2 Wed May 14 12:04:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
4 * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.
8 Mon May 12 11:35:04 1997 Mark Alexander <marka@cygnus.com>
10 * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
11 basic C80 features working.
14 Thu May 8 08:42:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
16 * configure.in (AC_TYPE_SIGNAL): Add
17 * configure: Re-generate.
18 * remote-sim.c: Signal returns RETSIGTYPE.
21 Wed May 7 19:10:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
23 * gdbtk.c (wrapped_call): New function - make actual call to tk
25 (call_wrapper): Rewrite to use top.c:catch_errors.
27 * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
31 Wed May 7 20:05:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
33 * target.h (target_stop): Drop argument so it can be tested for
36 Sat May 3 20:51:48 1997 Mark Alexander <marka@cygnus.com>
38 * utils.c (floatformat_from_doublest): Handle infinity properly.
40 Thu May 1 11:44:46 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
42 * Finalize merge from Hurd folk.
43 Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
44 * thread.c (thread_apply_command, thread_apply_all_command,
45 thread_command): Make sure TP is alive.
46 (thread_alive): New function.
47 Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
48 * infrun.c (sig_print_info): Deal better with long signal names.
49 Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
50 * thread.c (thread_id_to_pid): New function.
51 Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
52 * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
53 set_thread_default_cmd_list, show_thread_default_cmd_list):
54 New variables. (set_thread_cmd, show_thread_cmd,
55 set_thread_default_cmd, show_thread_default_cmd): New functions.
56 Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
57 * gnu-nat.c (inf_startup): remove TASK parameter.
58 (inf_set_task): replace with new function (inf_set_pid).
59 * gdbthread.h: Add extern decl for thread_cmd_list.
61 Thu May 1 02:28:21 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
63 * printcmd.c (disassemble_command): Adjust low function bound
64 by FUNCTION_START_OFFSET.
67 Wed Apr 30 15:23:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
69 * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
72 Mon Apr 28 21:25:32 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
74 * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
75 * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
76 in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
77 satisfy symbol dependancy in solib.c (core_ops).
78 * target.[ch] conditionalize Mach-specific signals so that they
79 won't show up in non-Mach gdb's!
80 * thread.c: change name of static function "thread_switch" to
81 "switch_to_thread", to avoid conflict with Mach global symbol;
82 move thread_cmd_list to global scope so targets can add their
84 * infrun.c: sig_print_info: allow for long signal names.
85 * gnu-nat.[ch]: tidying up comments.
86 * gnu-nat.c: remove calls to prune_threads and renumber_threads;
87 gnu_wait must not return -1 when inferior exits;
88 attach_to_child will modify inferior_pid in a way that allows
89 fork_inferior to remain unchanged; remove extra arg from
90 startup_inferior; move Mach thread commands here from thread.c.
92 Mon Apr 28 18:21:20 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
94 * symtab.c: decode_line_1, replace the assignment to
95 values.sals[0].pc which I accidentally left out on 4/3/97.
97 Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
99 * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
101 * top.c: change "to enable to enable" to "to enable" in a couple
104 Mon Apr 28 09:01:59 1997 Mark Alexander <marka@cygnus.com>
106 * breakpoint.c (remove_breakpoint): Pass correct type to
107 target_remove_watchpoint.
108 * target.h: Improve comment for target_{remove,insert}_breakpoint.
110 Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
112 * alpha-tdep.c (heuristic_proc_desc): Increase search limit
113 for return address register, handle `ret' instruction.
115 * corelow.c (get_core_registers): Initialize cf.
117 * procfs.c: Minor changes to make pre-ANSI compilers happy.
118 (procfs_notice_signals): Copy traced signal set back to
120 (unconditionally_kill_inferior): If PR_DEAD is defined,
121 rerun inferior after killing it.
123 Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com)
125 * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
126 structure value address is found in $a0 now.
127 * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
129 Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com)
131 * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
133 (EXTRACT_RETURN_VALUE): Likewise.
135 * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
136 insn at "pc", not "fi->pc".
139 Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
141 * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
142 (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
143 MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
144 (NPC_REGNUM): Tic80 has a delay slot.
145 (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
149 Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
151 * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
153 (EXTRACT_RETURN_VALUE): Likewise.
155 Tue Apr 22 11:58:15 1997 Fred Fish <fnf@cygnus.com>
157 * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
158 floatformat_ieee_double_littlebyte_bigword for little endian
160 * utils.c (floatformat_to_doublest): Create local preswapped
161 copy of input for floatformat_littlebyte_bigword formats.
162 (get_field, put_field): Treat floatformat_littlebyte_bigword
163 the same as floatformat_little.
164 (floatformat_from_doublest): Postswap output words for
165 the floatformat_littlebyte_bigwords format.
168 Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
170 * config/tic80/tic80.mt (SIM): Link in simulator.
173 Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
175 * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
176 config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
177 vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
178 aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
182 Remove -lm. That's now handled by configure.
184 * Makefile.in (maintainer-clean): Add distclean to dependencies.
185 Remove duplicate rm's of files.
188 Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
190 * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
193 Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
195 * remote-pa.c: Remove. It's broken and no longer necessary.
197 Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
199 * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
200 (Avoids name clash with broken AIX header files.)
202 Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
204 * serial.c (serial_log_command): Fix fputs_unfiltered calls.
206 * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
207 (DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
208 * xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
210 * exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
211 tstart and dstart with section VMA.
212 * rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
214 (vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
215 of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
216 (vmap_exec): Relocate relative to the VMA in the object file,
217 relocate .bss section as well.
218 (xcoff_relocate_core): No longer adjust section addresses by VMA.
219 * rs6000-tdep.c (find_toc_address): Change type of tocbase
221 * xcoffread.c (secnum_to_bfd_section): New routine to get
222 BFD section from CS section number.
223 (scan_xcoff_symtab): Make toc_offset section relative.
225 * symtab.c (total_number_of_methods): Avoid core dump if
226 baseclass type is still undefined.
228 Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com)
230 * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
232 * defs.h utils.c (error warning): Make message be const.
233 * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
234 to hook. Otherwise send it to fputs.
235 * monitor.c monitor.h (monitor_get_dev_name): New function. Does
237 * remote-e7000.c: Remove debugify stuff. Change printf, fprintf
238 to _filtered forms to make output appear in GUIs. Replace all
239 uses of SERIAL_READCHAR with readchar, which has better error
241 * (e7000_parse_device): Add prototype.
242 (readchar): Improve doc. Handle random serial errors.
243 (expect): Disable notice_quit code. It's busted. Remove
244 serial error handling (it's now handled in readchar). Remove
245 remote_debug echoing. That's handled in readchar as well.
246 (e7000_parse_device): Remove serial_flag arg. It's not
248 (e7000_open): Split into two pieces. Second part is
249 e7000_start_remote, and is error protected. Now, when we connect
250 to the target, we setup the initial frame and registers so that
251 the user gets an immediate indication of where the target is.
252 (gch): Remove debug output. That's handled by readchar.
253 (e7000_read_inferior_memory): Handle errors better.
254 (_initialize_remote_e7000): Get rid of `<xxx>' things from
255 command names. They show up when doing completion and confuse
257 * ser-e7kpc.c: Get rid of the DLL's since we can access the device
258 directly from Win32s and Win95. Get rid of debugify crud.
259 * serial.c: Remove debugify cruft.
260 * (serial_logchar serial_log_command serial_write serial_readchar
261 serial_send_break serial_close): Merge common functionality into
262 serial_logchar. Clean up rest of routines.
263 * sparclet-rom.c: Disembowel. Leave only download routine.
264 Download routine now switches to remote target automatically.
265 * top.c (disconnect): Only define if SIGHUP is defined. Cleans
266 up MSVC/Win32 problem.
267 * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
269 * config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
270 * config/sparc/tm-sparclet.h: Remove override for prompt.
272 Fri Apr 18 13:38:19 1997 Doug Evans <dje@canuck.cygnus.com>
274 * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
275 TARGET_BYTE ORDER_SELECTABLE.
277 Fri Apr 18 16:52:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
279 * remote-sim.c (init_callbacks): Initialize poll_quit and magic
280 fields of gdb_callback.
281 (gdbsim_stop): Add gdbsim_stop to list of supported client
283 (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
284 sim_wait where gdb is in a position to handle a long running
286 (gdbsim_cntrl_c): New function. Wrap the sim_resume call in a
288 (gdb_os_poll_quit): New function. Check for a quit pending on the
292 Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
294 * Makefile.in (install-only): Make list of gdbtcl files to install
295 explicit - was picking up files such as ChangeLog etc.
296 (install-only): Don't blindly create the directory.
299 Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
301 * defs.h (enum language): Add language_java.
302 * java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
303 * Makefile.in: Update for new files.
304 * objfiles.c (allocate_objfile): Allow NULL bfd argument.
305 * symfile.c (deduce_language_from_filename): Recognize .java.
307 Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
309 * m32r-stub.c (stash_registers): Rewrite.
310 (restore_registers): Renamed to restore_and_return.
311 (cleanup_stash): New function.
312 (process_exception): New function.
313 (_catchException*): Rewrite.
315 * remote-sim.c (gdbsim_load): Update call to sim_load.
316 (gdbsim_create_inferior): No longer pass start_address to
318 (gdbsim_open): Pass endian indicator as arg.
320 Tue Apr 15 15:31:09 1997 Stan Shebs <shebs@andros.cygnus.com>
322 * remote.c (get_offsets): Don't use scanf for interpreting
323 response to qOffsets.
325 Tue Apr 15 14:51:04 1997 Ian Lance Taylor <ian@cygnus.com>
327 * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
328 (INSTALL_XFORM1): Remove.
329 (install-only): Use $(program_transform_name) directly, rather
330 than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
331 (uninstall): Transform name.
333 Mon Apr 14 17:06:27 1997 Mark Alexander <marka@cygnus.com>
335 * remote-mips.c (mips_load): Ensure that PC gets updated
336 after a load on LSI target.
338 Mon Apr 14 15:54:51 1997 Geoffrey Noer <noer@pizza.cygnus.com>
340 * procfs.c (notice_signals): fix typo
342 Mon Apr 14 16:25:10 1997 Ian Lance Taylor <ian@cygnus.com>
344 * gdbserver/Makefile.in (INSTALL): Change install.sh to
347 Mon Apr 14 11:55:27 1997 Geoffrey Noer <noer@pizza.cygnus.com>
349 * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
350 since gcc automatically includes it
352 Thu Apr 10 13:20:53 1997 Geoffrey Noer <noer@cygnus.com>
354 * procfs.c: Substantial (but incomplete) changes to support
355 sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
356 struct now has substructs like struct flt_ctl instead of
357 just a fltset_t and has a ctl_fd, status_fd, as_fd, and
358 map_fd instead of a single fd. Non-sysv4.2mp procfs models
359 still have the structs and multiple fds, but don't use the
360 entire struct and the four fds all point to the same thing.
361 We use PROCFS_USE_READ_WRITE to decide whether to talk to
362 procfs with reads/writes or use ioctl instead. We use
363 HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
364 multiple fds or not. PROC_NAME_FMT is split out into
365 CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
366 STATUS_PROC_NAME_FMT.
368 (procfs_notice_signals): now a necessary wrapper around
369 (notice_signals): which are the new guts for noticing signals
370 (open_proc_file): gets a new flag arg used in sysv4.2mp to
371 determine whether or not to attempt to open the ctl_fd.
372 (procfs_read_status): new local function, reads procfs status
373 (procfs_write_pcwstop): new local function, writes a PCWSTOP
374 (procfs_write_pckill): new local function, writes a PCKILL
375 (unconditionally_kill_inferior): remove signo since we now
376 just call procfs_write_pckill().
377 (procfs_xfer_memory): call lseek with SEEK_SET rather than 0
378 (proc_iterate_over_mappings): the whole function is ifdefed
379 on UNIXWARE to keep things readable.
381 Expanded the syscall_table to include new potential sysv4.2mp
382 members. Note that all ifdefs of UNIXWARE should be eliminated
383 if possible or renamed to describe what's being selected for a
384 bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
385 IRIX specific code now also checks it's not UNIXWARE.
387 * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
388 HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
389 * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
390 "/debug/%d" as PROC_NAME_FMT used to be
392 Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com)
394 * mn10300-tdep.c: Almost completely rewritten based on mn10200
396 * config/mn10300/tm-mn10300.h: Likewise.
398 Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com)
400 * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove
401 remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a
402 lousy out-of-date clone of remote.c.
404 Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com)
406 * remote.c: Fix problems realized while showering.
407 * (hexnumlen): Add prototype. Use max, not min.
408 * (remote_write_bytes remote_read_bytes): Fix max packet size
409 calculations to properly account for packet overhead. Also handle
410 (probably rare) case where remote_register_buf_size isn't set.
412 * remote.c: Fix doc for `C' and `S' commands to indicate full
414 * (remote_ops extended_remote_ops remote_desc remote_write_size):
416 * (remote_fetch_registers remote_write_bytes remote_read_bytes):
417 Record size of response to fetch registers command, use this to
418 limit size of memory read and write commands.
419 * (push_remote_target): New function to make it possible to have
420 another target switch to the remote target.
421 * target.h: Add prototype for push_remote_target.
422 * sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
423 for hosts which default to unsigned chars (such as SGI's).
424 * (_initialize_sh_tdep): Don't set remote_write_size. It's now
425 handled automatically in remote.c.
427 Thu Apr 3 15:10:30 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
429 * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
430 find_pc_sect_function(), find_pc_sect_partial_function(): new
431 functions for debugging overlays; pc without section is ambiguous.
432 * breakpoint.[ch]: add section pointer to breakpoint struct;
433 add section argument to check_duplicates(); check section as well
434 as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
435 breakpoint_thread_match(), bpstat_stop_status()];
436 add section argument to describe_other_breakpoints();
437 use INIT_SAL() macro to zero-out new sal structures;
438 make resolve_sal_pc() fix up the sal's section as well as its pc;
439 match on section + pc in clear_command() and delete_breakpoint();
440 account for overlay sections in insert_breakpoints(),
441 remove_breakpoint() and breakpoint_re_set_one();
442 all this to support overlays where a PC is not unique.
443 * exec.c: change xfer_memory() to handle overlay sections.
444 * findvar.c: change read_var_value() to handle overlay sections.
445 * frame.h: declaration for block_for_pc_sect() [blockframe.c].
446 * infcmd.c: jump_command() warns against jumping into an overlay
447 that's not in memory. Also use INIT_SAL() to initialize sals.
448 * infrun.c: wait_for_inferior() sets a flag to invalidate cached
449 overlay state information; Also use INIT_SAL() to init sals.
450 * m32r-rom.c: modify load routines to use LMA instead of VMA.
451 * m32r-stub.c: mask exit value down to 8 bits; screen out any
452 memory read/writes in the range 600000 to a00000, and ff680000
453 to ff800000 (hangs because nothing is mapped there); fix strcpy().
454 * maint.c: maintenance command "translate-address" supports overlays.
455 * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
456 * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
457 this constitutes gdb's internal overlay mapping table. Add macro
458 ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
459 Add function find_pc_sect_section().
460 * printcmd.c: modify print_address_symbolic() with overlay smarts;
461 modify address_info() with overlay smarts; add function sym_info()
462 to support the INFO SYMBOL command (translate address to symbol(s));
463 modify disassemble_command() to work on unmapped overlays.
464 * source.c: use INIT_SAL() to initialize sals.
465 * symfile.[ch]: change generic_load() to use section's LMA address
466 instead of VMA address, for overlay sections.
467 Add numerous functions for finding a PC's section / overlay,
468 translating between VMA and LMA address ranges, determining if an
469 overlay section is mapped, etc. Add several user commands for
470 overlay debugging. Add support for a "generic" form of automatically
471 reading overlay mapping info from the inferior (based on the default
472 (simple) overlay manager which Cygnus provides as an example).
473 * symtab.[ch]: add functions find_pc_sect_symtab(),
474 find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
475 for lookup; modify lookup_symbol and decode_line_1() to use them;
476 modify find_function_start_sal() to account for overlay sections;
477 add macro INIT_SAL() for initializing struct symtab_and_line.
478 * target.c: fix a comment in the declaration of target_ops.
480 Thu Apr 3 10:31:12 1997 Mark Alexander <marka@cygnus.com>
482 * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
483 mips_skip_stub, mips_ignore_helper): New functions for dealing
484 with MIPS16 call/return thunks.
485 (mips_init_frame_pc_first): New function to implement
486 INIT_FRAME_PC_FIRST macro; includes code from old macro plus
487 new code to skip over MIPS16 thunks.
488 (mips_frame_chain): Skip over MIPS16 thunks.
489 * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
490 mips_skip_stub, mips_ignore_helper): Declare.
491 (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
492 SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
494 (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
495 (mips_init_frame_pc): Declare.
496 * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
497 to decide if certain library function calls should be ignored.
499 Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
501 * remote-sim.c (gdbsim_open): Check return code from sim_open.
502 Update call to sim_open (new arg SIM_OPEN_DEBUG).
505 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
507 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
511 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
513 * gdbinit.in: New file.
515 * configure.in: Generate .gdbinit from gdbinit.in.
516 * configure: Rebuild.
519 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
521 * config/tic80/tic80.mt: Disable using the simulator
525 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
527 * COPYING: Install new version of file from FSF.
528 * copying.c (show_copying_command): Update FSF address.
530 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
532 * Makefile.in (distclean): Remove .gdbinit.
535 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
537 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
540 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
542 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
543 to va_list from void *, since va_list might not be a pointer
547 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
549 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
550 default, not $(srcdir).
553 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
555 * remote-mips.c: Clean up comment and extraneous semicolon
556 for mips_monitor_prompt variable.
558 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
560 * remote-mips.c: Add `set monitor-prompt' command.
562 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
564 Fix from Peter Schauer:
565 * mdebugread.c (parse_procedure): Set address of procedure to
566 block start; this fixes problems with shared libraries introduced
569 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
571 * symtab.c (find_pc_symtab): change to support the case
572 where the objfile is reordered and contains both coff and
573 stabs debugging info (continue on if a psymtab isn't found).
575 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
577 Fixes from Peter Schauer:
578 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
579 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
580 is big-endian and if registers are 32 bits.
581 * mips-tdep.c (mips_print_register, mips_extract_return_value,
582 mips_store_return_value): Fix floating-point word-order problems on
583 little-endian targets introduced by changes of Mar 21.
585 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
587 * remote.c (target_resume_hook, target_wait_loop_hook): New
589 (remote_resume, remote_wait): Use them.
590 * d10v-tdep.c: Set the above hooks.
591 (tracesource): New GDB variable, controls source display in
593 (display_trace): Find and display source line if requested.
594 (trace_info): Mention empty trace buffer if appropriate.
595 (tdisassemble_command): Robustify argument handling.
597 * configure.host: Remove extra bogus Linux case.
599 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
601 * remote-sim.c (simulator_command): Add comment about dealing with
604 * Makefile.in (tic80-tdep.o): Add target.
605 * configure.tgt: Add tic80 case.
606 * tic80-tdep.c: New file.
607 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
610 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
612 * c-exp.y (yylex): Handle nested template parameter lists.
613 * symtab.c (decode_line_2): Fix test for valid choice number.
615 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
617 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
618 copy first two floating point arguments to general registers, so that
619 MIPS16 functions will receive the arguments correctly.
620 (mips_print_register): Print double registers correctly on
622 (mips_extract_return_value): Return double values correctly
623 on little-endian hosts.
625 * mdebugread.c (parse_procedure): Adjust address of procedure relative
626 to address in file descriptor record; this accounts for constant
627 strings that may precede functions in the text section. Remove
628 now-useless lowest_pdr_addr from argument list and all calls.
630 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
632 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
633 whether the simulator will be built by whether the Makefile in the
634 simulator directory was built.
636 * configure.in (--enable-sim-powerpc): Delete switch.
637 * configure: Regenerate.
639 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
641 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
644 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
646 (gdb_os_evprintf_filtered): Similarly.
648 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
650 New UnixWare 2.1 configuration
651 * config/i386/i386v42mp.mt: new
652 * config/i386/i386v42mp.mh: new
653 * config/i386/tm-i386v42mp.h: new
654 * config/i386/nm-i386v42mp.h: new
655 * configure.tgt: added new entries
656 * configure.host: added new entries
659 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
661 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
663 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
664 to GDBTK_LIBRARY, which is now a path to search.
665 (gdb_path_conv): New function. Convert Cygwin32 pathname to
668 * {aclocal.m4,configure.in}: Changes for Windows builds.
670 * configure: Rebuilt.
673 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
675 * dsrec.c (load_srec): Print leading zeroes when printing section
678 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
680 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
682 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
684 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
686 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
687 vprintf_filtered, evprintf_filtered): Callbacks that accept
690 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
692 * breakpoint.c (insert_breakpoints, watchpoint_check,
693 bpstat_stop_status): Do not disable watchpoints going out of scope.
694 (insert_breakpoints): Make sure that the current frame is valid
695 before calling find_frame_addr_in_frame_chain.
697 * top.c (setup_user_args): Handle quotes and backslashes.
698 (print_gdb_version): Update copyright year.
700 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
702 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
705 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
707 * configure: Regenerated.
708 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
711 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
713 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
715 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
716 except under wingdb. (Contributed by Martin Hunt).
718 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
720 * configure: Regenerated.
721 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
723 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
725 * remote-sim.h (sim_state, SIM_DESC): New types.
726 (sim_open): Return a `descriptor' as result.
727 (*): New argument of descriptor result from sim_open.
728 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
729 (gdbsim_open): Record result of sim_open in gdbsim_desc.
730 Pass argv list to sim_open, argv[0] = pseudo program name.
731 (*): Pass gdbsim_desc to sim_foo fns.
733 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
735 * config.in: Regenerated.
737 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
738 HAVE_HPUX_THREAD_SUPPORT): Define.
741 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
743 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
746 * configure: Regenerated.
747 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
751 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
753 First cut at supporting simulators in gdbserver:
755 * configure, configure.in: Allow gdbserver to be configured
756 for cross-target environments.
757 * gdbserver/Makefile.in: Add simulator support.
758 * gdbserver/configure.in: Eliminate assumption that host == target.
759 Simplify using gdb/configure.tgt and gdb/configure.host.
760 Fix other minor configuration errors.
761 * gdbserver/low-sparc.c: Fix compile error.
762 * gdbserver/remote-utils.c: Eliminate assumption that registers
763 and addresses are four bytes. Fix minor compile errors and warnings.
764 * gdbserver/server.c: Rewrite numerous instances of identical code
765 for starting inferior processes to call new function start_inferior.
766 Eliminate assumption that registers and addresses are four bytes.
767 * gdbserver/server.h: Add missing prototypes to eliminate compiler
769 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
770 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
771 * config/i386/linux.mh: Eliminate gdbserver support as a first step
772 in moving such support from host to target makefile fragments.
773 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
775 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
777 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
778 to insure consistant initialization of unused fields to zero.
779 * symtab.c: replace initializations of sals with new macro INIT_SAL.
780 * breakpoint.c: ditto.
783 * source.c: add call to INIT_SAL macro.
785 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
787 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
788 they might get used on 32 bit targets as well.
790 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
792 * remote-mips.c (mips_exit_debug): Some IDT boards don't
793 send the full exit string.
795 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
797 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
799 (mn10200_store_struct_return): Likewise.
801 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
803 * mips-tdep.c (mips_fetch_instruction): New function; replace
804 common code throughout with calls to it.
805 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
806 correct saved addresses of $s0 and $s1.
807 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
808 instead of hardcoded 4.
809 (mips16_skip_prologue): Handle extended instructions correctly.
811 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
813 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
814 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
816 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
818 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
819 New macros for testing, setting, and clearing bit 0 of addresses.
820 Change numerous bits of code where bit 0 was being manipulated
823 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
825 * remote-mips.c: Put back the form feeds.
827 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
829 * remote-mips.c: Remove form feeds (^L) from source.
830 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
831 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
832 PMON after a continue; it causes target program misbehavior.
833 (mips_fetch_register): Don't fetch unsupported registers; this
834 cuts down on wasted serial traffic.
836 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
838 * configure.in configure (HPUX/OSF thread support): Enable this
839 only when running GCC, since HP's thread header files use ANSI C
840 which is not supported by their default compiler.
842 * configure.host (i[3456]86-*-windows): Disable long long
843 support for WinGDB. Add mswin to configdirs.
844 * configure.in configure: Move calls to configure.host and
845 configure.tgt to the top of configure.in to allow them to set
846 config variables before they are referenced.
848 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
850 * configure.tgt (mips*-*-lnews*): New target.
852 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
854 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
855 if we're not the innermost frame. Fix minor typos.
857 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
859 * stabsread.c (read_type): Fix handling of template names
860 with template parameters containing `::'.
862 * valops.c (search_struct_field, search_struct_method):
863 Pass correct valaddr parameter to baseclass_offset.
864 Prevent gdb crashes by making sure that the virtual base pointer
865 from an user object still points to accessible memory.
867 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
869 * maint.c: Eliminate -Wall warnings by including some header files.
871 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
873 * remote-sim.c (init_callbacks): Undo previous change.
875 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
877 * maint.c: Fix dereference of pointer.
878 * remote-sim.c: Fix reference of structure member "last_error".
879 * debugify.c: Include config.h to get ANSI definitions.
881 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
883 * remote-vx.c (vx_attach): Remove code added by kung. It made no
886 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
888 * main.c (print_gdb_help): Make static to match declaration.
890 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
892 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
894 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
896 * debugify.c, debugify.h: Make safe for non-ansi compilers.
898 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
900 * defs.h: Fix prototypes for new cleanup functions.
902 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
904 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
905 comment, add PARAMS, add license info and fix indentation.
907 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
909 * debugify.c, debugify.h: New files. Provide common macros
910 for writing debug info to a log file or stdio.
912 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
914 * c-valprint.c (c_val_print): Fix printing for arrays defined
917 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
919 * defs.h: Fix cntl-C to read from the Windows message queue.
920 Add prototypes for make_final_cleanup (and the other cleanup
922 * remote-e7000.c: Fix sync code to timeout if unable to sync.
923 Change sync code to report status while trying to sync-up
924 with hardware. Add debugging output and document.
925 * ser-e7kpc.c: Swap order of len & offset to match implementation.
926 Add debugging output and document.
927 * serial.c: Add debugging output.
928 * top.c: Add call to do_final_cleanups.
929 Remove conditionals preventing Win32 from getting SIGQUIT.
930 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
931 chain as a parameter. Extract this generic code from the cleanup
932 routines into separate funtions (*_my_cleanup). Keep old
933 functionality by passing "cleanup_chain" to the new funtions.
934 Define the cleanup chain "final_cleanup_chain" to be a cleanup
935 chain which will be executed only when gdb exits. Add functions
936 (*_final_cleanup) to match the original (*_cleanup) functions.
937 (pollquit, quit, notice_quit): Fix to read cntl-C from the
938 Windows message queue.
940 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
942 * m32r-rom.c: #include <sys/types.h>.
943 #ifdef out new load support if wingdb.
944 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
946 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
949 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
950 * mn10200-tdep.c (mn10200_store_struct_return): New function.
952 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
953 extracting a return value from a register pair.
955 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
956 be two byte aligned. Round argument sizes up to two byte boundary.
957 Write out args in two byte hunks.
958 (mn10200_push_return_address): Implement.
959 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
960 structures > 8 bytes (temporary).
961 (STORE_RETURN_VALUE): Likewise.
962 (CALL_DUMMY): No longer undefine.
963 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
964 (REG_STRUCT_HAS_ADDR): Define.
967 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
969 * configure.tgt: added r5900.
972 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
974 * mips-tdep.c (non_heuristic_proc_desc): New function.
975 (find_proc_desc): Move non-heuristic proc search code into separate
977 (gdb_print_insn_mips): Use non-heuristic method to find procedure
978 descriptor, to avoid prologue examination when disassembling.
979 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
980 aka MicroMeteor board).
981 (mips_exit_debug): Prevent protocol reinitialization if an error
982 occurs while exiting debug mode.
984 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
986 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
987 comments, formatting, etc. Plus other minor fixes for problems
988 I found during my first pass over the mn10200 port.
989 (mn10200_analyze_prologue): New function.
990 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
991 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
992 comments, formatting, etc. Minor fixes for problems I found during
993 my first pass over the mn10200 port.
994 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
996 (REGISTER_VIRTUAL_TYPE): Define as a long.
997 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
999 (STORE_RETURN_VALUE): Similarly.
1001 * blockframe.c (generic_get_saved_regs): Remove unused variable
1003 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
1004 inside #ifdef CALL_DUMMY.
1005 (watch_command_1): Initialize target_resources_ok.
1006 * command.c (do_setshow_command): Provide dummy initialization
1008 * valops.c (find_function_addr): Move function & prototype inside
1010 (value_arg_coerce): Similarly.
1011 (value_of_variable): Provide dummy initialization of "frame".
1013 start-sanitize-gdbtk
1014 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
1016 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
1019 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
1021 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
1022 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
1024 (scan_xcoff_symtab): Ditto.
1026 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
1028 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
1029 from being sent to 32-bit targets by masking off upper bits.
1030 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
1031 of PC on 32-bit targets.
1032 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
1033 frame setup instruction.
1034 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
1035 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
1036 prologue instruction. Fix warnings and bugs found by gcc -Wall.
1037 * buildsym.c (finish_block): Improve handling of overlapping blocks;
1038 fixes problem on MIPS16 printing function arguments.
1040 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1042 * dwarf2read.c (dwarf2_linkage_name): New function to get
1043 the linkage name of a die from DW_AT_MIPS_linkage_name or
1045 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
1046 new_symbol): Use it instead of accessing DW_AT_name.
1047 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
1048 partial die if present.
1049 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
1051 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
1053 * blockframe.c (generic_frame_chain_valid): If the new frame
1054 is not INNER_THAN the old frame, then it's not valid.
1056 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
1058 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
1059 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
1061 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
1063 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
1064 sd and sw instructions correctly.
1065 (heuristic_proc_start): Add support for MIPS16.
1066 (mips16_get_imm, mips16_heuristic_proc_desc,
1067 mips32_heuristic_proc_desc): New helper functions for
1068 heuristic_proc_desc.
1069 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
1070 (mips_push_arguments): Don't align small arguments in EABI.
1071 (mips32_skip_prologue): Attempt to shrink code size a little.
1073 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1075 * m32r-stub.c: New -- remote protocol support for M32R cpu.
1076 * m32r-rom.c: Several experiments with improved download time.
1078 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
1080 * mips-tdep.c (MIPS16_INSTLEN): Define.
1081 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
1082 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
1083 of function on MIPS16.
1084 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
1085 for mips_skip_prologue.
1086 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
1088 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1090 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
1091 ../sim/common/libcommon.a.
1093 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1095 * blockframe.c: fix a null pointer ref in generic_get_saved_register
1097 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
1099 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
1102 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
1104 First set of changes for mips16:
1105 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
1106 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
1107 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
1108 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
1109 * mem-break.c (memory_breakpoint_from_pc): New function.
1110 (memory_insert_breakpoint, memory_remove_breakpoint): Use
1111 memory_breakpoint_from_pc to determine breakpoint contents and size.
1112 * target.h (memory_breakpoint_from_pc): Declare.
1113 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
1114 to determine size of breakpoint instruction.
1115 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
1116 New helper functions for mips_find_saved_regs.
1117 (mips_find_saved_regs): Recognize mips16 prologues.
1118 (mips_addr_bits_remove): Strip off upper 32 bits of address
1119 when target CPU is 32 bits but CORE_ADDR is 64 bits.
1120 (mips_step_skips_delay): No branch delay slot on mips16.
1121 (gdb_print_insn_mips): Disassemble mips16 code.
1122 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
1124 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
1126 * tm-mn10200.h (NUM_REGS): Decrease to 12.
1127 (REGISTER_NAMES): Elimination registers not found on the mn10200.
1128 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
1129 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
1131 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1133 * dwarf2read.c: Replace integral tag, name and form fields in
1134 internal structure definitions with the corresponding enumeration
1135 types from dwarf2.h. Add default cases to switches on enumerations
1137 Make quoting of string arguments in complaint messages consistent.
1138 Check for NULL returns from DW_STRING.
1139 (struct partial_die_info): Add sibling and has_type fields, remove
1141 (DW_*): Move access macro definitions near the definition of the
1142 attribute structure.
1143 (struct field_info): New structure to pass information about fields
1144 and member functions between die processing routines.
1145 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
1146 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
1147 the partial symbol table if the DW_AT_*_pc attributes are missing.
1148 Add file scope base type definitions to the partial symbol table.
1149 Skip over child dies if the die has a sibling attribute.
1150 (add_partial_symbol): Enter global variables with type attributes
1151 and without location descriptors into the partial symbol table.
1152 Store value of DW_TAG_variable dies in the partial symbol table.
1153 Do not enter global variables into the minimal symbol table.
1154 Add base type definitions to the partial symbol table.
1155 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
1156 (process_die): Move check for DW_AT_low_pc to read_func_scope.
1157 Add a typedef symbol for base type definitions to the symbol table.
1158 Ignore DW_TAG_inlined_subroutine tags for now.
1159 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
1160 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
1161 to determine pc bounds, ignore dies with invalid bounds.
1162 (dwarf2_get_pc_bounds): New routine to extract and validate the
1163 DW_AT_*_pc attributes of a die.
1164 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
1165 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
1166 New functions to handle fields and member functions.
1167 (read_structure_scope): Rewritten to use them.
1168 (read_array_type): Renamed from dwarf_read_array_type.
1169 Default upper array bound to describe an array with unspecified
1171 Create array types in backwards order, as dwarf2 puts out the array
1172 dimensions from left to right.
1173 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
1174 DW_AT_artificial and DW_AT_prototyped.
1175 (read_base_type): Make an unsigned type for DW_ATE_boolean.
1176 Pass objfile to dwarf_base_type.
1177 (read_partial_die): Use read_attribute to read in the attributes.
1178 Handle DW_AT_sibling and DW_AT_type.
1179 Follow references when determining DW_AT_name and DW_AT_external
1180 attributes of the die.
1181 Validate DW_AT_*_pc attributes.
1182 (read_full_die): Use read_attribute to read in the attributes.
1183 (read_attribute): New function to read an attribute described
1184 by an abbreviated attribute.
1185 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
1186 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
1187 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
1188 Change symbol class for global variables with a zero valued location
1189 descriptor to LOC_UNRESOLVED.
1190 Handle DW_AT_const_value attributes for DW_TAG_variable,
1191 DW_TAG_formal_parameter and DW_TAG_enumerator.
1192 Build a typedef symbol for DW_TAG_base_type.
1193 (dwarf2_const_value): New routine to copy a constant value from an
1194 attribute to a symbol.
1195 (dwarf_base_type): Use passed in objfile, not current_objfile
1196 when calling dwarf2_fundamental_type.
1197 (dump_die): Use DW_* accessor macros to access values of attributes.
1198 (decode_locdesc): Handle DW_OP_plus_uconst.
1200 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
1202 * mn10200-tdep.c: New file.
1203 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
1204 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
1205 * config/mn10200/mn10200.mt: New file.
1206 * configure.tgt: add mn10200 entry.
1208 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
1210 * configure.in configure: Check if host has libdl if doing
1213 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
1215 * mn10300-tdep.c: Wrote/fixed implementations of
1216 mn10300_frame_chain, mn10300_init_extra_frame_info,
1217 mn10300_frame_saved_pc
1218 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
1219 and INIT_FRAME_PC macros.
1221 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
1223 * configure.in configure: Check if host has libm. Make sure we
1224 are using gcc when using the -export-dynamic option. Fixes a
1225 problem with building under Solaris/SunPro cc.
1227 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
1229 * config/mips/{embed,embed64,embedl,embedl64}.mt:
1230 Link in simulator on MIPS embedded targets.
1232 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1234 * blockframe.c (frameless_look_for_prologue): Mark frames
1235 with a zero PC as frameless to improve backtraces from core dumps
1236 caused by dereferencing a NULL function pointer.
1238 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
1240 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
1242 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
1244 * mn10300-tdep.c: made a lot more generic, ripping out code
1245 from copied target (no more mn10300_scan_prologue,
1246 init_extra_frame_info, and mn10300_fix_call_dummy calls)
1247 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
1248 and INIT_FRAME_PC macros
1250 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1252 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
1253 FP_REGISTER_BYTES to compute offsets into the saved frame,
1254 since it fails for SPARC targets configured without any
1255 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
1257 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
1259 * symtab.c (fixup_symbol_section): Handle NULL symbols without
1262 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
1264 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
1265 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
1267 * configure configure.in: Clean up test cases around thread support.
1269 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
1272 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
1273 printcmd.c valops.c value.h values.c: Add bfd_section arg to
1274 value_at and value_at_lazy.
1275 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
1276 Add bfd_section arg to prim_record_minimal_symbol_and_info.
1277 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
1278 instead of read_memory. It takes a bfd_section arg.
1279 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
1280 unnecessary cast for assignment of struct dbx_symfile_info.
1281 Struct objfile now uses a real pointer instead of PTR for this
1283 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
1284 text, data and bss into dbx_symfile_info.
1285 * exec.c (xfer_memory): Handle transfers for user-specified
1287 * findvar.c (read_var_value locate_var_value): Copy bfd section
1288 from the symbol to the value.
1289 * gdb-stabs.h: Add section pointers for text, data and bss
1291 * maint.c (translate address command): Add test code for overlay
1292 address translation.
1293 * printcmd.c (do_examine do_one_display): Now takes a bfd section
1295 * (print_formatted x_command): Record current section along with
1296 current address for repeated commands.
1297 * sparc-nat.c (fetch_inferior_registers): Change
1298 target_xfer_memory to target_{read write}_memory to allow changes
1299 to target_xfer_memory interface for section info.
1300 * symmisc.c (dump_msymbols print_symbol): Print section
1301 assocaited with symbol.
1302 * symtab.c (fixup_symbol_section): New routine to
1303 add section info to symbols returned by lookup_symbol.
1304 * symtab.h (struct general_symbol_info): Add bfd section to
1306 * target.c target.h (target_xfer_memory): Add bfd section to
1308 * (target_read_memory_section): New routine to read data from a
1310 * (target_memory_bfd_section): New global variable to pass bfd
1311 section in to targets.
1312 * valarith.c (value_add value_addr value_array): Preserve bfd
1313 section when computing new value.
1314 * value.h (struct value): Add bfd section to values.
1315 * values.c (allocate_value value_copy): Initialize/preserve bfd
1317 * (unpack_double): Clean up _MSC_VER conditionals to remove
1320 * v850ice.c: New module to support communication with NEC's
1322 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
1323 ep names with rxx names. sp and fp are renamed via a different
1327 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
1329 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
1330 also removed code elsewhere that made use of RP_REGNUM.
1331 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
1332 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
1333 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
1334 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
1336 For older changes see ChangeLog-96
1342 version-control: never