1 Wed Feb 23 10:39:18 1994 Jim Kingdon (kingdon@rtl.cygnus.com)
3 * dbxread.c (process_one_symbol): Set
4 block_address_function_relative for COFF like we do for ELF and SOM.
6 Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
8 * mdebugread.c (new_psymtab): Pass in section_offsets and set
10 * mdebugread.c (handle_psymbol_enumerators): New function to enter
11 the enumerators of an ecoff enum into the partial symbol table.
12 * mdebugread.c (parse_partial_symbols): Call it.
13 * symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
14 * symmisc.c (dump_psymtab): Fix typo, clean up output of section
15 offsets. Cast psymtab->read_symtab to PTR before passing it to
17 * i386-tdep.c (i386_skip_prologue): Skip over instructions that
18 set up the global offset table pointer in pic compiled code.
19 * config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
20 error() on TYPE_CODE_FLT arguments whose size is greater than 8,
21 swap all other TYPE_CODE_FLT arguments as mips_push_arguments
22 ensures that floats are promoted to doubles before they are pushed
25 Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com)
27 * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
28 Fixup cache_on and flush_i_cache so that they work for both the
29 930 and 932 processors. Rewrite most low level funcs (uart
30 access & cache stuff) to use new ASI access macros in sparclite.h.
31 Also make it easy to access second serial port.
33 Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
35 * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
36 <sys/stat.h>; not needed.
38 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
40 * stack.c (print_frame_info): In "pathological" case, don't
41 distrust the line number information.
43 Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com)
45 * mips-tdep.c (mips_print_register): handle 64 bits register.
46 * valprint.c (print_longest): fix a bug in printing 64 bits value.
48 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
52 * Makefile.in (install): Do the sed for program_transform_name
53 ourselves instead of worrying about INSTALL_XFORM. This enables
54 users to override INSTALL_PROGRAM in the standard way.
56 * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
57 depend on Makefile.in.
59 * defs.h, valprint.c: Make longest_to_int a function not a macro.
60 Only test against INT_MIN if a LONGEST is bigger than an int.
62 * README: Change GhostScript to Ghostscript.
64 Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com)
66 * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
67 Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
69 * Makefile.in (ALLPARAM): Add these files.
71 * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
73 * Makefile.in: Add Kung's new mips64 files.
75 Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com)
77 * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
78 mips64el-*-ecoff and mips64-big-*.
79 * defs.h: get rid of FORCE_LONG_LONG.
80 * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
81 parsing. Change register size to be MIPS_REGSIZE.
83 Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com)
85 * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,
86 osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c,
87 xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
89 Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
91 * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
92 (remove_commands, add_commands): Add/remove hms-drain when target
95 Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com)
97 * configure.in: Add Lynx/rs6000 support.
98 * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
99 messages. Add rs6000 support. Don't try to modify unwritable
101 * rs6000-nat.c: Move lots of native dependent stuff (like core
102 file support) from rs6000-tdep.c & xcoffexec.c to here.
103 * rs6000-tdep.c: Move native dependent stuff to nat.c.
104 * xcoffexec.c: Move native dependent stuff to nat.c.
105 * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
107 * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
109 * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
110 New files to support Lynx/rs6000.
112 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
114 * README: Remove note about gcc warnings on alpha, these should be
116 * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
117 m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
118 remote-utils.c, stabsread.c: Include <string.h>.
119 * regex.c: Include "defs.h", change re_comp argument to const char *.
120 * infptrace.c (fetch_register, store_inferior_registers): Change
121 regaddr to type CORE_ADDR.
122 * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
123 Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
125 Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
127 * symtab.h: Always define BYTE_BITFIELD to nothing.
129 Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
131 * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
132 * configure.in: Remove comment about m68k-em.mt.
133 * Makefile.in: Remove references.
135 Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
137 * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
140 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
142 * target.c (target_preopen): If target_kill doesn't remove the
143 target from the stack, use pop_target to do it.
145 * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
146 of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
147 changes to stabsread.c from summer 1993.
149 * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
150 printing the program, rather than passing NULL to printf.
151 (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
152 try to call UDIDisconnect again. Print better message.
153 (udi_kill): Just call UDIDisconnect ourselves, rather than doing
155 (udi_create_inferior): If udi_session_id is negative, open a new
156 TIP rather than giving an error.
158 * config/mips/mipsm3.mh, config/i386/i386m3.mh,
159 config/ns32k/ns32km3.mh: Define NAT_FILE.
160 * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
161 (it was inconsistent and namespace-wrong) to NM_M3_H.
162 * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
163 (m3_open): New function.
165 * TODO: Update Mach section.
167 * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
169 Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
171 * printcmd.c (printf_command): Add missing single-letter
172 backslash-escape sequences, and improve error message.
174 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
176 * corelow.c (solib_add_stub, core_open): Pass address of from_tty
177 rather than trying to shove an int into a pointer and back out
178 again. This avoids compiler warnings.
180 * defs.h (alloca): Declare as void *, not char *, on hpux.
181 Don't prototype it, just declare the return type.
183 Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
185 * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
186 (REGISTER_CONVERT_TO_RAW): Add missing backslash.
188 Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
190 * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
191 ZERO_REGNUM, just read it as zero without talking to the board.
193 * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
195 * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
196 to store_floating, not nonexistent variable len.
198 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
200 (mips_store_word): Change calling convention to return errors, and
201 to provide old contents if the caller wants it.
202 (mips_xfer_memory): Deal with errors from mips_store_word.
203 * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
204 define now that remote-mips.c doesn't use BREAKPOINT.
206 * remote-mips.c (mips_create_inferior): Call warning if arguments
207 specified, and then execute "set args" command. Call error, not
208 mips_error, if executable file not specified.
210 * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
213 * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
216 Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
218 * value.h (print_longest): Rename "value" to "val" in prototype
219 declaration because some compilers don't like arguments whose
220 names are the same as types.
221 * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
222 before passing it to remote_*_bytes.
224 Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
226 * h8500-tdep.c (saved_pc_after_call): The size of the
227 pc is memory model dependent. (segmented_command,
228 unsegmented_command, _initialize_h8500_tdep): New commands to
230 * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
232 * remote-hms.c (hms_load): Remove breakpoints when loaded.
233 (hms_wait): Use new status structure
234 (hms_open): Push the target here. (hms_before_main_loop): Not
235 here. (supply_val, hms_fetch_register, hms_store_register): Cope
236 with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
237 * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
238 all registers in a compact way.
240 Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
242 * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
243 as CORE_ADDR to match definition in rs6000-tdep.c.
245 Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
247 * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
248 * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
249 definitions into the psymtab.
251 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
253 * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
254 a special exceptionSize for the 68332.
256 * remote-udi.c (udi_attach): If no arguments, print error.
258 Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
260 * Makefile.in (VERSION): Bump to 4.12.1
261 * NEWS, README: Update to match 4.12 release.
263 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
265 * command.c (empty_sfunc): New function.
266 (add_set_cmd): Use it instead of not_just_help_class_command.
267 (not_just_help_class_command): Change calling convention back to
268 what it was before yesterday's change.
270 * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
271 of the type if present.
273 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
275 * printcmd.c (decode_format): Don't blithely set the size for
276 an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
278 * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
279 If BFD64, make a LONGEST a BFD_HOST_64_BIT.
280 * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
281 always just check against INT_MIN and INT_MAX (this also fixes things
282 if sizeof (long) > sizeof (int), e.g. Alpha).
283 * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
284 Don't define LONGEST or BUILTIN_TYPE_LONGEST.
285 * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
286 BUILTIN_TYPE_UNSIGNED_LONGEST.
287 * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
288 longest_int and longest_unsigned_int.
289 * value.h (struct value): Just align to LONGEST, rather than worrying
290 about CC_HAS_LONG_LONG.
291 * valarith.c (value_binop): Figure out type ourself based on
292 sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
293 point is that we don't depend on CC_HAS_LONG_LONG anymore.
294 * valprint.c (val_print_type_code_int): Just call
295 extract_unsigned_integer directly, rather than going through
297 * printcmd.c (decode_format): Remove code which would sometimes
298 change 'g' size to 'w' for integers. print_scalar_formatted handles
299 printing huge integers well enough, thank you.
301 * command.c (add_set_cmd, not_just_help_class_command): Change
302 to make this the sfunc, not cfunc, since that is how we call it.
303 * command.h: Comment difference between sfunc and cfunc.
304 * demangle.c (set_demangling_command): Add third arg since that
306 (_initialize_demangler): Use sfunc, not cfunc, for
307 set_demangling_command, since that is how it is called.
308 Remove show_demangling_command; it has no effect.
310 * command.c (shell_escape): Report errors correctly (with error
311 message from strerror).
313 Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
315 * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
316 x_scnlen.l rather than x_scnlen to match corresponding change in
319 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
321 * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
322 Change comments regarding TYPE_CODE_BOOL.
323 * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
324 regardless of the language.
325 (value_true): Just call value_logical_not regardless of language.
326 * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
327 Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
328 * language.h: Improve comment for la_builtin_type_vector.
329 * m2-lang.c (_initialize_m2_language): Don't add any fields to
330 builtin_type_m2_bool.
332 Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
334 * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
335 Define IN_SIGTRAMP and backtrace correctly through signal handlers.
337 Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
339 * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
340 by restarting the ioctl.
342 Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
344 * target.h (target_wait): Add comment about calling
347 Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
349 * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
350 additional arguments.
351 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
353 Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
355 * sparc-stub.c: Remove unnecessary #include of memory.h.
357 Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
359 * mips-tdep.c: Remove code which sets saved_regs from
360 init_extra_frame_info and put it in new function mips_find_saved_regs.
361 (READ_FRAME_REG): Remove macro and replace uses with the expansion.
362 * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
363 check if it is NULL and call mips_find_saved_regs if so.
365 * remote-mips.c: Use unfiltered, not filtered, output most places.
367 * blockframe.c (get_prev_frame_info): Detect and stop an infinite
368 backtrace. Revise comments.
370 Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
372 * mdebugread.c (parse_procedure): Remove _sigtramp kludges for
373 alpha and irix. The _sigtramp case has to be handled properly
374 in the tdep files if we have no ecoff debugging info.
375 * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
376 mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
377 without PC_REGNUM kludge.
378 * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
379 Clean up handling of mips sigtramp frames, improve comments.
381 Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
383 * paread.c (read_unwind_info): Fix typo.
385 * paread.c (pa_symtab_read): Update the "check_strange_names"
386 filter to match GCC's current output. Filter out section symbols
387 (which the HP linker sometimes puts in the wrong place).
389 Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
391 * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
393 * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
395 * Makefile.in: Remove all references to sparcly-nat.c.
397 * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
398 remote-sim.h directly, rather than via $(remote_utils_h). This avoids
399 duplicating serial.h and target.h.
401 * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
402 are not used anywhere (a 5 Oct 1993 change removed the uses).
404 * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
405 * config/m68k/es1800.mt: Add comment.
406 * remote-es.c: Extensive changes to update to current conventions.
408 * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
409 If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
410 to achieve the desired timeout.
411 * serial.h (serial_t): Add field timeout_remaining.
413 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
415 * c-exp.y (yylex): Reenable nested type code.
417 Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
419 * a29k-tdep.c (examine_tag): Add comment regarding argcount.
421 * remote-mips.c (mips_ops): Fix docstring.
423 * remote-bug.c (bug_ops): Remove spurious newline from docstring.
425 * config/m68k/tm-monitor.h: Changes to bring this into accordance
426 with the old tm-m68k-em.h:
427 (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
428 (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
429 (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
430 Add FIXME regarding GET_LONGJMP_TARGET.
432 * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
433 * infptrace.c (kill_inferior): Add comments.
434 * main.c (quit_command): Call target_close after we kill or
436 * remote-udi.c (udi_close): Don't error() if QUITTING.
438 Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
440 * configure.in: Make m68k-coff and aout add monitor support in
441 addition to the standard serial support.
443 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
445 * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
448 Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
450 * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
451 * elfread.c (record_minimal_symbol_and_info),
452 dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
454 Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
456 * i386-stub.c: Add ".text" right before "mem_fault:".
458 * main.c (baud_rate): Add FIXME comment about printing -1 value.
460 * remote-utils.c (usage): Fix message to be accurate and conform
461 more closely to normal conventions.
463 * remote-utils.c (gr_files_info): Have the exec_bfd test control
464 whether to show information about exec_bfd, and not control whether
465 to show information about device and speed.
467 * remote-utils.c (gr_open): If sr_get_device returns NULL, give
468 usage message, don't dump core.
470 * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
471 for variable size array.
472 (bug_fetch_register, bug_store_register): Rename "value" to
473 "fpreg_buf" because some compilers don't like variables whose
474 names are the same as types.
475 (bug_store_register): Use a cast when converting char * to
478 * symmisc.c (maintenance_print_symbols): Don't refer to the name
479 of the command in error message (the text was referring to the old
480 name of the command).
482 * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
484 * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
485 full details on structure elements without names. This partially
486 reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
487 of those changes was accidental.
489 * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
490 defined, make it an error to specify a single argument which is not
493 * Makefile.in (version.c), main.c (print_gdb_version): Use
494 host_alias and target_alias, not host_canonical and
495 target_canonical, to print configuration.
497 Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
499 * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
500 of builtin_type_long. It is necessary to get a type which is
501 TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
503 Fix many sins which will come up in 32 bit x 64 bit GDB, and
504 various miscellaneous things discovered in the process:
505 * printcmd.c, defs.h (print_address_numeric): New function.
506 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
507 breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
508 cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
509 printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
511 * utils.c, defs.h (gdb_print_address): New function.
512 * expprint (dump_expression), gdbtypes.h: Use it.
513 * breakpoint.c (describe_other_breakpoints),
514 symmisc.c (dump_symtab, print_symbol):
515 Use filtered not unfiltered I/O.
516 (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
517 just run gdb under a debugger for this (and it had problems with
518 printing addresses, how to print b->shadow, etc.).
519 * buildsym.c (make_blockvector), core.c (memory_error),
520 exec.c (print_section_info), maint.c (print_section_table),
521 mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
522 symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
523 Add comments saying code is broken. Marked with "FIXME-32x64".
524 * dbxread.c (process_one_symbol), partial-stab.h (default),
525 remote-vx.c (vx_run_files_info):
526 Don't cast int being passed to local_hex_string.
527 * symmisc.c (print_symbol): Don't cast long being passed to %lx.
528 * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
530 * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
532 * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
533 * source.c: Include <sys/types.h> regardless of USG.
535 Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
537 * valops.c (value_assign): Set `type' after coercing toval.
538 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
539 Use extract_unsigned_integer to get the address of a reference.
541 Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
543 * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
544 AIX can use ? instead of \ for continuation. Deal with it.
546 * paread.c (read_unwind_info): Just assign to objfile->obj_private,
547 not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
548 the HP compiler in ANSI mode doesn't like.
550 * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
551 based on USG, rather than defining HAVE_SIGSETMASK to an
552 expression containing defined. Having a macro used in #if expand
553 to an expression containing "defined" is undefined according to
554 ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
557 Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
559 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
560 Clean up the changes of 11 Jan, as recommended by Peter Schauer.
562 Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
564 * ch-exp.y (match_string_literal): Allow a zero-length string.
565 * ch-lang.c (chill_printstr): Don't print zero-length string funny.
567 Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
569 * i386aix-nat.c (i386_float_info): Reverse order of registers before
570 passing them to print_387_status.
571 (print_387_status): Don't subtract top from 7 before using it.
572 * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
573 from 7; the above explains it.
575 Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
577 * mips-tdep.c (init_extra_frame_info): Use frame relative stack
578 pointer value when fixing up the frame at the start of a function.
580 Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
582 * lynx-nat.c (fetch_core_registers): Load the I & L regs for the
583 Sparc from the stack.
585 Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
587 * remote-mips.c (mips_initialize): Clear mips_initializing via
588 cleanup chain, not directly.
590 * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
591 of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are
592 munging the timeout due to the limited range of c_cc[VTIME].
594 * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
595 * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
596 m3-nat.c (m3_create_inferior): Pass it.
597 * procfs.c: Remove ptrace function. It was declared in a way which
598 conflicted with the prototype in unistd.h on Solaris.
600 Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
602 * sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc
603 in the sigcontext if it is a signal trampoline frame.
604 * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
607 Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com)
609 * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
610 config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to
611 tm-sparc.h so they can be overridden if necessary.
613 Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com)
615 * lynx-nat.c: Add Sparc support.
616 * sparcly-nat.c: Remove. It's useless.
617 * config/sparc/nm-sparclynx.h: Rewrite.
618 * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o
620 * config/sparc/tm-sparclynx.h: Rewrite.
622 Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
624 * rs6000-pinsn.c: Use the new disassembler in the opcodes
625 directory. Old code was discarded, since the new opcode table has
628 Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com)
630 * Makefile.in (realclean): Remove info files per make-stds.texi.
632 Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
634 * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
635 if N_SO_ADDRESS_MAYBE_MISSING is defined.
636 * config/sparc/tm-sun4sol2.h: Define it.
638 Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
640 * printcmd.c (print_address_symbolic): Unconditionally use msymbol
641 if we did not find a symbol.
643 Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
645 * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
648 * hppab-nat.c (call_ptrace): Delete redundant function.
649 (kill_inferior, attach, detach, child_resume): Likewise.
650 (child_xfer_memory): Likewise.
652 * hppah-nat.c (call_ptrace): Delete redundant function.
653 (kill_inferior, attach, detach, child_resume): Likewise.
655 * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
657 * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
659 * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
661 * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
662 (CHILD_XFER_MEMORY): Define.
663 (PT_*): Define so that generic infptrace.c code can be used.
665 Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
667 * xcoffread.c (xcoff_symfile_read): Make second parameter a
668 struct section_offsets *, not a (nonexistent) struct section_offset *.
670 * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
671 internal_xcoff_symtab, not an array of one of them. Change lots of
672 "main_aux" to "&main_aux" and so on.
674 * coffread.c, xcoffread.c: Include <coff/internal.h>
677 Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
679 * coffread.c (coff_getfilename): Make it not static.
681 * xcoffread.c (read_xcoff_symtab): complain() not abort().
683 * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
684 a completely gratuitous difference between xcoffread.c and coffread.c).
686 Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
688 * infrun.c (wait_for_inferior): Don't set frame for
689 step_resume_breakpoint for IN_SIGTRAMP cases.
691 * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
692 breakpoint.c (bpstat_what): Move step_resume from its own field of
693 the struct bpstat_what into the main_action. Make it override
694 other breakpoints. This is a conservative change in the sense
695 that before the step resume breakpoint was a breakpoint.c
696 breakpoint, hitting the step resume breakpoint overrode even
697 calling bpstat_stop_status.
699 Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
701 * infrun.c (normal_stop): Set stop_pc after popping the dummy frame
702 in case execution was stopped in the called function.
703 * stack.c (print_frame_info, frame_info): If backtracing through
704 a call dummy, handle the starting source line number on a line
705 boundary like backtracing through sigtramp.
706 * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
707 for call dummy frame right. Remove old test for dummy frame,
708 it has been unused at least since gdb-3.5.
709 * sparc-tdep.c (sparc_push_dummy_frame): Set return address register
712 Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
714 * infcmd.c (signal_command): Accept 0 as legitimate signal number.
716 Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
718 * infrun.c (signals_info), target.c (target_signal_from_name):
719 Use ugly casts to avoid enumvar < enumvar or enumvar++.
721 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
723 * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
724 * inflow.c (terminal_ours_1): When discussing how to deal with the
725 tty state, make note of query() as well as readline.
727 * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
728 signals for which stop and print are cleared by default.
730 Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
732 * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
733 reserved fields to hold a stub unwind entry type. Fix typo.
734 (stub_unwind_entry): New structure for raw stub unwind entries.
735 (stub_unwind_types): The types of stubs we may encounter.
736 (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
737 * hppa-tdep.c (rp_saved): Use additional information provided
738 by linker stub unwind descriptors.
739 (frameless_function_invocation): Likewise.
740 (frame_chain_valid): Likewise.
741 * paread.c (compare_unwind_entries): New function for sorting
742 unwind table entries.
743 (read_unwind_info): Rewrite to remove dependency on host endianness.
744 Read in data from the $UNWIND_END$ subspace which contains linker
745 stub unwind descriptors. Merge that data into the basic unwind
748 * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
750 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
752 * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
753 from either the symbol name or the auxent.
754 * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
757 Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com)
759 * Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h.
761 Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
763 * README: Update notes for alpha port.
765 Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
767 * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
768 for operation fault, constraint fault, and type fault.
770 Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
772 * Makefile.in (init.c): Add comment explaining formatting conventions.
774 * c-exp.y (parse_number): Assign to temporary between the right
775 shifts, to work around a bug in the SCO compiler.
777 * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
778 Add various files which were added to GDB recently.
780 * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
783 * Makefile.in: Add mostlyclean target.
785 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
789 Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com)
791 * main.c (show_commands): Make return type of extern
792 history_get be HIST_ENTRY, rather than struct _hist_entry.
793 (The latter loses with the upcoming merged readline.)
795 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
797 * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
798 const char *, not char *.
800 * symtab.h (struct symbol): Make section short, not unsigned short.
802 * symtab.c (lookup_symbol): Add comment about QUIT here.
804 * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
806 * c-exp.y (parse_number): Check for overflow regardless of range
807 checking. Fix overflow check to use unsigned LONGEST, not
810 * c-exp.y (parse_number): Make it so that integer constants are
811 builtin_type_long_long if builtin_type_long isn't big enough or if
812 an "LL" suffix is used. Properly handle "UL" or "LU" suffixes.
814 * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
815 Print our "()" first, then recurse for the target type.
817 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
819 * remote-udi.c (udi_create_inferior): Quote empty execfile argument.
821 * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
823 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
825 * utils.c (request_quit): Re-establish signal handler regardless
828 * config/mips/xm-irix4.h: Define HAVE_TERMIOS.
830 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
832 * i960-tdep.c: Include target.h.
834 Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com)
836 * lynx-nat.c (sys/wait.h): Don't use absolute pathname.
838 Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
840 * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
841 changes (status -> ourstatus; declare status, etc.).
842 * config/nm-lynx.h: Fix child_wait prototype and include target.h.
844 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
846 * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
848 Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
850 * remote-mips.c (mips_request, mips_wait): Correct prototypes.
852 Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
854 * config/i386/xm-linux.h: Define HAVE_TERMIOS.
856 Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
858 * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
860 Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
862 * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
863 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
865 * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
868 Add search to target vector (#if 0'd until after 4.12):
869 * target.h (to_search, target_search): Add.
870 * gdbcore.h, core.c (generic_search): Add.
871 * remote.c (remote_search): Add.
872 * a29k-tdep.c (init_frame_info): Use target_search to find traceback
875 * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
876 is on, call find_pc_function rather than relying just on the minimal
877 symbols (probably only matters for symbol readers which don't put
878 statics in the minimal symbols, but changing this strikes me as
879 not conservative enough).
880 Initialize name_location in all cases.
881 If no symbol and no msymbol, don't print anything symbolic.
883 * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
885 Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
887 * printcmd.c (print_address_symbolic): Make it search the
888 symtabs for variables as well as functions. Add `set print
889 fast-symbolic-addr' and default it to fast (the old way).
890 Print line numbers for data items as well as functions.
892 * symtab.c (find_addr_symbol): Return the symtab and the symbol
893 address, if a symbol is found (take two more args pointing to
894 where to store these results).
896 * symtab.h (find_addr_symbol): Add prototype.
898 Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
900 * objfiles.h: Fix comments to reflect the fact that the phrase
901 "top of stack" always refers to where the pushing and popping takes
902 place, regardless of whether it is at the highest or lowest address.
904 Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
906 * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
907 compiler generated tag names.
908 * mdebugread.c (parse_type): Handle cross references to qualified
910 * valops.c (value_struct_elt): Improve error message if the
911 address of a method is requested from an object instance.
912 * valops.c (search_struct_method): Make name_matched non-static
913 to get it initialized correctly.
914 * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
915 exclude segment register which are not writable on newer SCO versions.
917 Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
919 * go32-xdep.c: Remove unused function uerror.
920 (sigsetmask): Declare return type. Declare argument (to match the
921 way it is called). Explicitly return 0.
923 Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
925 * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
926 partial_symbol): Shrink the storage sizes of symbols, by making
927 enums into 1-byte bitfields when compiled __GNUC__, moving all the
928 enums and small ints to the end of each struct to improve
929 alignment, and switching the section number from int to unsigned
932 Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
934 * symtab.c (find_addr_symbol): New routine that will find the nearest
935 symbol associated with an address. It does so by exhaustive
936 search of the symtabs, so it's slow but complete.
938 Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
940 * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
941 to [0,0] rather than [0, end of first source file]. This avoids
942 problems with other parts of GDB looking for linetables in the
943 _globals_ symtab. Eliminate variables num_object_files and
944 first_object_file_end.
946 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
948 * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
949 (pop_frame): Restore PC2 and LR0 from dummy frames.
950 (push_dummy_frame): Save PC2 and LR0 into dummy frames.
951 (setup_arbitrary_frame): Handle 3 args and set up real frames.
952 * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
953 (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
954 (SETUP_ARBITRARY_FRAME): Define.
956 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
958 * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
960 Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
962 * remote-udi.c (udi_resume): Correct prototype.
964 Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
966 * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
967 hppa_frame_find_saved_regs.
968 * hppa-tdep.c (dig_fp_from_stack): Delete function.
969 (prologue_inst_adjust_sp): New function.
970 (is_branch, inst_saves_gr, inst_saves_fr): New functions.
971 (skip_prologue): Completely rewrite to use unwind information.
972 (hppa_frame_find_saved_regs): Likewise.
974 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
976 * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
977 to convert a signal number with appropriate bounds checking.
979 * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
981 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
983 * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
984 print a newline to end the display anyway.
986 * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
987 coprocessor status regs) when popping a frame. This fixes
988 float exceptions that occur after calling inferior functions.
990 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
991 Read and write the fsr (float status register) to/from the child
992 process along with the float regs. Remove Peter Schauer's change
993 of May 24 '93, which has higher overhead and doesn't solve the
994 real problem (which was that FSR wasn't being set).
996 Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
998 * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
999 stack overflow check isn't right after the register stack
1000 adjustment instruction. Metaware R2.3u compiler moves other
1001 things in front of it. This fix isn't perfect but is what's
1004 Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1006 * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
1008 * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
1009 character filenames.
1010 * configure.in: Change accordingly.
1012 Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
1014 * m68k-stub.c, sparc-stub.c: removed spurious introduction of
1015 _filtered io routines from these two files.
1017 Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1019 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
1020 config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
1021 * mdebugread.c (parse_symbol): Handle enum sh.type produced by
1023 * mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
1025 Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1027 * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
1028 printing to gdb_stderr.
1030 * remote-udi.c (udi_kill): Don't close the connection, just set
1031 inferior_pid to zero.
1032 (udi_mourn): Call remove_breakpoints.
1034 * remote-udi.c: Remove obsolete need_artificial_traps comment.
1036 * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
1038 Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1040 * symtab.c (lookup_symbol): Don't try adding .c to the name.
1042 * remote-bug.c: At the start of each section, reset srec_frame
1045 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
1046 * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
1047 * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
1048 code which looks for those two waitkinds. Use switch statement.
1049 * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
1050 CHILD_SPECIAL_WAITSTATUS.
1052 * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
1053 * Move target_signal_from_host, target_signal_to_host, and
1054 store_waitstatus from inftarg.c to target.c. procfs needs them.
1055 * target.c: Include "wait.h" and <signal.h>.
1056 * target.h, infrun.c (proceed), proceed callers: Pass new code
1057 TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
1058 enums being treated as unsigned and is cleaner.
1059 * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
1061 * infcmd.c (signal_command), infrun.c (signals_info):
1062 Don't allow user to specify numeric equivalent of
1063 TARGET_SIGNAL_DEFAULT.
1065 Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
1067 * config/alpha/alpha-netware.mt: New target support for Alpha
1069 * configure.in: Add alpha-*-netware* target.
1071 Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
1073 * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
1075 Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1077 * target.h: Add enum target_waitkind, enum target_signal, and
1078 struct target_waitstatus. Change status argument to target_wait to
1079 be struct target_waitstatus * instead of int *.
1080 * target.h, infrun.c, all targets: Change type of signal arguments
1081 to resume(), proceed(), and target_resume() from int to enum
1083 * All targets (*_wait, *_resume): Change accordingly.
1084 * infcmd.c (program_info, signal_command), throughout infrun.c,
1085 * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
1086 * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
1087 signal code stuff right with the new signals would be non-trivial).
1088 * inferior.h (stop_signal): Make it enum target_signal not int.
1089 * target.c, target.h (target_signal_to_string, target_signal_to_name,
1090 target_signal_from_name): New functions.
1091 * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
1092 store_waitstatus): New functions.
1093 * procfs.c (procfs_notice_signals): Use them.
1094 * i960-tdep.c (i960_fault_to_signal): New function, to replace
1096 * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
1098 * objfiles.c (build_objfile_section_table): Don't abort() if
1099 objfile->sections is already set.
1101 * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
1102 to match recent change to exec.c.
1106 * main.c (print_gdb_version): Change year to 1994.
1108 * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
1109 * Makefile.in (NONSRC): Add ChangeLog-93.
1111 Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1113 * stabsread.c (read_type): Allow defining several type numbers
1114 at once (e.g. "(1,2)=(3,4)="...).
1116 * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
1118 * breakpoint.c (frame_in_dummy): Check PC as well as frame.
1120 Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1122 * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
1123 to process_one_symbol.
1124 * symtab.c (find_pc_psymbol): Search global_psymbols as well to
1125 avoid caching a bad endaddr in find_pc_partial_function.
1127 Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1129 * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
1131 Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1133 * infrun.c (wait_for_inferior): Do not step or step resume past
1134 the end of a one-line function we just stepped into.
1136 For older changes see ChangeLog-93
1142 version-control: never