* mdebugread.c (new_psymtab): Pass in section_offsets and set
[deliverable/binutils-gdb.git] / gdb / ChangeLog
1 Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2
3 * mdebugread.c (new_psymtab): Pass in section_offsets and set
4 them in the pst.
5 * mdebugread.c (handle_psymbol_enumerators): New function to enter
6 the enumerators of an ecoff enum into the partial symbol table.
7 * mdebugread.c (parse_partial_symbols): Call it.
8 * symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
9 * symmisc.c (dump_psymtab): Fix typo, clean up output of section
10 offsets. Cast psymtab->read_symtab to PTR before passing it to
11 gdb_print_address.
12 * i386-tdep.c (i386_skip_prologue): Skip over instructions that
13 set up the global offset table pointer in pic compiled code.
14 * config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
15 error() on TYPE_CODE_FLT arguments whose size is greater than 8,
16 swap all other TYPE_CODE_FLT arguments as mips_push_arguments
17 ensures that floats are promoted to doubles before they are pushed
18 on the stack.
19
20 Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com)
21
22 * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
23 Fixup cache_on and flush_i_cache so that they work for both the
24 930 and 932 processors. Rewrite most low level funcs (uart
25 access & cache stuff) to use new ASI access macros in sparclite.h.
26 Also make it easy to access second serial port.
27
28 Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
29
30 * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
31 <sys/stat.h>; not needed.
32
33 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
34
35 * stack.c (print_frame_info): In "pathological" case, don't
36 distrust the line number information.
37
38 Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com)
39
40 * mips-tdep.c (mips_print_register): handle 64 bits register.
41 * valprint.c (print_longest): fix a bug in printing 64 bits value.
42
43 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
44
45 * Version 4.12.2.
46
47 * Makefile.in (install): Do the sed for program_transform_name
48 ourselves instead of worrying about INSTALL_XFORM. This enables
49 users to override INSTALL_PROGRAM in the standard way.
50
51 * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
52 depend on Makefile.in.
53
54 * defs.h, valprint.c: Make longest_to_int a function not a macro.
55 Only test against INT_MIN if a LONGEST is bigger than an int.
56
57 * README: Change GhostScript to Ghostscript.
58
59 Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com)
60
61 * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
62 Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
63 character file names.
64 * Makefile.in (ALLPARAM): Add these files.
65
66 * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
67 character file names.
68 * Makefile.in: Add Kung's new mips64 files.
69
70 Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com)
71
72 * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
73 mips64el-*-ecoff and mips64-big-*.
74 * defs.h: get rid of FORCE_LONG_LONG.
75 * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
76 parsing. Change register size to be MIPS_REGSIZE.
77
78 Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com)
79
80 * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,
81 osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c,
82 xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
83
84 Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
85
86 * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
87 (remove_commands, add_commands): Add/remove hms-drain when target
88 is connected.
89
90 Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com)
91
92 * configure.in: Add Lynx/rs6000 support.
93 * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
94 messages. Add rs6000 support. Don't try to modify unwritable
95 registers.
96 * rs6000-nat.c: Move lots of native dependent stuff (like core
97 file support) from rs6000-tdep.c & xcoffexec.c to here.
98 * rs6000-tdep.c: Move native dependent stuff to nat.c.
99 * xcoffexec.c: Move native dependent stuff to nat.c.
100 * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
101 from tm file.
102 * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
103 really native.
104 * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
105 New files to support Lynx/rs6000.
106
107 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
108
109 * README: Remove note about gcc warnings on alpha, these should be
110 gone now.
111 * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
112 m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
113 remote-utils.c, stabsread.c: Include <string.h>.
114 * regex.c: Include "defs.h", change re_comp argument to const char *.
115 * infptrace.c (fetch_register, store_inferior_registers): Change
116 regaddr to type CORE_ADDR.
117 * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
118 Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
119
120 Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
121
122 * symtab.h: Always define BYTE_BITFIELD to nothing.
123
124 Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
125
126 * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
127 * configure.in: Remove comment about m68k-em.mt.
128 * Makefile.in: Remove references.
129
130 Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
131
132 * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
133 BFD_HOST_64_TYPE.
134
135 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
136
137 * target.c (target_preopen): If target_kill doesn't remove the
138 target from the stack, use pop_target to do it.
139
140 * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
141 of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
142 changes to stabsread.c from summer 1993.
143
144 * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
145 printing the program, rather than passing NULL to printf.
146 (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
147 try to call UDIDisconnect again. Print better message.
148 (udi_kill): Just call UDIDisconnect ourselves, rather than doing
149 it via udi_close.
150 (udi_create_inferior): If udi_session_id is negative, open a new
151 TIP rather than giving an error.
152
153 * config/mips/mipsm3.mh, config/i386/i386m3.mh,
154 config/ns32k/ns32km3.mh: Define NAT_FILE.
155 * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
156 (it was inconsistent and namespace-wrong) to NM_M3_H.
157 * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
158 (m3_open): New function.
159 (m3_ops): Use it.
160 * TODO: Update Mach section.
161
162 * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
163
164 Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
165
166 * printcmd.c (printf_command): Add missing single-letter
167 backslash-escape sequences, and improve error message.
168
169 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
170
171 * corelow.c (solib_add_stub, core_open): Pass address of from_tty
172 rather than trying to shove an int into a pointer and back out
173 again. This avoids compiler warnings.
174
175 * defs.h (alloca): Declare as void *, not char *, on hpux.
176 Don't prototype it, just declare the return type.
177
178 Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
179
180 * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
181 (REGISTER_CONVERT_TO_RAW): Add missing backslash.
182
183 Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
184
185 * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
186 ZERO_REGNUM, just read it as zero without talking to the board.
187
188 * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
189 backslash.
190 * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
191 to store_floating, not nonexistent variable len.
192
193 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
194 New functions.
195 (mips_store_word): Change calling convention to return errors, and
196 to provide old contents if the caller wants it.
197 (mips_xfer_memory): Deal with errors from mips_store_word.
198 * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
199 define now that remote-mips.c doesn't use BREAKPOINT.
200
201 * remote-mips.c (mips_create_inferior): Call warning if arguments
202 specified, and then execute "set args" command. Call error, not
203 mips_error, if executable file not specified.
204
205 * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
206 remote_debug.
207
208 * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
209 to unsigned int.
210
211 Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
212
213 * value.h (print_longest): Rename "value" to "val" in prototype
214 declaration because some compilers don't like arguments whose
215 names are the same as types.
216 * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
217 before passing it to remote_*_bytes.
218
219 Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
220
221 * h8500-tdep.c (saved_pc_after_call): The size of the
222 pc is memory model dependent. (segmented_command,
223 unsegmented_command, _initialize_h8500_tdep): New commands to
224 change memory model.
225 * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
226 command.
227 * remote-hms.c (hms_load): Remove breakpoints when loaded.
228 (hms_wait): Use new status structure
229 (hms_open): Push the target here. (hms_before_main_loop): Not
230 here. (supply_val, hms_fetch_register, hms_store_register): Cope
231 with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
232 * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
233 all registers in a compact way.
234
235 Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
236
237 * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
238 as CORE_ADDR to match definition in rs6000-tdep.c.
239
240 Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
241
242 * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
243 * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
244 definitions into the psymtab.
245
246 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
247
248 * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
249 a special exceptionSize for the 68332.
250
251 * remote-udi.c (udi_attach): If no arguments, print error.
252
253 Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
254
255 * Makefile.in (VERSION): Bump to 4.12.1
256 * NEWS, README: Update to match 4.12 release.
257
258 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
259
260 * command.c (empty_sfunc): New function.
261 (add_set_cmd): Use it instead of not_just_help_class_command.
262 (not_just_help_class_command): Change calling convention back to
263 what it was before yesterday's change.
264
265 * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
266 of the type if present.
267
268 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
269
270 * printcmd.c (decode_format): Don't blithely set the size for
271 an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
272
273 * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
274 If BFD64, make a LONGEST a BFD_HOST_64_BIT.
275 * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
276 always just check against INT_MIN and INT_MAX (this also fixes things
277 if sizeof (long) > sizeof (int), e.g. Alpha).
278 * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
279 Don't define LONGEST or BUILTIN_TYPE_LONGEST.
280 * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
281 BUILTIN_TYPE_UNSIGNED_LONGEST.
282 * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
283 longest_int and longest_unsigned_int.
284 * value.h (struct value): Just align to LONGEST, rather than worrying
285 about CC_HAS_LONG_LONG.
286 * valarith.c (value_binop): Figure out type ourself based on
287 sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
288 point is that we don't depend on CC_HAS_LONG_LONG anymore.
289 * valprint.c (val_print_type_code_int): Just call
290 extract_unsigned_integer directly, rather than going through
291 unpack_long.
292 * printcmd.c (decode_format): Remove code which would sometimes
293 change 'g' size to 'w' for integers. print_scalar_formatted handles
294 printing huge integers well enough, thank you.
295
296 * command.c (add_set_cmd, not_just_help_class_command): Change
297 to make this the sfunc, not cfunc, since that is how we call it.
298 * command.h: Comment difference between sfunc and cfunc.
299 * demangle.c (set_demangling_command): Add third arg since that
300 is how it is called.
301 (_initialize_demangler): Use sfunc, not cfunc, for
302 set_demangling_command, since that is how it is called.
303 Remove show_demangling_command; it has no effect.
304
305 * command.c (shell_escape): Report errors correctly (with error
306 message from strerror).
307
308 Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
309
310 * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
311 x_scnlen.l rather than x_scnlen to match corresponding change in
312 coff/internal.h.
313
314 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
315
316 * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
317 Change comments regarding TYPE_CODE_BOOL.
318 * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
319 regardless of the language.
320 (value_true): Just call value_logical_not regardless of language.
321 * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
322 Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
323 * language.h: Improve comment for la_builtin_type_vector.
324 * m2-lang.c (_initialize_m2_language): Don't add any fields to
325 builtin_type_m2_bool.
326
327 Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
328
329 * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
330 Define IN_SIGTRAMP and backtrace correctly through signal handlers.
331
332 Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
333
334 * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
335 by restarting the ioctl.
336
337 Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
338
339 * target.h (target_wait): Add comment about calling
340 return_to_top_level.
341
342 Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
343
344 * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
345 additional arguments.
346 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
347
348 Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
349
350 * sparc-stub.c: Remove unnecessary #include of memory.h.
351
352 Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
353
354 * mips-tdep.c: Remove code which sets saved_regs from
355 init_extra_frame_info and put it in new function mips_find_saved_regs.
356 (READ_FRAME_REG): Remove macro and replace uses with the expansion.
357 * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
358 check if it is NULL and call mips_find_saved_regs if so.
359
360 * remote-mips.c: Use unfiltered, not filtered, output most places.
361
362 * blockframe.c (get_prev_frame_info): Detect and stop an infinite
363 backtrace. Revise comments.
364
365 Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
366
367 * mdebugread.c (parse_procedure): Remove _sigtramp kludges for
368 alpha and irix. The _sigtramp case has to be handled properly
369 in the tdep files if we have no ecoff debugging info.
370 * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
371 mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
372 without PC_REGNUM kludge.
373 * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
374 Clean up handling of mips sigtramp frames, improve comments.
375
376 Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
377
378 * paread.c (read_unwind_info): Fix typo.
379
380 * paread.c (pa_symtab_read): Update the "check_strange_names"
381 filter to match GCC's current output. Filter out section symbols
382 (which the HP linker sometimes puts in the wrong place).
383
384 Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
385
386 * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
387
388 * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
389
390 * Makefile.in: Remove all references to sparcly-nat.c.
391
392 * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
393 remote-sim.h directly, rather than via $(remote_utils_h). This avoids
394 duplicating serial.h and target.h.
395
396 * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
397 are not used anywhere (a 5 Oct 1993 change removed the uses).
398
399 * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
400 * config/m68k/es1800.mt: Add comment.
401 * remote-es.c: Extensive changes to update to current conventions.
402
403 * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
404 If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
405 to achieve the desired timeout.
406 * serial.h (serial_t): Add field timeout_remaining.
407
408 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
409
410 * c-exp.y (yylex): Reenable nested type code.
411
412 Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
413
414 * a29k-tdep.c (examine_tag): Add comment regarding argcount.
415
416 * remote-mips.c (mips_ops): Fix docstring.
417
418 * remote-bug.c (bug_ops): Remove spurious newline from docstring.
419
420 * config/m68k/tm-monitor.h: Changes to bring this into accordance
421 with the old tm-m68k-em.h:
422 (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
423 (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
424 (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
425 Add FIXME regarding GET_LONGJMP_TARGET.
426
427 * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
428 * infptrace.c (kill_inferior): Add comments.
429 * main.c (quit_command): Call target_close after we kill or
430 detach.
431 * remote-udi.c (udi_close): Don't error() if QUITTING.
432
433 Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
434
435 * configure.in: Make m68k-coff and aout add monitor support in
436 addition to the standard serial support.
437
438 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
439
440 * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
441 index indexNil.
442
443 Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
444
445 * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
446 * elfread.c (record_minimal_symbol_and_info),
447 dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
448
449 Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
450
451 * i386-stub.c: Add ".text" right before "mem_fault:".
452
453 * main.c (baud_rate): Add FIXME comment about printing -1 value.
454
455 * remote-utils.c (usage): Fix message to be accurate and conform
456 more closely to normal conventions.
457
458 * remote-utils.c (gr_files_info): Have the exec_bfd test control
459 whether to show information about exec_bfd, and not control whether
460 to show information about device and speed.
461
462 * remote-utils.c (gr_open): If sr_get_device returns NULL, give
463 usage message, don't dump core.
464
465 * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
466 for variable size array.
467 (bug_fetch_register, bug_store_register): Rename "value" to
468 "fpreg_buf" because some compilers don't like variables whose
469 names are the same as types.
470 (bug_store_register): Use a cast when converting char * to
471 unsigned char *.
472
473 * symmisc.c (maintenance_print_symbols): Don't refer to the name
474 of the command in error message (the text was referring to the old
475 name of the command).
476
477 * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
478
479 * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
480 full details on structure elements without names. This partially
481 reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
482 of those changes was accidental.
483
484 * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
485 defined, make it an error to specify a single argument which is not
486 a frame number.
487
488 * Makefile.in (version.c), main.c (print_gdb_version): Use
489 host_alias and target_alias, not host_canonical and
490 target_canonical, to print configuration.
491
492 Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
493
494 * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
495 of builtin_type_long. It is necessary to get a type which is
496 TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
497
498 Fix many sins which will come up in 32 bit x 64 bit GDB, and
499 various miscellaneous things discovered in the process:
500 * printcmd.c, defs.h (print_address_numeric): New function.
501 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
502 breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
503 cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
504 printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
505 Use it.
506 * utils.c, defs.h (gdb_print_address): New function.
507 * expprint (dump_expression), gdbtypes.h: Use it.
508 * breakpoint.c (describe_other_breakpoints),
509 symmisc.c (dump_symtab, print_symbol):
510 Use filtered not unfiltered I/O.
511 (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
512 just run gdb under a debugger for this (and it had problems with
513 printing addresses, how to print b->shadow, etc.).
514 * buildsym.c (make_blockvector), core.c (memory_error),
515 exec.c (print_section_info), maint.c (print_section_table),
516 mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
517 symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
518 Add comments saying code is broken. Marked with "FIXME-32x64".
519 * dbxread.c (process_one_symbol), partial-stab.h (default),
520 remote-vx.c (vx_run_files_info):
521 Don't cast int being passed to local_hex_string.
522 * symmisc.c (print_symbol): Don't cast long being passed to %lx.
523 * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
524 only being a long.
525 * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
526 and LOC_LOCAL.
527 * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
528 * source.c: Include <sys/types.h> regardless of USG.
529
530 Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
531
532 * valops.c (value_assign): Set `type' after coercing toval.
533 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
534 Use extract_unsigned_integer to get the address of a reference.
535
536 Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
537
538 * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
539 AIX can use ? instead of \ for continuation. Deal with it.
540
541 * paread.c (read_unwind_info): Just assign to objfile->obj_private,
542 not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
543 the HP compiler in ANSI mode doesn't like.
544
545 * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
546 based on USG, rather than defining HAVE_SIGSETMASK to an
547 expression containing defined. Having a macro used in #if expand
548 to an expression containing "defined" is undefined according to
549 ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
550 it to.
551
552 Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
553
554 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
555 Clean up the changes of 11 Jan, as recommended by Peter Schauer.
556
557 Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
558
559 * ch-exp.y (match_string_literal): Allow a zero-length string.
560 * ch-lang.c (chill_printstr): Don't print zero-length string funny.
561
562 Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
563
564 * i386aix-nat.c (i386_float_info): Reverse order of registers before
565 passing them to print_387_status.
566 (print_387_status): Don't subtract top from 7 before using it.
567 * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
568 from 7; the above explains it.
569
570 Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
571
572 * mips-tdep.c (init_extra_frame_info): Use frame relative stack
573 pointer value when fixing up the frame at the start of a function.
574
575 Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
576
577 * lynx-nat.c (fetch_core_registers): Load the I & L regs for the
578 Sparc from the stack.
579
580 Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
581
582 * remote-mips.c (mips_initialize): Clear mips_initializing via
583 cleanup chain, not directly.
584
585 * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
586 of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are
587 munging the timeout due to the limited range of c_cc[VTIME].
588
589 * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
590 * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
591 m3-nat.c (m3_create_inferior): Pass it.
592 * procfs.c: Remove ptrace function. It was declared in a way which
593 conflicted with the prototype in unistd.h on Solaris.
594
595 Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
596
597 * sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc
598 in the sigcontext if it is a signal trampoline frame.
599 * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
600 Define for Solaris2.
601
602 Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com)
603
604 * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
605 config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to
606 tm-sparc.h so they can be overridden if necessary.
607
608 Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com)
609
610 * lynx-nat.c: Add Sparc support.
611 * sparcly-nat.c: Remove. It's useless.
612 * config/sparc/nm-sparclynx.h: Rewrite.
613 * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o
614 with lynx-nat.o
615 * config/sparc/tm-sparclynx.h: Rewrite.
616
617 Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
618
619 * rs6000-pinsn.c: Use the new disassembler in the opcodes
620 directory. Old code was discarded, since the new opcode table has
621 a different format.
622
623 Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com)
624
625 * Makefile.in (realclean): Remove info files per make-stds.texi.
626
627 Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
628
629 * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
630 if N_SO_ADDRESS_MAYBE_MISSING is defined.
631 * config/sparc/tm-sun4sol2.h: Define it.
632
633 Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
634
635 * printcmd.c (print_address_symbolic): Unconditionally use msymbol
636 if we did not find a symbol.
637
638 Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
639
640 * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
641 is not defined.
642
643 * hppab-nat.c (call_ptrace): Delete redundant function.
644 (kill_inferior, attach, detach, child_resume): Likewise.
645 (child_xfer_memory): Likewise.
646
647 * hppah-nat.c (call_ptrace): Delete redundant function.
648 (kill_inferior, attach, detach, child_resume): Likewise.
649
650 * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
651
652 * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
653
654 * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
655
656 * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
657 (CHILD_XFER_MEMORY): Define.
658 (PT_*): Define so that generic infptrace.c code can be used.
659
660 Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
661
662 * xcoffread.c (xcoff_symfile_read): Make second parameter a
663 struct section_offsets *, not a (nonexistent) struct section_offset *.
664
665 * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
666 internal_xcoff_symtab, not an array of one of them. Change lots of
667 "main_aux" to "&main_aux" and so on.
668
669 * coffread.c, xcoffread.c: Include <coff/internal.h>
670 before "symfile.h".
671
672 Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
673
674 * coffread.c (coff_getfilename): Make it not static.
675
676 * xcoffread.c (read_xcoff_symtab): complain() not abort().
677
678 * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
679 a completely gratuitous difference between xcoffread.c and coffread.c).
680
681 Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
682
683 * infrun.c (wait_for_inferior): Don't set frame for
684 step_resume_breakpoint for IN_SIGTRAMP cases.
685
686 * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
687 breakpoint.c (bpstat_what): Move step_resume from its own field of
688 the struct bpstat_what into the main_action. Make it override
689 other breakpoints. This is a conservative change in the sense
690 that before the step resume breakpoint was a breakpoint.c
691 breakpoint, hitting the step resume breakpoint overrode even
692 calling bpstat_stop_status.
693
694 Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
695
696 * infrun.c (normal_stop): Set stop_pc after popping the dummy frame
697 in case execution was stopped in the called function.
698 * stack.c (print_frame_info, frame_info): If backtracing through
699 a call dummy, handle the starting source line number on a line
700 boundary like backtracing through sigtramp.
701 * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
702 for call dummy frame right. Remove old test for dummy frame,
703 it has been unused at least since gdb-3.5.
704 * sparc-tdep.c (sparc_push_dummy_frame): Set return address register
705 of the dummy frame.
706
707 Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
708
709 * infcmd.c (signal_command): Accept 0 as legitimate signal number.
710
711 Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
712
713 * infrun.c (signals_info), target.c (target_signal_from_name):
714 Use ugly casts to avoid enumvar < enumvar or enumvar++.
715
716 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
717
718 * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
719 * inflow.c (terminal_ours_1): When discussing how to deal with the
720 tty state, make note of query() as well as readline.
721
722 * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
723 signals for which stop and print are cleared by default.
724
725 Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
726
727 * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
728 reserved fields to hold a stub unwind entry type. Fix typo.
729 (stub_unwind_entry): New structure for raw stub unwind entries.
730 (stub_unwind_types): The types of stubs we may encounter.
731 (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
732 * hppa-tdep.c (rp_saved): Use additional information provided
733 by linker stub unwind descriptors.
734 (frameless_function_invocation): Likewise.
735 (frame_chain_valid): Likewise.
736 * paread.c (compare_unwind_entries): New function for sorting
737 unwind table entries.
738 (read_unwind_info): Rewrite to remove dependency on host endianness.
739 Read in data from the $UNWIND_END$ subspace which contains linker
740 stub unwind descriptors. Merge that data into the basic unwind
741 table.
742
743 * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
744
745 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
746
747 * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
748 from either the symbol name or the auxent.
749 * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
750 no longer static.
751
752 Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com)
753
754 * Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h.
755
756 Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
757
758 * README: Update notes for alpha port.
759
760 Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
761
762 * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
763 for operation fault, constraint fault, and type fault.
764
765 Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
766
767 * Makefile.in (init.c): Add comment explaining formatting conventions.
768
769 * c-exp.y (parse_number): Assign to temporary between the right
770 shifts, to work around a bug in the SCO compiler.
771
772 * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
773 Add various files which were added to GDB recently.
774
775 * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
776 within_function.
777
778 * Makefile.in: Add mostlyclean target.
779
780 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
781
782 * Version 4.11.4.
783
784 Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com)
785
786 * main.c (show_commands): Make return type of extern
787 history_get be HIST_ENTRY, rather than struct _hist_entry.
788 (The latter loses with the upcoming merged readline.)
789
790 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
791
792 * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
793 const char *, not char *.
794
795 * symtab.h (struct symbol): Make section short, not unsigned short.
796
797 * symtab.c (lookup_symbol): Add comment about QUIT here.
798
799 * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
800
801 * c-exp.y (parse_number): Check for overflow regardless of range
802 checking. Fix overflow check to use unsigned LONGEST, not
803 unsigned int.
804
805 * c-exp.y (parse_number): Make it so that integer constants are
806 builtin_type_long_long if builtin_type_long isn't big enough or if
807 an "LL" suffix is used. Properly handle "UL" or "LU" suffixes.
808
809 * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
810 Print our "()" first, then recurse for the target type.
811
812 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
813
814 * remote-udi.c (udi_create_inferior): Quote empty execfile argument.
815
816 * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
817
818 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
819
820 * utils.c (request_quit): Re-establish signal handler regardless
821 of USG.
822
823 * config/mips/xm-irix4.h: Define HAVE_TERMIOS.
824
825 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
826
827 * i960-tdep.c: Include target.h.
828
829 Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com)
830
831 * lynx-nat.c (sys/wait.h): Don't use absolute pathname.
832
833 Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
834
835 * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
836 changes (status -> ourstatus; declare status, etc.).
837 * config/nm-lynx.h: Fix child_wait prototype and include target.h.
838
839 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
840
841 * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
842
843 Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
844
845 * remote-mips.c (mips_request, mips_wait): Correct prototypes.
846
847 Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
848
849 * config/i386/xm-linux.h: Define HAVE_TERMIOS.
850
851 Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
852
853 * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
854
855 Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
856
857 * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
858 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
859
860 * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
861 writing it.
862
863 Add search to target vector (#if 0'd until after 4.12):
864 * target.h (to_search, target_search): Add.
865 * gdbcore.h, core.c (generic_search): Add.
866 * remote.c (remote_search): Add.
867 * a29k-tdep.c (init_frame_info): Use target_search to find traceback
868 tag.
869
870 * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
871 is on, call find_pc_function rather than relying just on the minimal
872 symbols (probably only matters for symbol readers which don't put
873 statics in the minimal symbols, but changing this strikes me as
874 not conservative enough).
875 Initialize name_location in all cases.
876 If no symbol and no msymbol, don't print anything symbolic.
877
878 * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
879
880 Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
881
882 * printcmd.c (print_address_symbolic): Make it search the
883 symtabs for variables as well as functions. Add `set print
884 fast-symbolic-addr' and default it to fast (the old way).
885 Print line numbers for data items as well as functions.
886
887 * symtab.c (find_addr_symbol): Return the symtab and the symbol
888 address, if a symbol is found (take two more args pointing to
889 where to store these results).
890
891 * symtab.h (find_addr_symbol): Add prototype.
892
893 Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
894
895 * objfiles.h: Fix comments to reflect the fact that the phrase
896 "top of stack" always refers to where the pushing and popping takes
897 place, regardless of whether it is at the highest or lowest address.
898
899 Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
900
901 * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
902 compiler generated tag names.
903 * mdebugread.c (parse_type): Handle cross references to qualified
904 aggregate types.
905 * valops.c (value_struct_elt): Improve error message if the
906 address of a method is requested from an object instance.
907 * valops.c (search_struct_method): Make name_matched non-static
908 to get it initialized correctly.
909 * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
910 exclude segment register which are not writable on newer SCO versions.
911
912 Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
913
914 * go32-xdep.c: Remove unused function uerror.
915 (sigsetmask): Declare return type. Declare argument (to match the
916 way it is called). Explicitly return 0.
917
918 Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
919
920 * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
921 partial_symbol): Shrink the storage sizes of symbols, by making
922 enums into 1-byte bitfields when compiled __GNUC__, moving all the
923 enums and small ints to the end of each struct to improve
924 alignment, and switching the section number from int to unsigned
925 short.
926
927 Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
928
929 * symtab.c (find_addr_symbol): New routine that will find the nearest
930 symbol associated with an address. It does so by exhaustive
931 search of the symtabs, so it's slow but complete.
932
933 Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
934
935 * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
936 to [0,0] rather than [0, end of first source file]. This avoids
937 problems with other parts of GDB looking for linetables in the
938 _globals_ symtab. Eliminate variables num_object_files and
939 first_object_file_end.
940
941 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
942
943 * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
944 (pop_frame): Restore PC2 and LR0 from dummy frames.
945 (push_dummy_frame): Save PC2 and LR0 into dummy frames.
946 (setup_arbitrary_frame): Handle 3 args and set up real frames.
947 * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
948 (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
949 (SETUP_ARBITRARY_FRAME): Define.
950
951 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
952
953 * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
954
955 Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
956
957 * remote-udi.c (udi_resume): Correct prototype.
958
959 Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
960
961 * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
962 hppa_frame_find_saved_regs.
963 * hppa-tdep.c (dig_fp_from_stack): Delete function.
964 (prologue_inst_adjust_sp): New function.
965 (is_branch, inst_saves_gr, inst_saves_fr): New functions.
966 (skip_prologue): Completely rewrite to use unwind information.
967 (hppa_frame_find_saved_regs): Likewise.
968
969 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
970
971 * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
972 to convert a signal number with appropriate bounds checking.
973
974 * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
975
976 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
977
978 * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
979 print a newline to end the display anyway.
980
981 * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
982 coprocessor status regs) when popping a frame. This fixes
983 float exceptions that occur after calling inferior functions.
984
985 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
986 Read and write the fsr (float status register) to/from the child
987 process along with the float regs. Remove Peter Schauer's change
988 of May 24 '93, which has higher overhead and doesn't solve the
989 real problem (which was that FSR wasn't being set).
990
991 Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
992
993 * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
994 stack overflow check isn't right after the register stack
995 adjustment instruction. Metaware R2.3u compiler moves other
996 things in front of it. This fix isn't perfect but is what's
997 running.
998
999 Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1000
1001 * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
1002
1003 * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
1004 character filenames.
1005 * configure.in: Change accordingly.
1006
1007 Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
1008
1009 * m68k-stub.c, sparc-stub.c: removed spurious introduction of
1010 _filtered io routines from these two files.
1011
1012 Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1013
1014 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
1015 config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
1016 * mdebugread.c (parse_symbol): Handle enum sh.type produced by
1017 DEC c89.
1018 * mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
1019
1020 Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1021
1022 * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
1023 printing to gdb_stderr.
1024
1025 * remote-udi.c (udi_kill): Don't close the connection, just set
1026 inferior_pid to zero.
1027 (udi_mourn): Call remove_breakpoints.
1028
1029 * remote-udi.c: Remove obsolete need_artificial_traps comment.
1030
1031 * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
1032
1033 Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1034
1035 * symtab.c (lookup_symbol): Don't try adding .c to the name.
1036
1037 * remote-bug.c: At the start of each section, reset srec_frame
1038 back to 160.
1039
1040 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
1041 * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
1042 * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
1043 code which looks for those two waitkinds. Use switch statement.
1044 * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
1045 CHILD_SPECIAL_WAITSTATUS.
1046
1047 * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
1048 * Move target_signal_from_host, target_signal_to_host, and
1049 store_waitstatus from inftarg.c to target.c. procfs needs them.
1050 * target.c: Include "wait.h" and <signal.h>.
1051 * target.h, infrun.c (proceed), proceed callers: Pass new code
1052 TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
1053 enums being treated as unsigned and is cleaner.
1054 * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
1055 TARGET_SIGNAL_0.
1056 * infcmd.c (signal_command), infrun.c (signals_info):
1057 Don't allow user to specify numeric equivalent of
1058 TARGET_SIGNAL_DEFAULT.
1059
1060 Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
1061
1062 * config/alpha/alpha-netware.mt: New target support for Alpha
1063 running Netware.
1064 * configure.in: Add alpha-*-netware* target.
1065
1066 Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
1067
1068 * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
1069
1070 Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1071
1072 * target.h: Add enum target_waitkind, enum target_signal, and
1073 struct target_waitstatus. Change status argument to target_wait to
1074 be struct target_waitstatus * instead of int *.
1075 * target.h, infrun.c, all targets: Change type of signal arguments
1076 to resume(), proceed(), and target_resume() from int to enum
1077 target_signal.
1078 * All targets (*_wait, *_resume): Change accordingly.
1079 * infcmd.c (program_info, signal_command), throughout infrun.c,
1080 * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
1081 * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
1082 signal code stuff right with the new signals would be non-trivial).
1083 * inferior.h (stop_signal): Make it enum target_signal not int.
1084 * target.c, target.h (target_signal_to_string, target_signal_to_name,
1085 target_signal_from_name): New functions.
1086 * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
1087 store_waitstatus): New functions.
1088 * procfs.c (procfs_notice_signals): Use them.
1089 * i960-tdep.c (i960_fault_to_signal): New function, to replace
1090 print_fault.
1091 * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
1092
1093 * objfiles.c (build_objfile_section_table): Don't abort() if
1094 objfile->sections is already set.
1095
1096 * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
1097 to match recent change to exec.c.
1098
1099 * Version 4.11.3.
1100
1101 * main.c (print_gdb_version): Change year to 1994.
1102
1103 * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
1104 * Makefile.in (NONSRC): Add ChangeLog-93.
1105
1106 Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1107
1108 * stabsread.c (read_type): Allow defining several type numbers
1109 at once (e.g. "(1,2)=(3,4)="...).
1110
1111 * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
1112
1113 * breakpoint.c (frame_in_dummy): Check PC as well as frame.
1114
1115 Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1116
1117 * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
1118 to process_one_symbol.
1119 * symtab.c (find_pc_psymbol): Search global_psymbols as well to
1120 avoid caching a bad endaddr in find_pc_partial_function.
1121
1122 Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1123
1124 * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
1125
1126 Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1127
1128 * infrun.c (wait_for_inferior): Do not step or step resume past
1129 the end of a one-line function we just stepped into.
1130
1131 For older changes see ChangeLog-93
1132 \f
1133 Local Variables:
1134 mode: indented-text
1135 left-margin: 8
1136 fill-column: 74
1137 version-control: never
1138 End:
This page took 0.053066 seconds and 5 git commands to generate.