1 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
3 * tui/tui-regs.c (tui_reg_prev_command): New function.
4 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
5 * reggroups.c (reggroup_prev): New function.
6 * reggroups.h (reggroup_prev): Add declaration. Update comment.
8 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
9 Yao Qi <yao.qi@linaro.org>
11 * aarch64-linux-tdep.c: Include linux-record.h and
13 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
14 (aarch64_syscall): New enum.
15 (aarch64_canonicalize_syscall): New function.
16 (aarch64_all_but_pc_registers_record): New function.
17 (aarch64_linux_syscall_record): New function.
18 (aarch64_linux_init_abi): Install AArch64 process record
19 handler. Update to handle syscall recording.
20 * aarch64-tdep.c: Include record.h and record-full.h.
21 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
22 (struct aarch64_mem_r): Define.
23 (aarch64_record_result): New enum.
24 (struct insn_decode_record): Define.
25 (insn_decode_record): New typedef.
26 (aarch64_record_data_proc_reg): New function.
27 (aarch64_record_data_proc_imm): New function.
28 (aarch64_record_branch_except_sys): New function.
29 (aarch64_record_load_store): New function.
30 (aarch64_record_data_proc_simd_fp): New function.
31 (aarch64_record_asimd_load_store): New function.
32 (aarch64_record_decode_insn_handler): New function.
33 (deallocate_reg_mem): New function.
34 (aarch64_process_record): New function.
35 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
37 (aarch64_process_record): New extern declaration.
38 * configure.tgt: Add linux-record.o to gdb_target_obs.
39 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
41 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
43 * NEWS: Add a note on process record-replay support on aarch64*-linux*
46 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
48 * amd64-tdep.c: Replace in_function_epilogue_p with
49 stack_frame_destroyed_p throughout.
50 * arch-utils.c: Ditto.
51 * arch-utils.h: Ditto.
53 * breakpoint.c: Ditto.
58 * nios2-tdep.c: Ditto.
59 * rs6000-tdep.c: Ditto.
60 * s390-linux-tdep.c: Ditto.
61 * score-tdep.c: Ditto.
63 * sparc-tdep.c: Ditto.
64 * sparc-tdep.h: Ditto.
65 * sparc64-tdep.c: Ditto.
67 * tic6x-tdep.c: Ditto.
68 * tilegx-tdep.c: Ditto.
69 * xstormy16-tdep.c: Ditto.
70 * gdbarch.c, gdbarch.h: Re-generated.
72 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
74 * NEWS: Mention 'tui enable' and 'tui disable'.
75 * tui/tui.c (tui_enable_command): New function.
76 (tui_disable_command): New function.
77 (_initialize_tui): New function.
79 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
81 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
83 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
85 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
88 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
90 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
92 (tui_set_layout_for_display_command): ...here, before calling
93 tui_set_layout. Only set the layout if gdb has not already
94 entered the TUI_FAILURE state.
96 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
98 * tui/tui-layout.c (layout_completer): New function.
99 (_initialize_tui_layout): Set completer on layout command.
101 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
103 * tui/tui-layout.c (tui_set_layout): Remove
104 tui_register_display_type parameter. Remove all checking of this
105 parameter, and reindent function. Update header comment.
106 (tui_set_layout_for_display_command): Rename to...
107 (tui_set_layout_by_name): ...this, and don't check for different
108 register class types, don't pass a tui_register_display_type to
109 tui_set_layout. Update header comment.
110 (layout_names): Remove register set specific names.
111 * tui/tui-layout.h (tui_set_layout): Remove
112 tui_register_display_type parameter.
113 * tui/tui.c (tui_rl_change_windows): Don't pass a
114 tui_register_display_type to tui_set_layout.
115 (tui_rl_delete_other_windows): Likewise.
116 (tui_enable): Likewise.
117 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
118 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
119 (TUI_GENERAL_REGS_NAME): Remove.
120 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
121 (TUI_SPECIAL_REGS_NAME): Remove.
122 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
123 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
124 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
125 (enum tui_register_display_type): Remove.
126 (struct tui_layout_def): Remove regs_display_type and
127 float_regs_display_type fields.
128 (struct tui_data_info): Remove regs_display_type field.
129 (tui_layout_command): Use new name for
130 tui_set_layout_for_display_command.
131 * tui/tui-data.c (layout_def): Don't initialise removed fields.
132 (tui_clear_win_detail): Don't initialise removed fields of
134 * tui/tui-regs.c (tui_show_registers): Use new name for
135 tui_set_layout_for_display_command.
136 * tui/tui.h (tui_set_layout_for_display_command): Rename
138 (tui_set_layout_by_name): ...this.
139 * printcmd.c (display_command): Remove tui related layout call,
142 2015-05-20 Joel Brobecker <brobecker@adacore.com>
144 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
145 (handle_inferior_event): New function.
147 2015-05-20 Joel Brobecker <brobecker@adacore.com>
149 * ada-lang.c (to_fixed_array_type): Rename local variable
150 typename into type_name.
152 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
154 Fix ASAN crash for gdb.compile/compile.exp.
155 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
157 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
159 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
160 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
161 * compile/compile-object-load.c (setup_sections, compile_object_load):
163 * compile/compile.c (compile_to_object): Likewise.
165 2015-05-16 Doug Evans <xdje42@gmail.com>
167 * NEWS: Mention support for unbuffered Guile memory ports.
168 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
169 (ioscm_lseek_address): Improve overflow calculation.
170 (gdbscm_memory_port_fill_input): Add assert.
171 (gdbscm_memory_port_write): Handle unbuffered ports.
172 Handle large writes identical to Guile's fport_write.
173 (gdbscm_memory_port_seek): Fix seeking past end check.
174 (gdbscm_memory_port_close): Handle closing unbuffered port.
175 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
176 (ioscm_init_memory_port): Handle unbuffered ports.
177 (ioscm_reinit_memory_port): Ditto.
178 (ioscm_init_memory_port): Update size calculation.
179 (gdbscm_open_memory): Support zero sized ports.
181 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
183 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
184 variable compiler warnings.
186 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
188 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
190 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
191 Phil Muldoon <pmuldoon@redhat.com>
193 * NEWS (Changes since GDB 7.9): Add compile print.
194 * compile/compile-c-support.c (add_code_header, add_code_footer)
195 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
196 COMPILE_I_PRINT_VALUE_SCOPE.
197 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
198 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
200 * compile/compile-object-load.c: Include block.h.
201 (get_out_value_type): New function.
202 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
203 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
205 * compile/compile-object-load.h (struct compile_module): Add fields
206 out_value_addr and out_value_type.
207 * compile/compile-object-run.c: Include valprint.h and compile.h.
208 (struct do_module_cleanup): Add fields out_value_addr and
210 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
211 COMPILE_I_PRINT_VALUE_SCOPE.
212 (compile_object_run): Propagate out_value_addr and out_value_type.
214 * compile/compile.c: Include valprint.h.
215 (compile_print_value, compile_print_command): New functions.
216 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
217 (_initialize_compile): Update compile code help text. Install
218 compile_print_command.
219 * compile/compile.h (compile_print_value): New prototype.
220 * defs.h (enum compile_i_scope_types): Add
221 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
223 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
225 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
226 Rely on its parameter count.
227 (compile_object_load): Replace lookup_minimal_symbol_text by
228 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
230 * compile/compile-object-load.h (struct compile_module): Replace
231 func_addr by func_sym.
232 * compile/compile-object-run.c: Include block.h.
233 (compile_object_run): Reset module variable after it is freed. Use
234 FUNC_SYM instead of FUNC_ADDR. Rely on it.
236 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
238 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
239 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
240 (c_compute_program): Call generate_register_struct after typedefs.
241 * compile/compile-loc2c.c (push, pushf_register_address)
242 (pushf_register): Cast to GCC_UINTPTR.
243 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
244 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
245 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
246 * compile/compile.c (_initialize_compile): Enable warnings for
249 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
251 * cli/cli-script.c (execute_control_command): Update
252 eval_compile_command caller.
253 * compile/compile-object-load.c (compile_object_load): Add parameters
254 scope and scope_data. Set them.
255 * compile/compile-object-load.h (struct compile_module): Add fields
256 scope and scope_data.
257 (compile_object_load): Add parameters scope and scope_data.
258 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
259 scope and scope_data.
260 (compile_object_run): Propagate the fields scope and scope_data.
261 * compile/compile.c (compile_file_command, compile_code_command):
262 Update eval_compile_command callers.
263 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
264 * compile/compile.h (eval_compile_command): Add parameter scope_data.
265 * defs.h (struct command_line): Add field scope_data.
267 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
269 * printcmd.c (struct format_data): Move it to valprint.h.
270 (print_command_parse_format, print_value): New functions from ...
271 (print_command_1): ... here. Call them.
272 * valprint.h (struct format_data): Move it here from printcmd.c.
273 (print_command_parse_format, print_value): New declarations.
275 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
277 * compile/compile-object-load.c (compile_object_load): Add
278 COMPILE_DEBUG message.
280 2015-05-15 Jerome Guitton <guitton@adacore.com>
282 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
283 index to get element instead of enum value.
284 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
285 of index to compute length, but enum values to compute bounds.
286 (ada_array_length): Use enum position of index instead of enum value.
287 (pos_atr): Move position computation to...
288 (ada_evaluate_subexp): Use enum values to compute bounds.
289 * gdbtypes.c (discrete_position): ...this new function.
290 * gdbtypes.h (discrete_position): New function declaration.
291 * valprint.c (val_print_array_elements): Call discrete_position
292 to handle array indexed by non-contiguous enumeration types.
294 2015-05-15 Jerome Guitton <guitton@adacore.com>
296 * ada-lang.c (find_parallel_type_by_descriptive_type):
297 Go through typedefs during lookup.
298 (to_fixed_array_type): Add support for non-bit packed arrays
299 as variable-length fields.
301 2015-05-15 Pedro Alves <palves@redhat.com>
302 Simon Marchi <simon.marchi@ericsson.com>
304 * event-loop.c (gdb_notifier) <next_file_handler,
305 next_poll_fds_index>: New fields.
306 (get_next_file_handler_to_handle_and_advance): New function.
307 (delete_file_handler): If deleting the next file handler to
308 handle, advance to the next file handler.
309 (gdb_wait_for_event): Bail early if no event fired. Poll file
310 handlers in round-robin fashion.
312 2015-05-15 Pedro Alves <palves@redhat.com>
314 * linux-tdep.c (linux_find_memory_regions_full): Rename local
317 2015-05-15 Pedro Alves <palves@redhat.com>
319 * nat/linux-nat.h: Include "target/waitstatus.h".
321 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
323 * python/py-unwind.c (struct reg_info): Move out of ...
324 (struct cached_frame_info): ... this scope.
325 (pending_frame_object_type, unwind_info_object_type): Make extern.
327 2015-05-15 Joel Brobecker <brobecker@adacore.com>
329 * ada-lang.c (ada_value_primitive_packed_val): Make sure
330 accumSize is never negative.
332 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
334 * tui/tui-command.c: Remove include of <ctype.h>.
335 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
337 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
339 * dwarf2read.c (die_needs_namespace): Return 1 for
340 DW_TAG_inlined_subroutine.
342 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
344 * regcache.c (regcache_cpy_no_passthrough): New declaration.
345 (regcache_cpy_no_passthrough): Make it static, add function comment.
346 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
347 (regcache_cpy_no_passthrough): Remove declaration.
349 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
351 * gdbthread.h (struct thread_control_state): Update comment for
353 * infcall.c (run_inferior_call): Update comment about
355 * infcmd.c (get_return_value): Update comment about stop_registers.
356 (finish_forward): Update comment about proceed_to_finish.
357 * infrun.c (stop_registers): Remove.
358 (clear_proceed_status, normal_stop): Remove stop_registers handling.
359 * infrun.h (stop_registers): Remove.
361 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
363 * infcall.c (struct dummy_frame_context_saver)
364 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
365 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
366 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
368 (call_function_by_hand_dummy): Move discard_cleanups of
369 inf_status_cleanup before dummy_frame_push. Call
370 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
371 Use dummy_frame_context_saver_get_regs instead of stop_registers.
372 * infcall.h (struct dummy_frame_context_saver)
373 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
374 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
376 * infcmd.c: Include infcall.h.
377 (get_return_value): Add parameter ctx_saver, use it instead of
379 (print_return_value): Add parameter ctx_saver, pass it.
380 (struct finish_command_continuation_args): Add field ctx_saver.
381 (finish_command_continuation): Update print_return_value caller.
382 (finish_command_continuation_free_arg): Free also ctx_saver.
383 (finish_forward): Call dummy_frame_context_saver_setup.
384 * inferior.h (struct dummy_frame_context_saver): New declaration.
385 (get_return_value): Add parameter ctx_saver.
386 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
387 get_return_value caller.
389 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
391 * dummy-frame.c (struct dummy_frame_dtor_list): New.
392 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
393 (remove_dummy_frame): Process dtor_list.
394 (pop_dummy_frame): Process dtor_list.
395 (register_dummy_frame_dtor): Maintain dtor_list.
396 (find_dummy_frame_dtor): Handle dtor_list.
397 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
400 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
402 * compile/compile-object-run.c (do_module_cleanup): Add parameter
404 (compile_object_run): Update do_module_cleanup caller.
405 * dummy-frame.c: Include infcall.h.
406 (struct dummy_frame): Update dtor comment.
407 (remove_dummy_frame): Call dtor.
408 (pop_dummy_frame): Update dtor caller.
409 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
412 2015-05-13 Joel Brobecker <brobecker@adacore.com>
416 2015-05-13 Joel Brobecker <brobecker@adacore.com>
418 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
419 Xmethods now being able to specify a result type to that new
422 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
424 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
425 first before resizing the window.
426 * tui/tui.c (tui_enable): Likewise.
428 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
430 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
431 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
432 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
433 dummy_dtor parameter.
434 * infcall.h: Include dummy-frame.h.
435 (call_function_by_hand_dummy_dtor_ftype): Remove.
436 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
439 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
442 * top.c (history_size_setshow_var): Change type to signed.
443 Initialize to -2. Update documentation.
444 (set_readline_history_size): Define.
445 (set_history_size_command): Use it. Remove logic for handling
447 (init_history): Use set_readline_history_size(). Test for a
448 value of -2 instead of 0 when determining whether to set a
449 default history size.
450 (init_main): Decode the argument of the "size" command as a
453 2015-05-12 Doug Evans <dje@google.com>
455 * dwarf2read.c (struct file_entry): Tweak comments.
456 (get_debug_line_section): Tweak comments.
458 2015-05-12 Don Breazeal <donb@codesourcery.com>
460 * NEWS: Announce fork support in the RSP and support
461 for fork debugging in extended mode.
463 2015-05-12 Don Breazeal <donb@codesourcery.com>
465 * remote.c (remote_insert_fork_catchpoint): New function.
466 (remote_remove_fork_catchpoint): New function.
467 (remote_insert_vfork_catchpoint): New function.
468 (remote_remove_vfork_catchpoint): New function.
469 (pending_fork_parent_callback): New function.
470 (remove_new_fork_child): New function.
471 (remote_update_thread_list): Call remote_notif_get_pending_events
472 and remove_new_fork_child.
473 (extended_remote_kill): Kill fork child when killing the
474 parent before follow_fork completes.
475 (init_extended_remote_ops): Initialize target vector with
476 new fork catchpoint functions.
478 2015-05-12 Don Breazeal <donb@codesourcery.com>
480 * remote.c (remove_vfork_event_p): New function.
481 (remote_follow_fork): Add vfork event type to event checking.
482 (remote_parse_stop_reply): New stop reasons "vfork" and
483 "vforkdone" for RSP 'T' Stop Reply Packet.
485 2015-05-12 Don Breazeal <donb@codesourcery.com>
487 * linux-nat.c (linux_nat_ptrace_options): New function.
488 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
489 Call linux_nat_ptrace_options and use different argument to
490 linux_enable_event_reporting.
491 (_initialize_linux_nat): Delete call to
492 linux_ptrace_set_additional_flags.
493 * nat/linux-ptrace.c (current_ptrace_options): Rename to
494 supported_ptrace_options.
495 (additional_flags): Delete variable.
496 (linux_check_ptrace_features): Use supported_ptrace_options.
497 (linux_test_for_tracesysgood, linux_test_for_tracefork):
498 Likewise, and remove additional_flags check.
499 (linux_enable_event_reporting): Change 'attached' argument to
500 'options'. Use supported_ptrace_options.
501 (ptrace_supports_feature): Change comment. Use
502 supported_ptrace_options.
503 (linux_ptrace_set_additional_flags): Delete function.
504 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
505 Delete function prototype.
506 * remote.c (remote_fork_event_p): New function.
507 (remote_detach_pid): New function.
508 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
509 if doing detach-on-fork.
510 (remote_follow_fork): New function.
511 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
512 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
513 (init_extended_remote_ops): Initialize to_follow_fork.
515 2015-05-12 Don Breazeal <donb@codesourcery.com>
517 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
518 from static to extern.
519 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
520 * remote.c (anonymous enum): <PACKET_fork_event_feature,
521 * PACKET_vfork_event_feature>: New enumeration constants.
522 (remote_protocol_features): Add table entries for new packets.
523 (remote_query_supported): Add new feature queries to qSupported
526 2015-05-12 Gary Benson <gbenson@redhat.com>
528 * remote.c (remote_add_inferior): Call exec_file_locate_attach
529 for fake PIDs as well as real ones.
530 (remote_pid_to_exec_file): Send empty annex if PID is fake.
532 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
534 * NEWS (Python Scripting): Mention the new gdb.Value methods.
535 * python/py-value.c (valpy_reference_value): New function.
536 (valpy_const_value): Likewise.
537 (value_object_methods): Add new methods.
538 * value.c (make_cv_value): New function.
539 * value.h (make_cv_value): Declare.
541 2015-05-08 Yao Qi <yao@codesourcery.com>
542 Sandra Loosemore <sandra@codesourcery.com>
544 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
545 to 'lh->include_dirs' before accessing to it.
546 (psymtab_include_file_name): Likewise.
547 (dwarf_decode_lines_1): Likewise.
548 (dwarf_decode_lines): Likewise.
549 (file_file_name): Likewise.
551 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
553 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
554 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
555 (nios2_linux_rt_sigreturn_init): Adjust base address of
558 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
560 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
561 "trap 31" as the breakpoint instruction on all targets.
563 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
565 * infcmd.c (print_return_value): Remove unused declaration.
567 2015-05-08 Joel Brobecker <brobecker@adacore.com>
569 * dwarf2read.c (attr_to_dynamic_prop)
570 <DW_AT_data_member_location>: Use read_type_die isntead of
573 2015-05-08 Joel Brobecker <brobecker@adacore.com>
575 * ada-lang.c (ada_convert_actual): Add handling of formals
576 passed inside an aligner type.
578 2015-05-08 Joel Brobecker <brobecker@adacore.com>
580 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
582 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
585 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
586 Print xmethod matcher status.
588 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
590 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
591 register in the regcache when treating the PSWM register, and vice
594 2015-05-07 Gary Benson <gbenson@redhat.com>
596 * linux-thread-db.c (struct thread_db_info)
597 <td_ta_map_id2thr_p>: Remove field.
598 (try_thread_db_load_1): Remove initialization for the above.
600 2015-05-07 Gary Benson <gbenson@redhat.com>
602 * linux-thread-db.c (struct thread_db_info)
603 <td_thr_validate_p>: Remove field.
604 (try_thread_db_load_1): Remove initialization for the above.
606 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
608 * compile/compile-object-load.c (compile_object_load): Support
611 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
613 * compile/compile.c (compile_to_object): Make the cmd_string parameter
614 const. Use new variables for the const compatibility.
615 (eval_compile_command): Make the cmd_string parameter const.
616 * compile/compile.h (eval_compile_command): Make the cmd_string
619 2015-05-06 Joel Brobecker <brobecker@adacore.com>
621 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
623 * top.c (deprecated_init_ui_hook): Delete.
624 (gdb_init): Remove handling of deprecated_init_ui_hook.
625 * interps.c (clear_interpreter_hooks): Remove handling of
626 deprecated_init_ui_hook.
627 * main.c (captured_main): Update comment.
629 2015-05-06 Joel Brobecker <brobecker@adacore.com>
631 * solib.c (_initialize_solib): Add "info dll" alias creation.
632 * windows-nat.c (set_windows_aliases): Delete.
633 (_initialize_windows_nat): Remove deprecated_init_ui_hook
635 * NEWS: Add news entry about "info dll" now being available
638 2015-05-05 Joel Brobecker <brobecker@adacore.com>
640 * ada-lang.c (value_assign_to_component): Reformat and improve
641 documentation. Remove all trailing spaces.
643 2015-05-05 Joel Brobecker <brobecker@adacore.com>
645 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
646 Stop counting inlined frames as soon as an out-of-line function
649 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
651 * dwarf2read.c (inherit_abstract_dies): Skip
652 DW_TAG_GNU_call_site dies while inheriting children of an
653 abstract DIE into a scope.
654 (read_lexical_block_scope): Inherit abstract DIE's for
657 2015-05-05 Joel Brobecker <brobecker@adacore.com>
659 * ada-valprint.c (val_print_packed_array_elements): Delete
660 variable "len". Add a type-length check when comparing two
661 consecutive elements of the array. Use the element's actual
662 length in call to value_contents_eq.
663 * ada-lang.c (ada_value_primitive_packed_val): Always return
664 a value whose type has been resolved.
666 2015-05-05 Joel Brobecker <brobecker@adacore.com>
668 * ada-lang.c (ada_value_primitive_packed_val): Recompute
669 BIT_SIZE and LEN if the size of the resolved type is smaller
670 than BIT_SIZE * HOST_CHAR_BIT.
672 2015-05-05 Joel Brobecker <brobecker@adacore.com>
674 * ada-lang.c (ada_value_primitive_packed_val): Use a more
675 correct address in call to value_at. Adjust call to
676 value_address accordingly.
678 2015-05-05 Joel Brobecker <brobecker@adacore.com>
680 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
683 2015-05-05 Joel Brobecker <brobecker@adacore.com>
685 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
686 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
688 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
689 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
690 (resolve_dynamic_type_internal): Set pinfo.valaddr.
691 Add handling of addr_stack->valaddr.
692 (resolve_dynamic_type): Add "valaddr" parameter.
693 Set pinfo.valaddr field.
694 * ada-lang.c (ada_discrete_type_high_bound): Update call to
695 resolve_dynamic_type.
696 (ada_discrete_type_low_bound): Likewise.
697 * findvar.c (default_read_var_value): Likewise.
698 * value.c (value_from_contents_and_address): Likewise.
700 2015-05-05 Joel Brobecker <brobecker@adacore.com>
702 * gdbtypes.c (resolve_dynamic_array): Use
703 create_array_type_with_stride instead of create_array_type.
705 2015-04-30 DJ Delorie <dj@redhat.com>
707 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
710 2015-04-29 Doug Evans <dje@google.com>
713 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
714 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
715 EVAL_AVOID_SIDE_EFFECTS for xmethods.
716 * extension-priv.h (struct extension_language_ops)
717 <get_xmethod_result_type>: New member.
718 * extension.c (get_xmethod_result_type): New function.
719 * extension.h (get_xmethod_result_type): Declare.
720 * python/py-xmethods.c (get_result_type_method_name): New static
722 (py_get_result_type_method_name): Ditto.
723 (gdbpy_get_xmethod_result_type): New function.
724 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
725 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
726 * python/python.c (python_extension_ops): Add
727 gdbpy_get_xmethod_result_type.
728 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
729 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
731 (value_x_unop): Ditto.
732 * value.c (result_type_of_xmethod): New function.
733 * value.h (result_type_of_xmethod): Declare.
735 2015-04-29 Gary Benson <gbenson@redhat.com>
737 * solib.c (solib_find_1): Allow fd argument to be NULL.
738 (exec_file_find): Update comment.
739 (solib_find): Likewise.
740 * exec.c (exec_file_locate_attach): Use NULL as fd
741 argument to exec_file_find to avoid having to close
743 * infrun.c (follow_exec): Likewise.
745 2015-04-28 Doug Evans <dje@google.com>
748 * python/lib/gdb/printing.py (register_pretty_printer): Handle
749 name or __name__ attributes. Handle gdb module as first argument.
751 2015-04-28 Doug Evans <dje@google.com>
754 * python/py-prettyprint.c (print_children): Verify result of children
755 iterator. Provide better error message.
756 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
757 * python/python.c (gdbpy_print_python_errors_p): New function.
759 2015-04-28 Doug Evans <dje@google.com>
761 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
763 2015-04-28 Sasha Smundak <asmundak@google.com>
765 * NEWS: Mention gdb.Type.optimized_out method.
766 * python/py-type.c (typy_optimized_out): New function.
768 2015-04-28 John Baldwin <jhb@FreeBSD.org>
770 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
772 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
774 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
775 (initialize_utils): Move call of init_page_info() to ...
776 * top.c (gdb_init): ... here.
778 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
780 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
781 (tui_sigwinch_handler): Still update our idea of
782 the terminal's width and height even when TUI is not active.
784 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
786 * utils.h (set_screen_width_and_height): Declare.
787 * utils.c (set_screen_width_and_height): Define.
788 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
790 2015-04-28 Gary Benson <gbenson@redhat.com>
792 * infrun.c (solist.h): New include.
793 (follow_exec): Use exec_file_find to prefix execd_pathname
796 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
798 * tui/tui-source.c (tui_set_source_content): Avoid calling
799 strcpy() when offset is 0.
801 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
804 * tui/tui-data.c (tui_free_window): Don't free the locator
805 window when passed an SRC_WIN or a DISASSEM_WIN.
807 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
809 * tui/tui-data.h (struct tui_win_element): Forward-declare.
810 (tui_win_content): Move declaration.
811 (struct tui_gen_win_info): Give 'content' field the
812 type tui_win_content.
813 * tui/tui-data.c (init_content_element): Remove redundant and
815 (tui_add_content_elements): Remove erroneous cast.
816 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
818 (tui_get_begin_asm_address): Likewise.
819 * tui/tui-regs.c (tui_show_registers): Likewise.
820 (tui_show_register_group): Likewise.
821 (tui_display_registers_from): Likewise.
822 (tui_check_register_values): Likewise.
823 * tui/tui-source.c (tui_set_source_content): Likewise.
824 (tui_set_source_content_nil): Likewise.
825 (tui_source_is_displayed): Likewise.
826 * tui/tui-stack.c (tui_show_locator_content): Likewise.
827 (tui_set_locator_fullname): Likewise.
828 (tui_set_locator_info): Likewise.
829 (tui_show_frame_info): Likewise.
830 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
831 (tui_show_source_line): Likewise.
832 (tui_horizontal_source_scroll): Likewise.
833 (tui_update_breakpoint_info): Likewise.
834 (tui_set_exec_info_content): Likewise.
835 (tui_show_exec_info_content): Likewise.
836 (tui_alloc_source_buffer): Likewise.
837 (tui_line_is_displayed): Likewise.
838 (tui_addr_is_displayed): Likewise.
840 2015-04-27 John Baldwin <jhb@FreeBSD.org>
842 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
843 event if PL_FLAG_EXEC is set.
844 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
845 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
846 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
847 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
848 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
850 2015-04-27 John Baldwin <jhb@FreeBSD.org>
852 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
853 [TDP_RFPPWAIT] New variable fbsd_pending_children.
854 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
855 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
856 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
857 [PT_LWPINFO] (fbsd_wait): New function.
858 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
859 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
860 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
861 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
862 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
863 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
864 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
865 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
866 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
868 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
869 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
870 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
871 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
872 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
873 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
874 Set "to_post_attach" to "fbsd_post_attach".
876 2015-04-27 John Baldwin <jhb@FreeBSD.org>
878 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
879 (fbsd_find_memory_regions): Mark static.
880 (fbsd_nat_add_target): New function.
881 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
882 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
883 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
884 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
885 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
886 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
888 2015-04-27 Gary Benson <gbenson@redhat.com>
890 * objfiles.c (allocate_objfile): Do not attempt to expand name
891 if name is a "target:" filename.
892 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
893 to load auto-load scripts for objfiles with "target:" filenames.
895 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
897 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
898 (enum s390_vector_abi_kind): New enum.
899 (struct gdbarch_tdep)<vector_abi>: New field.
900 (s390_effective_inner_type): Add parameter min_size. Stop
901 unwrapping if the inner type is smaller than min_size.
902 (s390_function_arg_float): Adjust call to
903 s390_effective_inner_type.
904 (s390_function_arg_vector): New function.
905 (s390_function_arg_integer): Adjust comment.
906 (struct s390_arg_state)<vr>: New field.
907 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
908 arguments according to vector ABI when appropriate.
909 (s390_push_dummy_call): Initialize the argument state's field
910 'vr'. Adjust calls to s390_handle_arg.
911 (s390_register_return_value): Handle vector return values.
912 (s390_return_value): Apply the "register" return value convention
913 to a vector when appropriate.
914 (s390_gdbarch_init): Initialize tdep->vector_abi.
915 * NEWS: Announce S390 vector ABI support.
917 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
919 * s390-linux-tdep.c (s390_return_value_convention): Remove
920 function. Inline its logic...
921 (s390_return_value): ...here. Instead, move the handling of the
922 "register" return value convention...
923 (s390_register_return_value): ...here. New function.
925 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
928 (is_float_singleton): Remove function. Move the "singleton" part
930 (s390_effective_inner_type): ...here. New function.
931 (is_float_like): Remove function. Inline its logic...
932 (s390_function_arg_float): ...here.
933 (is_pointer_like, is_integer_like, is_struct_like): Remove
934 functions. Inline their logic...
935 (s390_function_arg_integer): ...here.
936 (s390_function_arg_pass_by_reference): Remove function.
937 (extend_simple_arg): Remove function.
938 (alignment_of): Remove function.
939 (struct s390_arg_state): New structure.
940 (s390_handle_arg): New function.
941 (s390_push_dummy_call): Move parameter placement logic to the new
942 function s390_handle_arg. Call it for calculating the stack area
943 sizes first, and again for actually writing the parameters.
945 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
947 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
948 false if the argument is zero.
950 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
952 * ada-lang.c (template_to_static_fixed_type): Return input type
953 when it is already fixed. Cache the input type itself when not
954 creating a static fixed copy. Make it explicit that we never
955 molestate the input type.
956 * gdbtypes.c (resolve_dynamic_struct): Reset the
957 TYPE_TARGET_TYPE field for resolved copies.
959 2015-04-27 Joel Brobecker <brobecker@adacore.com>
961 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
962 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
963 (template_to_static_fixed_type): Call ada_check_typedef only
966 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
968 * cli/cli-dump.c (srec_dump_command): Add internationalization
970 (ihex_dump_command): Likewise.
971 (tekhex_dump_command): Likewise.
972 (binary_dump_command): Likewise.
973 (binary_append_command): Likewise.
975 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
977 * cli/cli-dump.c (verilog_cmdlist): New variable.
978 (dump_verilog_memory): New function.
979 (dump_verilog_value): New function.
980 (verilog_dump_command): New function.
981 (_initialize_cli_dump): Add new commands to support verilog dump
983 * NEWS: Add entry for "dump verilog".
985 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
987 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
988 descriptive type when there is none.
990 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
992 * tui/tui-win.c (tui_async_resize_screen): Call
993 rl_resize_terminal().
995 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
997 * windows-nat.c (handle_output_debug_string): Don't change
998 current_event.dwThreadId.
999 (get_windows_debug_event): Use thread_id, rather than relying on
1000 current_event.dwThreadId being changed.
1002 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1004 * windows-nat.c (windows_continue): Report an error if
1005 ContinueDebugEvent() fails.
1007 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1009 * windows-nat.c (windows_resume): Fix misspelling in debug output.
1011 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1013 * windows-nat.c (get_windows_debug_event): Replace retval with
1014 thread_id throughout. Update stale comment.
1016 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1018 * windows-nat.c (get_windows_debug_event): Don't use ternary
1019 conditional operator.
1021 2015-04-21 Pierre Muller <muller@sourceware.org>
1024 p-exp.y (yylex): Reorganize code to return the matched pattern
1025 for a field of this.
1027 2015-04-21 Gary Benson <gbenson@redhat.com>
1029 * common/fileio.h (fileio_to_host_openflags): New declaration.
1030 * common/fileio.c (fcntl.h): New include.
1031 (fileio_to_host_openflags): New function, factored out from...
1032 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1035 2015-04-21 Kevin Buettner <kevinb@redhat.com>
1037 * rl78-tdep.c (RL78_SP_ADDR): Define.
1038 (opc_reg_to_gdb_regnum): New static function.
1039 (rl78_analyze_prologue): Recognize instructions forming slightly
1040 more interesting prologues.
1042 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1045 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1046 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1047 TYPE_CODE_REF types so that they are not considered as dynamic
1048 depending on the referenced type.
1049 (resolve_dynamic_type_internal): Likewise.
1051 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1054 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1055 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1056 "top_level" parameter.
1057 (resolve_dynamic_type_internal): Remove the unused "top_level"
1058 parameter. Update call to is_dynamic_type_internal.
1059 (is_dynamic_type): Update call to is_dynamic_type_internal.
1060 (resolve_dynamic_range): Update call to
1061 resolve_dynamic_type_internal.
1062 (resolve_dynamic_union): Likewise.
1063 (resolve_dynamic_struct): Likewise.
1064 (resolve_dynamic_type): Likewise.
1066 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
1068 * breakpoint.c (update_dprintf_command_list): Remove duplicated
1071 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
1073 * reply_mig_hack.awk: Robustify parsing.
1075 * reply_mig_hack.awk: Don't bother to declare an intermediate
1076 function pointer variable.
1078 2015-04-17 Doug Evans <dje@google.com>
1080 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1081 to "exec_displacement" to avoid confusion with inner use of the name.
1083 2015-04-17 Pedro Alves <palves@redhat.com>
1085 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1086 if HW point of TYPE isn't supported.
1088 2015-04-17 Yao Qi <yao.qi@linaro.org>
1089 Pedro Alves <palves@redhat.com>
1091 * target.h (target_can_use_hardware_watchpoint): Update comments.
1092 Remove trailing ";".
1094 2015-04-17 Gary Benson <gbenson@redhat.com>
1096 * remote.c (remote_add_inferior): New argument try_open_exec.
1097 If nonzero, attempt to open the inferior's executable file as
1098 the main executable if no main executable is open already.
1099 All callers updated.
1100 * NEWS: Mention that GDB now supports automatic location and
1101 retrieval of executable + files from remote targets.
1103 2015-04-17 Gary Benson <gbenson@redhat.com>
1105 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1106 * remote.c (PACKET_qXfer_exec_file): Likewise.
1107 (remote_protocol_features): Register the
1108 "qXfer:exec-file:read" feature.
1109 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1110 (remote_pid_to_exec_file): New function.
1111 (init_remote_ops): Initialize to_pid_to_exec_file.
1112 (_initialize_remote): Register new "set/show remote
1113 pid-to-exec-file-packet" command.
1114 * NEWS: Announce new qXfer:exec-file:read packet.
1116 2015-04-17 Gary Benson <gbenson@redhat.com>
1118 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
1120 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
1121 New function, factored out from...
1122 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
1124 2015-04-17 Gary Benson <gbenson@redhat.com>
1126 * exec.c (solist.h): New include.
1127 (exec_file_locate_attach): Prefix absolute executable
1128 paths with gdb_sysroot if set.
1129 * NEWS: Mention that executable paths may be prepended
1132 2015-04-17 Gary Benson <gbenson@redhat.com>
1134 * solist.h (exec_file_find): New declaration.
1135 * solib.c (solib_find_1): New function, factored out from...
1136 (solib_find): ...here.
1137 (exec_file_find): New function.
1139 2015-04-17 Gary Benson <gbenson@redhat.com>
1141 * gdbcore.h (exec_file_locate_attach): New declaration.
1142 * exec.c (exec_file_locate_attach): New function, factored
1144 * infcmd.c (attach_command_post_wait): ...here.
1146 2015-04-17 Mike Frysinger <vapier@gentoo.org>
1148 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1150 2015-04-16 Yao Qi <yao.qi@linaro.org>
1152 * infrun.c (maybe_software_singlestep): Declare.
1153 (displaced_step_fixup): Call maybe_software_singlestep.
1155 2015-04-15 Doug Evans <dje@google.com>
1157 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1159 2015-04-15 Doug Evans <dje@google.com>
1161 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1163 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
1165 * python/lib/gdb/command/unwinders.py: Add parentheses.
1167 2015-04-15 Yao Qi <yao.qi@linaro.org>
1169 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1171 2015-04-15 Yao Qi <yao.qi@linaro.org>
1173 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1175 2015-04-15 Yao Qi <yao.qi@linaro.org>
1177 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1178 dsc->insn_size instead of 4.
1180 2015-04-14 Gary Benson <gbenson@redhat.com>
1182 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1183 * minidebug.c (lzma_stat): Likewise.
1184 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1185 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1187 2015-04-13 Stan Shebs <stanshebs@google.com>
1189 * MAINTAINERS: Update my email address.
1191 2015-04-13 John Baldwin <jhb@FreeBSD.org>
1193 * amd64-tdep.c (amd64_target_description): New function.
1194 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1195 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1196 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1197 x86 extended save area.
1198 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1199 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1200 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1201 (_initialize_amd64fbsd_nat): Set "to_read_description" to
1202 "amd64fbsd_read_description".
1203 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1204 (amd64fbsd_supply_xstateregset): New function.
1205 (amd64fbsd_collect_xstateregset): New function.
1206 Add "amd64fbsd_xstateregset".
1207 (amd64fbsd_iterate_over_regset_sections): New function.
1208 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1209 "I386_FBSD_XSAVE_XCR0_OFFSET".
1210 Add "iterate_over_regset_sections" gdbarch method.
1211 Add "core_read_description" gdbarch method.
1212 * i386-tdep.c (i386_target_description): New function.
1213 * i386-tdep.h: Export i386_target_description and tdesc_i386.
1214 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1215 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1216 x86 extended save area.
1217 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1218 * i386bsd-nat.h: Export i386bsd_xsave_len.
1219 * i386fbsd-nat.c (i386fbsd_read_description): New function.
1220 (_initialize_i386fbsd_nat): Set "to_read_description" to
1221 "i386fbsd_read_description".
1222 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1223 (i386fbsd_core_read_description): New function.
1224 (i386fbsd_supply_xstateregset): New function.
1225 (i386fbsd_collect_xstateregset): New function.
1226 Add "i386fbsd_xstateregset".
1227 (i386fbsd_iterate_over_regset_sections): New function.
1228 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1229 "I386_FBSD_XSAVE_XCR0_OFFSET".
1230 Add "iterate_over_regset_sections" gdbarch method.
1231 Add "core_read_description" gdbarch method.
1232 * i386fbsd-tdep.h: New file.
1234 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1236 * NEWS (Changes since GDB 7.9): Add removed -xdb.
1237 * breakpoint.c (command_line_is_silent): Remove xdb_commands
1239 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
1241 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
1243 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
1245 * defs.h (xdb_commands): Remove declaration.
1246 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
1247 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
1248 * infcmd.c (run_no_args_command, go_command): Remove.
1249 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
1250 * infrun.c (xdb_handle_command): Remove.
1251 (_initialize_infrun): Remove xdb_commands for lz and z.
1252 * main.c (xdb_commands): Remove variable.
1253 (captured_main): Remove "xdb" from long_options.
1254 (print_gdb_help): Remove --xdb from help.
1255 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
1256 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
1257 * stack.c (backtrace_full_command, args_plus_locals_info)
1258 (current_frame_command): Remove.
1259 (_initialize_stack): Remove xdb_commands for t, T and l.
1260 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
1261 * thread.c (_initialize_thread): Remove xdb_commands condition.
1262 * tui/tui-layout.c (tui_toggle_layout_command)
1263 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
1264 (_initialize_tui_layout): Remove xdb_commands for td and ts.
1265 * tui/tui-regs.c (tui_scroll_regs_forward_command)
1266 (tui_scroll_regs_backward_command): Remove.
1267 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
1268 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
1269 (_initialize_tui_win): Remove xdb_commands for U and w.
1270 * utils.c (pagination_on_command, pagination_off_command): Remove.
1271 (initialize_utils): Remove xdb_commands for am and sm.
1273 2015-04-10 Pedro Alves <palves@redhat.com>
1275 * infrun.c (displaced_step_fixup): Switch to the event ptid
1276 earlier. If the thread stopped for a watchpoint and the
1277 target/arch has non-continuable watchpoints, cancel the displaced
1279 (resume): Don't start a displaced step if in-line step-over info
1282 2015-04-10 Pedro Alves <palves@redhat.com>
1284 * infrun.c (displaced_step_in_progress): New function.
1285 (do_target_resume): Advise target to report all signals if
1288 2015-04-10 Pedro Alves <palves@redhat.com>
1291 * infrun.c (process_event_stop_test): Don't assume a step-resume
1292 is set if tp->stepped_breakpoint is true.
1294 2015-04-10 Yao Qi <yao.qi@linaro.org>
1296 * arm-tdep.c (install_alu_reg): Update comment.
1297 (thumb_copy_alu_reg): Remove local variable rn. Update
1298 debugging message. Use r2 instead of r1 in the modified
1301 2015-04-10 Pedro Alves <palves@redhat.com>
1304 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
1305 linux_displaced_step_location as gdbarch_displaced_step_location
1307 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
1308 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
1309 * linux-tdep.c (linux_displaced_step_location): New function,
1310 based on ppc_linux_displaced_step_location.
1311 * linux-tdep.h (linux_displaced_step_location): New declaration.
1312 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
1313 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
1315 (ppc_linux_init_abi): Install linux_displaced_step_location as
1316 gdbarch_displaced_step_location hook, even without Cell/B.E..
1317 (_initialize_ppc_linux_tdep): Don't install
1318 ppc_linux_inferior_created as inferior_created observer.
1319 * s390-linux-tdep.c (s390_gdbarch_init): Install
1320 linux_displaced_step_location as gdbarch_displaced_step_location
1323 2015-04-09 Gary Benson <gbenson@redhat.com>
1325 * common/common-remote-fileio.h: Rename to...
1326 * common/fileio.h: ...this. Update all references.
1327 (remote_fileio_to_fio_error): Rename to...
1328 (host_to_fileio_error): ...this.
1329 (remote_fileio_to_be): Rename to...
1330 (host_to_bigendian): ...this. Update all callers.
1331 (remote_fileio_to_fio_uint): Rename to...
1332 (host_to_fileio_uint): ...this. Update all callers.
1333 (remote_fileio_to_fio_time): Rename to...
1334 (host_to_fileio_time): ...this. Update all callers.
1335 (remote_fileio_to_fio_stat): Rename to...
1336 (host_to_fileio_stat): ...this.
1337 Update all references.
1338 * common/common-remote-fileio.c: Rename to...
1339 * common/fileio.c: ...this. Update all references.
1340 (remote_fileio_to_fio_error): Rename to...
1341 (host_to_fileio_error): ...this. Update all callers.
1342 (remote_fileio_mode_to_target): Rename to...
1343 (fileio_mode_pack): ...this. Update all callers.
1344 (remote_fileio_to_fio_mode): Rename to...
1345 (host_to_fileio_mode): ...this. Update all callers.
1346 (remote_fileio_to_fio_ulong): Rename to...
1347 (host_to_fileio_ulong): ...this. Update all callers.
1348 (remote_fileio_to_fio_stat): Rename to...
1349 (host_to_fileio_stat): ...this. Update all callers.
1351 2015-04-09 Andy Wingo <wingo@igalia.com>
1353 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
1354 (frame_functions): Bind gdbscm_frame_read_register to
1355 frame-read-register.
1356 * guile/lib/gdb.scm (frame-read-register): Export.
1358 2015-04-09 Gary Benson <gbenson@redhat.com>
1360 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
1362 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
1363 New function, factored out the named functions below.
1364 * inf-child.c (gdb/fileio.h): Remove include.
1365 (common-remote-fileio.h): New include.
1366 (inf_child_errno_to_fileio_error): Remove function. Update
1367 all callers to use remote_fileio_to_fio_error.
1368 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
1370 2015-04-09 Andy Wingo <wingo@igalia.com>
1372 * MAINTAINERS (Write After Approval): Add Andy Wingo.
1374 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
1376 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
1377 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
1378 * configure: Regenerated.
1380 2015-04-09 Pedro Alves <palves@redhat.com>
1382 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
1383 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
1384 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
1385 * gnulib/import/Makefile.am: Update.
1386 * gnulib/import/Makefile.in: Update.
1387 * gnulib/import/m4/gnulib-cache.m4: Update.
1388 * gnulib/import/m4/gnulib-comp.m4: Update.
1389 * gnulib/import/m4/strtok_r.m4: New file.
1390 * gnulib/import/strtok_r.c: New file.
1392 2015-04-09 Pedro Alves <palves@redhat.com>
1394 * gnulib/update-gnulib.sh (aclocal version check): Filter out
1395 "called too early to check prototype".
1397 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
1400 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
1401 use a caching mechanism. Adjust comments and code to reflect
1402 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
1403 (cmdpy_completer_handle_brkchars): Adjust call to
1404 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
1405 (cmdpy_completer): Likewise.
1407 2015-04-08 Yao Qi <yao.qi@linaro.org>
1409 * spu-tdep.c (spu_gdbarch_init): Don't call
1410 set_gdbarch_cannot_step_breakpoint.
1412 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
1414 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
1416 2015-04-07 Pedro Alves <palves@redhat.com>
1418 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
1419 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
1420 (delete_exited_threads): New declaration.
1421 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
1422 * linux-nat.c (linux_nat_update_thread_list): New function.
1423 (linux_nat_add_target): Install it.
1424 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
1425 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
1426 (delete_exited_threads): New function.
1428 2015-04-07 Pedro Alves <pedro@codesourcery.com>
1430 * infrun.c (resume) <displaced stepping debug output>: Get the
1431 leader thread's regcache, not resume_ptid's.
1433 2015-04-06 Doug Evans <xdje42@gmail.com>
1435 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
1437 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
1438 Include symbol domain in debugging output.
1440 2015-04-06 Pedro Alves <palves@redhat.com>
1441 Bernd Edlinger <bernd.edlinger@hotmail.de>
1443 * configure.ac: Remove the mingw32-specific stub-termcap.o
1444 fallback, and instead fallback to the stub termcap on all hosts.
1445 * configure: Regenerate.
1446 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
1449 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1451 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1452 "top_level" parameter.
1453 (resolve_dynamic_type_internal): Remove the unused "top_level"
1454 parameter. Update call to is_dynamic_type_internal.
1455 (is_dynamic_type): Update call to is_dynamic_type_internal.
1456 (resolve_dynamic_range): Update call to
1457 resolve_dynamic_type_internal.
1458 (resolve_dynamic_union): Likewise.
1459 (resolve_dynamic_struct): Likewise.
1460 (resolve_dynamic_type): Likewise.
1462 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1464 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1465 TYPE_CODE_REF types so that they are not considered as dynamic
1466 depending on the referenced type.
1467 (resolve_dynamic_type_internal): Likewise.
1469 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
1471 * Makefile.in (top_srcdir): New.
1472 * configure: Regenerated.
1474 2015-04-02 Gary Benson <gbenson@redhat.com>
1476 * NEWS: Announce the new default sysroot of "target:".
1478 2015-04-02 Gary Benson <gbenson@redhat.com>
1480 * main.c (captured_main): Set gdb_sysroot to "target:"
1481 if not otherwise set.
1483 2015-04-02 Gary Benson <gbenson@redhat.com>
1485 * exec.c (exec_file_attach): Support "target:" filenames.
1487 2015-04-02 Gary Benson <gbenson@redhat.com>
1489 * solib.c (solib_find): Strip "target:" prefix from sysroot
1490 if accessing local files.
1492 2015-04-02 Gary Benson <gbenson@redhat.com>
1494 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
1495 checks and error messages.
1497 2015-04-02 Gary Benson <gbenson@redhat.com>
1499 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
1500 (remote_filename_p): Remove declaration.
1501 (remote_bfd_open): Likewise.
1502 * remote.c (remote_bfd_iovec_open): Remove function.
1503 (remote_bfd_iovec_close): Likewise.
1504 (remote_bfd_iovec_pread): Likewise.
1505 (remote_bfd_iovec_stat): Likewise.
1506 (remote_filename_p): Likewise.
1507 (remote_bfd_open): Likewise.
1508 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
1509 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
1510 (gdb_bfd_open_maybe_remote): Remove function.
1511 (symfile_bfd_open): Replace remote filename check with
1512 target filename check.
1513 (reread_symbols): Use gdb_bfd_open.
1514 * build-id.c (gdbcore.h): New include.
1515 (build_id_to_debug_bfd): Use gdb_bfd_open.
1516 * infcmd.c (attach_command_post_wait): Remove remote filename
1518 * solib.c (solib_find): Replace remote-specific handling with
1519 target-specific handling. Update comments where necessary.
1520 (solib_bfd_open): Replace remote-specific handling with
1521 target-specific handling.
1522 (gdb_sysroot_changed): New function.
1523 (_initialize_solib): Call the above when gdb_sysroot changes.
1524 * windows-tdep.c (gdbcore.h): New include.
1525 (windows_xfer_shared_library): Use gdb_bfd_open.
1527 2015-04-02 Gary Benson <gbenson@redhat.com>
1529 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
1530 (is_target_filename): New declaration.
1531 (gdb_bfd_has_target_filename): Likewise.
1532 (gdb_bfd_open): Update documentation comment.
1533 * gdb_bfd.c (target.h): New include.
1534 (gdb/fileio.h): Likewise.
1535 (is_target_filename): New function.
1536 (gdb_bfd_has_target_filename): Likewise.
1537 (fileio_errno_to_host): Likewise.
1538 (gdb_bfd_iovec_fileio_open): Likewise.
1539 (gdb_bfd_iovec_fileio_pread): Likewise.
1540 (gdb_bfd_iovec_fileio_close): Likewise.
1541 (gdb_bfd_iovec_fileio_fstat): Likewise.
1542 (gdb_bfd_open): Use target fileio to access paths prefixed
1543 with "target:" where necessary.
1545 2015-04-02 Gary Benson <gbenson@redhat.com>
1547 * target.h (struct target_ops) <to_filesystem_is_local>:
1549 (target_filesystem_is_local): New macro.
1550 * target-delegates.c: Regenerate.
1551 * remote.c (remote_filesystem_is_local): New function.
1552 (init_remote_ops): Initialize to_filesystem_is_local.
1554 2015-04-02 Gary Benson <gbenson@redhat.com>
1556 * target.h (struct target_ops) <to_fileio_fstat>: New field.
1557 (target_fileio_fstat): New declaration.
1558 * target.c (target_fileio_fstat): New function.
1559 * inf-child.c (inf_child_fileio_fstat): Likewise.
1560 (inf_child_target): Initialize to_fileio_fstat.
1561 * remote.c (init_remote_ops): Likewise.
1563 2015-04-01 Sasha Smundak <asmundak@google.com>
1565 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
1566 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
1567 (py-unwind.o): New recipe.
1568 * NEWS: mention Python frame unwinding.
1569 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
1570 gdb/unwinder.py and gdb/command/unwinder.py
1571 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
1573 (execute_unwinders): New function.
1574 * python/lib/gdb/command/unwinders.py: New file.
1575 * python/lib/gdb/unwinder.py: New file.
1576 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
1577 (objfpy_dealloc): Decrement frame_unwinders reference count.
1578 (objfpy_initialize): Create frame_unwinders list.
1579 (objfpy_get_frame_unwinders): New function.
1580 (objfpy_set_frame_unwinders): Ditto.
1581 (objfile_getset): Add frame_unwinders attribute to Objfile.
1582 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
1583 (pspy_dealloc): Decrement frame_unwinders reference count.
1584 (pspy_initialize): Create frame_unwinders list.
1585 (pspy_get_frame_unwinders): New function.
1586 (pspy_set_frame_unwinders): Ditto.
1587 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
1588 * python/py-unwind.c: New file.
1589 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
1590 (objpy_get_frame_unwinders): New prototype.
1591 (gdbpy_initialize_unwind): New prototype.
1592 * python/python.c (gdbpy_apply_type_printers): Call
1593 gdbpy_initialize_unwind.
1595 2015-04-01 Pedro Alves <palves@redhat.com>
1597 * infrun.c (resume): Check currently_stepping after clearing
1598 stepped_breakpoint, not before.
1600 2015-04-01 Pedro Alves <palves@redhat.com>
1602 * infrun.c (print_target_wait_results): Print all the ptid
1605 2015-04-01 Pedro Alves <palves@redhat.com>
1607 * infrun.c (keep_going): Also discard cleanups if inserting
1610 2015-04-01 Pedro Alves <palves@redhat.com>
1612 * infrun.c (wait_for_inferior): Install the
1613 finish_thread_state_cleanup cleanup across the whole function, not
1614 just around handle_inferior_event.
1616 2015-04-01 Pedro Alves <palves@redhat.com>
1618 * infrun.c (resume) <step past permanent breakpoint>: Use
1621 2015-04-01 Pedro Alves <palves@redhat.com>
1623 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
1625 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
1627 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
1629 2015-04-01 Pedro Alves <palves@redhat.com>
1631 * linux-thread-db.c (record_thread): Readd the thread to gdb's
1632 list if it was marked exited.
1634 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
1636 * configure: Regenerated.
1638 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
1639 Jan Kratochvil <jan.kratochvil@redhat.com>
1640 Oleg Nesterov <oleg@redhat.com>
1643 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
1644 New enum identifying the various options of the coredump_filter
1646 (struct smaps_vmflags): New struct.
1647 (use_coredump_filter): New variable.
1648 (decode_vmflags): New function.
1649 (mapping_is_anonymous_p): Likewise.
1650 (dump_mapping_p): Likewise.
1651 (linux_find_memory_regions_full): New variables
1652 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
1653 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
1654 parsing of its information. Implement memory mapping filtering
1655 based on its contents.
1656 (show_use_coredump_filter): New function.
1657 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
1658 * NEWS: Mention the possibility of using the
1659 '/proc/PID/coredump_filter' file when generating a corefile.
1660 Mention new command 'set use-coredump-filter'.
1662 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
1664 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
1665 read_memory_unsigned_integer.
1667 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
1669 * Makefile.in (ZLIB): New.
1670 (ZLIBINC): Likewise.
1671 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
1672 (CLIBS): Add $(ZLIB).
1673 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
1675 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
1676 * top.c (print_gdb_configuration): Remove --with-zlib and
1678 * config.in: Regenerated.
1679 * configure: Likewise.
1681 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
1683 * NEWS: Mention info os cpus support.
1684 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
1685 (struct osdata_type): Add cpus entry, reorder the entries in
1688 2015-03-31 Matthias Klose <doko@ubuntu.com>
1690 * compile/compile.c (compile_to_object): Allow triplets with or
1693 2015-03-30 Doug Evans <dje@google.com>
1696 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
1697 klass in VAR_DOMAIN.
1699 2015-03-30 Gary Benson <gbenson@redhat.com>
1701 * remote.c (remote_mourn_1): Remove function. Update all callers
1702 to use remote_mourn.
1703 (extended_remote_mourn_1): Remove function. Update all callers
1704 to use extended_remote_mourn.
1705 (extended_remote_attach_1): Remove function. Update all callers
1706 to use extended_remote_attach.
1708 2015-03-28 James Bowman <james.bowman@ftdichip.com>
1710 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
1711 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
1712 (ALLDEPFILES): Add ft32-tdep.c.
1713 * configure.tgt: Add FT32 entry.
1714 * ft32-tdep.c: New file, FT32 target-dependent code.
1715 * ft32-tdep.h: New file, FT32 target-dependent code.
1717 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1720 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1722 * printcmd.c (print_command_1): Move expr variable scope.
1724 2015-03-27 Joel Brobecker <brobecker@adacore.com>
1726 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
1728 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
1730 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
1733 2015-03-26 Joel Brobecker <brobecker@adacore.com>
1735 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
1736 exception raised while parsing the probe arguments.
1737 Force parsing to be done using the C language parser.
1738 * expression.h (parse_expression_with_language): Declare.
1739 * parse.c (parse_expression_with_language): New function.
1741 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
1743 * MAINTAINERS (Write After Approval): Add "Jon Turney".
1745 2015-03-26 Andy Wingo <wingo@igalia.com>
1748 * dwarf2read.c (struct partial_die_info): Add has_const_value
1750 (add_partial_symbol): Don't punt on symbols that have const_value
1752 (read_partial_die): Detect DW_AT_const_value.
1754 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1757 * printcmd.c (print_command_1): Move expr variable scope.
1759 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1762 * printcmd.c (validate_format): Make the parameter cmdname const.
1764 2015-03-26 Don Breazeal <donb@codesourcery.com>
1766 * remote.c (_initialize_remote): Update comment.
1768 2015-03-26 Pedro Alves <palves@redhat.com>
1769 Jon TURNEY <jon.turney@dronecode.org.uk>
1771 * coffread.c (coff_symfile_read): When constructing the name of an
1772 import stub symbol from import symbol for amd64, only skip the
1773 char after _imp_ if the target is underscored (like i386) and the
1774 char is indeed the target's leading char.
1776 2015-03-25 Pedro Alves <palves@redhat.com>
1778 * target.h <to_async>: Replace 'callback' and 'context' parameters
1779 with boolean 'enable' parameter.
1780 (target_async): Replace CALLBACK and CONTEXT parameters with
1781 boolean ENABLE parameter.
1782 * inf-loop.c (inferior_event_handler): Adjust.
1783 * linux-nat.c (linux_nat_attach, linux_nat_resume)
1784 (linux_nat_resume): Adjust.
1785 (async_client_callback, async_client_context): Delete.
1786 (handle_target_event): Call inferior_event_handler directly.
1787 (linux_nat_async): Replace 'callback' and 'context' parameters
1788 with boolean 'enable' parameter. Adjust. Remove references to
1789 async_client_callback and async_client_context.
1790 (linux_nat_close): Adjust.
1791 * record-btrace.c (record_btrace_async): Replace 'callback' and
1792 'context' parameters with boolean 'enable' parameter. Adjust.
1793 (record_btrace_resume): Adjust.
1794 * record-full.c (record_full_async): Replace 'callback' and
1795 'context' parameters with boolean 'enable' parameter. Adjust.
1796 (record_full_resume, record_full_core_resume): Adjust.
1797 * remote.c (struct remote_state) <async_client_callback,
1798 async_client_context>: Delete fields.
1799 (remote_start_remote, extended_remote_attach_1, remote_resume)
1800 (extended_remote_create_inferior): Adjust.
1801 (remote_async_serial_handler): Call inferior_event_handler
1803 (remote_async): Replace 'callback' and 'context' parameters with
1804 boolean 'enable' parameter. Adjust.
1805 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
1807 * target-delegates.c: Regenerate.
1809 2015-03-25 Gary Benson <gbenson@redhat.com>
1810 Pedro Alves <palves@redhat.com>
1812 * target.c (fileio_ft_t): New typedef, define object vector.
1813 (fileio_fhandles): New static variable.
1814 (is_closed_fileio_fh): New macro.
1815 (lowest_closed_fd): New static variable.
1816 (acquire_fileio_fd): New function.
1817 (release_fileio_fd): Likewise.
1818 (fileio_fd_to_fh): New macro.
1819 (target_fileio_open): Wrap the file descriptor on success.
1820 (target_fileio_pwrite): Updated to use wrapped file descriptor.
1821 (target_fileio_pread): Likewise.
1822 (target_fileio_close): Likewise.
1824 2015-03-24 Pedro Alves <palves@redhat.com>
1826 * thread.c (thread_apply_all_command): Take exited threads into
1829 2015-03-24 Pedro Alves <palves@redhat.com>
1831 * infrun.c (resume, proceed): Mention
1832 switch_back_to_stepped_thread, not switch_back_to_stepping.
1834 2015-03-24 Pedro Alves <palves@redhat.com>
1836 * infrun.c (user_visible_resume_ptid): Rewrite going from
1837 most-locked to unlocked instead of the opposite. Move comment ...
1838 * infrun.h (user_visible_resume_ptid): ... here.
1840 2015-03-24 Pedro Alves <palves@redhat.com>
1842 * linux-nat.c (linux_nat_resume): Output debug logs before trying
1843 to resume the event lwp. Use the lwp's ptid instead of the passed
1844 in (maybe wildcard) ptid.
1845 (stop_wait_callback): Tweak debug log output.
1846 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
1848 (linux_nat_filter_event): In debug output, distinguish a
1849 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
1850 before trying to resume the lwp.
1852 2015-03-24 Joel Brobecker <brobecker@adacore.com>
1854 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
1855 pointer indirection.
1856 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
1857 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
1859 2015-03-24 Joel Brobecker <brobecker@adacore.com>
1861 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
1862 Renames DYN_ATTR_DATA_LOCATION.
1863 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
1864 DYN_ATTR_DATA_LOCATION.
1865 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
1866 instead of DYN_ATTR_DATA_LOCATION.
1868 2015-03-24 Pedro Alves <palves@redhat.com>
1870 * breakpoint.c (until_break_command): Adjust call to proceed.
1871 * gdbthread.h (struct thread_control_state) <stepping_command>:
1873 * infcall.c (run_inferior_call): Adjust call to proceed.
1874 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
1875 Adjust calls to proceed.
1876 (set_step_frame): Set the current thread's step_start_function
1878 (step_once): Adjust calls to proceed.
1879 (jump_command, signal_command, until_next_command)
1880 (finish_backward, finish_forward, proceed_after_attach_callback)
1881 (attach_command_post_wait): Adjust calls to proceed.
1882 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
1883 (do_target_resume): New function, factored out from ...
1884 (resume): ... here. Remove 'step' parameter. Instead, check
1885 currently_stepping to determine whether the thread should be
1887 (proceed): Remove 'step' parameter and don't set the thread's
1888 step_start_function here. Adjust call to 'resume'.
1889 (handle_inferior_event): Adjust calls to 'resume'.
1890 (switch_back_to_stepped_thread): Use do_target_resume instead of
1892 (keep_going): Adjust calls to 'resume'.
1893 * infrun.h (proceed): Remove 'step' parameter.
1895 * windows-nat.c (do_initial_windows_stuff): Adjust call to
1897 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
1899 2015-03-24 Pedro Alves <palves@redhat.com>
1901 * gdbthread.h (struct thread_control_state) <stepping_command>:
1903 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
1904 the thread's stepping_command field.
1905 * infrun.c (resume): Check the thread's stepping_command flag to
1906 determine which threads should be resumed. Rename 'entry_step'
1908 (clear_proceed_status_thread): Clear 'stepping_command'.
1909 (schedlock_applies): Change parameter type to struct thread_info
1911 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
1912 (switch_back_to_stepped_thread): Adjust calls to
1913 'schedlock_applies'.
1914 (_initialize_infrun): Adjust "set scheduler-locking step" help.
1916 2015-03-24 Pedro Alves <palves@redhat.com>
1918 * infrun.c (step_start_function): Delete and ...
1919 * gdbthread.h (struct thread_control_state) <step_start_function>:
1920 ... now a field here.
1921 * infrun.c (clear_proceed_status_thread): Clear the thread's
1922 step_start_function.
1923 (proceed, process_event_stop_test, print_stop_event): Adjust.
1925 2015-03-24 Pedro Alves <palves@redhat.com>
1927 * infrun.c (proceed): No longer handle negative step.
1929 2015-03-24 Gary Benson <gbenson@redhat.com>
1931 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
1932 (x86_linux_prepare_to_resume): Likewise.
1933 * x86-linux-nat.c (x86_linux_new_thread):
1934 Moved to nat/x86-linux.c.
1935 (x86_linux_prepare_to_resume): Likewise.
1936 * nat/x86-linux.c (x86_linux_new_thread): New function.
1937 (x86_linux_prepare_to_resume): Likewise.
1939 2015-03-24 Gary Benson <gbenson@redhat.com>
1941 * nat/x86-linux-dregs.h: New file.
1942 * nat/x86-linux-dregs.c: Likewise.
1943 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
1944 (x86-linux-dregs.o): New rule.
1945 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
1946 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1947 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
1948 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
1949 (x86_linux_dr_get): Likewise.
1950 (x86_linux_dr_set): Likewise.
1951 (x86_linux_dr_get_addr): Likewise.
1952 (x86_linux_dr_get_control): Likewise.
1953 (x86_linux_dr_get_status): Likewise.
1954 (update_debug_registers_callback): Likewise.
1955 (x86_linux_dr_set_control): Likewise.
1956 (x86_linux_dr_set_addr): Likewise.
1957 (x86_linux_update_debug_registers): Likewise.
1959 2015-03-24 Gary Benson <gbenson@redhat.com>
1961 * x86-linux-nat.c (x86_linux_update_debug_registers):
1962 New function, factored out from...
1963 (x86_linux_prepare_to_resume): ...this.
1965 2015-03-24 Gary Benson <gbenson@redhat.com>
1967 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
1968 (x86_linux_dr_set): Likewise.
1969 (x86_linux_dr_get_addr): Likewise.
1970 (x86_linux_dr_get_control): Likewise.
1971 (x86_linux_dr_get_status): Likewise.
1972 (update_debug_registers_callback): Likewise.
1973 (x86_linux_dr_set_control): Likewise.
1974 (x86_linux_dr_set_addr): Likewise.
1975 (x86_linux_prepare_to_resume): Likewise.
1976 (x86_linux_new_thread): Likewise.
1978 2015-03-24 Gary Benson <gbenson@redhat.com>
1980 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
1981 (x86_linux_new_thread): Rename argument.
1983 2015-03-24 Gary Benson <gbenson@redhat.com>
1985 * nat/x86-linux.h: New file.
1986 * nat/x86-linux.c: Likewise.
1987 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
1988 (x86-linux.o): New rule.
1989 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
1990 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1991 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
1992 (lwp_set_arch_private_info): New declaration.
1993 (lwp_arch_private_info): Likewise.
1994 * linux-nat.c (lwp_set_arch_private_info): New function.
1995 (lwp_arch_private_info): Likewise.
1996 * x86-linux-nat.c: Include nat/x86-linux.h.
1997 (arch_lwp_info): Removed structure.
1998 (update_debug_registers_callback):
1999 Use lwp_set_debug_registers_changed.
2000 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2001 and lwp_set_debug_registers_changed.
2002 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2004 2015-03-24 Gary Benson <gbenson@redhat.com>
2006 * nat/linux-nat.h (ptid_of_lwp): New declaration.
2007 (lwp_is_stopped): Likewise.
2008 (lwp_stop_reason): Likewise.
2009 * linux-nat.c (ptid_of_lwp): New function.
2010 (lwp_is_stopped): Likewise.
2011 (lwp_is_stopped_by_watchpoint): Likewise.
2012 * x86-linux-nat.c (update_debug_registers_callback):
2014 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2017 2015-03-24 Gary Benson <gbenson@redhat.com>
2019 * linux-nat.h (linux_stop_lwp): Move declaration to...
2020 * nat/linux-nat.h (linux_stop_lwp): New declaration.
2022 2015-03-24 Gary Benson <gbenson@redhat.com>
2024 * linux-nat.h: Include nat/linux-nat.h.
2025 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2026 * nat/linux-nat.h (struct lwp_info): New forward declaration.
2027 (iterate_over_lwps_ftype): New typedef.
2028 (iterate_over_lwps): New declaration.
2029 * linux-nat.h (iterate_over_lwps): Update comment. Use
2030 iterate_over_lwps_ftype. Update callback return value check.
2032 2015-03-24 Gary Benson <gbenson@redhat.com>
2034 * x86-nat.h (x86_debug_reg_state): Move declaration to...
2035 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2037 2015-03-24 Gary Benson <gbenson@redhat.com>
2039 * nat/linux-nat.h (current_lwp_ptid): New declaration.
2040 * linux-nat.c (current_lwp_ptid): New function.
2041 * x86-linux-nat.c: Include nat/linux-nat.h.
2042 (x86_linux_dr_get_addr): Use current_lwp_ptid.
2043 (x86_linux_dr_get_control): Likewise.
2044 (x86_linux_dr_get_status): Likewise.
2045 (x86_linux_dr_set_control): Likewise.
2046 (x86_linux_dr_set_addr): Likewise.
2048 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
2050 PR breakpoints/16466
2051 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2053 2015-03-23 Joel Brobecker <brobecker@adacore.com>
2055 * ser-mingw.c (ser_windows_setparity): Fix indentation.
2056 * ser-unix.c (hardwire_setparity): Likewise.
2058 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2060 * NEWS: Mention set/show serial parity command.
2061 * monitor.c (monitor_open): Call serial_setparity.
2062 * remote.c (remote_open_1): Likewise.
2063 * ser-base.c (ser_base_serparity): New function.
2064 * ser-base.h (ser_base_setparity): Add declaration.
2065 * ser-go32.c (dos_ops): Set "setparity" field.
2066 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2068 (ser_windows_setparity): New function.
2069 (hardwire_ops): Add ser_windows_setparity.
2070 (tty_ops): Add NULL for setparity field.
2071 (pipe_ops): Add ser_base_setparity.
2072 (tcp_ops): Likewise.
2073 * ser-pipe.c (pipe_ops): Likewise.
2074 * ser-tcp.c (tcp_ops): Likewise.
2075 * ser-unix.c (hardwire_setparity): Add declaration.
2076 (hardwire_raw): Don't reset PARENB flag.
2077 (hardwire_setparity): New function.
2078 (hardwire_ops): Add hardwire_setparity.
2079 * serial.c (serial_setparity): New function.
2080 (serial_parity): New global.
2081 (parity_none, parity_odd, parity_even, parity_enums, parity):
2083 (set_parity): New function.
2084 (_initialize_serial): Add set/show serial parity commands.
2085 * serial.h (GDBPARITY_NONE): Define.
2086 (GDBPARITY_ODD): Define.
2087 (GDBPARITY_EVEN): Define.
2088 (serial_setparity) Add declaration.
2089 (struct serial_ops): Add setparity field.
2090 * target.h (serial_parity): Add declaration.
2092 2015-03-23 Keith Seitz <keiths@redhat.com>
2094 * linespec.c (linespec_lexer_lex_keyword): Update comment.
2096 2015-03-23 Keith Seitz <keiths@redhat.com>
2098 * breakpoint.c (parse_breakpoint_sals): Use
2099 linespec_lexer_lex_keyword to ascertain if the user specified
2101 * linespec.c [IF_KEYWORD_INDEX]: Define.
2102 (linespec_lexer_lex_keyword): Export.
2103 (struct ls_parser) <keyword_ok>: Remove.
2104 A keyword is only a keyword if not followed by another keyword.
2105 (linespec_lexer_lex_one): Remove keyword_ok handling.
2106 Add comment explaining why the parsing stream is not advanced
2107 when a keyword is seen.
2108 (parse_linespec): Remove parser->keyword_ok.
2109 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2111 2015-03-23 Keith Seitz <keiths@redhat.com>
2114 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
2115 if we find a static method with DW_AT_vtable_elem_location.
2117 2015-03-21 Eli Zaretskii <eliz@gnu.org>
2119 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
2120 before the second loop, to avoid undefined behavior. Reported by
2121 Anton Blanchard <anton@samba.org>.
2123 2015-03-20 Keven Boell <keven.boell@intel.com>
2125 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
2126 data_location usage to linked list.
2127 (resolve_dynamic_type_internal): Adapt data_location to
2129 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
2130 (copy_type_recursive, copy_type): Add copy of linked list.
2131 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
2132 (struct dynamic_prop_list): New struct.
2133 * dwarf2read.c (set_die_type): Set data_location data.
2135 2015-03-20 Pedro Alves <palves@redhat.com>
2137 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
2138 inner block and make it const.
2139 * machoread.c (get_archive_prefix_len): Make "lparen" const.
2141 2015-03-20 Pedro Alves <palves@redhat.com>
2143 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2144 * breakpoint.h (set_breakpoint_condition): Update declaration.
2146 2015-03-20 Pedro Alves <palves@redhat.com>
2148 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2150 2015-03-20 Pedro Alves <palves@redhat.com>
2152 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2154 2015-03-20 Pedro Alves <palves@redhat.com>
2156 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2158 2015-03-20 Pedro Alves <palves@redhat.com>
2160 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2161 (nto_init_solib_absolute_prefix): Likewise.
2163 2015-03-20 Pedro Alves <palves@redhat.com>
2165 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2166 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2168 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2170 * config/djgpp/README: Remove gdb.hp.
2172 2015-03-20 Yao Qi <yao.qi@linaro.org>
2174 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2175 set_gdbarch_cannot_step_breakpoint.
2177 2015-03-19 Pedro Alves <palves@redhat.com>
2179 * linux-nat.c (linux_resume_one_lwp): Rename to ...
2180 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
2181 instead call perror_with_name.
2182 (check_ptrace_stopped_lwp_gone): New function.
2183 (linux_resume_one_lwp): Reimplement as wrapper around
2184 linux_resume_one_lwp_throw that swallows errors if the LWP is
2186 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2187 swallows errors if the LWP is gone. Use
2188 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2190 2015-03-19 Pedro Alves <palves@redhat.com>
2192 * linux-nat.c (status_callback): Return early if the LWP has no
2195 2015-03-19 Pedro Alves <palves@redhat.com>
2197 * linux-nat.c (select_event_lwp_callback): Update comment to no
2198 longer mention SIGTRAP.
2200 2015-03-18 Tristan Gingold <gingold@adacore.com>
2202 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2203 redirection code to ...
2204 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
2205 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
2207 2015-03-18 Gary Benson <gbenson@redhat.com>
2209 (remote_protocol_features): Remove the "vFile:fstat" feature.
2210 (remote_hostio_fstat): Probe for "vFile:fstat" support.
2212 2015-03-11 Yao Qi <yao.qi@linaro.org>
2215 * aarch64-linux-tdep.c: Include xml-syscall.h
2216 (aarch64_linux_get_syscall_number): New function.
2217 (aarch64_linux_init_abi): Call
2218 set_gdbarch_get_syscall_number.
2219 * syscalls/aarch64-linux.xml: New file.
2221 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2223 * ser-base.h (ser_base_setstopbits): Change second argument name
2224 from "rate" to "num".
2226 2015-03-17 Gary Benson <gbenson@redhat.com>
2227 Luke Allardyce <lukeallardyce@gmail.com>
2230 * common/common-remote-fileio.h (sys/stat.h): New include.
2231 (stuct stat): Remove forward declaration.
2233 2015-03-16 John Baldwin <jhb@FreeBSD.org>
2235 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
2236 before writing core register notes.
2238 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2239 Pedro Alves <palves@redhat.com>
2241 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
2242 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
2243 (tgoto): Wrap with extern "C".
2245 2015-03-16 Pedro Alves <palves@redhat.com>
2246 Yuanhui Zhang <asmwarrior@gmail.com>
2248 * stub-termcap.c (tputs): Change prototype.
2250 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2251 Pedro Alves <palves@redhat.com>
2253 * windows-nat.c (struct thread_info_struct): Rename to ...
2254 (struct windows_thread_info_struct): ... this.
2255 (thread_info): Rename to ...
2256 (windows_thread_info): ... this.
2259 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2260 Pedro Alves <palves@redhat.com>
2262 * NEWS: New Removed targets and native configurations.
2264 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2267 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
2268 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
2269 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
2270 ia64-hpux-tdep.h, solib-ia64-hpux.h.
2271 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
2272 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
2273 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
2275 * config/ia64/hpux.mh: Remove file.
2276 * config/pa/hpux.mh: Remove file.
2277 * configure: Rebuilt.
2278 * configure.ac (dlgetmodinfo, somread.o): Remove.
2279 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
2280 (ia64-*-hpux*): Remove its float format exception.
2281 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
2282 * hppa-hpux-nat.c: Remove file.
2283 * hppa-hpux-tdep.c: Remove file.
2284 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
2285 Move them here from hppa-tdep.h
2286 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
2287 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
2288 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
2289 Move them to hppa-tdep.c.
2290 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
2292 * ia64-hpux-nat.c: Remove file.
2293 * ia64-hpux-tdep.c: Remove file.
2294 * ia64-hpux-tdep.h: Remove file.
2295 * inf-ttrace.c: Remove file.
2296 * inf-ttrace.h: Remove file.
2297 * solib-ia64-hpux.c: Remove file.
2298 * solib-ia64-hpux.h: Remove file.
2299 * solib-pa64.c: Remove file.
2300 * solib-pa64.h: Remove file.
2301 * solib-som.c: Remove file.
2302 * solib-som.h: Remove file.
2303 * somread.c: Remove file.
2305 2015-03-13 John Baldwin <jhb@FreeBSD.org>
2307 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
2308 * config.in: Regenerate.
2309 * configure: Regenerate.
2310 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
2312 (fbsd_find_memory_regions): Use kinfo_getvmmap to
2313 enumerate memory regions if present.
2315 2015-03-13 John Baldwin <jhb@FreeBSD.org>
2317 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
2318 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
2320 (i386fbsd_sigtramp_p): Likewise.
2322 2015-03-12 John Baldwin <jhb@FreeBSD.org>
2324 * MAINTAINERS (Write After Approval): Add John Baldwin.
2326 2015-03-12 Gary Benson <gbenson@redhat.com>
2328 * solib.c (_initialize_solib): Make "set/show sysroot" use
2329 add_setshow_optional_filename_cmd so it can be restored to
2330 empty after being set.
2332 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
2334 * Makefile.in (SFILES): New source break-catch-syscall.c.
2335 (COMMON_OBS): New object break-catch-syscall.o.
2336 * break-catch-syscall.c: New file.
2337 * breakpoint.c: Remove inclusion of "xml-syscall.h".
2338 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
2339 (struct syscall_catchpoint): Likewise.
2340 (dtor_catch_syscall): Likewise.
2341 (catch_syscall_inferior_data): Likewise.
2342 (struct catch_syscall_inferior_data): Likewise.
2343 (get_catch_syscall_inferior_data): Likewise.
2344 (catch_syscall_inferior_data_cleanup): Likewise.
2345 (insert_catch_syscall): Likewise.
2346 (remove_catch_syscall): Likewise.
2347 (breakpoint_hit_catch_syscall): Likewise.
2348 (print_it_catch_syscall): Likewise.
2349 (print_one_catch_syscall): Likewise.
2350 (print_mention_catch_syscall): Likewise.
2351 (print_recreate_catch_syscall): Likewise.
2352 (catch_syscall_breakpoint_ops): Likewise.
2353 (syscall_catchpoint_p): Likewise.
2354 (create_syscall_event_catchpoint): Likewise.
2355 (catch_syscall_split_args): Likewise.
2356 (catch_syscall_command_1): Likewise.
2357 (is_syscall_catchpoint_enabled): Likewise.
2358 (catch_syscall_enabled): Likewise.
2359 (catching_syscall_number): Likewise.
2360 (catch_syscall_completer): Likewise.
2361 (clear_syscall_counts): Likewise.
2362 (initialize_breakpoint_ops): Move initialization of syscall
2363 catchpoints to break-catch-syscall.c.
2364 (_initialize_breakpoint): Move code related to syscall catchpoints
2365 to break-catch-syscall.c.
2367 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
2369 * breakpoint.c (breakpoint_find_if): New function.
2370 * breakpoint.h (breakpoint_find_if): New prototype.
2372 2015-03-11 Gary Benson <gbenson@redhat.com>
2374 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
2375 * remote-fileio.c (remote_fileio_to_host_uint): New function.
2376 (remote_fileio_to_host_ulong): Likewise.
2377 (remote_fileio_to_host_mode): Likewise.
2378 (remote_fileio_to_host_time): Likewise.
2379 (remote_fileio_to_host_stat): Likewise.
2380 * remote.c (PACKET_vFile_fstat): New enum value.
2381 (remote_protocol_features): Register the "vFile:fstat" feature.
2382 (remote_hostio_fstat): New function.
2383 (remote_bfd_iovec_stat): Use the above.
2384 (_initialize_remote): Register new "set/show remote
2385 hostio-fstat-packet" command.
2386 * symfile.c (separate_debug_file_exists): Update comment.
2387 * NEWS: Announce new vFile:fstat packet.
2389 2015-03-11 Gary Benson <gbenson@redhat.com>
2391 * common/common-remote-fileio.h: New file.
2392 * common/common-remote-fileio.c: Likewise.
2393 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
2394 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
2395 (COMMON_OBS): Add common-remote-fileio.o.
2396 (common-remote-fileio.o): New rule.
2397 * remote-fileio.h (common-remote-fileio.h): New include.
2398 * remote-fileio.c (gdb/fileio.h): Do not include.
2399 (remote_fileio_to_be): Moved to common-remote-fileio.h.
2400 (remote_fileio_to_fio_uint): Likewise.
2401 (remote_fileio_to_fio_time): Likewise.
2402 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
2403 (remote_fileio_to_fio_mode): Likewise.
2404 (remote_fileio_to_fio_ulong): Likewise.
2405 (remote_fileio_to_fio_stat): Likewise.
2407 2015-03-11 Andy Wingo <wingo@igalia.com>
2409 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
2410 we were checking the cached type, not the cached dynamic type.
2412 2015-03-11 Andy Wingo <wingo@igalia.com>
2414 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
2415 other strings, as these are on the GC'd heap, and will be
2416 collected along with the smob.
2418 2015-03-11 Andy Wingo <wingo@igalia.com>
2420 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
2421 (objfile_functions): Bind gdbscm_objfile_progspace to
2423 * guile/lib/gdb.scm: Add objfile-progspace to exports.
2425 2015-03-11 Andy Wingo <wingo@igalia.com>
2427 * guile/guile.c (_initialize_guile): Disable automatic
2428 finalization, if Guile offers us that possibility.
2429 * guile/guile.c (call_initialize_gdb_module):
2430 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
2431 finalizers in appropriate places.
2432 * configure.ac (AC_TRY_LIBGUILE): Add a check for
2433 scm_set_automatic_finalization_enabled.
2434 * configure: Regenerated.
2436 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
2438 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
2441 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
2443 * s390-linux-nat.c (struct arch_lwp_info): New.
2444 (s390_fix_watch_points): Rename to...
2445 (s390_prepare_to_resume): ...this. Skip the PER info update
2446 unless the watch points have changed.
2447 (s390_refresh_per_info, s390_new_thread): New functions.
2448 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
2449 s390_fix_watch_points.
2450 (s390_remove_watchpoint): Likewise.
2451 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
2452 Register s390_prepare_to_resume.
2454 2015-03-09 Pedro Alves <palves@redhat.com>
2457 2015-03-07 Pedro Alves <palves@redhat.com>
2458 * common/gdb_socket.h: New file.
2459 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
2461 (net_open): Use union gdb_sockaddr_u.
2463 2015-03-07 Pedro Alves <palves@redhat.com>
2465 * configure.ac (build_warnings): Move -Wmissing-prototypes
2466 -Wdeclaration-after-statement -Wmissing-parameter-type
2467 -Wold-style-declaration -Wold-style-definition to the C-specific
2469 * configure: Regenerate.
2471 2015-03-07 Pedro Alves <palves@redhat.com>
2473 * common/gdb_socket.h: New file.
2474 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
2476 (net_open): Use union gdb_sockaddr_u.
2478 2015-03-07 Pedro Alves <palves@redhat.com>
2480 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
2481 (exceptions_state_mc_action_iter)
2482 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2484 [__cplusplus] (try_scope_depth): New global.
2485 [__cplusplus] (exception_try_scope_entry)
2486 (exception_try_scope_exit, gdb_exception_sliced_copy)
2487 (exception_rethrow): New functions.
2488 (throw_exception): In C++ mode, throw
2489 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
2490 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
2491 (throw_it): In C++ mode, use try_scope_depth.
2492 * common/common-exceptions.h [!__cplusplus]
2493 (exceptions_state_mc_action_iter)
2494 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2496 [__cplusplus] (exception_try_scope_entry)
2497 (exception_try_scope_exit, exception_rethrow): Declare.
2498 [__cplusplus] (struct exception_try_scope): New struct.
2499 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
2501 (struct gdb_exception_RETURN_MASK_ALL)
2502 (struct gdb_exception_RETURN_MASK_ERROR)
2503 (struct gdb_exception_RETURN_MASK_QUIT): New types.
2505 2015-03-07 Pedro Alves <palves@redhat.com>
2507 * main.c (handle_command_errors): Remove volatile qualifier from
2510 2015-03-07 Pedro Alves <palves@redhat.com>
2512 * breakpoint.c (save_breakpoints): Adjust to avoid code between
2514 * gdbtypes.c (safe_parse_type): Remove empty line.
2515 (types_deeply_equal):
2516 * guile/scm-frame.c (gdbscm_frame_name):
2517 * linux-thread-db.c (find_new_threads_once):
2518 * python/py-breakpoint.c (bppy_get_commands):
2519 * record-btrace.c (record_btrace_insert_breakpoint)
2520 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
2521 (record_btrace_start_replaying): Adjust to avoid code between TRY
2524 2015-03-07 Pedro Alves <palves@redhat.com>
2526 * common/common-exceptions.c (struct catcher) <exception>: No
2527 longer a pointer to volatile exception. Now an exception value.
2528 <mask>: Delete field.
2529 (exceptions_state_mc_init): Remove all parameters. Adjust.
2530 (exceptions_state_mc): No longer pop the catcher here.
2531 (exceptions_state_mc_catch): New function.
2532 (throw_exception): Adjust.
2533 * common/common-exceptions.h (exceptions_state_mc_init): Remove
2535 (exceptions_state_mc_catch): Declare.
2536 (TRY_CATCH): Rename to ...
2537 (TRY): ... this. Remove EXCEPTION and MASK parameters.
2538 (CATCH, END_CATCH): New.
2539 All callers adjusted.
2541 2015-03-07 Tom Tromey <tromey@redhat.com>
2543 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
2545 2015-03-07 Pedro Alves <palves@redhat.com>
2547 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
2548 (amd64_epilogue_frame_cache): Normal exception handling code.
2549 * break-catch-throw.c (check_status_exception_catchpoint)
2550 (re_set_exception_catchpoint): Ditto.
2551 * cli/cli-interp.c (safe_execute_command):
2552 * cli/cli-script.c (script_from_file): Ditto.
2553 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
2555 * compile/compile-object-run.c (compile_object_run): Ditto.
2556 * cp-abi.c (baseclass_offset): Ditto.
2557 * cp-valprint.c (cp_print_value): Ditto.
2558 * exceptions.c (catch_exceptions_with_msg):
2559 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
2560 * frame.c (get_frame_address_in_block_if_available): Ditto.
2561 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
2562 (i386_sigtramp_frame_cache): Ditto.
2563 * infcmd.c (post_create_inferior): Ditto.
2564 * linespec.c (parse_linespec, find_linespec_symbols):
2565 * p-valprint.c (pascal_object_print_value): Ditto.
2566 * parse.c (parse_expression_for_completion): Ditto.
2567 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
2568 * remote.c (remote_get_noisy_reply): Ditto.
2569 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
2570 * solib-svr4.c (solib_svr4_r_map): Ditto.
2572 2015-03-06 Gary Benson <gbenson@redhat.com>
2574 * common/common-utils.h (startswith): New inline function.
2575 All places where this logic was used updated to use the above.
2577 2015-03-05 Pedro Alves <palves@redhat.com>
2580 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
2581 after reading the breakpoint's shadow memory.
2583 2015-03-05 Mark Kettenis <kettenis@gnu.org>
2585 * hppabsd-nat.c: Remove file.
2586 * hppaobsd-nat.c: New file.
2587 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
2589 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
2592 2015-03-04 Pedro Alves <palves@redhat.com>
2594 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
2595 (target_decr_pc_after_break): Delete declaration.
2596 * target.c (default_target_decr_pc_after_break)
2597 (target_decr_pc_after_break): Delete.
2598 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
2599 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
2600 * linux-thread-db.c (check_event): Likewise.
2601 * infrun.c (adjust_pc_after_break): Likewise.
2602 * darwin-nat.c (cancel_breakpoint): Likewise.
2603 * aix-thread.c (aix_thread_wait): Likewise.
2604 * target-delegates.c: Regenerate.
2606 2015-03-04 Pedro Alves <palves@redhat.com>
2608 * linux-nat.c (save_sigtrap): Check for breakpoints before
2609 checking watchpoints.
2610 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
2611 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
2612 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
2613 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
2614 (linux_nat_stopped_by_sw_breakpoint)
2615 (linux_nat_supports_stopped_by_sw_breakpoint)
2616 (linux_nat_stopped_by_hw_breakpoint)
2617 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
2618 (linux_nat_wait_1): Don't re-increment the PC if relying on
2619 SIGTRAP's siginfo->si_code.
2620 (linux_nat_add_target): Install new target methods.
2621 * linux-thread-db.c (check_event): Don't account for breakpoint PC
2622 offset if the target already adjusted the PC.
2623 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
2624 (GDB_ARCH_TRAP_BRKPT): New.
2625 (TRAP_HWBKPT): Define if not already defined.
2627 2015-03-04 Pedro Alves <palves@redhat.com>
2629 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
2630 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
2632 <stop_reason>: New field.
2633 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
2634 (packet_set_cmd_state): New function.
2635 (remote_protocol_features): Register the "swbreak" and "hwbreak"
2637 (remote_query_supported): If not disabled with the corresponding
2638 "set remote foo-packet" command, report support for the swbreak
2639 and hwbreak features.
2640 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
2642 <stop_reason>: New field.
2643 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
2644 (remote_wait_as): Adjust.
2645 (remote_stopped_by_sw_breakpoint)
2646 (remote_supports_stopped_by_sw_breakpoint)
2647 (remote_stopped_by_hw_breakpoint)
2648 (remote_supports_stopped_by_hw_breakpoint): New functions.
2649 (remote_stopped_by_watchpoint): New function.
2650 (init_remote_ops): Install them.
2651 (_initialize_remote): Register new "set/show remote
2652 swbreak-feature-packet" and "set/show remote
2653 swbreak-feature-packet" commands.
2655 2015-03-04 Pedro Alves <palves@redhat.com>
2657 * btrace.h: Include target/waitstatus.h.
2658 (struct btrace_thread_info) <stop_reason>: New field.
2659 * record-btrace.c (record_btrace_step_thread): Use
2660 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
2661 (record_btrace_decr_pc_after_break): Delete.
2662 (record_btrace_stopped_by_sw_breakpoint)
2663 (record_btrace_supports_stopped_by_sw_breakpoint)
2664 (record_btrace_stopped_by_hw_breakpoint)
2665 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
2666 (init_record_btrace_ops): Install them.
2667 * record-full.c (record_full_hw_watchpoint): Delete and replace
2669 (record_full_stop_reason): ... this throughout.
2670 (record_full_exec_insn): Adjust.
2671 (record_full_wait_1): Adjust. No longer re-increment the PC.
2672 (record_full_wait_1): Adjust. Use
2673 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
2674 (record_full_stopped_by_watchpoint): Adjust.
2675 (record_full_stopped_by_sw_breakpoint)
2676 (record_full_supports_stopped_by_sw_breakpoint)
2677 (record_full_supports_stopped_by_sw_breakpoint)
2678 (record_full_stopped_by_hw_breakpoint)
2679 (record_full_supports_stopped_by_hw_breakpoint): New functions.
2680 (init_record_full_ops, init_record_full_core_ops): Install them.
2681 * record.c (record_check_stopped_by_breakpoint): New function.
2682 * record.h: Include target/waitstatus.h.
2683 (record_check_stopped_by_breakpoint): New declaration.
2685 2015-03-04 Pedro Alves <palves@redhat.com>
2687 enum lwp_stop_reason -> enum target_stop_reason
2688 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
2689 (linux_nat_stopped_by_watchpoint, status_callback)
2690 (linux_nat_wait_1): Adjust.
2691 * linux-nat.h (enum lwp_stop_reason): Delete.
2692 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
2693 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
2694 * target/waitstatus.h (enum target_stop_reason): New.
2696 2015-03-04 Pedro Alves <palves@redhat.com>
2698 * breakpoint.c (need_moribund_for_location_type): New function.
2699 (bpstat_stop_status): Don't skipping checking moribund locations
2700 of breakpoint types which the target tell caused a stop.
2701 (program_breakpoint_here_p): New function, factored out from ...
2702 (bp_loc_is_permanent): ... this.
2703 (update_global_location_list): Don't create a moribund location if
2704 the target supports reporting stops of the type of the removed
2706 * breakpoint.h (program_breakpoint_here_p): New declaration.
2707 * infrun.c (adjust_pc_after_break): Return early if the target has
2708 already adjusted the PC. Add comments.
2709 (handle_signal_stop): If nothing explains a signal, and the target
2710 tells us the stop was caused by a software breakpoint, check if
2711 there's a breakpoint instruction in the memory. If so, adjust the
2712 PC before presenting the stop to the user. Otherwise, ignore the
2713 trap. If nothing explains a signal, and the target tells us the
2714 stop was caused by a hardware breakpoint, ignore the trap.
2715 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
2716 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
2717 to_supports_stopped_by_hw_breakpoint>: New fields.
2718 (target_stopped_by_sw_breakpoint)
2719 (target_supports_stopped_by_sw_breakpoint)
2720 (target_stopped_by_hw_breakpoint)
2721 (target_supports_stopped_by_hw_breakpoint): Define.
2722 * target-delegates.c: Regenerate.
2724 2015-03-04 Pedro Alves <palves@redhat.com>
2726 * infrun.c (follow_fork_inferior): Use the whole of the
2727 inferior_ptid and pending_follow.related_pid ptids instead of
2728 building ptids from the process components. Adjust verbose output
2729 to use target_pid_to_str.
2730 * linux-nat.c (linux_child_follow_fork): Use the whole of the
2731 inferior_ptid and pending_follow.related_pid ptids instead of
2732 building ptids from the process components.
2734 2015-03-04 Mark Kettenis <kettenis@gnu.org>
2736 * inf-ptrace.c [PT_GET_PROCESS_STATE]
2737 (inf_ptrace_insert_fork_catchpoint): New function.
2738 (inf_ptrace_remove_fork_catchpoint): New function.
2739 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
2741 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2743 * s390-linux-tdep.c (s390_register_name): Return empty string
2744 instead of NULL for registers that shouldn't be visible.
2746 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2748 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
2749 XML file for 64-bit targets.
2751 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
2753 * target.h (find_default_create_inferior): Remove declaration.
2754 (find_default_attach): Likewise.
2756 2015-03-03 Pedro Alves <palves@redhat.com>
2758 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
2759 Use ptid_get_pid to get the overall process id when resuming all
2762 2015-03-03 Pedro Alves <palves@redhat.com>
2764 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
2765 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
2766 * inf-ptrace.c (get_ptrace_pid): New function.
2767 (inf_ptrace_resume): Use it.
2768 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
2771 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
2773 * nat/linux-btrace.c: Include sys/utsname.h.
2774 (linux_determine_kernel_ptr_bits): New.
2775 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
2776 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
2779 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
2781 * btrace.c (ftrace_update_function): Treat return as tailcall for
2782 "_dl_runtime_resolve".
2784 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
2786 * btrace.h (btrace_function) <lbegin, lend>: Remove.
2787 * btrace.c (ftrace_debug): Do not print the line range.
2788 (ftrace_skip_file, ftrace_update_lines): Remove.
2789 (ftrace_new_function): Remove lbegin and lend initialization.
2790 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
2791 * record-btrace.c (btrace_compute_src_line_range): New.
2792 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
2794 2015-03-02 Pedro Alves <palves@redhat.com>
2796 * infrun.c (follow_exec): Delete all threads of the process except
2797 the event thread. Extended comments.
2799 2015-03-02 Joel Brobecker <brobecker@adacore.com>
2801 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
2803 2015-03-02 Joel Brobecker <brobecker@adacore.com>
2805 * utils.h: Remove <stdbool.h> #include.
2806 (producer_is_gcc): Change return type to "int".
2807 * utils.c (producer_is_gcc): Change return type to int.
2808 Return 1 instead of true, and 0 instead of false.
2809 Adjust function documentation accordingly.
2811 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
2813 * s390-linux-nat.c (have_regset_vxrs): New static variable.
2814 (s390_linux_fetch_inferior_registers): Handle vector registers, if
2816 (s390_linux_store_inferior_registers): Likewise.
2817 (s390_get_hwcap): Remove function. Embed its logic...
2818 (s390_read_description): ...here. Yield a target description with
2819 vector registers if applicable.
2820 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
2821 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
2822 "features/s390x-tevx-linux64.c".
2823 (struct gdbarch_tdep) <v0_full_regnum>: New field.
2824 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
2825 for "GNU/Linux-specific registers".
2826 (s390_dwarf_reg_r0l): New enum value.
2827 (s390_dwarf_reg_to_regnum): Support vector registers.
2828 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
2829 of GPR lower halves.
2830 (regnum_is_vxr_full): New function.
2831 (s390_register_name): New function.
2832 (s390_pseudo_register_name): Handle v0-v15, which are composed of
2833 f0-f15 and v0l-v15l.
2834 (s390_pseudo_register_type): Likewise.
2835 (s390_pseudo_register_read): Likewise.
2836 (s390_pseudo_register_write): Likewise.
2837 (s390_value_from_register): Account for the fact that values are
2838 placed left-justified in vector registers.
2839 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
2840 the vector reggroup and omit them from the general reggroup.
2841 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
2842 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
2843 (s390_iterate_over_regset_sections): Add iterations for the two
2845 (s390_core_read_description): Yield a target description with
2846 vector registers if applicable.
2847 (s390_gdbarch_init): Handle target descriptions with vector
2848 registers. Add "register_name" gdbarch method.
2849 (_initialize_s390_tdep): Call new tdesc initialization functions.
2850 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
2851 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
2852 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
2853 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
2854 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
2855 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
2856 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
2857 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
2858 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
2859 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
2860 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
2861 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
2862 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
2863 (S390_NUM_REGS): Adjust value.
2864 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
2865 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
2866 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
2867 * NEWS: Announce S/390 vector register support.
2869 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
2871 * features/s390-tevx-linux64.xml: New file.
2872 * features/s390-vx-linux64.xml: New file.
2873 * features/s390-vx.xml: New file.
2874 * features/s390x-tevx-linux64.xml: New file.
2875 * features/s390x-vx-linux64.xml: New file.
2876 * features/Makefile (WHICH): Add s390-vx-linux64,
2877 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
2878 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
2879 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
2881 * features/s390-tevx-linux64.c: New generated file.
2882 * features/s390-vx-linux64.c: Likewise.
2883 * features/s390x-tevx-linux64.c: Likewise.
2884 * features/s390x-vx-linux64.c: Likewise.
2885 * regformats/s390-tevx-linux64.dat: Likewise.
2886 * regformats/s390-vx-linux64.dat: Likewise.
2887 * regformats/s390x-tevx-linux64.dat: Likewise.
2888 * regformats/s390x-vx-linux64.dat: Likewise.
2890 2015-02-28 Doug Evans <xdje42@gmail.com>
2892 * symtab.h (struct symtab) <next>: Fix comment.
2894 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
2896 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
2899 2015-02-27 Pedro Alves <palves@redhat.com>
2901 * dtrace-probe.c (dtrace_probe_ops): Make extern.
2903 2015-02-27 Pedro Alves <palves@redhat.com>
2905 * common/common-exceptions.h (exception_none): Declare.
2906 * common/common-exceptions.c (exception_none): Moved from
2908 (exceptions_state_mc_init): Use exception_none.
2909 * exceptions.c (exception_none): Move to
2910 common/common-exceptions.c.
2911 * exceptions.h (exception_none): Move to
2912 common/common-exceptions.h.
2914 2015-02-27 Pedro Alves <palves@redhat.com>
2916 * main.c (catch_command_errors, catch_command_errors_const):
2917 Remove 'mask' argument. Adjust.
2918 (captured_main): Adjust callers.
2920 2015-02-27 Pedro Alves <palves@redhat.com>
2922 * python/python-internal.h: Include "extension-priv.h".
2924 2015-02-27 Pedro Alves <palves@redhat.com>
2926 * breakpoint.h (enum print_stop_action): Move further up in the
2929 2015-02-27 Pedro Alves <palves@redhat.com>
2931 * gdbarch.sh: Include regcache.h.
2932 * gdbarch.h: Regenerate.
2934 2015-02-27 Pedro Alves <palves@redhat.com>
2936 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
2937 Remove duplicate const.
2938 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
2941 2015-02-27 Pedro Alves <palves@redhat.com>
2943 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
2944 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
2945 * features/feature_to_c.sh: Tag the generated xml_builtin array
2946 with extern const in C++ mode.
2948 2015-02-27 Tom Tromey <tromey@redhat.com>
2950 * minidebug.c (struct lzma_stream): Rename to ...
2951 (struct gdb_lzma_stream): ... this.
2952 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
2954 2015-02-27 Pedro Alves <palves@redhat.com>
2956 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
2958 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
2959 (mi_cmd_stack_list_variables): Use it.
2961 2015-02-27 Pedro Alves <palves@redhat.com>
2963 * x86-linux-nat.c (u_debugreg_offset): New function.
2964 (x86_linux_dr_get, x86_linux_dr_set): Use it.
2966 2015-02-27 Pedro Alves <palves@redhat.com>
2968 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
2970 Include break-common.h.
2972 2015-02-27 Tom Tromey <tromey@redhat.com>
2973 Pedro Alves <palves@redhat.com>
2975 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
2976 local used to iterate over enums.
2977 * completer.c (signal_completer): Likewise.
2978 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
2979 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
2980 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
2981 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
2982 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
2983 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
2984 * tui-wingeneral.c (tui_refresh_all): Likewise.
2986 2015-02-27 Pedro Alves <palves@redhat.com>
2988 * target.h: Include "infrun.h".
2990 2015-02-27 Pedro Alves <palves@redhat.com>
2992 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
2994 2015-02-27 Pedro Alves <palves@redhat.com>
2996 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
2998 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3000 2015-02-27 Pedro Alves <palves@redhat.com>
3002 * cli-out.c (_rl_erase_entire_line): Move declaration out of
3003 cli_mld_erase_entire_line, and make it extern "C".
3004 * common/common-defs.h (EXTERN_C): New.
3005 * completer.c (_rl_completion_prefix_display_length)
3006 (_rl_print_completions_horizontally, QSFUNC): Move declarations
3007 out of gdb_display_match_list_1.
3008 (_rl_qsort_string_compare): Move declaration out of
3009 gdb_display_match_list_1, and make it extern "C".
3010 * defs.h (re_comp): Use EXTERN_C.
3011 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3012 and make it extern "C".
3013 (monstartup): Move declaration out of maintenance_set_profile_cmd,
3014 and make it extern "C".
3015 (main): Move declaration out of maintenance_set_profile_cmd.
3016 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3019 2015-02-27 Pedro Alves <palves@redhat.com>
3021 * python/python.c (GdbMethods): Rename to ...
3022 (python_GdbMethods): ... this and make extern.
3023 (GdbModuleDef): Rename to ...
3024 (python_GdbModuleDef): ... this and make extern.
3026 2015-02-27 Pedro Alves <palves@redhat.com>
3028 * record-btrace.c (set_record_btrace_cmdlist)
3029 (show_record_btrace_cmdlist): Remove redefinitions.
3031 2015-02-27 Tom Tromey <tromey@redhat.com>
3032 Pedro Alves <palves@redhat.com>
3034 * dwarf2-frame.c (enum cfa_how_kind, struct
3035 dwarf2_frame_state_reg_info): Move out of struct
3037 * dwarf2read.c (struct tu_stats): Move out of struct
3039 (struct file_entry): Move out of struct line_header.
3040 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3041 typedef_field_list): Move out of struct field_info.
3042 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3043 Move out of struct dynamic_prop.
3044 (union type_owner, union field_location, struct field, struct
3045 range_bounds, union type_specific): Move out of struct main_type.
3046 (struct fn_fieldlist, struct fn_field, struct typedef_field)
3047 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3048 (struct call_site_target, union call_site_parameter_u, struct
3049 call_site_parameter): Move out of struct call_site.
3050 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3052 (enum srcdest_kind): Move out of struct srcdest.
3053 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3054 * prologue-value.h (enum prologue_value_kind): Move out of struct
3056 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3058 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3059 out of struct field_info.
3060 * symfile.h (struct other_sections): Move out of struct
3062 * symtab.c (struct symbol_cache_slot): Move out struct
3064 * target-descriptions.c (enum tdesc_type_kind): Move out of
3065 typedef struct tdesc_type.
3066 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3067 struct tui_line_or_address.
3068 * value.c (enum internalvar_kind, union internalvar_data): Move
3069 out of struct internalvar.
3070 * xtensa-tdep.h (struct ctype_cache): Move out of struct
3073 2015-02-27 Tom Tromey <tromey@redhat.com>
3074 Pedro Alves <palves@redhat.com>
3076 Rename symbols whose names are reserved C++ keywords throughout.
3078 2015-02-27 Pedro Alves <palves@redhat.com>
3080 * Makefile.in (COMPILER): New, get it from autoconf.
3081 (COMPILE.pre, CC_LD): Use COMPILER.
3082 (CXX): Get from autoconf instead.
3083 (CXX_FOR_TARGET): Default to g++ instead of gcc.
3084 * acinclude.m4: Include build-with-cxx.m4.
3085 * build-with-cxx.m4: New file.
3086 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3087 Disable -Werror by default if building in C++ mode.
3088 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3089 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
3090 Run supported-warning-flags tests with the C++ compiler.
3091 Save/restore CXXFLAGS too.
3092 * configure: Regenerate.
3094 2015-02-27 Pedro Alves <palves@redhat.com>
3096 * libiberty.m4: New file.
3097 * acinclude.m4: Include libiberty.m4.
3098 * configure.ac: Call libiberty_INIT.
3099 * config.in, configure: Regenerate.
3101 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
3103 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3104 31-bit targets, but 64-bit targets as well.
3105 (s390_gnu_triplet_regexp): New function.
3106 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3107 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
3110 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
3112 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
3113 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
3114 from CONTEXT_DEBUGGER.
3116 2015-02-26 Doug Evans <dje@google.com>
3118 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
3120 (set_type_vptr_fieldno): Ditto.
3121 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
3122 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
3124 2015-02-26 Pedro Alves <palves@redhat.com>
3126 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
3127 * complaints.c (vcomplaint): Pass argument FMT directly to
3128 printf-like functions instead of complaint->fmt.
3129 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
3130 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
3131 * compile/compile-loc2c.c (pushf, unary, binary): Add
3133 (do_compile_dwarf_expr_to_c): Pass string literal as format string
3135 (BINARY): Pass string literal as format string to 'binary'.
3136 * compile/compile-object-load.c (link_callbacks_einfo): Add
3138 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
3140 2015-02-26 Pedro Alves <palves@redhat.com>
3142 * windows-termcap.c: Rename to ...
3143 * stub-termcap.c: ... this. Adjust header line.
3144 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3146 * configure: Regenerate.
3147 * configure.ac: Refer to stub-termcap.o instead of
3149 * gdb_curses.h: Mention stub-termcap.c instead of
3152 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3154 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3155 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3157 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
3159 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3161 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3163 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3164 bfd_canonicalize_symtab.
3166 2015-02-25 John Baldwin <jhb@FreeBSD.org>
3168 * amd64fbsd-nat.c: Include sys/user.h.
3169 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3170 instead of KERN_PS_STRINGS to locate the signal trampoline.
3171 * i386fbsd-nat.c: Include sys/user.h.
3172 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3173 instead of KERN_PS_STRINGS to locate the signal trampoline.
3174 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3175 (amd64fbsd_sigtramp_p): New.
3176 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3177 longer set default values.
3178 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3179 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3180 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3181 (i386fbsd_freebsd4_sigtramp_start)
3182 (i386fbsd_freebsd4_sigtramp_middle)
3183 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3184 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3185 (i386fbsd_sigtramp_p): New.
3186 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3187 longer set default values.
3188 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3190 2015-02-25 John Baldwin <jhb@freebsd.org>
3192 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3193 get_frame_register instead of frame_unwind_register_unsigned.
3195 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3198 * compile/compile-c-support.c (c_compute_program): Change // comment.
3199 * compile/compile-object-load.c (setup_sections): Change // comment.
3201 2015-02-26 Joel Brobecker <brobecker@adacore.com>
3204 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3206 2015-02-23 Pedro Alves <palves@redhat.com>
3208 * remote.c (skip_to_semicolon): New function.
3209 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
3210 special case the stop reasons that look like hex numbers
3211 upfront. Instead handle real register numbers after matching
3212 all the known stop reasons.
3214 2015-02-21 Doug Evans <dje@google.com>
3216 PR c++/17976, symtab/17821
3217 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3218 is_in_anonymous. All callers updated.
3219 (find_symbol_in_baseclass): Ditto.
3220 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
3221 for symbols in an anonymous namespace.
3222 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3223 DW_AT_name directly.
3224 (dwarf2_name): Convert missing namespace name to
3225 CP_ANONYMOUS_NAMESPACE_STR.
3227 2015-02-20 Pedro Alves <palves@redhat.com>
3229 * linux-nat.c (linux_handle_extended_wait): Call
3230 thread_db_notice_clone whenever a new clone LWP is detected.
3231 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3233 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3234 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3235 (linux_unstop_all_lwps): Declare.
3236 * linux-thread-db.c (struct thread_get_info_inout): Delete.
3237 (thread_get_info_callback): Delete.
3238 (thread_from_lwp): Use td_thr_get_info and record_thread.
3239 (thread_db_attach_lwp): Delete.
3240 (thread_db_notice_clone): New function.
3241 (try_thread_db_load_1): If /proc is mounted and shows the
3242 process'es task list, walk over all LWPs and call thread_from_lwp
3243 instead of relying on td_ta_thr_iter.
3244 (attach_thread): Don't call check_thread_signals here. Split the
3245 tail part of the function (which adds the thread to the core GDB
3247 (record_thread): ... this function. Call check_thread_signals
3249 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
3250 call thread_from_lwp.
3251 (thread_db_update_thread_list): Rename to ...
3252 (thread_db_update_thread_list_org): ... this.
3253 (thread_db_update_thread_list): New function.
3254 (thread_db_find_thread_from_tid): Delete.
3255 (thread_db_get_ada_task_ptid): Simplify.
3256 * nat/linux-procfs.c: Include <sys/stat.h>.
3257 (linux_proc_task_list_dir_exists): New function.
3258 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
3260 2015-02-20 Pedro Alves <palves@redhat.com>
3262 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
3263 main LWP. Handle the case of waitpid returning 0 if we're already
3264 attached to the LWP. Don't set the LWP's last_resume_kind to
3265 resume_stop if we already knew about the LWP.
3266 (linux_nat_filter_event): Add debug logs.
3268 2015-02-20 Pedro Alves <palves@redhat.com>
3270 * target.h (forward_target_decr_pc_after_break): Delete
3273 2015-02-20 Pedro Alves <palves@redhat.com>
3276 * linux-thread-db.c (thread_get_info_callback): Return early if
3277 the thread's lwp id is -1.
3279 2015-02-20 Joel Brobecker <brobecker@adacore.com>
3283 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
3285 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
3286 (dtrace_get_probes) Change type of variable 'dof'.
3288 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
3290 PR breakpoints/16812
3291 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
3292 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
3293 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
3295 2015-02-19 David Taylor <dtaylor@emc.com>
3297 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
3299 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
3301 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
3303 (tui_putc): Don't call tui_handle_resize_during_io.
3304 (tui_getc): Likewise.
3305 (tui_mld_getc): Likewise.
3306 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
3307 (tui_sigwinch_token): New static variable.
3308 (tui_initialize_win): Adjust documentation. Set
3310 (tui_async_resize_screen): New asynchronous callback.
3311 (tui_sigwinch_handler): Adjust documentation. Asynchronously
3312 invoke tui_async_resize_screen.
3314 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
3316 * configure: Regenerated.
3317 * configure.ac: Use GDB_AC_TRANSFORM.
3318 * Makefile.in (aclocal_m4_deps): Added transform.m4.
3319 * acinclude.m4: sinclude transform.m4.
3320 * transform.m4: New file.
3321 (GDB_AC_TRANSFORM): New macro.
3323 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3325 * NEWS: Announce the support for DTrace SDT probes.
3327 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3329 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
3330 (amd64_dtrace_parse_probe_argument): New function.
3331 (amd64_dtrace_probe_is_enabled): Likewise.
3332 (amd64_dtrace_enable_probe): Likewise.
3333 (amd64_dtrace_disable_probe): Likewise.
3334 (amd64_linux_init_abi): Register the
3335 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
3336 `gdbarch_dtrace_disable_probe' and
3337 `gdbarch_dtrace_probe_is_enabled' hooks.
3338 (amd64_dtrace_disabled_probe_sequence_1): New constant.
3339 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
3340 (amd64_dtrace_enable_probe_sequence): Likewise.
3341 (amd64_dtrace_disable_probe_sequence): Likewise.
3343 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3345 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
3346 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
3347 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
3349 * Makefile.in (SFILES): dtrace-probe.c added.
3350 * configure: Regenerate.
3351 * dtrace-probe.c: New file.
3352 (SHT_SUNW_dof): New constant.
3353 (dtrace_probe_type): New enum.
3354 (dtrace_probe_arg): New struct.
3355 (dtrace_probe_arg_s): New typedef.
3356 (struct dtrace_probe_enabler): New struct.
3357 (dtrace_probe_enabler_s): New typedef.
3358 (dtrace_probe): New struct.
3359 (dtrace_probe_is_linespec): New function.
3360 (dtrace_dof_sect_type): New enum.
3361 (dtrace_dof_dofh_ident): Likewise.
3362 (dtrace_dof_encoding): Likewise.
3363 (DTRACE_DOF_ENCODE_LSB): Likewise.
3364 (DTRACE_DOF_ENCODE_MSB): Likewise.
3365 (dtrace_dof_hdr): New struct.
3366 (dtrace_dof_sect): Likewise.
3367 (dtrace_dof_provider): Likewise.
3368 (dtrace_dof_probe): Likewise.
3369 (DOF_UINT): New macro.
3370 (DTRACE_DOF_PTR): Likewise.
3371 (DTRACE_DOF_SECT): Likewise.
3372 (dtrace_process_dof_probe): New function.
3373 (dtrace_process_dof): Likewise.
3374 (dtrace_build_arg_exprs): Likewise.
3375 (dtrace_get_arg): Likewise.
3376 (dtrace_get_probes): Likewise.
3377 (dtrace_get_probe_argument_count): Likewise.
3378 (dtrace_can_evaluate_probe_arguments): Likewise.
3379 (dtrace_evaluate_probe_argument): Likewise.
3380 (dtrace_compile_to_ax): Likewise.
3381 (dtrace_probe_destroy): Likewise.
3382 (dtrace_gen_info_probes_table_header): Likewise.
3383 (dtrace_gen_info_probes_table_values): Likewise.
3384 (dtrace_probe_is_enabled): Likewise.
3385 (dtrace_probe_ops): New variable.
3386 (info_probes_dtrace_command): New function.
3387 (_initialize_dtrace_probe): Likewise.
3388 (dtrace_type_name): Likewise.
3390 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3392 * gdbarch.sh (dtrace_parse_probe_argument): New.
3393 (dtrace_probe_is_enabled): Likewise.
3394 (dtrace_enable_probe): Likewise.
3395 (dtrace_disable_probe): Likewise.
3396 * gdbarch.c: Regenerate.
3397 * gdbarch.h: Regenerate.
3399 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3401 * stap-probe.c (stap_probe_ops): Add NULLs in the static
3402 stap_probe_ops for `enable_probe' and `disable_probe'.
3403 * probe.c (enable_probes_command): New function.
3404 (disable_probes_command): Likewise.
3405 (_initialize_probe): Define the cli commands `enable probe' and
3407 (parse_probe_linespec): New function.
3408 (info_probes_for_ops): Use parse_probe_linespec.
3409 * probe.h (probe_ops): New hooks `enable_probe' and
3412 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3414 * probe.c (compute_probe_arg): Moved from stap-probe.c
3415 (compile_probe_arg): Likewise.
3416 (probe_funcs): Likewise.
3417 * stap-probe.c (compute_probe_arg): Moved to probe.c.
3418 (compile_probe_arg): Likewise.
3419 (probe_funcs): Likewise.
3421 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3423 * probe.c (print_ui_out_not_applicables): New function.
3424 (exists_probe_with_pops): Likewise.
3425 (info_probes_for_ops): Do not include column headers for probe
3426 types for which no probe has been actually found on any object.
3427 Also invoke `print_ui_out_not_applicables' in order to match the
3428 column rows with the header when probes of several types are
3430 Print the "Type" column.
3431 * probe.h (probe_ops): Added a new probe operation `type_name'.
3432 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
3433 (stap_type_name): New function.
3435 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
3437 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
3438 (key_is_command_char): Delete.
3440 2015-02-17 Pedro Alves <palves@redhat.com>
3442 * tui/tui.c (tui_enable): Resize windows before anything
3443 might show a window.
3445 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
3448 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
3449 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
3451 * aarch64-tdep.h (tdesc_aarch64): Declare.
3453 2015-02-12 Mark Wielaard <mjw@redhat.com>
3455 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
3457 2015-02-13 Doug Evans <dje@google.com>
3459 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
3460 anonymous_namespace to is_in_anonymous for consistency with the rest
3462 (cp_lookup_bare_symbol): Fix typo in comment.
3463 (cp_search_static_and_baseclasses): Ditto.
3464 (search_symbol_list): Use vertical space in comment better.
3465 (reset_directive_searched): Ditto. Fix typo.
3466 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
3468 2015-02-13 Yao Qi <yao.qi@arm.com>
3470 * MAINTAINERS: Update my email address.
3472 2015-02-12 Doug Evans <dje@google.com>
3474 * symtab.c (completion_list_add_name): Fix memory leak.
3476 2015-02-12 Doug Evans <dje@google.com>
3478 * completer.c (complete_line): Remove incorrect comment.
3480 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3482 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
3483 (py_print_frame): Use RETURN_MASK_ERROR.
3485 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3487 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
3488 function comment. Wrap all function that can throw in cleanups.
3489 (gdbpy_apply_frame_filter): Wrap all function that can throw in
3492 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3494 * python/py-framefilter.c (py_print_frame): Substitute goto error.
3495 Remove the error label.
3497 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3499 * python/py-framefilter.c (py_print_frame): Put conditional code paths
3500 with goto first, indent the former else codepath left. Put variable
3501 'elided' to a new inner block.
3503 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3505 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
3507 2015-02-11 Pedro Alves <palves@redhat.com>
3509 * xcoffread.c (within_function): Delete.
3511 2015-02-11 Tom Tromey <tromey@redhat.com>
3512 Pedro Alves <palves@redhat.com>
3514 * breakpoint.c (base_breakpoint_ops): Delete.
3515 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
3516 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
3517 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
3518 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
3519 * python/py-arch.c (arch_object_type): Make extern.
3520 * python/py-block.c (block_syms_iterator_object_type): Make extern.
3521 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
3522 * python/py-cmd.c (cmdpy_object_type): Make extern.
3523 * python/py-continueevent.c (continue_event_object_type)
3524 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
3525 parameter. Update all callers.
3526 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
3527 * python/py-exitedevent.c (exited_event_object_type): Make extern.
3528 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
3529 * python/py-function.c (fnpy_object_type): Make extern.
3530 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
3531 * python/py-infevents.c (call_pre_event_object_type)
3532 (inferior_call_post_event_object_type).
3533 (memory_changed_event_object_type): Make extern.
3534 * python/py-infthread.c (thread_object_type): Make extern.
3535 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
3536 * python/py-linetable.c (linetable_entry_object_type)
3537 (linetable_object_type, ltpy_iterator_object_type): Make extern.
3538 * python/py-newobjfileevent.c (new_objfile_event_object_type)
3539 (clear_objfiles_event_object_type): Make extern.
3540 * python/py-objfile.c (objfile_object_type): Make extern.
3541 * python/py-param.c (parmpy_object_type): Make extern.
3542 * python/py-progspace.c (pspace_object_type): Make extern.
3543 * python/py-signalevent.c (signal_event_object_type): Make extern.
3544 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
3545 * python/py-type.c (type_object_type, field_object_type)
3546 (type_iterator_object_type): Make extern.
3547 * python/python.c (python_extension_script_ops)
3548 (python_extension_ops): Make extern.
3549 * stap-probe.c (stap_probe_ops): Make extern.
3551 2015-02-11 Pedro Alves <pedro@codesourcery.com>
3553 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
3554 because the event thread is not the current thread.
3556 2015-02-11 Doug Evans <xdje42@gmail.com>
3558 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
3559 been initialized yet, return NULL.
3561 2015-02-11 Doug Evans <dje@google.com>
3563 * symfile.h (new_symfile_objfile): Delete.
3564 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
3565 All callers updated.
3567 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
3569 * tui/tui-io.c (tui_handle_resize_during_io): Call
3570 tui_update_gdb_sizes() after resizing the screen.
3571 * tui/tui.c (tui_enable): Resize the terminal before
3572 calling tui_update_gdb_sizes().
3574 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
3576 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
3577 line before printing a newline.
3579 2015-02-11 Mark Wielaard <mjw@redhat.com>
3581 * utils.c (producer_is_gcc): Return true or false.
3583 2015-02-10 Mark Wielaard <mjw@redhat.com>
3585 * utils.h (producer_is_gcc): Change return type to bool. Add major
3587 * utils.c (producer_is_gcc): Likewise.
3588 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
3589 * dwarf2read.c (check_producer): Likewise.
3591 2015-02-10 Pedro Alves <palves@redhat.com>
3593 * infrun.c (displaced_step_fixup): Switch to the event thread
3594 before calling gdbarch_displaced_step_fixup.
3596 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
3598 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
3600 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
3602 * ada-varobj.c (ada_name_of_child): Constify parent.
3603 (ada_path_expr_of_child): Same.
3604 (ada_value_of_child): Same.
3605 (ada_type_of_child): Same.
3606 * c-varobj.c (c_is_path_expr_parent): Same.
3607 (c_describe_child): Same.
3608 (c_name_of_child): Same.
3609 (c_value_of_child): Same.
3610 (c_type_of_child): Same.
3611 (cplus_number_of_children): Same.
3612 (cplus_describe_child): Constify var.
3613 (cplus_name_of_child): Constify parent.
3614 (cplus_value_of_child): Same.
3615 (cplus_type_of_child): Same.
3616 * jv-varobj.c (java_name_of_child): Same.
3617 (java_value_of_child): Same.
3618 (java_type_of_child): Same.
3619 * varobj.c (value_of_child): Same.
3620 (varobj_default_is_path_expr_parent): Constify var, parent and return
3622 (varobj_get_path_expr): Constify var, modify path_expr through
3624 (install_new_value): Constify parent.
3625 (value_of_child): Constify parent.
3626 * varobj.h (struct varobj): Constify parent.
3627 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
3629 (varobj_get_path_expr): Constify var.
3630 (varobj_get_path_expr_parent): Constify var and return value.
3632 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
3634 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
3635 (arm_prologue_this_id): Move PC and SP limit checks to
3636 arm_prologue_unwind_stop_reason.
3637 (arm_prologue_unwind) <stop_reason> : Set to
3638 arm_prologue_unwind_stop_reason.
3640 2015-02-09 Mark Wielaard <mjw@redhat.com>
3642 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
3643 DW_LANG_Fortran08 as language_fortran.
3645 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
3648 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
3649 of pointer against char.
3651 2015-02-09 Mark Wielaard <mjw@redhat.com>
3653 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
3654 (c_type_print_modifier): Likewise.
3655 * dwarf2read.c (read_tag_atomic_type): New function.
3656 (read_type_die_1): Handle DW_TAG_atomic_type.
3657 * gdbtypes.c (make_atomic_type): New function.
3658 (recursive_dump_type): Handle TYPE_ATOMIC.
3659 * gdbtypes.h (enum type_flag_values): Renumber.
3660 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
3661 (TYPE_ATOMIC): New macro.
3662 (make_atomic_type): Declare.
3664 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3666 * btrace.c (ftrace_find_call): Skip gaps.
3667 (ftrace_new_function): Initialize level.
3668 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
3669 (ftrace_new_switch): Update
3671 (ftrace_new_gap): New.
3672 (ftrace_update_function): Create new function after gap.
3673 (btrace_compute_ftrace_bts): Create gap on error.
3674 (btrace_stitch_bts): Update parameters. Clear trace if it
3676 (btrace_stitch_trace): Update parameters. Update callers.
3677 (btrace_clear): Reset the number of gaps.
3678 (btrace_insn_get): Return NULL if the iterator points to a gap.
3679 (btrace_insn_number): Return zero if the iterator points to a gap.
3680 (btrace_insn_end): Allow gaps at the end.
3681 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
3682 (btrace_find_insn_by_number): Assert that the found iterator does
3684 (btrace_call_next, btrace_call_prev): Assert that the last function
3686 * btrace.h (btrace_bts_error): New.
3687 (btrace_function): Update comment.
3688 (btrace_function) <insn, insn_offset, number>: Update comment.
3689 (btrace_function) <errcode>: New.
3690 (btrace_thread_info) <ngaps>: New.
3691 (btrace_thread_info) <replay>: Update comment.
3692 (btrace_insn_get): Update comment.
3693 * record-btrace.c (btrace_ui_out_decode_error): New.
3694 (record_btrace_info): Print number of gaps.
3695 (btrace_insn_history, btrace_call_history): Call
3696 btrace_ui_out_decode_error for gaps.
3697 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
3699 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3701 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
3702 * nat/linux-btrace.c: (btrace_this_cpu): New.
3703 (cpu_supports_bts): Call btrace_this_cpu.
3704 (intel_supports_bts): Add cpu parameter.
3706 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3708 * btrace.h (btrace_insn_class): New.
3709 (btrace_insn) <size, iclass>: New.
3710 * btrace.c (ftrace_find_call): Update parameters. Update users.
3711 Use instruction classification.
3712 (ftrace_new_return): Update parameters. Update users.
3713 (ftrace_update_function): Update parameters. Update users. Use
3714 instruction classification.
3715 (ftrace_update_insns): Update parameters. Update users.
3716 (ftrace_classify_insn): New.
3717 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
3718 TRY_CATCH around call to gdb_insn_length.
3720 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3722 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
3723 Update parameters. Update users.
3725 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3727 * btrace.c (parse_xml_btrace_conf_bts): Add size.
3728 (btrace_conf_bts_attributes): New.
3729 (btrace_conf_children): Add attributes.
3730 * common/btrace-common.h (btrace_config_bts): New.
3731 (btrace_config)<bts>: New.
3732 (btrace_config): Update comment.
3733 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
3735 * features/btrace-conf.dtd: Increment version. Add size
3736 attribute to bts element.
3737 * record-btrace.c (set_record_btrace_bts_cmdlist,
3738 show_record_btrace_bts_cmdlist): New.
3739 (record_btrace_adjust_size, record_btrace_print_bts_conf,
3740 record_btrace_print_conf, cmd_set_record_btrace_bts,
3741 cmd_show_record_btrace_bts): New.
3742 (record_btrace_info): Call record_btrace_print_conf.
3743 (_initialize_record_btrace): Add commands.
3744 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
3745 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
3746 (btrace_sync_conf): Synchronize bts size.
3747 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
3748 * NEWS: Announce new commands and new packets.
3750 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3752 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
3753 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
3754 (x86_linux_btrace_conf): New.
3755 (x86_linux_create_target): Initialize to_btrace_conf.
3756 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
3757 Check format. Split into this and ...
3758 (linux_enable_bts): ... this.
3759 (linux_btrace_conf): New.
3760 (perf_event_skip_record): Renamed into ...
3761 (perf_event_skip_bts_record): ... this. Updated users.
3762 (linux_disable_btrace): Split into this and ...
3763 (linux_disable_bts): ... this.
3764 (linux_read_btrace): Check format.
3765 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
3766 (linux_btrace_conf): New.
3767 (btrace_target_info)<ptid>: Moved.
3768 (btrace_target_info)<conf>: New.
3769 (btrace_target_info): Split into this and ...
3770 (btrace_tinfo_bts): ... this. Updated users.
3771 * btrace.c (btrace_enable): Update parameters.
3772 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
3773 (btrace_conf_children, btrace_conf_attributes)
3774 (btrace_conf_elements): New.
3775 * btrace.h (btrace_enable): Update parameters.
3776 (btrace_conf, parse_xml_btrace_conf): New.
3777 * common/btrace-common.h (btrace_config): New.
3778 * feature/btrace-conf.dtd: New.
3779 * record-btrace.c (record_btrace_conf): New.
3780 (record_btrace_cmdlist): New.
3781 (record_btrace_enable_warn, record_btrace_open): Pass
3782 &record_btrace_conf.
3783 (record_btrace_info): Print recording format.
3784 (cmd_record_btrace_bts_start): New.
3785 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
3786 (_initialize_record_btrace): Add "record btrace bts" subcommand.
3787 Add "record bts" alias command.
3788 * remote.c (remote_state)<btrace_config>: New.
3789 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
3790 (remote_protocol_features): Add qXfer:btrace-conf:read.
3791 (remote_open_1): Call remote_btrace_reset.
3792 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
3793 (btrace_target_info)<conf>: New.
3794 (btrace_sync_conf, btrace_read_config): New.
3795 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
3797 (remote_btrace_conf): New.
3798 (init_remote_ops): Initialize to_btrace_conf.
3799 (_initialize_remote): Add qXfer:btrace-conf packet.
3800 * target.c (target_enable_btrace): Update parameters.
3801 (target_btrace_conf): New.
3802 * target.h (target_enable_btrace): Update parameters.
3803 (target_btrace_conf): New.
3804 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
3805 (target_ops)<to_enable_btrace>: Update parameters and comment.
3806 (target_ops)<to_btrace_conf>: New.
3807 * target-delegates: Regenerate.
3808 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
3809 (target_debug_print_const_struct_btrace_target_info_p): New.
3810 * NEWS: Announce new command and new packet.
3812 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3814 * nat/linux-btrace.h (perf_event_buffer): New.
3815 (btrace_target_info) <buffer, size, data_head>: Replace with ...
3817 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
3818 (perf_event_buffer_size, perf_event_buffer_begin)
3819 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
3821 (perf_event_new_data): New.
3823 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3825 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
3826 * record-btrace.c (record_btrace_open): Remove call to
3827 target_supports_btrace.
3828 * remote.c (remote_supports_btrace): Update parameters.
3829 * target.c (target_supports_btrace): Update parameters.
3830 * target.h (to_supports_btrace, target_supports_btrace): Update
3832 * target-delegates.c: Regenerate.
3833 * target-debug.h (target_debug_print_enum_btrace_format): New.
3834 * nat/linux-btrace.c
3835 (kernel_supports_btrace): Rename into ...
3836 (kernel_supports_bts): ... this. Update users. Update warning text.
3837 (intel_supports_btrace): Rename into ...
3838 (intel_supports_bts): ... this. Update users.
3839 (cpu_supports_btrace): Rename into ...
3840 (cpu_supports_bts): ... this. Update users.
3841 (linux_supports_btrace): Update parameters. Split into this and ...
3842 (linux_supports_bts): ... this.
3843 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
3845 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3847 * Makefile.in (SFILES): Add common/btrace-common.c.
3848 (COMMON_OBS): Add common/btrace-common.o.
3849 (btrace-common.o): Add build rules.
3850 * btrace.c (parse_xml_btrace): Update parameters.
3851 (parse_xml_btrace_block): Set format field.
3852 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
3853 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
3854 (btrace_compute_ftrace): Split into this and...
3855 (btrace_compute_ftrace_bts): ...this.
3856 (btrace_stitch_trace): Split into this and...
3857 (btrace_stitch_bts): ...this.
3858 * btrace.h (parse_xml_btrace): Update parameters.
3859 (make_cleanup_btrace_data): New.
3860 * common/btrace-common.c: New.
3861 * common/btrace-common.h: Include common-defs.h.
3862 (btrace_block_s): Update comment.
3863 (btrace_format): New.
3864 (btrace_format_string): New.
3865 (btrace_data_bts): New.
3867 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
3868 * remote.c (remote_read_btrace): Update parameters.
3869 * target.c (target_read_btrace): Update parameters.
3870 * target.h (target_read_btrace): Update parameters.
3871 (target_ops)<to_read_btrace>: Update parameters.
3872 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
3873 * target-delegates.c: Regenerate.
3874 * target-debug (target_debug_print_struct_btrace_data_p): New.
3875 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
3876 (linux_read_bts): ...this.
3877 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
3879 2015-02-06 Doug Evans <dje@google.com>
3881 * remote-m32r-sdi.c: Include symfile.h.
3883 2015-02-06 Doug Evans <dje@google.com>
3885 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
3886 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
3889 2015-02-06 Pedro Alves <palves@redhat.com>
3891 * linux-thread-db.c (find_new_threads_callback): Add debug output.
3893 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
3896 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
3897 (enable_count_command): Check args for NULL value.
3899 2015-02-05 Doug Evans <xdje42@gmail.com>
3901 * guile/scm-frame.c: Fix spelling errors in a comment.
3903 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3905 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
3906 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
3909 2015-02-04 Pedro Alves <palves@redhat.com>
3911 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
3912 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
3914 (resume_stopped_resumed_lwps): Don't check whether the thread is
3915 marked as executing.
3916 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
3918 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3920 * regset.h (struct regset): Add flags field.
3921 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
3922 * corelow.c (get_core_register_section): Add warning if the size
3923 exceeds the requested size and the regset does not have the
3924 REGSET_VARIABLE_SIZE flag set.
3925 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
3927 * armbsd-tdep.c (armbsd_gregset): Likewise.
3928 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
3929 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
3930 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
3931 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
3933 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3935 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
3936 For ".reg-xstate", explicitly specify the requested section size
3937 via X86_XSTATE_SIZE instead of just 0 on input and
3938 X86_XSTATE_MAX_SIZE on output.
3939 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
3942 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3945 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
3946 function type, particularly its SIZE parameter.
3947 * gdbarch.h: Regenerate.
3948 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
3949 actual against required size using ">=" instead of "==".
3950 (amd64_collect_fpregset): Likewise.
3951 * i386-tdep.c (i386_supply_gregset): Likewise.
3952 (i386_collect_gregset): Likewise.
3953 (i386_supply_fpregset): Likewise.
3954 (i386_collect_fpregset): Likewise.
3955 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
3956 (mips_fill_gregset_wrapper): Likewise.
3957 (mips_supply_fpregset_wrapper): Likewise.
3958 (mips_fill_fpregset_wrapper): Likewise.
3959 (mips64_supply_gregset_wrapper): Likewise.
3960 (mips64_fill_gregset_wrapper): Likewise.
3961 (mips64_supply_fpregset_wrapper): Likewise.
3962 (mips64_fill_fpregset_wrapper): Likewise.
3963 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
3964 (am33_supply_fpregset_method): Likewise.
3965 (am33_collect_gregset_method): Likewise.
3966 (am33_collect_fpregset_method): Likewise.
3968 2015-02-04 Doug Evans <dje@google.com>
3969 Pedro Alves <palves@redhat.com>
3970 Eli Zaretskii <eliz@gnu.org>
3973 * tui/tui-command.c (tui_refresh_cmd_win): New function.
3974 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
3975 * tui/tui-file.c: #include tui/tui-command.h.
3976 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
3977 (tui_file_flush): Refresh command window if stream is gdb_stdout.
3978 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
3980 2015-02-04 Pedro Alves <palves@redhat.com>
3983 * event-loop.c (gdb_do_one_event): Add default switch case.
3985 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3987 Filter out inferior gcc option -fpreprocessed.
3988 * compile/compile.c (filter_args): New function.
3991 2015-02-03 Pedro Alves <palves@redhat.com>
3993 * event-loop.c: Don't declare nor define a queue type for
3995 (event_queue): Delete.
3996 (create_event, create_file_event, gdb_event_xfree)
3997 (initialize_event_loop, process_event): Delete.
3998 (gdb_do_one_event): Return as soon as one event is handled.
3999 (handle_file_event): Change prototype. Used the passed in
4000 file_handler pointer and ready_mask instead of looping over all
4002 (gdb_wait_for_event): Update the poll/select timeouts before
4003 blocking. Run event handlers directly instead of queueing events.
4004 Return as soon as one event is handled.
4005 (struct async_event_handler_data): Delete.
4006 (invoke_async_event_handler): Delete.
4007 (check_async_event_handlers): Change return type to int. Run
4008 event handlers directly instead of queueing events. Return as
4009 soon as one event is handled.
4010 (handle_timer_event): Delete.
4011 (update_wait_timeout): New function, factored out from
4013 (poll_timers): Reimplement.
4014 * event-loop.h (initialize_event_loop): Delete declaration.
4015 * top.c (gdb_init): Don't call initialize_event_loop.
4017 2015-02-03 Pedro Alves <palves@redhat.com>
4019 * event-loop.c (clear_async_event_handler): New function.
4020 * event-loop.h (clear_async_event_handler): New declaration.
4021 * record-btrace.c (record_btrace_async): New function.
4022 (init_record_btrace_ops): Install record_btrace_async.
4023 * record-full.c (record_full_async): New function.
4024 (record_full_resume): Don't mark the async event source here.
4025 (init_record_full_ops): Install record_full_async.
4026 (record_full_core_resume): Don't mark the async event source here.
4027 (init_record_full_core_ops): Install record_full_async.
4028 * remote.c (remote_async): Mark and clear the async stop reply
4029 queue event-loop token as appropriate.
4031 2015-02-03 Pedro Alves <palves@redhat.com>
4033 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4034 target_is_async_p instead of target_can_async.
4035 (linux_nat_wait): Use target_is_async_p instead of
4036 target_can_async. Don't enable async here.
4037 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4038 target_is_async_p instead of target_can_async.
4040 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
4042 * varobj.h (lang_varobj_ops): Mention which return values need
4045 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4047 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4049 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4052 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4053 results found in the cache.
4055 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4058 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4059 when allocating a new one.
4061 2015-02-01 Tom Tromey <tom@tromey.com>
4063 * MAINTAINERS: Remove myself.
4065 2015-01-31 Doug Evans <xdje42@gmail.com>
4067 * dwarf2read.c (process_structure_scope): Update setting of
4068 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4069 * gdbtypes.c (internal_type_vptr_fieldno): New function.
4070 (set_type_vptr_fieldno): New function.
4071 (internal_type_vptr_basetype): New function.
4072 (set_type_vptr_basetype): New function.
4073 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4075 (allocate_cplus_struct_type): Initialize vptr_fieldno.
4076 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4077 (print_cplus_stuff): ... moved here.
4078 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4079 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4081 (struct cplus_struct_type): ... here. All uses updated.
4082 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4083 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4084 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4085 * stabsread.c (read_tilde_fields): Update setting of
4086 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4088 2015-01-31 Doug Evans <xdje42@gmail.com>
4090 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4092 (cp_print_class_member): Rename local domain to self_type.
4093 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4094 domain_type to self_type.
4095 (set_die_type) <need_gnat_info>: Handle
4096 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4097 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4098 TYPE_SPECIFIC_SELF_TYPE.
4099 * gdbtypes.c (internal_type_self_type): New function.
4100 (set_type_self_type): New function.
4101 (smash_to_memberptr_type): Rename parameter domain to self_type.
4102 Update setting of TYPE_SELF_TYPE.
4103 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4104 (smash_to_method_type): Rename parameter domain to self_type.
4105 Update setting of TYPE_SELF_TYPE.
4106 (check_stub_method): Call smash_to_method_type.
4107 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4108 (copy_type_recursive): Ditto.
4109 * gdbtypes.h (enum type_specific_kind): New value
4110 TYPE_SPECIFIC_SELF_TYPE.
4111 (struct main_type) <type_specific>: New member self_type.
4112 (struct cplus_struct_type) <fn_field.type>: Update comment.
4113 (TYPE_SELF_TYPE): Rewrite.
4114 (internal_type_self_type, set_type_self_type): Declare.
4115 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
4117 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
4118 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
4120 * stabsread.c (read_member_functions): Mark methods with
4121 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
4124 2015-01-31 Doug Evans <xdje42@gmail.com>
4126 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
4129 2015-01-31 Doug Evans <xdje42@gmail.com>
4131 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
4132 or unions. Return zero if union.
4133 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
4134 (gnuv3_rtti_type): Pass already-check_typedef'd value to
4136 (compute_vtable_size): Assert only passed structs.
4137 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
4139 2015-01-31 Doug Evans <xdje42@gmail.com>
4141 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4144 2015-01-31 Gary Benson <gbenson@redhat.com>
4145 Doug Evans <dje@google.com>
4150 * cli/cli-cmds.c (complete_command): Notify user if max-completions
4152 * common/common-exceptions.h (enum errors)
4153 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4154 * completer.h (get_max_completions_reached_message): New declaration.
4155 (max_completions): Likewise.
4156 (completion_tracker_t): New typedef.
4157 (new_completion_tracker): New declaration.
4158 (make_cleanup_free_completion_tracker): Likewise.
4159 (maybe_add_completion_enum): New enum.
4160 (maybe_add_completion): New declaration.
4161 (throw_max_completions_reached_error): Likewise.
4162 * completer.c (max_completions): New global variable.
4163 (new_completion_tracker): New function.
4164 (free_completion_tracker): Likewise.
4165 (make_cleanup_free_completion_tracker): Likewise.
4166 (maybe_add_completions): Likewise.
4167 (throw_max_completions_reached_error): Likewise.
4168 (complete_line): Remove duplicates and limit result to max_completions
4170 (get_max_completions_reached_message): New function.
4171 (gdb_display_match_list): Handle max_completions.
4172 (_initialize_completer): New declaration and function.
4173 * symtab.c: Include completer.h.
4174 (completion_tracker): New static variable.
4175 (completion_list_add_name): Call maybe_add_completion.
4176 (default_make_symbol_completion_list_break_on_1): Renamed from
4177 default_make_symbol_completion_list_break_on. Maintain
4178 completion_tracker across calls to completion_list_add_name.
4179 (default_make_symbol_completion_list_break_on): New function.
4180 * top.c (init_main): Set rl_completion_display_matches_hook.
4181 * tui/tui-io.c: Include completer.h.
4182 (tui_old_rl_display_matches_hook): New static global.
4183 (tui_rl_display_match_list): Notify user if max-completions reached.
4184 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4185 * NEWS (New Options): Mention set/show max-completions.
4187 2015-01-31 Gary Benson <gbenson@redhat.com>
4189 * symtab.c (struct add_name_data) <code>: New field.
4191 (add_symtab_completions): New function.
4192 (symtab_expansion_callback): Likewise.
4193 (default_make_symbol_completion_list_break_on): Set datum.code.
4194 Move minimal symbol scan before calling expand_symtabs_matching.
4195 Scan known primary symtabs for externs and statics before calling
4196 expand_symtabs_matching. Pass symtab_expansion_callback as
4197 expansion_notify argument to expand_symtabs_matching. Do not scan
4198 primary symtabs for externs and statics after calling
4199 expand_symtabs_matching.
4201 2015-01-31 Gary Benson <gbenson@redhat.com>
4203 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4204 (struct quick_symbol_functions) <expand_symtabs_matching>:
4205 New argument expansion_notify. All uses updated.
4206 (expand_symtabs_matching): New argument expansion_notify.
4208 * symfile-debug.c (debug_qf_expand_symtabs_matching):
4209 Also print expansion notify.
4210 * symtab.c (expand_symtabs_matching_via_partial): Call
4211 expansion_notify whenever a partial symbol table is expanded.
4212 * dwarf2read.c (dw2_expand_symtabs_matching): Call
4213 expansion_notify whenever a symbol table is instantiated.
4215 2015-01-31 Doug Evans <xdje42@gmail.com>
4217 * cli-out.c: #include completer.h, readline/readline.h.
4218 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4219 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4220 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4221 * cli-out.h (cli_display_match_list): Declare.
4222 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4223 (ELLIPSIS_LEN): Ditto.
4224 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4225 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4226 (gdb_fnprint, gdb_print_filename): Ditto.
4227 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4228 (gdb_display_match_list): Ditto.
4229 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4230 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4231 (mld_beep_ftype, mld_read_key_ftype): Ditto.
4232 (match_list_displayer): New struct.
4233 (gdb_display_match_list): Declare.
4234 * top.c (init_main): Set rl_completion_display_matches_hook.
4235 * tui/tui-io.c: #include completer.h.
4236 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
4237 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
4238 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
4239 (tui_mld_getc, tui_mld_read_key): Ditto.
4240 (tui_rl_display_match_list): Rewrite.
4241 (tui_handle_resize_during_io): New arg for_completion. All callers
4244 2015-01-31 Doug Evans <xdje42@gmail.com>
4246 Add symbol lookup cache.
4247 * NEWS: Document new options and commands.
4248 * symtab.c (symbol_cache_key): New static global.
4249 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
4250 (SYMBOL_LOOKUP_FAILED): New macro.
4251 (symbol_cache_slot_state): New enum.
4252 (block_symbol_cache): New struct.
4253 (symbol_cache): New struct.
4254 (new_symbol_cache_size, symbol_cache_size): New static globals.
4255 (hash_symbol_entry, eq_symbol_entry): New functions.
4256 (symbol_cache_byte_size, resize_symbol_cache): New functions.
4257 (make_symbol_cache, free_symbol_cache): New functions.
4258 (get_symbol_cache, symbol_cache_cleanup): New function.
4259 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
4260 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
4261 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
4262 (symbol_cache_flush, symbol_cache_dump): New functions.
4263 (maintenance_print_symbol_cache): New function.
4264 (maintenance_flush_symbol_cache): New function.
4265 (symbol_cache_stats): New function.
4266 (maintenance_print_symbol_cache_statistics): New function.
4267 (symtab_new_objfile_observer): New function.
4268 (symtab_free_objfile_observer): New function.
4269 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
4270 (_initialize_symtab): Init symbol_cache_key. New parameter
4271 maint symbol-cache-size. New maint commands print symbol-cache,
4272 print symbol-cache-statistics, flush-symbol-cache.
4273 Install new_objfile, free_objfile observers.
4275 2015-01-31 Joel Brobecker <brobecker@adacore.com>
4278 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
4281 2015-01-31 Doug Evans <xdje42@gmail.com>
4283 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
4284 * auto-load.c: #include ctype.h.
4285 (struct auto_load_pspace_info): Replace member loaded_scripts with
4286 new members loaded_script_files, loaded_script_texts.
4287 (auto_load_pspace_data_cleanup): Update.
4288 (init_loaded_scripts_info): Update.
4289 (get_auto_load_pspace_data_for_loading): Update.
4290 (maybe_add_script_file): Renamed from maybe_add_script. All callers
4292 (maybe_add_script_text): New function.
4293 (clear_section_scripts): Update.
4294 (source_script_file, execute_script_contents): New functions.
4295 (source_section_scripts): Add support for
4296 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
4297 (print_scripts): New function.
4298 (auto_load_info_scripts): Also print inlined scripts.
4299 (maybe_print_unsupported_script_warning): Renamed from
4300 unsupported_script_warning_print. All callers updated.
4301 (maybe_print_script_not_found_warning): Renamed from
4302 script_not_found_warning_print. All callers updated.
4303 * extension-priv.h (struct extension_language_script_ops): New member
4304 objfile_script_executor.
4305 * extension.c (ext_lang_objfile_script_executor): New function.
4306 * extension.h (objfile_script_executor_func): New typedef.
4307 (ext_lang_objfile_script_executor): Declare.
4308 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
4309 * guile/guile.c (guile_extension_script_ops): Update.
4310 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
4311 * python/python.c (python_extension_script_ops): Update.
4312 (gdbpy_execute_objfile_script): New function.
4314 2015-01-31 Eli Zaretskii <eliz@gnu.org>
4316 * tui/tui-io.c (tui_expand_tabs): New function.
4317 (tui_puts, tui_redisplay_readline): Expand TABs into the
4318 appropriate number of spaces.
4319 * tui/tui-regs.c: Include tui-io.h.
4320 (tui_register_format): Call tui_expand_tabs to expand TABs into
4321 the appropriate number of spaces.
4322 * tui/tui-io.h: Add prototype for tui_expand_tabs.
4324 2015-01-30 Doug Evans <dje@google.com>
4326 * NEWS: "info source" command now display producer string if present.
4327 * source.c (source_info): Print producer string if present.
4329 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4331 * varobj.c (varobj_delete): Fix comment.
4333 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4335 * varobj.c (create_child): Modify comment.
4337 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4339 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
4341 (ada_name_of_variable): Same.
4342 (ada_path_expr_of_child): Same.
4343 (ada_value_of_variable): Same.
4344 (ada_value_is_changeable_p): Same.
4345 (ada_value_has_mutated): Same.
4346 * c-varobj.c (varobj_is_anonymous_child): Same.
4347 (c_is_path_expr_parent): Same.
4348 (c_number_of_children): Same.
4349 (c_name_of_variable): Same.
4350 (c_path_expr_of_child): Same.
4352 (c_value_of_variable): Same.
4353 (cplus_number_of_children): Same.
4354 (cplus_name_of_variable): Same.
4355 (cplus_path_expr_of_child): Same.
4356 (cplus_value_of_variable): Same.
4357 * jv-varobj.c (java_number_of_children): Same.
4358 (java_name_of_variable): Same.
4359 (java_path_expr_of_child): Same.
4360 (java_value_of_variable): Same.
4361 * varobj.c (number_of_children): Same.
4362 (name_of_variable): Same.
4364 (varobj_ensure_python_env): Same.
4365 (varobj_get_objname): Same.
4366 (varobj_get_expression): Same.
4367 (varobj_get_display_format): Same.
4368 (varobj_get_display_hint): Same.
4369 (varobj_has_more): Same.
4370 (varobj_get_thread_id): Same.
4371 (varobj_get_frozen): Same.
4372 (dynamic_varobj_has_child_method): Same.
4373 (varobj_get_gdb_type): Same.
4374 (is_path_expr_parent): Same.
4375 (varobj_default_is_path_expr_parent): Same.
4376 (varobj_get_language): Same.
4377 (varobj_get_attributes): Same.
4378 (varobj_is_dynamic_p): Same.
4379 (varobj_get_child_range): Same.
4380 (varobj_value_has_mutated): Same.
4381 (varobj_get_value_type): Same.
4382 (number_of_children): Same.
4383 (name_of_variable): Same.
4384 (check_scope): Same.
4385 (varobj_editable_p): Same.
4386 (varobj_value_is_changeable_p): Same.
4387 (varobj_floating_p): Same.
4388 (varobj_default_value_is_changeable_p): Same.
4390 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4392 * varobj.c (varobj_get_path_expr): Set var->path_expr.
4393 * c-varobj.c (c_path_expr_of_child): Set local var instead of
4395 (cplus_path_expr_of_child): Same.
4397 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4399 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
4401 (mi_cmd_var_info_expression): Same.
4402 * varobj.c (varobj_get_expression): Mention in the comment that
4403 the result must by freed by the caller.
4405 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4407 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
4409 (varobj_update_one): Same.
4410 * varobj.c (update_type_if_necessary): Free curr_type_str and
4412 (varobj_get_type): Specify in comment that the result needs to be
4413 freed by the caller.
4415 2015-01-29 Doug Evans <dje@google.com>
4418 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
4420 2015-01-25 Mark Wielaard <mjw@redhat.com>
4422 * dwarf2read.c (checkproducer): Call producer_is_gcc.
4423 * utils.c (producer_is_gcc_ge_4): Likewise.
4424 (producer_is_gcc): New function.
4425 * utils.h (producer_is_gcc): New declaration.
4427 2015-01-29 Joel Brobecker <brobecker@adacore.com>
4429 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
4431 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
4432 parameter by "addr_stack" parameter.
4433 (resolve_dynamic_range): Replace "addr" parameter by
4434 "stack_addr" parameter. Update function documentation.
4435 Update code accordingly.
4436 (resolve_dynamic_array, resolve_dynamic_union)
4437 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
4438 (resolve_dynamic_type): Update code, following the changes made
4439 to resolve_dynamic_type_internal's interface.
4440 * dwarf2loc.h (struct property_addr_info): New.
4441 (dwarf2_evaluate_property): Replace "address" parameter
4442 by "addr_stack" parameter. Adjust function documentation.
4443 (struct dwarf2_offset_baton): New.
4444 (struct dwarf2_property_baton): Update documentation of
4445 field "referenced_type" to be more general. New field
4446 "offset_info" in union data field.
4447 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
4448 parameter by "addr_stack" parameter. Adjust code accordingly.
4449 Add support for PROP_ADDR_OFFSET properties.
4450 * dwarf2read.c (attr_to_dynamic_prop): Add support for
4451 DW_AT_data_member_location attributes as well. Use case
4452 statements instead of if/else condition.
4454 2015-01-29 Joel Brobecker <brobecker@adacore.com>
4456 * ada-varobj.c (ada_varobj_get_array_number_of_children):
4457 Return zero if PARENT_VALUE is NULL and parent_type's
4458 range type is dynamic.
4460 2015-01-29 Joel Brobecker <brobecker@adacore.com>
4462 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
4463 nonzero if the type's subtype is dynamic.
4464 (resolve_dynamic_range): Also resolve the range's subtype.
4466 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
4468 Pushed by Joel Brobecker <brobecker@adacore.com>.
4469 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
4471 2015-01-27 Doug Evans <dje@google.com>
4473 * NEWS: Mention gdb.Objfile.username.
4474 * python/py-objfile.c (objfpy_get_username): New function.
4475 (objfile_getset): Add "username".
4477 2015-01-24 Mark Wielaard <mjw@redhat.com>
4479 * stack.c (return_command): Markup warning message with _.
4481 2015-01-24 Doug Evans <xdje42@gmail.com>
4483 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
4485 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
4487 Fix 100x slowdown regression on DWZ files.
4488 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
4489 (struct line_header): Add offset and offset_in_dwz.
4490 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
4491 (free_line_header_voidp): New declaration.
4492 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
4494 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
4495 (handle_DW_AT_stmt_list): Use line_header_hash.
4496 (free_line_header_voidp): New function.
4497 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
4498 (dwarf_decode_lines): New parameter decode_mapping, use it.
4499 (dwarf2_free_objfile): Free line_header_hash.
4501 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
4504 * valops.c (value_rtti_indirect_type): Catch exception thrown by
4507 2015-01-15 Mark Wielaard <mjw@redhat.com>
4509 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
4511 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
4512 calling_convention an 8 bit bit field.
4513 (TYPE_NO_RETURN): New macro.
4514 * infcmd.c (finish_command): Query if function does not return
4516 * stack.c (return_command): Likewise.
4518 2015-01-23 Pedro Alves <palves@redhat.com>
4520 * linux-nat.c (linux_is_async_p): New macro.
4521 (linux_nat_is_async_p):
4522 (linux_nat_terminal_inferior): Check whether the target can async
4523 instead of whether it is already async.
4524 (linux_nat_terminal_ours): Don't check whether the target is
4526 (linux_async_pipe): Use linux_is_async_p.
4528 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4530 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
4532 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
4533 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
4534 Sort tp_array using tp_array_compar.
4535 (_initialize_thread): Extend thread_apply_all_command help.
4537 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4539 * corelow.c (core_open): Call also thread_command.
4540 * gdbthread.h (thread_command): New prototype moved from ...
4541 * thread.c (thread_command): ... here.
4542 (thread_command): Make it global.
4544 2015-01-22 Pedro Alves <palves@redhat.com>
4546 * configure.ac [*mingw32*]: Check $curses_found instead of
4548 * configure: Regenerate.
4549 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
4550 HAVE_NCURSES_NCURSES_H checks.
4552 2015-01-22 Eli Zaretskii <eliz@gnu.org>
4554 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
4555 fails with the 1st arg NULL, try again with "unknown". Don't test
4556 the "cup" capability: it isn't supported by the Windows port of
4557 ncurses, but the Windows console driver is still capable of
4560 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4562 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
4564 2015-01-22 Eli Zaretskii <eliz@gnu.org>
4566 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
4567 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
4568 reason that "make TAGS" is broken.
4570 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
4572 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
4573 and check additional store instructions.
4575 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
4577 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
4579 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
4581 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
4582 ppc_canonicalize_syscall, ppc_linux_syscall_record,
4583 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
4584 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
4585 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
4586 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
4587 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
4588 ppc_process_record_op19, ppc_process_record_op31,
4589 ppc_process_record_op59, ppc_process_record_op60,
4590 ppc_process_record_op63): Likewise.
4592 2015-01-20 Joel Brobecker <brobecker@adacore.com>
4594 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
4595 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
4598 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
4600 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
4601 ppc_process_record_op31, ppc_process_record_op59,
4602 ppc_process_record_op60, ppc_process_record_op63,
4603 ppc_process_record): Fix -Wformat warning.
4604 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
4605 Remove unused variables.
4607 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
4609 * MAINTAINERS (Write After Approval): Add "Chen Gang".
4611 2015-01-19 Eli Zaretskii <eliz@gnu.org>
4613 * configure.ac [*mingw32*]: Only add windows-termcap.o to
4614 CONFIG_OBS if not building with a curses library.
4615 * configure: Regenerate.
4617 * windows-termcap.c: Include defs.h. Make the whole body empty if
4618 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
4619 HAVE_NCURSES_NCURSES_H is defined.
4621 2015-01-19 Joel Brobecker <brobecker@adacore.com>
4623 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
4624 from end of line to start of next line.
4626 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
4628 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
4629 Scan PLT stub backward for reverse debugging.
4630 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
4632 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
4633 Ulrich Weigand <uweigand@de.ibm.com>
4635 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
4637 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
4639 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
4640 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
4641 (ppc_linux_init_abi): Set process_record, process_record_signal.
4642 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
4643 ppc_linux_record_tdep to gdbarch_tdep.
4644 (ppc_process_record): New declaration.
4645 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
4646 ppc_process_record_op19, ppc_process_record_op31,
4647 ppc_process_record_op59, ppc_process_record_op60,
4648 ppc_process_record_op63, ppc_process_record): New functions.
4650 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
4652 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
4653 rs6000_in_function_epilogue_frame_p and add an argument
4655 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
4656 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
4658 (rs6000_epilogue_frame_unwind): New.
4659 (rs6000_gdbarch_init): Append epilogue unwinder.
4661 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
4663 * nat/linux-personality.c: Replace "#ifndef
4664 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
4665 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
4668 2015-01-16 Eli Zaretskii <eliz@gnu.org>
4670 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
4672 (_initialize_tui_win) <border-kind, border-mode>:
4673 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
4674 (tui_set_tab_width_command): Fix the commentary.
4676 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
4678 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
4680 (tui_set_tab_width_command): Delete and recreate the source and
4681 the disassembly windows, to show the effect of the changed tab
4684 * tui/tui-data.h (LINE_PREFIX): Make shorter
4685 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
4686 "Thread NNNNN.XXXX" thread ID notation on Windows.
4688 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4690 Fix gcc-5 compilation.
4691 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
4693 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
4695 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
4696 (linux-personality.o): New rule.
4697 * common/common-defs.h: Include <stdint.h>.
4698 * config/aarch64/linux.mh (NATDEPFILES): Include
4699 linux-personality.o.
4700 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
4701 * config/arm/linux.mh (NATDEPFILES): Likewise.
4702 * config/i386/linux64.mh (NATDEPFILES): Likewise.
4703 * config/i386/linux.mh (NATDEPFILES): Likewise.
4704 * config/ia64/linux.mh (NATDEPFILES): Likewise.
4705 * config/m32r/linux.mh (NATDEPFILES): Likewise.
4706 * config/m68k/linux.mh (NATDEPFILES): Likewise.
4707 * config/mips/linux.mh (NATDEPFILES): Likewise.
4708 * config/pa/linux.mh (NATDEPFILES): Likewise.
4709 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
4710 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
4711 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
4712 * config/s390/linux.mh (NATDEPFILES): Likewise.
4713 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
4714 * config/sparc/linux.mh (NATDEPFILES): Likewise.
4715 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
4716 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
4717 * defs.h: Remove #include <stdint.h> (moved to
4718 common/common-defs.h).
4719 * linux-nat.c: Include nat/linux-personality.h. Remove #include
4720 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
4721 nat/linux-personality.c).
4722 (linux_nat_create_inferior): Remove code to disable address space
4723 randomization (moved to nat/linux-personality.c). Create cleanup
4724 to disable address space randomization.
4725 * nat/linux-personality.c: New file.
4726 * nat/linux-personality.h: Likewise.
4728 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
4730 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
4731 common/posix-strerror.c.
4732 (posix-strerror.o): New rule.
4733 (mingw-strerror.o): Likewise.
4734 * common/common-utils.h (safe_strerror): Move prototype to here,
4736 * common/common.host: New file.
4737 * common/mingw-strerror.c: Likewise.
4738 * common/posix-strerror.c: Likewise.
4739 * configure: Regenerated.
4740 * configure.ac: Source common/common.host. Add variable
4741 common_host_obs to gdb_host_obs.
4742 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
4743 gdb/common/posix-strerror.c when warning about the use of
4745 * mingw-hdep.c (safe_strerror): Remove definition; move it to
4746 common/mingw-strerror.c.
4747 * posix-hdep.c (safe_strerror): Remove definition; move it to
4748 common/posix-hdep.c.
4749 * utils.h (safe_strerror): Remove prototype; move to
4750 common/common-utils.h.
4752 2015-01-15 Joel Brobecker <brobecker@adacore.com>
4756 2015-01-15 Joel Brobecker <brobecker@adacore.com>
4758 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
4759 ___XA type if the array has already been fixed.
4761 2015-01-14 Yao Qi <yao@codesourcery.com>
4763 * Makefile.in (ppc-linux.o): New rule.
4764 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
4765 * configure.ac: AC_CHECK_FUNCS(getauxval).
4766 * config.in: Re-generated.
4767 * configure: Re-generated.
4768 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
4770 * nat/ppc-linux.c: New file.
4771 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
4772 Call ppc64_64bit_inferior_p.
4774 2015-01-14 Yao Qi <yao@codesourcery.com>
4776 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
4778 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
4779 (PPC_FEATURE_HAS_DFP): Likewise.
4780 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
4781 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
4782 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
4783 Include "nat/ppc-linux.h".
4784 * nat/ppc-linux.h: New file.
4785 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
4787 2015-01-14 Pedro Alves <palves@redhat.com>
4790 * breakpoint.c: Include "interps.h".
4791 (bpstat_do_actions_1): Also check whether the interpreter is
4794 2015-01-14 Pedro Alves <palves@redhat.com>
4797 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
4798 reinstall if the interpreter is sync.
4800 2015-01-13 Doug Evans <dje@google.com>
4802 * objfiles.c (objfile_filename): New function.
4803 * objfiles.h (objfile_filename): Declare it.
4804 (objfile_name): Add function comment.
4805 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
4806 bfd file name (which may be realpath'd), and the original name.
4808 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4810 * NEWS: Create a new section for the next release branch.
4811 Rename the section of the current branch, now that it has
4814 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4816 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
4817 * version.in: Bump version to 7.9.50.DATE-cvs.
4819 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4821 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
4822 Remove trailing new-line in argument of call to warning.
4824 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4826 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
4827 new-line in argument of call to "warning".
4829 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4831 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
4832 in static block, then try searching for primitive types.
4834 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
4836 * top.h (gdb_add_history): Declare.
4837 * top.c (command_count): New variable.
4838 (gdb_add_history): New function.
4839 (gdb_safe_append_history): New static function.
4840 (quit_force): Call it.
4841 (command_line_input): Use gdb_add_history instead of
4843 * event-top.c (command_line_handler): Likewise.
4845 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
4848 * darwin-nat.c: Replace <machine/setjmp.h> #include by
4849 <setjmp.h> #include.
4851 2015-01-11 Doug Evans <xdje42@gmail.com>
4853 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
4855 2015-01-11 Doug Evans <xdje42@gmail.com>
4858 * NEWS: The "maint demangle" command is renamed as "demangle".
4859 * demangle.c: #include cli/cli-utils.h, language.h.
4860 (demangle_command): New function.
4861 (_initialize_demangle): Add new command "demangle".
4862 * maint.c (maintenance_demangle): Stub out.
4863 (_initialize_maint_cmds): Update help text for "maint demangle",
4864 and mark as deprecated.
4866 2015-01-11 Mark Kettenis <kettenis@gnu.org>
4868 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
4869 inferior_thread is a function.
4871 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
4873 * Makefile.in (.y.c): Don't munge yacc's #line
4876 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
4878 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
4879 to prompt for input.
4880 * tui/tui-hooks.c (tui_query_hook): Remove.
4881 (tui_install_hooks): Don't set deprecated_query_hook.
4882 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
4883 height calculation. Always update the command window's cur_line.
4885 2015-01-09 Pedro Alves <palves@redhat.com>
4887 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
4889 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
4891 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
4892 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
4894 (check_stopped_by_watchpoint): New function.
4895 (save_sigtrap): Reimplement.
4896 (linux_nat_stopped_by_watchpoint): Adjust.
4897 (linux_nat_lp_status_is_event): Delete.
4898 (stop_wait_callback): Only call save_sigtrap after storing the
4900 (status_callback): If the thread had been stopped for a breakpoint
4901 that has since been removed, discard the event and resume the LWP.
4902 (count_events_callback, select_event_lwp_callback): Use
4903 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
4904 (cancel_breakpoint): Rename to ...
4905 (check_stopped_by_breakpoint): ... this. Record whether the LWP
4906 stopped for a software breakpoint or hardware breakpoint.
4907 (select_event_lwp): Only give preference to the stepping LWP in
4908 all-stop mode. Adjust comments.
4909 (stop_and_resume_callback): Remove references to new_pending_p.
4910 (linux_nat_filter_event): Likewise. Leave exit events of the
4911 leader thread pending here. Handle signal short circuiting here.
4912 Only call save_sigtrap after storing the pending waitstatus.
4913 (linux_nat_wait_1): Remove 'retry' label. Remove references to
4914 new_pending. Don't handle leaving events the caller is not
4915 interested in pending here, nor handle signal short-circuiting
4916 here. Also give equal priority to all LWPs that have had events
4917 in non-stop mode. If reporting a software breakpoint event,
4918 unadjust the LWP's PC.
4919 * linux-nat.h (enum lwp_stop_reason): New.
4920 (struct lwp_info) <stop_pc>: New field.
4921 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
4922 (struct lwp_info) <stop_reason>: New field.
4923 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4925 2015-01-09 Pedro Alves <palves@redhat.com>
4927 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
4928 Set the LWP's 'resumed' flag.
4930 2015-01-09 Pedro Alves <palves@redhat.com>
4932 * linux-nat.c (linux_resume_one_lwp): New function.
4933 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
4934 (linux_nat_resume): Use lwp_status_pending_p and
4935 linux_resume_one_lwp.
4936 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
4937 (linux_handle_extended_wait): Use linux_resume_one_lwp.
4938 (status_callback, running_callback): Use lwp_status_pending_p.
4939 (lwp_status_pending_p): New function.
4940 (stop_and_resume_callback): Use lwp_status_pending_p.
4941 (linux_nat_filter_event): Use linux_resume_one_lwp.
4942 (linux_nat_wait_1): Always use status_callback to look for an LWP
4943 with a pending status. Use linux_resume_one_lwp.
4944 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
4945 linux_resume_one_lwp.
4947 2015-01-09 Pedro Alves <palves@redhat.com>
4949 * breakpoint.c (bp_location_inserted_here_p): New function,
4950 factored out from ...
4951 (breakpoint_inserted_here_p): ... here. Use
4952 ALL_BP_LOCATIONS_AT_ADDR.
4953 (software_breakpoint_inserted_here_p): Use
4954 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
4956 2014-01-09 Pedro Alves <palves@redhat.com>
4958 Skip enabling event reporting if the kernel supports
4960 * linux-thread-db.c: Include "nat/linux-ptrace.h".
4961 (thread_db_use_events): New function.
4962 (try_thread_db_load_1): Check thread_db_use_events before enabling
4964 (update_thread_state): New function.
4965 (attach_thread): Use it. Check thread_db_use_events before
4966 enabling event reporting.
4967 (thread_db_detach): Check thread_db_use_events before disabling
4969 (find_new_threads_callback): Check thread_db_use_events before
4970 enabling event reporting. Update the thread's state if not using
4971 libthread_db events.
4973 2015-01-09 Pedro Alves <palves@redhat.com>
4975 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
4976 about to wait for is > 0.
4977 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
4978 the kernel thread ID is -1.
4980 2015-01-09 Pedro Alves <palves@redhat.com>
4982 * linux-nat.c (attach_proc_task_lwp_callback): New function.
4983 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
4984 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
4985 ptrace option flags.
4986 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
4988 * nat/linux-procfs.c: Include <dirent.h>.
4989 (linux_proc_get_int): New parameter "warn". Handle it.
4990 (linux_proc_get_tgid): Adjust.
4991 (linux_proc_get_tracerpid): Rename to ...
4992 (linux_proc_get_tracerpid_nowarn): ... this.
4993 (linux_proc_pid_get_state): New function, factored out from
4994 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
4996 (linux_proc_pid_is_gone): New function.
4997 (linux_proc_pid_is_stopped): Adjust.
4998 (linux_proc_pid_is_zombie_maybe_warn)
4999 (linux_proc_pid_is_zombie_nowarn): New functions.
5000 (linux_proc_pid_is_zombie): Use
5001 linux_proc_pid_is_zombie_maybe_warn.
5002 (linux_proc_attach_tgid_threads): New function.
5003 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5004 (linux_proc_get_tracerpid): Rename to ...
5005 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5006 (linux_proc_pid_is_gone): New declaration.
5007 (linux_proc_pid_is_zombie): Update comment.
5008 (linux_proc_pid_is_zombie_nowarn): New declaration.
5009 (linux_proc_attach_lwp_func): New typedef.
5010 (linux_proc_attach_tgid_threads): New declaration.
5011 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5012 use nowarn functions.
5013 (linux_ptrace_attach_fail_reason_string): Move here from
5014 gdbserver/linux-low.c and rename.
5015 (ptrace_supports_feature): If the current ptrace options are not
5016 known yet, check them now, instead of asserting.
5017 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5020 2015-01-09 Pedro Alves <palves@redhat.com>
5022 * linux-thread-db.c (thread_db_find_new_threads_silently)
5023 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5024 (find_new_threads_once): Print debug output on gdb_stdlog.
5026 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
5027 Pedro Alves <palves@redhat.com>
5029 * compile/compile.c: Include "gdb_wait.h".
5030 (do_rmdir): Check return value, and free 'zap'.
5032 2015-01-08 Pedro Alves <palves@redhat.com>
5033 Yao Qi <yao@codesourcery.com>
5035 * dwarf2loc.c (indirect_pieced_value): Don't call
5036 gdb_sign_extend. Call extract_signed_integer instead.
5037 * utils.c (gdb_sign_extend): Remove.
5038 * utils.h (gdb_sign_extend): Remove declaration.
5040 2015-01-07 Pierre Muller <muller@sourceware.org>
5043 * stabsread.c (define_symbol): Set language for C++ special symbols.
5045 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5047 * inflow.c (initial_gdb_ttystate): Tweak comment.
5049 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5051 * inflow.c (set_initial_gdb_ttystate): Add empty line after
5052 comment documenting function.
5054 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5056 * terminal.h (set_initial_gdb_ttystate): Declare.
5057 * inflow.c (initial_gdb_ttystate): New static variable.
5058 (set_initial_gdb_ttystate): New setter.
5059 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5060 instead of our current terminal state.
5061 * top.c (gdb_init): Call set_initial_gdb_ttystate.
5063 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5065 * guile/scm-type.c (tyscm_array_1): Add comment.
5066 * python/py-type.c (typy_array_1): Add comment.
5068 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5070 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5071 error if N2 is equal to N1 - 1.
5073 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5075 * python/py-type.c (typy_array_1): Do not raise negative-length
5076 exception if N2 is equal to N1 - 1.
5078 2015-01-03 Doug Evans <xdje42@gmail.com>
5080 * c-exp.y: Whitespace cleanup.
5081 (classify_inner_name): Remove extra ;.
5083 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
5085 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5088 2015-01-02 Doug Evans <dje@google.com>
5090 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5092 2015-01-02 Doug Evans <dje@google.com>
5094 * symtab.h (struct symbol): Fix typo in comment.
5096 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5098 Update year range in copyright notice of all files.
5100 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5102 * top.c (print_gdb_version): Update copyright year to 2015.
5104 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5106 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5108 For older changes see ChangeLog-2014.
5114 version-control: never