwarf2expr.h (cu_offset, sect_offset): New types.
653 (struct dwarf_expr_context_funcs) <dwarf_call>
654 (struct dwarf_expr_context_funcs) <get_base_type>: Use cu_offset and
656 (struct dwarf_expr_context) <len>: Improve the comment.
657 (struct dwarf_expr_piece, ctx_no_dwarf_call, ctx_no_get_base_type): Use
658 cu_offset and sect_offset.
659 * dwarf2loc.c (per_cu_dwarf_call, dwarf_expr_dwarf_call)
660 (dwarf_expr_get_base_type, needs_frame_dwarf_call)
661 (dwarf2_compile_expr_to_ax, disassemble_dwarf_expression): Likewise.
662 * dwarf2loc.h: Include dwarf2expr.h.
663 (dwarf2_fetch_die_location_block, dwarf2_get_die_type): Use cu_offset
665 * dwarf2read.c (struct dwarf2_per_objfile) <debug_types_type_hash>:
667 (struct comp_unit_head, struct dwarf2_cu, struct dwarf2_per_cu_data)
668 (struct signatured_type, struct line_header, struct partial_die_info)
669 (struct die_info, find_partial_die, dwarf2_get_ref_die_offset)
670 (lookup_signatured_type_at_offset, dwarf2_find_containing_comp_unit)
671 (get_die_type_at_offset, create_cus_from_index)
672 (create_signatured_type_table_from_index, dw2_get_file_names)
673 (offset_in_cu_p, read_comp_unit_head, error_check_comp_unit_head)
674 (read_and_check_comp_unit_head, read_and_check_type_unit_head)
675 (create_debug_types_hash_table, process_psymtab_comp_unit)
676 (load_partial_comp_unit, create_all_comp_units)
677 (partial_die_parent_scope, partial_die_full_name, skip_one_die)
678 (load_full_comp_unit, dwarf2_physname, read_import_statement)
679 (inherit_abstract_dies, read_func_scope, read_call_site_scope)
680 (dwarf2_add_member_fn, process_enumeration_scope, read_module_type)
681 (read_typedef, die_hash, die_eq, read_full_die, dwarf2_read_abbrevs)
682 (load_partial_dies, read_partial_die, find_partial_die_in_comp_unit)
683 (find_partial_die, read_attribute_value, lookup_die_type)
684 (dump_die_shallow, store_in_ref_table): Use cu_offset and sect_offset.
685 (is_ref_attr): New function comment.
686 (dwarf2_get_ref_die_offset): New function comment, new variable retval.
687 Use cu_offset and sect_offset.
688 (follow_die_offset, follow_die_ref, dwarf2_fetch_die_location_block)
689 (dwarf2_get_die_type, follow_die_sig, lookup_signatured_type_at_offset)
690 (load_full_type_unit, read_signatured_type, per_cu_header_read_in)
691 (dwarf2_find_containing_comp_unit, struct dwarf2_offset_and_type)
692 (offset_and_type_hash, offset_and_type_eq, set_die_type)
693 (get_die_type_at_offset, partial_die_hash, partial_die_eq)
694 (write_one_signatured_type, write_psymtabs_to_index): Use cu_offset and
697 2012-03-19 Jan Kratochvil <jan.kratochvil@redhat.com>
700 * python/py-auto-load.c (source_section_scripts): New variable back_to.
701 Turn fclose and xfree calls into make_cleanup_fclose and make_cleanup
703 (auto_load_objfile_script): Turn fclose into make_cleanup_fclose.
705 2012-03-19 Jan Kratochvil <jan.kratochvil@redhat.com>
707 * NEWS: Describe new options --init-command=FILE, -ix and
708 --init-eval-command=COMMAND, -iex.
709 * main.c (struct cmdarg): New enum items CMDARG_INIT_FILE and
711 (captured_main): New enum items OPT_IX and OPT_IEX. Add
712 "init-command", "init-eval-command", "ix" and "iex" to the variable
713 long_options. Handle OPT_IX and OPT_IEX. Process them from CMDARG_VEC.
714 New comment for CMDARG_FILE and CMDARG_COMMAND processing.
715 (print_gdb_help): Describe --init-command=FILE, -ix and
716 --init-eval-command=COMMAND, -iex.
718 2012-03-19 Jan Kratochvil <jan.kratochvil@redhat.com>
721 * main.c (struct cmdarg): Move it here from main. Add more comments.
722 (cmdarg_s, VEC (cmdarg_s)): New.
723 (main): Move struct cmdarg from here. New variables cmdarg_vec and
724 cmdarg_p. Remove variables cmdsize and ncmd and their initialization.
725 Install cleanup for cmdarg_vec. Update filling for options 'x' and
726 'X'. Replace cmdarg processing by cmdarg_vec processing. Remove xfree
729 2012-03-19 Tom Tromey <tromey@redhat.com>
731 * gnu-v3-abi.c (gnuv3_print_vtable): Initialize 'result_vec'.
733 2012-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
736 * dwarf2read.c (process_full_comp_unit): Set LOCATIONS_VALID only for
739 2012-03-16 Chris January <chris.january@allinea.com>
741 * tui-tui.win.c (tui_resize_all): Use erase and clearok instead
744 2012-03-16 Chris January <chris.january@allinea.com>
746 * source.c (add_path): Use memmove instead of strcpy because the
749 2012-03-16 Joel Brobecker <brobecker@adacore.com>
751 * value.h (set_value_parent): Add declaration.
752 * value.c (set_value_parent): New function.
753 (value_address): If VALUE->PARENT is not NULL, then use it as
754 the base address instead of VALUE->LOCATION.address.
755 * ada-lang.c (ada_value_primitive_packed_val): Keep V's address
756 the same as OBJ's address. Adjust V's offset accordingly.
759 2012-03-16 Gary Benson <gbenson@redhat.com>
762 * dwarf2read.c (use_deprecated_index_sections): New global.
763 (struct partial_die_info): New member may_be_inlined.
764 (read_partial_die): Set may_be_inlined where appropriate.
765 (add_partial_subprogram): Add partial symbols for partial
766 DIEs that may be inlined.
767 (new_symbol_full): Add inlined subroutines to the current
769 (write_psymtabs_to_index): Bump version number.
770 (dwarf2_read_index): Read only version 6 indices unless
771 use_deprecated_index_sections is set.
772 * linespec.c (symbol_and_data_callback): New structure.
773 (iterate_inline_only): New function.
774 (iterate_over_all_matching_symtabs): New argument
775 "include_inline". If nonzero, also call the callback for
776 symbols representing inlined subroutines.
777 (lookup_prefix_sym): Pass extra argument to the above.
778 (find_function_symbols): Likewise.
779 (add_matching_symbols_to_info): Likewise.
780 * NEWS: Mention that GDB can now set breakpoints on inlined
783 2012-03-16 Pierre Muller <muller@ics.u-strasbg.fr>
785 * p-typeprint.c (pascal_type_print_method_args):
786 Fix display of parameter of methods.
788 2012-03-16 Pierre Muller <muller@ics.u-strasbg.fr>
790 * amd64-windows-nat.c (_initialize_amd64_windows_nat):
791 Add missing prototype.
793 2012-03-16 Yao Qi <yao@codesourcery.com>
794 Jan Kratochvil <jan.kratochvil@redhat.com>
796 Fix false compilation warning.
797 * gnu-v3-abi.c (print_one_vtable): Initialize ADDR.
799 2012-03-15 Jonathan Larmour <jifl@eCosCentric.com>
800 Pedro Alves <pedro@codesourcery.com>
802 * arm-tdep.c: Include "remote.h" and "features/arm-with-m-fpa-layout.c".
803 (arm_register_g_packet_guesses): New function.
804 (arm_gdbarch_init): Don't force a target description with
805 registers when the executable is detected as M-profile. Instead
806 set gdbarch->tdep->is_m. Register `g' packet guesses.
807 (_initialize_arm_tdep): Initialize the new target description.
808 * features/arm-with-m-fpa-layout.xml: New description.
809 * features/arm-with-m-fpa-layout.c: New, generated.
811 2012-03-15 Joel Brobecker <brobecker@adacore.com>
813 * breakpoint.c (breakpoint_xfer_memory): Add assertion.
814 Update function description.
815 (insert_bp_location): Do not wipe bl->target_info out.
816 * mem-break.c: #include "gdb_string.h".
817 (default_memory_insert_breakpoint): Do not call target_read_memory
818 with a pointer to the breakpoint's shadow_contents buffer. Use
819 a local buffer instead.
820 * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
822 2012-03-15 Tom Tromey <tromey@redhat.com>
824 * NEWS: Mention "info vtbl", not "info vtable".
825 * cp-support.c (info_vtbl_command): Fix comment.
826 (_initialize_cp_support): Fix text.
828 2012-03-15 Tom Tromey <tromey@redhat.com>
830 * cp-valprint.c (cp_print_value_fields): Use
831 print_function_pointer_address for vtable slot.
833 2012-03-15 Tom Tromey <tromey@redhat.com>
835 * gnu-v3-abi.c (struct value_and_voffset): New.
836 (hash_value_and_voffset, eq_value_and_voffset)
837 (compare_value_and_voffset, compute_vtable_size)
838 (print_one_vtable, gnuv3_print_vtable): New functions.
839 (init_gnuv3_ops): Initialize 'print_vtable' field.
840 * cp-support.c (info_vtbl_command): New function.
841 (_initialize_cp_support): Add "info vtbl".
842 * cp-abi.h (cplus_print_vtable): Declare.
843 (struct cp_abi_ops) <print_vtable>: New field.
844 * cp-abi.c (cplus_print_vtable): New function.
847 2012-03-15 Tom Tromey <tromey@redhat.com>
849 * d-lang.c (d_language_defn) <la_iterate_over_symbols>: Set to
850 iterate_over_symbols.
852 2012-03-14 Doug Evans <dje@google.com>
854 * dwarf2read.c (dwarf_stack_op_name): Add DW_OP_GNU_encoded_addr,
855 DW_OP_GNU_parameter_ref.
857 2012-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
859 Fix double prompt of 'interpreter-exec mi'.
860 * mi/mi-interp.c (mi_execute_command_input_handler): New prototype.
861 (mi_interpreter_resume): use it.
862 (mi_execute_command_input_handler): New function.
863 * mi/mi-main.c (mi_execute_command): Move prompt printing to
864 mi_execute_command_input_handler.
866 2012-03-13 Josh Matthews <josh@joshmatthews.net> (tiny change)
868 * darwin-nat-info.c (_initialize_darwin_info_commands): Add
870 (darwin_debug_port_info): Make static.
871 * darwin-nat.c (_initialize_darwin_inferior): Add prototype.
872 * machoread.c (_initialize_machoread): Add prototype.
873 * i386-darwin-nat.c (i386_darwin_dr_set, i386_darwin_dr_get)
874 (i386_darwin_set_control, i386_darwin_get_control)
875 i386_darwin_dr_set_addr, i386_darwin_get_addr)
876 i386_darwin_get_status, i386_darwin_get_control):
877 Comment out with HW_WATCHPOINT_NOT_YET_ENABLED macro.
879 2012-03-13 Joel Brobecker <brobecker@adacore.com>
881 * ax-gdb.c (gen_usual_unary): Remove special handling of
884 2012-03-13 Joel Brobecker <brobecker@adacore.com>
886 * ax-gdb.c (gen_fetch): Add handling for TYPE_CODE_RANGE types.
888 2012-03-13 Joel Brobecker <brobecker@adacore.com>
890 * aix-thread.c (supply_fprs): Make more consistent with fill_fprs.
892 2012-03-13 Chris January <chris.january@allinea.com>
894 * aix-thread.c (fill_sprs): Store the floating point registers
895 at the correct offsets into vals.
897 2012-03-13 Doug Evans <dje@google.com>
899 * NEWS: Mention symbol-reloading has been deleted.
900 * symfile.c (symbol_reloading): Delete.
901 (show_symbol_reloading): Delete.
902 (_initialize_symfile): Delete set/show symbol-reloading.
904 * dwarf2read.c (load_partial_comp_unit): Defer adding cu to
905 read_in_chain until we have successfully read it in.
906 (load_full_comp_unit): Ditto.
907 (read_signatured_type): Add comment.
909 2012-03-13 Chris January <chris.january@allinea.com>
911 * stabsread.c (fix_common_block): Change type of valu argument
914 2012-03-13 Chris January <chris.january@allinea.com>
916 * rs6000-tdep.c (skip_prologue): Support the oril r29, r1, 0x0
919 2012-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
921 * common/linux-procfs.c (linux_proc_get_int): New, from
922 linux_proc_get_tgid, change its LWPID type to pid_t, add parameter
924 (linux_proc_get_tgid): Only call linux_proc_get_int.
925 (linux_proc_get_tracerpid): New.
926 (linux_proc_pid_has_state): New, from linux_proc_pid_is_zombie.
927 (linux_proc_pid_is_stopped, linux_proc_pid_is_zombie): Only call
928 linux_proc_pid_has_state.
929 * common/linux-procfs.h (linux_proc_get_tracerpid): New declaration.
930 * common/linux-ptrace.c: Include linux-procfs.h and buffer.h.
931 (linux_ptrace_attach_warnings): New.
932 * common/linux-ptrace.h (struct buffer, linux_ptrace_attach_warnings):
934 * linux-nat.c: Include exceptions.h, linux-ptrace.h and buffer.h.
935 (linux_nat_attach): New variables ex, buffer, message and message_s.
936 Wrap to_attach by TRY_CATCH and call linux_ptrace_attach_warnings.
938 2012-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
940 * Makefile.in (linux-ptrace.o): New.
941 * common/linux-procfs.c (linux_proc_pid_is_zombie): New,
943 * common/linux-procfs.h (linux_proc_pid_is_zombie): New declaration.
944 * common/linux-ptrace.c: New file.
945 * config/alpha/alpha-linux.mh (NATDEPFILES): Add linux-ptrace.o.
946 * config/arm/linux.mh: Likewise.
947 * config/i386/linux.mh: Likewise.
948 * config/i386/linux64.mh: Likewise.
949 * config/ia64/linux.mh: Likewise.
950 * config/m32r/linux.mh: Likewise.
951 * config/m68k/linux.mh: Likewise.
952 * config/mips/linux.mh: Likewise.
953 * config/pa/linux.mh: Likewise.
954 * config/powerpc/linux.mh: Likewise.
955 * config/powerpc/ppc64-linux.mh: Likewise.
956 * config/powerpc/spu-linux.mh: Likewise.
957 * config/s390/s390.mh: Likewise.
958 * config/sparc/linux.mh: Likewise.
959 * config/sparc/linux64.mh: Likewise.
960 * config/xtensa/linux.mh: Likewise.
961 * linux-nat.c (linux_lwp_is_zombie): Remove, move it to
962 common/linux-procfs.c.
963 (wait_lwp): Rename linux_lwp_is_zombie to linux_proc_pid_is_zombie.
965 2012-03-13 Hui Zhu <teawater@gmail.com>
966 Pedro Alves <palves@redhat.com>
968 * breakpoint.c (init_breakpoint_sal): New flags parameter. Handle
969 CREATE_BREAKPOINT_FLAGS_INSERTED.
970 (create_breakpoint_sal, create_breakpoints_sal)
971 (base_breakpoint_create_breakpoints_sal)
972 (tracepoint_create_breakpoints_sal)
973 (strace_marker_create_breakpoints_sal): New flags parameter. Pass
975 (break_command_1, handle_gnu_v3_exceptions, trace_command)
976 (ftrace_command, strace_command): Adjust.
977 (create_tracepoint_from_upload): Pass
978 CREATE_BREAKPOINT_FLAGS_INSERTED.
979 * breakpoint.h (enum breakpoint_create_flags): New.
980 (create_breakpoint): New flags parameter.
981 * mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust.
982 * python/py-breakpoint.c (bppy_init): Adjust.
983 * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust.
984 * spu-tdep.c (spu_catch_start): Adjust.
986 2012-03-13 Pedro Alves <palves@redhat.com>
987 Hui Zhu <teawater@gmail.com>
988 Yao Qi <yao@codesourcery.com>
990 * remote.c (struct remote_state): New field `starting_up'.
991 (remote_start_remote): Set and clear it.
992 (remote_can_download_tracepoint): If starting up, return false.
994 2012-03-13 Yao Qi <yao@codesourcery.com>
996 * inferior.h (struct inferior): Remove fields any_syscall_count,
997 syscalls_counts and total_syscalls_count. Move them to new
998 struct catch_syscall_inferior_data in breakpoint.c.
999 * breakpoint.c: Call DEF_VEC_I(int).
1000 (struct catch_syscall_inferior_data): New.
1001 (get_catch_syscall_inferior_data): New.
1002 (catch_syscall_inferior_data_cleanup): New.
1003 (insert_catch_syscall): Update to access data in
1004 struct catch_syscall_inferior_data.
1005 (insert_catch_syscall): Likewise.
1006 (remove_catch_syscall): Likewise.
1007 (remove_catch_syscall): Likewise.
1008 (is_syscall_catchpoint_enabled): Likewise.
1009 (add_catch_command): Likewise.
1010 (_initialize_breakpoint): Register cleanup.
1011 * breakpoint.h: Removed DEF_VEC_I(int).
1012 * dwarf2loc.c: Call DEF_VEC_I(int).
1013 * mi/mi-main.c: Likewise.
1015 2012-03-12 Mark Kettenis <kettenis@gnu.org>
1017 * inf-ptrace.c (inf_ptrace_post_attach): Make static.
1019 2012-03-12 Chris January <chris.january@allinea.com>
1021 * aix-thread.c (_initialize_aix_thread): Add prototype.
1022 * rs6000-nat.c (_initialize_rs6000_nat): Ditto.
1023 * xcoffsolib.c (_initialize_xcoffsolib): Ditto.
1025 2012-03-12 Joel Brobecker <brobecker@adacore.com>
1027 * amd64bsd-nat.c: Move #include of "amd64bsd-nat.h" after
1028 include of "amd64-nat.h".
1030 2012-03-12 Tom Tromey <tromey@redhat.com>
1032 * buildsym.c (record_pending_block): Now static.
1033 * buildsym.h: (record_pending_block): Remove.
1035 2012-03-12 Andreas Tobler <andreast@fgznet.ch>
1037 * amd64bsd-nat.c: Include amd64bsd-nat.h.
1039 2012-03-09 Tom Tromey <tromey@redhat.com>
1041 * dwarf2read.c (struct dwarf2_cu) <checked_producer,
1042 producer_is_gxx_lt_4_6>: New fields.
1043 (producer_is_gxx_lt_4_6): Use and update producer cache fields.
1045 2012-03-09 Tom Tromey <tromey@redhat.com>
1047 * dwarf2read.c (dwarf2_attr): Avoid tail-recursive call.
1049 2012-03-08 Joel Brobecker <brobecker@adacore.com>
1051 * ravenscar-sparc-thread.c (_initialize_ravenscar_sparc): Add
1054 2012-03-08 Joel Brobecker <brobecker@adacore.com>
1056 * ravenscar-thread.c (_initialize_ravenscar): Add prototype.
1058 2012-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1060 Fix -Wmissing-prototypes build.
1061 * arm-linux-nat.c (get_thread_id): Make it static.
1062 * xtensa-linux-nat.c (get_thread_id): Likewise.
1064 2012-03-08 Joel Brobecker <brobecker@adacore.com>
1066 * server.c (process_point_options): If a conditional expression
1067 is found, only print a message if remote_debug is nonzero.
1069 2012-03-08 Luis Machado <lgustavo@codesourcery.com>
1071 * ax-gdb.c (gen_fetch): Fail gracefully and use error instead
1072 of internal error for unknown/unsupported types.
1074 2012-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1076 Fix CU relative vs. absolute DIE offsets.
1077 * dwarf2loc.h (dwarf2_fetch_die_location_block): Rename parameter
1078 offset to offset_in_cu.
1079 * dwarf2read.c (process_enumeration_scope): Add CU offset to
1081 (dwarf2_fetch_die_location_block): Rename parameter offset to
1082 offset_in_cu. New variable offset, add CU offset to OFFSET_IN_CU.
1084 2012-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1086 * libunwind-frame.c: Rename to ...
1087 * ia64-libunwind-tdep.c: ... here.
1088 * libunwind-frame.h: Rename to ...
1089 * ia64-libunwind-tdep.h: ... here.
1090 * Makefile.in (HFILES_NO_SRCDIR): Rename libunwind-frame.h to
1091 ia64-libunwind-tdep.h.
1092 (ALLDEPFILES): Rename libunwind-frame.c to ia64-libunwind-tdep.c.
1093 * README (--with-libunwind): Rename to ...
1094 (--with-libunwind-ia64): ... here, note it is ia64 specific now.
1095 * config.in: Regenerate.
1096 * configure: Regenerate.
1097 * configure.ac: New option --with-libunwind-ia64, make the
1098 AS_HELP_STRING ia64 specific. Deprecate option --with-libunwind.
1099 Remove AC_DEFINE for HAVE_LIBUNWIND.
1100 * ia64-libunwind-tdep.c: Make the file top comment ia64 specific.
1101 Rename libunwind-frame.h #include to ia64-libunwind-tdep.h.
1102 Rename libunwind-frame in the general comment.
1103 * ia64-libunwind-tdep.h: Make the file top comment ia64 specific.
1104 Rename symbol LIBUNWIND_FRAME_H to IA64_TDEP_LIBUNWIND_FRAME_H.
1105 Move forward declarations inside #ifndef. Rename libunwind-frame in
1106 the general comment.
1107 * ia64-tdep.c: Rename libunwind-frame.h #include to
1108 ia64-libunwind-tdep.h.
1109 (ia64_gdb2uw_regnum, ia64_uw2gdb_regnum, ia64_is_fpreg)
1110 (ia64_libunwind_descr): Rename libunwind-frame to
1111 ia64-libunwind-tdep in these function comments.
1112 * ia64-tdep.h: Rename libunwind-frame.h #include to
1113 ia64-libunwind-tdep.h.
1114 * ia64-vms-tdep.c (ia64_vms_libunwind_descr): Rename libunwind-frame to
1115 ia64-libunwind-tdep in that data comment.
1117 2012-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1119 * libunwind-frame.h (struct frame_unwind): New declaration.
1121 2012-03-08 Joel Brobecker <brobecker@adacore.com>
1123 * breakpoint.c (_initialize_breakpoint): Fix error in help of
1124 "set breakpoint condition-evaluation" command.
1126 2012-03-08 Tristan Gingold <gingold@adacore.com>
1128 * sparc-stub.c: Move to stubs/
1129 * sh-stub.c: Likewise.
1130 * m68k-stub.c: Likewise.
1131 * m32r-stub.c: Likewise.
1132 * i386-stub.c: Likewise.
1134 2012-03-08 Andreas Schwab <schwab@linux-m68k.org>
1136 * m68klinux-tdep.c (m68k_linux_init_abi): Register
1137 linux_get_siginfo_type.
1139 * m68klinux-nat.c: Include "gdb_proc_service.h".
1140 (PTRACE_GET_THREAD_AREA): Define.
1141 (ps_get_thread_area): New function.
1143 2012-03-08 Yao Qi <yao@codesourcery.com>
1145 * remote.c (remote_get_noisy_reply): Replace `sprintf' with
1147 (remote_query_attached): Likewise.
1148 (remote_static_tracepoint_marker_at): Likewise.
1149 (remote_set_permissions): Likewise.
1150 (remote_detach_1, extended_remote_attach_1): Likewise.
1151 (send_g_packet, remote_vkill): Likewise.
1152 (extended_remote_disable_randomization): Likewise.
1153 (remote_add_target_side_condition): Likewise.
1154 (remote_insert_breakpoint): Likewise.
1155 (remote_remove_breakpoint): Likewise.
1156 (remote_insert_watchpoint): Likewise.
1157 (remote_remove_watchpoint): Likewise.
1158 (remote_insert_hw_breakpoint): Likewise.
1159 (remote_insert_hw_breakpoint): Likewise.
1160 (remote_remove_hw_breakpoint): Likewise.
1161 (remote_download_command_source): Likewise.
1162 (remote_download_tracepoint): Likewise.
1163 (remote_download_trace_state_variable): Likewise.
1164 (remote_disable_tracepoint): Likewise.
1165 (remote_trace_set_readonly_regions): Likewise.
1166 (remote_get_tracepoint_status): Likewise.
1167 (remote_trace_find): Likewise.
1168 (remote_get_trace_state_variable_value): Likewise.
1169 (remote_set_disconnected_tracing): Likewise.
1170 (remote_set_circular_trace_buffer): Likewise.
1171 (remote_get_min_fast_tracepoint_insn_len): Likewise.
1172 (remote_use_agent): Likewise.
1173 (remote_add_target_side_condition): Add one parameter BUF_SIZE.
1176 2012-03-07 Pedro Alves <palves@redhat.com>
1178 * NEWS: Mention QProgramSignals.
1179 * inferior.h (update_signals_program_target): Declare.
1180 * infrun.c: (update_signals_program_target): New.
1181 (handle_command): Update the target of the new program signals
1183 * remote.c (PACKET_QProgramSignals): New enum.
1184 (last_program_signals_packet): New global.
1185 (remote_program_signals): New.
1186 (remote_start_remote): Update the target with the program signals
1188 (remote_protocol_features): Add entry for QPassSignals.
1189 (remote_open_1): Free anc clear last_program_signals_packet.
1190 (init_remote_ops): Install remote_program_signals.
1191 * target.c (update_current_target): Adjust.
1192 (target_program_signals): New.
1193 * target.h (struct target_ops) <to_program_signals>: New field.
1194 (target_program_signals): Declare.
1196 2012-03-07 Pedro Alves <palves@redhat.com>
1198 * NEWS: Add subtitle for new z0/z1 conditional breakpoint
1201 2012-03-07 Andreas Schwab <schwab@linux-m68k.org>
1203 * m68klinux-nat.c (getregs_supplies): Make static.
1204 (getfpregs_supplies): Likewise.
1205 (have_ptrace_getregs): Likewise.
1207 2012-03-06 Joel Brobecker <brobecker@adacore.com>
1209 * dwarf2read.c (dwarf2_get_die_type): Pass absolute offset
1210 in call to get_die_type_at_offset.
1212 2012-03-06 Stan Shebs <stan@codesourcery.com>
1214 * mi/mi-cmd-break.c: Enforce coding standards, fix comments.
1215 * mi/mi-cmd-disas.c: Ditto.
1216 * mi/mi-cmd-env.c: Ditto.
1217 * mi/mi-cmd-file.c: Ditto.
1218 * mi/mi-cmd-stack.c: Ditto.
1219 * mi/mi-cmd-target.c: Ditto.
1220 * mi/mi-cmd-var.c: Ditto.
1221 * mi/mi-cmds.c: Ditto.
1222 * mi/mi-cmds.h: Ditto.
1223 * mi/mi-console.c: Ditto.
1224 * mi/mi-getopt.c: Ditto.
1225 * mi/mi-getopt.h: Ditto.
1226 * mi/mi-interp.c: Ditto.
1227 * mi/mi-main.c: Ditto.
1228 * mi/mi-out.c: Ditto.
1229 * mi/mi-parse.c: Ditto.
1230 * mi/mi-parse.h: Ditto.
1231 * mi/mi-symbol-cmds.c: Ditto.
1233 * mi/mi-getopt.h: Move mi_opt struct up.
1234 * mi/mi-main.c (captured_mi_execute_command): Remove redundant
1236 * mi/mi-out.c (_initialize_mi_out): Remove empty initialize.
1238 2012-03-06 Tom Tromey <tromey@redhat.com>
1240 * proc-service.c (ps_pglobal_lookup): Set the current program
1243 2012-03-06 Pedro Alves <palves@redhat.com>
1245 * gregset.h [HAVE_SYS_PROCFS_H]: Include <sys/procfs.h>.
1247 2012-03-05 Joel Brobecker <brobecker@adacore.com>
1249 * MAINTAINERS: List Maciej W. Rozycki as the mips maintainer.
1251 2012-03-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1254 * common/linux-osdata.c (linux_common_core_of_thread): New function
1256 * linux-nat.c (linux_nat_wait_1): Replace linux_nat_core_of_thread_1
1257 call by linux_common_core_of_thread.
1258 (linux_nat_core_of_thread_1): Remove.
1259 * linux-nat.h (linux_nat_core_of_thread_1): Remove declaration.
1260 * linux-thread-db.c: Include linux-osdata.h.
1261 (update_thread_core): Replace linux_nat_core_of_thread_1 call by
1262 linux_common_core_of_thread.
1264 2012-03-05 Tom Tromey <tromey@redhat.com>
1266 * value.c (value_primitive_field): Don't fetch contents for
1269 2012-03-05 Tom Tromey <tromey@redhat.com>
1271 * jv-valprint.c (java_value_print): Correctly compute 'obj_addr'.
1273 2012-03-05 Andreas Arnez <arnez@linux.vnet.ibm.com>
1275 * s390-nat.c: Include "gregset.h".
1277 2012-03-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1279 * libunwind-frame.c (LIBUNWIND_SO): Change .7 to .8.
1280 [!LIBUNWIND_SO] (LIBUNWIND_SO_7): New #define.
1281 (libunwind_load): New variable so_error, use it for dlerror. Try to
1282 load also LIBUNWIND_SO_7.
1284 2012-03-05 Pedro Alves <palves@redhat.com>
1286 * i387-tdep.c (i387_supply_xsave): Assert the xsave section buffer
1287 is not NULL, and remove resulting dead code.
1289 2012-03-05 Thomas Schwinge <thomas@codesourcery.com>
1291 * sh-tdep.c (sh_skip_prologue): Provide an upper limit on the function
1292 prologue to sh_analyze_prologue.
1293 (sh_analyze_prologue): Make better use of such an upper limit, and
1294 generally be more cautious about accessing memory.
1296 2012-03-05 Tom Tromey <tromey@redhat.com>
1298 * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Rename from
1299 _initialize_ia64_hpux_tdep.
1301 2012-03-05 Pedro Alves <palves@redhat.com>
1305 * i387-tdep.c (i387_supply_xsave): If we have an xsave buffer, and
1306 the register state is clear, supply explicit zero, instead of
1307 marking the register unavailable.
1309 2012-03-05 Tristan Gingold <gingold@adacore.com>
1311 * NEWS: Mention OpenVMS ia64 new target.
1313 2012-03-05 Tristan Gingold <gingold@adacore.com>
1315 * ia64-tdep.h: Include libunwind-frame.h and libunwind-ia64.h.
1316 (ia64_unw_accessors, ia64_unw_rse_accessors)
1317 (ia64_libunwind_descr): Declare.
1318 * ia64-vms-tdep.c: New file.
1319 * ia64-tdep.c (ia64_unw_accessors, ia64_unw_rse_accessors)
1320 (ia64_libunwind_descr): Make them public.
1321 * configure.tgt: Add ia64-*-*vms*.
1322 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-vms-tdep.o
1323 (ALLDEPFILES): Add ia64-vms-tdep.c
1325 2012-03-05 Tristan Gingold <gingold@adacore.com>
1327 * target.h (target_object): Add TARGET_OBJECT_OPENVMS_UIB.
1328 * remote.c (PACKET_qXfer_uib): New enum value.
1329 (remote_protocol_features): Add entry for PACKET_qXfer_uib.
1330 (remote_xfer_partial): Handle TARGET_OBJECT_OPENVMS_UIB.
1331 (_initialize_remote): Call add_packet_config_cmd for
1334 2012-03-05 Tristan Gingold <gingold@adacore.com>
1336 * osabi.c (gdb_osabi_names): Add OpenVMS.
1337 (generic_elf_osabi_sniffer): Likewise.
1338 * defs.h (gdb_osabi): Add GDB_OSABI_OPENVMS.
1340 2012-03-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1342 Removed unused code.
1343 * libunwind-frame.c (libunwind_frame_unwind)
1344 (libunwind_frame_base_address): Remove.
1345 * libunwind-frame.h (libunwind_frame_base_address): Remove declaration.
1347 2012-03-04 Yao Qi <yao@codesourcery.com>
1349 * common/agent.c (gdb_connect_sync_socket): Add _ markup and
1350 remove trailing new line.
1351 (agent_run_command, agent_run_command): Add _ markup.
1352 (agent_capability_check): Likewise.
1354 2012-03-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1356 * breakpoint.c (set_condition_evaluation_mode): Set
1357 CONDITION_EVALUATION_MODE unconditionally.
1359 2012-03-03 Yao Qi <yao@codesourcery.com>
1361 * common/agent.c (agent_look_up_symbols): Add one parameter 'arg'.
1362 * common/agent.h: Update declaration.
1363 * inf-child.c (inf_child_use_agent): New.
1364 (inf_child_can_use_agent): New.
1365 (inf_child_target): Initialize fields `to_use_agent'
1366 and `to_can_use_agent'.
1367 * agent.c (agent_new_objfile): New.
1368 (_initialize_agent): Add agent_new_objfile to new_objfile
1371 * linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
1373 (linux_target_install_ops): Initialize field
1374 `to_static_tracepoint_markers_by_strid'.
1375 * remote.c (free_current_marker): Move it to ...
1376 * tracepoint.c (free_current_marker): ... here. New.
1377 (cleanup_target_stop): New.
1378 * tracepoint.h: Declare free_current_marker.
1379 * NEWS: Add one entry about `info static-tracepoint-marker'.
1381 2012-03-03 Yao Qi <yao@codesourcery.com>
1383 * common/agent.c (agent_loaded_p): New.
1384 (agent_look_up_symbols): New global.
1385 * common/agent.h: Declare agent_loaded_p.
1387 2012-03-03 Yao Qi <yao@codesourcery.com>
1389 * common/agent.c (struct ipa_sym_addresses) <addr_capability>: New.
1390 (agent_capability_check, agent_capability_invalidate): New.
1391 (symbol_list): New array element.
1392 * common/agent.h (enum agent_capa): New.
1393 * target.c (target_pre_inferior): Call agent_capability_invalidate.
1395 2012-03-03 Yao Qi <yao@codesourcery.com>
1397 * target.h (struct target_ops) <to_use_agent>: New field.
1398 (struct target_ops) <to_can_use_agent>: New field.
1399 (target_use_agent, target_can_use_agent): New macro.
1400 * target.c (update_current_target): Update.
1401 * remote.c: New enum `PACKET_QAgent'.
1402 (remote_protocol_features): Add a new element.
1403 (remote_use_agent, remote_can_use_agent): New.
1404 (init_remote_ops): Initialize field `can_use_agent' with
1405 remote_can_use_agent. Intiailize field `use_agent' with
1407 * common/agent.c (use_agent): New global.
1408 * common/agent.h: Declare it.
1409 * tracepoint.c (info_static_tracepoint_markers_command): Add
1411 * Makefile.in (SFILES): Add common/agent.c and agent.c.
1412 (COMMON_OBS): Add common/agent.o and agent.o
1413 (common-agent.o): New rule.
1416 2012-03-03 Yao Qi <yao@codesourcery.com>
1418 * common/agent.c: New.
1419 * common/agent.h: New.
1420 * configure.ac: Add `sys/socket.h' and `sys/un.h' to
1422 * configure, configh.in: Regenerated.
1424 2012-03-02 Kevin Buettner <kevinb@redhat.com>
1426 * sh-tdep.c (sh_frame_cache): Don't fetch the FPSCR register
1427 unless it exists for this architecture.
1429 2012-03-02 Joel Brobecker <brobecker@adacore.com>
1431 * language.h (struct language_defn): New "method" la_read_var_value.
1432 * findvar.c: #include "language.h".
1433 (default_read_var_value): Renames read_var_value. Rewrite
1434 function description.
1435 (read_var_value): New function.
1436 * value.h (default_read_var_value): Add prototype.
1437 * ada-lang.c (ada_read_renaming_var_value, ada_read_var_value):
1439 (ada_language_defn): Add entry for la_read_var_value.
1440 * c-lang.c, d-lang.c, f-lang.c, jv-lang.c, language.c,
1441 * m2-lang.c, objc-lang.c, opencl-lang.c, p-lang.c: Update
1442 language_defn structures to add entry for new la_read_var_value
1445 2012-03-02 Tom Tromey <tromey@redhat.com>
1446 Pedro Alves <palves@redhat.com>
1448 PR breakpoints/13776:
1449 * breakpoint.c (breakpoint_init_inferior): Delete step-resume
1451 (delete_longjmp_breakpoint_at_next_stop): New.
1452 * breakpoint.h (delete_longjmp_breakpoint_at_next_stop): Declare.
1453 * target.c (generic_mourn_inferior): Call mark_breakpoints_out
1454 before deleting the inferior. Add comments.
1455 * thread.c (clear_thread_inferior_resources): Don't delete lonjmp
1456 breakpoints immediately, but only on next stop. Move that code
1457 next to where we mark other breakpoints for deletion.
1459 2012-03-02 Joel Brobecker <brobecker@adacore.com>
1461 * mips-linux-nat.c (mips_linux_read_description): Add missing i18n
1463 * mips-tdep.c (mips_linux_reg_names): Improve comment to avoid ARI
1466 2012-03-02 Pedro Alves <palves@redhat.com>
1468 * linux-thread-db.c (attach_thread): Avoid in_thread_list call.
1470 2012-03-02 Ulrich Weigand <uweigand@de.ibm.com>
1472 Fix -Wmissing-prototypes build.
1473 * ppc-linux-nat.c (ppc_linux_get_hwcap): Make static.
1474 * remote-sim.c (gdbsim_has_all_memory): Likewise.
1475 (gdbsim_has_memory): Likewise.
1477 2012-03-02 Yao Qi <yao@codesourcery.com>
1479 Fix -Wmissing-prototypes build.
1480 * charset.c (phony_iconv_open): Make static.
1481 (phony_iconv_close, phony_iconv): Likewise.
1482 * i386-linux-nat.c (_initialize_i386_linux_nat): New prototype.
1483 * i386-windows-nat.c (_initialize_i386_windows_nat): New
1485 * mingw-hdep.c (_initialize_mingw_hdep): New prototype.
1486 * ser-mingw.c (create_select_thread): Make static.
1487 * windows-termcap.c (tgetent): New prototype.
1488 (tgetnum, tgetflag, tgetstr, tputs, tgoto): Likewise.
1490 2012-03-02 Zhang Yuanhui <asmwarrior@gmail.com>
1492 Fix -Wmissing-prototypes build.
1493 * windows-nat.c (dll_symbol_command, ctrl_c_handler): Make them static.
1494 (_initialize_windows_nat, _initialize_check_for_gdb_ini)
1495 (_initialize_loadable): New prototypes.
1497 2012-03-02 Doug Evans <dje@google.com>
1499 * dwarf2read.c (load_full_comp_unit): Remove unnecessary reading of
1500 abbrev table, read_comp_unit will do it.
1502 2012-03-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1504 Fix -Wmissing-prototypes build.
1505 * alpha-tdep.c (alpha_deal_with_atomic_sequence): Make it static.
1506 * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): New prototype.
1507 * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Likewise.
1508 * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code): Make it static.
1509 (_initialize_arm_symbian_tdep): New prototype.
1510 * arm-wince-tdep.c (arm_wince_skip_main_prologue): Make it static.
1511 * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): New prototype.
1512 * i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Make it
1514 * lm32-tdep.c (_initialize_lm32_tdep): New prototype.
1515 * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): New
1517 * microblaze-tdep.c (microblaze_debug, microblaze_fetch_instruction)
1518 (microblaze_skip_prologue, microblaze_frame_cache): Make them static.
1519 * mips-linux-tdep.c (mips_linux_regset_from_core_section): Make it
1521 * moxie-tdep.c (moxie_process_record): Likewise.
1522 * remote-mips.c (mips_can_use_watchpoint, mips_insert_watchpoint)
1523 (mips_remove_watchpoint, mips_stopped_by_watchpoint): Make them static.
1524 * rl78-tdep.c (rl78_breakpoint_from_pc): Make it static.
1525 (_initialize_rl78_tdep): New prototype.
1526 * rx-tdep.c (rx_breakpoint_from_pc): Make it static.
1527 (_initialize_rx_tdep): New prototype.
1528 * solib-darwin.c (darwin_in_dynsym_resolve_code): Make it static.
1529 (_initialize_darwin_solib): New prototype.
1530 * solib-spu.c: Include solib-spu.h.
1531 (_initialize_spu_solib): New prototype.
1532 * spu-multiarch.c (_initialize_spu_multiarch): New prototype.
1533 * tic6x-tdep.c (tic6x_analyze_prologue, tic6x_skip_prologue)
1534 (tic6x_breakpoint_from_pc, tic6x_frame_unwind_cache)
1535 (tic6x_software_single_step): Make it static.
1536 (_initialize_tic6x_tdep): New prototype.
1538 2012-03-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1540 Fix -Wmissing-prototypes build.
1541 * cris-tdep.c (cris_can_use_hardware_watchpoint)
1542 (cris_region_ok_for_watchpoint, cris_stopped_data_address): Remove.
1544 2012-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1546 Fix -Wmissing-prototypes build.
1547 * frv-tdep.c (frv_check_watch_resources, frv_stopped_data_address)
1548 (frv_have_stopped_data_address): Remove.
1550 2012-03-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1552 Fix -Wmissing-prototypes build.
1553 * Makefile.in (HFILES_NO_SRCDIR): Add sh64-tdep.h.
1554 * sh-tdep.c: Include sh64-tdep.h.
1555 * sh-tdep.h (sh64_gdbarch_init, sh64_show_regs): Remove declarations.
1556 * sh64-tdep.c: Include sh64-tdep.h.
1557 * sh64-tdep.h: New file.
1559 2012-03-01 Maciej W. Rozycki <macro@codesourcery.com>
1561 * mips-tdep.c (mips32_scan_prologue): Correct indentation.
1563 2012-03-01 Maciej W. Rozycki <macro@codesourcery.com>
1565 * mips-tdep.c (mips_gdbarch_init): Only set pc_regnum and
1566 sp_regnum once the gdbarch_init_osabi hook has been called.
1568 2012-03-01 Maciej W. Rozycki <macro@codesourcery.com>
1570 * mips-tdep.c (mips32_bc1_pc): New function.
1571 (mips32_next_pc): Handle BC1ANY2F, BC1ANY2T, BC1ANY4F, BC1ANY4T,
1572 BPOSGE32 and BPOSGE64 instructions.
1573 (deal_with_atomic_sequence): Likewise.
1574 (mips32_instruction_has_delay_slot): Likewise.
1576 2012-03-01 Maciej W. Rozycki <macro@mips.com>
1577 Chris Dearman <chris@mips.com>
1578 Maciej W. Rozycki <macro@codesourcery.com>
1579 Joseph Myers <joseph@codesourcery.com>
1581 * features/mips-dsp.xml: New file.
1582 * features/mips64-dsp.xml: New file.
1583 * features/mips-dsp-linux.xml: New file.
1584 * features/mips64-dsp-linux.xml: New file.
1585 * features/Makefile (WHICH): Add mips-dsp-linux and
1587 (mips-dsp-expedite, mips64-dsp-expedite): New variables.
1588 * features/mips-dsp-linux.c: New file.
1589 * features/mips64-dsp-linux.c: New file.
1590 * regformats/mips-dsp-linux.dat: New file.
1591 * regformats/mips64-dsp-linux.dat: New file.
1592 * mips-linux-nat.c (mips_linux_register_addr): Handle DSP
1594 (mips64_linux_register_addr): Likewise.
1595 (mips64_linux_regsets_fetch_registers): Likewise.
1596 (mips64_linux_regsets_store_registers): Likewise.
1597 (mips64_linux_fetch_registers): Update call to
1598 mips64_linux_regsets_fetch_registers.
1599 (mips64_linux_store_registers): Update call to
1600 mips64_linux_regsets_store_registers.
1601 (mips_linux_read_description): Probe for DSP registers.
1602 (_initialize_mips_linux_nat): Call initialize_tdesc_mips_dsp_linux
1603 and initialize_tdesc_mips64_dsp_linux.
1604 * mips-linux-tdep.c (supply_gregset, mips64_supply_gregset):
1605 Remove padding of no longer used embedded register slots.
1606 * mips-linux-tdep.h (DSP_BASE, DSP_CONTROL): New macros.
1607 (MIPS_RESTART_REGNUM): Redefine enum value.
1608 * mips-tdep.c (mips_generic_reg_names): Remove trailing null
1610 (mips_tx39_reg_names): Likewise.
1611 (mips_linux_reg_names): New array of register names for Linux
1613 (mips_register_name): Check for a null pointer in
1614 mips_processor_reg_names and return an empty string.
1615 (mips_register_type): Exclude embedded registers for the IRIX
1617 (mips_pseudo_register_type): Likewise. Use dynamic numbers to
1618 refer to FP registers, LO, HI, BadVAddr, Cause and PC. Handle
1620 (mips_stab_reg_to_regnum): Handle DSP accumulators.
1621 (mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
1622 (mips_gdbarch_init): Likewise. Initialize internal register
1623 indices for the Linux ABI. Use dynamic numbers to refer to
1624 registers, as applicable, while parsing the target description.
1625 * mips-tdep.h (struct mips_regnum): Add dspacc/dspctl offsets.
1627 2012-03-01 Joel Brobecker <brobecker@adacore.com>
1629 * frame.h (read_frame_register_unsigned): Fix typo in function
1632 2012-03-01 Pedro Alves <palves@redhat.com>
1634 * jit-reader.in [!__cplusplus]
1635 (GDB_DECLARE_GPL_COMPATIBLE_READER): Add missing backslash.
1637 2012-03-01 Pedro Alves <palves@redhat.com>
1639 * configure.ac (build_warnings): Add -Wmissing-prototypes.
1640 * configure: Regenerate.
1642 2012-03-01 Pedro Alves <palves@redhat.com>
1644 * amd64-linux-tdep.c (amd64_linux_record_signal): Make static.
1645 * breakpoint.c (create_exception_master_breakpoint, trace_command)
1646 (ftrace_command, strace_command): Make static.
1647 * d-lang.c (_initialize_d_language): Declare.
1648 * dwarf2expr.c (_initialize_dwarf2expr): Declare.
1649 * dwarf2loc.c (_initialize_dwarf2loc):
1650 * dwarf2read.c (process_psymtab_comp_unit): Make static.
1651 * exec.c (exec_get_section_table): Make static.
1652 * i386-linux-tdep.c (i386_linux_record_signal): Make static.
1653 * infcmd.c (ensure_valid_thread, ensure_not_tfind_mode): Make static.
1654 * inferior.c (remove_inferior_command, add_inferior_command)
1655 (clone_inferior_command): Make static.
1656 * linux-nat.c (linux_nat_thread_address_space)
1657 (linux_nat_core_of_thread): Make static.
1658 * linux-tdep.c (_initialize_linux_tdep): Declare.
1659 * objc-lang.c (_initialize_objc_lang): Declare.
1660 * opencl-lang.c (builtin_opencl_type, opencl_language_arch_info):
1662 (_initialize_opencl_language): Declare.
1663 * record.c (_initialize_record): Declare.
1664 * remote.c (demand_private_info, remote_get_tib_address)
1665 (remote_supports_cond_tracepoints)
1666 (remote_supports_fast_tracepoints, remote_get_tracepoint_status):
1668 * skip.c (_initialize_step_skip): Declare.
1669 * symtab.c (skip_prologue_using_lineinfo): Make static.
1670 * tracepoint.c (delete_trace_state_variable)
1671 (trace_variable_command, delete_trace_variable_command)
1672 (get_uploaded_tsv, find_matching_tracepoint_location)
1673 (find_matching_tsv, create_tsv_from_upload, get_traceframe_info):
1675 * value.c (pack_unsigned_long): Make static.
1676 * varobj.c (varobj_ensure_python_env): Make static.
1677 * windows-tdep.c (_initialize_windows_tdep): Declare.
1678 * xml-syscall.c (make_cleanup_free_syscalls_info): Make static.
1680 2012-03-01 Pedro Alves <palves@redhat.com>
1682 * linux-tdep.c (linux_has_shared_address_space): Make static. Add
1684 (linux_init_abi): Install it as has_shared_address_space gdbarch
1687 2012-03-01 Pedro Alves <palves@redhat.com>
1689 * observer.c (observer_test_first_notification_function)
1690 (observer_test_second_notification_function)
1691 (observer_test_third_notification_function): Add declarations.
1693 2012-03-01 Pedro Alves <palves@redhat.com>
1695 * common/signals.c (default_target_signal_to_host)
1696 (default_target_signal_from_host): Move ...
1697 * arch-utils.c: ... here.
1698 * arch-utils.h (default_target_signal_to_host)
1699 (default_target_signal_from_host): Declare.
1701 * common/signals.c (target_signal_from_command): Move ...
1702 * infrun.c: ... here.
1703 * inferior.h (target_signal_from_command): Declare.
1704 * target.h (target_signal_from_command)
1705 (default_target_signal_from_host, default_target_signal_to_host):
1706 Delete declarations.
1708 * common/signals.c (_initialize_signals): Delete.
1710 2012-03-01 Pedro Alves <palves@redhat.com>
1712 * jit-reader.in (plugin_is_GPL_compatible): Add declarations for
1713 both __cplusplus and !__cplusplus.
1715 2012-03-01 Pedro Alves <palves@redhat.com>
1717 * psymtab.c (find_and_open_source): Delete declaration.
1718 * source.c (find_and_open_source): Move comment ...
1719 * source.h (find_and_open_source): ... to this new declaration.
1721 2012-03-01 Pedro Alves <palves@redhat.com>
1723 * inline-frame.c: Include inline-frame.h.
1725 2012-03-01 Pedro Alves <palves@redhat.com>
1727 * tui/tui-data.c (set_gen_win_origin): Delete.
1728 * tui/tui-data.h (tui_set_gen_win_origin): Delete declaration.
1729 * tui/tui-regs.c (tui_last_reg_element_no_in_line): Delete.
1731 2012-03-01 Pedro Alves <palves@redhat.com>
1733 * remote.c (encode_actions): Delete declaration.
1734 * tracepoint.c (encode_actions): Make extern.
1735 * tracepoint.h (encode_actions): Declare.
1737 2012-03-01 Pedro Alves <palves@redhat.com>
1739 * python/py-breakpoint.c: Include python.h.
1740 * python/py-continueevent.c (create_continue_event_object): Make
1742 * python/py-lazy-string.c (stpy_get_type): Make static.
1743 * python/py-newobjfileevent.c (create_new_objfile_event_object):
1745 * python/py-utils.c (unicode_to_target_python_string): Make
1747 * python/py-value.c: Include python.h.
1749 2012-03-01 Pedro Alves <palves@redhat.com>
1751 * inferior.c (delete_threads_of_inferior): Delete.
1753 2012-03-01 Pedro Alves <palves@redhat.com>
1755 Import fallback definitions from glibc.
1757 * gdb_proc_service.h [!HAVE_PROC_SERVICE_H] (struct
1758 ps_prochandle): Forward declare.
1759 (ps_err_e): Use glibc's comments.
1760 [!HAVE_PROC_SERVICE_H] (ps_pdread, ps_pdwrite, ps_ptread)
1761 (ps_ptwrite, ps_lgetregs, ps_lsetregs, ps_lgetfpregs)
1762 (ps_lsetfpregs, ps_getpid, ps_get_thread_area, ps_pglobal_lookup)
1763 (ps_pstop, ps_pcontinue, ps_lstop, ps_lcontinue, ps_lgetxregsize)
1764 (ps_lgetxregs, ps_lsetxregs, ps_plog): Declare.
1765 (struct ps_prochandle): Adjust comment.
1767 2012-03-01 Pedro Alves <palves@redhat.com>
1769 * ada-lang.c (ada_modulus_from_name): Delete.
1770 * ada-lex.l (lexer_init): Make static.
1772 2012-03-01 Pedro Alves <palves@redhat.com>
1776 * frame.c (read_frame_register_unsigned): New.
1777 * frame.h (read_frame_register_unsigned): Declare.
1778 * i387-tdep.c (print_i387_status_word): New parameter `status_p'.
1780 (print_i387_control_word): New parameter `control_p'. Handle it.
1781 (i387_print_float_info): Handle unavailable float registers.
1783 2012-03-01 Keith Seitz <keiths@redhat.com>
1785 * linespec.c (decode_line_2): Sort the list of methods
1786 alphabetically before presenting the user with a selection
1789 2012-03-01 Doug Evans <dje@google.com>
1791 * dwarf2read.c (dwarf2_cu): Remove unused members has_form_ref_addr,
1793 (dwarf2_read_abbrevs): Remove corresponding initialization.
1795 2012-03-01 Scott J. Goldman <scottjg@vmware.com>
1797 * NEWS: Mention new python command class gdb.COMMAND_USER.
1798 * cli/cli-cmds.c (show_user): Print error when used on a python
1800 (init_cli_cmds): Update documentation strings for "show user" and
1801 "set/show max-user-call-depth" to clarify that it does not apply to
1803 * python/py-cmd.c (cmdpy_init): Treat class_user as a valid class in
1805 (gdbpy_initialize_commands): Add COMMAND_USER as a constant in
1807 * top.c (execute_command): Only execute a user-defined command as a
1808 legacy macro if c->user_commands is set.
1810 2012-03-01 Tom Tromey <tromey@redhat.com>
1812 * valprint.h (struct generic_val_print_decorations): New.
1813 (generic_val_print): Declare.
1814 * valprint.c (generic_val_print): New function.
1815 * p-valprint.c (p_decorations): New global.
1816 (pascal_val_print) <TYPE_CODE_REF, TYPE_CODE_ENUM,
1817 TYPE_CODE_FLAGS, TYPE_CODE_FUNC, TYPE_CODE_RANGE, TYPE_CODE_INT,
1818 TYPE_CODE_FLT, TYPE_CODE_VOID, TYPE_CODE_ERROR, TYPE_CODE_UNDEF,
1819 TYPE_CODE_BOOL, TYPE_CODE_CHAR>: Call generic_val_print.
1820 * m2-valprint.c (m2_decorations): New global.
1821 (m2_val_print) <TYPE_CODE_REF, TYPE_CODE_ENUM, TYPE_CODE_FUNC,
1822 TYPE_CODE_BOOL, TYPE_CODE_RANGE, TYPE_CODE_INT, TYPE_CODE_CHAR,
1823 TYPE_CODE_FLT, TYPE_CODE_METHOD, TYPE_CODE_VOID, TYPE_CODE_UNDEF,
1824 TYPE_CODE_ERROR>: Call generic_val_print.
1825 * f-valprint.c (f_decorations): New global.
1826 (f_val_print): Use print_function_pointer_address.
1827 <TYPE_CODE_REF, TYPE_CODE_FUNC, TYPE_CODE_CHAR, TYPE_CODE_FLAGS,
1828 TYPE_CODE_FLT, TYPE_CODE_VOID, TYPE_CODE_ENUM, TYPE_CODE_RANGE,
1829 TYPE_CODE_BOOL, TYPE_CODE_COMPLEX, TYPE_CODE_UNDEF>: Call
1831 * c-valprint.c (c_decorations): New global.
1832 (c_val_print) <TYPE_CODE_MEMBERPTR, TYPE_CODE_REF, TYPE_CODE_ENUM,
1833 TYPE_CODE_FLAGS, TYPE_CODE_FUNC, TYPE_CODE_METHOD, TYPE_CODE_BOOL,
1834 TYPE_CODE_RANGE, TYPE_CODE_CHAR, TYPE_CODE_FLT,
1835 TYPE_CODE_DECFLOAT, TYPE_CODE_VOID, TYPE_CODE_ERROR,
1836 TYPE_CODE_UNDEF, TYPE_CODE_COMPLEX>: Call generic_val_print.
1837 * ada-valprint.c (ada_val_print_1) <TYPE_CODE_FLAGS>: Remove
1840 2012-03-01 Tom Tromey <tromey@redhat.com>
1842 * valprint.c (val_print): Update.
1843 * p-valprint (pascal_val_print): Return void.
1844 * p-lang.h (pascal_val_print): Return void.
1845 * m2-valprint.c (m2_val_print): Return void.
1846 * m2-lang.h (m2_val_print): Return void.
1847 * language.h (struct language_defn) <la_val_print>: Return void.
1848 * language.c (unk_lang_val_print): Return void.
1849 * jv-valprint.c (java_val_print): Return void.
1850 * jv-lang.h (java_val_print): Return void.
1851 * f-valprint.c (f_val_print): Return void.
1852 * f-lang.h (f_val_print): Return void.
1853 * d-valprint.c (d_val_print): Return void.
1854 (dynamic_array_type): Update.
1855 * d-lang.h (d_val_print): Return void.
1856 * c-valprint.c (c_val_print): Return void.
1857 * c-lang.h (c_val_print): Return void.
1858 * ada-valprint.c (ada_vada_val_print, ada_val_print_1): Return
1860 * ada-lang.h (ada_val_print): Return void.
1862 2012-03-01 Tom Tromey <tromey@redhat.com>
1864 * value.h (val_print): Return void.
1865 * valprint.c (val_print): Return void.
1867 2012-03-01 Tom Tromey <tromey@redhat.com>
1869 * value.h (common_val_print): Return void.
1870 * valprint.c (common_val_print): Return void.
1872 2012-03-01 Tom Tromey <tromey@redhat.com>
1874 * value.h (value_print): Return void.
1875 * valprint.c (value_print): Return void.
1876 * p-valprint.c (pascal_value_print): Return void.
1877 * p-lang.h (pascal_value_print): Return void.
1878 * language.h (struct language_defn) <la_value_print>: Return
1880 * language.c (unk_lang_value_print): Return void.
1881 * jv-valprint.c (java_value_print): Return void.
1882 * jv-lang.h (java_value_print): Return void.
1883 * f-valprint.c (c_value_print): Don't declare.
1885 * c-valprint.c (c_value_print): Return void.
1886 * c-lang.h (c_value_print): Return void.
1887 * ada-valprint.c (ada_value_print): Return void.
1888 * ada-lang.h (ada_value_print): Return void.
1890 2012-03-01 Tom Tromey <tromey@redhat.com>
1892 * value.c (value_primitive_field): Handle virtual base classes.
1894 2012-03-01 Tom Tromey <tromey@redhat.com>
1896 * gdbtypes.h (struct vbase): Remove.
1898 2012-03-01 Tom Tromey <tromey@redhat.com>
1900 * c-valprint.c (print_function_pointer_address): Move...
1901 * valprint.c: ... here. Make non-static.
1902 * m2-valprint.c (print_function_pointer_address): Remove.
1903 * valprint.h (print_function_pointer_address): Declare.
1905 2012-03-01 Joel Brobecker <brobecker@adacore.com>
1907 * NEWS: Document the fact that one can provide a condition when
1908 creating an Ada exception catchpoint.
1910 2012-03-01 Tom Tromey <tromey@redhat.com>
1912 * valprint.c (val_print_type_code_flags): Fix placement of
1915 2012-03-01 Joel Brobecker <brobecker@adacore.com>
1917 * copyright.py (MULTILINE_COMMENT_PREFIXES): Delete.
1918 (update_files): Do not set MULTILINE_COMMENT_PREFIXES
1919 environment variable before calling update-copyright.
1921 2012-03-01 Joel Brobecker <brobecker@adacore.com>
1923 * gnulib/extra/update-copyright: Update to the latest from
1924 gnulib's git repository.
1925 * copyright.py: Set UPDATE_COPYRIGHT_USE_INTERVALS environment
1926 variable to 2 instead of 1.
1928 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1930 * varobj.c (c_value_of_variable): Remove dead code.
1932 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1934 * ada-lex.p (processId): Do not modify already encoded IDs.
1935 Update function documentation.
1937 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1939 * ada-lang.h (ada_find_renaming_symbol): Replace parameter
1940 "name" with "struct symbol *name_sym".
1941 * ada-exp.y (write_var_or_type): Update call to
1942 ada_find_renaming_symbol.
1943 "name" with "struct symbol *name_sym". Adjust Implementation
1944 accordingly. Adjust the function documentation.
1946 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1948 * ada-lang.h (ada_find_any_symbol, ada_find_any_type): Delete.
1949 * ada-lang.c (ada_find_any_type): Add advance declaration.
1950 Make static. Replace ada_find_any_symbol by
1951 ada_find_any_type_symbol.
1952 (ada_find_any_type_symbol): Renames ada_find_any_symbol.
1953 Improve function description. Make static.
1954 (ada_find_renaming_symbol, find_old_style_renaming_symbol):
1955 Replace ada_find_any_symbol by ada_find_any_type_symbol.
1957 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1959 * ada-lang.c (struct tag_args): Delete.
1960 (ada_get_tsd_type): Function body moved up in source file.
1961 (ada_tag_name_1, ada_tag_name_2): Delete.
1962 (ada_get_tsd_from_tag): New function.
1963 (ada_tag_name_from_tsd): New function.
1964 (ada_tag_name): Use a TRY_CATCH block instead of catch_errors
1965 to determine the tag name.
1967 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1969 * ada-lang.h (ada_get_decoded_value, ada_get_decoded_type): Add
1971 * ada-lang.c (ada_get_decoded_value, ada_get_decoded_type): New
1974 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1976 * ada-lang.c (ada_is_ignored_field): Rewrite wrong comment.
1978 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1980 * ada-lang.c (ada_lookup_symbol_list): Only cache the result of
1983 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1985 * ada-lang.c (constrained_packed_array_type): If there is a
1986 parallel XA type, use it to determine the array index type.
1988 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1990 * ada-valprint.c (ada_val_print_1): If our value is a reference
1991 to an array descriptor, dereference it before converting it
1994 2012-02-29 Joel Brobecker <brobecker@adacore.com>
1996 * ada-lang.c (ada_to_fixed_value): Call unwrap_value before
1997 creating fixed value.
1998 (ada_value_ind, ada_coerce_ref, assign_component)
1999 (ada_evaluate_subexp): Remove call to unwrap_value before
2000 call to ada_to_fixed_value.
2002 2012-02-29 Joel Brobecker <brobecker@adacore.com>
2004 * ada-lang.c (to_fixed_array_type): Set result's type name.
2006 2012-02-29 Joel Brobecker <brobecker@adacore.com>
2008 * ada-lang.c (catch_ada_exception_command_split): Add new
2009 argument cond_string. Add support for condition at end of
2010 "catch exception" commands.
2011 (ada_decode_exception_location): Add new argument cond_string.
2012 Update call to catch_ada_exception_command_split.
2013 (create_ada_exception_catchpoint): Add new argument cond_string.
2014 Set the breakpoint condition if needed.
2015 (catch_ada_exception_command): Update call to
2016 ada_decode_exception_location.
2017 (ada_decode_assert_location): Add function documentation.
2018 Add support for condition at end of "catch assert" command.
2019 (catch_assert_command): Update calls to ada_decode_assert_location
2020 and create_ada_exception_catchpoint.
2022 2012-02-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2024 Fix disp-step-syscall.exp: fork: single step over fork.
2025 * i386-linux-tdep.c (-i386_linux_get_syscall_number): Rename to ...
2026 (i386_linux_get_syscall_number_from_regcache): ... here, new function
2027 comment, change parameters gdbarch and ptid to regcache. Remove
2028 parameter regcache, initialize gdbarch from regcache here.
2029 (i386_linux_get_syscall_number, i386_linux_displaced_step_copy_insn):
2031 (i386_linux_init_abi): Install i386_linux_displaced_step_copy_insn
2033 * i386-tdep.c (i386_syscall_p): Check also for 'sysenter' and
2034 'syscall'. Make the 'int' check more strict.
2036 2012-02-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2038 Fix reverse mode for syscall on AMD CPUs in 32-bit mode.
2039 * i386-linux-tdep.c (i386_linux_intx80_sysenter_record): Rename to ...
2040 (i386_linux_intx80_sysenter_syscall_record): ... here.
2041 (i386_linux_init_abi): Initialize also I386_SYSCALL_RECORD.
2042 Use the renamed function name.
2044 2012-02-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2046 * arm-linux-tdep.c (arm_linux_copy_svc): Reset stale FRAME.
2047 * breakpoint.c (until_break_command): Likewise.
2048 * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
2049 * infcall.c (call_function_by_hand): Likewise.
2050 * infcmd.c (finish_forward): Likewise.
2051 * infrun.c (insert_exception_resume_breakpoint): Likewise.
2053 2012-02-28 Tristan Gingold <gingold@adacore.com>
2055 * ada-tasks.c (ada_tasks_inferior_data_sniffer): Rework code to
2056 avoid variable assignments inside condition.
2058 2012-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2060 Fix static analysis issue found by cppcheck.
2061 * microblaze-tdep.c (microblaze_extract_return_value): Fix
2062 uninitialized BUF for size 2.
2064 2012-02-27 Chris Dearman <chris@mips.com>
2065 Nathan Froyd <froydnj@codesourcery.com>
2066 Maciej W. Rozycki <macro@codesourcery.com>
2068 * mips-tdep.c (mips32_instruction_has_delay_slot): New function.
2069 (mips16_instruction_has_delay_slot): Likewise.
2070 (mips_segment_boundary): Likewise.
2071 (mips_adjust_breakpoint_address): Likewise.
2072 (mips_gdbarch_init): Use mips_adjust_breakpoint_address.
2074 2012-02-27 Maciej W. Rozycki <macro@mips.com>
2075 Maciej W. Rozycki <macro@codesourcery.com>
2077 * infrun.c (handle_inferior_event): Don't proceed through
2078 shared library trampolines if stepping at the machine
2081 2012-02-27 Maciej W. Rozycki <macro@codesourcery.com>
2083 * mips-linux-tdep.c (mips_linux_init_abi): Set num_pseudo_regs
2086 2012-02-27 Thomas Schwinge <thomas@codesourcery.com>
2088 * sh-tdep.c (sh_make_stub_cache, sh_stub_this_id)
2089 (sh_stub_unwind_sniffer): New functions.
2090 (sh_stub_unwind): New variable.
2091 (sh_gdbarch_init): Wire everything.
2093 2012-02-27 Pedro Alves <palves@redhat.com>
2095 * linux-nat.c (pid_is_stopped): Delete, moved to common/.
2096 (linux_nat_post_attach_wait): Adjust to use
2097 linux_proc_pid_is_stopped.
2098 * common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
2099 * common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
2100 based on pid_is_stopped from both linux-nat.c and
2101 gdbserver/linux-low.c, and renamed.
2103 2012-02-24 Maciej W. Rozycki <macro@codesourcery.com>
2105 * remote.c (remote_watchpoint_addr_within_range): New function.
2106 (init_remote_ops): Use it.
2108 2012-02-24 Maciej W. Rozycki <macro@codesourcery.com>
2110 * target.h (target_watchpoint_addr_within_range): Document macro.
2112 2012-02-24 Pedro Alves <palves@redhat.com>
2114 * stack.c (set_last_displayed_sal): Issue internal_error instead
2115 of warning, and issue it after clearing the last displayed sal.
2117 2012-02-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2118 Pedro Alves <palves@redhat.com>
2120 * breakpoint.c (until_break_command): Install breakpoints after
2121 all frame manipulations.
2123 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
2125 * remote.c (remote_supports_cond_breakpoints): New forward
2127 (remote_add_target_side_condition): New function.
2128 (remote_insert_breakpoint): Add target-side breakpoint
2129 conditional if supported.
2130 (remote_insert_hw_breakpoint): Likewise.
2131 (init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
2134 * target.c (update_current_target): Inherit
2135 to_supports_evaluation_of_breakpoint_conditions.
2136 Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
2138 * target.h (struct target_ops)
2139 <to_supports_evaluation_of_breakpoint_conditions>: New field.
2140 (target_supports_evaluation_of_breakpoint_conditions): New #define.
2142 * breakpoint.c (get_first_locp_gte_addr): New forward declaration.
2143 (condition_evaluation_both, condition_evaluation_auto,
2144 condition_evaluation_host, condition_evaluation_target,
2145 condition_evaluation_enums, condition_evaluation_mode_1,
2146 condition_evaluation_mode): New static globals.
2147 (translate_condition_evaluation_mode): New function.
2148 (breakpoint_condition_evaluation_mode): New function.
2149 (gdb_evaluates_breakpoint_condition_p): New function.
2150 (ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
2151 (mark_breakpoint_modified): New function.
2152 (mark_breakpoint_location_modified): New function.
2153 (set_condition_evaluation_mode): New function.
2154 (show_condition_evaluation_mode): New function.
2155 (bp_location_compare_addrs): New function.
2156 (get_first_location_gte_addr): New helper function.
2157 (set_breakpoint_condition): Free condition bytecode if locations
2158 has become unconditional. Call mark_breakpoint_modified (...).
2159 (condition_command): Call update_global_location_list (1) for
2161 (breakpoint_xfer_memory): Use is_breakpoint (...).
2162 (is_breakpoint): New function.
2163 (parse_cond_to_aexpr): New function.
2164 (build_target_condition_list): New function.
2165 (insert_bp_location): Handle target-side conditional
2166 breakpoints and call build_target_condition_list (...).
2167 (update_inserted_breakpoint_locations): New function.
2168 (insert_breakpoint_locations): Handle target-side conditional
2170 (bpstat_check_breakpoint_conditions): Add comment.
2171 (bp_condition_evaluator): New function.
2172 (bp_location_condition_evaluator): New function.
2173 (print_breakpoint_location): Print information on where the condition
2175 (print_one_breakpoint_location): Likewise.
2176 (init_bp_location): Call mark_breakpoint_location_modified (...) for
2177 breakpoint location.
2178 (force_breakpoint_reinsertion): New functions.
2179 (update_global_location_list): Handle target-side breakpoint
2181 Reinsert locations that are already inserted if conditions have
2183 (bp_location_dtor): Free agent expression bytecode.
2184 (disable_breakpoint): Call mark_breakpoint_modified (...).
2185 Call update_global_location_list (...) with parameter 1 for breakpoints.
2186 (disable_command): Call mark_breakpoint_location_modified (...).
2187 Call update_global_location_list (...) with parameter 1 for breakpoints.
2188 (enable_breakpoint_disp): Call mark_breakpoint_modified (...).
2189 (enable_command): mark_breakpoint_location_modified (...).
2190 (_initialize_breakpoint): Update documentation and add
2191 condition-evaluation breakpoint subcommand.
2193 * breakpoint.h: Include ax.h.
2194 (condition_list): New data structure.
2195 (condition_status): New enum.
2196 (bp_target_info) <cond_list>: New field.
2197 (bp_location) <condition_changed, cond_bytecode>: New fields.
2198 (is_breakpoint): New prototype.
2200 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
2202 * remote.c (remote_state) <cond_breakpoints>: New field.
2203 (PACKET_ConditionalBreakpoints): New enum.
2204 (remote_cond_breakpoint_feature): New function.
2205 (remote_protocol_features): Add new ConditionalBreakpoints entry.
2206 (remote_supports_cond_breakpoints): New function.
2207 (_initialize_remote): Add new packet configuration for
2208 target-side conditional breakpoints.
2210 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
2212 * NEWS: Mention target-side conditional breakpoint support,
2213 new condition-evaluation breakpoint subcommand and remote
2216 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
2218 * breakpoint.c (bp_location_compare): Sort by pspace before sorting by
2221 2012-02-24 Thomas Schwinge <thomas@codesourcery.com>
2223 * sh-tdep.c (sh_skip_prologue): Use skip_prologue_using_sal.
2224 (after_prologue): Remove.
2226 2012-02-23 Tom Tromey <tromey@redhat.com>
2228 * jv-valprint.c (java_val_print): Remove dead code.
2230 2012-02-23 Tristan Gingold <gingold@adacore.com>
2232 * ada-tasks.c (struct ada_tasks_inferior_data): Add
2233 known_tasks_element and known_tasks_length fields.
2234 (read_known_tasks_array): Change argument type. Use pointer type
2235 and number of elements from DATA. Adjust.
2236 (read_known_tasks_list): Likewise.
2237 (get_known_tasks_addr): Remove.
2238 (ada_set_current_inferior_known_tasks_addr): Renamed to ...
2239 (ada_tasks_inferior_data_sniffer): ... this. Use symtab for element
2240 type and array length. Merge former get_known_tasks_addr code.
2242 2012-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2245 * infcmd.c (finish_forward): New variable frame_id, initialize it, use
2246 it after set_momentary_breakpoint.
2248 2012-02-22 Sterling Augustine <saugustine@google.com>
2251 * breakpoint.c (watchpoint_exp_is_constant): Add UNOP_CAST to switch.
2253 2012-02-22 Gary Benson <gbenson@redhat.com>
2255 * dwarf2read.c (dwarf2_read_index): Correct misspelling.
2256 (find_slot_in_mapped_hash): Likewise.
2258 2012-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2261 * configure.ac (MAKEINFO): Replace AC_CHECK_PROG by AC_ARG_VAR.
2262 (MAKEINFOFLAGS): Replace static string by AC_ARG_VAR.
2263 * configure: Regenerate.
2265 2012-02-21 Tristan Gingold <gingold@adacore.com>
2266 Pedro Alves <palves@redhat.com>
2268 * ia64-tdep.c: Do not include libunwind-ia64.h.
2269 * libunwind-frame.h: Remove #ifdef HAVE_LIBUNWIND_H guard.
2270 Include libunwind-ia64.h instead of libunwind.h.
2271 * configure.ac (--with-libunwind, $enable_libunwind): Don't check
2272 for libunwind.h existence.
2273 * configure, config.in: Regenerate.
2275 2012-02-21 Anton Gorenkov <xgsa@yandex.ru>
2277 * c-valprint.c (c_value_print): Use value_rtti_indirect_type
2278 instead of value_rtti_target_type.
2279 * eval.c (evaluate_subexp_standard): Use value_rtti_indirect_type
2280 instead of value_rtti_target_type.
2281 * typeprint.c (whatis_exp): Use value_rtti_indirect_type instead of
2282 value_rtti_target_type.
2283 * valops.c (value_ind): Extract function readjust_indirect_value_type.
2284 (value_rtti_target_type): Rename to ...
2285 (value_rtti_indirect_type): ... here and make it indirect. Update
2287 * value.c (readjust_indirect_value_type): New function.
2288 (coerce_ref): Support for enclosing type setting for references
2289 with readjust_indirect_value_type.
2290 * value.h (readjust_value_type): New declaration.
2291 (value_rtti_target_type): Rename to ...
2292 (value_rtti_indirect_type): ... here.
2294 2012-02-21 Anton Gorenkov <xgsa@yandex.ru>
2296 * MAINTAINERS (Write After Approval): Add myself to the list.
2298 2012-02-20 Doug Evans <dje@google.com>
2300 * objfiles.c (add_to_objfile_sections): Remove outdated comments.
2301 Rename objfile_p_char parameter to objfilep.
2302 (build_objfile_section_table): Result is now void. All callers
2304 * objfiles.h (struct objfile): Tweak comments, whitespace.
2305 (build_objfile_section_table): Update.
2307 * elfread.c (elf_symfile_segments): Fix warning text.
2309 2012-02-20 Tom Tromey <tromey@redhat.com>
2312 * dwarf2read.c (dw2_expand_symtabs_matching): Only visit a
2313 particular set of file names once.
2314 (dw2_map_symbol_filenames): Likewise.
2316 2012-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2319 * main.c (write_files): Remove the declaration.
2320 (external_editor_command): Move the declaration ...
2321 [GDBTK] (external_editor_command): ... here. Fix the comment.
2323 2012-02-20 Tom Tromey <tromey@redhat.com>
2325 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove
2328 2012-02-20 Tristan Gingold <gingold@adacore.com>
2330 * darwin-nat.h (enum darwin_msg_state): Add comments.
2332 2012-02-20 Tristan Gingold <gingold@adacore.com>
2334 * amd64-darwin-tdep.c (x86_darwin_init_abi_64): Fix jb_pc_offset
2337 2012-20-18 Joel Brobecker <brobecker@adacore.com>
2339 * breakpoint.c (watchpoint_exp_is_const): Add missing empty line
2340 between function description and implementation.
2342 2012-02-17 Tom Tromey <tromey@redhat.com>
2345 * python/py-event.c (event_object_getset): New global.
2346 (event_object_type): Reference it.
2347 * python/py-type.c (field_object_getset): New global.
2348 (field_object_type): Reference it.
2349 * python/python-internal.h (gdb_py_generic_dict): Declare.
2350 * python/py-utils.c (gdb_py_generic_dict): New function.
2352 2012-02-17 Tristan Gingold <gingold@adacore.com>
2354 * solib-darwin.c (darwin_current_sos): Check magic and filetype
2356 2012-02-17 Thomas Schwinge <thomas@codesourcery.com>
2358 * sh-tdep.c (sh_is_renesas_calling_convention): Fix handling of
2359 TYPE_CALLING_CONVENTION annotation.
2361 2012-02-16 Kevin Buettner <kevinb@redhat.com>
2363 * MAINTAINERS: Add rx to target ISA section.
2364 * Makefile.in (ALL_TARGET_OBS): Add rx-tdep.o.
2365 (ALLDEPFILES): Add rx-tdep.c.
2367 2012-02-16 Tom Tromey <tromey@redhat.com>
2369 * symfile.c (symbol_file_add_main_1): Use inferior's
2371 * solib.c (solib_read_symbols): Use inferior's symfile_flags.
2372 * linux-nat.c (linux_child_follow_fork): Set symfile_flags on
2374 * infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on
2376 (follow_exec): Use inferior's symfile_flags.
2377 * inferior.h (struct inferior) <symfile_flags>: New field.
2379 2012-02-16 Mike Frysinger <vapier@gentoo.org>
2382 * remote-sim.c (gdbsim_create_inferior): Call error() when
2383 sim_create_inferior() fails.
2385 2012-02-16 Josh Matthews <josh@joshmatthews.net>
2387 * machoread.c: Initialize nbr_syms to avoid warnings-as-errors failure.
2389 2012-02-16 Tom Tromey <tromey@redhat.com>
2392 * thread.c (struct current_thread_cleanup) <was_removable>: New
2394 (restore_current_thread_cleanup_dtor): Restore 'removable' field.
2395 (make_cleanup_restore_current_thread): Initialize new field.
2397 2012-02-15 Kevin Buettner <kevinb@redhat.com>
2399 * MAINTAINERS: Add rl78 to target ISA section.
2400 * Makefile.in (ALL_TARGET_OBS): Add rl78-tdep.o.
2401 (ALLDEPFILES): Add rl78-tdep.c.
2402 * NEWS: Mention rl78 as a new target.
2404 2012-02-15 Aleksandar Ristovski <aristovski@qnx.com>
2406 * frame.c (find_frame_sal): Initialize sal->pspace field from frame
2408 * stack.c (set_last_displayed_sal): Validate that PSPACE is not NULL.
2410 2012-02-15 Tom Tromey <tromey@redhat.com>
2413 * infcmd.c (registers_info): Print just the current register's
2416 2012-02-15 Tom Tromey <tromey@redhat.com>
2418 * python/py-symbol.c (sympy_value): Use _().
2420 2012-02-15 Pedro Alves <palves@redhat.com>
2422 * remote.c (remote_detach_1, extended_remote_attach_1): Tweak
2423 output to be like native targets'.
2424 (remote_pid_to_str): Special case the null ptid.
2426 2012-02-14 Stan Shebs <stan@codesourcery.com>
2428 * NEWS: Mention enable count command.
2429 * breakpoint.h (struct breakpoint): New field enable_count.
2430 * breakpoint.c (enable_breakpoint_disp): Add count argument.
2431 (enable_breakpoint): Add arg to call.
2432 (struct disp_data): New struct.
2433 (do_enable_breakpoint_disp): Interp arg as disp_data and unpack.
2434 (do_map_enable_once_breakpoint): Create a struct and pass it.
2435 (do_map_enable_delete_breakpoint): Ditto.
2436 (do_map_enable_count_breakpoint): New function.
2437 (enable_count_command): New function.
2438 (bpstat_stop_status): Decrement enable_count.
2439 (print_one_breakpoint_location): Report enable count.
2440 (_initialize_breakpoint): Add enable count command.
2442 2012-02-14 Kevin Buettner <kevinb@redhat.com>
2444 * rl78-tdep.c (reggroups.h): Include.
2445 (RL78_RAW_BANK0_R0_REGNUM, RL78_RAW_BANK0_R1_REGNUM)
2446 (RL78_RAW_BANK0_R2_REGNUM, RL78_RAW_BANK0_R3_REGNUM)
2447 (RL78_RAW_BANK0_R4_REGNUM, RL78_RAW_BANK0_R5_REGNUM)
2448 (RL78_RAW_BANK0_R6_REGNUM, RL78_RAW_BANK0_R7_REGNUM)
2449 (RL78_RAW_BANK1_R0_REGNUM, RL78_RAW_BANK1_R1_REGNUM)
2450 (RL78_RAW_BANK1_R2_REGNUM, RL78_RAW_BANK1_R3_REGNUM)
2451 (RL78_RAW_BANK1_R4_REGNUM, RL78_RAW_BANK1_R5_REGNUM)
2452 (RL78_RAW_BANK1_R6_REGNUM, RL78_RAW_BANK1_R7_REGNUM)
2453 (RL78_RAW_BANK2_R0_REGNUM, RL78_RAW_BANK2_R1_REGNUM)
2454 (RL78_RAW_BANK2_R2_REGNUM, RL78_RAW_BANK2_R3_REGNUM)
2455 (RL78_RAW_BANK2_R4_REGNUM, RL78_RAW_BANK2_R5_REGNUM)
2456 (RL78_RAW_BANK2_R6_REGNUM, RL78_RAW_BANK2_R7_REGNUM)
2457 (RL78_RAW_BANK3_R0_REGNUM, RL78_RAW_BANK3_R1_REGNUM)
2458 (RL78_RAW_BANK3_R2_REGNUM, RL78_RAW_BANK3_R3_REGNUM)
2459 (RL78_RAW_BANK3_R4_REGNUM, RL78_RAW_BANK3_R5_REGNUM)
2460 (RL78_RAW_BANK3_R6_REGNUM, RL78_RAW_BANK3_R7_REGNUM): Add to
2461 beginning of register list.
2462 (RL78_BANK0_R0_REGNUM, RL78_BANK0_R1_REGNUM, RL78_BANK0_R2_REGNUM)
2463 (RL78_BANK0_R3_REGNUM, RL78_BANK0_R4_REGNUM, RL78_BANK0_R5_REGNUM)
2464 (RL78_BANK0_R6_REGNUM, RL78_BANK0_R7_REGNUM, RL78_BANK1_R0_REGNUM)
2465 (RL78_BANK1_R1_REGNUM, RL78_BANK1_R2_REGNUM, RL78_BANK1_R3_REGNUM)
2466 (RL78_BANK1_R4_REGNUM, RL78_BANK1_R5_REGNUM, RL78_BANK1_R6_REGNUM)
2467 (RL78_BANK1_R7_REGNUM, RL78_BANK2_R0_REGNUM, RL78_BANK2_R1_REGNUM)
2468 (RL78_BANK2_R2_REGNUM, RL78_BANK2_R3_REGNUM, RL78_BANK2_R4_REGNUM)
2469 (RL78_BANK2_R5_REGNUM, RL78_BANK2_R6_REGNUM, RL78_BANK2_R7_REGNUM)
2470 (RL78_BANK3_R0_REGNUM, RL78_BANK3_R1_REGNUM, RL78_BANK3_R2_REGNUM)
2471 (RL78_BANK3_R3_REGNUM, RL78_BANK3_R4_REGNUM, RL78_BANK3_R5_REGNUM)
2472 (RL78_BANK3_R6_REGNUM, RL78_BANK3_R7_REGNUM): Move these into
2473 the pseudo registers. Rearrange other pseudo registers too so
2474 that the bank registers appear at the end.
2475 (rl78_register_type): Account for the fact that the byte sized
2476 bank registers are now pseudo-registers.
2477 (rl78_register_name): Rearrange the register name array. Make
2478 initial set of raw banked registers inaccessible.
2479 (rl78_register_reggroup_p, rl78_register_sim_regno): New functions.
2480 (rl78_pseudo_register_read, rl78_pseudo_register_write): Add
2481 case for copying bytes back and forth between raw and pseudo
2482 versions of the banked registers. Update other cases to reflect
2484 (rl78_return_value): Update to account for changed names of
2486 (rl78_gdbarch_init): Register rl78_register_reggroup_p() and
2487 rl78_register_sim_regno().
2489 2012-02-14 Kevin Buettner <kevinb@redhat.com>
2491 * rl78-tdep.c (rl78_skip_prologue): Make `const' the type of
2492 the name parameter being passed to find_pc_partial_function().
2494 2012-02-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2496 * MAINTAINERS: Step down from being ia64 target maintainer.
2498 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2500 * ppc-linux-nat.c (fetch_register, store_register): Fix GCC aliasing
2501 compilation warning.
2503 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2505 Fix crash on loaded shlibs without loaded exec_bfd.
2506 * exec.c (exec_files_info): Do not crash on NULL EXEC_BFD.
2507 (set_section_command): Replace exec_bfd by p->bfd.
2509 2012-02-10 Tom Tromey <tromey@redhat.com>
2511 * linespec.c (decode_line_internal): Skip symtabs_from_filename
2512 when we have a C++ qualified name.
2514 2012-02-10 Pedro Alves <palves@redhat.com>
2516 * inferior.c (inferior_pid_to_str): New.
2517 (print_inferior, inferior_command): Use it.
2519 2012-02-10 Pedro Alves <palves@redhat.com>
2521 * configure.ac (HAVE_ELF test): Put the old CFLAGS at the end of
2523 * configure: Regenerate.
2525 2012-02-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2527 * linespec.c (decode_line_internal): Fix comment correctness.
2529 2012-02-09 Valery Khromov <valery.khromov@gmail.com>
2532 * Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h.
2533 * amd64bsd-nat.c: Add support for debug registers (adapted from
2535 [HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set)
2536 (amd64bsd_dr_set_control, amd64bsd_dr_set_addr)
2537 (amd64bsd_dr_get_addr, amd64bsd_dr_get_status)
2538 (amd64bsd_dr_get_control): New functions.
2539 * amd64bsd-nat.h: New file (adapted from i386bsd-nat.h).
2540 * amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h".
2541 [HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware
2542 watchpoints initialization.
2543 * config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o.
2545 2012-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2547 * gdb-gdb.py (StructMainTypePrettyPrinter) <struct_field_img>: Print
2549 (StructMainTypePrettyPrinter) <bounds_img>: Print flds_bnds.bounds.
2551 2012-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2553 * breakpoint.c (bp_location_compare): Fix comment. Reindent the code.
2555 2012-02-08 Joel Brobecker <brobecker@adacore.com>
2557 * language.h (symbol_name_cmp_ftype): Renames
2558 symbol_name_match_p_ftype.
2559 (struct language_defn)[la_get_symbol_name_cmp]: Renames
2560 la_get_symbol_name_match_p.
2561 * ada-lang.c (ada_get_symbol_name_cmp): Renames
2562 ada_get_symbol_name_match_p. Update comment.
2563 (ada_language_defn)[la_get_symbol_name_cmp]: Update value.
2564 * linespec.c (struct symbol_matcher_data)[symbol_name_cmp]:
2565 Renames symbol_name_match_p. Update field type.
2566 (iterate_name_matcher, iterate_over_all_matching_symtabs): Adjust.
2567 * c-lang.c, d-lang.c, f-lang.c, jv-lang.c, m2-lang.c, objc-lang.c,
2568 opencl-lang.c, p-lang.c: Replace "la_get_symbol_name_match_p" by
2569 "la_get_symbol_name_cmp" in comments.
2570 * language.c: Likewise.
2572 2012-02-08 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
2574 * amd64-sol2-tdep.c (amd64_sol2_gregset_reg_offset): Correct
2576 * i386-sol2-nat.c (amd64_sol2_gregset64_reg_offs)
2577 (amd64_sol2_gregset32_reg_offs): Likewise.
2579 2012-02-08 Joel Brobecker <brobecker@adacore.com>
2581 * solib-darwin.c (darwin_bfd_open): Make sure that the filename
2582 of the returned BFD is allocated by GDB.
2584 2012-02-07 Tom Tromey <tromey@redhat.com>
2587 * python/python-internal.h (frame_object_type): Declare.
2588 * python/py-symbol.c (sympy_needs_frame): New function.
2589 (sympy_value): New function.
2590 (symbol_object_getset): Add "needs_frame".
2591 (symbol_object_methods): Add "value".
2592 * python/py-frame.c (frame_object_type): No longer static.
2594 2012-02-07 Tom Tromey <tromey@redhat.com>
2597 * python/py-symbol.c (sympy_line): New function.
2598 (symbol_object_getset): Add "line".
2600 2012-02-07 Tom Tromey <tromey@redhat.com>
2602 * charset.c (find_charset_names): Check 'in' against NULL.
2604 2012-02-06 Doug Evans <dje@google.com>
2606 * gdbtypes.h (struct main_type): Change type of name,tag_name,
2607 and fields.name members from char * to const char *. All uses updated.
2608 (struct cplus_struct_type): Change type of fn_fieldlists.name member
2609 from char * to const char *. All uses updated.
2610 (type_name_no_tag): Update.
2611 (lookup_unsigned_typename, lookup_signed_typename): Update.
2612 * gdbtypes.c (type_name_no_tag): Change result type
2613 from char * to const char *. All callers updated.
2614 (lookup_unsigned_typename, lookup_signed_typename): Change type of
2615 name parameter from char * to const char *.
2616 * symtab.h (struct cplus_specific): Change type of demangled_name
2617 member from char * to const char *. All uses updated.
2618 (struct general_symbol_info): Change type of name and
2619 mangled_lang.demangled_name members from char * to const char *.
2621 (symbol_get_demangled_name, symbol_natural_name): Update.
2622 (symbol_demangled_name, symbol_search_name): Update.
2623 * symtab.c (symbol_get_demangled_name): Change result type
2624 from char * to const char *. All callers updated.
2625 (symbol_natural_name, symbol_demangled_name): Ditto.
2626 (symbol_search_name): Ditto.
2627 (completion_list_add_name): Change type of symname,sym_text,
2628 text,word parameters from char * to const char *.
2629 (completion_list_objc_symbol): Change type of sym_text,
2630 text,word parameters from char * to const char *.
2631 * ada-lang.c (find_struct_field): Change type of name parameter
2632 from char * to const char *.
2633 (encoded_ordered_before): Similarly for N0,N1 parameters.
2634 (old_renaming_is_invisible): Similarly for function_name parameter.
2635 (ada_type_name): Change result type from char * to const char *.
2636 All callers updated.
2637 * ada-lang.h (ada_type_name): Update.
2638 * buildsym.c (hashname): Change type of name parameter
2639 from char * to const char *.
2640 * buildsym.h (hashname): Update.
2641 * dbxread.c (end_psymtab): Change type of include_list parameter
2642 from char ** to const char **.
2643 * dwarf2read.c (determine_prefix): Change result type
2644 from char * to const char *. All callers updated.
2645 * f-lang.c (find_common_for_function): Change type of name, funcname
2646 parameters from char * to const char *.
2647 * f-lang.c (find_common_for_function): Update.
2648 * f-valprint.c (list_all_visible_commons): Change type of funcname
2649 parameters from char * to const char *.
2650 * gdbarch.sh (static_transform_name): Change type of name parameter
2651 and result from char * to const char *.
2652 * gdbarch.c: Regenerate.
2653 * gdbarch.h: Regenerate.
2654 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type
2655 of name parameter from char * to const char *.
2656 * jv-lang.c (java_primitive_type_from_name): Ditto.
2657 (java_demangled_signature_length): Similarly for signature parameter.
2658 (java_demangled_signature_copy): Ditto.
2659 (java_demangle_type_signature): Ditto.
2660 * jv-lang.h (java_primitive_type_from_name): Update.
2661 (java_demangle_type_signature): Update.
2662 * objc-lang.c (specialcmp): Change type of a,b parameters
2663 from char * to const char *.
2664 * p-lang.c (is_pascal_string_type): Change type of arrayname parameter
2665 from char * to const char *. All callers updated.
2666 * p-lang.h (is_pascal_string_type): Update.
2667 * solib-frv.c (find_canonical_descriptor_in_load_object): Change type
2668 of name parameter from char * to const char *.
2669 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto.
2670 * utils.c (fprintf_symbol_filtered): Ditto.
2671 * defs.h (fprintf_symbol_filtered): Update.
2672 * sparc-tdep.h (sparc_sol2_static_transform_name): Update.
2673 * stabsread.h (end_psymtab): Update.
2674 * stack.c (find_frame_funname): Change type of funname parameter
2675 from char ** to const char **.
2676 * stack.h (find_frame_funname): Update.
2677 * typeprint.c (type_print): Change type of varstring parameter
2678 from char * to const char *.
2679 * value.h (type_print): Update.
2680 * xcoffread.c (xcoff_start_psymtab): Change type of filename parameter
2681 from char * to const char *. All callers updated.
2682 (xcoff_end_psymtab): Change type of include_list parameter
2683 from char ** to const char **. All callers updated.
2684 (swap_sym): Similarly for name parameter. All callers updated.
2685 * coffread.c (patch_type): Add (char*) cast to xfree parameter.
2687 (process_coff_symbol): Use xstrdup.
2688 * stabsread.c (stabs_method_name_from_physname): Renamed from
2689 update_method_name_from_physname. Change result type from void
2690 to char *. All callers updated.
2691 (read_member_functions): In has_destructor case, store name in objfile
2692 obstack instead of malloc space. In !has_stub case, fix mem leak.
2694 2012-02-06 Luca Pizzamiglio <luca.pizzamiglio@gmail.com>
2696 * configure: Rebuild.
2697 * configure.ac: Put -L../bfd and -L../libiberty at the front of
2700 2012-02-03 Kevin Buettner <kevinb@redhat.com>
2702 * configure.tgt (rl78-*-elf): New target.
2703 * rl78-tdep.c: New file.
2705 2012-02-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
2707 * remote.c (remote_rcmd): Use getpkt_sane to detect timeout
2708 and continue the loop. Add QUIT statement.
2710 2012-02-03 Tom Tromey <tromey@redhat.com>
2713 * solib.h (gdb_bfd_lookup_symbol_from_symtab): Rename from
2714 bfd_lookup_symbol_from_symtab.
2715 * solib-pa64.c (pa64_solib_create_inferior_hook): Use
2716 gdb_bfd_lookup_symbol_from_symtab.
2718 2012-02-03 Joel Brobecker <brobecker@adacore.com>
2720 * mi/mi-cmd-stack.c (list_args_or_locals): For argument symbols,
2721 use SYMBOL_LINKAGE_NAME to find the corresponding non-argument
2722 symbol. Add assertion that sym2 is never NULL.
2724 2012-02-02 Doug Evans <dje@google.com>
2726 * blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of
2727 "name" parameter to const char ** from char **. All callers updated.
2728 (find_pc_partial_function): Ditto.
2729 (cache_pc_function_name): Change type to const char * from char *.
2730 * symtab.h ((find_pc_partial_function_gnu_ifunc): Update.
2731 (find_pc_partial_function): Update.
2732 * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change
2733 type of "name" parameter to const char * from char *.
2735 * arch-utils.c (generic_in_solib_return_trampoline): Change
2736 type of "name" parameter to const char * from char *.
2737 * arch-utils.h (generic_in_solib_return_trampoline): Update.
2738 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change
2739 type of "name" parameter to const char * from char *.
2740 * gdbarch.sh (in_solib_return_trampoline): Ditto.
2741 * gdbarch.c: Regenerate.
2742 * gdbarch.h: Regenerate.
2743 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update.
2744 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update.
2745 * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change
2746 type of "name" parameter to const char * from char *.
2747 * skip.c (skip_function_pc): Ditto.
2748 * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto.
2749 * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update.
2750 * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto.
2751 * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto.
2752 * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto.
2753 * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto.
2754 * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto.
2755 * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name".
2756 * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
2758 2012-02-02 Pedro Alves <palves@redhat.com>
2760 * remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if
2761 the current inferior has no execution. Make sure the current
2762 remote process matches gdb's current inferior.
2764 2012-02-02 Tom Tromey <tromey@redhat.com>
2767 * tui/tui-win.c (parse_scrolling_args): Don't write to possibly
2770 2012-02-02 Tom Tromey <tromey@redhat.com>
2773 * symtab.c (lookup_language_this): Set block_found.
2775 2012-02-01 Tom Tromey <tromey@redhat.com>
2778 * jit.c (struct jit_inferior_data): Rewrite.
2779 (struct jit_objfile_data): New.
2780 (get_jit_objfile_data): New function.
2781 (add_objfile_entry): Update.
2782 (jit_read_descriptor): Return int. Replace descriptor_addr
2783 argument with inf_data. Update. Don't call error.
2784 (jit_breakpoint_re_set_internal): Reorder logic. Update. Look up
2786 (jit_inferior_init): Don't look up descriptor. Don't call error.
2787 (jit_reset_inferior_data_and_breakpoints)
2788 (jit_inferior_created_observer): Remove.
2789 (jit_inferior_exit_hook): Update.
2790 (jit_executable_changed_observer): Remove.
2791 (jit_event_handler): Update.
2792 (free_objfile_data): Reset inferior data if needed.
2793 (_initialize_jit): Update.
2795 2012-02-01 Tom Tromey <tromey@redhat.com>
2797 * jit.c (bfd_open_from_target_memory): Move higher in file.
2799 2012-02-01 Tristan Gingold <gingold@adacore.com>
2801 * libunwind-frame.c (libunwind_load): Display message if dlopen
2804 2012-02-01 Gary Benson <gbenson@redhat.com>
2806 * symtab.h (symbol_found_callback_ftype): New typedef.
2807 (iterate_over_symbols): Use the above.
2808 * symtab.c (iterate_over_symbols): Likewise.
2809 * language.h (language_defn->la_iterate_over_symbols): Likewise.
2810 * ada-lang.c (ada_iterate_over_symbols): Likewise.
2811 * linespec.c (iterate_over_all_matching_symtabs): Likewise.
2812 (iterate_name_matcher): Document return values.
2813 (collect_one_symbol): Likewise.
2814 (collect_function_symbols): Likewise.
2815 (collect_symbols): Likewise.
2817 2012-02-01 Tom Tromey <tromey@redhat.com>
2819 * ada-lang.c (resolve_subexp): Update.
2820 (ada_lookup_symbol_list): Add 'full_search' argument.
2821 (ada_iterate_over_symbols): Pass 0 as full_search argument to
2822 ada_lookup_symbol_list.
2823 (ada_lookup_encoded_symbol): Update.
2824 (get_var_value): Update.
2825 * ada-exp.y (block_lookup): Update.
2826 (write_var_or_type): Update.
2827 (write_name_assoc): Update.
2828 * ada-lang.h (ada_lookup_symbol_list): Update.
2830 2012-01-31 Tom Tromey <tromey@redhat.com>
2832 * language.h (struct language_defn) <la_iterate_over_symbols>: Fix
2835 2012-01-31 Doug Evans <dje@google.com>
2837 * symtab.h: Remove outdated comment.
2838 (SYMBOL_MATCHES_NATURAL_NAME): Delete.
2840 2012-02-01 Josh Matthews <josh@joshmatthews.net> (tiny change)
2842 Fix build error in Darwin port.
2843 * i386-darwin-nat.c: Include i386-nat.h.
2845 2012-01-30 Tom Tromey <tromey@redhat.com>
2847 PR breakpoints/13568:
2848 * dwarf2read.c (dwarf_decode_macro_bytes): Add 'include_hash'
2849 argument. Check for recursive includes.
2850 (dwarf_decode_macros): Create an include hash.
2852 2012-01-30 Michael Eager <eager@eagercon.com>
2854 * configure.tgt (powerpc-*-linux*): Add glibc-tdep.o.
2855 * ppc-linux-tdep.c: Include glibc-tdep.h.
2856 (powerpc32_plt_stub, powerpc32_plt_stub_so): Add PLT stub templates.
2857 (powerpc_linux_in_plt_stub): New function.
2858 (powerpc_linux_in_dynsym_resolve_code): New function.
2859 (ppc_skip_trampoline_code): New function.
2860 (ppc_linux_init_abi): Use PPC specific functions rather than generic.
2861 Use glibc_skip_solib_resolver.
2863 2012-01-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2865 Code cleanup: Make 1440 bytes of data segment read-only.
2866 * arch-utils.c (endian_enum): Make it const char *const [].
2867 * arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings):
2869 * breakpoint.c (always_inserted_enums): Likewise.
2870 * cli/cli-cmds.c (script_ext_enums): Likewise.
2871 * cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the
2872 enumlist parameter const char *const *.
2873 * cli/cli-decode.h (struct cmd_list_element): Make the enums field
2874 const char *const *.
2875 * command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist
2876 parameter const char *const *.
2877 * cris-tdep.c (cris_modes): Make it const char *const [].
2878 * filesystem.c (target_file_system_kinds): Likewise.
2879 * i386-tdep.c (valid_flavors, valid_conventions): Likewise.
2880 * infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names)
2881 (can_use_displaced_stepping_enum, scheduler_enums)
2882 (exec_direction_names): Likewise.
2883 * language.c (_initialize_language): Make the type_or_range_names and
2884 case_sensitive_names variables const char *const [].
2885 * mips-tdep.c (mips_abi_strings): Make it const char *const [].
2886 * python/python.c (python_excp_enums): Likewise.
2887 * remote.c (interrupt_sequence_modes): Likewise.
2888 * rs6000-tdep.c (powerpc_vector_strings): Likewise.
2889 * serial.c (logbase_enums): Likewise.
2890 * sh-tdep.c (sh_cc_enum): Likewise.
2891 * stack.c (print_frame_arguments_choices, print_entry_values_choices):
2893 * symtab.c (multiple_symbols_modes): Likewise.
2894 * tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums):
2896 * utils.c (internal_problem_modes): Likewise.
2898 2012-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2900 Fix the 2012-01-26 regression by la_get_symbol_name_match_p.
2901 * linespec.c (iterate_name_matcher): Negate the SYMBOL_NAME_MATCH_P
2904 2012-01-27 Doug Evans <dje@google.com>
2906 * configure.ac (with_python): Fix absolute path handling for win32.
2907 * configure: Regenerate.
2909 2012-01-26 Doug Evans <dje@google.com>
2911 * symtab.c: Whitespace cleanup, no code changes.
2913 * symtab.c (lookup_symbol_in_language): Improve comment.
2914 (lookup_symbol_aux): Fix comment.
2916 * psymtab.c (add_psymbol_to_list): Result is now "void".
2917 * psympriv.h (add_psymbol_to_list): Update.
2919 * dwarf2read.c (add_partial_symbol): Delete local psym, unused.
2921 2012-01-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2923 Do not open script filenames twice.
2924 * cli/cli-cmds.c (source_script_from_stream): Pass to
2925 source_python_script also STREAM.
2926 * python/py-auto-load.c (source_section_scripts): Pass to
2927 source_python_script_for_objfile also STREAM.
2928 (auto_load_objfile_script): Pass to source_python_script_for_objfile
2930 * python/python-internal.h (source_python_script_for_objfile): New
2931 parameter file, rename parameter file to filename.
2932 * python/python.c (python_run_simple_file): Call PyRun_SimpleFile
2933 instead if !_WIN32. Update the function comment.
2934 (source_python_script, source_python_script_for_objfile)
2935 (source_python_script): New parameter file, rename parameter file to
2936 filename. Pass FILENAME to python_run_simple_file.
2937 * python/python.h (source_python_script): New parameter file, rename
2938 parameter file to filename.
2940 2012-01-26 Pedro Alves <palves@redhat.com>
2942 * corelow.c (core_has_fake_pid): Delete.
2943 (core_close): Delete references to `core_has_fake_pid'.
2944 (add_to_thread_list): Adjust to mark the inferior's pid as fake.
2945 (core_open): Delete references to `core_has_fake_pid'.
2946 (core_pid_to_str): Adjust to check inferior->fake_pid_p instead of
2949 2012-01-26 Joel Brobecker <brobecker@adacore.com>
2951 * symfile.h (struct quick_symbol_functions) [expand_symtabs_matching]:
2952 Remove language parameter from name_matcher. Adjust the comment.
2953 * symtab.c (search_symbols_name_matches, expand_partial_symbol_name):
2954 Remove language parameter.
2955 * ada-lang.c (ada_expand_partial_symbol_name): Likewise.
2956 * linespec.c (iterate_name_matcher): Likewise.
2957 * dwarf2read.c (dw2_expand_symtabs_matching): Adjust type of
2958 name_matcher. Adjust call accordingly.
2959 * psymtab.c (expand_symtabs_matching_via_partial): Likewise.
2960 (maintenance_check_symtabs): Adjust type of parameter "fun".
2961 * psymtab.h (maintenance_check_symtabs): Likewise.
2963 2012-01-26 Joel Brobecker <brobecker@adacore.com>
2965 * language.h (symbol_name_match_p_ftype): New typedef.
2966 (struct language_defn): Replace field la_symbol_name_compare
2967 by la_get_symbol_name_match_p.
2968 * ada-lang.c (ada_get_symbol_name_match_p): New function.
2969 (ada_language_defn): Use it.
2970 * linespec.c (struct symbol_matcher_data): New type.
2971 (iterate_name_matcher): Rewrite.
2972 (iterate_over_all_matching_symtabs): Pass a pointer to
2973 a symbol_matcher_data struct to expand_symtabs_matching
2974 instead of just the lookup name.
2975 * c-lang.c, d-lang.c, jv-lang.c, m2-lang.c, objc-lang.c,
2976 opencl-lang.c, p-lang.c, language.c: Delete field
2977 la_symbol_name_compare, and replace by NULL for new field
2978 la_get_symbol_name_match_p.
2979 * symfile.h (struct quick_symbol_functions): Update comment.
2981 2012-01-25 Tom Tromey <tromey@redhat.com>
2983 * breakpoint.c (bpstat_stop_status): Check 'breakpoint_at' before
2986 2012-01-24 Tom Tromey <tromey@redhat.com>
2989 * solib.c (update_solib_list): Update the program space's
2990 added_solibs and deleted_solibs fields.
2991 * progspace.h (struct program_space) <added_solibs,
2992 deleted_solibs>: New fields.
2993 (clear_program_space_solib_cache): Declare.
2994 * progspace.c (release_program_space): Call
2995 clear_program_space_solib_cache.
2996 (clear_program_space_solib_cache): New function.
2997 * infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>: Call
2998 bpstat_stop_status. Use handle_solib_event.
2999 * breakpoint.c: Include gdb_regex.h.
3000 (print_solib_event): New function.
3001 (bpstat_print): Use print_solib_event.
3002 (bpstat_stop_status): Add special case for bp_shlib_event.
3003 (handle_solib_event): New function.
3004 (bpstat_what): Use handle_solib_event.
3005 (struct solib_catchpoint): New.
3006 (dtor_catch_solib, insert_catch_solib, remove_catch_solib)
3007 (breakpoint_hit_catch_solib, check_status_catch_solib)
3008 (print_it_catch_solib, print_one_catch_solib)
3009 (print_mention_catch_solib, print_recreate_catch_solib): New
3011 (catch_solib_breakpoint_ops): New global.
3012 (catch_load_or_unload, catch_load_command_1)
3013 (catch_unload_command_1): New functions.
3014 (internal_bkpt_check_status): Add special case for
3016 (internal_bkpt_print_it): Use print_solib_event.
3017 (initialize_breakpoint_ops): Initialize
3018 catch_solib_breakpoint_ops.
3019 (_initialize_breakpoint): Register "catch load" and "catch
3021 * breakpoint.h (handle_solib_event): Declare.
3022 * NEWS: Add entry for "catch load" and "catch unload".
3024 2012-01-24 Tom Tromey <tromey@redhat.com>
3026 * ada-lang.c: Include gdb_vecs.h.
3027 * charset.c: Include gdb_vecs.h.
3028 * tracepoint.h: Include gdb_vecs.h.
3029 * gdb_vecs.h: New file.
3031 2012-01-24 Pedro Alves <pedro@codesourcery.com>
3033 * breakpoint.c (breakpoint_hit_catch_fork)
3034 (breakpoint_hit_catch_vfork, breakpoint_hit_catch_syscall)
3035 (breakpoint_hit_catch_exec): Make use of the `ws' argument.
3036 * infrun.c (inferior_has_forked, inferior_has_vforked)
3037 (inferior_has_execd, inferior_has_called_syscall): Delete.
3038 (handle_syscall_event): Get syscall_number from the execution
3039 control state's wait status.
3040 (wait_for_inferior): Don't clear syscall_number.
3042 2012-01-24 Pedro Alves <palves@redhat.com>
3044 * breakpoint.c (bpstat_check_location, bpstat_stop_status,
3045 pc_at_non_inline_function): Add `ws' parameter, and pass it down.
3046 (breakpoint_hit_catch_fork, breakpoint_hit_catch_vfork)
3047 (breakpoint_hit_catch_syscall, breakpoint_hit_catch_exec): Add
3049 (breakpoint_hit_ranged_breakpoint): Add `ws' parameter. Return
3050 false for events other than TARGET_SIGNAL_TRAP.
3051 (breakpoint_hit_watchpoint, base_breakpoint_breakpoint_hit):
3053 (bkpt_breakpoint_hit): Add `ws' parameter. Return false for
3054 events other than TARGET_SIGNAL_TRAP.
3055 (tracepoint_breakpoint_hit): Add `ws' parameter.
3056 * breakpoint.h (struct breakpoint_ops) <breakpoint_hit>: Add `ws'
3058 (bpstat_stop_status): Same.
3059 (pc_at_non_inline_function): Same.
3060 * infrun.c (handle_syscall_event, handle_inferior_event): Adjust
3061 to pass the current event's waitstatus to bpstat_stop_status
3062 and pc_at_non_inline_function.
3064 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3067 * cli/cli-cmds.c (source_script_from_stream): Never fclose STREAM.
3068 Update the function comment for it.
3069 (source_script_with_search): Call make_cleanup_fclose for STREAM.
3070 * cli/cli-script.c (script_from_file): Do not call make_cleanup_fclose
3073 2012-01-24 Pedro Alves <palves@redhat.com>
3075 * breakpoint.c (bpstat_stop_status): Moving clearing print_it
3076 outside `bs->stop' block.
3077 (bpstat_what): Rework bp_shlib_event handling.
3078 (internal_bkpt_check_status): If the breakpoint is a
3079 bp_shlib_event, then set bs->stop and bs->print if
3080 stop_on_solib_events is set.
3082 2012-01-24 Gary Benson <gbenson@redhat.com>
3084 Delete #if 0'd out code.
3085 * stack.c (print_frame_label_vars): Remove.
3086 (catch_info): Likewise.
3087 (_initialize_stack): Remove "info catch" command.
3088 * NEWS: Mention the above.
3090 2012-01-24 Pedro Alves <palves@redhat.com>
3092 * remote.c (remote_add_inferior): New `fake_pid_p' parameter. Use
3094 (remote_notice_new_inferior): If the remote end doesn't support
3095 the multiprocess extensions, then the PID is fake.
3096 (add_current_inferior_and_thread): New.
3097 (remote_start_remote): Use it.
3098 (extended_remote_attach_1): Adjust.
3099 (extended_remote_create_inferior_1): Use
3100 add_current_inferior_and_thread.
3102 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3104 Fix watchpoints to be specific for each inferior.
3105 * breakpoint.c (watchpoint_in_thread_scope): Verify also
3106 current_program_space.
3107 * i386-nat.c (i386_inferior_data_cleanup): New.
3108 (i386_inferior_data_get): Replace variable inf_data_local by an
3110 (i386_use_watchpoints): Initialize i386_inferior_data.
3111 * linux-nat.c (linux_nat_iterate_watchpoint_lwps): Use INFERIOR_PTID
3112 specific iterate_over_lwps.
3114 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3116 Fix watchpoints across inferior fork.
3117 * amd64-linux-nat.c (update_debug_registers_callback): Update the
3118 comment for linux_nat_iterate_watchpoint_lwps.
3119 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
3120 linux_nat_iterate_watchpoint_lwps.
3121 (amd64_linux_prepare_to_resume): New comment on Linux kernel.
3122 * i386-linux-nat.c (update_debug_registers_callback): Update the
3123 comment for linux_nat_iterate_watchpoint_lwps.
3124 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
3125 linux_nat_iterate_watchpoint_lwps.
3126 (i386_linux_prepare_to_resume): New comment on Linux kernel.
3127 * i386-nat.c: Include inferior.h.
3128 (dr_mirror): Remove.
3129 (i386_inferior_data, struct i386_inferior_data)
3130 (i386_inferior_data_get): New.
3131 (i386_debug_reg_state): Use i386_inferior_data_get.
3132 (i386_cleanup_dregs, i386_update_inferior_debug_regs)
3133 (i386_insert_watchpoint, i386_remove_watchpoint)
3134 (i386_stopped_data_address, i386_insert_hw_breakpoint)
3135 (i386_remove_hw_breakpoint): New variable state, use
3136 i386_debug_reg_state instead of DR_MIRROR.
3137 * linux-nat.c (delete_lwp): New declaration.
3138 (num_lwps): Move here from downwards.
3139 (delete_lwp_cleanup): New.
3140 (linux_child_follow_fork): Create new child_lp, call
3141 linux_nat_new_thread and linux_nat_prepare_to_resume before calling
3143 (num_lwps): Move upwards.
3144 (linux_nat_iterate_watchpoint_lwps): New.
3145 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New.
3146 (linux_nat_iterate_watchpoint_lwps_ftype): New declaration.
3148 2012-01-24 Joel Brobecker <brobecker@adacore.com>
3152 2012-01-23 Pedro Alves <palves@redhat.com>
3154 * top.c (caution): Rename to ...
3155 (confirm): ... this.
3156 (show_caution): Rename to ...
3157 (show_confirm): ... this.
3158 (quit_cover): Adjust.
3159 (init_main): Adjust.
3160 * top.h (caution): Rename to ...
3161 (confirm): ... this.
3162 * utils.c (internal_vproblem, defaulted_query): Adjust.
3164 2012-01-23 Pedro Alves <palves@redhat.com>
3166 * top.c (caution): Update comment.
3167 (execute_command): Don't consider the current value of `caution'.
3169 2012-01-23 Jan Kratochvil <jan.kratochvil@redhat.com>
3171 * cli/cli-cmds.c (find_and_open_script): Handle failure of fdopen.
3173 2012-01-23 Ulrich Weigand <ulrich.weigand@linaro.org>
3175 * inf-child.c: Include "gdb_stat.h" instead of <sys/stat.h>.
3176 * linux-tdep.c (linux_info_proc): Avoid ARI coding style warning.
3177 * target.c (target_fileio_pwrite): Remove buffer address from
3179 (target_fileio_pread): Likewise.
3181 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
3183 * NEWS: Document remote "info proc" and "generate-core-file".
3185 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
3187 * gdbarch.sh (find_memory_regions): New callback.
3188 * gdbarch.c, gdbarch.h: Regenerate.
3190 * gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions
3191 callback before falling back to target method.
3193 * linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove.
3194 (linux_target_install_ops): No longer install it.
3196 * linux-tdep.c (linux_find_memory_regions): New function.
3197 (linux_init_abi): Install it.
3199 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
3201 * gdbarch.sh (make_corefile_notes): New architecture callback.
3202 * gdbarch.c: Regenerate.
3203 * gdbarch.h: Likewise.
3205 * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes
3206 before target_make_corefile_notes. If NULL is returned, the
3207 target does not support core file generation.
3209 * linux-nat.c: Include "linux-tdep.h".
3210 (find_signalled_thread, find_stop_signal): Remove.
3211 (linux_nat_do_thread_registers): Likewise.
3212 (struct linux_nat_corefile_thread_data): Likewise.
3213 (linux_nat_corefile_thread_callback): Likewise.
3214 (iterate_over_spus): Likewise.
3215 (struct linux_spu_corefile_data): Likewise.
3216 (linux_spu_corefile_callback): Likewise.
3217 (linux_spu_make_corefile_notes): Likewise.
3218 (linux_nat_collect_thread_registers): New function.
3219 (linux_nat_make_corefile_notes): Replace contents by call to
3220 linux_make_corefile_notes passing linux_nat_collect_thread_registers
3221 as native-only callback.
3223 * linux-tdep.h: Include "bfd.h".
3224 (struct regcache): Add forward declaration.
3225 (linux_collect_thread_registers_ftype): New typedef.
3226 (linux_make_corefile_notes): Add prototype.
3227 * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h",
3228 "regset.h", and "elf-bfd.h".
3229 (find_signalled_thread, find_stop_signal): New functions.
3230 (linux_spu_make_corefile_notes): Likewise.
3231 (linux_collect_thread_registers): Likewise.
3232 (struct linux_corefile_thread_data): New data structure.
3233 (linux_corefile_thread_callback): New funcion.
3234 (linux_make_corefile_notes): Likewise.
3235 (linux_make_corefile_notes_1): Likewise.
3236 (linux_init_abi): Install it.
3238 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
3240 * gdbarch.sh (info_proc): New callback.
3241 * gdbarch.c, gdbarch.h: Regenerate.
3243 * infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback
3244 before falling back to the target info_proc callback.
3246 * linux-nat.c: Do not include "cli/cli-utils.h".
3247 (linux_nat_info_proc): Remove.
3248 (linux_target_install_ops): No longer install it.
3250 * linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>.
3251 (read_mapping): New function.
3252 (linux_info_proc): Likewise.
3253 (linux_init_abi): Install it.
3255 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
3257 * defs.h (enum info_proc_what): Moved here from linux-nat.c
3258 * infcmd.c: (info_proc_cmd_1): New function.
3259 (info_proc_cmd): New function, moved here from equivalent routine
3260 orignally in linux-nat.c.
3261 (info_proc_cmd_mappings): Likewise.
3262 (info_proc_cmd_stat): Likewise.
3263 (info_proc_cmd_status): Likewise.
3264 (info_proc_cmd_cwd): Likewise.
3265 (info_proc_cmd_cmdline): Likewise.
3266 (info_proc_cmd_exe): Likewise.
3267 (info_proc_cmd_all): Likewise.
3268 (_initialize_infcmd): Install "info proc" command and subcommands.
3270 * target.h (struct target_ops): Add to_info_proc.
3271 (target_info_proc): Add prototype.
3272 * target.c (target_info_proc): New function.
3274 * procfs.c (procfs_info_proc): Add prototype.
3275 (info_proc_cmd): Rename into ...
3276 (procfs_info_proc): ... this. Update argument types as appropriate
3277 for a to_info_proc implementation. Handle "what" argument.
3278 (procfs_target): Install procfs_info_proc.
3279 (_initialize_procfs): No longer install "info proc" command.
3281 * linux-nat.c: (enum info_proc_what): Remove.
3282 (linux_nat_info_proc_cmd_1): Rename into ...
3283 (linux_nat_info_proc): ... this. Update argument types as appropriate
3284 for a to_info_proc implementation.
3285 (linux_nat_info_proc_cmd): Remove.
3286 (linux_nat_info_proc_cmd_mappings): Likewise.
3287 (linux_nat_info_proc_cmd_stat): Likewise.
3288 (linux_nat_info_proc_cmd_status): Likewise.
3289 (linux_nat_info_proc_cmd_cwd): Likewise.
3290 (linux_nat_info_proc_cmd_cmdline): Likewise.
3291 (linux_nat_info_proc_cmd_exe): Likewise.
3292 (linux_nat_info_proc_cmd_all): Likewise.
3293 (linux_target_install_ops): Install linux_nat_info_proc.
3294 (_initialize_linux_nat): No longer install "info proc" command
3297 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
3299 * configure.ac [AC_CHECK_FUNCS]: Check for readlink.
3300 * config.in, configure: Regenerate.
3302 * target.h (struct target_ops): Add to_fileio_readlink.
3303 (target_fileio_readlink): Add prototype.
3304 * target.c (target_fileio_readlink): New function.
3306 * inf-child.c: Conditionally include <sys/param.h>.
3307 (inf_child_fileio_readlink): New function.
3308 (inf_child_target): Install it.
3310 * remote.c (PACKET_vFile_readlink): New enum value.
3311 (remote_hostio_readlink): New function.
3312 (init_remote_ops): Install it.
3313 (_initialize_remote): Handle vFile:readlink packet type.
3315 2012-01-20 Pedro Alves <palves@redhat.com>
3316 Ulrich Weigand <ulrich.weigand@linaro.org>
3318 * configure.ac [AC_CHECK_FUNCS]: Check for pread and pwrite.
3319 * config.in, configure: Regenerate.
3321 * target.h (struct target_ops): Add to_fileio_open, to_fileio_pwrite,
3322 to_fileio_pread, to_fileio_close, to_fileio_unlink.
3323 (target_fileio_open): Add prototype.
3324 (target_fileio_pwrite): Likewise.
3325 (target_fileio_pread): Likewise.
3326 (target_fileio_close): Likewise.
3327 (target_fileio_unlink): Likewise.
3328 (target_fileio_read_alloc): Likewise.
3329 (target_fileio_read_stralloc): Likewise.
3331 * target.c: Include "gdb/fileio.h".
3332 (target_read_stralloc): Accept trailing, but not embedded NUL bytes.
3333 (default_fileio_target): New function.
3334 (target_fileio_open): Likewise.
3335 (target_fileio_pwrite): Likewise.
3336 (target_fileio_pread): Likewise.
3337 (target_fileio_close): Likewise.
3338 (target_fileio_unlink): Likewise.
3339 (target_fileio_close_cleanup): Likewise.
3340 (target_fileio_read_alloc_1): Likewise.
3341 (target_fileio_read_alloc): Likewise.
3342 (target_fileio_read_stralloc): Likewise.
3344 * inf-child.c: Include "gdb/fileio.h", <sys/types.h>, <sys/stat.h>,
3345 <fcntl.h>, and <unistd.h>.
3346 (inf_child_fileio_open_flags_to_host): New function.
3347 (inf_child_errno_to_fileio_error): Likewise.
3348 (inf_child_fileio_open): Likewise.
3349 (inf_child_fileio_pwrite): Likewise.
3350 (inf_child_fileio_pread): Likewise.
3351 (inf_child_fileio_close): Likewise.
3352 (inf_child_fileio_unlink): Likewise.
3353 (inf_child_target): Install to_fileio routines.
3355 * remote.c (init_remote_ops): Install to_fileio routines.
3357 2012-01-20 Pedro Alves <palves@redhat.com>
3358 Ulrich Weigand <ulrich.weigand@linaro.org>
3360 * remote.c (remote_multi_process_p): Only check for multi-process
3361 protocol feature, do not check for extended protocol.
3362 (remote_supports_multi_process): Check for extended protocol here.
3363 (set_general_process): Likewise.
3364 (extended_remote_kill): Likewise.
3365 (remote_pid_to_str): Likewise.
3366 (remote_query_supported): Always query multiprocess mode.
3368 2012-01-20 Pedro Alves <palves@redhat.com>
3369 Ulrich Weigand <ulrich.weigand@linaro.org>
3371 * inferior.h (struct inferior): Add fake_pid_p.
3372 * inferior.c (exit_inferior_1): Clear fake_pid_p.
3373 * remote.c (remote_start_remote): Set fake_pid_p if we have to use
3374 magic_null_ptid since the remote side doesn't provide a real PID.
3376 2012-01-19 Tom Tromey <tromey@redhat.com>
3378 * NEWS: Combine the two Python sections.
3380 2012-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
3382 * target.h (target_close): Update comment on the target's unpush state.
3384 2012-01-19 Pedro Alves <palves@redhat.com>
3386 * linux-nat.c (linux_nat_close): Call linux_nat_is_async_p and
3387 linux_nat_async directly instead of going through the target
3389 * target.c (unpush_target): Close target after unpushing it, not
3392 2012-01-19 Gary Benson <gbenson@redhat.com>
3394 * mdebugread.c (sort_blocks): Replace integer constants with ones
3395 derived from FIRST_LOCAL_BLOCK.
3397 2012-01-18 Paul Pluzhnikov <ppluzhnikov@google.com>
3398 Jan Kratochvil <jan.kratochvil@redhat.com>
3401 * symfile.c (find_separate_debug_file): New function.
3402 (terminate_after_last_dir_separator): Likewise.
3403 (find_separate_debug_file_by_debuglink): Also try realpath.
3404 * configure.ac (AC_CHECK_FUNCS): Add lstat.
3405 * configure: Regenerate.
3406 * config.in: Regenerate.
3408 2012-01-18 Doug Evans <dje@google.com>
3410 * Makefile.in (TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_DEFINE): Delete.
3411 (main.o): Remove rule.
3412 * configure.ac (BINDIR): Define with AC_DEFINE_DIR.
3413 (--with-sysroot): Rewrite.
3414 * configure: Regenerate.
3415 * config.in: Regenerate.
3417 2012-01-18 Sergio Durigan Junior <sergiodj@redhat.com>
3419 * parse.c (initialize_expout): New function.
3420 (reallocate_expout): Likewise.
3421 (parse_exp_in_context): Use `initialize_expout' and
3422 `reallocate_expout' when appropriate.
3424 2012-01-18 Pedro Alves <palves@redhat.com>
3426 * record.c (struct record_breakpoint, record_breakpoint_p)
3427 (record_breakpoints): New.
3428 (record_insert_breakpoint, record_remove_breakpoint): Manage
3429 record breakpoints list. Only remove breakpoints from the
3430 inferior if they had been inserted there in the first place.
3432 2012-01-17 Doug Evans <dje@google.com>
3434 * linespec.c (decode_line_internal): Don't call symtabs_from_filename
3435 if we know we don't have a file name to look for.
3437 2012-01-17 Pedro Alves <palves@redhat.com>
3439 * dwarf2-frame.c (dwarf2_frame_cfa): Throw NOT_AVAILABLE_ERROR, if
3440 the frame's stop reason is UNWIND_UNAVAILABLE.
3442 2012-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
3444 Fix compilation error.
3445 * m2-exp.y (yyerror): Use ANSI C prototype.
3447 2012-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
3449 * f-exp.y (parse_number): Convert prototype from K&R to ANSI C.
3450 (growbuf_by_size): Likewise.
3451 (yyerror): Likewise.
3452 * m2-exp.y (make_qualname): Remove function (was #if 0'ed).
3453 (modblock): Remove variable (was #if 0'ed).
3454 (parse_number): Convert prototype from K&R to ANSI C.
3455 (yyerror): Likewise.
3456 * objc-exp.y (parse_number): Likewise.
3457 (yyerror): Likewise.
3458 (yylex): Remove #if 0'ed code.
3459 * p-exp.y (uptok): Convert prototype from K&R to ANSI C.
3460 (yyerror): Likewise.
3462 2012-01-16 Tom Tromey <tromey@redhat.com>
3465 * symtab.h (compare_filenames_for_search): Declare.
3466 * symtab.c (compare_filenames_for_search): New function.
3467 (iterate_over_some_symtabs): Use it.
3468 * symfile.h (struct quick_symbol_functions)
3469 <map_symtabs_matching_filename>: Change spec.
3470 * psymtab.c (partial_map_symtabs_matching_filename): Use
3471 compare_filenames_for_search. Update for new spec.
3472 * dwarf2read.c (dw2_map_symtabs_matching_filename): Use
3473 compare_filenames_for_search. Update for new spec.
3474 * breakpoint.c (clear_command): Use compare_filenames_for_search.
3476 2012-01-16 Tom Tromey <tromey@redhat.com>
3479 * gdbtypes.h (TYPE_FLAG_ENUM): New macro.
3480 (struct main_type) <flag_flag_enum>: New field.
3481 * dwarf2read.c (process_enumeration_scope): Detect "flag" enums.
3482 * NEWS: Add entries.
3483 * c-valprint.c (c_val_print) <TYPE_CODE_ENUM>: Handle "flag"
3485 * python/lib/gdb/printing.py (_EnumInstance): New class.
3486 (FlagEnumerationPrinter): Likewise.
3488 2012-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
3490 * breakpoint.c (create_sals_from_address_default): New function.
3491 (create_breakpoints_sal_default): Likewise.
3492 (decode_linespec_default): Likewise.
3493 (is_marker_spec): Removed.
3494 (strace_marker_p): New function.
3495 (init_breakpoint_sal): Using `strace_marker_p' instead of
3497 (create_breakpoint): Call method `create_sals_from_address' from
3498 breakpoint_ops, replacing code that created SALs conditionally
3499 on the type of the breakpoint. Call method `create_breakpoints_sal',
3500 replacing code that created breakpoints conditionally on the type
3502 (base_breakpoint_create_sals_from_address): New function.
3503 (base_breakpoint_create_breakpoints_sal): Likewise.
3504 (base_breakpoint_decode_linespec): Likewise.
3505 (base_breakpoint_ops): Add methods
3506 `base_breakpoint_create_sals_from_address',
3507 `base_breakpoint_create_breakpoints_sal' and
3508 `base_breakpoint_decode_linespec'.
3509 (bkpt_create_sals_from_address): New function.
3510 (bkpt_create_breakpoints_sal): Likewise.
3511 (bkpt_decode_linespec): Likewise.
3512 (tracepoint_create_sals_from_address): Likewise.
3513 (tracepoint_create_breakpoints_sal): Likewise.
3514 (tracepoint_decode_linespec): Likewise.
3515 (strace_marker_create_sals_from_address): Likewise.
3516 (strace_marker_create_breakpoints_sal): Likewise.
3517 (strace_marker_decode_linespec): Likewise.
3518 (strace_marker_breakpoint_ops): New variable.
3519 (addr_string_to_sals): Remove `marker_spec'. Call method
3520 `decode_linespec' from breakpoint_ops, replacing code that decoded
3521 an address string into a SAL. Use `strace_marker_p' instead of
3523 (strace_command): Decide whether we are dealing with a static
3524 tracepoint with marker or not. Use the appropriate breakpoint_ops.
3525 (initialize_breakpoint_ops): Initialize new fields of breakpoint_ops.
3526 * breakpoint.h (linespec_result, linespec_sals): New forward
3528 (breakpoint_ops) <create_sals_from_address>,
3529 <create_breakpoints_sal>, <decode_linespec>: New methods.
3531 2012-01-14 Doug Evans <dje@google.com>
3533 * NEWS: Update text for "maint set python print-stack".
3534 It is deprecated in gdb 7.4 and deleted in 7.5.
3536 2012-01-13 Eli Zaretskii <eliz@gnu.org>
3538 * gdb_curses.h (MOUSE_MOVED) [__MINGW32__]: Undefine before
3541 2012-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
3543 * configure: Regenerate.
3544 * config.in: Regenerate.
3546 2012-01-12 Keith Seitz <keiths@redhat.com>
3549 * varobj.c (ANONYMOUS_STRUCT_NAME): Define.
3550 (ANONYMOUS_UNION_NAME): Define.
3551 (is_path_expr_parent): New function.
3552 (get_path_expr_parent): New function.
3553 (is_anonymous_child): New function.
3554 (create_child_with_value): If the child is anonymous and without
3555 a name, assign an object name to it.
3556 (c_describe_child): Use get_path_expr_parent to determine
3557 the parent expression.
3558 If there field represents an anonymous struct or union and
3559 has no name, set an appropriate display name and expression.
3560 (cplus_describe_child): Likewise.
3562 2012-01-12 Pedro Alves <palves@redhat.com>
3564 * i386-tdep.c (i386_frame_cache_1): Also mark the frame base as
3565 available when %ebp is found to be zero (outermost).
3567 2012-01-11 Andreas Tobler <andreast@fgznet.ch>
3569 * common/gdb_assert.h (gdb_static_assert): Rename static_assert to
3570 an internal gdb_static_assert.
3571 * mi/mi-common.c: Rename static_assert to gdb_static_assert.
3573 2012-01-11 Tom Tromey <tromey@redhat.com>
3576 * breakpoint.c (_initialize_breakpoint): Fix help for "catch
3577 catch" and "catch throw".
3579 2012-01-11 Paul Hilfinger <hilfingr@adacore.com>
3581 * blockframe.c (block_innermost_frame): Start search from selected
3582 frame, if present, or otherwise the current frame.
3584 * c-exp.y (variable): Update innermost_block for
3585 'block COLONCOLON NAME' clause.
3586 * m2-exp.y (variable): Ditto.
3587 * objc-exp.y (variable): Ditto.
3589 2012-01-10 Tom Tromey <tromey@redhat.com>
3592 * python/python.c (finish_python_initialization): Set sys.argv.
3594 2012-01-10 Doug Evans <dje@google.com>
3596 * dwarf2read.c (dwarf_decode_lines): Remove arg "abfd". New arg
3597 "want_line_info". All callers updated.
3598 (dwarf_decode_lines_1): New function.
3599 (handle_DW_AT_stmt_list): Add function comment.
3600 New arg "want_line_info". All callers updated.
3601 (read_file_scope,read_type_unit_scope): Move comment from
3602 handle_DW_AT_stmt_list to here.
3604 2012-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3606 Fix regression after libiberty/ update for GCC PR 6057 and others.
3607 * c-exp.y (operator) <OPERATOR DELETE>
3608 (operator) <OPERATOR DELETE '[' ']'>: Add trailing space.
3609 * cp-name-parser.y (fill_comp, make_operator, make_dtor)
3610 (make_builtin_type, make_name): New variable i, add gdb_assert.
3611 (operator) <OPERATOR NEW>: Update ARGS to 3.
3612 (operator) <OPERATOR DELETE>: Add trailing space.
3613 (operator) <OPERATOR NEW '[' ']'>: Update ARGS to 3.
3614 (operator) <OPERATOR DELETE '[' ']'>: Add trailing space.
3615 * cp-support.c (cp_canonicalize_string): Check NULL from
3616 cp_comp_to_string, call warning and return.
3618 2012-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3620 Fix duplicate .o files after omitting libbfd.a.
3621 * Makefile.in (ALL_TARGET_OBS): Remove corelow.o.
3622 (SFILES): Add corelow.c.
3623 (COMMON_OBS): Add corelow.o.
3624 (ALLDEPFILES): Remove corelow.c.
3625 * config/alpha/alpha-linux.mh (NATDEPFILES): Remove corelow.o.
3626 * config/alpha/alpha-osf3.mh: Likewise.
3627 * config/alpha/fbsd.mh: Likewise.
3628 * config/arm/nbsdaout.mh: Likewise.
3629 * config/arm/nbsdelf.mh: Likewise.
3630 * config/i386/i386gnu.mh: Likewise.
3631 * config/ia64/hpux.mh: Likewise.
3632 * config/ia64/linux.mh: Likewise.
3633 * config/m32r/linux.mh: Likewise.
3634 * config/m68k/linux.mh: Likewise.
3635 * config/mips/irix5.mh: Likewise.
3636 * config/mips/irix6.mh: Likewise.
3637 * config/pa/hpux.mh: Likewise.
3638 * config/pa/linux.mh: Likewise.
3639 * config/powerpc/aix.mh: Likewise.
3640 * config/sparc/linux.mh: Likewise.
3641 * config/sparc/linux64.mh: Likewise.
3642 * config/sparc/sol2.mh: Likewise.
3643 * config/vax/vax.mh: Likewise.
3644 * configure.tgt (alpha*-*-freebsd* alpha*-*-kfreebsd*-gnu)
3645 (alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu, alpha*-*-openbsd*)
3646 (am33_2.0*-*-linux*, arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-linux*)
3647 (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-netbsd*)
3648 (hppa*-*-openbsd*, i[34567]86-*-dicos*, i[34567]86-*-freebsd*)
3649 (i[34567]86-*-kfreebsd*-gnu, i[34567]86-*-netbsd*)
3650 (i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*, i[34567]86-*-nto*)
3651 (i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*)
3652 (i[34567]86-*-solaris*, i[34567]86-*-linux*, i[34567]86-*-cygwin*)
3653 (i[34567]86-*-mingw32*, m68*-*-netbsd*, m68*-*-knetbsd*-gnu)
3654 (m68*-*-openbsd*, m88*-*-openbsd*, microblaze*-linux-*)
3655 (microblaze*-*-linux*, mips*-*-linux*, mips*-*-netbsd*)
3656 (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
3657 (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-linux*)
3658 (powerpc64-*-linux*, s390*-*-*, score-*-*, sh*-*-linux*)
3659 (sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
3660 (sparc*-*-freebsd*, sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*)
3661 (sparc-*-knetbsd*-gnu, sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu)
3662 (sparc-*-openbsd*, sparc64-*-openbsd*, tic6x-*-*linux, vax-*-netbsd*)
3663 (vax-*-knetbsd*-gnu, vax-*-openbsd*, x86_64-*-dicos*, x86_64-*-linux*)
3664 (x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu, x86_64-*-netbsd*)
3665 (x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*, xtensa*-*-linux*): Remove
3666 corelow.o from gdb_target_obs.
3667 * corefile.c (core_target): Update the comment on NULL value.
3668 (core_file_command): Replace error by gdb_assert on CORE_TARGET.
3669 * corelow.c (sniff_core_bfd): Call error instead of warning on zero
3670 MATCHES. Drop YUMMY set on NULL.
3671 (core_close): Do not call exit_inferior_silent on zero PID. Do not
3672 reclaim CORE_DATA if it is already NULL.
3674 2012-01-09 Doug Evans <dje@google.com>
3676 * gdbtypes.c (safe_parse_type): Initialize type to keep gcc happy.
3677 * varobj.c (varobj_set_value): Initialize val,value to keep gcc happy.
3679 2012-01-09 Keith Seitz <keiths@redhat.com>
3681 * breakpoint.c (wrapper.h): Don't include.
3683 2012-01-09 Keith Seitz <keiths@redhat.com>
3685 * Makefile.in (SFILES): Remove wrapper.c.
3686 (HFILES_NO_SRCDIR): Remove wrapper.h.
3687 (COMMON_OBS): Remove wrapper.o.
3688 * cli/cli-interp.c: Don't inlude wrapper.h.
3689 * corelow.c: Likewise.
3690 (core_open): Replace gdb_target_find_new_threads with
3691 TRY_CATCH around target_find_new_threads.
3692 * eval.c (fetch_subexp_value): Likewise for value_fetch_lazy.
3693 * gdbtypes.c (safe_parse_type): Likewise for parse_and_eval_type.
3694 * varobj.c (varobj_create): Likewise for parse_exp_1 and
3695 evaluate_expression.
3696 (varobj_set_value): Likewise for evaluate_expression and
3698 (install_new_variable): Likewise for value_fetch_lazy.
3699 (adjust_value_for_child_access): Likewise for value_ind.
3700 (c_describe_child): Likewise for value_subscript and
3702 (c_value_of_root): Likewise for evaluate_expression.
3703 * wrapper.c: Remove.
3704 * wrapper.h: Remove.
3706 2012-01-09 Doug Evans <dje@google.com>
3708 * dwarf2read.c (read_and_check_comp_unit_head): Renamed from
3709 partial_read_comp_unit_head. Replace "buffer", "buffer_size" and
3710 "abfd" args with "section". All callers updated.
3711 Error checking code moved ...
3712 (error_check_comp_unit_head): ... here. New function.
3713 (read_and_check_type_unit_head): Renamed from read_type_unit_head.
3714 Delete arg "abfd". New arg "type_offset". All callers updated.
3715 (create_debug_types_hash_table): Simplify by using
3716 read_and_check_type_unit_head.
3718 * parser-defs.h (namecopy): Delete.
3719 * parse.c (namecopy, namecopy_size): Move into copy_name.
3721 2012-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
3723 Partially fix duplicate .o files after omitting libbfd.a.
3724 * config/alpha/alpha-osf3.mh (NATDEPFILES): Remove solib.o.
3725 * config/i386/nbsdaout.mh (NATDEPFILES): Remove solib.o.
3726 * config/i386/obsdaout.mh (NATDEPFILES): Remove solib.o.
3727 * config/m68k/nbsdaout.mh (NATDEPFILES): Remove solib.o.
3728 * config/m68k/obsd.mh (NATDEPFILES): Remove solib.o.
3729 * config/powerpc/aix.mh (NATDEPFILES): Remove xcoffread.o.
3730 * config/vax/nbsdaout.mh (NATDEPFILES): Remove solib.o.
3732 2012-01-09 Pedro Alves <palves@redhat.com>
3734 * MAINTAINERS: Update my email address.
3736 2012-01-08 Doug Evans <dje@google.com>
3738 * dwarf2read.c (dwarf2_per_objfile): Rename n_type_comp_units to
3739 n_type_units. Rename type_comp_units to all_type_units.
3741 (add_signatured_type_cu_to_table): Renamed from
3742 add_signatured_type_cu_to_list. All callers updated.
3744 * gdbtypes.h (struct cplus_struct_type): Delete member
3745 nfn_fields_total. All uses removed.
3747 2012-01-06 Doug Evans <dje@google.com>
3749 * dwarf2read.c: Move FIXME from dwarf2_build_psymtabs_hard
3751 (dwarf2_find_comp_unit): Delete.
3752 (process_psymtab_comp_unit): Make result "void".
3753 Delete args buffer, info_ptr, buffer_size, and replace with
3754 "section". All callers updated.
3755 (dwarf2_build_psymtabs_hard): Simplify.
3757 2012-01-06 Sergio Durigan Junior <sergiodj@redhat.com>
3758 Thiago Jung Bauermann <bauerman@br.ibm.com>
3760 * ada-lang.c (ada_exception_name_addr): Add `volatile' keyword
3761 before `struct gdb_exception'.
3762 * breakpoint.c (update_global_location_list_nothrow)
3763 (update_breakpoint_locations, enable_breakpoint_disp): Likewise.
3764 * cp-abi.c (value_rtti_type): Likewise.
3765 * cp-support.c (cp_validate_operator): Likewise.
3766 * infrun.c (insert_exception_resume_breakpoint)
3767 (check_exception_resume, keep_going): Likewise.
3768 * mi-interp.c (mi_breakpoint_created)
3769 (mi_breakpoint_modified): Likewise.
3770 * rs6000-aix-tdep.c (rs6000_convert_from_func_ptr_addr): Likewise.
3771 * solib-ia64-hpux.c (ia64_hpux_at_dld_breakpoint_p)
3772 (ia64_hpux_handle_dld_breakpoint_1): Likewise.
3774 2012-01-05 Doug Evans <dje@google.com>
3776 * dwarf2read.c (statement_prologue): Delete, unused.
3778 * dwarf2read.c (dwarf2_per_cu_addr_size): Make result type an int.
3779 * dwarf2loc.h (dwarf2_per_cu_addr_size): Update.
3781 * dwarf2read.c (comp_unit_header): Delete, unused.
3783 2012-01-05 Ulrich Weigand <uweigand@de.ibm.com>
3785 * configure.tgt [s390*-*-*] (gdb_target_obs): Add corelow.o.
3786 * config/s390/s390.mh (NATDEPFILES): Remove corelow.o.
3788 2012-01-05 Khoo Yit Phang <khooyp@cs.umd.edu>
3790 * infrun.c (normal_stop): Don't skip calling the normal_stop
3791 observers if the thread was doing a multi-step, but stopped for
3792 some reason other than stepping.
3794 2012-01-05 Pedro Alves <alves.ped@gmail.com>
3796 * cli/cli-decode.h: Add comments.
3797 (CMD_LIST_AMBIGUOUS): Moved to command.h
3798 (add_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd)
3799 (set_cmd_cfunc, set_cmd_sfunc, set_cmd_completer, cmd_cfunc_eq)
3800 (set_cmd_context, get_cmd_context, lookup_cmd, lookup_cmd_1)
3801 (deprecate_cmd, deprecated_cmd_warning, lookup_cmd_composition)
3802 (add_com, add_com_alias, add_info, add_info_alias)
3803 (complete_on_cmdlist, complete_on_enum, help_list): Remove
3805 * command.h: Add and adjust comments.
3806 (CMD_LIST_AMBIGUOUS): Moved here.
3807 (help_cmd, help_cmd_list): Delete declarations.
3809 2012-01-04 Doug Evans <dje@google.com>
3811 * dwarf2read.c (dwarf2_read_abbrevs): Delete arg "abfd".
3812 All callers updated.
3813 (load_full_type_unit): Renamed from read_signatured_type_at_offset.
3814 Replace all arguments with "per_cu". All callers updated.
3816 * dwarf2read.c (dwarf2_per_cu_data): Remove outdated comment.
3818 * dwarf2read.c (init_one_comp_unit): Delete arg "objfile".
3819 New arg "per_cu". All callers updated.
3821 Delete #if 0'd out code.
3822 * language.c (binop_result_type): Delete.
3823 (simple_type, ordered_type, same_type, integral_type): Delete.
3824 (numeric_type, character_type, string_type, boolean_type): Delete.
3825 (float_type, structured_type): Delete.
3826 * language.h: Update.
3828 2012-01-04 Tom Tromey <tromey@redhat.com>
3830 * python/py-value.c (valpy_binop): Initialize 'res_val'.
3832 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3834 * corefile.c (close_exec_file): Delete.
3835 (reopen_exec_file): Remove commented out code that seems related
3836 to close_exec_file, which is being deleted here.
3837 * inferior.h (close_exec_file): Delete.
3838 * fork-child.c (fork_inferior): Remove call to fork_inferior.
3840 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3842 * ada-lang.c: #include "cli/cli-utils.h".
3843 (get_selections): Use skip_spaces.
3844 (ada_get_next_arg): Use skip_spaces and skip_to_space.
3845 (catch_ada_exception_command_split): Use skip_spaces.
3846 (ada_decode_assert_location): Likewise.
3848 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3850 * linespec.c (decode_line_internal): Check for C++ or Java
3851 compound constructs only if the current language is C, C++
3854 2012-01-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3857 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3858 Joel Brobecker <brobecker@adacore.com>
3859 Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
3860 * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
3862 * infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
3863 fall through into AT_ENTRY_POINT.
3864 (call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
3866 * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
3867 PPC_INSN_SIZE skip to 3 times.
3869 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3871 * linespec.c (add_minsym): Preserve function descriptors.
3873 2012-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3875 * breakpoint.c (all_locations_are_pending): Consider locations
3876 in program spaces executing during startup pending as well.
3878 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3880 Copyright year update in most files of the GDB Project.
3882 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3884 * copyright.sh: Delete.
3885 * copyright.py: Rewrite.
3887 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3889 * gnulib/extra/update-copyright: New file, imported from gnulib.
3891 2012-01-04 Joel Brobecker <brobecker@adacore.com>
3893 * README (Copyright and License Notices): New section.
3895 2012-01-03 Tom Tromey <tromey@redhat.com>
3898 * python/py-value.c (valpy_dereference, valpy_get_address
3899 valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast)
3900 (valpy_getitem, valpy_call, valpy_binop, valpy_negative)
3901 (valpy_absolute, valpy_richcompare): Free intermediate values.
3903 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3905 * ada-lang.c: Reformat the copyright notice.
3907 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3909 * Makefile.in (ALL_TARGET_OBS): Remove solib-target.o.
3910 * configure.tgt (arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-symbianelf*)
3911 (i[34567]86-*-dicos*, i[34567]86-*-cygwin*, i[34567]86-*-mingw32*)
3912 (x86_64-*-dicos*, x86_64-*-mingw*): Remove solib-target.o.
3913 Revert this part of:
3914 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3915 Build gdb directly from *.o files not using libgdb.a.
3916 * Makefile.in (COMMON_OBS): Remove solib-target.o.
3918 2012-01-02 Joel Brobecker <brobecker@adacore.com>
3920 * gdb/common/gdb_thread_db.h, gdb/dbxread.c, gdb/environ.c,
3921 gdb/gcore.h, gdb/rs6000-tdep.h, gdb/s390-nat.c, gdb/tic6x-tdep.c:
3922 Reformat the copyright header.
3924 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3926 Revert this part of:
3927 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3928 Remove the gdbtui binary.
3929 * gdb.c (main): Remove args.interpreter_p initialization.
3930 * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
3931 * main.h (struct captured_main_args): Remove interpreter_p.
3933 2012-01-02 Joel Brobecker <brobecker@adacore.com>
3935 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2011.
3937 2012-01-02 Joel Brobecker <brobecker@adacore.com>
3939 * top.c (print_gdb_version): Update copyright year.
3941 2012-01-02 Yao Qi <yao@codesourcery.com>
3943 * inf-ptrace.c (inf_ptrace_xfer_partial): Reindent.
3945 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3946 Joel Brobecker <brobecker@adacore.com>
3948 Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
3949 * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
3951 * infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
3952 fall through into AT_ENTRY_POINT.
3953 (call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
3955 * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
3956 PPC_INSN_SIZE skip to 3 times.
3958 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3960 * amd64-linux-nat.c (update_debug_registers_callback): New comment on
3962 * i386-linux-nat.c (update_debug_registers_callback): Likewise.
3964 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3966 Build gdb directly from *.o files not using libgdb.a.
3967 * Makefile.in (SUBDIR_TUI_OBS): Remove duplicate tui.o.
3968 (COMMON_OBS): Remove solib-target.o.
3969 (LIBGDB_OBS, libgdb.a): Move it before the gdb$(EXEEXT) rule.
3970 (gdb$(EXEEXT)): Replace libgdb.a with $(LIBGDB_OBS).
3971 (LIBGDB_OBS, libgdb.a): Move it above.
3972 * configure.tgt (alpha*-*-linux*, alpha*-*-freebsd*)
3973 (alpha*-*-kfreebsd*-gnu, alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu)
3974 (alpha*-*-openbsd*, am33_2.0*-*-linux*, arm*-wince-pe)
3975 (arm*-*-mingw32ce*, arm*-*-linux*, arm*-*-netbsd*, arm*-*-knetbsd*-gnu)
3976 (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-linux*)
3977 (hppa*-*-netbsd*, hppa*-*-openbsd*, i[34567]86-*-darwin*)
3978 (i[34567]86-*-dicos*, i[34567]86-*-freebsd*, i[34567]86-*-kfreebsd*-gnu)
3979 (i[34567]86-*-netbsd*, i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*)
3980 (i[34567]86-*-nto*, i[34567]86-*-solaris2.1[0-9]*)
3981 (x86_64-*-solaris2.1[0-9]*, i[34567]86-*-solaris*, i[34567]86-*-linux*)
3982 (i[34567]86-*-gnu*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*)
3983 (m68*-*-netbsd*, m68*-*-knetbsd*-gnu, m68*-*-openbsd*)
3984 (microblaze*-linux-*, microblaze*-*-linux*, mips*-sgi-irix5*)
3985 (mips*-sgi-irix6*, mips*-*-linux*, mips*-*-netbsd*)
3986 (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
3987 (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-aix*, rs6000-*-*)
3988 (powerpc-*-linux*, powerpc64-*-linux*, powerpc*-*-*, s390*-*-*)
3989 (sh*-*-linux*, sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
3990 (sparc-*-linux*, sparc64-*-linux*, sparc*-*-freebsd*)
3991 (sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*, sparc-*-knetbsd*-gnu)
3992 (sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu, sparc-*-openbsd*)
3993 (sparc64-*-openbsd*, sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*)
3994 (sparc-*-solaris2*, sparcv9-*-solaris2*, sparc64-*-solaris2*)
3995 (vax-*-netbsd*, vax-*-knetbsd*-gnu, x86_64-*-darwin*, x86_64-*-dicos*)
3996 (x86_64-*-linux*, x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu)
3997 (x86_64-*-netbsd*, x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*)
3998 (xtensa*-*-linux*, xtensa*): Remove solib.o from gdb_target_obs.
4000 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
4002 Remove the gdbtui binary.
4003 * .gitignore (/gdbtui): Remove.
4004 * Makefile.in (TUI): Remove.
4005 (SUBDIR_TUI_OBS): Remove tui-main.o.
4006 (SUBDIR_TUI_SRCS): Remove tui/tui-main.c.
4007 (all-tui, install-tui, uninstall-tui, $(TUI)$(EXEEXT), clean-tui)
4008 (tui-main.o): Remove.
4009 (all_object_files): Remove tui-main.o.
4010 * NEWS: New note for the gdbtui removal.
4011 * configure: Rebuilt.
4012 * configure.ac: No longer add all-tui, clean-tui, install-tui and
4013 uninstall-tui to CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL and
4014 CONFIG_UNINSTALL respectively.
4015 * gdb.c (main): Remove args.interpreter_p initialization.
4016 * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
4017 * main.h (struct captured_main_args): Remove interpreter_p.
4018 * tui/tui-main.c: Remove.
4020 2012-01-01 Doug Evans <dje@google.com>
4022 * dwarf2read.c (dwarf2_compute_name): Simplify objfile references.
4023 (dwarf2_physname, read_import_statement): Ditto.
4024 (read_call_site_scope, dwarf2_record_block_ranges): Ditto.
4025 (process_structure_scope read_subroutine_type): Ditto.
4026 (read_typedef, load_partial_dies, read_partial_die): Ditto.
4027 (find_partial_die, dwarf_decode_lines, lookup_die_type): Ditto.
4028 (dwarf2_fetch_die_location_block): Ditto.
4029 (dwarf_decode_macros, dwarf2_symbol_mark_computed): Ditto.
4031 * dwarf2read.c (read_signatured_type): Delete `objfile' arg.
4032 All callers updated.
4033 (load_full_comp_unit, queue_comp_unit, process_queue): Ditto.
4034 (dw2_do_instantiate_symtab, dw2_instantiate_symtab): Ditto.
4035 (process_psymtab_comp_unit, load_partial_comp_unit): Ditto.
4037 * dwarf2read.c (load_cu): Move assert to more useful location.
4039 * dwarf2read.c (free_heap_comp_unit): Renamed from free_one_comp_unit.
4040 All callers updated.
4042 * dwarf2read.c (dwarf2_per_objfile): Add comment.
4043 (dwarf2_elf_names): Minor reformat.
4044 (dwarf2_per_cu_data): Tweak comment.
4045 (dwarf2_read_section): Fix comment.
4046 (create_all_comp_units): Fix comment.
4047 (load_full_comp_unit): Fix comment.
4048 (process_full_comp_unit): Fix comment.
4049 (read_signatured_type): Fix comment.
4051 For older changes see ChangeLog-2011.
4057 version-control: never
projects / deliverable / binutils-gdb.git / blob