1 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
3 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
4 offset on little-endian when passing _Decimal32.
5 (ppc64_sysv_abi_return_value_base): Likewise for return values.
7 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
9 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
10 of the overlapped FP register within the VSX register on little-
12 (efpr_pseudo_register_write): Likewise.
14 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
16 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
17 offset on little-endian when passing small structures.
19 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
21 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
22 (struct ppc64_sysv_argpos): New data structure.
23 (ppc64_sysv_abi_push_float): Remove.
24 (ppc64_sysv_abi_push_val): New function.
25 (ppc64_sysv_abi_push_integer): Likewise.
26 (ppc64_sysv_abi_push_freg): Likewise.
27 (ppc64_sysv_abi_push_vreg): Likewise.
28 (ppc64_sysv_abi_push_param): Likewise.
29 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
30 (ppc64_sysv_abi_return_value_base): New function.
31 (ppc64_sysv_abi_return_value): Refactor to use it.
33 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
35 * NEWS: Document new target powerpc64le-*-linux*.
37 2014-02-04 Mark Kettenis <kettenis@gnu.org>
39 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
40 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
42 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
43 register set used in ELF core dumps. Add floating-point register set.
45 2014-02-03 Kevin Buettner <kevinb@redhat.com>
47 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
48 dwarf2_to_gdb[] table using symbolic constants. Adjust
49 penultimate entry from number representing the PC register
50 to symbolic constant representing the MDR register. Add
51 constant for the PC register to the end of the table.
53 2014-02-03 Mark Kettenis <kettenis@gnu.org>
55 * bsd-kvm.c: Include <sys/param.h>
57 2014-02-03 Mark Kettenis <kettenis@gnu.org>
59 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
61 2014-01-31 Joel Brobecker <brobecker@adacore.com>
63 * ada-lang.h (clear_ada_sym_cache): Delete.
65 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
67 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
69 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
71 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
72 the sigreturn register save area only if the syscall is
75 2014-01-29 Joel Brobecker <brobecker@adacore.com>
77 * valops.c (value_slice): Minor reformatting.
79 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
81 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
83 2014-01-28 Joel Brobecker <brobecker@adacore.com>
85 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
87 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
88 (ada_ignore_descriptive_types_p): New static global.
89 (find_parallel_type_by_descriptive_type): Return immediately
90 if ada_ignore_descriptive_types_p is set.
91 (_initialize_ada_language): Register new commands "maintenance
92 set ada", "maintenance show ada", "maintenance set ada
93 ignore-descriptive-types" and "maintenance show ada
94 ignore-descriptive-types".
95 * NEWS: Add entry for new "maint ada set/show
96 ignore-descriptive-types" commands.
98 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
100 * record-btrace.c (record_btrace_close): Call btrace_teardown
103 2014-01-27 Joel Brobecker <brobecker@adacore.com>
105 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
108 2014-01-27 Joel Brobecker <brobecker@adacore.com>
110 * ada-typeprint (type_is_full_subrange_of_target_type):
112 (print_range): Add parameter bounds_prefered_p. If not set,
113 try printing range types using the name of their base type.
114 (print_range_type): Add parameter bounds_prefered_p.
115 Use it in call to print_range.
116 (print_array_type, ada_print_type): Update calls to print_range
117 and print_range_type.
119 2014-01-27 Joel Brobecker <brobecker@adacore.com>
121 * ada-typeprint.c (print_array_type, print_choices, print_range)
122 (print_range_bound, print_dynamic_range_bound, print_range_type):
125 2014-01-27 Joel Brobecker <brobecker@adacore.com>
127 * ada-typeprint.c (print_range): Add missing empty line
128 after local declaration.
130 2014-01-27 Joel Brobecker <brobecker@adacore.com>
132 * ada-valprint.c (print_optional_low_bound): Get index_type's
133 target type for as long as it is a TYPE_CODE_RANGE.
135 2014-01-27 Joel Brobecker <brobecker@adacore.com>
137 * procfs.c (procfs_make_note_section): Remove assertion and
140 2014-01-24 Yao Qi <yao@codesourcery.com>
142 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
143 * corelow.c (get_core_siginfo): Likewise.
145 2014-01-24 Yao Qi <yao@codesourcery.com>
147 * remote.c (remote_write_bytes_aux): Change type of 'len' to
148 ULONGEST. Don't check 'len' is negative.
149 (remote_write_bytes): Change type of 'len' to ULONGEST.
151 2014-01-23 Tom Tromey <tromey@redhat.com>
154 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
155 Handle exception from frame.block.
156 (FrameVars.fetch_frame_locals): Likewise.
158 2014-01-23 Tom Tromey <tromey@redhat.com>
161 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
162 on a NULL pointer. Move "goto error" to correct place.
164 2014-01-23 Tom Tromey <tromey@redhat.com>
167 * python/py-framefilter.c (apply_frame_filter): Call
168 ensure_python_env after computing gdbarch.
170 2014-01-23 Yao Qi <yao@codesourcery.com>
172 * target.c (raw_memory_xfer_partial): Change argument type
173 from void * to gdb_byte *.
174 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
176 2014-01-22 Doug Evans <dje@google.com>
178 New gdbserver option --debug-format=timestamp.
181 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
183 * syscalls/s390x-linux.xml: New file.
184 * syscalls/s390-linux.xml: New file.
185 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
186 (XML_SYSCALL_FILENAME_S390X): Likewise.
187 (op_svc): New enum value for SVC opcode.
188 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
189 (s390_linux_get_syscall_number): New function.
190 (s390_gdbarch_init): Register '*get_syscall_number' and the
191 syscall xml file name.
192 * data-directory/Makefile.in (SYSCALLS_FILES): Add
193 "s390-linux.xml" and "s390x-linux.xml".
194 * NEWS: Announce new feature.
196 2014-01-22 Baruch Siach <baruch@tkos.co.il>
198 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
200 2014-01-22 Pedro Alves <palves@redhat.com>
202 * xtensa-config.c: Include defs.h.
204 2014-01-22 Joel Brobecker <brobecker@adacore.com>
206 * common/common-utils.h: Add "ARI:" comment beside __func__
209 2014-01-22 Joel Brobecker <brobecker@adacore.com>
211 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
214 2014-01-21 Roland McGrath <mcgrathr@google.com>
216 * configure.ac: Call AM_PROG_INSTALL_STRIP.
217 * configure: Regenerate.
218 * aclocal.m4: Regenerate.
219 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
220 New substituted variables.
221 (install-strip): New target.
222 (INSTALL_SCRIPT): New substituted variable.
223 (FLAGS_TO_PASS): Add it.
224 (install-only): Use $(INSTALL_SCRIPT) rather than
225 $(INSTALL_PROGRAM) for gcore.
227 2014-01-20 Tom Tromey <tromey@redhat.com>
229 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
232 2014-01-20 Tom Tromey <tromey@redhat.com>
234 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
235 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
236 (deprecated_cmd_warning, complete_on_cmdlist): Update.
237 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
238 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
239 (struct cmd_list_element) <flags>: Remove.
240 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
241 doc_allocated>: New fields.
242 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
244 * maint.c (maintenance_do_deprecate): Update.
245 * top.c (execute_command): Update.
247 2014-01-20 Baruch Siach <baruch@tkos.co.il>
249 * xtensa-linux-nat.c: Include asm/ptrace.h.
251 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
253 * Makefile.in (SFILES): Add d-support.c.
254 (COMMON_OBS): Add d-support.o.
255 * d-lang.h (d_parse_symbol): Add comment, now defined in
257 * d-lang.c (parse_call_convention)
258 (parse_attributes, parse_function_types)
259 (parse_function_args, parse_type, parse_identifier)
260 (call_convention_p, d_parse_symbol): Move functions to ...
261 * d-support.c: ... New file.
263 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
265 * d-lang.h (d_parse_symbol): Add declaration.
266 * d-lang.c (extract_identifiers)
267 (extract_type_info): Remove functions.
268 (parse_call_convention, parse_attributes)
269 (parse_function_types, parse_function_args)
270 (parse_type, parse_identifier, call_convention_p)
271 (d_parse_symbol): New functions.
272 (d_demangle): Use d_parse_symbol to demangle D symbols.
274 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
276 * d-lang.h (struct builtin_d_type): New data type.
277 (builtin_d_type): Add declaration.
278 * d-lang.c (d_language_arch_info, build_d_types)
279 (builtin_d_type): New functions.
280 (enum d_primitive_types): New data type.
281 (d_language_defn): Change c_language_arch_info to
282 d_language_arch_info.
283 (d_type_data): New static variable.
284 (_initialize_d_language): Initialize d_type_data.
286 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
288 * d-lang.h (d_main_name): Add declaration.
289 * d-lang.c (d_main_name): New function.
290 * symtab.c (find_main_name): Add call to d_main_name.
292 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
294 * d-lang.c (d_language_defn): Change macro_expansion_c to
297 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
299 * MAINTAINERS: Add myself as a write-after-approval maintainer.
301 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
303 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
304 gdb_exception" declaration.
305 * remote.c (getpkt_or_notif_sane): Likewise.
307 2014-01-17 Doug Evans <dje@google.com>
309 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
310 function, contents of dirnames_to_char_ptr_vec_append moved here.
311 (delim_string_to_char_ptr_vec): New function.
312 (dirnames_to_char_ptr_vec_append): Rewrite.
313 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
315 2014-01-17 Doug Evans <dje@google.com>
317 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
319 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
320 #include "common-utils.h".
321 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
322 * common/vec.h (VEC_ASSERT_PASS): Update.
323 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
324 (MACH_CHECK_ERROR): Update.
326 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
328 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
330 * gdbarch.h: Regenerate.
332 2014-01-16 Tom Tromey <tromey@redhat.com>
334 * value.c (struct value) <regnum>: Move earlier.
336 2014-01-16 Tom Tromey <tromey@redhat.com>
338 * remote.c (extended_remote_create_inferior): Rename from
339 extended_remote_create_inferior_1. Add "ops" argument. Remove
342 2014-01-16 Pedro Alves <palves@redhat.com>
344 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
345 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
348 2014-01-16 Doug Evans <dje@google.com>
350 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
352 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
354 * btrace.h (btrace_thread_flag): New.
355 (struct btrace_thread_info) <flags>: New.
356 * record-btrace.c (record_btrace_resume_thread)
357 (record_btrace_find_thread_to_move, btrace_step_no_history)
358 (btrace_step_stopped, record_btrace_start_replaying)
359 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
360 (record_btrace_find_resume_thread): New.
361 (record_btrace_resume, record_btrace_wait): Extend.
362 (record_btrace_can_execute_reverse): New.
363 (record_btrace_open): Fail in non-stop mode.
364 (record_btrace_set_replay): Split into this, ...
365 (record_btrace_stop_replaying): ... this, ...
366 (record_btrace_clear_histories): ... and this.
367 (init_record_btrace_ops): Init to_can_execute_reverse.
370 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
372 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
373 (forward_target_decr_pc_after_break)
374 (target_decr_pc_after_break): New.
375 * target.c (forward_target_decr_pc_after_break)
376 (target_decr_pc_after_break): New.
377 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
378 instead of gdbarch_decr_pc_after_break.
379 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
380 instead of gdbarch_decr_pc_after_break.
381 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
382 instead of gdbarch_decr_pc_after_break.
383 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
384 instead of gdbarch_decr_pc_after_break.
385 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
386 instead of gdbarch_decr_pc_after_break.
387 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
388 instead of gdbarch_decr_pc_after_break.
390 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
392 * btrace.c: Include regcache.h.
393 (btrace_add_pc): New.
394 (btrace_enable): Call btrace_add_pc.
395 (btrace_is_empty): New.
396 * btrace.h (btrace_is_empty): New.
397 * record-btrace.c (require_btrace, record_btrace_info): Call
400 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
402 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
404 (linux_disable_btrace): Change return type.
405 * common/linux-btrace.h (linux_read_btrace): Change parameters
406 and return type to allow error reporting. Update users.
407 (linux_disable_btrace): Change return type. Update users.
408 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
411 (btrace_block) <begin>: Comment on BEGIN == 0.
412 * btrace.c (btrace_compute_ftrace): Start from the end of
414 (btrace_stitch_trace, btrace_clear_history): New.
415 (btrace_fetch): Read delta trace, return if replaying.
416 (btrace_clear): Move clear history code to btrace_clear_history.
417 (parse_xml_btrace): Throw an error if parsing failed.
418 * target.h (struct target_ops) <to_read_btrace>: Change parameters
419 and return type to allow error reporting.
420 (target_read_btrace): Change parameters and return type to allow
422 * target.c (target_read_btrace): Update.
423 * remote.c (remote_read_btrace): Support delta reads. Pass
427 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
429 * record.h (record_btrace_frame_unwind)
430 (record_btrace_tailcall_frame_unwind): New declarations.
431 * dwarf2-frame: Include record.h
432 (dwarf2_frame_cfa): Throw an error for btrace frames.
433 * record-btrace.c: Include hashtab.h.
434 (btrace_get_bfun_name): New.
435 (btrace_call_history): Call btrace_get_bfun_name.
436 (struct btrace_frame_cache): New.
438 (bfcache_hash, bfcache_eq, bfcache_new): New.
439 (btrace_get_frame_function): New.
440 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
441 (record_btrace_frame_this_id): Compute own id.
442 (record_btrace_frame_prev_register): Provide PC, throw_error
443 for all other registers.
444 (record_btrace_frame_sniffer): Detect btrace frames.
445 (record_btrace_tailcall_frame_sniffer): New.
446 (record_btrace_frame_dealloc_cache): New.
447 (record_btrace_frame_unwind): Add new functions.
448 (record_btrace_tailcall_frame_unwind): New.
449 (_initialize_record_btrace): Allocate cache.
450 * btrace.c (btrace_clear): Call reinit_frame_cache.
453 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
455 * record-btrace.c (record_btrace_set_replay)
456 (record_btrace_goto_begin, record_btrace_goto_end)
457 (record_btrace_goto): New.
458 (init_record_btrace_ops): Initialize them.
461 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
463 * record-btrace.c (record_btrace_find_new_threads)
464 (record_btrace_thread_alive): New.
465 (init_record_btrace_ops): Initialize to_find_new_threads and
468 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
470 * record-btrace.c (record_btrace_resume): New.
471 (record_btrace_wait): New.
472 (init_record_btrace_ops): Initialize to_wait and to_resume.
474 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
476 * record-btrace.c (record_btrace_xfer_partial)
477 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
478 (record_btrace_allow_memory_access): New.
479 (init_record_btrace_ops): Initialize new methods.
480 * target.c (raw_memory_xfer_partial): Bail out if target reports
481 that this memory is not available.
483 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
485 * target.h (target_ops) <to_insert_breakpoint>
486 <to_remove_breakpoint>: Add target_ops parameter.
487 (forward_target_insert_breakpoint): New.
488 (forward_target_remove_breakpoint): New.
489 (memory_remove_breakpoint, memory_insert_breakpoint):
490 Add target_ops parameter.
491 * target.c (target_insert_breakpoint): Split into this and ...
492 (forward_target_insert_breakpoint): ... this.
493 (target_remove_breakpoint): Split into this and ...
494 (forward_target_remove_breakpoint): ... this.
495 (debug_to_insert_breakpoint): Add target_ops parameter.
496 Call forward_target_insert_breakpoint.
497 (debug_to_remove_breakpoint): Add target_ops parameter.
498 Call forward_target_remove_breakpoint.
499 (update_current_target): Do not inherit or default to_insert_breakpoint
500 and to_remove_breakpoint.
501 * corelow.c (ignore): Add target_ops parameter.
502 * exec.c (ignore): Add target_ops parameter.
503 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
504 Add target_ops parameter.
505 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
506 Add target_ops parameter.
507 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
508 Add target_ops parameter.
509 * record-full.c (record_full_beneath_to_insert_breakpoint)
510 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
511 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
512 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
513 (record_full_core_remove_breakpoint): Add target_ops parameter.
515 (record_full_beneath_to_insert_breakpoint_ops)
516 (record_full_beneath_to_remove_breakpoint_ops)
517 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
518 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
519 tmp_to_remove_breakpoint_ops,
520 record_full_beneath_to_insert_breakpoint_ops, and
521 record_full_beneath_to_remove_breakpoint_ops.
522 * remote-m32r-sdi.c (m32r_insert_breakpoint)
523 (m32r_remove_breakpoint): Add target_ops parameter.
524 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
525 Add target_ops parameter.
526 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
527 Add target_ops parameter.
529 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
530 Markus Metzger <markus.t.metzger@intel.com>
532 * record-btrace.c: Include frame-unwind.h.
533 (record_btrace_frame_unwind_stop_reason)
534 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
535 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
537 (init_record_btrace_ops): Install it.
539 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
541 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
544 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
546 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
549 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
551 * frame-unwind.c: Include target.h.
552 (frame_unwind_try_unwinder): New function with code from ...
553 (frame_unwind_find_by_frame): ... here. New variable
554 unwinder_from_target, call also target_get_unwinder)
555 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
556 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
557 * target.h (struct target_ops): New fields to_get_unwinder and
558 to_get_tailcall_unwinder.
559 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
561 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
563 * record-btrace.c (record_btrace_fetch_registers)
564 (record_btrace_store_registers)
565 (record_btrace_to_prepare_to_store): New.
566 (init_record_btrace_ops): Add the above.
568 2014-01-16 Tom Tromey <tromey@redhat.com>
570 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
571 * target.h (struct target_ops) <to_prepare_to_store>: Add
573 (target_prepare_to_store): Add argument.
574 * target.c (debug_to_prepare_to_store): Add argument.
575 (update_current_target): Update.
576 * remote.c (remote_prepare_to_store): Add 'self' argument.
577 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
578 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
579 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
580 * record-full.c (record_full_core_prepare_to_store): Add 'self'
582 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
583 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
584 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
585 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
586 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
588 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
590 * btrace.h (replay) <replay>: New.
591 (btrace_is_replaying): New.
592 * btrace.c (btrace_clear): Free replay iterator.
593 (btrace_is_replaying): New.
594 * record-btrace.c (record_btrace_is_replaying): New.
595 (record_btrace_info): Print insn number if replaying.
596 (record_btrace_insn_history): Start at replay position.
597 (record_btrace_call_history): Start at replay position.
598 (init_record_btrace_ops): Init to_record_is_replaying.
600 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
602 * record-btrace.c (record_btrace_insn_history_range): Include
604 (record_btrace_insn_history_from): Adjust range.
605 (record_btrace_call_history_range): Include
607 (record_btrace_call_history_from): Adjust range.
608 * NEWS: Announce changes.
610 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
612 * record.h (enum record_print_flag)
613 <record_print_indent_calls>: New.
614 * record.c (get_call_history_modifiers): Recognize /c modifier.
615 (_initialize_record): Document /c modifier.
616 * record-btrace.c (btrace_call_history): Add btinfo parameter.
617 Reorder fields. Optionally indent the function name. Update
619 * NEWS: Announce changes.
621 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
623 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
625 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
627 * btrace.c (ftrace_new_function): Start counting at one.
628 * record-btrace.c (record_btrace_info): Adjust number of calls
632 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
634 * record-btrace.c (btrace_call_history_insn_range): Print
635 insn range as [begin, end].
637 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
639 * btrace.h (struct btrace_func_link): New.
640 (enum btrace_function_flag): New.
641 (struct btrace_inst): Rename to ...
642 (struct btrace_insn): ...this. Update all users.
643 (struct btrace_func) <ibegin, iend>: Remove.
644 (struct btrace_func_link): New.
645 (struct btrace_func): Rename to ...
646 (struct btrace_function): ...this. Update all users.
647 (struct btrace_function) <segment, flow, up, insn, insn_offset)
648 (number, level, flags>: New.
649 (struct btrace_insn_iterator): Rename to ...
650 (struct btrace_insn_history): ...this.
652 (struct btrace_insn_iterator, btrace_call_iterator): New.
653 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
654 (struct btrace_target_info) <begin, end, level>
655 <insn_history, call_history>: New.
656 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
657 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
658 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
659 (btrace_call_number, btrace_call_begin, btrace_call_end)
660 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
661 (btrace_find_function_by_number, btrace_set_insn_history)
662 (btrace_set_call_history): New.
663 * btrace.c (btrace_init_insn_iterator)
664 (btrace_init_func_iterator, compute_itrace): Remove.
665 (ftrace_print_function_name, ftrace_print_filename)
666 (ftrace_skip_file): Change
668 (ftrace_init_func): Remove.
669 (ftrace_debug): Use new btrace_function fields.
670 (ftrace_function_switched): Also consider gaining and
671 losing symbol information).
672 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
673 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
674 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
676 (ftrace_new_function): Move. Remove debug print.
677 (ftrace_update_lines, ftrace_update_insns): New.
678 (ftrace_update_function): Check for call, ret, and jump.
679 (compute_ftrace): Renamed to ...
680 (btrace_compute_ftrace): ...this. Rewritten to compute call
682 (btrace_fetch, btrace_clear): Updated.
683 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
684 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
685 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
686 (btrace_call_number, btrace_call_begin, btrace_call_end)
687 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
688 (btrace_find_function_by_number, btrace_set_insn_history)
689 (btrace_set_call_history): New.
690 * record-btrace.c (require_btrace): Use new btrace thread
692 (record_btrace_info, btrace_insn_history)
693 (record_btrace_insn_history, record_btrace_insn_history_range):
694 Use new btrace thread info fields and new iterator.
695 (btrace_func_history_src_line): Rename to ...
696 (btrace_call_history_src_line): ...this. Use new btrace
698 (btrace_func_history): Rename to ...
699 (btrace_call_history): ...this. Use new btrace thread info
700 fields and new iterator.
701 (record_btrace_call_history, record_btrace_call_history_range):
702 Use new btrace thread info fields and new iterator.
704 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
706 * frame.h (frame_id_build_unavailable_stack_special): New.
707 * frame.c (frame_id_build_unavailable_stack_special): New.
709 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
711 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
712 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
713 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
715 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
716 (i386_insn_is_jump, i386_jmp_p): New.
717 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
718 insn_is_jump to gdbarch.
719 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
720 * gdbarch.h: Regenerated.
721 * gdbarch.c: Regenerated.
722 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
723 (default_insn_is_jump): New.
724 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
725 (default_insn_is_jump): New.
727 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
729 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
731 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
732 (btrace_read_type) <btrace_read_new>: Change to ...
733 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
735 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
737 * common/linux-btrace.c (linux_read_btrace): Free trace from
740 2014-01-15 Doug Evans <dje@google.com>
742 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
745 2014-01-15 Tom Tromey <tromey@redhat.com>
747 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
748 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
749 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
750 (set_objfile_main_name): New function.
751 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
752 language_of_main>: New fields.
753 (set_objfile_main_name): Declare.
754 * symtab.c (find_main_name): Loop over objfiles to find the main
756 (set_main_name): Now static.
757 (get_main_info): Add comment.
758 * symtab.h (set_main_name): Don't declare.
760 2014-01-15 Tom Tromey <tromey@redhat.com>
762 * symtab.c (main_progspace_key): New global.
763 (struct main_info): New.
764 (name_of_main, language_of_main): Remove.
765 (get_main_info, main_info_cleanup): New function.
766 (set_main_name, main_name, main_language): Use get_main_info.
767 (_initialize_symtab): Initialize main_progspace_key.
769 2014-01-15 Tom Tromey <tromey@redhat.com>
771 * dbxread.c (process_one_symbol): Update.
772 * dwarf2read.c (read_partial_die): Update.
773 * symfile.c (set_initial_language): Call main_language.
774 * symtab.c (language_of_main): Now static.
775 (set_main_name): Add 'lang' parameter.
776 (find_main_name): Update.
777 (main_language): New function.
778 (symtab_observer_executable_changed): Update.
779 * symtab.h (set_main_name): Update.
780 (language_of_main): Remove.
781 (main_language): Declare.
783 2014-01-15 Tom Tromey <tromey@redhat.com>
785 * symfile.c (init_entry_point_info): Use new "initialized" field.
787 * objfiles.h (struct entry_point) <initialized>: New field.
788 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
789 (struct objfile) <ei>: ...here. Remove.
790 * objfiles.c (entry_point_address_query): Update.
792 2014-01-15 Tom Tromey <tromey@redhat.com>
794 * objfiles.c (entry_point_address_query): Relocate entry point
796 (objfile_relocate1): Do not relocate entry point address.
797 * objfiles.h (struct entry_info) <entry_point>: Update comment.
798 <the_bfd_section_index>: New field.
799 * symfile.c (init_entry_point_info): Find the entry point's
802 2014-01-15 Tom Tromey <tromey@redhat.com>
804 * solib-frv.c (enable_break): Use entry_point_address_query.
806 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
808 * NEWS: Add note on improved process record-replay on
811 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
813 * arm-tdep.c (enum arm_record_result): New enum.
814 (arm_record_unsupported_insn): New function.
815 (arm_record_coproc_data_proc): Removed.
816 (thumb2_record_ld_st_multiple): New function.
817 (thumb2_record_ld_st_dual_ex_tbb): New function.
818 (thumb2_record_data_proc_sreg_mimm): New function.
819 (thumb2_record_ps_dest_generic): New function.
820 (thumb2_record_branch_misc_cntrl): New function.
821 (thumb2_record_str_single_data): New function.
822 (thumb2_record_ld_mem_hints): New function.
823 (thumb2_record_ld_word): New function.
824 (thumb2_record_lmul_lmla_div): New function.
825 (thumb2_record_decode_insn_handler): New function.
826 (decode_insn): Add thumb32 instruction handlers.
828 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
830 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
831 (struct arm_linux_record_tdep): Declare.
832 (arm_canonicalize_syscall): New function.
833 (arm_all_but_pc_registers_record): New function.
834 (arm_linux_syscall_record): New function.
835 (arm_linux_init_abi): Add syscall recording constructs.
836 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
837 decoding. (arm_record_coproc_data_proc): Update arm syscall
839 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
840 <arm_syscall_record>: New field.
841 * configure.tgt (arm*-*-linux*): Add linux-record.o to
844 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
846 * arm-tdep.c (thumb_record_misc): Update to use sp as base
847 register for push instruction recording.
849 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
851 * arm-tdep.c (thumb_record_misc): Update to correct logical
852 error while recording ldm, ldmia and pop instructions.
854 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
856 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
858 2014-01-15 Pedro Alves <palves@redhat.com>
860 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
861 (go32_resume, go32_fetch_registers, store_register)
862 (go32_store_registers, go32_prepare_to_store)
863 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
864 (go32_create_inferior, go32_can_run, go32_terminal_init)
865 (go32_terminal_inferior, go32_terminal_ours): Delete forward
868 2014-01-15 Tom Tromey <tromey@redhat.com>
870 * target.h (async_callback_ftype): New typedef.
871 (struct target_ops) <to_async>: Use it.
873 2014-01-15 Joel Brobecker <brobecker@adacore.com>
875 * python/py-value.c (get_field_type): Remove unnecessary curly
876 braces for single-statement if block.
878 2014-01-15 Joel Brobecker <brobecker@adacore.com>
880 * python/py-type.c (convert_field): Add missing empty line
883 2014-01-14 Doug Evans <dje@google.com>
885 * symfile.h (expand_symtabs_matching): Renamed from
886 expand_partial_symbol_names. Update prototype.
887 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
888 * symfile.c (expand_symtabs_matching): Renamed from
889 expand_partial_symbol_names. New args file_matcher, kind.
890 Rename arg fun to symbol_matcher.
891 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
892 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
893 ada_expand_partial_symbol_name.
894 (ada_make_symbol_completion_list): Update to call
895 expand_symtabs_matching.
896 (ada_add_global_exceptions): Call expand_symtabs_matching.
897 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
898 call map_symbol_filenames.
899 * symtab.c (sources_info): Update to call map_symbol_filenames.
900 (search_symbols): Call expand_symtabs_matching.
901 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
902 (default_make_symbol_completion_list_break_on): Update to call
903 expand_symtabs_matching.
904 (make_source_files_completion_list): Update to call
905 map_symbol_filenames.
907 2014-01-14 Doug Evans <dje@google.com>
909 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
910 (expand_symtabs_symbol_matcher_ftype): New typedef.
911 (quick_symbol_functions.expand_symtabs_matching): Update to use.
912 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
913 * symfile.c (expand_partial_symbol_names): Update to use
914 expand_symtabs_symbol_matcher_ftype.
915 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
916 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
917 Arg name_matcher renamed to symbol_matcher.
918 * psymtab.c (recursively_search_psymtabs): Update to use
919 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
921 (expand_symtabs_matching_via_partial): Update to use
922 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
923 Arg name_matcher renamed to symbol_matcher.
925 2014-01-14 Doug Evans <dje@google.com>
927 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
928 (map_partial_symbol_filenames): Ditto.
929 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
930 (map_partial_symbol_filenames): Ditto.
931 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
932 (map_partial_symbol_filenames): Ditto.
933 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
934 (map_partial_symbol_filenames): Ditto.
935 * symtab.c: Delete #include "psymtab.h".
937 2014-01-14 Pedro Alves <palves@redhat.com>
938 Tom Tromey <tromey@redhat.com>
940 * infrun.c (use_displaced_stepping): Use find_record_target
941 instead of RECORD_IS_USED.
942 (adjust_pc_after_break): Use record_full_is_used instead of
944 * record-btrace.c (record_btrace_open): Call record_preopen
945 instead of checking RECORD_IS_USED.
946 * record-full.c (record_full_shortname)
947 (record_full_core_shortname): New globals.
948 (record_full_is_used): New function.
949 (find_full_open): Call record_preopen instead of checking
951 (init_record_full_ops): Set the target's shortname to
952 record_full_shortname.
953 (init_record_full_core_ops): Set the target's shortname to
954 record_full_core_shortname.
955 * record-full.h (record_full_is_used): Declare.
956 * record.c (find_record_target): Make extern.
957 (record_preopen): New function.
958 * record.h (RECORD_IS_USED): Delete macro.
959 (find_record_target, record_preopen): Declare functions.
961 2014-01-14 Yao Qi <yao@codesourcery.com>
963 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
964 'len''s type to ULONGEST.
965 (core_xfer_shared_libraries_aix): Likewise.
966 * gdbarch.c, gdbarch.h: Regenerated.
967 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
968 Change type of 'len' to ULONGEST.
969 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
970 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
972 2014-01-14 Yao Qi <yao@codesourcery.com>
974 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
975 type of 'len' to ULONGEST.
976 (linux_xfer_osdata_processgroups): Likewise.
977 (linux_xfer_osdata_threads): Likewise.
978 (linux_xfer_osdata_fds): Likewise.
979 (linux_xfer_osdata_isockets): Likewise.
980 (linux_xfer_osdata_shm): Likewise.
981 (linux_xfer_osdata_sem): Likewise.
982 (linux_xfer_osdata_msg): Likewise.
983 (linux_common_xfer_osdata): Likewise.
984 (struct osdata_type) <getter>: Likewise.
985 * common/linux-osdata.h (linux_common_xfer_osdata): Update
988 2014-01-14 Yao Qi <yao@codesourcery.com>
990 * target.h (target_xfer_partial_ftype): Update.
991 (struct target_ops) <to_xfer_partial>: Change 'len' type to
993 * aix-thread.c (aix_thread_xfer_partial): Change type of
994 argument 'len' to ULONGEST.
995 * auxv.c (procfs_xfer_auxv): Likewise.
996 (ld_so_xfer_auxv): Likewise.
997 (memory_xfer_auxv): Likewise.
998 * bfd-target.c (target_bfd_xfer_partial): Likewise.
999 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1000 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1001 * corelow.c (core_xfer_partial): Likewise.
1002 * ctf.c (ctf_xfer_partial): Likewise.
1003 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1005 (darwin_read_dyld_info): Likewise.
1006 (darwin_xfer_partial): Likewise.
1007 * exec.c (section_table_xfer_memory_partial): Likewise.
1008 (exec_xfer_partial): Likewise.
1009 * exec.h (section_table_xfer_memory_partial): Update
1011 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1012 instead of plongest.
1013 (gnu_xfer_partial): Likewise.
1014 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1015 (ia64_hpux_xfer_solib_got): Likewise.
1016 (ia64_hpux_xfer_partial): Likewise.
1017 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1018 * inf-ptrace.c (inf_ptrace_xfer_partial):
1019 * inf-ttrace.c (inf_ttrace_xfer_partial):
1020 * linux-nat.c (linux_xfer_siginfo): Likewise.
1021 (linux_nat_xfer_partial): Likewise.
1022 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1023 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1024 * monitor.c (monitor_xfer_memory): Likewise.
1025 (monitor_xfer_partial): Likewise.
1026 * procfs.c (procfs_xfer_partial): Likewise.
1027 * record-full.c (record_full_xfer_partial): Likewise.
1028 (record_full_core_xfer_partial): Likewise.
1029 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1030 instead of plongest.
1031 (gdbsim_xfer_partial): Likewise.
1032 * remote.c (remote_xfer_partial): Likewise.
1033 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1034 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1036 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1037 (rs6000_xfer_shared_libraries): Likewise.
1038 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1039 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1040 (sparc_xfer_partial): Likewise.
1041 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1042 (spu_xfer_partial): Likewise.
1043 * spu-multiarch.c (spu_xfer_partial): Likewise.
1044 * target.c (target_read_live_memory): Likewise.
1045 (memory_xfer_live_readonly_partial): Likewise.
1046 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1047 (target_xfer_partial, default_xfer_partial): Likewise.
1048 (current_xfer_partial): Likewise.
1049 * tracepoint.c (tfile_xfer_partial): Likewise.
1050 * windows-nat.c (windows_xfer_memory): Likewise. Call
1051 pulongest instead of plongest.
1052 (windows_xfer_partial): Likewise.
1053 (windows_xfer_shared_libraries): Likewise.
1055 2014-01-14 Yao Qi <yao@codesourcery.com>
1057 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1058 target_xfer_partial_ftype.
1060 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1064 * valops.c (value_struct_elt_bitpos): New function
1065 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1066 object to 'None' if the field name is an empty string ("").
1067 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1068 attribute to look for a field when 'name' is 'None'.
1069 (get_field_type): New function
1071 2014-01-13 Doug Evans <dje@google.com>
1074 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1075 (try_open_dwop_file): Ditto.
1076 * gdb_bfd.c: #include "vec.h".
1077 (bfdp): New typedef.
1078 (struct gdb_bfd_data): New member included_bfds.
1079 (gdb_bfd_unref): Unref all included bfds.
1080 (gdb_bfd_record_inclusion): New function.
1081 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1083 2014-01-13 Tom Tromey <tromey@redhat.com>
1085 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1087 2014-01-13 Tom Tromey <tromey@redhat.com>
1089 * defs.h (use_windows): Remove.
1090 * gdb.c (main): Update.
1091 * main.c (captured_main, gdb_main): Update.
1092 * main.h (struct captured_main_args) <use_windows>: Remove.
1093 * top.c (use_windows): Remove.
1095 2014-01-13 Tom Tromey <tromey@redhat.com>
1097 * defs.h (deprecated_flush_hook): Remove.
1099 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1102 * linux-thread-db.c (try_thread_db_load): Add parameter
1103 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1104 (try_thread_db_load_from_pdir_1): Move it there from here.
1105 (try_thread_db_load_from_sdir): Update caller.
1106 (try_thread_db_load_from_dir): Move it there from here.
1108 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1110 * regformats/regdat.sh: Always rewrite the register file.
1112 2014-01-13 Pedro Alves <palves@redhat.com>
1114 * Makefile.in (CHECK_HEADERS): New variable.
1115 (check-headers:): New rule.
1117 2014-01-13 Tom Tromey <tromey@redhat.com>
1119 * cli/cli-setshow.c (do_set_command): Update.
1120 * defs.h (deprecated_set_hook): Remove.
1121 * top.c (deprecated_set_hook): Remove.
1123 2014-01-13 Pedro Alves <palves@redhat.com>
1125 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1126 the tracepoint if the PC is a pseudo-register.
1128 2014-01-13 Tom Tromey <tromey@redhat.com>
1130 * defs.h (XCALLOC): Remove.
1131 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1132 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1133 * dwarf2loc.c (allocate_piece_closure): Likewise.
1134 * elfread.c (elf_symfile_segments): Likewise.
1135 (elf_symfile_segments): Likewise.
1136 * gdbtypes.c (copy_type_recursive): Likewise.
1137 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1138 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1139 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1141 * mt-tdep.c (mt_gdbarch_init): Likewise.
1142 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1144 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1145 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1146 * registry.c (registry_alloc_data): Likewise.
1147 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1148 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1149 * serial.c (serial_fdopen_ops): Likewise.
1150 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1152 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1153 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1156 2014-01-13 Tom Tromey <tromey@redhat.com>
1158 * defs.h (XMALLOC): Remove.
1159 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1160 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1161 * cli-out.c (struct ui_out *): Likewise.
1162 * cli/cli-dump.c (add_dump_command): Likewise.
1163 (add_dump_command): Likewise.
1164 * complaints.c (get_complaints): Likewise.
1165 (find_complaint): Likewise.
1166 * dwarf2-frame.c (execute_cfa_program): Likewise.
1167 * dwarf2read.c (abbrev_table_read_table): Likewise.
1168 * gdbarch.sh: Likewise.
1169 * gdbarch.c: Rebuild.
1170 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1171 * interps.c (interp_new): Likewise.
1172 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1173 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1174 * mi/mi-console.c (mi_console_file_new): Likewise.
1175 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1176 * mi/mi-out.c (mi_out_new): Likewise.
1177 * mi/mi-parse.c (mi_parse): Likewise.
1178 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1179 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1180 * observer.c (xalloc_observer_list_node): Likewise.
1181 * regcache.c (regcache_xmalloc_1): Likewise.
1182 * reggroups.c (reggroup_new): Likewise.
1183 (_initialize_reggroup): Likewise.
1184 * registry.c (register_data_with_cleanup): Likewise.
1185 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1186 * ser-base.c (serial_ttystate): Likewise.
1187 * ser-mingw.c (make_pipe_state): Likewise.
1188 * ser-pipe.c (pipe_open): Likewise.
1189 * serial.c (serial_open): Likewise.
1190 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1191 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1192 (tui_alloc_win_info): Likewise.
1193 (tui_add_content_elements): Likewise.
1194 * tui/tui-file.c (tui_file_new): Likewise.
1195 * tui/tui-out.c (tui_out_new): Likewise.
1196 * ui-file.c (mem_file_new): Likewise.
1197 * ui-out.c (push_level): Likewise.
1198 (make_cleanup_ui_out_end): Likewise.
1199 (append_header_to_list): Likewise.
1200 (ui_out_new): Likewise.
1201 * user-regs.c (user_reg_add_builtin): Likewise.
1203 2014-01-13 Tom Tromey <tromey@redhat.com>
1205 * defs.h (XZALLOC): Remove.
1206 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1207 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1208 (get_ada_tasks_inferior_data): Likewise.
1209 * auto-load.c (get_auto_load_pspace_data): Likewise.
1210 * auxv.c (get_auxv_inferior_data): Likewise.
1211 * bfd-target.c (target_bfd_reopen): Likewise.
1212 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1213 (deprecated_insert_raw_breakpoint): Likewise.
1214 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1215 * corelow.c (core_open): Likewise.
1216 * darwin-nat.c (darwin_check_new_threads): Likewise.
1217 (darwin_attach_pid): Likewise.
1218 * dummy-frame.c (dummy_frame_push): Likewise.
1219 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1220 * dwarf2loc.c (allocate_piece_closure): Likewise.
1221 * elfread.c (elf_symfile_segments): Likewise.
1222 * eval.c (ptrmath_type_p): Likewise.
1223 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1224 * gdbtypes.c (alloc_type_arch): Likewise.
1225 (alloc_type_instance): Likewise.
1226 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1227 * inf-child.c (inf_child_can_use_agent): Likewise.
1228 * inflow.c (get_inflow_inferior_data): Likewise.
1229 * infrun.c (save_infcall_suspend_state): Likewise.
1230 * jit.c (jit_reader_load): Likewise.
1231 (get_jit_objfile_data): Likewise.
1232 (get_jit_program_space_data): Likewise.
1233 (jit_object_open_impl): Likewise.
1234 (jit_symtab_open_impl): Likewise.
1235 (jit_block_open_impl): Likewise.
1236 (jit_frame_sniffer): Likewise.
1237 * linux-fork.c (add_fork): Likewise.
1238 * maint.c (make_command_stats_cleanup): Likewise.
1239 * objfiles.c (get_objfile_pspace_data): Likewise.
1240 * opencl-lang.c (struct lval_closure): Likewise.
1241 * osdata.c (osdata_start_osdata): Likewise.
1242 * progspace.c (new_address_space): Likewise.
1243 (add_program_space): Likewise.
1244 * remote-sim.c (get_sim_inferior_data): Likewise.
1245 * sh-tdep.c (sh_gdbarch_init): Likewise.
1246 * skip.c (Ignore): Likewise.
1247 (skip_delete_command): Likewise.
1248 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1249 (library_list_start_library): Likewise.
1250 (solib_aix_current_sos): Likewise.
1251 * solib-darwin.c (get_darwin_info): Likewise.
1252 (darwin_current_sos): Likewise.
1253 * solib-dsbt.c (get_dsbt_info): Likewise.
1254 * solib-ia64-hpux.c (new_so_list): Likewise.
1255 (ia64_hpux_get_solib_linkage_addr): Likewise.
1256 * solib-spu.c (append_ocl_sos): Likewise.
1257 (spu_current_sos): Likewise.
1258 * solib-svr4.c (get_svr4_info): Likewise.
1259 (svr4_keep_data_in_core): Likewise.
1260 (library_list_start_library): Likewise.
1261 (svr4_default_sos): Likewise.
1262 (svr4_read_so_list): Likewise.
1263 * solib-target.c (library_list_start_library): Likewise.
1264 (solib_target_current_sos): Likewise.
1265 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1266 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1267 * symfile.c (default_symfile_segments): Likewise.
1268 * target-descriptions.c (tdesc_data_init): Likewise.
1269 (tdesc_create_reg): Likewise.
1270 (struct tdesc_type *): Likewise.
1271 (tdesc_create_vector): Likewise.
1272 (tdesc_set_struct_size): Likewise.
1273 (struct tdesc_type *): Likewise.
1274 (tdesc_free_feature): Likewise.
1275 (tdesc_create_feature): Likewise.
1276 * windows-nat.c (windows_add_thread): Likewise.
1277 (windows_make_so): Likewise.
1278 * xml-support.c (gdb_xml_body_text): Likewise.
1279 (gdb_xml_create_parser_and_cleanup): Likewise.
1280 (xml_process_xincludes): Likewise.
1281 * xml-syscall.c (allocate_syscalls_info): Likewise.
1282 (syscall_create_syscall_desc): Likewise.
1284 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1286 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1287 function, with code from i386_stap_parse_special_token.
1288 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1289 (i386_stap_parse_special_token): Move code to the two functions
1292 2014-01-09 Pedro Alves <palves@redhat.com>
1293 Hui Zhu <hui@codesourcery.com>
1296 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1297 bp_err_string. Don't mark the location shlib_disabled if the
1298 error thrown wasn't a generic or memory error. Catch errors
1299 thrown while inserting breakpoints in overlayed code. Output
1300 error message of software breakpoints.
1301 * remote.c (remote_insert_breakpoint): If this breakpoint has
1302 target-side commands but this stub doesn't support Z0 packets,
1303 throw NOT_SUPPORTED_ERROR error.
1304 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1305 * target.h (target_insert_breakpoint): Extend comment.
1306 (target_insert_hw_breakpoint): Add comment.
1308 2014-01-08 Pedro Alves <palves@redhat.com>
1310 * remote.c (remote_add_thread): Add threads silently if starting
1312 (remote_notice_new_inferior): If in all-stop, and starting up,
1313 don't call notice_new_inferior.
1314 (get_current_thread): New function, factored out from ...
1315 (add_current_inferior_and_thread): ... this. Adjust.
1316 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1317 found any thread, then select the remote's current thread as GDB's
1320 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1322 * NEWS: Create a new section for the next release branch.
1323 Rename the section of the current branch, now that it has
1326 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1328 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1329 * version.in: Bump version to 7.7.50.DATE-cvs.
1331 2014-01-08 Yao Qi <yao@codesourcery.com>
1333 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1334 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1335 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1337 2014-01-08 Yao Qi <yao@codesourcery.com>
1339 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1340 return value of bfd_get_filename to symbol_file_add_from_bfd.
1342 2014-01-08 Pierre Muller <muller@sourceware.org>
1345 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1346 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1347 to prim_record_mininal_symbol_and_info.
1348 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1349 in call to prim_record_minimal_symbol_and_info.
1350 (read_pe_exported_syms): Set index field of section_data.
1352 2014-01-07 Andrew Pinski <apinski@cavium.com>
1354 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1355 * features/aarch64.c: Regenerate.
1357 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1359 * target.c (return_null): Define.
1360 (update_current_target): Use it instead of return_zero for
1361 functions that return a pointer.
1363 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1365 * source.c (add_path): Fix check for duplicated paths in the previously
1368 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1370 * ada-lang.c: Remove duplicated include statements.
1371 * alphabsd-nat.c: Ditto.
1372 * amd64-darwin-tdep.c: Ditto.
1373 * amd64fbsd-nat.c: Ditto.
1374 * auto-load.c: Ditto.
1376 * breakpoint.c: Ditto.
1378 * fork-child.c: Ditto.
1379 * gdb_usleep.c: Ditto.
1380 * i386-darwin-tdep.c: Ditto.
1381 * i386fbsd-nat.c: Ditto.
1383 * inferior.c: Ditto.
1385 * linux-nat.c: Ditto.
1386 * linux-tdep.c: Ditto.
1387 * m68kbsd-nat.c: Ditto.
1388 * m68klinux-nat.c: Ditto.
1389 * microblaze-tdep.c: Ditto.
1390 * mips-linux-tdep.c: Ditto.
1391 * mn10300-tdep.c: Ditto.
1392 * nto-tdep.c: Ditto.
1393 * opencl-lang.c: Ditto.
1395 * printcmd.c: Ditto.
1396 * regcache.c: Ditto.
1397 * remote-m32r-sdi.c: Ditto.
1401 * tilegx-linux-nat.c: Ditto.
1402 * tilegx-tdep.c: Ditto.
1403 * tracepoint.c: Ditto.
1405 * vaxbsd-nat.c: Ditto.
1406 * windows-nat.c: Ditto.
1407 * xtensa-tdep.c: Ditto.
1409 2014-01-07 Yao Qi <yao@codesourcery.com>
1411 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1413 2014-01-07 Yao Qi <yao@codesourcery.com>
1414 Joel Brobecker <brobecker@adacore.com>
1416 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1417 (pdc_write_regs): Likewise.
1418 (fetch_regs_kernel_thread): Likewise.
1419 (store_regs_kernel_thread): Likewise.
1421 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1423 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1424 tagged type objects to their actual type.
1426 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1428 * ada-valprint.c (print_field_values): Add "language" parameter.
1429 Update calls to print_field_values and print_variant_part.
1430 Pass new parameter "language" in call to val_print instead
1431 of "current_language". Replace call to ada_val_print by call
1433 (print_variant_part): Add "language" parameter.
1434 (ada_val_print_struct_union): Update call to print_field_values.
1436 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1438 * ada-valprint.c (ui_memcpy): Delete.
1439 (ada_print_floating): Update documentation. Add empty line
1440 between between function documentation and implementation.
1441 Delete variable "buffer". Use ui_file_xstrdup in place of
1442 ui_file_put. Minor adjustments following this change.
1444 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1446 * ada-valprint.c (ada_val_print_string): New function,
1447 extracted from ada_val_print_array.
1448 (ada_val_print_array): Replace extracted code by call
1449 to ada_val_print_string followed by a return. Move
1450 "else" branch to the function's top block.
1452 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1454 * ada-valprint.c (ada_val_print_array): Move implementation
1455 down. Rename parameter "offset" and "val" into "offset_aligned"
1456 and "original_value" respectively. Add parameter "offset".
1458 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1460 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1461 re-organizing the code. Change the "???" message printed
1462 when target type is a TYPE_CODE_UNDEF into
1463 "<ref to undefined type>".
1465 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1467 * ada-valprint.c (print_record): Delete, implementation inlined...
1468 (ada_val_print_struct_union): ... here. Remove call to
1469 ada_check_typedef in inlined implementation.
1471 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1473 * ada-valprint.c (ada_val_print_gnat_array): New function,
1474 extracted from ada_val_print_1;
1475 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1476 (ada_val_print_flt, ada_val_print_struct_union)
1477 (ada_val_print_ref): Likewise.
1478 (ada_val_print_1): Delete variables i and elttype.
1479 Replace extracted-out code by call to corresponding
1482 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1484 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1486 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1488 * ada-valprint.c (ada_val_print_1): Replace calls to
1489 ada_val_print_1 by calls to val_print.
1491 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1493 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1494 Update calls to self accordingly. Replace calls to c_val_print
1495 by calls to val_print.
1497 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1499 * ada-valprint.c (print_record): Delete declaration.
1500 (adjust_type_signedness, ada_val_print_1): Likewise.
1501 (ada_val_print): Move function implementation down.
1502 (print_variant_part, print_field_values, print_record):
1503 Move function implementation up.
1505 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1507 * python/py-type.c (typy_get_name): New function.
1508 (type_object_getset): Add entry for attribute "name".
1509 * NEWS: Add entry mentioning this new attribute.
1511 2014-01-07 Yao Qi <yao@codesourcery.com>
1513 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1516 2014-01-07 Yao Qi <yao@codesourcery.com>
1518 * gnu-nat.c (info_port_rights): Add qualifier const to
1521 2014-01-07 Yao Qi <yao@codesourcery.com>
1523 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1525 2014-01-07 Yao Qi <yao@codesourcery.com>
1527 * gnu-nat.c (make_inf) Update declaration.
1528 (make_inf): Make it static.
1529 (inf_set_traced): Likewise.
1530 (inf_port_to_thread, inf_task_died_status): Likewise.
1532 2014-01-07 Yao Qi <yao@codesourcery.com>
1534 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1536 2014-01-07 Yao Qi <yao@codesourcery.com>
1538 * gnu-nat.c (_initialize_gnu_nat): Declare.
1540 2014-01-07 Yao Qi <yao@codesourcery.com>
1542 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1544 (struct gdbarch_info) <byte_order>: Change type to
1546 <byte_order_for_code>: Likewise.
1547 * gdbarch.c, gdbarch.h: Regenerated.
1549 2014-01-06 Sasha Smundak <asmundak@google.com>
1551 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1553 2014-01-06 Tom Tromey <tromey@redhat.com>
1555 * doublest.c (convert_doublest_to_floatformat): Use const, not
1557 * somread.c (som_symtab_read): Likewise.
1559 2014-01-07 Hui Zhu <hui@codesourcery.com>
1561 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1562 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1563 (gdb_bfd_fopen): Ditto.
1564 (gdb_bfd_openr): Ditto.
1565 (gdb_bfd_openw): Ditto.
1566 (gdb_bfd_openr_iovec): Ditto.
1567 (gdb_bfd_fdopenr): Ditto.
1568 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1569 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1571 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1573 * symfile-mem.c (symbol_file_add_from_memory): Removed
1574 gdb_bfd_stash_filename.
1576 2014-01-03 Doug Evans <dje@google.com>
1578 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1581 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1583 Update year range in copyright notice of all files.
1585 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1587 * top.c (print_gdb_version): Set copyright year to 2014.
1589 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1591 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1593 For older changes see ChangeLog-2013.
1599 version-control: never