1 Mon May 15 11:23:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
3 * proc-events.c (init_syscall_table): Delete stray ``;''.
4 * ui-out.c (ui_out_set_flags, ui_out_clear_flags): Return old
6 * mdebugread.c (START_PSYMTAB): Add paren to avoid x=x=x.
8 2000-05-12 Kevin Buettner <kevinb@redhat.com>
10 * dwarf2read.c (dwarf2_const_value_data): Fix typo in sign
13 Fri May 12 20:38:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
15 * TODO: Mention weak symbol problem. Mention UnixWare thread
18 Fri May 12 14:12:17 2000 Andrew Cagney <cagney@b1.cygnus.com>
20 * README: Update section on kernel debugging.
22 Fri May 12 19:13:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
24 * mips-tdep.c (mips_get_saved_register): New function. Handle
25 case of 32 ABI saving 32 bit registers on stack when target has 64
27 (mips_gdbarch_init): Update.
29 Fri May 12 14:46:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
31 * mips-tdep.c (MIPS_EABI): Fix typo. Test for MIPS_ABI_EABI64.
33 Thu May 11 21:52:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
35 * configure.in (WERROR_CFLAGS): Check that GCC accepts a -W
36 options before using them. Report result.
37 * configure: Regenerate.
39 2000-05-11 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
41 * coffread.c (coff_symtab_read): In the case of C_THUMBEXT |
42 C_THUMBEXTFUNC | C_EXT, sec will never ever be the index for
43 .rodata, because cs_to_section doesn't deal with .rodata. Fix test
46 Thu May 11 21:33:59 2000 Andrew Cagney <cagney@b1.cygnus.com>
48 * gdbarch.sh (gdbarch_dump): Print the value of GDB_MULTI_ARCH.
49 Always check that a macro is defined before printing it.
50 * gdbarch.c: Re-generate.
52 Thu May 11 17:22:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
54 * README: Update for GDB 5.0.
56 Thu May 11 13:24:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
58 * mips-tdep.c (MIPS_DEFAULT_STACK_ARGSIZE): Fix typo.
60 * config/mips/tm-irix5.h (GDB_MULTI_ARCH): Add
61 definition. Disable. Document known problems.
62 (MIPS_DEFAULT_ABI): Define.
64 * mips-tdep.c (enum mips_abi): Define.
65 (struct gdbarch_tdep): Replace mips_eabi with mips_abi.
67 (mips_gdbarch_init): Add preliminary support for IRIX N32 ABI.
68 Determine ABI from either ELF_FLAGS or MIPS_DEFAULT_ABI. When
69 looking for a matching architecture require a matching MIPS_ABI.
70 (mips_gdbarch_init): Cleanup arch_debug information.
72 2000-05-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
74 * solib.c (symbol_add_stub): Remember the index and the name of
75 the section with the lowest address. Use this data (instead of
76 data from .text) to pass info into symbol_file_add.
78 * elfread.c (record_minimal_symbol_and_info): Use the section
79 where the symbol lives to get the index, instead of guessing.
81 2000-05-10 Michael Snyder <msnyder@seadog.cygnus.com>
83 Make Sparc a Multi-Arch target. Discard PARAMS macro (require ANSI).
84 * sparc-tdep.c: include arch-utils.h.
85 (SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
86 DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
87 (GDB_TARGET_IS_SPARC64): make into a runtime test.
88 (struct frame_extra_info): Define, use instead of the macro.
89 (Many places): Use alloca instead of statically allocated buffers
90 that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
91 (sparc_extract_struct_value_address): Accept a pointer arg instead
92 of an array sized by REGISTER_BYTES.
93 (examine_prologue): Accept a pointer to an array of CORE_ADDR,
94 instead of the defunct struct frame_saved_regs. Recognize new
95 Sparc64 store instructions as part of the prologue. Ignore the
96 destination of a frame store when parsing the prologue (so long
97 as it's on the stack).
98 (sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
99 (sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
100 instead of the defunct struct frame_saved_regs.
101 (supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
102 supply_register. Provide 4-byte offset to compensate for diff
103 between size of the prgreg_t elements on a 64-bit host and size
104 of the registers for a 32-bit target. Fill all inaccessible regs
105 with zero so they won't keep being requested again and again.
106 (fill_gregset): Handle 32/64 size difference between registers
107 and prgreg_t. Handle as many new 64-bit regs as possible.
108 (supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
109 (sparc_push_arguments): Rename to sparc32_push_arguments.
110 Copy arguments into registers as well as onto stack, so that the
111 CALL_DUMMY (code pushed onto the target stack) is not required.
112 (sparc_extract_return_value): Rename to sparc32_extract_return_value.
113 (sparc_store_return_value): Use memset instead of bzero.
114 Use write_register_gen instead of write_register_bytes.
115 (sparclet_store_return_value): New function.
116 (_initialize_sparc_tdep): Call register_gdbarch_init to activate
117 the gdbarch multi-architecture system.
118 (sp64_push_arguments): Rename to sparc64_push_arguments.
119 Extend to store arguments in general registers as well as on stack.
120 (sparc64_extract_return_value): Rename to sp64_extract_return_value.
121 Use as a private function, to be called by the new external function
122 sparc64_extract_return_value.
123 (sparclet_extract_return_value): New function.
124 (sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
125 sparc64_register_name, sparc_print_extra_frame_info,
126 sparclite_register_name, sparclet_register_name,
127 sparc_push_return_address, sparc64_use_struct_convention,
128 sparc32_store_struct_return, sparc64_store_struct_return,
129 sparc32_register_virtual_type, sparc64_register_virtual_type,
130 sparc32_register_size, sparc64_register_size,
131 sparc32_register_byte, sparc64_register_byte,
132 sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
133 sparc_convert_to_raw, sparc_frame_init_saved_regs,
134 sparc_frame_address, sparc_gdbarch_fix_call_dummy,
135 sparc_coerce_float_to_double, sparc_call_dummy_address,
136 sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
137 sparc_return_value_on_stack): New functions supporting multi-arch.
138 (sparc_gdbarch_init): New function; initialize multi-arch.
139 (struct gdbarch_tdep): Define, use for private multi-arch data.
140 * config/sparc/tm-sparc.h: Move definitions around, enclose with
141 #ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
142 definitions. Add enums for register names, to help debugging gdb.
143 This header file must work for non-multi-arch and for multi-arch.
144 * config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration. Also add
145 AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
146 Define GDB_MULTI_ARCH.
147 * config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
148 Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
149 * config/sparc/tm-sparclite.h: Ditto.
150 * config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
151 * sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
152 avoid using deprecated REGISTER_NAMES macro.
153 * Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
155 2000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>
157 * gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
158 * gdbarch.c, gdbarch.h: Regenerate.
159 * core-regset.c: Change FP0_REGNUM to a runtime test.
162 * sparc-tdep.c: Ditto.
164 * i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
167 * sol-thread.c (sol_thread_create_inferior): only add the thread
168 to the thread list if it is not already in there.
169 (prototypes for thread_db func ptrs): pretty up formatting.
171 2000-05-08 Eli Zaretskii <eliz@is.elta.co.il>
173 * config/djgpp/djconfig.sh: Use more warning switches.
175 * config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
176 @V@ placebo. djunpack.bat changed accordingly.
178 Mon May 8 11:19:47 2000 Andrew Cagney <cagney@b1.cygnus.com>
180 * mips-tdep.c (size_auto, size_32, size_64, size_enums): Rename
181 saved_gpreg_size_auto, saved_gpreg_size_32, saved_gpreg_size_64
182 and saved_gpreg_size_enums.
183 (mips_stack_argsize): Update. Cleanup.
185 * mips-tdep.c (STACK_ARGSIZE): Delete macro. Replaced by
187 (MIPS_NABI32): Delete macro. Replaced by
188 MIPS_REGS_HAVE_STACK_HOME_P.
189 (mips_push_arguments): Update.
190 (mips_push_arguments): Replace check for MIPS_EABI or MIPS_NABI32
191 with test for MIPS_REGS_HAVE_STACK_HOME_P.
192 (MIPS_REGS_HAVE_STACK_HOME_P): Define. Provide non- multi-arch
194 (struct gdbarch_tdep): Add mips_regs_have_stack_home_p and
195 mips_default_stack_argsize.
196 (MIPS_STACK_ARGSIZE): Define as mips_stack_argsize.
197 (mips_stack_argsize_string): New static variable.
198 (mips_stack_argsize): New function, handle default case.
199 (__initialize_mips_tdep): Add command ``set mips stack-arg-size''
200 implemented as an enum using size_auto et.al.
201 (mips_gdbarch_init): Initialize mips_default_stack_argsize and
202 mips_regs_have_stack_home_p.
204 * config/mips/tm-irix5.h (MIPS_DEFAULT_SAVED_REGSIZE): Define as 8
206 (MIPS_REGS_HAVE_STACK_HOME_P): Define as 0 for n32.
208 Mon May 8 00:49:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
210 * procfs.c (PROCFS_TRACE): Delete definition.
211 * proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always
214 2000-05-05 Michael Snyder <msnyder@seadog.cygnus.com>
216 * procfs.c: Cleanup of procfs tracing. Move defines and
217 prototypes to proc-utils.h
218 * proc-utils.h: Define tracing macros. Declare trace functions.
219 * proc-api.c: Make procfs tracing a runtime option.
220 (prepare_to_trace): New function, abstracted out of several
221 places. Open a trace file if one is required.
222 (ioctl_with_trace, write_with_trace, open_with_trace,
223 close_with_trace, wait_with_trace, lseek_with_trace):
224 Report errno if an error occurs in a system call.
225 (write_with_trace): Make 2nd arg void *, to agree with write.
227 2000-05-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
229 * elfread.c (elf_symtab_read): The calculation of 'offset'
230 must be done for each symbol, not just once. The index
231 used must be the index of the section where 'sym' resides,
234 2000-05-05 Michael Snyder <msnyder@seadog.cygnus.com>
236 * procfs.c (many functions): change int cmd; to long cmd;
237 Solaris /proc API calls this parameter a long, and requires it
238 for 64-bit hosts (where sizeof(long) != sizeof(int)). UnixWare
239 calls it an int, but on existing UnixWare hosts, int and long
240 are the same size. So long it must be. If a future UnixWare
241 version has problems with this, we'll have to use autoconf.
242 * proc-api.c (write_with_trace): use long instead of int.
244 2000-05-04 Mark Kettenis <kettenis@gnu.org>
246 * i386-linux-nat.c: Define PT_READ_U and PT_WRITE_U if they're not
249 2000-05-01 Mark Kettenis <kettenis@gnu.org>
251 * infrun.c (handle_inferior_event): Add missing call to keep_going
252 and missing return when handling an ordinary signal from the
255 2000-05-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
257 * objfiles.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
258 SECT_OFF_RODATA): Define as functions of OBJFILE. Add
259 sect_index_text, sect_index_data, sect_index_rodata,
260 sect_index_bss to objfile structure.
261 * gdb-stabs.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
262 SECT_OFF_RODATA): Remove.
263 * objfiles.c (allocate_objfile): Initialize
264 sect_index_{text,data,bss,rodata} to -1, for error detection.
266 * symfile.c (default_symfile_offsets): Initialize
267 sect_index_{text,data,bss,rodata} from bfd information.
268 * xcoffread.c (xcoff_symfile_offsets): Ditto.
269 * somread.c (som_symfile_offsets): Initialize
270 sect_index_{text,data,bss,rodata}.
272 * coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c,
273 hp-symtab-read.c, hpread.c, mdebugread.c, minsyms.c,
274 mipsread.c, objfiles.c, os9kread.c, pa64solib.c, partial-stab.h,
275 remote-os9k.c, remote-vx.c, remote.c, rs6000-nat.c, somsolib.c,
276 stabsread.c, symfile.c, xcoffread.c:
277 Update use of SECT_OFF_{TEXT,DATA,BSS,RODATA} to depend on the
280 * xcoffread.c: Add new field objfile to find_targ_sec_arg.
282 Thu May 4 20:54:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
284 * config/mips/tm-mipsv4.h (Dest_Reg), config/mips/tm-irix5.h
285 (MIPS_NUM_ARG_REGS, Dest_Reg), config/mips/tm-mips.h
286 (MIPS_NUM_ARG_REGS), config/mips/tm-mips.h (MIPS_NUM_FP_ARG_REGS):
287 Delete unused macros.
289 2000-05-03 Michael Snyder <msnyder@seadog.cygnus.com>
291 * solib.c (elf_locate_base, info_sharedlibrary_command):
292 Look at the bfd to determine if it is elf32 or elf64, rather
293 than using an ifdef. This makes it runtime teststable and
296 2000-05-01 Mark Kettenis <kettenis@gnu.org>
298 * infrun.c (handle_inferior_event): When doing a "next", and
299 stepping out of a signal handler into its calling trampoline
300 ignore the value of step_frame_address.
301 (step_over_function): Only modify step_resume_breakpoint->frame if
302 the value of step_frame_address is non-zero.
304 2000-05-03 Michael Snyder <msnyder@seadog.cygnus.com>
306 * monitor.c (monitor_fetch_register): MAX_REGISTER_RAW_SIZE
307 is not static in the MULTI_ARCH world, so don't use it in a
308 static array declaration.
310 2000-05-03 Elena Zannoni <ezannoni@makita.cygnus.com>
312 * symtab.c (in_prologue): From Jim Blandy. Rewrite, more
313 intelligently, making sure we use the information from the
316 2000-05-02 H.J. Lu <hjl@gnu.org>
318 * ia64-tdep.c (ia64_gdbarch_init): Reference to ELFOSABI_NONE
319 instead of ELFOSABI_SYSV.
321 Tue May 2 19:07:20 2000 Andrew Cagney <cagney@b1.cygnus.com>
323 * gdbarch.sh (NPC_REGNUM, NNPC_REGNUM): Add.
324 * gdbarch.h, gdbarch.c: Re-generate.
326 * gdbserver/remote-utils.c (prepare_resume_reply): Change #ifdef
327 NPC_REGNUM to run-time test.
328 * findvar.c (generic_target_write_pc): Change #ifdef NPC_REGNUM
329 and NNPC_REGNUM to run-time test.
330 * procfs.c (procfs_fetch_registers): Change #ifdef NPC_REGNUM to
332 (procfs_store_registers): Ditto.
334 Tue May 2 18:48:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
336 * gdbarch.sh: Provide non- multi-arch defaults by direct
337 definition in "gdbarch.h" instead of going through "gdbarch.c".
338 * gdbarch.h, gdbarch.c: Re-generate.
339 * defs.h: When non- multi-arch, include "arch-utils.h" so that
340 legacy definitions are globally visible.
342 Tue May 2 16:32:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
344 * MAINTAINERS: Add Syd Polk to gdbtk maintainers.
345 (symtabs): Add Elena to symtabs maintainers list.
346 (Blanket Write Privs): Add Jim Blandy.
348 2000-05-01 Stan Shebs <shebs@apple.com>
350 Remove obsolete Gould configuration:
351 * configure.host, configure.tgt: Remove Gould configs.
352 * Makefile.in: Remove Gould-related actions.
353 * gould-xdep.c, gould-tdep.c, config/gould/*: Remove files.
354 * NEWS: Mention removal.
356 Mon May 1 15:37:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
358 From 2000-04-28 Andreas Jaeger <aj@suse.de>:
359 * defs.h: Properly check for GCC version number.
361 2000-04-30 Mark Kettenis <kettenis@gnu.org>
363 Fix single-stepping out of signal trampolines.
364 * config/i386/nm-linux.h (CHILD_RESUME): Define.
365 * i386-linux-nat.c (child_resume): New function.
367 Fri Apr 28 16:22:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
369 * blockframe.c (frameless_look_for_prologue): Use
370 PROLOG_FRAMELESS_P instead of SKIP_PROLOGUE_FRAMELESS_P.
371 * gdbarch.sh (PROLOG_FRAMELESS_P): Define.
372 * gdbarch.h, gdbarch.c: Re-generate.
373 * arch-utils.h, arch-utils.c (generic_prologue_frameless_p): New
376 Fri Apr 28 15:31:10 2000 Andrew Cagney <cagney@b1.cygnus.com>
378 From "Serge Nikulin" <nikulin@actsw.amat.com>:
379 * m68k-tdep.c (delta68_in_sigtramp): Return 0 when the function
382 2000-04-27 Michael Snyder <msnyder@seadog.cygnus.com>
384 * gdbarch.sh (d10v_daddr_p, d10v_iaddr_p, d10v_convert_daddr_to_raw,
385 d10v_convert_iaddr_to_raw): make these multi-arch functions optional.
386 * gdbarch.c, gdbarch.h: regenerate
388 Fri Apr 28 12:21:28 2000 Andrew Cagney <cagney@b1.cygnus.com>
390 From Tim Mooney <mooney@dogbert.cc.ndsu.nodak.edu>:
391 * target.c (do_monitor_command): Cast tcomplain to correct
392 function type in comparison.
394 Fri Apr 28 11:43:05 2000 Andrew Cagney <cagney@b1.cygnus.com>
396 From 2000-04-25 Guy Harris <guy@netapp.com>:
397 * config/alpha/alpha-osf3.mh (XDEPFILES): Add ser-tcp.o and
400 2000-04-27 Michael Snyder <msnyder@seadog.cygnus.com>
402 * jv-valprint.c (java_val_print): Add arg declaration,
403 fix compiler warning.
404 * corelow.c (core_open): Call set_gdbarch_from_file so that
405 gdbarch becomes aware of the architecture encoded in the
407 * findvar.c (write_register_gen): Export this useful interface.
408 * value.h (write_register_gen): Declare.
410 2000-04-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
412 * cxux-nat.c (add_shared_symbol_files): Don't treat .text section
413 as special in the section_addr_info structure.
414 * pa64solib.c (pa64_solib_add_solib_objfile): Ditto.
415 * osfsolib.c (symbol_add_stub): Ditto.
416 * irix5-nat.c (symbol_add_stub): Ditto.
418 Thu Apr 27 14:07:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
420 * mips-tdep.c, d10v-tdep.c: Include "arch-utils.h".
422 Thu Apr 27 10:06:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
424 * TODO: Document IRIX X ARM cross compile problems.
426 2000-04-26 Michael Snyder <msnyder@seadog.cygnus.com>
428 * utils.c (internal_verror): Call target_terminal_ours.
429 * wrapper.h: Fix minor comment typo.
430 * proc-api.c (write_with_trace): Change 'arg' from long to int.
431 Treat 'off_t' and 'size_t' as unsigned long in printfs.
432 (lseek_with_trace): Treat 'off_t' as unsigned long in printf.
433 * procfs.c (comments): Eliminate "???" in comments, which GCC
434 wants to interpret as a trigraph. (fill_gregset, supply_gregset,
435 fill_fpregset, supply_fpregset): Declare.
436 (procfs_wait): Sysargs is a long, change printf format to match.
437 (test-mapping, mapping_test, test_mapping_cmd) Remove (test only).
439 2000-04-26 Kevin Buettner <kevinb@redhat.com>
441 * config/djgpp/fnchange.lst (ia64-linux-nat.c): Map to
444 Wed Apr 26 13:50:35 2000 Philippe De Muyter <phdm@macqel.be>
446 * ax-gdb.c (agent_command): Remove now useless cast of
447 `free_current_contents' when passed to `make_cleanup'.
448 * coffread.c (coff_symfile_read): Ditto.
449 * dwarf2read.c (dwarf2_add_member_fn, read_array_type): Ditto.
450 (dwarf_decode_lines): Ditto.
451 * eval.c (parse_and_eval_address, parse_and_eval_address_1): Ditto.
452 (parse_and_eval, parse_to_comma_and_eval): Ditto.
453 * parse.c (parse_exp_1): Ditto.
454 * printcmd.c (print_command_1, output_command, set_command): Ditto.
455 (x_command, print_frame_args, printf_command): Ditto.
456 * top.c (execute_control_command): Ditto.
457 * tracepoint.c (validate_actionline): Ditto.
458 * typeprint.c (whatis_exp, ptype_command): Ditto.
459 (maintenance_print_type): Ditto.
461 2000-04-26 Kevin Buettner <kevinb@redhat.com>
463 * Makefile.in (ALLDEPFILES): Add ia64-linux-tdep.c.
464 (ia64-linux-tdep.o): Add dependencies.
465 (ia64-tdep.o): Add dependency for arch-utils.h.
466 * ia64-linux-tdep.c, ia64-tdep.c (arch-utils.h): Include.
468 2000-04-25 Michael Snyder <msnyder@seadog.cygnus.com>
470 * blockframe.c: Fix a minor typo in a comment.
472 2000-04-25 Kevin Buettner <kevinb@redhat.com>
474 * ia64-tdep.c (examine_prologue): Recognize store instructions;
475 those whose source operands are input registers which haven't
476 been seen before are considered to be part of the prologue.
478 Tue Apr 25 13:51:58 2000 glen mccready <gkm@pobox.com>
480 * rs6000-nat.c (xcoff_relocate_symtam): Recover from the wrong
481 patch being applied `Fri Apr 7 13:44:38 2000'.
483 2000-04-24 Kevin Buettner <kevinb@redhat.com>
485 * ia64-linux-tdep.c: New file.
486 * ia64-tdep.c (elf-bfd.h): Include.
487 (ia64_linux_sigcontext_register_address): New extern declaration.
488 (struct gdbarch_tdep): New struct.
489 (SIGCONTEXT_REGISTER_ADDRESS): New define.
490 (read_sigcontext_register): New static function.
491 (extract_bit_field, replace_bit_field, slotN_contents,
492 replace_slotN_contents): Made static.
493 (ia64_frame_chain, ia64_frame_saved_pc, ia64_init_extra_frame_info):
494 Added new code for signal handler frames and call dummy frames.
495 (ia64_frame_init_saved_regs): Handle signal handler frames.
496 (ia64_find_saved_register): Removed.
497 (ia64_get_saved_register): Handle call dummy frames; reorganized
498 to call generic_get_saved_register() to find registers saved
500 (process_note_abi_tag_sections): New static function.
501 (ia64_gdbarch_init): Attempt to determine the ABI/OS of the
502 executable. Based upon this information, set target dependent
503 field sigcontext_register_address appropriately. Also set
504 FRAME_CHAIN_VALID to be generic_func_frame_chain_valid.
505 * config/ia64/linux.mt (TDEPFILES): Add ia64-linux-tdep.o.
506 * config/ia64/tm-linux.h (IN_SIGTRAMP): Define.
507 (ia64_linux_in_sigtramp): New declaration.
509 2000-04-23 Eli Zaretskii <eliz@is.elta.co.il>
511 * TODO, NEWS: Update due to inclusion of gdbmi.texinfo in the GDB
514 2000-04-23 Eli Zaretskii <eliz@is.elta.co.il>
516 * config/djgpp/README: Explain how to unpack using djunpack.bat.
518 Fri Apr 21 15:23:13 2000 Andrew Cagney <cagney@b1.cygnus.com>
520 * stabsread.c (REG_STRUCT_HAS_ADDR): Delete default.
521 (define_symbol): Check REG_STRUCT_HAS_ADDR_P before using
523 (define_symbol): Ditto.
525 * valops.c (hand_function_call): Replace #ifdef
526 REG_STRUCT_HAS_ADDR with if REG_STRUCT_HAS_ADDR_P. Re-indent
529 * gdbarch.sh (REG_STRUCT_HAS_ADDR): Add along with the predicate
530 function REG_STRUCT_HAS_ADDR_P.
531 * gdbarch.h, gdbarch.c: Re-generate.
533 2000-04-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
535 * gdb-stabs.h (SECT_OFF_MAX): Increase to 40.
537 2000-04-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
539 * win32-nat.c (handle_load_dll): Don't treat .text as a special
541 * somread.c (som_symfile_offsets): Ditto.
542 * somsolib.c (som_solib_add_solib_objfile): Ditto.
544 Fri Apr 21 16:14:38 2000 Andrew Cagney <cagney@b1.cygnus.com>
546 * MAINTAINERS: Make Jimmy Guo TUI maintainer.
548 Fri Apr 21 14:37:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
550 * command.h (help_all): Delete declaration.
551 * command.c (help_all): Add declaration. Convert function
552 argument list to ISO-C.
554 Thu Apr 20 18:15:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
556 * d10v-tdep.c (d10v_gdbarch_init): Initialize stack_align.
557 (d10v_stack_align): Make static.
558 * config/d10v/tm-d10v.h (STACK_ALIGN): Delete.
560 Thu Apr 20 14:35:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
562 * valops.c (hand_function_call): Replace #ifdef STACK_ALIGN with
563 run-time test for STACK_ALIGN_P.
564 * gdbarch.sh: Add support for function and variable predicates.
565 (STACK_ALIGN): Add. Implement with predicate - STACK_ALIGN_P.
566 * gdbarch.h, gdbarch.c: Re-generate.
568 Thu Apr 20 17:39:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
570 * defs.h, utils.c (free_current_contents): Change parameter to
573 From Philippe De Muyter <phdm@macqel.be>:
574 * printcmd.c (print_address_symbolic): Call `make_cleanup' with
575 `(free_current_contents, &x)', not `(free, x)'.
576 * utils.c (free_current_contents): Do not `free (NULL)'.
578 * printcmd.c (print_address_symbolic): Cleanup after a failed
579 call to build_address_symbolic.
581 2000-04-20 Christopher Faylor <cgf@cygnus.com>
583 * wince-stub.c (FREE): New macro.
584 (mempool): Just free any buffer prior to reuse. Don't bother with
586 (flag_single_step): New function.
587 (skip_message): Detect "helpful" Windows CE messages and skip sending
589 (wait_for_debug_event): Use skip_message to avoid sending debug
590 messages to the host.
591 (dispatch): Prelimary implementation of single step detection.
592 * wince.c: Rework SH single stepping code to be more consistent with
594 (handle_output_debug_string): Allow first chance exceptions to come
595 through since they seem to be all that we get on some versions of
597 (check_for_step): New function, conditionally compiled based on target.
598 (regptr): Delete obsolete function.
599 (handle_exception): Detect illegal instructions.
600 (get_child_debug_event): Return success only if event code matches
602 (child_create_inferior): Reflect change to get_child_debug_event
605 2000-04-20 Christopher Faylor <cgf@cygnus.com>
607 * win32-nat.c (thread_rec): Be more defensive about suspending already
609 (safe_symbol_file_add_stub): New function.
610 (safe_symbole_file_add_cleanup): New function.
611 (safe_symbol_file_add): New function.
612 (handle_load_dll): Use wrapper to add DLL symbol information to avoid
613 bogus errors from non-stabs DLLs.
614 (handle_exception): Add work around for detection of first exception
615 breakpoint which does not seem to occur on W2K. Detect more "signals"
616 that can be effectively passed to the debuggee. Reorganize to eliminate
617 continue_status global.
618 (child_continue): Reorganize to eliminate continue_status global.
620 (child_resume): Ditto.
621 (get_child_debug_event): Ditto. Recognize when an a breakpoint
622 exception should be ignored. Change method for signalling when an
623 important event has occured to the caller.
624 (child_create_inferior): Use new method for noticing when
625 get_child_debug_event has found something interesting.
627 Fri Apr 7 13:44:38 2000 glen mccready <gkm@pobox.com>
629 * rs6000-nat.c (xcoff_relocate_symtab): Grow buffer if ptrace()
630 fails due to lack of space.
632 Fri Mar 24 12:10:38 2000 glen mccready <gkm@pobox.com>
634 * command.c, command.h (help_all): Add functionality to display
635 a complete listing of available commands.
637 2000-04-20 Scott Bambrough <scottb@netwinder.org>
639 * arm-linux-nat.c (PIDGET, TIDGET): New.
640 (get_thread_id, GET_THREAD_ID): New.
641 (fetch_nwfpe_register, store_nwfpe_register): New.
642 (fetch_register, store_register): New.
643 (fetch_fpregister, store_fpregister): New.
644 (fill_gregset, supply_gregset): New.
645 (fill_fpregset, supply_fpregset): New.
646 (fetch_fpregs): Modified to use thread id's.
647 (store_fpregs): Modified to use thread id's and
648 fetch_nwfpe_register.
649 (fetch_regs): Modified to use thread id's.
650 (store_regs): Modified to use thread id's.
651 (fetch_inferior_registers): Modified to handle single register
653 (store_inferior_registers): Modified to handle single register
655 (arm_linux_register_u_addr): Removed.
657 * configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
659 * config/arm/linux.mh
660 (NATDEPFILES): Removed core-aout.o. Added core-regset.o.
663 * config/arm/nm-linux.h: Include config/nm-linux.h.
664 (ATTACH_DETACH): Removed. Defined in config/nm-linux.h.
665 (REGISTER_U_ADDR): Removed.
666 (SVR4_SHARED_LIBS): Removed. Defined in config/nm-linux.h.
667 (#include "solib.h"): Removed. Included via config/nm-linux.h.
669 Thu Apr 20 18:54:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
671 From Daniel Berlin <dan@cgsoftware.com> and Tim Mooney
672 <mooney@dogbert.cc.ndsu.nodak.edu>:
673 * infrun.c (follow_fork_mode_kind_names): NULL terminate
675 (scheduler_enums): Ditto.
677 Mon Apr 17 13:37:10 2000 Andrew Cagney <cagney@b1.cygnus.com>
679 * gdbarch.sh: Make multi-arch variable defaults, defaults for non-
681 (TARGET_BFD_VMA_BIT, IEEE_FLOAT, CALL_DUMMY_WORDS,
682 SIZEOF_CALL_DUMMY_WORDS): Update.
684 * inferior.h (CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Default
686 (CALL_DUMMY_P): Add FIXME. gdbarch should provide default.
688 * valprint.c (IEEE_FLOAT): Default provided by gdbarch.
690 2000-04-19 Jim Blandy <jimb@redhat.com>
692 Bring RETURN_VALUE_ON_STACK under gdbarch's control.
693 * gdbarch.sh (RETURN_VALUE_ON_STACK): New entry.
694 * gdbarch.c, gdbarch.h: Regenerated.
695 * arch-utils.c (default_return_value_on_stack): New function.
696 * arch-utils.h (default_return_value_on_stack): New declaration.
697 * values.c (RETURN_VALUE_ON_STACK): Delete default definition.
699 * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
700 two-dimensional array, instead of faking it with explicit index
703 * minsyms.c (prim_record_minimal_symbol_and_info): Doc fix.
704 (Thanks to Guy Harris.)
706 2000-04-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
708 * xcoffsolib.c (solib_add): Fix call to vmap_symtab().
710 2000-04-19 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
714 Wed Apr 19 19:10:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
716 * TODO: Document -Wreturn-type problem.
718 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
720 * maint.c (_initialize_maint_cmds): Add `mt i' alias for `mt info'.
722 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
724 * infcmd.c (_initialize_infcmd): Add `info r' alias for
727 Wed Apr 19 17:03:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
729 From Philippe De Muyter <phdm@macqel.be>:
730 * bcache.c (free_bcache): Do not free NULL.
732 Wed Apr 19 16:37:47 2000 Andrew Cagney <cagney@b1.cygnus.com>
735 * NEWS: Update GDB version. Duplicate paragraph explaining
738 Wed Apr 19 13:06:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
740 * Makefile.in (distclean): Delete tui/Makefile.
741 * TODO: Add deletion of tui/Makefile.in to list.
743 2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
745 * symfile.h (struct section_addr_info ): Remove fields for special
746 treatment of .text, .data and .bss sections.
748 * solib.c (symbol_add_stub): The special field text_addr is not
749 available anymore. Search for the .text field the hard way.
751 * symfile.c (build_section_addr_info_from_section_table): Don't
752 fill in {text, data, bss}_addr any more.
753 (default_symfile_offsets): Don't use {text, data, bss}_addr fields
754 to fill in section_offsets for objfile.
755 (syms_from_objfile): Don't deal with {text, data, bss}_addr as a
756 special case anymore.
757 (add_symbol_file_command): Ditto.
759 2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
761 symfile.c: (symbol_file_command): Remove support for rombug, to
764 2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
766 * symfile.c (add_symbol_file_command): Rewrite the arguments
767 processing part. Simplify syntax of command. Remove support for
769 (_initialize_symfile): Update help message for add-symbol-file
772 Mon Apr 17 15:53:38 2000 Andrew Cagney <cagney@b1.cygnus.com>
774 * gdbarch.sh (IEEE_FLOAT): Only dump when defined.
775 * gdbarch.h, gdbarch.c: Re-generate.
777 Mon Apr 17 11:26:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
779 * remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
780 (MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
781 (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
782 gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
783 FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
784 REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
785 REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
786 ADDRESS_TO_POINTER): Delete default definition. Handled by
789 * gdbarch.sh: Make multi-arch defaults, defaults for non-
791 (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
792 REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
793 D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
794 MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
795 REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
796 Provide default/legacy implementation.
797 (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
798 * gdbarch.h, gdbarch.c: Re-generate.
800 2000-04-16 Jim Blandy <jimb@redhat.com>
802 * findvar.c (store_typed_address, extract_typed_address): Fix
803 function names in error messages.
805 2000-04-16 Eli Zaretskii <eliz@is.elta.co.il>
807 * config/djgpp/config.sed: Fix the lines which edit clean: and
808 uninstall-info: targets.
810 2000-04-14 Jim Blandy <jimb@redhat.com>
812 Bring IEEE_FLOAT under gdbarch's control.
813 * gdbarch.sh (IEEE_FLOAT): New entry.
814 * gdbarch.c, gdbarch.h: Regenerated.
815 * valprint.c (IEEE_FLOAT): Provide a default #definition for this.
816 (print_floating): Use IEEE_FLOAT as if it were an expression; use
817 the code specific to IEEE-format numbers whenever the value of
818 IEEE_FLOAT is non-zero.
819 * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
820 config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
821 config/h8300/tm-h8300.h, config/i386/tm-i386.h,
822 config/i960/tm-i960.h, config/m88k/tm-m88k.h,
823 config/mips/tm-mips.h, config/pa/tm-hppa.h,
824 config/sparc/tm-sparc.h, config/delta/tm-delta.h,
825 config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
826 IEEE_FLOAT, make sure they give it the value (1).
828 Provide the hooks needed to support architectures on which
829 pointers are not always simple byte addresses.
831 * gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
832 functions which architectures can redefine, defaulting to
833 generic_pointer_to_address and generic_address_to_pointer.
834 * findvar.c (extract_typed_address, store_typed_address,
835 generic_pointer_to_address, generic_address_to_pointer): New
837 (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
839 (extract_address, store_address): Doc fixes.
840 * values.c (value_as_pointer): Doc fix.
841 (value_from_pointer): New function.
842 * defs.h (extract_typed_address, store_typed_address): New
844 * inferior.h (generic_address_to_pointer,
845 generic_pointer_to_address): New declarations.
846 * value.h (value_from_pointer): New declaration.
848 The following changes are all of the general form "Use these
849 functions instead of these other functions." In each case, the
850 change is because the new calls provide enough information to do
851 the appropriate address / pointer conversions, where the old calls
852 did not, or because the new functions are more appropriately named
853 for the operation being performed.
855 * ax-gdb.c (const_var_ref): Use value_from_pointer, not
857 * blockframe.c (generic_push_dummy_frame): Use read_pc and
858 read_sp, not read_register.
859 * c-valprint.c (c_val_print): Use extract_typed_address instead of
860 extract_address to extract vtable entries and references.
861 * cp-valprint.c (cp_print_value_fields): Use value_from_pointer
862 instead of value_from_longest to extract the vtable's address.
863 * eval.c (evaluate_subexp_standard): Use value_from_pointer
864 instead of value_from_longest to compute `this', and for doing
865 pointer-to-member dereferencing.
866 * findvar.c (read_register): Use extract_unsigned_integer, not
868 (read_var_value): Use store_typed_address instead of store_address
869 for building label values.
870 (locate_var_value): Use value_from_pointer instead of
872 * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
873 instead of value_from_longest, to build arguments to __d_shl_get.
874 * printcmd.c (set_next_address): Use value_from_pointer, not
876 (x_command): Use value_from_pointer, not value_from_longest.
877 * tracepoint.c (set_traceframe_context): Use value_from_pointer,
878 not value_from_longest.
879 * valarith.c (value_add, value_sub): Use value_from_pointer, not
881 * valops.c (find_function_in_inferior, value_coerce_array,
882 value_coerce_function, value_addr, hand_function_call): Same.
883 * value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
884 * values.c (unpack_long): Use extract_typed_address to produce
885 addresses from pointers and references, not extract_address.
886 (value_from_longest): Use store_typed_address instead of
887 store_address to produce pointer and reference values.
889 2000-04-13 Mark Kettenis <kettenis@gnu.org>
891 * acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
892 HAVE_PSADDR_T): Add them here instead of in config.in.
894 * acconfig.h (PRFPREGSET_T_BROKEN): New define.
895 * configure.in: Add check for broken prfpregset_t type.
896 * lin-thread.c (gdb_prfpregset): New typedef, depends on
897 definition of PRFPREGSET_T_BROKEN.
898 (ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
899 p_td_thr_setfpregs, thread_db_fetch_registers,
900 thread_db_store_registers): Use gdb_prfpregset_t instead of
902 * config.in: Regenerated.
903 * configure: Regenerated.
905 2000-04-13 DJ Delorie <dj@cygnus.com>
907 * mips-tdep.c (do_fp_register_row): copy the number of bytes
908 allocated, not the size of the pointer.
910 2000-04-13 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
912 * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Define.
913 * config/i386/tm-i386sol2.h (HAVE_I387_REGS): Define.
914 * i386v4-nat.c (supply_fpregset, fill_fpregset): Add code
915 to handle floating point registers if NUM_FREGS is not zero.
917 2000-04-13 Nick Duffek <nsd@cygnus.com>
919 * sol-thread.c (init_sol_core_ops): Initialize to_thread_alive
920 and document to_find_new_threads bug.
922 2000-04-13 Eli Zaretskii <eliz@is.elta.co.il>
924 * infrun.c (proceed, normal_stop): Change the error message about
925 failure to insert breakpoints/watchpoints so that it makes sense
926 even if ptrace is not used or no other processes can be active.
928 Thu Apr 13 13:24:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
930 * configure.in: Add --enable-maintainer-mode.
931 * aclocal.m4, configure: Re-generate.
933 * Makefile.in ($(srcdir)/copying.c): Enable dependencies only when
934 on maintainer-mode. Update copying.c in source directory.
935 (copying.txt): Delete rule.
936 (copying.o): Add explict paths to $(srcdir) and explicit make
939 2000-04-12 Kevin Buettner <kevinb@redhat.com>
941 * ia64-linux-nat.c (IA64_PSR_DB, IA64_PSR_DD): Define.
942 (fetch_debug_register, fetch_debug_register_pair,
943 store_debug_register, store_debug_register_pair, is_power_of_2,
944 enable_watchpoints_in_psr, ia64_linux_insert_watchpoint,
945 ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
947 * config/ia64/nm-linux.h (TARGET_HAS_HARDWARE_WATCHPOINTS,
948 TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
949 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
950 target_remove_watchpoint): Define.
951 (ia64_linux_stopped_by_watchpoint, ia64_linux_insert_watchpoint,
952 ia64_linux_remove_watchpoint): Declare.
954 2000-04-12 Eli Zaretskii <eliz@is.elta.co.il>
956 * go32-nat.c (go32_insert_hw_breakpoint): When there are no more
957 hardware breakpoint resources, return EBUSY.
958 (go32_handle_nonaligned_watchpoint): If the argument WHAT is not
959 one of the enumerated values, return EINVAL.
961 2000-04-12 Eli Zaretskii <eliz@is.elta.co.il>
963 * README: Mention special build instructions for DJGPP.
964 * NEWS: Update with FP features on x87 platforms, and
965 DJGPP-related changes.
967 2000-04-12 Eli Zaretskii <eliz@is.elta.co.il>
969 * top.c (gdb_completer_file_name_break_characters): New variable.
970 (line_completion_function): When completing on file names, use
971 gdb_completer_file_name_break_characters as word break
972 characters for the readline library.
974 2000-04-12 Mark Kettenis <kettenis@gnu.org>
976 * i387-tdep.c (print_i387_value): Avoid call to
977 floatformat_to_doublest if long double type is the same on host
980 2000-04-11 Fernando Nasser <fnasser@cygnus.com>
982 * wrapper.h: Remove definitions of internal functions.
983 * wrapper.c: Remove definitions of exported functions (which are
984 already in wrapper.h) and make static all internal wrap_* functions.
986 Mon Apr 10 21:58:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
988 * acconfig.h (USE_INCLUDED_REGEX): Add.
989 * Makefile.in (REGEX_CFLAGS): Delete
990 * configure.in (REGEX_CFLAGS): Delete. Use AC_DEFINE instead.
991 * configure, config.in: Re-generate.
993 2000-04-10 Philip Blundell <philb@gnu.org>
995 * arm-linux-nat.c (arm_skip_solib_resolver): Remove and move to
997 * arm-linux-tdep.c (arm_skip_solib_resolver): New.
999 2000-04-10 Fernando Nasser <fnasser@cygnus.com>
1001 From 2000-04-10 Rodney Brown <rdb@redhat.com>:
1002 * command.h (enum command_class): Remove trailing "," to placate
1005 Mon Apr 10 20:17:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
1007 * TODO, NEWS: Update. Mention MI.
1009 Mon Apr 10 00:21:09 2000 Andrew Cagney <cagney@b1.cygnus.com>
1011 * gdbarch-utils.h, gdbarch-utils.c: Delete.
1012 * arch-utils.h, arch-utils.c: New files. Avoid 14 character file
1014 * Makefile.in: Update.
1015 * gdbarch.c: Update.
1017 Sun Apr 9 23:42:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
1019 From 2000-04-07 Jonathan Larmour <jlarmour@redhat.co.uk>:
1020 * mips-tdep.c (saved_gpreg_size_enums): Define enum command for
1021 new "set mips saved-gpreg-size" command
1022 (MIPS_SAVED_REGSIZE): Now a function mips_saved_regsize()
1023 (MIPS_DEFAULT_SAVED_REGSIZE): Define for default MIPS_SAVED_REGSIZE,
1024 either from target, or gdb multi-arch
1025 (show_mips_command): New. For "show mips" prefix command
1026 (set_mips_command): New. For "show mips" prefix command
1027 (_initialize_mips_tdep): Add top-level mips prefix command
1028 Add "set mips saved-gpreg-size" command
1030 * mips-tdep.c (struct gdbarch_tdep): Rename mips_saved_regsize to
1031 mips_default_saved_regsize.
1032 (mips_gdbarch_init): Update.
1033 (MIPS_DEFAULT_SAVED_REGSIZE): Update.
1034 (mips_gdbarch_init): Use MIPS_REGSIZE as the default value for
1035 mips_default_saved_regsize.
1037 Sun Apr 9 23:27:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
1039 From 2000-04-07 J.T. Conklin <jtc@redback.com>:
1040 * lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
1041 replace calls to target_xfer_memory() with target_read_memory()
1042 and target_write_memory().
1044 Sun Apr 9 22:54:29 2000 Andrew Cagney <cagney@b1.cygnus.com>
1046 * valops.c (value_rtti_type): Compare VALUE_ADDRESS with ``0'' not
1047 NULL. Macro returns a CORE_ADDR.
1049 2000-04-08 Jim Blandy <jimb@redhat.com>
1051 * dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
1052 Don't include "bfd-elf.h".
1053 (address_significant_size): Delete variable.
1054 (dwarf2_build_psymtabs_hard): Don't set it, or check for
1055 consistency between it and the Dwarf 2 compilation unit header
1057 (read_address): Don't mask off bits above
1058 address_significant_size.
1059 * Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
1060 (elf_bfd_h): Remove variable; it's no longer used.
1062 2000-04-08 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1064 * configure.in (NEW_PROC_API): Escape square brackets when testing
1066 * configure: Regenerate.
1068 2000-04-07 Scott Bambrough <scottb@netwinder.org>
1070 * ChangeLog: Correct date on last entry.
1071 * arm-linux-tdep.c (arm_linux_push_arguments): New function.
1072 * config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
1073 * config/arm/tm-embed: Fix build warning from redefinition of
1075 * config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
1076 * config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
1077 TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
1078 override default in tm-arm.h. Use default target byte order
1081 2000-04-07 Scott Bambrough <scottb@netwinder.org>
1083 * Makefile.in: Add dependency information for arm-linux-tdep.c.
1084 * config/djgpp/fnchange.lst: Add arm-linux-tdep.c, arm-linux-nat.c.
1086 2000-04-07 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1088 * sol-thread.c (gdb_ps_addr_t): New typedef, depends on definition
1089 of PROC_SERVICE_IS_OLD.
1090 (ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
1091 rw_common): Change argument type from psaddr_t to gdb_ps_addr_t.
1093 Fri Apr 7 17:18:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
1095 * Makefile.in (CFLAGS): Set using configure.
1097 * configure.in (WARN_CFLAGS): Enable by default when GCC.
1098 * configure: Re-generate.
1100 Fri Apr 7 13:33:43 2000 Andrew Cagney <cagney@b1.cygnus.com>
1102 From 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1103 * procfs.c (init_procfs_ops): Set procfs_ops.to_has_memory and
1104 procfs_ops.to_has_all_memory to 1.
1108 2000-04-06 Nick Duffek <nsd@cygnus.com>
1110 * configure.in (_MSE_INT_H): Define on Solaris 7.
1111 (NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
1112 * acconfig.h (_MSE_INT_H): Define on Solaris 7.
1113 * configure: Regenerate.
1114 * config.in: Regenerate.
1116 2000-04-06 Michael Snyder <msnyder@cygnus.com>
1118 * sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
1119 Change to rely on PIDGET etc.
1120 * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
1121 TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
1122 STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
1123 define. Allow target to use procfs hardware watchpoints.
1124 * config/sparc/nm-sun4sol2.h: ditto.
1125 * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
1126 definitions to use 16 bits for the pid, 15 bits for the tid, and
1128 * config/sparc/tm-sun4sol2.h: ditto.
1129 (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
1130 * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
1131 for more than 15 thread increments.
1133 2000-04-06 Eli Zaretskii <eliz@is.elta.co.il>
1135 * top.c (filename_completer): Set subsequent_name to 1 early on,
1136 to prevent an infinite loop if the first file in the directory is
1137 a backup file (whose name ends in a `~').
1139 2000-04-05 Jim Blandy <jimb@redhat.com>
1141 * solib.c (update_solib_list): New function.
1142 (solib_add): Call update_solib_list, and then read symbols.
1143 (info_sharedlibrary_command): Call update_solib_list, not
1146 2000-04-05 Scott Bambrough <scottb@netwinder.org>
1148 * arm-linux-tdep.c: Resolve implicit function declarations by
1149 including target.h and value.h. Inclusion of symtab.h is
1152 2000-04-05 Scott Bambrough <scottb@netwinder.org>
1154 * arm-linux-tdep.c: New file.
1155 * arm-linux-nat.c (fetch_fpregs): Remove unused code.
1156 (arm_get_longjmp_target): Moved it and all defines
1157 it uses to arm-linux-tdep.c.
1158 (arm_linux_extract_return_value): Moved to
1160 * config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
1162 2000-04-04 Nick Duffek <nsd@cygnus.com>
1164 * infrun.c (handle_inferior_event): Call target_mourn_inferior
1165 instead of kill_target.
1167 2000-04-04 Daniel Berlin <dan@cgsoftware.com>
1169 * TODO: Make note of various C++ things i have planned for 5.1.
1171 Tue Apr 4 12:13:19 2000 Andrew Cagney <cagney@b1.cygnus.com>
1173 * printcmd.c (print_scalar_formatted): Use local variable ptr_bit
1174 in shift. Stop GCC thinking it has a shift overflow.
1176 2000-04-03 H.J. Lu <hjl@gnu.org>
1178 * TODO: Remove the regex entry.
1180 2000-04-03 H.J. Lu <hjl@gnu.org>
1182 * gdb_regex.h: New. Include "regex.h" if USE_INCLUDED_REGEX
1183 is defined and <regex.h> otherwise.
1185 * irix5-nat.c: Include "gdb_regex.h" instead of "gnu-regex.h".
1186 * monitor.c: Likewise.
1187 * osfsolib.c: Likewise.
1188 * solib.c: Likewise.
1189 * source.c: Likewise.
1190 * symtab.c: Likewise.
1192 * Makefile.in (REGEX): Changed to @REGEX@.
1193 (REGEX_CFLAGS): New.
1195 (ADD_DEPS): Use $(REGEX) instead of $(REGEX1).
1196 (INTERNAL_WARN_CFLAGS): Add $(REGEX_CFLAGS).
1198 * configure.in (--with-included-regex): New switch.
1199 (REGEX): New. Subsstitue @REGEX@ in Makefile.in.
1200 (REGEX_CFLAGS): New. Subsstitue @REGEX_CFLAGS@ in Makefile.in.
1201 * configure: Regenerated.
1203 2000-04-03 Kevin Buettner <kevinb@redhat.com>
1205 * NEWS (powerpc-*-linux*): Mention.
1207 2000-04-03 J.T. Conklin <jtc@redback.com>
1209 * config/i386/xm-nbsd.h (HOST_LONG_DOUBLE_FORMAT): Define.
1211 2000-04-03 Kevin Buettner <kevinb@redhat.com>
1213 * Makefile.in (ALLDEPFILES): Add ia64-linux-nat.c and ia64-tdep.c.
1214 (ia64-linux-nat.o, ia64-tdep.o): Add dependencies.
1216 * ia64-linux-nat.c (fill_gregset): Implement.
1217 (supply_fpregset, fill_fpregset): New functions.
1219 * ia64-tdep.c (ia64_init_extra_frame_info): Revise manner in
1220 which the CFM is fetched for certain frames.
1221 (find_global_pointer, find_extant_func_descr): Don't use
1222 partial symtabs for locating sections.
1224 * config/ia64/linux.mh (LOADLIBES): Define.
1225 (NATDEPFILES): Add linux-thread.o and lin-thread.o.
1226 * config/ia64/nm-linux.h (nm-linux.h): Include this upper-level
1227 file containing generic linux declarations/definitions.
1228 (SVR4_SHARED_LIBS, ATTACH_DETACH): Remove defines; already
1229 defined in generic nm-linux.h.
1230 (solib.h): Remove include; already included in generic nm-linux.h.
1232 2000-04-03 Jim Blandy <jimb@redhat.com>
1234 * solib.c (solib_add): Move all the code for loading symbol tables
1235 below the code to sort out additions and removals. That way, we
1236 always catch all loaded shared libraries whose symbols we haven't
1239 * solib.c (solib_add): Don't try to free a shared object's objfile
1240 if it doesn't have one. Duh.
1242 * solib.c (solib_add): If a pattern was given, but it doesn't
1243 match any currently loaded shared libraries, print a message;
1244 don't just be silent.
1246 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1248 * go32-nat.c (go32_handle_nonaligned_watchpoint): Use a
1249 two-dimensional array instead of faking it with index
1252 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1254 * config/i386/xm-go32.h (HOST_LONG_DOUBLE_FORMAT): Define.
1256 * config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
1257 definition (and use the common one in tm-i386.h).
1258 (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
1259 (I386_DJGPP_TARGET): Don't define, it's no longer required.
1260 (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
1261 i386-tdep.c defines it for all x86 targets.
1262 (LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
1264 * config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
1266 * config/djgpp/djcheck.sh: Edit the copyright year out of the test
1267 results. Fix editing of `main' arguments for non-GNU Sed.
1269 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1271 * symfile.c (map_overlay_command, unmap_overlay_command): Fix
1272 error message: there's no "overlay on" command.
1274 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1276 * Makefile.in (copying.c): Depend on copying.txt, not COPYING.
1277 (copying.txt): New target, a link to COPYING.
1279 Mon Apr 3 18:20:03 2000 Andrew Cagney <cagney@b1.cygnus.com>
1283 Mon Apr 3 14:56:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
1286 (set_hook, error_hook): Remove PARAMS.
1288 Mon Apr 3 14:45:25 2000 Andrew Cagney <cagney@b1.cygnus.com>
1290 * symtab.h (add_minsym_to_demangled_hash_table): Revert 2000-03-29
1291 Daniel Berlin <dan@cgsoftware.com>. Function was static.
1292 * minsyms.c (add_minsym_to_demangled_hash_table): Add prototype.
1294 Mon Apr 3 14:10:37 2000 Andrew Cagney <cagney@b1.cygnus.com>
1296 * gdb-events.h, gdb-events.c, gdb-events.sh: Re-indent.
1298 2000-04-02 Nick Duffek <nsd@cygnus.com>
1300 * gdbtypes.c (safe_parse_type): New wrapper function to ignore
1301 error() during parse_and_eval_type().
1302 (check_stub_method): Call safe_parse_type instead of
1303 parse_and_eval_type().
1304 * wrapper.c (gdb_parse_and_eval_type): New wrapper function.
1305 (wrap_parse_and_eval_type): New support function.
1306 * wrapper.h (gdb_parse_and_eval_type): Prototype.
1307 (wrap_parse_and_eval_type): Prototype.
1309 Sun Apr 2 10:32:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1311 * MAINTAINERS: Eli Zaretskii is a doco maintainer.
1313 Fri Mar 31 08:59:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
1315 * gdbarch-utils.h, gdbarch-utils.c: New files.
1316 * Makefile.in (SFILES, COMMON_OBS): Update.
1317 (gdbarch_utils_h) Define.
1318 (gdbarch-utils.o): Add dependencies.
1320 * gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
1321 handling default method values.
1322 (startup_gdbarch): Rename default_gdbarch, name misleading.
1323 (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
1324 (register_name): Default to legacy_register_name.
1325 (call_dummy_words): Default to legacy_call_dummy_words.
1326 (sizeof_call_dummy_words): Default to
1327 legacy_sizeof_call_dummy_words.
1328 (register_convertible): Default to
1329 generic_register_convertible_not.
1330 (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
1331 (remote_translate_xfer_address): Default to
1332 generic_remote_translate_xfer_address.
1333 (frameless_function_invocation): Default to
1334 generic_frameless_function_invocation_not.
1336 2000-04-02 Mark Kettenis <kettenis@gnu.org>
1338 * i386-linux-nat.c: Add copyright notice.
1340 * config/i386/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define as
1341 &floatformat_i387_ext.
1342 * config/i386/xm-i386gnu.h (HOST_LONG_DOUBLE_FORMAT): Likewise.
1344 2000-03-29 Mark Kettenis <kettenis@gnu.org>
1346 * findvar.c (extract_floating): Remove reference to
1347 TARGET_EXTRACT_FLOATING.
1348 (store_floating): Remove reference to TARGET_STORE_FLOATING.
1350 2000-03-30 Fernando Nasser <fnasser@cygnus.com>
1352 * wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
1353 Safe version of value_subscript.
1354 * varobj.c (): Use gdb_value_subscript() to get an array element value.
1356 2000-03-30 Michael Snyder <msnyder@cleaver.cygnus.com>
1358 * ui-file.c: Include "gdb_string.h"
1359 * cli-out.c: Include gdb_string.h to avoid compiler warnings.
1360 * wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into
1361 unions, since they are all used to hold both pointers and ints
1362 at various times. Casting pointer to int and vice versa gives
1363 warnings (and is not safe) if they are not the same size.
1365 2000-03-30 Michael Snyder <msnyder@cleaver.cygnus.com>
1367 * defs.h (struct continuation_arg): Make 'data' a union, to avoid
1368 casting problems when int and pointer are not the same size.
1369 * event-top.c (command_handler): Use data as a union.
1370 (command_line_handler_continuation): Ditto.
1371 * infcmd.c (step_1_continuation): Use data as a union. Re-indent.
1372 (step_once): ditto. (finish_command_continuation): Ditto.
1373 (finish_command): Ditto.
1374 * breakpoint.c (until_break_command): Use data as a union.
1375 (until_break_command_continuation): Ditto.
1376 * utils.c (add_intermediate_continuation): Fix typo in comment.
1378 Thu Mar 30 12:09:50 2000 Andrew Cagney <cagney@b1.cygnus.com>
1380 * gdbarch.h, gdbarch.c: Re-indent. Remove FIXMEs.
1381 * gdbarch.sh: Re-sync with gdbarch.[hc].
1383 2000-03-29 Daniel Berlin <dan@cgsoftware.com>
1385 * minsyms.c (add_minsym_to_demangled_hash_table): New function.
1386 (install_minimal_symbols): Fix demangled symbol problems caused by
1387 using add_minsym_to_hash_table for the demangled names, which is
1388 wrong. Now we use add_minsym_to_demangled_hash_table.
1389 (lookup_minimal_symbol): Fix problems with demangled symbol lookup
1390 caused by weird control flow.
1391 * symtab.h: Add add_minsym_to_demangled_hash_table prototype here.
1393 2000-03-29 Jason Merrill <jason@casey.cygnus.com>
1395 * configure.in: -linux-gnu*, not -linux-gnu.
1397 Tue Mar 28 18:28:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
1399 * remote.c (remote_threads_extra_info): Replace qfThreadExtraInfo
1400 with qThreadExtraInfo.
1402 2000-03-29 J.T. Conklin <jtc@redback.com>
1404 * i386nbsd-nat.c (fetch_core_registers): Make static.
1406 * m68knbsd-nat.c (fetch_core_registers): Make static.
1407 (m68knbsd_core_fns, _initialize_m68knbsd_nat): Added.
1409 Wed Mar 29 13:40:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
1411 * TODO: Update GDB 5 status.
1413 Wed Mar 29 10:16:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
1415 * breakpoint.h (remove_hw_watchpoints): Add declaration.
1416 * breakpoints.c (remove_hw_watchpoints): Update.
1417 * maint.c (maintenance_do_deprecate): Avoid assignment within IF
1420 2000-03-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1422 breakpoint.c, breakpoint.h (remove_hw_watchpoints): New function.
1423 infrun.c (resume): Remove hardware watchpoints before stepping
1424 when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
1426 2000-03-28 Michael Snyder <msnyder@cleaver.cygnus.com>
1428 * Makefile.in: Anchor tui-file.h dependency to $srcdir.
1430 2000-03-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1432 * procfs.c (proc_set_watchpoint): Declare addr parameter as
1433 CORE_ADDR, to match call from procfs_set_watchpoint.
1435 * breakpoint.c (insert_breakpoints, do_enable_breakpoint):
1436 Reselect the saved frame silently after frame selection for
1437 watchpoint evaluation.
1438 (insert_breakpoints): Add missing space in `Hardware watchpoint
1439 deleted' message. Do not reinsert hardware watchpoint if it is
1440 already marked for deletion at next stop.
1442 2000-03-28 Christopher Faylor <cgf@cygnus.com>
1444 * partial-stab.h: Add one more check against corrupted or irregular
1447 Tue Mar 28 12:23:37 2000 Philippe De Muyter <phdm@macqel.be>
1449 * gnu-regex.c (regerror): Function renamed from `__regerror'.
1450 (Change also approved in the mainline glibc sources)
1452 Tue Mar 28 18:19:50 2000 Andrew Cagney <cagney@b1.cygnus.com>
1454 From 2000-03-20 Jonathan Larmour <jlarmour@redhat.co.uk>:
1455 * ser-unix.c (do_unix_readchar): Reorganise to be more robust,
1456 particularly ensuring it can't return SERIAL_TIMEOUT when told
1459 2000-03-24 Daniel Berlin <dan@cgsoftware.com>
1461 * gdbtypes.c (_initialize_gdbtypes): Add "set debug overload",
1462 which never existed before, and thus, has no deprecated old command.
1464 * gdbarch.c (_initialize_gdbarch): Add "set debug arch", deprecate
1465 "set archdebug" (same goes for the show commands).
1466 * gdb-events.c (_initialize_gdb_events): Add "set debug event",
1467 deprecate "set eventdebug" (same goes for the show commands).
1468 * gdbcmd.h: Add the setdebuglist and showdebuglist externs.
1469 * top.c (init_main): Deprecate remotedebug, use "set/show debug remote"
1471 x(init_main): Add the "set debug" and "show debug" commands.
1472 Add setdebuglist and showdebuglist.
1474 Fri Mar 24 13:00:10 2000 Daniel Berlin <dan@cgsoftware.com>
1476 * maint.c (maintenance_do_deprecate): Fix crash if you call with no arguments, and fixed the warning.
1477 Added prototype for the deprecate command so it doesn't complain.
1479 Tue Mar 28 11:52:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
1481 * top.c (print_gdb_version): Bump copyright year to 2000.
1483 Tue Mar 28 10:13:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
1485 * MAINTAINERS: Add Glen McCready to write after approval list.
1487 Tue Mar 28 09:59:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
1489 * acconfig.h: Fix typo in comment describing HAVE_PTRACE_GETREGS.
1490 * config.h: Regenerate.
1492 Mon Mar 27 19:53:29 2000 Andrew Cagney <cagney@b1.cygnus.com>
1494 * TODO: Update. Add criteria for next release of GDB.
1496 Mon Mar 27 17:20:25 2000 Andrew Cagney <cagney@b1.cygnus.com>
1498 * acconfig.h: Provide default for HAVE_PTRACE_GETREGS.
1499 * config.h: Regenerate.
1501 Mon Mar 27 16:43:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
1503 * Makefile.in (install-only): Create $(bindir) and $(man1dir)
1504 before installing GDB.
1506 Mon Mar 27 16:26:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
1508 * Makefile.in (all-gdbtk): Check for an existing link/directory.
1509 Re-format warning message. Document that post 5.0 this can be
1512 Mon Mar 27 14:46:37 2000 Andrew Cagney <cagney@b1.cygnus.com>
1514 * ChangeLog: Revert whitespace changes.
1516 Mon Mar 27 10:20:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1518 * MAINTAINERS: Update folks who need accounts.
1520 Mon Mar 27 09:29:14 2000 Andrew Cagney <cagney@b1.cygnus.com>
1522 * MAINTAINERS: J.T. Conklin is NetBSD maintainer.
1524 2000-03-27 Mark Kettenis <kettenis@gnu.org>
1526 * config/i386/tm-i386.h: Fix typo. It is TARGET_LONG_DOUBLE_BIT
1527 instead of TARGET_LONG_DOUBLE_BITS.
1528 * config/i386/tm-i386mk.h: Likewise.
1530 2000-03-26 Mark Kettenis <kettenis@gnu.org>
1532 Provide `long double' support for most i386 targets.
1533 * config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT): Define as
1534 &floatformat_i387_ext.
1535 (TARGET_LONG_DOUBLE_BITS): Define as 96.
1536 (REGISTER_VIRTUAL_TYPE): Change type for FPU registers to
1537 `builtin_type_long_double'.
1538 (REGISTER_CONVERT_TO_VIRTUAL): Call
1539 i386_register_convert_to_virtual.
1540 (REGISTER_CONVERT_TO_RAW): Call i386_register_convert_to_raw.
1541 (i387_to_double, double_to_i387): Remove prototypes.
1542 (i386_extract_return_value): Change prototype to match definition
1544 * config/i386/tm-i386mk.h (TARGET_LONG_DOUBLE_FORMAT): #undef.
1545 (TARGET_LONG_DOUBLE_BITS): #undef.
1546 * config/i386/tm-linux.h (TARGET_LONG_DOUBLE_BIT): Remove.
1547 [HAVE_LONG_DOUBLE && HOST_I386] (LD_I387): Remove.
1548 (i387_extract_floating, i387_store_floating): Remove prototypes.
1549 (TARGET_EXTRACT_FLOATING, TARGET_STORE_FLOATING): Remove.
1550 (REGISTER_CONVERT_TO_VIRTUAL, REGOISTER_CONVERT_TO_RAW): Remove.
1551 (REGISTER_VIRTUAL_TYPE): Remove.
1552 * i386-tdep.c (i386_register_convert_to_virtual): New function.
1553 (i386_register_convert_to_raw): New function.
1554 * i387-tdep.c [LD_I387] (i387_extract_floating): Remove.
1555 (i387_store_floating): Remove.
1557 Sat Mar 25 18:55:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
1559 * maint.c: Re-indent.
1561 Sat Mar 25 18:51:50 2000 Andrew Cagney <cagney@b1.cygnus.com>
1563 * maint.c (_initialize_maint_cmds): Remove quoted trailing space.
1565 2000-03-24 Christopher Faylor <cgf@cygnus.com>
1567 * config/mips/tm-wince.h: Fix typo which caused include of tm-mips.h to
1570 2000-03-24 Christopher Faylor <cgf@cygnus.com>
1572 * win32-nat.c: Back out special frame walking code. It was broken.
1573 (handle_exception): Correctly identify an illegal instruction.
1574 * config/tm-cygwin.h: Eliminate special frame handling. Just use
1575 normal i386 handling.
1577 2000-03-24 J.T. Conklin <jtc@redback.com>
1579 * i386/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
1580 * i386nbsd-nat.c (i386nbsd_use_struct_convention): New function.
1581 (fetch_core_registers): Read fp registers.
1582 (i386nbsd_core_fns, _initialize_i386nbsd_nat): Added.
1584 2000-03-24 Jonathan Larmour <jlarmour@redhat.co.uk>
1586 * arm-tdep.c (thumb_skip_prologue): Take function end addr argument
1587 so that we can stop searching for the prologue past the function end
1588 (arm_skip_prologue): Call thumb_skip_prologue with function end addr
1590 2000-03-24 Kevin Buettner <kevinb@redhat.com>
1592 * linux-thread.c, lin-thread.c (save_inferior_pid,
1593 restore_inferior_pid): Don't do compile time comparison
1594 of TARGET_PTR_BIT and TARGET_INT_BIT.
1596 Thu Mar 23 13:18:26 2000 Philippe De Muyter <phdm@macqel.be>
1598 * m68k-tdep.c (P_LINKL_FP, P_LINKW_FP): Macros renamed from P_LINK_L
1600 (P_PEA_FP, P_MOVL_SP_FP): New macros.
1601 (P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
1603 (altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
1605 (delta68_in_sigtramp): New function.
1606 (delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
1607 (m68k_skip_prologue): Use P_* macros, not hex constants.
1608 (m68k_find_saved_regs): Do not expect a fixed sequence of register save
1609 instructions, but accept them in any order; use P_* macros, not octal
1610 or hex constants; recognize also `fmovemx to (fp + displacement)' and
1611 `moveml to (fp + displacement)'.
1612 * m68/tm-delta68.h (IN_SIGTRAMP): New macro.
1613 (FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
1615 Fri Mar 24 13:44:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
1617 * MAINTAINERS: Add Fernando Nasser to testsuite maintainers.
1619 2000-03-23 Michael Snyder <msnyder@cleaver.cygnus.com>
1621 * solib.c (open_symbol_file_object): To sneak an int argument
1622 past catch_errors, instead of casting it to a pointer, simply
1625 2000-03-23 Jimmy Guo <guo@cup.hp.com>
1627 * gdbtypes.c (rank_function): Rank all N parameters and use correct
1628 index into the prams[] and args[] arrays.
1630 2000-03-23 Fernando Nasser <fnasser@cygnus.com>
1632 From David Whedon <dwhedon@gordian.com>
1634 * top.c (execute_command): Checks all commands beore executing
1635 to see if the user needs to be warned that the command is
1636 deprecated, warns user if appropriate.
1637 (add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
1638 return values from void to struct cmd_list_element *.
1639 * command.c (lookup_cmd_1): Check aliases before following link
1640 in case user needs to be warned about a deprecated alias.
1641 (deprecate_cmd): new exported function for command deprecation,
1642 sets flags and posibly a replacement string.
1643 (deprecated_cmd_warning): New exported funciton to warn user about
1644 a deprecated command.
1645 (lookup_cmd_composition): New exported function that determines
1646 alias, prefix_command, and cmd based on a string. This is useful
1647 is we want to full name of a command.
1648 * command.h : Added prototypes for deprecate_cmd,
1649 deprecated_warn_user and lookup_cmd_composition, added flags to
1650 the cmd_list_element structure, changed return values for
1651 add_com_* and add_info_* from void to cmd_list_element.
1652 * maint.c : (maintenance_deprecate): New function to deprecate a
1653 command. This exists only so that the testsuite can deprecate
1654 commands at runtime and check the warning behavior.
1655 (maintenance_undeprecate) : New function, drops deprecated flags.
1656 (maintenance_do_deprecate): Actually does the (un)deprecation.
1657 (initialize_maint_cmds): Added the above new deprecate commands.
1659 2000-03-22 Daniel Berlin <dan@cgsoftware.com>
1660 * command.c (apropos_cmd_helper): New function, meat of the
1662 (apropos_command): New apropos command to search command
1663 names/documentation for regular expressions.
1664 (_initialize_command): Add the apropos command.
1666 2000-03-23 Michael Snyder <msnyder@cleaver.cygnus.com>
1668 * sol-thread.c (ps_pglobal_lookup): Change argument type from
1669 paddr_t to psaddr_t. This mistake appears to date from an
1670 erroneous man page in Solaris 2.5 -- the correct type from the
1671 system headers has always been psaddr_t.
1672 (ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Ditto.
1675 2000-03-22 Kevin Buettner <kevinb@redhat.com>
1677 * ia64-linux-nat.c: Fix copyright.
1678 (fill_gregset): Minor formatting fix.
1679 * ia64-tdep.c (template_encoding_table, fetch_instruction,
1680 examine_prologue): Clean up some compiler warnings.
1681 (is_float_or_hfa_type_recurse, is_float_or_hfa_type, find_func_descr,
1682 find_global_pointer, find_extant_func_descr): New functions.
1683 (ia64_use_struct_convention, ia64_extract_return_value,
1684 ia64_push_arguments): Handle HFAs.
1685 (ia64_push_arguments): Find (or build) a function descriptor
1686 when given a function address.
1687 (ia64_push_return_address): Moved code for finding the
1688 global pointer into its own function, find_global_pointer ().
1690 2000-03-22 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1692 * event-loop.c (handle_file_event): Run through indent.
1694 2000-03-22 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1696 From Philippe De Muyter <phdm@macqel.be>
1698 * event-loop.c (sys/types.h): File now included unconditionally.
1699 (use_poll): New variable..
1700 (gdb_notifier): poll- and select-versions merged.
1701 (add_file_handler): If HAVE_POLL, check whether poll is usable,
1702 and reset `use_poll' if not.
1703 (create_file_handler): Select poll- or select-version according to
1705 (delete_file_handler, handle_file_event): Likewise.
1706 (gdb_wait_for_event, poll_timers): Likewise.
1708 2000-03-22 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1710 * printcmd.c (print_scalar_formatted): Truncate addresses to the
1711 size of a target pointer before passing them to print_address.
1713 2000-03-22 Mark Kettenis <kettenis@gnu.org>
1715 * config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
1716 * config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
1718 * i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
1719 (i386_extract_return_value): Rewritten. Correctly support all
1720 floating-point types and large integer types on targets that use
1721 the standard i386 GDB register layout and return floating-point
1724 Wed Mar 22 15:09:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1726 * configure.in (CONFIG_INITS): Do not append remote-nrom.c
1728 2000-03-21 J.T. Conklin <jtc@redback.com>
1730 * i386/nbsd.mh (NATDEPFILES): Change i386b-nat.o to i386nbsd-nat.o.
1731 * i386nbsd-nat.c: New file.
1733 * i386/tm-nbsd.h (NUM_REGS): Removed.
1734 (HAVE_I387_REGS): Defined.
1735 * i386/nm-nbsd.h (FLOAT_INFO): Removed.
1737 * tm-nbsd.h (IN_SOLIB_CALL_TRAMPOLINE): Define if not
1740 Wed Mar 22 11:18:59 2000 Andrew Cagney <cagney@b1.cygnus.com>
1742 * MAINTAINERS: Add Jim Blandy to breakpoint maintainers. David
1743 taylor is the Solaris/SPARC maintainer. Add Jonathan Larmour to
1744 the write after approval list.
1746 2000-03-21 Kevin Buettner <kevinb@redhat.com>
1748 * symtab.h (MAX_SECTIONS, struct section_addr_info,
1749 symbol_file_add): Move declarations from here...
1750 * symfile.h: ...to here.
1752 * solib.c (symbol_add_stub): Make symbol_file_add () aware of
1753 all section addresses, not just .text.
1754 * symfile.h, symfile.c (free_section_addr_info,
1755 build_section_addr_info_from_section_table): New functions.
1757 * symfile.h (MAX_SECTIONS): Increase value to 40.
1758 * symfile.c (syms_from_objfile): Add bounds check prior to
1759 accessing ``other'' array in a section_addr_info_struct.
1760 Remove unused variable section_offsets.
1761 (add_symbol_file_command): Remove unused variable text_addr.
1763 2000-03-21 Eli Zaretskii <eliz@is.elta.co.il>
1765 * breakpoint.c (bpstat_stop_status): Don't stop if a read
1766 watchpoint appears to break, but the watched value changed.
1768 2000-03-21 Jim Blandy <jimb@redhat.com>
1770 * gdbarch.sh: Emit a definition and declaration for gdbarch_free,
1771 a companion to gdbarch_alloc, which allows a gdbarch init function
1772 to free partially-built gdbarch structures.
1773 * gdbarch.c, gdbarch.h: Regenerated.
1775 2000-03-20 Kevin Buettner <kevinb@redhat.com>
1777 * configure.host, configure.tgt (ia64-*-linux*): New entry.
1779 * gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
1780 initialize_arch): Define for IA-64.
1781 (initialize_arch): Add declaration.
1783 2000-03-20 Eli Zaretskii <eliz@is.elta.co.il>
1785 * breakpoint.c (insert_breakpoints, remove_breakpoint)
1786 (bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
1787 remove, or check status of hardware watchpoints for entire structs
1788 and arrays unless the user explicitly asked to watch that struct
1790 (insert_breakpoints): Try to insert watchpoints for all the values
1791 on the value chain, even if some of them fail to insert.
1793 * values.c (value_primitive_field): Set the offset in struct value
1794 we return when the field is a packed bitfield.
1796 2000-03-20 Michael Snyder <msnyder@cleaver.cygnus.com>
1798 * remote.c (remote_threads_extra_info): New function.
1799 Implement the extra thread info query for "info threads".
1800 (remote_threads_info): Clean up a bit.
1801 (use_threadinfo_query, use_threadextra_query): New variables.
1802 Control whether GDB will use the new or old protocol for
1803 thread info queries.
1804 (remote_open_1): Initialize new variables.
1805 (remote_async_open_1): Ditto.
1806 (remote_cisco_open): Ditto.
1808 2000-03-20 Kevin Buettner <kevinb@redhat.com>
1810 * ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
1811 config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
1812 config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.
1814 2000-03-20 Kevin Buettner <kevinb@redhat.com>
1816 * utils.c (floatformat_from_doublest): Don't assume that a long
1817 will be exactly 32 bits in length. Also... make sure space
1818 that we're writing the float to is completely initialized to
1819 zeroes, even when the number of bits in the float is not
1820 evenly divisible by FLOATFORMAT_CHAR_BIT.
1822 2000-03-20 Jim Blandy <jimb@redhat.com>
1824 * i386-linux-nat.c: No need to #include "frame.h" any more.
1825 (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1826 LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1827 LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1828 LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1829 LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1830 LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1831 linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1832 i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1833 i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1834 i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1835 i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
1836 out that these are target-dependent, and useful in non-native
1837 configurations. Moved to...
1838 * i386-linux-tdep.c: ... Here, a new file.
1839 * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
1840 (i386-linux-tdep.o): New rule.
1841 (i386-linux-nat.o): We no longer depend on frame.h.
1842 * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
1844 2000-03-04 Eli Zaretskii <eliz@is.elta.co.il>
1846 * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
1847 Print an error at compile time if we are to use select, but FD_SET
1849 (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
1850 if HAVE_POLL is not defined and NO_FD_SET *is* defined.
1851 (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
1852 (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
1853 (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
1854 instead of using memcpy and memset. Use FD_ISSET.
1856 * config/i386/xm-go32.h (fd_mask): Remove typedef.
1858 Mon Mar 20 19:58:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
1860 * command.c (_initialize_command): Document requirements for ``!''
1863 Mon Mar 20 18:12:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
1865 From Fri 10 Mar 2000 Robert
1866 <robert.melchers@drives.eurotherm.co.uk>:
1867 * sh-tdep.c (sh_processor_type_table): Add entry for sh2.
1869 Mon Mar 20 17:33:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
1871 From Thu Mar 16 16:49:27 EST 2000 John David Anglin
1872 <dave@hiauly1.hia.nrc.ca>:
1873 * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
1874 _initialize_hpux_thread being called twice.
1875 * configure: Regenerated.
1877 2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
1879 * event-top.c (_initialize_event_loop): If instream is not
1880 connected to a terminal device, turn editing off.
1882 2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
1884 Support for building GDB with DJGPP, and running the test suite on
1886 * config/djgpp/djconfig.sh: New file.
1887 * config/djgpp/config.sed: New file.
1888 * config/djgpp/README: New file.
1889 * config/djgpp/fnchange.lst: New file.
1890 * config/djgpp/djcheck.sh: New file.
1892 2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
1894 * ser-go32.c (ports): Make the initializers complete, to pacify
1897 2000-03-17 Jim Blandy <jimb@redhat.com>
1899 * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
1900 two-dimensional array, instead of faking it with explicit index
1903 * linux-thread.c (linuxthreads_attach, linuxthreads_detach,
1904 linuxthreads_create_inferior): Fix typo in variable name: it's
1905 linuxthreads_exit_status, not linux_exit_status.
1907 * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
1910 * solib.c (solib_add): Delete debugging code.
1912 2000-03-17 Mark Kettenis <kettenis@gnu.org>
1914 * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
1915 * linux-thread.c: Use WSETSTOP instead of W_STOPCODE.
1917 Fri Mar 17 11:06:59 2000 Philippe De Muyter <phdm@macqel.be>
1919 * language.c (set_lang_str): Do not call `free' for a null pointer.
1920 (set_type_str, set_range_str): Ditto.
1922 2000-03-16 Jim Blandy <jimb@redhat.com>
1924 * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
1927 * solib.c (current_sos): Be more careful about freeing the new
1928 so_list node if an error occurs.
1930 * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1931 LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1932 LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1933 LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1934 LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1935 LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1936 linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1937 i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1938 i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1939 i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1940 i386_linux_sigtramp_saved_sp): Deleted. These all implement
1941 Linux-specific signal trampoline detection, and should be moved
1943 * i386-linux-nat.c: ... here.
1944 * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
1945 this any more, since we're not enabling OS-specific code in a
1946 OS-independent file.
1948 2000-03-16 Eli Zaretskii <eliz@is.elta.co.il>
1950 * Makefile.in (go32-nat.o): Add prerequisites.
1951 (ALLDEPFILES): Add go32-nat.c.
1953 2000-03-15 Michael Snyder <msnyder@cleaver.cygnus.com>
1955 From "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
1956 * symfile.c (reread_symbols): Clear msymbol hash table.
1958 2000-03-15 Jim Blandy <jimb@redhat.com>
1960 Deal with the inferior unloading shared objects.
1961 * solib.c (current_sos): New function, replacing find_solib.
1962 (find_solib): Deleted.
1963 (free_so): New function.
1964 (clear_solib): Call free_so, instead of writing it out.
1965 (solib_add): Rewritten: compare the inferior's current list of
1966 shared objects with GDB's list, and do the required loads and
1968 (info_sharedlibrary_command, solib_address): Don't use find_solib
1969 to walk the list of shared libraries: call solib_add, and then
1970 walk the list at so_list_head normally.
1971 * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
1972 detach the core target. These tasks are taken care of elsewhere.
1973 * target.c (remove_target_sections): New function.
1974 * target.h (remove_target_sections): New declaration.
1976 * solib.c (symbol_add_stub): Check whether we've already created
1977 an objfile for this shared object first, before doing all that
1978 work to compute section addresses, etc.
1980 * objfiles.c (unlink_objfile): Report an internal error if objfile
1981 doesn't occur in the object_files list.
1983 * solib.c (special_symbol_handling): Delete argument; it's not
1986 Changes from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1988 * solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
1989 from solib structures. Use it throughout solib.c, get rid of all
1991 (struct so_list): Change type of lmaddr to CORE_ADDR.
1992 (first_link_map_member): Change return value type to CORE_ADDR,
1994 (solib_add_common_symbols): Change parameter type to CORE_ADDR,
1996 (open_symbol_file_object, find_solib): Change type of lm variable
1999 2000-03-15 Eli Zaretskii <eliz@is.elta.co.il>
2001 * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
2002 (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
2003 to ISO C. Use ATTRIBUTE_UNUSED to avoid compiler warnings.
2004 (dos_info): Avoid compiler warning when printing a ptrdiff_t.
2006 * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
2007 not opened by dos_open, but let the 3 standard handles go through
2010 2000-03-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2012 * eval.c (evaluate_subexp_with_coercion): Add call to
2013 check_typedef, to handle typedeffed vars correctly.
2015 Mon Mar 13 21:21:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
2017 * defs.h (STREQ, STRCMP, STREQN): Document that these macros are
2019 (QUIT): Note that this can probably be replaced by a function.
2021 2000-03-13 James Ingham <jingham@leda.cygnus.com>
2023 Add support for a variable object that tries to evaluate itself in
2024 the currently selected frame, rather than in a fixed frame.
2026 * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
2028 * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n
2030 * varobj.c (varobj_list): Return type indicates whether the
2031 variable's type has changed (for current frame variables).
2032 (varobj_update): Handle the case where the variable's type has
2034 (delete_variable_1): Allow for deletion of variables that have not
2036 (new_root_variable): Initialize use_selected_frame variable.
2037 (value_of_root): This is where most of the work to handle "current
2038 frame" variables was added. Most of the complexity involves
2039 handling the case where the type of the variable has changed.
2040 (varobj_create): Add a "type" argument, to tell if the
2041 variable is one of these "current frame" variables. Also protect
2042 call to parse_exp_1 from long jumping.
2044 2000-03-13 Eli Zaretskii <eliz@is.elta.co.il>
2046 * go32-nat.c (struct env387): Remove declaration.
2047 (print_387_status, i386_go32_float_info): Remove redundant
2049 (regno_mapping, sig_map, excepn_map): Add braces around inner
2051 (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
2052 fix code which mixed signed with unsigned.
2053 (go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
2054 (go32_wait): Initialize INT3_addr.
2055 (go32_fetch_registers): Extend all FP registers that are shorter
2056 than 4 bytes to 32 bits. Support 32 standard FP registers defined
2057 on config/i386/tm-i386.h.
2058 (store_register): Support 32 FP registers.
2059 (go32_create_inferior): Don't crash if handed a NULL pointer
2060 instead of exec file name.
2061 (ignore): Remove unused function.
2062 (go32_insert_hw_breakpoint): Remove unused variables.
2063 (init_go32_ops): Set value of processing_gcc_compilation to 2.
2065 Mon Mar 13 18:54:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
2067 From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
2068 overloading, add support for seeing through references:
2069 * valops.c (find_overload_match): Handle STABS overloading for
2071 (find_overload_match): Look in right place for function arguments
2073 (find_overload_match): Rather than giving up when we have >1
2074 perfect match, just choose one, especially since the
2075 recommendation GDB gives ("disambiguate it by specifying function
2076 signature"), is basically impossible.
2077 (check_field_in): STREQ->strcmp_iw
2078 (search_struct_field): STREQ->strcmp_iw
2079 (find_method_list): STREQ->strcmp_iw
2080 * gdbtypes.c (rank_one_type): Add ability to see through
2082 (rank_one_type): strcmp->strcmp_iw, because the whitespace could
2084 (rank_function): Rank function properly (was doing it wrong
2085 before, comparing the wrong parts of the arrays)
2086 (rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
2087 * gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
2088 associated with converting a non-reference to a reference.
2089 * eval.c (evaluate_subexp_standard): for OP_VAR_VALUE, always
2090 return full value object; for STRUCTOP_PTR, use pointer to
2091 rtti type to get member / method if objectprint is set and
2092 target type of pointer is class.
2094 * gdbtypes.c (rank_one_type): Add comment on how to eliminate the
2097 2000-03-11 Mark Kettenis <kettenis@gnu.org>
2099 * gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
2101 (gnu_attach): Change error message for missing
2102 argument to be identical to the corresponding message in
2103 `inftarg.c'. This makes the testsuite happy.
2105 2000-03-11 Mark Kettenis <kettenis@gnu.org>
2107 * i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
2108 %eflags isn't modified. This fixes a bug where every call to a
2109 function in the program beyond the first call would fail.
2111 Fri Mar 10 11:44:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
2113 * MAINTAINERS: Devolve responsibility for domain maintenance.
2115 2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2117 * minsyms.c (prim_record_minimal_symbol_and_info): Add comment.
2119 2000-02-25 Scott Bambrough <scottb@netwinder.org>
2121 * gdb.base/long_long.exp: Correct test suite failure when printing
2122 a long long value as a double on ARM platforms.
2124 Thu Mar 9 14:21:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
2126 * MAINTAINERS (Core): Anthony Green is the Java - including
2127 testsuite - maintainer. Reformat testsuite and language support
2130 2000-03-08 Mark Kettenis <kettenis@gnu.org>
2132 * i386-tdep.c (i386_linux_saved_pc_after_call): New function.
2133 * config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call
2134 i386_linux_saved_pc_after_call.
2136 2000-03-06 Jim Blandy <jimb@redhat.com>
2138 From Tom Tromey <tromey@cygnus.com> and Keith Seitz <?>:
2140 * minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
2141 (compact_minimal_symbols): Added `objfile' argument.
2142 Put symbols in the objfile's hash table.
2143 (install_minimal_symbols): Put symbols in the objfile's demangled
2145 (lookup_minimal_symbol): Use hash table to find symbol in
2147 (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
2149 (prim_record_minimal_symbol_and_info): Initialize the
2150 hash link fields of the new minimal symbol.
2151 * symtab.h (struct minimal_symbol): New fields `hash_next',
2152 `demangled_hash_next'.
2153 (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
2154 * objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
2155 (struct objfile): New fields `msymbol_hash',
2156 `msymbol_demangled_hash'.
2158 2000-03-06 Jim Blandy <jimb@redhat.com>
2160 * solib.c (first_link_map_member): Doc fix.
2162 2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2164 From Eli Zaretskii <eliz@is.elta.co.il>:
2166 * event-loop.c (poll_timers): Don't compare delta.tv_sec with
2167 zero, since time_t might be unsigned.
2169 2000-03-06 Mark Kettenis <kettenis@gnu.org>
2171 * i386-linux-nat.c (supply_fpregset): Mask off the reserved bits
2173 (convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP.
2175 2000-03-05 Mark Kettenis <kettenis@gnu.org>
2177 Allow GDB to run on Linux 2.0 again.
2178 * config.in: Add HAVE_PTRACE_GETREGS.
2179 * configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
2180 * configure: Regenerated.
2181 * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
2182 CANNOT_STORE_REGISTER): New defines.
2183 * i386-linux-nat.c (have_ptrace_getregs): New variable.
2184 (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
2185 old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
2186 store_register, old_store_inferior_registers): Copied over from
2187 `inptrace.c' as a temporary measure.
2188 (fetch_regs, store_regs, fetch_fpregs, store_fpregs):
2189 Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
2190 HAVE_PTRACE_GETREGS isn't defined.
2191 (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
2193 (fetch_inferior_registers, store_inferior_registers): Fall back on
2194 the method use in `infptrace.c' (by calling
2195 old_fetch_inferior_registers and old_store_inferior_registers) if
2196 `have_ptrace_getregs' isn't set.
2198 2000-03-05 Mark Kettenis <kettenis@gnu.org>
2200 * i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead
2201 of gregset_t and fpregset_t. Those are the only names that are
2202 guaranteed to specify the right types for all supported Linux
2204 Various doc fixes and gratitious local variable renames, all in an
2205 attempt to stress similarities between the code and unify the
2206 terminology used. Use ISO-C all over.
2207 (regmap): Remove trailing comma.
2208 (FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR.
2209 (convert_to_gregset): Make static. Remove GDB_REGS argument. It
2210 is unnecessary and wasn't used anyway. All callers changed.
2211 (convert_to_fpregset, convert_to_xfpregset): Likewise.
2212 (fetch_regs, store_regs): Remove unused variable `regno'.
2213 (fill_fpregs): If REGNO is not -1, only update the specified
2215 (fetch_core_registers): Renamed from
2216 i386_linux_fetch_core_registers. There is no need for a unique
2217 name since the function is static anyway.
2218 (linux_elf_core_fns): Renamed from i386_linux_nat_core_functions
2219 since it is more descriptive.
2221 Sun Mar 5 19:40:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
2223 * MAINTAINERS (readline/): Expand to include host maintainers.
2225 2000-03-04 Mark Kettenis <kettenis@gnu.org>
2227 Fix support for Linux/i386 signal trampolines. The old approach
2228 didn't work for Linux 2.2 and beyond, and didn't work with recent
2229 versions of the GNU C library.
2230 * i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
2231 LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
2232 (linux_rt_sigtramp_code): New variable.
2233 (LINUX_RT_SIGTRAMP_LEN): New define.
2234 (i386_linux_rt_sigtramp_start): New function. Detect start of
2235 signal trampolines for RT signals.
2236 (i386_linux_sigtramp): Removed.
2237 (i386_linux_in_sigtramp): New function.
2238 (i386_linux_sigcontext_addr): New function. Recognize the names
2239 of the signal tranmpolines used by recent versions of the GNU C
2240 library, and add support for RT signals.
2241 (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): New
2242 defines. Moved here from config/i386/tm-linux.h.
2243 (i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
2244 Reimplement in terms of i386_linux_sigcontext_addr.
2245 * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
2246 (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
2247 Moved to i386-tdep.c.
2248 (IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
2250 Sat Mar 4 19:38:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
2252 By: Sat Mar 4 04:08:58 2000 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
2253 * Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}.
2255 Sat Mar 4 17:23:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
2257 * MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the
2260 Sat Mar 4 16:19:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
2262 * MAINTAINERS: Add Michael Snyder and Peter Schauer to list of
2263 ``Blanket Write Privs'' maintainers.
2265 Sat Mar 4 15:58:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
2267 From Sun 20 Feb 2000 Robert Lipe <robertl@sco.com>:
2268 * language.c (longest_local_hex_string_custom): Don't compile
2269 'long long' section if host doesn't have 'long long'.
2271 Sat Mar 4 15:45:38 2000 Andrew Cagney <cagney@b1.cygnus.com>
2273 * language.c (longest_raw_hex_string): Comment out. Appears
2276 Sat Mar 4 13:02:09 2000 Andrew Cagney <cagney@b1.cygnus.com>
2278 * utils.c (mcalloc), defs.h (mcalloc): Keep consistent with
2279 "mmalloc.h" which means using PTRs.
2280 (init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C.
2282 Sat Mar 4 11:49:21 2000 Andrew Cagney <cagney@b1.cygnus.com>
2284 * defs.h (store_address, store_unsigned_integer, store_address):
2285 Replace PTR with void* in delcaration.
2286 * findvar.c (extract_signed_integer, extract_unsigned_integer,
2287 extract_long_unsigned_integer, extract_address,
2288 store_signed_integer, store_unsigned_integer, store_address):
2289 Convert definition to ISO-C. Replace PTR with void*.
2291 Sat Mar 4 10:57:25 2000 Andrew Cagney <cagney@b1.cygnus.com>
2293 * defs.h (make_cleanup_func): Document as deprecated.
2294 (make_cleanup_ftype): New typedef. Make signature consistent with
2295 other function typedefs. Document as not be used out side of
2296 make_cleanup code. Use in make_cleanup declarations.
2297 (null_cleanup): Replace PTR with void*.
2299 * utils.c (make_cleanup, make_final_cleanup, make_run_cleanup,
2300 make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup,
2301 null_cleanup): Change K&R definition to ISO-C using void* and
2303 (discard_my_cleanups): Don't cast argument to free.
2305 2000-03-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2307 * defs.h (struct continuation_arg): Change type of field 'data'
2310 * event-loop.h: Eliminate uses of PTR, use 'void *' instead.
2312 * event-top.c: Ditto.
2314 Fri Mar 3 15:39:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
2316 * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
2318 (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
2319 SUBDIR_GDBTK_ALL): Define.
2320 (all-gdbtk, clean-gdbtk): New targets.
2321 (all): Add CONFIG_ALL as dependency.
2322 (clean): Add CONFIG_CLEAN as dependency.
2324 * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
2325 (LN_S): Define. Delete GDBtk's link code.
2327 Fri Mar 3 13:12:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
2329 * configure.in (ENABLE_GDBTK): Delete variable.
2330 (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
2331 * Makefile.in: Update.
2332 * configure: Regenerate
2334 2000-03-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2336 * config/alpha/alpha-linux.mh: Remove core-regset.o fron the
2339 2000-03-02 Mark Kettenis <kettenis@gnu.org>
2341 * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
2342 Override definitions to include the normal FPU registers.
2343 (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
2344 REGISTER_CONVERT_TO_RAW): Removed. The default definitions are
2346 (i387_to_double, double_to_i387): Remove prototypes.
2348 2000-03-02 Kevin Buettner <kevinb@redhat.com>
2350 * findvar.c (extract_floating, store_floating): Use target
2351 floating point type sizes rather host sizes to determine
2352 which conversion needs to be done.
2354 2000-03-02 Nick Duffek <nsd@cygnus.com>
2356 * uw-thread.c: Apply GNU conventions to comment formatting.
2357 (deactivate_uw_thread): Call remove_thread_event_breakpoints().
2358 (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
2359 call to deactivate_uw_thread().
2361 Thu Mar 2 09:04:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
2363 * MAINTAINERS: Daniel Berlin is C++ maintainer.
2365 Thu Mar 2 08:55:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
2367 * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
2368 a joint GNU/Linux/x86 maintainer. Nick Duffeck and Robert Lipe
2369 share SCO/Unixware. Nick Duffek and Peter Schauer share
2372 Wed Mar 1 22:12:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
2374 From Wed 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
2375 * remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
2376 * remote-rdi.c (arm_rdi_close): Ditto.
2378 Wed Mar 1 19:31:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
2380 * CONTRIBUTE (configure.in): Note that patches to configure are
2383 2000-03-01 Mark Kettenis <kettenis@gnu.org>
2385 * MAINTAINERS: Correct my own mail address.
2387 Wed Mar 1 11:26:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
2389 * MAINTAINERS: Document people with paperwork pending.
2391 Wed Mar 1 00:49:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
2393 From 2000-02-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2394 Make NEW_PROC_ABI interface functional on Solaris x86.
2395 * sol-thread.c (ps_lgetLDT): Rewrite to use new
2396 procfs_find_LDT_entry function from procfs.c, mostly copied from
2398 * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
2401 Wed Mar 1 00:34:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
2403 From 2000-02-26 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2404 * config/i386/tm-i386sol2.h (MERGEPID): Define.
2406 Wed Mar 1 00:06:19 2000 Andrew Cagney <cagney@b1.cygnus.com>
2408 From 1999-08-13 J.T. Conklin <jtc@redback.com>:
2409 * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
2410 FRAME_FIND_SAVED_REGS.
2411 (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
2412 * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
2415 Tue Feb 29 23:56:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
2417 From 2000-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2418 * objfiles.c (open_mapped_file): Fix obsolete references to `mapped'
2421 Tue Feb 29 18:47:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
2423 From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
2424 * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
2425 (top level): Add prototypes for go32_* functions.
2426 * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
2427 (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
2428 Override definitions from tm-i386.h.
2429 (REGISTER_VIRTUAL_TYPE): Remove macro definition.
2430 * i386-tdep.c (i386_extract_return_value)
2431 [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
2432 to the list of targets which return FP values in FP registers.
2434 * i386-tdep.c (i386_extract_return_value): Add FIXME recommending
2435 that this function be re-implemented using multi-arch.
2437 Tue Feb 29 18:40:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
2439 From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
2440 * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
2442 * ser-go32.c: Include string.h, for prototype of strncasecmp.
2443 (dpmi_regs, dpmi_sregs): Remove unused variables.
2444 (dos_flush_input): Return a value, to prevent compiler warning.
2445 * expprint.c (dump_prefix_expression): Use %ld in format and cast
2446 sizeof(union exp_element) to long, to prevent GCC from complaining
2447 about format/argument mismatch.
2448 (dump_postfix_expression): Likewise.
2450 Tue Feb 29 18:09:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
2452 * arm-tdep.c: Include <ctype.h>.
2454 Tue Feb 29 17:33:49 2000 Andrew Cagney <cagney@b1.cygnus.com>
2456 From Wed, 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
2457 * stack.c (backtrace_command_1), infrun.c (normal_stop): Check
2458 that the target's stack was valid.
2460 Tue Feb 29 15:14:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
2462 From 2000-02-22 Stephane Carrez <stcarrez@worldnet.fr>:
2463 * dwarf2read.c (read_address): Read 16-bits addresses.
2465 2000-02-28 Scott Bambrough <scottb@netwinder.org>
2467 * arm-linux-nat.c (fetch_nw_fpe_*):
2468 Renamed to fetch_nwfpe_* to use the same naming convention
2469 as in the Linux kernel. Modified prototype to get rid of
2471 (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
2472 naming convention as in the Linux kernel. Fixed calls to
2474 (store_fpregs): Fixed calls to store_nwfpe_*. Removed
2477 Mon Feb 28 18:24:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
2479 * MAINTAINERS: Transfer d30v maintainership to David Taylor.
2481 2000-02-28 Christopher Faylor <cgf@cygnus.com>
2483 * win32-nat.c: Remove unneeded header.
2486 Mon Feb 28 13:34:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
2488 * wince.c: Include "gdb_wait.h" and not "wait.h".
2490 Mon Feb 28 10:58:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
2492 * MAINTAINERS: Mention mmalloc. Expand Host/Native and
2493 Target/Architecture maintainers descriptions.
2495 2000-02-26 Mark Kettenis <kettenis@gnu.org>
2497 * gnu-nat.c: Include "gdbthread.h". Include <hurd.h>.
2498 Reorder headers a bit. Overall cleanup and minor reformatting.
2499 (MIG_SERVER_DIED): Remove define.
2500 (proc_update_sc): Add braces to silence compiler warning.
2501 (proc_steal_exc_port): Initialize err to zero.
2502 (make_proc): Add braces to silence compiler warning.
2503 (inf_validate_task_sc): Add cast to silence compiler warning.
2504 (inf_set_traced): Reorganize a bit to silence compiler warning.
2505 (inf_validate_procs): Use mach_msg_type_number_t for all thread
2506 numbers and add braces to silence compiler warning.
2507 (gnu_wait): Add prototypes for server functions and add braces to
2508 silence compiler warnings.
2509 (S_exception_raise_request): Pass subcode to inf_debug call.
2510 (gnu_write_inferior): Remove unused variable `protection_changed'.
2511 (gnu_xfer_memory): Remove unused variable `result'.
2512 (set_sig_thread_cmd): Remove unused varible `tid'.
2513 (set_signals_cmd): Remve unused variable `trace'.
2514 (add_task_commands): Provide complete prototype. Reformat help
2515 strings a bit to make sure the first line is a full sentence.
2516 Call info_port_rights_cmd instead of info_send_rights_cmd for the
2517 "info port-rights" command.
2518 (add_thread_commands): Provide complete prototype. Make static.
2519 Reformat help strings a bit to make sure the first line is a full
2521 (_initialize_gnu_nat): Provide complete prototype.
2523 2000-02-26 Mark Kettenis <kettenis@gnu.org>
2525 Make cross-compilation for the Hurd more friendly.
2526 From Jeff Bailey <jbailey@gnu.org>:
2527 * configure.in: Use AC_CHECK_TOOL to find MiG.
2528 * Makefile.in (MIG): New variable.
2529 * config/i386/i386gnu.mh (MIG): Remove.
2530 * configure: Regenerated.
2532 2000-02-26 Kevin Buettner <kevinb@redhat.com>
2534 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
2535 comment explaining motivation behind this function and why
2536 the generic facilities won't work for this platform.
2537 * rs6000-tdep.c (skip_prologue): Always test to make sure
2538 that an instruction is read successfully from the target's
2539 memory. Introduce notion of instructions which may appear in
2540 the prologue, but may not end the prologue. Added explicit
2541 check for nop instruction. Use memset() to zero the frame
2542 data instead of assignment from a statically allocated,
2543 uninitialized structure.
2545 Sat Feb 26 17:15:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
2547 * MAINTAINERS: Chris Faylor is responsible for all MS Windows
2548 systems. Note that Jim Blandy as maintainer for ``tracing
2551 2000-02-25 Fernando Nasser <fnasser@cygnus.com>
2553 From: Thomas Zenker <thz@Lennartz-electronic.DE>
2554 * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
2555 NetBSD...) sys_errlist should not be declared in hsys.c.
2556 NEED_SYSERRLIST is set already by configure, so we can use it.
2557 * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
2558 posix compliant and we should not work with the old compatibility
2559 stuff. Because of that I undef BSD in case of FBSD etc and include
2560 sys/ioctl to get the flags.
2561 * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
2564 2000-02-24 Kevin Buettner <kevinb@redhat.com>
2566 * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
2567 of return structure in r3 if necessary.
2568 (ppc_linux_memory_remove_breakpoints): New function.
2569 * rs6000-tdep.c (skip_prologue): Make sure that the cases
2570 for storing either cr or lr to the stack only handle those
2571 cases. (I.e, don't let these cases match 0x00000000 which is
2572 found found in the shared library trampoline prior to the
2573 loading of the shared library.)
2574 * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
2576 (MEMORY_REMOVE_BREAKPOINT): Define.
2578 Wed Feb 23 23:27:48 2000 Andrew Cagney <cagney@behemoth.cygnus.com>
2580 * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
2582 Thu Feb 24 18:42:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
2584 * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
2585 $(SUBDIR_*_INSTALL) when so configured.
2586 * configure: Regenerate.
2588 * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
2590 (install-only): Add dependency on $(CONFIG_INSTALL). Delete code
2592 (uninstall): Add dependency on $(CONFIG_UNINSTALL).
2593 (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
2594 SUBDIR_GDBTK_INSTALL): Define.
2595 (install-gdbtk): New target.
2597 Thu Feb 24 18:19:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
2599 * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
2600 * configure: Regenerate.
2602 2000-02-24 Christopher Faylor <cgf@cygnus.com>
2604 * configure.tgt: Add arm, mips, sh wince targets.
2605 * config/arm/tm-wince.h: New file.
2606 * config/arm/wince.mt: New file.
2607 * config/sh/tm-wince.h: New file.
2608 * config/sh/wince.mt: New file.
2609 * config/mips/tm-wince.h: New file.
2610 * config/mips/wince.mt: New file.
2611 * wince.c: New file.
2612 * wince-stub.c: New file.
2613 * wince-stub.h: New file.
2614 * sh-tdep.c: Use correct register names for Windows CE.
2616 Wed Feb 23 19:01:45 EST 2000 Nicholas Duffek <nsd@cygnus.com>
2618 * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
2619 (error_return, quit_return): Merge into catch_return pointer.
2620 (return_to_top_level): Update comment. Longjmp to *catch_errors,
2621 and communicate reason to catch_errors via setjmp return value.
2622 (catch_errors): Always catch both quit and error, and if a catch
2623 wasn't requested by caller, throw it to the next catch_error.
2624 Replace dual longjmp buffer memcpy with single pointer change.
2625 Add FIXME for possibly adding new interface to tell caller what
2626 event was caught. Add extensive comments.
2627 * defs.h (enum return_reason): Reserve 0 for use as initial
2628 setjmp() return value.
2629 (RETURN_MASK): New public macro to generate RETURN_MASK_* from
2631 (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
2633 2000-02-23 Fernando Nasser <fnasser@cygnus.com>
2635 * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
2636 * valops.c (_initialize_valops): Add command "set unwindonsignal".
2637 (hand_function_call): Test for unwind_on_signal and act accordingly.
2639 Wed Feb 23 12:58:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
2641 * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
2642 Match ../include/dis-asm.h change.
2643 * gdbarch.h: Regenerate.
2644 * corefile.c (dis_asm_read_memory): Update.
2646 Mon Feb 21 13:57:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
2648 * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
2649 (ENABLE_CFLAGS): Move initialization to start of file.
2650 (enable-gdbmi): Add new configure option --enable-gdbmi. When
2651 selected and an ${srcdir}/mi directory is present enable MI
2654 * configure: Regenerate.
2656 * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
2657 SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
2658 (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
2659 CONFIG_LDFLAGS): New macros. Initialized by autoconf via
2661 (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
2662 INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
2664 * mi: New directory. MI interface to GDB.
2666 * defs.h (interpreter_p): Declare when UI_OUT.
2667 * top.c (gdb_init): When interpreter_p, check that the interpreter
2668 was recognized by one of the linked in interpreters.
2669 * main.c (interpreter_p): Define.
2670 (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
2671 * event-top.c (display_gdb_prompt): When interpreter_p, assume
2672 interpreter displays prompt.
2674 * breakpoint.c (print_it_typical, watchpoint_check,
2675 print_one_breakpoint, mention): When MI include additional
2676 target status information.
2677 * infrun.c (print_stop_reason, normal_stop): Ditto.
2679 2000-02-22 Jim Blandy <jimb@redhat.com>
2681 * gdbarch.sh: Make the `default' field really default to zero, as
2684 Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
2685 * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
2687 (default_coerce_float_to_double, standard_coerce_float_to_double):
2689 (value_arg_coerce): Adjust for new definition.
2690 * value.h (default_coerce_float_to_double,
2691 standard_coerce_float_to_double): New declarations for the above.
2692 * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
2693 * gdbarch.c, gdbarch.h: Regenerated.
2694 * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
2695 tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
2697 * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
2699 (mips_gdbarch_init): Install that as our coerce_float_to_double
2702 2000-02-22 Kevin Buettner <kevinb@redhat.com>
2704 * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
2706 * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
2707 forward declaration.
2709 * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
2710 where the next frame is a signal handler caller.
2712 * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
2714 (tm-linux.h): Include.
2715 (tm-sysv4.h): Don't include (directly). config/tm-linux.h will
2716 include this file for us.
2717 (REALTIME_LO, REALTIME_HI): Don't define. These are defined by
2718 config/tm-linux.h for us.
2719 (SOFUN_ADDRESS_MAYBE_MISSING): Define.
2721 2000-02-21 Kevin Buettner <kevinb@redhat.com>
2723 * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
2724 (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
2725 * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
2728 * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
2729 config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
2730 * config/powerpc/xm-linux.h: Substantially revised for native
2732 * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
2733 (NATDEPFILES): Update list to reflect the fact that we can
2736 * rs6000-tdep.c, config/rs6000/tm-rs6000.h
2737 (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
2738 Renamed; The former names were lacking the rs6000_ prefix.
2739 * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
2740 instead of rs6000_frame_chain.
2741 (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
2742 of rs6000_frameless_function_invocation.
2744 2000-02-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2746 From Philippe De Muyter <phdm@macqel.be>
2748 * event-loop.c (handle_file_event): In case of poll, enable
2749 printing of informational message if an error/exception is
2750 detected on the file descriptor.
2752 2000-02-21 Jim Kingdon <kingdon@redhat.com>
2754 * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
2756 Mon Feb 21 12:50:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
2758 * buildsym.c: Include "language.h" and "expression.h" for
2759 longest_local_hex_string_custom.
2761 Mon Feb 21 11:17:18 2000 Andrew Cagney <cagney@b1.cygnus.com>
2763 * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
2764 * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
2765 Cagney <cagney@b1.cygnus.com>.
2767 Mon Feb 21 11:03:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
2769 * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
2770 nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
2771 Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
2772 to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
2773 Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
2775 * MAINTAINERS: Add Nick Clifton to write after approval list.
2777 Mon Feb 21 10:30:39 2000 Andrew Cagney <cagney@b1.cygnus.com>
2779 * MAINTAINERS: Add note on multiple maintainers.
2781 2000-02-19 Philippe De Muyter <phdm@macqel.be>
2783 * cli-out.c (cli_table_header): Type of parameter `alignment' is
2784 `enum ui_align', not `int'.
2785 (cli_field_string, cli_field_skip): Likewise.
2787 2000-02-18 Jim Blandy <jimb@redhat.com>
2789 From Jimmy Guo <guo@cup.hp.com>:
2790 * buildsym.h (add_free_pendings): Declare.
2791 * buildsym.c (add_free_pendings): New function.
2792 (make_blockvector): 32x64 fix using longest_local_hex_string().
2793 (start_subfile): initialize variable 'subfile'.
2795 2000-02-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2797 * remote.c (remote_async_detach): Use target_mourn_inferior(), to
2798 make sure that all is cleaned up after we disconnect from the
2800 (remote_detach): Ditto.
2802 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
2804 From Rodney Brown <RodneyBrown@pmsc.com>
2805 * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
2806 potentially harming mistake.
2808 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
2810 * arm-tdep.c: Use header file instead of extern declarations for
2811 the {get,set}_arm_regname* functions.
2813 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
2815 * configure.in: Replaces obsolete gdbtk-variable.c with
2817 * configure: Regenerate.
2818 * Makefile.in: Remove obsolete/extraneous references to
2821 2000-02-16 Mark Kettenis <kettenis@gnu.org>
2823 * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
2824 the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
2825 33 by definition, whereas REALTIME_LO might be 32 on systems that
2826 have SIG32 such as Linux. Make sure that the signal number
2827 returned is within the range specified by REALTIME_LO and
2830 2000-02-16 Mark Kettenis <kettenis@gnu.org>
2832 * configure: Regenerated.
2834 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
2836 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
2837 _initialize_arm_tdep): Allows the user to choose between any of
2838 the flavors available for the disassembly to be used in the "info
2839 reg" command and elsewhere in gdb. It prevents having to maintain
2840 this information in two places by using the data kept in the
2843 2000-02-09 Mark Kettenis <kettenis@gnu.org>
2845 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
2846 prfpregset_t in <sys/procfs.h>.
2847 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
2849 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
2850 prgregset_t and prfpregset_t if they are not already present.
2852 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
2854 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
2855 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
2857 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
2859 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
2862 2000-02-15 Kevin Buettner <kevinb@redhat.com>
2864 Changes for AIX 4.3:
2865 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
2866 to correct value for generic dummy frames. When using
2867 generic dummy frames, don't attempt to write TOC value or
2868 function to call into the call dummy.
2869 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
2870 code to also handle the PowerOpen ABI.
2871 (ppc_push_return_address): Enable for all ports.
2872 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
2873 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
2874 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
2875 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
2876 provided by generic RS6000 definitions so that call dummies
2877 are implemented using generic dummy frames instead.
2879 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
2880 prior to changing the stack pointer via ptrace(). Also, ignore
2881 attempts to store to undefined registers that are less than
2884 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
2885 frame from 436 to 448 to account for alignment padding.
2886 (rs6000_push_arguments): Obtain actual register size instead
2887 of assuming the register is 4 bytes long. [There's still
2888 more work to be done to totally remove the 4 byte assumption,
2889 however.] Make sure the stack is 16 byte aligned as required
2890 by the PowerOpen ABI. Also, make sure that small structures
2891 passed in registers are properly aligned within the register.
2893 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
2895 Patch applied by Kevin Buettner <kevinb@redhat.com>
2897 * rs6000-tdep.c (skip_prologue): skip copying of argument
2898 registers to local variable registers.
2900 2000-02-14 Jim Kingdon <kingdon@redhat.com>
2902 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
2903 sym->section->index number is not a SECT_OFF_* code.
2905 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
2907 * MAINTAINERS (write after approval): Add H.J. Lu.
2909 2000-02-14 Nick Clifton <nickc@cygnus.com>
2911 * sh-tdep.c: Remove extraneous code.
2913 2000-02-14 Amit S. Kale <akale@veritas.com>
2915 * elfread.c (elf_symtab_read): Move the use of sym to after where
2917 Checked in by Jim Kingdon <kingdon@redhat.com>
2919 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
2921 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
2923 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
2925 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
2926 * dwarf2read.c: (die_is_declaration): New fn.
2927 (read_structure_scope): Use it.
2929 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
2931 2000-02-10 J.T. Conklin <jtc@redback.com>
2933 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
2934 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
2936 * gdbserver/low-nbsd.c: New file.
2938 * gdbserver/Makefile.in: convert to autoconf.
2939 * gdbserver/configure.in: likewise.
2940 * gdbserver/configure: generate.
2942 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
2944 * CONTRIBUTE: New file. How to contribute to GDB.
2946 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
2948 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
2949 Buettner to powerpc maintainers. Make Kevin Buettner the
2950 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
2951 and Jason Molenda to write after aproval list.
2953 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
2955 * MAINTAINERS: Reformat. Separate into check-in categories.
2957 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
2959 * uw-thread.c: Remove __FUNCTION__ GNUism.
2961 2000-01-17 Amit S. Kale <akale@veritas.com>
2963 * elfread.c (elf_symtab_read): Use offset for the section in which a
2964 symbol resides, instead of .text section for calculating address of a
2966 Checked in by Jim Kingdon <kingdon@redhat.com>
2968 2000-02-10 Mark Kettenis <kettenis@gnu.org>
2970 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
2971 no longer necessary now we have gdb_wait.h.
2973 2000-02-09 Mark Kettenis <kettenis@gnu.org>
2975 * gnu-nat.c (proc_string): Make global.
2976 (do_mach_notify_dead_name): Suppress dead name notifications if we
2977 know that the task is dead.
2979 1999-12-13 Mark Kettenis <kettenis@gnu.org>
2981 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
2982 instead of directly from the kernel. Add some hackery to make
2983 sure that the info isn't influenced by suspension of the task in
2984 the proc server itself.
2986 2000-02-10 Jim Kingdon <kingdon@redhat.com>
2988 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
2989 approved by Michael Snyder.
2991 2000-02-09 Mark Kettenis <kettenis@gnu.org>
2993 * linux-thread.c: Include defs.h before gdb_wait.h.
2995 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
2997 * Makefile.in (wait_h): Delete macro. Update all dependencies
2998 specifying gdb_wait.h instead.
3000 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
3001 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
3002 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
3003 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
3004 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
3005 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
3006 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
3007 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
3008 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
3009 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
3011 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
3013 * gdb_wait.h: New file. Based on ../include/wait.h. Include
3014 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
3016 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
3018 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
3019 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
3020 (d10v_stack_align): Declare.
3021 * d10v-tdep.c (d10v_stack_align): Define.
3023 1999-08-23 J.T. Conklin <jtc@redback.com>
3025 * top.c (remote_timeout): Change default to 2. Add comment
3026 explaining history of changes to the default value.
3027 * remote.c (_initialize_remote): Remove code that adds set/
3028 show remotetimeout, as that's also done in top.c
3030 1999-10-18 J.T. Conklin <jtc@redback.com>
3032 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
3033 Return E01 instead of P01 when 'P' command fails.
3035 2000-02-05 J.T. Conklin <jtc@redback.com>
3037 * remote.c (putpkt_binary): Handle NAK from target stub.
3039 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3041 * configure.in: Remove the addition of sol-thread.c to the
3042 CONFIG_INITS list. This caused problems with init.c, because
3043 sol-thread.c would be grepped twice for _initialize_* functions.
3045 * Makefile.in: Add FIXME for init.c.
3047 2000-02-07 Jim Kingdon <kingdon@redhat.com>
3049 Clean up compiler warnings:
3050 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
3051 stack.c, valprint.c: Change variables to unsigned.
3052 * bcache.c: Rearrange to avoid warnings about variables not being set.
3053 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
3054 rather than declaring print_max and repeat_count_threashold
3055 ourselves (incorrectly).
3056 * valprint.h: Do declare repeat_count_threashold.
3057 * ch-exp.c: Use default case for internal error.
3058 * findvar.c: Don't omit argument type.
3059 * symtab.c: Remove unused variable.
3061 2000-02-04 Jim Blandy <jimb@redhat.com>
3063 * c-typeprint.c (remove_qualifiers): New function.
3064 (c_type_print_base): Use it to remove qualifiers from C++
3065 qualified names, not strrchr.
3067 * c-typeprint.c (c_type_print_base): Recognize type conversion
3068 operators by calling is_type_conversion_operator.
3069 (is_type_conversion_operator): New function.
3071 2000-02-04 Nick Clifton <nickc@cygnus.com>
3073 * config/arm/tm-arm.h (LOWEST_PC): Define.
3075 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3077 * infrun.c (resume): Make just one call to target_resume(), instead
3078 of four: set up correct parameters in all the cases ahead of time,
3079 and do call at the end.
3081 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3083 * config/powerpc/tm-ppc-eabi.h: Define
3084 SOFUN_ADDRESS_MAYBE_MISSING.
3086 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3088 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
3091 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
3093 * Makefile.in (INIT_FILES): Append CONFIG_INITS
3094 * configure.in (CONFIG_INIT): Initialize.
3095 (links): Link srcdir/gdbtk/library to gdbtcl2.
3096 * gdbtcl2: Moved to gdbtk/library.
3097 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
3098 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
3099 gdbtk.h: Moved to gdbtk/generic.
3101 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3103 * printcmd.c (build_address_symbolic): New function. Returns all
3104 the parts that are necessary to print an address in a symbolic
3106 (print_address_symbolic): Split into a printing part and an
3107 information building part, build_address_symbolic().
3109 * defs.h (build_address_symbolic): Export.
3111 2000-02-03 Jim Blandy <jimb@redhat.com>
3113 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
3116 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
3118 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
3119 arguments on dummy frames.
3121 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
3123 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
3124 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
3126 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3128 * remote.c (getpkt_sane): New function. It is the old getpkt(),
3129 which now returns a timeout indication.
3130 (getpkt): New function. Wrapper for getpkt_sane(), so that return
3131 value can still be ignored.
3133 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
3135 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
3138 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
3140 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
3141 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
3144 * Makefile.in: Update.
3146 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
3147 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
3148 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
3149 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
3150 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
3151 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
3152 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
3153 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
3154 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
3155 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
3156 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
3157 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
3158 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
3159 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
3160 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
3161 config/pa/tm-hppa.h: Update.
3162 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
3164 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
3166 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
3167 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
3168 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
3169 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
3170 config/m88k/delta88v4.mh, config/mips/irix4.mh,
3171 config/mips/irix5.mh, config/mips/mipsv4.mh,
3172 config/powerpc/solaris.mh (NATDEPFILES): Change references to
3173 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
3174 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
3176 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
3178 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
3180 * main.c (captured_main): Only use the legacy tui_file code when
3181 linking in older code such as the TUI.
3183 * gdb-file.h, gdb-file.c: New files.
3184 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
3185 null_file_isatty, null_file_rewind, null_file_put,
3186 null_file_flush, null_file_write, null_file_fputs,
3187 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
3188 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
3189 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
3190 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
3191 set_gdb_file_data, struct accumulated_gdb_file,
3192 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
3193 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
3194 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
3195 stdio_file_delete, stdio_file_flush, stdio_file_write,
3196 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
3197 Moved to gdb-file.h and gdb-file.c.
3198 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
3199 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
3200 tui_file_rewind, tui_file_put, tui_file_fputs,
3201 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
3202 fputs_unfiltered_hook):
3203 Moved to tui/tui-file.c and tui/tui-file.h.
3205 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
3206 (tui-file.o, gdb-file.o): Add dependencies.
3207 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
3208 * main.c: #include tui/tui-file.h.
3210 2000-01-28 Fred Fish <fnf@cygnus.com>
3212 * findvar.c (value_from_register): Special case handling of D10V
3213 pointer values fetched from registers.
3215 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
3217 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
3218 support for new style thumb prologues.
3220 2000-01-28 Nick Clifton <nickc@redhat.com>
3222 * arm-tdep.c: Remove extraneous dash at start of strings
3223 introduced in previous delta.
3225 2000-01-27 Nick Clifton <nickc@redhat.com>
3227 * arm-tdep.c: Replace uses of arm_toggle_renames() with
3228 parse_arm_disassembler_option().
3230 2000-01-27 Jim Blandy <jimb@cygnus.com>
3232 * symtab.c (decode_line_1): Don't let commas that are within
3233 quotes or parenthesis terminate the line spec. Don't use pp when
3234 removing the final double quote of a double-quoted string. Don't
3235 forget to skip the opening double quote. I have no clue whether
3236 this change is correct; probably we've just moved this function
3237 from one buggy place to another buggy place, and never came within
3238 an outhouse whiff of correctness.
3239 (find_toplevel_char): New function.
3241 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3243 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
3244 passing the pointer to a thumb function as an argument.
3246 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3248 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
3249 are reinserted for another run.
3251 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3253 * cli-out.c (cli_filed_string): Test for NULL string.
3255 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3257 * infcmd.c (run_stack_dummy): Account for a random signal stopping
3258 the inferior as well as breakpoints being hit while performing an
3259 inferior function call.
3260 * valops.c (hand_function_call): Ditto.
3262 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3264 From Mark Kettenis <kettenis@gnu.org>
3266 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
3267 i386_REGS_SEGS_STATE.
3268 (HAVE_I387_REGS): Define.
3269 (FLOAT_INFO): Remove.
3270 * i386gnu-nat.c: Almost completely rewritten to use new i386
3271 register layout and `float info' implementation.
3272 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
3273 Move prototypes from here.
3274 * gnu-nat.h: To here.
3276 2000-01-24 Kevin Buettner <kevinb@redhat.com>
3278 * utils.c (get_field, put_field): Fix buffer underruns and
3279 overruns. Also, handle case where total_len is not evenly
3281 (getfield): Make sure zeroing of unwanted bits occurs even
3282 when bit field to extract does not straddle two or more
3285 2000-01-23 Christopher Faylor <cgf@cygnus.com>
3287 * defs.h: Add gdb_thread_select declaration.
3289 2000-01-23 Kevin Buettner <kevinb@redhat.com>
3291 * linux-thread.c (_initialize_linuxthreads): Make sure that
3292 linuxthreads_block_mask does not block SIGCHLD.
3294 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
3296 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
3297 text so that new lines work properly.
3299 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3301 * proc-utils.h: New file. Export functions from proc-*.c.
3303 * proc_api.c: Rename to:
3304 * proc-api.c: New file. Add include of proc-utils.h.
3306 * proc_events.c: Rename to:
3307 * proc-events.c: New file.
3309 * proc_flags.c: Rename to:
3310 * proc-flags.c: New file.
3312 * proc_why.c: Rename to:
3313 * proc-why.c: New file. Add include of proc-utils.h.
3315 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
3316 ctype.h, proc-utils.h.
3317 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
3318 (open_procinfo_files): Conditionalize local variable tmp, to avoid
3320 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
3322 (procfs_wait): Adjust format in some printf_filetered calls to
3323 avoid compiler warnings.
3324 (make_signal_thread_runnable): Ifdef 0. The calls to this function
3325 are also ifdef'd 0 .
3326 (procfs_resume): Add parentheses around '&&' operation.
3327 (procfs_set_exec_trap): Remove unused variable.
3328 (info_proc_cmd): Add braces to avoid ambiguous else clause.
3330 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
3331 proc-why.o): Update dependencies.
3333 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
3336 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
3338 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
3339 Fix from Robert Lipe <robertl@sco.com>.
3340 * configure: Regenerated.
3342 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3344 * stack.c (print_frame_info_base): Break up into the frame info
3345 (location) printing part and the rest (source line printing).
3346 (print_frame): New function. Take care of printing the location
3350 * infrun.c (normal_stop): Use enum values rather than integers for the
3351 source_flag to be passed to show_and_print_stack_frame().
3354 * frame.h (print_what): New enum for 'source' argument to
3355 print_frame_info_base(). Use this instead of obscure numbers.
3358 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
3360 * event-top.c (stdin_event_handler): call quit_command rather than
3361 exit -- run cleanups, give target code a chance to say goodbye to
3362 the target. Fixes bug where the inferior processes were left
3363 around on Solaris (and probably elsewhere) by the testsuite.
3365 2000-01-14 Mark Salter <msalter@cygnus.com>
3367 * v850-tdep.c (v850_target_architecture_hook): Setup correct
3368 machine id for disassembly.
3370 2000-01-13 Jim Blandy <jimb@cygnus.com>
3372 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
3373 convert_to_regset, when regno indicates a specific register.
3375 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
3377 * uw-thread.c: Document libthread.so debugging interface. Minor
3378 comment and formatting tweaks.
3379 (DEBUG): #define as 0 instead of 1.
3380 (CALL_BASE): Include function name in error msg.
3381 (libthread_stub): Adjust inferior_pid after thread exit.
3382 (uw_thread_create_inferior): Deactivate uw_thread_ops before
3383 asking procfs_ops to create inferior.
3384 (libthread_init): Don't return nonlocally on error.
3386 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
3388 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
3391 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
3393 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
3394 both sides are on the same state.
3396 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
3398 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
3399 115200 (minor syntax mistake).
3401 2000-01-12 Jim Blandy <jimb@cygnus.com>
3403 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
3404 this here, to go along with the definitions of PIDGET and TIDGET.
3406 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3408 * thread.c (do_captured_thread_select): New function. Switch
3409 current thread, safely from within catch_errors().
3410 (gdb_thread_select): New function. Switch threads safely.
3411 (thread_command): Use gdb_thread_select().
3413 (do_captured_list_thread_ids): New function.
3414 (gdb_list_thread_ids): New function.
3416 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
3418 2000-01-11 Christopher Faylor <cgf@cygnus.com>
3420 * configure.in: Avoid linking -limagehlp unless it's a native build.
3421 * configure: Regenerate.
3422 * thread.cc (add_thread): Clear private data pointer here or suffer
3423 strange behavior when it is checked for NULL later.
3425 2000-01-09 Christopher Faylor <cgf@cygnus.com>
3427 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
3428 * configure.in: Add an additional library to cygwin link.
3429 * configure: Regenerate.
3431 Patch from Egor Duda <deo@logos-m.ru>:
3432 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
3435 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
3437 * uw-thread.c: New file to support UnixWare user-mode threads:
3438 contributed by Nickolas Duffek <nsd@cygnus.com>.
3439 * target.h (struct target_ops): New vector, to_extra_thread_info,
3440 allows back-ends to give extra details in info thread display.
3441 (target_extra_thread_info): define new macro.
3442 (target_find_new_threads): simplify macro. Cleanup comments.
3443 * target.c (to_extra_thread_info): default and inherit new vector.
3444 (cleanup_target): eliminate PARAMS, break up long lines,
3445 provide default definition for to_extra_thread_info, and
3446 to_find_new_threads. Default to_thread_alive and to_query
3447 to return_zero, not target_ignore (they each return int not void).
3448 (debug_to_find_new_threads): new debug entry.
3449 (setup_target_debug): add debug_to_find_new_threads.
3450 * gdbthread.h: export struct thread_info, find_thread_pid, and
3451 iterate_over_threads. Add comments. Eliminate PARAMS. Update
3452 copyright. Add new private data pointer for use by target back-ends.
3453 * thread.c (struct thread_info): move definition to gdbthread.h.
3454 (find_thread_pid): new exported function for thread lookup.
3455 (iterate_over_threads): new exported function for applying
3456 arbitrary operations to threads. Update copyright to 2000.
3457 (info_threads_command): use new target_extra_thread_info vector
3458 to display extra information about each thread (if implemented).
3459 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
3460 Add defines for PIDGET, etc.
3461 * config/i386/tm-i386sol2.h: ditto.
3462 * config/sparc/tm-sun4sol2.h: ditto.
3463 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
3464 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
3465 if -lpthread and -lpthreads fail.
3467 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
3468 (proc_flags): combine flags that UnixWare splits into two locations.
3469 (proc_modify_flag): add support for PR_KLC (kill on last close).
3470 (proc_[un]set_kill_on_last_close): new functions.
3472 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3474 * infrun.c (normal_stop): Print out thread id when we stop.
3476 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3478 * remote.c (remote_open_1): Fix message so it does not imply a
3479 specific syntax for serial ports, as it is OS dependent.
3480 (remote_async_open_1): Ibid.
3481 (init_remote_ops): Ibid.
3483 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3485 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
3486 "set remotebaud" command (if set) when no speed is specified on
3487 the "target rdi" command.
3489 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3491 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
3493 (baud_options[]): Ibid.
3495 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3497 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
3498 used by each operating system.
3500 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3502 * breakpoint.c (until_break_command): Add an argument for the
3503 continuation, the beginning of the cleanups set up by this
3505 (until_break_command_continuation): Do cleanups until the one
3506 passed in as argument instead of doing all of them.
3508 * infcmd.c (finish_command_continuation): Expect a new argument,
3509 which indicates up to where to do cleanups. Update calls to
3510 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
3511 (finish_command): Add another argument for the continuation: the
3512 starting cleanup for this command.
3514 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
3516 From Grant Edwards <grante@visi.com> (original patch from Thomas
3518 * rdi-share/ardi.c: Allow interruption of interruptible
3519 targets with a <CNTL-C>.
3521 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3523 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
3524 to control port to accommodate some versions of Angel.
3526 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3528 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
3529 Add interpretation for C Support Library packets.
3531 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3533 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
3534 is now being modified.
3535 * rdi-share/devsw.h: Adjust declaration of the above funtion.
3537 For older changes see ChangeLog-99
3543 version-control: never