1 Mon May 12 11:35:04 1997 Mark Alexander <marka@cygnus.com>
3 * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
4 basic C80 features working.
6 Thu May 8 08:42:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
8 * configure.in (AC_TYPE_SIGNAL): Add
9 * configure: Re-generate.
10 * remote-sim.c: Signal returns RETSIGTYPE.
13 Wed May 7 19:10:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
15 * gdbtk.c (wrapped_call): New function - make actual call to tk
17 (call_wrapper): Rewrite to use top.c:catch_errors.
19 * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
23 Wed May 7 20:05:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
25 * target.h (target_stop): Drop argument so it can be tested for
28 Sat May 3 20:51:48 1997 Mark Alexander <marka@cygnus.com>
30 * utils.c (floatformat_from_doublest): Handle infinity properly.
32 Thu May 1 11:44:46 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
34 * Finalize merge from Hurd folk.
35 Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
36 * thread.c (thread_apply_command, thread_apply_all_command,
37 thread_command): Make sure TP is alive.
38 (thread_alive): New function.
39 Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
40 * infrun.c (sig_print_info): Deal better with long signal names.
41 Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
42 * thread.c (thread_id_to_pid): New function.
43 Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
44 * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
45 set_thread_default_cmd_list, show_thread_default_cmd_list):
46 New variables. (set_thread_cmd, show_thread_cmd,
47 set_thread_default_cmd, show_thread_default_cmd): New functions.
48 Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
49 * gnu-nat.c (inf_startup): remove TASK parameter.
50 (inf_set_task): replace with new function (inf_set_pid).
51 * gdbthread.h: Add extern decl for thread_cmd_list.
53 Thu May 1 02:28:21 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
55 * printcmd.c (disassemble_command): Adjust low function bound
56 by FUNCTION_START_OFFSET.
59 Wed Apr 30 15:23:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
61 * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
64 Mon Apr 28 21:25:32 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
66 * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
67 * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
68 in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
69 satisfy symbol dependancy in solib.c (core_ops).
70 * target.[ch] conditionalize Mach-specific signals so that they
71 won't show up in non-Mach gdb's!
72 * thread.c: change name of static function "thread_switch" to
73 "switch_to_thread", to avoid conflict with Mach global symbol;
74 move thread_cmd_list to global scope so targets can add their
76 * infrun.c: sig_print_info: allow for long signal names.
77 * gnu-nat.[ch]: tidying up comments.
78 * gnu-nat.c: remove calls to prune_threads and renumber_threads;
79 gnu_wait must not return -1 when inferior exits;
80 attach_to_child will modify inferior_pid in a way that allows
81 fork_inferior to remain unchanged; remove extra arg from
82 startup_inferior; move Mach thread commands here from thread.c.
84 Mon Apr 28 18:21:20 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
86 * symtab.c: decode_line_1, replace the assignment to
87 values.sals[0].pc which I accidentally left out on 4/3/97.
89 Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
91 * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
93 * top.c: change "to enable to enable" to "to enable" in a couple
96 Mon Apr 28 09:01:59 1997 Mark Alexander <marka@cygnus.com>
98 * breakpoint.c (remove_breakpoint): Pass correct type to
99 target_remove_watchpoint.
100 * target.h: Improve comment for target_{remove,insert}_breakpoint.
102 Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
104 * alpha-tdep.c (heuristic_proc_desc): Increase search limit
105 for return address register, handle `ret' instruction.
107 * corelow.c (get_core_registers): Initialize cf.
109 * procfs.c: Minor changes to make pre-ANSI compilers happy.
110 (procfs_notice_signals): Copy traced signal set back to
112 (unconditionally_kill_inferior): If PR_DEAD is defined,
113 rerun inferior after killing it.
115 Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com)
117 * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
118 structure value address is found in $a0 now.
119 * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
121 Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com)
123 * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
125 (EXTRACT_RETURN_VALUE): Likewise.
127 * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
128 insn at "pc", not "fi->pc".
131 Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
133 * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
134 (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
135 MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
136 (NPC_REGNUM): Tic80 has a delay slot.
137 (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
141 Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
143 * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
145 (EXTRACT_RETURN_VALUE): Likewise.
147 Tue Apr 22 11:58:15 1997 Fred Fish <fnf@cygnus.com>
149 * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
150 floatformat_ieee_double_littlebyte_bigword for little endian
152 * utils.c (floatformat_to_doublest): Create local preswapped
153 copy of input for floatformat_littlebyte_bigword formats.
154 (get_field, put_field): Treat floatformat_littlebyte_bigword
155 the same as floatformat_little.
156 (floatformat_from_doublest): Postswap output words for
157 the floatformat_littlebyte_bigwords format.
160 Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
162 * config/tic80/tic80.mt (SIM): Link in simulator.
165 Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
167 * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
168 config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
169 vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
170 aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
174 Remove -lm. That's now handled by configure.
176 * Makefile.in (maintainer-clean): Add distclean to dependencies.
177 Remove duplicate rm's of files.
180 Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
182 * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
185 Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
187 * remote-pa.c: Remove. It's broken and no longer necessary.
189 Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
191 * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
192 (Avoids name clash with broken AIX header files.)
194 Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
196 * serial.c (serial_log_command): Fix fputs_unfiltered calls.
198 * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
199 (DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
200 * xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
202 * exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
203 tstart and dstart with section VMA.
204 * rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
206 (vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
207 of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
208 (vmap_exec): Relocate relative to the VMA in the object file,
209 relocate .bss section as well.
210 (xcoff_relocate_core): No longer adjust section addresses by VMA.
211 * rs6000-tdep.c (find_toc_address): Change type of tocbase
213 * xcoffread.c (secnum_to_bfd_section): New routine to get
214 BFD section from CS section number.
215 (scan_xcoff_symtab): Make toc_offset section relative.
217 * symtab.c (total_number_of_methods): Avoid core dump if
218 baseclass type is still undefined.
220 Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com)
222 * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
224 * defs.h utils.c (error warning): Make message be const.
225 * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
226 to hook. Otherwise send it to fputs.
227 * monitor.c monitor.h (monitor_get_dev_name): New function. Does
229 * remote-e7000.c: Remove debugify stuff. Change printf, fprintf
230 to _filtered forms to make output appear in GUIs. Replace all
231 uses of SERIAL_READCHAR with readchar, which has better error
233 * (e7000_parse_device): Add prototype.
234 (readchar): Improve doc. Handle random serial errors.
235 (expect): Disable notice_quit code. It's busted. Remove
236 serial error handling (it's now handled in readchar). Remove
237 remote_debug echoing. That's handled in readchar as well.
238 (e7000_parse_device): Remove serial_flag arg. It's not
240 (e7000_open): Split into two pieces. Second part is
241 e7000_start_remote, and is error protected. Now, when we connect
242 to the target, we setup the initial frame and registers so that
243 the user gets an immediate indication of where the target is.
244 (gch): Remove debug output. That's handled by readchar.
245 (e7000_read_inferior_memory): Handle errors better.
246 (_initialize_remote_e7000): Get rid of `<xxx>' things from
247 command names. They show up when doing completion and confuse
249 * ser-e7kpc.c: Get rid of the DLL's since we can access the device
250 directly from Win32s and Win95. Get rid of debugify crud.
251 * serial.c: Remove debugify cruft.
252 * (serial_logchar serial_log_command serial_write serial_readchar
253 serial_send_break serial_close): Merge common functionality into
254 serial_logchar. Clean up rest of routines.
255 * sparclet-rom.c: Disembowel. Leave only download routine.
256 Download routine now switches to remote target automatically.
257 * top.c (disconnect): Only define if SIGHUP is defined. Cleans
258 up MSVC/Win32 problem.
259 * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
261 * config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
262 * config/sparc/tm-sparclet.h: Remove override for prompt.
264 Fri Apr 18 13:38:19 1997 Doug Evans <dje@canuck.cygnus.com>
266 * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
267 TARGET_BYTE ORDER_SELECTABLE.
269 Fri Apr 18 16:52:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
271 * remote-sim.c (init_callbacks): Initialize poll_quit and magic
272 fields of gdb_callback.
273 (gdbsim_stop): Add gdbsim_stop to list of supported client
275 (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
276 sim_wait where gdb is in a position to handle a long running
278 (gdbsim_cntrl_c): New function. Wrap the sim_resume call in a
280 (gdb_os_poll_quit): New function. Check for a quit pending on the
284 Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
286 * Makefile.in (install-only): Make list of gdbtcl files to install
287 explicit - was picking up files such as ChangeLog etc.
288 (install-only): Don't blindly create the directory.
291 Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
293 * defs.h (enum language): Add language_java.
294 * java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
295 * Makefile.in: Update for new files.
296 * objfiles.c (allocate_objfile): Allow NULL bfd argument.
297 * symfile.c (deduce_language_from_filename): Recognize .java.
299 Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
301 * m32r-stub.c (stash_registers): Rewrite.
302 (restore_registers): Renamed to restore_and_return.
303 (cleanup_stash): New function.
304 (process_exception): New function.
305 (_catchException*): Rewrite.
307 * remote-sim.c (gdbsim_load): Update call to sim_load.
308 (gdbsim_create_inferior): No longer pass start_address to
310 (gdbsim_open): Pass endian indicator as arg.
312 Tue Apr 15 15:31:09 1997 Stan Shebs <shebs@andros.cygnus.com>
314 * remote.c (get_offsets): Don't use scanf for interpreting
315 response to qOffsets.
317 Tue Apr 15 14:51:04 1997 Ian Lance Taylor <ian@cygnus.com>
319 * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
320 (INSTALL_XFORM1): Remove.
321 (install-only): Use $(program_transform_name) directly, rather
322 than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
323 (uninstall): Transform name.
325 Mon Apr 14 17:06:27 1997 Mark Alexander <marka@cygnus.com>
327 * remote-mips.c (mips_load): Ensure that PC gets updated
328 after a load on LSI target.
330 Mon Apr 14 15:54:51 1997 Geoffrey Noer <noer@pizza.cygnus.com>
332 * procfs.c (notice_signals): fix typo
334 Mon Apr 14 16:25:10 1997 Ian Lance Taylor <ian@cygnus.com>
336 * gdbserver/Makefile.in (INSTALL): Change install.sh to
339 Mon Apr 14 11:55:27 1997 Geoffrey Noer <noer@pizza.cygnus.com>
341 * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
342 since gcc automatically includes it
344 Thu Apr 10 13:20:53 1997 Geoffrey Noer <noer@cygnus.com>
346 * procfs.c: Substantial (but incomplete) changes to support
347 sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
348 struct now has substructs like struct flt_ctl instead of
349 just a fltset_t and has a ctl_fd, status_fd, as_fd, and
350 map_fd instead of a single fd. Non-sysv4.2mp procfs models
351 still have the structs and multiple fds, but don't use the
352 entire struct and the four fds all point to the same thing.
353 We use PROCFS_USE_READ_WRITE to decide whether to talk to
354 procfs with reads/writes or use ioctl instead. We use
355 HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
356 multiple fds or not. PROC_NAME_FMT is split out into
357 CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
358 STATUS_PROC_NAME_FMT.
360 (procfs_notice_signals): now a necessary wrapper around
361 (notice_signals): which are the new guts for noticing signals
362 (open_proc_file): gets a new flag arg used in sysv4.2mp to
363 determine whether or not to attempt to open the ctl_fd.
364 (procfs_read_status): new local function, reads procfs status
365 (procfs_write_pcwstop): new local function, writes a PCWSTOP
366 (procfs_write_pckill): new local function, writes a PCKILL
367 (unconditionally_kill_inferior): remove signo since we now
368 just call procfs_write_pckill().
369 (procfs_xfer_memory): call lseek with SEEK_SET rather than 0
370 (proc_iterate_over_mappings): the whole function is ifdefed
371 on UNIXWARE to keep things readable.
373 Expanded the syscall_table to include new potential sysv4.2mp
374 members. Note that all ifdefs of UNIXWARE should be eliminated
375 if possible or renamed to describe what's being selected for a
376 bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
377 IRIX specific code now also checks it's not UNIXWARE.
379 * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
380 HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
381 * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
382 "/debug/%d" as PROC_NAME_FMT used to be
384 Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com)
386 * mn10300-tdep.c: Almost completely rewritten based on mn10200
388 * config/mn10300/tm-mn10300.h: Likewise.
390 Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com)
392 * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove
393 remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a
394 lousy out-of-date clone of remote.c.
396 Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com)
398 * remote.c: Fix problems realized while showering.
399 * (hexnumlen): Add prototype. Use max, not min.
400 * (remote_write_bytes remote_read_bytes): Fix max packet size
401 calculations to properly account for packet overhead. Also handle
402 (probably rare) case where remote_register_buf_size isn't set.
404 * remote.c: Fix doc for `C' and `S' commands to indicate full
406 * (remote_ops extended_remote_ops remote_desc remote_write_size):
408 * (remote_fetch_registers remote_write_bytes remote_read_bytes):
409 Record size of response to fetch registers command, use this to
410 limit size of memory read and write commands.
411 * (push_remote_target): New function to make it possible to have
412 another target switch to the remote target.
413 * target.h: Add prototype for push_remote_target.
414 * sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
415 for hosts which default to unsigned chars (such as SGI's).
416 * (_initialize_sh_tdep): Don't set remote_write_size. It's now
417 handled automatically in remote.c.
419 Thu Apr 3 15:10:30 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
421 * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
422 find_pc_sect_function(), find_pc_sect_partial_function(): new
423 functions for debugging overlays; pc without section is ambiguous.
424 * breakpoint.[ch]: add section pointer to breakpoint struct;
425 add section argument to check_duplicates(); check section as well
426 as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
427 breakpoint_thread_match(), bpstat_stop_status()];
428 add section argument to describe_other_breakpoints();
429 use INIT_SAL() macro to zero-out new sal structures;
430 make resolve_sal_pc() fix up the sal's section as well as its pc;
431 match on section + pc in clear_command() and delete_breakpoint();
432 account for overlay sections in insert_breakpoints(),
433 remove_breakpoint() and breakpoint_re_set_one();
434 all this to support overlays where a PC is not unique.
435 * exec.c: change xfer_memory() to handle overlay sections.
436 * findvar.c: change read_var_value() to handle overlay sections.
437 * frame.h: declaration for block_for_pc_sect() [blockframe.c].
438 * infcmd.c: jump_command() warns against jumping into an overlay
439 that's not in memory. Also use INIT_SAL() to initialize sals.
440 * infrun.c: wait_for_inferior() sets a flag to invalidate cached
441 overlay state information; Also use INIT_SAL() to init sals.
442 * m32r-rom.c: modify load routines to use LMA instead of VMA.
443 * m32r-stub.c: mask exit value down to 8 bits; screen out any
444 memory read/writes in the range 600000 to a00000, and ff680000
445 to ff800000 (hangs because nothing is mapped there); fix strcpy().
446 * maint.c: maintenance command "translate-address" supports overlays.
447 * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
448 * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
449 this constitutes gdb's internal overlay mapping table. Add macro
450 ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
451 Add function find_pc_sect_section().
452 * printcmd.c: modify print_address_symbolic() with overlay smarts;
453 modify address_info() with overlay smarts; add function sym_info()
454 to support the INFO SYMBOL command (translate address to symbol(s));
455 modify disassemble_command() to work on unmapped overlays.
456 * source.c: use INIT_SAL() to initialize sals.
457 * symfile.[ch]: change generic_load() to use section's LMA address
458 instead of VMA address, for overlay sections.
459 Add numerous functions for finding a PC's section / overlay,
460 translating between VMA and LMA address ranges, determining if an
461 overlay section is mapped, etc. Add several user commands for
462 overlay debugging. Add support for a "generic" form of automatically
463 reading overlay mapping info from the inferior (based on the default
464 (simple) overlay manager which Cygnus provides as an example).
465 * symtab.[ch]: add functions find_pc_sect_symtab(),
466 find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
467 for lookup; modify lookup_symbol and decode_line_1() to use them;
468 modify find_function_start_sal() to account for overlay sections;
469 add macro INIT_SAL() for initializing struct symtab_and_line.
470 * target.c: fix a comment in the declaration of target_ops.
472 Thu Apr 3 10:31:12 1997 Mark Alexander <marka@cygnus.com>
474 * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
475 mips_skip_stub, mips_ignore_helper): New functions for dealing
476 with MIPS16 call/return thunks.
477 (mips_init_frame_pc_first): New function to implement
478 INIT_FRAME_PC_FIRST macro; includes code from old macro plus
479 new code to skip over MIPS16 thunks.
480 (mips_frame_chain): Skip over MIPS16 thunks.
481 * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
482 mips_skip_stub, mips_ignore_helper): Declare.
483 (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
484 SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
486 (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
487 (mips_init_frame_pc): Declare.
488 * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
489 to decide if certain library function calls should be ignored.
491 Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
493 * remote-sim.c (gdbsim_open): Check return code from sim_open.
494 Update call to sim_open (new arg SIM_OPEN_DEBUG).
497 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
499 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
503 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
505 * gdbinit.in: New file.
507 * configure.in: Generate .gdbinit from gdbinit.in.
508 * configure: Rebuild.
511 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
513 * config/tic80/tic80.mt: Disable using the simulator
517 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
519 * COPYING: Install new version of file from FSF.
520 * copying.c (show_copying_command): Update FSF address.
522 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
524 * Makefile.in (distclean): Remove .gdbinit.
527 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
529 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
532 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
534 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
535 to va_list from void *, since va_list might not be a pointer
539 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
541 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
542 default, not $(srcdir).
545 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
547 * remote-mips.c: Clean up comment and extraneous semicolon
548 for mips_monitor_prompt variable.
550 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
552 * remote-mips.c: Add `set monitor-prompt' command.
554 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
556 Fix from Peter Schauer:
557 * mdebugread.c (parse_procedure): Set address of procedure to
558 block start; this fixes problems with shared libraries introduced
561 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
563 * symtab.c (find_pc_symtab): change to support the case
564 where the objfile is reordered and contains both coff and
565 stabs debugging info (continue on if a psymtab isn't found).
567 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
569 Fixes from Peter Schauer:
570 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
571 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
572 is big-endian and if registers are 32 bits.
573 * mips-tdep.c (mips_print_register, mips_extract_return_value,
574 mips_store_return_value): Fix floating-point word-order problems on
575 little-endian targets introduced by changes of Mar 21.
577 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
579 * remote.c (target_resume_hook, target_wait_loop_hook): New
581 (remote_resume, remote_wait): Use them.
582 * d10v-tdep.c: Set the above hooks.
583 (tracesource): New GDB variable, controls source display in
585 (display_trace): Find and display source line if requested.
586 (trace_info): Mention empty trace buffer if appropriate.
587 (tdisassemble_command): Robustify argument handling.
589 * configure.host: Remove extra bogus Linux case.
591 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
593 * remote-sim.c (simulator_command): Add comment about dealing with
596 * Makefile.in (tic80-tdep.o): Add target.
597 * configure.tgt: Add tic80 case.
598 * tic80-tdep.c: New file.
599 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
602 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
604 * c-exp.y (yylex): Handle nested template parameter lists.
605 * symtab.c (decode_line_2): Fix test for valid choice number.
607 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
609 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
610 copy first two floating point arguments to general registers, so that
611 MIPS16 functions will receive the arguments correctly.
612 (mips_print_register): Print double registers correctly on
614 (mips_extract_return_value): Return double values correctly
615 on little-endian hosts.
617 * mdebugread.c (parse_procedure): Adjust address of procedure relative
618 to address in file descriptor record; this accounts for constant
619 strings that may precede functions in the text section. Remove
620 now-useless lowest_pdr_addr from argument list and all calls.
622 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
624 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
625 whether the simulator will be built by whether the Makefile in the
626 simulator directory was built.
628 * configure.in (--enable-sim-powerpc): Delete switch.
629 * configure: Regenerate.
631 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
633 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
636 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
638 (gdb_os_evprintf_filtered): Similarly.
640 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
642 New UnixWare 2.1 configuration
643 * config/i386/i386v42mp.mt: new
644 * config/i386/i386v42mp.mh: new
645 * config/i386/tm-i386v42mp.h: new
646 * config/i386/nm-i386v42mp.h: new
647 * configure.tgt: added new entries
648 * configure.host: added new entries
651 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
653 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
655 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
656 to GDBTK_LIBRARY, which is now a path to search.
657 (gdb_path_conv): New function. Convert Cygwin32 pathname to
660 * {aclocal.m4,configure.in}: Changes for Windows builds.
662 * configure: Rebuilt.
665 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
667 * dsrec.c (load_srec): Print leading zeroes when printing section
670 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
672 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
674 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
676 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
678 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
679 vprintf_filtered, evprintf_filtered): Callbacks that accept
682 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
684 * breakpoint.c (insert_breakpoints, watchpoint_check,
685 bpstat_stop_status): Do not disable watchpoints going out of scope.
686 (insert_breakpoints): Make sure that the current frame is valid
687 before calling find_frame_addr_in_frame_chain.
689 * top.c (setup_user_args): Handle quotes and backslashes.
690 (print_gdb_version): Update copyright year.
692 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
694 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
697 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
699 * configure: Regenerated.
700 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
703 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
705 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
707 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
708 except under wingdb. (Contributed by Martin Hunt).
710 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
712 * configure: Regenerated.
713 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
715 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
717 * remote-sim.h (sim_state, SIM_DESC): New types.
718 (sim_open): Return a `descriptor' as result.
719 (*): New argument of descriptor result from sim_open.
720 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
721 (gdbsim_open): Record result of sim_open in gdbsim_desc.
722 Pass argv list to sim_open, argv[0] = pseudo program name.
723 (*): Pass gdbsim_desc to sim_foo fns.
725 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
727 * config.in: Regenerated.
729 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
730 HAVE_HPUX_THREAD_SUPPORT): Define.
733 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
735 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
738 * configure: Regenerated.
739 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
743 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
745 First cut at supporting simulators in gdbserver:
747 * configure, configure.in: Allow gdbserver to be configured
748 for cross-target environments.
749 * gdbserver/Makefile.in: Add simulator support.
750 * gdbserver/configure.in: Eliminate assumption that host == target.
751 Simplify using gdb/configure.tgt and gdb/configure.host.
752 Fix other minor configuration errors.
753 * gdbserver/low-sparc.c: Fix compile error.
754 * gdbserver/remote-utils.c: Eliminate assumption that registers
755 and addresses are four bytes. Fix minor compile errors and warnings.
756 * gdbserver/server.c: Rewrite numerous instances of identical code
757 for starting inferior processes to call new function start_inferior.
758 Eliminate assumption that registers and addresses are four bytes.
759 * gdbserver/server.h: Add missing prototypes to eliminate compiler
761 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
762 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
763 * config/i386/linux.mh: Eliminate gdbserver support as a first step
764 in moving such support from host to target makefile fragments.
765 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
767 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
769 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
770 to insure consistant initialization of unused fields to zero.
771 * symtab.c: replace initializations of sals with new macro INIT_SAL.
772 * breakpoint.c: ditto.
775 * source.c: add call to INIT_SAL macro.
777 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
779 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
780 they might get used on 32 bit targets as well.
782 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
784 * remote-mips.c (mips_exit_debug): Some IDT boards don't
785 send the full exit string.
787 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
789 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
791 (mn10200_store_struct_return): Likewise.
793 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
795 * mips-tdep.c (mips_fetch_instruction): New function; replace
796 common code throughout with calls to it.
797 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
798 correct saved addresses of $s0 and $s1.
799 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
800 instead of hardcoded 4.
801 (mips16_skip_prologue): Handle extended instructions correctly.
803 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
805 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
806 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
808 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
810 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
811 New macros for testing, setting, and clearing bit 0 of addresses.
812 Change numerous bits of code where bit 0 was being manipulated
815 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
817 * remote-mips.c: Put back the form feeds.
819 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
821 * remote-mips.c: Remove form feeds (^L) from source.
822 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
823 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
824 PMON after a continue; it causes target program misbehavior.
825 (mips_fetch_register): Don't fetch unsupported registers; this
826 cuts down on wasted serial traffic.
828 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
830 * configure.in configure (HPUX/OSF thread support): Enable this
831 only when running GCC, since HP's thread header files use ANSI C
832 which is not supported by their default compiler.
834 * configure.host (i[3456]86-*-windows): Disable long long
835 support for WinGDB. Add mswin to configdirs.
836 * configure.in configure: Move calls to configure.host and
837 configure.tgt to the top of configure.in to allow them to set
838 config variables before they are referenced.
840 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
842 * configure.tgt (mips*-*-lnews*): New target.
844 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
846 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
847 if we're not the innermost frame. Fix minor typos.
849 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
851 * stabsread.c (read_type): Fix handling of template names
852 with template parameters containing `::'.
854 * valops.c (search_struct_field, search_struct_method):
855 Pass correct valaddr parameter to baseclass_offset.
856 Prevent gdb crashes by making sure that the virtual base pointer
857 from an user object still points to accessible memory.
859 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
861 * maint.c: Eliminate -Wall warnings by including some header files.
863 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
865 * remote-sim.c (init_callbacks): Undo previous change.
867 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
869 * maint.c: Fix dereference of pointer.
870 * remote-sim.c: Fix reference of structure member "last_error".
871 * debugify.c: Include config.h to get ANSI definitions.
873 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
875 * remote-vx.c (vx_attach): Remove code added by kung. It made no
878 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
880 * main.c (print_gdb_help): Make static to match declaration.
882 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
884 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
886 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
888 * debugify.c, debugify.h: Make safe for non-ansi compilers.
890 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
892 * defs.h: Fix prototypes for new cleanup functions.
894 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
896 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
897 comment, add PARAMS, add license info and fix indentation.
899 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
901 * debugify.c, debugify.h: New files. Provide common macros
902 for writing debug info to a log file or stdio.
904 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
906 * c-valprint.c (c_val_print): Fix printing for arrays defined
909 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
911 * defs.h: Fix cntl-C to read from the Windows message queue.
912 Add prototypes for make_final_cleanup (and the other cleanup
914 * remote-e7000.c: Fix sync code to timeout if unable to sync.
915 Change sync code to report status while trying to sync-up
916 with hardware. Add debugging output and document.
917 * ser-e7kpc.c: Swap order of len & offset to match implementation.
918 Add debugging output and document.
919 * serial.c: Add debugging output.
920 * top.c: Add call to do_final_cleanups.
921 Remove conditionals preventing Win32 from getting SIGQUIT.
922 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
923 chain as a parameter. Extract this generic code from the cleanup
924 routines into separate funtions (*_my_cleanup). Keep old
925 functionality by passing "cleanup_chain" to the new funtions.
926 Define the cleanup chain "final_cleanup_chain" to be a cleanup
927 chain which will be executed only when gdb exits. Add functions
928 (*_final_cleanup) to match the original (*_cleanup) functions.
929 (pollquit, quit, notice_quit): Fix to read cntl-C from the
930 Windows message queue.
932 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
934 * m32r-rom.c: #include <sys/types.h>.
935 #ifdef out new load support if wingdb.
936 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
938 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
941 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
942 * mn10200-tdep.c (mn10200_store_struct_return): New function.
944 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
945 extracting a return value from a register pair.
947 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
948 be two byte aligned. Round argument sizes up to two byte boundary.
949 Write out args in two byte hunks.
950 (mn10200_push_return_address): Implement.
951 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
952 structures > 8 bytes (temporary).
953 (STORE_RETURN_VALUE): Likewise.
954 (CALL_DUMMY): No longer undefine.
955 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
956 (REG_STRUCT_HAS_ADDR): Define.
959 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
961 * configure.tgt: added r5900.
964 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
966 * mips-tdep.c (non_heuristic_proc_desc): New function.
967 (find_proc_desc): Move non-heuristic proc search code into separate
969 (gdb_print_insn_mips): Use non-heuristic method to find procedure
970 descriptor, to avoid prologue examination when disassembling.
971 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
972 aka MicroMeteor board).
973 (mips_exit_debug): Prevent protocol reinitialization if an error
974 occurs while exiting debug mode.
976 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
978 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
979 comments, formatting, etc. Plus other minor fixes for problems
980 I found during my first pass over the mn10200 port.
981 (mn10200_analyze_prologue): New function.
982 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
983 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
984 comments, formatting, etc. Minor fixes for problems I found during
985 my first pass over the mn10200 port.
986 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
988 (REGISTER_VIRTUAL_TYPE): Define as a long.
989 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
991 (STORE_RETURN_VALUE): Similarly.
993 * blockframe.c (generic_get_saved_regs): Remove unused variable
995 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
996 inside #ifdef CALL_DUMMY.
997 (watch_command_1): Initialize target_resources_ok.
998 * command.c (do_setshow_command): Provide dummy initialization
1000 * valops.c (find_function_addr): Move function & prototype inside
1002 (value_arg_coerce): Similarly.
1003 (value_of_variable): Provide dummy initialization of "frame".
1005 start-sanitize-gdbtk
1006 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
1008 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
1011 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
1013 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
1014 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
1016 (scan_xcoff_symtab): Ditto.
1018 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
1020 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
1021 from being sent to 32-bit targets by masking off upper bits.
1022 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
1023 of PC on 32-bit targets.
1024 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
1025 frame setup instruction.
1026 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
1027 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
1028 prologue instruction. Fix warnings and bugs found by gcc -Wall.
1029 * buildsym.c (finish_block): Improve handling of overlapping blocks;
1030 fixes problem on MIPS16 printing function arguments.
1032 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1034 * dwarf2read.c (dwarf2_linkage_name): New function to get
1035 the linkage name of a die from DW_AT_MIPS_linkage_name or
1037 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
1038 new_symbol): Use it instead of accessing DW_AT_name.
1039 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
1040 partial die if present.
1041 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
1043 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
1045 * blockframe.c (generic_frame_chain_valid): If the new frame
1046 is not INNER_THAN the old frame, then it's not valid.
1048 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
1050 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
1051 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
1053 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
1055 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
1056 sd and sw instructions correctly.
1057 (heuristic_proc_start): Add support for MIPS16.
1058 (mips16_get_imm, mips16_heuristic_proc_desc,
1059 mips32_heuristic_proc_desc): New helper functions for
1060 heuristic_proc_desc.
1061 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
1062 (mips_push_arguments): Don't align small arguments in EABI.
1063 (mips32_skip_prologue): Attempt to shrink code size a little.
1065 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1067 * m32r-stub.c: New -- remote protocol support for M32R cpu.
1068 * m32r-rom.c: Several experiments with improved download time.
1070 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
1072 * mips-tdep.c (MIPS16_INSTLEN): Define.
1073 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
1074 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
1075 of function on MIPS16.
1076 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
1077 for mips_skip_prologue.
1078 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
1080 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1082 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
1083 ../sim/common/libcommon.a.
1085 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1087 * blockframe.c: fix a null pointer ref in generic_get_saved_register
1089 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
1091 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
1094 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
1096 First set of changes for mips16:
1097 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
1098 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
1099 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
1100 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
1101 * mem-break.c (memory_breakpoint_from_pc): New function.
1102 (memory_insert_breakpoint, memory_remove_breakpoint): Use
1103 memory_breakpoint_from_pc to determine breakpoint contents and size.
1104 * target.h (memory_breakpoint_from_pc): Declare.
1105 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
1106 to determine size of breakpoint instruction.
1107 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
1108 New helper functions for mips_find_saved_regs.
1109 (mips_find_saved_regs): Recognize mips16 prologues.
1110 (mips_addr_bits_remove): Strip off upper 32 bits of address
1111 when target CPU is 32 bits but CORE_ADDR is 64 bits.
1112 (mips_step_skips_delay): No branch delay slot on mips16.
1113 (gdb_print_insn_mips): Disassemble mips16 code.
1114 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
1116 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
1118 * tm-mn10200.h (NUM_REGS): Decrease to 12.
1119 (REGISTER_NAMES): Elimination registers not found on the mn10200.
1120 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
1121 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
1123 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1125 * dwarf2read.c: Replace integral tag, name and form fields in
1126 internal structure definitions with the corresponding enumeration
1127 types from dwarf2.h. Add default cases to switches on enumerations
1129 Make quoting of string arguments in complaint messages consistent.
1130 Check for NULL returns from DW_STRING.
1131 (struct partial_die_info): Add sibling and has_type fields, remove
1133 (DW_*): Move access macro definitions near the definition of the
1134 attribute structure.
1135 (struct field_info): New structure to pass information about fields
1136 and member functions between die processing routines.
1137 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
1138 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
1139 the partial symbol table if the DW_AT_*_pc attributes are missing.
1140 Add file scope base type definitions to the partial symbol table.
1141 Skip over child dies if the die has a sibling attribute.
1142 (add_partial_symbol): Enter global variables with type attributes
1143 and without location descriptors into the partial symbol table.
1144 Store value of DW_TAG_variable dies in the partial symbol table.
1145 Do not enter global variables into the minimal symbol table.
1146 Add base type definitions to the partial symbol table.
1147 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
1148 (process_die): Move check for DW_AT_low_pc to read_func_scope.
1149 Add a typedef symbol for base type definitions to the symbol table.
1150 Ignore DW_TAG_inlined_subroutine tags for now.
1151 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
1152 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
1153 to determine pc bounds, ignore dies with invalid bounds.
1154 (dwarf2_get_pc_bounds): New routine to extract and validate the
1155 DW_AT_*_pc attributes of a die.
1156 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
1157 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
1158 New functions to handle fields and member functions.
1159 (read_structure_scope): Rewritten to use them.
1160 (read_array_type): Renamed from dwarf_read_array_type.
1161 Default upper array bound to describe an array with unspecified
1163 Create array types in backwards order, as dwarf2 puts out the array
1164 dimensions from left to right.
1165 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
1166 DW_AT_artificial and DW_AT_prototyped.
1167 (read_base_type): Make an unsigned type for DW_ATE_boolean.
1168 Pass objfile to dwarf_base_type.
1169 (read_partial_die): Use read_attribute to read in the attributes.
1170 Handle DW_AT_sibling and DW_AT_type.
1171 Follow references when determining DW_AT_name and DW_AT_external
1172 attributes of the die.
1173 Validate DW_AT_*_pc attributes.
1174 (read_full_die): Use read_attribute to read in the attributes.
1175 (read_attribute): New function to read an attribute described
1176 by an abbreviated attribute.
1177 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
1178 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
1179 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
1180 Change symbol class for global variables with a zero valued location
1181 descriptor to LOC_UNRESOLVED.
1182 Handle DW_AT_const_value attributes for DW_TAG_variable,
1183 DW_TAG_formal_parameter and DW_TAG_enumerator.
1184 Build a typedef symbol for DW_TAG_base_type.
1185 (dwarf2_const_value): New routine to copy a constant value from an
1186 attribute to a symbol.
1187 (dwarf_base_type): Use passed in objfile, not current_objfile
1188 when calling dwarf2_fundamental_type.
1189 (dump_die): Use DW_* accessor macros to access values of attributes.
1190 (decode_locdesc): Handle DW_OP_plus_uconst.
1192 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
1194 * mn10200-tdep.c: New file.
1195 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
1196 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
1197 * config/mn10200/mn10200.mt: New file.
1198 * configure.tgt: add mn10200 entry.
1200 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
1202 * configure.in configure: Check if host has libdl if doing
1205 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
1207 * mn10300-tdep.c: Wrote/fixed implementations of
1208 mn10300_frame_chain, mn10300_init_extra_frame_info,
1209 mn10300_frame_saved_pc
1210 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
1211 and INIT_FRAME_PC macros.
1213 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
1215 * configure.in configure: Check if host has libm. Make sure we
1216 are using gcc when using the -export-dynamic option. Fixes a
1217 problem with building under Solaris/SunPro cc.
1219 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
1221 * config/mips/{embed,embed64,embedl,embedl64}.mt:
1222 Link in simulator on MIPS embedded targets.
1224 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1226 * blockframe.c (frameless_look_for_prologue): Mark frames
1227 with a zero PC as frameless to improve backtraces from core dumps
1228 caused by dereferencing a NULL function pointer.
1230 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
1232 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
1234 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
1236 * mn10300-tdep.c: made a lot more generic, ripping out code
1237 from copied target (no more mn10300_scan_prologue,
1238 init_extra_frame_info, and mn10300_fix_call_dummy calls)
1239 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
1240 and INIT_FRAME_PC macros
1242 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1244 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
1245 FP_REGISTER_BYTES to compute offsets into the saved frame,
1246 since it fails for SPARC targets configured without any
1247 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
1249 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
1251 * symtab.c (fixup_symbol_section): Handle NULL symbols without
1254 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
1256 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
1257 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
1259 * configure configure.in: Clean up test cases around thread support.
1261 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
1264 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
1265 printcmd.c valops.c value.h values.c: Add bfd_section arg to
1266 value_at and value_at_lazy.
1267 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
1268 Add bfd_section arg to prim_record_minimal_symbol_and_info.
1269 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
1270 instead of read_memory. It takes a bfd_section arg.
1271 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
1272 unnecessary cast for assignment of struct dbx_symfile_info.
1273 Struct objfile now uses a real pointer instead of PTR for this
1275 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
1276 text, data and bss into dbx_symfile_info.
1277 * exec.c (xfer_memory): Handle transfers for user-specified
1279 * findvar.c (read_var_value locate_var_value): Copy bfd section
1280 from the symbol to the value.
1281 * gdb-stabs.h: Add section pointers for text, data and bss
1283 * maint.c (translate address command): Add test code for overlay
1284 address translation.
1285 * printcmd.c (do_examine do_one_display): Now takes a bfd section
1287 * (print_formatted x_command): Record current section along with
1288 current address for repeated commands.
1289 * sparc-nat.c (fetch_inferior_registers): Change
1290 target_xfer_memory to target_{read write}_memory to allow changes
1291 to target_xfer_memory interface for section info.
1292 * symmisc.c (dump_msymbols print_symbol): Print section
1293 assocaited with symbol.
1294 * symtab.c (fixup_symbol_section): New routine to
1295 add section info to symbols returned by lookup_symbol.
1296 * symtab.h (struct general_symbol_info): Add bfd section to
1298 * target.c target.h (target_xfer_memory): Add bfd section to
1300 * (target_read_memory_section): New routine to read data from a
1302 * (target_memory_bfd_section): New global variable to pass bfd
1303 section in to targets.
1304 * valarith.c (value_add value_addr value_array): Preserve bfd
1305 section when computing new value.
1306 * value.h (struct value): Add bfd section to values.
1307 * values.c (allocate_value value_copy): Initialize/preserve bfd
1309 * (unpack_double): Clean up _MSC_VER conditionals to remove
1312 * v850ice.c: New module to support communication with NEC's
1314 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
1315 ep names with rxx names. sp and fp are renamed via a different
1319 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
1321 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
1322 also removed code elsewhere that made use of RP_REGNUM.
1323 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
1324 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
1325 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
1326 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
1328 For older changes see ChangeLog-96
1334 version-control: never