gdb: Allow struct fields named double

[deliverable/binutils-gdb.git] / gdb / ChangeLog

2018-12-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * c-exp.y (field_name): Allow DOUBLE_KEYWORD, INT_KEYWORD, LONG,
        SHORT, SIGNED_KEYWORD, and UNSIGNED tokens to act as a field
        names.
        (typename_stoken): New function.

2018-12-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * c-exp.y (field_name): New %token, and new rule.
        (exp): Replace uses of 'name' with 'field_name' where appropriate.

2018-12-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/13368
        * c-exp.y (typebase): Extend the comment.
        (ident_tokens): Likewise.

2018-12-18  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (dwarf2_find_containing_comp_unit): Don't take
        address of sect_off.

2018-12-23  Joel Brobecker  <brobecker@adacore.com>

        GDB 8.2.1 released.

2018-12-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_call_arg_struct): Don't adjust size before
        assigning locations.
        (riscv_return_value): Take more care not to read/write outside of
        argument buffer.  Cast return value between the declared type and
        the abi type.

2018-12-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_register_reggroup_p): Save and restore fcsr,
        fflags, and frm registers.

2018-12-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_dwarf_reg_to_regnum): New function.
        (riscv_gdbarch_init): Register new function with gdbarch.
        * riscv-tdep.h: New enum to define RISC-V DWARF register numbers.

2018-12-21  Simon Marchi  <simon.marchi@ericsson.com>

        * minsyms.c (mst_str): New.
        (minimal_symbol_reader::record_full): Add debug output.

2018-12-21  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_handle_debug_trap): Require pl.pl_flags to
        equal PL_FLAG_SI.
        (fbsd_nat_target::stopped_by_sw_breakpoint): Likewise.

2018-12-21  Paul Marechal  <paul.marechal@ericsson.com>

        PR gdb/23974
        * target.c (target_read_stralloc): Check for empty vector.

2018-12-21  Дилян Палаузов  <dilyan.palauzov@aegee.org>

        * top.c (print_gdb_configuration): Print "--without-python"
        if GDB was configured without Python.

2018-12-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_scan_prologue): Use plongest to format
        a signed offset as a string.

2018-12-21  Dave Murphy  <davem@devkitpro.org>

        * dtrace-probe.c (dtrace_static_probe_ops): Explicit zero
        initialise.
        * probe.c (any_static_probe_ops): Ditto.
        * record-btrace.c (record_btrace_thread_observer_token): Ditto.
        * stap-probe.c (stap_static_probe_ops): Ditto.
        * tui/tui-hooks.c (tui_observers_token): Ditto.
        * unittests/observable-selftests.c (token1, token2, token3): Ditto.

2018-12-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb/dummy-frame.c (default_dummy_id): Defined new function.
        * gdb/dummy-frame.h (default_dummy_id): Declare new function.
        * gdb/frame-unwind.c (default_unwind_pc): Define new function.
        (default_unwind_sp): Define new function.
        * gdb/frame-unwind.h (default_unwind_pc): Declare new function.
        (default_unwind_sp): Declare new function.
        * gdb/frame.c (frame_unwind_pc): Assume gdbarch_unwind_pc is
        available.
        (get_frame_sp): Assume that gdbarch_unwind_sp is available.
        * gdb/gdbarch.c: Regenerate.
        * gdb/gdbarch.h: Regenerate.
        * gdb/gdbarch.sh: Update definition of dummy_id, unwind_pc, and
        unwind_sp.  Add additional header files to be included in
        generated file.

2018-12-19  Dimitar Dimitrov  <dimitar@dinux.eu>

        * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Remove
        sp clobbers.

2018-12-17  Andrew Burgess  <andrew.burgess@embecosm.com>

        * dwarf2read.c (struct dwarf2_cu): Convert the fields 'mark',
        'has_loclist', 'checked_producer', 'producer_is_gxx_lt_4_6',
        'producer_is_gcc_lt_4_3', 'producer_is_icc_lt_14',
        'processing_has_namespace_info' from unsigned int to bool.  Update
        comments.
        (producer_is_icc_lt_14): Update return type.
        (producer_is_gcc_lt_4_3): Likewise.
        (producer_is_gxx_lt_4_6): Likewise.
        (process_die): Write true instead of 1 into predicate fields.
        (dwarf2_start_symtab): Likewise.
        (var_decode_location): Likewise.
        (dwarf2_mark_helper): Likewise.
        (dwarf2_mark): Likewise.
        (dwarf2_clear_marks): Write false instead of 0 into predicate
        field.
        (dwarf2_cu::dwarf2_cu): Initialise predicate fields to false, not
        0.

2018-12-17  Szabolcs Nagy  <szabolcs.nagy@arm.com>

        * nat/aarch64-sve-linux-ptrace.h: Include signal.h instead of
        asm/sigcontext.h.

2018-12-17  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * nat/linux-ptrace.c (kill_child): Fix ARI warning by removing
        warning trailing new line.

2018-12-16  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * nat/linux-ptrace.c (kill_child): New function.
        (linux_ptrace_test_ret_to_nx): Use kill_child instead of local code.
        Add a call to kill_child in case of early return after fork.
        (linux_check_ptrace_features): Use kill_child instead of local code.
        (linux_test_for_tracefork): Likewise.

2018-12-14  Tom Tromey  <tom@tromey.com>

        * Makefile.in: Remove "alloca" comment.
        (INFOFILES): Remove.
        (local-maintainer-clean): Don't use INFOFILES.

2018-12-13  John Baldwin  <jhb@FreeBSD.org>

        * syscalls/update-freebsd.sh: New file.
        * syscalls/freebsd.xml: Regenerate.

2018-12-13  John Baldwin  <jhb@FreeBSD.org>

        * NEWS: Add entry documenting system call aliases.
        * break-catch-syscall.c (catch_syscall_split_args): Pass 'result'
        to get_syscalls_by_name.
        * gdbarch.sh (UNKNOWN_SYSCALL): Remove.
        * gdbarch.h: Regenerate.
        * syscalls/gdb-syscalls.dtd (syscall): Add alias attribute.
        * xml-syscall.c [!HAVE_LIBEXPAT] (get_syscalls_by_name): Rename
        from get_syscall_by_name.  Now accepts a pointer to a vector of
        integers and returns a bool.
        [HAVE_LIBEXPAT] (struct syscall_desc): Add alias member.
        (syscall_create_syscall_desc): Add alias parameter and pass it to
        syscall_desc constructor.
        (syscall_start_syscall): Handle alias attribute.
        (syscall_attr): Add alias attribute.
        (xml_get_syscalls_by_name): Rename from xml_get_syscall_number.
        Now accepts a pointer to a vector of integers and returns a
        bool.  Add syscalls whose alias or name matches the requested
        name.
        (get_syscalls_by_name): Rename from get_syscall_by_name.  Now
        accepts a pointer to a vector of integers and returns a bool.
        * xml-syscall.h (get_syscalls_by_name): Likewise.

2018-12-13  John Baldwin  <jhb@FreeBSD.org>

        * break-catch-syscall.c (catch_syscall_split_args): Pass 'result'
        to get_syscalls_by_group.
        * xml-syscall.c [!HAVE_LIBEXPAT] (get_syscalls_by_group): Return
        false.
        [HAVE_LIBEXPAT] (xml_list_syscalls_by_group): Append syscall
        numbers to an existing vector of integers and return a bool.
        (get_syscalls_by_group): Accept pointer to vector of integers
        and change return type to bool.
        * xml-syscall.h (get_syscalls_by_group): Likewise.

2018-12-13  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (riscv_print_one_register_info): For MSTATUS, add
        comment for SD field, and correct xlen calculation.  For MISA, add
        comment for MXL field, add call to register_size, and correct base
        calculation.

2018-12-13  Stafford Horne  <shorne@gmail.com>

        * NEWS(New targets): Add or1k*-*-linux*.

2018-12-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * nat/linux-osdata.c (linux_xfer_osdata_info_os_types): Forward
        declare on one line to fix ARI warning.

2018-12-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * infrun.c (infcall_suspend_state::infcall_suspend_state): New.
        (infcall_suspend_state::registers): New.
        (infcall_suspend_state::restore): New.
        (infcall_suspend_state::thread_suspend): Rename to...
        (infcall_suspend_state::m_thread_suspend): ...this.
        (infcall_suspend_state::registers): Rename to...
        (infcall_suspend_state::m_registers): ...this.
        (infcall_suspend_state::siginfo_gdbarch): Rename to...
        (infcall_suspend_state::m_siginfo_gdbarch): ...this.
        (infcall_suspend_state::siginfo_data): Rename to...
        (infcall_suspend_state::m_siginfo_data): ...this.
        (save_infcall_suspend_state): Rewrite to use infcall_suspend_state
        constructor.
        (restore_infcall_suspend_state): Rewrite to use
        infcall_suspend_state::restore method.
        (get_infcall_suspend_state_regcache): Use
        infcall_suspend_state::registers method.

2018-12-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_call_arg_scalar_float): Unnamed (variadic)
        arguments are passed in integer registers.
        (riscv_call_arg_complex_float): Likewise.

2018-12-11  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * nat/linux-osdata.c (common_getter): New function.
        (struct osdata_type): Change getter to take_snapshot.
        Add LONGEST len_avail and struct buffer buffer.
        Change all elements in the initializer.
        Add an element for the list of types.
        (linux_xfer_osdata_info_os_types): New function.
        (linux_common_xfer_osdata): Use common_getter for the list of types.
        Replace getter call by common_getter.
        (linux_xfer_osdata_cpus): Remove args READBUF, OFFSET, LEN.
        Add arg BUFFER.  Only keep the code that adds data in BUFFER.
        (linux_xfer_osdata_fds): Likewise.
        (linux_xfer_osdata_modules): Likewise.
        (linux_xfer_osdata_msg): Likewise.
        (linux_xfer_osdata_processes): Likewise.
        (linux_xfer_osdata_processgroups): Likewise.
        (linux_xfer_osdata_sem): Likewise.
        (linux_xfer_osdata_shm): Likewise.
        (linux_xfer_osdata_isockets): Likewise.
        (linux_xfer_osdata_threads): Likewise.

2018-12-11  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * nat/linux-osdata.c: Removed various trailing spaces.

2018-12-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_register_name): Fix ARI warning by removing
        leading whitespace before #include line.

2018-12-08  Simon Marchi  <simon.marchi@ericsson.com>
            Дилян Палаузов  <dilyan.palauzov@aegee.org>

        PR gdb/23950
        * configure.ac: Search for tgetent in libtinfow.
        * configure: Re-generate.

2018-12-08  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * linux-thread-db.c (struct thread_db_info): Add td_ta_delete_p.
        (thread_db_err_str): Forward declare.
        (delete_thread_db_info): Call td_ta_delete_p if available.
        (try_thread_db_load_1): Acquire td_ta_delete address.
        * nat/gdb_thread_db.h (td_ta_delete_ftype): Declare.

2018-12-08  Pedro Alves  <palves@redhat.com>

        * source.c (forward_search_command): Rename to ...
        (search_command_helper): ... this.  Add 'forward' parameter.
        Tweak to use a gdb::def_vector<char> instead of a xrealloc'ed
        buffer.  Handle backward searches too.
        (forward_search_command, reverse_search_command): Reimplement by
        calling search_command_helper.

2018-12-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * .dir-locals.el: Copy most of the settings from c-mode over to
        c++-mode.

2018-12-08  Stafford Horne  <shorne@gmail.com>

        * Makefile.in (ALL_TARGET_OBS): Add or1k-linux-tdep.o.
        * configure.tgt: Add or1k*-*-linux*.
        * or1k-linux-tdep.c: New file.
        * or1k-tdep.c (or1k_gdbarch_init): Call gdbarch_init_osabi.

2018-12-07  Pedro Alves  <palves@redhat.com>

        * dwarf2read.c (get_gdb_index_contents_from_section): Use
        gdb::make_array_view.

2018-12-05  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * language.c (_initialize_language): Fix leak by assigning
        a static string to language.  Same for range and case_sensitive,
        even if no leak is detected for these variables.

2018-12-05  John Baldwin  <jhb@FreeBSD.org>

        * configure: Re-generate.
        * configure.ac: Use separate sed expressions to escape variables
        in auto-load directories.

2018-12-05  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_features_from_gdbarch_info): New function.
        (riscv_find_default_target_description): Use new function to
        extract feature from gdbarch_info.
        (riscv_gdbarch_init): Add error checks for xlen and flen between
        target description and bfd headers.  Be smarter about when we
        think the hardware floating point abi should be used.

2018-12-05  Alan Hayward  <alan.hayward@arm.com>

        * nat/aarch64-linux-hw-point.c
        (aarch64_linux_any_set_debug_regs_state): New function.
        * nat/aarch64-linux-hw-point.h
        (aarch64_linux_any_set_debug_regs_state): New declaration.
        * nat/aarch64-linux.c (aarch64_linux_new_thread): Check if any
        BPs or WPs are set.

2018-11-30  John Baldwin  <jhb@FreeBSD.org>

        * common/filestuff.c [HAVE_KINFO_GETFILE]: Include headers.
        (fdwalk) [HAVE_KINFO_GETFILE]: Use kinfo_getfile.

2018-11-30  Philippe Waroquiers  <philippe.waroquiers@skynet.be>
            Simon Marchi  <simon.marchi@ericsson.com>

        * linespec.c (symtab_vector_up): Remove.
        (symtabs_from_filename): Change return type to std::vector.
        (collect_symtabs_from_filename): Likewise.
        (create_sals_line_offset): Assign return value of
        collect_symtabs_from_filename to *ls->file_symtabs.
        (convert_explicit_location_to_linespec): Remove call to release.
        (parse_linespec): Likewise.
        (symtab_collector) <symtab_collector>: Remove initialization of
        m_symtabs.
        <release_symtabs>: Change return type to std::vector<symtab *>.
        <operator ()>: Adjust.

2018-11-30  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c [__FreeBSD_version >= 700009] (USE_SIGINFO): Macro
        defined.
        (union sigval32, struct siginfo32, fbsd_siginfo_size)
        (fbsd_convert_siginfo): Make conditional on USE_SIGINFO instead
        of KERN_PROC_AUXV and PT_LWPINFO.
        (fbsd_nat_target::xfer_partial): Define method unconditionally.
        Make TARGET_OBJECT_SIGNAL_INFO conditional on USE_SIGINFO.
        Make TARGET_OBJECT_AUXV conditional on KERN_PROC_AUXV.
        Make TARGET_OBJECT_FREEBSD_VMMAP and
        TARGET_OBJECT_FREEBSD_PS_STRINGS conditional on KERN_PROC_VMMAP
        and KERN_PROC_PS_STRINGS.
        * fbsd-nat.h: Include <sys/proc.h>.
        (fbsd_nat_target::xfer_partial): Declare method unconditionally.

2018-11-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-linux-nat.c: Add 'inferior.h' and 'target-descriptions.h'
        header files.
        (riscv_linux_nat_target::read_description): New method.

2018-11-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * arch/riscv.h (riscv_gdbarch_features::hash): New method.
        * arch/riscv.c (struct riscv_gdbarch_features_hasher): New.
        (riscv_tdesc_cache): New global.
        (riscv_create_target_description): Look in the cache before
        creating a new target description.

2018-11-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * arch/riscv.h (riscv_gdb_features::operator==): New.
        (riscv_gdb_features::operator!=): New.
        * riscv-tdep.c (riscv_gdbarch_init): Make use of the inequality
        operator.

2018-11-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * arch/riscv.h (riscv_create_target_description): Make return type
        const.
        * arch/riscv.c (riscv_create_target_description): Likewise.
        * riscv-tdep.c (riscv_find_default_target_description): Likewise.

2018-11-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Keith Seitz  <keiths@redhat.com>
            Tom Tromey  <tom@tromey.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>

        https://bugzilla.redhat.com/show_bug.cgi?id=1613614
        * dwarf2read.c (dwarf2_find_containing_comp_unit): Add
        'mid_cu->length' to '*cu_off' when checking if 'sect_off' is
        inside the CU.

2018-11-30  Pedro Alves  <palves@redhat.com>

        * aix-thread.c (aix_thread_target) <aix_thread_target>: Delete.
        <stratum>: New override.
        * bfd-target.c (aix_thread_target) <aix_thread_target>: Delete.
        <stratum>: New override.
        * bsd-uthread.c (bsd_uthread_target) <bsd_uthread_target>: Delete.
        <stratum>: New override.
        * exec.c (exec_target) <exec_target>: Delete.
        <stratum>: New override.
        * gdbarch-selftests.c (register_to_value_test): Adjust to use the
        stratum method instead of the to_stratum field.
        * linux-thread-db.c (thread_db_target) <thread_db_target>: Delete.
        <stratum>: New override.
        (thread_db_target::thread_db_target): Delete.
        * make-target-delegates (print_class): Don't print a ctor
        declaration.  Print a stratum method override declaration.
        * process-stratum-target.h (process_stratum_target)
        <process_stratum_target>: Delete.
        <stratum>: New override.
        * ravenscar-thread.c (ravenscar_thread_target)
        <ravenscar_thread_target>: Delete.
        <stratum>: New override.
        * record-btrace.c (record_btrace_target)
        <record_btrace_target>: Delete.
        <stratum>: New override.
        * record-full.c (record_full_base_target)
        <record_full_base_target>: Delete.
        <stratum>: New override.
        * record.c (record_disconnect, record_detach)
        (record_mourn_inferior, record_kill): Adjust to use the stratum
        method instead of the to_stratum field.
        * regcache.c (cooked_read_test, cooked_write_test): Likewise.
        * sol-thread.c (sol_thread_target)
        <sol_thread_target>: Delete.
        <stratum>: New override.
        * spu-multiarch.c (spu_multiarch_target)
        <spu_multiarch_target>: Delete.
        <stratum>: New override.
        * target-delegates.c: Regenerate.
        * target.c (target_stack::push, target_stack::unpush)
        (pop_all_targets_above, pop_all_targets_at_and_above)
        (info_target_command, target_require_runnable)
        (target_stack::find_beneath): Adjust to use the stratum method
        instead of the to_stratum field.
        (dummy_target::dummy_target): Delete.
        (dummy_target::stratum): New.
        (debug_target::debug_target): Delete.
        (debug_target::stratum): New.
        (maintenance_print_target_stack): Adjust to use the stratum method
        instead of the to_stratum field.
        * target.h (struct target_ops) <stratum>: New method.
        <to_stratum>: Delete.
        <is_pushed>: Adjust to use the stratum method
        instead of the to_stratum field.

2018-11-30  Pedro Alves  <palves@redhat.com>

        * corelow.c (core_target) <has_all_memory, has_execution>: New
        overrides.
        * inf-child.c (inf_child_target::has_all_memory)
        (inf_child_target::has_memory, inf_child_target::has_stack)
        (inf_child_target::has_registers)
        (inf_child_target::has_execution): Delete.
        * inf-child.h (inf_child_target) <has_all_memory, has_memory,
        has_stack, has_registers, has_execution>: Delete.
        * process-stratum-target.c
        (process_stratum_target::has_all_memory)
        (process_stratum_target::has_memory)
        (process_stratum_target::has_stack)
        (process_stratum_target::has_registers)
        (process_stratum_target::has_execution): New.
        * process-stratum-target.h (process_stratum_target)
        <has_all_memory, has_memory, has_stack, has_registers,
        has_execution>: New method overrides.
        * ravenscar-thread.c (ravenscar_thread_target) <has_all_memory,
        has_memory, has_stack, has_registers, has_execution>: Delete.
        * remote-sim.c (gdbsim_target) <has_stack, has_registers,
        has_execution>: Delete.
        * remote.c (remote_target) <has_all_memory, has_memory, has_stack,
        has_registers, has_execution>: Delete.
        * target.c (default_child_has_all_memory)
        (default_child_has_memory, default_child_has_stack)
        (default_child_has_registers, default_child_has_execution):
        Delete.
        * target.h (default_child_has_all_memory)
        (default_child_has_memory, default_child_has_stack)
        (default_child_has_registers, default_child_has_execution):
        Delete.
        * tracefile.h (tracefile_target) <has_execution>: New override.

2018-11-30  Pedro Alves  <palves@redhat.com>

        * Makefile.in (COMMON_SFILES): Add process-stratum-target.c.
        * bsd-kvm.c: Include "process-stratum-target.h".
        (bsd_kvm_target): Now inherits from process_stratum_target.
        (bsd_kvm_target::bsd_kvm_target): Default it.
        * corelow.c: Include "process-stratum-target.h".
        (core_target): Now inherits from process_stratum_target.
        (core_target::core_target): Don't set to_stratum here.
        * inf-child.c (inf_child_target::inf_child_target): Delete.
        * inf-child.h: Include "process-stratum-target.h".
        (inf_child_target): Inherit from process_stratum_target.
        (inf_child_target) <inf_child_target>: Default it.
        <can_async_p, supports_non_stop, supports_disable_randomization>:
        Delete overrides.
        * process-stratum-target.c: New file.
        * process-stratum-target.h: New file.
        * remote-sim.c: Include "process-stratum-target.h".
        (gdbsim_target): Inherit from process_stratum_target.
        <gdbsim_target>: Default it.
        * remote.c: Include "process-stratum-target.h".
        (remote_target): Inherit from process_stratum_target.
        <remote_target>: Default it.
        * target.c (default_thread_address_space)
        (default_thread_architecture): Delete.
        * target.h (target_ops) <thread_architecture>: Now returns NULL by
        default.
        <thread_address_space>: Ditto.
        * test-target.h: Include "process-stratum-target.h" instead of
        "target.h".
        (test_target_ops): Inherit from process_stratum_target.
        <test_target_ops>: Default it.
        * tracefile.c (tracefile_target::tracefile_target): Delete.
        * tracefile.h: Include "process-stratum-target.h".
        (tracefile_target): Inherit from process_stratum_target.
        <tracefile_target>: Default it.
        * target-delegates.c: Regenerate.

2018-11-30  Pedro Alves  <palves@redhat.com>

        * Makefile.in (COMMON_SFILES): Add test-target.c.
        * gdbarch-selftests.c: Include "test-target.h".
        * regcache.c: Include "test-target.h".
        * target.c (test_target_info, test_target_ops::info): Move to ...
        * test-target.c: ... this new file.
        * target.h (test_target_ops): Move to ...
        * test-target.h: ... this new file.

2018-11-29  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * source.c (forward_search_command): Fix leak by using
        xrealloc even for the first allocation in the loop, as buf
        is static.

2018-11-29  Rajendra SY  <rajendra.sy@gmail.com>

        PR gdb/23093
        * gdb/fbsd-tdep.c (fbsd_gdb_signal_from_target)
        (fbsd_gdb_signal_to_target): New.
        (fbsd_init_abi): Install gdbarch "signal_from_target" and
        "signal_to_target" methods.

2018-11-29  Tom Tromey  <tom@tromey.com>

        * valarith.c (value_x_unop): Don't set argvec[3].

2018-11-26  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/23917
        * sparc-linux-nat.c (sparc_linux_nat_target): Remove extraneous
        semicolon.

2018-11-26  Pedro Alves  <palves@redhat.com>

        * procfs.c (procfs_notice_thread): Replace uses of
        in_thread_list/is_exited with find_thread_ptid/THREAD_EXITED.
        * sol-thread.c (sol_thread_target::wait)
        (sol_update_thread_list_callback): Likewise.

2018-11-25  Tom Tromey  <tom@tromey.com>

        * ui-out.c (ui_out::field_fmt): Remove comment.
        * tui/tui-out.c (tui_ui_out::do_field_fmt): Remove comment.
        * mi/mi-out.c (mi_ui_out::do_field_fmt): Remove comment.

2018-11-24  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * source.c (open_source_file): Leak fixed in '8e6a5953e1d Fix 4K
        leak in open_source_file' has been partially undone by '2179fbc36d23
        Return scoped_fd from open_source_file'. Re-add the transfer of
        current s->fullname to the unique_xmalloc_ptr fullname given
        to find_and_open_source.

2018-11-23  Pedro Alves  <palves@redhat.com>

        * gdbthread.h (enum thread_state): Move comments here.
        (is_running, is_stopped, is_exited): Remove declarations.

2018-11-22  Pedro Alves  <palves@redhat.com>

        * Makefile.in (COMMON_SFILES): Add thread-iter.c.
        * breakpoint.c (breakpoints_should_be_inserted_now): Replace
        ALL_NON_EXITED_THREADS with all_non_exited_threads.
        (print_one_breakpoint_location): Replace ALL_INFERIORS with
        all_inferiors.
        * bsd-kvm.c: Include inferior.h.
        * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
        with all_non_exited_threads.
        * common/filtered-iterator.h: New.
        * common/safe-iterator.h: New.
        * corelow.c (core_target_open): Don't call init_thread_list here.
        * darwin-nat.c (thread_info_from_private_thread_info): Replace
        ALL_THREADS with all_threads.
        * fbsd-nat.c (fbsd_nat_target::resume): Replace
        ALL_NON_EXITED_THREADS with inf->non_exited_threads.
        * fbsd-tdep.c (fbsd_make_corefile_notes): Replace
        ALL_NON_EXITED_THREADS with inf->non_exited_threads.
        * fork-child.c (postfork_hook): Don't call init_thread_list here.
        * gdbarch-selftests.c (register_to_value_test): Adjust.
        * gdbthread.h: Don't include "inferior.h" here.
        (struct inferior): Forward declare.
        (enum step_over_calls_kind): Moved here from inferior.h.
        (thread_info::deletable): Definition moved to thread.c.
        (find_thread_ptid (inferior *, ptid_t)): Declare.
        (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
        Include "thread-iter.h".
        (all_threads, all_non_exited_threads, all_threads_safe): New.
        (any_thread_p): Declare.
        (thread_list): Delete.
        * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
        all_non_exited_threads.
        (proceed_after_attach_callback): Delete.
        (proceed_after_attach): Take an inferior pointer instead of an
        integer PID.  Adjust to use range-for.
        (attach_post_wait): Pass down inferior pointer instead of pid.
        Use range-for instead of ALL_NON_EXITED_THREADS.
        (detach_command): Remove init_thread_list call.
        * inferior-iter.h: New.
        * inferior.c (struct delete_thread_of_inferior_arg): Delete.
        (delete_thread_of_inferior): Delete.
        (delete_inferior, exit_inferior_1): Use range-for with
        inf->threads_safe() instead of iterate_over_threads.
        (inferior_appeared): Call init_thread_list here.
        (discard_all_inferiors): Use all_non_exited_inferiors.
        (find_inferior_id, find_inferior_pid): Use all_inferiors.
        (iterate_over_inferiors): Use all_inferiors_safe.
        (have_inferiors, number_of_live_inferiors): Use
        all_non_exited_inferiors.
        (number_of_inferiors): Use all_inferiors and std::distance.
        (print_inferior): Use all_inferiors.
        * inferior.h: Include gdbthread.h.
        (enum step_over_calls_kind): Moved to gdbthread.h.
        (struct inferior) <thread_list>: New field.
        <threads, non_exited_threads, threads_safe>: New methods.
        (ALL_INFERIORS): Delete.
        Include "inferior-iter.h".
        (ALL_NON_EXITED_INFERIORS): Delete.
        (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
        functions.
        * inflow.c (child_interrupt, child_pass_ctrlc): Replace
        ALL_NON_EXITED_THREADS with all_non_exited_threads.
        * infrun.c (follow_exec): Use all_threads_safe.
        (clear_proceed_status, proceed): Use all_non_exited_threads.
        (init_wait_for_inferior): Don't clear inline frame state here.
        (infrun_thread_stop_requested, for_each_just_stopped_thread): Use
        all_threads instead of ALL_NON_EXITED_THREADS.
        (random_pending_event_thread): Use all_non_exited_threads instead
        of ALL_NON_EXITED_THREADS.  Use a lambda for repeated code.
        (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
        instead of ALL_NON_EXITED_THREADS.
        (handle_no_resumed): Use all_non_exited_threads instead of
        ALL_NON_EXITED_THREADS.  Use all_inferiors instead of
        ALL_INFERIORS.
        (restart_threads, switch_back_to_stepped_thread): Use
        all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
        * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
        all_inferiors.
        (kill_unfollowed_fork_children): Use inf->non_exited_threads
        instead of ALL_NON_EXITED_THREADS.
        * linux-tdep.c (linux_make_corefile_notes): Use
        inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
        * linux-thread-db.c (thread_db_target::update_thread_list):
        Replace ALL_INFERIORS with all_inferiors.
        (thread_db_target::thread_handle_to_thread_info): Use
        inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
        * mi/mi-interp.c (multiple_inferiors_p): New.
        (mi_on_resume_1): Simplify using all_non_exited_threads and
        multiple_inferiors_p.
        * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
        instead of ALL_NON_EXITED_THREADS.
        * nto-procfs.c (nto_procfs_target::open): Don't call
        init_thread_list here.
        * record-btrace.c (record_btrace_target_open)
        (record_btrace_target::stop_recording)
        (record_btrace_target::close)
        (record_btrace_target::record_is_replaying)
        (record_btrace_target::resume, record_btrace_target::wait)
        (record_btrace_target::record_stop_replaying): Use
        all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
        * record-full.c (record_full_wait_1): Use all_non_exited_threads
        instead of ALL_NON_EXITED_THREADS.
        * regcache.c (cooked_read_test): Remove reference to global
        thread_list.
        * remote-sim.c (gdbsim_target::create_inferior): Don't call
        init_thread_list here.
        * remote.c (remote_target::update_thread_list): Use
        all_threads_safe instead of ALL_NON_EXITED_THREADS.
        (remote_target::process_initial_stop_replies): Replace
        ALL_INFERIORS with all_non_exited_inferiors and use
        all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
        (remote_target::open_1): Don't call init_thread_list here.
        (remote_target::append_pending_thread_resumptions)
        (remote_target::remote_resume_with_hc): Use all_non_exited_threads
        instead of ALL_NON_EXITED_THREADS.
        (remote_target::commit_resume)
        (remote_target::remove_new_fork_children): Replace ALL_INFERIORS
        with all_non_exited_inferiors and use all_non_exited_threads
        instead of ALL_NON_EXITED_THREADS.
        (remote_target::kill_new_fork_children): Use
        all_non_exited_threads instead of ALL_NON_EXITED_THREADS.  Remove
        init_thread_list and init_wait_for_inferior calls.
        (remote_target::remote_btrace_maybe_reopen)
        (remote_target::thread_handle_to_thread_info): Use
        all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
        * target.c (target_terminal::restore_inferior)
        (target_terminal_is_ours_kind): Replace ALL_INFERIORS with
        all_non_exited_inferiors.
        * thread-iter.c: New file.
        * thread-iter.h: New file.
        * thread.c: Include "inline-frame.h".
        (thread_list): Delete.
        (clear_thread_inferior_resources): Call clear_inline_frame_state.
        (init_thread_list): Use all_threads_safe instead of
        ALL_THREADS_SAFE.  Adjust to per-inferior thread lists.
        (new_thread): Adjust to per-inferior thread lists.
        (add_thread_silent): Pass inferior to find_thread_ptid.
        (thread_info::deletable): New, moved from the header.
        (delete_thread_1): Adjust to per-inferior thread lists.
        (find_thread_global_id): Use inf->threads().
        (find_thread_ptid): Use find_inferior_ptid and pass inferior to
        find_thread_ptid.
        (find_thread_ptid(inferior*, ptid_t)): New overload.
        (iterate_over_threads): Use all_threads_safe.
        (any_thread_p): New.
        (thread_count): Use all_threads and std::distance.
        (live_threads_count): Use all_non_exited_threads and
        std::distance.
        (valid_global_thread_id): Use all_threads.
        (in_thread_list): Use find_thread_ptid.
        (first_thread_of_inferior): Adjust to per-inferior thread lists.
        (any_thread_of_inferior, any_live_thread_of_inferior): Use
        inf->non_exited_threads().
        (prune_threads, delete_exited_threads): Use all_threads_safe.
        (thread_change_ptid): Pass inferior pointer to find_thread_ptid.
        (set_resumed, set_running): Use all_non_exited_threads.
        (is_thread_state, is_stopped, is_exited, is_running)
        (is_executing): Delete.
        (set_executing, set_stop_requested, finish_thread_state): Use
        all_non_exited_threads.
        (print_thread_info_1): Use all_inferiors and all_threads.
        (thread_apply_all_command): Use all_non_exited_threads.
        (thread_find_command): Use all_threads.
        (update_threads_executing): Use all_non_exited_threads.
        * tid-parse.c (parse_thread_id): Use inf->threads.
        * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().

2018-11-22  Pedro Alves  <palves@redhat.com>

        * infrun.c (follow_exec) <set follow-exec new>: Add thread and
        switch to it before calling into try_open_exec_file.

2018-11-22  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_on_user_selected_context_changed): Use
        inferior_thread instead of find_thread_ptid, and only when
        inferior_ptid is not null_ptid.
        * inferior.c (add_inferior): Don't include target_pid_to_str
        output when the inferior is not started.
        * python/py-inferior.c (python_on_normal_stop): Don't use
        find_thread_ptid.
        (tui_on_user_selected_context_changed): Use inferior_thread
        instead of find_thread_ptid, and only when inferior_ptid is not
        null_ptid.

2018-11-21  Benno Fünfstück  <benno.fuenfstueck@gmail.com>

        PR python/23714
        * gdb/python/python.c (execute_gdb_command): Call
        prevent_dont_repeat earlier to avoid affecting dont_repeat.

2018-11-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * Makefile.in (ALL_TARGET_OBS): Add arch/riscv.o.
        (HFILES_NO_SRCDIR): Add arch/riscv.h.
        * arch/riscv.c: New file.
        * arch/riscv.h: New file.
        * configure.tgt: Add cpu_obs list of riscv, move riscv-tdep.o into
        this list, and add arch/riscv.o.
        * features/Makefile: Add riscv features.
        * features/riscv/32bit-cpu.c: New file.
        * features/riscv/32bit-cpu.xml: New file.
        * features/riscv/32bit-csr.c: New file.
        * features/riscv/32bit-csr.xml: New file.
        * features/riscv/32bit-fpu.c: New file.
        * features/riscv/32bit-fpu.xml: New file.
        * features/riscv/64bit-cpu.c: New file.
        * features/riscv/64bit-cpu.xml: New file.
        * features/riscv/64bit-csr.c: New file.
        * features/riscv/64bit-csr.xml: New file.
        * features/riscv/64bit-fpu.c: New file.
        * features/riscv/64bit-fpu.xml: New file.
        * features/riscv/rebuild-csr-xml.sh: New file.
        * riscv-tdep.c: Add 'arch/riscv.h' include.
        (riscv_gdb_reg_names): Delete.
        (csr_reggroup): New global.
        (struct riscv_register_alias): Delete.
        (struct riscv_register_feature): New structure.
        (riscv_register_aliases): Delete.
        (riscv_xreg_feature): New global.
        (riscv_freg_feature): New global.
        (riscv_virtual_feature): New global.
        (riscv_csr_feature): New global.
        (riscv_create_csr_aliases): New function.
        (riscv_read_misa_reg): Delete.
        (riscv_has_feature): Delete.
        (riscv_isa_xlen): Simplify, just return cached xlen.
        (riscv_isa_flen): Simplify, just return cached flen.
        (riscv_has_fp_abi): Update for changes in struct gdbarch_tdep.
        (riscv_register_name): Update to make use of tdesc_register_name.
        Look up xreg and freg names in the new globals riscv_xreg_feature
        and riscv_freg_feature.  Don't supply csr aliases here.
        (riscv_fpreg_q_type): Delete.
        (riscv_register_type): Use tdesc_register_type in almost all
        cases, override the returned type in a few specific cases only.
        (riscv_print_one_register_info): Handle errors reading registers.
        (riscv_register_reggroup_p): Use tdesc_register_in_reggroup_p for
        registers that are otherwise unknown to GDB.  Also check the
        csr_reggroup.
        (riscv_print_registers_info): Remove assert about upper register
        number, and use gdbarch_register_reggroup_p instead of
        short-cutting.
        (riscv_find_default_target_description): New function.
        (riscv_check_tdesc_feature): New function.
        (riscv_add_reggroups): New function.
        (riscv_setup_register_aliases): New function.
        (riscv_init_reggroups): New function.
        (_initialize_riscv_tdep): Add calls to setup CSR aliases, and
        setup register groups.  Register new riscv debug variable.
        * riscv-tdep.h: Add 'arch/riscv.h' include.
        (struct gdbarch_tdep): Remove abi union, and add
        riscv_gdbarch_features field.  Remove cached quad floating point
        type, and provide initialisation for double type field.
        * target-descriptions.c (maint_print_c_tdesc_cmd): Add riscv to
        the list of targets using the feature based target descriptions.
        * NEWS: Mention target description support.

2018-11-21  Pedro Alves  <palves@redhat.com>

        * valops.c (find_method_list, value_find_oload_method_list)
        (find_overload_match, find_oload_champ): Rename parameters and
        locals.

2018-11-21  Pedro Alves  <palves@redhat.com>

        * valops.c (find_method_list): Replace pointer and length
        parameters with an gdb::array_view.  Adjust.
        (value_find_oload_method_list): Likewise.
        (find_overload_match): Use gdb::array_view for methods list.
        Adjust to find_oload_champ interface change.
        (find_oload_champ): 'xm_worker_vec' parameter now a pointer/array.
        'num_fns' parameter now a size_t.  Eliminate 'fn_count' local.

2018-11-21  Pedro Alves  <palves@redhat.com>

        * gdbtypes.c (compare_badness): Change type of parameters to const
        reference.  Adjust to badness_vector being a std::vector now.
        (rank_function): Adjust to badness_vector being a std::vector now.
        * gdbtypes.h (badness_vector): Now a typedef to std::vector.
        (LENGTH_MATCH): Delete.
        (compare_badness): Change type of parameters to const reference.
        (rank_function): Return a badness_vector by value now.
        (find_overload_match): Adjust to badness_vector being a
        std::vector now.  Remove cleanups.
        (find_oload_champ_namespace): 'oload_champ_bv' parameter now a
        badness_vector pointer.
        (find_oload_champ_namespace_loop): 'oload_champ_bv' parameter now
        a badness_vector pointer.  Adjust to badness_vector being a
        std::vector now.  Remove cleanups.
        (find_oload_champ): 'oload_champ_bv' parameter now
        a badness_vector pointer.  Adjust to badness_vector being a
        std::vector now.  Remove cleanups.

2018-11-21  Pedro Alves  <palves@redhat.com>

        * cp-support.c (sym_return_val_size, sym_return_val_index)
        (sym_return_val): Delete.
        (overload_list_add_symbol): Add std::vector parameter.  Adjust to
        add to the vector.
        (make_symbol_overload_list): Adjust to return a std::vector
        instead of maintaining a global open coded vector.
        (make_symbol_overload_list_block): Add std::vector parameter.
        (make_symbol_overload_list_block): Rename to ...
        (add_symbol_overload_list_block): ... this and add std::vector
        parameter.
        (make_symbol_overload_list_namespace): Rename to ...
        (add_symbol_overload_list_namespace): ... this and add std::vector
        parameter.
        (make_symbol_overload_list_adl_namespace): Rename to ...
        (add_symbol_overload_list_adl_namespace): ... this and add
        std::vector parameter.
        (make_symbol_overload_list_adl): Delete.
        (add_symbol_overload_list_adl): New.
        (make_symbol_overload_list_using): Rename to ...
        (add_symbol_overload_list_using): ... this and add std::vector
        parameter.
        (make_symbol_overload_list_qualified): Rename to ...
        (add_symbol_overload_list_qualified): ... this and add std::vector
        parameter.
        * cp-support.h: Include "common/array-view.h" and <vector>.
        (make_symbol_overload_list): Change return type to std::vector.
        (make_symbol_overload_list_adl): Delete declaration.
        (add_symbol_overload_list_adl): New declaration.
        * valops.c (find_overload_match): Local 'oload_syms' now a
        std::vector.
        (find_oload_champ_namespace): 'oload_syms' parameter now a
        std::vector pointer.
        (find_oload_champ_namespace_loop): 'oload_syms' parameter now a
        std::vector pointer.  Adjust to new make_symbol_overload_list
        interface.

2018-11-21  Pedro Alves  <palves@redhat.com>

        * common/array-view.h (array_view::splice(size_type, size_t)): New.
        (array_view::splice(size_type)): New.
        * eval.c (eval_call, evaluate_funcall): Adjust to use array_view.
        * extension.c (xmethod_worker::get_arg_types): Adjust to return an
        std::vector.
        (xmethod_worker::get_result_type): Adjust to use gdb::array_view.
        * extension.h: Include "common/array-view.h".
        (xmethod_worker::invoke): Adjust to use gdb::array_view.
        (xmethod_worker::get_arg_types): Adjust to return an std::vector.
        (xmethod_worker::get_result_type): Adjust to use gdb::array_view.
        (xmethod_worker::do_get_arg_types): Adjust to use std::vector.
        (xmethod_worker::do_get_result_type): Adjust to use
        gdb::array_view.
        * gdbtypes.c (rank_function): Adjust to use gdb::array_view.
        * gdbtypes.h: Include "common/array-view.h".
        (rank_function): Adjust to use gdb::array_view.
        * python/py-xmethods.c (python_xmethod_worker::invoke)
        (python_xmethod_worker::do_get_arg_types)
        (python_xmethod_worker::do_get_result_type)
        (python_xmethod_worker::invoke): Adjust to new interfaces.
        * valarith.c (value_user_defined_cpp_op, value_user_defined_op)
        (value_x_binop, value_x_unop): Adjust to use gdb::array_view.
        * valops.c (find_overload_match, find_oload_champ_namespace)
        (find_oload_champ_namespace_loop, find_oload_champ): Adjust to use
        gdb:array_view and the new xmethod_worker interfaces.
        * value.c (result_type_of_xmethod, call_xmethod): Adjust to use
        gdb::array_view.
        * value.h (find_overload_match, result_type_of_xmethod)
        (call_xmethod): Adjust to use gdb::array_view.
        * unittests/array-view-selftests.c: Add slicing tests.

2018-11-21  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_evaluate_subexp): Adjust to pass an array_view.
        * common/array-view.h (make_array_view): New.
        * compile/compile-object-run.c (compile_object_run): Adjust to
        pass an array_view.
        * elfread.c (elf_gnu_ifunc_resolve_addr): Adjust.
        * eval.c (eval_call): Adjust to pass an array_view.
        (evaluate_subexp_standard): Adjust to pass an array_view.
        * gcore.c (call_target_sbrk): Adjust to pass an array_view.
        * guile/scm-value.c (gdbscm_value_call): Likewise.
        * infcall.c (push_dummy_code): Replace pointer + size parameters
        with an array_view parameter.
        (call_function_by_hand, call_function_by_hand_dummy): Likewise and
        adjust.
        * infcall.h: Include "common/array-view.h".
        (call_function_by_hand, call_function_by_hand_dummy): Replace
        pointer + size parameters with an array_view parameter.
        * linux-fork.c (inferior_call_waitpid): Adjust to use array_view.
        * linux-tdep.c (linux_infcall_mmap): Likewise.
        * objc-lang.c (lookup_objc_class, lookup_child_selector)
        (value_nsstring, print_object_command): Likewise.
        * python/py-value.c (valpy_call): Likewise.
        * rust-lang.c (rust_evaluate_funcall): Likewise.
        * spu-tdep.c (flush_ea_cache): Likewise.
        * valarith.c (value_x_binop, value_x_unop): Likewise.
        * valops.c (value_allocate_space_in_inferior): Likewise.
        * unittests/array-view-selftests.c (run_tests): Add
        gdb::make_array_view test.

2018-11-20  Andrew Burgess  <andrew.burgess@embecosm.com>

        * cli-out.c (cli_ui_out::do_field_int): Use string_printf rather
        than a fixed size buffer.

2018-11-20  Andrew Burgess  <andrew.burgess@embecosm.com>

        * breakpoint.c (print_one_breakpoint_location): Reduce whitespace,
        and remove insertion of extra spaces in GDB's output.
        * cli-out.c (cli_ui_out::do_field_fmt): Update header comment.
        Layout field into a temporary buffer, and then output it as a
        string field.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * NEWS: Document the language choice done by
        'info [types|functions|variables]|rbreak'.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * symtab.c (treg_matches_sym_type_name): Use
        scoped_switch_to_sym_language_if_auto instead of local logic.
        (print_symbol_info): Use scoped_switch_to_sym_language_if_auto
        to switch to SYM language when language mode is auto.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * language.h (scoped_switch_to_sym_language_if_auto): New class.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * symtab.c (search_symbols): Properly check absence of type regexp
        before entering the loop scanning the minimal symbols.

2018-11-20  John Darrington  <john@darrington.wattle.id.au>

        * s12z-tdep.c (s12z_extract_return_value): New function.
        (inv_reg_perm) New array.
        (s12z_return_value): Populate readbuf if non-null.

2018-11-20  Eli Zaretskii  <eliz@gnu.org>

        * common/filestuff.c (gdb_fopen_cloexec): Disable use of "e" mode
        with 'fopen' also if O_CLOEXEC is equal to O_NOINHERIT, to cater
        to MinGW fixed by Gnulib.
        (O_NOINHERIT): Define if not defined.

2018-11-19  John Darrington  <john@darrington.wattle.id.au>

        * s12z-tdep.c (s12z_frame_cache): Add an assertion.

2018-11-19  Simon Marchi  <simon.marchi@polymtl.ca>

        * infrun.c (displaced_step_inferior_state) <next>: Remove.

2018-11-19  Tom Tromey  <tom@tromey.com>

        * source.c (get_filename_and_charpos): Return void.

2018-11-19  Simon Marchi  <simon.marchi@polymtl.ca>

        * skip.c (_initialize_step_skip): Fix "info skip" help.

2018-11-16  Tom Tromey  <tom@tromey.com>

        PR rust/23625:
        * rust-lang.c (rust_internal_print_type): Handle TYPE_CODE_PTR.

2018-11-19  Simon Marchi  <simon.marchi@ericsson.com>

        * infrun.c (displaced_step_inferior_states): Change type to
        std::forward_list.
        (get_displaced_stepping_state): Adjust.
        (displaced_step_in_progress_any_inferior): Adjust.
        (add_displaced_stepping_state): Adjust.
        (remove_displaced_stepping_state): Adjust.

2018-11-18  Tom Tromey  <tom@tromey.com>

        PR build/23814:
        * target-delegates.c: Rebuild.
        * ia64-linux-nat.c (class ia64_linux_nat_target)
        <have_steppable_watchpoint>: Use override.  Return true, not 1.
        (ia64_linux_nat_target::can_use_hw_breakpoint): Rename.  Remove
        "self" argument.
        (ia64_linux_nat_target::low_new_thread): Rename.
        (class ia64_linux_nat_target) <read_description>: Don't declare.
        * target.h (struct target_ops) <have_steppable_watchpoint>: Return
        bool.

2018-11-16  Alan Hayward  <alan.hayward@arm.com>

        PR gdb/22736:
        * aarch64-tdep.c (aarch64_push_dummy_call): Remove
        lang_struct_return code.

2018-11-16  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (aarch64_push_dummy_call): Replace arg with
        return_method.
        * alpha-tdep.c (alpha_push_dummy_call): Likewise.
        * amd64-tdep.c (amd64_push_arguments): Likewise.
        (amd64_push_dummy_call): Likewise.
        * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
        * arc-tdep.c (arc_push_dummy_call): Likewise.
        * arm-tdep.c (arm_push_dummy_call): Likewise.
        * avr-tdep.c (avr_push_dummy_call): Likewise.
        * bfin-tdep.c (bfin_push_dummy_call): Likewise.
        * cris-tdep.c (cris_push_dummy_call): Likewise.
        * csky-tdep.c (csky_push_dummy_call): Likewise.
        * frv-tdep.c (frv_push_dummy_call): Likewise.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Regenerate.
        * gdbarch.sh (gdbarch_push_dummy_call): Replace arg with
        return_method.
        * h8300-tdep.c (h8300_push_dummy_call): Likewise.
        * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
        (hppa64_push_dummy_call): Likewise.
        * i386-darwin-tdep.c (i386_darwin_push_dummy_call): Likewise.
        * i386-tdep.c (i386_push_dummy_call): Likewise.
        * ia64-tdep.c (ia64_push_dummy_call): Likewise.
        * infcall.c (call_function_by_hand_dummy): Likewise.
        * iq2000-tdep.c (iq2000_push_dummy_call): Likewise.
        * lm32-tdep.c (lm32_push_dummy_call): Likewise.
        * m32c-tdep.c (m32c_push_dummy_call): Likewise.
        * m32r-tdep.c (m32r_push_dummy_call): Likewise.
        * m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise.
        * m68k-tdep.c (m68k_push_dummy_call): Likewise.
        * mep-tdep.c (mep_push_dummy_call): Likewise.
        * mips-tdep.c (mips_eabi_push_dummy_call): Likewise.
        (mips_n32n64_push_dummy_call): Likewise.
        (mips_o32_push_dummy_call): Likewise.
        (mips_o64_push_dummy_call): Likewise.
        * mn10300-tdep.c (mn10300_push_dummy_call): Likewise.
        * msp430-tdep.c (msp430_push_dummy_call): Likewise.
        * nds32-tdep.c (nds32_push_dummy_call): Likewise.
        * nios2-tdep.c (nios2_push_dummy_call): Likewise.
        * or1k-tdep.c (or1k_push_dummy_call): Likewise.
        * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise.
        (ppc64_sysv_abi_push_dummy_call): Likewise.
        * ppc-tdep.h (ppc_sysv_abi_push_dummy_call): Likewise.
        (ppc64_sysv_abi_push_dummy_call): Likewise.
        * riscv-tdep.c (riscv_push_dummy_call): Likewise.
        * rl78-tdep.c (rl78_push_dummy_call): Likewise.
        * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
        * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
        * rx-tdep.c (rx_push_dummy_call): Likewise.
        * s390-tdep.c (s390_push_dummy_call): Likewise.
        * score-tdep.c (score_push_dummy_call): Likewise.
        * sh-tdep.c (sh_push_dummy_call_fpu): Likewise.
        (sh_push_dummy_call_nofpu): Likewise.
        * sparc-tdep.c (sparc32_store_arguments): Likewise.
        (sparc32_push_dummy_call): Likewise.
        * sparc64-tdep.c (sparc64_store_arguments): Likewise.
        (sparc64_push_dummy_call): Likewise.
        * spu-tdep.c (spu_push_dummy_call): Likewise.
        * tic6x-tdep.c (tic6x_push_dummy_call): Likewise.
        * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
        * v850-tdep.c (v850_push_dummy_call): Likewise.
        * vax-tdep.c (vax_push_dummy_call): Likewise.
        * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise.
        * xtensa-tdep.c (xtensa_push_dummy_call): Likewise.

2018-11-16  Alan Hayward  <alan.hayward@arm.com>

        * gdbarch.sh (enum function_call_return_method): Add enum.
        * gdbarch.h: Regenerate.
        * infcall.c (call_function_by_hand_dummy): Replace vars with enum.

2018-11-15  Joel Brobecker  <brobecker@adacore.com>

        * unittests/copy_bitwise-selftests.c: New file.
        * utils.c (selftests::bits_to_str, selftests::check_copy_bitwise)
        (selftests::copy_bitwise_tests): Delete, moving this code to
        unittests/copy_bitwise-selftests.c instead.
        (_initialize_utils): Do not register copy_bitwise tests.
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/copy_bitwise-selftests.c.

2018-11-14  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (move_bits): Delete. Update all callers to use
        copy_bitwise instead.
        * dwarf2loc.c (copy_bitwise, bits_to_str::bits_to_str)
        (selftests::check_copy_bitwise, selftests::copy_bitwise_tests):
        Move from here to utils.c.
        (_initialize_dwarf2loc): Remove call to register copy_bitwise
        selftests.
        * utils.h (copy_bitwise): Add declaration.
        * utils.c (copy_bitwise, bits_to_str::bits_to_str)
        (selftests::check_copy_bitwise, selftests::copy_bitwise_tests):
        Moved here from dwarf2loc.c.
        (_initialize_utils): Register copy_bitwise selftests.

2018-11-14  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (struct riscv_arg_info): New field is_unnamed.
        (riscv_call_arg_scalar_int): If unnamed arg with twice xlen alignment,
        then increment next_regnum if odd.
        (riscv_arg_location): New arg is_unnamed.  Set ainfo->is_unnamed.
        (riscv_push_dummy_call): New local ftype.  Call check_typedef to set
        function type.  Pass new arg to riscv_arg_location based on function
        type.
        (riscv_return_value): Pass new arg to riscv_arg_location.

        * riscv-tdep.c (BIGGEST_ALIGNMENT): New.
        (riscv_type_alignment) <TYPE_CODE_ARRAY>: If TYPE_VECTOR, return min
        of TYPE_LENGTH and BIGGEST_ALIGNMENT.

        * riscv-tdep.c (riscv_call_arg_scalar_int): Use std::min when
        setting len.  New local align, set to max of arg align and xlen,
        and pass to first riscv_assign_stack_location call.

2018-11-12  Simon Marchi  <simon.marchi@polymtl.ca>

        * skip.c (complete_skip_number): New function.
        (_initialize_step_skip): Add completers to some skip commands.

2018-11-09  Tom Tromey  <tom@tromey.com>

        * remote.c (remote_g_packet_guess_s): Remove typedef and DEF_VEC.
        (struct remote_g_packet_data): Derive from allocate_on_obstack.
        <guesses>: Now a std::vector.
        (remote_g_packet_data_init, register_remote_g_packet_guess):
        Update.
        (remote_read_description_p): Update.  Return bool.
        (remote_target::read_description): Update.
        (struct remote_g_packet_guess): Add constructor.

2018-11-09  Tom Tromey  <tom@tromey.com>

        * common/scoped_fd.h (class scoped_fd): Add move constructor and
        move assignment operator.
        * psymtab.c (psymtab_to_fullname): Update.
        * source.h (open_source_file): Return scoped_fd.
        (find_and_open_source): Likewise.
        * source.c (open_source_file): Return scoped_fd.
        (get_filename_and_charpos): Update.
        (print_source_lines_base): Update.  Use scoped_fd::to_file.
        (forward_search_command): Likewise.
        (reverse_search_command): Likewise.
        (find_and_open_source): Return scoped_fd.
        * tui/tui-source.c (tui_set_source_content): Update.  Use
        gdb_file_up.

2018-11-09  John Baldwin  <jhb@FreeBSD.org>

        * minsyms.c (minimal_symbol_reader::install): Fix unsigned
        overflow.

2018-11-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>

        * configure: Regenerate.

2018-11-09  Tom de Vries  <tdevries@suse.de>

        * symtab.c (symbol_set_names): Call symbol_find_demangled_name
        unconditionally, to set the language of the symbol.  Manage freeing
        returned pointer using gdb::unique_xmalloc_ptr.

2018-11-08  Tom Tromey  <tom@tromey.com>

        * record.c (require_record_target): Upper-case "<TAB>".

2018-11-08  Tom Tromey  <tom@tromey.com>

        * python/lib/gdb/command/pretty_printers.py
        (InfoPrettyPrinter.invoke): Don't indent "objfile" heading.

2018-11-08  Tom Tromey  <tom@tromey.com>

        PR gdb/23555:
        PR gdb/23838:
        * target.h (target_supports_terminal_ours): Return bool.
        * target.c (target_supports_terminal_ours): Handle case where
        current_top_target returns nullptr.  Return bool.

2018-11-08  Joel Brobecker  <brobecker@adacore.com>

        * aarch64-tdep.c (aapcs_is_vfp_call_or_return_candidate_1):
        return the correct count for potential HFAs.

2018-11-08  Jan Beulich  <jbeulich@suse.com>

        * i387-tdep.c (i387_supply_xsave): Split handling of
        X86_XSTATE_ZMM_H and X86_XSTATE_ZMM.
        (i387_collect_xsave): Likewise.

2018-11-08  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_insn::decode): Update header comment.
        (riscv_frame_this_id): Catch errors thrown while building the
        frame cache, leave the frame id as the default, which is the outer
        frame id.

2018-11-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (read_atcb): Only set task_info->called_task if
        task_info->state == Entry_Caller_Sleep.
        (print_ada_task_info): Do not check task_info->state before
        checking task_info->called_task.
        (info_task): Likewise.

2018-11-07  Joel Brobecker  <brobecker@adacore.com>

        * ada-tasks.c (read_atcb): Clear task_info before computing
        the value of each of its fields.

2018-11-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * dwarf2read.c (dwarf2_init_integer_type): Check for name being
        NULL before dereferencing it.

2018-11-06  Tom de Vries  <tdevries@suse.de>

        * linux-tdep.c (linux_vsyscall_range_raw): Use xmalloc to allocate
        program headers.

2018-11-06  Max Filippov  <jcmvbkbc@gmail.com>

        * configure.tgt (xtensa*-*-linux*): Change to xtensa*-*-*linux*
        so that it applies to uclinux as well.

2018-11-06  Marius Muench  <marius.muench@eurecom.fr>

        * arm-tdep.c (arm_scan_prologue): Don't dereference FP reg
        when on AAPCS.

2018-11-06  John Baldwin  <jhb@FreeBSD.org>

        * riscv-fbsd-nat.c (getregs_supplies): Return true for
        RISCV_CSR_SSTATUS_REGNUM.

2018-11-04  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * source.c (open_source_file): Fix leak by transferring the
        current s->fullname to the unique_xmalloc_ptr fullname given
        to find_and_open_source.

2018-11-04  Tom Tromey  <tom@tromey.com>

        * varobj.c (install_default_visualizer): Update.
        * python/python-internal.h (gdbpy_get_varobj_pretty_printer):
        Return gdbpy_ref.
        * python/py-prettyprint.c (search_pp_list): Return gdbpy_ref.
        (find_pretty_printer_from_progspace)
        (find_pretty_printer_from_gdb, find_pretty_printer)
        (gdbpy_get_varobj_pretty_printer): Return gdbpy_ref.
        (gdbpy_get_varobj_pretty_printer, gdbpy_default_visualizer):
        Update.

2018-11-04  Tom Tromey  <tom@tromey.com>

        * python/python.c (gdbpy_parameter_value): Update.
        * python/python-internal.h (python_string_to_unicode)
        (python_string_to_target_python_string)
        (host_string_to_python_string): Return gdbpy_ref.
        * python/py-utils.c (python_string_to_unicode)
        (unicode_to_encoded_python_string)
        (unicode_to_target_python_string)
        (python_string_to_target_string)
        (python_string_to_target_python_string): Return gdbpy_ref.
        (python_string_to_host_string): Update.
        (host_string_to_python_string): Return gdbpy_ref.
        * python/py-symtab.c (stpy_get_filename, stpy_get_producer)
        (stpy_fullname): Update.
        * python/py-progspace.c (pspy_get_filename, pspy_solib_name):
        Update.
        * python/py-prettyprint.c (print_string_repr): Update.
        * python/py-objfile.c (objfpy_get_filename, objfpy_get_username)
        (objfpy_get_build_id): Update.
        * python/py-breakpoint.c (bppy_get_location)
        (bppy_get_expression, bppy_get_condition, bppy_get_commands):
        Update.

2018-11-04  Tom Tromey  <tom@tromey.com>

        * python/python-internal.h (gdb_py_object_from_longest)
        (gdb_py_object_from_ulongest): Return gdbpy_ref.
        * python/py-value.c (valpy_int): Update.
        * python/py-utils.c (gdb_py_object_from_longest): Return
        gdbpy_ref.
        (gdb_py_object_from_ulongest): Likewise.
        * python/py-type.c (typy_get_alignof): Update.
        * python/py-linetable.c (ltpy_get_all_source_lines)
        (ltpy_entry_get_line, ltpy_entry_get_pc): Update.
        * python/py-block.c (blpy_get_start, blpy_get_end): Update.

2018-11-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * ada-lang.c (_initialize_ada_language): Fix typo.

2018-11-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * language.c (type): Remove.
        (_initialize_language): Remove assignment to type.

2018-11-02  Joel Brobecker  <brobecker@adacore.com>

        * aarch64-ravenscar-thread.h, aarch64-ravenscar-thread.c: New files.
        * aarch64-tdep.c: #include "aarch64-ravenscar-thread.h".
        (aarch64_gdbarch_init): Add call to register_aarch64_ravenscar_ops.
        * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-ravenscar-thread.o.
        (HFILES_NO_SRCDIR): Add aarch64-ravenscar-thread.h.
        (ALLDEPFILES): Add aarch64-ravenscar-thread.c.
        * configure.tgt (cpu_obs) [aarch64*-*-*]: Add ravenscar-thread.o
        and aarch64-ravenscar-thread.o.
        * NEWS: Add entry documenting Ravenscar tasking support
        on AArch64 ELF.

2018-11-02  Matthew Malcomson  <matthew.malcomson@arm.com>

        * symtab.c (info_functions_command): Initialize quiet flag.
        * stack.c (info_args_command): Likewise.

2018-11-01  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (riscv_breakpoint_kind_from_pc): New local unaligned_p.
        Set if pcptr if unaligned.  Return 2 if unaligned_p true.  Update
        debugging messages.

2018-11-01  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_watch_location_expression): New function.
        (ada_language_defn): Set la_watch_location_expression to
        ada_watch_location_expression.

2018-11-01  Joel Brobecker  <brobecker@adacore.com>

        * print-utils.c (int_string): Remove unnecessary trailing spaces.

2018-11-01  Joel Brobecker  <brobecker@adacore.com>

        * rs6000-tdep.c (skip_prologue): Fix potential negative left
        shifting.

2018-11-01  Jerome Guitton  <guitton@adacore.com>
            Joel Brobecker  <brobecker@adacore.com>

        * defs.h (enum gdb_osabi): Add GDB_OSABI_PIKEOS.
        * osabi.c (gdb_osabi_names): Add name for GDB_OSABI_PIKEOS.
        * arm-pikeos-tdep.c: New file.
        * configure.tgt: Add arm-pikeos-tdep.o to the case of ARM
        embedded system.
        * Makefile.in (ALL_TARGET_OBS): Add arm-pikeos-tdep.o.

2018-11-01  Simon Marchi  <simon.marchi@ericsson.com>

        * common/pathstuff.c (get_standard_temp_dir): New.
        * common/pathstuff.h (get_standard_temp_dir): New.
        * config.in: Re-generate.
        * configure: Re-generate.
        * configure.ac: Don't check for mkdtemp.
        * gnulib/aclocal-m4-deps.mk: Re-generate.
        * gnulib/aclocal.m4: Re-generate.
        * gnulib/config.in: Re-generate.
        * gnulib/configure: Re-generate.
        * gnulib/import/Makefile.am: Re-generate.
        * gnulib/import/Makefile.in: Re-generate.
        * gnulib/import/m4/gnulib-cache.m4: Re-generate.
        * gnulib/import/m4/gnulib-comp.m4: Re-generate.
        * gnulib/import/m4/mkdtemp.m4: New file.
        * gnulib/import/mkdtemp.c: New file.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES):
        Add mkdtemp module.
        * unittests/mkdir-recursive-selftests.c (test): Use
        get_standard_temp_dir.
        (_initialize_mkdir_recursive_selftests): Remove HAVE_MKDTEMP
        ifdef.
        * compile/compile.c (get_compile_file_tempdir): Likewise.

2018-11-01  Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>

        * rs6000-aix-tdep.c: Include "trad-frame.h" and "frame-unwind.h".
        (SIG_FRAME_LR_OFFSET64): New define.
        (SIG_FRAME_FP_OFFSET64): New define.
        (aix_sighandle_frame_cache): New Function.
        (aix_sighandle_frame_this_id): New Function.
        (aix_sighandle_frame_prev_register): New Function.
        (aix_sighandle_frame_sniffer): New Function.
        (aix_sighandle_frame_unwind): New global variable.
        (rs6000_aix_init_osabi): Install new frame unwinder.

2018-10-31  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/23835
        * common/common-defs.h: Don't redefine _FORTIFY_SOURCE if it's
        already defined.

2018-10-31  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * ppc-linux-nat.c: Include nat/linux-ptrace.h.

2018-10-31  Andrew Burgess  <andrew.burgess@embecosm.com>

        * dwarf2read.c (struct dwarf2_cu): Add producer_is_icc field.
        (producer_is_icc): New function.
        (check_producer): Set producer_is_icc field on dwarf2_cu.
        (dwarf2_init_integer_type): New function.
        (read_base_type): Call dwarf2_init_integer_type instead of
        init_integer_type in all cases.
        (dwarf2_cu::dwarf2_cu): Initialise producer_is_icc field.
        * valprint.c (maybe_negate_by_bytes): Add an assertion that the
        LEN is greater than 0.

2018-10-30  Tom Tromey  <tom@tromey.com>

        * main.c (captured_main_1): Check return value of bfd_init.

2018-10-29  Sergio Durigan Junior  <sergiodj@redhat.com>

        * common/offset-type.h (DEFINE_OFFSET_REL_OP): Delete.
        Adjust comments.

2018-10-29  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * procfs.c: Include common/pathstuff.h.

2018-10-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-linux-nat.c (riscv_linux_nat_target::fetch_registers):
        Add missing braces.  No functional change.

2018-10-27  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * macrocmd.c (info_macro_command): Use report_unrecognized_option_error
        to report a bad option and fix indentation.
        * demangle.c (demangle_command): Use report_unrecognized_option_error
        to report a bad option and correctly report the bad option.

2018-10-27  Tom Tromey  <tom@tromey.com>

        PR cli/23364:
        * darwin-nat.c (copied_shell): New global.
        (may_have_sip): Rename from should_disable_startup_with_shell.
        (copy_shell_to_cache, maybe_cache_shell): New functions.
        (darwin_nat_target::create_inferior): Update.  Use
        copied_shell.

2018-10-27  Tom Tromey  <tom@tromey.com>

        * unittests/scoped_fd-selftests.c (test_to_file): New function.
        (run_tests): Call test_to_file.
        * dwarf-index-write.c (write_psymtabs_to_index): Do not reopen
        temporary files.
        * common/scoped_fd.h (scoped_fd::to_file): New method.

2018-10-27  Tom Tromey  <tom@tromey.com>

        * unittests/scoped_mmap-selftests.c (test_normal): Use
        gdb_mkostemp_cloexec.
        * unittests/scoped_fd-selftests.c (test_destroy, test_release):
        Use gdb_mkostemp_cloexec.
        * gnulib/aclocal-m4-deps.mk, gnulib/aclocal.m4,
        gnulib/config.in, gnulib/configure,
        gnulib/import/Makefile.am, gnulib/import/Makefile.in,
        gnulib/import/m4/gnulib-cache.m4,
        gnulib/import/m4/gnulib-comp.m4: Update.
        * gnulib/import/m4/mkostemp.m4: New file.
        * gnulib/import/m4/mkstemp.m4: Remove.
        * gnulib/import/mkostemp.c: New file.
        * gnulib/import/mkstemp.m4: Remove.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Remove
        mkstemp, add mkostemp.  Apply new patch.
        * gnulib/import/stdlib.in.h: Apply patch.
        * gnulib/patches/0002-mkostemp-mkostemps-Fix-compilation-error-in-C-mode-o.patch:
        New file.
        * dwarf-index-write.c (write_psymtabs_to_index): Use
        gdb_mkostemp_cloexec.
        * common/filestuff.h (gdb_mkostemp_cloexec): New function.

2018-10-27  Tom Tromey  <tom@tromey.com>

        * unittests/mkdir-recursive-selftests.c: New file.
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/mkdir-recursive-selftests.c.
        * dwarf-index-cache.c (mkdir_recursive): Move to
        common/filestuff.c.
        (index_cache::store): Check return value of mkdir_recursive.
        (create_dir_and_check, test_mkdir_recursive): Move to new file.
        (_initialize_index_cache): Don't register test.
        * common/filestuff.h (mkdir_recursive): Declare.
        * common/filestuff.c (mkdir_recursive): Move from
        dwarf-index-cache.c.  Return bool.

2018-10-27  Tom Tromey  <tom@tromey.com>

        * dwarf-index-write.c (write_psymtabs_to_index): Move
        make_temp_filename to common/pathstuff.c.
        * common/pathstuff.h (make_temp_filename): Declare.
        * common/pathstuff.c (make_temp_filename): New function, moved
        from dwarf-index-write.c.

2018-10-27  Tom Tromey  <tom@tromey.com>

        * procfs.c (procfs_target::create_inferior): Use get_shell.
        * cli/cli-cmds.c (shell_escape): Use get_shell.
        * windows-nat.c (windows_nat_target::create_inferior): Use
        get_shell.
        * common/pathstuff.c (get_shell): New function.
        * nat/fork-inferior.c (SHELL_FILE, get_startup_shell): Remove.
        (fork_inferior): Use get_shell.
        * common/pathstuff.h (get_shell): Declare.

2018-10-27  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * NEWS: Mention changes to 'info [args|functions|locals|variables]'

2018-10-27  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * stack.c (print_variable_and_value_data): Add preg and treg.
        (print_frame_local_vars): Add quiet, regexp and t_regexp arguments,
        and update callers.
        (print_frame_arg_vars): Likewise.
        (prepare_reg): New function.
        (info_locals_command): Extract info print args and use them.
        (info_args_command): Likewise.
        (_initialize_stack): Modify on-line help.
        * symtab.c (treg_matches_sym_type_name): New function.
        (search_symbols): New arg t_regexp.
        (symtab_symbol_info): New args quiet, regexp, t_regexp.
        (info_variables_command): Extract info print args and use them.
        (info_functions_command): Likewise.
        (info_types_command): Update call to symtab_symbol_info.
        (_initialize_symtab): Modify on-line help.
        * symtab.h (treg_matches_sym_type_name): New function.
        (search_symbols): New t_regexp arg.

2018-10-27  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * cli-utils.c (extract_arg_maybe_quoted): New function.
        (extract_info_print_args): New function.
        (info_print_args_help): New function.
        (report_unrecognized_option_error): New function.
        * cli-utils.h (extract_arg_maybe_quoted): New function.
        (extract_info_print_args): New function.
        (info_print_args_help): New function.
        (report_unrecognized_option_error): New function.

2018-10-26  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (recursively_compute_inclusions): Use std::vector.
        (compute_compunit_symtab_includes): Update.
        * symtab.h: (symtab_ptr): Remove typedef.  Don't define a VEC.
        (compunit_symtab_ptr): Likewise.

2018-10-26  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (fbsd_print_auxv_entry): Only use
        default_print_auxv_entry for specific tag values.

2018-10-26  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_HWCAP2.

2018-10-26  Jim Wilson  <jimw@sifive.com>

        * riscv-linux-tdep.c: Include tramp-frame.h and trad-frame.h.
        (riscv_linux_sigframe_init): Declare.
        (RISCV_INST_LI_A7_SIGRETURN, RISCV_INT_ECALL): New.
        (riscv_linux_sigframe): New.
        (SIGFRAME_SIGINFO_SIZE, UCONTEXT_MCONTEXT_OFFSET): New.
        (riscv_linux_sigframe_init): Define.
        (riscv_linux_init_abi): Call tramp_frame_prepend_unwinder.

        * riscv-tdep.c (riscv_isa_xlen): Refer to riscv-tdep.h comment.
        (riscv_isa_flen): Likewise.  Drop static.
        * riscv-tdep.h (riscv_isa_xlen): Move riscv-tdep.c comment to here.
        (riscv_isa_flen): Likewise.  Declare.

2018-10-26  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
            Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_htm_vsx32l)
        (tdesc_powerpc_isa207_htm_vsx64l): Declare.
        * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TM_SPRREGSET)
        (PPC32_LINUX_SIZEOF_CGPRREGSET, PPC64_LINUX_SIZEOF_CGPRREGSET)
        (PPC_LINUX_SIZEOF_CFPRREGSET, PPC_LINUX_SIZEOF_CVMXREGSET)
        (PPC_LINUX_SIZEOF_CVSXREGSET, PPC_LINUX_SIZEOF_CPPRREGSET)
        (PPC_LINUX_SIZEOF_CDSCRREGSET, PPC_LINUX_SIZEOF_CTARREGSET):
        Define.
        (struct ppc_linux_features) <htm>: New field.
        (ppc_linux_no_features): Add initializer for htm field.
        * arch/ppc-linux-common.c (ppc_linux_match_description): Return
        new tdescs.
        * nat/ppc-linux.h (PPC_FEATURE2_HTM, NT_PPC_TM_CGPR)
        (NT_PPC_TM_CFPR, NT_PPC_TM_CVMX, NT_PPC_TM_CVSX)
        (NT_PPC_TM_SPR, NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR):
        Define if not already defined.
        * features/Makefile (WHICH): Add rs6000/powerpc-isa207-htm-vsx32l
        and rs6000/powerpc-isa207-htm-vsx64l.
        (XMLTOC): Add rs6000/powerpc-isa207-htm-vsx32l.xml and
        rs6000/powerpc-isa207-htm-vsx64l.xml.
        * features/rs6000/power-htm-spr.xml: New file.
        * features/rs6000/power-htm-core.xml: New file.
        * features/rs6000/power64-htm-core.xml: New file.
        * features/rs6000/power-htm-fpu.xml: New file.
        * features/rs6000/power-htm-altivec.xml: New file.
        * features/rs6000/power-htm-vsx.xml: New file.
        * features/rs6000/power-htm-ppr.xml: New file.
        * features/rs6000/power-htm-dscr.xml: New file.
        * features/rs6000/power-htm-tar.xml: New file.
        * features/rs6000/powerpc-isa207-htm-vsx32l.xml: New file.
        * features/rs6000/powerpc-isa207-htm-vsx64l.xml: New file.
        * features/rs6000/powerpc-isa207-htm-vsx32l.c: Generate.
        * features/rs6000/powerpc-isa207-htm-vsx64l.c: Generate.
        * regformats/rs6000/powerpc-isa207-htm-vsx32l.dat: Generate.
        * regformats/rs6000/powerpc-isa207-htm-vsx64l.dat: Generate.
        * ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
        fetch_regset with HTM regsets.
        (store_register, store_ppc_registers): Call store_regset with HTM
        regsets.
        (ppc_linux_nat_target::read_description): Set htm field in the
        features struct if needed.
        * ppc-linux-tdep.c: Include
        features/rs6000/powerpc-isa207-htm-vsx32l.c and
        features/rs6000/powerpc-isa207-htm-vsx64l.c.
        (ppc32_regmap_tm_spr, ppc32_regmap_cgpr, ppc64_le_regmap_cgpr)
        (ppc64_be_regmap_cgpr, ppc32_regmap_cfpr, ppc32_le_regmap_cvmx)
        (ppc32_be_regmap_cvmx, ppc32_regmap_cvsx, ppc32_regmap_cppr)
        (ppc32_regmap_cdscr, ppc32_regmap_ctar): New globals.
        (ppc32_linux_tm_sprregset, ppc32_linux_cgprregset)
        (ppc64_be_linux_cgprregset, ppc64_le_linux_cgprregset)
        (ppc32_linux_cfprregset, ppc32_le_linux_cvmxregset)
        (ppc32_be_linux_cvmxregset, ppc32_linux_cvsxregset)
        (ppc32_linux_cpprregset, ppc32_linux_cdscrregset)
        (ppc32_linux_ctarregset): New globals.
        (ppc_linux_cgprregset, ppc_linux_cvmxregset): New functions.
        (ppc_linux_collect_core_cpgrregset): New function.
        (ppc_linux_iterate_over_regset_sections): Call back with the htm
        regsets.
        (ppc_linux_core_read_description): Check if the tm spr section is
        present and set htm in the features struct.
        (_initialize_ppc_linux_tdep): Call
        initialize_tdesc_powerpc_isa207_htm_vsx32l and
        initialize_tdesc_powerpc_isa207_htm_vsx64l.
        * ppc-linux-tdep.h (ppc_linux_cgprregset, ppc_linux_cvmxregset):
        Declare.
        (ppc32_linux_tm_sprregset, ppc32_linux_cfprregset)
        (ppc32_linux_cvsxregset, ppc32_linux_cpprregset)
        (ppc32_linux_cdscrregset, ppc32_linux_ctarregset): Declare.
        * ppc-tdep.h (struct gdbarch_tdep) <have_htm_spr, have_htm_core>:
        New fields.
        <have_htm_fpu, have_htm_altivec, have_htm_vsx>:
        Likewise.
        <ppc_cppr_regnum, ppc_cdscr_regnum, ppc_ctar_regnum>: Likewise.
        <ppc_cdl0_regnum, ppc_cvsr0_regnum, ppc_cefpr0_regnum>: Likewise.
        (enum) <PPC_TFHAR_REGNUM, PPC_TEXASR_REGNUM, PPC_TFIAR_REGNUM>:
        New enum fields.
        <PPC_CR0_REGNUM, PPC_CCR_REGNUM, PPC_CXER_REGNUM>: Likewise.
        <PPC_CLR_REGNUM, PPC_CCTR_REGNUM, PPC_CF0_REGNUM>: Likewise.
        <PPC_CFPSCR_REGNUM, PPC_CVR0_REGNUM, PPC_CVSCR_REGNUM>: Likewise.
        <PPC_CVRSAVE_REGNUM, PPC_CVSR0_UPPER_REGNUM>: Likewise.
        <PPC_CPPR_REGNUM, PPC_CDSCR_REGNUM>: Likewise.
        <PPC_CTAR_REGNUM>: Likewise.
        (PPC_IS_TMSPR_REGNUM, PPC_IS_CKPTGP_REGNUM, PPC_IS_CKPTFP_REGNUM)
        (PPC_IS_CKPTVMX_REGNUM, PPC_IS_CKPTVSX_REGNUM): Define.
        * rs6000-tdep.c (IS_CDFP_PSEUDOREG, IS_CVSX_PSEUDOREG)
        (IS_CEFP_PSEUDOREG): Define.
        (rs6000_register_name): Hide the upper halves of checkpointed VSX
        registers.  Return names for the checkpointed DFP, VSX, and EFP
        pseudo registers.
        (rs6000_pseudo_register_type): Remove initial assert and raise an
        internal error in the else clause instead.  Return types for the
        checkpointed DFP, VSX, and EFP pseudo registers.
        (dfp_pseudo_register_read, dfp_pseudo_register_write): Handle
        checkpointed DFP pseudo registers.
        (vsx_pseudo_register_read, vsx_pseudo_register_write): Handle
        checkpointed VSX pseudo registers.
        (efp_pseudo_register_read, efp_pseudo_register_write): Rename
        from efpr_pseudo_register_read and
        efpr_pseudo_register_write.  Handle checkpointed EFP pseudo
        registers.
        (rs6000_pseudo_register_read, rs6000_pseudo_register_write):
        Handle checkpointed DFP, VSX, and EFP registers.
        (dfp_ax_pseudo_register_collect, vsx_ax_pseudo_register_collect)
        (efp_ax_pseudo_register_collect): New functions.
        (rs6000_ax_pseudo_register_collect): Move DFP, VSX and EFP pseudo
        register logic to new functions.  Handle checkpointed DFP, VSX,
        and EFP pseudo registers.
        (rs6000_gdbarch_init): Look for and validate the htm features.
        Include checkpointed DFP, VSX and EFP pseudo-registers.
        * NEWS: Mention access to PPR, DSCR, TAR, EBB/PMU registers and
        HTM registers.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * rs6000-tdep.c (rs6000_gdbarch_init): Reject tdescs with vsx but
        without altivec or fpu.

2018-10-26  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
            Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_EBBREGSET)
        (PPC_LINUX_SIZEOF_PMUREGSET): Declare.
        * nat/ppc-linux.h (PPC_FEATURE2_EBB, NT_PPC_EBB, NT_PPC_PMU):
        Define if not already defined.
        * features/rs6000/power-ebb.xml: New file.
        * features/rs6000/power-linux-pmu.xml: New file.
        * features/rs6000/powerpc-isa207-vsx32l.xml: Include ebb and pmu
        features.
        * features/rs6000/powerpc-isa207-vsx64l.xml: Likewise.
        * features/rs6000/powerpc-isa207-vsx32l.c: Re-generate.
        * features/rs6000/powerpc-isa207-vsx64l.c: Re-generate.
        * regformats/rs6000/powerpc-isa207-vsx32l.dat: Re-generate.
        * regformats/rs6000/powerpc-isa207-vsx64l.dat: Re-generate.
        * ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
        fetch_regset with ebb and pmu regsets.
        (store_register, store_ppc_registers): Call store_regset with ebb
        and pmu regsets.
        (ppc_linux_nat_target::read_description): Set isa207 field in the
        features struct if ebb and pmu are avaiable.
        * ppc-linux-tdep.c (ppc32_regmap_ebb, ppc32_regmap_pmu)
        (ppc32_linux_ebbregset, ppc32_linux_pmuregset): New globals.
        (ppc_linux_iterate_over_regset_sections): Call back with the ebb
        and pmu regsets.
        (ppc_linux_core_read_description): Check if the pmu section is
        present and set isa207 in the features struct.
        * ppc-linux-tdep.h (ppc32_linux_ebbregset)
        (ppc32_linux_pmuregset): Declare.
        * ppc-tdep.h (struct gdbarch_tdep) <ppc_mmcr0_regnum>: New field.
        <ppc_mmcr2_regnum, ppc_siar_regnum, ppc_sdar_regnum>: New fields.
        <ppc_sier_regnum>: New field.
        (enum): <PPC_BESCR_REGNUM, PPC_EBBHR_REGNUM, PPC_EBBRR_REGNUM>:
        New enum values.
        <PPC_MMCR0_REGNUM, PPC_MMCR2_REGNUM, PPC_SIAR_REGNUM>: New enum
        values.
        <PPC_SDAR_REGNUM, PPC_SIER_REGNUM>: New enum values.
        (PPC_IS_EBB_REGNUM, PPC_IS_PMU_REGNUM): Define.
        * rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate the
        ebb and pmu features.

2018-10-26  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
            Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_vsx32l)
        (tdesc_powerpc_isa207_vsx64l): Declare.
        * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TARREGSET): Define.
        (struct ppc_linux_features) <isa207>: New field.
        (ppc_linux_no_features): Add initializer for isa207 field.
        * arch/ppc-linux-common.c (ppc_linux_match_description): Return
        new tdescs.
        * nat/ppc-linux.h (PPC_FEATURE2_ARCH_2_07, PPC_FEATURE2_TAR)
        (NT_PPC_TAR): Define if not already defined.
        * features/Makefile (WHICH): Add rs6000/powerpc-isa207-vsx32l and
        rs6000/powerpc-isa207-vsx64l.
        (XMLTOC): Add rs6000/powerpc-isa207-vsx32l.xml and
        rs6000/powerpc-isa207-vsx64l.xml.
        * features/rs6000/power-tar.xml: New file.
        * features/rs6000/powerpc-isa207-vsx32l.xml: New file.
        * features/rs6000/powerpc-isa207-vsx64l.xml: New file.
        * features/rs6000/powerpc-isa207-vsx32l.c: Generate.
        * features/rs6000/powerpc-isa207-vsx64l.c: Generate.
        * regformats/rs6000/powerpc-isa207-vsx32l.dat: Generate.
        * regformats/rs6000/powerpc-isa207-vsx64l.dat: Generate.
        * ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
        fetch_regset with the TAR regset.
        (store_register, store_ppc_registers): Call store_regset with the
        TAR regset.
        (ppc_linux_nat_target::read_description): Set isa207 field in the
        features struct if needed.
        * ppc-linux-tdep.c: Include
        features/rs6000/powerpc-isa207-vsx32l.c and
        features/rs6000/powerpc-isa207-vsx64l.c.
        (ppc32_regmap_tar, ppc32_linux_tarregset): New globals.
        (ppc_linux_iterate_over_regset_sections): Call back with the tar
        regset.
        (ppc_linux_core_read_description): Check if the tar section is
        present and set isa207 in the features struct.
        (_initialize_ppc_linux_tdep): Call
        initialize_tdesc_powerpc_isa207_vsx32l and
        initialize_tdesc_powerpc_isa207_vsx64l.
        * ppc-linux-tdep.h (ppc32_linux_tarregset): Declare.
        * ppc-tdep.h (gdbarch_tdep) <ppc_tar_regnum>: New field.
        (enum) <PPC_TAR_REGNUM>: New enum value.
        * rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate tar
        feature.
        (ppc_process_record_op31): Record changes to TAR.

2018-10-26  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
            Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * arch/ppc-linux-tdesc.h (tdesc_powerpc_isa205_ppr_dscr_vsx32l)
        (tdesc_powerpc_isa205_ppr_dscr_vsx64l): Declare.
        * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_PPRREGSET)
        (PPC_LINUX_SIZEOF_DSCRREGSET): Define.
        (struct ppc_linux_features) <ppr_dscr>: New field.
        (ppc_linux_no_features): Add initializer for ppr_dscr field.
        * arch/ppc-linux-common.c (ppc_linux_match_description): Return
        new tdescs.
        * nat/ppc-linux.h (PPC_FEATURE2_DSCR, NT_PPC_PPR, NT_PPC_DSCR):
        Define if not already defined.
        * features/Makefile (WHICH): Add
        rs6000/powerpc-isa205-ppr-dscr-vsx32l and
        rs6000/powerpc-isa205-ppr-dscr-vsx64l.
        (XMLTOC): Add rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
        rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml.
        * features/rs6000/power-dscr.xml: New file.
        * features/rs6000/power-ppr.xml: New file.
        * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml: New file.
        * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml: New file.
        * features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Generate.
        * features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Generate.
        * regformats/rs6000/powerpc-isa205-ppr-dscr-vsx32l.dat: Generate.
        * regformats/rs6000/powerpc-isa205-ppr-dscr-vsx64l.dat: Generate.
        * ppc-linux-nat.c: Include <sys/uio.h>.
        (fetch_regset, store_regset, check_regset): New functions.
        (fetch_register, fetch_ppc_registers): Call fetch_regset with
        DSCR and PPR regsets.
        (store_register, store_ppc_registers): Call store_regset with
        DSCR and PPR regsets.
        (ppc_linux_get_hwcap2): New function.
        (ppc_linux_nat_target::read_description): Call
        ppc_linux_get_hwcap2 and check_regset, set ppr_dscr field in the
        features struct if needed.
        * ppc-linux-tdep.c: Include
        features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c and
        features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c.
        (ppc32_regmap_ppr, ppc32_regmap_dscr, ppc32_linux_pprregset)
        (ppc32_linux_dscrregset): New globals.
        (ppc_linux_iterate_over_regset_sections): Call back with the ppr
        and dscr regsets.
        (ppc_linux_core_read_description): Check if the ppr and dscr
        sections are present and set ppr_dscr in the features struct.
        (_initialize_ppc_linux_tdep): Call
        initialize_tdesc_powerpc_isa205_ppr_dscr_vsx32l and
        initialize_tdesc_powerpc_isa205_ppr_dscr_vsx64l.
        * ppc-linux-tdep.h (ppc32_linux_pprregset)
        (ppc32_linux_dscrregset): Declare.
        * ppc-tdep.h (struct gdbarch_tdep) <ppc_ppr_regnum>: New field.
        <ppc_dscr_regnum>: New field.
        (enum) <PPC_PPR_REGNUM, PPC_DSCR_REGNUM>: New enum values.
        * rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate ppr
        and dscr features.
        (ppc_process_record_op31): Record changes to PPR and DSCR.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * rs6000-tdep.c (rs6000_gdbarch_init): Replace line wrapping by a
        second initializer line for the have_* variables.  Initialize
        have_fpu to 0 instead of 1.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * arch/ppc-linux-common.c (ppc_linux_match_description):
        Parenthesize tdesc assignements and indent them properly.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * ppc-linux-nat.c (fetch_register): Change if statement to else
        if.
        (store_register): Likewise.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * rs6000-tdep.c: Remove reggroups.h include.
        (rs6000_pseudo_register_reggroup_p): Remove.
        (rs6000_gdbarch_init): Remove call to
        set_tdesc_pseudo_register_reggroup_p.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * reggroups.c (default_register_reggroup_p): Return true for
        decfloat registers and float_reggroup.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * ppc-linux-tdep.c (ppc_linux_collect_vrregset): Remove.
        (ppc32_le_linux_vrregset, ppc32_be_linux_vrregset): Replace
        ppc_linux_collect_vrregset by regcache_collect_regset.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * linux-tdep.c (linux_collect_regset_section_cb): Use
        std::vector<gdb_byte> instead of char * and malloc for buf.
        Remove xfree.

2018-10-26  Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>

        * xcoffread.c (read_xcoff_symtab): Pass deduced language to
        symtab_start instead of always using language_unknown.

2018-10-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_read_misa_reg): Update comment, remove
        READ_P parameter, catch and ignore register access errors from
        either the old or new MISA location.
        (riscv_has_feature): Update call to riscv_read_misa_reg.

2018-10-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * python/py-function.c (convert_values_to_python): Return
        gdbpy_ref<>.  Add header comment.
        (fnpy_call): Adjust.

2018-10-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * python/py-cmd.c (cmdpy_completer_helper): Return gdbpy_ref<>.
        (cmdpy_completer_handle_brkchars): Adjust.
        (cmdpy_completer): Adjust.

2018-10-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-linux-nat.c (riscv_linux_nat_target::fetch_registers):
        Pass correct regnum to raw_supply_zeroed.

2018-10-23  Hafiz Abid Qadeer  <abidh@codesourcery.com>

        * regcache.c (cooked_read_test): Add CSKY to the list of
        architectures with a save_reggroup

2018-10-23  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/23368
        * infrun.c (follow_exec): In the follow_exec_mode_new case,
        transfer terminal state from old new new inferior.
        * terminal.h (swap_terminal_info): New function.
        * inflow.c (swap_terminal_info): New function.

2018-10-23  Tom Tromey  <tom@tromey.com>

        * record-btrace.c (get_thread_current_frame_id): Rename from
        get_thread_current_frame.  Return a frame_id.
        (record_btrace_start_replaying): Update.

2018-10-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_register_name): Use the user-friendly names
        for CSRs.

2018-10-23  Joel Brobecker  <brobecker@adacore.com>

        * riscv-tdep.c (riscv_gdbarch_init): Set the gdbarch's
        have_nonsteppable_watchpoint attribute to 1.

2018-10-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_gdb_reg_names): Update comment, and all
        register names.
        (struct register_alias): Rename to...
        (struct riscv_register_alias): ...this, and update comment.
        (riscv_register_aliases): Update type, and alias names.  Remove
        CSR names from this list.
        (riscv_register_name): Use riscv_gdb_reg_names for int and float
        register names.  Add an extra assertion.
        (riscv_is_regnum_a_named_csr): New function.
        (riscv_register_reggroup_p): Use riscv_is_regnum_a_named_csr.

2018-10-23  John Darrington  <john@darrington.wattle.id.au>

        * configure.tgt: Add configuration for s12z.
        * s12z-tdep.c:  New file.
        * NEWS: Mention new target.

2018-10-22  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (riscv_push_dummy_call) <in_reg>: Check for value in
        FP reg smaller than FP reg size, and fill with -1 instead of 0.

        * riscv-tdep.c (riscv_fpreg_d_type, riscv_fpreg_q_type): New.
        (riscv_register_type): Use them.
        (riscv_print_one_register_info): Handle union of floats same as float.
        * riscv-tdep.h (struct gdbarch_tdep): Add riscv_fpreg_d_type and
        riscv_fpreg_q_type fields.

2018-10-21  Simon Marchi  <simon.marchi@ericsson.com>

        * gdbarch.sh (gdbarch_num_cooked_regs): New.
        * gdbarch.h: Re-generate.
        * ax-gdb.c (gen_expr): Use gdbarch_num_cooked_regs.
        * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
        * eval.c (evaluate_subexp_standard): Likewise.
        * findvar.c (value_of_register): Likewise.
        (value_of_register_lazy): Likewise.
        (address_from_register): Likewise.
        * frame.c (get_frame_register_bytes): Likewise.
        * gdbarch-selftests.c (register_to_value_test): Likewise.
        * h8300-tdep.c (h8300_register_type): Likewise.
        * i386-tdep.c (i386_dbx_reg_to_regnum): Likewise.
        (i386_svr4_reg_to_regnum): Likewise.
        * infcmd.c (default_print_registers_info): Likewise.
        (registers_info): Likewise.
        (print_vector_info): Likewise.
        (default_print_float_info): Likewise.
        * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
        * mdebugread.c (mdebug_reg_to_regnum): Likewise.
        * mi/mi-main.c (mi_cmd_data_list_register_names): Likewise.
        (mi_cmd_data_list_changed_registers): Likewise.
        (mi_cmd_data_list_register_values): Likewise.
        (mi_cmd_data_write_register_values): Likewise.
        (mi_cmd_trace_frame_collected): Likewise.
        * mips-tdep.c (print_gp_register_row): Likewise.
        (mips_print_registers_info): Likewise.
        * nds32-tdep.c (nds32_gdbarch_init): Likewise.
        * regcache.c (init_regcache_descr): Likewise.
        (register_size): Likewise.
        (register_dump::dump): Likewise.
        (cooked_read_test): Likewise.
        (cooked_write_test): Likewise.
        * rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
        (rs6000_gdbarch_init): Likewise.
        * stabsread.c (stab_reg_to_regnum): Likewise.
        * stack.c (info_frame_command): Likewise.
        * target-descriptions.c (tdesc_register_name): Likewise.
        * trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
        * tui/tui-regs.c (tui_show_register_group): Likewise.
        * user-regs.c (user_reg_map_name_to_regnum): Likewise.
        (user_reg_map_regnum_to_name): Likewise.
        (value_of_user_reg): Likewise.
        (maintenance_print_user_registers): Likewise.
        * xtensa-tdep.c (xtensa_find_register_by_name): Likewise.
        (xtensa_register_name): Likewise.
        (xtensa_register_type): Likewise.
        (xtensa_reg_to_regnum): Likewise.
        (xtensa_pseudo_register_read): Likewise.
        (xtensa_pseudo_register_write): Likewise.

2018-10-21  Simon Marchi  <simon.marchi@polymtl.ca>

        * amd64-tdep.c (amd64_pseudo_register_read_value): Use
        correctly-sized buffer with raw_read.
        (amd64_pseudo_register_write): Use correctly-sized buffer for
        raw_read/raw_write.

2018-10-19  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * typeprint.c (_initialize_typeprint): Fix wrong prefixname arg
        in add_prefix_cmd of set print type.

2018-10-19  Tom Tromey  <tom@tromey.com>

        PR tui/18388:
        * NEWS: Mention tabset deprecation.
        * tui/tui-win.c (tui_tab_width, internal_tab_width): New globals.
        (update_tab_width): New function.
        (tui_set_tab_width, tui_show_tab_width): New functions.
        (tui_set_tab_width_command): Use update_tab_width.
        (_initialize_tui_win): Move to end of file.  Deprecate "tabset".
        Add new "set tui tab-width" command.
        * tui/tui-source.c (tui_set_source_content): Update.
        * tui/tui-disasm.c (tui_set_disassem_content): Update.
        * tui/tui-data.h (tui_default_tab_len, tui_set_default_tab_len):
        Don't declare.
        (tui_tab_width): Declare.
        * tui/tui-data.c (default_tab_len, tui_default_tab_len)
        (tui_set_default_tab_len): Remove.

2018-10-19  Tom Tromey  <tom@tromey.com>

        * tui/tui-io.h (key_is_start_sequence, key_is_end_sequence)
        (key_is_backspace, tui_getc): Don't declare.
        * tui/tui-io.c (key_is_start_sequence): Now static.
        (key_is_end_sequence, key_is_backspace): Remove.
        (tui_getc): Now static.

2018-10-19  Tom Tromey  <tom@tromey.com>

        * symfile.c (reread_symbols): Clear "static_links".

2018-10-19  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-tdep.c (AARCH64_SIGCONTEXT_RESERVED_SIZE): New
        define.
        (aarch64_linux_sigframe_init): Extra boundary checks.

2018-10-19  Andreas Arnez  <arnez@linux.ibm.com>

        * s390-tdep.c (s390_pseudo_register_type): For v0-v15 don't yield
        the possibly non-existent tdesc type 'vec128', but the type of raw
        register v16 instead.

2018-10-19  Gary Benson <gbenson@redhat.com>

        * cli/cli-interp.c (cli_interp::~cli_interp): New function.

2018-10-18  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR cli/23785
        * cli/cli-dump.c (restore_binary_file): Check if "file" is
        NULL.

2018-10-17  Paul Koning  <paul_koning@dell.com>

        * charset.c (convert_between_encodings): Fix unsigned overflow.

2018-10-17  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_nat_target::info_proc) Use
        fbsd_info_proc_mappings_header and fbsd_info_proc_mappings_entry.
        * fbsd-tdep.c (fbsd_vm_map_entry_flags): Mark static.
        (fbsd_info_proc_mappings_header, fbsd_info_proc_mappings_entry):
        New functions.
        (fbsd_core_info_proc_mappings): Use fbsd_info_proc_mappings_header
        and fbsd_info_proc_mappings_header.
        * fbsd-tdep.h (fbsd_vm_map_entry_flags): Remove.
        (fbsd_info_proc_mappings_header, fbsd_info_proc_mappings_entry):
        New.

2018-10-17  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS (Responsible Maintainers): Add Rainer Orth as
        Solaris Maintainer.

2018-10-15  Tom Tromey  <tom@tromey.com>

        * tui/tui.c (strcat_to_buf): Remove casts.
        * tui/tui-winsource.c (tui_show_source_line)
        (tui_set_is_exec_point_at, tui_line_is_displayed): Remove casts.
        * tui/tui-wingeneral.c (tui_refresh_win, box_win): Remove casts.
        * tui/tui-windata.c (tui_first_data_item_displayed)
        (tui_delete_data_content_windows, tui_erase_data_content)
        (tui_display_all_data, tui_display_data_from)
        (tui_refresh_data_win, tui_vertical_data_scroll): Remove casts.
        * tui/tui-win.c (tui_set_win_height)
        (make_invisible_and_set_new_height, parse_scrolling_args): Remove
        casts.
        * tui/tui-win.c (tui_resize_all): Remove casts.
        (tui_scroll_backward_command, tui_set_focus)
        (tui_set_tab_width_command): Likewise.
        * tui/tui-source.c (tui_vertical_source_scroll): Remove cast.
        * tui/tui-regs.c (tui_show_register_group): Remove cast.
        * tui/tui-layout.c (tui_set_layout_by_name): Remove cast.
        * tui/tui-disasm.c (tui_vertical_disassem_scroll): Remove cast.
        * tui/tui-data.c (tui_partial_win_by_name, tui_free_win_content):
        Remove casts.

2018-10-15  Simon Marchi  <simon.marchi@ericsson.com>

        * MAINTAINERS (Responsible Maintainers): Add Alan Hayward as
        AArch64/ARM maintainer.

2018-10-11  Gary Benson <gbenson@redhat.com>

        * interps.h (interp::m_name): Make private and mutable.
        * interps.c (interp::~interp): Free m_name.

2018-10-10  Sergio Durigan Junior  <sergiodj@redhat.com>
            Simon Marchi <simark@simark.ca>

        * README (`configure' options): Add documentation for new
        "--enable-unit-tests" option.
        * acinclude.m4: Include "selftest.m4".
        * configure: Regenerate.
        * configure.ac: Use "GDB_AC_SELFTEST".
        * maint.c (maintenance_selftest): Update message informing
        that selftests have been disabled.
        (maintenance_info_selftests): Likewise.
        * selftest.m4: New file.

2018-10-10  Gary Benson <gbenson@redhat.com>

        * remote.c (remote_target::remote_send_printf): Add
        missing va_end found by Coverity.

2018-10-10  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (ftrace_update_function): Add indirect jump heuristic.

2018-10-09  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * sanitize.m4 (AM_GDB_UBSAN): Default to no.
        * NEWS: Update --enable-ubsan documentation.

2018-10-09  Gary Benson <gbenson@redhat.com>

        * dwarf2read.c (create_dwp_hash_table): Fix buffer overrun
        found by Coverity.

2018-10-08  Tom Tromey  <tom@tromey.com>

        * riscv-fbsd-tdep.c (riscv_fbsd_sigframe_init): Remove unused
        variable.
        (riscv_fbsd_init_abi): Likewise.

2018-10-08  Weimin Pan  <weimin.pan@oracle.com>
        * valops.c (value_struct_elt_for_reference): Rename local variable
        to work around the shadowing a previous local warning.

2018-10-08  John Baldwin  <jhb@FreeBSD.org>

        * Makefile.in (ALLDEPFILES): Add riscv-fbsd-nat.c.
        * NEWS: Mention new FreeBSD/riscv native configuration.
        * configure.host: Add riscv*-*-freebsd*.
        * configure.nat: Likewise.
        * riscv-fbsd-nat.c: New file.

2018-10-08  John Baldwin  <jhb@FreeBSD.org>

        * Makefile.in (ALL_TARGET_OBS): Add riscv-fbsd-tdep.o.
        (HFILES_NO_SRCDIR): Add riscv-fbsd-tdep.h.
        (ALLDEPFILES): Add riscv-fbsd-tdep.c.
        * NEWS: Mention new FreeBSD/riscv target.
        * configure.tgt: Add riscv*-*-freebsd*.
        * riscv-fbsd-tdep.c: New file.
        * riscv-fbsd-tdep.h: New file.

2018-10-08  John Baldwin  <jhb@FreeBSD.org>

        * regcache.h (struct regcache_map_entry): Note that this type can
        be used with traditional frame caches.
        * trad-frame.c (trad_frame_set_reg_regmap): New.
        * trad-frame.h (trad_frame_set_reg_regmap): New.

2018-10-08  Weimin Pan  <weimin.pan@oracle.com>

        PR c++/16841
        * valops.c (get_virtual_base_offset): New function.
        (value_struct_elt_for_reference): Use it to get virtual base offset
        and add it in calculating class member address.

2018-10-08  John Darrington  <john@darrington.wattle.id.au>

        * dwarf2read.c (dwarf2_cu) <producer_is_codewarrior>: New field.
        (check_producer): Check if the producer is codewarrior.
        (producer_is_codewarrior): New function.
        (lnp_state_machine::record_line): Ignore is_stmt flag for records
        produced by codewarrior.
        (dwarf2_cu::dwarf2_cu): Initialize producer_is_codewarrior.

2018-10-06  Tom Tromey  <tom@tromey.com>

        PR python/19399:
        * python/py-inferior.c: Add "architecture" entry.
        (infpy_architecture): New function.

2018-10-06  Tom Tromey  <tom@tromey.com>

        PR python/21765:
        * python/py-symbol.c (gdbpy_initialize_symbols): Redefine
        SYMBOL_VARIABLES_DOMAIN, SYMBOL_FUNCTIONS_DOMAIN,
        SYMBOL_TYPES_DOMAIN.  Define SYMBOL_MODULE_DOMAIN,
        SYMBOL_COMMON_BLOCK_DOMAIN, SYMBOL_LOC_COMMON_BLOCK.

2018-10-06  Tom Tromey  <tom@tromey.com>

        PR build/17077:
        * Makefile.in (OPCODES_CFLAGS): Remove "-I$(OPCODES_SRC)/..".
        * arc-tdep.c, frv-tdep.c, lm32-tdep.c, mep-tdep.c,
        microblaze-tdep.c, or1k-tdep.h: Use ../opcodes, not opcodes, in
        #include.

2018-10-06  Tom Tromey  <tom@tromey.com>

        * python/py-breakpoint.c (bppy_get_location): Handle a
        bp_breakpoint without a location.

2018-10-06  Tom Tromey  <tom@tromey.com>

        * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq)
        (_RegEx): Reformat help text.
        * python/lib/gdb/function/caller_is.py (CallerIs, CallerMatches)
        (AnyCallerIs, AnyCallerMatches): Reformat help text.
        * python/lib/gdb/function/as_string.py (_AsString): Reformat help
        text.
        * python/lib/gdb/command/xmethods.py (InfoXMethod)
        (EnableXMethod, DisableXMethod): Remove help indentation.
        Capitalize meta-syntactic variables.
        * python/lib/gdb/command/unwinders.py (InfoUnwinder)
        (EnableUnwinder, DisableUnwinder): Remove help indentation.
        Capitalize meta-syntactic variables.
        * python/lib/gdb/command/explore.py (ExploreCommand)
        (ExploreValueCommand, ExploreTypeCommand): Reformat help text.
        * python/lib/gdb/command/type_printers.py (InfoTypePrinter)
        (EnableTypePrinter, DisableTypePrinter): Remove help indentation.
        * python/lib/gdb/command/pretty_printers.py (InfoPrettyPrinter):
        Remove help indentation.
        (EnablePrettyPrinter, DisablePrettyPrinter): Likewise.
        * python/lib/gdb/command/frame_filters.py (EnableFrameFilter)
        (DisableFrameFilter, SetFrameFilterPriority)
        (ShowFrameFilterPriority, InfoFrameFilter): Reword help text.

2018-10-06  Tom Tromey  <tom@tromey.com>

        PR tui/28819:
        * tui/tui-io.c (gdb_wgetch): New function.
        (tui_mld_getc, tui_getc): Use it.

2018-10-05  Tom Tromey  <tom@tromey.com>

        * sol-thread.c (sol_thread_target::wait): Rename inner
        "save_ptid".

2018-10-04  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS): Add -Wshadow=local.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * guile/scm-frame.c (gdbscm_frame_read_var): Remove inner
        declaration of "block".

2018-10-04  Tom Tromey  <tom@tromey.com>

        * common/filestuff.c (fdwalk): Remove inner declaration of
        "result".

2018-10-04  Tom Tromey  <tom@tromey.com>

        * msp430-tdep.c (msp430_push_dummy_call): Rename inner
        "structs_addr" and hoist declaration.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * linux-tdep.c (linux_make_mappings_corefile_notes): Introduce new
        variable "size".

2018-10-04  Tom Tromey  <tom@tromey.com>

        * mdebugread.c (parse_partial_symbols): Use std::string.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * ctf.c (SET_ARRAY_FIELD): Rename "u32".
        * p-valprint.c (pascal_val_print): Split inner "i" variable.
        * xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
        header.
        * xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
        more inner scope.
        * xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
        * varobj.c (varobj_update): Rename inner "newobj",
        "type_changed".
        * valprint.c (generic_emit_char): Rename inner "buf".
        * valops.c (find_overload_match): Rename inner "temp".
        (value_struct_elt_for_reference): Declare "v" in more inner
        scope.
        * v850-tdep.c (v850_push_dummy_call): Rename "len".
        * unittests/array-view-selftests.c (run_tests): Rename inner
        "vec".
        * tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
        header.
        * tracepoint.c (merge_uploaded_trace_state_variables): Declare
        "tsv" in more inner scope.
        (print_one_static_tracepoint_marker): Rename inner
        "tuple_emitter".
        * tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
        (tic6x_push_dummy_call): Don't redeclare "addr".
        * target-float.c: Declare "dto" lower.
        * symtab.c (lookup_local_symbol): Rename inner "sym".
        (find_pc_sect_line): Rename inner "pc".
        * stack.c (print_frame): Don't redeclare "gdbarch".
        (return_command): Rename inner "gdbarch".
        * s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
        "sp".
        * rust-lang.c (rust_internal_print_type): Declare "i" in loop
        header.
        * rs6000-tdep.c (ppc_process_record): Rename inner "addr".
        * riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
        scope.
        * remote.c (remote_target::update_thread_list): Don't redeclare
        "tp".
        (remote_target::process_initial_stop_replies): Rename inner
        "thread".
        (remote_target::remote_parse_stop_reply): Don't redeclare "p".
        (remote_target::wait_as): Don't redeclare "stop_reply".
        (remote_target::get_thread_local_address): Rename inner
        "result".
        (remote_target::get_tib_address): Likewise.

        * regcache.c (cooked_read_test): Rename "regnum".
        * record-btrace.c (cmd_record_btrace_start): Rename inner
        "exception".
        * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Declare "i" in
        loop header.
        * ppc-linux-tdep.c (ppc_linux_syscall_record): Declare "i" in loop
        header.
        (ppu2spu_sniffer): Rename inner "buf".
        * parse.c (operator_check_standard): Rename inner "type",
        "objfile".
        * p-valprint.c (pascal_val_print): Introduce new scope for
        "low_bound", "high_bound".
        * p-exp.y (yylex): Declare "i" in loop header.
        * objfiles.c (objfile_relocate1): Declare "i" in loop header.
        Lower declaration of "s".
        * nios2-tdep.c (nios2_analyze_prologue): Declare "i" in loop
        header.
        (nios2_push_dummy_call): Rename "len".
        * nat/linux-osdata.c (linux_xfer_osdata_cpus): Rename static
        "buf".
        (linux_xfer_osdata_fds, linux_xfer_osdata_shm)
        (linux_xfer_osdata_sem, linux_xfer_osdata_msg)
        (linux_xfer_osdata_modules): Likewise.
        * mips-tdep.c (mips_eabi_push_dummy_call): Rename outer "len".
        (mips_n32n64_push_dummy_call, mips_o32_push_dummy_call)
        (mips_o64_push_dummy_call): Likewise.
        * microblaze-tdep.c (microblaze_analyze_prologue): Rename inner
        "op".
        * mi/mi-main.c (list_available_thread_groups): Rename inner
        "tuple_emitter".
        (mi_cmd_data_read_memory): Rename inner "opts".
        * mi/mi-cmd-var.c (varobj_update_one): Rename inner
        "tuple_emitter".
        * mep-tdep.c (mep_analyze_prologue): Declare "rn" in loop header.
        * mdebugread.c (parse_symbol): Rename inner "b".  Declare "f" in
        more inner scope.
        (parse_partial_symbols): Rename inner "pst", "p", "name"
        * main.c (captured_main_1): Rename inner "i"s.
        * machoread.c (macho_symfile_read_all_oso): Don't redeclare
        "oso2".
        * linux-tdep.c (linux_info_proc): Rename inner "filename".
        * linespec.c (linespec_lexer_lex_string): Rename inner "p".
        * infrun.c (handle_no_resumed): Don't redeclare "thread".
        (handle_signal_stop): Rename inner "gdbarch".
        (handle_command): Declare "signum" in loop header.
        * ia64-tdep.c (ia64_pseudo_register_read): Don't redeclare
        "status".
        (examine_prologue): Rename inner "sol" and "sof".
        (ia64_extract_return_value): Rename inner "val".  Declare another
        "val" in a more inner scope.
        * hppa-bsd-tdep.c (hppabsd_find_global_pointer): Declare "buf" in
        inner scope.
        * guile/scm-symbol.c (gdbscm_lookup_symbol): Rename inner
        "except".
        * findvar.c (default_read_var_value): Don't redeclare "addr".
        * f-exp.y (yylex): Declare "i" in loop header.
        * eval.c (evaluate_subexp_standard): Don't redeclare "type".
        Rename inner "type", "expect_type".
        (evaluate_subexp_for_sizeof): Rename inner "pc".
        * elfread.c (elf_symfile_read): Rename inner "abfd".
        * dwarf2read.c (read_debug_names_from_section): Don't redeclare
        "bytes_read".
        (process_psymtab_comp_unit_reader): Don't redeclare "gdbarch".
        (add_partial_subprogram): Rename inner "lowpc" and "highpc".
        (dwarf_decode_line_header): Rename inner "lh".
        * dwarf2loc.c (dwarf2_compile_expr_to_ax): Don't redeclare
        "offset".  Declare "i" in loop header.
        (disassemble_dwarf_expression): Rename inner "addr_size".
        * dwarf2expr.c (dwarf_expr_context::execute_stack_op): Rename
        inner "result".
        (dwarf_expr_context::execute_stack_op): Rename inner "offset".
        * dwarf2-frame.c (decode_frame_entry_1): Rename inner "length"s.
        * disasm.c (do_mixed_source_and_assembly_deprecated): Rename inner
        "inner_list_emitter".
        (do_mixed_source_and_assembly): Rename inner "tuple_emitter".
        * disasm-selftests.c (print_one_insn_test): Wrap "bplen"
        declaration in a block.
        * csky-tdep.c (csky_analyze_prologue): Declare "offset" lower.
        * cp-valprint.c (cp_print_value_fields): Don't redeclare
        "obstack_final_size".
        * cp-support.c (inspect_type): Declare "i" in loop header.
        * compile/compile.c (compile_instance::insert_symbol_error):
        Rename inner "e".
        * common/agent.c (agent_run_command): Remove inner "ret"
        declaration.
        * coffread.c (coff_symfile_read): Rename inner "name".
        (coff_symfile_read): Rename inner "abfd".
        * cli/cli-utils.c (get_number_trailer): Rename inner "val".
        * cli/cli-cmds.c (print_disassembly): Rename inner "low" and
        "high".
        * c-exp.y (lex_one_token): Move "len" declaration lower.
        * breakpoint.c (create_longjmp_master_breakpoint): Don't redeclare
        "gdbarch".
        (create_exception_master_breakpoint): Likewise.  Don't redeclare
        "b".
        (watch_command_1): Declare "mark" later.
        (clear_command): Don't shadow "a" or "b".
        (delete_command): Rename inner "b".
        (delete_trace_command): Likewise.
        * arm-tdep.c (thumb_process_displaced_32bit_insn): Rename inner
        "op".
        (arm_gdbarch_init): Remove inner "e_flags".
        * arch/arm-get-next-pcs.c (thumb_get_next_pcs_raw): Declare
        "offset" in inner blocks.

2018-10-04  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf-index-write.c (file_write): Don't write if the vector is
        empty.

2018-10-05  Tom de Vries  <tdevries@suse.de>

        * python/py-progspace.c (pspy_solib_name): Fix type mismatch in
        PyArg_ParseTuple call.

2018-10-05  Tom de Vries  <tdevries@suse.de>

        * python/py-record-btrace.c (recpy_bt_goto): Fix type mismatch in
        PyArg_ParseTuple call.

2018-10-04  Joel Brobecker  <brobecker@adacore.com>

        * psymtab.c (recursively_search_psymtabs): Reformat parameters
        to avoid exceeding 80 characters per line limit.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * symfile.c (syms_from_objfile_1, finish_new_objfile)
        (reread_symbols): Update.
        * complaints.h (clear_complaints): Remove argument.
        * complaints.c (enum complaint_series): Remove.
        (series): Remove global.
        (complaint_internal): Update.
        (clear_complaints): Remove argument.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * symfile.c (symbol_file_add_with_addrs): Do not print "no
        debugging symbols" message if there is a separate debug objfile.

2018-10-04  Tom Tromey  <tom@tromey.com>

        PR cli/19551:
        * symfile.c (symbol_file_add_with_addrs): Update output.
        * psymtab.c (require_partial_symbols): Update output.

2018-10-04  Tom Tromey  <tom@tromey.com>

        PR cli/22234:
        * complaints.c: Emit \n.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * symfile.c (symbol_file_add_with_addrs, symbol_file_clear)
        (separate_debug_file_exists, find_separate_debug_file)
        (add_symbol_file_command, reread_symbols, allocate_symtab)
        (allocate_compunit_symtab): Use filtered printing, not
        unfiltered.
        * psymtab.c (require_partial_symbols, dump_psymtab)
        (allocate_psymtab): Use filtered printing, not unfiltered.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * complaints.c (complaint_internal): Correctly check complaint
        count.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * complaints.h (struct complaints): Remove declaration.
        * complaints.c (clear_complaints): Remove an unused variable.

2018-10-04  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * MAINTAINERS (Write After Approval): Add self.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * guile/scm-value.c (gdbscm_value_to_string): Initialize
        "buffer_contents".
        * coffread.c (coff_symtab_read): Initialize "newobj".

2018-10-03  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.c (read_func_scope): Remove struct keyword in
        range-based for.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * README: Mention --enable-ubsan.
        * NEWS: Mention --enable-ubsan.
        * acinclude.m4: Include sanitize.m4.
        * configure: Rebuild.
        * configure.ac: Call AM_GDB_UBSAN.
        * sanitize.m4: New file.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * expression.h (enum exp_opcode): Use uint8_t as base type.
        * expprint.c (op_name): Handle invalid opcodes.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * parse.c (prefixify_expression): Add assert.
        (parse_exp_in_context_1): Throw exception if the expression is
        empty.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (read_signed_leb128): Work in ULONGEST.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * c-exp.y (parse_number): Work in unsigned.  Remove casts.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (read_subrange_type): Make "negative_mask"
        unsigned.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * findvar.c (extract_integer): Do work in an unsigned type.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * common/enum-flags.h (enum_flags::operator~): Add static assert.
        * symfile-add-flags.h (enum symfile_add_flag): Use unsigned as
        base type.
        * objfile-flags.h (enum objfile_flag): Use unsigned as base type.
        * gdbtypes.h (enum type_instance_flag_value): Use unsigned as base
        type.
        * c-lang.h (enum c_string_type_values): Use unsigned as base
        type.
        * btrace.h (enum btrace_thread_flag): Use unsigned as base type.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * dwarf2-frame.h (dwarf2_frame_state_reg_info)
        <~dwarf2_frame_state_reg_info>: Update.
        <dwarf2_frame_state_reg_info>: Update.
        <alloc_regs>: Add assertion.  Update.
        <reg>: Now a std::vector.
        <num_regs>: Remove.
        <swap>: Update.
        * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program)
        (execute_cfa_program_test, dwarf2_frame_cache): Update.

2018-10-03  Tom Tromey  <tom@tromey.com>

        * namespace.c (add_using_directive): Don't pass NULL to memcpy.

2018-10-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * tid-parse.c (tid_is_in_list): Fix wrong 'See' comment.

2018-10-02  Tom Tromey  <tom@tromey.com>

        * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Use pulongest.

2018-10-02  John Darrington  <john@darrington.wattle.id.au>

        * NEWS: Mention changed commands.
        * ser-uds.c: New file.
        * configure.ac (SER_HARDWIRE): Add ser-uds.o.
        * configure: Regenerate.
        * Makefile.in: Add new file.
        * serial.c (serial_open): Check if filename is a socket
        and lookup the appropriate interface accordingly.

2018-10-01  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-tdep.c (AARCH64_SIGCONTEXT_RESERVED_OFFSET): Add
        define.
        (AARCH64_EXTRA_MAGIC): Likewise.
        (AARCH64_FPSIMD_MAGIC): Likewise.
        (AARCH64_SVE_MAGIC): Likewise.
        (AARCH64_EXTRA_DATAP_OFFSET): Likewise.
        (AARCH64_FPSIMD_FPSR_OFFSET): Likewise.
        (AARCH64_FPSIMD_FPCR_OFFSET): Likewise.
        (AARCH64_FPSIMD_V0_OFFSET): Likewise.
        (AARCH64_FPSIMD_VREG_SIZE): Likewise.
        (AARCH64_SVE_CONTEXT_VL_OFFSET): Likewise.
        (AARCH64_SVE_CONTEXT_REGS_OFFSET): Likewise.
        (AARCH64_SVE_CONTEXT_P_REGS_OFFSET): Likewise.
        (AARCH64_SVE_CONTEXT_FFR_OFFSET): Likewise.
        (AARCH64_SVE_CONTEXT_SIZE): Likewise.
        (read_aarch64_ctx): Add function.
        (aarch64_linux_sigframe_init): Detect FP registers.

2018-10-01  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (AARCH64_Q0_REGNUM): Move to here.
        (AARCH64_D0_REGNUM): Likewise.
        (AARCH64_S0_REGNUM): Likewise.
        (AARCH64_H0_REGNUM): Likewise.
        (AARCH64_B0_REGNUM): Likewise.
        (AARCH64_SVE_V0_REGNUM): Likewise.
        * arch/aarch64.h (AARCH64_Q0_REGNUM): Move from here.
        (AARCH64_D0_REGNUM): Likewise.
        (AARCH64_S0_REGNUM): Likewise.
        (AARCH64_H0_REGNUM): Likewise.
        (AARCH64_B0_REGNUM): Likewise.
        (AARCH64_SVE_V0_REGNUM): Likewise.

2018-10-01  Gary Benson <gbenson@redhat.com>

        * gdb_proc_service.h (gdb_prfpregset_t): Remove typedef.
        * proc-service.c (ps_lgetfpregs, ps_lsetfpregs): Use
        prfpregset_t instead of gdb_prfpregset_t.
        * configure.ac (PRFPREGSET_T_BROKEN): Remove check.
        * configure, config.in: Rebuild.

2018-10-01  Gary Benson <gbenson@redhat.com>

        * common/gdb_proc_service.h: New file, factored out from...
        * gdb_proc_service.h: Moved common code to the above file.
        * Makefile.in (HFILES_NO_SRCDIR): Add the above new file.

2018-10-01  Gary Benson <gbenson@redhat.com>

        * gdb_proc_service.h: Use elf_gregset_t if prgregset_t is
        undefined.  Use elf_fpregset_t if prfpregset_t is undefined.

2018-10-01  Gary Benson <gbenson@redhat.com>

        * configure.ac: Check if sys/procfs.h defines elf_fpregset_t.
        (AC_CHECK_HEADERS): Check for linux/elf.h.
        * configure, config.in: Rebuild.
        * gdb_proc_service.h: Include linux/elf.h if sys/procfs.h
        doesn't define elf_fpregset_t.

2018-10-01  Gary Benson <gbenson@redhat.com>

        * gdb_proc_service.h: Whitespace change.

2018-10-01  Tom Tromey  <tom@tromey.com>

        * unittests/scoped_mmap-selftests.c: Don't check HAVE_UNISTD_H.
        * unittests/scoped_fd-selftests.c: Don't check HAVE_UNISTD_H.
        * common/scoped_fd.h: Don't check HAVE_UNISTD_H.

2018-10-01  Tom Tromey  <tom@tromey.com>

        * README: Minor change.

2018-09-30  Pedro Alves  <palves@redhat.com>

        * darwin-nat-info.c (darwin_debug_regions_recurse)
        (info_mach_exceptions_command): Remove unused local variables.
        * darwin-nat.c (darwin_decode_notify_message)
        (darwin_nat_target::resume, darwin_nat_target::mourn_inferior)
        (darwin_stop_inferior, darwin_setup_exceptions)
        (darwin_nat_target::kill, darwin_attach_pid, darwin_ptrace_him)
        (darwin_nat_target::attach, darwin_nat_target::detach)
        (darwin_read_write_inferior, darwin_read_dyld_info): Remove unused
        local variables.
        * i386-darwin-nat.c (i386_darwin_dr_set): Remove unused local
        variables.

2018-09-29  Tom Tromey  <tom@tromey.com>

        * README: Remove some leftover text.

2018-09-29  Tom Tromey  <tom@tromey.com>

        * PROBLEMS: Rewrite.
        * README: Update.

2018-09-28  John Baldwin  <jhb@FreeBSD.org>

        * disasm-selftests.c (print_one_insn_test): Add bfd_arch_riscv to
        case with explicit breakpoint kind.
        * riscv-tdep.c (show_use_compressed_breakpoints): Remove
        'additional_info' and related logic.
        (riscv_debug_breakpoints): New variable.
        (riscv_breakpoint_kind_from_pc): Use the length of the existing
        instruction to determine the breakpoint kind.
        (_initialize_riscv_tdep): Add 'set/show debug riscv breakpoints'
        flag.  Update description of 'set/show riscv
        use-compressed-breakpoints' flag.

2018-09-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        (NEWS): Mention changes to frame related commands.
        * cli/cli-decode.c (add_cmd_suppress_notification): New function.
        (add_prefix_cmd_suppress_notification): New function.
        (add_com_suppress_notification): Call
        add_cmd_suppress_notification.
        * command.h (add_cmd_suppress_notification): Declare.
        (add_prefix_cmd_suppress_notification): Declare.
        * mi/mi-cmd-stack.c: Add 'safe-ctype.h' include.
        (parse_frame_specification): Moved from stack.c, with
        simplification to handle a single argument.
        (mi_cmd_stack_select_frame): Use parse_frame_specification, the
        switch to the selected frame.  Add a header comment.
        * stack.c: Remove 'safe-ctype.h' include.
        (find_frame_for_function): Add declaration.
        (find_frame_for_address): New function.
        (parse_frame_specification): Moved into mi/mi-cmd-stack.c.
        (frame_selection_by_function_completer): New function.
        (info_frame_command): Rename to...
        (info_frame_command_core): ...this, and update parameter types.
        (select_frame_command): Rename to...
        (select_frame_command_core): ...this, and update parameter types.
        (frame_command): Rename to...
        (frame_command_core): ...this, and update parameter types.
        (class frame_command_helper): New class to wrap implementations of
        frame related sub-commands.
        (frame_apply_cmd_list): New static global.
        (frame_cmd_list): Make static.
        (select_frame_cmd_list): New global for sub-commands.
        (info_frame_cmd_list): New global for sub-commands.
        (_initialize_stack): Register sub-commands for 'frame',
        'select-frame', and 'info frame'.  Update 'frame apply' commands
        to use frame_apply_cmd_list.  Move function local static
        frame_apply_list to file static frame_apply_cmd_list for
        consistency.
        * stack.h (select_frame_command): Delete declarationn.
        (select_frame_for_mi): Declare new function.

2018-09-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_insn::decode): Decode c.lui.
        (riscv_scan_prologue): Split handling of AUIPC, LUI, ADD, ADDI,
        and NOP.

2018-09-26  Simon Marchi  <simon.marchi@ericsson.com>

        * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): Remove.

2018-09-26  Tom Tromey  <tom@tromey.com>

        * valops.c (auto_abandon): Remove dead code.

2018-09-26  Tom Tromey  <tom@tromey.com>

        * tui/tui-win.c (WIN_HEIGHT_USAGE): Remove extra ">"s.

2018-09-24  Tom Tromey  <tom@tromey.com>

        * common/pathstuff.c (get_standard_cache_dir): Make
        "xdg_cache_home" and "home" const.
        * top.c (init_history): Make "tmpenv" const.
        * main.c (get_init_files): Make "homedir" const.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/18852:
        * python/py-param.c (get_set_value): Use gdbpy_handle_exception.

2018-09-23  Tom Tromey  <tom@tromey.com>

        * python/py-function.c (fnpy_call): Use gdbpy_handle_exception.
        * python/py-cmd.c (cmdpy_function): Use gdbpy_handle_exception.
        * python/python-internal.h (gdbpy_handle_exception): Declare.
        * python/py-utils.c (gdbpy_handle_exception): New function.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/17284:
        * python/py-type.c (typy_template_argument): Check for negative
        argument number.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/14062:
        * python/python.c (gdbpy_run_events): Do not ignore exceptions.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/18170:
        * python/py-value.c (valpy_int): Allow conversion from pointer
        type.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/20126:
        * python/py-value.c (valpy_int): Respect type sign.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/18352;
        * python/py-value.c (valpy_float): Allow conversions from int or
        char.
        (valpy_int, valpy_long): Allow conversions from float.

2018-09-23  Tom Tromey  <tom@tromey.com>

        * ctf.c (ctf_start): Use gdb_fopen_cloexec.
        * common/scoped_mmap.c (mmap_file): Use gdb_open_cloexec.

2018-09-23  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * amd64-sol2-tdep.c (amd64_sol2_sigtramp_p): Also recognize
        __sighndlr.
        * i386-sol2-tdep.c (i386_sol2_sigtramp_p): Likewise.

2018-08-02  Jon Turney  <jon.turney@dronecode.org.uk>

        * windows-nat.c (windows_nat_target::wait): Remove a spurious
        target_terminal::ours().

2018-09-23  Simon Marchi  <simon.marchi@ericsson.com>

        * aarch64-linux-tdep.c (aarch64_linux_supply_sve_regset): Change type
        of vl to ULONGEST.

2018-09-21  Yacov Simhony  <ysimhony@gmail.com>

        * breakpoint.c (update_inserted_breakpoint_locations): Remove
        redundant condition.

2018-09-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * proc-utils.h (PROC_CTL_WORD_TYPE): Remove.

        * procfs.c: Don't check for PR_MODEL_NATIVE definition.
        * sparc-sol2-nat.c: Likewise.  Remove Linux, __arch64__ references.
        * sol-thread.c (ps_pdmodel): Don't guard definition.

        * procfs.c: Fix formatting.

        * procfs.c (sysset_t_alloc): Remove.
        (create_procinfo): Use XNEW instead of sysset_t_alloc.
        (procfs_debug_inferior): Likewise.
        (procfs_set_exec_trap): Likewise.
        (proc_set_traced_sysentry): Don't allocate argp dynamically.
        (proc_set_traced_sysexit): Likewise.

        * procfs.c (create_procinfo): Use xsnprintf to fix ARI warning.
        (dead_procinfo): Likewise.
        (proc_warn): Likewise.
        (proc_error): Likewise.
        (proc_get_LDT_entry): Likewise.
        (do_attach): Likewise.
        (procfs_target::pid_to_str): Likewise.
        (iterate_over_mappings): Likewise.

        * procfs.c (create_procinfo): Fix ARI warning.
        (proc_get_status): Likewise.
        (proc_stop_process): Likewise.
        (proc_run_process): Likewise.
        (proc_kill): Likewise.
        (proc_get_LDT_entry): Likewise.
        (procfs_find_LDT_entry): Likewise.
        (proc_update_threads): Likewise.
        (proc_iterate_over_threads): Likewise.
        (do_attach): Likewise.
        (procfs_xfer_memory): Likewise.
        (invalidate_cache): Likewise.
        (procfs_target::resume): Likewise.
        (procfs_init_inferior): Likewise.
        (procfs_set_exec_trap): Likewise.
        (procfs_target::thread_alive): Likewise.
        (procfs_target::pid_to_exec_file): Likewise.
        (iterate_over_mappings): Likewise.
        (procfs_target::make_corefile_notes): Likewise.
        * sol-thread.c (sol_thread_target::thread_alive): Likewise.

        * procfs.c (procfs_find_LDT_entry): Silence ARI warning.
        (procfs_find_LDT_entry): Likewise.
        * sol-thread.c (ps_lgetLDT): Likewise.

2018-09-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR tdep/17903
        * procfs.c (procfs_target): Declare pid_to_exec_file.
        (procfs_target::pid_to_exec_file): New.

2018-09-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * auxv.c (default_print_auxv_entry): Reflect AT_SUN_CAP_HW1
        renaming.
        Handle AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1,
        AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2.

2018-09-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * i386-v4-nat.c (regmap, supply_gregset, fill_gregset)
        (supply_fpregset, fill_fpregset): Move ...
        * i386-sol2-nat.c [PR_MODEL_NATIVE != PR_MODEL_LP64]: ... here.
        Remove HAVE_GREGSET_T, HAVE_FPREGET_T guards.
        Remove references to ioctl-based procfs.
        Include <sys/reg.h>.
        Remove PR_MODEL_NATIVE guards.
        * configure.nat <sol2, i386> (NATDEPFILES): Remove i386-v4-nat.o.
        * Makefile.in (ALLDEPFILES): Remove i386-v4-nat.c.

2018-09-19  Xavier Roirand  <roirand@adacore.com>

        PR gdb/20981:
        * solib-darwin.c (darwin_get_dyld_bfd): New function.
        (darwin_solib_get_all_image_info_addr_at_init): Update call.
        (darwin_solib_create_inferior_hook): Handle unrelocated dyld.

2018-09-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (fbsd_print_sockaddr_in): Style fix.
        (fbsd_print_sockaddr_in6): Likewise.

2018-09-19  Richard Bunt  <richard.bunt@arm.com>
            Chris January  <chris.january@arm.com>

        * eval.c (skip_undetermined_arglist): Skip argument list helper.
        (evaluate_subexp_standard): Return a dummy type when
        honoring EVAL_SKIP in OP_VAR_VALUE and handle skipping in the
        OP_F77_UNDETERMINED_ARGLIST case.
        * expression.h (enum noside): Update comment.

2018-09-19  George Vasick <george.vasick@oracle.com>

        * solib-svr4.c (svr4_same_1): Also handle amd64 ld.so.1.

2018-09-19  Stefan Teleman <stefan.teleman@oracle.com>
            April Chin <april.chin@oracle.com>
            Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * procfs.c (MAX_PROC_NAME_SIZE): Allow for 6-digit PID_MAX and
        uint_t lwpid_t.
        (create_procinfo): Print pids in /proc without leading zeros.

2018-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * nios2-tdep.c (nios2_gcc_target_options): New.
        (nios2_gdb_arch_init): Install new hook.

2018-09-18  Simon Marchi  <simon.marchi@ericsson.com>

        * patches/0001-Fix-PR-gdb-23558-Use-system-s-getcwd-when-cross-comp.patch:
        New file.
        * update-gnulib.sh: Apply patch.
        * configure: Re-generate.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * infcmd.c (_initialize_infcmd): Remove "running" from "info proc"
        description.  Make "info proc" command descriptions more
        consistent.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * NEWS: Mention 'info proc files' command.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_nat_target::info_proc): List open file
        descriptors for IP_FILES and IP_ALL.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (KF_FLAGS, KF_OFFSET, KF_VNODE_TYPE, KF_SOCK_DOMAIN)
        (KF_SOCK_TYPE, KF_SOCK_PROTOCOL, KF_SA_LOCAL, KF_SA_PEER)
        (KINFO_FILE_TYPE_SOCKET, KINFO_FILE_TYPE_PIPE)
        (KINFO_FILE_TYPE_FIFO, KINFO_FILE_TYPE_KQUEUE)
        (KINFO_FILE_TYPE_CRYPTO, KINFO_FILE_TYPE_MQUEUE)
        (KINFO_FILE_TYPE_SHM, KINFO_FILE_TYPE_SEM, KINFO_FILE_TYPE_PTS)
        (KINFO_FILE_TYPE_PROCDESC, KINFO_FILE_FD_TYPE_ROOT)
        (KINFO_FILE_FD_TYPE_JAIL, KINFO_FILE_FD_TYPE_TRACE)
        (KINFO_FILE_FD_TYPE_CTTY, KINFO_FILE_FLAG_READ)
        (KINFO_FILE_FLAG_WRITE, KINFO_FILE_FLAG_APPEND)
        (KINFO_FILE_FLAG_ASYNC, KINFO_FILE_FLAG_FSYNC)
        (KINFO_FILE_FLAG_NONBLOCK, KINFO_FILE_FLAG_DIRECT)
        (KINFO_FILE_FLAG_HASLOCK, KINFO_FILE_FLAG_EXEC)
        (KINFO_FILE_VTYPE_VREG, KINFO_FILE_VTYPE_VDIR)
        (KINFO_FILE_VTYPE_VCHR, KINFO_FILE_VTYPE_VLNK)
        (KINFO_FILE_VTYPE_VSOCK, KINFO_FILE_VTYPE_VFIFO, FBSD_AF_UNIX)
        (FBSD_AF_INET, FBSD_AF_INET6, FBSD_SOCK_STREAM, FBSD_SOCK_DGRAM)
        (FBSD_SOCK_SEQPACKET, FBSD_IPPROTO_ICMP, FBSD_IPPROTO_TCP)
        (FBSD_IPPROTO_UDP, FBSD_IPPROTO_SCTP): New defines.
        (struct fbsd_sockaddr_in, struct fbsd_sockaddr_in6)
        (struct fbsd_sockaddr_un): New types.
        (fbsd_file_fd, fbsd_file_type, fbsd_file_flags, fbsd_ipproto)
        (fbsd_print_sockaddr_in, fbsd_print_sockaddr_in6)
        (fbsd_info_proc_files_header, fbsd_info_proc_files_entry)
        (fbsd_core_info_proc_files): New functions.
        (fbsd_core_info_proc): List open file descriptors for IP_FILES and
        IP_ALL.
        * fbsd-tdep.h (fbsd_info_proc_files_header)
        (fbsd_info_proc_files_entry): New.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * defs.h (enum info_proc_what) [IP_FILES]: New value.
        * infcmd.c (info_proc_cmd_files): New function.
        (_initialize_infcmd): Register 'info proc files' command.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * gnulib/aclocal-m4-deps.mk: Re-generate.
        * gnulib/aclocal.m4: Re-generate.
        * gnulib/config.in: Re-generate.
        * gnulib/configure: Re-generate.
        * gnulib/import/Makefile.am: Re-generate.
        * gnulib/import/Makefile.in: Re-generate.
        * gnulib/import/m4/gnulib-cache.m4: Re-generate.
        * gnulib/import/m4/gnulib-comp.m4: Re-generate.
        * gnulib/import/arpa_inet.in.h: New file.
        * gnulib/import/inet_ntop.c: New file.
        * gnulib/import/m4/arpa_inet_h.m4: New file.
        * gnulib/import/m4/inet_ntop.m4: New file.
        * gnulib/import/m4/netinet_in_h.m4: New file.
        * gnulib/import/m4/socklen.m4: New file.
        * gnulib/import/m4/sockpfaf.m4: New file.
        * gnulib/import/m4/stdalign.m4: New file.
        * gnulib/import/m4/sys_uio_h.m4: New file.
        * gnulib/import/netinet_in.in.h: New file.
        * gnulib/import/stdalign.in.h: New file.
        * gnulib/import/sys_socket.c: New file.
        * gnulib/import/sys_socket.in.h: New file.
        * gnulib/import/sys_uio.in.h: New file.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add inet_ntop
        module.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * gnulib/aclocal-m4-deps.mk: New file.
        * gnulib/update-gnulib.sh: Generate "aclocal-m4-deps.mk"
        deterministically.

2018-09-18  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (fbsd_core_vnode_path): Use KF_PATH instead of
        KVE_PATH.

2018-09-18  Tom Tromey  <tom@tromey.com>

        * compile/compile-object-load.c (struct
        link_hash_table_cleanup_data): Add constructor and destructor.
        Use DISABLE_COPY_AND_ASSIGN.
        (~link_hash_table_cleanup_data): Rename from
        link_hash_table_free.  Now a destructor.
        (copy_sections): Use gdb::unique_xmalloc_ptr.  Remove cleanups.

2018-09-18  Tom Tromey  <tom@tromey.com>

        * compile/compile-object-run.c (do_module_cleanup): Use delete.
        * compile/compile-object-load.c (struct munmap_list): Move to
        header file.
        (munmap_list::add): Rename from munmap_list_add; rewrite.
        (munmap_list::~munmap_list): Rename from munmap_list_free.
        (munmap_listp_free_cleanup): Remove.
        (compile_object_load): Update.
        * compile/compile-object-load.h (struct munmap_list): Move from
        compile-object-load.c.  Rewrite.

2018-09-18  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (pass_in_v): Use register size.
        (aarch64_extract_return_value): Likewise.
        (aarch64_store_return_value): Likewise.

2018-09-18  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * utils.c (dump_core) [HAVE_SETRLIMIT]: Cast RLIM_INFINITY to
        rlim_t.

2018-09-17  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * python/lib/gdb/command/frame_filters.py (EnableFrameFilter):
        Fix short help line.

2018-09-17  Tom Tromey  <tom@tromey.com>

        PR python/20445:
        * configure: Rebuild.
        * configure.ac: Conditionally use -DNDEBUG for Python.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * configure.ac: Use gmp as a library dependency when checking for
        mpfr.

2018-09-17  Pedro Alves  <palves@redhat.com>

        * python/py-inferior.c (find_inferior_object): Delete.

2018-09-17  Simon Marchi  <simon.marchi@ericsson.com>

        * compile/compile-cplus-types.c
        (compile_cplus_instance::enter_scope): Don't use new_scope after
        std::move.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * common/pathstuff.c (get_standard_cache_dir): Use
        ~/Library/Caches on macOS.
        * common/pathstuff.h (get_standard_cache_dir): Update comment.

2018-09-17  Simon Marchi  <simon.marchi@polymtl.ca>

        PR python/23669
        * breakpoint.c (commands_cmd_element): New.
        (_initialize_breakpoint): Assign commands_cmd_element.
        * breakpoint.h (commands_cmd_element): New.
        * cli/cli-script.c (while_cmd_element, if_command,
        define_cmd_element): New.
        (command_name_equals): Remove.
        (process_next_line): Compare commands by pointer, not by name.
        (_initialize_cli_script): Assign the various cmd_list_element
        variables.
        * compile/compile.c (compile_cmd_element): New.
        (_initialize_compile): Assign compile_cmd_element.
        * compile/compile.h (compile_cmd_element): New.
        * guile/guile.c (guile_cmd_element): New.
        (install_gdb_commands): Assign guile_cmd_element.
        * guile/guile.h (guile_cmd_element): New.
        * python/python.c (python_cmd_element): New.
        (_initialize_python): Assign python_cmd_element.
        * python/python.h (python_cmd_element): New.
        * tracepoint.c (while_stepping_cmd_element): New.
        (_initialize_tracepoint): Assign while_stepping_cmd_element.
        * tracepoint.h (while_stepping_cmd_element): New.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * infrun.c (save_infcall_suspend_state): Return
        infcall_suspend_state_up.
        (save_infcall_control_state): Return infcall_control_state_up.
        * inferior.h (save_infcall_suspend_state)
        (save_infcall_control_state): Declare later.  Return unique
        pointers.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * infrun.c (struct stop_context): Declare constructor,
        destructor, "changed" method.
        (stop_context::stop_context): Rename from save_stop_context.
        (stop_context::~stop_context): Rename from
        release_stop_context_cleanup.
        (normal_stop): Update.
        (stop_context::changed): Rename from stop_context_changed.  Return
        bool.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * inferior.h (struct infcall_suspend_state_deleter): New.
        (infcall_suspend_state_up): New typedef.
        (struct infcall_control_state_deleter): New.
        (infcall_control_state_up): New typedef.
        (make_cleanup_restore_infcall_suspend_state)
        (make_cleanup_restore_infcall_control_state): Don't declare.
        * infcall.c (call_function_by_hand_dummy): Update.
        * infrun.c (do_restore_infcall_suspend_state_cleanup)
        (make_cleanup_restore_infcall_suspend_state): Remove.
        (do_restore_infcall_control_state_cleanup)
        (make_cleanup_restore_infcall_control_state): Remove.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * gdbthread.h (struct thread_control_state): Add initializer.
        (class thread_info) <control>: Remove initializer.
        * inferior.h (struct inferior_control_state): Add initializer.
        (class inferior) <control>: Remove initializer.
        (exit_inferior_1): Update.
        * infrun.c (struct infcall_control_state): Add constructors.
        (save_infcall_control_state): Use new.
        (restore_infcall_control_state, discard_infcall_control_state):
        Use delete.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * infrun.c (struct infcall_suspend_state) <registers>: Now a
        unique_ptr.
        <siginfo_data>: Now a unique_xmalloc_ptr.
        (save_infcall_suspend_state, restore_infcall_suspend_state)
        (discard_infcall_suspend_state)
        (get_infcall_suspend_state_regcache): Update.

2018-09-17  Tom Tromey  <tom@tromey.com>

        * gdbthread.h (struct thread_suspend_state): Add initializers.
        (class thread_info) <suspend>: Remove initializer.
        * infrun.c (struct infcall_suspend_state): Add initializers.
        (save_infcall_suspend_state): Use new.
        (discard_infcall_suspend_state): Use delete.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
        Remove.
        * python/py-varobj.c (py_varobj_iter_ctor): Change pyiter to
        rvalue reference.  Remove CPYCHECKER_STEALS_REFERENCE_TO_ARG.
        (py_varobj_iter_new): Likewise.
        (py_varobj_get_iterator): Use gdbpy_ref.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/py-threadevent.c (py_get_event_thread): Simplify.
        * python/py-inferior.c (infpy_thread_from_thread_handle):
        Return immediately after calling thread_to_thread_object.  Use
        Py_RETURN_NONE.
        (thread_to_thread_object): Set the exception on a NULL return.

2018-09-16  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in (LIBGDB_OBS): Sort COMMON_OBS.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
        Remove.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/python-internal.h (thread_to_thread_object): Change
        return type.
        * python/py-inferior.c (thread_to_thread_object): Return a new
        reference.
        (infpy_thread_from_thread_handle): Update.
        * python/py-infthread.c (gdbpy_selected_thread): Update.
        * python/py-stopevent.c (create_stop_event_object): Update.
        * python/py-threadevent.c (py_get_event_thread): Return a new
        reference.
        (py_get_event_thread): Update.
        * python/py-event.h (py_get_event_thread): Change return type.
        * python/py-continueevent.c (create_continue_event_object):
        Update.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/py-progspace.c (pspy_get_objfiles): Update.
        * python/python-internal.h (objfile_to_objfile_object): Change
        return type.
        * python/py-newobjfileevent.c (create_new_objfile_event_object):
        Update.
        * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers):
        Update.
        * python/python.c (gdbpy_get_current_objfile): Update.
        (gdbpy_objfiles): Update.
        * python/py-objfile.c (objfpy_get_owner, gdbpy_lookup_objfile):
        Update.
        (objfile_to_objfile_object): Return a new reference.
        * python/py-symtab.c (stpy_get_objfile): Update.
        * python/py-prettyprint.c (find_pretty_printer_from_objfiles):
        Update.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/py-inferior.c (infpy_get_progspace): Update.
        * python/python-internal.h (pspace_to_pspace_object): Change
        return type.
        * python/py-newobjfileevent.c
        (create_clear_objfiles_event_object): Update.
        * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers):
        Update.
        * python/python.c (gdbpy_get_current_progspace): Update.
        (gdbpy_progspaces): Update.
        * python/py-progspace.c (pspace_to_pspace_object): Return a new
        reference.
        * python/py-objfile.c (objfpy_get_progspace): Update.
        * python/py-prettyprint.c (find_pretty_printer_from_progspace):
        Update.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * python/lib/gdb/__init__.py (current_progspace, objfiles)
        (solib_name, block_for_pc, find_pc_line): New functions.
        (execute_unwinders): Update.
        * python/py-block.c (gdbpy_block_for_pc): Remove.
        * python/py-inferior.c (infpy_get_progspace): New function.
        (inferior_object_getset) <progspace>: Add.
        * python/py-progspace.c (pspy_objfiles): Rewrite.
        (pspy_solib_name, pspy_block_for_pc)
        (pspy_find_pc_line, pspy_is_valid): New functions.
        (progspace_object_methods): Add entries for solib_name,
        block_for_pc, find_pc_line, is_valid.
        * python/python-internal.h (gdbpy_block_for_pc)
        (build_objfiles_list): Don't declare.
        * python/python.c: Don't include solib.h.
        (gdbpy_solib_name, gdbpy_find_pc_line)
        (gdbpy_get_current_progspace, build_objfiles_list)
        (gdbpy_objfiles): Remove.
        (GdbMethods) <current_progspace, objfiles, block_for_pc,
        solib_name, find_pc_line>: Remove entries.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * top.c (new_ui_command): Use GNU style for metasyntactic
        variables.
        * breakpoint.c (stopat_command): Use GNU style for metasyntactic
        variables.
        * maint.c (maintenance_translate_address): Remove "<>" around
        text.
        * interps.c (interpreter_exec_cmd): Use GNU style for
        metasyntactic variables.
        * nto-procfs.c (nto_procfs_target_info): Use GNU style for
        metasyntactic variables.
        * tracepoint.c (tfind_range_command): Use GNU style for
        metasyntactic variables.
        (tfind_outside_command): Likewise.
        (_initialize_tracepoint): Likewise.
        * remote.c (extended_remote_target::create_inferior): Use GNU
        style for metasyntactic variables.
        * sparc64-tdep.c (adi_examine_command): Use GNU style for
        metasyntactic variables.
        (adi_assign_command): Likewise.

2018-09-16  Tom Tromey  <tom@tromey.com>

        * disasm.c (show_disassembler_options_sfunc): Use GNU style for
        metasyntactic variables.  Print message if no disassembler options
        are available.

2018-09-15  Tom Tromey  <tom@tromey.com>

        * infcmd.c (get_inferior_args): Return const char *.
        * inferior.h (get_inferior_args): Return type now const.
        * linux-tdep.c (linux_fill_prpsinfo): Update.
        * procfs.c (procfs_target::make_corefile_notes): Update.

2018-09-07  Tom Tromey  <tom@tromey.com>

        * python/python.c (execute_gdb_command): Call bpstat_do_actions
        inside the TRY.

2018-09-14  Sandra Loosemore  <sandra@codesourcery.com>

        * nios2-tdep.c (nios2_type_align): New.
        (nios2_gdb_arch_init): Install type_align hook.

2018-09-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * eval.c (fake_method::fake_method): Call xzalloc directly for a
        type that is neither object file owned, nor gdbarch owned.
        * gdbtypes.c (get_type_gdbarch): Add an assert that returned
        gdbarch is non-NULL.
        (alloc_type_instance): Allocate non-objfile owned types on the
        gdbarch obstack.
        (copy_type_recursive): Allocate TYPE_FIELDS and TYPE_RANGE_DATA
        using TYPE_ALLOC to ensure memory is allocated on the correct
        obstack.
        * gdbtypes.h (TYPE_ALLOC): Allocate space on either the objfile
        obstack, or the gdbarch obstack.
        (TYPE_ZALLOC): Rewrite using TYPE_ALLOC.

2018-09-14  Tom Tromey  <tom@tromey.com>

        * infcall.c (call_function_by_hand_dummy): Remove unnecessary
        block.

2018-09-14  Tom Tromey  <tom@tromey.com>

        * nat/fork-inferior.c (get_startup_shell): Remove "static".

2018-09-13  Tom Tromey  <tom@tromey.com>

        * python/py-inferior.c (infpy_thread_from_thread_handle): Now
        static.

2018-09-13  Tom Tromey  <tom@tromey.com>

        * exec.c (try_open_exec_file): Use std::string.

2018-09-13  Tom Tromey  <tom@tromey.com>

        * utils.h (gdb_bfd_errmsg): Return std::string.
        * exec.c (exec_file_attach): Update.
        * compile/compile-object-load.c (compile_object_load): Update.
        * utils.c (gdb_bfd_errmsg): Return std::string.

2018-09-13  Tom Tromey  <tom@tromey.com>

        * procfs.c (struct procinfo_deleter): New.
        (procinfo_up): New typedef.
        (do_destroy_procinfo_cleanup): Remove.
        (procfs_target::info_proc): Use procinfo_up.  Remove cleanups.

2018-09-13  Tom Tromey  <tom@tromey.com>

        * source.c (add_path): Use gdb::unique_xmalloc_ptr.

2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>
2018-09-13  Tom Tromey  <tom@tromey.com>

        * python/py-progspace.c (PSPY_REQUIRE_VALID): New macro.
        (pspy_get_objfiles): New function.
        (progspace_object_methods): New.
        (pspace_object_type): Add tp_methods callback.
        * python/python-internal.h (build_objfiles_list): New
        declaration.
        * python/python.c (build_objfiles_list): New function.
        (gdbpy_objfiles): Implement using build_objfiles_list.
        * NEWS: Mention the Progspace.objfiles method.

2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>

        * python/py-inferior.c (infpy_get_progspace): New function.
        (inferior_object_getset): Add progspace property.
        * NEWS: Mention the new property.

2018-09-13  Tom Tromey  <tom@tromey.com>

        PR rust/23650:
        * rust-lang.c (rust_evaluate_subexp): Use field name, not "foo".

2018-09-13  Tom Tromey  <tom@tromey.com>

        PR rust/23626:
        * rust-lang.c (rust_enum_variant): Now static.
        (rust_empty_enum_p): New function.
        (rust_print_enum, rust_evaluate_subexp, rust_print_struct_def):
        Handle empty enum.

2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>

        * python/py-inferior.c (infpy_repr): New.
        (inferior_object_type): Register infpy_repr.
        * python/py-objfile.c (objfpy_repr): New.
        (objfile_object_type): Register objfpy_repr.

2018-09-12  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_nat_target::info_proc): Remove unused variable.

2018-09-12  John Baldwin  <jhb@FreeBSD.org>

        * aarch64-fbsd-tdep.h (AARCH64_FBSD_SIZEOF_GREGSET): Fix comment
        typo.

2018-09-12  Sergio Durigan Junior  <sergiodj@redhat.com>

        * common/common-utils.c: Don't include '<sys/stat.h>'.
        (is_regular_file): Move to...
        * common/filestuff.c (is_regular_file): ... here.
        * common/common-utils.h (is_regular_file): Move to...
        * common/filestuff.h (is_regular_file): ... here.

2018-09-12  Simon Marchi  <simon.marchi@ericsson.com>

        * skip.c (debug_skip): New variable.
        (skiplist_entry::do_skip_file_p): Add debug output.
        (skiplist_entry::do_skip_gfile_p): Likewise.
        (skiplist_entry::skip_function_p): Likewise.
        (_initialize_step_skip): Create debug command.
        * NEWS: Mention set/show debug skip.

2018-09-11  Xavier Roirand  <roirand@adacore.com>

        * darwin-nat.c (should_disable_startup_with_shell):
        New function.
        (darwin_nat_target::create_inferior): Add call.

2018-09-11  Xavier Roirand  <roirand@adacore.com>

        * darwin-nat.h (struct darwin_thread_info) <gdb_port,
        inf_port, msg_state>: Initialize.
        (struct darwin_thread_info) <signaled, single_step>: Change
        type and initialize.
        (struct darwin_thread_info) <event>: Initialize.

2018-09-10  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/23555
        PR gdb/23558
        * gnulib/import/m4/getcwd-path-max.m4: Add cross-compilation
        guesses.

2018-09-10  Sergio Durigan Junior  <sergiodj@redhat.com>

        Revert:
        2018-08-29  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/23555
        PR gdb/23558
        * gnulib/aclocal.m4: Regenerate.
        * gnulib/config.in: Regenerate.
        * gnulib/configure: Regenerate.
        * gnulib/import/Makefile.am: Update.
        * gnulib/import/Makefile.in: Update.
        * gnulib/import/extra/snippet/_Noreturn.h: Rename to...
        * gnulib/import/_Noreturn.h: ... this.
        * gnulib/import/alloca.in.h: Update.
        * gnulib/import/extra/snippet/arg-nonnull.h: Rename to...
        * gnulib/import/arg-nonnull.h: ... this.
        * gnulib/import/assure.h: Update.
        * gnulib/import/at-func.c: Update.
        * gnulib/import/basename-lgpl.c: Update.
        * gnulib/import/extra/snippet/c++defs.h: Rename to...
        * gnulib/import/c++defs.h: ... this.
        * gnulib/import/canonicalize-lgpl.c: Update.
        * gnulib/import/cdefs.h: Update.
        * gnulib/import/chdir-long.c: Update.
        * gnulib/import/chdir-long.h: Update.
        * gnulib/import/cloexec.c: Update.
        * gnulib/import/cloexec.h: Update.
        * gnulib/import/close.c: Update.
        * gnulib/import/closedir.c: Update.
        * gnulib/import/config.charset: Update.
        * gnulib/import/dirent-private.h: Update.
        * gnulib/import/dirent.in.h: Update.
        * gnulib/import/dirfd.c: Update.
        * gnulib/import/dirname-lgpl.c: Update.
        * gnulib/import/dirname.h: Update.
        * gnulib/import/dosname.h: Update.
        * gnulib/import/dup-safer-flag.c: Update.
        * gnulib/import/dup-safer.c: Update.
        * gnulib/import/dup.c: Update.
        * gnulib/import/dup2.c: Update.
        * gnulib/import/errno.in.h: Update.
        * gnulib/import/error.c: Update.
        * gnulib/import/error.h: Update.
        * gnulib/import/exitfail.c: Update.
        * gnulib/import/exitfail.h: Update.
        * gnulib/import/extra/update-copyright: Update.
        * gnulib/import/fchdir.c: Update.
        * gnulib/import/fcntl.c: Update.
        * gnulib/import/fcntl.in.h: Update.
        * gnulib/import/fd-hook.c: Update.
        * gnulib/import/fd-hook.h: Update.
        * gnulib/import/fd-safer-flag.c: Update.
        * gnulib/import/fd-safer.c: Update.
        * gnulib/import/fdopendir.c: Update.
        * gnulib/import/filename.h: Update.
        * gnulib/import/filenamecat-lgpl.c: Update.
        * gnulib/import/filenamecat.h: Update.
        * gnulib/import/flexmember.h: Update.
        * gnulib/import/float+.h: Update.
        * gnulib/import/float.c: Update.
        * gnulib/import/float.in.h: Update.
        * gnulib/import/fnmatch.c: Update.
        * gnulib/import/fnmatch.in.h: Update.
        * gnulib/import/fnmatch_loop.c: Update.
        * gnulib/import/fpucw.h: Update.
        * gnulib/import/frexp.c: Update.
        * gnulib/import/frexpl.c: Update.
        * gnulib/import/fstat.c: Update.
        * gnulib/import/fstatat.c: Update.
        * gnulib/import/getcwd-lgpl.c: Update.
        * gnulib/import/getcwd.c: Update.
        * gnulib/import/getdtablesize.c: Update.
        * gnulib/import/getlogin_r.c: Update.
        * gnulib/import/getprogname.c: Update.
        * gnulib/import/getprogname.h: Update.
        * gnulib/import/gettext.h: Update.
        * gnulib/import/gettimeofday.c: Update.
        * gnulib/import/glob-libc.h: Update.
        * gnulib/import/glob.c: Update.
        * gnulib/import/glob.in.h: Update.
        * gnulib/import/glob_internal.h: Update.
        * gnulib/import/glob_pattern_p.c: Update.
        * gnulib/import/globfree.c: Update.
        * gnulib/import/hard-locale.c: Update.
        * gnulib/import/hard-locale.h: Update.
        * gnulib/import/intprops.h: Update.
        * gnulib/import/inttypes.in.h: Update.
        * gnulib/import/isnan.c: Update.
        * gnulib/import/isnand-nolibm.h: Update.
        * gnulib/import/isnand.c: Update.
        * gnulib/import/isnanl-nolibm.h: Update.
        * gnulib/import/isnanl.c: Update.
        * gnulib/import/itold.c: Update.
        * gnulib/import/libc-config.h: Update.
        * gnulib/import/limits.in.h: Update.
        * gnulib/import/localcharset.c: Update.
        * gnulib/import/localcharset.h: Update.
        * gnulib/import/localtime-buffer.c: Update.
        * gnulib/import/localtime-buffer.h: Update.
        * gnulib/import/lstat.c: Update.
        * gnulib/import/m4/00gnulib.m4: Update.
        * gnulib/import/m4/__inline.m4: Update.
        * gnulib/import/m4/absolute-header.m4: Update.
        * gnulib/import/m4/alloca.m4: Update.
        * gnulib/import/m4/builtin-expect.m4: Update.
        * gnulib/import/m4/canonicalize.m4: Update.
        * gnulib/import/m4/chdir-long.m4: Update.
        * gnulib/import/m4/close.m4: Update.
        * gnulib/import/m4/closedir.m4: Update.
        * gnulib/import/m4/configmake.m4: Update.
        * gnulib/import/m4/d-ino.m4: Update.
        * gnulib/import/m4/d-type.m4: Update.
        * gnulib/import/m4/dirent_h.m4: Update.
        * gnulib/import/m4/dirfd.m4: Update.
        * gnulib/import/m4/dirname.m4: Update.
        * gnulib/import/m4/double-slash-root.m4: Update.
        * gnulib/import/m4/dup.m4: Update.
        * gnulib/import/m4/dup2.m4: Update.
        * gnulib/import/m4/eealloc.m4: Update.
        * gnulib/import/m4/environ.m4: Update.
        * gnulib/import/m4/errno_h.m4: Update.
        * gnulib/import/m4/error.m4: Update.
        * gnulib/import/m4/exponentd.m4: Update.
        * gnulib/import/m4/exponentl.m4: Update.
        * gnulib/import/m4/extensions.m4: Update.
        * gnulib/import/m4/extern-inline.m4: Update.
        * gnulib/import/m4/fchdir.m4: Update.
        * gnulib/import/m4/fcntl-o.m4: Update.
        * gnulib/import/m4/fcntl.m4: Update.
        * gnulib/import/m4/fcntl_h.m4: Update.
        * gnulib/import/m4/fdopendir.m4: Update.
        * gnulib/import/m4/filenamecat.m4: Update.
        * gnulib/import/m4/flexmember.m4: Update.
        * gnulib/import/m4/float_h.m4: Update.
        * gnulib/import/m4/fnmatch.m4: Update.
        * gnulib/import/m4/fnmatch_h.m4: Update.
        * gnulib/import/m4/fpieee.m4: Update.
        * gnulib/import/m4/frexp.m4: Update.
        * gnulib/import/m4/frexpl.m4: Update.
        * gnulib/import/m4/fstat.m4: Update.
        * gnulib/import/m4/fstatat.m4: Update.
        * gnulib/import/m4/getcwd-abort-bug.m4: Update.
        * gnulib/import/m4/getcwd-path-max.m4: Update.
        * gnulib/import/m4/getcwd.m4: Update.
        * gnulib/import/m4/getdtablesize.m4: Update.
        * gnulib/import/m4/getlogin.m4: Update.
        * gnulib/import/m4/getlogin_r.m4: Update.
        * gnulib/import/m4/getpagesize.m4: Update.
        * gnulib/import/m4/getprogname.m4: Update.
        * gnulib/import/m4/gettimeofday.m4: Update.
        * gnulib/import/m4/glibc21.m4: Update.
        * gnulib/import/m4/glob.m4: Update.
        * gnulib/import/m4/glob_h.m4: Update.
        * gnulib/import/m4/gnulib-cache.m4: Update.
        * gnulib/import/m4/gnulib-common.m4: Update.
        * gnulib/import/m4/gnulib-comp.m4: Update.
        * gnulib/import/m4/gnulib-tool.m4: Update.
        * gnulib/import/m4/hard-locale.m4: Update.
        * gnulib/import/m4/include_next.m4: Update.
        * gnulib/import/m4/inttypes-pri.m4: Update.
        * gnulib/import/m4/inttypes.m4: Update.
        * gnulib/import/m4/isnand.m4: Update.
        * gnulib/import/m4/isnanl.m4: Update.
        * gnulib/import/m4/largefile.m4: Update.
        * gnulib/import/m4/limits-h.m4: Update.
        * gnulib/import/m4/localcharset.m4: Update.
        * gnulib/import/m4/locale-fr.m4: Update.
        * gnulib/import/m4/locale-ja.m4: Update.
        * gnulib/import/m4/locale-zh.m4: Update.
        * gnulib/import/m4/localtime-buffer.m4: Update.
        * gnulib/import/m4/longlong.m4: Update.
        * gnulib/import/m4/lstat.m4: Update.
        * gnulib/import/m4/malloc.m4: Update.
        * gnulib/import/m4/malloca.m4: Update.
        * gnulib/import/m4/math_h.m4: Update.
        * gnulib/import/m4/mbrtowc.m4: Update.
        * gnulib/import/m4/mbsinit.m4: Update.
        * gnulib/import/m4/mbsrtowcs.m4: Update.
        * gnulib/import/m4/mbstate_t.m4: Update.
        * gnulib/import/m4/memchr.m4: Update.
        * gnulib/import/m4/memmem.m4: Update.
        * gnulib/import/m4/mempcpy.m4: Update.
        * gnulib/import/m4/memrchr.m4: Update.
        * gnulib/import/m4/mkdir.m4: Update.
        * gnulib/import/m4/mkstemp.m4: Update.
        * gnulib/import/m4/mmap-anon.m4: Update.
        * gnulib/import/m4/mode_t.m4: Update.
        * gnulib/import/m4/msvc-inval.m4: Update.
        * gnulib/import/m4/msvc-nothrow.m4: Update.
        * gnulib/import/m4/multiarch.m4: Update.
        * gnulib/import/m4/nocrash.m4: Update.
        * gnulib/import/m4/off_t.m4: Update.
        * gnulib/import/m4/onceonly.m4: Update.
        * gnulib/import/m4/open-cloexec.m4: Update.
        * gnulib/import/m4/open.m4: Update.
        * gnulib/import/m4/openat.m4: Update.
        * gnulib/import/m4/opendir.m4: Update.
        * gnulib/import/m4/pathmax.m4: Update.
        * gnulib/import/m4/rawmemchr.m4: Update.
        * gnulib/import/m4/readdir.m4: Update.
        * gnulib/import/m4/readlink.m4: Update.
        * gnulib/import/m4/realloc.m4: Update.
        * gnulib/import/m4/rename.m4: Update.
        * gnulib/import/m4/rewinddir.m4: Update.
        * gnulib/import/m4/rmdir.m4: Update.
        * gnulib/import/m4/save-cwd.m4: Update.
        * gnulib/import/m4/secure_getenv.m4: Update.
        * gnulib/import/m4/setenv.m4: Update.
        * gnulib/import/m4/signal_h.m4: Update.
        * gnulib/import/m4/ssize_t.m4: Update.
        * gnulib/import/m4/stat-time.m4: Update.
        * gnulib/import/m4/stat.m4: Update.
        * gnulib/import/m4/std-gnu11.m4: Update.
        * gnulib/import/m4/stdbool.m4: Update.
        * gnulib/import/m4/stddef_h.m4: Update.
        * gnulib/import/m4/stdint.m4: Update.
        * gnulib/import/m4/stdio_h.m4: Update.
        * gnulib/import/m4/stdlib_h.m4: Update.
        * gnulib/import/m4/strchrnul.m4: Update.
        * gnulib/import/m4/strdup.m4: Update.
        * gnulib/import/m4/strerror.m4: Update.
        * gnulib/import/m4/string_h.m4: Update.
        * gnulib/import/m4/strstr.m4: Update.
        * gnulib/import/m4/strtok_r.m4: Update.
        * gnulib/import/m4/sys_socket_h.m4: Update.
        * gnulib/import/m4/sys_stat_h.m4: Update.
        * gnulib/import/m4/sys_time_h.m4: Update.
        * gnulib/import/m4/sys_types_h.m4: Update.
        * gnulib/import/m4/tempname.m4: Update.
        * gnulib/import/m4/time_h.m4: Update.
        * gnulib/import/m4/unistd-safer.m4: Update.
        * gnulib/import/m4/unistd_h.m4: Update.
        * gnulib/import/m4/warn-on-use.m4: Update.
        * gnulib/import/m4/wchar_h.m4: Update.
        * gnulib/import/m4/wchar_t.m4: Update.
        * gnulib/import/m4/wctype_h.m4: Update.
        * gnulib/import/m4/wint_t.m4: Update.
        * gnulib/import/malloc.c: Update.
        * gnulib/import/malloc/scratch_buffer.h: Update.
        * gnulib/import/malloc/scratch_buffer_grow.c: Update.
        * gnulib/import/malloc/scratch_buffer_grow_preserve.c: Update.
        * gnulib/import/malloc/scratch_buffer_set_array_size.c: Update.
        * gnulib/import/malloca.c: Update.
        * gnulib/import/malloca.h: Update.
        * gnulib/import/malloca.valgrind: Update.
        * gnulib/import/math.in.h: Update.
        * gnulib/import/mbrtowc.c: Update.
        * gnulib/import/mbsinit.c: Update.
        * gnulib/import/mbsrtowcs-impl.h: Update.
        * gnulib/import/mbsrtowcs-state.c: Update.
        * gnulib/import/mbsrtowcs.c: Update.
        * gnulib/import/memchr.c: Update.
        * gnulib/import/memmem.c: Update.
        * gnulib/import/mempcpy.c: Update.
        * gnulib/import/memrchr.c: Update.
        * gnulib/import/mkdir.c: Update.
        * gnulib/import/mkstemp.c: Update.
        * gnulib/import/msvc-inval.c: Update.
        * gnulib/import/msvc-inval.h: Update.
        * gnulib/import/msvc-nothrow.c: Update.
        * gnulib/import/msvc-nothrow.h: Update.
        * gnulib/import/open.c: Update.
        * gnulib/import/openat-die.c: Update.
        * gnulib/import/openat-priv.h: Update.
        * gnulib/import/openat-proc.c: Update.
        * gnulib/import/openat.c: Update.
        * gnulib/import/openat.h: Update.
        * gnulib/import/opendir.c: Update.
        * gnulib/import/pathmax.h: Update.
        * gnulib/import/pipe-safer.c: Update.
        * gnulib/import/rawmemchr.c: Update.
        * gnulib/import/readdir.c: Update.
        * gnulib/import/readlink.c: Update.
        * gnulib/import/realloc.c: Update.
        * gnulib/import/ref-add.sin: Update.
        * gnulib/import/ref-del.sin: Update.
        * gnulib/import/rename.c: Update.
        * gnulib/import/rewinddir.c: Update.
        * gnulib/import/rmdir.c: Update.
        * gnulib/import/same-inode.h: Update.
        * gnulib/import/save-cwd.c: Update.
        * gnulib/import/save-cwd.h: Update.
        * gnulib/import/scratch_buffer.h: Update.
        * gnulib/import/secure_getenv.c: Update.
        * gnulib/import/setenv.c: Update.
        * gnulib/import/signal.in.h: Update.
        * gnulib/import/stat-time.c: Update.
        * gnulib/import/stat-time.h: Update.
        * gnulib/import/stat-w32.c: Update.
        * gnulib/import/stat-w32.h: Update.
        * gnulib/import/stat.c: Update.
        * gnulib/import/stdbool.in.h: Update.
        * gnulib/import/stddef.in.h: Update.
        * gnulib/import/stdint.in.h: Update.
        * gnulib/import/stdio.in.h: Update.
        * gnulib/import/stdlib.in.h: Update.
        * gnulib/import/str-two-way.h: Update.
        * gnulib/import/strchrnul.c: Update.
        * gnulib/import/strdup.c: Update.
        * gnulib/import/streq.h: Update.
        * gnulib/import/strerror-override.c: Update.
        * gnulib/import/strerror-override.h: Update.
        * gnulib/import/strerror.c: Update.
        * gnulib/import/string.in.h: Update.
        * gnulib/import/stripslash.c: Update.
        * gnulib/import/strnlen1.c: Update.
        * gnulib/import/strnlen1.h: Update.
        * gnulib/import/strstr.c: Update.
        * gnulib/import/strtok_r.c: Update.
        * gnulib/import/sys_stat.in.h: Update.
        * gnulib/import/sys_time.in.h: Update.
        * gnulib/import/sys_types.in.h: Update.
        * gnulib/import/tempname.c: Update.
        * gnulib/import/tempname.h: Update.
        * gnulib/import/time.in.h: Update.
        * gnulib/import/unistd--.h: Update.
        * gnulib/import/unistd-safer.h: Update.
        * gnulib/import/unistd.in.h: Update.
        * gnulib/import/unsetenv.c: Update.
        * gnulib/import/verify.h: Update.
        * gnulib/import/extra/snippet/warn-on-use.h: Update.
        * gnulib/import/wchar.in.h: Update.
        * gnulib/import/wctype.in.h: Update.
        * gnulib/import/xalloc-oversized.h: Update.
        * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
        "53e2c179f26a890fa6685af4b6c1397ee370433b".

2018-09-10  Simon Marchi  <simon.marchi@ericsson.com>

        * record-btrace.c (get_thread_current_frame): Remove
        old_inferior_ptid.

2018-09-10  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_value_struct_elt): Call ada_to_fixed_type
        with check_tag to 1 if and only if the type is tagged and the
        component being searched cannot been found in the current
        view. Otherwise, always call ada_to_fixed_type with
        check_tag to 0.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * ada-lang.c (ada_is_access_to_unconstrained_array): Remove static
        declaration.
        * ada-lang.h: add ada_is_access_to_unconstrained_array prototype.
        * ada-varobj.c (ada_varobj_get_number_of_children,
        ada_varobj_describe_child, ada_value_is_changeable_p): Cleanup code.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * ada-valprint.c (ada_value_print): Use type instead of
        enclosing type.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * ada-lang.c (ada_value_subscript): Handle case when parameter is
        an array of access to unconstrained array.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * ada-lang.c (ada_is_access_to_unconstrained_array): New function.
        (ada_check_typedef): Use it.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * ada-varobj.c (ada_varobj_describe_struct_child)
        (ada_varobj_describe_child): Handle union case like struct one.

2018-09-10  Tom Tromey  <tom@tromey.com>

        PR python/18380:
        * python/python.c (_initialize_python): Make example in "python"
        help work in Python 3.

2018-09-10  Eli Zaretskii  <eliz@gnu.org>

        * Makefile.in (transformed_name): Use INSTALL_SCRIPT instead of
        INSTALL_PROGRAM to install gdb-add-index.sh.  Don't append
        $(EXEEXT) to the script, as it is not a program.

2018-09-09  Simon Marchi  <simon.marchi@ericsson.com>

        * python/py-prettyprint.c (pretty_print_one_value): Return
        gdbpy_ref<>.
        (print_string_repr): Adjust.
        (apply_varobj_pretty_printer): Return gdbpy_ref<>.
        * python/python-internal.h (apply_varobj_pretty_printer): Return
        gdbpy_ref<>.
        * varobj.c (varobj_value_get_print_value): Adjust.

2018-09-08  Tom Tromey  <tom@tromey.com>

        PR python/16047:
        * python/py-prettyprint.c (pretty_print_one_value): Check for
        to_string method.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (resolve_subexp): Pass correct OPLEN in call to
        replace_operator_with_call.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_value_cast): Remove unnecessary parentheses.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-typeprint.c (print_range): Print the bounds using TYPE
        rather than its TYPE_TARGET_TYPE.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_to_fixed_value): Minor reformatting in
        call to ada_to_fixed_value_create.

2018-09-08  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_decode): strip dot prefix in symbol name.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_exception_sal): Replace gdb_assert calls
        by calls to error.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_unhandled_exception_name_addr_from_raise):
        Move update of loop variable "fi".

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (value_assign_to_component): In the case of
        big-endian targets, extract the bits of the given VAL
        using an src_offset of zero if container is not a scalar.

2018-09-06  Simon Ser  <contact@emersion.fr>

        PR gdb/23105
        * fbsd-nat.c (fbsd_nat_target::xfer_partial): Add support for
        TARGET_OBJECT_FREEBSD_VMMAP and TARGET_OBJECT_FREEBSD_PS_STRINGS.
        * fbsd-tdep.c (fbsd_make_note_desc): New.
        (fbsd_make_corefile_notes): Write NT_PROCSTAT_AUXV,
        NT_PROCSTAT_VMMAP and NT_PROCSTAT_PS_STRINGS notes.
        * target.h (enum target_object) Add FreeBSD-specific
        TARGET_OBJECT_FREEBSD_VMMAP and TARGET_OBJECT_FREEBSD_PS_STRINGS.

2018-09-06  Simon Marchi  <simon.marchi@ericsson.com>

        * compile/compile-c.h (generate_c_for_variable_locations):
        Change reference to pointer.
        * compile/compile-c-support.c (compile_program) <compute>:
        Likewise.
        * compile/compile-c-symbols.c (generate_vla_size): Likewise.
        (generate_c_for_for_one_variable): Likewise
        (generate_c_for_variable_locations): Likewise
        * compile/compile-c-types.c (compile_c_instance::convert_type):
        Likewise
        * compile/compile-cplus-symbols.c (convert_one_symbol):
        std::move the scope passed to enter_scope.
        * compile/compile-cplus-types.c
        (compile_cplus_instance::enter_scope): Make parameter
        rvalue-reference.
        (compile_cplus_instance::new_scope): Change reference to
        pointer.
        (compile_cplus_instance::convert_type): Likewise
        (compile_cplus_convert_typedef): std::move the scope passed to
        enter_scope.
        (compile_cplus_convert_struct_or_union): Likewise.
        (compile_cplus_convert_enum): Likewise.
        (compile_cplus_convert_namespace): Likewise.
        * compile/compile-cplus.h (compile_cplus_instance)
        <enter_scope>: Make parameter rvalue-reference.
        * compile/compile-internal.h (compile_instance)
        <get_cached_type>: Likewise
        * compile/compile-loc2c.c (push): Likewise
        (pushf): Likewise
        (unary): Likewise
        (binary): Likewise
        (print_label): Likewise
        (pushf_register_address): Likewise
        (pushf_register): Likewise
        (do_compile_dwarf_expr_to_c): Likewise
        (compile_dwarf_expr_to_c): Likewise
        (compile_dwarf_bounds_to_c): Likewise
        * compile/compile.c (compile_instance::get_cached_type):
        Likewise
        * compile/compile.h (compile_dwarf_expr_to_c): Likewise.
        (compile_dwarf_bounds_to_c): Likewise
        * dwarf2loc.c (locexpr_generate_c_location): Likewise.
        (dwarf2_compile_property_to_c): Likewise
        * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise
        * symtab.h (struct symbol_computed_ops) <generate_c_location>:
        Likewise

2018-09-06  Simon Marchi  <simon.marchi@ericsson.com>

        * tui/tui-data.h (struct tui_win_element) <highlight>: Remove.
        * tui/tui-data.c (init_content_element): Don't initialize it.

2018-09-06  Simon Marchi  <simon.marchi@ericsson.com>

        * tui/tui-data.h (struct tui_win_info)
        <detail::opaque>: Remove.
        * tui/tui-data.c (init_win_info): Remove assignment.

2018-09-05  Tom Tromey  <tom@tromey.com>

        * warning.m4 (AM_GDB_WARNINGS): Add -Wformat when testing
        -Wformat-nonliteral.
        * target-float.c (host_float_ops<T>::to_string)
        (host_float_ops<T>::from_string): Use
        DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
        * configure: Rebuild.

2018-09-05  Simon Marchi  <simon.marchi@ericsson.com>

        * printcmd.c (printf_c_string): Use
        DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
        (printf_wide_c_string, printf_pointer, ui_printf): Likewise.

2018-09-05  Tom Tromey  <tom@tromey.com>

        * cli/cli-cmds.c (shell_escape, edit_command): Remove cast.

2018-09-05  Tom de Vries  <tdevries@suse.de>

        * dwarf2loc.c (sect_variable_value): Call indirect_synthetic_pointer
        with resolve_abstract_p == true.
        (indirect_synthetic_pointer): Add resolve_abstract_p parameter,
        defaulting to false. Propagate resolve_abstract_p to
        dwarf2_fetch_die_loc_sect_off.
        * dwarf2loc.h (dwarf2_fetch_die_loc_sect_off): Add resolve_abstract_p
        parameter, defaulting to false.
        * dwarf2read.c (read_variable): Add variable to abstract_to_concrete.
        (dwarf2_fetch_die_loc_sect_off): Add and handle resolve_abstract_p
        parameter.
        * dwarf2read.h (struct die_info): Forward-declare.
        (die_info_ptr): New typedef.
        (struct dwarf2_per_objfile): Add abstract_to_concrete field.

2018-09-05  Joel Brobecker  <brobecker@adacore.com>

        GDB 8.2 released.

2018-09-04  Sergio Durigan Junior  <sergiodj@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gnulib/Makefile.in (aclocal_m4_deps): Move to
        "aclocal-m4-deps.mk".  Include file here.
        $(srcdir)/aclocal.m4: Add "configure.ac".
        * gnulib/aclocal-m4-deps.mk: New file.
        * gnulib/update-gnulib.sh: Automatically update
        "aclocal-m4-deps.mk".

2018-09-04  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * configure.ac: Remove multi-ice code.

2018-09-04  Tom Tromey  <tom@tromey.com>

        * Makefile.in (GDB_WARN_CFLAGS_NO_DEFS): Remove.
        (ada-exp.o): Update.

2018-09-04  Tom Tromey  <tom@tromey.com>

        * Makefile.in (printcmd.o, target-float.o): Remove.
        (GDB_WARN_CFLAGS_NO_FORMAT): Remove.

2018-09-04  Tom Tromey  <tom@tromey.com>

        * gnulib/Makefile.in: Remove obsolete comment.
        * Makefile.in: Remove obsolete comment.

2018-09-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_frame_cache): Fix ARI warning, don't end a
        line with '+'.

2018-09-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c: Add 'prologue-value.h' include.
        (struct riscv_unwind_cache): New struct.
        (riscv_debug_unwinder): New global.
        (riscv_scan_prologue): Update arguments, capture register details
        from prologue scan.
        (riscv_skip_prologue): Reformat arguments line, move end of
        prologue calculation into riscv_scan_prologue.
        (riscv_frame_cache): Update return type, create
        riscv_unwind_cache, scan the prologue, and fill in remaining cache
        details.
        (riscv_frame_this_id): Use frame id computed in riscv_frame_cache.
        (riscv_frame_prev_register): Use the trad_frame within the
        riscv_unwind_cache.
        (_initialize_riscv_tdep): Add 'set/show debug riscv unwinder'
        flag.

2018-09-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * trad-frame.h (trad_frame_set_realreg): Declare.
        (trad_frame_set_addr): Declare.
        * trad-frame.c (trad_frame_set_realreg): Define new function.
        (trad_frame_set_addr): Define new function.
        (trad_frame_set_reg_realreg): Use new function.
        (trad_frame_set_reg_addr): Use new function.

2018-09-01  Keith Seitz  <keiths@redhat.com>

        * compile/compile-cplus-types.c (compile_cplus_debug_output_1): Use
        pulongest instead of "%lld".
        * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol): Remove
        ATTRIBUTE_UNUSED.

2018-08-31  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (dwarf2_add_field): Set the TYPE_LENGTH of the
        variant part type.

2018-08-31  Pedro Alves  <palves@redhat.com>

        * gdbarch.h: Regenerate.

2018-08-31  Pedro Alves  <palves@redhat.com>

        * gdbarch.sh (have_nonsteppable_watchpoint): Add comment.
        * target.h (Hardware watchpoint interfaces): Describe
        continuable/steppable/non-steppable watchpoints.
        * gdbarch.h, gdbarch.c: Regenerate.

2018-08-31  Pedro Alves  <palves@redhat.com>

        * nto-procfs.c (nto_procfs_target::have_continuable_watchpoint):
        Delete.
        * s390-linux-nat.c
        (s390_linux_nat_target::have_continuable_watchpoint): Delete.
        * target.h (target_ops::have_continuable_watchpoint): Delete.
        (target_have_continuable_watchpoint): Delete.
        * x86-nat.h (x86_nat_target::have_continuable_watchpoint): Delete.
        * target-delegates.c: Regenerate.

2018-08-31  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gnulib/Makefile.in (aclocal_m4_deps): Update according to
        the files present in "gnulib/import/m4/".

2018-08-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_insn::decode): Decode c.addi4spn, c.sd,
        c.sw, c.swsp, and c.sdsp.

2018-08-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (struct riscv_inferior_data): Delete.
        (riscv_read_misa_reg): Don't cache value read into inferior data.
        (riscv_new_inferior_data): Delete.
        (riscv_inferior_data_cleanup): Delete.
        (riscv_inferior_data): Delete.
        (riscv_invalidate_inferior_data): Delete.
        (_initialize_riscv_tdep): Remove initialisation of inferior data.

2018-08-30  Simon Marchi  <simon.marchi@ericsson.com>

        * compile/compile-cplus-types.c
        (compile_cplus_instance::leave_scope): Take the address of scope
        object.
        (compile_cplus_instance::convert_qualified_base): Compare quals
        to 0.

2018-08-30  Keith Seitz  <keiths@redhat.com>

        * compile/compile-cplus-types.c (compile_cplus_instance::enter_scope):
        Use "%s" and host_address_to_string instead of "%p" in printf.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * Makefile.in (SUBDIR_GCC_COMPILE_SRCS): Add compile-cplus-symbols.c
        and compile-cplus-types.c.
        (HFILES_NO_SRCDIR): Add gcc-cp-plugin.h.
        * c-lang.c (cplus_language_defn): Set C++ compile functions.
        * c-lang.h (cplus_get_compile_context, cplus_compute_program):
        Declare.
        * compile/compile-c-support.c: Include compile-cplus.h.
        (load_libcompile): Templatize.
        (get_compile_context): "New" function.
        (c_get_compile_context): Use get_compile_context.
        (cplus_get_compile_context): New function.
        (cplus_push_user_expression, cplus_pop_user_expression)
        (cplus_add_code_header, cplus_add_input, cplus_compile_program)
        (cplus_compute_program): Define new structs/functions.
        * compile/compile-cplus-symmbols.c: New file.
        * compile/compile-cplus-types.c: New file.
        * compile/compile-cplus.h: New file.
        * compile/compile-internal.h (debug_compile_oracle, GCC_TYPE_NONE):
        Declare.
        * compile/compile-object-load.c (get_out_value_type): Use
        strncmp_iw when comparing symbol names.
        (compile_object_load): Add mst_bss and mst_data.
        * compile/compile.c (_initialize_compile): Remove
        -Wno-implicit-function-declaration from `compile_args'.
        * compile/gcc-cp-plugin.h: New file.
        * NEWS: Mention C++ compile support and new debug options.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (collect_info::add_symbol): Make virtual.
        (struct symbol_searcher_collect_info): New struct.
        (symbol_searcher::find_all_symbols): New method.
        * symtab.h (class symbol_searcher): New class.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (struct linespec) <function_symbols, label_symbols>:
        Change to vector of block_symbol.  Update all users.
        (struct collect_info) <symbols>: Likewise.
        (collect_info::add_symbol): Take block_symbol as argument.
        Update all callers.
        (decode_compound_collector) <m_symbols>: Change type to vector
        of block_symbol.  Update all users.
        (decode_compound_collector::operator ()): Change parameter type
        to block_symbol.
        (find_method, find_function_symbols, find_linespec_symbols)
        (find_label_symbols_in_block, find_label_symbols): Change symbol
        vectors to block_symbol vectors.
        * symtab.h (symbol_found_callback_ftype): Change parameter type to
        block_symbol.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (symbolp): Remove typedef and VEC definitions.
        (bound_minimal_symbol_d): Likewise.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (decode_compound_collector::decode_compound_collector):
        Remove initialization for `m_symtabs'.
        (decode_compound_collector::release_symbols): Change return type
        to std::vector.  Update all callers.
        (class decode_compound_collector) <m_symbols>: Change type to
        std::vector.
        (lookup_prefix_sym): Change return type to std::vector.  Update all
        callers.
        (compare_symbols): Remove.
        (std_compare_symbols): Rename to `compare_symbols'.
        (find_method): Change `sym_classes' parameter to std::vector.
        Update all callers.  Use std::sort to sort sym_classes.
        (find_linespec_symbols): Remove cleanup.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (struct linespec) <minimal_symbols>: Change type to
        std::vector.  Update all users.
        (convert_linespec_to_sals): Use std::sort to sort minimal symbols.
        (struct collect_info) <minimal_symbols>: Likewise.
        (compare_msymbols): Return bool.  Change parameters to const
        bound_minimal_symbol references.
        (find_method, find_function_symbols, find_linespec_symbols): Change
        `minsyms' parameter to std::vector.  Update all callers.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (struct linespec) <label_symbols>: Change type to
        std::vector.  Update all users.
        (find_label_symbols_in_block): Change `result' parameter to
        std::vector.  Update all callers.
        (find_label_symbols): Return std::vector.  Update all callers.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (struct linespec) <function_symbols>: Change type to
        std::vector.  Update all users.
        (struct collect_info) <function_symbols>: Likewise.
        (convert_linespec_to_sals): Use std::sort to sort function_symbols.
        (std_compare_symbols): New function.
        (find_method, find_function_symbols, find_linespec_symbols)
        (find_label_symbols_in_block): Change `symbols' parameter to
        std::vector.  Update all callers.
        (find_label_symbols): Likewise for `function_symbols' and
        `label_funcs_ret'.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * linespec.c (symtab_vector_up): Define.
        (struct linespec) <file_symtabs>: Change type to std::vector *.
        Update all uses.
        (struct collect_info) <file_symtabs>: Likewise.
        (collect_symtabs_from_filename): Return symtab_vector_up.
        Update all callers.
        (decode_objc): Remove cleanup.
        (symtab_collector::symtab_collector): Initialize `m_symtabs'.
        (symtab_collector::release_symtabs): Return symtab_vector_up.
        Update all callers.
        (class symtab_collector) <m_symtabs>: Change type to symtab_vector_up.
        Update all users.
        (collect_symtabs_from_filename, symtabs_from_filename): Return
        symtab_vector_up.  Update all callers.

2018-08-29  Tom Tromey  <tom@tromey.com>

        * csky-tdep.c (csky_analyze_prologue): Use
        core_addr_to_string_nz.

2018-08-29  Tom Tromey  <tom@tromey.com>

        * windows-nat.c (struct xlate_exception) <them>: Change type to
        DWORD.
        (xlate): Fix formatting.  Remove last entry.
        (struct xlate_exception, xlate): Comment out.
        (windows_nat_target::resume): Use ranged for.

2018-08-29  Jim Wilson  <jimw@sifive.com>

        * riscv-linux-nat.c: Include elf/common.h instead of elf.h.
        (riscv_linux_nat_target::fetch_registers): Use NT_FPREGSET instead
        of NT_PRFPREG.
        (riscv_linux_nat_target::store_registers): Likewise.

2018-08-29  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/23555
        PR gdb/23558
        * gnulib/aclocal.m4: Regenerate.
        * gnulib/config.in: Regenerate.
        * gnulib/configure: Regenerate.
        * gnulib/import/Makefile.am: Update.
        * gnulib/import/Makefile.in: Update.
        * gnulib/import/extra/snippet/_Noreturn.h: Rename to...
        * gnulib/import/_Noreturn.h: ... this.
        * gnulib/import/alloca.in.h: Update.
        * gnulib/import/extra/snippet/arg-nonnull.h: Rename to...
        * gnulib/import/arg-nonnull.h: ... this.
        * gnulib/import/assure.h: Update.
        * gnulib/import/at-func.c: Update.
        * gnulib/import/basename-lgpl.c: Update.
        * gnulib/import/extra/snippet/c++defs.h: Rename to...
        * gnulib/import/c++defs.h: ... this.
        * gnulib/import/canonicalize-lgpl.c: Update.
        * gnulib/import/cdefs.h: Update.
        * gnulib/import/chdir-long.c: Update.
        * gnulib/import/chdir-long.h: Update.
        * gnulib/import/cloexec.c: Update.
        * gnulib/import/cloexec.h: Update.
        * gnulib/import/close.c: Update.
        * gnulib/import/closedir.c: Update.
        * gnulib/import/config.charset: Update.
        * gnulib/import/dirent-private.h: Update.
        * gnulib/import/dirent.in.h: Update.
        * gnulib/import/dirfd.c: Update.
        * gnulib/import/dirname-lgpl.c: Update.
        * gnulib/import/dirname.h: Update.
        * gnulib/import/dosname.h: Update.
        * gnulib/import/dup-safer-flag.c: Update.
        * gnulib/import/dup-safer.c: Update.
        * gnulib/import/dup.c: Update.
        * gnulib/import/dup2.c: Update.
        * gnulib/import/errno.in.h: Update.
        * gnulib/import/error.c: Update.
        * gnulib/import/error.h: Update.
        * gnulib/import/exitfail.c: Update.
        * gnulib/import/exitfail.h: Update.
        * gnulib/import/extra/update-copyright: Update.
        * gnulib/import/fchdir.c: Update.
        * gnulib/import/fcntl.c: Update.
        * gnulib/import/fcntl.in.h: Update.
        * gnulib/import/fd-hook.c: Update.
        * gnulib/import/fd-hook.h: Update.
        * gnulib/import/fd-safer-flag.c: Update.
        * gnulib/import/fd-safer.c: Update.
        * gnulib/import/fdopendir.c: Update.
        * gnulib/import/filename.h: Update.
        * gnulib/import/filenamecat-lgpl.c: Update.
        * gnulib/import/filenamecat.h: Update.
        * gnulib/import/flexmember.h: Update.
        * gnulib/import/float+.h: Update.
        * gnulib/import/float.c: Update.
        * gnulib/import/float.in.h: Update.
        * gnulib/import/fnmatch.c: Update.
        * gnulib/import/fnmatch.in.h: Update.
        * gnulib/import/fnmatch_loop.c: Update.
        * gnulib/import/fpucw.h: Update.
        * gnulib/import/frexp.c: Update.
        * gnulib/import/frexpl.c: Update.
        * gnulib/import/fstat.c: Update.
        * gnulib/import/fstatat.c: Update.
        * gnulib/import/getcwd-lgpl.c: Update.
        * gnulib/import/getcwd.c: Update.
        * gnulib/import/getdtablesize.c: Update.
        * gnulib/import/getlogin_r.c: Update.
        * gnulib/import/getprogname.c: Update.
        * gnulib/import/getprogname.h: Update.
        * gnulib/import/gettext.h: Update.
        * gnulib/import/gettimeofday.c: Update.
        * gnulib/import/glob-libc.h: Update.
        * gnulib/import/glob.c: Update.
        * gnulib/import/glob.in.h: Update.
        * gnulib/import/glob_internal.h: Update.
        * gnulib/import/glob_pattern_p.c: Update.
        * gnulib/import/globfree.c: Update.
        * gnulib/import/hard-locale.c: Update.
        * gnulib/import/hard-locale.h: Update.
        * gnulib/import/intprops.h: Update.
        * gnulib/import/inttypes.in.h: Update.
        * gnulib/import/isnan.c: Update.
        * gnulib/import/isnand-nolibm.h: Update.
        * gnulib/import/isnand.c: Update.
        * gnulib/import/isnanl-nolibm.h: Update.
        * gnulib/import/isnanl.c: Update.
        * gnulib/import/itold.c: Update.
        * gnulib/import/libc-config.h: Update.
        * gnulib/import/limits.in.h: Update.
        * gnulib/import/localcharset.c: Update.
        * gnulib/import/localcharset.h: Update.
        * gnulib/import/localtime-buffer.c: Update.
        * gnulib/import/localtime-buffer.h: Update.
        * gnulib/import/lstat.c: Update.
        * gnulib/import/m4/00gnulib.m4: Update.
        * gnulib/import/m4/__inline.m4: Update.
        * gnulib/import/m4/absolute-header.m4: Update.
        * gnulib/import/m4/alloca.m4: Update.
        * gnulib/import/m4/builtin-expect.m4: Update.
        * gnulib/import/m4/canonicalize.m4: Update.
        * gnulib/import/m4/chdir-long.m4: Update.
        * gnulib/import/m4/close.m4: Update.
        * gnulib/import/m4/closedir.m4: Update.
        * gnulib/import/m4/configmake.m4: Update.
        * gnulib/import/m4/d-ino.m4: Update.
        * gnulib/import/m4/d-type.m4: Update.
        * gnulib/import/m4/dirent_h.m4: Update.
        * gnulib/import/m4/dirfd.m4: Update.
        * gnulib/import/m4/dirname.m4: Update.
        * gnulib/import/m4/double-slash-root.m4: Update.
        * gnulib/import/m4/dup.m4: Update.
        * gnulib/import/m4/dup2.m4: Update.
        * gnulib/import/m4/eealloc.m4: Update.
        * gnulib/import/m4/environ.m4: Update.
        * gnulib/import/m4/errno_h.m4: Update.
        * gnulib/import/m4/error.m4: Update.
        * gnulib/import/m4/exponentd.m4: Update.
        * gnulib/import/m4/exponentl.m4: Update.
        * gnulib/import/m4/extensions.m4: Update.
        * gnulib/import/m4/extern-inline.m4: Update.
        * gnulib/import/m4/fchdir.m4: Update.
        * gnulib/import/m4/fcntl-o.m4: Update.
        * gnulib/import/m4/fcntl.m4: Update.
        * gnulib/import/m4/fcntl_h.m4: Update.
        * gnulib/import/m4/fdopendir.m4: Update.
        * gnulib/import/m4/filenamecat.m4: Update.
        * gnulib/import/m4/flexmember.m4: Update.
        * gnulib/import/m4/float_h.m4: Update.
        * gnulib/import/m4/fnmatch.m4: Update.
        * gnulib/import/m4/fnmatch_h.m4: Update.
        * gnulib/import/m4/fpieee.m4: Update.
        * gnulib/import/m4/frexp.m4: Update.
        * gnulib/import/m4/frexpl.m4: Update.
        * gnulib/import/m4/fstat.m4: Update.
        * gnulib/import/m4/fstatat.m4: Update.
        * gnulib/import/m4/getcwd-abort-bug.m4: Update.
        * gnulib/import/m4/getcwd-path-max.m4: Update.
        * gnulib/import/m4/getcwd.m4: Update.
        * gnulib/import/m4/getdtablesize.m4: Update.
        * gnulib/import/m4/getlogin.m4: Update.
        * gnulib/import/m4/getlogin_r.m4: Update.
        * gnulib/import/m4/getpagesize.m4: Update.
        * gnulib/import/m4/getprogname.m4: Update.
        * gnulib/import/m4/gettimeofday.m4: Update.
        * gnulib/import/m4/glibc21.m4: Update.
        * gnulib/import/m4/glob.m4: Update.
        * gnulib/import/m4/glob_h.m4: Update.
        * gnulib/import/m4/gnulib-cache.m4: Update.
        * gnulib/import/m4/gnulib-common.m4: Update.
        * gnulib/import/m4/gnulib-comp.m4: Update.
        * gnulib/import/m4/gnulib-tool.m4: Update.
        * gnulib/import/m4/hard-locale.m4: Update.
        * gnulib/import/m4/include_next.m4: Update.
        * gnulib/import/m4/inttypes-pri.m4: Update.
        * gnulib/import/m4/inttypes.m4: Update.
        * gnulib/import/m4/isnand.m4: Update.
        * gnulib/import/m4/isnanl.m4: Update.
        * gnulib/import/m4/largefile.m4: Update.
        * gnulib/import/m4/limits-h.m4: Update.
        * gnulib/import/m4/localcharset.m4: Update.
        * gnulib/import/m4/locale-fr.m4: Update.
        * gnulib/import/m4/locale-ja.m4: Update.
        * gnulib/import/m4/locale-zh.m4: Update.
        * gnulib/import/m4/localtime-buffer.m4: Update.
        * gnulib/import/m4/longlong.m4: Update.
        * gnulib/import/m4/lstat.m4: Update.
        * gnulib/import/m4/malloc.m4: Update.
        * gnulib/import/m4/malloca.m4: Update.
        * gnulib/import/m4/math_h.m4: Update.
        * gnulib/import/m4/mbrtowc.m4: Update.
        * gnulib/import/m4/mbsinit.m4: Update.
        * gnulib/import/m4/mbsrtowcs.m4: Update.
        * gnulib/import/m4/mbstate_t.m4: Update.
        * gnulib/import/m4/memchr.m4: Update.
        * gnulib/import/m4/memmem.m4: Update.
        * gnulib/import/m4/mempcpy.m4: Update.
        * gnulib/import/m4/memrchr.m4: Update.
        * gnulib/import/m4/mkdir.m4: Update.
        * gnulib/import/m4/mkstemp.m4: Update.
        * gnulib/import/m4/mmap-anon.m4: Update.
        * gnulib/import/m4/mode_t.m4: Update.
        * gnulib/import/m4/msvc-inval.m4: Update.
        * gnulib/import/m4/msvc-nothrow.m4: Update.
        * gnulib/import/m4/multiarch.m4: Update.
        * gnulib/import/m4/nocrash.m4: Update.
        * gnulib/import/m4/off_t.m4: Update.
        * gnulib/import/m4/onceonly.m4: Update.
        * gnulib/import/m4/open-cloexec.m4: Update.
        * gnulib/import/m4/open.m4: Update.
        * gnulib/import/m4/openat.m4: Update.
        * gnulib/import/m4/opendir.m4: Update.
        * gnulib/import/m4/pathmax.m4: Update.
        * gnulib/import/m4/rawmemchr.m4: Update.
        * gnulib/import/m4/readdir.m4: Update.
        * gnulib/import/m4/readlink.m4: Update.
        * gnulib/import/m4/realloc.m4: Update.
        * gnulib/import/m4/rename.m4: Update.
        * gnulib/import/m4/rewinddir.m4: Update.
        * gnulib/import/m4/rmdir.m4: Update.
        * gnulib/import/m4/save-cwd.m4: Update.
        * gnulib/import/m4/secure_getenv.m4: Update.
        * gnulib/import/m4/setenv.m4: Update.
        * gnulib/import/m4/signal_h.m4: Update.
        * gnulib/import/m4/ssize_t.m4: Update.
        * gnulib/import/m4/stat-time.m4: Update.
        * gnulib/import/m4/stat.m4: Update.
        * gnulib/import/m4/std-gnu11.m4: Update.
        * gnulib/import/m4/stdbool.m4: Update.
        * gnulib/import/m4/stddef_h.m4: Update.
        * gnulib/import/m4/stdint.m4: Update.
        * gnulib/import/m4/stdio_h.m4: Update.
        * gnulib/import/m4/stdlib_h.m4: Update.
        * gnulib/import/m4/strchrnul.m4: Update.
        * gnulib/import/m4/strdup.m4: Update.
        * gnulib/import/m4/strerror.m4: Update.
        * gnulib/import/m4/string_h.m4: Update.
        * gnulib/import/m4/strstr.m4: Update.
        * gnulib/import/m4/strtok_r.m4: Update.
        * gnulib/import/m4/sys_socket_h.m4: Update.
        * gnulib/import/m4/sys_stat_h.m4: Update.
        * gnulib/import/m4/sys_time_h.m4: Update.
        * gnulib/import/m4/sys_types_h.m4: Update.
        * gnulib/import/m4/tempname.m4: Update.
        * gnulib/import/m4/time_h.m4: Update.
        * gnulib/import/m4/unistd-safer.m4: Update.
        * gnulib/import/m4/unistd_h.m4: Update.
        * gnulib/import/m4/warn-on-use.m4: Update.
        * gnulib/import/m4/wchar_h.m4: Update.
        * gnulib/import/m4/wchar_t.m4: Update.
        * gnulib/import/m4/wctype_h.m4: Update.
        * gnulib/import/m4/wint_t.m4: Update.
        * gnulib/import/malloc.c: Update.
        * gnulib/import/malloc/scratch_buffer.h: Update.
        * gnulib/import/malloc/scratch_buffer_grow.c: Update.
        * gnulib/import/malloc/scratch_buffer_grow_preserve.c: Update.
        * gnulib/import/malloc/scratch_buffer_set_array_size.c: Update.
        * gnulib/import/malloca.c: Update.
        * gnulib/import/malloca.h: Update.
        * gnulib/import/malloca.valgrind: Update.
        * gnulib/import/math.in.h: Update.
        * gnulib/import/mbrtowc.c: Update.
        * gnulib/import/mbsinit.c: Update.
        * gnulib/import/mbsrtowcs-impl.h: Update.
        * gnulib/import/mbsrtowcs-state.c: Update.
        * gnulib/import/mbsrtowcs.c: Update.
        * gnulib/import/memchr.c: Update.
        * gnulib/import/memmem.c: Update.
        * gnulib/import/mempcpy.c: Update.
        * gnulib/import/memrchr.c: Update.
        * gnulib/import/mkdir.c: Update.
        * gnulib/import/mkstemp.c: Update.
        * gnulib/import/msvc-inval.c: Update.
        * gnulib/import/msvc-inval.h: Update.
        * gnulib/import/msvc-nothrow.c: Update.
        * gnulib/import/msvc-nothrow.h: Update.
        * gnulib/import/open.c: Update.
        * gnulib/import/openat-die.c: Update.
        * gnulib/import/openat-priv.h: Update.
        * gnulib/import/openat-proc.c: Update.
        * gnulib/import/openat.c: Update.
        * gnulib/import/openat.h: Update.
        * gnulib/import/opendir.c: Update.
        * gnulib/import/pathmax.h: Update.
        * gnulib/import/pipe-safer.c: Update.
        * gnulib/import/rawmemchr.c: Update.
        * gnulib/import/readdir.c: Update.
        * gnulib/import/readlink.c: Update.
        * gnulib/import/realloc.c: Update.
        * gnulib/import/ref-add.sin: Update.
        * gnulib/import/ref-del.sin: Update.
        * gnulib/import/rename.c: Update.
        * gnulib/import/rewinddir.c: Update.
        * gnulib/import/rmdir.c: Update.
        * gnulib/import/same-inode.h: Update.
        * gnulib/import/save-cwd.c: Update.
        * gnulib/import/save-cwd.h: Update.
        * gnulib/import/scratch_buffer.h: Update.
        * gnulib/import/secure_getenv.c: Update.
        * gnulib/import/setenv.c: Update.
        * gnulib/import/signal.in.h: Update.
        * gnulib/import/stat-time.c: Update.
        * gnulib/import/stat-time.h: Update.
        * gnulib/import/stat-w32.c: Update.
        * gnulib/import/stat-w32.h: Update.
        * gnulib/import/stat.c: Update.
        * gnulib/import/stdbool.in.h: Update.
        * gnulib/import/stddef.in.h: Update.
        * gnulib/import/stdint.in.h: Update.
        * gnulib/import/stdio.in.h: Update.
        * gnulib/import/stdlib.in.h: Update.
        * gnulib/import/str-two-way.h: Update.
        * gnulib/import/strchrnul.c: Update.
        * gnulib/import/strdup.c: Update.
        * gnulib/import/streq.h: Update.
        * gnulib/import/strerror-override.c: Update.
        * gnulib/import/strerror-override.h: Update.
        * gnulib/import/strerror.c: Update.
        * gnulib/import/string.in.h: Update.
        * gnulib/import/stripslash.c: Update.
        * gnulib/import/strnlen1.c: Update.
        * gnulib/import/strnlen1.h: Update.
        * gnulib/import/strstr.c: Update.
        * gnulib/import/strtok_r.c: Update.
        * gnulib/import/sys_stat.in.h: Update.
        * gnulib/import/sys_time.in.h: Update.
        * gnulib/import/sys_types.in.h: Update.
        * gnulib/import/tempname.c: Update.
        * gnulib/import/tempname.h: Update.
        * gnulib/import/time.in.h: Update.
        * gnulib/import/unistd--.h: Update.
        * gnulib/import/unistd-safer.h: Update.
        * gnulib/import/unistd.in.h: Update.
        * gnulib/import/unsetenv.c: Update.
        * gnulib/import/verify.h: Update.
        * gnulib/import/extra/snippet/warn-on-use.h: Update.
        * gnulib/import/wchar.in.h: Update.
        * gnulib/import/wctype.in.h: Update.
        * gnulib/import/xalloc-oversized.h: Update.
        * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
        "53e2c179f26a890fa6685af4b6c1397ee370433b".

2018-08-16  Gary Benson <gbenson@redhat.com>

        PR gdb/13000:
        * gdb/main.c (captured_main_1): Exit with nonzero status
        in batch mode if the last command to be executed failed.
        * NEWS: Mention the above.

2018-08-29  Simon Marchi  <simon.marchi@ericsson.com>

        * csky-tdep.c (csky_memory_insert_breakpoint): Remove newline at
        end of warning message.

2018-08-29  Alan Hayward  <alan.hayward@arm.com>

        PR gdb/22943:
        * aarch64-tdep.c (is_hfa_or_hva): Remove function.
        (aarch64_extract_return_value): Use
        aapcs_is_vfp_call_or_return_candidate.
        (aarch64_return_in_memory): Likewise.
        (aarch64_store_return_value): Likewise.

2018-08-29  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c
        (aapcs_is_vfp_call_or_return_candidate): Make static
        (pass_in_v_or_stack): Remove function.
        (pass_in_v_vfp_candidate): New function.
        (aarch64_push_dummy_call): Check for float register candidates.

2018-08-29  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (HA_MAX_NUM_FLDS): New macro.
        (aapcs_is_vfp_call_or_return_candidate_1): New function.
        (aapcs_is_vfp_call_or_return_candidate): Likewise.

2018-08-28  Simon Marchi  <simon.marchi@polymtl.ca>

        PR build/23399
        * common/agent.c (IPA_SYM_STRUCT_NAME): Define.
        (struct ipa_sym_addresses): Rename to...
        (struct ipa_sym_addresses_common): ... this.
        * common/agent.h (IPA_SYM): Use IPA_SYM_STRUCT_NAME.

2018-08-28  Tom Tromey  <tom@tromey.com>

        * c-exp.y (struct token_and_value): Remove typedef and DEF_VEC.
        (token_fifo): Now a std::vector.
        (yylex, c_parse): Update.
        * d-exp.y (struct token_and_value): Remove typedef and DEF_VEC.
        (token_fifo): Now a std::vector.
        (yylex, d_parse): Update.
        * go-exp.y (struct token_and_value): Remove typedef and DEF_VEC.
        (token_fifo): Now a std::vector.
        (yylex, go_parse): Update.

2018-08-28  Simon Marchi  <simon.marchi@ericsson.com>

        * parser-defs.h (struct type_stack) <elements>: Change type to
        std::vector<union type_stack_elt>.
        <depth, size>: Remove.
        * parse.c (parse_exp_in_context_1): Adjust.
        (type_stack_reserve): Remove.
        (check_type_stack_depth): Remove.
        (insert_into_type_stack): Adjust to std::vector.
        (insert_type): Likewise.
        (push_type): Likewise.
        (push_type_int): Likewise.
        (insert_type_address_space): Likewise.
        (pop_type): Likewise.
        (pop_type_int): Likewise.
        (pop_typelist): Likewise.
        (pop_type_stack): Likewise.
        (append_type_stack): Likewise.
        (push_type_stack): Likewise.
        (get_type_stack): Likewise.
        (type_stack_cleanup): Likewise.
        (push_typelist): Likewise.
        (follow_types): Likewise.
        (_initialize_parse): Likewise.

2018-08-28  Hafiz Abid Qadeer  <abidh@codesourcery.com>

        * NEWS: Mention csky target.

2018-08-28  Jiangshuai Li  <jiangshuai_li@c-sky.com>
            Hafiz Abid Qadeer  <abidh@codesourcery.com>
            Don Breazeal  <donb@codesourcery.com>

        * csky-linux-tdep.c: New file.
        * csky-tdep.c: Likewise.
        * csky-tdep.h: Likewise.
        * Makefile.in (ALL_TARGET_OBS): Add csky-linux-tdep.o and
        csky-tdep.o.
        (HFILES_NO_SRCDIR): Add csky-tdep.h.
        (ALLDEPFILES): Add csky-linux-tdep.c and csky-tdep.c
        * configure.tgt: Add csky support.

2018-08-27  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * python/py-framefilter.c (py_print_frame): Print frame architecture
        when printing on an MI output.

2018-08-27  Tom Tromey  <tom@tromey.com>

        PR build/23087:
        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS): Remove -Wno-narrowing.

2018-08-27  Tom Tromey  <tom@tromey.com>

        * aarch64-linux-tdep.c
        (aarch64_linux_iterate_over_regset_sections) <sve_regmap>: Add
        casts to int.

2018-08-27  Tom Tromey  <tom@tromey.com>

        * ppc64-tdep.c (insn_d, insn_ds, insn_xfx): Add casts to
        unsigned.
        (ppc64_standard_linkage1, ppc64_standard_linkage2)
        (ppc64_standard_linkage3, ppc64_standard_linkage4)
        (ppc64_standard_linkage5, ppc64_standard_linkage6)
        (ppc64_standard_linkage7, ppc64_standard_linkage8): Add casts to
        unsigned.

2018-08-27  Tom Tromey  <tom@tromey.com>

        * xtensa-tdep.h (XTREG_END): Add cast to unsigned.
        (XTENSA_GDBARCH_TDEP_INSTANTIATE): Likewise.

2018-08-27  Tom Tromey  <tom@tromey.com>

        * tramp-frame.h (TRAMP_SENTINEL_INSN): Redefine.
        * tilegx-linux-tdep.c (tilegx_linux_rt_sigframe): Use
        ULONGEST_MAX.
        * tic6x-linux-tdep.c (tic6x_linux_rt_sigreturn_tramp_frame): Use
        ULONGEST_MAX.
        * sparc64-linux-tdep.c (sparc64_linux_rt_sigframe): Use
        ULONGEST_MAX.
        * sparc-linux-tdep.c (sparc32_linux_sigframe)
        (sparc32_linux_rt_sigframe): Use ULONGEST_MAX.
        * ppc-nbsd-tdep.c (ppcnbsd_sigtramp, ppcnbsd2_sigtramp): Use
        ULONGEST_MAX.
        * ppc-linux-tdep.c (ppc32_linux_sigaction_tramp_frame)
        (ppc64_linux_sigaction_tramp_frame)
        (ppc32_linux_sighandler_tramp_frame)
        (ppc64_linux_sighandler_tramp_frame): Use ULONGEST_MAX.
        * nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame)
        (nios2_r2_linux_rt_sigreturn_tramp_frame): Use ULONGEST_MAX.
        * mn10300-linux-tdep.c (am33_linux_sigframe)
        (am33_linux_rt_sigframe): Use ULONGEST_MAX.
        * mips64-obsd-tdep.c (mips64obsd_sigframe): Use ULONGEST_MAX.
        * mips-linux-tdep.c (mips_linux_o32_sigframe)
        (mips_linux_o32_rt_sigframe, mips_linux_n32_rt_sigframe)
        (mips_linux_n64_rt_sigframe, micromips_linux_o32_sigframe)
        (micromips_linux_o32_rt_sigframe, micromips_linux_n32_rt_sigframe)
        (micromips_linux_n64_rt_sigframe): Use ULONGEST_MAX.
        * mips-fbsd-tdep.c (mips_fbsd_sigframe, mipsn32_fbsd_sigframe)
        (mips64_fbsd_sigframe): Use ULONGEST_MAX.
        * microblaze-linux-tdep.c
        (microblaze_linux_sighandler_tramp_frame): Use ULONGEST_MAX.
        * i386-nbsd-tdep.c (i386nbsd_sigtramp_sc16, i386nbsd_sigtramp_sc2)
        (i386nbsd_sigtramp_si2, i386nbsd_sigtramp_si31)
        (i386nbsd_sigtramp_si4): Use ULONGEST_MAX.
        * hppa-nbsd-tdep.c (hppanbsd_sigtramp_si4): Use ULONGEST_MAX.
        * common/common-types.h (ULONGEST_MAX): New define.
        (CORE_ADDR_MAX): Fix formatting.
        * bfin-linux-tdep.c (bfin_linux_sigframe): Use ULONGEST_MAX.
        * arm-obsd-tdep.c (armobsd_sigframe): Use ULONGEST_MAX.
        * arm-linux-tdep.c (arm_linux_sigreturn_tramp_frame)
        (arm_linux_rt_sigreturn_tramp_frame)
        (arm_eabi_linux_sigreturn_tramp_frame)
        (arm_eabi_linux_rt_sigreturn_tramp_frame)
        (thumb2_eabi_linux_sigreturn_tramp_frame)
        (thumb2_eabi_linux_rt_sigreturn_tramp_frame)
        (arm_linux_restart_syscall_tramp_frame)
        (arm_kernel_linux_restart_syscall_tramp_frame): Use ULONGEST_MAX.
        * arm-fbsd-tdep.c (arm_fbsd_sigframe): Use ULONGEST_MAX.
        * aarch64-linux-tdep.c (aarch64_linux_rt_sigframe): Use
        ULONGEST_MAX.
        * aarch64-fbsd-tdep.c (aarch64_fbsd_sigframe): Use ULONGEST_MAX.

2018-08-27  Tom Tromey  <tom@tromey.com>

        * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Use
        CORE_ADDR_MAX.
        * mips-tdep.c (mips_deal_with_atomic_sequence)
        (micromips_deal_with_atomic_sequence): Use CORE_ADDR_MAX.
        * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw)
        (arm_deal_with_atomic_sequence_raw): Use CORE_ADDR_MAX.
        * alpha-tdep.c (alpha_deal_with_atomic_sequence): Use
        CORE_ADDR_MAX.
        * aarch64-tdep.c (aarch64_software_single_step): Use
        CORE_ADDR_MAX.

2018-08-27  Tom Tromey  <tom@tromey.com>

        * linespec.c (complete_linespec_component): Add cast to "char".
        * completer.c (completion_tracker::build_completion_result): Add
        cast to "char".

2018-08-26  Simon Marchi  <simon.marchi@polymtl.ca>

        * solist.h (struct solist, struct target_so_ops): Fix
        indentation.

2018-08-26  Simon Marchi  <simon.marchi@polymtl.ca>

        * ada-tasks.c (ada_task_info_s): Remove typedef.
        (DEF_VEC_O(ada_task_info_s)): Remove.
        (struct ada_tasks_inferior_data): Initialize fields.
        <task_list>: Make an std::vector.
        (get_ada_tasks_inferior_data): Allocate with new.
        (ada_get_task_number): Adjust.
        (get_task_number_from_id): Likewise.
        (valid_task_id): Likewise.
        (ada_get_task_info_from_ptid): Likewise.
        (iterate_over_live_ada_tasks): Likewise.
        (add_ada_task): Likewise.
        (read_known_tasks): Likewise.
        (ada_build_task_list): Likewise.
        (print_ada_task_info): Likewise.
        (info_task): Likewise.
        (task_command_1): Likewise.

2018-08-26  Simon Marchi  <simon.marchi@polymtl.ca>

        * ada-lang.c (add_angle_brackets): Return std::string.

2018-08-25  Simon Marchi  <simon.marchi@polymtl.ca>

        * python/py-threadevent.c (py_get_event_thread): Initialize
        pythread.

2018-08-24  Pedro Alves  <palves@redhat.com>

        * python/py-bpevent.c (create_breakpoint_event_object): Use
        copy-initialization.
        * python/py-continueevent.c (emit_continue_event): Use
        copy-initialization.
        * python/py-exitedevent.c (create_exited_event_object): Return a
        gdbpy_ref<>.
        (emit_exited_event): Use copy-initialization.
        * python/py-inferior.c (python_new_inferior)
        (python_inferior_deleted, add_thread_object): Use
        copy-initialization.
        * python/py-infevents.c (create_inferior_call_event_object)
        (create_register_changed_event_object)
        (create_memory_changed_event_object): Return a gdbpy_ref<>.
        (emit_inferior_call_event, emit_memory_changed_event)
        (emit_register_changed_event): Use copy-initialization.
        * python/py-newobjfileevent.c (create_new_objfile_event_object):
        Return a gdbpy_ref<>.
        (emit_new_objfile_event): Use copy-initialization.
        (create_clear_objfiles_event_object): Return a gdbpy_ref<>.
        (emit_clear_objfiles_event): Use copy-initialization.
        * python/py-signalevent.c (create_signal_event_object): Use
        copy-initialization.
        * python/py-threadevent.c (create_thread_event_object): Use
        copy-initialization.

2018-08-24  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/23379
        * python/py-continueevent.c: Include "gdbthread.h".
        (create_continue_event_object): Add intro comment.  Add 'ptid'
        parameter.  Use it to find thread to pass to
        create_thread_event_object.
        (emit_continue_event): Pass PTID down to
        create_continue_event_object.
        * python/py-event.h (py_get_event_thread): Declare.
        (create_thread_event_object): Remove default from 'thread'
        parameter.
        * python/py-stopevent.c (create_stop_event_object): Use
        py_get_event_thread.
        * python/py-threadevent.c (get_event_thread): Rename to ...
        (py_get_event_thread): ... this, make extern, add 'ptid' parameter
        and use it to find the thread.
        (create_thread_event_object): Assert that THREAD isn't null.
        Don't find the event thread here.

2018-08-23  Kevin Buettner  <kevinb@redhat.com>

        * block.h (blockrange, blockranges): New struct declarations.
        (struct block): Add new field named `ranges'.
        (BLOCK_RANGES, BLOCK_NRANGES, BLOCK_RANGE, BLOCK_CONTIGUOUS_P)
        (BLOCK_RANGE_START, BLOCK_RANGE_END, BLOCK_ENTRY_PC): New
        macros for accessing ranges in struct block.
        (make_blockranges): New declaration.
        block.c (make_blockranges): New function.
        * dwarf2read.c (dwarf2_record_block_ranges): Fill in BLOCK_RANGES
        for block.
        * symtab.h (find_pc_partial_function): Add new parameter `block'.
        * blockframe.c (cache_pc_function_block): New static global.
        (clear_pc_function_cache): Clear cache_pc_function_block.
        (find_pc_partial_function): Move comment to symtab.h.  Add
        support for non-contiguous blocks.
        * cli/cli-cmds.c (block.h): Include.
        (print_disassembly): Handle printing of non-contiguous blocks.
        (disassemble_current_function): Likewise.
        (disassemble_command): Likewise.

        * ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of
        BLOCK_START.
        * blockframe.c (get_pc_function_start): Likewise.
        * compile/compile-c-symbols.c (convert_one_symbol): Likewise.
        (gcc_symbol_address): Likewise.
        * compile/compile-object-run.c (compile_object_run): Likewise.
        * compile/compile.c (get_expr_block_and_pc): Likewise.
        * dwarf2loc.c (dwarf2_find_location_expression): Likewise.
        (func_addr_to_tail_call_list): Likewise.
        * findvar.c (default_read_var_value): Likewise.
        * inline-frame.c (inline_frame_this_id): Likewise.
        (skip-inline_frames): Likewise.
        * infcmd.c (until_next_command): Likewise.
        * linespec.c (convert_linespec_to_sals): Likewise.
        * parse.c (parse_exp_in_context_1): Likewise.
        * printcmd.c (build_address_symbolic): likewise.
        (info_address_command): Likewise.
        symtab.c (find_function_start_sal): Likewise.
        (skip_prologue_sal): Likewise.
        (find_function_alias_target): Likewise.
        (find_gnu_ifunc): Likewise.
        * stack.c (find_frame_funname): Likewise.
        * symtab.c (fixup_symbol_section): Likewise.
        (find_function_start_sal): Likewise.
        (skip_prologue_sal): Likewsie.
        (find_function_alias_target): Likewise.
        (find_gnu_ifunc): Likewise.
        * tracepoint.c (info_scope_command): Likewise.
        * value.c (value_fn_field): Likewise.

        * infrun.c (fill_in_stop_func): Use find_function_entry_range_from_pc
        in place of find_pc_partial_function.
        * blockframe.c (find_function_entry_range_from_pc): New function.
        * symtab.h (find_function_entry_range_from_pc): Declare and document.
        * objfiles.c (objfile_relocate1): Relocate start and end addresses
        for each range in a block.


2018-08-23  Xavier Roirand  <roirand@adacore.com>

        * machoread.c (macho_symfile_read_all_oso): Remove uneeded
        incrementation.

2018-08-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * solib-svr4.c (read_program_headers_from_bfd): Return
        gdb::optional<gdb::byte_vector>.
        (svr4_exec_displacement): Adjust.

2018-08-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * solib-svr4.c (read_program_header): Return
        gdb::optional<gdb::byte_vector>, remove p_sect_size param.
        (find_program_interpreter): Return
        gdb::optional<gdb::byte_vector>.
        (scan_dyntag_auxv): Adjust.
        (enable_break): Adjust.
        (svr4_exec_displacement): Adjust.

2018-08-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * inf-child.h (inf_child_target) <terminal_save_inferior>: New.
        * inf-child.c (inf_child_target::terminal_save_inferior): New.

2018-08-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * guile/scm-string.c (gdbscm_scm_from_printf): Use
        string_vprintf.
        * guile/scm-utils.c (gdbscm_printf): Likewise.
        * serial.c (serial_printf): Likewise.
        * xml-support.c (gdb_xml_parser::vdebug): Likewise.

2018-08-22  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * stack.c (print_frame): Print frame architecture when printing on
        an MI output.
        * NEWS: Mention new "arch" attribute in frame output.

2018-08-21  Alan Hayward  <alan.hayward@arm.com>

        * arch/aarch64.h (aarch64_regnum): Update comment.

2018-08-21  Alan Hayward  <alan.hayward@arm.com>

        * NEWS: Add SVE to 8.2 section.

2018-08-21  Pedro Alves  <palves@redhat.com>

        * guile/scm-utils.c (gdbscm_parse_function_args_1): New, factored
        out from gdbscm_parse_function_args.
        (gdbscm_parse_function_args): Rework to use gdbscm_wrap and
        gdbscm_parse_function_args_1.

2018-08-21  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/17816
        * m32c-tdep.c (m32c_decode_srcdest4): Remove unnecessary ternary
        operator.

2018-08-19  Simon Marchi  <simon.marchi@polymtl.ca>

        * solib-svr4.c (svr4_exec_displacement): Fix formatting.

2018-08-19  Michael Spang  <spang@google.com>

        PR gdb/11786
        * solib-svr4.c (svr4_exec_displacement): Ignore memsz fields
        for PT_TLS segments.

2018-08-18  Kevin Buettner  <kevinb@redhat.com>

        * dwarf2expr.h (struct dwarf_expr_context): Add virtual method
        dwarf_variable_value.
        * dwarf2-frame.c (class dwarf_expr_executor):
        Add override for dwarf_variable_value.
        * dwarf2loc.c (class dwarf_evaluate_loc_desc): Likewise.
        (class symbol_needs_eval_context): Likewise.
        (indirect_synthetic_pointer): Add forward declaration.
        (sect_variable_value): New function.
        (dwarf2_compile_expr_to_ax): Add case for DW_OP_GNU_variable_value.
        * dwarf2expr.c (dwarf_expr_context::execute_stack_op): Add case
        for DW_OP_GNU_variable_value.

2018-08-16  Tom Tromey  <tom@tromey.com>

        * top.c (read_command_file): Update.
        (command_line_input): Remove "repeat" argument.
        * ada-lang.c (get_selections): Update.
        * linespec.c (decode_line_2): Update.
        * defs.h (command_line_input): Remove argument.
        * cli/cli-script.c (read_next_line): Update.
        * python/py-gdb-readline.c: Update.

2018-08-17  Tom Tromey  <tom@tromey.com>

        * cli/cli-script.c (read_next_line): Pass 0 as repeat argument to
        command_line_input.

2018-08-15  Tom Tromey  <tom@tromey.com>

        * aarch64-linux-tdep.c (aarch64_linux_core_read_vq): Use pulongest.

2018-08-14  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Add -a option.
        If used, use find_pc_partial_function to find address range
        to disassemble.
        * mi/mi-main.c (mi_cmd_list_features): Report
        "data-disassemble-a-option" feature.
        * NEWS: Mention new -data-disassemble option -a.

2018-08-13  Tom Tromey  <tom@tromey.com>

        * common/common-defs.h (_FORTIFY_SOURCE): Define.

2018-08-13  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-tdep.c (aarch64_linux_supply_sve_regset): New function.
        (aarch64_linux_collect_sve_regset): Likewise.
        (aarch64_linux_iterate_over_regset_sections): Check for SVE.
        * regcache.h (regcache_map_entry_size): New function.

2018-08-13  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-tdep.c (SVE_HEADER_SIZE_LENGTH): Add define.
        (SVE_HEADER_MAX_SIZE_LENGTH): Likewise.
        (SVE_HEADER_VL_LENGTH): Likewise.
        (SVE_HEADER_MAX_VL_LENGTH): Likewise.
        (SVE_HEADER_FLAGS_LENGTH): Likewise.
        (SVE_HEADER_RESERVED_LENGTH): Likewise.
        (SVE_HEADER_SIZE_OFFSET): Likewise.
        (SVE_HEADER_MAX_SIZE_OFFSET): Likewise.
        (SVE_HEADER_VL_OFFSET): Likewise.
        (SVE_HEADER_MAX_VL_OFFSET): Likewise.
        (SVE_HEADER_FLAGS_OFFSET): Likewise.
        (SVE_HEADER_RESERVED_OFFSET): Likewise.
        (SVE_HEADER_SIZE): Likewise.
        (aarch64_linux_core_read_vq): Add function.
        (aarch64_linux_core_read_description): Check for SVE section.

2018-08-13  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-fbsd-tdep.c
        (aarch64_fbsd_iterate_over_regset_sections): Add supply_size and
        collect_size.
        * aarch64-linux-tdep.c
        (aarch64_linux_iterate_over_regset_sections): Likewise.
        * alpha-linux-tdep.c
        (alpha_linux_iterate_over_regset_sections):
        * alpha-nbsd-tdep.c
        (alphanbsd_iterate_over_regset_sections): Likewise.
        * amd64-fbsd-tdep.c
        (amd64fbsd_iterate_over_regset_sections): Likewise.
        * amd64-linux-tdep.c
        (amd64_linux_iterate_over_regset_sections): Likewise.
        * arm-bsd-tdep.c
        (armbsd_iterate_over_regset_sections): Likewise.
        * arm-fbsd-tdep.c
        (arm_fbsd_iterate_over_regset_sections): Likewise.
        * arm-linux-tdep.c
        (arm_linux_iterate_over_regset_sections): Likewise.
        * corelow.c (get_core_registers_cb): Likewise.
        (core_target::fetch_registers): Likewise.
        * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
        * frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise.
        * gdbarch.h (void): Regenerate.
        * gdbarch.sh: Add supply_size and collect_size.
        * hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise.
        * hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise.
        * hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise.
        * i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise.
        * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise.
        * i386-tdep.c (i386_iterate_over_regset_sections): Likewise.
        * ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise.
        * linux-tdep.c (linux_collect_regset_section_cb): Likewise.
        * m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise.
        * m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise.
        * m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise.
        * mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise.
        * mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise.
        * mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise.
        * mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections):
        Likewise.
        * mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise.
        * nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise.
        * ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise.
        * ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise.
        * ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise.
        * ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise.
        * riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections):
        Likewise.
        * rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise.
        * s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise.
        * score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise.
        * sh-tdep.c (sh_iterate_over_regset_sections): Likewise.
        * sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise.
        * tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise.
        * vax-tdep.c (vax_iterate_over_regset_sections): Likewise.
        * xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.

2018-08-10  Simon Marchi  <simon.marchi@ericsson.com>

        * nat/linux-osdata.c (commandline_from_pid): Replace xstrprintf
        with string_printf.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * compile/compile-c-support.c (add_code_header, add_code_footer):
        Move into policy class.
        (c_push_user_expression, pop_user_expression_nop)
        (c_add_code_header, c_add_code_footer, c_add_input): New policy class.
        (compile_program): New host class.
        (c_compile_program): New typedef.
        (c_compute_porgram): Use c_compile_program.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * compile/compile-internal.h (compile_instance::~compile_instance):
        Remove calls to htab_delete.
        <m_type_map, m_symbol_err_map>: Switch type to htab_up.
        * compile.c (compile_instance::compile_instance): Initialize
        htab unique pointers.
        (compile_instance::get_cached_type, compile_instance::insert_type)
        (compile_instance::error_symbol_once): Update for unique_ptr.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * compile/compile-c-symbols.c (struct symbol_error)
        (hash_symbol_error, eq_symbol_error, del_symbol_error)
        (compile_instance::insert_symbol_error)
        (compile_instance::error_symbol_once): Move to ...
        * compile/compile.c: ... here.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * compile/compile-c-support.c (c_get_compile_context): Use `new'
        instead of `new_compile_instance'.
        * compile/compile-c-symbols.c (compile_instance::insert_symbol_error):
        Update description.
        If the symbol error map is not initialized, create it.
        (generate_c_for_for_one_symbol): Do not check/initialize
        the symbol error map.
        * compile/compile-c-types.c (compile_c_instance): Make a class.
        Update all callers.
        (compile_instance::compile_instance): Initialize the type cache.
        (get_cached_type): New function.
        (insert_type): Update description.
        (compile_c_instance::m_default_cflags): Define.
        (convert_type): Update description.  Use get_cached_type.
        (delete_instance): Moved to destructor.
        (new_compile_instance): Moved to constructor.
        * compile/compile-c.h (compile_c_instance): Make class inheriting
        from compile_instance.
        <base>: Remove field.
        <type_map, symbol_err_map>: Move to base class.
        <c_plugin>: Rename to `m_plugin' and remove pointer type.
        * compile/compile-internal.h (compile_instance): Make class.
        <type_map_t, symbol_err_map_t>: Define.
        <fe>: Rename to `m_gcc_fe'.
        <scope, block, gcc_target_options>: Add `m_' prefix.
        <m_type_map, m_symbol_err_map>: New fields, moved from
        compile_c_instance.
        <destroy>: Remove.
        (convert_type, new_compile_instance): Remove.
        * compile/compile.c (cleanup_compile_instance): Remove.
        (compile_to_object): Use unique_ptr to eliminate cleanups.
        (compile_instance::set_print_callback, compile_instance::version)
        (compile_instance::set_verbose)
        (compile_instance::set_driver_filename)
        (compile_instance::set_triplet_regexp)
        (compile_instance::set_arguments)
        (compile_instance::set_source_file)
        (compile_instance::compile): Define.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * Makefile.in (HFILES_NO_SRCDIR): Add compile/gcc-c-plugin.h.
        * compile/compile-c-types.c: Define GCC_METHODN macros and include
        gcc-c-fe.def to define C plugin.
        (delete_instance): Delete `c_plugin'.
        (new_compile_instance): Initialize `c_plugin'.
        * compile/compile-c.h: Include gcc_c_plugin.h.
        (struct compile_c_instance) <c_plugin>: New member.
        * gcc-c-plugin.h: New file.
        Update all callers with API change.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * Makefile.in (SUBDIR_GCC_COMPILE_SRCS): Move header files ...
        (HFILES_NO_SRCDIR): ... to here.
        Add compile-internal.h and compile-c.h.
        * compile/compile-c-support.c: Include compile-c.h.
        * compile/compile-c-symbols.c: Include compile-c.h.
        (generate_c_for_variable_locations): Update comment.
        * compile/compile-c-types.c: Include compile-c.h.
        * compile/compile-c.h: New file -- moved C language declarations
        from other files here.
        * compile/compile-internal.h: Do not include hashtab.h or
        common/enum-flags.h.
        (gcc_qualifiers_flags, struct compile_c_instance, C_CTX)
        (gcc_convert_symbol, gcc_symbol_address)
        (generate_c_for_variable_locations, c_get_mode_for_size)
        (c_get_range_decl_name): Definitions moved to compile-c.h.
        * compile/compile-loc2c.c: Include compile-c.h.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * compile/compile-c-symbols.c (symbol_substitution_name): Rename to ...
        (c_symbol_substitution_name): ... this.
        Update all callers.

2018-08-10  Keith Seitz  <keiths@redhat.com>

        * compile/compile-c-support.c (c_compute_program): Use
        unique_xmalloc_ptr to eliminate cleanup.
        * compile/compile-c-symbols.c (generate_c_for_variable_locations):
        Return a unique_xmalloc_ptr and eliminate cleanup.
        * compile/compile-internal.h (generate_c_for_variable_locations):
        Return unique_xmalloc_ptr and update description.

2018-08-10  Alan Hayward  <alan.hayward@arm.com>

        * corelow.c (core_target::get_core_register_section): Rename
        min_size to section_min_size.

2018-08-09  Jim Wilson  <jimw@sifive.com>

        * Makefile.in (ALL_TARGET_OBS): Add riscv-linux-tdep.c.
        (ALLDEPFILES): Add riscv-linux-nat.c, and riscv-linux-tdep.c.
        * NEWS: Mention new GNU/Linux RISC-V target.
        * configure.host: Add riscv*-*-linux*.
        * configure.nat: Add riscv*.
        * configure.tgt: Add riscv*-*-linux*.
        * riscv-linux-nat.c: New file.
        * riscv-linux-tdep.c: New file.

2018-08-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * infrun.c (resume): Make static, add forward declaration.
        (proceed): Update header comment.
        * infrun.h (resume): Delete declaration.

2018-08-09  Tom Tromey  <tom@tromey.com>

        * riscv-tdep.h: Minor formatting fixes.

2018-08-09  Simon Marchi  <simon.marchi@ericsson.com>

        * common/scoped_mmap.c (mmap_file): Silence ARI warning.
        * dwarf-index-cache.c (create_dir_and_check): Likewise.
        (test_mkdir_recursive): Likewise.
        * dwarf-index-write.c (write_psymtabs_to_index): Likewise.

2018-08-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * valarith.c (value_subscripted_rvalue): If an array is not in
        memory, and we don't know the upper bound, then we can't know that
        the requested element exists or not.

2018-08-08  Simon Marchi  <simon.marchi@ericsson.com>

        * target.c (str_comma_list_concat_elem): Fix typo in comment.
        (target_options_to_string): Add comment.

2018-08-08  Tom Tromey  <tom@tromey.com>

        * unittests/scoped_mmap-selftests.c: Check result of "write".

2018-08-08  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (enum opcode): Add jump, branch, lr, and sc opcodes.
        (decode_register_index_short): New.
        (decode_j_type_insn, decode_cj_type_insn): New.
        (decode_b_type_insn, decode_cb_type_insn): New.
        (riscv_insn::decode): Add support for jumps, branches, lr, and sc.  New
        local xlen.  Check xlen when decoding ambiguous compressed insns.  In
        compressed decode, use is_c_lui_insn instead of is_lui_insn, and
        is_c_sw_insn instead of is_sw_insn.
        (riscv_next_pc, riscv_next_pc_atomic_sequence): New.
        (riscv_software_single_step): New.
        * riscv-tdep.h (riscv_software_single_step): Declare.

        * riscv-tdep.c (riscv_isa_xlen): Drop static.
        * riscv-tdep.h (riscv_isa_xlen): Add extern declaration.

2018-08-08  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/18050:
        * target.c (dispose_inferior): Don't dispose of inferiors that are
        already killed.

2018-08-08  Szabolcs Nagy  <szabolcs.nagy@arm.com>

        * remote.c (remote_target::download_tracepoint): Change char* to
        const char*.

2018-08-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * target.h (target_options_to_string): Return an std::string.
        * target.c (str_comma_list_concat_elem): Return void, use
        std::string.
        (do_option): Likewise.
        (target_options_to_string): Return an std::string.
        * linux-nat.c (linux_nat_target::wait): Adjust.
        * target-debug.h (target_debug_print_options): Adjust.

2018-08-07  Tom Tromey  <tom@tromey.com>

        * Makefile.in (CPPFLAGS): New variable.
        (INTERNAL_CPPFLAGS): Use it.

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * NEWS: Mention the index cache.

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * common/pathstuff.h (get_standard_cache_dir): New.
        * common/pathstuff.c (get_standard_cache_dir): New.
        * build-id.h (build_id_to_string): New.
        * dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX,
        DEBUG_STR_SUFFIX): Move to here.
        * dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX,
        DEBUG_STR_SUFFIX): Move from there.
        (write_psymtabs_to_index): Make non-static, add basename
        parameter.  Write to temporary files, rename when done.
        (save_gdb_index_command): Adjust call to
        write_psymtabs_to_index.
        * dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New
        field.
        * dwarf2read.c (dwz_file) <index_cache_res>: New field.
        (get_gdb_index_contents_from_cache): New.
        (get_gdb_index_contents_from_cache_dwz): New.
        (dwarf2_initialize_objfile): Read index from cache.
        (dwarf2_build_psymtabs): Save to index.
        * dwarf-index-cache.h: New file.
        * dwarf-index-cache.c: New file.
        * dwarf-index-write.h: New file.

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * gnulib/aclocal.m4: Re-generate.
        * gnulib/config.in: Re-generate.
        * gnulib/configure: Re-generate.
        * gnulib/import/Makefile.am: Re-generate.
        * gnulib/import/Makefile.in: Re-generate.
        * gnulib/import/m4/gnulib-cache.m4: Re-generate.
        * gnulib/import/m4/gnulib-comp.m4: Re-generate.
        * gnulib/import/m4/mkdir.m4: New file.
        * gnulib/import/mkdir.c: New file.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add mkdir
        module.

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (COMMON_SFILES): Add common/scoped_mmap.c.
        * common/scoped_mmap.c: New file.
        * common/scoped_mmap.h (destroy): New method.
        (~scoped_mmap, reset): Use destroy.
        (scoped_mmap): New move constructor.
        (mmap_file): New declaration.
        * unittests/scoped_mmap-selftests.c (test_normal,
        test_invalid_filename, run_tests): New functions.
        (_initialize_scoped_mmap_selftests): Register selftest.

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (read_gdb_index_from_section): Rename to...
        (read_gdb_index_from_buffer): ... this.  Remove section
        parameter, add buffer parameter.
        (get_gdb_index_contents_ftype,
        get_gdb_index_contents_dwz_ftype): New typedefs.
        (dwarf2_read_gdb_index): Add callback parameters to get the
        index contents.
        (get_gdb_index_contents_from_section): New.
        (dwarf2_initialize_objfile): Update call to
        dwarf2_read_gdb_index.

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * common/filestuff.h (gdb_fopen_cloexec): New overload.
        (gdb_open_cloexec): Likewise.
        * nat/linux-osdata.c (command_from_pid): Use string_printf.
        (commandline_from_pid): Likewise.
        (linux_xfer_osdata_threads): Likewise.
        (linux_xfer_osdata_fds): Likewise.
        * ada-lang.c (is_package_name): Likewise.
        * auxv.c (procfs_xfer_auxv): Likewise.
        * breakpoint.c (print_one_breakpoint_location): Use
        uiout::field_fmt.
        (print_one_catch_solib): Use string_printf.
        * coff-pe-read.c (add_pe_exported_sym): Likewise.
        (add_pe_forwarded_sym): Likewise.
        * dwarf2read.c (create_type_unit_group): Likewise.
        (build_error_marker_type): Likewise.
        * infcall.c (get_function_name): Likewise.
        * valprint.c (print_converted_chars_to_obstack): Likewise.
        * xtensa-tdep.c (xtensa_register_type): Likewise.

2018-08-06  Simon Marchi  <simon.marchi@ericsson.com>

        * remote.c (remote_target::download_tracepoint): Fix format
        string errors.

2018-08-06  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * tracefile.c: Include common/byte-vector.h.
        (trace_save): Change type of buf to gdb::byte_vector.  Initialize
        with trace_regblock_size if needed.  Update uses of buf.

2018-08-06  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * tracepoint.h (collection_list) <m_regs_mask>: Change type to
        std::vector<unsigned char>.
        * tracepoint.c (collection_list::collection_list): Remove
        m_regs_mask initializer from initializer list.  Resize
        m_regs_mask using the largest remote register number.
        (collection_list::add_remote_register): Remove size check on
        m_regs_mask.  Use at to access element.
        (collection_list::stringify): Change type of temp_buf to
        gdb::char_vector.  Update uses of temp_buf.  Resize if needed to
        stringify the register mask.  Use pack_hex_byte for the register
        mask.

2018-08-06  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * tracepoint.h (class collection_list) <add_register>: Remove.
        <add_remote_register, add_ax_registers, add_local_register>:
        Declare.
        <add_memrange>: Add scope parameter.
        * tracepoint.c (encode_actions_1): Likewise.
        (collection_list::add_register): Rename to ...
        (collection_list::add_remote_register): ... this.  Update
        comment.
        (collection_list::add_ax_registers, add_local_register): New
        methods.
        (collection_list::add_memrange): Add scope parameter.  Call
        add_local_register instead of add_register.
        (finalize_tracepoint_aexpr): New function.
        (collection_list::collect_symbol): Update calls to add_memrange.
        Call add_local_register instead of add_register.  Call
        add_ax_registers.  Call finalize_tracepoint_aexpr.
        (encode_actions_1): Get remote regnos for $reg action.  Call
        add_remote_register, add_ax_registers, and add_local_register.
        Update call to add_memrange.  Call finalize_tracepoint_aexpr.
        (validate_actionline): Call finalize_tracepoint_aexpr.

2018-08-06  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * remote.c (remote_target::download_tracepoint): Remove BUF_SIZE.
        Replace array buf with gdb::char_vector buf, of size
        get_remote_packet_size ().  Replace references to buf and
        BUF_SIZE to buf.data () and buf.size ().  Replace strcpy, strcat
        and xsnprintf with snprintf.  Raise errors if the buffer is too
        small.

2018-08-06  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * remote.c (remote_target::download_tracepoint): Fix the has_more
        predicate in the QTDP action list iteration.

2018-08-06  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * remote.c (remote_target::download_tracepoint): Fix indentation
        in for block.

2018-08-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * proc-api.c (_initialize_proc_api): Remove c, unused.
        * procfs.c (procfs_init_inferior): Remove signals, unused.
        (procfs_target::make_corefile_notes): Remove old_chain, fpregs,
        unused.

2018-08-06  Sergey Korolev  <s.korolev@ndmsystems.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * linux-nat.c (linux_nat_target::follow_fork): Avoid using
        'W_STOPCODE (0)' as this could be ambiguous.

2018-08-03  Sergio Durigan Junior  <sergiodj@redhat.com>

        * ser-tcp.c (net_open): Fix thinko when deciding whether to
        disable TCP's Nagle algorithm (use "ai_protocol" instead of
        "ai_socktype").

2018-08-02  Tom Tromey  <tom@tromey.com>

        PR symtab/16842.
        * dwarf2read.c (read_func_scope): Set symtab on template parameter
        symbols.
        (process_structure_scope): Likewise.

2018-08-02  Xavier Roirand  <roirand@adacore.com>

        PR gdb/22629:
        * darwin-nat.c (darwin_kill_inferior): Fix handling of
        kill inferior.

2018-08-02  Tom Tromey  <tom@tromey.com>

        * darwin-nat.c (find_inferior_task_it, darwin_find_thread)
        (darwin_suspend_inferior, darwin_resume_inferior)
        (darwin_decode_notify_message, darwin_resume_inferior_threads)
        (darwin_check_new_threads): Check result of get_darwin_inferior.

2018-07-31  Joel Brobecker  <brobecker@adacore.com>

        GDB 8.1.1 released.

2018-07-31  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * varobj.c (varobj_get_path_expr_parent): Report an error if
        parent is a dynamic varobj.

2018-07-31  Simon Marchi  <simon.marchi@ericsson.com>

        * gnulib/aclocal.m4: Re-generate.
        * gnulib/config.in: Re-generate.
        * gnulib/configure: Re-generate.
        * gnulib/import/Makefile.in: Re-generate.
        * gnulib/import/m4/gnulib-comp.m4: Re-generate.
        * gnulib/import/m4/onceonly.m4: Re-generate.

2018-07-31  Simon Marchi  <simon.marchi@ericsson.com>

        * target-descriptions.c (struct xml_test_tdesc): New.
        (xml_tdesc): Change type to std::vector<xml_test_tdesc>.
        (record_xml_tdesc): Update.
        (maintenance_check_xml_descriptions): Update.
        * target-descriptions.h (record_xml_tdesc): Update comment.

2018-07-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * eval.c (evaluate_subexp_for_sizeof): Check for array type before
        checking array bounds are defined.

2018-07-30  Tom Tromey  <tom@tromey.com>

        * nat/linux-osdata.c (pid_pgid_entry::operator<): Fix
        irreflexivity violation.

2018-07-30  Tom Tromey  <tom@tromey.com>

        * cli/cli-decode.c (lookup_cmd): Remove lint code.
        * value.c (unpack_long): Remove lint code.
        * valops.c (value_ind): Remove lint code.
        * valarith.c (value_x_binop, value_x_unop, value_equal)
        (value_pos): Remove lint code.

2018-07-28  Tom de Vries  <tdevries@suse.de>

        * eval.c (evaluate_subexp_for_sizeof): Interpret size of dynamic type
        with undefined upper bound as <optimized out>.

2018-07-27  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gcore.in: Rename variable "name" to "prefix".  Expand
        "usage" text.

2018-07-14  Jon Turney  <jon.turney@dronecode.org.uk>

        * windows-nat.c (windows_nat_target::create_inferior): Update to
        call close() in global namespace.

2018-07-26  Tom Tromey  <tom@tromey.com>

        * dwarf-index-write.c (add_address_entry): Don't add objfile
        offsets.
        * dbxread.c (find_stab_function): Rename from
        find_stab_function_addr.  Return a bound_minimal_symbol.
        (read_dbx_symtab): Use raw_text_low, raw_text_high.
        Don't add objfile offsets.
        (end_psymtab): Use raw_text_low, raw_text_high,
        MSYMBOL_VALUE_RAW_ADDRESS.
        (read_ofile_symtab): Update.
        (process_one_symbol): Update.
        * dwarf2read.c (create_addrmap_from_index): Don't add objfile
        offsets.
        (dw2_relocate): Remove.
        (dw2_find_pc_sect_symtab): Bias PC by the text offset before
        searching addrmap.
        (dwarf2_gdb_index_functions, dwarf2_debug_names_functions):
        Update.
        (process_psymtab_comp_unit_reader, add_partial_symbol)
        (add_partial_subprogram, dwarf2_ranges_read): Update.
        (load_partial_dies): Update.
        (add_address_entry): Don't add objfile offsets.
        (dwarf2_build_include_psymtabs): Update.
        (create_addrmap_from_aranges): Don't add objfile offsets.
        (dw2_find_pc_sect_compunit_symtab): Update.
        * mdebugread.c (parse_symbol): Don't add objfile offsets.
        (parse_lines): Remove 'pst' parameter, replace with 'textlow'.
        Update.
        (parse_partial_symbols): Don't add objfile offsets.  Use
        raw_text_low, raw_text_high.  Update.
        (handle_psymbol_enumerators, psymtab_to_symtab_1): Update.
        * objfiles.c (objfile_relocate1): Don't relocate psymtabs_addrmap
        or call 'relocate' quick function.  Clear psymbol_map.
        * psympriv.h (struct partial_symbol) <address>: Add section
        offset.
        <set_unrelocated_address>: Rename from set_address.
        <raw_text_low, raw_text_high>: New methods.
        <text_low, text_high>: Add objfile parameter.
        (add_psymbol_to_bcache): Add 'section' parameter.  Call
        set_unrelocated_address.
        * psymtab.c (find_pc_sect_psymtab_closer, find_pc_sect_psymtab)
        (find_pc_psymbol): Update.
        (fixup_psymbol_section, relocate_psymtabs): Remove.
        (dump_psymtab, psym_functions): Update.
        (add_psymbol_to_bcache, add_psymbol_to_list): Add 'section'
        parameter.
        (maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
        (start_psymtab_common): Update.
        * symfile-debug.c (debug_qf_relocate): Remove.
        (debug_sym_quick_functions): Update.
        * symfile.h (struct quick_symbol_functions) <relocate>: Remove.
        * xcoffread.c (scan_xcoff_symtab): Don't add objfile offsets.
        Update.

2018-07-26  Tom Tromey  <tromey@redhat.com>

        * dbxread.c (end_psymtab): Use text_high_valid and
        text_low_valid.
        * mdebugread.c (parse_partial_symbols): Use text_low_valid.
        (psymtab_to_symtab_1): Use text_high_valid and text_low_valid.
        * psympriv.h (struct partial_symtab) <m_text_low, m_text_high>:
        Update comment.
        <text_low_valid, text_high_valid>: New fields.
        <set_text_low, set_text_high>: Update.
        * xcoffread.c (scan_xcoff_symtab): Use text_low_valid.

2018-07-26  Tom Tromey  <tom@tromey.com>

        * dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab):
        Update.
        * dwarf2read.c (dwarf2_create_include_psymtab): Don't initialize
        textlow and texthigh fields.
        (process_psymtab_comp_unit_reader, dwarf2_build_include_psymtabs):
        Update.
        * mdebugread.c (parse_lines, parse_partial_symbols)
        (psymtab_to_symtab_1): Update.
        * psympriv.h (struct partial_symtab) <m_text_low, m_text_high>:
        Rename fields.  Update comment.  Now private.
        <text_low, text_high, set_text_low, set_text_high>: New methods.
        * psymtab.c (find_pc_sect_psymtab_closer, find_pc_sect_psymtab)
        (find_pc_sect_psymbol, relocate_psymtabs, dump_psymtab)
        (start_psymtab_common, maintenance_info_psymtabs)
        (maintenance_check_psymtabs): Update.
        * xcoffread.c (xcoff_end_psymtab): Don't initialize textlow and
        texthigh fields.
        (scan_xcoff_symtab): Update.

2018-07-26  Tom Tromey  <tromey@redhat.com>

        * psympriv.h (struct partial_symbol) <unrelocated_address,
        address, set_address>: New methods.
        * psymtab.c (find_pc_sect_psymtab_closer, find_pc_sect_psymbol)
        (fixup_psymbol_section, relocate_psymtabs): Update.
        (print_partial_symbols): Add 'objfile' parameter.  Update.
        (dump_psymtab, add_psymbol_to_bcache, psym_fill_psymbol_map):
        Update.

2018-07-26  Tom Tromey  <tom@tromey.com>

        * dwarf-index-write.c (write_psymbols, debug_names::insert)
        (debug_names::write_psymbols): Update.
        * psympriv.h (struct partial_symbol): Derive from
        general_symbol_info.
        <obj_section>: New method.
        (PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.n
        * psymtab.c (find_pc_sect_psymtab_closer, find_pc_sect_psymtab)
        (find_pc_sect_psymbol, fixup_psymbol_section)
        (match_partial_symbol, lookup_partial_symbol, relocate_psymtabs)
        (print_partial_symbols, recursively_search_psymtabs)
        (compare_psymbols, psymbol_hash, psymbol_compare)
        (add_psymbol_to_bcache, maintenance_check_psymtabs)
        (psymbol_name_matches, psym_fill_psymbol_map): Update.

2018-07-26  Tom Tromey  <tromey@redhat.com>

        * dbxread.c (end_psymtab): Remove dead code.

2018-07-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * dwarf2-frame-tailcall.c (tailcall_frame_sniffer): Exit early if
        DWARF unwinders are disabled.
        * dwarf2-frame.c: Add dwarf2read.h include.
        (dwarf2_frame_sniffer): Exit early if DWARF unwinders are
        disabled.
        (dwarf2_frame_unwinders_enabled_p): Define.
        (show_dwarf_unwinders_enabled_p): New function.
        (_initialize_dwarf2_frame): Register switch to control DWARF
        unwinder use.
        * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Declare.
        * dwarf2read.c (set_dwarf_cmdlist): Remove static keyword.
        (show_dwarf_cmdlist): Remove static keyword.
        * dwarf2read.h (set_dwarf_cmdlist): Declare.
        (show_dwarf_cmdlist): Declare.
        * NEWS: Document new feature.

2018-07-26  Tom de Vries  <tdevries@suse.de>

        PR breakpoints/23366
        * infcmd.c (info_program_command): Handle ptid == minus_one_ptid.

2018-07-26  Tom de Vries  <tdevries@suse.de>

        * dwarf2read.c (read_subrange_type): Warn if DW_AT_upper_bound or
        DW_AT_count can't be translated to a dynamic prop.

2018-07-25  Tom de Vries  <tdevries@suse.de>

        * dwarf2loc.c (dwarf2_locexpr_baton_eval): Wrap ctx.eval call in
        try/catch.

2018-07-25  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * breakpoint.c (enable_disable_bp_num_loc): Notify observers.

2018-07-25  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS (Global Maintainers): Add Tom Tromey.

2018-07-24  Keith Seitz  <keiths@redhat.comt

        PR symtab/23010
        * dwarf2read.c (dw2_add_symbol_to_list): New function.
        (fixup_go_packaging, new_symbol): Use dw2_add_symbol_to_list
        instead of add_symbol_to_list.
        (read_file_scope): Call prepare_one_comp_unit before reading
        any other DIEs.

2018-07-24  Simon Marchi  <simon.marchi@ericsson.com>

        * common/scoped_mmap.h (class scoped_mmap): Fix indentation.

2018-07-24  Tom Tromey  <tom@tromey.com>

        * utils.c (malloc, realloc, free): Don't declare.
        * configure, config.in: Rebuild.
        * configure.ac: Don't check for declarations of free, malloc, or
        realloc.

2018-07-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * aarch64-linux-nat.c
        (aarch64_linux_nat_target::stopped_data_address): Remove unused
        variable.
        * arm-linux-nat.c (fetch_regs): Likewise.
        (store_regs): Likewise.
        (fetch_vfp_regs): Likewise.
        (store_vfp_regs): Likewise.
        (arm_linux_nat_target::insert_hw_breakpoint): Likewise.
        (arm_linux_nat_target::remove_hw_breakpoint): Likewise.
        (arm_linux_nat_target::insert_watchpoint): Likewise.
        (arm_linux_nat_target::remove_watchpoint): Likewise.
        * mips-linux-nat.c (mips_linux_nat_target::insert_watchpoint):
        Likewise.
        * nat/aarch64-sve-linux-ptrace.c (aarch64_sve_get_sveregs):
        Likewise.
        * ppc-linux-nat.c (fetch_register): Likewise.
        (fetch_all_gp_regs): Likewise.
        (fetch_ppc_registers): Likewise.
        (store_all_gp_regs): Likewise.
        (store_ppc_registers): Likewise.
        (hwdebug_insert_point): Likewise.
        (can_use_watchpoint_cond_accel): Likewise.
        * remote-sim.c (gdb_os_write_stdout): Likewise.

2018-07-22  Simon Marchi  <simon.marchi@polymtl.ca>
            Tom Tromey  <tom@tromey.com>

        * warning.m4 (AM_GDB_WARNINGS): Add -Wunused-variable and special
        test for it.
        * configure: Rebuild.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * regformats/regdat.sh: Define xmltarget_${name} inside
        #ifndef IN_PROCESS_AGENT.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * value.c (value_fetch_lazy_bitfield): Remove unused variable.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * symfile.c (reread_symbols): Notify iter, not objfile.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * ravenscar-thread.c (ravenscar_thread_target::store_registers):
        Use arch_ops.
        (ravenscar_thread_target::prepare_to_store): Likewise.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Remove
        unused variable.  Call value_fetch_lazy when needed.
        * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
        Remove unused variable.  Call value_fetch_lazy when needed.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * m32c-tdep.c (mark_dma): Return void.
        (make_regs): Remove unused declarations.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * guile/scm-cmd.c (gdbscm_dont_repeat): Call
        cmdscm_get_valid_command_smob_arg_unsafe for effect.
        * guile/scm-block.c (gdbscm_make_block_syms_iter): Call
        bkscm_get_valid_block_smob_arg_unsafe for effect.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * bfin-tdep.c (bfin_push_dummy_call): Use arg_type, not
        value_type.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * windows-nat.c (saved_context): Conditionally define.
        * remote.c (remote_target::remote_btrace_maybe_reopen):
        Conditionally declare "warned".
        * inflow.c (sigquit_ours): Conditionally define.
        (new_tty): Move "tty" declaration inside #if.
        * guile/guile.c (guile_datadir): Conditionally define.
        * charset.c (set_be_le_names): Move some declarations inside #if.
        * btrace.c (parse_xml_btrace): Move "errcode" declaration inside
        #if.
        (parse_xml_btrace_conf): Likewise.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * spu-tdep.c (spu_get_overlay_table): Remove unused variable.

2018-07-22  Tom Tromey  <tom@tromey.com>

        * guile/scm-value.c (gdbscm_value_call): Remove unused variables.
        * guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow)
        (vlscm_convert_typed_value_from_scheme): Remove unused variable.
        * buildsym-legacy.c (get_macro_table): Remove unused variable.
        * stack.c (frame_apply_level_command): Remove unused variable.
        * tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable.
        * sparc64-tdep.c (adi_examine_command): Remove unused variable.
        * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove
        unused variable.
        * nios2-tdep.c (nios2_push_dummy_call): Remove unused variable.
        * mep-tdep.c (mep_push_dummy_call): Remove unused variable.
        * ada-lang.c (ada_lookup_symbol_list_worker): Remove unused
        variable.
        * amd64-tdep.c (amd64_supply_xsave): Remove unused variable.
        * arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused
        variable.
        * breakpoint.c (check_no_tracepoint_commands, update_watchpoint):
        Remove unused variable.
        * cli/cli-script.c (recurse_read_control_structure): Remove unused
        variable.
        * common/tdesc.c (print_xml_feature::visit): Remove unused
        variable.
        * compile/compile-object-load.c (store_regs): Remove unused
        variables.
        * complaints.c (clear_complaints): Remove unused variable.
        * corelow.c (core_target_open): Remove unused variable.
        * fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused
        variable.
        * guile/scm-frame.c (gdbscm_frame_read_var): Remove unused
        variable.
        * guile/scm-symtab.c (stscm_print_sal_smob): Remove unused
        variable.
        * guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused
        variable.
        * guile/scm-utils.c (gdbscm_parse_function_args): Remove unused
        variable.
        * hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused
        variable.
        * ia64-tdep.c (examine_prologue): Remove unused variable.
        * infcall.c (run_inferior_call): Remove unused variable.
        * inferior.c (exit_inferior): Remove unused variable.
        * infrun.c (infrun_thread_ptid_changed): Remove unused variable.
        * linespec.c (decode_line_2): Remove unused variable.
        * linux-nat.c (super_close): Remove.
        * linux-tdep.c (linux_info_proc): Remove unused variable.
        * mi/mi-main.c (mi_execute_command): Remove unused variable.
        * microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache):
        Remove unused variable.
        * parse.c (find_minsym_type_and_address): Remove unused variable.
        * printcmd.c (info_symbol_command, printf_floating): Remove unused
        variable.
        * python/py-breakpoint.c (bppy_set_commands): Remove unused
        variable.
        * python/py-unwind.c (unwind_infopy_dealloc): Remove unused
        variables.
        * record-btrace.c (record_btrace_target::store_registers): Remove
        unused variable.
        (cmd_show_record_btrace_cpu): Remove unused variable.
        * riscv-tdep.c (riscv_register_reggroup_p)
        (riscv_push_dummy_call, riscv_return_value): Remove unused
        variable.
        * rust-exp.y (literal): Remove unused variable.
        * rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove
        unused variable.
        <STRUCTOP_ANONYMOUS>: Likewise.
        * s390-linux-tdep.c (s390_linux_init_abi_31)
        (s390_linux_init_abi_64): Remove unused variable.
        * ser-ming2.c (ser_windows_read_prim, pipe_select_thread)
        (file_select_thread, net_windows_open, _initialize_ser_windows):
        Remove unused variables.
        * symtab.c (find_pc_sect_line): Remove unused variable.
        * target-memory.c (compute_garbled_blocks): Remove unused
        variable.
        (target_write_memory_blocks): Remove unused variable.
        * target.c (target_stack::unpush): Remove unused variables.
        * tracepoint.c (start_tracing, all_tracepoint_actions)
        (merge_uploaded_trace_state_variables)
        (print_one_static_tracepoint_marker): Remove unused variable.
        * unittests/basic_string_view/element_access/char/1.cc (test01):
        Remove unused variable.
        * windows-nat.c (windows_continue, windows_add_all_dlls)
        (do_initial_windows_stuff, windows_nat_target::create_inferior):
        Remove unused variables.

2018-07-21  Simon Marchi  <simon.marchi@polymtl.ca>

        * arm-tdep.c (arm_gdbarch_init): Declare attr_arch and
        attr_profile in HAVE_ELF.
        * rs6000-tdep.c (bfd_uses_spe_extensions): Declare vector_abi in
        HAVE_ELF.

2018-07-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * frame.c (frame_register_unwind): Change parameter name.
        (frame_unwind_register): Likewise.
        (frame_unwind_register_value): Likewise.
        (frame_unwind_register_signed): Likewise.
        (frame_unwind_register_unsigned): Likewise.
        * frame.h (frame_register_unwind): Likewise.
        (frame_unwind_register): Likewise.
        (frame_unwind_register_value): Likewise.
        (frame_unwind_register_signed): Likewise.
        (frame_unwind_register_unsigned): Likewise.
        (frame_unwind_arch): Likewise.

2018-07-20  Maciej W. Rozycki  <macro@mips.com>

        * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
        ISA maintenance.

2018-07-20  Maciej W. Rozycki  <macro@mips.com>

        * mips-linux-nat.c (mips_linux_nat_target::read_description):
        Call `get_ptrace_pid' rather than extracting the ptrace PID by
        hand.

2018-07-20  Keith Seitz  <keiths@redhat.com>

        * buildsym.h (struct buildsym_compunit) <m_objfile, m_subfiles,
        m_main_subfile, m_comp_dir, m_producer, m_debugformat,
        m_compunit_symtab, m_language>: Add "m_" prefix.
        Update all uses.
        * buildsym.c: Update all uses.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym-legacy.h (record_line): Don't use record_line_ftype.
        * buildsym.h (record_line_ftype): Remove typedef.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym-legacy.h (augment_type_symtab): Don't declare.
        (end_expandable_symtab): Likewise.
        (end_symtab_get_static_block): Likewise.
        (end_symtab_from_static_block): Likewise.
        * buildsym-legacy.c (augment_type_symtab): Remove.
        (end_expandable_symtab): Remove.
        (end_symtab_get_static_block): Remove.
        (end_symtab_from_static_block): Remove.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c: Include buildsym.h.
        (struct dwarf2_cu) <builder>: New method.
        (fixup_go_packaging): Update.
        (process_full_comp_unit, process_full_type_unit): Update.  Don't
        use scoped_free_pendings.
        (using_directives): Add "cu" parameter, remove "language".
        (read_import_statement, setup_type_unit_groups, )
        (read_func_scope, read_lexical_block_scope)
        (dwarf2_record_block_ranges, read_namespace): Update.
        (lnp_state_machine::lnp_state_machine): Add cu parameter.
        (lnp_state_machine::handle_end_sequence): Update.
        (class lnp_state_machine) <m_cu>: New member.
        <m_record_line_callback>: Remove.
        <m_currently_recording_lines>: New member.
        (lnp_state_machine::handle_set_file): Update.
        (noop_record_line): Remove.
        (dwarf_record_line_p): Add cu parameter.
        (dwarf_record_line_1, dwarf_finish_line): Likewise.
        (lnp_state_machine::record_line)
        (lnp_state_machine::lnp_state_machine)
        (lnp_state_machine::check_line_address, dwarf_decode_lines_1)
        (dwarf_decode_lines): Update.
        (dwarf2_start_subfile): Add cu parameter.
        (dwarf2_start_symtab, new_symbol): Update.
        (macro_start_file, dwarf_decode_macro_bytes): Add cu parameter.
        Remove dwarf2_per_objfile parameter.
        (dwarf_decode_macros): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * stabsread.c (define_symbol): Update.
        * buildsym-legacy.h (get_buildsym_compunit): Declare.
        * dwarf2read.c (new_symbol): Update.
        * cp-support.h (cp_scan_for_anonymous_namespaces): Update.
        * cp-namespace.c: Include buildsym.h.
        (cp_scan_for_anonymous_namespaces): Add "compunit" parameter.
        * buildsym-legacy.c (get_buildsym_compunit): New function.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * xcoffread.c: Include buildsym-legacy.h.
        * windows-nat.c: Include buildsym-legacy.h.
        * stabsread.c: Include buildsym-legacy.h.
        * mdebugread.c: Include buildsym-legacy.h.
        * buildsym-legacy.h: New file.
        * buildsym-legacy.c: New file, from buildsym.c.
        * go32-nat.c: Include buildsym-legacy.h.
        * dwarf2read.c: Include buildsym-legacy.h.
        * dbxread.c: Include buildsym-legacy.h.
        * cp-namespace.c: Include buildsym-legacy.h.
        * coffread.c: Include buildsym-legacy.h.
        * buildsym.h: Move some contents to buildsym-legacy.h.
        * buildsym.c: Include buildsym-legacy.h.  Move many functions to
        buildsym-legacy.c.
        * Makefile.in (HFILES_NO_SRCDIR): Add buildsym-legacy.h.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.h (struct buildsym_compunit): Move from buildsym.c.
        * buildsym.c (struct buildsym_compunit): Move to buildsym.h.
        (buildsym_compunit::buildsym_compunit)
        (buildsym_compunit::~buildsym_compunit)
        (buildsym_compunit::get_macro_table): Define.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.c (reset_symtab_globals): Remove.
        (buildsym_compunit::end_symtab_from_static_block): Update.
        (buildsym_compunit::augment_type_symtab): Update.
        (end_symtab_from_static_block): Call free_buildsym_compunit.
        (augment_type_symtab, end_symtab, end_expandable_symtab):
        Likewise.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * arch-utils.c: Do not include buildsym.h.
        * mipsread.c: Do not include buildsym.h.
        * machoread.c: Do not include buildsym.h.
        * elfread.c: Do not include buildsym.h.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.c (buildsym_compunit::buildsym_compunit): Do more
        initialization.
        (buildsym_compunit): Add new constructor.
        (struct buildsym_compunit) <get_last_source_file, finish_block,
        record_block_range, start_subfile, patch_subfile_names,
        push_subfile, pop_subfile, record_line, get_compunit_symtab,
        set_last_source_start_addr, get_last_source_start_addr,
        get_local_using_directives, set_local_using_directives,
        get_global_using_directives, outermost_context_p,
        get_current_context_stack, get_context_stack_depth,
        get_current_subfile, get_local_symbols, get_file_symbols,
        get_global_symbols, record_debugformat, record_producer,
        push_context, pop_context, end_symtab_get_static_block,
        end_symtab_from_static_block, end_symtab, end_expandable_symtab>:
        New public methods.
        <record_pending_block, finish_block_internal, make_blockvector,
        watch_main_source_file_lossage, end_symtab_with_blockvector>: New
        private methods.
        Update all users.

2018-05-22  Tom Tromey  <tom@tromey.com>

        * buildsym.c (record_pending_block): Move earlier.  Remove objfile
        parameter.
        (finish_block_internal): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.c (record_pending_block): Move earlier.  Remove objfile
        parameter.
        (finish_block_internal): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.h (EXTERN): Don't define or undef.
        * buildsym.c (EXTERN): Don't define.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.c: Remove TODO comment.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * coffread.c (coff_symtab_read): Update.
        * xcoffread.c (xcoff_psymtab_to_symtab_1): Update.
        (xcoff_new_init): Update.
        * mipsread.c (mipscoff_new_init): Update.
        * mdebugread.c (mdebug_build_psymtabs): Update.
        * elfread.c (elf_new_init): Update.
        * dwarf2read.c (process_full_comp_unit, process_full_type_unit):
        Update.
        * dbxread.c (dbx_new_init, dbx_psymtab_to_symtab_1)
        (coffstab_build_psymtabs, elfstab_build_psymtabs)
        (stabsect_build_psymtabs): Update.
        * buildsym.h (buildsym_init): Don't declare.
        * buildsym.c: Update comment.
        (prepare_for_building): Remove.
        (start_symtab, restart_symtab): Update.
        (reset_symtab_globals): Update comment.
        (buildsym_init): Remove.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (read_xcoff_symtab, process_xcoff_symbol): Update.
        * stabsread.c (patch_block_stabs, define_symbol, read_type)
        (read_enum_type, common_block_start, common_block_end)
        (cleanup_undefined_types_1, finish_global_stabs): Update.
        * mdebugread.c (psymtab_to_symtab_1): Update.
        * dwarf2read.c (fixup_go_packaging, read_func_scope)
        (read_lexical_block_scope, new_symbol): Update.
        * dbxread.c (process_one_symbol): Update.
        * coffread.c (coff_symtab_read, process_coff_symbol)
        (coff_read_enum_type): Update.
        * buildsym.h (file_symbols, global_symbols, local_symbols): Don't
        declare.
        (get_local_symbols, get_file_symbols, get_global_symbols): New
        functions.
        * buildsym.c (~buildsym_compunit): Clean up m_file_symbols and
        m_global_symbols.
        <m_file_symbols, m_local_symbols, m_global_symbols>: New members.
        (~scoped_free_pendings): Update.
        (finish_block, prepare_for_building, reset_symtab_globals)
        (end_symtab_get_static_block, end_symtab_with_blockvector)
        (augment_type_symtab, push_context): Update.
        (get_local_symbols, get_file_symbols, get_global_symbols): New
        functions.
        (buildsym_init): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (process_full_comp_unit): Do not set list_in_scope.
        (process_full_type_unit): Likewise.
        (dwarf2_start_symtab): Set list_in_scope.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (process_psymtab_comp_unit_reader)
        (build_type_psymtabs_reader): Do not set list_in_scope.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.c (free_pendings): Remove.
        (add_symbol_to_list, scoped_free_pendings)
        (finish_block_internal, buildsym_init): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (read_xcoff_symtab): Update.
        * dwarf2read.c (read_func_scope, read_lexical_block_scope):
        Update.
        * dbxread.c (process_one_symbol): Update.
        * coffread.c (coff_symtab_read): Update.
        * buildsym.h (finish_block): Update.
        * buildsym.c (finish_block): Remove "listhead" argument.
        (end_symtab_get_static_block): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.h (class scoped_free_pendings): Remove constructor.
        * buildsym.c (struct buildsym_compunit) <free_pending_blocks>: New
        method.
        <m_pending_block_obstack, m_pending_blocks>: New members.
        (pending_block_obstack, pending_blocks): Remove.
        (scoped_free_pendings::scoped_free_pendings): Default.
        (~scoped_free_pendings): Update.
        (free_pending_blocks): Remove.
        (finish_block_internal, record_pending_block, make_blockvector)
        (end_symtab_get_static_block, augment_type_symtab, push_context)
        (buildsym_init): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * buildsym.c (struct buildsym_compunit) <m_pending_addrmap,
        m_pending_addrmap_obstack, m_pending_addrmap_interesting>: New
        members.
        (pending_addrmap, pending_addrmap_obstack)
        (pending_addrmap_interesting): Remove.
        (scoped_free_pendings, record_block_range, make_blockvector)
        (prepare_for_building, reset_symtab_globals, buildsym_init):
        Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (process_linenos): Update.
        * stabsread.c (define_symbol, read_type, read_enum_type): Update.
        * mdebugread.c (psymtab_to_symtab_1): Update.
        * dwarf2read.c (setup_type_unit_groups)
        (lnp_state_machine::handle_set_file, dwarf_record_line_p)
        (lnp_state_machine::record_line, dwarf_decode_lines): Update.
        * dbxread.c (process_one_symbol): Update.
        * coffread.c (coff_symtab_read, enter_linenos)
        (process_coff_symbol): Update.
        * buildsym.h (current_subfile): Don't declare.
        (get_current_subfile): Declare.
        * buildsym.c (struct buildsym_compunit) <m_current_subfile>: New
        member.
        (start_subfile, free_buildsym_compunit, push_subfile)
        (prepare_for_building, start_symtab): Update.
        (get_current_subfile): New function.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * coffread.c (coff_symtab_read): Update.
        * xcoffread.c (read_xcoff_symtab): Update.
        * dwarf2read.c (new_symbol): Update.
        (read_func_scope, read_lexical_block_scope): Update.
        * dbxread.c (process_one_symbol): Update.
        * buildsym.h (context_stack, context_stack_depth): Don't declare.
        (outermost_context_p): Remove macro.
        (outermost_context_p, get_current_context_stack)
        (get_context_stack_depth): Declare.
        (pop_context): Return struct context_stack.
        * buildsym.c (struct buildsym_compunit) <m_context_stack: New
        member.
        (context_stack_size): Remove.
        (INITIAL_CONTEXT_STACK_SIZE): Remove.
        (prepare_for_building, end_symtab_get_static_block)
        (augment_type_symtab, push_context): Update.
        (pop_context): Return struct context_stack.
        (outermost_context_p, get_current_context_stack)
        (get_context_stack_depth): New functions.
        (buildsym_init): Update.

2018-07-20  Tom Tromey  <tom@tromey.com>

        * rust-exp.y: Now a pure parser.  Update all rules.
        (%union): Move earlier.
        (current_parser, work_obstack): Remove globals.
        (rust_parser, ~rust_parser): Update.
        (class rust_parser) <copy_name, concat3, crate_name, super_name,
        lex_character, lex_number, lex_string, lex_identifier,
        rust_lookup_type, convert_params_to_types, convert_ast_to_type,
        convert_name, convert_params_to_expression,
        convert_ast_to_expression, ast_basic_type, ast_operation,
        ast_compound_assignment, rust_op, ast_literal, ast_dliteral,
        ast_structop, ast_structop_anonymous, ast_unary, ast_cast,
        ast_call_ish, ast_path, ast_string, ast_struct, ast_range,
        ast_array_type, ast_slice_type, ast_reference_type,
        ast_pointer_type, ast_function_type, ast_tuple_type>: New methods.
        (rust_parse): Update.
        (rustyyerror, rustyylex): Add parser parameter.
        (rust_lex_test_one, rust_lex_int_test, rust_lex_exception_test)
        (rust_lex_stringish_test, rust_lex_test_sequence)
        (rust_lex_test_trailing_dot, rust_lex_test_completion)
        (rust_lex_test_push_back, rust_lex_tests): Update.

2018-07-19  Pedro Alves  <palves@redhat.com>

        * guile/guile-internal.h (gdbscm_scm_to_c_string): Now returns a
        gdb::unique_xmalloc_ptr.
        * guile/scm-breakpoint.c (gdbscm_set_breakpoint_condition_x):
        Adjust to use dbscm_wrap and gdb::unique_xmalloc_ptr.
        * guile/scm-exception.c (gdbscm_exception_message_to_string): Use
        copy-initialization.
        * guile/scm-pretty-print.c (ppscm_print_children): Use
        gdb::unique_xmalloc_ptr instead of cleanups.
        (gdbscm_apply_val_pretty_printer): Remove cleanups.
        * guile/scm-string.c (gdbscm_scm_to_c_string): Now returns a
        gdb::unique_xmalloc_ptr.
        * guile/scm-type.c (gdbscm_type_field, gdbscm_type_has_field_p):
        Adjust to use gdb::unique_xmalloc_ptr.
        * guile/scm-utils.c (extract_arg): Adjust.
        * guile/scm-value.c (gdbscm_value_field): Adjust to use
        gdb::unique_xmalloc_ptr instead of a cleanup.

2018-07-19  Tom Tromey  <tom@tromey.com>

        * utils.c (do_value_free_to_mark)
        (make_cleanup_value_free_to_mark): Remove.
        * utils.h (make_cleanup_value_free_to_mark): Remove.

2018-07-19  Pedro Alves  <palves@redhat.com>

        * guile/guile-internal.h (gdbscm_wrap): Really make 'args' a
        forwarding reference.

2018-07-18  Pedro Alves  <palves@redhat.com>

        * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
        gdbscm_wrap.  Use gdb::unique_xmalloc_ptr<char> instead of a
        cleanup.

2018-07-18  Pedro Alves  <palves@redhat.com>

        * guile/guile-internal.h: Add comment about mixing GDB and Scheme
        exceptions.
        (GDBSCM_HANDLE_GDB_EXCEPTION_WITH_CLEANUPS): Delete.
        (gdbscm_wrap): New.
        * guile/scm-frame.c (gdbscm_frame_read_register): Use xfree
        directly instead of a cleanup.
        * guile/scm-math.c (vlscm_unop_gdbthrow): New, factored out from ...
        (vlscm_unop): ... this.  Reimplement using gdbscm_wrap.
        (vlscm_binop_gdbthrow): New, factored out from ...
        (vlscm_binop): ... this.  Reimplement using gdbscm_wrap.
        (vlscm_rich_compare): Use gdbscm_wrap.
        * guile/scm-symbol.c (gdbscm_lookup_symbol): Use xfree directly
        instead of a cleanup.
        (gdbscm_lookup_global_symbol): Use xfree directly instead of a
        cleanup.
        * guile/scm-type.c (gdbscm_type_field, gdbscm_type_has_field_p):
        Use xfree directly instead of a cleanup.
        * guile/scm-value.c (gdbscm_make_value, gdbscm_make_lazy_value):
        Adjust to use gdbscm_wrap and scoped_value_mark.
        (gdbscm_value_optimized_out_p): Adjust to use gdbscm_wrap.
        (gdbscm_value_address, gdbscm_value_dereference)
        (gdbscm_value_referenced_value): Adjust to use gdbscm_wrap and
        scoped_value_mark.
        (gdbscm_value_dynamic_type): Use scoped_value_mark.
        (vlscm_do_cast, gdbscm_value_field): Adjust to use gdbscm_wrap and
        scoped_value_mark.
        (gdbscm_value_subscript, gdbscm_value_call): Adjust to use
        gdbscm_wrap and scoped_value_mark.
        (gdbscm_value_to_string): Use xfree directly instead of a
        cleanup.  Move 'buffer' unique_ptr to TRY scope.
        (gdbscm_value_to_lazy_string): Use xfree directly instead of a
        cleanup.  Move 'buffer' unique_ptr to TRY scope.  Use
        scoped_value_mark.
        (gdbscm_value_fetch_lazy_x): Use gdbscm_wrap.
        (gdbscm_parse_and_eval): Adjust to use gdbscm_wrap and
        scoped_value_mark.
        (gdbscm_history_ref, gdbscm_history_append_x): Adjust to use
        gdbscm_wrap.

2018-07-18  Tom de Vries  <tdevries@suse.de>

        * findvar.c (default_read_var_value): Also resolve dynamic type for
        LOC_OPTIMIZED_OUT vars.

2018-07-18  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (micromips_next_pc): Add SYSCALL instruction
        decoding.

2018-07-17  Tom Tromey  <tom@tromey.com>

        * guile/scm-param.c (pascm_set_func, pascm_show_func)
        (compute_enum_list, pascm_set_param_value_x)
        (gdbscm_parameter_value): Update.
        * guile/guile-internal.h (gdbscm_scm_to_string): Update.
        (gdbscm_scm_to_host_string): Update.
        * guile/scm-math.c (vlscm_convert_typed_value_from_scheme):
        Update.
        * guile/scm-cmd.c (cmdscm_add_completion): Update.
        * guile/scm-pretty-print.c (ppscm_print_string_repr): Update.
        * guile/scm-string.c (gdbscm_scm_to_string): Return
        unique_xmalloc_ptr.
        (gdbscm_scm_to_host_string): Likewise.

2018-07-17  Tom Tromey  <tom@tromey.com>

        * guile/guile.c (gdbscm_eval_from_control_command): Update.
        * guile/guile-internal.h (gdbscm_safe_eval_string): Update.
        * guile/scm-objfile.c (gdbscm_execute_objfile_script): Update.
        * guile/scm-safe-call.c (gdbscm_safe_eval_string): Return
        unique_xmalloc_ptr.

2018-07-17  Tom Tromey  <tom@tromey.com>

        * guile/scm-param.c (pascm_signal_setshow_error): Update.
        * guile/guile-internal.h (gdbscm_exception_message_to_string):
        Update.
        * guile/scm-cmd.c (cmdscm_function): Update.
        * guile/scm-pretty-print.c
        (ppscm_print_exception_unless_memory_error): Update.
        * guile/scm-exception.c (gdbscm_exception_message_to_string):
        Return unique_xmalloc_ptr.

2018-07-17  Tom Tromey  <tom@tromey.com>

        * guile/scm-pretty-print.c (ppscm_make_pp_type_error_exception):
        Use string_printf.

2018-07-17  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (riscv_has_feature): Delete comment that refers to
        set_gdbarch_decr_pc_after_break.  Call riscv_read_misa_reg always.
        (riscv_gdbarch_init): Delete local has_compressed_isa.  Delete now
        unecessary braces after EF_RISCV_RVC test.  Delete call to
        set_gdbarch_decr_pc_after_break.

        * riscv-tdep.h (DECLARE_CSR): Use RISCV_FIRST_CSR_REGNUM instead of
        RISCV_LAST_FP_REGNUM + 1.
        (RSICV_CSR_LEGACY_MISA_REGNUM): Add RISCV_FIRST_CSR_REGNUM.

2018-07-17  Tom Tromey  <tom@tromey.com>

        * configure.ac: Remove --disable-gdbcli.
        * configure: Rebuild.
        * Makefile.in (SUBDIR_CLI_DEPS, SUBDIR_CLI_LDFLAGS)
        (SUBDIR_CLI_CFLAGS): Remove.
        (SFILES): Use SUBDIR_CLI_SRCS.
        (COMMON_OBS): Use SUBDIR_CLI_OBS.

2018-07-17  Tom Tromey  <tom@tromey.com>

        PR gdb/18624:
        * coffread.c (coff_symtab_read): Use scoped_free_pendings.

2018-07-16  Jim Wilson  <jimw@sifive.com>

        * riscv-tdep.c (riscv_gdbarch_init): Call gdbarch_init_osabi.

2018-07-16  Simon Marchi  <simon.marchi@ericsson.com>

        * ia64-libunwind-tdep.c (libunwind_frame_cache): Remove unused
        variable.
        (libunwind_frame_sniffer): Likewise.
        (libunwind_frame_prev_register): Likewise.
        (libunwind_sigtramp_frame_sniffer): Likewise.
        * ia64-tdep.c (ia64_access_reg): Likewise.
        (ia64_access_rse_reg): Likewise.
        (ia64_libunwind_sigtramp_frame_this_id): Likewise.
        * ia64-vms-tdep.c (ia64_vms_find_proc_info_x): Likewise.

2018-07-16  Simon Marchi  <simon.marchi@ericsson.com>

        * ia64-vms-tdep.c (ia64_vms_find_proc_info_x): Add cast.

2018-07-16  Simon Marchi  <simon.marchi@ericsson.com>

        * remote-sim.c (gdbsim_target::close,
        gdbsim_target::mourn_inferior): Remove unused variables.

2018-07-16  Simon Marchi  <simon.marchi@polymtl.ca>

        * ia64-tdep.c (ktab_buf): New global.
        (getunwind_table): Return a gdb::optional<gdb::byte_vector>.
        (get_kernel_table): Adjust.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (read_xcoff_symtab): Use outermost_context_p.
        * dwarf2read.c (using_directives, new_symbol): Use
        outermost_context_p.
        * dbxread.c (process_one_symbol): Use outermost_context_p.
        * coffread.c (coff_symtab_read): Use outermost_context_p.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (using_directives, read_func_scope)
        (read_lexical_block_scope): Update.
        * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
        * buildsym.h (local_using_directives, global_using_directives):
        Don't declare.
        (get_local_using_directives, set_local_using_directives)
        (get_global_using_directives): Declare.
        * buildsym.c (struct buildsym_compunit) <m_local_using_directives,
        m_global_using_directives>: New members.
        (finish_block_internal, prepare_for_building)
        (reset_symtab_globals, end_symtab_get_static_block)
        (push_context): Update.
        (get_local_using_directives, set_local_using_directives)
        (get_global_using_directives): New functions.
        (buildsym_init): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (xcoff_initial_scan): Don't call
        free_pending_blocks.
        * dbxread.c (dbx_symfile_read): Don't call free_pending_blocks.
        * buildsym.h (class scoped_free_pendings): Add constructor.
        (free_pending_blocks): Don't declare.
        * buildsym.c (scoped_free_pendings::scoped_free_pendings): New.
        (free_pending_blocks): Now static.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.h (push_subfile, pop_subfile): Update declarations.
        * buildsym.c (struct buildsym_compunit) <m_subfile_stack>: New
        member.
        (struct subfile_stack): Remove.
        (subfile_stack): Remove.
        (push_subfile, pop_subfile, buildsym_init): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (push_subfile): Use gdb_assert.
        (pop_subfile): Use gdb_assert.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.h (merge_symbol_lists): Remove.
        * buildsym.c (merge_symbol_lists): Remove.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * stabsread.c (scan_file_globals): Update comment.
        * stabsread.h (scan_file_globals): Move from buildsym.h.
        * buildsym.h (scan_file_globals): Move to stabsread.h.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (xcoff_new_init): Update.
        * mipsread.c (mipscoff_new_init): Update.
        * mdebugread.c (mdebug_build_psymtabs): Update.
        * elfread.c (elf_new_init): Update.
        * dbxread.c (dbx_new_init, coffstab_build_psymtabs)
        (elfstab_build_psymtabs, stabsect_build_psymtabs): Update.
        * buildsym.h (buildsym_new_init): Don't declare.
        * buildsym.c (buildsym_new_init): Remove.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * stabsread.h (within_function): Move from buildsym.h.
        * stabsread.c (start_stabs): Clear within_function.
        * coffread.c (coff_start_symtab): Clear within_function.
        * buildsym.h (within_function): Move to stabsread.h.
        * buildsym.c (prepare_for_building): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * stabsread.h (processing_gcc_compilation): Move from buildsym.h.
        * dwarf2read.c (dwarf2_start_symtab): Don't set
        processing_gcc_compilation.
        * buildsym.h (processing_gcc_compilation): Move to stabsread.h.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * stabsread.h (HASHSIZE, hashname, symnum, next_symbol_text)
        (next_symbol_text_func): Move from buildsym.h.
        * stabsread.c (hashname): Move from buildsym.c.
        * buildsym.h (HASHSIZE, symnum, next_symbol_text)
        (next_symbol_text_func, hashname): Move to stabsread.h.
        * buildsym.c: Don't include bcache.h
        (hashname): Move to stasbread.c.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.h (context_stack_size): Don't declare.
        * buildsym.c (context_stack_size): New global.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * dbxread.c (processing_acc_compilation): New global.
        * buildsym.h (processing_acc_compilation): Don't declare.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (aix_process_linenos, complete_symtab): Update.
        * dbxread.c (read_ofile_symtab): Update.
        * coffread.c (coff_start_symtab, coff_end_symtab): Update.
        * buildsym.h (last_source_start_addr): Remove.
        (set_last_source_start_addr, get_last_source_start_addr):
        Declare.
        * buildsym.c (buildsym_compunit::buildsym_compunit): Add last_addr
        parameter.
        (struct buildsym_compunit) <m_last_source_start_addr>: New
        member.
        (prepare_for_building): Remove start_addr parameter.
        (start_symtab, restart_symtab, end_symtab_get_static_block)
        (end_symtab_with_blockvector): Update.
        (set_last_source_start_addr, get_last_source_start_addr): New
        functions.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (struct buildsym_compunit) <m_have_line_numbers>: New
        member.
        (have_line_numbers): Remove.
        (record_line, prepare_for_building, end_symtab_get_static_block)
        (augment_type_symtab): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (~buildsym_compunit): Free the macro table.
        (struct buildsym_compunit) <get_macro_table, release_macros>: New
        methods.
        <m_pending_macros>: New member.
        (pending_macros): Remove.
        (~scoped_free_pendings, get_macro_table, prepare_for_building)
        (reset_symtab_globals, end_symtab_get_static_block)
        (end_symtab_with_blockvector, augment_type_symtab)
        (buildsym_init): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (buildsym_compunit::buildsym_compunit): Add name
        parameter.
        (buildsym_compunit::set_last_source_file): New method.
        <m_last_source_file>: New member.
        (prepare_for_building): Remove "name" parameter.
        (start_symtab, restart_symtab, reset_symtab_globals): Update.
        (last_source_file): Remove.
        (set_last_source_file, get_last_source_file): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (prepare_for_building): Add assert.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (~buildsym_compunit): Update.
        (struct buildsym_compunit) <comp_unit>: Now a unique_xmalloc_ptr.
        (start_subfile, patch_subfile_names)
        (end_symtab_with_blockvector): Update.

2018-07-16  Tom Tromey  <tom@tromey.com>

        * buildsym.c (struct buildsym_compunit): Add constructor,
        destructor, initializers.
        (start_buildsym_compunit): Remove.
        (free_buildsym_compunit): Use "delete".
        (start_symtab, restart_symtab): Use "new".

2018-07-13  Simon Marchi  <simon.marchi@polymtl.ca>

        * symfile.c (set_objfile_default_section_offset): Remove struct
        keyword.

2018-07-14  Stafford Horne  <shorne@gmail.com>

        * (Responsible Maintainers): Add myself as or1k maintainer.

2018-07-13  Tom Tromey  <tom@tromey.com>

        * symfile.c (set_objfile_default_section_offset): Use extra braces
        around initializer.

2018-07-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-tdep.c (s390_displaced_step_fixup): Adjust PC for a
        non-branching basr.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/cli-utils-selftests.c
        * unittests/cli-utils-selftests.c: New file.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * NEWS: Mention new commands. Mention change to 'thread apply'.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * thread.c (thr_try_catch_cmd): New function.
        (thread_apply_all_command): Handle qcs flags.
        (thread_apply_command): Handle qcs flags.
        (taas_command): New function.
        (tfaas_command): New function.
        (_initialize_thread): Update to setup the new commands 'taas
        and 'tfaas'. Change doc string for 'thread apply'.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * stack.c: (trailing_outermost_frame): New function, mostly
        extracted from backtrace_command_1.
        (leading_innermost_frame): New function.
        (backtrace_command_1): Update to call trailing_outermost_frame.
        (frame_apply_command_count): New function.
        (frame_apply_level_command): New function.
        (frame_apply_all_command): New function.
        (frame_apply_command): New function.
        (faas_command): New function.
        (frame_cmd_list): New variable.
        (_initialize_stack): Update to setup the new commands 'frame apply'
        and 'faas'.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * cli-utils.c (number_or_range_parser::get_number): Only handle
        numbers or convenience var as numbers.
        (parse_flags): New function.
        (parse_flags_qcs): New function.
        (number_or_range_parser::finished): Ensure parsing end is detected
        before end of string.
        * cli-utils.h (parse_flags): New function.
        (parse_flags_qcs): New function.
        (number_or_range_parser): Remove m_finished bool.
        (number_or_range_parser::skip_range): Set m_in_range to false.

2018-07-12  Sergio Durigan Junior  <sergiodj@redhat.com>

        * ser-tcp.c (try_connect): Declare 'ioarg' as 'u_long' if building
        on Windows.

2018-07-11  Sergio Durigan Junior  <sergiodj@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>
            Paul Fertser  <fercerpav@gmail.com>
            Tsutomu Seki  <sekiriki@gmail.com>
            Pedro Alves  <palves@redhat.com>

        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        'unittests/parse-connection-spec-selftests.c'.
        (COMMON_SFILES): Add 'common/netstuff.c'.
        (HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
        * NEWS (Changes since GDB 8.2): Mention IPv6 support.
        * common/netstuff.c: New file.
        * common/netstuff.h: New file.
        * ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
        (wait_for_connect): Update comment.  New parameter
        'gdb::optional<int> sock' instead of 'struct serial *scb'.
        Use 'sock' directly instead of 'scb->fd'.
        (try_connect): New function, with code from 'net_open'.
        (net_open): Rewrite main loop to deal with multiple
        sockets/addresses.  Handle IPv6-style hostnames; implement
        support for IPv6 connections.
        * unittests/parse-connection-spec-selftests.c: New file.

2018-07-11  Pedro Alves  <palves@redhat.com>

        PR gdb/23377
        * remote.c (remote_target::remote_detach_pid): Call
        set_current_process.

2018-07-11  Pedro Alves  <palves@redhat.com>

        * h8300-tdep.c (h8300_gdbarch_init): Remove
        set_gdbarch_ecoff_reg_to_regnum calls.

2018-07-11  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR c++/23373
        * c-typeprint.c (c_type_print_base_struct_union): Don't print
        offsets/sizes for static members of a class/struct.

2018-07-11  Alan Hayward  <alan.hayward@arm.com>

        * target-descriptions.c (tdesc_register_bitsize): Rename.
        * target-descriptions.h (tdesc_register_bitsize): Likewise.
        * rs6000-tdep.c (rs6000_gdbarch_init): Use new name.
        * aarch64-tdep.c (aarch64_get_tdesc_vq): Convert size.

2018-07-10  Tom Tromey  <tom@tromey.com>

        * breakpoint.c (moribund_locations): Now static and a
        std::vector.
        (breakpoint_init_inferior, moribund_breakpoint_here_p)
        (build_bpstat_chain, update_global_location_list)
        (breakpoint_retire_moribund): Update.
        * breakpoint.h (bp_location_p): Remove typedef.  Don't declare
        VEC.

2018-07-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_is_fp_regno_p): New function.
        (riscv_register_reggroup_p): Use new function, remove unneeded
        parenthesis.
        (riscv_push_dummy_call): Extend assert to compare against xlen or
        flen based on register type.

2018-07-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_print_arg_location): Use TYPE_SAFE_NAME.

2018-07-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * remote.c (show_hardware_watchpoint_limit): New function.
        (show_hardware_watchpoint_length_limit): New function.
        (show_hardware_breakpoint_limit): New function.
        (_initialize_remote): Use add_setshow_zuinteger_unlimited_cmd
        where appropriate, update help text.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (CDEPS): Don't mention XM_CDEPS.
        (CLIBS): Don't mention NAT_CLIBS.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (ADD_FILES, ADD_DEPS): Remove.
        (LIBGDB_OBS, clean mostlyclean): Update.
        (gdb$(EXEEXT), insight$(EXEEXT)): Update.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (%.c: %.y): Use ECHO_YACC.
        (%.c: %.l): Use ECHO_LEX.  Just fail if flex not available.
        * silent-rules.mk (ECHO_YACC, ECHO_LEX): New variables.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (ALLDEPFILES): Remove exec.c.
        (COMMON_OBS): Remove exec.o.
        (COMMON_SFILES): Add exec.c.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (LINT, LINTFLAGS, LINTFILES, lint): Remove.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (clean mostlyclean): Remove stamp-version.
        (version.c): Depend on stamp-version.
        (stamp-version): New rule, from version.c rule.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (init.c): Depend on stamp-init.
        (stamp-init): New rule, from init.c rule.
        (clean mostlyclean): Remove stamp-init.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (INIT_FILES): Remove CONFIG_SRCS,
        SUBDIR_GCC_COMPILE_SRCS.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (init.c): Remove some unused sed rules.

2018-07-09  Tom Tromey  <tom@tromey.com>

        * Makefile.in (TSOBS): Remove.
        (INIT_FILES): Update.
        (LIBGDB_OBS): Update.
        (COMMON_SFILES): Add inflow.c.
        (SFILES): Remove inflow.c.

2018-07-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * contrib/gdb-add-index.sh ($dwarf5): New, use it.

2018-07-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * ia64-libunwind-tdep.c (get_reg_name, get_fpreg_name,
        get_saveloc_name, is_signal_frame_name, step_name,
        init_remote_name, create_addr_space_name,
        destroy_addr_space_name, search_unwind_table_name,
        find_dyn_list_name): Constify.

2018-07-05  Simon Marchi  <simon.marchi@polymtl.ca>

        * darwin-nat.c (darwin_pthread_kill): New function.
        (darwin_resume_thread): Use darwin_pthread_kill.

2018-07-05  Tom de Vries  <tdevries@suse.de>

        * macroexp.c (macro_buffer) <operator=>: New member function.

2018-07-04  Tom Tromey  <tom@tromey.com>

        * darwin-nat.c (darwin_attach_pid): Use exit_inferior.

2018-07-04  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/common-defs.h (HAVE_USEFUL_SBRK): Define.
        * main.c: Use HAVE_USEFUL_SBRK instead of HAVE_SBRK.
        * maint.c: Likewise.
        * top.c: Likewise.

2018-07-04  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2018-07-04  Joel Brobecker  <brobecker@adacore.com>

        GDB 8.2 branch created (1b919490e8ba30bf1d6941df0ed112b0e557017e):
        * version.in: Bump version to 8.2.50.DATE-git.

2018-07-04  Vyacheslav Barinov  <v.barinov@samsung.com>
            Pedro Alves  <palves@redhat.com>

        * linux-nat.c (linux_init_ptrace): Rename to ...
        (linux_init_ptrace_procfs): ... this.  Call
        linux_proc_init_warnings.
        (linux_nat_target::post_attach)
        (linux_nat_target::post_startup_inferior): Adjust.
        * nat/linux-procfs.c (linux_proc_init_warnings): Define function.
        * nat/linux-procfs.h (linux_proc_init_warnings): Declare function.

2018-07-04  Tom de Vries  <tdevries@suse.de>

        * dwarf2read.c (error_check_comp_unit_head): Move dwarf version
        check ...
        (read_comp_unit_head): ... here.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (process_tracepoint_on_disconnect, start_tracing)
        (stop_tracing, tstatus_command)
        (find_matching_tracepoint_location, merge_uploaded_tracepoints)
        (print_one_static_tracepoint_marker): Update.
        * breakpoint.c (static_tracepoints_here, all_tracepoints): Return
        std::vector.
        * breakpoint.h (breakpoint_p): Remove typedef.  Don't declare
        VEC.
        (all_tracepoints, static_tracepoints_here): Return std::vector.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_equal): Remove.
        * common/ptid.h (ptid_equal): Don't declare.
        * ada-tasks.c: Update.
        * breakpoint.c: Update.
        * common/agent.c: Update.
        * corelow.c: Update.
        * darwin-nat-info.c: Update.
        * darwin-nat.c: Update.
        * dcache.c: Update.
        * dtrace-probe.c: Update.
        * dummy-frame.c: Update.
        * fbsd-nat.c: Update.
        * frame.c: Update.
        * gdbthread.h: Update.
        * gnu-nat.c: Update.
        * go32-nat.c: Update.
        * inf-loop.c: Update.
        * inf-ptrace.c: Update.
        * infcall.c: Update.
        * infcmd.c: Update.
        * inflow.c: Update.
        * infrun.c: Update.
        * linux-fork.c: Update.
        * linux-nat.c: Update.
        * linux-thread-db.c: Update.
        * mi/mi-cmd-var.c: Update.
        * mi/mi-interp.c: Update.
        * mi/mi-main.c: Update.
        * nto-procfs.c: Update.
        * ppc-linux-tdep.c: Update.
        * procfs.c: Update.
        * python/py-inferior.c: Update.
        * python/py-record-btrace.c: Update.
        * python/py-record.c: Update.
        * ravenscar-thread.c: Update.
        * regcache.c: Update.
        * remote-sim.c: Update.
        * remote.c: Update.
        * sol-thread.c: Update.
        * solib.c: Update.
        * target.c: Update.
        * tui/tui-stack.c: Update.
        * varobj.c: Update.
        * windows-nat.c: Update.
        * windows-tdep.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_match): Remove.
        * common/ptid.h (ptid_match): Don't declare.
        * fbsd-nat.c: Update.
        * infcmd.c: Update.
        * infrun.c: Update.
        * linux-nat.c: Update.
        * record-btrace.c: Update.
        * regcache.c: Update.
        * remote.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_tid_p): Remove.
        * common/ptid.h (ptid_tid_p): Don't declare.
        * sol-thread.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_lwp_p): Remove.
        * common/ptid.h (ptid_lwp_p): Don't declare.
        * fbsd-nat.c: Update.
        * linux-nat.c: Update.
        * nat/linux-procfs.c: Update.
        * nat/x86-linux-dregs.c: Update.
        * sol-thread.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_is_pid): Remove.
        * common/ptid.h (ptid_is_pid): Don't declare.
        * infrun.c: Update.
        * linux-nat.c: Update.
        * mi/mi-interp.c: Update.
        * remote.c: Update.
        * thread.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_get_tid): Remove.
        * common/ptid.h (ptid_get_tid): Don't declare.
        * ada-tasks.c: Update.
        * aix-thread.c: Update.
        * bsd-uthread.c: Update.
        * darwin-nat.c: Update.
        * fbsd-nat.c: Update.
        * i386-darwin-nat.c: Update.
        * infrun.c: Update.
        * linux-tdep.c: Update.
        * nto-procfs.c: Update.
        * ppc-ravenscar-thread.c: Update.
        * python/py-infthread.c: Update.
        * ravenscar-thread.c: Update.
        * sol-thread.c: Update.
        * sparc-ravenscar-thread.c: Update.
        * windows-nat.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_get_lwp): Remove.
        * common/ptid.h (ptid_get_lwp): Don't declare.
        * aarch64-linux-nat.c: Update.
        * ada-tasks.c: Update.
        * aix-thread.c: Update.
        * amd64-linux-nat.c: Update.
        * arm-linux-nat.c: Update.
        * corelow.c: Update.
        * fbsd-nat.c: Update.
        * fbsd-tdep.c: Update.
        * gnu-nat.c: Update.
        * i386-cygwin-tdep.c: Update.
        * i386-gnu-nat.c: Update.
        * i386-linux-nat.c: Update.
        * ia64-linux-nat.c: Update.
        * inf-ptrace.c: Update.
        * infrun.c: Update.
        * linux-fork.c: Update.
        * linux-nat.c: Update.
        * linux-tdep.c: Update.
        * linux-thread-db.c: Update.
        * mips-linux-nat.c: Update.
        * nat/aarch64-linux-hw-point.c: Update.
        * nat/aarch64-linux.c: Update.
        * nat/linux-btrace.c: Update.
        * nat/linux-osdata.c: Update.
        * nat/linux-procfs.c: Update.
        * nat/x86-linux-dregs.c: Update.
        * obsd-nat.c: Update.
        * ppc-fbsd-nat.c: Update.
        * ppc-linux-nat.c: Update.
        * procfs.c: Update.
        * python/py-infthread.c: Update.
        * ravenscar-thread.c: Update.
        * remote.c: Update.
        * s390-linux-nat.c: Update.
        * sol-thread.c: Update.
        * sol2-tdep.c: Update.
        * spu-linux-nat.c: Update.
        * x86-linux-nat.c: Update.
        * xtensa-linux-nat.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (ptid_get_pid): Remove.
        * common/ptid.h (ptid_get_pid): Don't declare.
        * aarch64-linux-nat.c: Update.
        * ada-lang.c: Update.
        * aix-thread.c: Update.
        * alpha-bsd-nat.c: Update.
        * amd64-fbsd-nat.c: Update.
        * amd64-linux-nat.c: Update.
        * arm-linux-nat.c: Update.
        * arm-nbsd-nat.c: Update.
        * auxv.c: Update.
        * break-catch-syscall.c: Update.
        * breakpoint.c: Update.
        * bsd-uthread.c: Update.
        * corelow.c: Update.
        * ctf.c: Update.
        * darwin-nat.c: Update.
        * fbsd-nat.c: Update.
        * fbsd-tdep.c: Update.
        * gcore.c: Update.
        * gnu-nat.c: Update.
        * hppa-nbsd-nat.c: Update.
        * hppa-obsd-nat.c: Update.
        * i386-fbsd-nat.c: Update.
        * ia64-linux-nat.c: Update.
        * inf-ptrace.c: Update.
        * infcmd.c: Update.
        * inferior.c: Update.
        * inferior.h: Update.
        * inflow.c: Update.
        * infrun.c: Update.
        * linux-fork.c: Update.
        * linux-nat.c: Update.
        * linux-tdep.c: Update.
        * linux-thread-db.c: Update.
        * m68k-bsd-nat.c: Update.
        * mi/mi-interp.c: Update.
        * mi/mi-main.c: Update.
        * mips-linux-nat.c: Update.
        * mips-nbsd-nat.c: Update.
        * mips64-obsd-nat.c: Update.
        * nat/aarch64-linux-hw-point.c: Update.
        * nat/aarch64-linux.c: Update.
        * nat/linux-btrace.c: Update.
        * nat/linux-osdata.c: Update.
        * nat/linux-procfs.c: Update.
        * nat/x86-linux-dregs.c: Update.
        * nto-procfs.c: Update.
        * obsd-nat.c: Update.
        * ppc-linux-nat.c: Update.
        * ppc-nbsd-nat.c: Update.
        * ppc-obsd-nat.c: Update.
        * proc-service.c: Update.
        * procfs.c: Update.
        * python/py-inferior.c: Update.
        * python/py-infthread.c: Update.
        * ravenscar-thread.c: Update.
        * record.c: Update.
        * remote-sim.c: Update.
        * remote.c: Update.
        * rs6000-nat.c: Update.
        * s390-linux-nat.c: Update.
        * sh-nbsd-nat.c: Update.
        * sol-thread.c: Update.
        * sparc-nat.c: Update.
        * sparc64-tdep.c: Update.
        * spu-linux-nat.c: Update.
        * spu-tdep.c: Update.
        * target-debug.h: Update.
        * target.c: Update.
        * thread.c: Update.
        * tid-parse.c: Update.
        * tracefile-tfile.c: Update.
        * vax-bsd-nat.c: Update.
        * windows-nat.c: Update.
        * x86-linux-nat.c: Update.
        * x86-nat.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.c (pid_to_ptid): Remove.
        * common/ptid.h (pid_to_ptid): Don't declare.
        * aix-thread.c: Update.
        * arm-linux-nat.c: Update.
        * common/ptid.c: Update.
        * common/ptid.h: Update.
        * corelow.c: Update.
        * ctf.c: Update.
        * darwin-nat.c: Update.
        * fbsd-nat.c: Update.
        * fork-child.c: Update.
        * gnu-nat.c: Update.
        * go32-nat.c: Update.
        * inf-ptrace.c: Update.
        * infcmd.c: Update.
        * inferior.c: Update.
        * infrun.c: Update.
        * linux-fork.c: Update.
        * linux-nat.c: Update.
        * nat/aarch64-linux-hw-point.c: Update.
        * nat/fork-inferior.c: Update.
        * nat/x86-linux-dregs.c: Update.
        * nto-procfs.c: Update.
        * obsd-nat.c: Update.
        * procfs.c: Update.
        * progspace.c: Update.
        * remote.c: Update.
        * rs6000-nat.c: Update.
        * s390-linux-nat.c: Update.
        * sol-thread.c: Update.
        * spu-linux-nat.c: Update.
        * target.c: Update.
        * top.c: Update.
        * tracefile-tfile.c: Update.
        * windows-nat.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * common/ptid.h (ptid_build): Don't declare.
        * common/ptid.c (ptid_build): Remove.
        * aix-thread.c: Update.
        * bsd-kvm.c: Update.
        * bsd-uthread.c: Update.
        * common/agent.c: Update.
        * common/ptid.c: Update.
        * common/ptid.h: Update.
        * corelow.c: Update.
        * darwin-nat.c: Update.
        * fbsd-nat.c: Update.
        * gnu-nat.c: Update.
        * linux-fork.c: Update.
        * linux-nat.c: Update.
        * linux-thread-db.c: Update.
        * nat/linux-osdata.c: Update.
        * nat/linux-procfs.c: Update.
        * nto-procfs.c: Update.
        * obsd-nat.c: Update.
        * proc-service.c: Update.
        * procfs.c: Update.
        * ravenscar-thread.c: Update.
        * remote-sim.c: Update.
        * remote.c: Update.
        * sol-thread.c: Update.
        * target.c: Update.
        * windows-nat.c: Update.

2018-07-03  Tom Tromey  <tom@tromey.com>

        * infrun.c (follow_exec): Use exit_inferior_silent.
        * inferior.c (exit_inferior_num_silent): Remove.
        * inferior.h (exit_inferior_num_silent): Don't declare.

2018-07-03  Tom Tromey  <tom@tromey.com>

        PR cli/23340:
        * darwin-nat.c (darwin_attach_pid): Reset inferior and
        inferior_ptid on error.

2018-07-02  Maciej W. Rozycki  <macro@mips.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        PR tdep/8282
        * disasm.h (gdb_disassembler): Add
        `m_disassembler_options_holder'. member
        * disasm.c (get_all_disassembler_options): New function.
        (gdb_disassembler::gdb_disassembler): Use it.
        (gdb_buffered_insn_length_init_dis): Likewise.
        (gdb_buffered_insn_length): Adjust accordingly.
        (set_disassembler_options): Handle options with arguments.
        (show_disassembler_options_sfunc): Likewise.  Add a leading new
        line if showing options with descriptions.
        (disassembler_options_completer): Adapt to using the
        `disasm_options_and_args_t' structure.
        * mips-tdep.c (mips_disassembler_options): New variable.
        (mips_disassembler_options_o32): Likewise.
        (mips_disassembler_options_n32): Likewise.
        (mips_disassembler_options_n64): Likewise.
        (gdb_print_insn_mips): Don't set `disassembler_options'.
        (gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
        functions.
        (mips_gdbarch_init): Always set `gdbarch_print_insn' to
        `gdb_print_insn_mips'.  Set `gdbarch_disassembler_options',
        `gdbarch_disassembler_options_implicit' and
        `gdbarch_valid_disassembler_options'.
        * arm-tdep.c (_initialize_arm_tdep): Adapt to using the
        `disasm_options_and_args_t' structure.
        * gdbarch.sh (disassembler_options_implicit): New `gdbarch'
        method.
        (valid_disassembler_options): Switch from `disasm_options_t' to
        the `disasm_options_and_args_t' structure.
        * NEWS: Document `set disassembler-options' support for the MIPS
        target.
        * gdbarch.h: Regenerate.
        * gdbarch.c: Regenerate.

2018-07-02  Sebastian Huber  <sebastian.huber@embedded-brains.de>

        * riscv-tdep.c (riscv_register_aliases): Swap "fp" and "s0" entries.

2018-06-29  Joel Brobecker  <brobecker@adacore.com>

        * amd64-darwin-tdep.c (x86_darwin_init_abi_64): Add missing
        parameter in call to amd64_target_description.
        * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
        * amd64-fbsd-tdep.c (amd64fbsd_core_read_description)
        (amd64fbsd_init_abi): Likewise.
        * amd64-nbsd-tdep.c (amd64nbsd_init_abi): Likewise.
        * amd64-obsd-tdep.c (amd64obsd_init_abi): Likewise.
        * amd64-sol2-tdep.c (amd64_sol2_init_abi): Likewise.
        * amd64-fbsd-nat.c (amd64_fbsd_nat_target): Likewise.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * gdb/amd64-tdep.h (amd64_create_target_description): Add
        "segments" parameter.
        * gdb/amd64-tdep.c (amd64_none_init_abi, amd64_x32_none_init_abi)
        (_initialize_amd64_tdep): Update call to
        amd64_create_target_description.
        (amd64_target_description): Add "segments" parameter.  Adjust
        the implementation to use it.
        * gdb/amd64-linux-tdep.c (amd64_linux_read_description): Update
        call to amd64_create_target_description.
        * gdb/amd64-windows-tdep.c (amd64_windows_init_abi): Likewise.
        * gdb/arch/amd64.h (amd64_create_target_description): Add
        "segments" register.
        * gdb/arch/amd64.c (amd64_create_target_description): Add
        "segments" parameter.  Call create_feature_i386_64bit_segments
        only if SEGMENTS is true.
        * gdb/gdbserver/win32-i386-low.c (i386_arch_setup): Update
        call to amd64_create_target_description.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * thread.c (thread_target_id_str): New, factored out from ...
        (print_thread_info_1): ... here.  Use it to compute the max
        "Target Id" column width.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_target::extra_thread_info): Delete
        'display_buf' and 'n' locals.  from the cache, regardless of
        packet mechanims is in use.  Use cache for qThreadExtra and qP
        methods too.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * blockframe.c (find_pc_sect_containing_function): New function.
        * breakpoint.c (print_breakpoint_location): Don't call
        find_pc_sect_function.
        * linespec.c (create_sals_line_offset): Record the location's
        symbol in the sal.
        * linespec.c (convert_address_location_to_sals): Fill in sal's
        symbol with find_pc_sect_containing_function.
        * symtab.c (find_function_start_sal): Rename to ...
        (find_function_start_sal_1): ... this.
        (find_function_start_sal): Reimplement as wrapper around
        find_function_start_sal_1, and use
        find_pc_sect_containing_function to fill in the sal's symbol.
        (find_function_start_sal(symbol*, bool)): Adjust.
        * symtab.h (find_pc_function, find_pc_sect_function): Adjust
        comments.
        (find_pc_sect_containing_function): Declare.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * inline-frame.c (stopped_by_user_bp_inline_frame): Return
        true if the the location has no symbol.

2018-06-28  Tom Tromey  <tom@tromey.com>

        * NEWS: Mention --enable-codesign.
        * silent-rules.mk (ECHO_SIGN): New variable.
        * configure.ac: Add --enable-codesign.
        * configure: Rebuild.
        * Makefile.in (CODESIGN, CODESIGN_CERT): New variables.
        (gdb$(EXEEXT)): Optionally invoke codesign.

2018-06-28  Pedro Alves  <palves@redhat.com>

        * gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend
        comments.
        (switch_to_thread_no_regs): Adjust comment.
        * infcmd.c (stop_pc): Delete.
        (post_create_inferior, info_program_command): Replace references
        to stop_pc with references to thread_info->suspend.stop_pc.
        * inferior.h (stop_pc): Delete declaration.
        * infrun.c (proceed, handle_syscall_event, fill_in_stop_func)
        (handle_inferior_event_1, handle_signal_stop)
        (process_event_stop_test, keep_going_stepped_thread)
        (handle_step_into_function, handle_step_into_function_backward)
        (print_stop_location): Replace references to stop_pc with
        references to thread_info->suspend.stop_pc.
        (struct infcall_suspend_state) <stop_pc>: Delete field.
        (save_infcall_suspend_state, restore_infcall_suspend_state):
        Remove references to inf_stat->stop_pc.
        * linux-fork.c (fork_load_infrun_state): Likewise.
        * record-btrace.c (record_btrace_set_replay): Likewise.
        * record-full.c (record_full_goto_entry): Likewise.
        * remote.c (print_one_stopped_thread): Likewise.
        * target.c (target_resume): Extend comment.
        * thread.c (set_executing_thread): New.
        (set_executing): Use it.
        (switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread):
        Remove references to stop_pc.

2018-06-28  Pedro Alves  <palves@redhat.com>

        * infrun.c (handle_inferior_event_1) <TARGET_WAITKIND_EXECD>:
        Moving fetching stop_pc until after ecs->event_thread is refreshed.

2018-06-28  Tom Tromey  <tom@tromey.com>

        * coffread.c (coff_symfile_finish): Update.
        * xcoffread.c (xcoff_symfile_finish): Update.
        * elfread.c (elf_symfile_finish): Update.
        * symfile.h (dwarf2_free_objfile): Don't declare.
        * dwarf2read.c (_initialize_dwarf2_read): Use
        register_objfile_data_with_cleanup.
        (dwarf2_free_objfile): Now static.  Change signature.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * symfile.c (add_symbol_file_command, _initialize_symfile): Add
        option "-o" to add-symbol-file-load to add an offset to each
        section's load address.
        * symfile.c (set_objfile_default_section_offset): New function.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * symfile.c (add_symbol_file_command): Make sure that sections
        with the same name are sorted in the same order.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * symfile.c (add_symbol_file_command, _initialize_symfile): Do not
        require the second argument.  If omitted, load sections at the
        addresses specified in the file.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * symfile.c (symbol_file_command, symbol_file_add_main_1)
        (_initialize_symfile): Add option "-o" to symbol-file to add an
        offset to each section of the symbol file.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * MAINTAINERS (Write After Approval): Add Petr Tesarik.

2018-06-27  Tom Tromey  <tom@tromey.com>

        * stack.c (_initialize_stack): Update "func" help text.

2018-06-27  Tom Tromey  <tom@tromey.com>

        * python/py-unwind.c (unwind_info_object) <saved_regs>: Now a
        std::vector.
        (unwind_infopy_str, pyuw_create_unwind_info)
        (unwind_infopy_add_saved_register, pyuw_sniffer)
        (unwind_infopy_dealloc, unwind_infopy_add_saved_register):
        Update.
        (struct saved_reg): Add constructor.
        <value>: Now a gdbpy_ref<>.

2018-06-27  Tom Tromey  <tom@tromey.com>

        * machoread.c (macho_symfile_read): Define "symbol_table" earlier.

2018-06-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb-gdb.py.in: Format using autopep8.

2018-06-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb-gdb.py.in (CoreAddrPrettyPrinter): New class.
        (type_lookup_function): Recognize CORE_ADDR values.

2018-06-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb-gdb.py.in (StructMainTypePrettyPrinter) <to_string>: Don't
        print tag_name.

2018-06-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb-gdb.py.in (TypeFlag) <__cmp__>: Remove.
        <__lt__>: Add.

2018-06-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb-gdb.py: Move to...
        * gdb-gdb.py.in: ... here.
        * configure.ac (AC_CONFIG_FILES): Add gdb-gdb.py.
        * Makefile.in (all): Add gdb-gdb.gdb and gdb-gdb.py as
        dependencies.
        (distclean): Remove gdb-gdb.py when cleaning.
        (gdb-gdb.py, gdb-gdb.gdb): New rules.
        * configure: Re-generate.

2018-06-27  Pedro Alves  <palves@redhat.com>

        * proc-service.c (get_ps_regcache): New.
        (ps_lgetregs, ps_lsetregs, ps_lgetfpregs)
        (ps_lsetfpregs): Use it.

2018-06-27  Omair Javaid  <omair.javaid@linaro.org>

        PR gdb/21695
        * dwarf2read.c (lnp_state_machine::check_line_address): Update
        declaration.
        (dwarf_decode_lines_1): Adjust.

2018-06-27  Simon Marchi  <simon.marchi@ericsson.com>

        * fbsd-nat.h (class fbsd_nat_target) <find_memory_regions>: Add
        override.
        <info_proc>: Likewise.

2018-06-26  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (do_windows_fetch_inferior_registers): Rename
        to windows_fetch_one_register, and only handle the case of
        fetching one register.  Move the code that reloads the context
        and iterates over all registers if R is negative to...
        (windows_nat_target::fetch_registers): ... here.
        (do_windows_store_inferior_registers): Rename to
        windows_store_one_register, and only handle the case of storing
        one register.  Move the code that handles the case where r is
        negative to...
        (windows_nat_target::store_registers) ... here.

2018-06-26  Tom Tromey  <tom@tromey.com>

        PR rust/22574:
        * typeprint.c (whatis_exp): Allow ptype/o for Rust.
        * rust-lang.c (rust_print_struct_def): Add podata parameter.
        Update.
        (rust_internal_print_type): Add podata parameter.
        (rust_print_type): Update.

2018-06-26  Tom Tromey  <tom@tromey.com>

        * typeprint.h (struct print_offset_data) <update, finish,
        maybe_print_hole>: New methods.
        <indentation>: New constant.
        * typeprint.c (print_offset_data::indentation): Define.
        (print_offset_data::maybe_print_hole, print_offset_data::update)
        (print_offset_data::finish): Move from c-typeprint.c and rename.
        * c-typeprint.c (OFFSET_SPC_LEN): Remove.
        (print_spaces_filtered_with_print_options): Update.
        (c_print_type_union_field_offset, maybe_print_hole)
        (c_print_type_struct_field_offset): Move to typeprint.c and
        rename.
        (c_type_print_base_struct_union): Update.

2018-06-25  Pedro Alves  <palves@redhat.com>

        * gdbthread.h (thread_info_ref, delete_thread)
        (delete_thread_silent, first_thread_of_inferior)
        (any_thread_of_inferior, switch_to_thread)
        (enable_thread_stack_temporaries)
        (thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
        (get_last_thread_stack_temporary)
        (value_in_thread_stack_temporaries, can_access_registers_thread):
        Spell out "struct thread_info" instead of just "thread_info".
        * inferior.h (notice_new_inferior): Likewise.

2018-06-25  Pedro Alves  <palves@redhat.com>

        * windows-nat.c (windows_delete_thread): Use find_thread_ptid and
        pass thread_info pointer to delete_thread.
        (windows_nat_target::detach): Pass inferior pointer to
        detach_inferior.
        * aix-thread.c (sync_threadlists): Pass thread_info pointer to
        delete_thread.
        * bsd-kvm.c (bsd_kvm_target::close): Use discard_all_inferiors.
        * darwin-nat.c (darwin_check_new_threads): Use find_thread_ptid
        and pass a thread_info pointer to delete_thread.
        * fbsd-nat.c (fbsd_nat_target::wait): Use find_thread_ptid and
        pass thread_info pointer to delete_thread.
        * go32-nat.c (go32_nat_target::mourn_inferior): Remove
        delete_thread_silent call.
        * procfs.c (procfs_target::detach): Pass inferior pointer to
        detach_inferior.
        (procfs_target::wait): Pass thread_info pointer to delete_thread.
        * remote-sim.c (gdbsim_target::mourn_inferior): Remove
        delete_thread_silent call.
        * windows-nat.c (windows_delete_thread): Use find_thread_ptid and
        pass thread_info pointer to delete_thread.
        (windows_nat_target::detach): Pass inferior pointer to
        delete_inferior.

2018-06-22  Alan Hayward  <alan.hayward@arm.com>

        * regcache.c (readable_regcache::read_part): Fix asserts.
        (reg_buffer::raw_collect_part): New function.
        (regcache::write_part): Fix asserts.
        (reg_buffer::raw_supply_part): New function.
        (regcache::transfer_regset_register): New helper function.
        (regcache::transfer_regset): Call new functions.
        (regcache_supply_regset): Use gdb_byte*.
        (regcache::supply_regset): Likewise.
        (regcache_collect_regset): Likewise.
        (regcache::collect_regset): Likewise.
        * regcache.h (reg_buffer::raw_collect_part): New declaration.
        (reg_buffer::raw_supply_part): Likewise.
        (regcache::transfer_regset_register): Likewise.
        (regcache::transfer_regset): Use gdb_byte*.

2018-06-22  Alan Hayward  <alan.hayward@arm.com>

        * nat/aarch64-sve-linux-ptrace.h (HAS_SVE_STATE): Use &.

2018-06-21  Pedro Alves  <palves@redhat.com>

        * ada-lang.h (ada_get_task_number): Take a thread_info pointer
        instead of a ptid_t.  All callers adjusted.
        * ada-tasks.c (ada_get_task_number): Likewise.  All callers
        adjusted.
        (print_ada_task_info, display_current_task_id, task_command_1):
        Adjust.
        * breakpoint.c (watchpoint_in_thread_scope): Adjust to use
        inferior_thread.
        (breakpoint_kind): Adjust.
        (remove_breakpoints_pid): Rename to ...
        (remove_breakpoints_inf): ... this.  Adjust to take an inferior
        pointer.  All callers adjusted.
        (bpstat_clear_actions): Use inferior_thread.
        (get_bpstat_thread): New.
        (bpstat_do_actions): Use it.
        (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
        to take a thread_info pointer.  All callers adjusted.
        (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
        (breakpoint_re_set_thread): Use inferior_thread.
        * breakpoint.h (struct inferior): Forward declare.
        (bpstat_stop_status): Update.
        (remove_breakpoints_pid): Delete.
        (remove_breakpoints_inf): New.
        * bsd-uthread.c (bsd_uthread_target::wait)
        (bsd_uthread_target::update_thread_list): Use find_thread_ptid.
        * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
        (maint_btrace_packet_history_cmd)
        (maint_btrace_clear_packet_history_cmd): Adjust.
        (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
        inferior_thread.
        * cli/cli-interp.c: Include "inferior.h".
        * common/refcounted-object.h (struct
        refcounted_object_ref_policy): New.
        * compile/compile-object-load.c: Include gdbthread.h.
        (store_regs): Use inferior_thread.
        * corelow.c (core_target::close): Use current_inferior.
        (core_target_open): Adjust to use first_thread_of_inferior and use
        the current inferior.
        * ctf.c (ctf_target::close): Adjust to use current_inferior.
        * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
        <thread>: ... this new field.  All references adjusted.
        (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
        Take a thread_info pointer instead of a ptid_t.
        * dummy-frame.h (dummy_frame_push, dummy_frame_pop)
        (dummy_frame_discard, register_dummy_frame_dtor): Take a
        thread_info pointer instead of a ptid_t.
        * elfread.c: Include "inferior.h".
        (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
        Use inferior_thread.
        * eval.c (evaluate_subexp): Likewise.
        * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
        inferior_thread.
        * gdb_proc_service.h (struct thread_info): Forward declare.
        (struct ps_prochandle) <ptid>: Delete, replaced by ...
        <thread>: ... this new field.  All references adjusted.
        * gdbarch.h, gdbarch.c: Regenerate.
        * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
        'thread' parameter.  All implementations and callers adjusted.
        * gdbthread.h (thread_info) <set_running>: New method.
        (delete_thread, delete_thread_silent): Take a thread_info pointer
        instead of a ptid.
        (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
        (first_thread_of_process): Delete, replaced by ...
        (first_thread_of_inferior): ... this new function.  All callers
        adjusted.
        (any_live_thread_of_process): Delete, replaced by ...
        (any_live_thread_of_inferior): ... this new function.  All callers
        adjusted.
        (switch_to_thread, switch_to_no_thread): Declare.
        (is_executing): Delete.
        (enable_thread_stack_temporaries): Update comment.
        <enable_thread_stack_temporaries>: Take a thread_info pointer
        instead of a ptid_t.  Incref the thread.
        <~enable_thread_stack_temporaries>: Decref the thread.
        <m_ptid>: Delete
        <m_thr>: New.
        (thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
        (get_last_thread_stack_temporary)
        (value_in_thread_stack_temporaries, can_access_registers_thread):
        Take a thread_info pointer instead of a ptid_t.  All callers
        adjusted.
        * infcall.c (get_call_return_value): Use inferior_thread.
        (run_inferior_call): Work with thread pointers instead of ptid_t.
        (call_function_by_hand_dummy): Work with thread pointers instead
        of ptid_t.  Use thread_info_ref.
        * infcmd.c (proceed_thread_callback): Access thread's state
        directly.
        (ensure_valid_thread, ensure_not_running): Use inferior_thread,
        access thread's state directly.
        (continue_command): Use inferior_thread.
        (info_program_command): Use find_thread_ptid and access thread
        state directly.
        (proceed_after_attach_callback): Use thread state directly.
        (notice_new_inferior): Take a thread_info pointer instead of a
        ptid_t.  All callers adjusted.
        (exit_inferior): Take an inferior pointer instead of a pid.  All
        callers adjusted.
        (exit_inferior_silent): New.
        (detach_inferior): Delete.
        (valid_gdb_inferior_id, pid_to_gdb_inferior_id)
        (gdb_inferior_id_to_pid, in_inferior_list): Delete.
        (detach_inferior_command, kill_inferior_command): Use
        find_inferior_id instead of valid_gdb_inferior_id and
        gdb_inferior_id_to_pid.
        (inferior_command): Use inferior and thread pointers.
        * inferior.h (struct thread_info): Forward declare.
        (notice_new_inferior): Take a thread_info pointer instead of a
        ptid_t.  All callers adjusted.
        (detach_inferior): Delete declaration.
        (exit_inferior, exit_inferior_silent): Take an inferior pointer
        instead of a pid.  All callers adjusted.
        (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
        (valid_gdb_inferior_id): Delete.
        * infrun.c (follow_fork_inferior, proceed_after_vfork_done)
        (handle_vfork_child_exec_or_exit, follow_exec): Adjust.
        (struct displaced_step_inferior_state) <pid>: Delete, replaced by
        ...
        <inf>: ... this new field.
        <step_ptid>: Delete, replaced by ...
        <step_thread>: ... this new field.
        (get_displaced_stepping_state): Take an inferior pointer instead
        of a pid.  All callers adjusted.
        (displaced_step_in_progress_any_inferior): Adjust.
        (displaced_step_in_progress_thread): Take a thread pointer instead
        of a ptid_t.  All callers adjusted.
        (displaced_step_in_progress, add_displaced_stepping_state): Take
        an inferior pointer instead of a pid.  All callers adjusted.
        (get_displaced_step_closure_by_addr): Adjust.
        (remove_displaced_stepping_state): Take an inferior pointer
        instead of a pid.  All callers adjusted.
        (displaced_step_prepare_throw, displaced_step_prepare)
        (displaced_step_fixup): Take a thread pointer instead of a ptid_t.
        All callers adjusted.
        (start_step_over): Adjust.
        (infrun_thread_ptid_changed): Remove bit updating ptids in the
        displaced step queue.
        (do_target_resume): Adjust.
        (fetch_inferior_event): Use inferior_thread.
        (context_switch, get_inferior_stop_soon): Take an
        execution_control_state pointer instead of a ptid_t.  All callers
        adjusted.
        (switch_to_thread_cleanup): Delete.
        (stop_all_threads): Use scoped_restore_current_thread.
        * inline-frame.c: Include "gdbthread.h".
        (inline_state) <inline_state>: Take a thread pointer instead of a
        ptid_t.  All callers adjusted.
        <ptid>: Delete, replaced by ...
        <thread>: ... this new field.
        (find_inline_frame_state): Take a thread pointer instead of a
        ptid_t.  All callers adjusted.
        (skip_inline_frames, step_into_inline_frame)
        (inline_skipped_frames, inline_skipped_symbol): Take a thread
        pointer instead of a ptid_t.  All callers adjusted.
        * inline-frame.h (skip_inline_frames, step_into_inline_frame)
        (inline_skipped_frames, inline_skipped_symbol): Likewise.
        * linux-fork.c (delete_checkpoint_command): Adjust to use thread
        pointers directly.
        * linux-nat.c (get_detach_signal): Likewise.
        * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
        (thread_db_notice_clone): Adjust.
        (thread_db_find_new_threads_silently)
        (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
        a thread pointer instead of a ptid_t.  All callers adjusted.
        * mi/mi-cmd-var.c: Include "inferior.h".
        (mi_cmd_var_update_iter): Update to use thread pointers.
        * mi/mi-interp.c (mi_new_thread): Update to use the thread's
        inferior directly.
        (mi_output_running_pid, mi_inferior_count): Delete, bits factored
        out to ...
        (mi_output_running): ... this new function.
        (mi_on_resume_1): Adjust to use it.
        (mi_user_selected_context_changed): Adjust to use inferior_thread.
        * mi/mi-main.c (proceed_thread): Adjust to use thread pointers
        directly.
        (interrupt_thread_callback): : Adjust to use thread and inferior
        pointers.
        * proc-service.c: Include "gdbthread.h".
        (ps_pglobal_lookup): Adjust to use the thread's inferior directly.
        * progspace-and-thread.c: Include "inferior.h".
        * progspace.c: Include "inferior.h".
        * python/py-exitedevent.c (create_exited_event_object): Adjust to
        hold a reference to an inferior_object.
        * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
        inferior_thread.
        * python/py-inferior.c (struct inferior_object): Give the type a
        tag name instead of a typedef.
        (python_on_normal_stop): No need to check if the current thread is
        listed.
        (inferior_to_inferior_object): Change return type to
        inferior_object.  All callers adjusted.
        (find_thread_object): Delete, bits factored out to ...
        (thread_to_thread_object): ... this new function.
        * python/py-infthread.c (create_thread_object): Use
        inferior_to_inferior_object.
        (thpy_is_stopped): Use thread pointer directly.
        (gdbpy_selected_thread): Use inferior_thread.
        * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
        field, replaced with ...
        <thread>: ... this new field.  All users adjusted.
        (btpy_insn_or_gap_new): Drop const.
        (btpy_list_new): Take a thread pointer instead of a ptid_t.  All
        callers adjusted.
        * python/py-record.c: Include "gdbthread.h".
        (recpy_insn_new, recpy_func_new): Take a thread pointer instead of
        a ptid_t.  All callers adjusted.
        (gdbpy_current_recording): Use inferior_thread.
        * python/py-record.h (recpy_record_object) <ptid>: Delete
        field, replaced with ...
        <thread>: ... this new field.  All users adjusted.
        (recpy_element_object) <ptid>: Delete
        field, replaced with ...
        <thread>: ... this new field.  All users adjusted.
        (recpy_insn_new, recpy_func_new): Take a thread pointer instead of
        a ptid_t.  All callers adjusted.
        * python/py-threadevent.c: Include "gdbthread.h".
        (get_event_thread): Use thread_to_thread_object.
        * python/python-internal.h (struct inferior_object): Forward
        declare.
        (find_thread_object, find_inferior_object): Delete declarations.
        (thread_to_thread_object, inferior_to_inferior_object): New
        declarations.
        * record-btrace.c: Include "inferior.h".
        (require_btrace_thread): Use inferior_thread.
        (record_btrace_frame_sniffer)
        (record_btrace_tailcall_frame_sniffer): Use inferior_thread.
        (get_thread_current_frame): Use scoped_restore_current_thread and
        switch_to_thread.
        (get_thread_current_frame): Use thread pointer directly.
        (record_btrace_replay_at_breakpoint): Use thread's inferior
        pointer directly.
        * record-full.c: Include "inferior.h".
        * regcache.c: Include "gdbthread.h".
        (get_thread_arch_regcache): Use the inferior's address space
        directly.
        (get_thread_regcache, registers_changed_thread): New.
        * regcache.h (get_thread_regcache(thread_info *thread)): New
        overload.
        (registers_changed_thread): New.
        (remote_target) <remote_detach_1>: Swap order of parameters.
        (remote_add_thread): <remote_add_thread>: Return the new thread.
        (get_remote_thread_info(ptid_t)): New overload.
        (remote_target::remote_notice_new_inferior): Use thread pointers
        directly.
        (remote_target::process_initial_stop_replies): Use
        thread_info::set_running.
        (remote_target::remote_detach_1, remote_target::detach)
        (extended_remote_target::detach): Adjust.
        * stack.c (frame_show_address): Use inferior_thread.
        * target-debug.h (target_debug_print_thread_info_pp): New.
        * target-delegates.c: Regenerate.
        * target.c (default_thread_address_space): Delete.
        (memory_xfer_partial_1): Use current_inferior.
        (target_detach): Use current_inferior.
        (target_thread_address_space): Delete.
        (generic_mourn_inferior): Use current_inferior.
        * target.h (struct target_ops) <thread_address_space>: Delete.
        (target_thread_address_space): Delete.
        * thread.c (init_thread_list): Use ALL_THREADS_SAFE.  Use thread
        pointers directly.
        (delete_thread_1, delete_thread, delete_thread_silent): Take a
        thread pointer instead of a ptid_t.  Adjust all callers.
        (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
        (first_thread_of_process): Delete, replaced by ...
        (first_thread_of_inferior): ... this new function.  All callers
        adjusted.
        (any_thread_of_process): Rename to ...
        (any_thread_of_inferior): ... this, and take an inferior pointer.
        (any_live_thread_of_process): Rename to ...
        (any_live_thread_of_inferior): ... this, and take an inferior
        pointer.
        (thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
        (value_in_thread_stack_temporaries)
        (get_last_thread_stack_temporary): Take a thread pointer instead
        of a ptid_t.  Adjust all callers.
        (thread_info::set_running): New.
        (validate_registers_access): Use inferior_thread.
        (can_access_registers_ptid): Rename to ...
        (can_access_registers_thread): ... this, and take a thread
        pointer.
        (print_thread_info_1): Adjust to compare thread pointers instead
        of ptids.
        (switch_to_no_thread, switch_to_thread): Make extern.
        (scoped_restore_current_thread::~scoped_restore_current_thread):
        Use m_thread pointer directly.
        (scoped_restore_current_thread::scoped_restore_current_thread):
        Use inferior_thread.
        (thread_command): Use thread pointer directly.
        (thread_num_make_value_helper): Use inferior_thread.
        * top.c (execute_command): Use inferior_thread.
        * tui/tui-interp.c: Include "inferior.h".
        * varobj.c (varobj_create): Use inferior_thread.
        (value_of_root_1): Use find_thread_global_id instead of
        global_thread_id_to_ptid.

2018-06-21  Alan Hayward  <alan.hayward@arm.com>

        * regcache.c (readable_regcache::read_part): Avoid memcpy when
        possible.
        (regcache::write_part): Likewise.
        (readable_regcache::cooked_read_part): Update comment.
        (readable_regcache::cooked_write_part): Likewise.
        * regcache.h: (readable_regcache::read_part): Likewise.
        (regcache::write_part): Likewise.

2018-06-21  Richard Bunt  <richard.bunt@arm.com>
            Dirk Schubert  <dirk.schubert@arm.com>

        * aarch64-linux-nat.c (post_attach): New.
        (aarch64_linux_nat_target::post_attach): Override post_attach to
        record the number of hardware debug registers.

2018-06-20  Tom Tromey  <tom@tromey.com>

        * python/py-param.c (add_setshow_generic): Make parameters const.
        (parmpy_init): Update.

2018-06-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * regcache.h (regcache_cooked_read_ftype): Rename to...
        (register_read_ftype): ...this, change type to function_view.
        (class reg_buffer) <save>: Remove src parameter.
        (readonly_detached_regcache) <readonly_detached_regcache>: Make
        parameter non-const in first overload.  Remove src parameter in
        second overload.
        * regcache.c (do_cooked_read): Remove.
        (readonly_detached_regcache::readonly_detached_regcache): Make
        parameter non-const, adjust call to other constructor.
        (reg_buffer::save): Remove src parameter.
        * frame.c (do_frame_register_read): Remove.
        (frame_save_as_regcache): Use lambda function.
        * ppc-linux-tdep.c (ppu2spu_unwind_register): Change type of src
        parameter to ppu2spu_data *.
        (ppu2spu_sniffer): Use lambda function.

2018-06-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * record-full.c (record_full_target::insert_breakpoint): Remove
        "struct" keyword, add const.

2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

        * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
        PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
        * configure.ac: Remove AC_PREREQ, add missing quoting.
        * gnulib/configure.ac: Modernize usage of
        AC_INIT/AM_INIT_AUTOMAKE.  Remove AC_PREREQ.
        * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
        (AUTOMAKE_VERSION): Bump to 1.15.1.
        * configure: Re-generate.
        * config.in: Re-generate.
        * aclocal.m4: Re-generate.
        * gnulib/aclocal.m4: Re-generate.
        * gnulib/config.in: Re-generate.
        * gnulib/configure: Re-generate.
        * gnulib/import/Makefile.in: Re-generate.

2018-06-19  Pedro Alves  <palves@redhat.com>

        * minsyms.c (msym_prefer_to_msym_type): New, factored out from ...
        (lookup_minimal_symbol_by_pc_section): ... here with
        gdb_assert_not_reached added.

2018-06-19  Pedro Alves  <palves@redhat.com>

        * inline-frame.c (stopped_by_user_bp_inline_frame): Replace PC
        parameter with a block parameter.  Compare location's block symbol
        with the frame's block instead of addresses.
        (skip_inline_frames): Pass the current block instead of the
        frame's address.  Break out as soon as we determine the frame
        should not be skipped.

2018-06-18  Tom Tromey  <tom@tromey.com>

        * solib-aix.c (solib_aix_get_section_offsets): Return
        unique_xmalloc_ptr.
        (solib_aix_solib_create_inferior_hook): Update.

2018-06-18  Tom Tromey  <tom@tromey.com>

        * solib-darwin.c (darwin_current_sos): Use unique_xmalloc_ptr.

2018-06-18  Tom Tromey  <tom@tromey.com>

        * solib-frv.c (frv_relocate_main_executable): Use
        unique_xmalloc_ptr.
        * solib-dsbt.c (dsbt_relocate_main_executable): Use
        unique_xmalloc_ptr.

2018-06-18  Tom Tromey  <tom@tromey.com>

        * objfiles.h (inhibit_section_map_updates): Update.
        (resume_section_map_updates, resume_section_map_updates_cleanup):
        Remove.
        * solib-svr4.c (svr4_handle_solib_event): Update.
        * objfiles.c (inhibit_section_map_updates): Return
        scoped_restore_tmpl<int>.
        (resume_section_map_updates, resume_section_map_updates_cleanup):
        Remove.

2018-06-18  Tom Tromey  <tom@tromey.com>

        * valprint.h (read_string): Update.
        * valprint.c (read_string): Change type of "buffer".
        (val_print_string): Update.
        * python/py-value.c (valpy_string): Update.
        * language.h (struct language_defn) <la_get_string>: Change
        type of "buffer".
        (default_get_string, c_get_string): Update.
        * language.c (default_get_string): Change type of "buffer".
        * guile/scm-value.c (gdbscm_value_to_string): Update.
        * c-lang.c (c_get_string): Change type of "buffer".

2018-06-18  Tom Tromey  <tom@tromey.com>

        * ser-mingw.c (struct pipe_state_destroyer): New.
        (pipe_state_up): New typedef.
        (cleanup_pipe_state): Remove.
        (pipe_windows_open): Use pipe_state_up.  Don't release argv.

2018-06-18  Tom Tromey  <tom@tromey.com>

        * rust-lang.h (rust_yyerror): Don't declare.
        * rust-lang.c (rust_language_defn): Update.
        * rust-exp.y (yyerror): Now static.
        * parse.c (parse_exp_in_context_1): Update.
        * p-lang.h (p_yyerror): Don't declare.
        * p-lang.c (p_language_defn): Update.
        * p-exp.y (yyerror): Now static.
        * opencl-lang.c (opencl_language_defn): Update.
        * objc-lang.c (objc_language_defn): Update.
        * m2-lang.h (m2_yyerror): Don't declare.
        * m2-lang.c (m2_language_defn): Update.
        * m2-exp.y (yyerror): Now static.
        * language.h (struct language_defn) <la_error>: Remove.
        * language.c (unk_lang_error): Remove.
        (unknown_language_defn, auto_language_defn): Remove.
        * go-lang.h (go_yyerror): Don't declare.
        * go-lang.c (go_language_defn): Update.
        * go-exp.y (yyerror): Now static.
        * f-lang.h (f_yyerror): Don't declare.
        * f-lang.c (f_language_defn): Update.
        * f-exp.y (yyerror): Now static.
        * d-lang.h (d_yyerror): Don't declare.
        * d-lang.c (d_language_defn): Update.
        * d-exp.y (yyerror): Now static.
        * c-lang.h (c_yyerror): Don't declare.
        * c-lang.c (c_language_defn, cplus_language_defn)
        (asm_language_defn, minimal_language_defn): Update.
        * c-exp.y (yyerror): Now static.
        * ada-lang.h (ada_yyerror): Don't declare.
        * ada-lang.c (ada_language_defn): Update.
        * ada-exp.y (yyerror): Now static.

2018-06-18  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-nat.c (fetch_sveregs_from_thread): New function.
        (store_sveregs_to_thread): Likewise.
        (aarch64_linux_fetch_inferior_registers): Check for SVE.
        (aarch64_linux_store_inferior_registers): Likewise.
        * nat/aarch64-sve-linux-ptrace.c (aarch64_sve_get_sveregs): New
        function.
        (aarch64_sve_regs_copy_to_regcache): Likewise.
        (aarch64_sve_regs_copy_from_regcache): Likewise.
        * nat/aarch64-sve-linux-ptrace.h (aarch64_sve_get_sveregs): New
        declaration.
        (aarch64_sve_regs_copy_to_regcache): Likewise.
        (aarch64_sve_regs_copy_from_regcache): Likewise.
        (sve_context): Structure from Linux headers.
        (SVE_SIG_ZREGS_SIZE): Define from Linux headers.
        (SVE_SIG_ZREG_SIZE): Likewise.
        (SVE_SIG_PREG_SIZE): Likewise.
        (SVE_SIG_FFR_SIZE): Likewise.
        (SVE_SIG_REGS_OFFSET): Likewise.
        (SVE_SIG_ZREGS_OFFSET): Likewise.
        (SVE_SIG_ZREG_OFFSET): Likewise.
        (SVE_SIG_ZREGS_SIZE): Likewise.
        (SVE_SIG_PREGS_OFFSET): Likewise.
        (SVE_SIG_PREG_OFFSET): Likewise.
        (SVE_SIG_PREGS_SIZE): Likewise.
        (SVE_SIG_FFR_OFFSET): Likewise.
        (SVE_SIG_REGS_SIZE): Likewise.
        (SVE_SIG_CONTEXT_SIZE): Likewise.
        (SVE_PT_REGS_MASK): Likewise.
        (SVE_PT_REGS_FPSIMD): Likewise.
        (SVE_PT_REGS_SVE): Likewise.
        (SVE_PT_VL_INHERIT): Likewise.
        (SVE_PT_VL_ONEXEC): Likewise.
        (SVE_PT_REGS_OFFSET): Likewise.
        (SVE_PT_FPSIMD_OFFSET): Likewise.
        (SVE_PT_FPSIMD_SIZE): Likewise.
        (SVE_PT_SVE_ZREG_SIZE): Likewise.
        (SVE_PT_SVE_PREG_SIZE): Likewise.
        (SVE_PT_SVE_FFR_SIZE): Likewise.
        (SVE_PT_SVE_FPSR_SIZE): Likewise.
        (SVE_PT_SVE_FPCR_SIZE): Likewise.
        (__SVE_SIG_TO_PT): Likewise.
        (SVE_PT_SVE_OFFSET): Likewise.
        (SVE_PT_SVE_ZREGS_OFFSET): Likewise.
        (SVE_PT_SVE_ZREG_OFFSET): Likewise.
        (SVE_PT_SVE_ZREGS_SIZE): Likewise.
        (SVE_PT_SVE_PREGS_OFFSET): Likewise.
        (SVE_PT_SVE_PREG_OFFSET): Likewise.
        (SVE_PT_SVE_PREGS_SIZE): Likewise.
        (SVE_PT_SVE_FFR_OFFSET): Likewise.
        (SVE_PT_SVE_FPSR_OFFSET): Likewise.
        (SVE_PT_SVE_FPCR_OFFSET): Likewise.
        (SVE_PT_SVE_SIZE): Likewise.
        (SVE_PT_SIZE): Likewise.
        (HAS_SVE_STATE): New define.

2018-06-18  Alan Hayward  <alan.hayward@arm.com>

        * nat/aarch64-sve-linux-sigcontext.h: New file.
        * nat/aarch64-sve-linux-ptrace.h (SVE_VQ_BYTES): Move to
        new files.
        (SVE_VQ_MIN): Likewise.
        (SVE_VQ_MAX): Likewise.
        (SVE_VL_MIN): Likewise.
        (SVE_VL_MAX): Likewise.
        (SVE_NUM_ZREGS): Likewise.
        (SVE_NUM_PREGS): Likewise.
        (sve_vl_valid): Likewise.
        (struct user_sve_header): Likewise.

2018-06-16  Andrew Burgess  <andrew.burgess@embecosm.com>
            Richard Bunt <Richard.Bunt@arm.com>

        * linux-nat.c (stop_wait_callback): Don't discard SIGSTOP if it
        was requested by GDB.

2018-06-15  Tom de Vries  <tdevries@suse.de>

        * MAINTAINERS (Write After Approval): Add Tom de Vries.

2018-06-14  Simon Marchi  <simon.marchi@polymtl.ca>

        * gnulib/update-gnulib.sh: Print expected versions of
        autoconf/aclocal.

2018-06-14  Simon Marchi  <simon.marchi@ericsson.com>

        * arch-utils.c (default_type_align): Use type_length_units.
        * gdbtypes.c (type_align): Use type_length_units.

2018-06-14  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * cli/cli-script.c (_initialize_cli_script): Fix online documentation
        of 'define' command.

2018-06-14  Tom de Vries  <tdevries@suse.de>

        PR cli/22573
        * infcmd.c (print_return_value_1): Use get_user_print_options instead of
        get_no_prettyformat_print_options.

2018-06-13  Simon Marchi  <simon.marchi@ericsson.com>

        * sparc-nat.h: Include target.h.
        * sparc64-linux-nat.c (class sparc64_linux_nat_target)
        <fetch_registers>: Remove this argument in function call.
        <store_registers>: Remove this argument in function call, remove
        extra semicolon.
        <low_forget_process>: Call sparc64_forget_process instead of
        sparc_forget_process.

2018-06-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * procfs.c (_initialize_procfs): Use add_inf_child_target.
        (procfs_target::make_corefile_notes): Adjust to new
        target_read_alloc return type.

2018-06-12  Andrew Burgess  <andrew.burgess@embecosm.com>
            Stephen Roberts  <stephen.roberts@arm.com>

        PR gdb/22882
        * infrun.c (fetch_inferior_event): If GDB is not proceeding then
        run INF_EXEC_COMPLETE handler, even when not calling normal_stop.
        Move should_notify_stop local into more inner scope.

2018-06-12  Andrew Burgess  <andrew.burgess@embecosm.com>
            Stephen Roberts  <stephen.roberts@arm.com>

        PR gdb/22882
        * infrun.c (resume_1): Add call to mark_async_event_handler.

2018-06-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * infrun.c (do_target_wait): Change old version of $pc printed.

2018-06-11  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (read_index_from_section): Rename to...
        (read_gdb_index_from_section): ... this, update all callers.
        (dwarf2_read_index): Rename to...
        (dwarf2_read_gdb_index): ... this, update all callers.

2018-06-11  John David Anglin  <danglin@gcc.gnu.org>

        * hppa-linux-nat.c
        (hppa_linux_nat_target::fetch_inferior_registers): Rename to
        hppa_linux_nat_target::fetch_registers.

2018-06-11  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (aarch64_dwarf_reg_to_regnum): Add mappings.
        * aarch64-tdep.h (AARCH64_DWARF_SVE_VG): Add define.
        (AARCH64_DWARF_SVE_FFR): Likewise.
        (AARCH64_DWARF_SVE_P0): Likewise.
        (AARCH64_DWARF_SVE_Z0): Likewise.

2018-06-11  Alan Hayward  <alan.hayward@arm.com>

        * common/common-regcache.h (raw_compare): New function.
        * regcache.c (regcache::raw_compare): Likewise.
        * regcache.h (regcache::raw_compare): New declaration.

2018-06-11  Alan Hayward  <alan.hayward@arm.com>

        * common/common-regcache.h (reg_buffer_common): New structure.
        * regcache.c (reg_buffer::invalidate): Move from detached_regcache.
        (reg_buffer::raw_supply): Likewise.
        (reg_buffer::raw_supply_integer): Likewise.
        (reg_buffer::raw_supply_zeroed): Likewise.
        (reg_buffer::raw_collect): Likewise.
        (reg_buffer::raw_collect_integer): Likewise.
        * regcache.h (reg_buffer::invalidate): Move from detached_regcache.
        (reg_buffer::raw_supply): Likewise.
        (reg_buffer::raw_supply_integer): Likewise.
        (reg_buffer::raw_supply_zeroed): Likewise.
        (reg_buffer::raw_collect): Likewise.
        (reg_buffer::raw_collect_integer): Likewise.

2018-06-10  Tom Tromey  <tom@tromey.com>

        * remote.c (stop_reply_p): Remove typedef.  Don't declare queue.
        (class remote_state) <stop_reply_queue>: Now std::vector.
        (remote_state::~remote_state)
        (remote_target::stop_reply_queue_length): Update.
        (struct queue_iter_param, remove_child_of_pending_fork)
        (struct check_pending_event_prevents_wildcard_vcont_callback_data)
        (check_pending_event_prevents_wildcard_vcont_callback)
        (remove_stop_reply_for_inferior)
        (remove_stop_reply_of_remote_state)
        (remote_notif_remove_once_on_match)
        (stop_reply_match_ptid_and_ws)
        (remote_kill_child_of_pending_fork): Remove.
        (remote_target::remove_new_fork_children)
        (remote_target::check_pending_events_prevent_wildcard_vcont)
        (remote_target::discard_pending_stop_replies)
        (remote_target::discard_pending_stop_replies_in_queue)
        (remote_target::remote_notif_remove_queued_reply)
        (remote_target::queued_stop_reply)
        (remote_target::push_stop_reply, remote_target::peek_stop_reply)
        (remote_target::wait, remote_target::kill_new_fork_children)
        (remote_target::async): Update.

2018-06-10  Tom Tromey  <tom@tromey.com>

        * record-full.c (record_full_arch_list_cleanups): Remove.
        (record_full_message): Use try/catch.
        (record_full_wait_cleanups): Remove.
        (record_full_wait_1): Use try/catch.
        (record_full_restore): Likewise.

2018-06-10  Tom Tromey  <tom@tromey.com>

        * record-full.c (record_full_breakpoint_p): Remove typedef.  Don't
        declare VEC.  Add constructor.
        <in_target_beneath>: Now bool.
        (record_full_breakpoints): Now a std::vector, static.
        (record_full_sync_record_breakpoints)
        (record_full_init_record_breakpoints)
        (record_full_target::insert_breakpoint)
        (record_full_target::remove_breakpoint): Update.  Don't use XNEW.

2018-06-10  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.c (process_cu_includes): Remove struct keyword.
        * serial.c (serial_interface_lookup): Remove struct keyword.

2018-06-10  Tom Tromey  <tom@tromey.com>

        * procfs.c (procfs_target::xfer_partial): Use "beneath" as a
        method.
        * nto-procfs.c (nto_procfs_target::xfer_partial): Use "beneath" as
        a method.
        * go32-nat.c (go32_nat_target::xfer_partial): Use "beneath" as a
        method.
        * arm-linux-nat.c (arm_linux_nat_target::read_description): Use
        "beneath" as a method.
        * arm-fbsd-nat.c (arm_fbsd_nat_target::read_description):
        Use "beneath" as a method.

2018-06-10  Tom Tromey  <tom@tromey.com>

        * tracefile.c (struct trace_file_writer_deleter): New.
        <operator()>: Rename from trace_file_writer_xfree.
        (trace_file_writer_up): New typedef.
        (tsave_command, trace_save_tfile, trace_save_ctf): Update.

2018-06-09  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (reg_buffer) <~reg_buffer>: Use default destructor.
        <m_registers, m_register_status>: Change type to
        std::unique_ptr.
        * regcache.c (reg_buffer::reg_buffer): Use new instead of
        XCNEWVEC.

2018-06-09  Simon Marchi  <simon.marchi@ericsson.com>

        * common/common-regcache.h (enum register_status): Add
        underlying type "signed char".
        * regcache.h (reg_buffer) <m_register_status>: Change type to
        register_status *.
        * regcache.c (reg_buffer::reg_buffer): Alocate arrays of
        register_status instead of signed char.
        (reg_buffer::save): Use REG_UNKNOWN instead of 0.
        (reg_buffer::get_register_status): Remove cast.
        (readable_regcache::raw_read): Remove cast.
        (readable_regcache::cooked_read): Remove cast.

2018-06-09  Tom Tromey  <tom@tromey.com>

        * source.c (reverse_search_command, forward_search_command): Use
        scoped_fd.

2018-06-09  Tom Tromey  <tom@tromey.com>

        * serial.c (serial_ops_p): Remove typedef.  Don't declare VEC.
        (serial_ops_list): Now static, std::vector.
        (serial_interface_lookup, serial_add_interface): Update.

2018-06-09  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (process_cu_includes): Update.
        (process_full_comp_unit): Update.
        * dwarf2read.h (struct dwarf2_per_objfile) <just_read_cus>: Now a
        std::vector.

2018-06-08  Paul Koning  <paul_koning@dell.com>

        PR gdb/23252

        * python/python.c (do_start_initialization):
        Avoid call to internal Python API.
        (init__gdb_module): New function.

2018-06-08  Gary Benson <gbenson@redhat.com>

        * linux-thread-db.c (valprint.h): New include.
        (struct check_thread_db_info): New structure.
        (check_thread_db_on_load, tdb_testinfo): New static globals.
        (check_thread_db, check_thread_db_callback): New functions.
        (try_thread_db_load_1): Run integrity checks if requested.
        (maintenance_check_libthread_db): New function.
        (_initialize_thread_db): Register "maint check libthread-db"
        and "maint set/show check-libthread-db".
        * NEWS: Mention the above new commands.

2018-06-08  Tom Tromey  <tom@tromey.com>

        * windows-nat.c (windows_nat_target::xfer_partial): "beneath" is
        now a method.

2018-06-08  Tom Tromey  <tom@tromey.com>

        * btrace.c (parse_xml_raw): Use gdb::unique_xmalloc_ptr.

2018-06-08  Tom Tromey  <tom@tromey.com>

        * common/btrace-common.h (struct btrace_data): Add constructor,
        destructor, move assignment operator.
        <empty, clear, fini>: New methods.
        <format>: Initialize.
        (btrace_data_init, btrace_data_fini, btrace_data_clear)
        (btrace_data_empty): Don't declare.
        * common/btrace-common.c (btrace_data_init): Remove.
        (btrace_data::fini): Rename from btrace_data_fini.
        (btrace_data::empty): Rename from btrace_data_empty.
        (btrace_data::clear): Rename from btrace_data_clear.  Return
        bool.
        * btrace.h (make_cleanup_btrace_data): Don't declare.
        * btrace.c (btrace_add_pc, btrace_stitch_trace, btrace_clear)
        (parse_xml_btrace): Update.
        (do_btrace_data_cleanup, make_cleanup_btrace_data): Remove.
        (maint_btrace_clear_packet_history_cmd): Update.

2018-06-07  Pedro Alves  <palves@redhat.com>

        * target.h (target_ops) <beneath>: Now a method.  All references
        updated.
        (class target_stack): New.
        * target.c (g_target_stack): New.
        (g_current_top_target): Delete.
        (current_top_target): Get the top target out of g_target_stack.
        (target_stack::push, target_stack::unpush): New.
        (push_target, unpush_target): Reimplement.
        (target_is_pushed): Reimplement in terms of g_target_stack.
        (target_ops::beneath, target_stack::find_beneath): New.

2018-06-07  Pedro Alves  <palves@redhat.com>

        * target.h (find_target_beneath): Delete declaration.
        * target.c (find_target_beneath): Delete definition.
        * aix-thread.c: All callers of find_target_beneath adjusted to
        call target_ops::beneath instead.
        * bsd-uthread.c: Likewise.
        * linux-thread-db.c: Likewise.
        * ravenscar-thread.c: Likewise.
        * sol-thread.c: Likewise.
        * spu-multiarch.c: Likewise.

2018-06-07  Pedro Alves  <palves@redhat.com>

        * target.h (target_ops) <beneath>: Now a method.  All references
        updated.
        (target_ops) <m_beneath>: New.
        * target.c (target_ops::beneath): New.
        * corelow.c: Adjust all references to target_ops::beneath.
        * linux-thread-db.c: Likewise.
        * make-target-delegates: Likewise.
        * record-btrace.c: Likewise.
        * record-full.c: Likewise.
        * remote.c: Likewise.
        * target.c: Likewise.
        * target-delegates.c: Regenerate.

2018-06-07  Pedro Alves  <palves@redhat.com>

        * target.h (target_stack): Delete.
        (current_top_target): Declare function.
        * target.c (target_stack): Delete.
        (g_current_top_target): New.
        (current_top_target): New function.
        * auxv.c: Use current_top_target instead of target_stack
        throughout.
        * avr-tdep.c: Likewise.
        * breakpoint.c: Likewise.
        * corefile.c: Likewise.
        * elfread.c: Likewise.
        * eval.c: Likewise.
        * exceptions.c: Likewise.
        * frame.c: Likewise.
        * gdbarch-selftests.c: Likewise.
        * gnu-v3-abi.c: Likewise.
        * ia64-tdep.c: Likewise.
        * ia64-vms-tdep.c: Likewise.
        * infcall.c: Likewise.
        * infcmd.c: Likewise.
        * infrun.c: Likewise.
        * linespec.c: Likewise.
        * linux-tdep.c: Likewise.
        * minsyms.c: Likewise.
        * ppc-linux-nat.c: Likewise.
        * ppc-linux-tdep.c: Likewise.
        * procfs.c: Likewise.
        * regcache.c: Likewise.
        * remote.c: Likewise.
        * rs6000-tdep.c: Likewise.
        * s390-linux-nat.c: Likewise.
        * s390-tdep.c: Likewise.
        * solib-aix.c: Likewise.
        * solib-darwin.c: Likewise.
        * solib-dsbt.c: Likewise.
        * solib-spu.c: Likewise.
        * solib-svr4.c: Likewise.
        * solib-target.c: Likewise.
        * sparc-tdep.c: Likewise.
        * sparc64-tdep.c: Likewise.
        * spu-tdep.c: Likewise.
        * symfile.c: Likewise.
        * symtab.c: Likewise.
        * target-descriptions.c: Likewise.
        * target-memory.c: Likewise.
        * target.c: Likewise.
        * target.h: Likewise.
        * tracefile-tfile.c: Likewise.
        * tracepoint.c: Likewise.
        * valops.c: Likewise.
        * valprint.c: Likewise.
        * value.c: Likewise.
        * windows-tdep.c: Likewise.
        * mi/mi-main.c: Likewise.

2018-06-07  Tom Tromey  <tom@tromey.com>

        * valprint.h (build_address_symbolic): Declare.
        * printcmd.c (print_address_symbolic): Update.
        (build_address_symbolic): Change "name" and "filename" to
        std::string.
        * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
        Update.
        * defs.h (build_address_symbolic): Remove declaration.

2018-06-07  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (AARCH64_SVE_V0_REGNUM): Add define.
        (aarch64_vnv_type): Add function.
        (aarch64_pseudo_register_name): Add V regs for SVE.
        (aarch64_pseudo_register_type): Likewise.
        (aarch64_pseudo_register_reggroup_p): Likewise.
        (aarch64_pseudo_read_value_2): Use V0 offset for SVE
        (aarch64_pseudo_read_value): Add V regs for SVE.
        (aarch64_pseudo_write_2): Use V0 offset for SVE
        (aarch64_pseudo_write): Add V regs for SVE.
        * aarch64-tdep.h (struct gdbarch_tdep): Add vnv_type.

2018-06-06  Sergio Durigan Junior  <sergiodj@redhat.com>

        * arch/aarch64.h (sve_vq_from_vl): Guard with #ifndef.
        (sve_vl_from_vq): Likewise.

2018-06-05  Tom Tromey  <tom@tromey.com>

        * cli/cli-cmds.c (show_version): Update.
        * top.c (print_gdb_version): Add "interactive" parameter.
        Update.
        * main.c (captured_main_1): Update.
        * top.h (print_gdb_version): Add "interactive" parameter and a
        comment.

2018-06-05  David Malcolm  <dmalcolm@redhat.com>

        * common/enum-flags.h: Add trailing semicolon to example in
        comment.

2018-06-05  Tom Tromey  <tom@tromey.com>

        PR cli/12326:
        * NEWS: Add entry about pager.
        * utils.c (pagination_disabled_for_command): New global.
        (prompt_for_continue): Allow "c" response to prompt.
        (reinitialize_more_filter): Clear
        pagination_disabled_for_command.
        (fputs_maybe_filtered): Check pagination_disabled_for_command.

2018-06-04  Tom Tromey  <tom@tromey.com>

        * ada-lang.h (ada_lookup_symbol_list): Update.
        * ada-lang.c (resolve_subexp): Update.
        (symbols_are_identical_enums): Change type of syms.  Remove nsyms
        parameter.
        (remove_extra_symbols, remove_irrelevant_renamings): Likewise.
        (ada_lookup_symbol_list_worker, ada_lookup_symbol_list): Change
        results parameter to std::vector.
        (ada_iterate_over_symbols, ada_lookup_symbol, get_var_value):
        Update.
        * ada-exp.y (block_lookup): Update.
        (select_possible_type_sym): Change type of syms.  Remove nsyms
        parameter.
        (write_var_or_type, write_name_assoc): Update.

2018-06-04  Joel Brobecker  <brobecker@adacore.com>

        * windows-nat.c (windows_nat_target::xfer_partial): Return
        TARGET_XFER_E_IO if we need to delegate to the target beneath
        but BENEATH is NULL.

2018-06-04  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (config.status): Add configure.nat as a
        dependency.

2018-06-04  Tom Tromey  <tom@tromey.com>

        * cp-name-parser.y (cpname_state): Add method declarations.
        (HANDLE_QUAL): Update.
        (cpname_state::d_grab, cpname_state::fill_comp)
        (cpname_state::make_operator, cpname_state::make_dtor)
        (cpname_state::make_builtin_type, cpname_state::make_name)
        (cpname_state::d_qualify, cpname_state::d_int_type)
        (cpname_state::d_unary, cpname_state::d_binary): Now methods.
        (%union): Move earlier.

2018-06-04  Alan Hayward  <alan.hayward@arm.com>

        * elfread.c (elf_symfile_segments): Use ELF_SECTION_IN_SEGMENT.

2018-06-04  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (aarch64_pseudo_read_value_1): New helper func.
        (aarch64_pseudo_write_1): Likewise.
        (aarch64_pseudo_read_value): Use helper.
        (aarch64_pseudo_write): Likewise.

2018-06-04  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_ops): Delete.
        (darwin_attach_pid): Use get_native_target.

2018-06-04  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (aarch64_get_tdesc_vq): Use uint64_t for VQ.
        * aarch64-tdep.h (struct gdbarch_tdep): Likewise.

2018-06-04  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-nat.c (aarch64_linux_read_description): Support SVE.
        * aarch64-tdep.c (aarch64_get_tdesc_vq): New function.
        (aarch64_gdbarch_init): Check for SVE.
        * aarch64-tdep.h (gdbarch_tdep::has_sve): New function.

2018-06-04  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (aarch64_read_description): Use uint64_t for VQ.
        * aarch64-tdep.h (aarch64_read_description): Likewise.
        * arch/aarch64.c (aarch64_create_target_description): Likewise.
        * arch/aarch64.h (aarch64_create_target_description): Likewise.
        * features/aarch64-sve.c (create_feature_aarch64_sve): Likewise.
        * nat/aarch64-sve-linux-ptrace.c(aarch64_sve_get_vq): Likewise.
        * nat/aarch64-sve-linux-ptrace.h (aarch64_sve_get_vq): Likewise.

2018-06-02  Simon Marchi  <simon.marchi@ericsson.com>

        * value.c (value_fetch_lazy_bitfield): New.
        (value_fetch_lazy_memory): New.
        (value_fetch_lazy_register): New.
        (value_fetch_lazy): Factor out to smaller functions.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * cp-name-parser.y (backslashable, represented): Now const.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * cp-name-parser.y: Include parser-defs.h.
        (parser_fprintf): Remove declaration.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * cp-name-parser.y: Use %pure-parser, %lex-param, and
        %parse-param.
        (lexptr, prev_lexptr, error_lexptr, global_errmsg, demangle_info)
        (global_result): Remove globals.
        (struct cpname_state): New.
        (yyparse): Don't declare.
        (yylex, yyerror): Move declarations after %union.
        (d_grab, fill_comp, make_operator, make_dtor, make_builtin_type)
        (make_name): Add state parameter.
        Update all callers.
        (d_qualify, d_int_type, d_unary, d_binary, parse_number) Add state
        parameter.
        (HANDLE_QUAL, HANDLE_SPECIAL, HANDLE_TOKEN2, HANDLE_TOKEN3):
        Update.
        (yylex): Add lvalp, state parameters.
        (yyerror): Add state parameter.
        (cp_demangled_name_to_comp): Update.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * cp-name-parser.y (parser_fprintf): Declare.
        (GDB_YY_REMAP_PREFIX): Define.
        Include yy-remap.h.  Don't redefine yy* identifiers.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * python/py-type.c (typy_legacy_template_argument): Update.
        * cp-support.h (cp_demangled_name_to_comp): Update.
        * cp-name-parser.y (cp_demangled_name_to_comp): Change errmsg
        parameter to be a "std::string *".
        (main): Update.

2018-06-01  H.J. Lu  <hongjiu.lu@intel.com>

        * ada-lex.l: Include "diagnostics.h" instead of
        "common/diagnostics.h".
        * unittests/environ-selftests.c: Likewise.
        * common/diagnostics.h: Moved to ../include.

2018-06-01  Joel Brobecker  <brobecker@adacore.com>

        * breakpoint.c (breakpoint_re_set): Temporarily force language_mode
        to language_mode_manual while calling breakpoint_re_set_one.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * valops.c (value_cast_structs, destructor_name_p): Update.
        * symtab.c (gdb_mangle_name): Update.
        * stabsread.c (define_symbol, read_cpp_abbrev, read_baseclasses):
        Update.
        * p-valprint.c (pascal_object_is_vtbl_ptr_type)
        (pascal_object_print_value_fields, pascal_object_print_value):
        Update.
        * p-typeprint.c (pascal_type_print_derivation_info): Update.
        * linespec.c (find_methods): Update.
        * gdbtypes.h (type_name_no_tag): Remove.
        (type_name_or_error): Rename from type_name_no_tag_or_error.
        * gdbtypes.c (type_name_no_tag): Remove.
        (type_name_or_error): Rename from type_name_no_tag_or_error.
        (lookup_struct_elt_type, check_typedef): Update.
        * expprint.c (print_subexp_standard): Update.
        * dwarf2read.c (dwarf2_add_field, load_partial_dies): Update.
        * d-namespace.c (d_lookup_nested_symbol): Update.
        * cp-valprint.c (cp_is_vtbl_ptr_type, cp_print_value_fields)
        (cp_print_class_member): Update.
        * cp-namespace.c (cp_lookup_nested_symbol): Update.
        * completer.c (add_struct_fields): Update.
        * c-typeprint.c (cp_type_print_derivation_info)
        (c_type_print_varspec_prefix, c_type_print_base_struct_union):
        Update.
        * ada-lang.c (parse_old_style_renaming, xget_renaming_scope)
        (ada_prefer_type, ada_is_exception_sym): Update.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * valops.c (enum_constant_from_type, value_namespace_elt)
        (value_maybe_namespace_elt): Update.
        * valarith.c (find_size_for_pointer_math): Update.
        * target-descriptions.c (make_gdb_type): Update.
        * symmisc.c (print_symbol): Update.
        * stabsread.c (define_symbol, read_type)
        (complain_about_struct_wipeout, add_undefined_type)
        (cleanup_undefined_types_1): Update.
        * rust-lang.c (rust_tuple_type_p, rust_slice_type_p)
        (rust_range_type_p, val_print_struct, rust_print_struct_def)
        (rust_internal_print_type, rust_composite_type)
        (rust_evaluate_funcall, rust_evaluate_subexp)
        (rust_inclusive_range_type_p): Update.
        * python/py-type.c (typy_get_tag): Update.
        * p-typeprint.c (pascal_type_print_base): Update.
        * mdebugread.c (parse_symbol, parse_type): Update.
        * m2-typeprint.c (m2_long_set, m2_record_fields, m2_enum):
        Update.
        * guile/scm-type.c (gdbscm_type_tag): Update.
        * go-lang.c (sixg_string_p): Update.
        * gnu-v3-abi.c (build_gdb_vtable_type, build_std_type_info_type):
        Update.
        * gdbtypes.h (struct main_type) <tag_name>: Remove.
        (TYPE_TAG_NAME): Remove.
        * gdbtypes.c (type_name_no_tag): Simplify.
        (check_typedef, check_types_equal, recursive_dump_type)
        (copy_type_recursive, arch_composite_type): Update.
        * f-typeprint.c (f_type_print_base): Update.  Print "Type" prefix
        in summary mode when needed.
        * eval.c (evaluate_funcall): Update.
        * dwarf2read.c (fixup_go_packaging, read_structure_type)
        (process_structure_scope, read_enumeration_type)
        (read_namespace_type, read_module_type, determine_prefix): Update.
        * cp-support.c (inspect_type): Update.
        * coffread.c (process_coff_symbol, decode_base_type): Update.
        * c-varobj.c (c_is_path_expr_parent): Update.
        * c-typeprint.c (c_type_print_base_struct_union): Update.
        (c_type_print_base_1): Update.  Print struct/class/union/enum in
        summary when using C language.
        * ax-gdb.c (gen_struct_ref, gen_namespace_elt)
        (gen_maybe_namespace_elt): Update.
        * ada-lang.c (ada_type_name): Simplify.
        (empty_record, ada_template_to_fixed_record_type_1)
        (template_to_static_fixed_type)
        (to_record_with_fixed_variant_part, ada_check_typedef): Update.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (dwarf2_compute_name): Pass CU's language to
        c_print_type.
        * c-typeprint.c (c_print_type_1): Add "language" parameter.
        (c_print_type): Update.
        (c_print_type): New overload.
        (c_type_print_varspec_prefix, c_type_print_args)
        (c_type_print_varspec_suffix, c_print_type_no_offsets)
        (c_type_print_base_struct_union, c_type_print_base_1)
        (cp_type_print_method_args): Add "language" parameter.
        (c_type_print_base): Update.
        * c-lang.h (c_print_type): Add new overload.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * typeprint.h (c_type_print_varspec_suffix): Don't declare.
        * c-typeprint.c (c_type_print_varspec_suffix): Now static.

2018-06-01  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-tdep.c (aarch64_sve_register_names): New const
        var.
        * arch/aarch64.h (enum aarch64_regnum): Add SVE entries.
        (AARCH64_SVE_Z_REGS_NUM): New define.
        (AARCH64_SVE_P_REGS_NUM): Likewise.
        (AARCH64_SVE_NUM_REGS): Likewise.

2018-05-31  Uros Bizjak  <ubizjak@gmail.com>

        * nat/linux-ptrace.h [__alpha__]
        (GDB_ARCH_IS_TRAP_BRKPT, GDB_ARCH_IS_TRAP_HWBKPT): Remove
        definitions.

2018-05-31  Maciej W. Rozycki  <macro@mips.com>

        * arch-utils.c (gdbarch_info_fill): Set `default_byte_order' to
        the endianness selected.
        * NEWS: Document `set endian auto' mode operation update.

2018-05-31  Alan Hayward  <alan.hayward@arm.com>

        * Makefile.in: Add new header.
        * gdb/arch/aarch64.h (sve_vg_from_vl): New macro.
        (sve_vl_from_vg): Likewise.
        (sve_vq_from_vl): Likewise.
        (sve_vl_from_vq): Likewise.
        (sve_vq_from_vg): Likewise.
        (sve_vg_from_vq): Likewise.
        * configure.nat: Add new c file.
        * nat/aarch64-sve-linux-ptrace.c: New file.
        * nat/aarch64-sve-linux-ptrace.h: New file.

2018-05-31  Alan Hayward  <alan.hayward@arm.com>

        * aarch64-linux-nat.c (aarch64_linux_read_description):
        Add parmeter zero.
        * aarch64-linux-tdep.c (aarch64_linux_core_read_description):
        Likewise.
        * aarch64-tdep.c (tdesc_aarch64_list): Add.
        (aarch64_read_description): Use VQ to index tdesc_aarch64_list.
        (aarch64_gdbarch_init): Add parmeter zero.
        * aarch64-tdep.h (aarch64_read_description): Add VQ parmeter.
        * arch/aarch64.c (aarch64_create_target_description): Check VQ.
        * arch/aarch64.h (aarch64_create_target_description): Add VQ.
        parmeter.
        * doc/gdb.texinfo: Describe SVE feature
        * features/aarch64-sve.c: New file.

2018-05-31  Omair Javaid  <omair.javaid@linaro.org>

        PR gdb/23210
        * gdbarch.sh (significant_addr_bit): Default to zero when
        not set by target architecture.
        * gdbarch.c: Re-generated.
        * utils.c (address_significant): Update.

2018-05-30  Joel Brobecker  <brobecker@adacore.com>

        * stack.c (func_command): Remove trailing newline in call to error.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_collect): Remove, update callers to
        use regcache::raw_collect.
        * regcache.c (regcache_raw_collect): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_supply): Remove, update callers to
        use detached_regcache::raw_supply.
        * regcache.c (regcache_raw_supply): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_cooked_write_part): Remove, update
        callers to use regcache::cooked_write_part.
        * regcache.c (regcache_cooked_write_part): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_cooked_read_part): Remove, update callers
        to use readable_regcache::cooked_read_part.
        * regcache.c (regcache_cooked_read_part): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_cooked_read_value): Remove, update
        callers to use readable_regcache::cooked_read_value.
        * regcache.c (regcache_cooked_read_value): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_cooked_write): Remove, update callers to
        use regcache::cooked_write.
        * regcache.c (regcache_cooked_write): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_invalidate): Remove, update callers to
        use detached_regcache::invalidate instead.
        * regcache.c (regcache_invalidate): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_write_part): Remove, update callers
        to use regcache::raw_write_part instead.
        * regcache.c (regcache_raw_write_part): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_read_part): Remove, update callers to
        use readable_regcache::raw_read_part instead.
        * regcache.c (regcache_raw_read_part): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_cooked_read): Remove, update callers to
        use readable_regcache::cooked_read instead.
        * regcache.c (regcache_cooked_read): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_write): Remove, update callers to use
        regcache::raw_write instead.
        * regcache.c (regcache_raw_write): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_read): Remove, update callers to use
        readable_regcache::raw_read instead.
        * regcache.c (regcache_raw_read): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_raw_update): Remove, update callers to
        use readable_regcache::raw_update instead.
        * regcache.c (regcache_raw_update): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_register_status): Remove, update callers
        to use reg_buffer::get_register_status directly instead.
        * regcache.c (regcache_register_status): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.h (regcache_get_ptid): Remove, update all callers to
        call regcache::ptid instead.
        * regcache.c (regcache_get_ptid): Remove.

2018-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (ALL_TARGET_OBS): Add or1k-tdep.o.

2018-05-30  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (exception_rethrow): Use
        ATTRIBUTE_NORETURN.

2018-05-29  Simon Marchi  <simon.marchi@polymtl.ca>

        * breakpoint.c (print_solib_event, check_status_catch_solib):
        Remove struct keyword in range-based for loops.
        * dbxread.c (find_corresponding_bincl_psymtab): Likewise.
        * dwarf2read.c (compute_delayed_physnames, rust_union_quirks);
        Likewise.
        * linespec.c (find_superclass_methods, search_minsyms_for_name):
        Likewise.
        * symfile.c (addr_info_make_relative): Likewise.
        * thread.c (value_in_thread_stack_temporaries): Likewise.

2018-06-12  Weimin Pan  <weimin.pan@oracle.com>

        PR gdb/16841
        * valops.c (value_struct_elt_for_reference): Call check_typedef on
        aggregate type to get its real type before accessing it.

2018-05-29  Weimin Pan  <weimin.pan@oracle.com>

        * minsyms.h (lookup_minimal_symbol_and_objfile): Remove declaration.
        * minsyms.c (lookup_minimal_symbol_and_objfile): Remove definition.
        * coff-pe-read.c (add_pe_forwarded_sym): Replace
        lookup_minimal_symbol_and_objfile with lookup_bound_minimal_symbol.
        * glibc-tdep.c (glibc_skip_solib_resolver): Likewise.
        * jit.c (jit_breakpoint_re_set_internal): Likewise.
        * printcmd.c (info_address_command): Likewise.

2018-05-29  Tom Tromey  <tom@tromey.com>

        * windows-nat.c (handle_exception): Update fall-through comment.

2018-05-29  Tom Tromey  <tom@tromey.com>

        * progspace.h (so_list_ptr): Remove typedef.  Don't declare VEC.
        (struct program_space) <added_solibs>: Now a std::vector.
        * breakpoint.c (print_solib_event): Update.
        (check_status_catch_solib): Update.
        * progspace.c (clear_program_space_solib_cache): Update.
        * solib.c (update_solib_list): Update.

2018-05-29  Tom Tromey  <tom@tromey.com>

        * python/py-type.c (typy_richcompare): Update.
        * guile/scm-type.c (tyscm_equal_p_type_smob): Update.
        * gdbtypes.h (types_deeply_equal): Return bool.
        (types_equal): Likewise.
        * gdbtypes.c (type_equality_entry_d): Remove typedef.  Don't
        declare VEC.
        (check_types_equal): Change worklist to std::vector.  Return
        bool.
        (struct type_equality_entry): Add constructor.
        (compare_maybe_null_strings): Return bool.
        (check_types_worklist): Return bool.  Change worklist to
        std::vector.
        (types_deeply_equal): Use std::vector.
        (types_equal): Return bool.
        (compare_maybe_null_strings): Simplify.

2018-05-29  Tom Tromey  <tom@tromey.com>

        * record-btrace.c (tp_t): Remove typedef.  Don't declare VEC.

2018-05-29  Tom Tromey  <tom@tromey.com>

        * objc-lang.h: Don't include cp-support.h.
        * common/gdb_vecs.h (const_char_ptr): Remove typedef.  Don't
        declare VEC.

2018-05-27  Tom Tromey  <tom@tromey.com>

        * Makefile.in (DEPFILES): Don't reference REMOTE_OBS.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * value.c (value::location): Initialize.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * dbxread.c (init_bincl_list): Remove.
        (bincl_list): Now a std::vector.
        (bincls_allocated, next_bincl): Remove.
        (free_bincl_list, do_free_bincl_list_cleanup)
        (make_cleanup_free_bincl_list): Remove.
        (dbx_read_symtab, elfstab_build_psymtabs): Use scoped_restore,
        unique_xmalloc_ptr.
        (find_corresponding_bincl_psymtab, read_dbx_symtab): Update.
        (struct header_file_location): Add constructor.
        (add_bincl_to_list): Remove.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * tui/tui.c (tui_enable): Update.
        * mi/mi-interp.c (mi_interp::init): Update.
        * interps.h (class interp) <name>: New method.
        <m_name>: Rename from name.
        (~scoped_restore_interp): Update.
        * interps.c (interp::interp): Update.
        (interp_add, interp_set, interp_lookup_existing)
        (current_interp_named_p): Update.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * interps.c (interp_name): Remove.
        * mi/mi-interp.c (mi_interp::init): Update.
        * interps.h (interp_name): Remove.
        (~scoped_restore_interp): Update.
        * tui/tui.c (tui_enable): Update.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * utils.c (fputs_maybe_filtered): Update.
        * linespec.c (decode_line_full): Update.
        * mi/mi-interp.c (mi_on_normal_stop_1, mi_tsv_modified)
        (mi_print_breakpoint_for_event, mi_solib_loaded)
        (mi_solib_unloaded, mi_command_param_changed, mi_memory_changed)
        (mi_user_selected_context_changed): Update.
        * mi/mi-main.c (mi_execute_command): Update.
        * cli/cli-script.c (execute_control_command): Update.
        * python/python.c (execute_gdb_command): Update.
        * solib.c (info_sharedlibrary_command): Update.
        * interps.c (interp_ui_out): Remove.
        * interps.h (interp_ui_out): Remove.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * tui/tui-interp.c (as_tui_interp): Use dynamic_cast.
        * mi/mi-interp.c (as_mi_interp): Use dynamic_cast.
        * cli/cli-interp.c (as_cli_interp): Use dynamic_cast.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * cli/cli-interp.c (safe_execute_command): Use scoped_restore.
        * interps.c (interp_exec): Use scoped_restore.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * remote.c (remote_target::remote_file_get): Use
        gdb::byte_vector.
        (remote_target::remote_file_put): Likewise.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * coff-pe-read.c (struct read_pe_section_data) <section_name>: Now
        a std::string.
        (get_pe_section_index, add_pe_exported_sym): Update.
        (read_pe_exported_syms): Use gdb::def_vector.

2018-05-25  Tom Tromey  <tom@tromey.com>

        * frame.c (remove_prev_frame): Remove.
        (get_prev_frame_if_no_cycle): Use TRY/CATCH.

2018-05-25  Maciej W. Rozycki  <macro@mips.com>

        * mips-linux-tdep.h (mips_supply_fpregset, mips_fill_fpregset):
        Remove prototypes.
        * mips-linux-nat.c (supply_fpregset): Always call
        `mips64_supply_fpregset' rather than `mips_supply_fpregset'.
        (fill_fpregset): Always call `mips64_fill_fpregset' rather than
        `mips_fill_fpregset'.
        * mips-linux-tdep.c (mips_supply_fpregset)
        (mips_supply_fpregset_wrapper, mips_fill_fpregset)
        (mips_fill_fpregset_wrapper): Remove functions.
        (mips64_supply_fpregset, mips64_fill_fpregset): Update comments.
        (mips_linux_fpregset): Remove variable.
        (mips_linux_iterate_over_regset_sections): Use
        `mips64_linux_fpregset' in place of `mips_linux_fpregset'.
        (mips_linux_o32_sigframe_init): Remove comment.

2018-05-25  Pedro Alves  <palves@redhat.com>

        * remote.c (struct vCont_action_support, MAXTHREADLISTRESULTS)
        (struct readahead_cache, struct packet_reg, struct
        remote_arch_state, class remote_state): Move higher up in the
        file.
        (remote_target::m_remote_state): Now an object instead of a pointer.
        (remote_target::get_remote_state): Adjust.

2018-05-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * stack.c (select_and_print_frame): Delete.
        (struct function_bounds): Move struct within function.
        (func_command): Most content moved into new function
        find_frame_for_function, use new function, print result, add
        function comment.
        (find_frame_for_function): New function, now returns a result.

2018-05-24  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * stack.c (iterate_over_block_arg_vars): Fix comment.
        (print_frame_arg_vars): Pass stream in cb_data, not gdb_stdout.

2018-05-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/23203
        * frame.c
        (scoped_restore_selected_frame::scoped_restore_selected_frame):
        Define.
        (scoped_restore_selected_frame::~scoped_restore_selected_frame):
        Define.
        * frame.h (class scoped_restore_selected_frame): New class.
        * stack.c (print_frame_local_vars): Remove catching and rethrowing
        of any exception, use scoped_restore_selected_frame to restore the
        frame instead.

2018-05-24  Pedro Alves  <palves@redhat.com>

        * darwin-nat.h (darwin_nat_target::create_inferior): Mark with
        override.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (struct complaints): Remove.
        (symfile_complaint_book): Remove.
        (series): New global.
        (complaint_internal): Update.
        (clear_complaints): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (counters): New global.
        (struct complain): Remove.
        (struct complaints) <root>: Remove.
        (complaint_sentinel): Remove.
        (symfile_complaint_book): Update.
        (find_complaint) Remove.
        (complaint_internal, clear_complaints): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (struct complain) <file, line>: Remove.
        (find_complaint): Remove file, line parameters.
        (complaint_internal): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (vcomplaint): Remove.
        (complaint_internal) Merge in contents of vcomplaint.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (struct complaints) <explanation>: Remove.
        (symfile_explanations): Remove.
        (symfile_complaint_book): Update.
        (vcomplaint): Update.
        (struct explanation): Remove.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (symfile_complaints): Remove.
        (complaint_internal): Remove "complaints" parameter.
        (clear_complaints, vcomplaint): Remove "c" parameter.
        (get_complaints): Remove.
        * dwarf2read.c (dwarf2_statement_list_fits_in_line_number_section_complaint)
        (dwarf2_debug_line_missing_file_complaint)
        (dwarf2_debug_line_missing_end_sequence_complaint)
        (dwarf2_complex_location_expr_complaint)
        (dwarf2_const_value_length_mismatch_complaint)
        (dwarf2_section_buffer_overflow_complaint)
        (dwarf2_macro_malformed_definition_complaint)
        (dwarf2_invalid_attrib_class_complaint)
        (create_addrmap_from_index, dw2_symtab_iter_next)
        (dw2_expand_marked_cus)
        (dw2_debug_names_iterator::find_vec_in_debug_names)
        (dw2_debug_names_iterator::next, dw2_debug_names_iterator::next)
        (create_debug_type_hash_table, init_cutu_and_read_dies)
        (partial_die_parent_scope, add_partial_enumeration)
        (skip_one_die, fixup_go_packaging, quirk_rust_enum, process_die)
        (dwarf2_compute_name, dwarf2_physname, read_namespace_alias)
        (read_import_statement, read_file_scope, create_dwo_cu_reader)
        (create_cus_hash_table, create_dwp_hash_table)
        (inherit_abstract_dies, read_func_scope, read_call_site_scope)
        (dwarf2_rnglists_process, dwarf2_ranges_process)
        (dwarf2_add_type_defn, dwarf2_attach_fields_to_type)
        (dwarf2_add_member_fn, get_alignment, maybe_set_alignment)
        (handle_struct_member_die, process_structure_scope)
        (read_array_type, read_common_block, read_module_type)
        (read_tag_pointer_type, read_typedef, read_base_type)
        (read_subrange_type, load_partial_dies, partial_die_info::read)
        (partial_die_info::read, partial_die_info::read)
        (partial_die_info::read, read_checked_initial_length_and_offset)
        (dwarf2_string_attr, read_formatted_entries)
        (dwarf_decode_line_header)
        (lnp_state_machine::check_line_address, dwarf_decode_lines_1)
        (new_symbol, dwarf2_const_value_attr, lookup_die_type)
        (read_type_die_1, determine_prefix, dwarf2_get_ref_die_offset)
        (dwarf2_get_attr_constant_value, dwarf2_fetch_constant_bytes)
        (get_signatured_type, get_DW_AT_signature_type)
        (decode_locdesc, file_file_name, consume_improper_spaces)
        (skip_form_bytes, skip_unknown_opcode, dwarf_parse_macro_header)
        (dwarf_decode_macro_bytes, dwarf_decode_macros)
        (dwarf2_symbol_mark_computed, set_die_type)
        (read_attribute_value): Update.
        * stap-probe.c (handle_stap_probe, get_stap_base_address):
        Update.
        * dbxread.c (unknown_symtype_complaint)
        (lbrac_mismatch_complaint, repeated_header_complaint)
        (set_namestring, function_outside_compilation_unit_complaint)
        (read_dbx_symtab, process_one_symbol): Update.
        * gdbtypes.c (stub_noname_complaint): Update.
        * windows-nat.c (handle_unload_dll): Update.
        * coffread.c (coff_symtab_read, enter_linenos, decode_type)
        (decode_base_type): Update.
        * xcoffread.c (bf_notfound_complaint, ef_complaint)
        (eb_complaint, record_include_begin, record_include_end)
        (enter_line_range, xcoff_next_symbol_text, read_xcoff_symtab)
        (process_xcoff_symbol, read_symbol)
        (function_outside_compilation_unit_complaint)
        (scan_xcoff_symtab): Update.
        * machoread.c (macho_symtab_read, macho_add_oso_symfile): Update.
        * buildsym.c (finish_block_internal, make_blockvector)
        (end_symtab_get_static_block, augment_type_symtab): Update.
        * dtrace-probe.c (dtrace_process_dof)
        (dtrace_static_probe_ops::get_probes): Update.
        * complaints.h (struct complaint): Don't declare.
        (symfile_complaints): Remove.
        (complaint_internal): Remove "complaints" parameter.
        (complaint): Likewise.
        (clear_complaints): Likewise.
        * symfile.c (syms_from_objfile_1, finish_new_objfile)
        (reread_symbols): Update.
        * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program)
        (dwarf2_frame_cache, decode_frame_entry): Update.
        * dwarf2loc.c (dwarf_reg_to_regnum): Update.
        * objc-lang.c (lookup_objc_class, lookup_child_selector)
        (info_selectors_command): Update.
        * macrotab.c (macro_include, check_for_redefinition)
        (macro_undef): Update.
        * objfiles.c (filter_overlapping_sections): Update.
        * stabsread.c (invalid_cpp_abbrev_complaint)
        (reg_value_complaint, stabs_general_complaint, dbx_lookup_type)
        (define_symbol, error_type, read_type, rs6000_builtin_type)
        (stabs_method_name_from_physname, read_member_functions)
        (read_cpp_abbrev, read_baseclasses, read_tilde_fields)
        (attach_fields_to_type, complain_about_struct_wipeout)
        (read_range_type, read_args, common_block_start)
        (common_block_end, cleanup_undefined_types_1, scan_file_globals):
        Update.
        * mdebugread.c (index_complaint, unknown_ext_complaint)
        (basic_type_complaint, bad_tag_guess_complaint)
        (bad_rfd_entry_complaint, unexpected_type_code_complaint)
        (reg_value_complaint, parse_symbol, parse_type, upgrade_type)
        (parse_procedure, parse_lines)
        (function_outside_compilation_unit_complaint)
        (parse_partial_symbols, psymtab_to_symtab_1, cross_ref)
        (bad_tag_guess_complaint, reg_value_complaint): Update.
        * cp-support.c (demangled_name_complaint): Update.
        * macroscope.c (sal_macro_scope): Update.
        * dwarf-index-write.c (class debug_names): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (clear_complaints): Remove "noisy" parameter.
        * complaints.h (clear_complaints): Update.
        * symfile.c (syms_from_objfile_1, finish_new_objfile)
        (reread_symbols): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (enum complaint_series): Remove FIRST_MESSAGE,
        SUBSEQUENT_MESSAGE.
        (vcomplaint, clear_complaints): Update.
        (symfile_explanations): Remove some messages.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * complaints.c (internal_complaint): Remove.
        * complaints.h (internal_complaint): Remove.

2018-05-22  Maciej W. Rozycki  <macro@mips.com>

        * i387-tdep.c (i387_collect_xsave): Make `i' unsigned.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote-fileio.c (remote_fileio_reply, remote_fileio_ioerror)
        (remote_fileio_badfd, remote_fileio_return_errno)
        (remote_fileio_return_success, remote_fileio_func_open)
        (remote_fileio_func_open, remote_fileio_func_close)
        (remote_fileio_func_read, remote_fileio_func_write)
        (remote_fileio_func_lseek, remote_fileio_func_rename)
        (remote_fileio_func_unlink, remote_fileio_func_stat)
        (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
        (remote_fileio_func_isatty, remote_fileio_func_system): Add
        remote_target parameter.
        (remote_fio_func_map) <func>: Add remote_target parameter.
        (do_remote_fileio_request, remote_fileio_request):
        * remote-fileio.h (remote_fileio_request):
        * remote-notif.c (remote_notif_ack, remote_notif_parse, ): Add
        remote_target parameter.
        (remote_notif_process, handle_notification): Adjust to pass down
        the remote.
        (remote_notif_state_allocate): Add remote_target parameter.  Save
        it.
        * remote-notif.h (struct remote_target): Forward declare.
        (struct notif_client) <parse, ack, can_get_pending_events>: Add
        remote_target parameter.
        (struct remote_notif_state) <remote>: New field.
        (remote_notif_ack, remote_notif_parse): Add remote_target
        parameter.
        (remote_notif_state_allocate, remote_notif_state_allocate): Add
        remote_target parameter.
        * remote.c (OPAQUETHREADBYTES, threadref, gdb_ext_thread_info)
        (threads_listing_context, rmt_thread_action, protocol_feature)
        (packet_reg, stop_reply, stop_reply_p, enum packet_support)
        (packet_result, struct threads_listing_context, remote_state):
        Move definitions and declarations higher up.
        (remote_target) <~remote_target>: Declare.
        (remote_download_command_source, remote_file_put, remote_file_get)
        (remote_file_delete, remote_hostio_pread, remote_hostio_pwrite)
        (remote_hostio_pread_vFile, remote_hostio_send_command)
        (remote_hostio_set_filesystem, remote_hostio_open)
        (remote_hostio_close, remote_hostio_unlink, remote_state)
        (get_remote_state, get_remote_packet_size, get_memory_packet_size)
        (get_memory_write_packet_size, get_memory_read_packet_size)
        (append_pending_thread_resumptions, remote_detach_1)
        (append_resumption, remote_resume_with_vcont)
        (add_current_inferior_and_thread, wait_ns, wait_as)
        (process_stop_reply, remote_notice_new_inferior)
        (process_initial_stop_replies, remote_add_thread)
        (btrace_sync_conf, remote_btrace_maybe_reopen)
        (remove_new_fork_children, kill_new_fork_children)
        (discard_pending_stop_replies, stop_reply_queue_length)
        (check_pending_events_prevent_wildcard_vcont)
        (discard_pending_stop_replies_in_queue, stop_reply)
        (remote_notif_remove_queued_reply, stop_reply *queued_stop_reply)
        (peek_stop_reply, remote_parse_stop_reply, remote_stop_ns)
        (remote_interrupt_as, remote_interrupt_ns)
        (remote_get_noisy_reply, remote_query_attached)
        (remote_add_inferior, remote_current_thread, get_current_thread)
        (set_thread, set_general_thread, set_continue_thread)
        (set_general_process, write_ptid)
        (remote_unpack_thread_info_response, remote_get_threadinfo)
        (parse_threadlist_response, remote_get_threadlist)
        (remote_threadlist_iterator, remote_get_threads_with_ql)
        (remote_get_threads_with_qxfer)
        (remote_get_threads_with_qthreadinfo, extended_remote_restart)
        (get_offsets, remote_check_symbols, remote_supported_packet)
        (remote_query_supported, remote_packet_size)
        (remote_serial_quit_handler, remote_detach_pid)
        (remote_vcont_probe, remote_resume_with_hc)
        (send_interrupt_sequence, interrupt_query)
        (remote_notif_get_pending_events, fetch_register_using_p)
        (send_g_packet, process_g_packet, fetch_registers_using_g)
        (store_register_using_P, store_registers_using_G)
        (set_remote_traceframe, check_binary_download)
        (remote_write_bytes_aux, remote_write_bytes, remote_read_bytes_1)
        (remote_xfer_live_readonly_partial, remote_read_bytes)
        (remote_send_printf, remote_flash_write, readchar)
        (remote_serial_write, putpkt, putpkt_binary, skip_frame)
        (read_frame, getpkt, getpkt_or_notif_sane_1, getpkt_sane)
        (getpkt_or_notif_sane, remote_vkill, remote_kill_k)
        (extended_remote_disable_randomization, extended_remote_run)
        (send_environment_packet, extended_remote_environment_support)
        (extended_remote_set_inferior_cwd, remote_write_qxfer)
        (remote_read_qxfer, push_stop_reply, vcont_r_supported)
        (packet_command): Now methods of ...
        (remote_target): ... this class.
        (m_remote_state) <remote_target>: New field.
        (struct remote_state) <stop_reply_queue,
        remote_async_inferior_event_token, wait_forever_enabled_p>: New
        fields.
        (remote_state::remote_state): Allocate stop_reply_queue.
        (remote_state): Delete global.
        (get_remote_state_raw): Delete.
        (remote_target::get_remote_state): Allocate m_remote_state on
        demand.
        (get_current_remote_target): New.
        (remote_ops, extended_remote_ops): Delete.
        (wait_forever_enabled_p, remote_async_inferior_event_token):
        Delete, moved to struct remote_state.
        (remote_target::close): Delete self.  Destruction bits split to
        ...
        (remote_target::~remote_target): ... this.
        (show_memory_packet_size): Adjust to use
        get_current_remote_target.
        (struct protocol_feature) <func>: Add remote_target parameter.
        All callers adjusted.
        (curr_quit_handler_target): New.
        (remote_serial_quit_handler): Reimplement.
        (remote_target::open_1): Adjust to use get_current_remote_target.
        Heap-allocate remote_target/extended_remote_target instances.
        (vcont_builder::vcont_builder): Add remote_target parameter, and
        save it in m_remote.  All callers adjusted.
        (vcont_builder::m_remote): New field.
        (vcont_builder::restart, vcont_builder::flush)
        (vcont_builder::push_action): Use it.
        (remote_target::commit_resume): Use it.
        (struct queue_iter_param) <remote>: New field.
        (remote_target::remove_new_fork_children): Fill in 'remote' field.
        (check_pending_event_prevents_wildcard_vcont_callback_data): New.
        (check_pending_event_prevents_wildcard_vcont_callback)
        (remote_target::check_pending_events_prevent_wildcard_vcont)
        (remote_target::discard_pending_stop_replies)
        (remote_target::discard_pending_stop_replies_in_queue)
        (remote_target::remote_notif_remove_queued_reply): Fill in
        'remote' field.
        (remote_notif_get_pending_events): New.
        (remote_target::readchar, remote_target::remote_serial_write):
        Save/restore curr_quit_handler_target.
        (putpkt): New.
        (kill_new_fork_children): Fill in 'remote' field.
        (packet_command): Use get_current_remote_target, defer to
        remote_target method of same name.
        (scoped_remote_fd::scoped_remote_fd): Add 'remote_target'
        parameter, and save it in m_remote.  All callers adjusted.
        (scoped_remote_fd::release): Use m_remote.
        (scoped_remote_fd::m_remote): New field.
        (remote_file_put, remote_file_get, remote_file_delete): Use
        get_current_remote_target, defer to remote_target method of same
        name.
        (remote_btrace_reset): Add remote_state paremeter.  Update all
        callers.
        (remote_async_inferior_event_handler). Pass down 'data'.
        (remote_new_objfile): Use get_current_remote_target.
        (remote_target::vcont_r_supported): New.
        (set_range_stepping): Use get_current_remote_target and
        remote_target::vcont_r_supported.
        (_initialize_remote): Don't allocate 'remote_state' and
        'stop_reply_queue' globals.
        * remote.h (struct remote_target): Forward declare.
        (getpkt, putpkt, remote_notif_get_pending_events): Add
        'remote_target' parameter.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (vcont_builder): Now a class.  Make all data members
        private.
        (vcont_builder) <vcont_builder, restart, flush, push_action>:
        Declare methods.
        (vcont_builder_restart): Rename to ...
        (vcont_builder::restart): ... this.
        (vcont_builder_flush): Rename to ...
        (vcont_builder::flush): ... this.
        (vcont_builder_push_action): Rename to ...
        (vcont_builder::push_action): ... this.
        (remote_target::commit_resume): Adjust.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE): Rename to ...
        (DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED): ... this.
        (get_fixed_memory_packet_size): New.
        (get_memory_packet_size): Use it.
        (set_memory_packet_size): Don't override the config size with
        DEFAULT_MAX_MEMORY_PACKET_SIZE.
        (show_memory_packet_size): Use get_fixed_memory_packet_size.
        Don't refer to get_memory_packet_size if not connected to a remote
        target.  Show "(default)" if configured size is 0.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_target::mourn_inferior): Move
        discard_pending_stop_replies call here from ...
        (_initialize_remote): ... here.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (compare_section_command): Remove set_general_process
        call.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (struct packet_reg, struct remote_arch_state):
        Move higher up in the file.
        (remote_state) <m_arch_states>: Store remote_arch_state values
        instead of remote_arch_state pointers.
        (remote_state::get_remote_arch_state): Adjust.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c: Include <unordered_map>.
        (remote_state): Now a class.
        (remote_state) <get_remote_arch_state>: Declare method.
        <get_remote_arch_state>: New field.
        (remote_arch_state) <remote_arch_state>: Declare ctor.
        <regs>: Now a unique_ptr.
        (remote_gdbarch_data_handle): Delete.
        (get_remote_arch_state): Delete.
        (remote_state::get_remote_arch_state): New.
        (get_remote_state): Adjust to call remote_state's
        get_remote_arch_state method.
        (init_remote_state): Delete, bits factored out to ...
        (remote_arch_state::remote_arch_state): ... this new method.
        (get_remote_packet_size, get_memory_packet_size)
        (process_g_packet, remote_target::fetch_registers)
        (remote_target::prepare_to_store, store_registers_using_G)
        (remote_target::store_registers, remote_target::get_trace_status):
        Adjust to call remote_state's method.
        (_initialize_remote): Remove reference to
        remote_gdbarch_data_handle.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (struct readahead_cache) <invalidate, invalidate_fd,
        pread>: New method declarations.
        (remote_target::open_1): Adjust.
        (readahead_cache_invalidate): Rename to ...
        (readahead_cache::invalidate): ... this, and adjust to be a class
        method.
        (readahead_cache_invalidate_fd): Rename to ...
        (readahead_cache::invalidate_fd): ... this, and adjust to be a
        class method.
        (remote_hostio_pwrite): Adjust.
        (remote_hostio_pread_from_cache): Rename to ...
        (readahead_cache::pread): ... this, and adjust to be a class
        method.
        (remote_hostio_close): Adjust.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_hostio_close_cleanup): Delete.
        (class scoped_remote_fd): New.
        (remote_file_put, remote_file_get): Use it.

2018-05-22  Pedro Alves  <palves@redhat.com>

        (struct vCont_action_support): Use bool and initialize all fields.
        (struct readahead_cache): Initialize all fields.
        (remote_state): Use bool and initialize all fields.
        (remote_state::remote_state, remote_state::~remote_state): New.
        (new_remote_state): Delete.
        (_initialize_remote): Use new to allocate remote_state.

2018-05-22  Pedro Alves  <palves@redhat.com>
            張俊芝  <zjz@zjz.name>

        PR gdb/22973
        * c-exp.y: Include "c-support.h".
        (parse_number, c_parse_escape, lex_one_token): Use TOLOWER instead
        of tolower.  Use c_ident_is_alpha to scan names.
        * c-lang.c: Include "c-support.h".
        (convert_ucn, convert_octal, convert_hex, convert_escape): Use
        ISXDIGIT instead of isxdigit and ISDIGIT instead of isdigit.
        * c-support.h: New file, with bits factored out from ...
        * cp-name-parser.y: ... this file.
        Include "c-support.h".
        (cp_ident_is_alpha, cp_ident_is_alnum): Deleted, moved to
        c-support.h and renamed.
        (symbol_end, yylex): Adjust.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * arch/ppc-linux-common.c (ppc_linux_has_isa205): Change the
        parameter type to CORE_ADDR.
        * arch/ppc-linux-common.h (ppc_linux_has_isa205): Change the
        parameter type in declaration to CORE_ADDR.
        * ppc-linux-tdep.c (ppc_linux_core_read_description): Call
        target_auxv_search to get AT_HWCAP and use the result to get the
        target description.
        * ppc-linux-nat.c (ppc_linux_get_hwcap): Change the return type
        to CORE_ADDR. Remove the cast of the return value to unsigned
        long. Fix error predicate of target_auxv_search.
        (ppc_linux_nat_target::read_description): Change the type of the
        hwcap variable to CORE_ADDR.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * rs6000-tdep.c (rs6000_gdbarch_init): Assign 1 to have_dfp only
        if the size of fpscr is larger than 32 bits.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * ppc-linux-tdep.c (ppc_linux_vsxregset): New function.
        (ppc32_linux_vsxregmap): New global.
        (ppc32_linux_vsxregset): Initialize with ppc32_linux_vsxregmap,
        regcache_supply_regset, and regcache_collect_regset.
        * ppc-linux-tdep.h (ppc_linux_vsxregset): Declare.
        * ppc-linux-nat.c (supply_vsxregset, fill_vsxregset): Remove.
        (fetch_vsx_register, store_vsx_register): Remove.
        (fetch_vsx_registers): Add regno parameter. Get regset using
        ppc_linux_vsxregset. Use regset to supply registers.
        (store_vsx_registers): Add regno parameter. Get regset using
        ppc_linux_vsxregset. Use regset to collect registers.
        (fetch_register): Call fetch_vsx_registers instead of
        fetch_vsx_register.
        (store_register): Call store_vsx_registers instead of
        store_vsx_register.
        (fetch_ppc_registers): Call fetch_vsx_registers with -1 for the
        new regno parameter.
        (store_ppc_registers): Call store_vsx_registers with -1 for the
        new regno parameter.
        * rs6000-tdep.c (ppc_vsx_support_p, ppc_supply_vsxreget)
        (ppc_collect_vsxregset): Remove.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * ppc-tdep.h (struct ppc_reg_offsets): Remove vector register
        offset fields.
        * ppc-fbsd-tdep.c (ppc32_fbsd_reg_offsets): Remove initializers
        for vector register offset fields.
        (ppc64_fbsd_reg_offsets): Likewise.
        * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Remove assignment
        to vector register offset fields.
        * ppc-obsd-tdep.c (_initialize_ppcnbsd_tdep): Remove assignment
        to vector register offset fields.
        * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Remove assignment to
        vector register offset fields.
        * rs6000-aix-tdep.c (rs6000_aix32_reg_offsets): Remove
        initializers for vector register offset fields.
        (rs6000_aix64_reg_offsets): Likewise.
        * rs6000-tdep.c (ppc_vrreg_offset): Remove.
        (ppc_supply_vrregset): Remove.
        (ppc_collect_vrregset): Remove.
        * ppc-linux-tdep.c (ppc_linux_collect_vrregset): New function.
        (ppc_linux_vrregset) : New function.
        (ppc32_le_linux_vrregmap, ppc32_be_linux_vrregmap)
        (ppc32_le_linux_vrregset, ppc32_be_linux_vrregset): New globals.
        (ppc32_linux_vrregset): Remove.
        (ppc_linux_iterate_over_regset_sections): Call ppc_linux_vrregset
        and use result instead of ppc32_linux_vrregset.
        (ppc32_linux_reg_offsets): Remove initializers for vector register
        offset fields.
        (ppc64_linux_reg_offsets): Likewise.
        * ppc-linux-tdep.h (ppc_linux_vrregset): New declaration.
        * ppc-linux-nat.c: Include regset.h.
        (gdb_vrregset_t): Adjust comment to account for little-endian
        mode.
        (supply_vrregset, fill_vrregset): Remove.
        (fetch_altivec_register, store_altivec_register): Remove.
        (fetch_altivec_registers): Add regno parameter. Get regset using
        ppc_linux_vrregset. Use regset to supply registers.
        (store_altivec_registers): Add regno parameter. Get regset using
        ppc_linux_vrregset. Use regset to collect registers.
        (fetch_register): Call fetch_altivec_registers instead of
        fetch_altivec_register.
        (store_register): Call store_altivec_registers instead of
        store_altivec_register.
        (fetch_ppc_registers): Call fetch_altivec_registers with -1 for
        the new regno parameter.
        (store_ppc_registers): Call store_altivec_registers with -1 for
        the new regno parameter.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_VRREGSET)
        (PPC_LINUX_SIZEOF_VSXREGSET): Define.
        * ppc-linux-nat.c (SIZEOF_VSXREGS, SIZEOF_VRREGS): Remove.
        (gdb_vrregset_t): Change array type size to
        PPC_LINUX_SIZEOF_VRREGSET.
        (gdb_vsxregset_t): Change array type size to
        PPC_LINUX_SIZEOF_VSXREGSET.
        * ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections):
        Change integer literals to PPC_LINUX_SIZEOF_VRREGSET and
        PPC_LINUX_SIZEOF_VSXREGSET.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * configure.nat <linux powerpc>: Add ppc-linux.o to NATDEPFILES.
        * ppc-linux-nat.c (ppc_linux_target_wordsize): Move to
        nat/ppc-linux.c.
        (ppc_linux_nat_target::auxv_parse): Get thread id tid. Call
        ppc_linux_target_wordsize with tid.
        (ppc_linux_nat_target::read_description): Call ppc_linux_target
        wordsize with tid.
        * nat/ppc-linux.c: Include nat/gdb_ptrace.h.
        (ppc64_64bit_inferior_p): Add static and inline specifiers.
        (ppc_linux_target_wordsize): Move here from ppc-linux-nat.c. Add
        tid parameter. Remove static specifier.
        * nat/ppc-linux.h (ppc64_64bit_inferior_p): Remove declaration.
        (ppc_linux_target_wordsize): New declaration.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * arch/ppc-linux-common.c: New file.
        * arch/ppc-linux-common.h: New file.
        * arch/ppc-linux-tdesc.h: New file.
        * configure.tgt (powerpc*-*-linux*): Add arch/ppc-linux-common.o.
        * Makefile.in (ALL_TARGET_OBS): Add arch/ppc-linux-common.o.
        (HFILES_NO_SRCDIR): Add arch/ppc-linux-common.h and
        arch/ppc-linux-tdesc.h.
        * ppc-linux-nat.c: Include arch/ppc-linux-common.h and
        arch/ppc-linux-tdesc.h.
        (ppc_linux_nat_target::read_description): Remove target
        description matching code. Fill a ppc_linux_features struct and
        call ppc_linux_match_description with it. Move comment about ISA
        2.05 to ppc-linux-common.c.
        * ppc-linux-tdep.c: Include arch/ppc-linux-common.h and
        arch/ppc-linux-tdesc.h.
        (ppc_linux_core_read_description): Remove target description
        matching code. Fill a ppc_linux_features struct and call
        ppc_linux_match_description with it.
        * ppc-linux-tdep.h (tdesc_powerpc_32l, tdesc_powerpc_64l)
        (tdesc_powerpc_altivec32l, tdesc_powerpc_altivec64l)
        (tdesc_powerpc_cell32l, tdesc_powerpc_cell64l)
        (tdesc_powerpc_vsx32l, tdesc_powerpc_vsx64l)
        (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_64l)
        (tdesc_powerpc_isa205_altivec32l, tdesc_powerpc_isa205_altivec64l)
        (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_vsx64l)
        (tdesc_powerpc_e500l): Remove.

2018-05-22  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (catch_assert_command): Pass empty string instead
        of NULL for excep_string argument.

2018-05-22  Maciej W. Rozycki  <macro@mips.com>

        * mips-linux-nat.c (mips64_linux_register_addr): Return -1 if
        the width of the requested register exceeds the width of the
        `ptrace' data type.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * printcmd.c (output_command): Remove.
        (output_command_const): Rename to output_command.
        * valprint.h (output_command): Rename from output_command_const.
        * tracepoint.c (trace_dump_actions): Call output_command.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * mi/mi-cmd-catch.c (mi_cmd_catch_assert)
        (mi_cmd_catch_exception, mi_cmd_catch_handlers): Update.
        * ada-lang.h (create_ada_exception_catchpoint): Update.
        * ada-lang.c (struct ada_catchpoint) <excep_string>: Now a
        std::string.
        (create_excep_cond_exprs, ~ada_catchpoint)
        (should_stop_exception, print_one_exception)
        (print_mention_exception, print_recreate_exception): Update.
        (ada_get_next_arg): Remove.
        (catch_ada_exception_command_split): Use std::string.  Change type
        of "excep_string", "cond_string".
        (catch_ada_exception_command): Update.
        (create_ada_exception_catchpoint): Change type of excep_string.
        (ada_exception_sal): Remove excep_string parameter.
        (~ada_catchpoint): Remove.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (ada_collect_symbol_completion_matches): Remove
        cleanup.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (ada_exception_message_1, ada_exception_message):
        Return unique_xmalloc_ptr.
        (print_it_exception): Update.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (trace_dump_actions): Use std::string.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * symfile.c (reread_symbols): Use std::string for original_name.

2018-05-21  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (dwarf2_read_debug_names): Use std::unique_ptr.
        (mapped_index_base): Use DISABLE_COPY_AND_ASSIGN.  Default
        constructor.

2018-05-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/traits.h (HAVE_IS_TRIVIALLY_COPYABLE): Rename the wrong
        instance to...
        (HAVE_IS_TRIVIALLY_CONSTRUCTIBLE): ... this.
        * objfiles.c (get_objfile_bfd_data): Allocate
        objfile_per_bfd_storage with obstack_new when allocating on
        obstack.

2018-05-20  Simon Marchi  <simon.marchi@ericsson.com>

        * ada-lang.c (cache_symbol): Use XOBNEW and/or XOBNEWVEC and/or
        OBSTACK_ZALLOC.
        * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
        * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
        * mdebugread.c (mdebug_build_psymtabs): Likewise.
        (add_pending): Likewise.
        (parse_symbol): Likewise.
        (parse_partial_symbols): Likewise.
        (psymtab_to_symtab_1): Likewise.
        (new_psymtab): Likewise.
        (elfmdebug_build_psymtabs): Likewise.
        * minsyms.c (terminate_minimal_symbol_table): Likewise.
        * objfiles.c (get_objfile_bfd_data): Likewise.
        (objfile_register_static_link): Likewise.
        * psymtab.c (allocate_psymtab): Likewise.
        * stabsread.c (read_member_functions): Likewise.
        * xcoffread.c (xcoff_end_psymtab): Likewise.

2018-05-20  Simon Marchi  <simon.marchi@ericsson.com>

        * common/traits.h (HAVE_IS_TRIVIALLY_COPYABLE): Define if
        compiler supports std::is_trivially_constructible.
        * common/poison.h: Include obstack.h.
        (IsMallocable): Define to is_trivially_constructible if the
        compiler supports it, define to true_type otherwise.
        (xobnew): New.
        (XOBNEW): Redefine.
        (xobnewvec): New.
        (XOBNEWVEC): Redefine.
        * gdb_obstack.h (obstack_zalloc): New.
        (OBSTACK_ZALLOC): Redefine.
        (obstack_calloc): New.
        (OBSTACK_CALLOC): Redefine.
        (obstack_new): New.
        * gdbarch.sh: Include gdb_obstack in gdbarch.h.
        (gdbarch_obstack): New declaration in gdbarch.h, definition in
        gdbarch.c.
        (GDBARCH_OBSTACK_CALLOC, GDBARCH_OBSTACK_ZALLOC): Use
        obstack_calloc/obstack_zalloc.
        (gdbarch_obstack_zalloc): Remove.
        * target-descriptions.c (tdesc_data_init): Use obstack_new.

2018-05-19  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * stack.c (backtrace_command_1): Remove useless variable int i.

2018-05-19  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * stack.c (print_frame_info): Fix comment.

2018-05-18  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (struct dwz_file): Add constructor, initializers.
        <dwz_bfd>: Now a gdb_bfd_ref_ptr.
        (~dwarf2_per_objfile): Update
        (dwarf2_get_dwz_file): Use new.
        * dwarf2read.h (struct dwarf2_per_objfile) <dwz_file>: Now a
        unique_ptr.

2018-05-18  Tom Tromey  <tom@tromey.com>

        * dwarf2read.h (struct dwarf2_per_objfile) <dwp_file>: Now a
        unique_ptr.
        * dwarf2read.c (struct dwp_file): Add constructor and
        initializers.
        (open_and_init_dwp_file): Return a unique_ptr.
        (dwarf2_per_objfile, create_dwp_hash_table)
        (create_dwo_unit_in_dwp_v1, create_dwo_unit_in_dwp_v2)
        (lookup_dwo_unit_in_dwp): Update.
        (open_and_init_dwp_file, get_dwp_file): Update.

2018-05-18  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (dwarf2_per_objfile): Update.
        (struct mapped_index): Add initializers.
        (dwarf2_read_index): Use new.
        (dw2_symtab_iter_init): Update.
        * dwarf2read.h (struct dwarf2_per_objfile) <index_table>: Now a
        unique_ptr.

2018-05-18  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (mapped_index) <total_size>: Remove.

2018-05-18  Simon Marchi  <simon.marchi@ericsson.com>

        * unittests/format_pieces-selftests.c (test_format_specifier):
        Add ARI comments.

2018-05-18  Tom Tromey  <tom@tromey.com>

        * c-typeprint.c (maybe_print_hole): New function.
        (c_print_type_struct_field_offset): Update.
        (c_type_print_base_struct_union): Call maybe_print_hole.

2018-05-17  Keith Seitz  <keiths@redhat.com>

        * breakpoint.c (build_bpstat_chain): New function, moved from
        bpstat_stop_status.
        (bpstat_stop_status): Add optional parameter, `stop_chain'.
        If no stop chain is passed, call build_bpstat_chain to build it.
        * breakpoint.h (build_bpstat_chain): Declare.
        (bpstat_stop_status): Move documentation here from breakpoint.c.
        * infrun.c (handle_signal_stop): Before eliding inlined frames,
        build the stop chain and pass it to skip_inline_frames.
        Pass this stop chain to bpstat_stop_status.
        * inline-frame.c: Include breakpoint.h.
        (stopped_by_user_bp_inline_frame): New function.
        (skip_inline_frames): Add parameter `stop_chain'.
        Move documention to inline-frame.h.
        If non-NULL, use stopped_by_user_bp_inline_frame to determine
        whether the frame should be elided.
        * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
        Add moved documentation and update for new parameter.

2018-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        PR cli/14975
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/format_pieces-selftests.c.
        * common/format.h (format_piece) <operator==>: New.
        (format_pieces) <operator[]>: Remove.
        * common/format.c (format_pieces::format_pieces): Handle \e.
        * unittests/format_pieces-selftests.c: New.

2018-05-17  Tom Tromey  <tom@tromey.com>

        PR symtab/23010:
        * dwarf2read.c (load_cu, dw2_do_instantiate_symtab)
        (dw2_instantiate_symtab): Add skip_partial parameter.
        (dw2_find_last_source_symtab, dw2_map_expand_apply)
        (dw2_lookup_symbol, dw2_expand_symtabs_for_function)
        (dw2_expand_all_symtabs, dw2_expand_symtabs_with_fullname)
        (dw2_expand_symtabs_matching_one)
        (dw2_find_pc_sect_compunit_symtab)
        (dw2_debug_names_lookup_symbol)
        (dw2_debug_names_expand_symtabs_for_function): Update.
        (init_cutu_and_read_dies): Add skip_partial parameter.
        (process_psymtab_comp_unit, build_type_psymtabs_1)
        (process_skeletonless_type_unit, load_partial_comp_unit)
        (psymtab_to_symtab_1): Update.
        (load_full_comp_unit): Add skip_partial parameter.
        (process_imported_unit_die, dwarf2_read_addr_index)
        (follow_die_offset, dwarf2_fetch_die_loc_sect_off)
        (dwarf2_fetch_constant_bytes, dwarf2_fetch_die_type_sect_off)
        (read_signatured_type): Update.

2018-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        * value.c (release_value): Remove unused variable.
        (record_latest_value): Likewise.
        (access_value_history): Likewise.
        (preserve_values): Likewise.

2018-05-17  Tom Tromey  <tom@tromey.com>

        * extension.h (struct ext_lang_type_printers) <py_type_printers>:
        Initialize.

2018-05-16  Maciej W. Rozycki  <macro@mips.com>

        PR gdb/22286
        * linux-nat-trad.c (linux_nat_trad_target::fetch_register):
        Also handle registers whose width is not a multiple of
        PTRACE_TYPE_RET.
        (linux_nat_trad_target::store_register): Likewise.

2018-05-16  Tom Tromey  <tom@tromey.com>

        * gdbcore.h (core_bfd): Redefine.
        * corelow.c (core_target::close): Update.
        (core_target_open): Update.
        * progspace.h (struct program_space) <cbfd>: Now a
        gdb_bfd_ref_ptr.

2018-05-16  Tom Tromey  <tom@tromey.com>

        PR cli/19551:
        * symfile-add-flags.h (enum symfile_add_flags)
        <SYMFILE_NOT_FILENAME>: New constant.
        * symfile.c (read_symbols): Use SYMFILE_NOT_FILENAME.  Get
        objfile name from BFD.
        (symbol_file_add_with_addrs): Check SYMFILE_NOT_FILENAME.
        * minidebug.c (find_separate_debug_file_in_section): Put
        ".gnu_debugdata" into BFD's file name.

2018-05-16  Simon Marchi  <simon.marchi@ericsson.com>

        * regcache.c (regcache_read_ftype, regcache_write_ftype):
        Remove.

2018-05-15  Tamar Christina  <tamar.christina@arm.com>

        PR binutils/21446
        * aarch64-tdep.c (aarch64_analyze_prologue,
        aarch64_software_single_step, aarch64_displaced_step_copy_insn):
        Indicate not interested in errors.

2018-05-15  Maciej W. Rozycki  <macro@mips.com>

        * mips-linux-nat.c (mips_linux_nat_target::fetch_registers):
        Supply the MIPS_ZERO_REGNUM register.

2018-05-15  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mask_address_var): Make variable static.

2018-05-14  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (rust_union_quirks): Clear rust_unions.

2018-05-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * i387-tdep.c (i387_collect_xsave): Use FXSAVE_MXCSR_ADDR not
        FXSAVE_ADDR for the mxcsr register.

2018-05-11  Max Filippov  <jcmvbkbc@gmail.com>

        * configure.tgt (xtensa*-*-linux*): Drop gdb_target definition.

2018-05-11  Pedro Alves  <palves@redhat.com>

        * corelow.c (core_target) <core_target>: No longer inline.
        Initialize m_core_gdbarch, m_core_vec and build the section table
        here.
        <~core_target>: New.
        <core_gdbarch, get_core_register_section>: New methods.
        <m_core_section_table, m_core_vec, m_core_gdbarch>: New fields,
        factored out from ...
        <core_data, core_vec, core_gdbarch>: ... these deleted globals.
        (core_ops): Delete.
        (sniff_core_bfd): Add gdbarch parameter.
        (core_close): Delete, merged into ...
        (core_target::close): ... here.  Delete self.
        (core_close_cleanup): Delete.
        (core_target_open): Allocate a core_target on the heap.  Use a
        unique_ptr instead of a cleanup.  Bits moved into the core_target
        ctor.  Adjust to use core_target methods instead of globals.
        (get_core_register_section): Rename to ...
        (core_target::get_core_register_section): ... this and adjust.
        (struct get_core_registers_cb_data): New.
        (get_core_registers_cb): Use it.  Use bool.
        (core_target::fetch_registers, core_target::files_info)
        (core_target::xfer_partial, core_target::read_description)
        (core_target::pid_to, core_target::thread_name): Adjust to
        reference class fields instead of globals.
        * target.h (struct target_ops_deleter, target_ops_up): New.

2018-05-11  Pedro Alves  <palves@redhat.com>

        * corefile.c (core_file_command): Move to corelow.c.
        * corelow.c (the_core_target): Delete.
        (core_file_command): Moved from corefile.c.  Check exec_bfd
        instead of the_core_target.  Use target_detach instead of calling
        into the_core_target directly.
        (maybe_say_no_core_file_now): New.
        (core_target::detach): Use it.
        (_initialize_corelow): Remove references to the_core_target.
        * gdbcore.h (the_core_target): Delete.

2018-05-11  Tom Tromey  <tromey@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * corefile.c (core_bfd): Remove.
        * gdbcore.h (core_bfd): Now a macro.
        * progspace.h (struct program_space) <cbfd>: New field.

2018-05-11  Tom Tromey  <tom@tromey.com>

        * mdebugread.c (parse_partial_symbols, psymtab_to_symtab_1): Use
        gdb::def_vector.

2018-05-10  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS): Use -Wimplicit-fallthrough=3.

2018-05-10  Joel Brobecker  <brobecker@adacore.com>

        PR server/23158:
        * regformats/regdat.sh: Adjust script, following the addition
        of the new expedite_regs parameter to init_target_desc.

2018-05-10  Omair Javaid  <omair.javaid@linaro.org>
    
        PR gdb/23127
        * aarch64-linux-tdep.c (aarch64_linux_init_abi): Add call to
        set_gdbarch_significant_addr_bit.
        * aarch64-tdep.c (aarch64_gdbarch_init): Remove call to
        set_gdbarch_significant_addr_bit.
        * utils.c (address_significant): Update to sign extend addr.

2018-05-09  Max Filippov  <jcmvbkbc@gmail.com>

        * xtensa-linux-tdep.c (xtensa-tdep.h): New include.
        (xtensa_linux_init_abi): Limit tdep->num_regs by
        tdep->num_nopriv_regs.
        * xtensa-tdep.c (xtensa_derive_tdep): Calculate
        tdep->num_nopriv_regs and only copy it to tdep->num_regs if it's
        not initialized.

2018-05-08  Simon Marchi  <simon.marchi@ericsson.com>

        * unittests/string_view-selftests.c: Define GNULIB_NAMESPACE.

2018-05-08  Andrew Burgess  <andrew.burgess@embecosm.com>

        * common/x86-xstate.h (I387_FCTRL_INIT_VAL): New constant.
        (I387_MXCSR_INIT_VAL): New constant.
        * amd64-tdep.c (amd64_supply_xsave): Only read state from xsave
        buffer if it was supplied by the inferior.
        * i387-tdep.c (i387_supply_fsave): Use I387_MXCSR_INIT_VAL.
        (i387_xsave_get_clear_bv): New function.
        (i387_supply_xsave): Only read x87 control registers from the
        xsave buffer if the feature is enabled, and the state will have
        been written, otherwise, provide a suitable default.
        (i387_collect_xsave): Pre-clear all registers in xsave buffer,
        including x87 control registers.  Update control registers if they
        have changed from the default value, and mark features as enabled
        as required.
        * i387-tdep.h (i387_xsave_get_clear_bv): Declare.

2018-05-08  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-tdep.c (info_spu_event_command): Fix output formatting.

2018-05-07  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS): Add -Wduplicated-cond.

2018-05-07  Tom Tromey  <tom@tromey.com>

        PR tdep/20362:
        * arm-tdep.c (arm_record_vfp_data_proc_insn): Properly mask off D
        bit.  Use correct value for VDIV.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS): Add -Wimplicit-fallthrough.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * linux-record.c (record_linux_system_call) <case
        RECORD_SYS_RECVFROM>: Add "break".

2018-05-04  Tom Tromey  <tom@tromey.com>

        * mi/mi-main.c (mi_cmd_trace_frame_collected) <REGISTERS_FORMAT>:
        Add missing "break".
        * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals) <NO_FRAME_FILTERS>:
        Add missing "break".

2018-05-04  Tom Tromey  <tom@tromey.com>

        * rs6000-tdep.c (ppc_process_record_op4)
        (ppc_process_record_op63): Add fall-through comment.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * i386-tdep.c (i386_process_record): Add fall-through comment.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * stabsread.c (define_symbol) <case 'p'>: Add fall-through
        comment.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * riscv-tdep.c (riscv_isa_xlen): Add fall-through comment.
        * utils.c (can_dump_core) <LIMIT_CUR>: Add fall-through comment.
        * eval.c (fetch_subexp_value) <MEMORY_ERROR>: Add fall-through
        comment.
        * d-valprint.c (d_val_print) <TYPE_CODE_STRUCT>: Add fall-through
        comment.
        * coffread.c (coff_symtab_read) <C_LABEL>: Add fall-through
        comment.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * dwarf2loc.c (unimplemented): Add ATTRIBUTE_NORETURN.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * s390-tdep.c (s390_process_record): Fix fall-through comments.
        * xcoffread.c (scan_xcoff_symtab): Move comment later.
        * symfile.c (section_is_mapped): Fix fall-through comment.
        * stabsread.c (define_symbol, read_member_functions): Fix
        fall-through comment.
        * s390-linux-tdep.c (s390_process_record): Fix fall-through
        comment.
        * remote.c (remote_wait_as): Fix fall-through comment.
        * p-exp.y (yylex): Fix fall-through comment.
        * nat/x86-dregs.c (x86_length_and_rw_bits): Fix fall-through
        comment.
        * msp430-tdep.c (msp430_gdbarch_init): Fix fall-through comment.
        * mdebugread.c (parse_partial_symbols): Fix fall-through comment.
        * jv-exp.y (yylex): Fix fall-through comment.
        * go-exp.y (lex_one_token): Fix fall-through comment.
        * gdbtypes.c (get_discrete_bounds, rank_one_type): Fix
        fall-through comment.
        * f-exp.y (yylex): Fix fall-through comment.
        * dwarf2read.c (process_die): Fix fall-through comments.
        * dbxread.c (process_one_symbol): Fix fall-through comment.
        * d-exp.y (lex_one_token): Fix fall-through comment.
        * cp-name-parser.y (yylex): Fix fall-through comment.
        * coffread.c (coff_symtab_read): Fix fall-through comment.
        * c-exp.y (lex_one_token): Fix fall-through comment.
        * arm-tdep.c (arm_decode_miscellaneous): Fix fall-through
        comment.
        * arch/arm.c (arm_instruction_changes_pc): Fix fall-through
        comment.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR python/22730:
        * NEWS: Mention gdb.execute change.
        * gdbcmd.h (execute_control_command): Don't declare.
        * python/python.c (execute_gdb_command): Use read_command_lines_1,
        execute_control_commands, execute_control_commands_to_string.
        * cli/cli-script.h (execute_control_commands)
        (execute_control_commands_to_string): Declare.
        (execute_control_command): Add from_tty parameter.
        * cli/cli-script.c (execute_control_commands)
        (execute_control_commands_to_string): New functions.
        (execute_user_command): Use execute_control_commands.
        (execute_control_command_1): Add "from_tty" parameter.  Update.
        (execute_control_command): Likewise.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR python/22731:
        * NEWS: Mention that breakpoint commands are writable.
        * python/py-breakpoint.c (bppy_set_commands): New function.
        (breakpoint_object_getset) <"commands">: Use it.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (actions_command): Update.
        * mi/mi-cmd-break.c (mi_command_line_array)
        (mi_command_line_array_cnt, mi_command_line_array_ptr)
        (mi_read_next_line): Remove.
        (mi_cmd_break_commands): Update.
        * cli/cli-script.h (read_command_lines, read_command_lines_1): Use
        function_view.
        * cli/cli-script.c (get_command_line): Update.
        (process_next_line): Use function_view.  Constify.
        (recurse_read_control_structure, read_command_lines)
        (read_command_lines_1): Change argument types to function_view.
        (do_define_command, document_command): Update.
        * breakpoint.h (check_tracepoint_command): Don't declare.
        * breakpoint.c (check_tracepoint_command): Remove.
        (commands_command_1, create_tracepoint_from_upload): Update.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR gdb/11750:
        * cli/cli-script.h (enum command_control_type) <define_control>:
        New constant.
        * cli/cli-script.c (multi_line_command_p): Handle define_control.
        (build_command_line, execute_control_command_1)
        (process_next_line): Likewise.
        (do_define_command): New function, extracted from define_command.
        (define_command): Use it.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (actions_command): Update.
        * cli/cli-script.h (read_command_lines): Update.
        * cli/cli-script.c (read_command_lines): Constify prompt_arg.
        (MAX_TMPBUF): Remove define.
        (define_command): Use string_printf.
        (document_command): Likewise.
        * breakpoint.c (commands_command_1): Update.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * top.c (execute_command): Update.
        * cli/cli-script.h (print_command_lines): Now varargs.
        * cli/cli-script.c (print_command_lines): Now varargs.
        (execute_control_command_1) <case while_control, case if_control>:
        Update.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (all_tracepoint_actions): Rename from
        all_tracepoint_actions_and_cleanup.  Change return type.
        (actions_command, encode_actions_1, encode_actions)
        (trace_dump_actions, tdump_command): Update.
        * remote.c (remote_download_command_source): Update.
        * python/python.c (gdbpy_eval_from_control_command)
        (python_command, python_interactive_command): Update.
        * mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
        * guile/guile.c (guile_command)
        (gdbscm_eval_from_control_command, guile_command): Update.
        * compile/compile.c (compile_code_command)
        (compile_print_command, compile_to_object): Update.
        * cli/cli-script.h (struct command_lines_deleter): New.
        (counted_command_line): New typedef.
        (struct command_line): Add constructor, destructor.
        <body_list>: Remove.
        <body_list_0, body_list_1>: New members.
        (command_line_up): Remove typedef.
        (read_command_lines, read_command_lines_1, get_command_line):
        Update.
        (copy_command_lines): Don't declare.
        * cli/cli-script.c (build_command_line): Use "new".
        (get_command_line): Return counted_command_line.
        (print_command_lines, execute_user_command)
        (execute_control_command_1, while_command, if_command): Update.
        (realloc_body_list): Remove.
        (process_next_line, recurse_read_control_structure): Update.
        (read_command_lines, read_command_lines_1): Return counted_command_line.
        (free_command_lines): Use "delete".
        (copy_command_lines): Remove.
        (define_command, document_command, show_user_1): Update.
        * cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now
        a counted_command_line.
        * breakpoint.h (counted_command_line): Remove typedef.
        (breakpoint_set_commands): Update.
        * breakpoint.c (check_no_tracepoint_commands)
        (validate_commands_for_breakpoint): Update.
        (breakpoint_set_commands): Change commands to be a
        counted_command_line.
        (commands_command_1, update_dprintf_command_list)
        (create_tracepoint_from_upload): Update.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * cli/cli-decode.h (cmd_list_element): New constructor.
        (~cmd_list_element): New destructor.
        (struct cmd_list_element): Add initializers.
        * cli/cli-decode.c (do_add_cmd): Use "new".
        (delete_cmd): Use "delete".

2018-05-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves <palves@redhat.com>

        PR breakpoints/19806 and support for PR external/20207.
        * NEWS: Mention Aarch64 watchpoint improvements.
        * aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed
        watchpoints and PR external/20207 watchpoints.
        * nat/aarch64-linux-hw-point.c
        (kernel_supports_any_contiguous_range): New.
        (aarch64_watchpoint_offset): New.
        (aarch64_watchpoint_length): Support PR external/20207 watchpoints.
        (aarch64_point_encode_ctrl_reg): New parameter offset, new asserts.
        (aarch64_point_is_aligned): Support PR external/20207 watchpoints.
        (aarch64_align_watchpoint): New parameters aligned_offset_p and
        next_addr_orig_p.  Support PR external/20207 watchpoints.
        (aarch64_downgrade_regs): New.
        (aarch64_dr_state_insert_one_point): New parameters offset and
        addr_orig.
        (aarch64_dr_state_remove_one_point): Likewise.
        (aarch64_handle_breakpoint): Update caller.
        (aarch64_handle_aligned_watchpoint): Likewise.
        (aarch64_handle_unaligned_watchpoint): Support addr_orig and
        aligned_offset.
        (aarch64_linux_set_debug_regs): Remove const from state.  Call
        aarch64_downgrade_regs.
        (aarch64_show_debug_reg_state): Print also dr_addr_orig_wp.
        * nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ...
        (DR_CONTROL_MASK): ... this.
        (struct aarch64_debug_reg_state): New field dr_addr_orig_wp.
        (unsigned int aarch64_watchpoint_offset): New prototype.
        (aarch64_linux_set_debug_regs): Remove const from state.
        * utils.c (align_up, align_down): Move to ...
        * common/common-utils.c (align_up, align_down): ... here.
        * utils.h (align_up, align_down): Move to ...
        * common/common-utils.h (align_up, align_down): ... here.

2018-05-04  Joel Brobecker  <brobecker@adacore.com>

        * sparc-tdep.c (sparc_structure_return_p): Re-implement to
        match the ABI as summarized in GCC's gcc/config/sparc/sparc.c.
        (sparc_arg_by_memory_p): Renamed from sparc_arg_on_registers_p.
        Re-implement to match the ABI as summarized in GCC's
        gcc/config/sparc/sparc.c.  All callers updated.
        (sparc32_store_arguments): Remove assertion.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * printcmd.c: Don't include tui.h.
        (decode_format): Use skip_spaces.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR gdb/22619:
        * printcmd.c (last_count): New global.
        (x_command): Use saved count when repeating.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * nto-procfs.c (do_closedir_cleanup): Remove.
        (procfs_pidlist): Use gdb_dir_up.
        * procfs.c (do_closedir_cleanup): Remove.
        (proc_update_threads): Use gdb_dir_up.
        * common/filestuff.h (struct gdb_dir_deleter): New.
        (gdb_dir_up): New typedef.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (print_mention_exception): Use std::string.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (create_excep_cond_exprs): Update.
        (ada_exception_catchpoint_cond_string): Use std::string.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (xget_renaming_scope): Return std::string.
        (old_renaming_is_invisible): Update.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * bfd-target.c (target_bfd::m_bfd): Now a gdb_bfd_ref_ptr.
        (target_bfd::target_bfd, target_bfd::~target_bfd): Update.

2018-05-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c (spu_linux_nat_target::wait): Fix syntax error.

2018-05-04  Tom Tromey  <tom@tromey.com>

        * remote.c (remote_query_supported_append): Change type.
        (remote_check_symbols): Update.

2018-05-04  Paul Pluzhnikov  <ppluzhnikov@google.com>

        PR gdb/11420
        * configure.ac: Prepend libpython.
        * python/python-config.py: Likewise.
        * configure: Regenerate.

2018-05-03  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (%.c: %.l): Use -t instead of --stdout.

2018-05-03  Pedro Alves  <palves@redhat.com>

        * s390-linux-nat.c
        (s390_linux_nat_target::have_continuable_watchpoint): Mark with
        override.  Write 'true' instead of '1'.
        (s390_linux_nat_target::watchpoint_addr_within_range): Remove
        declaration.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use
        add_inf_child_target.
        * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use
        add_inf_child_target.
        * aix-thread.c (aix_thread_target_info): New.
        (aix_thread_target) <shortname, longname, doc>: Delete.
        <info>: New.
        * alpha-bsd-nat.c (_initialize_alphabsd_nat): Use
        add_inf_child_target.
        * alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
        add_inf_child_target.
        * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use
        add_inf_child_target.
        * amd64-linux-nat.c (_initialize_amd64_linux_nat): Use
        add_inf_child_target.
        * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use
        add_inf_child_target.
        * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use
        add_inf_child_target.
        * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use
        add_inf_child_target.
        * arm-linux-nat.c (_initialize_arm_linux_nat): Use
        add_inf_child_target.
        * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use
        add_inf_child_target.
        * bfd-target.c (target_bfd_target_info): New.
        (target_bfd) <shortname, longname, doc>: Delete.
        <info>: New.
        * bsd-kvm.c (bsd_kvm_target_info): New.
        (bsd_kvm_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (bsd_kvm_target::open): Rename to ...
        (bsd_kvm_target_open): ... this.  Adjust.
        * bsd-uthread.c (bsd_uthread_target_info): New.
        (bsd_uthread_target) <shortname, longname, doc>: Delete.
        <info>: New.
        * corefile.c (core_file_command): Adjust.
        * corelow.c (core_target_info): New.
        (core_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (core_target::open): Rename to ...
        (core_target_open): ... this.  Adjust.
        * ctf.c (ctf_target_info): New.
        (ctf_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (ctf_target::open): Rename to ...
        (ctf_target_open): ... this.
        (_initialize_ctf): Adjust.
        * exec.c (exec_target_info): New.
        (exec_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (exec_target::open): Rename to ...
        (exec_target_open): ... this.
        * gdbcore.h (core_target_open): Declare.
        * go32-nat.c (_initialize_go32_nat): Use add_inf_child_target.
        * hppa-linux-nat.c (_initialize_hppa_linux_nat): Use
        add_inf_child_target.
        * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use
        add_inf_child_target.
        * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use
        add_inf_child_target.
        * i386-darwin-nat.c (_initialize_i386_darwin_nat): Use
        add_inf_child_target.
        * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use
        add_inf_child_target.
        * i386-gnu-nat.c (_initialize_i386gnu_nat): Use
        add_inf_child_target.
        * i386-linux-nat.c (_initialize_i386_linux_nat): Use
        add_inf_child_target.
        * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use
        add_inf_child_target.
        * i386-obsd-nat.c (_initialize_i386obsd_nat): Use
        add_inf_child_target.
        * ia64-linux-nat.c (_initialize_ia64_linux_nat): Use
        add_inf_child_target.
        * inf-child.c (inf_child_target_info): New.
        (inf_child_target::info): New.
        (inf_child_open_target): Remove 'target' parameter.  Use
        get_native_target instead.
        (inf_child_target::open): Delete.
        (add_inf_child_target): New.
        * inf-child.h (inf_child_target) <shortname, longname, doc, open>:
        Delete.
        <info>: New.
        (add_inf_child_target): Declare.
        (inf_child_open_target): Declare.
        * linux-thread-db.c (thread_db_target_info): New.
        (thread_db_target) <shortname, longname, doc>: Delete.
        <info>: New.
        * m32r-linux-nat.c (_initialize_m32r_linux_nat): Use
        add_inf_child_target.
        * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use
        add_inf_child_target.
        * m68k-linux-nat.c (_initialize_m68k_linux_nat): Use
        add_inf_child_target.
        * m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use
        add_inf_child_target.
        * make-target-delegates (print_class): Adjust.
        * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use
        add_inf_child_target.
        * mips-linux-nat.c (_initialize_mips_linux_nat): Use
        add_inf_child_target.
        * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use
        add_inf_child_target.
        * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use
        add_inf_child_target.
        * nto-procfs.c (nto_native_target_info): New.
        (nto_procfs_target_native) <shortname, longname, doc>:
        Delete.
        <info>: New.
        (nto_procfs_target_info): New.
        (nto_procfs_target_procfs) <shortname, longname, doc>:
        Delete.
        <info>: New.
        (init_procfs_targets): Adjust.
        * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use
        add_inf_child_target.
        * ppc-linux-nat.c (_initialize_ppc_linux_nat): Use
        add_inf_child_target.
        * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use
        add_inf_child_target.
        * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use
        add_inf_child_target.
        * ravenscar-thread.c (ravenscar_target_info): New.
        (ravenscar_thread_target) <shortname, longname, doc>:
        Delete.
        <info>: New.
        * record-btrace.c (record_btrace_target_info):
        (record_btrace_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (record_btrace_target::open): Rename to ...
        (record_btrace_target_open): ... this.  Adjust.
        * record-full.c (record_longname, record_doc): New.
        (record_full_base_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (record_full_target_info): New.
        (record_full_target): <shortname>: Delete.
        <info>: New.
        (record_full_core_open_1, record_full_open_1): Update comments.
        (record_full_base_target::open): Rename to ...
        (record_full_open): ... this.
        (cmd_record_full_restore): Update.
        (_initialize_record_full): Update.
        * remote-sim.c (remote_sim_target_info): New.
        (gdbsim_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (gdbsim_target::open): Rename to ...
        (gdbsim_target_open): ... this.
        (_initialize_remote_sim): Adjust.
        * remote.c (remote_doc): New.
        (remote_target_info): New.
        (remote_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (extended_remote_target_info): New.
        (extended_remote_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (remote_target::open_1): Make static.  Adjust.
        * rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target.
        * s390-linux-nat.c (_initialize_s390_nat): Use
        add_inf_child_target.
        * sh-nbsd-nat.c (_initialize_shnbsd_nat): Use
        add_inf_child_target.
        * sol-thread.c (thread_db_target_info): New.
        (sol_thread_target) <shortname, longname, doc>: Delete.
        <info>: New.
        * sparc-linux-nat.c (_initialize_sparc_linux_nat): Use
        add_inf_child_target.
        * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use
        add_inf_child_target.
        * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use
        add_inf_child_target.
        * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
        add_inf_child_target.
        * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use
        add_inf_child_target.
        * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use
        add_inf_child_target.
        * spu-linux-nat.c (_initialize_spu_nat): Use
        add_inf_child_target.
        * spu-multiarch.c (spu_multiarch_target_info): New.
        (spu_multiarch_target) <shortname, longname, doc>: Delete.
        <info>: New.
        * target-delegates.c: Regenerate.
        * target.c: Include <unordered_map>.
        (target_ops_p): Delete.
        (DEF_VEC_P(target_ops_p)): Delete.
        (target_factories): New.
        (test_target_info): New.
        (test_target_ops::info): New.
        (open_target): Adjust to use target_factories.
        (add_target_with_completer): Rename to ...
        (add_target): ... this.  Change prototype.  Register target_info
        and open callback in target_factories.  Register target_info in
        command context instead of target_ops.
        (add_target): Delete old implementation.
        (add_deprecated_target_alias): Change prototype.  Adjust.
        (the_native_target): New.
        (set_native_target, get_native_target): New.
        (find_default_run_target): Use the_native_target.
        (find_attach_target, find_run_target): Simplify.
        (target_ops::open): Delete.
        (dummy_target_info): New.
        (dummy_target::shortname, dummy_target::longname)
        (dummy_target::doc): Delete.
        (dummy_target::info): New.
        (debug_target::shortname, debug_target::longname)
        (debug_target::doc): Delete.
        (debug_target::info): New.
        * target.h (struct target_info): New.
        (target_ops::~target_ops): Add comment.
        (target_ops::info): New.
        (target_ops::shortname, target_ops::longname, target_ops::doc): No
        longer virtual.  Implement in terms of target_info.
        (set_native_target, get_native_target): Declare.
        (target_open_ftype): New.
        (add_target, add_target_with_completer)
        (add_deprecated_target_alias): Change prototype.
        (test_target) <shortname, longname, doc>: Delete.
        <info>: New.
        * tilegx-linux-nat.c (_initialize_tile_linux_nat): Use
        add_inf_child_target.
        * tracefile-tfile.c (tfile_target_info): New.
        (tfile_target) <shortname, longname, doc>: Delete.
        <info>: New.
        (tfile_target::open): Rename to ...
        (tfile_target_open): ... this.
        (_initialize_tracefile_tfile): Adjust.
        * vax-bsd-nat.c (_initialize_vaxbsd_nat): Use
        add_inf_child_target.
        * windows-nat.c (_initialize_windows_nat): Use
        add_inf_child_target.
        * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use
        add_inf_child_target.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * linux-nat.h (linux_nat_target) <low_new_thread,
        low_delete_thread, low_new_fork, low_forget_process,
        low_prepare_to_resume, low_siginfo_fixup, low_status_is_event>:
        New virtual methods.
        (linux_nat_set_new_thread, linux_nat_set_delete_thread)
        (linux_nat_new_fork_ftype, linux_nat_set_new_fork)
        (linux_nat_forget_process_ftype, linux_nat_set_forget_process)
        (linux_nat_forget_process, linux_nat_set_siginfo_fixup)
        (linux_nat_set_prepare_to_resume, linux_nat_set_status_is_event):
        Delete.
        * linux-fork.c (delete_fork): Adjust to call low method.
        * linux-nat.c (linux_nat_new_thread, linux_nat_delete_thread)
        (linux_nat_new_fork, linux_nat_forget_process_hook)
        (linux_nat_prepare_to_resume, linux_nat_siginfo_fixup)
        (linux_nat_status_is_event):
        (linux_nat_target::follow_fork, lwp_free, add_lwp, detach_one_lwp)
        (linux_resume_one_lwp_throw, linux_handle_extended_wait): Adjust
        to call low method.
        (sigtrap_is_event): Rename to ...
        (linux_nat_target::low_status_is_event): ... this.
        (linux_nat_set_status_is_event): Delete.
        (save_stop_reason, linux_nat_wait_1)
        (linux_nat_target::mourn_inferior, siginfo_fixup): Adjust to call
        low methods.
        (linux_nat_set_new_thread, linux_nat_set_delete_thread)
        (linux_nat_set_new_fork, linux_nat_set_forget_process)
        (linux_nat_forget_process, linux_nat_set_siginfo_fixup)
        (linux_nat_set_prepare_to_resume): Delete.
        * aarch64-linux-nat.c: All linux_nat_set_* callbacks converted to
        low virtual methods.
        * amd64-linux-nat.c: Likewise.
        * arm-linux-nat.c: Likewise.
        * i386-linux-nat.c: Likewise.
        * ia64-linux-nat.c: Likewise.
        * mips-linux-nat.c: Likewise.
        * ppc-linux-nat.c: Likewise.
        * s390-linux-nat.c: Likewise.
        * sparc64-linux-nat.c: Likewise.
        * x86-linux-nat.c: Likewise.
        * x86-linux-nat.h: Include "nat/x86-linux.h".
        (x86_linux_nat_target) <low_new_fork, low_forget_process,
        low_prepare_to_resume, low_new_thread, low_delete_thread>:
        Override methods.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * target.h (target_ops)
        <stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
        stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint,
        stopped_by_watchpoint, have_continuable_watchpoint,
        stopped_data_address, watchpoint_addr_within_range,
        can_accel_watchpoint_condition, can_run, thread_alive,
        has_all_memory, has_memory, has_stack, has_registers,
        has_execution, can_async_p, is_async_p, supports_non_stop,
        always_non_stop_p, can_execute_reverse, supports_multi_process,
        supports_enable_disable_tracepoint,
        supports_disable_randomization, supports_string_tracing,
        supports_evaluation_of_breakpoint_conditions,
        can_run_breakpoint_commands, filesystem_is_local,
        can_download_tracepoint, get_trace_state_variable_value,
        set_trace_notes, get_tib_address, use_agent, can_use_agent,
        record_is_replaying, record_will_replay,
        augmented_libraries_svr4_read>: Adjust to return bool.
        * aarch64-linux-nat.c: All implementations adjusted.
        * aix-thread.c: All implementations adjusted.
        * arm-linux-nat.c: All implementations adjusted.
        * breakpoint.c: All implementations adjusted.
        * bsd-kvm.c: All implementations adjusted.
        * bsd-uthread.c: All implementations adjusted.
        * corelow.c: All implementations adjusted.
        * ctf.c: All implementations adjusted.
        * darwin-nat.c: All implementations adjusted.
        * darwin-nat.h: All implementations adjusted.
        * exec.c: All implementations adjusted.
        * fbsd-nat.c: All implementations adjusted.
        * fbsd-nat.h: All implementations adjusted.
        * gnu-nat.c: All implementations adjusted.
        * gnu-nat.h: All implementations adjusted.
        * go32-nat.c: All implementations adjusted.
        * ia64-linux-nat.c: All implementations adjusted.
        * inf-child.c: All implementations adjusted.
        * inf-child.h: All implementations adjusted.
        * inf-ptrace.c: All implementations adjusted.
        * inf-ptrace.h: All implementations adjusted.
        * linux-nat.c: All implementations adjusted.
        * linux-nat.h: All implementations adjusted.
        * mips-linux-nat.c: All implementations adjusted.
        * nto-procfs.c: All implementations adjusted.
        * ppc-linux-nat.c: All implementations adjusted.
        * procfs.c: All implementations adjusted.
        * ravenscar-thread.c: All implementations adjusted.
        * record-btrace.c: All implementations adjusted.
        * record-full.c: All implementations adjusted.
        * remote-sim.c: All implementations adjusted.
        * remote.c: All implementations adjusted.
        * s390-linux-nat.c: All implementations adjusted.
        * sol-thread.c: All implementations adjusted.
        * spu-multiarch.c: All implementations adjusted.
        * target-delegates.c: All implementations adjusted.
        * target.c: All implementations adjusted.
        * target.h: All implementations adjusted.
        * tracefile-tfile.c: All implementations adjusted.
        * tracefile.c: All implementations adjusted.
        * tracefile.h: All implementations adjusted.
        * windows-nat.c: All implementations adjusted.
        * x86-linux-nat.h: All implementations adjusted.
        * x86-nat.h: All implementations adjusted.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * make-target-delegates (scan_target_h): Don't trim lines here.
        Replace sequences of tabs and/or whitespace with a single
        whitespace.
        (top level, parsing methods): Trim each line before processing it
        here.

2018-05-02  Pedro Alves  <palves@redhat.com>
            John Baldwin  <jhb@freebsd.org>

        * target.h (enum strata) <debug_stratum>: New.
        (struct target_ops) <all delegation methods>: Replace by C++
        virtual methods, and drop "to_" prefix.  All references updated
        throughout.
        <to_shortname, to_longname, to_doc, to_data,
        to_have_steppable_watchpoint, to_have_continuable_watchpoint,
        to_has_thread_control, to_attach_no_wait>: Delete, replaced by
        virtual methods.  All references updated throughout.
        <can_attach, supports_terminal_ours, can_create_inferior,
        get_thread_control_capabilities, attach_no_wait>: New
        virtual methods.
        <insert_breakpoint, remove_breakpoint>: Now
        TARGET_DEFAULT_NORETURN methods.
        <info_proc>: Now returns bool.
        <to_magic>: Delete.
        (OPS_MAGIC): Delete.
        (current_target): Delete.  All references replaced by references
        to ...
        (target_stack): ... this.  New.
        (target_shortname, target_longname): Adjust.
        (target_can_run): Now a function declaration.
        (default_child_has_all_memory, default_child_has_memory)
        (default_child_has_stack, default_child_has_registers)
        (default_child_has_execution): Remove target_ops parameter.
        (complete_target_initialization): Delete.
        (memory_breakpoint_target): New template class.
        (test_target_ops): Refactor as a C++ class with virtual methods.
        * make-target-delegates (NAME_PART): Tighten.
        (POINTER_PART, CP_SYMBOL): New.
        (SIMPLE_RETURN_PART): Reimplement.
        (VEC_RETURN_PART): Expect less.
        (RETURN_PART, VIRTUAL_PART): New.
        (METHOD): Adjust to C++ virtual methods.
        (scan_target_h): Remove reference to C99.
        (dname): Output "target_ops::" prefix.
        (write_function_header): Adjust to output a C++ class method.
        (write_declaration): New.
        (write_delegator): Adjust to output a C++ class method.
        (tdname): Output "dummy_target::" prefix.
        (write_tdefault, write_debugmethod): Adjust to output a C++ class
        method.
        (tdefault_names, debug_names): Delete.
        (return_types, tdefaults, styles, argtypes_array): New.
        (top level): All methods are delegators.
        (print_class): New.
        (top level): Print dummy_target and debug_target classes.
        * target-delegates.c: Regenerate.
        * target-debug.h (target_debug_print_enum_info_proc_what)
        (target_debug_print_thread_control_capabilities)
        (target_debug_print_thread_info_p): New.
        * target.c (dummy_target): Delete.
        (the_dummy_target, the_debug_target): New.
        (target_stack): Now extern.
        (set_targetdebug): Push/unpush debug target.
        (default_child_has_all_memory, default_child_has_memory)
        (default_child_has_stack, default_child_has_registers)
        (default_child_has_execution): Remove target_ops parameter.
        (complete_target_initialization): Delete.
        (add_target_with_completer): No longer call
        complete_target_initialization.
        (target_supports_terminal_ours): Use regular delegation.
        (update_current_target): Delete.
        (push_target): No longer check magic number.  Don't call
        update_current_target.
        (unpush_target): Don't call update_current_target.
        (target_is_pushed): No longer check magic number.
        (target_require_runnable): Skip for all stratums over
        process_stratum.
        (target_ops::info_proc): New.
        (target_info_proc): Use find_target_at and
        find_default_run_target.
        (target_supports_disable_randomization): Use regular delegation.
        (target_get_osdata): Use find_target_at.
        (target_ops::open, target_ops::close, target_ops::can_attach)
        (target_ops::attach, target_ops::can_create_inferior)
        (target_ops::create_inferior, target_ops::can_run)
        (target_can_run): New.
        (default_fileio_target): Use regular delegation.
        (target_ops::fileio_open, target_ops::fileio_pwrite)
        (target_ops::fileio_pread, target_ops::fileio_fstat)
        (target_ops::fileio_close, target_ops::fileio_unlink)
        (target_ops::fileio_readlink): New.
        (target_fileio_open_1, target_fileio_unlink)
        (target_fileio_readlink): Always call the target method.  Handle
        FILEIO_ENOSYS.
        (return_zero, return_zero_has_execution): Delete.
        (init_dummy_target): Delete.
        (dummy_target::dummy_target, dummy_target::shortname)
        (dummy_target::longname, dummy_target::doc)
        (debug_target::debug_target, debug_target::shortname)
        (debug_target::longname, debug_target::doc): New.
        (target_supports_delete_record): Use regular delegation.
        (setup_target_debug): Delete.
        (maintenance_print_target_stack): Skip debug_stratum.
        (initialize_targets): Instantiate the_dummy_target and
        the_debug_target.
        * auxv.c (target_auxv_parse): Remove 'ops' parameter.  Adjust to
        use target_stack.
        (target_auxv_search, fprint_target_auxv): Adjust.
        (info_auxv_command): Adjust to use target_stack.
        * auxv.h (target_auxv_parse): Remove 'ops' parameter.
        * exceptions.c (print_flush): Handle a NULL target_stack.
        * regcache.c (target_ops_no_register): Refactor as class with
        virtual methods.

        * exec.c (exec_target): New class.
        (exec_ops): Now an exec_target.
        (exec_open, exec_close_1, exec_get_section_table)
        (exec_xfer_partial, exec_files_info, exec_has_memory)
        (exec_make_note_section): Refactor as exec_target methods.
        (exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
        Delete.
        (exec_target::find_memory_regions): New.
        (_initialize_exec): Don't call init_exec_ops.
        * gdbcore.h (exec_file_clear): Delete.

        * corefile.c (core_target): Delete.
        (core_file_command): Adjust.
        * corelow.c (core_target): New class.
        (the_core_target): New.
        (core_close): Remove target_ops parameter.
        (core_close_cleanup): Adjust.
        (core_target::close): New.
        (core_open, core_detach, get_core_registers, core_files_info)
        (core_xfer_partial, core_thread_alive, core_read_description)
        (core_pid_to_str, core_thread_name, core_has_memory)
        (core_has_stack, core_has_registers, core_info_proc): Rework as
        core_target methods.
        (ignore, core_remove_breakpoint, init_core_ops): Delete.
        (_initialize_corelow): Initialize the_core_target.
        * gdbcore.h (core_target): Delete.
        (the_core_target): New.

        * ctf.c: (ctf_target): New class.
        (ctf_ops): Now a ctf_target.
        (ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
        (ctf_xfer_partial, ctf_get_trace_state_variable_value)
        (ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
        methods.
        (init_ctf_ops): Delete.
        (_initialize_ctf): Don't call it.
        * tracefile-tfile.c (tfile_target): New class.
        (tfile_ops): Now a tfile_target.
        (tfile_open, tfile_close, tfile_files_info)
        (tfile_get_tracepoint_status, tfile_trace_find)
        (tfile_fetch_registers, tfile_xfer_partial)
        (tfile_get_trace_state_variable_value, tfile_traceframe_info):
        Refactor as tfile_target methods.
        (tfile_xfer_partial_features): Remove target_ops parameter.
        (init_tfile_ops): Delete.
        (_initialize_tracefile_tfile): Don't call it.
        * tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
        (tracefile_has_stack, tracefile_has_registers)
        (tracefile_thread_alive, tracefile_get_trace_status): Refactor as
        tracefile_target methods.
        (init_tracefile_ops): Delete.
        (tracefile_target::tracefile_target): New.
        * tracefile.h: Include "target.h".
        (tracefile_target): New class.
        (init_tracefile_ops): Delete.

        * spu-multiarch.c (spu_multiarch_target): New class.
        (spu_ops): Now a spu_multiarch_target.
        (spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
        (spu_fetch_registers, spu_store_registers, spu_xfer_partial)
        (spu_search_memory, spu_mourn_inferior): Refactor as
        spu_multiarch_target methods.
        (init_spu_ops): Delete.
        (_initialize_spu_multiarch): Remove references to init_spu_ops,
        complete_target_initialization.

        * ravenscar-thread.c (ravenscar_thread_target): New class.
        (ravenscar_ops): Now a ravenscar_thread_target.
        (ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
        (ravenscar_thread_alive, ravenscar_pid_to_str)
        (ravenscar_fetch_registers, ravenscar_store_registers)
        (ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
        (ravenscar_stopped_by_hw_breakpoint)
        (ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
        (ravenscar_mourn_inferior, ravenscar_core_of_thread)
        (ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
        methods.
        (init_ravenscar_thread_ops): Delete.
        (_initialize_ravenscar): Remove references to
        init_ravenscar_thread_ops and complete_target_initialization.

        * bsd-uthread.c (bsd_uthread_ops_hack): Delete.
        (bsd_uthread_target): New class.
        (bsd_uthread_ops): Now a bsd_uthread_target.
        (bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
        (bsd_uthread_close, bsd_uthread_mourn_inferior)
        (bsd_uthread_fetch_registers, bsd_uthread_store_registers)
        (bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
        (bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
        (bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
        (bsd_uthread_target): Delete function.
        (_initialize_bsd_uthread): Remove reference to
        complete_target_initialization.

        * bfd-target.c (target_bfd_data): Delete.  Fields folded into ...
        (target_bfd): ... this new class.
        (target_bfd_xfer_partial, target_bfd_get_section_table)
        (target_bfd_close): Refactor as target_bfd methods.
        (target_bfd::~target_bfd): New.
        (target_bfd_reopen): Adjust.
        (target_bfd::close): New.

        * record-btrace.c (record_btrace_target): New class.
        (record_btrace_ops): Now a record_btrace_target.
        (record_btrace_open, record_btrace_stop_recording)
        (record_btrace_disconnect, record_btrace_close)
        (record_btrace_async, record_btrace_info)
        (record_btrace_insn_history, record_btrace_insn_history_range)
        (record_btrace_insn_history_from, record_btrace_call_history)
        (record_btrace_call_history_range)
        (record_btrace_call_history_from, record_btrace_record_method)
        (record_btrace_is_replaying, record_btrace_will_replay)
        (record_btrace_xfer_partial, record_btrace_insert_breakpoint)
        (record_btrace_remove_breakpoint, record_btrace_fetch_registers)
        (record_btrace_store_registers, record_btrace_prepare_to_store)
        (record_btrace_to_get_unwinder)
        (record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
        (record_btrace_commit_resume, record_btrace_wait)
        (record_btrace_stop, record_btrace_can_execute_reverse)
        (record_btrace_stopped_by_sw_breakpoint)
        (record_btrace_supports_stopped_by_sw_breakpoint)
        (record_btrace_stopped_by_hw_breakpoint)
        (record_btrace_supports_stopped_by_hw_breakpoint)
        (record_btrace_update_thread_list, record_btrace_thread_alive)
        (record_btrace_goto_begin, record_btrace_goto_end)
        (record_btrace_goto, record_btrace_stop_replaying_all)
        (record_btrace_execution_direction)
        (record_btrace_prepare_to_generate_core)
        (record_btrace_done_generating_core): Refactor as
        record_btrace_target methods.
        (init_record_btrace_ops): Delete.
        (_initialize_record_btrace): Remove reference to
        init_record_btrace_ops.
        * record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
        the execution_direction global.
        (record_full_base_target, record_full_target)
        (record_full_core_target): New classes.
        (record_full_ops): Now a record_full_target.
        (record_full_core_ops): Now a record_full_core_target.
        (record_full_target::detach, record_full_target::disconnect)
        (record_full_core_target::disconnect)
        (record_full_target::mourn_inferior, record_full_target::kill):
        New.
        (record_full_open, record_full_close, record_full_async): Refactor
        as methods of the record_full_base_target class.
        (record_full_resume, record_full_commit_resume): Refactor
        as methods of the record_full_target class.
        (record_full_wait, record_full_stopped_by_watchpoint)
        (record_full_stopped_data_address)
        (record_full_stopped_by_sw_breakpoint)
        (record_full_supports_stopped_by_sw_breakpoint)
        (record_full_stopped_by_hw_breakpoint)
        (record_full_supports_stopped_by_hw_breakpoint): Refactor as
        methods of the record_full_base_target class.
        (record_full_store_registers, record_full_xfer_partial)
        (record_full_insert_breakpoint, record_full_remove_breakpoint):
        Refactor as methods of the record_full_target class.
        (record_full_can_execute_reverse, record_full_get_bookmark)
        (record_full_goto_bookmark, record_full_execution_direction)
        (record_full_record_method, record_full_info, record_full_delete)
        (record_full_is_replaying, record_full_will_replay)
        (record_full_goto_begin, record_full_goto_end, record_full_goto)
        (record_full_stop_replaying): Refactor as methods of the
        record_full_base_target class.
        (record_full_core_resume, record_full_core_kill)
        (record_full_core_fetch_registers)
        (record_full_core_prepare_to_store)
        (record_full_core_store_registers, record_full_core_xfer_partial)
        (record_full_core_insert_breakpoint)
        (record_full_core_remove_breakpoint)
        (record_full_core_has_execution): Refactor
        as methods of the record_full_core_target class.
        (record_full_base_target::supports_delete_record): New.
        (init_record_full_ops): Delete.
        (init_record_full_core_ops): Delete.
        (record_full_save): Refactor as method of the
        record_full_base_target class.
        (_initialize_record_full): Remove references to
        init_record_full_ops and init_record_full_core_ops.

        * remote.c (remote_target, extended_remote_target): New classes.
        (remote_ops): Now a remote_target.
        (extended_remote_ops): Now an extended_remote_target.
        (remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
        (remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
        (remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
        (remote_pass_signals, remote_set_syscall_catchpoint)
        (remote_program_signals, )
        (remote_thread_always_alive): Remove target_ops parameter.
        (remote_thread_alive, remote_thread_name)
        (remote_update_thread_list, remote_threads_extra_info)
        (remote_static_tracepoint_marker_at)
        (remote_static_tracepoint_markers_by_strid)
        (remote_get_ada_task_ptid, remote_close, remote_start_remote)
        (remote_open): Refactor as methods of remote_target.
        (extended_remote_open, extended_remote_detach)
        (extended_remote_attach, extended_remote_post_attach):
        (extended_remote_supports_disable_randomization)
        (extended_remote_create_inferior): : Refactor as method of
        extended_remote_target.
        (remote_set_permissions, remote_open_1, remote_detach)
        (remote_follow_fork, remote_follow_exec, remote_disconnect)
        (remote_resume, remote_commit_resume, remote_stop)
        (remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
        (remote_terminal_ours, remote_wait, remote_fetch_registers)
        (remote_prepare_to_store, remote_store_registers)
        (remote_flash_erase, remote_flash_done, remote_files_info)
        (remote_kill, remote_mourn, remote_insert_breakpoint)
        (remote_remove_breakpoint, remote_insert_watchpoint)
        (remote_watchpoint_addr_within_range)
        (remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
        (remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
        (remote_supports_stopped_by_sw_breakpoint)
        (remote_stopped_by_hw_breakpoint)
        (remote_supports_stopped_by_hw_breakpoint)
        (remote_stopped_by_watchpoint, remote_stopped_data_address)
        (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
        (remote_verify_memory): Refactor as methods of remote_target.
        (remote_write_qxfer, remote_read_qxfer): Remove target_ops
        parameter.
        (remote_xfer_partial, remote_get_memory_xfer_limit)
        (remote_search_memory, remote_rcmd, remote_memory_map)
        (remote_pid_to_str, remote_get_thread_local_address)
        (remote_get_tib_address, remote_read_description): Refactor as
        methods of remote_target.
        (remote_target::fileio_open, remote_target::fileio_pwrite)
        (remote_target::fileio_pread, remote_target::fileio_close): New.
        (remote_hostio_readlink, remote_hostio_fstat)
        (remote_filesystem_is_local, remote_can_execute_reverse)
        (remote_supports_non_stop, remote_supports_disable_randomization)
        (remote_supports_multi_process, remote_supports_cond_breakpoints)
        (remote_supports_enable_disable_tracepoint)
        (remote_supports_string_tracing)
        (remote_can_run_breakpoint_commands, remote_trace_init)
        (remote_download_tracepoint, remote_can_download_tracepoint)
        (remote_download_trace_state_variable, remote_enable_tracepoint)
        (remote_disable_tracepoint, remote_trace_set_readonly_regions)
        (remote_trace_start, remote_get_trace_status)
        (remote_get_tracepoint_status, remote_trace_stop)
        (remote_trace_find, remote_get_trace_state_variable_value)
        (remote_save_trace_data, remote_get_raw_trace_data)
        (remote_set_disconnected_tracing, remote_core_of_thread)
        (remote_set_circular_trace_buffer, remote_traceframe_info)
        (remote_get_min_fast_tracepoint_insn_len)
        (remote_set_trace_buffer_size, remote_set_trace_notes)
        (remote_use_agent, remote_can_use_agent, remote_enable_btrace)
        (remote_disable_btrace, remote_teardown_btrace)
        (remote_read_btrace, remote_btrace_conf)
        (remote_augmented_libraries_svr4_read, remote_load)
        (remote_pid_to_exec_file, remote_can_do_single_step)
        (remote_execution_direction, remote_thread_handle_to_thread_info):
        Refactor as methods of remote_target.
        (init_remote_ops, init_extended_remote_ops): Delete.
        (remote_can_async_p, remote_is_async_p, remote_async)
        (remote_thread_events, remote_upload_tracepoints)
        (remote_upload_trace_state_variables): Refactor as methods of
        remote_target.
        (_initialize_remote): Remove references to init_remote_ops and
        init_extended_remote_ops.

        * remote-sim.c (gdbsim_target): New class.
        (gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
        (gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
        (gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
        (gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
        (gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
        (gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
        Refactor as methods of gdbsim_target.
        (gdbsim_ops): Now a gdbsim_target.
        (init_gdbsim_ops): Delete.
        (gdbsim_cntrl_c): Adjust.
        (_initialize_remote_sim): Remove reference to init_gdbsim_ops.

        * amd64-linux-nat.c (amd64_linux_nat_target): New class.
        (the_amd64_linux_nat_target): New.
        (amd64_linux_fetch_inferior_registers)
        (amd64_linux_store_inferior_registers): Refactor as methods of
        amd64_linux_nat_target.
        (_initialize_amd64_linux_nat): Adjust.  Set linux_target.
        * i386-linux-nat.c: Don't include "linux-nat.h".
        (i386_linux_nat_target): New class.
        (the_i386_linux_nat_target): New.
        (i386_linux_fetch_inferior_registers)
        (i386_linux_store_inferior_registers, i386_linux_resume): Refactor
        as methods of i386_linux_nat_target.
        (_initialize_i386_linux_nat): Adjust.  Set linux_target.
        * inf-child.c (inf_child_ops): Delete.
        (inf_child_fetch_inferior_registers)
        (inf_child_store_inferior_registers): Delete.
        (inf_child_post_attach, inf_child_prepare_to_store): Refactor as
        methods of inf_child_target.
        (inf_child_target::supports_terminal_ours)
        (inf_child_target::terminal_init)
        (inf_child_target::terminal_inferior)
        (inf_child_target::terminal_ours_for_output)
        (inf_child_target::terminal_ours, inf_child_target::interrupt)
        (inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
        New.
        (inf_child_open, inf_child_disconnect, inf_child_close)
        (inf_child_mourn_inferior, inf_child_maybe_unpush_target)
        (inf_child_post_startup_inferior, inf_child_can_run)
        (inf_child_pid_to_exec_file): Refactor as methods of
        inf_child_target.
        (inf_child_follow_fork): Delete.
        (inf_child_target::can_create_inferior)
        (inf_child_target::can_attach): New.
        (inf_child_target::has_all_memory, inf_child_target::has_memory)
        (inf_child_target::has_stack, inf_child_target::has_registers)
        (inf_child_target::has_execution): New.
        (inf_child_fileio_open, inf_child_fileio_pwrite)
        (inf_child_fileio_pread, inf_child_fileio_fstat)
        (inf_child_fileio_close, inf_child_fileio_unlink)
        (inf_child_fileio_readlink, inf_child_use_agent)
        (inf_child_can_use_agent): Refactor as methods of
        inf_child_target.
        (return_zero, inf_child_target): Delete.
        (inf_child_target::inf_child_target): New.
        * inf-child.h: Include "target.h".
        (inf_child_target): Delete function prototype.
        (inf_child_target): New class.
        (inf_child_open_target, inf_child_mourn_inferior)
        (inf_child_maybe_unpush_target): Delete.
        * inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
        (inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
        (inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
        (inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
        (inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
        (inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
        (inf_ptrace_wait, inf_ptrace_xfer_partial)
        (inf_ptrace_thread_alive, inf_ptrace_files_info)
        (inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
        methods of inf_ptrace_target.
        (inf_ptrace_target): Delete function.
        * inf-ptrace.h: Include "inf-child.h".
        (inf_ptrace_target): Delete function declaration.
        (inf_ptrace_target): New class.
        (inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
        * linux-nat.c (linux_target): New.
        (linux_ops, linux_ops_saved, super_xfer_partial): Delete.
        (linux_nat_target::~linux_nat_target): New.
        (linux_child_post_attach, linux_child_post_startup_inferior)
        (linux_child_follow_fork, linux_child_insert_fork_catchpoint)
        (linux_child_remove_fork_catchpoint)
        (linux_child_insert_vfork_catchpoint)
        (linux_child_remove_vfork_catchpoint)
        (linux_child_insert_exec_catchpoint)
        (linux_child_remove_exec_catchpoint)
        (linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
        (linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
        (linux_nat_resume, linux_nat_stopped_by_watchpoint)
        (linux_nat_stopped_data_address)
        (linux_nat_stopped_by_sw_breakpoint)
        (linux_nat_supports_stopped_by_sw_breakpoint)
        (linux_nat_stopped_by_hw_breakpoint)
        (linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
        (linux_nat_kill, linux_nat_mourn_inferior)
        (linux_nat_xfer_partial, linux_nat_thread_alive)
        (linux_nat_update_thread_list, linux_nat_pid_to_str)
        (linux_nat_thread_name, linux_child_pid_to_exec_file)
        (linux_child_static_tracepoint_markers_by_strid)
        (linux_nat_is_async_p, linux_nat_can_async_p)
        (linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
        (linux_nat_supports_multi_process)
        (linux_nat_supports_disable_randomization, linux_nat_async)
        (linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
        (linux_nat_core_of_thread, linux_nat_filesystem_is_local)
        (linux_nat_fileio_open, linux_nat_fileio_readlink)
        (linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
        methods of linux_nat_target.
        (linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
        (linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
        parameter.
        (check_stopped_by_watchpoint): Adjust.
        (linux_xfer_partial): Delete.
        (linux_target_install_ops, linux_target, linux_nat_add_target):
        Delete.
        (linux_nat_target::linux_nat_target): New.
        * linux-nat.h: Include "inf-ptrace.h".
        (linux_nat_target): New.
        (linux_target, linux_target_install_ops, linux_nat_add_target):
        Delete function declarations.
        (linux_target): Declare global.
        * linux-thread-db.c (thread_db_target): New.
        (thread_db_target::thread_db_target): New.
        (thread_db_ops): Delete.
        (the_thread_db_target): New.
        (thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
        (thread_db_update_thread_list, thread_db_pid_to_str)
        (thread_db_extra_thread_info)
        (thread_db_thread_handle_to_thread_info)
        (thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
        (thread_db_resume): Refactor as methods of thread_db_target.
        (init_thread_db_ops): Delete.
        (_initialize_thread_db): Remove reference to init_thread_db_ops.
        * x86-linux-nat.c: Don't include "linux-nat.h".
        (super_post_startup_inferior): Delete.
        (x86_linux_nat_target::~x86_linux_nat_target): New.
        (x86_linux_child_post_startup_inferior)
        (x86_linux_read_description, x86_linux_enable_btrace)
        (x86_linux_disable_btrace, x86_linux_teardown_btrace)
        (x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
        methods of x86_linux_nat_target.
        (x86_linux_create_target): Delete.  Bits folded ...
        (x86_linux_add_target): ... here.  Now takes a linux_nat_target
        pointer.
        * x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
        (x86_linux_nat_target): New class.
        (x86_linux_create_target): Delete.
        (x86_linux_add_target): Now takes a linux_nat_target pointer.
        * x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
        (x86_region_ok_for_watchpoint, x86_stopped_data_address)
        (x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
        (x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
        (x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
        make extern.
        (x86_use_watchpoints): Delete.
        * x86-nat.h: Include "breakpoint.h" and "target.h".
        (x86_use_watchpoints): Delete.
        (x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
        (x86_stopped_by_watchpoint, x86_stopped_data_address)
        (x86_insert_watchpoint, x86_remove_watchpoint)
        (x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
        (x86_stopped_by_hw_breakpoint): New declarations.
        (x86_nat_target): New template class.

        * ppc-linux-nat.c (ppc_linux_nat_target): New class.
        (the_ppc_linux_nat_target): New.
        (ppc_linux_fetch_inferior_registers)
        (ppc_linux_can_use_hw_breakpoint)
        (ppc_linux_region_ok_for_hw_watchpoint)
        (ppc_linux_ranged_break_num_registers)
        (ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
        (ppc_linux_insert_mask_watchpoint)
        (ppc_linux_remove_mask_watchpoint)
        (ppc_linux_can_accel_watchpoint_condition)
        (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
        (ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
        (ppc_linux_watchpoint_addr_within_range)
        (ppc_linux_masked_watch_num_registers)
        (ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
        (ppc_linux_read_description): Refactor as methods of
        ppc_linux_nat_target.
        (_initialize_ppc_linux_nat): Adjust.  Set linux_target.

        * procfs.c (procfs_xfer_partial): Delete forward declaration.
        (procfs_target): New class.
        (the_procfs_target): New.
        (procfs_target): Delete function.
        (procfs_auxv_parse, procfs_attach, procfs_detach)
        (procfs_fetch_registers, procfs_store_registers, procfs_wait)
        (procfs_xfer_partial, procfs_resume, procfs_pass_signals)
        (procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
        (procfs_create_inferior, procfs_update_thread_list)
        (procfs_thread_alive, procfs_pid_to_str)
        (procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
        (procfs_stopped_data_address, procfs_insert_watchpoint)
        (procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
        (proc_find_memory_regions, procfs_info_proc)
        (procfs_make_note_section): Refactor as methods of procfs_target.
        (_initialize_procfs): Adjust.
        * sol-thread.c (sol_thread_target): New class.
        (sol_thread_ops): Now a sol_thread_target.
        (sol_thread_detach, sol_thread_resume, sol_thread_wait)
        (sol_thread_fetch_registers, sol_thread_store_registers)
        (sol_thread_xfer_partial, sol_thread_mourn_inferior)
        (sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
        (sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
        (init_sol_thread_ops): Delete.
        (_initialize_sol_thread): Adjust.  Remove references to
        init_sol_thread_ops and complete_target_initialization.

        * windows-nat.c (windows_nat_target): New class.
        (windows_fetch_inferior_registers)
        (windows_store_inferior_registers, windows_resume, windows_wait)
        (windows_attach, windows_detach, windows_pid_to_exec_file)
        (windows_files_info, windows_create_inferior)
        (windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
        (windows_close, windows_pid_to_str, windows_xfer_partial)
        (windows_get_tib_address, windows_get_ada_task_ptid)
        (windows_thread_name, windows_thread_alive): Refactor as
        windows_nat_target methods.
        (do_initial_windows_stuff): Adjust.
        (windows_target): Delete function.
        (_initialize_windows_nat): Adjust.

        * darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
        (darwin_mourn_inferior, darwin_kill_inferior)
        (darwin_create_inferior, darwin_attach, darwin_detach)
        (darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
        (darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
        (darwin_supports_multi_process): Refactor as darwin_nat_target
        methods.
        (darwin_resume_to, darwin_files_info): Delete.
        (_initialize_darwin_inferior): Rename to ...
        (_initialize_darwin_nat): ... this.  Adjust to C++ification.
        * darwin-nat.h: Include "inf-child.h".
        (darwin_nat_target): New class.
        (darwin_complete_target): Delete.
        * i386-darwin-nat.c (i386_darwin_nat_target): New class.
        (darwin_target): New.
        (i386_darwin_fetch_inferior_registers)
        (i386_darwin_store_inferior_registers): Refactor as methods of
        darwin_nat_target.
        (darwin_complete_target): Delete, with ...
        (_initialize_i386_darwin_nat): ... bits factored out here.

        * alpha-linux-nat.c (alpha_linux_nat_target): New class.
        (the_alpha_linux_nat_target): New.
        (alpha_linux_register_u_offset): Refactor as
        alpha_linux_nat_target method.
        (_initialize_alpha_linux_nat): Adjust.
        * linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
        (inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
        (inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
        methods of linux_nat_trad_target.
        (linux_trad_target): Delete.
        * linux-nat-trad.h (linux_trad_target): Delete function.
        (linux_nat_trad_target): New class.
        * mips-linux-nat.c (mips_linux_nat_target): New class.
        (super_fetch_registers, super_store_registers, super_close):
        Delete.
        (the_mips_linux_nat_target): New.
        (mips64_linux_regsets_fetch_registers)
        (mips64_linux_regsets_store_registers)
        (mips64_linux_fetch_registers, mips64_linux_store_registers)
        (mips_linux_register_u_offset, mips_linux_read_description)
        (mips_linux_can_use_hw_breakpoint)
        (mips_linux_stopped_by_watchpoint)
        (mips_linux_stopped_data_address)
        (mips_linux_region_ok_for_hw_watchpoint)
        (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
        (mips_linux_close): Refactor as methods of mips_linux_nat.
        (_initialize_mips_linux_nat): Adjust to C++ification.

        * aix-thread.c (aix_thread_target): New class.
        (aix_thread_ops): Now an aix_thread_target.
        (aix_thread_detach, aix_thread_resume, aix_thread_wait)
        (aix_thread_fetch_registers, aix_thread_store_registers)
        (aix_thread_xfer_partial, aix_thread_mourn_inferior)
        (aix_thread_thread_alive, aix_thread_pid_to_str)
        (aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
        Refactor as methods of aix_thread_target.
        (init_aix_thread_ops): Delete.
        (_initialize_aix_thread): Remove references to init_aix_thread_ops
        and complete_target_initialization.
        * rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
        (rs6000_nat_target): New class.
        (the_rs6000_nat_target): New.
        (rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
        (rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
        (rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
        (super_create_inferior): Delete.
        (_initialize_rs6000_nat): Adjust to C++ification.

        * arm-linux-nat.c (arm_linux_nat_target): New class.
        (the_arm_linux_nat_target): New.
        (arm_linux_fetch_inferior_registers)
        (arm_linux_store_inferior_registers, arm_linux_read_description)
        (arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
        (arm_linux_remove_hw_breakpoint)
        (arm_linux_region_ok_for_hw_watchpoint)
        (arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
        (arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
        (arm_linux_watchpoint_addr_within_range): Refactor as methods of
        arm_linux_nat_target.
        (_initialize_arm_linux_nat): Adjust to C++ification.

        * aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
        (the_aarch64_linux_nat_target): New.
        (aarch64_linux_fetch_inferior_registers)
        (aarch64_linux_store_inferior_registers)
        (aarch64_linux_child_post_startup_inferior)
        (aarch64_linux_read_description)
        (aarch64_linux_can_use_hw_breakpoint)
        (aarch64_linux_insert_hw_breakpoint)
        (aarch64_linux_remove_hw_breakpoint)
        (aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
        (aarch64_linux_region_ok_for_hw_watchpoint)
        (aarch64_linux_stopped_data_address)
        (aarch64_linux_stopped_by_watchpoint)
        (aarch64_linux_watchpoint_addr_within_range)
        (aarch64_linux_can_do_single_step): Refactor as methods of
        aarch64_linux_nat_target.
        (super_post_startup_inferior): Delete.
        (_initialize_aarch64_linux_nat): Adjust to C++ification.

        * hppa-linux-nat.c (hppa_linux_nat_target): New class.
        (the_hppa_linux_nat_target): New.
        (hppa_linux_fetch_inferior_registers)
        (hppa_linux_store_inferior_registers): Refactor as methods of
        hppa_linux_nat_target.
        (_initialize_hppa_linux_nat): Adjust to C++ification.

        * ia64-linux-nat.c (ia64_linux_nat_target): New class.
        (the_ia64_linux_nat_target): New.
        (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
        (ia64_linux_stopped_data_address)
        (ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
        (ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
        ia64_linux_nat_target methods.
        (super_xfer_partial): Delete.
        (_initialize_ia64_linux_nat): Adjust to C++ification.

        * m32r-linux-nat.c (m32r_linux_nat_target): New class.
        (the_m32r_linux_nat_target): New.
        (m32r_linux_fetch_inferior_registers)
        (m32r_linux_store_inferior_registers): Refactor as
        m32r_linux_nat_target methods.
        (_initialize_m32r_linux_nat): Adjust to C++ification.

        * m68k-linux-nat.c (m68k_linux_nat_target): New class.
        (the_m68k_linux_nat_target): New.
        (m68k_linux_fetch_inferior_registers)
        (m68k_linux_store_inferior_registers): Refactor as
        m68k_linux_nat_target methods.
        (_initialize_m68k_linux_nat): Adjust to C++ification.

        * s390-linux-nat.c (s390_linux_nat_target): New class.
        (the_s390_linux_nat_target): New.
        (s390_linux_fetch_inferior_registers)
        (s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
        (s390_insert_watchpoint, s390_remove_watchpoint)
        (s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
        (s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
        (s390_auxv_parse, s390_read_description): Refactor as methods of
        s390_linux_nat_target.
        (_initialize_s390_nat): Adjust to C++ification.

        * sparc-linux-nat.c (sparc_linux_nat_target): New class.
        (the_sparc_linux_nat_target): New.
        (_initialize_sparc_linux_nat): Adjust to C++ification.
        * sparc-nat.c (sparc_fetch_inferior_registers)
        (sparc_store_inferior_registers): Remove target_ops parameter.
        * sparc-nat.h (sparc_fetch_inferior_registers)
        (sparc_store_inferior_registers): Remove target_ops parameter.
        * sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
        (the_sparc64_linux_nat_target): New.
        (_initialize_sparc64_linux_nat): Adjust to C++ification.

        * spu-linux-nat.c (spu_linux_nat_target): New class.
        (the_spu_linux_nat_target): New.
        (spu_child_post_startup_inferior, spu_child_post_attach)
        (spu_child_wait, spu_fetch_inferior_registers)
        (spu_store_inferior_registers, spu_xfer_partial)
        (spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
        methods.
        (_initialize_spu_nat): Adjust to C++ification.

        * tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
        (the_tilegx_linux_nat_target): New.
        (fetch_inferior_registers, store_inferior_registers):
        Refactor as methods.
        (_initialize_tile_linux_nat): Adjust to C++ification.

        * xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
        (the_xtensa_linux_nat_target): New.
        (xtensa_linux_fetch_inferior_registers)
        (xtensa_linux_store_inferior_registers): Refactor as
        xtensa_linux_nat_target methods.
        (_initialize_xtensa_linux_nat): Adjust to C++ification.

        * fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
        (fbsd_pid_to_exec_file, fbsd_find_memory_regions)
        (fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
        (fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
        (fbsd_update_thread_list, fbsd_resume, fbsd_wait)
        (fbsd_stopped_by_sw_breakpoint)
        (fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
        (fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
        (fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
        (fbsd_post_startup_inferior, fbsd_post_attach)
        (fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
        (fbsd_set_syscall_catchpoint)
        (super_xfer_partial, super_resume, super_wait)
        (fbsd_supports_stopped_by_hw_breakpoint): Delete.
        (fbsd_handle_debug_trap): Remove target_ops parameter.
        (fbsd_nat_add_target): Delete.
        * fbsd-nat.h: Include "inf-ptrace.h".
        (fbsd_nat_add_target): Delete.
        (USE_SIGTRAP_SIGINFO): Define.
        (fbsd_nat_target): New class.

        * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
        (amd64bsd_store_inferior_registers): Remove target_ops parameter.
        (amd64bsd_target): Delete.
        * amd64-bsd-nat.h: New file.
        * amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
        "x86-bsd-nat.h".
        (amd64_fbsd_nat_target): New class.
        (the_amd64_fbsd_nat_target): New.
        (amd64fbsd_read_description): Refactor as method of
        amd64_fbsd_nat_target.
        (amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
        (_initialize_amd64fbsd_nat): Adjust to C++ification.
        * amd64-nat.h (amd64bsd_target): Delete function declaration.
        * i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
        (i386bsd_store_inferior_registers): Remove target_ops parameter.
        (i386bsd_target): Delete.
        * i386-bsd-nat.h (i386bsd_target): Delete function declaration.
        (i386bsd_fetch_inferior_registers)
        (i386bsd_store_inferior_registers): Declare.
        (i386_bsd_nat_target): New class.
        * i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
        (the_i386_fbsd_nat_target): New.
        (i386fbsd_resume, i386fbsd_read_description): Refactor as
        i386_fbsd_nat_target methods.
        (i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
        (_initialize_i386fbsd_nat): Adjust to C++ification.
        * x86-bsd-nat.c (super_mourn_inferior): Delete.
        (x86bsd_mourn_inferior, x86bsd_target): Delete.
        (_initialize_x86_bsd_nat): Adjust to C++ification.
        * x86-bsd-nat.h: Include "x86-nat.h".
        (x86bsd_target): Delete declaration.
        (x86bsd_nat_target): New class.

        * aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
        (the_aarch64_fbsd_nat_target): New.
        (aarch64_fbsd_fetch_inferior_registers)
        (aarch64_fbsd_store_inferior_registers): Refactor as methods of
        aarch64_fbsd_nat_target.
        (_initialize_aarch64_fbsd_nat): Adjust to C++ification.
        * alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
        (the_alpha_bsd_nat_target): New.
        (alphabsd_fetch_inferior_registers)
        (alphabsd_store_inferior_registers): Refactor as
        alpha_bsd_nat_target methods.
        (_initialize_alphabsd_nat): Refactor as methods of
        alpha_bsd_nat_target.
        * amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
        (the_amd64_nbsd_nat_target): New.
        (_initialize_amd64nbsd_nat): Adjust to C++ification.
        * amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
        (the_amd64_obsd_nat_target): New.
        (_initialize_amd64obsd_nat): Adjust to C++ification.
        * arm-fbsd-nat.c (arm_fbsd_nat_target): New.
        (the_arm_fbsd_nat_target): New.
        (arm_fbsd_fetch_inferior_registers)
        (arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
        (_initialize_arm_fbsd_nat): Refactor as methods of
        arm_fbsd_nat_target.
        (_initialize_arm_fbsd_nat): Adjust to C++ification.
        * arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
        (the_arm_netbsd_nat_target): New.
        (armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
        arm_netbsd_nat_target.
        (_initialize_arm_netbsd_nat): Adjust to C++ification.
        * hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
        (the_hppa_nbsd_nat_target): New.
        (hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
        hppa_nbsd_nat_target methods.
        (_initialize_hppanbsd_nat): Adjust to C++ification.
        * hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
        (the_hppa_obsd_nat_target): New.
        (hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
        methods of hppa_obsd_nat_target.
        (_initialize_hppaobsd_nat): Adjust to C++ification.  Use
        add_target.
        * i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
        (_initialize_i386nbsd_nat): Adjust to C++ification.  Use
        add_target.
        * i386-obsd-nat.c (the_i386_obsd_nat_target): New.
        (_initialize_i386obsd_nat): Use add_target.
        * m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
        (the_m68k_bsd_nat_target): New.
        (m68kbsd_fetch_inferior_registers)
        (m68kbsd_store_inferior_registers): Refactor as methods of
        m68k_bsd_nat_target.
        (_initialize_m68kbsd_nat): Adjust to C++ification.
        * mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
        (the_mips_fbsd_nat_target): New.
        (mips_fbsd_fetch_inferior_registers)
        (mips_fbsd_store_inferior_registers): Refactor as methods of
        mips_fbsd_nat_target.
        (_initialize_mips_fbsd_nat): Adjust to C++ification.  Use
        add_target.
        * mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
        (the_mips_nbsd_nat_target): New.
        (mipsnbsd_fetch_inferior_registers)
        (mipsnbsd_store_inferior_registers): Refactor as methods of
        mips_nbsd_nat_target.
        (_initialize_mipsnbsd_nat): Adjust to C++ification.
        * mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
        (the_mips64_obsd_nat_target): New.
        (mips64obsd_fetch_inferior_registers)
        (mips64obsd_store_inferior_registers): Refactor as methods of
        mips64_obsd_nat_target.
        (_initialize_mips64obsd_nat): Adjust to C++ification.  Use
        add_target.
        * nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
        nbsd_nat_target.
        * nbsd-nat.h: Include "inf-ptrace.h".
        (nbsd_nat_target): New class.
        * obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
        (obsd_wait): Refactor as methods of obsd_nat_target.
        (obsd_add_target): Delete.
        * obsd-nat.h: Include "inf-ptrace.h".
        (obsd_nat_target): New class.
        * ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
        (the_ppc_fbsd_nat_target): New.
        (ppcfbsd_fetch_inferior_registers)
        (ppcfbsd_store_inferior_registers): Refactor as methods of
        ppc_fbsd_nat_target.
        (_initialize_ppcfbsd_nat): Adjust to C++ification.  Use
        add_target.
        * ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
        (the_ppc_nbsd_nat_target): New.
        (ppcnbsd_fetch_inferior_registers)
        (ppcnbsd_store_inferior_registers): Refactor as methods of
        ppc_nbsd_nat_target.
        (_initialize_ppcnbsd_nat): Adjust to C++ification.
        * ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
        (the_ppc_obsd_nat_target): New.
        (ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
        methods of ppc_obsd_nat_target.
        (_initialize_ppcobsd_nat): Adjust to C++ification.  Use
        add_target.
        * sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
        (the_sh_nbsd_nat_target): New.
        (shnbsd_fetch_inferior_registers)
        (shnbsd_store_inferior_registers): Refactor as methods of
        sh_nbsd_nat_target.
        (_initialize_shnbsd_nat): Adjust to C++ification.
        * sparc-nat.c (sparc_xfer_wcookie): Make extern.
        (inf_ptrace_xfer_partial): Delete.
        (sparc_xfer_partial, sparc_target): Delete.
        * sparc-nat.h (sparc_fetch_inferior_registers)
        (sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
        (sparc_target): Delete function declaration.
        (sparc_target): New template class.
        * sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
        (_initialize_sparcnbsd_nat): Adjust to C++ification.
        * sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
        (_initialize_sparc64fbsd_nat): Adjust to C++ification.  Use
        add_target.
        * sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
        (_initialize_sparc64nbsd_nat): Adjust to C++ification.
        * sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
        (_initialize_sparc64obsd_nat): Adjust to C++ification.  Use
        add_target.
        * vax-bsd-nat.c (vax_bsd_nat_target): New class.
        (the_vax_bsd_nat_target): New.
        (vaxbsd_fetch_inferior_registers)
        (vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
        methods.
        (_initialize_vaxbsd_nat): Adjust to C++ification.

        * bsd-kvm.c (bsd_kvm_target): New class.
        (bsd_kvm_ops): Now a bsd_kvm_target.
        (bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
        (bsd_kvm_files_info, bsd_kvm_fetch_registers)
        (bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
        bsd_kvm_target.
        (bsd_kvm_return_one): Delete.
        (bsd_kvm_add_target): Adjust to C++ification.

        * nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
        (nto_procfs_target_procfs): New classes.
        (procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
        (procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
        (procfs_post_attach, procfs_wait, procfs_fetch_registers)
        (procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
        (procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
        (procfs_remove_hw_breakpoint, procfs_resume)
        (procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
        (procfs_kill_inferior, procfs_store_registers)
        (procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
        as methods of nto_procfs_target.
        (nto_procfs_ops): Now an nto_procfs_target_procfs.
        (nto_native_ops): Delete.
        (procfs_open, procfs_native_open): Delete.
        (nto_native_ops): Now an nto_procfs_target_native.
        (init_procfs_targets): Adjust to C++ification.
        (procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
        (procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
        Refactor as methods of nto_procfs_target.

        * go32-nat.c (go32_nat_target): New class.
        (the_go32_nat_target): New.
        (go32_attach, go32_resume, go32_wait, go32_fetch_registers)
        (go32_store_registers, go32_xfer_partial, go32_files_info)
        (go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
        (go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
        (go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
        (go32_pid_to_str): Refactor as methods of go32_nat_target.
        (go32_target): Delete.
        (_initialize_go32_nat): Adjust to C++ification.

        * gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
        (gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
        (gnu_stop, gnu_thread_alive, gnu_xfer_partial)
        (gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
        gnu_nat_target.
        (gnu_target): Delete.
        * gnu-nat.h (gnu_target): Delete.
        (gnu_nat_target): New class.
        * i386-gnu-nat.c (gnu_base_target): New.
        (i386_gnu_nat_target): New class.
        (the_i386_gnu_nat_target): New.
        (_initialize_i386gnu_nat): Adjust to C++ification.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * bfd-target.c (target_bfd_xclose): Rename to ...
        (target_bfd_close): ... this.
        (target_bfd_reopen): Adjust.
        * target.c (target_close): Remove references to to_xclose.
        * target.h (target_ops::to_xclose): Delete.
        (target_ops::to_close): Update comments.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * alpha-linux-nat.c: Include "linux-nat-trad.h" instead of
        "linux-nat.h".
        * configure.nat (alpha-linux, linux-mips): Add linux-nat-trad.o.
        * inf-ptrace.c (inf_ptrace_register_u_offset)
        (inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
        (inf_ptrace_store_register, inf_ptrace_store_registers)
        (inf_ptrace_trad_target): Move to ...
        * linux-nat-trad.c: ... this new file.
        * linux-nat-trad.h: New file.
        * linux-nat.c (linux_target_install_ops): Make extern.
        (linux_trad_target): Delete.
        * linux-nat.h (linux_trad_target): Delete declaration.
        (linux_target_install_ops): Declare.
        * mips-linux-nat.c: Include "linux-nat-trad.h" instead of
        "linux-nat.h".

2018-05-02  Pedro Alves  <palves@redhat.com>

        * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Don't call
        procfs_target/add_target here.
        * procfs.c (procfs_target): Make static.
        (_initialize_procfs): Call add_target here.
        * procfs.h (struct target_ops): Remove forward declaration.
        (procfs_target): Remove declaration.
        * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Delete.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * procfs.c (procfs_stopped_by_watchpoint)
        (procfs_insert_watchpoint, procfs_remove_watchpoint)
        (procfs_region_ok_for_hw_watchpoint, procfs_stopped_data_address):
        Forward declare.
        (procfs_use_watchpoints): Delete, move contents...
        (procfs_target): ... here.
        * procfs.h (procfs_use_watchpoints): Delete declaration.
        * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Don't call
        procfs_use_watchpoints.
        * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Don't call
        procfs_use_watchpoints.

2018-05-02  Tom Tromey  <tom@tromey.com>

        PR python/20084:
        * python/python.c (gdbpy_parameter_value): Handle var_zuinteger
        and var_zuinteger_unlimited.
        * python/py-param.c (struct parm_constant): Add PARAM_ZUINTEGER
        and PARAM_ZUINTEGER_UNLIMITED.
        (set_parameter_value): Handle var_zuinteger and
        var_zuinteger_unlimited.
        (add_setshow_generic): Likewise.
        (parmpy_init): Likewise.

2018-04-28  Dan Robertson  <danlrobertson89@gmail.com>

        PR rust/23124
        * gdb/rust-exp.y (convert_params_to_types): Ensure that the params
        pointer is not null before dereferencing it.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * darwin-nat-info.c (darwin_debug_regions_recurse): Remove use of
        is_mi_like_p.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * breakpoint.c (mention): Remove use of is_mi_like_p.
        (print_mention_ranged_breakpoint): Likewise.
        * break-catch-throw.c (print_it_exception_catchpoint): Remove use
        of is_mi_like_p.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * tracepoint.c (tvariables_info_1): Remove use of is_mi_like_p.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * spu-tdep.c (info_spu_mailbox_list, info_spu_dma_cmdlist)
        (info_spu_event_command): Remove some uses of is_mi_like_p.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (py_print_single_arg)
        (enumerate_locals, py_print_args, py_print_frame): Remove some
        uses of is_mi_like_p.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * ui-out.c: Update.
        * cli-out.h (cli_ui_out::do_is_mi_like_p): Update.
        * ui-out.h (ui_out::is_mi_like_p): Now const.
        (ui_out::do_is_mi_like_p): Now const.
        * mi/mi-out.h (mi_ui_out::do_is_mi_like_p): Update.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * varobj.c (varobj_set_visualizer): Use new_reference.
        * python/python.c (gdbpy_decode_line): Use new_reference.
        * python/py-cmd.c (cmdpy_function, cmdpy_completer_helper): Use
        new_reference.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * varobj.c (install_new_value): Use new_reference.
        * value.h (value_incref): Return void.  Swap intro comment with
        value_decref.
        * value.c (set_value_parent): Use new_reference.
        (value_incref): Return void.  Update intro comment.
        (release_value): Use new_reference.
        * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use new_reference.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * symfile-mem.c (symbol_file_add_from_memory): Use new_reference.
        * gdb_bfd.h (new_bfd_ref): Remove.
        (gdb_bfd_open): Update comment.
        * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
        (gdb_bfd_openw, gdb_bfd_openr_iovec, gdb_bfd_record_inclusion)
        (gdb_bfd_fdopenr): Use new_reference.
        * exec.c (exec_file_attach): Use new_reference.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * common/gdb_ref_ptr.h (ref_ptr::new_reference): New static
        method.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * jit.c (jit_read_code_entry): Use type_align.
        * i386-tdep.c (i386_gdbarch_init): Don't call
        set_gdbarch_long_long_align_bit.
        * gdbarch.sh: Remove long_long_align_bit.
        * gdbarch.c, gdbarch.h: Rebuild.
        * arc-tdep.c (arc_type_align): New function.
        (arc_gdbarch_init): Use arc_type_align.  Don't call
        set_gdbarch_long_long_align_bit.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_type_alignment): Remove.
        (rust_composite_type): Use type_align.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * NEWS: Mention Type.align.
        * python/py-type.c (typy_get_alignof): New function.
        (type_object_getset): Add "alignof".

2018-04-30  Tom Tromey  <tom@tromey.com>

        PR exp/17095:
        * NEWS: Update.
        * std-operator.def (UNOP_ALIGNOF): New operator.
        * expprint.c (dump_subexp_body_standard) <case UNOP_ALIGNOF>:
        New.
        * eval.c (evaluate_subexp_standard) <case UNOP_ALIGNOF>: New.
        * c-lang.c (c_op_print_tab): Add alignof.
        * c-exp.y (ALIGNOF): New token.
        (exp): Add "ALIGNOF" production.
        (ident_tokens): Add _Alignof and alignof.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * i386-tdep.c (i386_type_align): New function.
        (i386_gdbarch_init): Update.
        * gdbarch.sh (type_align): New method.
        * gdbarch.c, gdbarch.h: Rebuild.
        * arch-utils.h (default_type_align): Declare.
        * arch-utils.c (default_type_align): New function.
        * gdbtypes.h (TYPE_ALIGN_BITS): New define.
        (struct type) <align_log2>: New field.
        <instance_flags>: Now a bitfield.
        (TYPE_RAW_ALIGN): New macro.
        (type_align, type_raw_align, set_type_align): Declare.
        * gdbtypes.c (type_align, type_raw_align, set_type_align): New
        functions.
        * dwarf2read.c (quirk_rust_enum): Set type alignment.
        (get_alignment, maybe_set_alignment): New functions.
        (read_structure_type, read_enumeration_type, read_array_type)
        (read_set_type, read_tag_pointer_type, read_tag_reference_type)
        (read_subrange_type, read_base_type): Set type alignment.

2018-04-30  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (read_index_from_section): Use bool.

2018-04-29  Fabian Groffen  <grobian@gentoo.org>

        PR gdb/22950
        * proc-events.c (init_syscall_table): Guard usage os SYS_uuidsys
        with #ifdef.

2018-04-29  John Reiser  <jreiser@BitWagon.com>

        PR build/22873
        * gdb/Makefile.in: (.c:.l, .c:.y): Write the target only in the
        last step, and do it atomically.

2018-04-27  Alexandre Oliva  <aoliva@redhat.com>

        * compile/compile-c-types.c (convert_int, convert_float):
        Update for C FE v1.

2018-04-27  Tom Tromey  <tom@tromey.com>

        PR rust/22545:
        * rust-lang.c (rust_inclusive_range_type_p): New function.
        (rust_range): Handle inclusive ranges.
        (rust_compute_range): Likewise.
        * rust-exp.y (struct rust_op) <inclusive>: New field.
        (DOTDOTEQ): New constant.
        (range_expr): Add "..=" productions.
        (operator_tokens): Add "..=" token.
        (ast_range): Add "inclusive" parameter.
        (convert_ast_to_expression) <case OP_RANGE>: Handle inclusive
        ranges.
        * parse.c (operator_length_standard) <case OP_RANGE>: Handle new
        bounds values.
        * expression.h (enum range_type) <NONE_BOUND_DEFAULT_EXCLUSIVE,
        LOW_BOUND_DEFAULT_EXCLUSIVE>: New constants.
        Update comments.
        * expprint.c (print_subexp_standard): Handle new bounds values.
        (dump_subexp_body_standard): Likewise.

2018-04-27  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS): Add -Wsuggest-override.
        * dwarf2loc.c (class dwarf_evaluate_loc_desc): Use "override", not
        "OVERRIDE".
        (class symbol_needs_eval_context): Likewise.
        * dwarf2read.c (mock_mapped_index::symbol_name_count)
        (mock_mapped_index::symbol_name_at): Use "override".  Remove
        "virtual".
        * dwarf2-frame.c (dwarf_expr_executor::get_addr_index): Use
        "override".
        (class dwarf_expr_executor): Use "override", not "OVERRIDE".
        * aarch64-tdep.c (instruction_reader::read): Use "override".
        (instruction_reader_test::read): Likewise.
        * arm-tdep.c (instruction_reader::read): Use "override".
        (instruction_reader_thumb::read): Likewise.

2018-04-26  Andrzej Kaczmarek  <andrzej.kaczmarek@codecoup.pl>

        PR remote/9665
        * remote.c (send_g_packet): Use putpkt/getpkt/packet_check_result
        instead of remote_send.
        (remote_send): Remove.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * elfread.c (elf_gnu_ifunc_resolver_return_stop): Use
        find_function_start_sal instead of find_pc_line.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (set_breakpoint_location_function): Handle
        mst_data_gnu_ifunc.
        * c-exp.y (variable production): Handle mst_data_gnu_ifunc.
        * elfread.c (elf_symtab_read): Give data symbols with
        BSF_GNU_INDIRECT_FUNCTION set mst_data_gnu_ifunc type.
        (elf_rel_plt_read): Update comment.
        * linespec.c (convert_linespec_to_sals): Handle
        mst_data_gnu_ifunc.
        (minsym_found): Handle mst_data_gnu_ifunc.
        * minsyms.c (msymbol_is_function, minimal_symbol_reader::record)
        (find_solib_trampoline_target): Handle mst_data_gnu_ifunc.
        * parse.c (find_minsym_type_and_address): Handle
        mst_data_gnu_ifunc.
        * symmisc.c (dump_msymbols): Handle mst_data_gnu_ifunc.
        * symtab.c (find_gnu_ifunc): Handle mst_data_gnu_ifunc.
        * symtab.h (minimal_symbol_type) <mst_text_gnu_ifunc>: Update
        comment.
        <mst_data_gnu_ifunc>: New enumerator.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Rename to ...
        (lookup_minimal_symbol_by_pc_section): ... this.  Replace
        'want_trampoline' parameter by a lookup_msym_prefer parameter.
        Handle it.
        (lookup_minimal_symbol_by_pc_section): Delete old implementation.
        (lookup_minimal_symbol_by_pc): Adjust.
        (in_gnu_ifunc_stub): Prefer GNU ifunc symbols.
        (lookup_solib_trampoline_symbol_by_pc): Adjust.
        * minsyms.h (lookup_msym_prefer): New enum.
        (lookup_minimal_symbol_by_pc_section): Replace 'want_trampoline'
        parameter by a lookup_msym_prefer parameter.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * elfread.c (elf_gnu_ifunc_record_cache): Check if the symbol name
        ends in "@plt" instead of looking at the symbol's section.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * blockframe.c (cache_pc_function_is_gnu_ifunc): Delete.  Remove
        all references.
        (find_pc_partial_function_gnu_ifunc): Rename to ...
        (find_pc_partial_function): ... this, and remove references to
        'is_gnu_ifunc_p'.
        (find_pc_partial_function): Delete old implementation.
        * symtab.h (find_pc_partial_function_gnu_ifunc): Delete.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * linespec.c (struct bound_minimal_symbol_search_key): New.
        (convert_linespec_to_sals): Sort minimal symbols earlier.  Don't
        skip first line if we found a GNU ifunc minimal symbol by name.
        (compare_msymbols): Change parameters to work with a destructured
        lhs minsym.
        (compare_msymbols_for_qsort, compare_msymbols_for_bsearch): New
        functions.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (set_breakpoint_location_function): Don't resolve
        ifunc targets here.  Instead, if we have an ifunc minsym, use its
        address/name.
        (add_location_to_breakpoint): Store the minsym and the objfile in
        the breakpoint location.
        * breakpoint.h (bp_location) <msymbol, objfile>: New fields.
        * linespec.c (minsym_found): Resolve GNU ifunc targets here.
        Record the minsym in the sal.
        * symtab.h (symtab_and_line) <msymbol>: New field.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * elfread.c (elf_gnu_ifunc_resolve_by_got): Don't write to *ADDR_P
        unless we actually resolved the ifunc.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * c-exp.y (variable production): Prefer ifunc minsyms over
        regular function symbols.
        * symtab.c (find_gnu_ifunc): New function.
        * minsyms.h (lookup_msym_prefer): New enum.
        (lookup_minimal_symbol_by_pc_section): Replace 'want_trampoline'
        parameter by a lookup_msym_prefer parameter.
        * symtab.h (find_gnu_ifunc): New declaration.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * blockframe.c (find_gnu_ifunc_target_type): New function.
        (find_function_type): New.
        * eval.c (evaluate_var_msym_value): For GNU ifunc types, always
        return a value with a memory address.
        (eval_call): For calls to GNU ifunc functions, try to find the
        type of the target function from the type that the resolver
        returns.
        * gdbtypes.c (objfile_type): Don't install a return type for ifunc
        symbols.
        * infcall.c (find_function_return_type): Delete.
        (find_function_addr): Add 'function_type' parameter.  For calls to
        GNU ifunc functions, try to find the type of the target function
        from the type that the resolver returns, and return it via
        FUNCTION_TYPE.
        (call_function_by_hand_dummy): Adjust to use the function type
        returned by find_function_addr.
        (find_function_addr): Add 'function_type' parameter and move
        description here.
        * symtab.h (find_function_type, find_gnu_ifunc_target_type): New
        declarations.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * c-exp.y (variable production): Skip finding an alias for ifunc
        symbols.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * elfread.c (elf_rel_plt_read): Look for relocations for .got.plt too.

2018-04-25  Pedro Alves  <palves@redhat.com>

        * infcmd.c (kill_command): Print the pid as string, not the whole
        thread's ptid.  Add comment.  s/has been killed/killed/ in output
        message.
        * remote.c (remote_detach_1): Print the pid as string, not the
        whole thread's ptid.

2018-04-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * infcmd.c (kill_command): Print message when inferior has
        been killed.
        * inferior.c (print_inferior_events): Remove 'static'.  Set as
        '1'.
        (add_inferior): Improve message printed when
        'print_inferior_events' is on.
        (exit_inferior): Remove message printed when
        'print_inferior_events' is on.
        (detach_inferior): Improve message printed when
        'print_inferior_events' is on.
        (initialize_inferiors): Use 'add_inferior_silent' to set
        'current_inferior_'.
        * inferior.h (print_inferior_events): Declare here as
        'extern'.
        * infrun.c (follow_fork_inferior): Print '[Attaching...]' or
        '[Detaching...]' messages when 'print_inferior_events' is on.
        Use 'add_thread_silent' instead of 'add_thread'.  Add '[' and ']'
        as prefix/suffix for messages.  Remove periods.  Fix erroneous
        'Detaching after fork from child...', replace it by '... from
        parent...'.
        (handle_vfork_child_exec_or_exit): Add '[' and ']' as
        prefix/suffix when printing 'Detaching...' messages.  Print
        them when 'print_inferior_events' is on.
        * remote.c (remote_detach_1): Print message when detaching
        from inferior and '!is_fork_parent'.

2018-04-24  Tom Tromey  <tom@tromey.com>

        * cli-out.h: Reindent.

2018-04-24  Tom Tromey  <tom@tromey.com>

        * cli-out.c (cli_ui_out::out_field_fmt): Remove.
        (cli_ui_out::do_field_string): Use fputs_filtered.
        * cli-out.h (class cli_ui_out) <out_field_fmt>: Remove.

2018-04-23  Tom Tromey  <tom@tromey.com>

        * guile/scm-frame.c (gdbscm_frame_read_var): Use
        gdb::unique_xmalloc_ptr.

2018-04-23  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.

2018-04-22  Rajendra SY  <rajendra.sy@gmail.com>

        PR gdb/23095
        * gdb/testsuite/gdb.base/break-probes.exp: Pass shlib_load to
        prepare_for_testing.  Set normal_bp to r_debug_state if target
        is bsd.

2018-04-21  Pedro Alves  <palves@redhat.com>
            Rajendra SY  <rajendra.sy@gmail.com>

        * inf-ptrace.c (inf_ptrace_attach): Mark the thread as executing.
        * remote.c (extended_remote_attach): In all-stop mode, mark the
        thread as executing.

2018-04-19  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * thread.c (thread_apply_all_command): Fix comment.
        (thread_command): Fix comment.

2018-04-10  Alan Hayward  <alan.hayward@arm.com>

        * common/tdesc.h (tdesc_create_feature): Remove xml filename
        parameter.
        * features/aarch64-core.c (create_feature_aarch64_core):
        Regenerate.
        * features/aarch64-fpu.c (create_feature_aarch64_fpu):
        Likewise.
        * features/i386/32bit-avx.c (create_feature_i386_32bit_avx):
        Likewise.
        * features/i386/32bit-avx512.c
        (create_feature_i386_32bit_avx512): Likewise.
        * features/i386/32bit-core.c (create_feature_i386_32bit_core):
        Likewise.
        * features/i386/32bit-linux.c (create_feature_i386_32bit_linux):
        Likewise.
        * features/i386/32bit-mpx.c (create_feature_i386_32bit_mpx):
        Likewise.
        * features/i386/32bit-pkeys.c (create_feature_i386_32bit_pkeys):
        Likewise.
        * features/i386/32bit-sse.c (create_feature_i386_32bit_sse):
        Likewise.
        * features/i386/64bit-avx.c (create_feature_i386_64bit_avx):
        Likewise.
        * features/i386/64bit-avx512.c
        (create_feature_i386_64bit_avx512): Likewise.
        * features/i386/64bit-core.c (create_feature_i386_64bit_core):
        Likewise.
        * features/i386/64bit-linux.c (create_feature_i386_64bit_linux):
        Likewise.
        * features/i386/64bit-mpx.c (create_feature_i386_64bit_mpx):
        Likewise.
        * features/i386/64bit-pkeys.c (create_feature_i386_64bit_pkeys):
        Likewise.
        * features/i386/64bit-segments.c
        (create_feature_i386_64bit_segments): Likewise.
        * features/i386/64bit-sse.c (create_feature_i386_64bit_sse):
        Likewise.
        * features/i386/x32-core.c
        (create_feature_i386_x32_core): Likewise.
        * features/tic6x-c6xp.c (create_feature_tic6x_c6xp): Likewise.
        * features/tic6x-core.c (create_feature_tic6x_core): Likewise.
        * features/tic6x-gp.c (create_feature_tic6x_gp): Likewise.
        * target-descriptions.c: In generated code, don't pass xml
        filename.

2018-04-18  Alan Hayward  <alan.hayward@arm.com>

        * common/tdesc.c (print_xml_feature::visit_pre): Add xml parsing.
        (print_xml_feature::visit_post): Likewise.
        (print_xml_feature::visit): Likewise.
        * common/tdesc.h (tdesc_get_features_xml): Use const tdesc.
        (print_xml_feature): Add new class.
        * regformats/regdat.sh: Null xmltarget on feature targets.
        * target-descriptions.c (struct target_desc): Add xmltarget.
        (maintenance_check_tdesc_xml_convert): Add unittest function.
        (tdesc_get_features_xml): Add function to get xml.
        (maintenance_check_xml_descriptions): Test xml generation.
        * xml-tdesc.c (string_read_description_xml): Add function.
        * xml-tdesc.h (string_read_description_xml): Add declaration.

2018-04-18  Alan Hayward  <alan.hayward@arm.com>

        * features/Makefile: Add feature marker to targets with new style
        target descriptions.
        * regformats/aarch64.dat: Regenerate.
        * regformats/i386/amd64-avx-avx512-linux.dat: Likewise.
        * regformats/i386/amd64-avx-linux.dat: Likewise.
        * regformats/i386/amd64-avx-mpx-avx512-pku-linux.dat: Likewise.
        * regformats/i386/amd64-avx-mpx-linux.dat: Likewise.
        * regformats/i386/amd64-linux.dat: Likewise.
        * regformats/i386/amd64-mpx-linux.dat: Likewise.
        * regformats/i386/amd64.dat: Likewise.
        * regformats/i386/i386-avx-avx512-linux.dat: Likewise.
        * regformats/i386/i386-avx-linux.dat: Likewise.
        * regformats/i386/i386-avx-mpx-avx512-pku-linux.dat: Likewise.
        * regformats/i386/i386-avx-mpx-linux.dat: Likewise.
        * regformats/i386/i386-linux.dat: Likewise.
        * regformats/i386/i386-mmx-linux.dat: Likewise.
        * regformats/i386/i386-mpx-linux.dat: Likewise.
        * regformats/i386/i386.dat: Likewise.
        * regformats/i386/x32-avx-avx512-linux.dat: Likewise.
        * regformats/i386/x32-avx-linux.dat: Likewise.
        * regformats/i386/x32-linux.dat: Likewise.
        * regformats/tic6x-c62x-linux.dat: Likewise.
        * regformats/tic6x-c64x-linux.dat: Likewise.
        * regformats/tic6x-c64xp-linux.dat: Likewise.
        * regformats/regdat.sh: Parse feature marker.

2018-04-18  Alan Hayward  <alan.hayward@arm.com>

        * common/tdesc.h (tdesc_architecture_name): Add new declaration.
        (tdesc_osabi_name): Likewise.
        * target-descriptions.c (tdesc_architecture_name): Add new
        function.
        (tdesc_osabi_name): Likewise.

2018-04-18  Alan Hayward  <alan.hayward@arm.com>

        * common/tdesc.c (tdesc_predefined_type): Move to here.
        (tdesc_named_type): Likewise.
        (tdesc_create_vector): Likewise.
        (tdesc_create_struct): Likewise.
        (tdesc_set_struct_size): Likewise.
        (tdesc_create_union): Likewise.
        (tdesc_create_flags): Likewise.
        (tdesc_create_enum): Likewise.
        (tdesc_add_field): Likewise.
        (tdesc_add_typed_bitfield): Likewise.
        (tdesc_add_bitfield): Likewise.
        (tdesc_add_flag): Likewise.
        (tdesc_add_enum_value): Likewise.
        * common/tdesc.h (struct tdesc_type_builtin): Likewise.
        (struct tdesc_type_vector): Likewise.
        (struct tdesc_type_field): Likewise.
        (struct tdesc_type_with_fields): Likewise.
        (tdesc_create_enum): Add declaration.
        (tdesc_add_typed_bitfield): Likewise.
        (tdesc_add_enum_value): Likewise.
        * target-descriptions.c (tdesc_type_field): Move from here.
        (tdesc_type_builtin): Likewise.
        (tdesc_type_vector): Likewise.
        (tdesc_type_with_fields): Likewise.
        (tdesc_predefined_types): Likewise.
        (tdesc_named_type): Likewise.
        (tdesc_create_vector): Likewise.
        (tdesc_create_struct): Likewise.
        (tdesc_set_struct_size): Likewise.
        (tdesc_create_union): Likewise.
        (tdesc_create_flags): Likewise.
        (tdesc_create_enum): Likewise.
        (tdesc_add_field): Likewise.
        (tdesc_add_typed_bitfield): Likewise.
        (tdesc_add_bitfield): Likewise.
        (tdesc_add_flag): Likewise.
        (tdesc_add_enum_value): Likewise.
        * gdb/target-descriptions.h (tdesc_create_enum): Likewise.
        (tdesc_add_typed_bitfield): Likewise.
        (tdesc_add_enum_value): Likewise.

2018-04-18  Alan Hayward  <alan.hayward@arm.com>

        * common/tdesc.c (tdesc_feature::accept): Move to here.
        (tdesc_feature::operator==): Likewise.
        (tdesc_create_reg): Likewise.
        * common/tdesc.h (tdesc_type_kind): Likewise.
        (struct tdesc_type): Likewise.
        (struct tdesc_feature): Likewise.
        * regformats/regdat.sh: Create a feature.
        * target-descriptions.c (tdesc_type_kind): Move from here.
        (tdesc_type): Likewise.
        (tdesc_type_up): Likewise.
        (tdesc_feature): Likewise.
        (tdesc_create_reg): Likewise.

2018-04-18  Alan Hayward  <alan.hayward@arm.com>

        * Makefile.in: Add arch/tdesc.c
        * common/tdesc.c: New file.
        * common/tdesc.h (tdesc_element_visitor): Move to here.
        (tdesc_element): Likewise.
        (tdesc_reg): Likewise.
        (tdesc_reg_up): Likewise.
        * regformats/regdef.h (reg): Add offset to constructors.
        * target-descriptions.c (tdesc_element_visitor): Move from here.
        (tdesc_element): Likewise.
        (tdesc_reg): Likewise.
        (tdesc_reg_up): Likewise.

2018-04-17  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (quirk_rust_enum): Conditionally drop the
        discriminant field.

2018-04-17  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (quirk_rust_enum): Handle unions correctly.

2018-04-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * symtab.c (print_symbol_info): Skip printing filename and line
        number when `last' is NULL.
        (symtab_symbol_info): Use empty string instead of NULL for first
        invocation of print_symbol_info.
        (rbreak_command): Pass NULL to `last' parameter of
        print_symbol_info.

2018-04-16  Simon Marchi  <simon.marchi@ericsson.com>

        * linux-tdep.c (linux_spu_make_corefile_notes): Return note_data
        instead of nullptr.

2018-04-16  Pedro Alves  <palves@redhat.com>

        * MAINTAINERS (sh): Remove.
        * Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o.
        (HFILES_NO_SRCDIR): Remove sh64-tdep.h.
        (ALLDEPFILES): Remove sh64-tdep.c.
        * NEWS: Mentions that support for SH-5/SH64 is removed.
        * configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o.
        (sh*-*-openbsd*): Ditto.
        (sh64-*-elf*): Remove.
        (sh*): Remove.
        * regcache.c (cooked_write_test): Remove bfd_mach_sh5 case.
        * sh-linux-tdep.c: Remove reference to bfd_mach_sh5.
        * sh-tdep.c: No longer include "sh64-tdep.h".
        (sh_gdbarch_init): Remove reference to bfd_mach_sh5.
        * sh64-tdep.c, sh64-tdep.h: Remove files.

2018-04-16  Pedro Alves  <palves@redhat.com>

        * MAINTAINERS: Remove m88k.
        * Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o.
        (HFILES_NO_SRCDIR): Remove m88k-tdep.h.
        (ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c.
        * NEWS: Mention that support for m88k was removed.
        * configure.host (m88*-*-*): Remove support.
        * configure.nat (m88k-*-*): Remove support.
        * configure.tgt (m88*-*-openbsd*): Remove.
        * m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.

2018-04-15  Simon Marchi  <simon.marchi@polymtl.ca>

        * configure.tgt (x86_tobjs): New variable.
        (amd64_tobjs, i386_tobjs): Use it.

2018-04-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * symtab.c (print_symbol_info): Precede the symbol definition by
        the line number when available.
        * NEWS: Advertise this enhancement.

2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * NEWS (New options): announce set/show record btrace cpu.
        * btrace.c: Include record-btrace.h.
        (btrace_compute_ftrace_pt): Skip enabling errata workarounds if
        the vendor is unknown.
        (btrace_compute_ftrace_1): Add cpu parameter.  Update callers.
        Maybe overwrite the btrace configuration's cpu.
        (btrace_compute_ftrace): Add cpu parameter.  Update callers.
        (btrace_fetch): Add cpu parameter.  Update callers.
        (btrace_maint_update_pt_packets): Call record_btrace_get_cpu.
        Maybe overwrite the btrace configuration's cpu.  Skip enabling
        errata workarounds if the vendor is unknown.
        * python/py-record-btrace.c: Include record-btrace.h.
        (recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history)
        (recpy_bt_function_call_history): Call record_btrace_get_cpu.
        * record-btrace.c (record_btrace_cpu_state_kind): New.
        (record_btrace_cpu): New.
        (set_record_btrace_cpu_cmdlist): New.
        (record_btrace_get_cpu): New.
        (require_btrace_thread, record_btrace_info)
        (record_btrace_resume_thread): Call record_btrace_get_cpu.
        (cmd_set_record_btrace_cpu_none): New.
        (cmd_set_record_btrace_cpu_auto): New.
        (cmd_set_record_btrace_cpu): New.
        (cmd_show_record_btrace_cpu): New.
        (_initialize_record_btrace): Initialize set/show record btrace cpu
        commands.
        * record-btrace.h (record_btrace_get_cpu): New.

2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * record.c (set_record_command): Fix typo in message.

2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * record-btrace.c (cmd_set_record_btrace): Print sub-commands.

2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * infrun.c (process_event_stop_test): Call
        gdbarch_in_indirect_branch_thunk.
        * gdbarch.sh (in_indirect_branch_thunk): New.
        * gdbarch.c: Regenerated.
        * gdbarch.h: Regenerated.
        * x86-tdep.h: New.
        * x86-tdep.c: New.
        * Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
        (HFILES_NO_SRCDIR): Add x86-tdep.h.
        (ALLDEPFILES): Add x86-tdep.c.
        * arch-utils.h (default_in_indirect_branch_thunk): New.
        * arch-utils.c (default_in_indirect_branch_thunk): New.
        * i386-tdep: Include x86-tdep.h.
        (i386_in_indirect_branch_thunk): New.
        (i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
        function.
        * amd64-tdep: Include x86-tdep.h.
        (amd64_in_indirect_branch_thunk): New.
        (amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.

2018-04-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/23053
        * dwarf-index-write.c (data_buf::grow) (write_one_signatured_type)
        (recursively_write_psymbols) (debug_names::recursively_write_psymbols)
        (debug_names::write_one_signatured_type): Fix -D_GLIBCXX_DEBUG
        regression.

2018-04-12  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_print_struct_def): Remove univariant code.
        (rust_evaluate_subexp): Likewise.

2018-04-12  Pedro Alves  <palves@redhat.com>

        * procfs.c (procfs_detach): Make forward declaration's prototype
        match definition's protototype.
        (proc_get_LDT_entry): Remove stale do_cleanups call.

2018-04-12  Pedro Alves  <palves@redhat.com>

        * target.h (target_ops::to_has_exited): Delete.
        (target_has_exited): Delete.
        * target-delegates.c: Regenerate.

2018-04-11  Pedro Alves  <palves@redhat.com>

        * target.c (fileio_fh_t::t): Add comment.
        (target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
        (target_fileio_close): Handle a NULL target.
        (invalidate_fileio_fh): New.
        (target_close): Call it.
        * remote.c (remote_hostio_send_command): No longer check whether
        remote_desc is open.

2018-04-11  Pedro Alves  <palves@redhat.com>

        * target.c (fileio_fh_t): Make it a named struct instead of a
        typedef.
        (fileio_fh_t::is_closed): New method.
        (DEF_VEC_O (fileio_fh_t)): Remove.
        (fileio_fhandles): Now a std::vector.
        (is_closed_fileio_fh): Delete.
        (acquire_fileio_fd): Adjust.  Rename parameters.
        (release_fileio_fd): Adjust.
        (fileio_fd_to_fh): Reimplement as a function instead of a macro.
        (target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
        (target_fileio_close): Adjust.

2018-04-10  Simon Marchi  <simon.marchi@ericsson.com>

        * auto-load.c (auto_load_safe_path_vec_update): Iterate by
        index.

2018-04-10  Pedro Alves  <palves@redhat.com>

        * gdbthread.h (finish_thread_state_cleanup): Delete declaration.
        (scoped_finish_thread_state): New class.
        * infcmd.c (run_command_1): Use it instead of finish_thread_state
        cleanup.
        * infrun.c (proceed, prepare_for_detach, wait_for_inferior)
        (fetch_inferior_event, normal_stop): Likewise.
        * thread.c (finish_thread_state_cleanup): Delete.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>
            Pedro Alves  <palves@redhat.com>

        * value.c: Include "selftest.h" and "common/array-view.h".
        (struct range) <operator ==>: New.
        (test_ranges_contain): New.
        (check_ranges_vector): New.
        (test_insert_into_bit_range_vector): New.
        (_initialize_values): Register selftests.
        * common/array-view.h (operator==, operator!=): New.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/gdb_vecs.h (unordered_remove): Add overload that takes
        an iterator.
        * inline-frame.c: Include <algorithm>.
        (struct inline_state): Add constructor.
        (inline_state_s): Remove.
        (DEF_VEC_O(inline_state_s)): Remove.
        (inline_states): Change type to std::vector.
        (find_inline_frame_state): Adjust to std::vector.
        (allocate_inline_frame_state): Remove.
        (clear_inline_frame_state): Adjust to std::vector.
        (skip_inline_frames): Adjust to std::vector.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * tracepoint.h (struct trace_state_variable): Add constructor.
        <name>: Change type to std::string.
        * tracepoint.c (tsv_s): Remove.
        (DEF_VEC_O(tsv_s)): Remove.
        (tvariables): Change to std::vector.
        (create_trace_state_variable): Adjust to std::vector.
        (find_trace_state_variable): Likewise.
        (find_trace_state_variable_by_number): Likewise.
        (delete_trace_state_variable): Likewise.
        (trace_variable_command): Adjust to std::string.
        (delete_trace_variable_command): Likewise.
        (tvariables_info_1): Adjust to std::vector.
        (save_trace_state_variables): Likewise.
        (start_tracing): Likewise.
        (merge_uploaded_trace_state_variables): Adjust to std::vector
        and std::string.
        * target.h (struct target_ops)
        <to_download_trace_state_variable>: Pass reference to
        trace_state_variable.
        * target-debug.h (target_debug_print_const_trace_state_variable_r): New.
        * target-delegates.c: Re-generate.
        * mi/mi-interp.c (mi_tsv_created): Adjust to std::string.
        (mi_tsv_deleted): Likewise.
        * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
        * remote.c (remote_download_trace_state_variable): Change
        pointer to reference and adjust.
        * make-target-delegates (parse_argtypes): Handle references.
        (write_function_header): Likewise.
        (munge_type): Likewise.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        string_view-selftests.c.
        * unittests/basic_string_view/capacity/1.cc: Adapt to GDB
        testsuite.
        * unittests/basic_string_view/cons/char/1.cc: Likewise.
        * unittests/basic_string_view/cons/char/2.cc: Likewise.
        * unittests/basic_string_view/cons/char/3.cc: Likewise.
        * unittests/basic_string_view/element_access/char/1.cc:
        Likewise.
        * unittests/basic_string_view/element_access/char/empty.cc:
        Likewise.
        * unittests/basic_string_view/element_access/char/front_back.cc:
        Likewise.
        * unittests/basic_string_view/inserters/char/2.cc: Likewise.
        * unittests/basic_string_view/modifiers/remove_prefix/char/1.cc:
        Likewise.
        * unittests/basic_string_view/modifiers/remove_suffix/char/1.cc:
        Likewise.
        * unittests/basic_string_view/modifiers/swap/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operations/compare/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operations/compare/char/13650.cc:
        Likewise.
        * unittests/basic_string_view/operations/copy/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operations/data/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operations/find/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operations/find/char/2.cc:
        Likewise.
        * unittests/basic_string_view/operations/find/char/3.cc:
        Likewise.
        * unittests/basic_string_view/operations/find/char/4.cc:
        Likewise.
        * unittests/basic_string_view/operations/rfind/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operations/rfind/char/2.cc:
        Likewise.
        * unittests/basic_string_view/operations/rfind/char/3.cc:
        Likewise.
        * unittests/basic_string_view/operations/substr/char/1.cc:
        Likewise.
        * unittests/basic_string_view/operators/char/2.cc: Likewise.
        * unittests/string_view-selftests.c: New file.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * unittests/basic_string_view/capacity/1.cc: New file.
        * unittests/basic_string_view/capacity/empty_neg.cc: New file.
        * unittests/basic_string_view/cons/char/1.cc: New file.
        * unittests/basic_string_view/cons/char/2.cc: New file.
        * unittests/basic_string_view/cons/char/3.cc: New file.
        * unittests/basic_string_view/cons/wchar_t/1.cc: New file.
        * unittests/basic_string_view/cons/wchar_t/2.cc: New file.
        * unittests/basic_string_view/cons/wchar_t/3.cc: New file.
        * unittests/basic_string_view/element_access/char/1.cc: New file.
        * unittests/basic_string_view/element_access/char/2.cc: New file.
        * unittests/basic_string_view/element_access/char/empty.cc: New file.
        * unittests/basic_string_view/element_access/char/front_back.cc: New file.
        * unittests/basic_string_view/element_access/wchar_t/1.cc: New file.
        * unittests/basic_string_view/element_access/wchar_t/2.cc: New file.
        * unittests/basic_string_view/element_access/wchar_t/empty.cc: New file.
        * unittests/basic_string_view/element_access/wchar_t/front_back.cc: New file.
        * unittests/basic_string_view/include.cc: New file.
        * unittests/basic_string_view/inserters/char/1.cc: New file.
        * unittests/basic_string_view/inserters/char/2.cc: New file.
        * unittests/basic_string_view/inserters/char/3.cc: New file.
        * unittests/basic_string_view/inserters/pod/10081-out.cc: New file.
        * unittests/basic_string_view/inserters/wchar_t/1.cc: New file.
        * unittests/basic_string_view/inserters/wchar_t/2.cc: New file.
        * unittests/basic_string_view/inserters/wchar_t/3.cc: New file.
        * unittests/basic_string_view/literals/types.cc: New file.
        * unittests/basic_string_view/literals/values.cc: New file.
        * unittests/basic_string_view/modifiers/remove_prefix/char/1.cc: New file.
        * unittests/basic_string_view/modifiers/remove_prefix/wchar_t/1.cc: New file.
        * unittests/basic_string_view/modifiers/remove_suffix/char/1.cc: New file.
        * unittests/basic_string_view/modifiers/remove_suffix/wchar_t/1.cc: New file.
        * unittests/basic_string_view/modifiers/swap/char/1.cc: New file.
        * unittests/basic_string_view/modifiers/swap/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operations/compare/char/1.cc: New file.
        * unittests/basic_string_view/operations/compare/char/13650.cc: New file.
        * unittests/basic_string_view/operations/compare/char/2.cc: New file.
        * unittests/basic_string_view/operations/compare/char/70483.cc: New file.
        * unittests/basic_string_view/operations/compare/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operations/compare/wchar_t/13650.cc: New file.
        * unittests/basic_string_view/operations/compare/wchar_t/2.cc: New file.
        * unittests/basic_string_view/operations/copy/char/1.cc: New file.
        * unittests/basic_string_view/operations/copy/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operations/data/char/1.cc: New file.
        * unittests/basic_string_view/operations/data/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operations/find/char/1.cc: New file.
        * unittests/basic_string_view/operations/find/char/2.cc: New file.
        * unittests/basic_string_view/operations/find/char/3.cc: New file.
        * unittests/basic_string_view/operations/find/char/4.cc: New file.
        * unittests/basic_string_view/operations/find/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operations/find/wchar_t/2.cc: New file.
        * unittests/basic_string_view/operations/find/wchar_t/3.cc: New file.
        * unittests/basic_string_view/operations/find/wchar_t/4.cc: New file.
        * unittests/basic_string_view/operations/rfind/char/1.cc: New file.
        * unittests/basic_string_view/operations/rfind/char/2.cc: New file.
        * unittests/basic_string_view/operations/rfind/char/3.cc: New file.
        * unittests/basic_string_view/operations/rfind/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operations/rfind/wchar_t/2.cc: New file.
        * unittests/basic_string_view/operations/rfind/wchar_t/3.cc: New file.
        * unittests/basic_string_view/operations/string_conversion/1.cc: New file.
        * unittests/basic_string_view/operations/substr/char/1.cc: New file.
        * unittests/basic_string_view/operations/substr/wchar_t/1.cc: New file.
        * unittests/basic_string_view/operators/char/2.cc: New file.
        * unittests/basic_string_view/operators/wchar_t/2.cc: New file.
        * unittests/basic_string_view/range_access/char/1.cc: New file.
        * unittests/basic_string_view/range_access/wchar_t/1.cc: New file.
        * unittests/basic_string_view/requirements/explicit_instantiation/1.cc: New file.
        * unittests/basic_string_view/requirements/explicit_instantiation/char/1.cc: New file.
        * unittests/basic_string_view/requirements/explicit_instantiation/char16_t/1.cc: New file.
        * unittests/basic_string_view/requirements/explicit_instantiation/char32_t/1.cc: New file.
        * unittests/basic_string_view/requirements/explicit_instantiation/wchar_t/1.cc: New file.
        * unittests/basic_string_view/requirements/typedefs.cc: New file.
        * unittests/basic_string_view/typedefs.cc: New file.
        * unittests/basic_string_view/types/1.cc: New file.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/gdb_string_view.h: Remove libstdc++ implementation
        details, adjust to gdb reality.
        * common/gdb_string_view.tcc: Likewise.
        * cli/cli-script.c (struct string_view): Remove.
        (user_args) <m_args>: Change element type to gdb::string_view.
        (user_args::insert_args): Adjust.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/gdb_string_view.h: New file.
        * common/gdb_string_view.tcc: New file.

2018-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * ax_cxx_compile_stdcxx.m4: Sync with upstream.
        * configure: Re-generate.

2018-04-09  Pedro Alves  <palves@redhat.com>

        * gdbarch.sh: Include "observable.h" instead of "observer.h".
        (set_target_gdbarch): Call
        gdb::observers::architecture_changed.notify instead of
        observer_notify_architecture_changed.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * tracepoint.c (struct current_traceframe_cleanup): Remove.
        (do_restore_current_traceframe_cleanup): Remove.
        (restore_current_traceframe_cleanup_dtor): Remove.
        (make_cleanup_restore_current_traceframe): Remove.
        (scoped_restore_current_traceframe::scoped_restore_current_traceframe):
        New.
        * tracepoint.h (struct scoped_restore_current_traceframe): New.
        * infrun.c (fetch_inferior_event): Use
        scoped_restore_current_traceframe.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.h (struct dwarf2_per_objfile) <n_type_units>:
        Remove.
        <n_allocated_type_units>: Remove.
        <all_type_units>: Change to std::vector.
        * dwarf2read.c (dwarf2_per_objfile::~dwarf2_per_objfile): Adjust
        to std::vector change.
        (dwarf2_per_objfile::get_cutu): Likewise.
        (dwarf2_per_objfile::get_tu): Likewise.
        (create_signatured_type_table_from_index): Likewise.
        (create_signatured_type_table_from_debug_names): Likewise.
        (dw2_symtab_iter_next): Likewise.
        (dw2_print_stats): Likewise.
        (dw2_expand_all_symtabs): Likewise.
        (dw2_expand_marked_cus): Likewise.
        (dw2_debug_names_iterator::next): Likewise.
        (dwarf2_initialize_objfile): Likewise.
        (add_signatured_type_cu_to_table): Likewise.
        (create_all_type_units): Likewise.
        (add_type_unit): Likewise.
        (struct tu_abbrev_offset): Add constructor.
        (build_type_psymtabs_1): Adjust to std::vector change.
        (print_tu_stats): Likewise.
        * dwarf-index-write.c (check_dwarf64_offsets): Likewise.
        (write_debug_names): Likewise.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.h (struct dwarf2_per_objfile) <all_comp_units>: Likewise.
        Make an std::vector.
        <n_comp_units>: Remove.
        * dwarf2read.c (dwarf2_per_objfile::~dwarf2_per_objfile): Adjust
        to std::vector change.
        (dwarf2_per_objfile::get_cutu): Likewise.
        (dwarf2_per_objfile::get_cu): Likewise.
        (create_cus_from_index): Likewise.
        (create_addrmap_from_index): Likewise.
        (create_addrmap_from_aranges): Likewise.
        (dwarf2_read_index): Likewise.
        (dw2_find_last_source_symtab): Likewise.
        (dw2_map_symtabs_matching_filename): Likewise.
        (dw2_symtab_iter_next): Likewise.
        (dw2_print_stats): Likewise.
        (dw2_expand_all_symtabs): Likewise.
        (dw2_expand_symtabs_with_fullname): Likewise.
        (dw2_expand_marked_cus): Likewise.
        (dw2_map_symbol_filenames): Likewise.
        (create_cus_from_debug_names): Likewise.
        (dwarf2_read_debug_names): Likewise.
        (dw2_debug_names_iterator::next): Likewise.
        (dwarf2_initialize_objfile): Likewise.
        (set_partial_user): Likewise.
        (dwarf2_build_psymtabs_hard): Likewise.
        (read_comp_units_from_section): Remove arguments, adjust to
        std::vector change.
        (create_all_comp_units): Adjust to std::vector and
        read_comp_units_from_section changes.
        (dwarf2_find_containing_comp_unit): Adjust to std::vector
        change.
        * dwarf-index-write.c (check_dwarf64_offsets): Likewise.
        (psyms_seen_size): Likewise.
        (write_gdbindex): Likewise.
        (write_debug_names): Likewise.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.c (create_cus_from_index_list): Replace objfile arg
        with dwarf2_per_objfile.
        (create_cus_from_index): Likewise.
        (create_signatured_type_table_from_index): Likewise.
        (dwarf2_read_index): Likewise.
        (dwarf2_initialize_objfile): Likewise.
        (dwarf2_fetch_die_loc_sect_off):  Get dwarf2_per_objfile from
        per_cu rather than get_dwarf2_per_objfile.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.h (struct signatured_type): Forward declare.
        (struct dwarf2_per_objfile) <get_cutu, get_cu, get_tu>:
        New methods.
        * dwarf2read.c (dwarf2_per_objfile::get_cutu): Rename from...
        (dw2_get_cutu): ...this.
        (dwarf2_per_objfile::get_cu): Rename from...
        (dw2_get_cu): ...this.
        (dwarf2_per_objfile::get_tu): New.
        (create_addrmap_from_index): Adjust.
        (create_addrmap_from_aranges): Adjust.
        (dw2_find_last_source_symtab): Adjust.
        (dw2_map_symtabs_matching_filename): Adjust.
        (dw2_symtab_iter_next): Adjust.
        (dw2_print_stats): Adjust.
        (dw2_expand_all_symtabs): Adjust.
        (dw2_expand_symtabs_with_fullname): Adjust.
        (dw2_expand_marked_cus): Adjust.
        (dw_expand_symtabs_matching_file_matcher): Adjust.
        (dw2_map_symbol_filenames): Adjust.
        (dw2_debug_names_iterator::next): Adjust.
        (dwarf2_initialize_objfile): Adjust.
        (set_partial_user): Adjust.
        (dwarf2_build_psymtabs_hard): Adjust.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.c (create_signatured_type_table_from_debug_names):
        Remove unused variables.
        (dw2_map_symtabs_matching_filename): Likewise.
        (dwarf2_record_block_ranges): Likewise.
        (dwarf2_read_addr_index): Likewise.
        (follow_die_offset): Likewise.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * progspace.c (clone_program_space): Pass SYMFILE_DEFER_BP_RESET
        to symbol_file_add_main.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        PR mi/22299
        * mi/mi-console.c (do_fputc_async_safe): New.
        (mi_console_file::write_async_safe): New.
        (mi_console_file::flush): Adjust calls to fputstrn_unfiltered.
        * mi/mi-console.h (class mi_console_file) <write_async_safe>:
        New.
        * ui-file.c (ui_file::putstrn): Adjust call to
        fputstrn_unfiltered.
        * utils.c (printchar): Replace do_fputs and do_fprintf
        parameters by do_fputc.
        (fputstr_filtered): Adjust call to printchar.
        (fputstr_unfiltered): Likewise.
        (fputstrn_filtered): Likewise.
        (fputstrn_unfiltered): Add do_fputc parameter, pass to
        printchar.
        * utils.h (do_fputc_ftype): New typedef.
        (fputstrn_unfiltered): Add do_fputc parameter.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * regformats/i386/i386-avx.dat: Remove.

2018-04-07  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/22979
        * amd64-tdep.c (amd64_none_init_abi): New function.
        (amd64_x32_none_init_abi): New function.
        (_initialize_amd64_tdep): Register handlers for x86-64 and
        x64_32 with GDB_OSABI_NONE.
        * osabi.c (gdbarch_init_osabi): Allow running handlers for the
        GDB_OSABI_NONE osabi.

2018-04-07  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/22980
        * defs.h (enum gdb_osabi): Remove GDB_OSABI_UNINITIALIZED, add
        GDB_OSABI_NONE.
        * arch-utils.c (gdbarch_info_init): Don't set info->osabi.
        * osabi.c (gdb_osabi_names): Add "unknown" entry.

2018-04-07  Simon Marchi  <simon.marchi@ericsson.com>

        * common/byte-vector.h (char_vector): New type.
        * target.h (target_read_alloc): Return
        gdb::optional<byte_vector>.
        (target_read_stralloc): Return gdb::optional<char_vector>.
        (target_get_osdata): Return gdb::optional<char_vector>.
        * target.c (target_read_alloc_1): Templatize.  Replacement
        manual memory management with vector.
        (target_read_alloc): Change return type, adjust.
        (target_read_stralloc): Change return type, adjust.
        (target_get_osdata): Change return type, adjust.
        * auxv.c (struct auxv_info) <length>: Remove.
        <data>: Change type to gdb::optional<byte_vector>.
        (auxv_inferior_data_cleanup): Free auxv_info with delete.
        (get_auxv_inferior_data): Allocate auxv_info with new, adjust.
        (target_auxv_search): Adjust.
        (fprint_target_auxv): Adjust.
        * avr-tdep.c (avr_io_reg_read_command): Adjust.
        * linux-tdep.c (linux_spu_make_corefile_notes): Adjust.
        (linux_make_corefile_notes): Adjust.
        * osdata.c (get_osdata): Adjust.
        * remote.c (remote_get_threads_with_qxfer): Adjust.
        (remote_memory_map): Adjust.
        (remote_traceframe_info): Adjust.
        (btrace_read_config): Adjust.
        (remote_read_btrace): Adjust.
        (remote_pid_to_exec_file): Adjust.
        * solib-aix.c (solib_aix_get_library_list): Adjust.
        * solib-dsbt.c (decode_loadmap): Don't free buf.
        (dsbt_get_initial_loadmaps): Adjust.
        * solib-svr4.c (svr4_current_sos_via_xfer_libraries): Adjust.
        * solib-target.c (solib_target_current_sos): Adjust.
        * tracepoint.c (sdata_make_value): Adjust.
        * xml-support.c (xinclude_start_include): Adjust.
        (xml_fetch_content_from_file): Adjust.
        * xml-support.h (xml_fetch_another): Change return type.
        (xml_fetch_content_from_file): Change return type.
        * xml-syscall.c (xml_init_syscalls_info): Adjust.
        * xml-tdesc.c (file_read_description_xml): Adjust.
        (fetch_available_features_from_target): Change return type.
        (target_fetch_description_xml): Adjust.
        (target_read_description_xml): Adjust.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (~value): Update.
        (struct value) <contents>: Now unique_xmalloc_ptr.
        (value_contents_bits_eq, allocate_value_contents)
        (value_contents_raw, value_contents_all_raw)
        (value_contents_for_printing, value_contents_for_printing_const)
        (set_value_enclosing_type): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (range_s): Remove typedef, VEC.
        (struct range): Add operator<.
        (range_lessthan): Remove.
        (ranges_contain): Change type.
        (~value): Update.
        (struct value) <unavailable, optimized_out>: Now std::vector.
        (value_entirely_available)
        (value_entirely_covered_by_range_vector)
        (value_entirely_unavailable, value_entirely_optimized_out):
        Update.
        (insert_into_bit_range_vector): Change argument type.
        (find_first_range_overlap): Likewise.
        (struct ranges_and_idx, value_contents_bits_eq)
        (require_not_optimized_out, require_available): Update.
        (ranges_copy_adjusted): Change argument types.
        (value_optimized_out, value_copy, value_fetch_lazy): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (~value): Update.
        (struct value) <parent>: Now a value_ref_ptr.
        (value_parent, set_value_parent, value_address, value_copy):
        Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (struct value): Add constructor, destructor, and member
        initializers.
        (allocate_value_lazy, value_decref): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (struct value) <released, next>: Remove.
        (all_values): Now a std::vector.
        (allocate_value_lazy): Update.
        (value_next): Remove.
        (value_mark, value_free_to_mark, release_value)
        (value_release_to_mark): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.h (fetch_subexp_value, value_release_to_mark): Update.
        (free_value_chain): Remove.
        * value.c (free_value_chain): Remove.
        (value_release_to_mark): Return a std::vector.
        * ppc-linux-nat.c (num_memory_accesses): Change "chain" to a
        std::vector.
        (check_condition): Update.
        * eval.c (fetch_subexp_value): Change "val_chain" to a
        std::vector.
        * breakpoint.c (update_watchpoint): Update.
        (can_use_hardware_watchpoint): Change "vals" to a std::vector.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.h (free_all_values): Remove.
        * value.c (free_all_values): Remove.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (VALUE_HISTORY_CHUNK, struct value_history_chunk)
        (value_history_chain, value_history_count): Remove.
        (value_history): New global.
        (record_latest_value, access_value_history, show_values)
        (preserve_values): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * varobj.h (struct varobj) <value>: Now a value_ref_ptr.
        * varobj.c (varobj_set_display_format, varobj_set_value)
        (install_default_visualizer, construct_visualizer)
        (install_new_value, ~varobj, varobj_get_value_type)
        (my_value_of_variable, varobj_editable_p): Update.
        * c-varobj.c (c_describe_child, c_value_of_variable)
        (cplus_number_of_children, cplus_describe_child): Update.
        * ada-varobj.c (ada_number_of_children, ada_name_of_child)
        (ada_path_expr_of_child, ada_value_of_child, ada_type_of_child)
        (ada_value_of_variable, ada_value_is_changeable_p): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * printcmd.c (last_examine_address): Change type to
        value_ref_ptr.
        (do_examine, x_command): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * value.c (release_value): Update.
        * breakpoint.h (struct watchpoint) <val>: Now a value_ref_ptr.
        (struct bpstats) <val>: Now a value_ref_ptr.
        * breakpoint.c (update_watchpoint, breakpoint_init_inferior)
        (~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
        (~watchpoint, print_it_watchpoint, watch_command_1)
        (invalidate_bp_value_on_memory_change): Update.

2018-04-06  Tom Tromey  <tom@tromey.com>

        * varobj.c (varobj_clear_saved_item)
        (update_dynamic_varobj_children, install_new_value, ~varobj):
        Update.
        * value.h (value_incref): Move declaration earlier.
        (value_decref): Rename from value_free.
        (struct value_ref_policy): New.
        (value_ref_ptr): New typedef.
        (struct value_deleter): Remove.
        (gdb_value_up): Remove typedef.
        (release_value): Change return type.
        (release_value_or_incref): Remove.
        * value.c (set_value_parent): Update.
        (value_incref): Change return type.
        (value_decref): Rename from value_free.
        (value_free_to_mark, free_all_values, free_value_chain): Update.
        (release_value): Return value_ref_ptr.
        (release_value_or_incref): Remove.
        (record_latest_value, set_internalvar, clear_internalvar):
        Update.
        * stack.c (info_frame_command): Don't call value_free.
        * python/py-value.c (valpy_dealloc, valpy_new)
        (value_to_value_object): Update.
        * printcmd.c (do_examine): Update.
        * opencl-lang.c (lval_func_free_closure): Update.
        * mi/mi-main.c (register_changed_p): Don't call value_free.
        * mep-tdep.c (mep_frame_prev_register): Don't call value_free.
        * m88k-tdep.c (m88k_frame_prev_register): Don't call value_free.
        * m68hc11-tdep.c (m68hc11_frame_prev_register): Don't call
        value_free.
        * guile/scm-value.c (vlscm_free_value_smob)
        (vlscm_scm_from_value): Update.
        * frame.c (frame_register_unwind, frame_unwind_register_signed)
        (frame_unwind_register_unsigned, get_frame_register_bytes)
        (put_frame_register_bytes): Don't call value_free.
        * findvar.c (address_from_register): Don't call value_free.
        * dwarf2read.c (dwarf2_compute_name): Don't call value_free.
        * dwarf2loc.c (entry_data_value_free_closure)
        (value_of_dwarf_reg_entry, free_pieced_value_closure)
        (dwarf2_evaluate_loc_desc_full): Update.
        * breakpoint.c (update_watchpoint, breakpoint_init_inferior)
        (~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
        (~watchpoint, watch_command_1)
        (invalidate_bp_value_on_memory_change): Update.
        * alpha-tdep.c (alpha_register_to_value): Don't call value_free.

2018-04-06  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/23022
        * warning.m4: Add -Wno-error=deprecated-register.
        * configure: Re-generate.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.h: Remove include of "vec.h".

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.c (typep): Remove typedef.
        (find_methods, find_superclass_methods): Take a std::vector.
        (find_method): Use std::vector.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * utils.c (compare_strings): Remove.
        * utils.h (compare_strings): Remove.
        * objc-lang.h (find_imps): Update.
        * objc-lang.c (find_methods): Take a std::vector.
        (uniquify_strings, find_imps): Likewise.
        * linespec.c (find_methods): Take a std::vector.
        (decode_objc): Use std::vector.
        (add_all_symbol_names_from_pspace, find_superclass_methods): Take
        a std::vector.
        (find_method, find_function_symbols): Use std::vector.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * completer.c (completion_tracker::completion_tracker): Remove
        cast.
        (completion_tracker::discard_completions): Likewise.
        * breakpoint.c (ambiguous_names_p): Remove cast.
        * ada-lang.c (_initialize_ada_language): Remove cast.
        * utils.h (streq): Update.
        (streq_hash): Add new declaration.
        * utils.c (streq): Return bool.
        (streq_hash): New function.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.c (event_location_to_sals) <case ADDRESS_LOCATION>:
        Remove a string copy.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.c (filter_results): Use std::vector.
        (decode_line_2, decode_line_full): Update.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.c (canonical_to_fullform): Return std::string.
        (filter_results): Update.
        (struct decode_line_2_item): Add constructor.
        <fullform, displayform>: Now std::string.
        (decode_line_2_compare_items): Now a std::sort comparator.
        (decode_line_2): Update.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.c (copy_token_string): Return a unique_xmalloc_ptr.
        (unexpected_linespec_error): Update.
        (linespec_parse_basic, parse_linespec): Update.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * linespec.c (linespec_parse_basic): Reindent.

2018-04-05  Tom Tromey  <tom@tromey.com>

        * minsyms.h (iterate_over_minimal_symbols): Update.
        * minsyms.c (iterate_over_minimal_symbols): Take a
        gdb::function_view.
        * linespec.c (struct collect_minsyms): Remove.
        (compare_msyms): Now a std::sort comparator.
        (add_minsym): Add parameters.
        (search_minsyms_for_name): Update.  Use std::vector.

2018-04-03  Tom Tromey  <tom@tromey.com>

        * mipsread.c (read_alphacoff_dynamic_symtab): Use
        gdb::byte_vector.

2018-04-02  Weimin Pan  <weimin.pan@oracle.com>

        * MAINTAINERS (Write After Approval): Add Weimin Pan.

2018-04-02  Weimin Pan  <weimin.pan@oracle.com>

        PR gdb/16959
        * cp-valprint.c: (cp_print_static_field) Fix infinite recursion when 
        printing static type.

2018-04-01  Tom Tromey  <tom@tromey.com>

        * rs6000-nat.c (rs6000_ptrace_ldinfo): Return a byte_vector.
        (rs6000_xfer_shared_libraries): Update.

2018-04-01  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/gdb_vecs.h (char_ptr): Remove.
        * tracepoint.c (encode_actions_1): Remove usage of char_ptr.

2018-03-30  Simon Marchi  <simon.marchi@polymtl.ca>

        * guile/scm-utils.c (gdbscm_parse_function_args): Replace VEC
        with std::vector.
        * common/gdb_vecs.h (DEF_VEC_P (char_ptr)): Remove.

2018-03-30  Simon Marchi  <simon.marchi@polymtl.ca>

        * tracepoint.h (struct uploaded_tp): Initialize fields.
        <actions, step_actions, cmd_strings>: Change type to
        std::vector<char *>.
        * tracepoint.c (get_uploaded_tp): Allocate with new.
        (free_uploaded_tps): Free with delete.
        (parse_tracepoint_definition): Adjust to std::vector change.
        * breakpoint.c (read_uploaded_action): Likewise.
        (create_tracepoint_from_upload): Likewise.
        * ctf.c (ctf_write_uploaded_tp): Likewise.
        (SET_ARRAY_FIELD): Likewise.
        * tracefile-tfile.c (tfile_write_uploaded_tp): Likewise.

2018-03-30  Tom Tromey  <tom@tromey.com>

        * solib-svr4.c (lm_info_read): Use gdb::byte_vector.  Return
        std::unique_ptr.
        (svr4_keep_data_in_core): Update.
        (svr4_read_so_list): Update.

2018-03-30  Tom Tromey  <tom@tromey.com>

        * windows-nat.c (handle_output_debug_string, handle_exception):
        Update.
        * target.h (target_read_string): Update.
        * target.c (target_read_string): Change "string" to
        unique_xmalloc_ptr.
        * solib-svr4.c (open_symbol_file_object, svr4_read_so_list):
        Update.
        * solib-frv.c (frv_current_sos): Update.
        * solib-dsbt.c (dsbt_current_sos): Update.
        * solib-darwin.c (darwin_current_sos): Update.
        * linux-thread-db.c (inferior_has_bug): Update.
        * expprint.c (print_subexp_standard) <case OP_OBJC_MSGCALL>:
        Update.  Remove alloca.
        * ada-lang.c (ada_main_name): Update.

2018-03-30  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (struct free_dwo_file_cleanup_data): Remove.
        (struct dwo_file_deleter): New.
        (dwo_file_up): New typedef.
        (open_and_init_dwo_file): Use dwo_file_up.
        (free_dwo_file_cleanup): Remove.

2018-03-30  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (free_dwo_file): Remove "objfile" parameter.
        (free_dwo_file_cleanup, free_dwo_file_from_slot): Update.

2018-03-30  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (class free_cached_comp_units): New class.
        (dw2_instantiate_symtab, dwarf2_build_psymtabs_hard): Use it.
        (free_cached_comp_units): Remove function.

2018-03-30  Tom Tromey  <tom@tromey.com>

        * utils.h (make_cleanup_unpush_target): Remove.
        * inf-ptrace.c (struct target_unpusher): New.
        (target_unpush_up) New typedef.
        (inf_ptrace_create_inferior, inf_ptrace_attach): Use
        target_unpush_up.
        * utils.c (do_unpush_target, make_cleanup_unpush_target): Remove.

2018-03-27  Tom Tromey  <tom@tromey.com>

        * utils.c (prompt_for_continue): Use unique_xmalloc_ptr.

2018-03-27  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tom@tromey.com>

        * top.c (class gdb_readline_wrapper_cleanup): Add constructor,
        destructor.  Now a class.
        (gdb_readline_wrapper_cleanup): Remove function.
        (gdb_readline_wrapper): Remove cleanups.

2018-03-27  Tom Tromey  <tom@tromey.com>

        * typeprint.h (struct type_print_options) <local_typedefs,
        global_typedefs>: Remove "struct" keyword.
        (class typedef_hash_table): New class.
        (recursively_update_typedef_hash, add_template_parameters)
        (create_typedef_hash, free_typedef_hash, copy_typedef_hash)
        (find_typedef_in_hash): Don't declare.
        * typeprint.c (struct typedef_hash_table): Move to typeprint.h.
        (typedef_hash_table::recursively_update): Rename from
        recursively_update_typedef_hash.  Now a member.
        (typedef_hash_table::add_template_parameters): Rename from
        add_template_parameters.  Now a member.
        (typedef_hash_table::typedef_hash_table): Now a constructor;
        rename from create_typedef_hash.
        (typedef_hash_table::~typedef_hash_table): Now a destructor;
        rename from free_typedef_hash.
        (do_free_typedef_hash, make_cleanup_free_typedef_hash)
        (do_free_global_table): Remove.
        (typedef_hash_table::typedef_hash_table): New constructor; renamed
        from copy_type_recursive.
        (create_global_typedef_table): Remove.
        (typedef_hash_table::find_global_typedef): Now a member of
        typedef_hash_table.
        (typedef_hash_table::find_typedef): Rename from
        find_typedef_in_hash; now a member.
        (whatis_exp): Update.
        * extension.h (struct ext_lang_type_printers): Add constructor and
        destructor.
        (start_ext_lang_type_printers, free_ext_lang_type_printers): Don't
        declare.
        * extension.c (ext_lang_type_printers::ext_lang_type_printers):
        Now a constructor; rename from start_ext_lang_type_printers.
        (ext_lang_type_printers): Now a destructor; rename from
        free_ext_lang_type_printers.
        * c-typeprint.c (find_typedef_for_canonicalize, c_print_type_1):
        Update.
        (c_type_print_base_struct_union): Update.  Remove cleanups.

2018-03-27  Tom Tromey  <tom@tromey.com>

        * dwarf-index-write.c: Include <cmath>.

2018-03-27  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Add entry describing new "set|show varsize-limit" command.
        * ada-lang.c (_initialize_ada_language): Add "set/show varsize-limit"
        command.
        * printcmd.c (_initialize_printcmd): Add "set var" alias of
        "set variable".

2018-03-27  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (COMMON_SFILES): Add dwarf-index-common.c and
        dwarf-index-write.c
        (HFILES_NO_SRCDIR): Add dwarf-index-common.h and dwarf2read.h.
        * dwarf-index-common.c: New file.
        * dwarf-index-common.h: New file.
        * dwarf-index-write.c: New file.
        * dwarf2read.c: Include dwarf2read.h and dwarf-index-common.h.
        (struct dwarf2_section_info): Move from here.
        (dwarf2_section_info_def): Likewise.
        (DEF_VEC_O (dwarf2_section_info_def)): Likewise.
        (offset_type): Likewise.
        (DW2_GDB_INDEX_SYMBOL_STATIC_SET_VALUE): Likewise.
        (DW2_GDB_INDEX_SYMBOL_KIND_SET_VALUE): Likewise.
        (DW2_GDB_INDEX_CU_SET_VALUE): Likewise.
        (byte_swap): Likewise.
        (MAYBE_SWAP): Likewise.
        (dwarf2_per_cu_ptr): Likewise.
        (DEF_VEC_P (dwarf2_per_cu_ptr)): Likewise.
        (struct tu_stats): Likewise.
        (struct dwarf2_per_objfile): Likewise.
        (struct dwarf2_per_cu_data): Likewise.
        (struct signatured_type): Likewise.
        (sig_type_ptr): Likewise.
        (DEF_VEC_P (sig_type_ptr)): Likewise.
        (INDEX4_SUFFIX): Likewise.
        (INDEX5_SUFFIX): Likewise.
        (DEBUG_STR_SUFFIX): Likewise.
        (dwarf2_read_section): Make non-static.
        (mapped_index_string_hash): Move from here.
        (dwarf5_djb_hash): Likewise.
        (file_write): Likewise.
        (class data_buf): Likewise.
        (struct symtab_index_entry): Likewise.
        (struct mapped_symtab): Likewise.
        (find_slot): Likewise.
        (hash_expand): Likewise.
        (add_index_entry): Likewise.
        (uniquify_cu_indices): Likewise.
        (class c_str_view): Likewise.
        (class c_str_view_hasher): Likewise.
        (class vector_hasher): Likewise.
        (write_hash_table): Likewise.
        (psym_index_map): Likewise.
        (struct addrmap_index_data): Likewise.
        (add_address_entry): Likewise.
        (add_address_entry_worker): Likewise.
        (write_address_map): Likewise.
        (symbol_kind): Likewise.
        (write_psymbols): Likewise.
        (struct signatured_type_index_data): Likewise.
        (write_one_signatured_type): Likewise.
        (recursively_count_psymbols): Likewise.
        (recursively_write_psymbols): Likewise.
        (class debug_names): Likewise.
        (check_dwarf64_offsets): Likewise.
        (psyms_seen_size): Likewise.
        (write_gdbindex): Likewise.
        (write_debug_names): Likewise.
        (assert_file_size): Likewise.
        (write_psymtabs_to_index): Likewise.
        (save_gdb_index_command): Likewise.
        (_initialize_dwarf2_read): Don't register the "save gdb-index"
        command.
        * dwarf2read.h: New file.

2018-03-27  Joel Brobecker  <brobecker@adacore.com>

        PR gdb/22670
        * dwarf2read.c (dwarf2_physname): Do not return the demangled
        symbol name if the CU's language stores symbol names in linkage
        format.
        * language.h (struct language_defn)
        <la_store_sym_names_in_linkage_form_p>: New field.  Adjust
        all instances of this struct.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * stack.c (backtrace_command_1): Remove verbose code.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (py_print_type): Don't catch
        exceptions.  Return void.
        (py_print_value): Likewise.
        (py_print_single_arg): Likewise.
        (enumerate_args): Don't catch exceptions.
        (py_print_args): Likewise.
        (py_print_frame): Likewise.
        (gdbpy_apply_frame_filter): Catch exceptions here.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * stack.c (_initialize_stack): Remove trailing newlines from help
        text.  Add "Usage" line to "backtrace" help.

2018-03-26  Tom Tromey  <tom@tromey.com>

        PR python/16486:
        * python/py-framefilter.c (py_print_args): Call wrap_hint.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (py_print_single_arg): Return
        EXT_LANG_BT_ERROR from catch.

2018-03-26  Tom Tromey  <tom@tromey.com>

        PR backtrace/15584:
        * stack.c (backtrace_command_1): Move some code into no-filters
        "if".

2018-03-26  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (throw_quit_or_print_exception): New
        function.
        (gdbpy_apply_frame_filter): Use it.

2018-03-26  Tom Tromey  <tom@tromey.com>

        PR cli/17716:
        * python/py-framefilter.c (py_print_type, py_print_value)
        (enumerate_args, py_print_args, gdbpy_apply_frame_filter): Use
        RETURN_MASK_ERROR.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (enumerate_args): Use
        gdb::unique_xmalloc_ptr.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * python/py-framefilter.c (py_print_frame): Return
        EXT_LANG_BT_OK.
        (gdbpy_apply_frame_filter): Update comment.
        * extension.h (enum ext_lang_bt_status) <EXT_LANG_BT_COMPLETED>:
        Remove.
        <EXT_LANG_BT_NO_FILTERS>: Change value.

2018-03-26  Tom Tromey  <tom@tromey.com>

        PR backtrace/15582:
        * stack.c (backtrace_command): Parse "hide" argument.
        * python/py-framefilter.c (py_print_frame): Handle PRINT_HIDE.
        * extension.h (enum frame_filter_flags) <PRINT_HIDE>: New
        constant.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * stack.c (backtrace_command_1): Remove "show_locals" parameter,
        add "flags".
        (backtrace_command): Remove "fulltrace", add "flags".

2018-03-26  Tom Tromey  <tom@tromey.com>

        * stack.c (backtrace_command): Rewrite command line parsing.

2018-03-26  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (DEF_VEC_I(offset_type)): Remove.

2018-03-26  Simon Marchi  <simon.marchi@ericsson.com>

        * filename-seen-cache.h: Add include guard.

2018-03-26  Keith Seitz  <keiths@redhat.com>

        * symfile.c (place_section): Remove "struct" from section_addr_info
        in comment.
        * windows-nat.c (struct safe_symbol_file_add_args) <addrs>: Remove
        "struct" keyword from section_addr_info.

2018-03-26  Alan Hayward  <alan.hayward@arm.com>

        * regformats/regdef.h (reg): Add constructors.

2018-03-25  Pedro Alves  <palves@redhat.com>

        * eval.c (evaluate_funcall): Swap OP_VAR_MSYM_VALUE/OP_VAR_VALUE
        if then/else bodies in var_func_name extraction.

2018-03-23  Weimin Pan  <weimin.pan@oracle.com>

        * minsyms.c (lookup_minimal_symbol_and_objfile): Use
        lookup_minimal_symbol() to find symbol entry.
        * minsyms.h (lookup_minimal_symbol_and_objfile): Update comment.

2018-03-23  Keith Seitz  <keiths@redhat.com>

        PR c++/22968
        * dwarf2read.c (scan_partial_symbols): Scan structs/classes for
        nested type definitions for C++, too.

2018-03-23  Tom Tromey  <tom@tromey.com>

        * machoread.c (struct oso_el): Add a constructor.  Don't define as
        a typedef.
        (macho_register_oso): Remove.
        (macho_symtab_read): Take a std::vector.
        (oso_el_compare_name): Now a std::sort comparator.
        (macho_symfile_read_all_oso): Take a std::vector.
        (macho_symfile_read): Use std::vector.  Remove cleanups.

2018-03-22  Tom Tromey  <tom@tromey.com>

        * record-full.c (record_full_exec_insn): Use gdb::byte_vector.
        (record_full_goto_bookmark): Use std::string.

2018-03-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        PR tdep/18295
        * rs6000-tdep.c (skip_prologue): Match both stwux and stdux
        a single mask.

2018-03-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * rs6000-tdep.c (store_insn_p): New function.
        (skip_prologue): New variable alloca_reg_offset. Set lr_reg
        and cr_reg to their unshifted values. Use store_insn_p to
        match LR saves using either R1 or fdata->alloca_reg. Use
        store_insn_p to match CR saves. Set alloca_reg_offset
        when alloca_reg and framep are set. Remove lr_reg shift
        when assigning to fdata->lr_register.

2018-03-22  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-tdep.c (linux_info_proc): For "info proc cmdline", print
        command line args instead of emitting a warning.

2018-03-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * tracepoint.h (struct static_tracepoint_marker): Initialize
        fields, define default constructor, move constructor and move
        assignment, disable the rest.
        <str_id, extra>: Make std::string.
        (release_static_tracepoint_marker): Remove.
        (free_current_marker): Remove.
        * tracepoint.c (free_current_marker): Remove.
        (parse_static_tracepoint_marker_definition): Adjust to
        std::string, use new hex2str overload.
        (release_static_tracepoint_marker): Remove.
        (print_one_static_tracepoint_marker): Get marker by reference
        and adjust to std::string.
        (info_static_tracepoint_markers_command): Adjust to std::vector
        changes
        * target.h (static_tracepoint_marker_p): Remove typedef.
        (DEF_VEC_P(static_tracepoint_marker_p)): Remove.
        (struct target_ops) <to_static_tracepoint_marker_at>: Return
        bool.
        <to_static_tracepoint_markers_by_strid>: Return std::vector.
        * target-debug.h
        (target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
        (target_debug_print_std_vector_static_tracepoint_marker): New.
        (target_debug_print_struct_static_tracepoint_marker_p): Rename
        to...
        (target_debug_print_static_tracepoint_marker_p): ... this.
        * target-delegates.c: Re-generate.
        * breakpoint.h (struct tracepoint) <static_trace_marker_id>:
        Make std::string.
        * breakpoint.c (init_breakpoint_sal): Adjust to std::string.
        (decode_static_tracepoint_spec): Adjust to std::vector.
        (tracepoint_print_one_detail): Adjust to std::string.
        (strace_marker_decode_location): Adjust to std::string.
        (update_static_tracepoint): Adjust to std::string, remove call
        to release_static_tracepoint_marker.
        * linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
        Adjust to std::vector.
        * remote.c (remote_static_tracepoint_marker_at): Return bool.
        (remote_static_tracepoint_markers_by_strid): Adjust to
        std::vector.
        * common/rsp-low.h (hex2str): New overload with explicit count
        of bytes.
        * common/rsp-low.c (hex2str): New overload with explicit count
        of bytes.
        * unittests/rsp-low-selftests.c (test_hex2str): New function.
        (_initialize_rsp_low_selftests): Add test_hex2str test.
        * unittests/tracepoint-selftests.c
        (test_parse_static_tracepoint_marker_definition): Adjust to
        std::string.

2018-03-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * tracepoint.c (parse_static_tracepoint_marker_definition):
        Consider case where the definition is followed by more
        definitions.
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        tracepoint-selftests.c.
        * unittests/tracepoint-selftests.c: New.

2018-03-21  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * MAINTAINERS (Write After Approval): Add Pedro Franco de
        Carvalho.

2018-03-20  Stephen Roberts  <stephen.roberts@arm.com>

        * symtab.c (find_pc_sect_line): fixed indentation.

2018-03-20  Stephen Roberts  <stephen.roberts@arm.com>

        * symtab.c (find_pc_sect_line): now uses binary search.

2018-03-19  Tom Tromey  <tom@tromey.com>

        * rust-exp.y (struct_expr_tail, struct_expr_list): Add plain
        "IDENT" production.

2018-03-19  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tom@tromey.com>

        * unittests/observable-selftests.c: New file.
        * common/observable.h: New file.
        * observable.h: New file.
        * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
        arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
        breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
        corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
        extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
        infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
        linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
        mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
        ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
        python/py-breakpoint.c, python/py-finishbreakpoint.c,
        python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
        record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
        riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
        spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
        symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
        tui/tui-interp.c, valops.c: Update all users.
        * tui/tui-hooks.c (tui_bp_created_observer)
        (tui_bp_deleted_observer, tui_bp_modified_observer)
        (tui_inferior_exit_observer, tui_before_prompt_observer)
        (tui_normal_stop_observer, tui_register_changed_observer):
        Remove.
        (tui_observers_token): New global.
        (attach_or_detach, tui_attach_detach_observers): New functions.
        (tui_install_hooks, tui_remove_hooks): Use
        tui_attach_detach_observers.
        * record-btrace.c (record_btrace_thread_observer): Remove.
        (record_btrace_thread_observer_token): New global.
        * observer.sh: Remove.
        * observer.c: Rename to observable.c.
        * observable.c (namespace gdb_observers): Define new objects.
        (observer_debug): Move into gdb_observers namespace.
        (struct observer, struct observer_list, xalloc_observer_list_node)
        (xfree_observer_list_node, generic_observer_attach)
        (generic_observer_detach, generic_observer_notify): Remove.
        (_initialize_observer): Update.
        Don't include observer.inc.
        * Makefile.in (generated_files): Remove observer.h, observer.inc.
        (clean mostlyclean): Likewise.
        (observer.h, observer.inc): Remove targets.
        (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
        (COMMON_SFILES): Use observable.c, not observer.c.
        * .gitignore: Remove observer.h.

2018-03-18  Tom Tromey  <tom@tromey.com>

        * solib.c (gdb_bfd_lookup_symbol_from_symtab): Use
        gdb::def_vector.
        (bfd_lookup_symbol_from_dyn_symtab): Likewise.

2018-03-17  Tom Tromey  <tom@tromey.com>

        * auto-load.c (auto_load_objfile_script_1): Use std::string.

2018-03-17  Tom Tromey  <tom@tromey.com>

        * target.c (class scoped_target_fd): New.
        (target_fileio_close_cleanup): Remove.
        (target_fileio_read_alloc_1): Use scoped_target_fd.

2018-03-16  Simon Marchi  <simon.marchi@polymtl.ca>

        * silent-rules.mk: New.
        * Makefile.in: Include silent-rules.mk
        (srcdir, VPATH, top_srcdir): Move up.
        (COMPILE): Add ECHO_CXX.
        (test-cp-name-parser$(EXEEXT)): Add ECHO_CXXLD.
        (init.c): Add ECHO_INIT_C.
        (gdb$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
        (version.c): Add ECHO_GEN.
        (printcmd.o): Add ECHO_CXX.
        (target-float.o): Add ECHO_CXX.
        (ada-exp.o): Add ECHO_CXX.
        (stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN.
        (insight$(EXEEXT)): Add ECHO_CXXLD.
        * gnulib/configure.ac: Add AM_SILENT_RULES.
        * gnulib/aclocal.m4: Re-generate.
        * gnulib/configure: Re-generate.
        * gnulib/import/Makefile.in: Re-generate.

2018-03-16  Tom Tromey  <tom@tromey.com>

        * xcoffread.c (xcoff_symfile_offsets): Change type of "addrs".
        * utils.h (make_cleanup_free_section_addr_info): Don't declare.
        * utils.c (do_free_section_addr_info)
        (make_cleanup_free_section_addr_info): Remove.
        * symfile.h (struct other_sections): Add constructor.
        (struct section_addr_info): Remove.
        (section_addr_info): New typedef.
        (struct sym_fns) <sym_offsets>: Change type of parameter.
        (build_section_addr_info_from_objfile)
        (relative_addr_info_to_section_offsets, addr_info_make_relative)
        (default_symfile_offsets, symbol_file_add)
        (symbol_file_add_from_bfd)
        (build_section_addr_info_from_section_table): Update.
        (alloc_section_addr_info, free_section_addr_info): Don't declare.
        * symfile.c (alloc_section_addr_info): Remove.
        (build_section_addr_info_from_section_table): Change return type.
        Update.
        (build_section_addr_info_from_bfd)
        (build_section_addr_info_from_objfile): Likewise.
        (free_section_addr_info): Remove.
        (relative_addr_info_to_section_offsets): Change type of "addrs".
        (addrs_section_compar): Now a std::sort comparator.
        (addrs_section_sort): Change return type.
        (addr_info_make_relative): Change type of "addrs".  Update.
        (default_symfile_offsets, syms_from_objfile_1)
        (syms_from_objfile, symbol_file_add_with_addrs): Likewise.
        (symbol_file_add_separate): Update.
        (symbol_file_add): Change type of "addrs".  Update.
        (add_symbol_file_command): Update.  Remove cleanups.
        * symfile-mem.c (symbol_file_add_from_memory): Update.  Remove
        cleanups.
        * symfile-debug.c (debug_sym_offsets): Change type of "info".
        * solib.c (solib_read_symbols): Update.
        * objfiles.c (objfile_relocate): Update.  Remove cleanups.
        * machoread.c (macho_symfile_offsets): Update.
        * jit.c (jit_bfd_try_read_symtab): Update.

2018-03-15  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/utils-selftests.c.
        * unittests/utils-selftests.c: New file.

2018-03-14  Tom Tromey  <tom@tromey.com>

        PR cli/14977:
        * printcmd.c (printf_c_string, printf_wide_c_string): Special case
        for NULL.

2018-03-14  Tom Tromey  <tom@tromey.com>

        PR cli/19918:
        * printcmd.c (printf_pointer): Allow "-" in format.

2018-03-14  Tom Tromey  <tom@tromey.com>

        * printcmd.c (_initialize_printcmd): Add usage to printf.

2018-03-14  Yao Qi  <qiyao@sourceware.org>

        * MAINTAINERS: Update my email address.

2018-03-13  Tom Tromey  <tom@tromey.com>

        * machoread.c (macho_check_dsym): Change filenamep to a
        std::string*.
        (macho_symfile_read): Update.
        * symfile.c (load_command): Use std::string.

2018-03-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_sw_breakpoint_from_kind): Add localization
        to error message string.
        (riscv_register_name): Use xsnprintf instead of sprintf.
        (riscv_insn::fetch_instruction): Use gdb_assert instead of
        internal_error.
        (riscv_print_arg_location): Use gdb_assert_not_reached instead of
        error.
        (riscv_push_dummy_call): Likewise.

2018-03-12  Tom Tromey  <tom@tromey.com>

        * rs6000-aix-tdep.c (rs6000_aix_core_xfer_shared_libraries_aix):
        Use gdb::byte_vector.
        * arm-tdep.c (arm_exidx_new_objfile): Use gdb::byte_vector.

2018-03-12  Yao Qi  <yao.qi@linaro.org>

        * ia64-libunwind-tdep.c (libunwind_get_reg_special): Change
        parameter type to readable_regcache.
        * ia64-libunwind-tdep.h (libunwind_get_reg_special): Update
        the declaration.

2018-03-11  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (struct nextfield): Add initializers.
        (struct nextfnfield): Remove.
        (struct fnfieldlist): Add initializers.  Remove "length" and
        "head", use std::vector.
        (struct decl_field_list): Remove.
        (struct field_info): Add initializers.
        <fields, baseclasses>: Now std::vector.
        <nbaseclasses, nfnfields, typedef_field_list_count,
        nested_types_list_count>: Remove.
        (dwarf2_add_field, dwarf2_add_type_defn)
        (dwarf2_attach_fields_to_type, dwarf2_add_member_fn)
        (dwarf2_attach_fn_fields_to_type, handle_struct_member_die)
        (process_structure_scope): Update.

2018-03-11  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (sort_tu_by_abbrev_offset): Change to be suitable
        for use by std::sort.
        (build_type_psymtabs_1): Use std::vector.

2018-03-09  Eli Zaretskii  <eliz@gnu.org>

        * top.c (print_gdb_configuration): Reflect LIBIPT, LIBMEMCHECK,
        and LIBMPFR in the printed configuration.

2018-03-08  Tom Tromey  <tom@tromey.com>

        * source.c (get_filename_and_charpos): Use scoped_fd.
        * nto-procfs.c (procfs_open_1): Use scoped_fd.
        (procfs_pidlist): Likewise.
        * procfs.c (proc_get_LDT_entry): Use scoped_fd.
        (iterate_over_mappings): Likewise.

2018-03-08  Tom Tromey  <tom@tromey.com>

        * infcall.c (struct call_return_meta_info)
        <stack_temporaries_enabled>: Remove.
        (get_call_return_value, call_function_by_hand_dummy): Update.
        * thread.c (disable_thread_stack_temporaries): Remove.
        (enable_thread_stack_temporaries): Remove.
        (thread_stack_temporaries_enabled_p): Return bool.
        (push_thread_stack_temporary, value_in_thread_stack_temporaries)
        (get_last_thread_stack_temporary): Update.
        * eval.c (evaluate_subexp): Update.
        * gdbthread.h (class enable_thread_stack_temporaries): Now a
        class, not a function.
        (value_ptr, value_vec): Remove typedefs.
        (class thread_info) <stack_temporaries_enabled>: Now bool.
        <stack_temporaries>: Now a std::vector.
        (thread_stack_temporaries_enabled_p)
        (value_in_thread_stack_temporaries): Return bool.

2018-03-08  Simon Marchi  <simon.marchi@ericsson.com>

        * remote.c (putpkt_binary): Fix omitted bytes reporting.
        (getpkt_or_notif_sane_1): Likewise.

2018-03-08  Simon Marchi  <simon.marchi@polymtl.ca>

        * build-id.c (build_id_to_debug_bfd): Use std::string.

2018-03-08  Simon Marchi  <simon.marchi@polymtl.ca>

        * build-id.c (find_separate_debug_file_by_buildid): Return
        std::string.
        * build-id.h (find_separate_debug_file_by_buildid): Return
        std::string.
        * coffread.c (coff_symfile_read): Adjust to std::string.
        * elfread.c (elf_symfile_read): Adjust to std::string.
        * symfile.c (separate_debug_file_exists): Change parameter to
        std::string.
        (find_separate_debug_file): Return std::string.
        (find_separate_debug_file_by_debuglink): Return std::string.
        * symfile.h (find_separate_debug_file_by_debuglink): Return
        std::string.

2018-03-08  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/xml-utils.c (xml_escape_text): Move code to...
        (xml_escape_text_append): ... this new function.
        * common/xml-utils.h (xml_escape_text_append): New declaration.
        * unittests/xml-utils-selftests.c (test_xml_escape_text_append):
        New function.
        (_initialize_xml_utils): register test_xml_escape_text_append as
        a selftest.

2018-03-07  Alan Hayward  <alan.hayward@arm.com>

        * defs.h: Remove MAX_REGISTER_SIZE.
        * regcache.c (init_regcache_descr): Remove MAX_REGISTER_SIZE
        asserts.
        * python/py-unwind.c (pyuw_sniffer): Likewise.

2018-03-07  Tom Tromey  <tom@tromey.com>

        * linux-tdep.c (linux_info_proc): Update.
        * target.h (struct target_ops) <to_fileio_readlink>: Return
        optional<string>.
        (target_fileio_readlink): Return optional<string>.
        * remote.c (remote_hostio_readlink): Return optional<string>.
        * inf-child.c (inf_child_fileio_readlink): Return
        optional<string>.
        * target.c (target_fileio_readlink): Return optional<string>.

2018-03-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * regcache.c (cooked_read_test): Add riscv to the list of
        architectures that have a save_reggroup.

2018-03-07  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gnu-v3-abi.c (gnuv3_rtti_type): Add early exit if the given
        value is not a dynamic class object.

2018-03-06  Tom Tromey  <tom@tromey.com>

        * rust-exp.y: Formatting fixes.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_register_name): Remove target description
        support.
        (riscv_gdbarch_init): Remove target description check.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c: Remove 'Contributed by ...' lines from header
        comment.
        * riscv-tdep.h: Likewise.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_pseudo_register_read): Delete.
        (riscv_pseudo_register_write): Delete.
        (riscv_gdbarch_init): Remove all use of pseudo registers.

2018-03-06  Simon Marchi  <simon.marchi@polymtl.ca>

        * record-btrace.c (btrace_print_lines): Replace cleanup
        parameter with RAII equivalents.
        (btrace_insn_history): Replace cleanup with RAII equivalents.
        * ui-out.h (make_cleanup_ui_out_list_begin_end,
        make_cleanup_ui_out_tuple_begin_end): Remove.
        * ui-out.c (struct ui_out_end_cleanup_data, do_cleanup_end,
        make_cleanup_ui_out_end, make_cleanup_ui_out_tuple_begin_end,
        make_cleanup_ui_out_list_begin_end): Remove.

2018-03-06  Simon Marchi  <simon.marchi@polymtl.ca>

        * record-btrace.c (record_btrace_maybe_mark_async_event): Change
        parameter types to std::vector.  Use bool.
        (record_btrace_wait): Replace VEC(tp_t) with
        std::vector<thread_info *>.
        * common/gdb_vecs.h (unordered_remove, ordered_remove): New.

2018-03-06  Simon Marchi  <simon.marchi@polymtl.ca>

        * record-btrace.c (record_btrace_disable_callback): Remove.
        (struct scoped_btrace_disable): New.
        (record_btrace_open): Use scoped_btrace_disable.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_return_value): Change type to ULONGEST for
        reading values from registers.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_push_dummy_call): Use core_addr_to_string_nz
        where appropriate.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * riscv-tdep.c (riscv_print_arg_location): Add header comment,
        change parameter type.  Use GDB's print functions, and use
        core_addr_to_string where appropriate.
        (riscv_push_dummy_call): Use core_addr_to_string where
        appropriate, update call to riscv_print_arg_location, and reindent
        a few lines.
        (riscv_return_value): Update call to riscv_print_arg_location.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>
            Tim Newsome <tim@sifive.com>
            Albert Ou <a0u@eecs.berkeley.edu>
            Darius Rad <darius@bluespec.com>

        * Makefile.in (ALL_TARGET_OBS): Add riscv-tdep.o
        (HFILES_NO_SRCDIR): Add riscv-tdep.h.
        (ALLDEPFILES): Add riscv-tdep.c
        * configure.tgt: Add riscv support.
        * riscv-tdep.c: New file.
        * riscv-tdep.h: New file.
        * NEWS: Mention new target.
        * MAINTAINERS: Add entry for riscv.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * amd64-tdep.c (amd64_classify_aggregate): Ignore zero sized
        fields within aggregates.

2018-03-04  Simon Marchi  <simon.marchi@polymtl.ca>

        * record-btrace.c (btrace_print_lines): Change type of flags to
        gdb_disassembly_flags.

2018-03-04  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c: Include "inf-ptrace.h".
        (USE_SIGTRAP_SIGINFO): Conditionally define.
        [USE_SIGTRAP_SIGINFO] (fbsd_handle_debug_trap): New function.
        (fbsd_wait) [USE_SIGTRAP_SIGINFO]: Call "fbsd_handle_debug_trap".
        [USE_SIGTRAP_SIGINFO] (fbsd_stopped_by_sw_breakpoint): New
        function.
        [USE_SIGTRAP_SIGINFO] (fbsd_supports_stopped_by_sw_breakpoint):
        Likewise.
        [USE_SIGTRAP_SIGINFO] (fbsd_supports_stopped_by_hw_breakpoint):
        Likewise.
        (fbsd_nat_add_target) [USE_SIGTRAP_SIGINFO]: Set
        "stopped_by_sw_breakpoint", "supports_stopped_by_sw_breakpoint",
        "supports_stopped_by_hw_breakpoint" target methods.

2018-03-04  John Baldwin  <jhb@FreeBSD.org>

        * NEWS (Changes since GDB 8.1): Add "set/show debug fbsd-nat".
        * fbsd-nat.c (debug_fbsd_nat): New variable.
        (show_fbsd_nat_debug): New function.
        (fbsd_wait): Log LWP info if "debug_fbsd_nat" is enabled.
        (_initialize_fbsd_nat): Add "fbsd-nat" debug boolean command.

2018-03-04  John Baldwin  <jhb@FreeBSD.org>

        * nat/x86-dregs.c (x86_dr_stopped_by_hw_breakpoint): New function.
        * nat/x86-dregs.h (x86_dr_stopped_by_hw_breakpoint): New
        prototype.
        * x86-nat.c (x86_stopped_by_hw_breakpoint): New function.
        (x86_use_watchpoints): Set "stopped_by_hw_breakpoint" target
        method.

2018-03-02  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/gdb_vecs.c (free_char_ptr_vec): Remove.
        * common/gdb_vecs.h (free_char_ptr_vec): Remove.

2018-03-02  Simon Marchi  <simon.marchi@polymtl.ca>

        * charset.c (struct charset_vector): New.
        (charsets): Change type to charset_vector.
        (find_charset_names): Adjust.
        (add_one): Adjust.
        (_initialize_charset): Adjust.

2018-03-02  Simon Marchi  <simon.marchi@polymtl.ca>

        * progspace.h (struct program_space) <deleted_solibs>: Change
        type to std::vector<std::string>.
        * progspace.c (clear_program_space_solib_cache): Adjust.
        * breakpoint.c (print_solib_event): Adjust.
        (check_status_catch_solib): Adjust.
        * solib.c (update_solib_list): Adjust.
        * ui-out.h (class ui_out) <field_string>: New overload.
        * ui-out.c (ui_out::field_string): New overload.

2018-03-02  Simon Marchi  <simon.marchi@polymtl.ca>

        * progspace.h (struct program_space): Add constructor and
        destructor, initialize fields.
        (add_program_space): Remove.
        * progspace.c (add_program_space): Rename to...
        (program_space::program_space): ... this.
        (release_program_space): Rename to...
        (program_space::~program_space): ... this.
        (delete_program_space): Use delete to delete program_space.
        (initialize_progspace): Use new to allocate program_space.
        * inferior.c (add_inferior_with_spaces): Likewise.
        (clone_inferior_command): Likewise.
        * infrun.c (follow_fork_inferior): Likewise.
        (handle_vfork_child_exec_or_exit): Likewise.

2018-03-02  Simon Marchi  <simon.marchi@polymtl.ca>

        * common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove.
        (delim_string_to_char_ptr_vec): Return std::vector of
        gdb::unique_xmalloc_ptr.
        (dirnames_to_char_ptr_vec_append): Take std::vector of
        gdb::unique_xmalloc_ptr.
        (dirnames_to_char_ptr_vec): Return std::vector of
        gdb::unique_xmalloc_ptr.
        * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append):
        Take std::vector of gdb::unique_xmalloc_ptr, adjust the code.
        (delim_string_to_char_ptr_vec): Return an std::vector of
        gdb::unique_xmalloc_ptr, adjust the code.
        (dirnames_to_char_ptr_vec_append): Take an std::vector of
        gdb::unique_xmalloc_ptr, adjust the code.
        (dirnames_to_char_ptr_vec): Return an std::vector of
        gdb::unique_xmalloc_ptr, adjust the code.
        * auto-load.c (auto_load_safe_path_vec): Change type to
        std::vector of gdb::unique_xmalloc_ptr.
        (auto_load_expand_dir_vars): Return an std::vector of
        gdb::unique_xmalloc_ptr, adjust the code.
        (auto_load_safe_path_vec_update): Adjust.
        (filename_is_in_auto_load_safe_path_vec): Adjust.
        (auto_load_objfile_script_1): Adjust.
        * build-id.c (build_id_to_debug_bfd): Adjust.
        * linux-thread-db.c (thread_db_load_search): Adjust.
        * source.c (add_path): Adjust.
        (openp): Adjust.
        * symfile.c (find_separate_debug_file): Adjust.
        * utils.c (do_free_char_ptr_vec): Remove.
        (make_cleanup_free_char_ptr_vec): Remove.

2018-03-01  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/22907
        * common/pathstuff.c: Conditionally include "<windows.h>".

2018-03-01  Georg Sauthoff  <mail@georg.so>

        PR gdb/22888
        * gcore.in: Quote variables and switch interpreter to bash.

2018-03-01  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (alloc_discriminant_info): Fix default_index
        assertion.  Add assertion for discriminant_index.
        (quirk_rust_enum): Use correct base type name in univariant case.

2018-03-01  Simon Marchi  <simon.marchi@ericsson.com>

        * record.c (get_call_history_modifiers): Return a
        record_print_flags.
        (cmd_record_call_history): Adjust.
        * record-btrace.c (record_btrace_call_history): Adjust.
        (record_btrace_call_history_range): Adjust.
        (record_btrace_call_history_from): Adjust.
        * target-debug.h (target_debug_print_record_print_flags): New.
        * target-delegates.c: Re-generate.
        * target.c (target_call_history): Change flags type.
        (target_call_history_from): Likewise.
        (target_call_history_range): Likewise.
        * target.h (struct target_ops) <target_call_history>: Likewise.
        (target_call_history_from): Likewise.
        (target_call_history_range): Likewise.

2018-02-28  Sergio Durigan Junior  <sergiodj@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * common/common-utils.c: Include "sys/stat.h".
        (is_regular_file): Move here from "source.c"; change return
        type to "bool".
        * common/common-utils.h (is_regular_file): New prototype.
        * common/pathstuff.c (contains_dir_separator): New function.
        * common/pathstuff.h (contains_dir_separator): New prototype.
        * source.c: Don't include "sys/stat.h".
        (is_regular_file): Move to "common/common-utils.c".

2018-02-28  Sergio Durigan Junior  <sergiodj@redhat.com>

        * Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
        (HFILES_NO_SRCDIR): Add "common/pathstuff.h".
        * auto-load.c: Include "common/pathstuff.h".
        * common/common-def.h (current_directory): Move here.
        * common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
        function.
        * common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
        prototype.
        * common/pathstuff.c: New file.
        * common/pathstuff.h: New file.
        * compile/compile.c: Include "common/pathstuff.h".
        * defs.h (current_directory): Move to "common/common-defs.h".
        * dwarf2read.c: Include "common/pathstuff.h".
        * exec.c: Likewise.
        * guile/scm-safe-call.c: Likewise.
        * linux-thread-db.c: Likewise.
        * main.c: Likewise.
        * nto-tdep.c: Likewise.
        * objfiles.c: Likewise.
        * source.c: Likewise.
        * symtab.c: Likewise.
        * utils.c: Include "common/pathstuff.h".
        (gdb_realpath): Move to "common/pathstuff.c".
        (gdb_realpath_keepfile): Likewise.
        (gdb_abspath): Likewise.
        * utils.h (gdb_realpath): Move to "common/pathstuff.h".
        (gdb_realpath_keepfile): Likewise.
        (gdb_abspath): Likewise.

2018-02-28  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_resume): Use PT_SETSTEP for stepping and a
        wildcard process pid for super_resume for kernels with a
        specific bug.

2018-02-27  Phil Muldoon  <pmuldoon@redhat.com>

        * compile/compile.c (get_args): Add additional comments
        explaining function.

2018-02-27  Simon Marchi  <simon.marchi@polymtl.ca>
            Tom Tromey  <tom@tromey.com>

        * target.h (memory_write_request_s): Remove typedef.  Don't define
        VEC.
        (target_write_memory_blocks): Change argument to std::vector.
        (struct memory_write_request): Add constructor.
        * target-memory.c (compare_block_starting_address): Return bool.
        Change argument types.
        (claim_memory): Change arguments to use std::vector.
        (split_regular_and_flash_blocks, blocks_to_erase)
        (compute_garbled_blocks): Likewise.
        (cleanup_request_data, cleanup_write_requests_vector): Remove.
        (target_write_memory_blocks): Change argument to std::vector.
        * symfile.c (struct load_section_data): Add constructor and
        destructor.  Use std::vector for "requests".
        (struct load_progress_data): Add initializers.
        (load_section_callback): Update.  Use "new".
        (clear_memory_write_data): Remove.
        (generic_load): Update.

2018-02-27  Alan Hayward  <alan.hayward@arm.com>

        * arch/aarch64.h: Use common/tdesc.h.

2018-02-26  Maciej W. Rozycki  <macro@mips.com>

        * mips-tdep.c (mips_gdbarch_init): Don't use a 32-bit BFD
        architecture with a 64-bit ABI.

2018-02-26  Maciej W. Rozycki  <macro@mips.com>

        * gdb/mips-tdep.c (mips_gdbarch_init): Reorder ABI determination
        ahead of target description loading.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * stack.c (backtrace_command_1): Update.
        * python/python-internal.h (gdbpy_apply_frame_filter): Change type
        of "flags".
        * python/py-framefilter.c (py_print_frame)
        (gdbpy_apply_frame_filter): Change type of "flags".
        * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): Change type
        of "flags".
        (mi_cmd_stack_list_frames, mi_cmd_stack_list_locals)
        (mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Update.
        * extension.h (enum frame_filter_flag): Rename from
        frame_filter_flags.
        (frame_filter_flags): Define using DEF_ENUM_FLAGS_TYPE.
        (apply_ext_lang_frame_filter): Change type of "flags".
        * extension.c (apply_ext_lang_frame_filter): Change type of
        "flags".
        * extension-priv.h (struct extension_language_ops)
        <apply_frame_filter>: Change type of "flags".

2018-02-26  Tom Tromey  <tom@tromey.com>

        PR python/16497:
        * stack.c (backtrace_command_1): Set PRINT_MORE_FRAMES flag.  Fix
        off-by-one in py_end computation.
        * python/py-framefilter.c (gdbpy_apply_frame_filter): Handle
        PRINT_MORE_FRAMES.
        * extension.h (enum frame_filter_flags) <PRINT_MORE_FRAMES>: New
        constant.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (struct variant_field): New.
        (struct nextfield) <variant>: New field.
        (dwarf2_add_field): Handle DW_TAG_variant_part.
        (dwarf2_attach_fields_to_type): Attach a discriminant_info to a
        discriminated union.
        (read_structure_type): Handle DW_TAG_variant_part.
        (handle_struct_member_die): New function, extracted from
        process_structure_scope.  Handle DW_TAG_variant.
        (process_structure_scope): Handle discriminated unions.  Call
        handle_struct_member_die.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * rust-lang.h (rust_last_path_segment): Declare.
        * rust-lang.c (rust_last_path_segment): Now public.  Change
        contract.
        (struct disr_info): Remove.
        (RUST_ENUM_PREFIX, RUST_ENCODED_ENUM_REAL)
        (RUST_ENCODED_ENUM_HIDDEN, rust_union_is_untagged)
        (rust_get_disr_info, rust_tuple_variant_type_p): Remove.
        (rust_enum_p, rust_enum_variant): New function.
        (rust_underscore_fields): Remove "offset" parameter.
        (rust_print_enum): New function.
        (rust_val_print) <TYPE_CODE_UNION>: Remove enum code.
        <TYPE_CODE_STRUCT>: Call rust_print_enum when appropriate.
        (rust_print_struct_def): Add "for_rust_enum" parameter.  Handle
        enums.
        (rust_internal_print_type): New function, from rust_print_type.
        Remove enum code.
        (rust_print_type): Call rust_internal_print_type.
        (rust_evaluate_subexp) <STRUCTOP_ANONYMOUS, STRUCTOP_STRUCT>:
        Update enum handling.
        * dwarf2read.c (struct dwarf2_cu) <rust_unions>: New field.
        (rust_fully_qualify, alloc_discriminant_info, quirk_rust_enum)
        (rust_union_quirks): New functions.
        (process_full_comp_unit, process_full_type_unit): Call
        rust_union_quirks.
        (process_structure_scope): Update rust_unions if necessary.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * value.h (value_union_variant): Declare.
        * valops.c (value_union_variant): New function.
        * gdbtypes.h (TYPE_FLAG_DISCRIMINATED_UNION): New macro.
        (struct discriminant_info): New.
        (enum dynamic_prop_node_kind) <DYN_PROP_DISCRIMINATED>: New
        enumerator.
        (struct main_type) <flag_discriminated_union>: New field.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/unpack-selftests.c.
        * unittests/unpack-selftests.c: New file.
        * value.c (unpack_bits_as_long): Fix bugs in non-bitfield cases.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (struct partial_die_info) <read>: New method.
        (read_partial_die): Remove the declaration.
        (load_partial_dies): Update.
        (partial_die_info::partial_die_info):
        (read_partial_die): Change it to partial_die_info::read.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (struct partial_die_info) <fixup>: New method.
        (fixup_partial_die): Remove declaration.
        (scan_partial_symbols): Update.
        (partial_die_parent_scope): Likewise.
        (partial_die_full_name): Likewise.
        (fixup_partial_die): Change it to partial_die_info::fixup.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (read_partial_die): Update the declaration.
        (load_partial_dies): Caller update.
        (read_partial_die): Remove one argument abbrev_len.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (struct partial_die_info): Add ctor, delete
        assignment operator.
        (load_partial_dies): Use ctor and copy ctor.
        (read_partial_die): Update.
        (dwarf2_cu::find_partial_die): Use ctor.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (struct dwarf2_cu) <find_partial_die>: New method.
        (find_partial_die_in_comp_unit): Change it to
        dwarf2_cu::find_partial_die.
        (find_partial_die): Update.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (read_partial_die): Remove the code checking abbrev
        is NULL.

2018-02-26  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (load_partial_dies): Move the location of XOBNEW.

2018-02-26  Alan Hayward  <alan.hayward@arm.com>

        * arch/amd64.h: Use common/tdesc.h.
        * arch/i386.c: Likewise.
        * arch/i386.h: Likewise.
        * arch/tic6x.c: Likewise.
        * arch/tdesc.h: Move file from here...
        * common/tdesc.h: ...to here.
        * features/aarch64-core.c: Regenerate.
        * features/aarch64-fpu.c: Regenerate.
        * features/i386/32bit-avx.c: Regenerate.
        * features/i386/32bit-avx512.c: Regenerate.
        * features/i386/32bit-core.c: Regenerate.
        * features/i386/32bit-linux.c: Regenerate.
        * features/i386/32bit-mpx.c: Regenerate.
        * features/i386/32bit-pkeys.c: Regenerate.
        * features/i386/32bit-sse.c: Regenerate.
        * features/i386/64bit-avx.c: Regenerate.
        * features/i386/64bit-avx512.c: Regenerate.
        * features/i386/64bit-core.c: Regenerate.
        * features/i386/64bit-linux.c: Regenerate.
        * features/i386/64bit-mpx.c: Regenerate.
        * features/i386/64bit-pkeys.c: Regenerate.
        * features/i386/64bit-segments.c: Regenerate.
        * features/i386/64bit-sse.c: Regenerate.
        * features/i386/x32-core.c: Regenerate.
        * features/tic6x-c6xp.c: Regenerate.
        * features/tic6x-core.c: Regenerate.
        * features/tic6x-gp.c: Regenerate.
        * target-descriptions.c: Use common/tdesc.h.
        * target-descriptions.h: Likewise.

2018-02-24  Tom Tromey  <tom@tromey.com>

        * linux-thread-db.c (try_thread_db_load_from_pdir_1)
        (try_thread_db_load_from_dir, thread_db_load_search): Use
        std::string.
        (info_auto_load_libthread_db_compare): Return bool.  Change
        argument types.
        (info_auto_load_libthread_db): Use std::vector, std::string.
        Remove cleanups.

2018-02-24  Tom Tromey  <tom@tromey.com>

        * i386-tdep.c (i386_fast_tracepoint_valid_at): "msg" now a
        std::string.
        * gdbarch.sh (fast_tracepoint_valid_at): Change "msg" to a
        std::string*.
        * gdbarch.c: Rebuild.
        * gdbarch.h: Rebuild.
        * breakpoint.c (check_fast_tracepoint_sals): Use std::string.
        * arch-utils.h (default_fast_tracepoint_valid_at): Update.
        * arch-utils.c (default_fast_tracepoint_valid_at): "msg" now a
        std::string*.

2018-02-23  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdbtypes.h (sect_offset): Change type to uint64_t.
        (sect_offset_str): New function.
        * dwarf2read.c (create_addrmap_from_aranges): Use
        sect_offset_str.
        (error_check_comp_unit_head): Likewise.
        (create_debug_type_hash_table): Likewise.
        (read_cutu_die_from_dwo): Likewise.
        (init_cutu_and_read_dies): Likewise.
        (init_cutu_and_read_dies_no_follow): Likewise.
        (process_psymtab_comp_unit_reader): Likewise.
        (partial_die_parent_scope): Likewise.
        (peek_die_abbrev): Likewise.
        (process_queue): Likewise.
        (dwarf2_physname): Likewise.
        (read_namespace_alias): Likewise.
        (read_import_statement): Likewise.
        (create_dwo_cu_reader): Likewise.
        (create_cus_hash_table): Likewise.
        (lookup_dwo_cutu): Likewise.
        (inherit_abstract_dies): Likewise.
        (read_func_scope): Likewise.
        (read_call_site_scope): Likewise.
        (dwarf2_add_member_fn): Likewise.
        (read_common_block): Likewise.
        (read_module_type): Likewise.
        (read_typedef): Likewise.
        (read_subrange_type): Likewise.
        (load_partial_dies): Likewise.
        (read_partial_die): Likewise.
        (find_partial_die): Likewise.
        (read_str_index): Likewise.
        (dwarf2_string_attr): Likewise.
        (build_error_marker_type): Likewise.
        (lookup_die_type): Likewise.
        (dump_die_shallow): Likewise.
        (follow_die_ref): Likewise.
        (dwarf2_fetch_die_loc_sect_off): Likewise.
        (dwarf2_fetch_constant_bytes): Likewise.
        (follow_die_sig): Likewise.
        (get_signatured_type): Likewise.
        (get_DW_AT_signature_type): Likewise.
        (dwarf2_find_containing_comp_unit): Likewise.
        (set_die_type): Likewise.

2018-02-21  John Baldwin  <jhb@FreeBSD.org>

        * arch/aarch64.c: Include "common-defs.h".
        * arch/amd64.c: Likewise.
        * arch/i386.c: Likewise.

2018-02-21  Tom Tromey  <tom@tromey.com>

        * value.h: (extract_field_op): Update.
        * eval.c (extract_field_op): Return a const char *.
        * expression.h (parse_expression_for_completion): Update.
        * completer.c (complete_expression): Update.
        (add_struct_fields): Make fieldname const.
        * parse.c (expout_completion_name): Now a unique_xmalloc_ptr.
        (mark_completion_tag, parse_exp_in_context_1): Update.
        (parse_expression_for_completion): Change "name" to
        unique_xmalloc_ptr*.

2018-02-21  Tom Tromey  <tom@tromey.com>

        * infcall.c (call_function_by_hand_dummy): Use std::vector.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * avr-tdep.c (avr_read_pc): Change parameter type to
        readable_regcache.
        * gdbarch.sh (read_pc): Likewise.
        * gdbarch.c: Re-generated.
        * gdbarch.h: Re-generated.
        * hppa-tdep.c (hppa_read_pc): Change parameter type to
        readable_regcache.
        * ia64-tdep.c (ia64_read_pc): Likewise.
        * mips-tdep.c (mips_read_pc): Likewise.
        * spu-tdep.c (spu_read_pc): Likewise.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * Makefile.in (COMMON_SFILES): Add regcache-dump.c
        * regcache-dump.c: New file.
        * regcache.c: Move register_dump to regcache-dump.c.
        (maintenance_print_registers): Likewise.
        (maintenance_print_raw_registers): Likewise.
        (maintenance_print_cooked_registers): Likewise.
        (maintenance_print_register_groups): Likewise.
        (maintenance_print_remote_registers): Likewise.
        (_initialize_regcache): Likewise.
        * regcache.h (register_dump): Moved from regcache.c.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * regcache.c (regcache::regcache): Update.
        (regcache::invalidate): Move it to detached_regcache::invalidate.
        (get_thread_arch_aspace_regcache): Update.
        (regcache::raw_update): Update.
        (regcache::cooked_read): Remove some code.
        (regcache::cooked_read_value): Likewise.
        (regcache::raw_write): Remove assert on m_readonly_p.
        (regcache::raw_supply_integer): Move it to
        detached_regcache::raw_supply_integer.
        (regcache::raw_supply_zeroed): Likewise.
        * regcache.h (detached_regcache) <raw_supply_integer>: New
        declaration.
        <raw_supply_zeroed, invalidate>: Likewise.
        (regcache) <raw_supply_integer, raw_supply_zeroed>: Removed.
        <invalidate>: Likewise.
        <m_readonly_p>: Removed.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * infcmd.c (get_return_value): Let stop_regs point to
        get_current_regcache.
        * regcache.c (regcache::regcache): Remove.
        (register_dump_reg_buffer): New class.
        (regcache_print): Adjust.
        * regcache.h (regcache): Remove constructors.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * regcache.c (class register_dump): New class.
        (register_dump_regcache, register_dump_none): New class.
        (register_dump_remote, register_dump_groups): New class.
        (regcache_print): Update.
        * regcache.h (regcache_dump_what): Move it to regcache.c.
        (regcache) <dump>: Remove.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * jit.c (struct jit_unwind_private) <regcache>: Change its type to
         reg_buffer_rw *.
        (jit_unwind_reg_set_impl): Call raw_supply.
        (jit_frame_sniffer): Use reg_buffer_rw.
        * record-full.c (record_full_core_regbuf): Change its type.
        (record_full_core_open_1): Use reg_buffer_rw.
        (record_full_close): Likewise.
        (record_full_core_fetch_registers): Use regcache->raw_supply.
        (record_full_core_store_registers): Likewise.
        * regcache.c (regcache::get_register_status): Move it to
        reg_buffer.
        (regcache_raw_set_cached_value): Remove.
        (regcache::raw_set_cached_value): Remove.
        (regcache::raw_write): Call raw_supply.
        (regcache::raw_supply): Move it to reg_buffer_rw.
        * regcache.h (regcache_raw_set_cached_value): Remove.
        (reg_buffer_rw): New class.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * dummy-frame.c (dummy_frame_cache) <prev_regcache>: Use
        readonly_detached_regcache.
        (dummy_frame_prev_register): Use regcache->cooked_read.
        * frame.c (frame_save_as_regcache): Change return type.
        (frame_pop): Update.
        * frame.h (frame_save_as_regcache): Update declaration.
        * inferior.h (get_infcall_suspend_state_regcache): Update
        declaration.
        * infrun.c (infcall_suspend_state) <registers>: use
        readonly_detached_regcache.
        (save_infcall_suspend_state): Don't use regcache_dup.
        (get_infcall_suspend_state_regcache): Change return type.
        * linux-fork.c (struct fork_info) <savedregs>: Change to
        readonly_detached_regcache.
        <pc>: New field.
        (fork_save_infrun_state): Don't use regcache_dup.
        (info_checkpoints_command): Adjust.
        * mi/mi-main.c (register_changed_p): Update declaration.
        (mi_cmd_data_list_changed_registers): Use
        readonly_detached_regcache.
        (register_changed_p): Change parameter type to
        readonly_detached_regcache.
        * ppc-linux-tdep.c (ppu2spu_cache) <regcache>: Use
        readonly_detached_regcache.
        (ppu2spu_sniffer): Construct a new readonly_detached_regcache.
        * regcache.c (readonly_detached_regcache::readonly_detached_regcache):
        New.
        (regcache::save): Move it to reg_buffer.
        (regcache::restore): Change parameter type.
        (regcache_dup): Remove.
        * regcache.h (reg_buffer) <save>: New method.
        (readonly_detached_regcache): New class.
        * spu-tdep.c (spu2ppu_cache) <regcache>: Use
        readonly_detached_regcache.
        (spu2ppu_sniffer): Construct a new readonly_detached_regcache.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * frame.c (frame_save_as_regcache): Use regcache method save.
        (frame_pop): Use regcache method restore.
        * infrun.c (restore_infcall_suspend_state): Likewise.
        * linux-fork.c (fork_load_infrun_state): Likewise.
        * ppc-linux-tdep.c (ppu2spu_sniffer): User regcache method
        save.
        * regcache.c (regcache_save): Remove.
        (regcache::restore): More asserts.
        (regcache_cpy): Remove.
        * regcache.h (regcache_save): Remove the declaration.
        (regcache::restore): Move from private to public.
        Remove the friend declaration of regcache_cpy.
        (regcache_cpy): Remove declaration.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_pseudo_register_read_value): Change
        parameter type to 'readable_regcache *'.
        * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
        * arm-tdep.c (arm_neon_quad_read): Likewise.
        (arm_pseudo_read): Likewise.
        * avr-tdep.c (avr_pseudo_register_read): Likewise.
        * bfin-tdep.c (bfin_pseudo_register_read): Likewise.
        * frv-tdep.c (frv_pseudo_register_read): Likewise.
        * gdbarch.c: Re-generated.
        * gdbarch.h: Re-generated.
        * gdbarch.sh (pseudo_register_read): Change parameter type to
        'readable_regcache *'.
        (pseudo_register_read_value): Likewise.
        * h8300-tdep.c (pseudo_from_raw_register): Likewise.
        (h8300_pseudo_register_read): Likewise.
        * hppa-tdep.c (hppa_pseudo_register_read): Likewise.
        * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
        (i386_pseudo_register_read_into_value): Likewise.
        (i386_pseudo_register_read_value): Likewise.
        * i386-tdep.h (i386_pseudo_register_read_into_value): Update
        declaration.
        * ia64-tdep.c (ia64_pseudo_register_read): Likewise.
        * m32c-tdep.c (m32c_raw_read): Likewise.
        (m32c_read_flg): Likewise.
        (m32c_banked_register): Likewise.
        (m32c_banked_read): Likewise.
        (m32c_sb_read): Likewise.
        (m32c_part_read): Likewise.
        (m32c_cat_read): Likewise.
        (m32c_r3r2r1r0_read): Likewise.
        (m32c_pseudo_register_read): Likewise.
        * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
        * mep-tdep.c (mep_pseudo_cr32_read): Likewise.
        (mep_pseudo_cr64_read): Likewise.
        (mep_pseudo_register_read): Likewise.
        * mips-tdep.c (mips_pseudo_register_read): Likewise.
        * msp430-tdep.c (msp430_pseudo_register_read): Likewise.
        * nds32-tdep.c (nds32_pseudo_register_read): Likewise.
        * regcache.c (regcache::raw_read): Move it to readable_regcache.
        (regcache::cooked_read): Likewise.
        (regcache::cooked_read_value): Likewise.
        (regcache_cooked_read_signed):
        (regcache::cooked_read): Likewise.
        * regcache.h (readable_regcache): New class.
        (regcache): Inherit readable_regcache.  Move some methods to
        readable_regcache.
        * rl78-tdep.c (rl78_pseudo_register_read): Change
        parameter type to 'readable_regcache *'.
        * rs6000-tdep.c (do_regcache_raw_read): Remove.
        (e500_pseudo_register_read): Change parameter type to
        'readable_regcache *'.
        (dfp_pseudo_register_read): Likewise.
        (vsx_pseudo_register_read): Likewise.
        (efpr_pseudo_register_read): Likewise.
        * s390-tdep.c (s390_pseudo_register_read): Likewise.
        * sh-tdep.c (sh_pseudo_register_read): Likewise.
        * sh64-tdep.c (pseudo_register_read_portions): Likewise.
        (sh64_pseudo_register_read): Likewise.
        * sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
        * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
        * spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
        (spu_pseudo_register_read): Likewise.
        * xtensa-tdep.c (xtensa_register_read_masked): Likewise.
        (xtensa_pseudo_register_read): Likewise.

2018-02-21  Yao Qi  <yao.qi@linaro.org>

        * regcache.c (regcache::regcache): Call reg_buffer ctor.
        (regcache::arch): Move it to reg_buffer::arch.
        (regcache::register_buffer): Likewise.
        (regcache::assert_regnum): Likewise.
        (regcache::num_raw_registers): Likewise.
        * regcache.h (reg_buffer): New class.
        (regcache): Inherit reg_buffer.

2018-02-20  Simon Marchi  <simon.marchi@ericsson.com>

        * remote-sim.c (gdb_os_printf_filtered, gdb_os_vprintf_filtered,
        gdb_os_evprintf_filtered, gdb_os_error): Add ATTRIBUTE_PRINTF.

2018-02-20  Markus Metzger  <markus.t.metzger@intel.com>

        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add mkstemp.

2018-02-19  Alan Hayward  <alan.hayward@arm.com>

        * Makefile.in: (COMMON_SFILES): Add common/*.c files.
        (SFILES): Remove common/*.c files.
        (COMMON_OBS): Remove some *.o files built from common/*.c files.
        * common/common.host: Add common reference.
        * configure.ac: Likewise.
        * configure: Regenerate.

2018-02-16  Yao Qi  <yao.qi@linaro.org>

        * block.c (block_namespace_info): Inherit allocate_on_obstack.
        (block_initialize_namespace): Use new.
        * dwarf2read.c (dwarf2_per_objfile): Inherit allocate_on_obstack.
        (dwarf2_free_objfile): Use delete.
        * gdbtypes.c (type_pair): Inherit allocate_on_obstack.
        (copy_type_recursive): Use new.
        * gdb_obstack.h (allocate_on_obstack): New.

2018-02-15  Yao Qi  <yao.qi@linaro.org>

        PR gdb/22849
        * inferior.c (exit_inferior_1): Reset inf->control.

2018-02-15  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_to_fixed_value_create): Delete advance
        declaration.

2018-02-14  Pedro Alves  <palves@redhat.com>

        * frame-unwind.c (frame_unwind_try_unwinder): Always call
        frame_cleanup_after_sniffer on exception.

2018-02-14  Tom Tromey  <tom@tromey.com>

        * solist.h (struct target_so_ops) <bfd_open>: Make pathname
        const.
        (solib_bfd_open): Make pathname const.
        * solib.c (solib_bfd_open): Make pathname const.
        * solib-spu.c (spu_bfd_fopen): Make name const.
        (spu_bfd_open): Make pathname const.
        * solib-darwin.c (darwin_bfd_open): Make pathname const.
        * solib-aix.c (solib_aix_bfd_open): Make pathname const.

2018-02-14  Tom Tromey  <tom@tromey.com>

        * symfile.c (symfile_bfd_open): Update.
        * source.h (openp, source_full_path_of, find_and_open_source):
        Change argument type to unique_xmalloc_ptr.
        * source.c (openp): Take a unique_xmalloc_ptr.
        (source_full_path_of, find_and_open_source): Likewise.
        (open_source_file, symtab_to_fullname): Update.
        * solist.h (struct target_so_ops) <find_and_open_solib>: Take a
        unique_xmalloc_ptr.
        * solib.c (solib_find_1): Use unique_xmalloc_ptr.
        (exec_file_find): Update.
        * psymtab.c (psymtab_to_fullname): Update.
        * nto-tdep.h (nto_find_and_open_solib): Update.
        * nto-tdep.c (nto_find_and_open_solib): Change temp_path to a
        unique_xmalloc_ptr.
        * exec.c (exec_file_attach): Update.
        * dwarf2read.c (try_open_dwop_file): Use unique_xmalloc_ptr.
        * cli/cli-cmds.c (find_and_open_script): Use unique_xmalloc_ptr.

2018-02-14  Tom Tromey  <tom@tromey.com>

        * solib.c: Include source.h.
        * nto-tdep.c: Include source.h.
        * mi/mi-cmd-env.c: Include source.h.
        * infcmd.c: Include source.h.
        * exec.c: Include source.h.
        * defs.h (enum openp_flag, openp, source_full_path_of, mod_path)
        (add_path, directory_switch, source_path, init_source_path): Move
        declarations...
        * source.h (enum openp_flag, openp, source_full_path_of, mod_path)
        (add_path, directory_switch, source_path, init_source_path):
        ...here.

2018-02-14  Tom Tromey  <tom@tromey.com>

        * solist.h (exec_file_find, solib_find): Return
        unique_xmalloc_ptr.
        (solib_bfd_fopen): Take a const char *.
        * solib.c (solib_find_1): Return unique_xmalloc_ptr.
        (exec_file_find, solib_find): Likewise.
        (solib_bfd_fopen): Do not take ownership of "pathname".
        (solib_bfd_open): Use unique_xmalloc_ptr.
        * solib-darwin.c (darwin_bfd_open): Use unique_xmalloc_ptr.
        * solib-aix.c (solib_aix_bfd_open): Use unique_xmalloc_ptr.
        * infrun.c (follow_exec): Use unique_xmalloc_ptr.
        * exec.c (exec_file_locate_attach): Use unique_xmalloc_ptr.

2018-02-14  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (name_match_type_from_name): Remove reference to
        ada_name_for_lookup in function's documentation.
        * ada-lang.h (ada_name_for_lookup): Delete declaration.

2018-02-13  Simon Marchi  <simon.marchi@polymtl.ca>

        * defs.h (enum openp_flags): New enum.
        (OPF_TRY_CWD_FIRST, OPF_SEARCH_IN_PATH, OPF_RETURN_REALPATH):
        Move to enum openp_flags.
        (openp_flags): New enum flags.
        (openp): Change parameter type to openp_flags.
        * source.c (openp): Change parameter type to openp_flags.
        * cli/cli-cmds.c (find_and_open_script): Use openp_flags.
        * dwarf2read.c (try_open_dwop_file): Use openp_flags.

2018-02-13  Simon Marchi  <simon.marchi@polymtl.ca>

        * maint.c (_initialize_maint_cmds): Fix prefix of maint set/show
        per-command.

2018-02-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * dwarf2read.c (dwarf2_release_queue): Delete function, move body
        into...
        (class dwarf2_queue_guard): ...the destructor of this new class.
        (dw2_do_instantiate_symtab): Create instance of the new class
        dwarf2_queue_guard, remove cleanup.

2018-02-09  Tom Tromey  <tom@tromey.com>

        * source.c (find_source_lines): Don't reference past the end of
        the vector.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * remote.c (remote_btrace_maybe_reopen): Change error message.
        * btrace.c (btrace_enable): Likewise.
        (parse_xml_btrace): Likewise.
        (parse_xml_btrace_conf): Likewise.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * nat/linux-btrace.c (diagnose_perf_event_open_fail): New.
        (linux_enable_pt, linux_enable_bts): Call
        diagnose_perf_event_open_fail.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * nat/linux-btrace.c (perf_event_pt_event_type): Improve error message.
        Remove parameter and change return type.  Update callers.  Move it.
        (linux_enable_bts, linux_enable_pt): Improve error message.
        (linux_enable_pt): Remove zero buffer size check.
        (linux_enable_btrace): Improve error messages.  Remove NULL return
        check.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (btrace_enable): Remove target_supports_btrace call.
        * nat/linux-btrace.c (perf_event_pt_event_type): Move.
        (kernel_supports_bts, kernel_supports_pt, linux_supports_bts)
        (linux_supports_pt, linux_supports_btrace): Remove.
        (linux_enable_bts): Call cpu_supports_bts.
        * nat/linux-btrace.h (linux_supports_btrace): Remove.
        * remote.c (remote_supports_btrace): Remove.
        (init_remote_ops): Remove remote_supports_btrace.
        * target-delegates.c: Regenerated.
        * target.c (target_supports_btrace): Remove.
        * target.h (target_ops) <to_supports_btrace>: Remove
        (target_supports_btrace): Remove.
        * x86-linux-nat.c (x86_linux_create_target): Remove
        linux_supports_btrace.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * nat/linux-btrace.c (linux_enable_btrace): Throw exception if enabling
        btrace failed.
        * x86-linux-nat.c (x86_linux_enable_btrace): Catch btrace enabling
        exception and use message in own exception.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * nat/linux-btrace.c: Include scoped_fd.h and scoped_mmap.h.
        (perf_event_pt_event_type): Use gdb_file_up.
        (linux_enable_bts, linux_enable_pt): Use gdb::unique_xmalloc_ptr,
        scoped_fd, and scoped_mmap.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * common/scoped_mmap.h: New.
        * unittests/scoped_mmap-selftest.c: New.
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/scoped_mmap-selftest.c.

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * common/scoped_fd.h: New.
        * unittests/scoped_fd-selftest.c: New.
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/scoped_fd-selftest.c.

2018-02-09  Tom Tromey  <tom@tromey.com>

        * auto-load.c (auto_load_section_scripts): Use
        gdb::unique_xmalloc_ptr.

2018-02-09  Tom Tromey  <tom@tromey.com>

        * auto-load.c (execute_script_contents): Use std::string.

2018-02-09  Joel Brobecker  <brobecker@adacore.com>

        * NEWS <Changes in GDB 8.1>: Clarify that "rbreak" is a new
        Python function, rather than a new command.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * solib.c (solib_find_1): Use std::string.
        (solib_bfd_fopen): Use unique_xmalloc_ptr.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * build-id.c (build_id_to_debug_bfd): Use unique_xmalloc_ptr.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * source.c (find_source_lines): Use gdb::def_vector.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * macrocmd.c (struct temporary_macro_definition): New.
        (macro_define_command): Use temporary_macro_definition.  Remove
        cleanups.
        (free_macro_definition_ptr): Remove.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * macroexp.c (maybe_expand): Use std::string.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * macroexp.c (struct macro_buffer): Add initializers for some
        members.
        (init_buffer, init_shared_buffer, free_buffer)
        (free_buffer_return_text): Remove.
        (macro_buffer): New constructors.
        (~macro_buffer): New destructor.
        (macro_buffer::set_shared): New method.
        (macro_buffer::resize_buffer, macro_buffer::appendc)
        (macro_buffer::appendmem): Now methods, not free functions.
        (set_token, append_tokens_without_splicing, stringify)
        (macro_stringify): Update.
        (gather_arguments): Change return type.  Remove argc_p argument,
        add args_ptr argument.  Use std::vector.
        (substitute_args): Remove argc argument.  Accept std::vector.
        (expand): Update.  Use std::vector.
        (scan, macro_expand, macro_expand_next): Update.

2018-02-08  Tom Tromey  <tom@tromey.com>

        * symtab.c (default_collect_symbol_completion_matches_break_on):
        Use unique_xmalloc_ptr.
        * macroscope.h: (sal_macro_scope, user_macro_scope)
        (default_macro_scope): Return unique_xmalloc_ptr.
        * macroscope.c (sal_macro_scope, user_macro_scope)
        (default_macro_scope): Return unique_xmalloc_ptr.
        * macroexp.h (macro_expand, macro_expand_once): Return
        unique_xmalloc_ptr.
        * macroexp.c (macro_expand, macro_expand_once): Return
        unique_xmalloc_ptr.
        * macrocmd.c (macro_expand_command, macro_expand_once_command)
        (info_macro_command, info_macros_command): Use
        unique_xmalloc_ptr.
        * compile/compile-c-support.c (write_macro_definitions): Use
        unique_xmalloc_ptr.
        * c-exp.y (c_parse): Use unique_xmalloc_ptr.

2018-02-07  Simon Marchi  <simon.marchi@ericsson.com>

        * value.c (value_static_field): Assign field type instead of
        containing type when returning an optimized out value.

2018-02-06  Yao Qi  <yao.qi@linaro.org>

        * ft32-tdep.c (ft32_read_pc): Remove.
        (ft32_write_pc): Remove.
        (ft32_gdbarch_init): Update.
        * m32r-tdep.c (m32r_read_pc): Remove.
        (m32r_gdbarch_init): Update.
        * mep-tdep.c (mep_read_pc): Remove.
        (mep_gdbarch_init): Update.
        * microblaze-tdep.c (microblaze_write_pc): Remove.
        (microblaze_gdbarch_init): Update.
        * mn10300-tdep.c (mn10300_read_pc): Remove.
        (mn10300_write_pc): Remove.
        (mn10300_gdbarch_init): Update.
        * moxie-tdep.c (moxie_read_pc): Remove.
        (moxie_write_pc): Remove.
        (moxie_gdbarch_init): Update.

2018-02-06  Yao Qi  <yao.qi@linaro.org>

        * expprint.c (print_subexp_standard): Handle
        OP_F77_UNDETERMINED_ARGLIST.
        (dump_subexp_body_standard): Likewise.

2018-02-05  Alan Hayward  <alan.hayward@arm.com>

        * target-descriptions.c (tdesc_element_visitor) Add empty
        implementations.
        (tdesc_type): Move make_gdb_type from here.
        (tdesc_type_builtin): Likewise.
        (tdesc_type_vector): Likewise.
        (tdesc_type_with_fields): Move make_gdb_type_ functions from here.
        (make_gdb_type_struct): Move from tdesc_type_with_fields.
        (make_gdb_type_union): Likewise.
        (make_gdb_type_flags): Likewise.
        (make_gdb_type_enum): Likewise.
        (make_gdb_type): New function.
        (tdesc_register_type): Use static make_gdb_type.

2018-02-05  Ruslan Kabatsayev <b7.10110111@gmail.com>

        * infcmd.c (default_print_one_register_info): Align natural-format
        column values consistently one under another.
        (pad_to_column): New function.

2018-02-05  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (dwarf2_physname): Move commment.

2018-02-01  Leszek Swirski  <leszeks@google.com>

        * varobj.c (varobj_formatted_print_options): Allow recursive
        pretty printing if pretty printing is enabled.

2018-02-01  Leszek Swirski  <leszeks@google.com>

        * c-exp.y (lex_one_token, classify_name, yylex): Don't classify
        names after a structop as a filename.

2018-02-01  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_data_proc_misc_ld_str): Rewrite it.
        (arm_record_coproc_data_proc): Likewise.

2018-02-01  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_extension_space): Change ret to signed.

2018-01-31  Nikola Prica  <nikola.prica@rt-rk.com>

        * rs6000-tdep.c (skip_prologue): Remove shifting for lr_reg and
        assign shifted lr_reg to fdata->lr_register when lr_reg is set.

2018-01-31  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_interrupt): Remove ptid_t parameter.
        * inflow.c (child_terminal_save_inferior): Wrap reference to
        tcgetpgrp in HAVE_TERMIOS_H.
        (child_interrupt, child_pass_ctrlc): Wrap references to signal in
        _WIN32.
        * remote-sim.c (gdbsim_interrupt): Remove ptid_t parameter and
        always iterate over all inferiors.
        (gdbsim_cntrl_c): Adjust.
        * windows-nat.c (windows_interrupt): Remove 'ptid_t' parameter.

2018-01-31  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.c (lookup_array_range_type): Make sure the array's
        index type is objfile-owned if the element type is as well.

2018-01-31  Joel Brobecker  <brobecker@adacore.com>

        GDB 8.1 released.

2018-01-30  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c: Remove includes "features/s390-linux32.c" and
        "features/s390x-linux64.c".
        (_initialize_s390_linux_tdep): Remove initialization of tdescs
        s390_linux32 and s390x_linux64.
        (s390_linux_init_abi_31, s390_linux_init_abi_64): Don't set
        default tdesc.
        * s390-tdep.c: Include "features/s390-linux32.c" and
        "features/s390x-linux64.c".
        (s390_tdesc_valid): Add check for tdesc_has_registers.
        (s390_gdbarch_init): Make sure there is always a valid tdesc.
        (_initialize_s390_tdep): Initialize tdesc_s390_linux32 and
        tdesc_s390x_linux64.
        * s390-linux-tdep.h: Move export of tdesc_s390_linux32 and
        tdesc_s390x_linux64 to...
        * s390-tdep.h: ...here.

2018-01-30  Pedro Alves  <palves@redhat.com>

        PR gdb/13211
        * config.in, configure: Regenerate.
        * configure.ac: Check for getpgid.
        * go32-nat.c (go32_pass_ctrlc): New.
        (go32_target): Install it.
        * inf-child.c (inf_child_target): Install
        child_terminal_save_inferior, child_pass_ctrlc and
        child_interrupt.
        * inf-ptrace.c (inf_ptrace_interrupt): Delete.
        (inf_ptrace_target): No longer install it.
        * infcmd.c (interrupt_target_1): Adjust.
        * inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
        (child_interrupt): Declare.
        (inferior::terminal_state): New.
        * inflow.c (struct terminal_info): Update comments.
        (inferior_process_group): Delete.
        (terminal_is_ours): Delete.
        (gdb_tty_state): New.
        (child_terminal_init): Adjust.
        (is_gdb_terminal, sharing_input_terminal_1)
        (sharing_input_terminal): New functions.
        (child_terminal_inferior): Adjust.  Use sharing_input_terminal.
        Set the process's actual process group in the foreground if
        possible.  Handle is_ours_for_output/is_ours distinction.  Don't
        mark terminal as the inferior's if not sharing GDB's terminal.
        Don't check attach_flag.
        (child_terminal_ours_for_output, child_terminal_ours): Adjust to
        pass down a target_terminal_state.
        (child_terminal_save_inferior): New, factored out from ...
        (child_terminal_ours_1): ... this.  Handle
        target_terminal_state::is_ours_for_output.
        (child_interrupt, child_pass_ctrlc): New.
        (inflow_inferior_exit): Clear the inferior's terminal_state.
        (copy_terminal_info): Copy the inferior's terminal state.
        (_initialize_inflow): Remove reference to terminal_is_ours.
        * inflow.h (inferior_process_group): Delete.
        * nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
        * procfs.c (procfs_target): Don't install procfs_interrupt.
        (procfs_interrupt): Delete.
        * remote.c (remote_serial_quit_handler): Adjust.
        (remote_interrupt): Remove ptid parameter.  Adjust.
        * target-delegates.c: Regenerate.
        * target.c: Include "terminal.h".
        (target_terminal::terminal_state): Rename to ...
        (target_terminal::m_terminal_state): ... this.
        (target_terminal::init): Adjust.
        (target_terminal::inferior): Adjust to per-inferior
        terminal_state.
        (target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
        (target_terminal::ours, target_terminal::ours_for_output): Use
        target_terminal_is_ours_kind.
        (target_interrupt): Remove ptid parameter.  Adjust.
        (default_target_pass_ctrlc): Adjust.
        * target.h (target_ops::to_terminal_save_inferior): New field.
        (target_ops::to_interrupt): Remove ptid_t parameter.
        (target_interrupt): Remove ptid_t parameter.  Update comment.
        (target_pass_ctrlc): Update comment.
        * target/target.h (target_terminal_state): New scoped enum,
        factored out of ...
        (target_terminal::terminal_state): ... here.
        (target_terminal::inferior): Update comments.
        (target_terminal::restore_inferior): New.
        (target_terminal::is_inferior, target_terminal::is_ours)
        (target_terminal::is_ours_for_output): Adjust.
        (target_terminal::scoped_restore_terminal_state): Adjust to
        rename, and call restore_inferior() instead of inferior().
        (target_terminal::scoped_restore_terminal_state::m_state): Change
        type.
        (target_terminal::terminal_state): Rename to ...
        (target_terminal::m_terminal_state): ... this and change type.

2018-01-30  Pedro Alves  <palves@redhat.com>

        * linux-nat.c (wait_for_signal): New function.
        (wait_lwp, linux_nat_wait_1): Use it instead of calling sigsuspend
        directly.
        (async_terminal_is_ours)
        (linux_nat_terminal_inferior, linux_nat_terminal_ours): Delete.
        (linux_nat_add_target): Don't override
        to_terminal_inferior/to_terminal_ours.

2018-01-29  Sergio Durigan Junior  <sergiodj@redhat.com>

        * remote.c (remote_follow_fork): Don't call "detach_inferior".

2018-01-28  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (free_dwo_files): Add forward-declaration.
        (dwarf2_per_objfile::~dwarf2_per_objfile): Move content from
        dwarf2_per_objfile_free here.
        (dwarf2_per_objfile_free): Remove.
        (_initialize_dwarf2_read): Don't register
        dwarf2_per_objfile_free as a registry cleanup.

2018-01-27  Eli Zaretskii  <eliz@gnu.org>

        Avoid compilation errors in MinGW native builds

        The error is triggered by including python-internal.h, and the
        error message is:

             In file included from d:\usr\lib\gcc\mingw32\6.3.0\include\c++\math.h:36:0,
                      from build-gnulib/import/math.h:27,
                      from d:/usr/Python26/include/pyport.h:235,
                      from d:/usr/Python26/include/Python.h:58,
                      from python/python-internal.h:94,
                      from python/py-arch.c:24:
             d:\usr\lib\gcc\mingw32\6.3.0\include\c++\cmath:1157:11: error: '::hypot' has not been declared
        using ::hypot;
                ^~~~~

        This happens because Python headers define 'hypot' to expand t
        '_hypot' in the Windows builds.
        * python/python-internal.h (_hypot) [__MINGW32__]: Define back to
        'hypoth'.  This avoids a compilation error.

2018-01-26  Alan Hayward  <alan.hayward@arm.com>

        * MAINTAINERS (Write After Approval): Fix ordering.

2018-01-26  Alan Hayward  <alan.hayward@arm.com>

        * MAINTAINERS (Write After Approval): Add Alan Hayward.

2018-01-26  Alan Modra  <amodra@gmail.com>

        * ppc-linux-tdep.c (powerpc32_plt_stub): Make const.
        (powerpc32_plt_stub_so_1): Rename from powerpc32_plt_stub_so.
        Remove nop.  Make const.  Comment.
        (powerpc32_plt_stub_so_2): New.
        (POWERPC32_PLT_CHECK_LEN): Rename from POWERPC32_PLT_STUB_LEN.
        Correct count.  Update uses.
        (ppc_skip_trampoline_code): Match powerpc32_plt_stub_so_2 too.
        Move common code reading PLT entry word.  Correct
        powerpc32_plt_stub PLT address calculation.
        * ppc64-tdep.c (ppc64_standard_linkage1): Make const.
        (ppc64_standard_linkage2, ppc64_standard_linkage3): Likewise.
        (ppc64_standard_linkage4, ppc64_standard_linkage5): Likewise.
        (ppc64_standard_linkage6, ppc64_standard_linkage7): Likewise.
        (ppc64_standard_linkage8): Likewise.
        * rs6000-tdep.c (ppc_insns_match_pattern): Make pattern const.
        Correct insns description.
        * ppc-tdep.h (ppc_insns_match_pattern): Update prototype.

2018-01-24  Pedro Alves  <palves@redhat.com>

        GCC PR libstdc++/83906
        * gdbtypes.c (operator==(const dynamic_prop &,
        const dynamic_prop &)): New.
        (operator==(const range_bounds &, const range_bounds &)): New.
        (check_types_equal): Use them instead of memcmp.
        * gdbtypes.h (operator==(const dynamic_prop &,
        const dynamic_prop &)): Declare.
        (operator!=(const dynamic_prop &, const dynamic_prop &)): Declare.
        (operator==(const range_bounds &, const range_bounds &)): Declare.
        (operator!=(const range_bounds &, const range_bounds &)): Declare.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_record_address_mask)
        (s390_record_calc_disp_common, s390_record_calc_disp)
        (s390_record_calc_disp_vsce, s390_record_calc_rl, s390_popcnt)
        (s390_record_gpr_g, s390_record_gpr_h, s390_record_vr)
        (s390_process_record): Move to s390-tdep.c.
        (s390_linux_init_abi_any): Adjust.
        * s390-tdep.c (s390_record_address_mask)
        (s390_record_calc_disp_common, s390_record_calc_disp)
        (s390_record_calc_disp_vsce, s390_record_calc_rl, s390_popcnt)
        (s390_record_gpr_g, s390_record_gpr_h, s390_record_vr)
        (s390_process_record): Moved from s390-linux-tdep.c
        (s390_gdbarch_init): Adjust.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-nat.c (s390-tdep.h): New include.
        * Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
        (HFILES_NO_SRCDIR): Add s390-tdep.h.
        (ALLDEPFILES): Add s390-tdep.c.
        * configure.tgt (s390*-*-linux*): Add s390-tdep.o.
        * s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
        * s390-tdep.h: ...this.  New file.
        * s390-linux-tdep.c (s390-tdep.h): New include.
        (_initialize_s390_tdep): Rename to...
        (_initialize_s390_linux_tdep): ...this and adjust.
        (s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
        (enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
        s390-tdep.h.
        (s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
        (is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
        (s390_is_partial_instruction, s390_software_single_step)
        (is_non_branch_ril, s390_displaced_step_copy_insn)
        (s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
        (s390_prologue_data, s390_addr, s390_store, s390_load)
        (s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
        (s390_register_call_saved, s390_guess_tracepoint_registers)
        (s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
        (regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
        (s390_pseudo_register_name, s390_pseudo_register_type)
        (s390_pseudo_register_read, s390_pseudo_register_write)
        (s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
        (s390_ax_pseudo_register_push_stack, s390_gen_return_address)
        (s390_addr_bits_remove, s390_address_class_type_flags)
        (s390_address_class_type_flags_to_name)
        (s390_address_class_name_to_type_flags, s390_effective_inner_type)
        (s390_function_arg_float, s390_function_arg_vector)
        (is_power_of_two, s390_function_arg_integer, s390_arg_state)
        (s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
        (s390_frame_align, s390_register_return_value, s390_return_value)
        (s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
        (s390_unwind_pseudo_register, s390_adjust_frame_regnum)
        (s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
        (s390_trad_frame_prev_register, s390_unwind_cache)
        (s390_prologue_frame_unwind_cache)
        (s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
        (s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
        (s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
        (s390_stub_frame_this_id, s390_stub_frame_prev_register)
        (s390_stub_frame_sniffer, s390_stub_frame_unwind)
        (s390_frame_base_address, s390_local_base_address)
        (s390_frame_base, s390_gcc_target_options)
        (s390_gnu_triplet_regexp, s390_stap_is_single_operand)
        (s390_validate_reg_range, s390_tdesc_valid)
        (s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
        * s390-tdep.c: ...this.  New file.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (gdbarch_tdep.s390_syscall_record): New hook.
        (s390_process_record, s390_gdbarch_tdep_alloc)
        (s390_linux_init_abi_any): Use/set new hook.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (osabi.h): New include.
        (s390_linux_init_abi_31, s390_linux_init_abi_64)
        (s390_linux_init_abi_any): New functions.
        (s390_gdbarch_init, _initialize_s390_tdep): Adjust.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_gdbarch_init): Use gdb_assert for
        tdesc_has_registers check

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_tdesc_valid): New function.
        (s390_validate_reg_range): New macro.
        (s390_gdbarch_init): Adjust.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (gdbarch_tdep) <tdesc>: New field.
        (s390_gdbarch_tdep_alloc): Adjust.
        (s390_gdbarch_init): Adjust.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (gdbarch_tdep) <have_linux_v1, have_linux_v2>
        <have_tdb>: Change type to bool.
        (s390_gdbarch_tdep_alloc): Adjust.
        (s390_gdbarch_init): Adjust.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep (s390_abi_kind) <ABI_NONE>: New default field.
        (gdbarch_tdep) <have_upper, have_vx>: New fields.
        (s390_gdbarch_tdep_alloc): New function.
        (s390_gdbarch_init): Allocate tdep at start and use its fields
        instead of separate variables.

2018-01-23  Philipp Rudo  <prudo@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_gdbarch_init): Remove duplicate checks
        when looking for cached gdbarch and add comment for remaining.

2018-01-22  Pedro Alves  <palves@redhat.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>

        * typeprint.c (whatis_exp): Initialize "val" in the "whatis type"
        case.

2018-01-22  Maciej W. Rozycki  <macro@mips.com>

        * MAINTAINERS: Update my company e-mail address.

2018-01-22  Yao Qi  <yao.qi@linaro.org>

        * regcache.c (cooked_write_test): New function.
        (_initialize_regcache): Register the test.

2018-01-22  Yao Qi  <yao.qi@linaro.org>

        * ia64-tdep.c (ia64_pseudo_register_read): Call
        regcache->cooked_read instead of regcache_cooked_read_unsigned.
        * m32c-tdep.c (m32c_cat_read): Likewise.
        (m32c_r3r2r1r0_read): Likewise.
        * m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
        * xtensa-tdep.c (xtensa_register_read_masked): Likewise.

2018-01-22  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache
        method raw_read instead of regcache_raw_read.
        * amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
        * arm-tdep.c (arm_neon_quad_read): Likewise.
        * avr-tdep.c (avr_pseudo_register_read): Likewise.
        * bfin-tdep.c (bfin_pseudo_register_read): Likewise.
        * frv-tdep.c (frv_pseudo_register_read): Likewise.
        * h8300-tdep.c (h8300_pseudo_register_read): Likewise.
        * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
        (i386_pseudo_register_read_into_value): Likewise.
        * mep-tdep.c (mep_pseudo_cr32_read): Likewise.
        * msp430-tdep.c (msp430_pseudo_register_read): Likewise.
        * nds32-tdep.c (nds32_pseudo_register_read): Likewise.
        * rl78-tdep.c (rl78_pseudo_register_read): Likewise.
        * s390-linux-tdep.c (s390_pseudo_register_read): Likewise.
        * sparc-tdep.c (sparc32_pseudo_register_read):  Likewise.
        * sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
        * spu-tdep.c (spu_pseudo_register_read_spu):  Likewise.
        * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.

2018-01-22  Yao Qi  <yao.qi@linaro.org>

        * Makefile.in (ALL_TARGET_OBS): Remove mt-tdep.o.
        * configure.tgt: Remove target mt.
        * mt-tdep.c: Remove.
        * regcache.c (cooked_read_test): Remove the check for mt.

2018-01-22  Yao Qi  <yao.qi@linaro.org>

        * jit.c (jit_frame_prev_register): Call regcache::cooked_read
        instead of gdbarch_pseudo_register_read_value.

2018-01-22  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (need_gnat_info): Return nonzero if the cu's
        language is Ada.

2018-01-22  Joel Brobecker  <brobecker@adacore.com>

        * linespec.c (create_sals_line_offset): Remove code that preserved
        the symtab_and_line's line number.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * varobj.c (varobj_create): Don't set valid_block when creating a
        floating varobj.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * varobj.c (varobj_create): Remove out of date comment.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR mi/20395
        * ada-exp.y (write_var_from_sym): Pass extra parameter when
        updating innermost block.
        * parse.c (innermost_block_tracker::update): Take extra type
        parameter, and check types match before updating innermost block.
        (write_dollar_variable): Update innermost block for registers.
        * parser-defs.h (enum innermost_block_tracker_type): New enum.
        (innermost_block_tracker::innermost_block_tracker): Initialise
        m_types member.
        (innermost_block_tracker::reset): Take type parameter.
        (innermost_block_tracker::update): Take type parameter, and pass
        type through as needed.
        (innermost_block_tracker::m_types): New member.
        * varobj.c (varobj_create): Pass type when reseting innermost
        block.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * ada-exp.y (write_var_from_sym): Switch to innermost_block API.
        * ada-lang.c (resolve_subexp): Likewise.
        * breakpoint.c (set_breakpoint_condition) Likewise.
        (watch_command_1) Likewise.
        * c-exp.y (variable): Likewise.
        * d-exp.y (PrimaryExpression): Likewise.
        * f-exp.y (variable): Likewise.
        * go-exp.y (variable): Likewise.
        * m2-exp.y (variable): Likewise.
        * objfiles.c (objfile::~objfile): Likewise.
        * p-exp.y (variable): Likewise.
        * parse.c (innermost_block): Change type.
        * parser-defs.h (class innermost_block_tracker): New.
        (innermost_block): Change to innermost_block_tracker.
        * printcmd.c (display_command): Switch to innermost_block API.
        (do_one_display): Likewise.
        * rust-exp.y (do_one_display): Likewise.
        * symfile.c (clear_symtab_users): Likewise.
        * varobj.c (varobj_create): Switch to innermost_block API, replace
        use of innermost_block with block stored on varobj object.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * expression.h (innermost_block): Remove declaration.
        * varobj.c: Add 'parser-defs.h' include.

2018-01-19  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_lookup_symbol_nonlocal): Look up qualified
        symbols in the static and global blocks.

2018-01-19  James Clarke  <jrtc27@jrtc27.com>

        * nat/linux-ptrace.c: Remove unnecessary reinclusion of
        gdb_ptrace.h, and move including gdb_wait.h ...
        * nat/linux-ptrace.h: ... to here.

2018-01-19  Simon Marchi  <simon.marchi@ericsson.com>

        * inf-ptrace.c (inf_ptrace_detach): Adjust call to
        inf_ptrace_detach_success.
        (inf_ptrace_detach_success): Add inferior parameter, use it
        instead of inferior_ptid, pass it to detach_inferior.
        * inf-ptrace.h (inf_ptrace_detach_success): Add inferior
        parameter.
        * inferior.c (detach_inferior): Add overload that takes an
        inferior object.
        * inferior.h (detach_inferior): Likewise.
        * linux-nat.c (linux_nat_detach): Use the inf parameter, don't
        use inferior_ptid, adjust call to inf_ptrace_detach_success.
        * linux-thread-db.c (thread_db_detach): Use inf parameter.

2018-01-19  Simon Marchi  <simon.marchi@ericsson.com>

        * target.h (struct target_ops) <to_detach>: Add inferior
        parameter.
        (target_detach): Likewise.
        * target.c (dispose_inferior): Pass inferior down.
        (target_detach): Pass inferior down.  Assert that it is equal to
        the current inferior.
        * aix-thread.c (aix_thread_detach): Pass inferior down.
        * corefile.c (core_file_command): Pass current_inferior() down.
        * corelow.c (core_detach): Add inferior parameter.
        * darwin-nat.c (darwin_detach): Likewise.
        * gnu-nat.c (gnu_detach): Likewise.
        * inf-ptrace.c (inf_ptrace_detach): Likewise.
        * infcmd.c (detach_command): Pass current_inferior() down to
        target_detach.
        * infrun.c (follow_fork_inferior): Pass parent_inf to
        target_detach.
        (handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to
        target_detach.
        * linux-nat.c (linux_nat_detach): Add inferior parameter.
        * linux-thread-db.c (thread_db_detach): Likewise.
        * nto-procfs.c (procfs_detach): Likewise.
        * procfs.c (procfs_detach): Likewise.
        * record.c (record_detach): Likewise.
        * record.h (struct inferior): Forward-declare.
        (record_detach): Add inferior parameter.
        * remote-sim.c (gdbsim_detach): Likewise.
        * remote.c (remote_detach_1): Likewise.
        (remote_detach): Likewise.
        (extended_remote_detach): Likewise.
        * sol-thread.c (sol_thread_detach): Likewise.
        * target-debug.h (target_debug_print_inferior_p): New macro.
        * target-delegates.c: Re-generate.
        * top.c (kill_or_detach): Pass inferior down to target_detach.
        * windows-nat.c (windows_detach): Add inferior parameter.

2018-01-19  Simon Marchi  <simon.marchi@ericsson.com>

        * target.h (struct target_ops) <to_detach>: Remove args
        parameter.
        (target_detach): Likewise.
        * target.c (dispose_inferior): Adjust.
        (target_detach): Remove args parameter, adjust.
        * aix-thread.c (aix_thread_detach): Adjust.
        * corefile.c (core_file_command): Adjust.
        * corelow.c (core_detach): Adjust.
        * darwin-nat.c (darwin_detach): Adjust.
        * gnu-nat.c (gnu_detach): Adjust.
        * inf-ptrace.c (inf_ptrace_detach): Adjust.
        * infcmd.c (detach_command): Adjust
        * infrun.c (follow_fork_inferior): Adjust.
        (handle_vfork_child_exec_or_exit): Adjust.
        * linux-fork.c (linux_fork_detach): Remove args parameter.
        * linux-fork.h (linux_fork_detach): Likewise.
        * linux-nat.c (linux_nat_detach): Likewise, and adjust.
        * linux-thread-db.c (thread_db_detach): Likewise.
        * nto-procfs.c (procfs_detach): Likewise.
        * procfs.c (procfs_detach): Likewise.
        (do_detach): Remove signo parameter.
        * record.c (record_detach): Remove args parameter.
        * record.h (record_detach): Likewise.
        * remote-sim.c (gdbsim_detach): Likewise.
        * remote.c (remote_detach_1): Likewise.
        (remote_detach): Likewise.
        (extended_remote_detach): Likewise.
        * sol-thread.c (sol_thread_detach): Likewise.
        * target-delegates.c: Re-generate.
        * top.c (struct qt_args) <args>: Remove field.
        (kill_or_detach): Don't pass args.
        (quit_force): Don't set args.
        * windows-nat.c (windows_detach): Remove args parameter.

2018-01-19  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_gcc_target_options): New function.
        (arm_linux_init_abi): Install it.

2018-01-19  Yao Qi  <yao.qi@linaro.org>

        * osabi.c (gdb_osabi_names): Extend the regexp for
        arm-linux-gnueabihf.

2018-01-18  Yao Qi  <yao.qi@linaro.org>

        * dwarf2read.c (abbrev_table) <abbrevs>: Rename it to
        m_abbrevs.
        (abbrev_table::add_abbrev): Update.
        (abbrev_table::lookup_abbrev): Update.

2018-01-18  Yao Qi  <yao.qi@linaro.org>

        * ppc-linux-tdep.c (ppu2spu_prev_register): Call cooked_read.

2018-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>

        * compile/compile.c (compile_to_object): Convert "triplet_rx"
        to "std::string".

2018-01-17  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (symbolp): Remove typedef.  Don't instantiate VEC.

2018-01-17  Tom Tromey  <tom@tromey.com>

        * gdbtypes.h (add_dyn_prop): Remove objfile parameter.
        * gdbtypes.c (add_dyn_prop): Remove objfile parameter.
        (create_array_type_with_stride): Update.
        * dwarf2read.c (set_die_type): Update.

2018-01-17  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (delayed_method_info): Remove typedef.
        (dwarf2_cu::method_info): Now a std::vector.
        (add_to_method_list): Update.
        (free_delayed_list): Remove.
        (compute_delayed_physnames): Update.
        (process_full_comp_unit, process_full_type_unit): Clear the method
        list.  Remove cleanups.
        (psymtab_include_file_name): Add name_holder parameter.  Use
        unique_xmalloc_ptr.
        (dwarf_decode_lines): Update.

2018-01-17  Tom Tromey  <tom@tromey.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (struct dwarf2_cu): Add constructor, destructor.
        (dwarf2_per_objfile::free_cached_comp_units)
        (init_tu_and_read_dwo_dies, init_cutu_and_read_dies)
        (init_cutu_and_read_dies_no_follow): Update.
        (dwarf2_cu::dwarf2_cu): Rename from init_one_comp_unit.
        (dwarf2_cu::~dwarf2_cu): New.
        (free_heap_comp_unit, free_stack_comp_unit): Remove.
        (age_cached_comp_units, free_one_cached_comp_unit): Update.

2018-01-17  Tom Tromey  <tom@tromey.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (struct dwarf2_cu) <abbrev_table>: Remove.
        (struct die_reader_specs) <abbrev_table>: New member.
        (struct abbrev_table): Add constructor.
        <alloc_abbrev, add_abbrev, lookup_abbrev>: Declare.
        <abbrev_obstack>: Now an auto_obstack.
        (abbrev_table_up): New typedef.
        (init_cu_die_reader): Add abbrev_table parameter.
        (read_cutu_die_from_dwo): Remove abbrev_table_provided parameter.
        Add result_dwo_abbrev_table.
        (init_tu_and_read_dwo_dies, init_cutu_and_read_dies)
        (init_cutu_and_read_dies_no_follow, build_type_psymtabs_1):
        Update.
        (peek_die_abbrev): Take die_reader_specs, not dwarf_cu as
        parameter.
        (skip_children): Update.
        (abbrev_table::alloc_abbrev): Rename from
        abbrev_table_alloc_abbrev.
        (abbrev_table::add_abbrev): Rename from abbrev_table_add_abbrev.
        (abbrev_table::lookup_abbrev): Rename from
        abbrev_table_lookup_abbrev.
        (abbrev_table_read_table): Return abbrev_table_up.
        (abbrev_table_free, abbrev_table_free_cleanup)
        (dwarf2_read_abbrevs, dwarf2_free_abbrev_table): Remove.
        (load_partial_dies): Update.

2018-01-17  Tom Tromey  <tom@tromey.com>

        * dwarf2read.c (dwarf2_compute_name): Update comment.
        (read_func_scope, read_variable): Update.
        (new_symbol): Remove.
        (new_symbol_full): Rename to new_symbol.

2018-01-17  Mike Gulick  <mgulick@mathworks.com>

        PR gdb/16577
        * gdb_bfd.c (gdb_bfd_map_section): If unable to read object file, issue
        a warning instead of throwing an error, set section size to 0 and return
        NULL.
        * gdb_bfd.h (gdb_bfd_map_section): Update description.

2018-01-17  Simon Marchi  <simon.marchi@ericsson.com>

        * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Return
        std::string.
        (linux_ptrace_attach_fail_reason_string): Likewise.
        * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason):
        Likewise.
        (linux_ptrace_attach_fail_reason_string): Likewise.
        * linux-nat.c (attach_proc_task_lwp_callback): Adjust.

2018-01-17  Simon Marchi  <simon.marchi@ericsson.com>

        * linux-nat.c (linux_nat_attach): Remove xstrdup.

2018-01-17  Eldar Abusalimov  <eldar.abusalimov@jetbrains.com>

        PR gdb/21559
        * configure.ac: Include <sys/types.h> prior to <sys/user.h> when
        checking for fs_base/gs_base fields in struct user_regs_struct.
        * configure: Regenerate.

2018-01-17  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-tdep.c (aarch64_linux_gcc_target_options): New
        function.
        (aarch64_linux_init_abi): Install it to gdbarch hook
        gcc_target_options.

2018-01-15  Pedro Alves  <palves@redhat.com>

        * common/signals-state-save-restore.c
        (save_original_signals_state): Fix typos.

2017-01-12  Tom Tromey  <tom@tromey.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>

        * Makefile.in (install-only): Install gdb-add-index.

2018-01-12  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (KVE_PROTECTION): Correct value.

2018-01-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * infrun.c (keep_going_pass_signal): Clear step-over info when
        insert_breakpoints fails.

2018-01-11  Pedro Alves  <palves@redhat.com>

        PR gdb/22583
        * infrun.c (resume): Rename to ...
        (resume_1): ... this.
        (resume): Reimplement as wrapper around resume_1.

2018-01-11  Pedro Alves  <palves@redhat.com>

        PR remote/22597
        * remote.c (remote_parse_stop_reply): Default to the last-set
        general thread instead of to 'magic_null_ptid'.

2018-01-10  Pedro Alves  <palves@redhat.com>

        * language.h (language_get_symbol_name_matcher): Rename ...
        (get_symbol_name_matcher): ... this.
        * language.c (language_get_symbol_name_matcher): Ditto.
        * dictionary.c, linespec.c, minsyms.c, psymtab.c, symtab.c: All
        callers adjusted.

2018-01-10  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * dwarf2read.c
        (gdb_index_symbol_name_matcher::gdb_index_symbol_name_matcher):
        Adjust to use language_get_symbol_name_matcher instead of
        language_defn::la_get_symbol_name_matcher.
        * language.c (language_get_symbol_name_matcher): If in Ada mode
        and the lookup name is a verbatim match, return Ada's matcher.
        * language.h (language_get_symbol_name_matcher): Adjust comment.
        (ada_lookup_name_info::verbatim_p):: New method.

2018-01-10  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * ada-lang.c (ada_collect_symbol_completion_matches): If the
        minsym's language is language_auto or language_cplus, pass down
        language_ada instead.
        * symtab.c (compare_symbol_name): Don't frob symbol language here.

2018-01-10  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * minsyms.c (linkage_name_str): New function.
        (iterate_over_minimal_symbols): Use it.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

        * NEWS: Document that 'info proc' now works on FreeBSD.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Check for kinfo_getfile in libutil.
        * configure: Regenerate.
        * config.in: Regenerate.
        * fbsd-nat.c: Include "fbsd-tdep.h".
        (fbsd_fetch_cmdline): New.
        (fbsd_fetch_kinfo_proc): Move earlier and change to return a bool
        rather than calling error.
        (fbsd_info_proc): New.
        (fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails.
        (fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails.
        (fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc".

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (struct free_deleter): Remove.
        (fbsd_find_memory_regions): Use gdb::unique_xmalloc_ptr<>.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_pid_to_exec_file) [KERN_PROC_PATHNAME]: Return
        NULL for an empty pathname.

2018-01-09  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (KVE_STRUCTSIZE, KVE_START, KVE_END, KVE_OFFSET)
        (KVE_FLAGS, KVE_PROTECTION, KVE_PATH, KINFO_VME_PROT_READ)
        (KINFO_VME_PROT_WRITE, KINFO_VME_PROT_EXEC, KINFO_VME_FLAG_COW)
        (KINFO_VME_FLAG_NEEDS_COPY, KINFO_VME_FLAG_NOCOREDUMP)
        (KINFO_VME_FLAG_SUPER, KINFO_VME_FLAG_GROWS_UP)
        (KINFO_VME_FLAG_GROWS_DOWN, KF_STRUCTSIZE, KF_TYPE, KF_FD)
        (KF_PATH, KINFO_FILE_TYPE_VNODE, KINFO_FILE_FD_TYPE_CWD)
        (KINFO_FILE_FD_TYPE_TEXT, SIG_WORDS, struct kinfo_proc_layout)
        (kinfo_proc_layout_32, kinfo_proc_layout_i386)
        (kinfo_proc_layout_64, fbsd_vm_map_entry_flags)
        (fbsd_core_info_proc_mappings, fbsd_core_vnode_path)
        (fbsd_core_fetch_timeval, fbsd_print_sigset)
        (fbsd_core_info_proc_status, fbsd_core_info_proc): New.
        (fbsd_init_abi):  Install gdbarch "core_info_proc" method.
        * fbsd-tdep.h (fbsd_vm_map_entry_flags): New.

2018-01-08  Samuel Thibault  <samuel.thibault@ens-lyon.org>

        * gdb/gnu-nat.c: Include <elf.h> and <link.h>.
        (gnu_xfer_auxv): New function.
        (gnu_xfer_partial): Call gnu_xfer_auxv when `object' is
        TARGET_OBJECT_AUXV.

2018-01-08  Yao Qi  <yao.qi@linaro.org>
            Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (COMMON_SFILES): Remove selftest-arch.c and
        common/selftest.c.
        (COMMON_OBS): Remove selftest.o.
        * configure.ac: Append selftest-arch.c and common/selftest.c to
        CONFIG_SRCS.  Append selftest-arch.o and selftest.o to COMMON_OBS.
        * configure: Re-generated.
        * maint.c (maintenance_selftest): Wrap selftests::run_tests with
        GDB_SELF_TEST.
        (maintenance_info_selftests): Likewise.

2018-01-08  Xavier Roirand  <roirand@adacore.com>

        * ada-valprint.c (val_print_packed_array_elements): Use
        proper number of elements when printing an array indexed
        by an enumeration type.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * dwarf2read.c (struct dwarf2_cu) <dwarf2_per_objfile>: Remove.
        (dw2_get_file_names_reader): Adjust.
        (lookup_dwo_signatured_type): Adjust.
        (lookup_dwp_signatured_type): Adjust.
        (lookup_signatured_type): Adjust.
        (create_type_unit_group): Adjust.
        (get_type_unit_group): Adjust.
        (process_psymtab_comp_unit_reader): Adjust.
        (build_type_psymtabs_reader): Adjust.
        (scan_partial_symbols): Adjust.
        (add_partial_symbol): Adjust.
        (add_partial_subprogram): Adjust.
        (peek_die_abbrev): Adjust.
        (fixup_go_packaging): Adjust.
        (process_imported_unit_die): Adjust.
        (dwarf2_compute_name): Adjust.
        (dwarf2_physname): Adjust.
        (read_import_statement): Adjust.
        (handle_DW_AT_stmt_list): Adjust.
        (read_file_scope): Adjust.
        (read_func_scope): Adjust.
        (read_lexical_block_scope): Adjust.
        (read_call_site_scope): Adjust.
        (read_variable): Adjust.
        (dwarf2_rnglists_process): Adjust.
        (dwarf2_ranges_process): Adjust.
        (dwarf2_ranges_read): Adjust.
        (dwarf2_get_pc_bounds): Adjust.
        (dwarf2_record_block_ranges): Adjust.
        (dwarf2_add_field): Adjust.
        (dwarf2_add_member_fn): Adjust.
        (read_structure_type): Adjust.
        (process_structure_scope): Adjust.
        (read_enumeration_type): Adjust.
        (read_array_type): Adjust.
        (mark_common_block_symbol_computed): Adjust.
        (read_common_block): Adjust.
        (read_namespace_type): Adjust.
        (read_namespace): Adjust.
        (read_module_type): Adjust.
        (read_tag_pointer_type): Adjust.
        (read_tag_ptr_to_member_type): Adjust.
        (read_tag_string_type): Adjust.
        (read_subroutine_type): Adjust.
        (read_typedef): Adjust.
        (read_base_type): Adjust.
        (attr_to_dynamic_prop): Adjust.
        (read_subrange_type): Adjust.
        (read_unspecified_type): Adjust.
        (dwarf2_read_abbrevs): Adjust.
        (load_partial_dies): Adjust.
        (read_partial_die): Adjust.
        (find_partial_die): Adjust.
        (guess_partial_die_structure_name): Adjust.
        (fixup_partial_die): Adjust.
        (read_attribute_value): Adjust.
        (read_addr_index): Adjust.
        (read_addr_index_from_leb128): Adjust.
        (read_str_index): Adjust.
        (dwarf2_string_attr): Adjust.
        (get_debug_line_section): Adjust.
        (dwarf_decode_line_header): Adjust.
        (lnp_state_machine::check_line_address): Adjust.
        (dwarf_decode_lines_1): Adjust.
        (dwarf_decode_lines): Adjust.
        (dwarf2_start_symtab): Adjust.
        (var_decode_location): Adjust.
        (new_symbol_full): Adjust.
        (dwarf2_const_value_data): Adjust.
        (dwarf2_const_value_attr): Adjust.
        (dwarf2_const_value): Adjust.
        (die_type): Adjust.
        (die_containing_type): Adjust.
        (build_error_marker_type): Adjust.
        (lookup_die_type): Adjust.
        (guess_full_die_structure_name): Adjust.
        (anonymous_struct_prefix): Adjust.
        (determine_prefix): Adjust.
        (dwarf2_name): Adjust.
        (follow_die_ref_or_sig): Adjust.
        (follow_die_offset): Adjust.
        (follow_die_ref): Adjust.
        (follow_die_sig_1): Adjust.
        (follow_die_sig): Adjust.
        (get_signatured_type): Adjust.
        (get_DW_AT_signature_type): Adjust.
        (decode_locdesc): Adjust.
        (dwarf_decode_macros): Adjust.
        (cu_debug_loc_section): Adjust.
        (fill_in_loclist_baton): Adjust.
        (dwarf2_symbol_mark_computed): Adjust.
        (init_one_comp_unit): Don't assign
        dwarf2_cu::dwarf2_per_objfile.
        (set_die_type): Adjust.

2018-01-07  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (struct mapped_debug_names): Add constructor.
        <dwarf2_per_objfile>: New field.
        (dwarf2_per_objfile): Remove global.
        (get_dwarf2_per_objfile): New function.
        (set_dwarf2_per_objfile): New function.
        (dwarf2_build_psymtabs_hard): Change objfile parameter to
        dwarf2_per_objfile.
        (abbrev_table_read_table): Add dwarf2_per_objfile parameter.
        (read_abbrev_offset): Likewise.
        (read_indirect_string): Likewise.
        (read_indirect_line_string): Likewise.
        (read_indirect_string_at_offset): Likewise.
        (read_indirect_string_from_dwz): Likewise.
        (dwarf2_find_containing_comp_unit): Change objfile parameter to
        dwarf2_per_objfile.
        (age_cached_comp_units): Add dwarf2_per_objfile parameter.
        (create_all_comp_units): Change objfile parameter to
        dwarf2_per_objfile.
        (create_all_type_units): Likewise.
        (process_queue): Add dwarf2_per_objfile parameter.
        (read_and_check_comp_unit_head): Likewise.
        (lookup_dwo_unit_in_dwp): Likewise.
        (get_dwp_file): Likewise.
        (process_cu_includes): Likewise.
        (struct free_dwo_file_cleanup_data): New struct.
        (dwarf2_has_info): Use get_dwarf2_per_objfile and
        set_dwarf2_per_objfile.
        (dwarf2_get_dwz_file): Add dwarf2_per_objfile parameter.
        (dw2_do_instantiate_symtab): Get dwarf2_per_objfile from
        context, adjust calls.
        (dw2_instantiate_symtab): Likewise.
        (dw2_get_cutu): Add dwarf2_per_objfile parameter.
        (dw2_get_cu): Likewise.
        (create_cu_from_index_list): Change objfile parameter to
        dwarf2_per_objfile.
        (create_cus_from_index_list): Get dwarf2_per_objfile from
        context, adjust calls.
        (create_cus_from_index): Likewise.
        (create_signatured_type_table_from_index): Change objfile
        parameter to dwarf2_per_objfile.
        (create_signatured_type_table_from_debug_names): Change objfile
        parameter to dwarf2_per_objfile.
        (create_addrmap_from_index): Likewise.
        (create_addrmap_from_aranges): Likewise.
        (dwarf2_read_index): Use get_dwarf2_per_objfile, adjust calls.
        (dw2_setup): Remove.
        (dw2_get_file_names_reader): Get dwarf2_per_objfile from
        context.
        (dw2_find_last_source_symtab): Get dwarf2_per_objfile using
        get_dwarf2_per_objfile.
        (dw2_forget_cached_source_info): Likewise.
        (dw2_map_symtabs_matching_filename): Likewise.
        (struct dw2_symtab_iterator) <index>: Remove.
        <dwarf2_per_objfile>: New field.
        (dw2_symtab_iter_init): Replace index parameter with
        dwarf2_per_objfile.
        (dw2_symtab_iter_next): Use dwarf2_per_objfile from iter.
        (dw2_lookup_symbol): Use get_dwarf2_per_objfile and adjust.
        (dw2_print_stats): Likewise.
        (dw2_dump): Likewise.
        (dw2_expand_symtabs_for_function): Likewise.
        (dw2_expand_all_symtabs): Likewise.
        (dw2_expand_symtabs_with_fullname): Likewise.
        (dw2_expand_marked_cus): Replace index and objfile parameters
        with dwarf2_per_objfile.
        (dw_expand_symtabs_matching_file_matcher): Add
        dwarf2_per_objfile parameter and adjust calls.
        (dw2_expand_symtabs_matching): Use get_dwarf2_per_objfile and
        adjust calls.
        (dw2_find_pc_sect_compunit_symtab): Don't call dw2_setup.
        (dw2_map_symbol_filenames): Use get_dwarf2_per_objfile and
        adjust calls.
        (create_cus_from_debug_names_list): Replace objfile parameter
        with dwarf2_per_objfile and adjust calls.
        (create_cus_from_debug_names): Likewise.
        (dwarf2_read_debug_names): Likewise.
        (mapped_debug_names::namei_to_name): Adjust call.
        (dw2_debug_names_iterator::next): Likewise.
        (dw2_debug_names_iterator::find_vec_in_debug_names): Likewise.
        (dw2_debug_names_lookup_symbol): Use get_dwarf2_per_objfile.
        (dw2_debug_names_dump): Likewise.
        (dw2_debug_names_expand_symtabs_for_function): Likewise.
        (dw2_debug_names_expand_symtabs_matching): Likewise.
        (dwarf2_initialize_objfile): Likewise.
        (dwarf2_build_psymtabs): Likewise.
        (get_abbrev_section_for_cu): Get dwarf2_per_objfile from
        this_cu.
        (error_check_comp_unit_head): Add dwarf2_per_objfile parameter.
        (read_and_check_comp_unit_head): Likewise.
        (read_abbrev_offset): Likewise.
        (create_debug_type_hash_table): Likewise.
        (create_debug_types_hash_table): Likewise.
        (create_all_type_units): Replace objfile parameter with
        dwarf2_per_objfile.
        (add_type_unit): Add dwarf2_per_objfile parameter.
        (fill_in_sig_entry_from_dwo_entry): Replace objfile parameter
        with dwarf2_per_objfile.
        (lookup_dwo_signatured_type): Get dwarf2_per_objfile from cu.
        (lookup_dwp_signatured_type): Likewise.
        (lookup_signatured_type): Likewise.
        (read_cutu_die_from_dwo): Likewise.
        (init_tu_and_read_dwo_dies): Likewise.
        (init_cutu_and_read_dies): Likewise.
        (init_cutu_and_read_dies_no_follow): Likewise.
        (allocate_type_unit_groups_table): Add objfile parameter.
        (create_type_unit_group): Use dwarf2_per_objfile from cu.
        (get_type_unit_group): Likewise.
        (process_psymtab_comp_unit): Update call.
        (build_type_psymtabs_reader): Use dwarf2_per_objfile from cu.
        (build_type_psymtabs_1): Add dwarf2_per_objfile parameter.
        (print_tu_stats): Likewise.
        (build_type_psymtab_dependencies): Use dwarf2_per_objfile passed
        in void* parameter.
        (build_type_psymtabs): Change objfile parameter to
        dwarf2_per_objfile.
        (process_skeletonless_type_unit): Use dwarf2_per_objfile
        passed in void* parameter.
        (process_skeletonless_type_units): Change objfile parameter to
        dwarf2_per_objfile.
        (set_partial_user): Likewise.
        (dwarf2_build_psymtabs_hard): Likewise.
        (read_comp_units_from_section): Likewise.
        (create_all_comp_units): Likewise.
        (scan_partial_symbols): Update calls.
        (add_partial_symbol): Likewise.
        (dwarf2_read_symtab): Use get_dwarf2_per_objfile.
        (maybe_queue_comp_unit): Use dwarf2_read_symtab from cu.
        (process_queue): Add dwarf2_per_objfile parameter.
        (get_compunit_symtab): Use dwarf2_per_objfile from cu.
        (compute_compunit_symtab_includes): Likewise.
        (process_cu_includes): Add dwarf2_per_objfile parameter.
        (process_full_comp_unit): Use dwarf2_per_objfile from cu.
        (process_full_type_unit): Likewise.
        (process_imported_unit_die): Update call.
        (handle_DW_AT_stmt_list): Use dwarf2_per_objfile from cu.
        (read_file_scope): Likewise.
        (allocate_dwo_file_hash_table): Add objfile parameter.
        (lookup_dwo_file_slot): Add dwarf2_per_objfile parameter.
        (create_cus_hash_table): Likewise.
        (create_dwp_hash_table): Likewise.
        (create_dwo_unit_in_dwp_v1): Likewise.
        (create_dwp_v2_section): Likewise.
        (create_dwo_unit_in_dwp_v2): Likewise.
        (lookup_dwo_unit_in_dwp): Likewise.
        (try_open_dwop_file): Likewise.
        (open_dwo_file): Likewise. Use dwarf2_per_objfile from cu.
        (open_and_init_dwo_file): Use dwarf2_per_objfile from cu, update
        cleanup to include a reference to dwarf2_per_objfile.
        (open_dwp_file): Add dwarf2_per_objfile parameter.
        (open_and_init_dwp_file): Likewise.
        (get_dwp_file): Likewise.
        (lookup_dwo_cutu): Use dwarf2_per_objfile from cu.
        (queue_and_load_all_dwo_tus): Update call.
        (free_dwo_file_cleanup): Use dwarf2_per_objfile from cleanup
        data.
        (dwarf2_rnglists_process): Use dwarf2_per_objfile from cu.
        (dwarf2_ranges_process): Likewise.
        (dwarf2_get_pc_bounds): Likewise.
        (mark_common_block_symbol_computed): Likewise.
        (abbrev_table_read_table): Add dwarf2_per_objfile parameter.
        (dwarf2_read_abbrevs): Update call.
        (read_partial_die): Use dwarf2_per_objfile from cu.
        (find_partial_die): Likewise.
        (fixup_partial_die): Likewise.
        (read_attribute_value): Likewise.
        (read_indirect_string_at_offset_from): Add objfile parameter.
        (read_indirect_string_at_offset): Add dwarf2_per_objfile
        parameter.
        (read_indirect_string_from_dwz): Add objfile parameter.
        (read_indirect_string): Add objfile parameter.
        (read_addr_index_1): Add dwarf2_per_objfile parameter.
        (read_addr_index): Use dwarf2_per_objfile from cu.
        (dwarf2_read_addr_index): Use dwarf2_per_objfile from cu, don't
        call dw2_setup.
        (read_str_index): Use dwarf2_per_objfile from cu.
        (get_debug_line_section): Likewise.
        (read_formatted_entries): Add dwarf2_per_objfile parameter.
        (dwarf_decode_line_header): Use dwarf2_per_objfile from cu.
        (new_symbol_full): Use dwarf2_per_objfile from cu.
        (build_error_marker_type): Likewise.
        (lookup_die_type): Likewise.
        (determine_prefix): Likewise.
        (follow_die_offset): Likewise.
        (dwarf2_fetch_die_loc_sect_off): Use get_dwarf2_per_objfile.
        (dwarf2_fetch_constant_bytes): Don't call dw2_setup.
        (dwarf2_fetch_die_type_sect_off): Likewise.
        (dwarf2_get_die_type): Likewise.
        (follow_die_sig_1): Use dwarf2_per_objfile from cu.
        (get_signatured_type): Likewise.
        (get_DW_AT_signature_type): Likewise.
        (dwarf_decode_macro_bytes): Add dwarf2_per_objfile parameter.
        (dwarf_decode_macros): Use dwarf2_per_objfile from cu.
        (cu_debug_loc_section): Likewise.
        (fill_in_loclist_baton): Likewise.
        (dwarf2_symbol_mark_computed): Likewise.
        (dwarf2_find_containing_comp_unit): Change objfile parameter to
        dwarf2_per_objfile.
        (free_cached_comp_units): Use dwarf2_per_objfile passed in void*
        parameter.
        (age_cached_comp_units): Add dwarf2_per_objfile parameter.
        (free_one_cached_comp_unit): Use dwarf2_per_objfile from cu.
        (dwarf2_free_objfile): Use get_dwarf2_per_objfile.
        (set_die_type): Use dwarf2_free_objfile from cu.
        (get_die_type_at_offset): Likewise.
        (dwarf2_per_objfile_free): Don't assign global variable.
        (debug_names) <constructor>: Add dwarf2_per_objfile
        parameter, update m_debugstrlookup construction.
        (debug_names::debug_str_lookup): Add dwarf2_per_objfile
        parameter.
        <m_dwarf2_per_objfile>: New field.
        <lookup>: Use m_dwarf2_per_objfile.
        (check_dwarf64_offsets): Add dwarf2_per_objfile parameter.
        (psyms_seen_size): Likewise.
        (write_gdbindex): Replace objfile parameter with
        dwarf2_per_objfile.
        (write_debug_names): Likewise.
        (write_psymtabs_to_index): Likewise.
        (save_gdb_index_command): Use get_dwarf2_per_objfile, update
        calls.

2018-01-07  Simon Marchi  <simon.marchi@ericsson.com>

        * dwarf2read.c (struct dwarf2_cu) <objfile>: Remove.
        <dwarf2_per_objfile>: New field.
        (struct dwarf2_per_cu_data) <objfile>: Remove.
        <dwarf2_per_objfile>: New field.
        (create_cu_from_index_list): Assign dwarf2_per_objfile instead
        of objfile.
        (create_signatured_type_table_from_index): Likewise.
        (create_debug_type_hash_table): Likewise.
        (fill_in_sig_entry_from_dwo_entry): Likewise.
        (lookup_dwo_unit): Access objfile through dwarf2_per_objfile.
        (create_type_unit_group): Assign dwarf2_per_objfile instead of
        objfile.
        (create_partial_symtab): Access objfile through
        dwarf2_per_objfile.
        (process_psymtab_comp_unit_reader): Likewise.
        (read_comp_units_from_section): Likewise.
        (scan_partial_symbols): Likewise.
        (add_partial_symbol): Likewise.
        (add_partial_subprogram): Likewise.
        (peek_die_abbrev): Likewise.
        (fixup_go_packaging): Likewise.
        (process_full_comp_unit): Likewise.
        (process_full_type_unit): Likewise.
        (process_imported_unit_die): Likewise.
        (dwarf2_compute_name): Likewise.
        (dwarf2_physname): Likewise.
        (read_import_statement): Likewise.
        (create_cus_hash_table): Assign dwarf2_physname instead of
        objfile.
        (read_func_scope): Access objfile through dwarf2_per_objfile.
        (read_lexical_block_scope): Likewise.
        (read_call_site_scope): Likewise.
        (read_variable): Likewise.
        (dwarf2_rnglists_process): Likewise.
        (dwarf2_ranges_process): Likewise.
        (dwarf2_ranges_read): Likewise.
        (dwarf2_record_block_ranges): Likewise.
        (dwarf2_add_field): Likewise.
        (dwarf2_add_member_fn): Likewise.
        (read_structure_type): Likewise.
        (process_structure_scope): Likewise.
        (read_enumeration_type): Likewise.
        (read_array_type): Likewise.
        (read_common_block): Likewise.
        (read_namespace_type): Likewise.
        (read_namespace): Likewise.
        (read_module_type): Likewise.
        (read_tag_pointer_type): Likewise.
        (read_tag_ptr_to_member_type): Likewise.
        (read_tag_string_type): Likewise.
        (read_subroutine_type): Likewise.
        (read_typedef): Likewise.
        (read_base_type): Likewise.
        (attr_to_dynamic_prop): Likewise.
        (read_subrange_type): Likewise.
        (read_unspecified_type): Likewise.
        (load_partial_dies): Likewise.
        (read_partial_die): Likewise.
        (find_partial_die): Likewise.
        (guess_partial_die_structure_name): Likewise.
        (fixup_partial_die): Likewise.
        (read_attribute_value): Likewise.
        (read_addr_index_from_leb128): Likewise.
        (dwarf2_read_addr_index): Likewise.
        (dwarf2_string_attr): Likewise.
        (lnp_state_machine::check_line_address): Likewise.
        (dwarf_decode_lines_1): Likewise.
        (dwarf_decode_lines): Likewise.
        (dwarf2_start_symtab): Likewise.
        (var_decode_location): Likewise.
        (new_symbol_full): Likewise.
        (dwarf2_const_value_data): Likewise.
        (dwarf2_const_value_attr): Likewise.
        (dwarf2_const_value): Likewise.
        (die_type): Likewise.
        (die_containing_type): Likewise.
        (lookup_die_type): Likewise.
        (guess_full_die_structure_name): Likewise.
        (anonymous_struct_prefix): Likewise.
        (dwarf2_name): Likewise.
        (follow_die_ref_or_sig): Likewise.
        (follow_die_offset): Likewise.
        (follow_die_ref): Likewise.
        (dwarf2_fetch_die_loc_sect_off): Likewise.
        (dwarf2_fetch_constant_bytes): Likewise.
        (dwarf2_fetch_die_type_sect_off): Likewise.
        (dwarf2_get_die_type): Likewise.
        (follow_die_sig): Likewise.
        (decode_locdesc): Likewise.
        (dwarf2_per_cu_objfile): Likewise.
        (dwarf2_per_cu_text_offset): Likewise.
        (init_one_comp_unit): Assign dwarf2_per_objfile instead of
        objfile.
        (set_die_type): Access objfile through
        dwarf2_per_objfile.

2018-01-07  Simon Marchi  <simon.marchi@ericsson.com>

        * valprint.c (converted_character_d): Remove typedef.
        (DEF_VEC_O (converted_character_d)): Remove.
        (count_next_character): Use std::vector.
        (print_converted_chars_to_obstack): Likewise.
        (generic_printstr): Likewise.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * xml-support.h (struct gdb_xml_value): Add constructor.
        <value>: Change type to unique_xmalloc_ptr.
        (gdb_xml_value_s): Remove typedef.
        (DEF_VEC_O (gdb_xml_value_s)): Remove.
        (gdb_xml_element_start_handler): Change parameter type to
        std::vector.
        (xml_find_attribute): Likewise.
        * xml-support.c (xml_find_attribute): Change parameter type to
        std::vector and adjust.
        (gdb_xml_values_cleanup): Remove.
        (gdb_xml_parser::start_element): Adjust to std::vector.
        (xinclude_start_include): Change paraeter type to std::vector
        and adjust.
        * btrace.c (check_xml_btrace_version): Likewise.
        (parse_xml_btrace_block): Likewise.
        (parse_xml_btrace_pt_config_cpu): Likewise.
        (parse_xml_btrace_pt): Likewise.
        (parse_xml_btrace_conf_bts): Likewise.
        (parse_xml_btrace_conf_pt): Likewise.
        * memory-map.c (memory_map_start_memory): Likewise.
        (memory_map_start_property): Likewise.
        * osdata.c (osdata_start_osdata): Likewise.
        (osdata_start_item): Likewise.
        (osdata_start_column): Likewise.
        * remote.c (start_thread): Likewise.
        * solib-aix.c (library_list_start_library): Likewise.
        (library_list_start_list): Likewise.
        * solib-svr4.c (library_list_start_library): Likewise.
        (svr4_library_list_start_list): Likewise.
        * solib-target.c (library_list_start_segment): Likewise.
        (library_list_start_section): Likewise.
        (library_list_start_library): Likewise.
        (library_list_start_list): Likewise.
        * tracepoint.c (traceframe_info_start_memory): Likewise.
        (traceframe_info_start_tvar): Likewise.
        * xml-syscall.c (syscall_start_syscall): Likewise.
        * xml-tdesc.c (tdesc_start_target): Likewise.
        (tdesc_start_feature): Likewise.
        (tdesc_start_reg): Likewise.
        (tdesc_start_union): Likewise.
        (tdesc_start_struct): Likewise.
        (tdesc_start_flags): Likewise.
        (tdesc_start_enum): Likewise.
        (tdesc_start_field): Likewise.
        (tdesc_start_enum_value): Likewise.
        (tdesc_start_vector): Likewise.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * extension.h (struct xmethod_worker) <clone>: Remove.
        * python/py-xmethods.c (struct python_xmethod_worker) <clone>:
        Remove.
        (python_xmethod_worker::clone): Remove.
        * valops.c (find_overload_match): Use std::move instead of
        clone.

2018-01-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * extension-priv.h (enum ext_lang_rc): Remove, move to extension.h.
        (struct extension_language_ops) <clone_xmethod_worker_data>: Remove.
        <free_xmethod_worker_data>: Remove.
        <get_matching_xmethod_workers>: Chance VEC to std::vector.
        <get_xmethod_arg_types>: Remove.
        <get_xmethod_result_type>: Remove.
        <invoke_xmethod>: Remove.
        * extension.c (new_xmethod_worker): Remove.
        (clone_xmethod_worker): Remove.
        (get_matching_xmethod_workers): Return void, pass std::vector by
        pointer.
        (get_xmethod_arg_types): Rename to...
        (xmethod_worker::get_arg_types): ... this, and adjust.
        (get_xmethod_result_type): Rename to...
        (xmethod_worker::get_result_type): ... this, and adjust.
        (invoke_xmethod): Remove.
        (free_xmethod_worker): Remove.
        (free_xmethod_worker_vec): Remove.
        * extension.h (enum ext_lang_rc): Move here from
        extension-priv.h.
        (struct xmethod_worker): Add constructor and destructor.
        <data>: Remove.
        <value>: Remove.
        <invoke, clone, do_get_result_type, do_get_arg_types>: New
        virtual pure methods.
        <get_arg_types, get_result_type>: New methods.
        (xmethod_worker_ptr): Remove typedef.
        (DEF_VEC_P (xmethod_worker_ptr)): Remove.
        (xmethod_worker_vec): Remove typedef.
        (xmethod_worker_up): New typedef.
        (invoke_xmethod): Remove.
        (clone_xmethod_worker): Remove.
        (free_xmethod_worker): Remove.
        (free_xmethod_worker_vec): Remove.
        (get_xmethod_arg_types): Remove.
        (get_xmethod_result_type): Remove.
        * valops.c (find_method_list): Use std::vector, don't use
        intermediate vector.
        (value_find_oload_method_list): Use std::vector.
        (find_overload_match): Use std::vector.
        (find_oload_champ): Use std::vector.
        * value.c (value_free): Use operator delete.
        (value_of_xmethod): Rename to...
        (value_from_xmethod): ... this.  Don't assign
        xmethod_worker::value, take rvalue-reference.
        (result_type_of_xmethod): Adjust.
        (call_xmethod): Adjust.
        * value.h: Include extension.h.
        (struct xmethod_worker): Don't forward-declare.
        (value_of_xmethod): Rename to...
        (value_from_xmethod): ... this, take rvalue-reference.
        * python/py-xmethods.c (struct gdbpy_worker_data): Rename to...
        (struct python_xmethod_worker): ... this, add constructor and
        destructor.
        <invoke, clone, do_get_arg_types, do_get_result_type>: Implement.
        (gdbpy_free_xmethod_worker_data): Rename to...
        (python_xmethod_worker::~python_xmethod_worker): ... this and
        adjust.
        (gdbpy_clone_xmethod_worker_data): Rename to...
        (python_xmethod_worker::clone): ... this and adjust.
        (gdbpy_get_matching_xmethod_workers): Use std::vector, don't use
        temporary vector.
        (gdbpy_get_xmethod_arg_types): Rename to...
        (python_xmethod_worker::do_get_arg_types): ... this and adjust.
        (gdbpy_get_xmethod_result_type): Rename to...
        (python_xmethod_worker::do_get_result_type): ... this and
        adjust.
        (gdbpy_invoke_xmethod): Rename to...
        (python_xmethod_worker::invoke): ... this and adjust.
        (new_python_xmethod_worker): Rename to...
        (python_xmethod_worker::python_xmethod_worker): ... this and
        adjust.
        * python/python-internal.h (gdbpy_clone_xmethod_worker_data):
        Remove.
        (gdbpy_free_xmethod_worker_data): Remove.
        (gdbpy_get_matching_xmethod_workers): Use std::vector.
        (gdbpy_get_xmethod_arg_types): Remove.
        (gdbpy_get_xmethod_result_type): Remove.
        (gdbpy_invoke_xmethod): Remove.
        * python/python.c (python_extension_ops): Remove obsolete
        callbacks.

2018-01-05  Pedro Alves  <palves@redhat.com>

        PR gdb/18653
        * common/signals-state-save-restore.c
        (save_original_signals_state): New parameter 'quiet'.  Warn if we
        find a custom handler preinstalled, instead of internal erroring.
        But only warn if !quiet.
        * common/signals-state-save-restore.h
        (save_original_signals_state): New parameter 'quiet'.
        * main.c (captured_main_1): Move save_original_signals_state call
        after option handling, and pass QUIET.

2018-01-05  Pedro Alves  <palves@redhat.com>

        * spu-tdep.c (spu_catch_start): Pass
        symbol_name_match_type::SEARCH_NAME to block_lookup_symbol.

2018-01-05  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * ada-lang.c (literal_symbol_name_matcher): New function.
        (ada_get_symbol_name_matcher): Use it for
        symbol_name_match_type::SEARCH_NAME.
        * block.c (block_lookup_symbol): New parameter 'match_type'.  Pass
        it down instead of assuming symbol_name_match_type::FULL.
        * block.h (block_lookup_symbol): New parameter 'match_type'.
        * c-valprint.c (print_unpacked_pointer): Use
        lookup_symbol_search_name instead of lookup_symbol.
        * compile/compile-object-load.c (get_out_value_type): Pass down
        symbol_name_match_type::SEARCH_NAME.
        * cp-namespace.c (cp_basic_lookup_symbol): Pass down
        symbol_name_match_type::FULL.
        * cp-support.c (cp_get_symbol_name_matcher): Handle
        symbol_name_match_type::SEARCH_NAME.
        * infrun.c (insert_exception_resume_breakpoint): Use
        lookup_symbol_search_name.
        * p-valprint.c (pascal_val_print): Use lookup_symbol_search_name.
        * psymtab.c (maintenance_check_psymtabs): Use
        symbol_name_match_type::SEARCH_NAME and SYMBOL_SEARCH_NAME.
        * stack.c (print_frame_args): Use lookup_symbol_search_name and
        SYMBOL_SEARCH_NAME.
        * symtab.c (lookup_local_symbol): Don't demangle the lookup name
        if symbol_name_match_type::SEARCH_NAME.
        (lookup_symbol_in_language): Pass down
        symbol_name_match_type::FULL.
        (lookup_symbol_search_name): New.
        (lookup_language_this): Pass down
        symbol_name_match_type::SEARCH_NAME.
        (lookup_symbol_aux, lookup_local_symbol): New parameter
        'match_type'.  Pass it down.
        * symtab.h (symbol_name_match_type::SEARCH_NAME): New enumerator.
        (lookup_symbol_search_name): New declaration.
        (lookup_symbol_in_block): New 'match_type' parameter.

2018-01-05  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * ada-lang.c (ada_lookup_encoded_symbol): Reimplement in terms of
        ada_lookup_symbol.
        (ada_lookup_symbol): Reimplement in terms of
        ada_lookup_symbol_list, bits factored out from
        ada_lookup_encoded_symbol.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        * ada-exp.y (write_object_renaming): When subscripting an array
        using a symbol as the index, pass the block in call to
        ada_lookup_encoded_symbol when looking that symbol up.

2018-01-05  Jerome Guitton  <guitton@adacore.com>

        * ada-lang.c (ada_array_length): Use ada_index_type instead of
        TYPE_INDEX_TYPE.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_to_fixed_value_create): Add handling of
        the case where VALUE_LVAL (val0) is not lval_memory.

2018-01-05  Xavier Roirand  <roirand@adacore.com>

        * ada-valprint.c (print_optional_low_bound): Handle
        character-indexed array printing like boolean-indexed array
        printing.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        GDB 8.1 branch created (5219ac6237c272b938c28517bf371429260c71e7):
        * version.in: Bump version to 8.1.50.DATE-git.

2018-01-03  Xavier Roirand  <roirand@adacore.com>

        * ada-lang.h (ada_exception_catchpoint_kind) <ada_catch_handlers>:
        Add field.
        * ada-lang.c (struct exception_support_info) <catch_handlers_sym>:
        Add field.
        (default_exception_support_info) <catch_handlers_sym>: Add field.
        (exception_support_info_fallback) <catch_handlers_sym>: Add field.
        (ada_exception_name_addr_1): Add "catch handlers" handling.
        (ada_exception_catchpoint_cond_string) <ex>: New parameter.
        Update all callers.
        (create_excep_cond_exprs) <ex>: Add parameter.
        (re_set_exception): Update create_excep_cond_exprs call.
        (print_it_exception, print_one_exception, print_mention_exception)
        (print_recreate_exception): Add "catch handler" handling.
        (allocate_location_catch_handlers, re_set_catch_handlers)
        (check_status_catch_handlers, print_it_catch_handlers)
        (print_one_catch_handlers, print_mention_catch_handlers)
        (print_recreate_catch_handlers): New function.
        (catch_handlers_breakpoint_ops): New variable.
        (catch_ada_exception_command_split) <is_catch_handlers_cmd>:
        Add parameter.  Add "catch handler" handling.
        (ada_exception_sym_name, ada_exception_breakpoint_ops):
        Add "catch handler" handling.
        (ada_exception_catchpoint_cond_string): Add "catch handler"
        handling.
        (create_ada_exception_catchpoint): Update create_excep_cond_exprs
        call.
        (catch_ada_handlers_command): New function.
        (initialize_ada_catchpoint_ops): Initialize "catch handlers"
        operations structure.
        (_initialize_ada_language): Add "catch handlers" command entry.
        * NEWS: Document "catch handlers" feature.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

        * ada-lang.c (ada_value_slice_from_ptr): Take array stride into
        account when creating the array type of the slice.
        (ada_value_slice): Likewise.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

        * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_BYTE_STRIDE>:
        New enum value.
        (create_array_type_with_stride): Add byte_stride_prop parameter.
        * gdbtypes.c (create_array_type_with_stride) <byte_stride_prop>:
        New parameter.  Update all callers in this file.
        (array_type_has_dynamic_stride): New function.
        (is_dynamic_type_internal, resolve_dynamic_array): Add handling
        of arrays with dynamic byte strides.
        * dwarf2read.c (read_array_type): Add support for dynamic
        DW_AT_byte_stride attributes.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

        * dwarf2read.c (read_unspecified_type): Treat
        DW_TAG_enumeration_type DIEs from Ada units as stubs.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

        Update copyright year range in all GDB files.

2018-01-01, 18  Joel Brobecker  <brobecker@adacore.com>

        * copyright.py (BY_HAND): Remove gdb/testsuite/gdb.base/step-line.inp
        and gdb/testsuite/gdb.base/step-line.c.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

        * copyright.py (main): Dump the contents of
        MULTIPLE_COPYRIGHT_HEADERS (separately) from BY_HAND,
        even if BY_HAND is empty.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Update Copyright year in version
        message.

2018-01-01  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2017.

For older changes see ChangeLog-2017.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: