1 Fri Aug 18 17:48:55 1995 steve chamberlain <sac@slash.cygnus.com>
3 * dcache.c (dcache_write_line): Write dirty lines right.
5 Fri Aug 18 06:26:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
7 * sparc-tdep.c (isbranch): Fix typo which caused wrong
8 target addresses for annulled branches.
10 Wed Aug 16 21:54:39 1995 Jeff Law (law@snake.cs.utah.edu)
12 * config/pa/tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Define.
14 Tue Aug 15 07:51:21 1995 steve chamberlain <sac@slash.cygnus.com>
16 * remote.c (remote_write_bytes): Chop up large transfers.
18 Mon Aug 14 17:56:36 1995 Stan Shebs <shebs@andros.cygnus.com>
20 * gcc.patch: Remove, relevant only to long-ago versions of GCC.
22 Mon Aug 14 13:43:01 1995 Kung Hsu <kung@mexican.cygnus.com>
24 * config/sparc/tm-sparclite.h: Define FRAME_CHAIN_VALID_ALTERNATE.
25 * blockframe.c (inside_main_func): If main func addr range not set,
28 Sat Aug 12 15:34:54 1995 Jeffrey A. Law <law@rtl.cygnus.com>
30 * config/powerpc/xm-aix.h (FIVE_ARG_PTRACE): Define.
31 * config/rs6000/xm-rs6000.h (FIVE_ARG_PTRACE): Likewise.
33 * configure.in: Recognize aix4 specially as some aspects
34 of aix4 need different handling than aix3.
36 * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
37 specific to aix4 support on the power pc.
38 * config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
39 not defined. The aix4 specific target files will do that.
40 * config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
41 specific to aix4 support on the rs6000.
43 * config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
44 do the conversion if the pointer is not a magic aix function
46 * rs6000-tdep.c: Include objfiles.h and symtab.h.
47 (is_magic_function_pointer): New function.
49 * rs6000-tdep.c (skip_prologue): Refine check for frameless
50 functions. Handle b .+4 emitted by aix4 compilers. Only
51 allow one load of a minimal toc pointer. Handle aix4 compiler's
54 * rs6000-tdep.c (find_toc_address): Report an error if no toc was
55 found rather than possibly core dumping.
57 * partial-stab.h: Handle extra field generated by the aix4 compiler
59 * stabsread.c (read_enum_type): Likewise.
61 Sat Aug 12 03:18:04 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
63 * rs6000-tdep.c (extract_return_value): Fix returning of values
64 whose length is less than the register size for big endian targets.
66 Fri Aug 11 13:04:32 1995 Kung Hsu <kung@mexican.cygnus.com>
68 * symtab.c (list_symbols): if break command set breakpoint on
71 Wed Aug 9 18:59:05 1995 Fred Fish <fnf@cygnus.com>
73 * defs.h (strchr, strrchr, strstr, strtok, strerror): Enclose in
74 #ifndefs to protect against previous definitions as macros.
76 Wed Aug 9 14:51:36 1995 Kung Hsu <kung@mexican.cygnus.com>
78 * xcoffread.c (xcoff_symfile_offset): Revert an unwanted change
79 that got in accidentally with Aug 1 change.
81 Sat Aug 5 09:07:28 1995 steve chamberlain <sac@slash.cygnus.com>
83 * remote-hms.c (hms_cmds): Get reg term right.
84 * monitor.c (monitor_fetch_register): If we see
85 a non-hex digit, just stop reading.
86 * remote.c (remote_wait): Change way $O is handled.
88 Wed Aug 9 11:42:36 1995 Jeffrey A. Law <law@rtl.cygnus.com>
90 * configure.in (powerpc-*-aix*): Recognize as a new gdb host
92 (powerpc-*-eabi*): Don't set configdirs.
93 (powerpcle-*-eabi*): Likewise.
95 * rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
96 for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
98 * config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
99 for powerpc running aix4.
100 * config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
101 and host include files for powerpc running aix4.
103 Wed Aug 9 08:11:45 1995 Stan Shebs <shebs@cygnus.com>
105 * top.c (target_output_hook): Really make it match defs.h (char *
106 is not the same as unsigned char *).
108 Tue Aug 8 15:13:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
110 * Makefile.in (CXX_FOR_TARGET): Don't use ${rootme}/../gcc/xgcc
111 unless it is present.
113 Tue Aug 8 10:50:15 1995 Jeffrey A. Law <law@rtl.cygnus.com>
115 * top.c (target_output_hook): Make declaration match the one
118 * symfile.c (add_psymbol_to_list): Initialize SYMBOL_SECTION.
119 (add_psymbol_addr_to_list): Likewise.
120 * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Likewise.
122 Mon Aug 7 15:34:29 1995 steve chamberlain <sac@slash.cygnus.com>
124 * top.c (target_output_hook): New definition.
125 * stack.c (gdb_string.h): Include after defs.h
126 * defs.h (target_output_hook): New declaration.
127 * source.c (mod_path): Fix Win32 \ handling.
129 Sun Aug 6 22:14:25 1995 Jeff Law (law@snake.cs.utah.edu)
131 * hppa-tdep.c (frame_saved_pc): Don't try to dig a return pointer
132 out of a long branch stub.
134 Fri Aug 4 13:37:31 1995 Jeffrey A. Law <law@rtl.cygnus.com>
136 * xcoffread.c (process_linenos): Fix typo in last change.
138 Thu Aug 3 22:01:26 1995 Fred Fish <fnf@rtl.cygnus.com>
140 * ch-exp.y (write_lower_upper_value): Add prototype so bison
141 generated parser will insert prototype before first func usage.
142 Bison and byacc order the output sections differently. Also
143 make function static.
145 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
147 * Update all FSF addresses except those in COPYING* files.
149 Thu Aug 3 01:38:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
151 * config/alpha/tm-alpha.h (EXTRA_FRAME_INFO): Add pc_reg field.
152 (SKIP_TRAMPOLINE_CODE): Define.
153 * alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
154 frame to find the saved pc register.
155 (alpha_saved_pc_after_call): Skip over shared library trampoline
156 before trying to find the saved pc register.
157 (find_proc_desc): Copy PROC_PC_REG from found proc_desc
158 to heuristic proc_desc.
159 (init_extra_frame_info): Initialize pc_reg field in frame.
161 Wed Aug 2 18:00:36 1995 Stan Shebs <shebs@andros.cygnus.com>
163 * configure.in (m68*-est-*): Use monitor target config.
165 * config/m68k/est.mt, config/m68k/tm-est.h: Delete.
166 * config/m68k/monitor.mt, config/m68k/tm-monitor.h: Fix comments.
168 Tue Aug 1 22:52:53 1995 Fred Fish <fnf@cygnus.com>
170 * Makefile.in (VERSION): Bump to 4.14.2
172 Tue Aug 1 16:04:36 1995 Kung Hsu <kung@mexican.cygnus.com>
174 * xcoffread.c (process_linenos): The value in include file symbol
175 should point to line number table. Currently this value is not
176 set correctly by AIX ld. A fix to get around this bug.
178 Tue Aug 1 11:44:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
180 * configure.in: Check for working mmap, ansi headers, string.h,
181 strings.h, and memory.h.
182 * configure: Regenerated.
184 * gdb_stat.h: New file, "portable" <sys/stat.h>.
185 * gdb_string.h: New file, "portable" <string.h>.
187 * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
188 convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
189 gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
190 i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
191 mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
192 rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
193 symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
194 ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
195 instead of <sys/stat.h>.
197 * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
198 ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
199 core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
200 dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
201 exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
202 fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
203 inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
204 m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
205 monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
206 printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
207 remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
208 remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
209 remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
210 remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
211 remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
212 solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
213 symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
214 valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
215 "gdb_string.h" instead of <string.h>.
220 * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
221 sparc/xm-sun4os4.h (HAVE_MMAP): Removed.
223 * config/xm-lynx.h, config/i386/xm-ptx.h,
224 config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
225 config/mips/xm-irix3.h, config/mips/xm-mips.h,
226 config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
227 config/pa/hppah.h, config/rs6000/xm-rs6000.h,
228 config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
229 config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
230 config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
231 * config/mips/xm-irix3.h, config/mips/xm-mips.h,
232 config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
234 Tue Aug 1 02:08:30 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
236 * mips-tdep.c (mips_extract_return_value): Fix returning of
237 values whose length is less than the register size for big endian
239 * alpha-tdep.c (alpha_extract_return_value,
240 alpha_store_return_value): Use alpha_convert_register_to_*
241 to handle functions returning "float" correctly.
243 Mon Jul 31 19:12:48 1995 Stan Shebs <shebs@andros.cygnus.com>
245 * h8500-tdep.c: General linting and cleanup.
246 (opcodes/h8500-opc.h): Don't include.
247 (code_size, data_size): Make static.
248 (frame_locals_address, frame_args_address): Remove.
249 (h8300_pop_frame): Rename to h8500_pop_frame.
250 (big_command, medium_command, compact_command, small_command):
251 Define as regular functions rather than with macro trickery.
252 (tm_print_insn): Set to correct disassembler function.
253 * config/h8500/tm-h8500.h: Minor cleanup, add prototypes.
254 (ABOUT_TO_RETURN): #if 0 out.
255 (FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS): Use usual define.
256 (GDB_TARGET_IS_H8500): Remove duplicate definition.
257 (regoff): Remove, never used.
258 * config/h8500/h8500.mt (TDEPFILES): Add monitor.o.
260 Mon Jul 31 14:32:30 1995 J.T. Conklin <jtc@rtl.cygnus.com>
262 * configure.in: Check for unistd.h.
263 * configure: Regenerated.
265 * command.c, cp-valprint.c, fork-child.c, i386-tdep.c,
266 i386b-nat.c, inflow.c, main.c, maint.c, objfiles.c, solib.c,
267 source.c, stack.c, symfile.c, top.c, utils.c: Include strings.h
268 and/or unistd.h to bring prototypes into scope.
270 Sun Jul 30 01:40:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
272 * rs6000-tdep.c (frame_saved_pc): Check for signal handler caller
273 before trying to determine the start of the function.
274 (skip_prologue): Skip subroutine call which might save the
275 floating point registers only if it is within the first three
277 Reinstate setting of alloca_reg if setup of a gcc frame pointer
279 (frame_get_cache_fsr): Use new fields in rs6000_framedata.
281 Sat Jul 29 14:43:35 1995 Stan Shebs <shebs@andros.cygnus.com>
283 * sparclite: Removed subdirectory. aload and eload are now in
284 utils/sparclite, low-level library is in libgloss.
285 * configure.in (sparclite*): Don't configure sparclite subdir.
287 * Makefile.in (TARDIRS): Remove, no longer used.
289 Sat Jul 29 01:45:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
291 * procfs.c (unconditionally_kill_inferior): Clear current signal
292 if PROCFS_NEED_CLEAR_CURSIG_FOR_KILL is defined.
293 * config/alpha/nm-osf3.h (PROCFS_NEED_CLEAR_CURSIG_FOR_KILL): Define.
295 * alpha-tdep.c: Move sigtramp handling of saved registers from
296 read_next_frame_reg to alpha_find_saved_regs, handle saved
297 floating point registers.
298 * mips-tdep.c: Move sigtramp handling of saved registers from
299 read_next_frame_reg to mips_find_saved_regs, handle saved
300 floating point registers.
301 * config/mips/tm-irix3.h, config/mips/tm-irix5.h,
302 config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF): Define.
304 * sparc-tdep.c (sparc_pc_adjust): Fix check for `unimp'
305 instruction to handle functions returning structures with
306 large sizes properly.
308 Fri Jul 28 11:50:17 1995 steve chamberlain <sac@slash.cygnus.com>
310 * configure, configure.in (z8k-*-sim): deleted.
312 Thu Jul 27 12:49:28 1995 Jeffrey A. Law <law@rtl.cygnus.com>
314 * lynx-nat.c (child_wait): Handle threads exiting.
316 Thu Jul 27 07:47:50 1995 Michael Meissner <meissner@cygnus.com>
318 * rs6000-tdep.c (skip_prologue): Don't assume the update stack
319 instruction is the last in the prologue, since xlc stores the lr
320 after the stack update. Make sure offset is correct sign for
322 (frame_saved_pc): Move test for signal before frameless.
324 * config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Define.
325 * config/powerpc/tm-ppc-eabi.h (DEFAULT_LR_SAVE): Redefine.
327 Thu Jul 27 01:22:08 1995 Jeffrey A. Law <law@rtl.cygnus.com>
329 * hppa-tdep.c (hppa_fix_call_dummy): Rewrite code for calling
330 into shared libraries.
332 Wed Jul 26 23:33:34 1995 Michael Meissner <meissner@cygnus.com>
334 * config/rs6000/tm-rs6000.h (rs6000_framedata): Add offsets the
335 gprs, fprs, lr, and cr is stored at.
336 (FRAME_FIND_SAVED_REGS): Use new fields in rs6000_framedata.
337 (function_frame_info): Delete declaration.
338 (SKIP_PROLOGUE): Skip_prologue is now passed a rs6000_framedata
339 structure to fill in.
340 (FRAMELESS_FUNCTION_INVOCATION): Function now longer takes a
342 (FRAME_SAVED_PC): Call frame_saved_pc.
344 * rs6000-tdep.c (skip_prologue): Recognize V.4 prologues as well
345 as AIX style. Fill in rs6000_framedata structure. Remember where
346 the gprs, fprs, cr, and lr are saved.
347 (pop_frame): Use skip_prologue, not function_frame_info, and use
348 new rs6000_framedata fields.
349 (function_frame_info): Function deleted.
350 (frameless_function_invocation): Separate frame_saved_pc support
351 to new function. Recognize V.4 frames.
352 (frame_saved_pc): New function.
353 (frame_get_cache_fsr): Use skip_prologue, not function_frame_info.
354 (frame_initial_stack_address): Ditto.
356 Wed Jul 26 01:00:37 1995 Jeff Law (law@snake.cs.utah.edu)
358 * remote.c: Add documentation for extended protocol operations
359 and for thread_alive change from a couple weeks ago.
360 (extended_remote_ops): Declare and define a new target vector
361 for the extended remote protocol.
362 (extended_remote_restart): New function to restart the remote
364 (remote_open): Just a stub routine.
365 (extended_remote_open): New function to start a remote session
366 using the extended gdb remote protocol.
367 (remote_open_1): New function containing code common to both
368 remote_open and extended_remote_open.
369 (remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly.
370 (extended_remote_create_inferior): New function for the extended
372 (initialize_remote): Add the extended_remote_ops target vector.
373 * gdbserver/server.c (main, case '!'): Set extended_protocol.
374 (main, case 'k'): If the extended protocol is in use, kill the
375 inferior then start a new one.
376 (main, case 'R'): New command to restart the remote server and
377 inferior process. Only supported when using the extended
379 (main, server loop): If the inferior terminates while using the
380 extended protocol then start a new one. If getpkt fails when
381 using the extended protocol then exit.
383 Tue Jul 25 11:43:44 1995 Stan Shebs <shebs@andros.cygnus.com>
385 * mdebugread.c (psymtab_to_symtab_1): Relocate encoded stab
386 line numbers using the psymtab's section offsets.
388 Tue Jul 25 10:43:27 1995 Michael Meissner <meissner@tiktok.cygnus.com>
390 * config/rs6000/tm-rs6000.h (rs6000_framedata): Rename from
391 aix_framedata. Change all uses.
392 * rs6000-tdep.c: Change all aix_framedata -> rs6000_framedata.
394 Sat Jul 22 23:44:18 1995 Jeff Law (law@snake.cs.utah.edu)
396 * defs.h (ATTR_FORMAT): Disable if ANSI_PROTOTYPES is not defined.
398 Fri Jul 21 16:50:28 1995 Jeffrey A. Law <law@rtl.cygnus.com>
400 * lynx-nat.c (child_thread_alive): New function. Somehow I
401 forgot to check this in with all the other thread_alive changes.
403 Thu Jul 20 22:22:34 1995 Jeff Law (law@snake.cs.utah.edu)
405 * somread.c (som_symtab_read): Add unsatisfied common symbols to
406 the minimal symbol table. All common symbols are "unsatisfied"
407 when -E is passed to the linker.
409 Thu Jul 20 15:04:57 1995 Fred Fish <fnf@cygnus.com>
411 * top.c (show_endian): Cast first arg of printf_unfiltered to
412 correct type of "char *".
414 Thu Jul 20 14:18:51 1995 Jeffrey A. Law <law@rtl.cygnus.com>
416 * lynx-nat.c (child_wait): A thread_id of zero from wait apparently
417 means the process is single threaded, so there's no need to add
418 it to the thread list. Handle case where multi-threaded process
419 reverts back to a single-threaded process.
421 * gdbserver/low-hppabsd.c: Remove error declaration.
422 * gdbserver/low-sparc.c: Likewise.
423 * gdbserver/low-sun3.c: Likewise.
424 * gdbserver/server.h: Remove error and fatal declaration.
425 * gdbserver/utils.c (error): Update to be compatable with recent
429 Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
431 * config/m68k/tm-m68kv4.h (DWARF_REG_TO_REGNUM): Define to
432 correctly map floating point registers numbers.
434 * dwarfread.c (locval, new_symbol): Handle variables that are
437 * mdebugread.c: Replace all uses of builtin_type_* with
438 mdebug_type_*. Define and initialize mdebug_type_*.
440 * serial.h (serial_close): Add additional argument `really_close'.
441 (SERIAL_CLOSE): Update serial_close call accordingly.
442 (SERIAL_UN_FDOPEN): Use serial_close to handle refcnt properly.
443 * serial.c (serial_close): Handle `really_close'.
444 * serial.h (scb_base): Moved to serial.c, made static.
446 * valops.c (value_addr): Don't coerce arrays.
447 (typecmp): Coerce arrays instead of calling value_addr if necessary.
449 Wed Jul 19 18:19:28 1995 Stan Shebs <shebs@andros.cygnus.com>
451 From Richard Earnshaw (rearnsha@armltd.co.uk):
452 * infrun.c (wait_for_inferior): Set the convenience variable
453 $_exitcode to the termination code of the inferior.
454 * top.c (quit_command): Accept optional expression to use
455 as parameter to exit().
457 Wed Jul 19 13:15:32 1995 Kung Hsu <kung@mexican.cygnus.com>
459 * remote.c (remote_wait): When getting registers, check endianess and
460 do conversion if necessary.
462 Tue Jul 18 00:41:31 1995 Jeff Law (law@snake.cs.utah.edu)
464 * gdbserver/low-hppabsd.c: New file.
465 * gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
466 * config/pa/hppabsd.mh (XDEPFILES): Add ser-tcp.o.
467 (GDBSERVER_DEPFILES): Add low-hppabsd.o.
468 * config/pa/hppaosf.mh: Likewise.
470 Mon Jul 17 21:35:18 1995 Fred Fish <fnf@cygnus.com>
472 * dache.c (struct dcache_block): Change data member from unsigned
473 char to char, since everything passed in and out of dcache is char
474 or casted to appropriate type anyway.
475 (dcache_alloc): Move assignment of db out of test and combine
476 separate tests into if-else.
477 (dcache_peek_byte): Change ptr from unsigned char* to char*.
478 (dcache_peek_byte): Remove now unnecessary cast in read_memory call.
479 (dcache_peek): Change cast of incoming data arg.
480 (dcache_poke): Change cast of addr of incoming data arg.
481 (dcache_info): Mask data passed to printf_filtered to lsbyte only.
482 (dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
483 * target.c (debug_to_thread_alive): Change return type to int and
484 return zero, for type compatibility with other *_thread_alive
486 (cleanup_target): Change cast of ignore function to match type of the
487 to_thread_alive member.
488 * defs.h (error_hook): Add ATTR_NORETURN.
489 * defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
490 __attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
491 * remote.c (remote_wait): Cast first arg to strtol, strchr, and
492 strncmp to "const char *" from "unsigned char *".
493 (remote_wait): Cast arg to putpkt and strcpy from "unsigned char *"
495 (remote_wait): Change printf format for long arg from "%d" to "%ld".
496 (getpkt): Remove unused variable "bp".
497 (remote_fetch_word, remote_store_word): Ifdef out apparently unused
499 * breakpoint.c (watchpoint_check): Removed unused variables
500 "saved_level" and "saved_frame".
501 * valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
502 default cases to switch for completeness.
503 * infrun.c (wait_for_inferior): Enclose "have_waited" label
504 in #ifdef that matches the one in which it is referenced.
505 * ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
506 unused variable "state" in #ifdef that matches one in which it is
508 * eval.c (evaluate_subexp_standard): Remove unused variable "var".
509 * eval.c (evaluate_subexp_standard): Remove unused variable
511 * valarith.c (value_subscript): Remove unused variable
512 "lowerbound", which is redeclared in a nested scope prior to use.
513 * printcmd.c (print_frame_nameless_args): Use "%ld" to print long
515 * {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
516 Remove unused static var "check_break_insn_size".
517 * buildsym.c (finish_block): Add other enum LOC_* and default
518 cases to switch for completeness.
519 ch-lang.c (type_lower_upper): Removed unused label "retry".
520 Add other enum TYPE_* and default cases to switch for completeness.
521 * f-typeprint.c (f_type_print_args): Ifdef out unused function
522 that may be used someday when Fortran support is complete.
523 * ch-valprint.c (chill_print_type_scalar): Add other enum
524 TYPE_* and default cases to switch for completeness.
525 (chill_val_print): Remove unused local var "high_bound" that
526 is redeclared in a nested scope prior to use.
527 (chill_var_print): Use "%ld" to print long arg, not "%d".
528 * regex.c (re_compile_fastmap, re_match_2): Add remaining enum
529 types and default to switches for completeness.
530 * minsyms.c (lookup_minimal_symbol_text): Delete unused variable
532 (prim_record_minimal_symbol_and_info): Return NULL rather than
534 * elfread.c (elf_symtab_read): Don't dereference NULL returns from
535 record_minimal_symbol_and_info.
536 * f-lang.c (saved_function_list_end): Ifdef out unused variable
537 that may be used someday.
538 * f-valprint.c (f_val_print): Remove unused local "straddr".
540 Mon Jul 17 13:08:00 1995 Ian Lance Taylor <ian@cygnus.com>
542 * stabsread.h (struct stab_section_list): Define.
543 (coffstab_build_psymtabs): Remove staboff and stabsize parameters.
544 Add textaddr, textsize, and stabs parameters.
545 * gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
546 Add text_addr and text_size fields.
547 (DBX_TEXT_SECT): Don't define.
548 (DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
549 * coffread.c: Include <ctype.h>.
550 (struct coff_symfile_info): Remove stabsect and stabindexsect
551 fields. Add textaddr, textsize, and stabsects fields.
552 (coff_locate_sections): Record the address of the .text section,
553 and total the sizes of all sections with names beginning with
554 ".text". Don't bother to record a .stab.index section (COFF
555 doesn't use them). Make a linked list of all sections with names
556 beginning with ".stab".
557 (coff_symfile_read): Adjust call to coffstab_build_psymtabs for
559 * dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
560 DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
561 (dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
563 (elfstab_build_psymtabs): Likewise.
564 (stabsect_build_psymtabs): Likewise.
565 (symbuf_sections, symbuf_left, symbuf_read): New static variables.
566 (fill_symbuf): If symbuf_sections is not NULL, read symbols from
568 (coffstab_build_psymtabs): Remove staboffset and stabsize
569 parameters. Add textaddr, textsize, and stabsects parameters.
570 Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
571 multiple stabs sections.
572 * os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
573 DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
574 (os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
577 * remote-vx.c (vx_ops, vx_run_ops): Initialize new to_thread_alive
580 Sat Jul 15 01:02:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
582 * config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: New files
583 for OSF/1-3.x procfs support.
584 * configure.in (alpha-dec-osf): Use them when configuring
586 * configure: Updated.
587 * target.c: Include <string.h>.
589 Fri Jul 14 16:16:56 1995 J.T. Conklin <jtc@rtl.cygnus.com>
591 * Makefile.in, configure.in: Use one variable, frags, to hold
592 pathnames of makefile fragments.
593 * configure: regenerated.
595 Fri Jul 14 09:49:47 1995 Jeff Law (law@snake.cs.utah.edu)
597 * procfs.c (procfs_ops): Fix typo in last change.
599 Thu Jul 13 13:42:38 1995 Jeffrey A. Law <law@rtl.cygnus.com>
601 * inftarg.c (child_thread_alive): New function to see if a
602 particular thread is still running.
603 (child_ops): Add child_thread_alive entry.
604 * remote.c (remote_thread_alive): New function to see if a
605 particular thread is still alive.
606 (remote_ops): Add remote_thread_alive.
607 * target.c (dummy_target): Add dummy entry for thread_alive.
608 (cleanup_target): de_fault thread_alive too.
609 (update_current_target): INHERIT thread_alive too.
610 (debug_to_thread_alive): New function.
611 (setup_target_debug): Add debug_to_thread_alive.
612 * target.h (struct target_ops): Add to_thread_alive.
613 (target_thread_alive): Define.
614 * thread.c (info_threads_command): Don't call kill; use
615 target_thread_alive instead.
616 * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define.
617 * gdbserver/low-lynx.c (mythread_alive): New function.
618 (mywait): Don't restart any threads after a new thread notification,
619 let the generic code handle it.
620 * gdbserver/low-sparc.c (mythread_alive): Dummy version.
621 * gdbserver/low-sun3.c (mythread_alive): Likewise.
622 * gdbserver/server.c (main): Handle thread_alive requests.
623 * gdbserver/server.h (mythread_alive): Declare.
624 * corelow.c (core_ops): Add dummy entry for thread_alive.
625 * exec.c (exec_ops): Likewise.
626 * m3-nat.c (m3_ops): Likewise.
627 * monitor.c (monitor_ops): Likewise.
628 * procfs.c (procfs_ops): Likewise.
629 * remote-arc.c (arc_ops): Likewise.
630 * remote-array.c (array_ops): Likewise.
631 * remote-e7000.c (e7000_ops): Likewise.
632 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
633 * remote-mips.c (mips_ops): Likewise.
634 * remote-pa.c (remote_hppro_ops): Likewise.
635 * remote-sim.c (gdbsim_ops): Likewise.
636 * sparcl-tdep.c (sparclite_ops): Likewise.
638 Tue Jul 11 11:15:55 1995 Kung Hsu <kung@rtl.cygnus.com>
640 * solib.c: Add _DYNAMIC__MGC base symbol for Mentor Graphics Inc.
641 * solib.c (match_main): New function for checking name of main.
642 * solib.c (solib_add): Not to add if solib match main.
644 Fri Jul 7 14:41:56 1995 Kung Hsu <kung@rtl.cygnus.com>
646 * elfread.c (elf_symtab_read): Fix a bug ignoring compiler
647 generated internal labels ($LM...).
649 Wed Jul 5 11:38:36 1995 Kung Hsu <kung@rtl.cygnus.com>
651 * defs.h: if __GO32__ or WIN32 the directory separating symbol should
654 * remote-nindy (nindy_wait): Use infinite timeout reading after
657 Tue Jul 4 10:30:22 1995 Jeffrey A. Law <law@rtl.cygnus.com>
659 * infrun.c (wait_for_inferior): When switching from one thread to
660 another, save infrun's state for the old thread and load infrun's
661 previous state for the new thread.
662 * thread.c (struct thread_info): Add new fields for thread specific
663 state saved/restored in infrun.c.
664 (add_thread): Initialize new fields.
665 (load_infrun_state): New function.
666 (save_infrun_state): New function.
667 * thread.h (load_infrun_state): Provide external decl.
668 (save_infrun_state): Likewise.
670 * infrun.c (wait_for_inferior): When we hit a breakpoint for the
671 wrong thread, make sure to write the fixed PC value into the thread
672 that stopped. Restart all threads after single stepping over a
673 breakpoint for a different thread.
674 * breakpoint.c (set_momentary_breakpoint): Make momentary
675 breakpoints thread specific in a multi-threaded program.
676 * lynx-nat.c (child_resume): Add some comments. Correctly
677 choose between the single and multi-threaded step and continue
680 Fri Jun 30 16:15:36 1995 Stan Shebs <shebs@andros.cygnus.com>
682 * config/h8300/h8300.mt: Renamed from h8300hms.mt.
683 * config/h8500/h8500.mt: Renamed from h8500hms.mt.
684 * config/z8k/z8k.mt: Renamed from z8ksim.mt.
685 * configure, configure.in: Update to reflect renamings.
687 * remote-sim.c (sim): New command, passes commands to simulator.
688 (simulator_command): New function.
689 (gdbsim_ops): Clean up.
690 * remote-sim.h (sim_do_command): Declare.
691 * sh-tdep.c (memory_size): Remove command.
693 * Makefile.in (SIM, SIM_OBS): New variables.
694 (CLIBS, CDEPS): Add value of SIM.
695 (DEPFILES): Add value of SIM_OBS
697 * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt,
698 config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt,
699 config/z8k/z8k.mt: Remove simulator files from TDEPFILES,
700 define in SIM_OBS and SIM.
701 config/sparc/sp64sim.mt (SIMFILES): Remove.
703 * remote-z8k.c: Remove, was superseded by remote-sim.c
704 * Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
706 Sun Jun 25 15:30:43 1995 Stan Shebs <shebs@cygnus.com>
708 * remote.c (remote_read_bytes, remote_write_bytes): Second arg
709 should be char *, not unsigned char *.
710 * dcache.h (memxferfunc): Ditto.
711 * monitor.c (monitor_write_memory, monitor_read_memory_single):
713 (monitor_make_srec): Let compiler figure size of hextab.
715 Sat Jun 24 19:27:37 1995 Jeffrey A. Law <law@rtl.cygnus.com>
717 * lynx-nat.c (child_wait): Don't restart new threads and loop
718 to the top of child_wait; let the machine independent code in
719 wait_for_inferior deal with new thread notifications.
721 Fri Jun 23 11:51:58 1995 Kung Hsu <kung@mexican.cygnus.com>
723 * remote-nindy (nindy_load): Put in target specific load, it's
726 Thu Jun 22 20:21:59 1995 Stan Shebs <shebs@andros.cygnus.com>
728 * utils.c (error): Move local `args' outside conditional,
729 move local `string1' inside, declare function as void if
730 non-ANSI compiler, dereference error_hook when calling.
732 * mac-xdep.c (stdarg.h): Don't include.
734 Thu Jun 22 13:12:33 1995 Kung Hsu <kung@mexican.cygnus.com>
736 * remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR.
738 Wed Jun 21 13:24:41 1995 Jeff Law (law@snake.cs.utah.edu)
740 * hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and
741 HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE.
743 Wed Jun 21 05:57:56 1995 Steve Chamberlain <sac@slash.cygnus.com>
745 * monitor.c: Turn on caching.
746 (monitor_printf): If a ^C was sent, don't expect to see its
748 (monitor_open): Enable caching.
749 (monitor_resume, monitor_load): Flush cache.
750 (monitor_xfer_memory): Call cache routine.
751 (monitor_dump_regs): New.
752 (monitor_fetch_registers): If monitor_dump_regs available
754 (monitor_load): Don't ref exec_bfd if it's NULL.
755 (monitor_load_srec): Use new monitor_make_srec calling convention.
756 (monitor_make_srec): Rewrite to cope with two, three and four byte
758 * remote-hms.c (hms_cmds): Initialze end-of-command delim.
759 * dcache.h, dcache.h: Rewritten.
760 * remote.c: Reenable caching.
761 (getpkt): Reduce MAX_TRIES to 3.
762 (remote_xfer_memory): Use dcache_xfer_memory.
763 * defs.h (error_hook): New.
764 * top.c (error_hook): New definition.
765 * utils.c (error): Use error_hook if initialized.
766 * sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
767 HAVE_SOCKETS in place of #ifndef GO32.
769 Tue Jun 20 22:17:44 1995 Jeff Law (law@snake.cs.utah.edu)
771 * config/pa/tm-hppa.h (PSW_*): Define processor status word masks.
772 (INSTRUCTION_NULLIFIED): Allow specific targets to override.
773 * config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
774 around losing mach kernel behavior.
776 Tue Jun 20 12:03:36 1995 Stan Shebs <shebs@andros.cygnus.com>
778 * monitor.c (monitor_wait): Don't use the watchdog timeout
780 * w89k-rom.c (w89k_open): Define to be static.
783 Tue Jun 20 10:19:40 1995 Stu Grossman (grossman@cygnus.com)
785 * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free.
787 * gdbtk.tcl (add_breakpoint_frame): Add more fields.
788 * (create_file_win create_asm_win build_framework): Create null
789 bindings for meta keys to keep window from dropping down to
790 insertion point when meta is pressed by itself. New bindings:
791 Up/Down - Scroll up/down one line at a time
792 Next/Prior - Scroll up/down one page at a time
793 Home/End - Warp to current pc/end of file
794 * (build_framework): Turn on breakpoint menu.
795 * (create_command_window): Implement tab completion. Add binding
796 for ^C to stop target.
799 Sat Jun 17 10:17:16 1995 Jeff Law (law@snake.cs.utah.edu)
801 * somsolib.c (som_solib_add): Validate regexp argument.
802 Don't assume the first entry on dld's library list is the main
803 program. Don't load the same library more than once and don't
804 consider the main program a shared library.
805 (som_solib_sharedlibrary_command): New function
806 (_initialize_som_solib): Add "sharedlibrary" command.
808 Thu Jun 15 14:54:58 1995 Stan Shebs <shebs@andros.cygnus.com>
810 * array-rom.c: Remove, no longer used.
812 * remote-hms.c (hms_open): Make static.
814 * mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
815 not {MPW}Interfaces:CIncludes.
816 * ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
818 Wed Jun 14 14:27:07 1995 Per Bothner <bothner@kalessin.cygnus.com>
820 * ch-exp.y: Remove lots of unsupported productions and names.
821 Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR.
823 Tue Jun 13 21:40:11 1995 Per Bothner <bothner@kalessin.cygnus.com>
825 * parser-defs.h (enum precedence): Added PREC_BUILTIN_FUNCTION.
826 * expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
828 * expprint.c (dump_expression): Handle the new exp_opcodes.
829 (print_subexp): Handle PREC_BUILTIN_FUNCTION.
830 (print_simple_m2_func): Removed.
831 (print_subexp): Remove support for Modula2 builtin functions.
832 * m2-lang.c (m2_op_print_tab): Add support for builtin functions.
833 * ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
834 (write_lower_upper_value): Convenience function for LOWER and UPPER.
835 (upper_lower_argument, length_argument): Removed non-terminals.
836 * ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
837 (type_lower_upper): New function. Calculate LOWER/UPPER of type.
838 (value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
839 (evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
841 Mon Jun 12 12:48:13 1995 Stan Shebs <shebs@andros.cygnus.com>
843 Windows support bits from Steve Chamberlain <sac@slash.cygnus.com>.
844 * defs.h: Don't declare strchr and friends if WIN32.
845 (DIRNAME_SEPARATOR): Move here from source.c.
846 (SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
847 symbolic definitions for filename bits.
848 * top.c (cd_command): Use these.
849 * source.c (mod_path, openp): Ditto.
850 * terminal.h: Disable termio/sgtty definitions if WIN32.
851 * findvar.c (registers_changed): Call registers_changed_hook
854 Mon Jun 12 12:22:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
856 * Makefile.in (distclean, realclean): Remove config.cache and
859 Mon Jun 12 00:21:59 1995 Jeff Law (law@snake.cs.utah.edu)
861 * somsolib.c: Include gdb-stabs.h.
862 (som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1,
863 etc. Initialize offsets for RODATA & BSS too.
865 Sat Jun 10 17:59:11 1995 Jeff Law (law@snake.cs.utah.edu)
867 * hppa-tdep.c (frame_chain): Try to compensate for incomplete
868 register information in core files when backtracing.
870 Fri Jun 9 14:51:38 1995 Stu Grossman (grossman@cygnus.com)
872 * remote-nrom.c: Remove everything but download code. More
875 Thu Jun 8 15:06:00 1995 Stu Grossman (grossman@cygnus.com)
877 * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
878 for `watchdog' variable. This allows the user to put an upper
879 limit on the amount of time that GDB will wait for the target to
880 return from a step or continue operation. This will primarily be
881 used for the testsuite, where it is difficult to come up with a
882 reasonable timeout for things like function calls, which can take
883 as long as three minutes under some circumstances. If the
884 watchdog timer expires, GDB will generate an error that looks like
885 `Watchdog has expired.', and will detach from the target.
887 * remote-mips.c (mips_open): Setup initial frame from target.
888 Print it out so that user is told where the program is stopped
891 * remote-nrom.c: Loads of cleanups. Use serial code to open
892 network connections. Use expect() to wait for response to
895 * ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
897 * serial.c serial.h (serial_open serial_fdopen serial_close):
898 Allow users to open the same device multiple times. They all get
899 to share the same serial_t. This is about the only way to have
900 multiple active targets use the same device (for download and
903 * sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
905 * target.c: Add `targetdebug' variable. If this is non-zero,
906 then a special target is put at the top of the target stack which
907 will cause all calls through the target vector to have their args
908 and results printed out.
910 Wed Jun 7 17:40:37 1995 Per Bothner <bothner@kalessin.cygnus.com>
912 * ch-exp.y: Handle <primitive_value> "->" <modename>.
914 Wed Jun 7 17:46:33 1995 Michael Meissner <meissner@tiktok.cygnus.com>
916 * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and
917 {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine.
918 (BIG_BREAKPOINT): Ditto.
920 * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either
921 BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte
924 Wed Jun 7 12:41:42 1995 Jeff Law (law@snake.cs.utah.edu)
926 * somsolib.c (som_solib_section_offsets): Handle relative pathnames.
928 * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal
929 handler in dynamically linked executables.
931 Tue Jun 6 10:44:25 1995 Michael Meissner <meissner@tiktok.cygnus.com>
933 From Andrew Cagney <cagney@highland.com.au>
934 * rs6000-tdep.c (single_step): Handle both little and big endian
936 (gdb_print_insn_powerpc): Deal with disassembling both little and
937 big endian PowerPC systems.
938 (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle
939 disassembly, rather that assuming big endian order.
941 * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete.
942 (BIG_BREAKPOINT): Define, big endian breakpoint instruction.
943 (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction.
945 Sat Jun 3 01:54:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
947 * README: Add note about Unixware 2.x.
949 * dbxread.c (process_one_symbol): Check for exact symbol name
950 match when fixing up N_GSYM and N_STSYM symbols from Sun acc.
952 * valprint.c (value_print_array_elements): Use
953 fprintf_filtered to put out `<repeats %u times>',
954 from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab).
956 * value.h (struct value): Change `repetitions' field from
957 `short' to `int' type.
960 Fri Jun 2 11:17:23 1995 Doug Evans <dje@canuck.cygnus.com>
962 * arc-tdep.c (arc_bfd_mach_type): New static global.
963 (codestream_fill): Handle byte order differences.
964 (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
965 (arc_get_frame_setup): Read it here.
966 (arc_frame_saved_pc): And here.
967 (arc_print_insn): New function.
968 (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
969 (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
972 Wed May 31 12:04:01 1995 J.T. Conklin <jtc@rtl.cygnus.com>
974 * nlm/{configure.in, Makefile.in}: Converted to use autoconf.
975 * nlm/configure: New file, generated with autoconf 2.3.
977 * nlm/configure.in: Use sed instead of awk to get the value of
978 cpufile. Awk is not a utility required by the GNU coding
979 standards. This change also fixes the rigid whitespace
980 requirements that were required for awk.
982 * sparclite/aload.c: Use a file descriptor instead of a stdio
983 stream for i/o with target board.
984 Use #error if HAVE_TERMIOS is not defined.
986 * sparclite/{Makefile.in, configure.in}: Converted to use
988 * sparclite/configure: New file, generated with autoconf 2.3.
990 Sun May 28 23:10:07 1995 Jeff Law (law@snake.cs.utah.edu)
992 * defs.h: Include either varargs.h or stdarg.h (for va_list).
993 Fix stupid thinko in last change ("..." -> "va_list").
995 * defs.h (vprintf_filtered declaration): Add PARAMS prototype;
996 gcc-2.5 chokes on format attributes for unprototyped functions.
997 (vfprintf_filtered declaration): Likewise.
998 (vprintf_unfiltered declaration): Likewise.
999 (vfprintf_unfiltered). Likewise.
1001 Sat May 27 23:54:17 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1003 * configure.in: Use sed instead of awk to get the values of
1004 hostfile, targetfile and nativefile. Awk is not a utility
1005 required by the GNU coding standards. This change also
1006 fixes the rigid whitespace requirements that were required
1008 * configure: regenerated.
1010 Sat May 27 16:24:04 1995 Angela Marie Thomas <angela@cirdan.cygnus.com>
1012 * sparclite/{Makefile,configure}.in: Add hooks for building with
1013 -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS.
1015 Thu May 25 12:46:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1017 * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
1018 comment regarding signal numbering.
1020 Wed May 24 15:49:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
1022 * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
1025 * arm-tdep.c (convert_from_extended, convert_to_extended):
1027 * coffread.c (enter_linenos): Return if linetab 0.
1028 * config/arm/arm.mt (TDEPFILES): Add simulator support.
1029 * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
1031 Mon May 22 19:37:21 1995 Rob Savoye <rob@darkstar.cygnus.com>
1033 * config/idt.mt: replace monitor and array-rom with the new
1036 Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com)
1038 * remote-nindy.c: Install Kung patch for PR 6820. I have no idea
1041 * breakpoint.c: Move defaults of watchpoint related macros into
1043 * target.h: Macros from breakpoint.c. Conditionalize based on
1044 TARGET_HAS_HARDWARE_WATCHPOINTS.
1045 * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
1046 instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
1048 * config/i386/nm-linux.h, config/mips/nm-irix4.h,
1049 config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
1050 TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
1052 Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1054 * breakpoint.c, target.h: Move defaults of watchpoint related
1055 macros back to breakpoint.c. Required to get GDB compiling
1058 Fri May 19 14:49:37 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1060 * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
1061 attribute when compiled by gcc.
1062 * defs.h, language.h, monitor.h: Changed many function
1063 declarations to use ATTR_FORMAT.
1065 * breakpoint.c (delete_command); source.c (directory_command);
1066 top.c (define_command): Changed call to query() that had too
1068 * printcmd.c (address_info): Changed call to printf_filtered()
1069 that had too many arguments.
1071 Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1073 * infrun.c (wait_for_inferior): Move assignments to stop_signal
1074 and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
1075 were--after the switch statement on w.kind. You can't read the
1076 registers of an inferior which has exited. Use a goto in the
1077 STOPPED_BY_WATCHPOINT code.
1078 * infrun.c (wait_for_inferior): Reinstate
1079 HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
1081 Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1083 * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
1084 remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
1085 stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
1086 must match the definition of PARAMS.
1087 start-sanitize-gdbtk
1088 * gdbtk.c: Likewise.
1091 Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1093 * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
1094 printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
1095 error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
1096 with an ANSI compiler.
1097 * complaints.c (complain): Likewise.
1098 * language.c (type_error, range_error): Likewise.
1099 * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
1100 * remote-array.c (printf_monitor, debuglogs): Likewise.
1101 * remote-mips.c (mips_error): Likewise.
1102 * remote-os9k.c (printf_monitor): Likewise.
1103 * remote-st.c (printf_stdebug): Likewise.
1104 start-sanitize-gdbtk
1105 * gdbtk.c (gdbtk_query): Likewise.
1108 * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
1109 match above changes.
1111 * printcmd.c: Remove uneeded #include <varargs.h>.
1112 * remote-e7000.c: Likewise.
1114 * f-typeprint.c (f_type_print_base): Fix typo found by above
1117 Wed May 17 11:21:32 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1119 * Makefile.in (xcoffread.o): Depend on partial-stab.h.
1121 * xcoffsolib.c (sharedlibrary_command): New command.
1122 * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
1123 * xcoffsolib.c: Miscellaneous cleanups.
1125 * partial-stab.h: Ignore symbol descriptor '-' (for local
1126 variables with negative type numbers) without complaint.
1128 * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
1129 local emulation thereof. Remove unused variable ostart.
1131 Wed May 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1133 * Makefile.in (config.status): changed target so that
1134 config.status --recheck is executed if configure script changes.
1136 * monitor.c (monitor_printf): Changed format specification in
1137 error message to work with pre-ansi compilers.
1138 (monitor_load_srec): reduced length of s-records from 128 to 32
1139 bytes so download is more reliable with the rom68k monitor.
1141 * rom68k-rom.c: Added trailing space to prompt string.
1143 * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
1144 * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
1146 * defs.h, config/{xm-lynx.h, xm-nbsd.h},
1147 config/i386/{xm-i386bsd.h, xm-linux.h},
1148 config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
1149 config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
1150 (PSIGNAL_IN_SIGNAL_H): Removed.
1152 Tue May 16 13:16:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1154 * Makefile.in (Makefile): Added config.status to dependency list.
1156 * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
1157 gdb_host_cpu, gdb_target_cpu and nativefile.
1158 * configure: regenerated.
1160 Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1162 * mdebugread.c (parse_symbol): Do not relocate stBlock/scText
1163 symbols, their value is the displacement from the procedure address.
1164 * top.c (init_main): Add missing newlines to help strings for
1165 `if' and `while' commands, fix help string for `show commands'.
1167 Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com)
1169 * breakpoint.c: Move defaults of watchpoint related macros into
1170 target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
1172 * infrun.c (wait_for_inferior): Enhance comment near
1173 STOPPED_BY_WATCHPOINT.
1174 * target.h: Macros from breakpoint.c.
1176 Mon May 15 17:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1178 * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
1179 config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
1180 mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
1182 * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
1184 * Makefile.in, configure.in: Converted to use autoconf
1185 * aclocal.m4: New file, local autoconf macro definitions.
1186 * configure: New file, generated with autoconf 2.3.
1188 Mon May 15 14:46:41 1995 Stan Shebs <shebs@andros.cygnus.com>
1190 * remote.c (remote_kill): Add prototype.
1191 * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
1192 * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
1194 Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com)
1196 * sparclite/salib.c (win_ovf win_unf): Make window size constant
1197 into a variable (__WINSIZE) so that it can be controlled via the
1199 * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
1202 * infrun.c: Add #ifdef HP_OS_BUG to all references to
1203 trap_expected_after_continue.
1204 * (wait_for_inferior): Fix for remote watchpoints. Don't try to
1205 insert breakpoints while target is running (this only works on
1206 *some* native targets). This may also speed up native watchpoints
1209 Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1211 * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
1212 mdebugread.c (struct symloc), hpread.c (struct symloc),
1213 xcoffread.c (struct symloc): Fix inaccurate comment introduced
1216 Sat May 13 13:34:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1218 * rs6000-tdep.c (find_toc_address): Revise comment.
1219 * symfile.c, symfile.h (init_psymbol_list): New function;
1220 consolidate duplicated copies from os9kread.c, dbxread.c
1222 * defs.h: Declare info_verbose.
1223 * xcoffread.c: Extensive changes to support psymtabs.
1225 Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com)
1227 * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element.
1229 Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1231 * partial-stab.h: Expand comments.
1233 Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu)
1235 * Support debugging using native MACH primitives on hppa*-*-osf*.
1236 * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
1237 * config/pa/hppaosf.mh: New file.
1238 * config/pa/nm-hppao.h: Likewise.
1239 * hppam3-nat.c: Likewise.
1240 * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
1241 (MACHINE_CPROC_*_OFFSET): Define.
1243 (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
1245 Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com)
1247 * hppa-tdep.c (read_unwind_info): Cosmetic cleanup.
1248 * (unwind_command): Clean it up and make it print things out
1250 * monitor.c: Add ^C handling capability (mostly ripped off from
1252 * (monitor_printf): Make it check the command echo.
1253 * (monitor_printf_noecho): Similar to above, but doesn't check
1255 * (monitor_stop): No longer waits for prompt. That is the job of
1256 the caller. This makes things work much better for monitor_wait,
1257 which waits for the prompt itself.
1258 * (monitor_open): Deal with new monitor_stop semantics. Also,
1259 flush input after sending init strings to get rid of junk that may
1260 be output. Also, don't always send \r to remote. Use
1261 monitor_ops->line_term cuz proper character isn't always \r.
1262 * (monitor_fetch_register): Switch to completely different
1263 algorithm to deal with lame-ass monitors which put spaces in the
1264 middle of numbers, and prompt with a space!!!!!
1265 * (monitor_read_memory_single): New routine to be used with
1266 monitors that can only return one byte/short/long at a time. This
1267 is selected via MO_GETMEM_READ_SINGLE.
1268 * (monitor_load_srec): Use monitor_printf_noecho for sending S
1269 records. Most targets don't echo them.
1270 * (monitor.h): Get rid of cmd_delim. Add line_delim.
1271 * op50n-rom.c (op50n_cmds): Fill it up. Make it work.
1272 * w89k-rom.c: Change all eols from \r to \n. Change load_resp to
1273 ^Q to prevent error message.
1274 * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
1275 instruction sequence at end to make restore_pc_queue happy.
1277 Wed May 10 15:59:00 1995 Torbjorn Granlund <tege@adder.cygnus.com>
1279 * remote-est.c (est_open): Make static to match prototype.
1281 Tue May 9 16:58:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1283 * configure.in: Add little endian PowerPC support.
1284 * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
1286 * config/powerpc/tm-ppcle-eabi.h: ditto.
1288 Mon May 8 12:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1290 * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
1291 These variables not used.
1293 * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
1295 Wed May 3 17:54:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1297 * monitor.c (monitor_command): Don't use PROMPT until monitor
1298 target is known to be open.
1299 (monitor_make_srec): Don't define size of hextab.
1301 Tue May 2 18:32:24 1995 Stan Shebs <shebs@andros.cygnus.com>
1303 * configure.in (--enable-netrom): New configuration option.
1304 * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
1305 value of NETROM_OBS.
1306 (NETROM_OBS): New variable.
1307 * remote-nrom.c: New file, NetROM target support.
1308 * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
1309 REMOTE_OBS instead of REMOTE_O.
1311 * config/arc/arc.mt: Ditto.
1314 Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com)
1316 * array-rom.c (_initialize_array array_open): Move baud_rate
1317 initialization from _initxxx to array_open to fix bug with
1318 overriding -b command line option.
1320 Thu Apr 27 20:29:34 1995 Doug Evans <dje@canuck.cygnus.com>
1322 * Makefile.in (RUNTEST): Fix reference of `srcdir'.
1324 Wed Apr 26 19:01:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1326 * remote-hms.c: Rewrite to use new monitor conventions.
1328 Tue Apr 25 11:27:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1330 * dbxread.c: Add comment explaining lowest_text_address.
1331 Add comment regarding stringtab_global and psymtabs.
1333 Sat Apr 22 01:26:29 1995 Jeff Law (law@snake.cs.utah.edu)
1335 * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
1337 * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
1338 handle "short", "int" and small structures returned in registers.
1340 Fri Apr 21 12:57:53 1995 Kung Hsu <kung@mexican.cygnus.com>
1342 * minsyms.c: add new function lookup_minimal_symbol_text, to look
1343 for text symbol only.
1344 * breakpoint.c (create_longjmp_breakpoint): call
1345 lookup_minimal_symbol_text instead of lookup_minimal_symbol.
1346 * symtab.h: add lookup_minimal_symbol_text prototype.
1348 Fri Apr 21 12:03:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1350 * sh-tdep.c (sh-opc.h): Don't include.
1351 (gdbcore.h): Include.
1352 (frame_find_saved_regs): Remove unused local.
1354 Thu Apr 20 10:12:21 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1356 * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
1357 mdebugread.c (struct symloc), hpread.c (struct symloc): Clean
1360 Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com)
1362 * hppa-tdep.c (deposit_17): New routine to deposit 17 bit
1363 constants into PA instructions.
1364 * Put #ifdefs around all signal handling code. Not generally
1365 needed for embedded boards.
1366 * (hppa_fix_call_dummy): Parameterize offsets into call dummy to
1367 allow different dummys to be used by this code. Use
1368 INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
1369 Conditionalize setup of _sr4export fixup. Improve comments.
1370 * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
1371 call dummy if PA_LEVEL_0 is defined. Better comments for call
1372 dummys. Define offsets for LDIL/LDO instructions which load
1374 * config/pa/tm-pro.h: Get rid of signal handling stuff. Define
1375 PA_LEVEL_0 to disable mucking with space regs and such.
1377 Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com)
1379 * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c
1380 w89k-rom.c: Remove loadtypes, loadprotos and baudrates.
1381 * op50-rom.c: Fix copyrights and add load routine to op50n_cmds.
1382 * rom68k-rom.c (_initialize_rom68k): Don't set baud rate.
1383 * w89k-rom.c: Fix copyrights.
1385 Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com)
1387 * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove
1388 unnecessary remoteloadprotocol and remoteloadtype support.
1389 * (expect expect_prompt): Change names to monitor_expect and
1390 monitor_expect_prompt. Make them global.
1391 * (printf_monitor): Change name to monitor_printf. Make global.
1392 * (monitor_read_memory): Flush command echo to avoid parsing
1393 ambiguity with CPU32Bug monitor.
1394 * (monitor_load): Remove remoteloadprotocol and remoteloadtype
1395 support. Call target_ops->load_routine, default to
1397 * (monitor_load_srec): Remove everything but S-record support.
1398 * monitor.h (monitor_ops): Add load_routine to provide monitor
1399 specific download capability.
1400 * remote-est.c: Clean up copyrights and comments.
1401 * w89k-rom.c: Use new xmodem support.
1402 * xmodem.c xmodem.h: New files to support xmodem downloads.
1403 * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
1404 entry to monitor_ops.
1405 * cpu32bug-rom.c: New file to support Moto BCC debuggers.
1406 * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
1407 * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
1409 Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1411 * rem-multi.shar: Removed; superceded by gdbserver.
1413 Fri Apr 14 12:10:24 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1415 * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
1418 * breakpoint.c (fixup_breakpoints): Removed.
1419 * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
1420 (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
1422 * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
1423 sections, not just SECT_OFF_MAX-1.
1425 * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
1426 to be indexed by SECT_OFF_* instead of xcoff section numbers.
1427 * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
1428 * symtab.h: Revise comment about block_line_section.
1429 * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
1431 Sat Apr 15 14:15:14 1995 Stan Shebs <shebs@andros.cygnus.com>
1433 * mpw-make.in (init.c): Don't try to do symbolic {o} in sed
1434 command, not allowed by some version of MPW Make.
1435 * ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
1437 Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1439 * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
1440 VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
1441 TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
1443 Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
1445 * alpha-tdep.c (alpha_push_arguments): Only cast to long for
1448 start-sanitize-gdbtk
1449 Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com>
1451 * gdbtk.c (gdb_disassemble): Read from inferior if connected
1452 to a VxWorks target.
1454 Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com)
1456 * README.GDBTK: New file. Contains the obvious.
1459 Thu Apr 13 16:17:04 1995 Rob Savoye <rob@darkstar.cygnus.com>
1461 * remote-array.c: New file for Array Tech LSI33k based controller
1464 Thu Apr 13 12:23:31 1995 Kung Hsu <kung@rtl.cygnus.com>
1466 * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
1468 * remote-vxsparc.c: New file, preliminary check in, this configuration
1470 * remote-vxmips.c: ditto.
1472 Thu Apr 13 12:10:14 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1474 * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
1475 to declare the function.
1477 Wed Apr 12 16:40:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1479 * monitor.h (init_monitor_ops): Declare.
1480 * rom68k-rom.c: Clarify some comments.
1481 (rom68k_open): Define as static, to match decl.
1483 Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1485 * gdb.gdb: New file.
1486 * .gdbinit: Move list-objfiles to gdb.gdb.
1488 * values.c (set_internalvar): Set modifiable flag of newval.
1490 Wed Apr 12 14:34:31 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1492 * xcoffread.c: Call complain() rather than error() or printing a
1496 Wed Apr 12 08:15:27 1995 Doug Evans <dje@canuck.cygnus.com>
1498 * arc-tdep.c: #include "gdbcmd.h".
1499 (codestream_seek): Pass CORE_ADDR.
1500 (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
1501 (debug_pipeline_p): Likewise.
1502 (X_...): Instruction field access macros.
1503 (BUILD_INSN): Define.
1504 (codestream_tell): Allow for stream elements > 1 byte.
1505 (codestream_fill): Likewise.
1506 (setup_prologue_scan): New function.
1507 (arc_get_frame_setup): Call it. Update to current spec
1508 regarding prologues. Use BUILD_INSN.
1509 (skip_prologue): New argument `frameless_p'. Use BUILD_INSN.
1510 (arc_frame_saved_pc): New function.
1511 (frame_find_saved_regs): Use BUILD_INSN.
1512 (get_insn_type, single_step): New functions.
1513 (one_stepped): New global.
1514 (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
1515 (arc_set_cpu_type): New function.
1516 (_initialize_arc_tdep): Define new `set' commands `cpu',
1517 `displaypipeline', and `debugpipeline'.
1518 * remote-arc.c (break_insn): Add bi-endian support.
1519 (arc_insert_breakpoint): Likewise.
1520 (arc_remove_breakpoint): Likewise.
1521 (switch_command): Delete.
1522 * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
1523 (TARGET_BYTE_ORDER_SELECTABLE): Define.
1524 (DEFAULT_ARC_CPU_TYPE): Define.
1525 (SKIP_PROLOGUE_FRAMELESS_P): Define.
1526 (BREAKPOINT): Delete.
1527 (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
1528 (DECR_PC_AFTER_BREAK): Change to 8.
1529 (NO_SINGLE_STEP): Define.
1530 (ARC_PC_TO_REAL_ADDRESS): Define.
1531 (SAVED_PC_AFTER_CALL): Use it.
1532 (NUM_REGS, REGISTER_BYTES): Fix.
1533 (FRAME_SAVED_PC): Call arc_frame_saved_pc.
1534 (FRAME_LOCALS_ADDRESS): Fix.
1537 Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1539 * top.c, utils.c, defs.h: Remove error_hook. It is currently
1540 unused and would need to hook into error_begin()/return_to_top_level(),
1541 instead of error(), if it were to be used.
1543 Tue Apr 11 13:46:25 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1545 * utils.c, defs.h (warning_begin): Renamed from warning_setup, for
1546 consistency with error_begin. Also print warning_pre_print.
1548 * utils.c (warning): Use it.
1549 * utils.c (error_begin): Doc fix.
1550 * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
1551 symfile_objfile, nuke it.
1553 Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1555 * printcmd.c (print_address_numeric): Pass use_local to
1556 print_longest, rather than always passing 1.
1558 * nlm/Makefile.in: Remove comments discussing munch.
1560 start-sanitize-gdbtk
1561 Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1563 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
1564 F_SETOWN is, use that.
1567 Mon Apr 10 18:31:57 1995 Stan Shebs <shebs@andros.cygnus.com>
1569 Merge in support for Mac MPW as a host.
1570 (Old change descriptions retained for informational value.)
1572 * mpw-config.in (i386-unknown-go32): Change from aout.
1573 (sh-hitachi-hms): New target.
1574 * mpw-make.in (BISON): Use byacc instead of bison.
1575 (VERSION): Bump to 4.14.1.
1576 (*-pinsn.*): Remove mentions everywhere.
1577 (all): Don't build MacGDB.
1578 (gdb, SiowGDB): Depend on Version.r.
1579 (Version.r): Generate from version info.
1580 * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
1581 (main) [MPW]: Remove debugging hook.
1582 * mac-xdep.c (debug_openp): New flag.
1583 (mac_init): Set flag if env variable defined.
1584 * ser-mac.c (mac_open): Clarify error message.
1585 (mac_readchar): Call PROGRESS while looping.
1586 (mac_write): Call sleep instead of sec_sleep.
1587 (sec_sleep): Remove.
1588 * source.c (openp) [MPW]: Only print debugging info if debugging.
1589 * utils.c (query) [MPW]: Clarify that behavior is a bug.
1591 * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
1593 * main.c, source.c: Remove hacks that replace long strings
1594 with shorter ones, now solved portably.
1596 * config/m68k/xm-mpw.h (spin.h): Include.
1597 (ALMOST_STDC): Only define if MPW_C.
1598 * config/m68k/tm-mac.h: New file, Mac target definitions.
1600 * mpw-config.in (m68k-apple-macos, ppc-apple-macos,
1601 i386-unknown-aout): New targets.
1602 (mk.tmp): Add *DEPFILES definitions.
1603 * mpw-make.in: Remove gC rules, clean up definitions for other
1604 include files, bump version, fix bogus \ that should be \Option-d.
1605 (init.c): Build correctly.
1607 * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
1608 (ALLDEPFILES): Add somsolib.c.
1609 (somsolib.o): Add some dependencies.
1611 * mpw-config.in: Use nm-empty.h if host is not target.
1612 (xdepfiles): Add mac-xdep.c.o.
1614 * mpw-make.in: Add Fortran files.
1615 (XDEPFILES): Remove.
1617 * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
1618 * ser-mac.c (MacSerial.h): Include instead of Serial.h.
1620 * mpw-make.in: Use {s} instead of {srcdir} everywhere.
1621 (bindir, libdir): Remove extra colon.
1622 (source.c): Compile with C instead of gC.
1623 (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
1624 (install-only): Don't install MacGDB.
1625 * source.c (openp) [MPW]: Add a debugging display.
1626 (open_source_file) [MPW]: Use MPW basename finders.
1627 [MPW_C]: Briefer versions of help for line and list commands.
1629 * mpw-make.in: Change references from paread.c to somread.c
1631 * mpw-make.in (VERSION): Update to 4.12.3.
1632 (SiowGDB): New target, GDB using SIOW library.
1633 (init-new.c): New target, attempt to generate init.c from sources.
1634 (main.c.o, top.c.o): Put each in its own segment.
1635 * main.c (main) [MPW]: Always call mac_init.
1636 * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
1637 an extra newline otherwise.
1638 * mac-xdep.c: More comments in various places, remove junk.
1639 (mac_init): Add tests for MPW and SIOW.
1640 (use_wne, has_color_qd): Renamed.
1641 (use_color_qd): New variable.
1642 (grow_window): Only do console resizing to console window,
1643 call resize_console_window.
1644 (zoom_window): Call resize_console_window.
1645 (resize_console_window, scroll_text): New functions.
1646 (adjust_console_sizes): Always align viewrect to even multiples of
1648 (adjust_console_text): Always scroll by whole lines.
1649 (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
1650 recalculation of scroll positions if a newline was output.
1651 (hacked_fflush): Similarly, for flushing.
1652 (hacked_fgetc): New function, aborts if called in MacGDB.
1653 * ser-mac.c (mac_readchar): Rename starttime to start_time,
1654 remove debugging printf.
1655 (mac_write): Sleep on first 4 writes.
1656 (sec_sleep): New function, works like standard sleep.
1657 * macgdb.r: Adjust positioning and contents of About box.
1658 Set minimum size to 2000K, preferred size to 5000K.
1659 * config/m68k/xm-mpw.h (fgetc): Define as a macro.
1661 * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
1662 (top.c.o, annotate.c.o): Add build rules.
1663 * macgdb.r (SysTypes.r): Include.
1664 ('vers'): New resource, version info.
1665 (mFile, mEdit, mDebug): Enable all menu items.
1666 (mDebug): Add key equivalents for continue, step, next.
1667 (wConsole): Add zoom and close boxes to window.
1668 * mac-xdep.c (new_console_window): New function, code taken from
1670 (mac_command_loop): Use GetCaretTime for wait interval, call
1671 do_idle on null events.
1672 (do_idle): New function.
1673 (zoom_window): Implement zooming.
1674 (v_scroll_proc): New function, handles vertical scrolling.
1675 (activate_window): Do activation of console window.
1676 (do_menu_command): Implement items of file, edit, and debug menus.
1677 (do_keyboard_command): Fix command extraction.
1678 (adjust_console_sizes, adjust_console_text): New functions.
1679 (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
1680 hacked_putc): Don't call draw_console.
1681 * ser-mac.c (mac_open): Add an error message for invalid ports.
1682 (first_mac_write): New global.
1683 (mac_write): Use first_mac_write to sleep on first several writes.
1685 * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
1686 (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
1687 (TSOBS): Don't compile inflow.c.
1688 (all, install): Add MacGDB.
1689 * main.c (main): Do Mac-specific init and command loop if a
1690 standalone app, skip full option help message if compiling
1692 (gdb_readline): If MPW, add a newline after the (gdb) prompt.
1693 * utils.c (_initialize_utils): If MPW, don't try to use termcap to
1694 compute the window size.
1695 * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
1696 fflush): Define as macros that expand into hacked_... versions.
1697 (StandAlone, mac_app): Declare.
1698 * macgdb.r (SIZE): Set the default partition to 4000K.
1699 * mac-xdep.c (readline.h, history.h): Include.
1700 (terminal.h): Don't include.
1702 (gdb_has_a_terminal): Define Mac-specific version.
1703 (do_keyboard_command): Simplify search for command string.
1704 (readline): Define as gdb_readline.
1705 Add other history/readline stubs to make main gdb link.
1706 (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
1707 hacked_fputc, hacked_fflush): New functions, intercept output to
1708 stdout and stderr, send to console window.
1710 * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
1711 (XDEPFILES): Define.
1712 (main.c.o): Compile with gC instead of C.
1713 * mac-defs.h: New file, menu etc definitions shared between
1715 * macgdb.r: New file, Rez (resource compiler) resource
1717 * mac-xdep.c: New file, Mac host interface code.
1718 * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
1720 (PATHNAME_SEPARATOR_STRING): Remove.
1721 (SIGQUIT, SIGHUP): Define.
1722 (fileno, R_OK): Define.
1724 * mpw-config.in: New file, MPW configuration fragment.
1725 * mpw-make.in: New file, MPW makefile fragment.
1726 * config/m68k/xm-mpw.h: New file, MPW host definitions.
1727 * ser-mac.c: New file, Mac serial interface.
1729 Mon Apr 10 16:47:57 1995 Kung Hsu <kung@mexican.cygnus.com>
1731 * valprint.c (print_longest): Fix a syntax error in #ifdef
1732 PRINTF_HAS_LONG_LONG.
1734 * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and
1735 PRINTF_HAS_LONG_LONG.
1736 * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
1738 Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1740 * mdebugread.c (parse_symbol): Use new variable
1741 nodebug_var_symbol_type as type of variables which don't have any
1742 ecoff debug info associated with them.
1743 (parse_symbol, parse_procedure): Use heuristics to determine if
1744 functions were compiled without debugging info and change their
1745 type to nodebug_function_symbol_type.
1746 (_initialize_mdebugread): Initialize nodebug_*_symbol_type.
1748 * source.c (line_info): Clear sal.pc for `info line' without
1751 Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com)
1753 * monitor.c: make_xmodem_packet and print_xmodem_packet go away.
1754 send_xmodem_packet shows up to do the obvious. Lots of fixes to
1755 xmodem downloads including resetting of block number at start of
1756 new transfers, fix for buffer overrun problem, addition of CRC
1758 * (monitor_open): loadtype_str and loadproto_str now default to
1759 first entry in monitor_ops->loadtypes.
1760 * (monitor_wait): Lengthen register dump buf, because of verbose
1762 * (monitor_fetch_register): Report unimplemented registers as 0.
1763 * (monitor_read_memory): Only do 16 byte aligned transfers
1764 because of formatting weirdness with the Winbond monitor. Also,
1765 ignore non-hex, non-whitespace formatting between bytes (same
1767 * (monitor_load): Clean up logic.
1768 * (monitor_load_srec): Re-do xmodem support. Move lots of it
1769 into send_xmodem_packet.
1770 * (getacknak): Get rid of polls and timeouts. Handle CRC
1771 requests from receiver.
1772 * (monitor_make_srec): Efficiency improvements. Don't call
1773 sprintf to output two digit hex numbers.
1774 * (crcinit, docrc): New, CRC-16 support routines.
1775 * (send_xmodem_packet): New routine to generate either CRC-16 or
1776 checksummed xmodem packets.
1778 * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
1779 Reduce tables down to only the load types supported by each
1782 * w89k-rom.c (w89k_supply_register): Parses output of Winbond
1784 * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
1785 * (w89k_cmds): Add clear all breakpoints, memory fill, and dump
1788 * config/pa/tm-hppa.h: Define lots register offsets needed by
1792 Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1794 * Makefile.in (X11_INCLUDES): Define as empty.
1795 (X11_CFLAGS): Define as including $(X11_INCLUDES).
1796 (X11_LIB_SWITCHES): Define as empty.
1797 (X11_LIBS): Define as -lX11.
1799 start-sanitize-gdbtk
1800 * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
1801 and --x-libraries switches, setting the X11_INCLUDES and
1802 X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11
1803 in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
1805 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
1806 it. This means that the stop button doesn't work, but is better
1810 Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1812 * mips-tdep.c (mips_print_register): Remove unused variable
1813 our_type and call to init_type. Fixes memory leak. Reindent function.
1815 * mips-tdep.c (mips_print_register), findvar.c
1816 (write_register_bytes): Make buffer char[] instead of unsigned
1819 Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1821 * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
1822 variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
1823 (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint
1824 print sym") could output extraneous stuff.
1825 * objfiles.c: Don't declare error_pre_print; defs.h does it.
1827 Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com)
1829 * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag.
1830 * monitor.c (monitor_read_memory): Use previously mentioned flag
1831 to send proper format memory examine commands to the w89k monitor.
1832 Also, try to handle bizarre format of memory dump...
1834 * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.
1836 Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1838 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
1839 Handle relocated symbol address.
1840 * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
1841 Do not relocate a zero address.
1843 Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1845 * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
1848 * stabsread.c (read_range_type): Remove FIXME comment about
1849 type-id (I presume this meant a number followed by = followed by a
1850 type) versus type number; Per fixed it.
1852 Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com)
1854 * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
1856 Wed Mar 29 18:30:03 1995 Stan Shebs <shebs@andros.cygnus.com>
1858 * remote-e7000.c (why_stop): Add new kinds of strings to expect
1860 (e7000_wait): Add interpretations for more stop reasons,
1861 including warnings for write protect and cycle address errors.
1863 Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com)
1865 start-sanitize-gdbtk
1866 * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
1867 locations (per-host) for X11 include files.
1868 * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
1869 the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
1870 of the R5 include files.
1872 * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
1873 support for interrupting target.
1874 * monitor.c (monitor_open): Send stop command before doing
1876 * (monitor_load_srec): Fix record size calculation to prevent end
1877 of segment from getting trashed.
1878 * rom68k-rom.c: Update to latest version of struct monitor_ops.
1879 * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
1880 problems. Makes DOS hosted function calling work.
1881 * sparclite/crt0.s: Define _start to make COFF happy.
1883 Wed Mar 29 09:11:51 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1885 * defs.h (atof): Don't provide an external declaration if atof is
1888 Wed Mar 29 00:01:07 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1890 * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in
1891 the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
1894 Tue Mar 28 17:04:04 1995 Per Bothner <bothner@kalessin.cygnus.com>
1896 * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB
1897 set, set TYPE_FLAG_TARGET_STUB.
1898 (check_stub_type): Recalculate TYPE_LENGTH for range type.
1899 * stabsread.c (read_range_type): If index type number is followed
1900 by '=', back up, call read_type. and assume we have a true range.
1901 * gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment.
1903 Mon Mar 27 22:51:54 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1905 * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
1906 sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible
1907 registers with zero to handle recent read_register_bytes change.
1908 * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
1909 fill_gregset): Fix handling of CAUSE_REGNUM.
1910 * mips-nat.c (store_inferior_registers): Handle unwritable
1911 registers when storing a single register.
1912 * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
1915 * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear
1916 allocated mips_extra_func_info, if the debug info is corrupt,
1917 the PDR to fill it in might be missing.
1919 Mon Mar 27 14:43:00 1995 Kung Hsu <kung@mexican.cygnus.com>
1921 * vx-share/regPacket.h: a new file interfacing with vxworks.
1923 Sun Mar 26 13:22:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1925 * breakpoint.c (bpstat_do_actions): Once we've executed the
1926 commands, set bs->commands to NULL.
1928 Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1930 * buildsym.c (patch_subfile_name): Update last_source_file
1931 with the real source file name.
1932 * dbxread.c (end_psymtab): Handle static functions in the
1933 SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
1934 to lookup_minimal_symbol.
1935 (process_one_symbol): Ignore extra outermost context from
1937 * stabsread.c (define_symbol): Do not complain for SunPRO
1938 static variable encoding if STATIC_TRANSFORM_NAME is defined.
1939 * sparc-tdep.c, config/sparc/tm-sun4sol2.h
1940 (sunpro_static_transform_name): Renamed from
1941 solaris_static_transform_name.
1942 * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
1943 Define to sunpro_static_transform_name for acc 3.0 compiled
1945 * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
1946 Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
1948 * procfs.c (info_proc_siginfo): Cast sip->si_addr to
1949 `unsigned long' and use `lx' format for printing it.
1951 Fri Mar 24 15:45:42 1995 Stu Grossman (grossman@cygnus.com)
1953 * configure.in: Move test for m68*-est-* before m68*-*-coff*.
1954 * findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
1955 the beginning of the code.
1956 * (write_register_gen): New routine. Analogous to
1958 * (write_register_bytes): Another rewrite! Make it smarter about
1959 not updating regs with the same value.
1960 * monitor.c (printf_monitor readchar): Use stderr instead of
1961 stdout to output debug info. Also cleanup readchar a little.
1962 * (expect): Make sure that excessive responses are null
1964 * (monitor_open): Check for magic number in monitor_ops struct.
1965 Allow multiple commands as init strings. Also, clear all
1967 * (monitor_resume monitor_wait): Send a command to dump all the
1968 regs for those targets which don't do so when waking up after a
1970 * (monitor_wait): Handle excessive response output better.
1971 * (monitor_write_memory): Use block fill, word, and long word
1972 commands (if they exist) to write memory more efficiently.
1973 * General cleanups to use flag bits instead of individual flag
1974 words in monitor_ops struct.
1975 * (monitor_command): Return output from command.
1976 * (monitor_load_srec): Allocate buffer only once. Use alloca.
1977 Wait for load response string instead of using a timeout to start
1978 sending S-records. Fix bug where value of srec_frame shrinks. If
1979 hashmark is set, print `-' for retransmissions. General cleanups.
1980 * (monitor_make_srec): Get rid of S-record default type kludge.
1981 * monitor.h: Use seperate struct for memory and register
1982 read/write commands. Memory commands can come in byte, word,
1983 long, and longlong forms.
1984 * (monitor_ops): Change lots of fields. Generalize some stuff.
1985 Put all flags into flags word. Allow init to be a list of commands.
1986 Add command for clearing all breakpoints, block fill, dumping all
1988 * remote-est.c: Rewrite to use new monitor conventions.
1989 * config/m68k/est.mt (TDEPFILES): Add monitor.o.
1990 * config/m68k/tm-est.h: Set NUM_REGS to 18.
1991 * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
1994 Thu Mar 23 23:20:00 1995 Jeff Law (law@snake.cs.utah.edu)
1996 * somsolib.c (som_solib_add): Handle case where a shared library
1997 referenced by a core file has sections without the SEC_ALLOC bit
1998 set (eg stabs sections).
2000 Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2002 * breakpoint.c (bpstat_do_actions): For each element in the bpstat
2003 chain, do all the commands regardless of whether they run the
2006 Wed Mar 22 19:17:06 1995 Doug Evans <dje@cygnus.com>
2008 * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
2009 BREAKPOINT if mono-endian.
2010 (break_insn): Deleted.
2011 (big_break_insn, little_break_insn): Define.
2012 (memory_insert_breakpoint): Handle bi-endian cpus.
2013 (BREAKPOINT_LEN): Define.
2014 (memory_remove_breakpoint): Use it.
2015 (memory_breakpoint_size): Likewise.
2017 Tue Mar 21 17:03:17 1995 Kung Hsu <kung@mexican.cygnus.com>
2019 * sparc-stub.c: add nop after 'bg good_wim'.
2020 * sparcl-stub.c: ditto.
2022 Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2024 * infrun.c (handle_command): Don't print TARGET_SIGNAL_0,
2025 TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT.
2027 Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu)
2029 * hppab-nat.c (store_inferior_registers): Sync with HPUX version.
2031 Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com)
2033 * hppah-nat.c (store_inferior_registers): Move check for
2034 CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
2035 found by test suite during function calls, which attempts to write
2036 unwritable registers.
2038 Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2040 * mdebugread.c (parse_symbol): If finishing a function without
2041 known parameter type info, set that from parameter symbols.
2042 Remove commented-out add_param_to_type support.
2044 Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2046 * xcoffread.c (process_linenos): Make sure filename we pass to
2047 start_subfile will cause deduce_language_from_filename to return
2048 the correct thing. Reindent function to GNU standards.
2050 Thu Mar 16 15:54:00 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2052 * nlm/gdbserve.c (handle_exception): #if out call to StopBell,
2053 as it is not available on NetWare 3 or PIN.
2054 * nlm/ppc.c (StopBell): Removed.
2056 Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2058 * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter
2059 inferred from the traceback tags, give its type the name
2060 "<non-float parameter>".
2062 * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34.
2064 Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com)
2066 * findvar.c (read_register_bytes write_register_bytes): Make
2067 these routines much smarter about updating registers from the
2068 target, only doing so when absolutely necessary. This really
2069 speeds up register modification on some remote targets.
2071 * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
2072 BFD makes this unnecessary. Lots of debugging speedups.
2073 * (expect): NULL terminate return string.
2074 * (monitor_open monitor_supply_register parse_register_dump
2075 monitor_wait monitor_fetch_register): Switch to using GNU regexp
2076 library to parse multi-register displays.
2077 * (monitor_read_memory): Read multiple bytes (up to 16) at once.
2078 * (monitor_create_inferior): Call clear_proceed_status to make run
2079 command notice first breakpoint.
2080 * (monitor_load): Clean up. Reset inferior_pid, set pc to start
2081 address and reset symbol table stuff to make loads put things into
2083 * (monitor_load_srec): Lower sleep time to 1 second.
2085 * monitor.h (struct monitor_ops): Add register_pattern and
2086 supply_register to monitor_ops.
2088 * rom68k-rom.c: Add new support for handling register dumps.
2089 * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register
2092 Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2094 * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make
2095 argument be an int, not a char. Using a prototype followed by an
2096 old-style function definition in a case where an argument is
2097 widened is a GCC-ism not supported by the native AIX compiler.
2099 Wed Mar 15 12:22:35 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2101 * nlmstub.def: Removed, this was moved to nlm/gdbserve.def
2104 * configure.in (alpha-*-netware*): Removed configuration.
2105 * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed.
2106 * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h,
2107 alpha.c, alpha.h, altdebug.h}: Removed.
2109 * nlm/gdbserve.c (main): Add support for processing BOARD=
2110 argument, deprecate NODE=.
2112 Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2114 * c-exp.y (yylex): Make an empty character constant an error.
2116 Tue Mar 14 15:00:54 1995 Per Bothner <bothner@kalessin.cygnus.com>
2118 * valops.c (value_arg_coerce): Do possible value_coerce_array
2119 before determining type argument to value_cast.
2121 Tue Mar 14 10:41:41 1995 Kung Hsu <kung@mexican.cygnus.com>
2123 * remote-es.c: Replace ignore with 0.
2125 Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2127 * valops.c (value_repeat), eval.c (evaluate_subexp_standard):
2128 If VALUE_REPEATED is already set, just error out.
2130 * valops.c (value_cast, value_slice), parse.c (follow_types): Add
2131 FIXME-type-allocation comments.
2133 * gdbtypes.h (struct type): Fix comment about what units the
2136 Mon Mar 13 18:27:25 1995 Stan Shebs <shebs@andros.cygnus.com>
2138 * ch-valprint.c (annotate.h): Include.
2139 * eval.c (evaluate_subexp_standard): Remove unused variable.
2140 (calc_f77_array_dims): Add parens to expression.
2141 * f-exp.y (yylex): Add parens to expression, remove unused label.
2142 * f-lang.h (calc_f77_array_dims): Declare.
2143 * f-valprint.c (f_val_print): Remove unused variables.
2145 Mon Mar 13 15:25:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2147 * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
2148 use the PDR, just examine prologues instead.
2151 Fri Mar 10 16:13:18 1995 Kung Hsu <kung@mexican.cygnus.com>
2153 * config/tm-arc.h: Change arc register names.
2156 Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2158 Fix problems with infinite recursion when printing a class
2159 that contains a static instance of the class.
2160 * cp-valprint.c (dont_print_vb_obstack): Renamed from
2161 dont_print_obstack, made static.
2162 (dont_print_statmem_obstack): New obstack, controls printing
2163 of static member classes.
2164 (_initialize_cp_valprint): Initialize it.
2165 (cp_print_static_field): New function, handles printing of
2167 (cp_print_value_fields): New parameter dont_print_statmem to
2168 handle recursive printing of static member classes, use
2169 cp_print_static_field to handle printing of static members.
2170 * c-valprint.c (cp_print_value_fields): Update prototype and
2171 call to include additional dont_print_statmem parameter.
2172 * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
2175 * alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
2177 * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
2178 alpha_find_saved_regs if fi->saved_regs is still NULL.
2180 * elfread.c (elf_symtab_read): Ensure that the filename field
2181 of a minsym is nonempty. Ignore solib trampoline symbols from
2182 the main symbol table, they might have a bogus value.
2184 * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
2185 Fix typos in comments.
2187 Thu Mar 9 17:19:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2189 * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
2190 pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way
2191 we know whether the PDR ever got set.
2192 * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
2193 use the PDR, just examine prologues instead.
2195 Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu)
2197 * somsolib.c (som_solib_section_offsets): Get offset of text
2200 Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com)
2202 start-sanitize-gdbtk
2203 * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint
2204 type is not bp_breakpoint.
2207 * source.c (forward_search_command reverse_search_command): Set
2208 convenience variable $_ to be the line # of the match.
2209 * symtab.c (decode_line_1): Allow convenience variables to be
2210 used in line specs (for breakpoints and such).
2212 Wed Mar 8 12:51:00 1995 Stan Shebs <shebs@andros.cygnus.com>
2214 * Makefile.in (VERSION): Bump to 4.14.1.
2215 * NEWS, README: Update for 4.14.
2216 * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
2217 (i386_insert_nonaligned_watchpoint): Call aligned instead of
2218 generic watchpoint insertion.
2220 Tue Mar 7 19:26:10 1995 Per Bothner <bothner@kalessin.cygnus.com>
2222 * valops.c (value_slice): Do COERCE_VARYING_ARRAY.
2224 Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com)
2226 * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops
2228 * monitor.c (monitor_create_inferior): Allow run command to start
2231 * monitor.c (monitor_load): Set PC to start address when done
2234 * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops.
2235 Remove ref to monitor_create_inferior.
2237 * monitor.c: More general cleanups. Add prototypes, remove
2238 unused routines. Fix bug with wrong number of args to error().
2240 * main.c (main): Don't start up GUI when running under gdb mode
2243 * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make
2244 Sun make (with VPATH) work...
2246 * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP
2247 (rom68k) target work right.
2248 * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new
2249 monitor.c interface. More work needs to be done here.
2250 * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
2251 match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
2252 floating-point for this card.
2254 * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c,
2255 ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits
2256 (needed for IDP board?!?!?).
2258 * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs
2259 and usage of fputc_unfiltered and putchar_unfiltered. Eliminate
2260 putc_unfiltered (it's superfluous).
2262 * command.h, command.c, top.c: Add var_enum command type. It's
2263 like var_string but allows only only one of the specified strings.
2265 Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2267 * valops.c (value_cast): Don't use backslash newline--pre-ANSI
2268 compilers (such as SunOS4 /bin/cc) don't generally support it
2269 except in some contexts.
2271 Fri Mar 3 17:42:48 1995 Per Bothner <bothner@kalessin.cygnus.com>
2273 * valops.c (value_cast): Check for cast to array type *before*
2274 we coerce array to pointer (in case arg2 is already array).
2276 * valops.c (call_function_by_hand): Set using_gcc to 2 if using
2277 gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc.
2278 Also check REG_STRUCT_HAS_ADDR for union, array and string types.
2280 * valops.c (call_function_by_hand): Re-arrange code for pushing
2281 paramaters on the stack so we can do better STACK_ALIGN.
2283 * valops.c (call_function_by_hand): Call error if the number
2284 of arguments is fewer than parameter types in function type.
2286 Fri Mar 3 17:13:05 1995 Doug Evans <dje@canuck.cygnus.com>
2288 * sparc-tdep.c (sparc_extract_struct_value_address): Move
2289 sparc64 support to here.
2290 (sparc64_extract_struct_value_address): Deleted.
2291 (dump_ccreg): Add a prototype so long long arg -> int.
2292 * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
2293 (EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
2295 Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu)
2297 * hpread.c (hpread_record_lines): New argument "offset". All
2298 callers changed. Use it to handle dynamic address relocation.
2299 (hpread_build_psymtabs): Adjust texthigh as we read each function
2300 debug symbol. Fix computation of texthigh.
2301 (hpread_read_subrange_type): Work around macro bugs in HP's
2303 (hpread_process_one_debug_symbol): Correctly map source lines.
2305 * somread.c (check_strange_names): Filter names emitted by the HP
2306 compiler when generating PIC code.
2308 * valops.c (value_struct_elt_for_reference): Work around macro
2309 bugs in HP's compilers.
2310 * c-exp.y (block): Likewise.
2312 Fri Mar 3 12:27:28 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2314 * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to
2317 * utils.c [_AIX]: Include stddef.h instead of #defining size_t.
2319 Fri Mar 3 12:33:24 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2321 * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved
2322 registers that GCC emits on the PowerPC by default in addition to
2323 the store multiple instruction used on the Power series.
2325 Fri Mar 3 00:54:58 1995 Doug Evans <dje@canuck.cygnus.com>
2327 * sparc-tdep.c (decode_asi): New function.
2328 (sparc_print_register_hook): Pretty print more v9 registers.
2329 * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos.
2331 Thu Mar 2 22:20:22 1995 Doug Evans <dje@canuck.cygnus.com>
2333 * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc.
2334 (target_to_host): Change result type to CORE_ADDR.
2336 Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2338 * rs6000-tdep.c: Fix byte-swapping sins.
2340 Thu Mar 2 16:48:45 1995 Michael Meissner <meissner@cygnus.com>
2342 * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share
2343 code between branch unconditional and branch conditional cases.
2345 Wed Mar 1 09:41:26 1995 Doug Evans <dje@canuck.cygnus.com>
2347 Various changes for sparc64.
2348 * sparc-tdep.c (NUM_SPARC_FPREGS): Define.
2349 (SPARC_INTREG_SIZE): Define.
2350 (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg)
2352 (enum branch_type): New value `done_retry'.
2353 (isbranch): Renamed from isannulled. All callers changed.
2354 Support new sparc64 branch insns.
2355 (single_step): Handle done_retry.
2356 (sparc_extract_struct_value_address): Don't assume 4 byte regs.
2357 (get_saved_register): Likewise.
2358 (sparc_push_dummy_frame): Likewise.
2359 (sparc_frame_find_saved_regs): Likewise.
2360 (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM,
2361 or PS_REGNUM if not sparc64. sparc64 has 64 fp regs.
2362 (sparc64_extract_struct_value_address): New function.
2363 (dump_ccreg, sparc_print_register_hook): Likewise.
2364 * sp64-tdep.c: Deleted.
2365 * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define.
2366 (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg.
2367 (CC_HAS_LONG_LONG): Define.
2368 (REGISTER_NAMES): Delete cle/tle and reorganize.
2369 (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of
2371 (REGISTER_BYTES): Update.
2372 (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete.
2373 (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h.
2374 (NO_SINGLE_STEP): Likewise.
2375 * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs.
2376 * sparc/sp64.mt: Move simulator support ...
2377 * sparc/sp64sim.mt: ... to here.
2379 Wed Mar 1 13:14:42 1995 Kung Hsu <kung@mexican.cygnus.com>
2381 * remote-vx960.c: new file for target specific register packaging.
2382 * remote-vx68.c: ditto.
2383 * config/i960/vxworks960.mt: add remote-vx960.o.
2384 * config/m68k/vxworks68.mt: add remote-vx68.o.
2386 Wed Mar 1 13:42:49 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2388 * remote.c (remote_wait): Make calls to strtol be type correct by
2389 passing the address of a char * pointer instead of an unsigned
2392 * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling
2393 write_memory to make things type correct.
2395 Wed Mar 1 12:17:31 1995 Michael Meissner <meissner@cygnus.com>
2397 * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the
2398 standard Linux yacc by adding more names to be redefined with a
2401 Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2403 * hppa-tdep.c (pa_print_registers), monitor.c: Use
2404 extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
2405 * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
2406 Rename it to SWAP_FLOATING to make it clear it is no longer for
2409 Tue Feb 28 14:38:39 1995 Kung Hsu <kung@mexican.cygnus.com>
2411 * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
2415 * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to
2417 * remote-arc.c (arc_wait): when a processor stops, stop other two
2419 * remote-arc.c (switch_command): switch tm_print_insn.
2422 * vx-share/ptrace.h: merge in WRS new ptrace requests.
2424 * defs.h: fix a syntax error.
2426 * a29k-tdep.c (get_longjmp_target): add this function, from WRS.
2427 * remote-vx.c: move read_register and write_register out to
2428 target specific files.
2429 * remote-vx29k.c (get_fp_contnets): add this function, from WRS.
2431 * defs.h: define SWAP_TARGET_AND_HOST macro.
2432 * findvar.c, monitor.c, hppa-tdep.c: remove definition of
2433 SWAP_TARGET_AND_HOST.
2435 Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2437 * alpha-tdep.c (find_proc_desc): Only attempt to set
2438 PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL.
2440 Mon Feb 27 11:56:32 1995 Stan Shebs <shebs@andros.cygnus.com>
2442 * monitor.c: General gcc -Wall lint cleanup and reformat.
2443 (monitor_command): If no args, send an empty command.
2445 Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com)
2447 * monitor.c (monitor_load_ascii_srec): Add a one second sleep
2448 after send LOAD_CMD to prevent loss of first S-record.
2450 Tue Feb 21 20:48:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
2452 * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2.
2453 Call error if too few arguments.
2454 If REG_STRUCT_HAS_ADDR (structs passed by invisible reference),
2455 copy and convert to reference *before* we calculate alignment.
2456 Also, make sure structs allocated for return values and invisible
2457 reference don't violate STACK_ALIGN.
2459 Tue Feb 21 23:29:59 1995 Per Bothner <bothner@rtl.cygnus.com>
2461 * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)'
2462 (same as C's '(TYPE[])EXPR')
2464 Tue Feb 21 11:47:26 1995 Stan Shebs <shebs@andros.cygnus.com>
2466 * top.c (print_gdb_version): Update the year.
2468 Sun Feb 19 14:31:57 1995 Jim Kingdon <kingdon@rtl.cygnus.com>
2470 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in
2471 `..' not in `../..'.
2473 Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2475 * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL
2476 in addition to a PIOCSSIG to kill the inferior.
2478 Thu Feb 16 15:06:12 1995 Per Bothner <bothner@kalessin.cygnus.com>
2480 * parse.c (follow_types): Given (TYPE[]) (i.e. with no length),
2481 create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
2482 * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array
2483 of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
2484 * c-typeprint.c (c_type_print_varspec_suffix): If array length
2485 is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
2487 Thu Feb 16 16:06:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2489 * dcache.c (insque, remque): Rewrite Linux support.
2491 Wed Feb 15 12:33:20 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2493 * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1.
2495 * dcache.c (insque, remque): If compiling in standard C on Linux,
2496 protect insque and remque with macros to cast the pointer
2497 arguments to the proper type.
2499 Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com)
2501 * annotate.c, breakpoint.c, defs.h, top.c: Replace
2502 enable/disable_breakpoint_hook with modify_breakpoint_hook.
2503 start-sanitize-gdbtk
2505 * gdbtk.c: General cleanups, get rid of unused variables. Redo
2506 handling of stdout/stderr to just return output as the result of
2507 the tcl command that caused the output. Cleanup -Wall stuff.
2508 * (breakpoint_notify): Now returns just action and breakpoint
2510 * (gdb_get_breakpoint_list): New routine. Does the obvious.
2511 * (gdb_get_breakpoint_info): Mostly derived from the old
2512 breakpoint_notify, but returns lots more info.
2513 * (dsprintf_append_element): Helper routine, works like printf,
2514 but appends a tcl element onto the specified DString. Good for
2515 building up lists as return values.
2516 * (gdbtk_enable/disable_breakpoint): Go away. Replaced with
2517 gdbtk_modify_breakpoint.
2518 * (*many routines*): Use new result protocol.
2519 * (call_wrapper): Make sure that recursive calls don't trash results.
2520 * gdbtk.tcl: New windows, autocmd, and breakpoints.
2521 * (gdbtk_tcl_fputs): Don't use $current_output_win redirection
2522 anymore. It's not needed (in fact, this routine may not be needed
2524 * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
2525 notification protocol.
2526 * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
2528 * (interactive_cmd): Use this wrapper around button invocations
2529 of many commands. This will catch errors and put the results into
2530 the command window. It also updates all the other windows.
2531 * Also, change reliefs of most things to sunken. This actually
2533 * (create_file_win): Fix margin binding to allow breakpoints to
2535 * (create_asm_win): Use return value of gdb_disassemble instead
2536 of implicit I/O to the command window.
2537 * (create_command_window): Use new result protocol to get output
2541 Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2543 * expression.h: Move declaration of evaluate_subexp_with_coercion
2545 * value.h: ...to here.
2546 * expression.h: Don't include value.h
2548 Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2550 * expression.h: Move include of value.h until after declaration of
2553 Sun Feb 12 13:47:30 1995 Stan Shebs <shebs@andros.cygnus.com>
2555 * remote-e7000.c: Comprehensive cleanup; removal of dead code,
2556 simplify code, declare things, format to standards.
2557 (inferior.h, value.h, command.h, remote-utils.h): Include.
2558 (e7000_login): Rename to e7000_login_command.
2559 (e7000_ftp): Rename to e7000_ftp_command.
2560 (e7000_drain): Rename to e7000_drain_command.
2562 * irix5-nat.c (string.h): Include near beginning of file.
2564 Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2566 * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on
2567 arg, it is a value not a symbol.
2570 * eval.c: Move declaration of evaluate_subexp_with_coercion from here..
2571 * expression.h: ..to here.
2572 * expression.h: Include value.h.
2573 * ch-lang.c (evaluate_subexp_chill): Add default case in switch.
2575 Sun Feb 12 11:03:47 1995 Per Bothner <bothner@kalessin.cygnus.com>
2577 * language.h (struct language_defn): New field evaluate_exp.
2578 * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
2579 f-lang.c (f_language_defn), language.c (unknown_language_defn,
2580 auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
2581 Set evaluate_exp to evaluate_subexp_standard.
2582 * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
2583 support for MULTI_SUBSCRIPT.
2584 (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
2585 * eval.c (enum noside): Move from here ....
2586 * expression.h (enum noside): ... to here.
2587 (evaluate_subexp_standard): New prototype.
2588 * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
2589 Removed lo-longer-needed test for chill_varying_type.
2590 (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
2592 * ch-exp.y (maybe_expression_list): New non-terminal.
2593 (primitive_value): Allow empty parameter list.
2595 Sun Feb 12 10:02:16 1995 Per Bothner <bothner@cygnus.com>
2597 * buildsym.c (finish_block): If finishing a function without known
2598 parameter type info, set that from parameter symbols.
2599 * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC,
2600 print parameter types, if available.
2601 * ch-typeprint.c (chill_type_print_base): Likewise.
2603 * gdbtypes.h (struct type): Remove function type field.
2604 (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use
2605 function types now that we're also storing parameter types.
2606 And the payoff is much less.
2607 * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE.
2608 (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE.
2609 * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE.
2611 * valops.c (value_arg_coerce): Now takes param_type argument.
2612 (call_function_by_hand): Convert arguments with value_arg_coerce
2613 early, and overwrite original args with converted args.
2614 No longer need multiple calls to value_arg_coerce.
2615 (value_arg_push): Removed.
2616 * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce.
2617 * mips-tdep.c (mips_push_arguments): Likewise.
2618 * alpha-tdep.c (alpha_push_arguments): Likewise.
2619 * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments):
2621 * value.h (value_arg_coerce): Remove declaration. (It's now static.)
2623 * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF.
2625 * symtab.c (add_param_to_type): Remove (commented-out) function,
2626 since that functionality has been re-written.
2627 * coffread.c: Remove commented-out add_param_to_type support.
2628 * mdebugread.c (parse_symbol): Likewise.
2629 * stabsread.c (define_symbol): Likewise.
2631 Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2633 * buildsym.c (start_subfile): Set language for f2c like for cfront.
2635 Thu Feb 9 20:20:11 1995 Rob Savoye <rob@darkstar.cygnus.com>
2637 * op50n-rom.c: Add the control registers.
2639 Thu Feb 9 15:46:39 1995 Stan Shebs <shebs@andros.cygnus.com>
2641 * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
2642 after, any host/target/native libraries.
2643 * dcache.c (insque, remque): Remove declarations.
2644 * gdbtypes.h (type_code): Remove trailing comma.
2647 * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
2648 STATIC_NODEBUG_VARS inside case.
2650 Thu Feb 9 07:43:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2652 * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
2653 * partial-stab.h: Call it.
2654 * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
2655 STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
2657 * sparc-tdep.c (solaris_static_transform_name): New function.
2659 Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu)
2661 * somread.c (som_symtab_read): Handle dynamic relocation for both
2662 text and data symbols.
2663 (som_symfile_offsets): If objfile is a shared library, then get
2664 text and data offsets from the shared library structures.
2665 * somsolib.c (som_solib_add): Copy the bfd pointer from the
2666 objfile rather than reopening the file again.
2667 (som_solib_section_offsets): New function.
2668 * somsolib.h (som_solib_section_offsets): Declare.
2670 Wed Feb 8 20:32:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2672 * config/sparc/tm-sun4sol2.h, dbxread.c: Rename
2673 N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
2674 * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
2676 * elfread.c (record_minimal_symbol_and_info),
2677 minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
2678 newly created symbol.
2679 * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
2680 Set filename field of minimal symbol.
2681 * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
2682 Print filename field.
2683 * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
2684 * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
2685 m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
2686 os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
2687 printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
2688 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
2689 Find address of function from minimal symbols.
2690 * partial-stab.h, case 'f', 'F': Call find_stab_function_addr
2691 instead of getting pst->textlow from the stab.
2692 * minsyms.c (find_stab_function_addr): New function.
2694 Wed Feb 8 19:19:56 1995 Rob Savoye <rob@darkstar.cygnus.com>
2696 * monitor.c: Fix so all the output shows up in the GUI command
2699 Mon Feb 6 18:50:59 1995 Stan Shebs <shebs@andros.cygnus.com>
2701 * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
2702 line, so init.c generation works correctly.
2704 * arc-tdep.c (_initialize_arc_tdep): Ditto.
2707 Mon Feb 6 14:44:36 1995 Rob Savoye <rob@darkstar.cygnus.com>
2709 * config/mips/idt.mt: Add support for the lsi33k target.
2710 * config/sparc/sun4sol2.mh: Add support for ser-tcp.
2711 * array-rom.c: Finish the rest of the support commands needed by
2713 * mips-tdep.c: Add LSI33k register names and processor type.
2715 start-sanitize-gdbtk
2716 Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2718 * gdbtk.c (gdb_disassemble): Deference pointer to function before
2719 calling it (pre-ANSI compilers generally require this).
2722 Sat Feb 4 13:29:52 1995 Stan Shebs <shebs@andros.cygnus.com>
2724 * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
2726 Fri Feb 3 16:47:31 1995 Kung Hsu <kung@mexican.cygnus.com>
2728 * ser-go32-para.c (dos_read): fix syntax errors.
2730 Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com)
2732 * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
2733 dis_asm_read_memory_hook. We can now call the disassemblers
2734 directly and have no need for this hook anymore.
2735 start-sanitize-gdbtk
2736 * gdbtk.c (gdb_disassemble): Ditto.
2738 * defs.h, printcmd.c: Make print_insn be static.
2740 * ser-go32.c (dos_comisr): Make this 8 bit clean.
2741 * (dos_open dos_close): Allow multiple opens to the same device.
2742 Use a ref count to prevent unwanted deallocations.
2743 * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32
2745 * (sparclite_ops): Switch to download_stratum.
2746 * target.h (enum strata): Move download_stratum before
2747 process_stratum so that executable targets get pushed on top of
2750 Thu Feb 2 19:02:45 1995 Rob Savoye <rob@darkstar.cygnus.com>
2752 * array-rom.c: Remove the non GDB remote protocol config stuff.
2754 * monitor.c: All reading/writing functions for memory and
2757 Thu Feb 2 16:11:04 1995 Kung Hsu <kung@mexican.cygnus.com>
2760 * config/arc/arc.mt: new target makefile for arc processor.
2761 * config/arc/tm-arc.h: new target header for arc processor.
2762 * config/arc/go32.mh: new go32 host makefile for arc processor.
2763 * config/arc/xm-go32.h: new go32 host header for arc processor.
2764 * arc-tdep.c: new target dependent codes for arc processor.
2765 * remote-arc.c: new file for arc-specific protocol through
2768 * ser-go32-para.c: new file for go32 parallel port communication.
2770 Thu Feb 2 13:58:40 1995 Stan Shebs <shebs@andros.cygnus.com>
2772 * Makefile.in (VERSION): Bump to 4.13.2.
2774 Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2776 Fix compiler warnings:
2777 * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
2778 and have the caller do the sprintf. Saves us from varargs hell.
2779 (normal): Define before use.
2780 * remote-e7000.c: Reindent a few things.
2782 Wed Feb 1 21:16:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
2784 * f-typeprint.c (f_type_print_varspec_suffix): Print array index
2785 ranges in reverse order.
2786 * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation.
2788 * eval.c (evaluate_subscript): Don't call value_subscript, since
2789 it adjusts for lower bound and enforces ranges.
2791 * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
2792 * eval.c, parse.c: Removed uses of removed opcodes.
2793 * eval.c (evaluate_subexp): Clean up handling of
2794 OP_UNDETERMINED_ARGLIST (no backtracking, more general).
2796 * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
2797 LA_PRINT_STRING, and not val_print_string (which reads from inferior).
2799 * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
2800 duplicate function made redundant by chill_varying_type.
2802 Re-write of f77 string and complex number support:
2804 * language.h (struct language_defn): New fields string_lower_bound
2805 and string_char_type.
2806 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
2807 language.c (unknown_language_defn, auto_language_defn,
2808 local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
2809 (f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
2810 * gdbtypes.c (create_string_type): Use new string_char_type field.
2811 * valops.c (value_string): Use new string_lower_bound field.
2813 * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
2814 * f-lang.c (f_create_fundamental_type, _initialize_f_language),
2815 m2-lang.c (m2_create_fundamental_type),
2816 gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
2817 types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
2818 * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
2819 Removed. Use builtin_type_complex and builtin_type_double_complex.
2821 * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
2822 and TYPE_CODE_LITERAL_COMPLEX.
2823 * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
2824 TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
2825 * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
2826 f77_create_literal_string_type): Removed.
2827 * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
2828 VALUE_SUBSTRING_MYADDR): Removed.
2830 * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
2832 * parse.c: Update accordingly.
2834 * f-valprint.c (f77_print_cmplx): Removed.
2835 (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
2837 * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
2838 * eval.c (evaluate_subexp): For case OP_ARRAY, don't call
2839 f77_value_literal_string.
2840 * valops.c, value.h (f77_value_literal_string, f77_value_substring,
2841 f77_assign_from_literal_string, f77_assign_from_literal_complex):
2843 (value_assign): No longer need to handle literal types.
2844 * valops.c (f77_value_literal_complex), value.h: Re-written and
2845 renamed to value_literal_complex. Last arg is now a (complex) type.
2846 * valops.c (f77_cast_into_complex): Re-written and renamed to
2848 * eval.c (evaluate_subexp): Update accordingly.
2850 * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't
2851 print address for non-'s'-formats.
2852 * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead
2853 of chill_is_varying_struct.
2855 Wed Feb 1 13:27:33 1995 Stan Shebs <shebs@andros.cygnus.com>
2858 * alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
2859 (after_prologue): Remove unused local b.
2860 * procfs.c (thread.h): Include.
2861 (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
2862 nested braces in initializer.
2863 * top.c (initialize_targets, initialize_utils): Declare.
2864 (locate_arg, insert_args): Add parens around tested assignments.
2865 * remote-utils.c (sr_scan_args): Remove decl of strtol.
2866 * remote.c (thread.h): Include.
2867 (remote_wait): Remove unused local p2.
2868 * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
2871 defs.h (stdlib.h): Include.
2872 (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
2873 (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
2874 strtok, strerror): Don't specify parameter types in declaration.
2876 Wed Feb 1 12:23:57 1995 Per Bothner <bothner@kalessin.cygnus.com>
2878 * ch-exp.y (value_string_element, string_primitive_value,
2879 start_element, left_element, right_element, slice_size,
2880 lower_element, upper_element, first_element): Removed.
2881 (value_string_slice, value_array_slice): Replaced by ...
2882 (slice): New non-terminal, with working slice support.
2883 (primitive_value_lparen, rparen): New non-terminals.
2884 (maybe_tuple_elements): New non-terminal, to allow empty tuples.
2885 (idtokentab): Added "up".
2887 * value.h (COERCE_VARYING_ARRAY): New macro.
2888 * valarith.c (value_subscript): Use it.
2889 * valops.c (value_cast): Likewise. Also, do nothing if already
2890 correct type, and allow converting from/to range to/from scalar.
2892 * valops.c, value.h (varying_to_slice, value_slice): New functions.
2893 * eval.c (OP_ARRAY): Add cast for array element.
2894 * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
2895 * valops.c (chill_varying_type): Moved function frp, here ...
2896 * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
2897 * parse.c (length_of_subexp, prefixify_subexp): Add support
2898 for TERNOP_SLICE, TERNOP_SLICE_COUNT.
2899 * expprint.c (print_subexp, dump_expression): Likewise.
2900 * eval.c (evaluate_subexp): Likewise.
2902 * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
2903 value_x_binop on a Chill varying string.
2905 Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2907 * config/m68k/monitor.mt,
2908 config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
2909 depfiles in TDEPFILES not REMOTE_O.
2911 Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat>
2913 From nigel@algor.co.uk.
2914 * ser-go32.c (dos_close): Don't crash if scb null.
2915 (dos_sendbreak): New function.
2916 (dos_ops): Point to dos_sendbreak.
2917 (dos_info): Calculate COM number correctly.
2919 Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2921 * xcoffread.c (process_xcoff_symbol): Use new variables
2922 func_symbol_type and var_symbol_type as type of functions and
2923 variables which don't have any stabs associated with them.
2924 Reindent most of function.
2925 (_initialize_xcoffread): Initialize *_symbol_type.
2927 * xcoffread.c (read_xcoff_symtab): Reindent most of function.
2928 Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
2929 them (this part commented out as I didn't quite get it to work).
2930 (cs_to_section, find_targ_sec): New functions, to support above code.
2931 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
2934 Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
2935 start-sanitize-gdbtk
2936 * gdbtk.tcl (create_file_win): Disable old popup menu for source
2939 * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
2940 downloads to SPARClite demo boards.
2942 Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2944 * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had
2945 no hope of working as is for a long time (in particular, shebs' 27
2946 Jan 95 change confuses the issue further--target_read_memory and
2947 xfer_core_file do *not* do the same thing in this context).
2950 Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2952 * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for
2953 procedure linkage table symbols, it is no longer set due to the
2954 Jan 6 BFD change in bfd/elfcode.h.
2956 Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com>
2958 * top.c (use_windows): Clarify comments.
2960 * convex-tdep.c (xfer_core_file): Comment out.
2961 * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
2962 * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
2963 references to target_read_memory.
2964 * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
2966 * corelow.c (core_open, core_detach): Make static.
2968 * arm-tdep.c: Make it compile.
2969 (exec_file_command, xfer_core_file): Comment out.
2970 (arm_print_insn): Remove, now in libopcodes.
2971 (skip_prologue): Comment out most of body.
2972 (arm_frame_find_saved_regs): Move here from tm-arm.h.
2973 (_initialize_arm_tdep): Set tm_print_insn.
2974 * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
2975 (XFER_CORE_FILE): Remove.
2976 (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
2978 Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
2980 * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
2982 Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
2984 * symtab.c (find_pc_line): When subtracting one to get a line
2985 number, make sure not to end up with zero.
2987 * remote-vx.c: Revert all of Kung's changes of 16 Jan. The
2988 problems with those changes were (a) the file didn't compile, (b)
2989 they changed memset to bzero--memset is correct, (c) they took out
2990 code to deal with boards lacking floating point, (d) who knows
2991 what I didn't discover in a quick read.
2993 Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com)
2995 * sparcl-tdep.c: Clean up formatting and indentation.
2997 Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat>
2999 * remote-hms.c (hms_ops): Change ref of hr_load_image
3001 (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
3002 dcache_poke, dcache_init): Deleted.
3003 (hms_open, hms_resume, hms_fetch_word, hms_store_word):
3004 Use dcache routines provided by remote-util.h
3006 Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com>
3008 * configure.in: Add support for powerpc-*-eabi.
3010 * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
3013 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
3015 * language.h (struct language_defn): New field c_style_arrays.
3016 * language.c (unknown_language_defn, auto_language_defn,
3017 local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
3018 asm_language_defn): Set c_style_arrays to true.
3019 * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
3020 f-lang.c (f_language_defn): Set c_style_arrays to false.
3021 * valops.c (value_string): If c_style_array is not set,
3022 allocate string in gdb (not inferior) using allocate_value.
3024 * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
3025 Only call value_coerce_array if current_language->c_style_arrays.
3026 * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.)
3028 * valops.c (chill_varying_type): New predicate.
3029 * valops.c (value_cast): Support assigning a fixed string or array
3030 to a variable string/array structure.
3032 * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound.
3033 Check index>=lowerbound, and then add lowerbound to index here,
3034 instead of in caller. Generalize to arbitrary lval_types.
3035 (value_subscript): Use enhanced value_subscripted_rvalue if
3036 c_style_arrays is false (and index is in range).
3038 start-sanitize-gdbtk
3039 Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
3041 * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
3043 * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
3044 popping up expression window for the first time.
3047 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
3049 * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset:
3050 TYPE_LENGTH is length in bytes, not bits.
3052 Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
3054 * infrun.c (proceed): Flush stdout before resuming inferior.
3055 * infcmd.c (step_1), annotate.c (annotate_starting):
3056 Don't bother to flush here.
3058 Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu)
3060 * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
3061 by an ill-advised global search and replace.
3063 Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
3065 * gdbtk.tcl (create_registers_window): Work around a radiobutton
3066 widget bug to make Options|Natural button work.
3068 * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
3069 g++ caused by out-of-order pc's.
3070 * gdbtk.tcl (files_command): Remove duplicate file names. Also,
3073 Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
3075 * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
3078 Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com>
3080 Add support for Chill bitstring literals (e.h. H'FF00').
3081 * ch-exp.y (match_bitstring_literal): Fix for proper endianness.
3082 * expprint.c (print_subexp): Don't call error on OP_BITSTRING,
3083 just print B'<unimlemented>'.
3084 * gdbtypes.c (create_set_type): Fix bug in length calculation.
3085 * valops.c, value.h (value_bitstring): New function.
3086 * eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
3088 * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
3089 check that return type is non-void, and print in proper Chill syntax.
3091 Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com>
3093 * Makefile.in: Remove references to remote-mon.c.
3094 * remote-mon.c: remove. Replaced by rom68k-rom.c.
3095 * rom68k-rom.c: Support for Rom68k monitor.
3097 Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
3099 * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
3100 gcc/ch/runtime not chillrt, since that is where the chill runtime
3103 Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat>
3105 * remote-hms.c (hms_load): Delete.
3106 (target_ops): Use hr_load_image.
3108 * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
3109 Define memory_insert/remove_breakpoint.
3110 * xm-go32.h: Remove redundant SIGs.
3112 Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat>
3114 * ser-go32.c: Rewritten by nigel@algor.co.uk.
3116 Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
3118 * expression.h (OP_LABELED): New operator, for Chill
3119 labeled structre tuples.
3120 * ch-exp.y (tuple_element, named_record_element, tuple_elements):
3121 New non-terminals, to handle labeled structure tuples.
3122 (tuple): Re-define using tuple_elements.
3123 * eval.c (evaluate_labeled_field_init): New function, to handle
3124 initialization of structure fields, possibly using OP_LABELED.
3125 (evaluate_subexp): Use it.
3126 * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
3127 for Chill. Handled OP_LABELED.
3128 * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
3130 * eval.c (evaluate_subexp): Handle Chill Powerset tuples.
3131 * valarith.c (value_bit_index): Just treat bitstring as represented
3132 by an array of bytes. Alignment is handled by compiler.
3134 Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3136 * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
3137 * sh-tdep.c (gdb_print_insn_sh): Ditto.
3139 Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com>
3141 * remote-os9k.c (rombug_open): Fix a bug in exception handling
3143 * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
3146 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
3148 * parse.c (_initialize_parse): Improve wording of names of
3151 Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3153 * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
3154 (mips_fpu): Change type to enum mips_fpu_type.
3155 (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
3156 * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
3158 (mips_fpu_string): New static variable.
3159 (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
3160 (mips_pop_frame): Likewise.
3161 (mips_extract_return_value): Likewise.
3162 (mips_store_return_value): Likewise.
3163 (mips_set_fpu_command): New static function.
3164 (mips_show_fpu_command): New static function.
3165 (_initialize_mips_tdep): Change handling of set/show mipsfpu.
3167 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
3169 * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
3171 * parse.c (write_exp_msymbol): Use new variables
3172 msym_*_symbol_type as type of msymbol expression.
3173 (_initialize_parse): Initialize them.
3175 Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com>
3177 General cleanup and simplication of disassembler interface.
3178 * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
3179 hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
3180 m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
3181 rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
3182 * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
3183 had been -pinsn.c files.
3184 * Makefile.in (ALLDEPFILES): Remove removed files.
3185 (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
3186 hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
3187 m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
3188 rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
3189 Remove compile actions.
3190 * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
3191 vax-tdep.o: Add compile actions.
3192 * defs.h (tm_print_insn): New global.
3193 * a29k-tdep.c (gdb_print_insn_a29k): New function.
3194 (_initialize_a29k_tdep): Rename from _initialize_29k,
3196 * alpha-tdep.c (print_insn): Remove.
3197 (_initialize_alpha_tdep): Set tm_print_insn.
3198 * arm-tdep.c (arm_print_insn): New function, was print_insn
3200 * convex-tdep.c (convex_print_insn): New function, was print_insn
3202 * h8300-tdep.c (print_insn): Remove.
3203 (gdb_print_insn_h8300): New function.
3204 (_initialize_h8300_tdep): New function.
3205 * h8500-tdep.c (print_insn): Remove.
3206 (_initialize_h8500_tdep): New function.
3207 * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
3208 * i386-tdep.c (_initialize_i386_tdep): New function.
3209 * i960-tdep.c (mem, next_insn): New functions, were in
3211 (_initialize_i960_tdep): Set tm_print_insn.
3212 * m68k-tdep.c (_initialize_m68k_tdep): New function.
3213 * m88k-tdep.c (_initialize_m88k_tdep): New function.
3214 * mips-tdep.c (gdb_print_insn_mips): New function.
3215 (_initialize_mips_tdep): Set tm_print_insn.
3216 * pyr-tdep.c (pyr_print_insn): New function, was print_insn
3218 * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
3219 * sh-tdep.c (print_insn): Remove.
3220 (gdb_print_insn_sh): New function.
3221 (_initialize_sh_tdep): Set tm_print_insn.
3222 * sparc-tdep.c (_initialize_sparc_tdep): New function.
3223 * w65-tdep.c (print_insn): Remove.
3224 (_initialize_w65_tdep): New function.
3225 * z8k-tdep.c (print_insn): Remove.
3226 (gdb_print_insn_z8k): New function.
3227 (_initialize_z8k_tdep): Set tm_print_insn.
3228 * printcmd.c (print_insn): New function, generic disassembler.
3229 * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
3231 Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com>
3233 * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
3234 and config/a29k/vx29k.mt.
3235 * configure.in: add new configuration a29k-*-vxworks.
3236 * remote-vx29k.c: new file merged from WRS.
3237 * remote-vx.c: merge changes from WRS.
3238 * config/a29k/vx29k.mt: new file for new configuration.
3239 * config/a29k/tm-vx29k.h: new header file for newconfiguration.
3241 Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat>
3243 * breakpoint.h (disable_breakpoint, enable_breakpoint):
3245 (enum bpdisp): Change name of 'delete' member to 'del'.
3246 (struct bpstat): Changed name to 'bpstats'.
3247 * breakpoint.c (disable_breakpoint, enable_breakpoint,
3248 breakpoint_chain): Made globally visible.
3249 (bpstat_stop_status): Use new name for bpstat.
3250 (break_command_1, watch_command_1, catch_command_1,
3251 breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
3252 instead of 'delete'.
3253 (set_breakpoint_sal): New function.
3254 * defs.h (registers_changed_hook): New declaration.
3255 * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
3256 * inflow.c (new_tty): Treat WIN32 in same way as __GO32__
3257 * main.c (main): Don't scan options when in WIN32 and exit
3258 without entering main loop.
3259 * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
3260 * symtab.h (struct symbol, struct partial_symbol): Changed name of
3261 member 'class' to 'aclass'.
3262 (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
3263 * top.c (registers_changed_hook): New definition.
3264 * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
3265 in same way as __GO32__.
3266 * value.h (c_typedef_print): Rename 'new' argument.
3268 * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
3269 * configure.in: Suppprt for w65,
3272 Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
3274 * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
3275 not stop_pc, to proceed.
3277 * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
3279 Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
3281 * infcmd.c (signal_command): Accept "signal 0"; the change to not
3282 accept it was accidental. "handle 0" and "info signal 0" remain
3285 Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3287 * Makefile.in (all): Don't make libgdb-files.
3288 (libgdb): New action, makes libgdb-files.
3290 Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com>
3292 * stabsread.c (read_enum_type): When pending enum symbols are
3293 put into the enum type, they must be inserted in "backwards
3294 order, in case we've overflowed a struct pending buffer.
3296 start-sanitize-gdbtk
3297 Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
3299 * gdbtk.c, gdbtk.tcl: Update/add copyright.
3300 * gdbtk.tcl (build_framework): Several fixes for filespec widget,
3301 including dismiss button, and better error handling.
3302 * (create_command_win): Bind button 2 to retrieve selection.
3305 Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3307 * README: Add note about SPARCworks cc release 3.0 and higher.
3309 Add procfs support for Alpha OSF/1-2.x.
3310 * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
3311 OSF/1 native support.
3312 * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
3313 (MUNCH_DEFINE): Removed.
3314 * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
3316 * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
3317 release 2.x and higher, else alpha-osf1.mh, as the procfs support
3318 in release 1.x is incomplete.
3319 * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
3320 * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
3321 fill_fpgregset): New routines for procfs support.
3322 * inftarg.c (_initialize_inftarg): Don't add ptrace support
3323 if we have an optional procfs and /proc is accessible.
3324 * procfs.c: Include sys/fault.h and sys/syscall.h before
3325 including sys/procfs.h.
3326 (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
3327 is defined, additionally perform a PIOCSSIG to really terminate
3329 (create_procinfo): Always return a result.
3330 (create_procinfo, do_attach): Don't trace T_IFAULT faults if
3331 PROCFS_DONT_TRACE_IFAULT is defined.
3332 (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
3333 argument to startup_inferior if it is defined.
3334 (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
3335 of tracing exits from exec system calls. Needed for the user level
3336 loader under Alpha OSF/1.
3337 (do_detach): Clear any pending signal if we want to detach from
3338 a process without a signal.
3339 (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
3340 don't issue a PIOCSSIG if pr_cursig already contains the signal we
3342 (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
3343 pending signals are numbered from 1 instead of 0.
3344 (info_proc_mappings): Increase size of output format for addresses
3345 if BFD_HOST_64_BIT is defined.
3346 (procfs_stop): Renamed from child_stop.
3347 (_initialize_procfs): Don't add procfs support if we have an
3348 optional procfs and /proc is not accessible.
3350 start-sanitize-gdbtk
3351 Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
3353 * gdbtk.tcl: Add button to control mixed source disassembly.
3354 Use text widgets in expr window. The give me more control over
3356 Add auto-updating of exprs in expression window.
3357 Handle expressions out of scope a bit better.
3358 Make selected window pop up to the top when invoked via the
3360 Make copyright message have raised relief.
3362 * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
3366 Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com>
3368 * array-rom.c: Add support for most commands.
3370 * monitor.c: Add GDB remote protocol for the hybrid environment on
3373 Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu)
3375 * command.c (show_user_1): Use print_command_line to show a user
3376 defined command (including control structures).
3378 * top.c (init_main): Change documentation for user defined
3379 commands to indicate they may accept up to ten arguments.
3381 Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
3383 * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
3384 `move $s8, $sp' instruction.
3386 Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
3388 * target.c, target.h (target_signal_from_command): New function.
3389 * infrun.c (handle_command, signals_info), infcmd.c
3390 (signal_command): Use it.
3391 * infrun.c, infcmd.c: Update docstrings for these commands.
3393 * target.h (enum target_signal), target.c (signals), target.c
3394 (target_signal_from_host, target_signal_to_host): Add
3395 TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
3396 * config/tm-lynx.h: Define signal numbers for realtime events.
3398 Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3400 * dbxread.c (process_one_symbol): Handle N_FUN symbols
3401 for Sun acc 3.0 under SunOS4.
3403 Changes to improve handling of runtime common symbols
3405 * minsyms.c (get_symbol_leading_char): New routine to determine
3406 the leading symbol character for an objfile.
3407 (prim_record_minimal_symbol_and_info, install_minimal_symbols):
3409 * objfiles.h (rt_common_objfile): New global, points to objfile
3410 containing the runtime common minimal symbols.
3411 * objfiles.c (free_objfile): Mark rt_common_objfile as
3412 unallocated before freeing it.
3413 * solib.c (allocate_rt_common_objfile): New routine to allocate
3414 an objfile for the runtime common minimal symbols.
3415 (solib_add_common_symbols): Allocate an objfile for the runtime
3416 common symbols if necessary and put common symbols into it.
3417 Clean up code and comments.
3418 (solib_add, special_symbol_handling): Cleanup comments regarding
3419 runtime common symbols.
3420 * stabsread.c (scan_file_globals_1): New routine, contains
3421 old scan_file_globals code. Checks if there are any unresolved
3422 global symbols before starting the expensive minimal symbol table
3424 (scan_file_globals): Now calls scan_file_globals_1 for the passed
3425 objfile and eventually for the runtime common objfile. Complains
3426 about any unresolved global symbols and removes them from the
3427 global symbol chain to avoid dangling pointers into the symbol
3428 table if the symbol table is reread.
3430 Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
3432 * Makefile.in (install_only uninstall): Indent for clarity.
3434 * core.c (dis_asm_read_memory): Add call to
3435 dis_asm_read_memory_hook to provide alternate way for disassembler
3438 * defs.h: Protect from multiple inclusion. Add decl for
3439 dis_asm_read_memory_hook.
3441 * top.c: Make window startup be the default.
3442 * Add dis_asm_read_memory_hook.
3444 start-sanitize-gdbtk
3445 * gdbtk.c (finish_saving_output): Don't do anything if not saving
3447 * (breakpoint_notify): Don't send null filename to tcl.
3448 * (gdb_eval): New tcl command to eval an expression.
3449 * (gdb_disassemble): New tcl command to do disassembly. This
3450 allows tcl code to choose between exec file and target memeory,
3451 and can also do mixed source and assembly.
3452 * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
3453 that more of the environment is set up. Also, create link between
3454 gdb and tcl vars disassemble{-_}from{-_}exec.
3456 * gdbtk.tcl: New expression window support.
3457 * Make assembly window be 80 columns wide.
3458 * Use new disassembly method. Add menu items to select
3459 disassembly from exec file or target.
3460 * Change View menubar item to Options.
3462 * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
3463 since they don't exist yet.
3465 * Pop up a copyright window on startup.
3468 Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu)
3470 * stabsread.c (define_symbol): Handle `a' symbol type used for
3471 reference parameter passed in a register.
3473 start-sanitize-gdbtk
3474 Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
3476 * gdbtk.tcl (build_framework): Add standard commands menu, more
3477 windows to standard windows menu.
3478 (not_implemented_yet): Clarify message.
3481 Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com>
3483 * defs.h: move include tm.h up, so that the type LONGEST can
3484 also based on the target requirement to determine. In this case
3487 * remote-os9k.c (rombug_open): catch exception e in rombug.
3488 * remote-os9k.c (rombug_wait): print message before register display
3491 Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
3493 * top.c (locate_arg): Call strchr not index.
3495 Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
3497 * ch-exp.y (literal): Recognize NULL.
3498 (tuple): Parse simple unlabelled tuples.
3499 * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
3500 evaluate brace-initializer-expressions depending on context.
3501 (evaluate_subexp case UNOP_CAST): Pass the target type as
3502 expected type when evaluating the expression.
3504 * ch-typeprint.c (chill_type_print_base): Get names of PTR and
3505 BOOL from TYPE_NAME.
3506 * ch-valprint.c (chill_print_type_scalar): New function, to handle
3507 TYPE_CODE_RANGE better than print_type_scalar does.
3508 (chill_val_print_array_elements): Use above new function.
3510 Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com>
3512 * remote-udi.c (udi_load): Tell symbol_file_add that the
3513 program being loaded is the main program.
3515 For older changes see ChangeLog-94
3521 version-control: never