1 2000-02-16 Mark Kettenis <kettenis@gnu.org>
3 * configure: Regenerated.
5 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
7 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
8 _initialize_arm_tdep): Allows the user to choose between any of
9 the flavors available for the disassembly to be used in the "info
10 reg" command and elsewhere in gdb. It prevents having to maintain
11 this information in two places by using the data kept in the
14 2000-02-09 Mark Kettenis <kettenis@gnu.org>
16 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
17 prfpregset_t in <sys/procfs.h>.
18 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
20 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
21 prgregset_t and prfpregset_t if they are not already present.
23 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
25 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
26 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
28 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
30 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
33 2000-02-15 Kevin Buettner <kevinb@redhat.com>
36 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
37 to correct value for generic dummy frames. When using
38 generic dummy frames, don't attempt to write TOC value or
39 function to call into the call dummy.
40 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
41 code to also handle the PowerOpen ABI.
42 (ppc_push_return_address): Enable for all ports.
43 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
44 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
45 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
46 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
47 provided by generic RS6000 definitions so that call dummies
48 are implemented using generic dummy frames instead.
50 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
51 prior to changing the stack pointer via ptrace(). Also, ignore
52 attempts to store to undefined registers that are less than
55 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
56 frame from 436 to 448 to account for alignment padding.
57 (rs6000_push_arguments): Obtain actual register size instead
58 of assuming the register is 4 bytes long. [There's still
59 more work to be done to totally remove the 4 byte assumption,
60 however.] Make sure the stack is 16 byte aligned as required
61 by the PowerOpen ABI. Also, make sure that small structures
62 passed in registers are properly aligned within the register.
64 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
66 Patch applied by Kevin Buettner <kevinb@redhat.com>
68 * rs6000-tdep.c (skip_prologue): skip copying of argument
69 registers to local variable registers.
71 2000-02-14 Jim Kingdon <kingdon@redhat.com>
73 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
74 sym->section->index number is not a SECT_OFF_* code.
76 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
78 * MAINTAINERS (write after approval): Add H.J. Lu.
80 2000-02-14 Nick Clifton <nickc@cygnus.com>
82 * sh-tdep.c: Remove extraneous code.
84 2000-02-14 Amit S. Kale <akale@veritas.com>
86 * elfread.c (elf_symtab_read): Move the use of sym to after where
88 Checked in by Jim Kingdon <kingdon@redhat.com>
90 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
92 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
94 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
96 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
97 * dwarf2read.c: (die_is_declaration): New fn.
98 (read_structure_scope): Use it.
100 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
102 2000-02-10 J.T. Conklin <jtc@redback.com>
104 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
105 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
107 * gdbserver/low-nbsd.c: New file.
109 * gdbserver/Makefile.in: convert to autoconf.
110 * gdbserver/configure.in: likewise.
111 * gdbserver/configure: generate.
113 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
115 * CONTRIBUTE: New file. How to contribute to GDB.
117 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
119 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
120 Buettner to powerpc maintainers. Make Kevin Buettner the
121 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
122 and Jason Molenda to write after aproval list.
124 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
126 * MAINTAINERS: Reformat. Separate into check-in categories.
128 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
130 * uw-thread.c: Remove __FUNCTION__ GNUism.
132 2000-01-17 Amit S. Kale <akale@veritas.com>
134 * elfread.c (elf_symtab_read): Use offset for the section in which a
135 symbol resides, instead of .text section for calculating address of a
137 Checked in by Jim Kingdon <kingdon@redhat.com>
139 2000-02-10 Mark Kettenis <kettenis@gnu.org>
141 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
142 no longer necessary now we have gdb_wait.h.
144 2000-02-09 Mark Kettenis <kettenis@gnu.org>
146 * gnu-nat.c (proc_string): Make global.
147 (do_mach_notify_dead_name): Suppress dead name notifications if we
148 know that the task is dead.
150 1999-12-13 Mark Kettenis <kettenis@gnu.org>
152 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
153 instead of directly from the kernel. Add some hackery to make
154 sure that the info isn't influenced by suspension of the task in
155 the proc server itself.
157 2000-02-10 Jim Kingdon <kingdon@redhat.com>
159 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
160 approved by Michael Snyder.
162 2000-02-09 Mark Kettenis <kettenis@gnu.org>
164 * linux-thread.c: Include defs.h before gdb_wait.h.
166 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
168 * Makefile.in (wait_h): Delete macro. Update all dependencies
169 specifying gdb_wait.h instead.
171 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
172 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
173 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
174 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
175 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
176 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
177 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
178 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
179 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
180 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
182 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
184 * gdb_wait.h: New file. Based on ../include/wait.h. Include
185 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
187 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
189 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
190 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
191 (d10v_stack_align): Declare.
192 * d10v-tdep.c (d10v_stack_align): Define.
194 1999-08-23 J.T. Conklin <jtc@redback.com>
196 * top.c (remote_timeout): Change default to 2. Add comment
197 explaining history of changes to the default value.
198 * remote.c (_initialize_remote): Remove code that adds set/
199 show remotetimeout, as that's also done in top.c
201 1999-10-18 J.T. Conklin <jtc@redback.com>
203 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
204 Return E01 instead of P01 when 'P' command fails.
206 2000-02-05 J.T. Conklin <jtc@redback.com>
208 * remote.c (putpkt_binary): Handle NAK from target stub.
210 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
212 * configure.in: Remove the addition of sol-thread.c to the
213 CONFIG_INITS list. This caused problems with init.c, because
214 sol-thread.c would be grepped twice for _initialize_* functions.
216 * Makefile.in: Add FIXME for init.c.
218 2000-02-07 Jim Kingdon <kingdon@redhat.com>
220 Clean up compiler warnings:
221 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
222 stack.c, valprint.c: Change variables to unsigned.
223 * bcache.c: Rearrange to avoid warnings about variables not being set.
224 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
225 rather than declaring print_max and repeat_count_threashold
226 ourselves (incorrectly).
227 * valprint.h: Do declare repeat_count_threashold.
228 * ch-exp.c: Use default case for internal error.
229 * findvar.c: Don't omit argument type.
230 * symtab.c: Remove unused variable.
232 2000-02-04 Jim Blandy <jimb@redhat.com>
234 * c-typeprint.c (remove_qualifiers): New function.
235 (c_type_print_base): Use it to remove qualifiers from C++
236 qualified names, not strrchr.
238 * c-typeprint.c (c_type_print_base): Recognize type conversion
239 operators by calling is_type_conversion_operator.
240 (is_type_conversion_operator): New function.
242 2000-02-04 Nick Clifton <nickc@cygnus.com>
244 * config/arm/tm-arm.h (LOWEST_PC): Define.
246 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
248 * infrun.c (resume): Make just one call to target_resume(), instead
249 of four: set up correct parameters in all the cases ahead of time,
250 and do call at the end.
252 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
254 * config/powerpc/tm-ppc-eabi.h: Define
255 SOFUN_ADDRESS_MAYBE_MISSING.
257 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
259 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
262 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
264 * Makefile.in (INIT_FILES): Append CONFIG_INITS
265 * configure.in (CONFIG_INIT): Initialize.
266 (links): Link srcdir/gdbtk/library to gdbtcl2.
267 * gdbtcl2: Moved to gdbtk/library.
268 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
269 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
270 gdbtk.h: Moved to gdbtk/generic.
272 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
274 * printcmd.c (build_address_symbolic): New function. Returns all
275 the parts that are necessary to print an address in a symbolic
277 (print_address_symbolic): Split into a printing part and an
278 information building part, build_address_symbolic().
280 * defs.h (build_address_symbolic): Export.
282 2000-02-03 Jim Blandy <jimb@redhat.com>
284 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
287 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
289 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
290 arguments on dummy frames.
292 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
294 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
295 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
297 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
299 * remote.c (getpkt_sane): New function. It is the old getpkt(),
300 which now returns a timeout indication.
301 (getpkt): New function. Wrapper for getpkt_sane(), so that return
302 value can still be ignored.
304 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
306 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
309 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
311 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
312 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
315 * Makefile.in: Update.
317 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
318 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
319 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
320 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
321 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
322 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
323 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
324 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
325 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
326 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
327 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
328 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
329 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
330 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
331 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
332 config/pa/tm-hppa.h: Update.
333 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
335 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
337 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
338 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
339 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
340 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
341 config/m88k/delta88v4.mh, config/mips/irix4.mh,
342 config/mips/irix5.mh, config/mips/mipsv4.mh,
343 config/powerpc/solaris.mh (NATDEPFILES): Change references to
344 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
345 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
347 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
349 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
351 * main.c (captured_main): Only use the legacy tui_file code when
352 linking in older code such as the TUI.
354 * gdb-file.h, gdb-file.c: New files.
355 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
356 null_file_isatty, null_file_rewind, null_file_put,
357 null_file_flush, null_file_write, null_file_fputs,
358 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
359 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
360 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
361 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
362 set_gdb_file_data, struct accumulated_gdb_file,
363 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
364 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
365 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
366 stdio_file_delete, stdio_file_flush, stdio_file_write,
367 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
368 Moved to gdb-file.h and gdb-file.c.
369 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
370 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
371 tui_file_rewind, tui_file_put, tui_file_fputs,
372 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
373 fputs_unfiltered_hook):
374 Moved to tui/tui-file.c and tui/tui-file.h.
376 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
377 (tui-file.o, gdb-file.o): Add dependencies.
378 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
379 * main.c: #include tui/tui-file.h.
381 2000-01-28 Fred Fish <fnf@cygnus.com>
383 * findvar.c (value_from_register): Special case handling of D10V
384 pointer values fetched from registers.
386 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
388 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
389 support for new style thumb prologues.
391 2000-01-28 Nick Clifton <nickc@redhat.com>
393 * arm-tdep.c: Remove extraneous dash at start of strings
394 introduced in previous delta.
396 2000-01-27 Nick Clifton <nickc@redhat.com>
398 * arm-tdep.c: Replace uses of arm_toggle_renames() with
399 parse_arm_disassembler_option().
401 2000-01-27 Jim Blandy <jimb@cygnus.com>
403 * symtab.c (decode_line_1): Don't let commas that are within
404 quotes or parenthesis terminate the line spec. Don't use pp when
405 removing the final double quote of a double-quoted string. Don't
406 forget to skip the opening double quote. I have no clue whether
407 this change is correct; probably we've just moved this function
408 from one buggy place to another buggy place, and never came within
409 an outhouse whiff of correctness.
410 (find_toplevel_char): New function.
412 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
414 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
415 passing the pointer to a thumb function as an argument.
417 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
419 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
420 are reinserted for another run.
422 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
424 * cli-out.c (cli_filed_string): Test for NULL string.
426 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
428 * infcmd.c (run_stack_dummy): Account for a random signal stopping
429 the inferior as well as breakpoints being hit while performing an
430 inferior function call.
431 * valops.c (hand_function_call): Ditto.
433 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
435 From Mark Kettenis <kettenis@gnu.org>
437 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
438 i386_REGS_SEGS_STATE.
439 (HAVE_I387_REGS): Define.
440 (FLOAT_INFO): Remove.
441 * i386gnu-nat.c: Almost completely rewritten to use new i386
442 register layout and `float info' implementation.
443 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
444 Move prototypes from here.
445 * gnu-nat.h: To here.
447 2000-01-24 Kevin Buettner <kevinb@redhat.com>
449 * utils.c (get_field, put_field): Fix buffer underruns and
450 overruns. Also, handle case where total_len is not evenly
452 (getfield): Make sure zeroing of unwanted bits occurs even
453 when bit field to extract does not straddle two or more
456 2000-01-23 Christopher Faylor <cgf@cygnus.com>
458 * defs.h: Add gdb_thread_select declaration.
460 2000-01-23 Kevin Buettner <kevinb@redhat.com>
462 * linux-thread.c (_initialize_linuxthreads): Make sure that
463 linuxthreads_block_mask does not block SIGCHLD.
465 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
467 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
468 text so that new lines work properly.
470 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
472 * proc-utils.h: New file. Export functions from proc-*.c.
474 * proc_api.c: Rename to:
475 * proc-api.c: New file. Add include of proc-utils.h.
477 * proc_events.c: Rename to:
478 * proc-events.c: New file.
480 * proc_flags.c: Rename to:
481 * proc-flags.c: New file.
483 * proc_why.c: Rename to:
484 * proc-why.c: New file. Add include of proc-utils.h.
486 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
487 ctype.h, proc-utils.h.
488 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
489 (open_procinfo_files): Conditionalize local variable tmp, to avoid
491 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
493 (procfs_wait): Adjust format in some printf_filetered calls to
494 avoid compiler warnings.
495 (make_signal_thread_runnable): Ifdef 0. The calls to this function
497 (procfs_resume): Add parentheses around '&&' operation.
498 (procfs_set_exec_trap): Remove unused variable.
499 (info_proc_cmd): Add braces to avoid ambiguous else clause.
501 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
502 proc-why.o): Update dependencies.
504 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
507 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
509 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
510 Fix from Robert Lipe <robertl@sco.com>.
511 * configure: Regenerated.
513 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
515 * stack.c (print_frame_info_base): Break up into the frame info
516 (location) printing part and the rest (source line printing).
517 (print_frame): New function. Take care of printing the location
521 * infrun.c (normal_stop): Use enum values rather than integers for the
522 source_flag to be passed to show_and_print_stack_frame().
525 * frame.h (print_what): New enum for 'source' argument to
526 print_frame_info_base(). Use this instead of obscure numbers.
529 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
531 * event-top.c (stdin_event_handler): call quit_command rather than
532 exit -- run cleanups, give target code a chance to say goodbye to
533 the target. Fixes bug where the inferior processes were left
534 around on Solaris (and probably elsewhere) by the testsuite.
536 2000-01-14 Mark Salter <msalter@cygnus.com>
538 * v850-tdep.c (v850_target_architecture_hook): Setup correct
539 machine id for disassembly.
541 2000-01-13 Jim Blandy <jimb@cygnus.com>
543 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
544 convert_to_regset, when regno indicates a specific register.
546 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
548 * uw-thread.c: Document libthread.so debugging interface. Minor
549 comment and formatting tweaks.
550 (DEBUG): #define as 0 instead of 1.
551 (CALL_BASE): Include function name in error msg.
552 (libthread_stub): Adjust inferior_pid after thread exit.
553 (uw_thread_create_inferior): Deactivate uw_thread_ops before
554 asking procfs_ops to create inferior.
555 (libthread_init): Don't return nonlocally on error.
557 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
559 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
562 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
564 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
565 both sides are on the same state.
567 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
569 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
570 115200 (minor syntax mistake).
572 2000-01-12 Jim Blandy <jimb@cygnus.com>
574 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
575 this here, to go along with the definitions of PIDGET and TIDGET.
577 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
579 * thread.c (do_captured_thread_select): New function. Switch
580 current thread, safely from within catch_errors().
581 (gdb_thread_select): New function. Switch threads safely.
582 (thread_command): Use gdb_thread_select().
584 (do_captured_list_thread_ids): New function.
585 (gdb_list_thread_ids): New function.
587 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
589 2000-01-11 Christopher Faylor <cgf@cygnus.com>
591 * configure.in: Avoid linking -limagehlp unless it's a native build.
592 * configure: Regenerate.
593 * thread.cc (add_thread): Clear private data pointer here or suffer
594 strange behavior when it is checked for NULL later.
596 2000-01-09 Christopher Faylor <cgf@cygnus.com>
598 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
599 * configure.in: Add an additional library to cygwin link.
600 * configure: Regenerate.
602 Patch from Egor Duda <deo@logos-m.ru>:
603 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
606 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
608 * uw-thread.c: New file to support UnixWare user-mode threads:
609 contributed by Nickolas Duffek <nsd@cygnus.com>.
610 * target.h (struct target_ops): New vector, to_extra_thread_info,
611 allows back-ends to give extra details in info thread display.
612 (target_extra_thread_info): define new macro.
613 (target_find_new_threads): simplify macro. Cleanup comments.
614 * target.c (to_extra_thread_info): default and inherit new vector.
615 (cleanup_target): eliminate PARAMS, break up long lines,
616 provide default definition for to_extra_thread_info, and
617 to_find_new_threads. Default to_thread_alive and to_query
618 to return_zero, not target_ignore (they each return int not void).
619 (debug_to_find_new_threads): new debug entry.
620 (setup_target_debug): add debug_to_find_new_threads.
621 * gdbthread.h: export struct thread_info, find_thread_pid, and
622 iterate_over_threads. Add comments. Eliminate PARAMS. Update
623 copyright. Add new private data pointer for use by target back-ends.
624 * thread.c (struct thread_info): move definition to gdbthread.h.
625 (find_thread_pid): new exported function for thread lookup.
626 (iterate_over_threads): new exported function for applying
627 arbitrary operations to threads. Update copyright to 2000.
628 (info_threads_command): use new target_extra_thread_info vector
629 to display extra information about each thread (if implemented).
630 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
631 Add defines for PIDGET, etc.
632 * config/i386/tm-i386sol2.h: ditto.
633 * config/sparc/tm-sun4sol2.h: ditto.
634 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
635 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
636 if -lpthread and -lpthreads fail.
638 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
639 (proc_flags): combine flags that UnixWare splits into two locations.
640 (proc_modify_flag): add support for PR_KLC (kill on last close).
641 (proc_[un]set_kill_on_last_close): new functions.
643 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
645 * infrun.c (normal_stop): Print out thread id when we stop.
647 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
649 * remote.c (remote_open_1): Fix message so it does not imply a
650 specific syntax for serial ports, as it is OS dependent.
651 (remote_async_open_1): Ibid.
652 (init_remote_ops): Ibid.
654 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
656 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
657 "set remotebaud" command (if set) when no speed is specified on
658 the "target rdi" command.
660 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
662 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
664 (baud_options[]): Ibid.
666 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
668 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
669 used by each operating system.
671 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
673 * breakpoint.c (until_break_command): Add an argument for the
674 continuation, the beginning of the cleanups set up by this
676 (until_break_command_continuation): Do cleanups until the one
677 passed in as argument instead of doing all of them.
679 * infcmd.c (finish_command_continuation): Expect a new argument,
680 which indicates up to where to do cleanups. Update calls to
681 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
682 (finish_command): Add another argument for the continuation: the
683 starting cleanup for this command.
685 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
687 From Grant Edwards <grante@visi.com> (original patch from Thomas
689 * rdi-share/ardi.c: Allow interruption of interruptible
690 targets with a <CNTL-C>.
692 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
694 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
695 to control port to accommodate some versions of Angel.
697 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
699 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
700 Add interpretation for C Support Library packets.
702 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
704 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
705 is now being modified.
706 * rdi-share/devsw.h: Adjust declaration of the above funtion.
708 For older changes see ChangeLog-99
714 version-control: never