1 2014-02-12 Mark Kettenis <kettenis@gnu.org>
3 * obsd-tdep.h (obsd_init_abi): New prototype.
4 * obsd-tdep.c: Define enum with OpenBSD signal numbers.
5 (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
6 (obsd_init_abi): New functions.
7 * i386obsd-tdep.c: Include "obsd-tdep.h".
8 (i386obsd_init_abi): Call obsd_init_abi.
9 * amd64obsd-tdep.c: Include "obsd-tdep.h".
10 (amd64obsd_init_abi): Call obsd_init_abi.
11 * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
12 obsd-tdep.c to gdb_target_obs.
14 2014-02-11 Jose E. Marchesi <jose.marchesi@oracle.com>
16 * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
17 double float arguments to 16-byte in the argument slots.
19 2014-02-11 Doug Evans <xdje42@gmail.com>
21 * configure.ac: Don't crash if pkg-config is not found and guile
22 wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
24 * configure: Regenerate.
26 2014-02-11 Yao Qi <yao@codesourcery.com>
28 * aix-thread.c (aix_thread_xfer_partial): Update comments.
29 * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
30 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
31 * gnu-nat.c (gnu_xfer_memory): Likewise.
32 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
33 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
34 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
35 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
37 2014-02-11 Yao Qi <yao@codesourcery.com>
39 * target.h (enum target_xfer_error): Rename to ...
40 (enum target_xfer_status): ... it. New. All users updated.
41 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
43 (TARGET_XFER_STATUS_ERROR_P): New macro.
44 (target_xfer_error_to_string): Remove declaration.
45 (target_xfer_status_to_string): Declare.
46 (target_xfer_partial_ftype): Adjust it.
47 (struct target_ops) <to_xfer_partial>: Return
48 target_xfer_status. Add argument xfered_len. Update
50 * target.c (target_xfer_error_to_string): Rename to ...
51 (target_xfer_status_to_string): ... it. New. All callers
53 (target_read_live_memory): Likewise. Call target_xfer_partial
54 instead of target_read.
55 (memory_xfer_live_readonly_partial): Return
56 target_xfer_status. Add argument xfered_len.
57 (raw_memory_xfer_partial): Likewise.
58 (memory_xfer_partial_1): Likewise.
59 (memory_xfer_partial): Likewise.
60 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
61 properly. Update debug message.
62 (default_xfer_partial, current_xfer_partial): Likewise.
63 (target_write_partial): Likewise.
64 (target_read_partial): Likewise. All callers updated.
65 (read_whatever_is_readable): Likewise.
66 (target_write_with_progress): Likewise.
67 (target_read_alloc_1): Likewise.
69 * aix-thread.c (aix_thread_xfer_partial): Likewise.
70 * auxv.c (procfs_xfer_auxv): Likewise.
71 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
72 * bfd-target.c (target_bfd_xfer_partial): Likewise.
73 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
74 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
75 * corefile.c (read_memory): Adjust.
76 * corelow.c (core_xfer_partial): Likewise.
77 * ctf.c (ctf_xfer_partial): Likewise.
78 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
80 (darwin_xfer_partial): Likewise.
81 * exec.c (section_table_xfer_memory_partial): Likewise. All
83 (exec_xfer_partial): Likewise.
84 * exec.h (section_table_xfer_memory_partial): Update
86 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
88 (gnu_xfer_partial): Likewise.
89 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
90 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
91 (ia64_hpux_xfer_solib_got): Likewise.
92 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
93 type of 'partial_len' to ULONGEST.
94 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
95 * linux-nat.c (linux_xfer_siginfo ): Likewise.
96 (linux_nat_xfer_partial): Likewise.
97 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
98 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
99 * monitor.c (monitor_xfer_memory): Likewise.
100 (monitor_xfer_partial): Likewise.
101 * procfs.c (procfs_xfer_partial): Likewise.
102 * record-btrace.c (record_btrace_xfer_partial): Likewise.
103 * record-full.c (record_full_xfer_partial): Likewise.
104 (record_full_core_xfer_partial): Likewise.
105 * remote-sim.c (gdbsim_xfer_memory): Likewise.
106 (gdbsim_xfer_partial): Likewise.
107 * remote.c (remote_write_bytes_aux): Likewise. All callers
109 (remote_write_bytes, remote_read_bytes): Likewise. All
111 (remote_flash_erase): Likewise. All callers updated.
112 (remote_write_qxfer): Likewise. All callers updated.
113 (remote_read_qxfer): Likewise. All callers updated.
114 (remote_xfer_partial): Likewise.
115 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
116 (rs6000_xfer_shared_libraries): Likewise.
117 * sol-thread.c (sol_thread_xfer_partial): Likewise.
118 (sol_thread_xfer_partial): Likewise.
119 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
120 (sparc_xfer_partial): Likewise.
121 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
123 (spu_xfer_partial): Likewise.
124 * spu-multiarch.c (spu_xfer_partial): Likewise.
125 * tracepoint.c (tfile_xfer_partial): Likewise.
126 * windows-nat.c (windows_xfer_memory): Likewise.
127 (windows_xfer_shared_libraries): Likewise.
128 (windows_xfer_partial): Likewise.
129 * valprint.c: Replace 'target_xfer_error' with
130 'target_xfer_status' in comments.
132 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
134 Checked in by Joel Brobecker <brobecker@adacore.com>.
135 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
137 2014-02-11 Joel Brobecker <brobecker@adacore.com>
139 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
142 2014-02-10 Will Newton <will.newton@linaro.org>
144 * elfread.c (elf_rel_plt_read): Look for a .got section if
145 looking up .got.plt fails.
146 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
147 on address passed to elf_gnu_ifunc_record_cache.
148 (elf_gnu_ifunc_resolve_addr): Likewise.
149 (elf_gnu_ifunc_resolver_return_stop): Likewise.
151 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
153 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
154 (X_RETTURN): New macro.
155 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
157 * sparc64-tdep.c (sparc64_init_abi): Hook
158 sparc_in_function_epilogue_p.
160 2014-02-10 Gary Benson <gbenson@redhat.com>
162 * symfile-debug.c (debug_qf_expand_symtabs_matching):
163 Rename name_matcher to symbol_matcher.
165 2014-02-10 Gary Benson <gbenson@redhat.com>
167 * symfile-debug.c (debug_qf_expand_symtabs_matching):
168 Use expand_symtabs_file_matcher_ftype and
169 expand_symtabs_symbol_matcher_ftype.
171 2014-02-10 Joel Brobecker <brobecker@adacore.com>
173 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
174 (struct ada_symbol_cache): New.
175 (ada_free_symbol_cache): Forward declare.
176 (struct ada_pspace_data): New.
177 (ada_pspace_data_handle): New static global.
178 (get_ada_pspace_data, ada_pspace_data_cleanup)
179 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
180 (cache_space, cache): Delete, now folded inside struct
182 (ada_get_symbol_cache): New function.
183 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
185 (_initialize_ada_language): Remove initialization of cache_space.
186 Move call to observer_attach_inferior_exit up, grouping it
187 with the other observer registrations inside this function.
188 Rename command to be more general. Add call to
189 register_program_space_data_with_cleanup.
191 2014-02-10 Joel Brobecker <brobecker@adacore.com>
193 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
194 ada_new_objfile_observer.
195 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
196 (_initialize_tasks): Update uses of ada_new_objfile_observer
197 and ada_tasks_normal_stop_observer.
199 2014-02-10 Joel Brobecker <brobecker@adacore.com>
201 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
202 returned by the 'Length attribute to integer.
204 2014-02-10 Joel Brobecker <brobecker@adacore.com>
206 * ada-lang.c (_initialize_ada_language): Initialize
209 2014-02-10 Joel Brobecker <brobecker@adacore.com>
211 * ada-lang.c (HASH_SIZE): New macro.
212 (struct cache_entry): New type.
213 (cache_space, cache): New static globals.
214 (ada_clear_symbol_cache, find_entry): New functions.
215 (lookup_cached_symbol, cache_symbol): Implement.
216 (ada_new_objfile_observer, ada_free_objfile_observer): New.
217 (_initialize_ada_language): Attach ada_new_objfile_observer
218 and ada_free_objfile_observer.
220 2014-02-10 Joel Brobecker <brobecker@adacore.com>
222 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
223 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
224 struct block * parameter.
225 (ada_lookup_symbol_list_worker): Constify local variable "block".
226 Remove cast which is no longer necessary.
228 2014-02-10 Doug Evans <xdje42@gmail.com>
230 Add Guile as an extension language.
231 * NEWS: Mention Guile scripting.
232 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
233 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
234 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
235 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
236 (CLIBS): Add GUILE_LIBS.
237 (install-guile): New rule.
239 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
240 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
241 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
242 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
243 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
244 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
245 (scm-type.o, scm-utils.o, scm-value.o): New rules.
246 * configure.ac: New option --with-guile.
247 * configure: Regenerate.
248 * config.in: Regenerate.
249 * auto-load.c: Remove #include "python/python.h". Add #include
250 "gdb/section-scripts.h".
251 (source_section_scripts): Handle Guile scripts.
252 (_initialize_auto_load): Add name of Guile objfile script to
253 scripts-directory help text.
254 * breakpoint.c (condition_command): Tweak comment to include Scheme.
255 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
256 (struct breakpoint): New member scm_bp_object.
257 * defs.h (enum command_control_type): New value guile_control.
258 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
260 (show_user): Update comment.
261 (_initialize_cli_cmds): Update help text for "show user". Update help
262 text for max-user-call-depth.
263 * cli/cli-script.c: Remove #include "python/python.h". Add #include
265 (multi_line_command_p): Add guile_control.
266 (print_command_lines): Handle guile_control.
267 (execute_control_command, recurse_read_control_structure): Ditto.
268 (process_next_line): Recognize "guile" commands.
269 * disasm.c (gdb_disassemble_info): Make non-static.
270 * disasm.h: #include "dis-asm.h".
271 (struct gdbarch): Add forward decl.
272 (gdb_disassemble_info): Declare.
273 * extension.c: #include "guile/guile.h".
274 (extension_languages): Add guile.
275 (get_ext_lang_defn): Handle EXT_LANG_GDB.
276 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
277 * gdbtypes.c (get_unsigned_type_max): New function.
278 (get_signed_type_minmax): New function.
279 * gdbtypes.h (get_unsigned_type_max): Declare.
280 (get_signed_type_minmax): Declare.
281 * guile/README: New file.
282 * guile/guile-internal.h: New file.
283 * guile/guile.c: New file.
284 * guile/guile.h: New file.
285 * guile/scm-arch.c: New file.
286 * guile/scm-auto-load.c: New file.
287 * guile/scm-block.c: New file.
288 * guile/scm-breakpoint.c: New file.
289 * guile/scm-disasm.c: New file.
290 * guile/scm-exception.c: New file.
291 * guile/scm-frame.c: New file.
292 * guile/scm-gsmob.c: New file.
293 * guile/scm-iterator.c: New file.
294 * guile/scm-lazy-string.c: New file.
295 * guile/scm-math.c: New file.
296 * guile/scm-objfile.c: New file.
297 * guile/scm-ports.c: New file.
298 * guile/scm-pretty-print.c: New file.
299 * guile/scm-safe-call.c: New file.
300 * guile/scm-string.c: New file.
301 * guile/scm-symbol.c: New file.
302 * guile/scm-symtab.c: New file.
303 * guile/scm-type.c: New file.
304 * guile/scm-utils.c: New file.
305 * guile/scm-value.c: New file.
306 * guile/lib/gdb.scm: New file.
307 * guile/lib/gdb/boot.scm: New file.
308 * guile/lib/gdb/experimental.scm: New file.
309 * guile/lib/gdb/init.scm: New file.
310 * guile/lib/gdb/iterator.scm: New file.
311 * guile/lib/gdb/printing.scm: New file.
312 * guile/lib/gdb/types.scm: New file.
313 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
314 (VPATH): Add $(GUILE_SRCDIR).
315 (GUILE_DIR): New variable.
316 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
317 (all): Add stamp-guile dependency.
318 (stamp-guile): New rule.
319 (clean-guile, install-guile, uninstall-guile): New rules.
320 (install-only): Add install-guile dependency.
321 (uninstall): Add uninstall-guile dependency.
322 (clean): Add clean-guile dependency.
324 2014-02-09 Doug Evans <xdje42@gmail.com>
326 Revert this patch (which I approved, mea culpa).
328 2014-02-08 Mark Kettenis <kettenis@gnu.org>
330 * Makefile.in (all-lib): Remove.
331 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
333 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
335 Fix Python stack corruption.
336 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
339 2014-02-08 Mark Kettenis <kettenis@gnu.org>
341 * Makefile.in (all-lib): Remove.
342 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
344 2014-02-07 Doug Evans <dje@google.com>
346 * extension-priv.h (extension_language_script_ops): Add comment.
347 (extension_language_ops): Add comment.
348 (active_ext_lang_state): Fix typo in comment.
350 2014-02-07 Pedro Alves <palves@redhat.com>
352 * infrun.c (handle_signal_stop) <signal arrives while stepping
353 over a breakpoint>: Switch back to the stepping thread.
355 2014-02-07 Yao Qi <yao@codesourcery.com>
357 * target.c (target_xfer_partial): Return zero if LEN is zero.
359 2014-02-07 Yao Qi <yao@codesourcery.com>
361 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
362 (ld_so_xfer_auxv): Likewise.
363 * bfd-target.c (target_bfd_xfer_partial): Likewise.
364 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
365 * corelow.c (core_xfer_partial): Likewise.
366 * ctf.c (ctf_xfer_partial): Likewise.
367 * darwin-nat.c (darwin_read_dyld_info): Likewise.
368 (darwin_xfer_partial): Likewise.
369 * exec.c (exec_xfer_partial): Likewise.
370 * gnu-nat.c (gnu_xfer_partial): Likewise.
371 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
372 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
373 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
374 * linux-nat.c (linux_xfer_siginfo): Likewise.
375 (linux_proc_xfer_spu): Likewise.
376 * procfs.c (procfs_xfer_partial): Likewise.
377 * record-full.c (record_full_xfer_partial): Likewise.
378 (record_full_core_xfer_partial): Likewise.
379 * remote-sim.c (gdbsim_xfer_partial): Likewise.
380 * remote.c (remote_write_qxfer): Likewise.
381 (remote_write_qxfer, remote_read_qxfer): Likewise.
382 (remote_xfer_partial): Likewise.
383 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
384 (rs6000_xfer_shared_libraries): Likewise.
385 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
386 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
387 (spu_xfer_partial): Likewise.
388 * target.c (memory_xfer_partial_1): Likewise.
389 * tracepoint.c (tfile_xfer_partial): Likewise.
390 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
391 (windows_xfer_partial): Likewise.
393 2014-02-07 Yao Qi <yao@codesourcery.com>
395 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
397 (core_xfer_shared_libraries_aix): Likewise.
398 * gdbarch.c, gdbarch.h: Regenerated.
399 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
400 ULONGEST. Change 'len_avail' type to ULONGEST.
401 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
402 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
404 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
406 2014-02-07 Yao Qi <yao@codesourcery.com>
408 * corefile.c (memory_error): Get 'exception' from ERR and pass
409 'exception' to throw_error.
411 2014-02-06 Doug Evans <xdje42@gmail.com>
413 * configure.ac (libpython checking): Remove all but python.o from
414 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
415 * configure: Regenerate.
417 * Makefile.in (SFILES): Add extension.c.
418 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
419 (COMMON_OBS): Add extension.o.
420 * extension.h: New file.
421 * extension-priv.h: New file.
422 * extension.c: New file.
424 * python/python-internal.h: #include "extension.h".
425 (gdbpy_auto_load_enabled): Declare.
426 (gdbpy_apply_val_pretty_printer): Declare.
427 (gdbpy_apply_frame_filter): Declare.
428 (gdbpy_preserve_values): Declare.
429 (gdbpy_breakpoint_cond_says_stop): Declare.
430 (gdbpy_breakpoint_has_cond): Declare.
431 (void source_python_script_for_objfile): Delete.
432 * python/python.c: #include "extension-priv.h".
433 Delete inclusion of "observer.h".
434 (extension_language_python): Moved here and renamed from
435 script_language_python in py-auto-load.c.
436 Redefined to be of type extension_language_defn.
437 (python_extension_script_ops): New global.
438 (python_extension_ops): New global.
439 (struct python_env): New member previous_active.
440 (restore_python_env): Call restore_active_ext_lang.
441 (ensure_python_env): Call set_active_ext_lang.
442 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
444 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
446 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
448 (gdbpy_eval_from_control_command): Renamed from
449 eval_python_from_control_command, made static. New arg extlang.
450 (gdbpy_source_script) Renamed from source_python_script, made static.
452 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
453 result to int. New arg extlang.
454 (gdbpy_source_objfile_script): Renamed from
455 source_python_script_for_objfile, made static. New arg extlang.
456 (gdbpy_start_type_printers): Renamed from start_type_printers, made
457 static. New args extlang, extlang_printers. Change result type to
459 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
460 static. New arg extlang. Rename arg printers to extlang_printers
461 and change type to ext_lang_type_printers *.
462 (gdbpy_free_type_printers): Renamed from free_type_printers, made
463 static. Replace argument arg with extlang, extlang_printers.
464 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
465 (!HAVE_PYTHON, source_python_script): Delete.
466 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
467 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
468 (!HAVE_PYTHON, start_type_printers): Delete.
469 (!HAVE_PYTHON, apply_type_printers): Delete.
470 (!HAVE_PYTHON, free_type_printers): Delete.
471 (_initialize_python): Delete call to observer_attach_before_prompt.
472 (finalize_python): Set/restore active extension language.
473 (gdbpy_finish_initialization) Renamed from
474 finish_python_initialization, made static. New arg extlang.
475 (gdbpy_initialized): New function.
476 * python/python.h: #include "extension.h". Delete #include
477 "value.h", "mi/mi-cmds.h".
478 (extension_language_python): Declare.
479 (GDBPY_AUTO_FILE_NAME): Delete.
480 (enum py_bt_status): Moved to extension.h and renamed to
482 (enum frame_filter_flags): Moved to extension.h.
483 (enum py_frame_args): Moved to extension.h and renamed to
485 (finish_python_initialization): Delete.
486 (eval_python_from_control_command): Delete.
487 (source_python_script): Delete.
488 (apply_val_pretty_printer): Delete.
489 (apply_frame_filter): Delete.
490 (preserve_python_values): Delete.
491 (gdbpy_script_language_defn): Delete.
492 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
493 (start_type_printers, apply_type_printers, free_type_printers): Delete.
495 * auto-load.c: #include "extension.h".
496 (GDB_AUTO_FILE_NAME): Delete.
497 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
498 (script_language_gdb): Delete, moved to extension.c and renamed to
499 extension_language_gdb.
500 (source_gdb_script_for_objfile): Delete.
501 (auto_load_pspace_info): New member unsupported_script_warning_printed.
502 (loaded_script): Change type of language member to
503 struct extension_language_defn *.
504 (init_loaded_scripts_info): Initialize
505 unsupported_script_warning_printed.
506 (maybe_add_script): Make static. Change type of language arg to
507 struct extension_language_defn *.
508 (clear_section_scripts): Reset unsupported_script_warning_printed.
509 (auto_load_objfile_script_1): Rewrite to use extension language API.
510 (auto_load_objfile_script): Make public. Remove support-compiled-in
511 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
512 (source_section_scripts): Rewrite to use extension language API.
513 (load_auto_scripts_for_objfile): Rewrite to use
514 auto_load_scripts_for_objfile.
515 (collect_matching_scripts_data): Change type of language member to
516 struct extension_language_defn *.
517 (auto_load_info_scripts): Change type of language arg to
518 struct extension_language_defn *.
519 (unsupported_script_warning_print): New function.
520 (script_not_found_warning_print): Make static.
521 (_initialize_auto_load): Rewrite construction of scripts-directory
523 * auto-load.h (struct objfile): Add forward decl.
524 (struct script_language): Delete.
525 (struct auto_load_pspace_info): Add forward decl.
526 (struct extension_language_defn): Add forward decl.
527 (maybe_add_script): Delete.
528 (auto_load_objfile_script): Declare.
529 (script_not_found_warning_print): Delete.
530 (auto_load_info_scripts): Update prototype.
531 (auto_load_gdb_scripts_enabled): Declare.
532 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
533 auto_load_python_scripts_enabled and made public.
534 (script_language_python): Delete, moved to python.c.
535 (gdbpy_script_language_defn): Delete.
536 (info_auto_load_python_scripts): Update to use
537 extension_language_python.
539 * breakpoint.c (condition_command): Replace call to
540 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
541 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
542 with call to breakpoint_ext_lang_cond_says_stop.
543 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
544 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
545 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
546 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
548 (local_setattro): Print name of extension language with existing
551 * valprint.c (val_print, value_print): Update to call
552 apply_ext_lang_val_pretty_printer.
553 * cp-valprint.c (cp_print_value): Update call to
554 apply_ext_lang_val_pretty_printer.
555 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
556 (gdbpy_apply_val_pretty_printer): Renamed from
557 apply_val_pretty_printer. New arg extlang.
558 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
560 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
561 extension language API.
562 * cli/cli-script.c (execute_control_command): Update to call
563 eval_ext_lang_from_control_command.
565 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
566 enum ext_lang_bt_status values. Update call to
567 apply_ext_lang_frame_filter.
568 (mi_cmd_stack_list_locals): Ditto.
569 (mi_cmd_stack_list_args): Ditto.
570 (mi_cmd_stack_list_variables): Ditto.
571 * mi/mi-main.c: Delete #include "python/python-internal.h".
572 Add #include "extension.h".
573 (mi_cmd_list_features): Replace reference to python internal variable
574 gdb_python_initialized with call to ext_lang_initialized_p.
576 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
577 Update to use enum ext_lang_frame_args. Update to call
578 apply_ext_lang_frame_filter.
579 * python/py-framefilter.c (extract_sym): Update to use enum
581 (extract_value, py_print_type, py_print_value): Ditto.
582 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
583 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
584 (py_print_frame): Ditto.
585 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
586 New arg extlang. Update to use enum ext_lang_bt_status.
588 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
589 finish_python_initialization. Replace with call to
590 finish_ext_lang_initialization.
592 * typeprint.c (do_free_global_table): Update to call
593 free_ext_lang_type_printers.
594 (create_global_typedef_table): Update to call
595 start_ext_lang_type_printers.
596 (find_global_typedef): Update to call apply_ext_lang_type_printers.
597 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
598 (type_print_options): Change type of global_printers from "void *"
599 to "struct ext_lang_type_printers *".
601 * value.c (preserve_values): Update to call preserve_ext_lang_values.
602 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
603 (gdbpy_preserve_values): Renamed from preserve_python_values.
605 (!HAVE_PYTHON, preserve_python_values): Delete.
607 * utils.c (quit_flag): Delete, moved to extension.c.
608 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
611 * eval.c: Delete #include "python/python.h".
612 * main.c: Delete #include "python/python.h".
614 * defs.h: Update comment.
616 2014-02-06 Joel Brobecker <brobecker@adacore.com>
620 2014-02-05 Mark Kettenis <kettenis@gnu.org>
622 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
625 2014-02-05 Yao Qi <yao@codesourcery.com>
627 * remote.c (remote_pass_signals): Remove local 'buf' and use
629 (remote_program_signals): Likewise.
631 2014-02-05 Yao Qi <yao@codesourcery.com>
633 * ctf.c: Include "inferior.h" and "gdbthread.h".
634 (CTF_PID): A new macro.
635 (ctf_open): Call inferior_appeared and add_thread_silent.
636 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
637 (ctf_thread_alive): New function.
638 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
640 2014-02-05 Yao Qi <yao@codesourcery.com>
644 2013-05-24 Yao Qi <yao@codesourcery.com>
646 * tracepoint.c (TFILE_PID): Remove.
647 (tfile_open): Don't add thread and inferior.
648 (tfile_close): Don't set 'inferior_ptid'. Don't call
649 exit_inferior_silent.
650 (tfile_thread_alive): Remove.
651 (init_tfile_ops): Don't set field 'to_thread_alive' of
654 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
656 * remote.c (remote_start_remote): Call remote_check_symbols even
657 if only symbol-file (not file) has been given.
659 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
661 * gdbarch.sh (skip_entrypoint): New callback.
662 * gdbarch.c, gdbarch.h: Regenerate.
663 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
664 * infrun.c (fill_in_stop_func): Likewise.
665 * ppc-linux-tdep.c: Include "elf/ppc64.h".
666 (ppc_elfv2_elf_make_msymbol_special): New function.
667 (ppc_elfv2_skip_entrypoint): Likewise.
668 (ppc_linux_init_abi): Install them for ELFv2.
670 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
672 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
673 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
674 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
675 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
676 structures returned in GPRs.
678 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
680 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
681 offset to the stack parameter list for the ELFv2 ABI.
683 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
685 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
686 set_gdbarch_convert_from_func_ptr_addr and
687 set_gdbarch_elf_make_msymbol_special for ELFv1.
688 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
689 function descriptors on ELFv1.
690 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
691 set up r12 at function entry.
693 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
695 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
696 (struct gdbarch_tdep): New member elf_abi.
698 * rs6000-tdep.c: Include "elf/ppc64.h".
699 (rs6000_gdbarch_init): Detect ELF ABI version.
701 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
703 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
704 within a register pair holding a DFP 128-bit value on little-endian.
705 (ppc64_sysv_abi_return_value_base): Likewise.
706 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
707 (dfp_pseudo_register_write): Likewise.
709 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
711 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
712 offset on little-endian when passing _Decimal32.
713 (ppc64_sysv_abi_return_value_base): Likewise for return values.
715 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
717 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
718 of the overlapped FP register within the VSX register on little-
720 (efpr_pseudo_register_write): Likewise.
722 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
724 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
725 offset on little-endian when passing small structures.
727 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
729 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
730 (struct ppc64_sysv_argpos): New data structure.
731 (ppc64_sysv_abi_push_float): Remove.
732 (ppc64_sysv_abi_push_val): New function.
733 (ppc64_sysv_abi_push_integer): Likewise.
734 (ppc64_sysv_abi_push_freg): Likewise.
735 (ppc64_sysv_abi_push_vreg): Likewise.
736 (ppc64_sysv_abi_push_param): Likewise.
737 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
738 (ppc64_sysv_abi_return_value_base): New function.
739 (ppc64_sysv_abi_return_value): Refactor to use it.
741 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
743 * NEWS: Document new target powerpc64le-*-linux*.
745 2014-02-04 Mark Kettenis <kettenis@gnu.org>
747 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
748 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
750 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
751 register set used in ELF core dumps. Add floating-point register set.
753 2014-02-03 Kevin Buettner <kevinb@redhat.com>
755 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
756 dwarf2_to_gdb[] table using symbolic constants. Adjust
757 penultimate entry from number representing the PC register
758 to symbolic constant representing the MDR register. Add
759 constant for the PC register to the end of the table.
761 2014-02-03 Mark Kettenis <kettenis@gnu.org>
763 * bsd-kvm.c: Include <sys/param.h>
765 2014-02-03 Mark Kettenis <kettenis@gnu.org>
767 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
769 2014-01-31 Joel Brobecker <brobecker@adacore.com>
771 * ada-lang.h (clear_ada_sym_cache): Delete.
773 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
775 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
777 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
779 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
780 the sigreturn register save area only if the syscall is
783 2014-01-29 Joel Brobecker <brobecker@adacore.com>
785 * valops.c (value_slice): Minor reformatting.
787 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
789 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
791 2014-01-28 Joel Brobecker <brobecker@adacore.com>
793 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
795 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
796 (ada_ignore_descriptive_types_p): New static global.
797 (find_parallel_type_by_descriptive_type): Return immediately
798 if ada_ignore_descriptive_types_p is set.
799 (_initialize_ada_language): Register new commands "maintenance
800 set ada", "maintenance show ada", "maintenance set ada
801 ignore-descriptive-types" and "maintenance show ada
802 ignore-descriptive-types".
803 * NEWS: Add entry for new "maint ada set/show
804 ignore-descriptive-types" commands.
806 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
808 * record-btrace.c (record_btrace_close): Call btrace_teardown
811 2014-01-27 Joel Brobecker <brobecker@adacore.com>
813 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
816 2014-01-27 Joel Brobecker <brobecker@adacore.com>
818 * ada-typeprint (type_is_full_subrange_of_target_type):
820 (print_range): Add parameter bounds_prefered_p. If not set,
821 try printing range types using the name of their base type.
822 (print_range_type): Add parameter bounds_prefered_p.
823 Use it in call to print_range.
824 (print_array_type, ada_print_type): Update calls to print_range
825 and print_range_type.
827 2014-01-27 Joel Brobecker <brobecker@adacore.com>
829 * ada-typeprint.c (print_array_type, print_choices, print_range)
830 (print_range_bound, print_dynamic_range_bound, print_range_type):
833 2014-01-27 Joel Brobecker <brobecker@adacore.com>
835 * ada-typeprint.c (print_range): Add missing empty line
836 after local declaration.
838 2014-01-27 Joel Brobecker <brobecker@adacore.com>
840 * ada-valprint.c (print_optional_low_bound): Get index_type's
841 target type for as long as it is a TYPE_CODE_RANGE.
843 2014-01-27 Joel Brobecker <brobecker@adacore.com>
845 * procfs.c (procfs_make_note_section): Remove assertion and
848 2014-01-24 Yao Qi <yao@codesourcery.com>
850 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
851 * corelow.c (get_core_siginfo): Likewise.
853 2014-01-24 Yao Qi <yao@codesourcery.com>
855 * remote.c (remote_write_bytes_aux): Change type of 'len' to
856 ULONGEST. Don't check 'len' is negative.
857 (remote_write_bytes): Change type of 'len' to ULONGEST.
859 2014-01-23 Tom Tromey <tromey@redhat.com>
862 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
863 Handle exception from frame.block.
864 (FrameVars.fetch_frame_locals): Likewise.
866 2014-01-23 Tom Tromey <tromey@redhat.com>
869 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
870 on a NULL pointer. Move "goto error" to correct place.
872 2014-01-23 Tom Tromey <tromey@redhat.com>
875 * python/py-framefilter.c (apply_frame_filter): Call
876 ensure_python_env after computing gdbarch.
878 2014-01-23 Yao Qi <yao@codesourcery.com>
880 * target.c (raw_memory_xfer_partial): Change argument type
881 from void * to gdb_byte *.
882 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
884 2014-01-22 Doug Evans <dje@google.com>
886 New gdbserver option --debug-format=timestamp.
889 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
891 * syscalls/s390x-linux.xml: New file.
892 * syscalls/s390-linux.xml: New file.
893 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
894 (XML_SYSCALL_FILENAME_S390X): Likewise.
895 (op_svc): New enum value for SVC opcode.
896 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
897 (s390_linux_get_syscall_number): New function.
898 (s390_gdbarch_init): Register '*get_syscall_number' and the
899 syscall xml file name.
900 * data-directory/Makefile.in (SYSCALLS_FILES): Add
901 "s390-linux.xml" and "s390x-linux.xml".
902 * NEWS: Announce new feature.
904 2014-01-22 Baruch Siach <baruch@tkos.co.il>
906 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
908 2014-01-22 Pedro Alves <palves@redhat.com>
910 * xtensa-config.c: Include defs.h.
912 2014-01-22 Joel Brobecker <brobecker@adacore.com>
914 * common/common-utils.h: Add "ARI:" comment beside __func__
917 2014-01-22 Joel Brobecker <brobecker@adacore.com>
919 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
922 2014-01-21 Roland McGrath <mcgrathr@google.com>
924 * configure.ac: Call AM_PROG_INSTALL_STRIP.
925 * configure: Regenerate.
926 * aclocal.m4: Regenerate.
927 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
928 New substituted variables.
929 (install-strip): New target.
930 (INSTALL_SCRIPT): New substituted variable.
931 (FLAGS_TO_PASS): Add it.
932 (install-only): Use $(INSTALL_SCRIPT) rather than
933 $(INSTALL_PROGRAM) for gcore.
935 2014-01-20 Tom Tromey <tromey@redhat.com>
937 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
940 2014-01-20 Tom Tromey <tromey@redhat.com>
942 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
943 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
944 (deprecated_cmd_warning, complete_on_cmdlist): Update.
945 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
946 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
947 (struct cmd_list_element) <flags>: Remove.
948 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
949 doc_allocated>: New fields.
950 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
952 * maint.c (maintenance_do_deprecate): Update.
953 * top.c (execute_command): Update.
955 2014-01-20 Baruch Siach <baruch@tkos.co.il>
957 * xtensa-linux-nat.c: Include asm/ptrace.h.
959 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
961 * Makefile.in (SFILES): Add d-support.c.
962 (COMMON_OBS): Add d-support.o.
963 * d-lang.h (d_parse_symbol): Add comment, now defined in
965 * d-lang.c (parse_call_convention)
966 (parse_attributes, parse_function_types)
967 (parse_function_args, parse_type, parse_identifier)
968 (call_convention_p, d_parse_symbol): Move functions to ...
969 * d-support.c: ... New file.
971 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
973 * d-lang.h (d_parse_symbol): Add declaration.
974 * d-lang.c (extract_identifiers)
975 (extract_type_info): Remove functions.
976 (parse_call_convention, parse_attributes)
977 (parse_function_types, parse_function_args)
978 (parse_type, parse_identifier, call_convention_p)
979 (d_parse_symbol): New functions.
980 (d_demangle): Use d_parse_symbol to demangle D symbols.
982 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
984 * d-lang.h (struct builtin_d_type): New data type.
985 (builtin_d_type): Add declaration.
986 * d-lang.c (d_language_arch_info, build_d_types)
987 (builtin_d_type): New functions.
988 (enum d_primitive_types): New data type.
989 (d_language_defn): Change c_language_arch_info to
990 d_language_arch_info.
991 (d_type_data): New static variable.
992 (_initialize_d_language): Initialize d_type_data.
994 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
996 * d-lang.h (d_main_name): Add declaration.
997 * d-lang.c (d_main_name): New function.
998 * symtab.c (find_main_name): Add call to d_main_name.
1000 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1002 * d-lang.c (d_language_defn): Change macro_expansion_c to
1005 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1007 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1009 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
1011 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1012 gdb_exception" declaration.
1013 * remote.c (getpkt_or_notif_sane): Likewise.
1015 2014-01-17 Doug Evans <dje@google.com>
1017 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1018 function, contents of dirnames_to_char_ptr_vec_append moved here.
1019 (delim_string_to_char_ptr_vec): New function.
1020 (dirnames_to_char_ptr_vec_append): Rewrite.
1021 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1023 2014-01-17 Doug Evans <dje@google.com>
1025 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1027 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1028 #include "common-utils.h".
1029 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1030 * common/vec.h (VEC_ASSERT_PASS): Update.
1031 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1032 (MACH_CHECK_ERROR): Update.
1034 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1036 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1038 * gdbarch.h: Regenerate.
1040 2014-01-16 Tom Tromey <tromey@redhat.com>
1042 * value.c (struct value) <regnum>: Move earlier.
1044 2014-01-16 Tom Tromey <tromey@redhat.com>
1046 * remote.c (extended_remote_create_inferior): Rename from
1047 extended_remote_create_inferior_1. Add "ops" argument. Remove
1050 2014-01-16 Pedro Alves <palves@redhat.com>
1052 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1053 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1056 2014-01-16 Doug Evans <dje@google.com>
1058 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1060 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1062 * btrace.h (btrace_thread_flag): New.
1063 (struct btrace_thread_info) <flags>: New.
1064 * record-btrace.c (record_btrace_resume_thread)
1065 (record_btrace_find_thread_to_move, btrace_step_no_history)
1066 (btrace_step_stopped, record_btrace_start_replaying)
1067 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1068 (record_btrace_find_resume_thread): New.
1069 (record_btrace_resume, record_btrace_wait): Extend.
1070 (record_btrace_can_execute_reverse): New.
1071 (record_btrace_open): Fail in non-stop mode.
1072 (record_btrace_set_replay): Split into this, ...
1073 (record_btrace_stop_replaying): ... this, ...
1074 (record_btrace_clear_histories): ... and this.
1075 (init_record_btrace_ops): Init to_can_execute_reverse.
1076 * NEWS: Announce it.
1078 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1080 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1081 (forward_target_decr_pc_after_break)
1082 (target_decr_pc_after_break): New.
1083 * target.c (forward_target_decr_pc_after_break)
1084 (target_decr_pc_after_break): New.
1085 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1086 instead of gdbarch_decr_pc_after_break.
1087 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1088 instead of gdbarch_decr_pc_after_break.
1089 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1090 instead of gdbarch_decr_pc_after_break.
1091 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1092 instead of gdbarch_decr_pc_after_break.
1093 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1094 instead of gdbarch_decr_pc_after_break.
1095 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1096 instead of gdbarch_decr_pc_after_break.
1098 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1100 * btrace.c: Include regcache.h.
1101 (btrace_add_pc): New.
1102 (btrace_enable): Call btrace_add_pc.
1103 (btrace_is_empty): New.
1104 * btrace.h (btrace_is_empty): New.
1105 * record-btrace.c (require_btrace, record_btrace_info): Call
1108 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1110 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1111 Support delta reads.
1112 (linux_disable_btrace): Change return type.
1113 * common/linux-btrace.h (linux_read_btrace): Change parameters
1114 and return type to allow error reporting. Update users.
1115 (linux_disable_btrace): Change return type. Update users.
1116 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1118 (btrace_error): New.
1119 (btrace_block) <begin>: Comment on BEGIN == 0.
1120 * btrace.c (btrace_compute_ftrace): Start from the end of
1122 (btrace_stitch_trace, btrace_clear_history): New.
1123 (btrace_fetch): Read delta trace, return if replaying.
1124 (btrace_clear): Move clear history code to btrace_clear_history.
1125 (parse_xml_btrace): Throw an error if parsing failed.
1126 * target.h (struct target_ops) <to_read_btrace>: Change parameters
1127 and return type to allow error reporting.
1128 (target_read_btrace): Change parameters and return type to allow
1130 * target.c (target_read_btrace): Update.
1131 * remote.c (remote_read_btrace): Support delta reads. Pass
1133 * NEWS: Announce it.
1135 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1137 * record.h (record_btrace_frame_unwind)
1138 (record_btrace_tailcall_frame_unwind): New declarations.
1139 * dwarf2-frame: Include record.h
1140 (dwarf2_frame_cfa): Throw an error for btrace frames.
1141 * record-btrace.c: Include hashtab.h.
1142 (btrace_get_bfun_name): New.
1143 (btrace_call_history): Call btrace_get_bfun_name.
1144 (struct btrace_frame_cache): New.
1146 (bfcache_hash, bfcache_eq, bfcache_new): New.
1147 (btrace_get_frame_function): New.
1148 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1149 (record_btrace_frame_this_id): Compute own id.
1150 (record_btrace_frame_prev_register): Provide PC, throw_error
1151 for all other registers.
1152 (record_btrace_frame_sniffer): Detect btrace frames.
1153 (record_btrace_tailcall_frame_sniffer): New.
1154 (record_btrace_frame_dealloc_cache): New.
1155 (record_btrace_frame_unwind): Add new functions.
1156 (record_btrace_tailcall_frame_unwind): New.
1157 (_initialize_record_btrace): Allocate cache.
1158 * btrace.c (btrace_clear): Call reinit_frame_cache.
1159 * NEWS: Announce it.
1161 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1163 * record-btrace.c (record_btrace_set_replay)
1164 (record_btrace_goto_begin, record_btrace_goto_end)
1165 (record_btrace_goto): New.
1166 (init_record_btrace_ops): Initialize them.
1167 * NEWS: Announce it.
1169 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1171 * record-btrace.c (record_btrace_find_new_threads)
1172 (record_btrace_thread_alive): New.
1173 (init_record_btrace_ops): Initialize to_find_new_threads and
1176 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1178 * record-btrace.c (record_btrace_resume): New.
1179 (record_btrace_wait): New.
1180 (init_record_btrace_ops): Initialize to_wait and to_resume.
1182 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1184 * record-btrace.c (record_btrace_xfer_partial)
1185 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1186 (record_btrace_allow_memory_access): New.
1187 (init_record_btrace_ops): Initialize new methods.
1188 * target.c (raw_memory_xfer_partial): Bail out if target reports
1189 that this memory is not available.
1191 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1193 * target.h (target_ops) <to_insert_breakpoint>
1194 <to_remove_breakpoint>: Add target_ops parameter.
1195 (forward_target_insert_breakpoint): New.
1196 (forward_target_remove_breakpoint): New.
1197 (memory_remove_breakpoint, memory_insert_breakpoint):
1198 Add target_ops parameter.
1199 * target.c (target_insert_breakpoint): Split into this and ...
1200 (forward_target_insert_breakpoint): ... this.
1201 (target_remove_breakpoint): Split into this and ...
1202 (forward_target_remove_breakpoint): ... this.
1203 (debug_to_insert_breakpoint): Add target_ops parameter.
1204 Call forward_target_insert_breakpoint.
1205 (debug_to_remove_breakpoint): Add target_ops parameter.
1206 Call forward_target_remove_breakpoint.
1207 (update_current_target): Do not inherit or default to_insert_breakpoint
1208 and to_remove_breakpoint.
1209 * corelow.c (ignore): Add target_ops parameter.
1210 * exec.c (ignore): Add target_ops parameter.
1211 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1212 Add target_ops parameter.
1213 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1214 Add target_ops parameter.
1215 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1216 Add target_ops parameter.
1217 * record-full.c (record_full_beneath_to_insert_breakpoint)
1218 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1219 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1220 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1221 (record_full_core_remove_breakpoint): Add target_ops parameter.
1223 (record_full_beneath_to_insert_breakpoint_ops)
1224 (record_full_beneath_to_remove_breakpoint_ops)
1225 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1226 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1227 tmp_to_remove_breakpoint_ops,
1228 record_full_beneath_to_insert_breakpoint_ops, and
1229 record_full_beneath_to_remove_breakpoint_ops.
1230 * remote-m32r-sdi.c (m32r_insert_breakpoint)
1231 (m32r_remove_breakpoint): Add target_ops parameter.
1232 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1233 Add target_ops parameter.
1234 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1235 Add target_ops parameter.
1237 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1238 Markus Metzger <markus.t.metzger@intel.com>
1240 * record-btrace.c: Include frame-unwind.h.
1241 (record_btrace_frame_unwind_stop_reason)
1242 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1243 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1245 (init_record_btrace_ops): Install it.
1247 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1249 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1252 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1254 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1257 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1259 * frame-unwind.c: Include target.h.
1260 (frame_unwind_try_unwinder): New function with code from ...
1261 (frame_unwind_find_by_frame): ... here. New variable
1262 unwinder_from_target, call also target_get_unwinder)
1263 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1264 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1265 * target.h (struct target_ops): New fields to_get_unwinder and
1266 to_get_tailcall_unwinder.
1267 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1269 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1271 * record-btrace.c (record_btrace_fetch_registers)
1272 (record_btrace_store_registers)
1273 (record_btrace_to_prepare_to_store): New.
1274 (init_record_btrace_ops): Add the above.
1276 2014-01-16 Tom Tromey <tromey@redhat.com>
1278 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1279 * target.h (struct target_ops) <to_prepare_to_store>: Add
1281 (target_prepare_to_store): Add argument.
1282 * target.c (debug_to_prepare_to_store): Add argument.
1283 (update_current_target): Update.
1284 * remote.c (remote_prepare_to_store): Add 'self' argument.
1285 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1286 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1287 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1288 * record-full.c (record_full_core_prepare_to_store): Add 'self'
1290 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1291 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1292 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1293 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1294 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1296 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1298 * btrace.h (replay) <replay>: New.
1299 (btrace_is_replaying): New.
1300 * btrace.c (btrace_clear): Free replay iterator.
1301 (btrace_is_replaying): New.
1302 * record-btrace.c (record_btrace_is_replaying): New.
1303 (record_btrace_info): Print insn number if replaying.
1304 (record_btrace_insn_history): Start at replay position.
1305 (record_btrace_call_history): Start at replay position.
1306 (init_record_btrace_ops): Init to_record_is_replaying.
1308 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1310 * record-btrace.c (record_btrace_insn_history_range): Include
1312 (record_btrace_insn_history_from): Adjust range.
1313 (record_btrace_call_history_range): Include
1315 (record_btrace_call_history_from): Adjust range.
1316 * NEWS: Announce changes.
1318 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1320 * record.h (enum record_print_flag)
1321 <record_print_indent_calls>: New.
1322 * record.c (get_call_history_modifiers): Recognize /c modifier.
1323 (_initialize_record): Document /c modifier.
1324 * record-btrace.c (btrace_call_history): Add btinfo parameter.
1325 Reorder fields. Optionally indent the function name. Update
1327 * NEWS: Announce changes.
1329 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1331 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1333 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1335 * btrace.c (ftrace_new_function): Start counting at one.
1336 * record-btrace.c (record_btrace_info): Adjust number of calls
1338 * NEWS: Announce it.
1340 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1342 * record-btrace.c (btrace_call_history_insn_range): Print
1343 insn range as [begin, end].
1345 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1347 * btrace.h (struct btrace_func_link): New.
1348 (enum btrace_function_flag): New.
1349 (struct btrace_inst): Rename to ...
1350 (struct btrace_insn): ...this. Update all users.
1351 (struct btrace_func) <ibegin, iend>: Remove.
1352 (struct btrace_func_link): New.
1353 (struct btrace_func): Rename to ...
1354 (struct btrace_function): ...this. Update all users.
1355 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1356 (number, level, flags>: New.
1357 (struct btrace_insn_iterator): Rename to ...
1358 (struct btrace_insn_history): ...this.
1360 (struct btrace_insn_iterator, btrace_call_iterator): New.
1361 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1362 (struct btrace_target_info) <begin, end, level>
1363 <insn_history, call_history>: New.
1364 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1365 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1366 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1367 (btrace_call_number, btrace_call_begin, btrace_call_end)
1368 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1369 (btrace_find_function_by_number, btrace_set_insn_history)
1370 (btrace_set_call_history): New.
1371 * btrace.c (btrace_init_insn_iterator)
1372 (btrace_init_func_iterator, compute_itrace): Remove.
1373 (ftrace_print_function_name, ftrace_print_filename)
1374 (ftrace_skip_file): Change
1376 (ftrace_init_func): Remove.
1377 (ftrace_debug): Use new btrace_function fields.
1378 (ftrace_function_switched): Also consider gaining and
1379 losing symbol information).
1380 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1381 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1382 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1384 (ftrace_new_function): Move. Remove debug print.
1385 (ftrace_update_lines, ftrace_update_insns): New.
1386 (ftrace_update_function): Check for call, ret, and jump.
1387 (compute_ftrace): Renamed to ...
1388 (btrace_compute_ftrace): ...this. Rewritten to compute call
1390 (btrace_fetch, btrace_clear): Updated.
1391 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1392 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1393 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1394 (btrace_call_number, btrace_call_begin, btrace_call_end)
1395 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1396 (btrace_find_function_by_number, btrace_set_insn_history)
1397 (btrace_set_call_history): New.
1398 * record-btrace.c (require_btrace): Use new btrace thread
1400 (record_btrace_info, btrace_insn_history)
1401 (record_btrace_insn_history, record_btrace_insn_history_range):
1402 Use new btrace thread info fields and new iterator.
1403 (btrace_func_history_src_line): Rename to ...
1404 (btrace_call_history_src_line): ...this. Use new btrace
1406 (btrace_func_history): Rename to ...
1407 (btrace_call_history): ...this. Use new btrace thread info
1408 fields and new iterator.
1409 (record_btrace_call_history, record_btrace_call_history_range):
1410 Use new btrace thread info fields and new iterator.
1412 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1414 * frame.h (frame_id_build_unavailable_stack_special): New.
1415 * frame.c (frame_id_build_unavailable_stack_special): New.
1417 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1419 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1420 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1421 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1423 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1424 (i386_insn_is_jump, i386_jmp_p): New.
1425 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1426 insn_is_jump to gdbarch.
1427 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1428 * gdbarch.h: Regenerated.
1429 * gdbarch.c: Regenerated.
1430 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1431 (default_insn_is_jump): New.
1432 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1433 (default_insn_is_jump): New.
1435 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1437 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1439 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1440 (btrace_read_type) <btrace_read_new>: Change to ...
1441 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1443 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1445 * common/linux-btrace.c (linux_read_btrace): Free trace from
1448 2014-01-15 Doug Evans <dje@google.com>
1450 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1453 2014-01-15 Tom Tromey <tromey@redhat.com>
1455 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1456 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1457 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1458 (set_objfile_main_name): New function.
1459 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1460 language_of_main>: New fields.
1461 (set_objfile_main_name): Declare.
1462 * symtab.c (find_main_name): Loop over objfiles to find the main
1464 (set_main_name): Now static.
1465 (get_main_info): Add comment.
1466 * symtab.h (set_main_name): Don't declare.
1468 2014-01-15 Tom Tromey <tromey@redhat.com>
1470 * symtab.c (main_progspace_key): New global.
1471 (struct main_info): New.
1472 (name_of_main, language_of_main): Remove.
1473 (get_main_info, main_info_cleanup): New function.
1474 (set_main_name, main_name, main_language): Use get_main_info.
1475 (_initialize_symtab): Initialize main_progspace_key.
1477 2014-01-15 Tom Tromey <tromey@redhat.com>
1479 * dbxread.c (process_one_symbol): Update.
1480 * dwarf2read.c (read_partial_die): Update.
1481 * symfile.c (set_initial_language): Call main_language.
1482 * symtab.c (language_of_main): Now static.
1483 (set_main_name): Add 'lang' parameter.
1484 (find_main_name): Update.
1485 (main_language): New function.
1486 (symtab_observer_executable_changed): Update.
1487 * symtab.h (set_main_name): Update.
1488 (language_of_main): Remove.
1489 (main_language): Declare.
1491 2014-01-15 Tom Tromey <tromey@redhat.com>
1493 * symfile.c (init_entry_point_info): Use new "initialized" field.
1495 * objfiles.h (struct entry_point) <initialized>: New field.
1496 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1497 (struct objfile) <ei>: ...here. Remove.
1498 * objfiles.c (entry_point_address_query): Update.
1500 2014-01-15 Tom Tromey <tromey@redhat.com>
1502 * objfiles.c (entry_point_address_query): Relocate entry point
1504 (objfile_relocate1): Do not relocate entry point address.
1505 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1506 <the_bfd_section_index>: New field.
1507 * symfile.c (init_entry_point_info): Find the entry point's
1510 2014-01-15 Tom Tromey <tromey@redhat.com>
1512 * solib-frv.c (enable_break): Use entry_point_address_query.
1514 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1516 * NEWS: Add note on improved process record-replay on
1517 arm*-linux* targets.
1519 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1521 * arm-tdep.c (enum arm_record_result): New enum.
1522 (arm_record_unsupported_insn): New function.
1523 (arm_record_coproc_data_proc): Removed.
1524 (thumb2_record_ld_st_multiple): New function.
1525 (thumb2_record_ld_st_dual_ex_tbb): New function.
1526 (thumb2_record_data_proc_sreg_mimm): New function.
1527 (thumb2_record_ps_dest_generic): New function.
1528 (thumb2_record_branch_misc_cntrl): New function.
1529 (thumb2_record_str_single_data): New function.
1530 (thumb2_record_ld_mem_hints): New function.
1531 (thumb2_record_ld_word): New function.
1532 (thumb2_record_lmul_lmla_div): New function.
1533 (thumb2_record_decode_insn_handler): New function.
1534 (decode_insn): Add thumb32 instruction handlers.
1536 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1538 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1539 (struct arm_linux_record_tdep): Declare.
1540 (arm_canonicalize_syscall): New function.
1541 (arm_all_but_pc_registers_record): New function.
1542 (arm_linux_syscall_record): New function.
1543 (arm_linux_init_abi): Add syscall recording constructs.
1544 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1545 decoding. (arm_record_coproc_data_proc): Update arm syscall
1547 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1548 <arm_syscall_record>: New field.
1549 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1552 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1554 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1555 register for push instruction recording.
1557 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1559 * arm-tdep.c (thumb_record_misc): Update to correct logical
1560 error while recording ldm, ldmia and pop instructions.
1562 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1564 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1566 2014-01-15 Pedro Alves <palves@redhat.com>
1568 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1569 (go32_resume, go32_fetch_registers, store_register)
1570 (go32_store_registers, go32_prepare_to_store)
1571 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1572 (go32_create_inferior, go32_can_run, go32_terminal_init)
1573 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1576 2014-01-15 Tom Tromey <tromey@redhat.com>
1578 * target.h (async_callback_ftype): New typedef.
1579 (struct target_ops) <to_async>: Use it.
1581 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1583 * python/py-value.c (get_field_type): Remove unnecessary curly
1584 braces for single-statement if block.
1586 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1588 * python/py-type.c (convert_field): Add missing empty line
1591 2014-01-14 Doug Evans <dje@google.com>
1593 * symfile.h (expand_symtabs_matching): Renamed from
1594 expand_partial_symbol_names. Update prototype.
1595 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1596 * symfile.c (expand_symtabs_matching): Renamed from
1597 expand_partial_symbol_names. New args file_matcher, kind.
1598 Rename arg fun to symbol_matcher.
1599 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1600 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1601 ada_expand_partial_symbol_name.
1602 (ada_make_symbol_completion_list): Update to call
1603 expand_symtabs_matching.
1604 (ada_add_global_exceptions): Call expand_symtabs_matching.
1605 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1606 call map_symbol_filenames.
1607 * symtab.c (sources_info): Update to call map_symbol_filenames.
1608 (search_symbols): Call expand_symtabs_matching.
1609 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1610 (default_make_symbol_completion_list_break_on): Update to call
1611 expand_symtabs_matching.
1612 (make_source_files_completion_list): Update to call
1613 map_symbol_filenames.
1615 2014-01-14 Doug Evans <dje@google.com>
1617 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1618 (expand_symtabs_symbol_matcher_ftype): New typedef.
1619 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1620 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1621 * symfile.c (expand_partial_symbol_names): Update to use
1622 expand_symtabs_symbol_matcher_ftype.
1623 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1624 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1625 Arg name_matcher renamed to symbol_matcher.
1626 * psymtab.c (recursively_search_psymtabs): Update to use
1627 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1629 (expand_symtabs_matching_via_partial): Update to use
1630 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1631 Arg name_matcher renamed to symbol_matcher.
1633 2014-01-14 Doug Evans <dje@google.com>
1635 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1636 (map_partial_symbol_filenames): Ditto.
1637 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1638 (map_partial_symbol_filenames): Ditto.
1639 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1640 (map_partial_symbol_filenames): Ditto.
1641 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1642 (map_partial_symbol_filenames): Ditto.
1643 * symtab.c: Delete #include "psymtab.h".
1645 2014-01-14 Pedro Alves <palves@redhat.com>
1646 Tom Tromey <tromey@redhat.com>
1648 * infrun.c (use_displaced_stepping): Use find_record_target
1649 instead of RECORD_IS_USED.
1650 (adjust_pc_after_break): Use record_full_is_used instead of
1652 * record-btrace.c (record_btrace_open): Call record_preopen
1653 instead of checking RECORD_IS_USED.
1654 * record-full.c (record_full_shortname)
1655 (record_full_core_shortname): New globals.
1656 (record_full_is_used): New function.
1657 (find_full_open): Call record_preopen instead of checking
1659 (init_record_full_ops): Set the target's shortname to
1660 record_full_shortname.
1661 (init_record_full_core_ops): Set the target's shortname to
1662 record_full_core_shortname.
1663 * record-full.h (record_full_is_used): Declare.
1664 * record.c (find_record_target): Make extern.
1665 (record_preopen): New function.
1666 * record.h (RECORD_IS_USED): Delete macro.
1667 (find_record_target, record_preopen): Declare functions.
1669 2014-01-14 Yao Qi <yao@codesourcery.com>
1671 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1672 'len''s type to ULONGEST.
1673 (core_xfer_shared_libraries_aix): Likewise.
1674 * gdbarch.c, gdbarch.h: Regenerated.
1675 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1676 Change type of 'len' to ULONGEST.
1677 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1678 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1680 2014-01-14 Yao Qi <yao@codesourcery.com>
1682 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1683 type of 'len' to ULONGEST.
1684 (linux_xfer_osdata_processgroups): Likewise.
1685 (linux_xfer_osdata_threads): Likewise.
1686 (linux_xfer_osdata_fds): Likewise.
1687 (linux_xfer_osdata_isockets): Likewise.
1688 (linux_xfer_osdata_shm): Likewise.
1689 (linux_xfer_osdata_sem): Likewise.
1690 (linux_xfer_osdata_msg): Likewise.
1691 (linux_common_xfer_osdata): Likewise.
1692 (struct osdata_type) <getter>: Likewise.
1693 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1696 2014-01-14 Yao Qi <yao@codesourcery.com>
1698 * target.h (target_xfer_partial_ftype): Update.
1699 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1701 * aix-thread.c (aix_thread_xfer_partial): Change type of
1702 argument 'len' to ULONGEST.
1703 * auxv.c (procfs_xfer_auxv): Likewise.
1704 (ld_so_xfer_auxv): Likewise.
1705 (memory_xfer_auxv): Likewise.
1706 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1707 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1708 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1709 * corelow.c (core_xfer_partial): Likewise.
1710 * ctf.c (ctf_xfer_partial): Likewise.
1711 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1713 (darwin_read_dyld_info): Likewise.
1714 (darwin_xfer_partial): Likewise.
1715 * exec.c (section_table_xfer_memory_partial): Likewise.
1716 (exec_xfer_partial): Likewise.
1717 * exec.h (section_table_xfer_memory_partial): Update
1719 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1720 instead of plongest.
1721 (gnu_xfer_partial): Likewise.
1722 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1723 (ia64_hpux_xfer_solib_got): Likewise.
1724 (ia64_hpux_xfer_partial): Likewise.
1725 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1726 * inf-ptrace.c (inf_ptrace_xfer_partial):
1727 * inf-ttrace.c (inf_ttrace_xfer_partial):
1728 * linux-nat.c (linux_xfer_siginfo): Likewise.
1729 (linux_nat_xfer_partial): Likewise.
1730 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1731 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1732 * monitor.c (monitor_xfer_memory): Likewise.
1733 (monitor_xfer_partial): Likewise.
1734 * procfs.c (procfs_xfer_partial): Likewise.
1735 * record-full.c (record_full_xfer_partial): Likewise.
1736 (record_full_core_xfer_partial): Likewise.
1737 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1738 instead of plongest.
1739 (gdbsim_xfer_partial): Likewise.
1740 * remote.c (remote_xfer_partial): Likewise.
1741 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1742 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1744 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1745 (rs6000_xfer_shared_libraries): Likewise.
1746 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1747 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1748 (sparc_xfer_partial): Likewise.
1749 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1750 (spu_xfer_partial): Likewise.
1751 * spu-multiarch.c (spu_xfer_partial): Likewise.
1752 * target.c (target_read_live_memory): Likewise.
1753 (memory_xfer_live_readonly_partial): Likewise.
1754 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1755 (target_xfer_partial, default_xfer_partial): Likewise.
1756 (current_xfer_partial): Likewise.
1757 * tracepoint.c (tfile_xfer_partial): Likewise.
1758 * windows-nat.c (windows_xfer_memory): Likewise. Call
1759 pulongest instead of plongest.
1760 (windows_xfer_partial): Likewise.
1761 (windows_xfer_shared_libraries): Likewise.
1763 2014-01-14 Yao Qi <yao@codesourcery.com>
1765 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1766 target_xfer_partial_ftype.
1768 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1772 * valops.c (value_struct_elt_bitpos): New function
1773 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1774 object to 'None' if the field name is an empty string ("").
1775 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1776 attribute to look for a field when 'name' is 'None'.
1777 (get_field_type): New function
1779 2014-01-13 Doug Evans <dje@google.com>
1782 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1783 (try_open_dwop_file): Ditto.
1784 * gdb_bfd.c: #include "vec.h".
1785 (bfdp): New typedef.
1786 (struct gdb_bfd_data): New member included_bfds.
1787 (gdb_bfd_unref): Unref all included bfds.
1788 (gdb_bfd_record_inclusion): New function.
1789 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1791 2014-01-13 Tom Tromey <tromey@redhat.com>
1793 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1795 2014-01-13 Tom Tromey <tromey@redhat.com>
1797 * defs.h (use_windows): Remove.
1798 * gdb.c (main): Update.
1799 * main.c (captured_main, gdb_main): Update.
1800 * main.h (struct captured_main_args) <use_windows>: Remove.
1801 * top.c (use_windows): Remove.
1803 2014-01-13 Tom Tromey <tromey@redhat.com>
1805 * defs.h (deprecated_flush_hook): Remove.
1807 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1810 * linux-thread-db.c (try_thread_db_load): Add parameter
1811 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1812 (try_thread_db_load_from_pdir_1): Move it there from here.
1813 (try_thread_db_load_from_sdir): Update caller.
1814 (try_thread_db_load_from_dir): Move it there from here.
1816 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1818 * regformats/regdat.sh: Always rewrite the register file.
1820 2014-01-13 Pedro Alves <palves@redhat.com>
1822 * Makefile.in (CHECK_HEADERS): New variable.
1823 (check-headers:): New rule.
1825 2014-01-13 Tom Tromey <tromey@redhat.com>
1827 * cli/cli-setshow.c (do_set_command): Update.
1828 * defs.h (deprecated_set_hook): Remove.
1829 * top.c (deprecated_set_hook): Remove.
1831 2014-01-13 Pedro Alves <palves@redhat.com>
1833 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1834 the tracepoint if the PC is a pseudo-register.
1836 2014-01-13 Tom Tromey <tromey@redhat.com>
1838 * defs.h (XCALLOC): Remove.
1839 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1840 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1841 * dwarf2loc.c (allocate_piece_closure): Likewise.
1842 * elfread.c (elf_symfile_segments): Likewise.
1843 (elf_symfile_segments): Likewise.
1844 * gdbtypes.c (copy_type_recursive): Likewise.
1845 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1846 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1847 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1849 * mt-tdep.c (mt_gdbarch_init): Likewise.
1850 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1852 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1853 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1854 * registry.c (registry_alloc_data): Likewise.
1855 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1856 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1857 * serial.c (serial_fdopen_ops): Likewise.
1858 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1860 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1861 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1864 2014-01-13 Tom Tromey <tromey@redhat.com>
1866 * defs.h (XMALLOC): Remove.
1867 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1868 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1869 * cli-out.c (struct ui_out *): Likewise.
1870 * cli/cli-dump.c (add_dump_command): Likewise.
1871 (add_dump_command): Likewise.
1872 * complaints.c (get_complaints): Likewise.
1873 (find_complaint): Likewise.
1874 * dwarf2-frame.c (execute_cfa_program): Likewise.
1875 * dwarf2read.c (abbrev_table_read_table): Likewise.
1876 * gdbarch.sh: Likewise.
1877 * gdbarch.c: Rebuild.
1878 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1879 * interps.c (interp_new): Likewise.
1880 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1881 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1882 * mi/mi-console.c (mi_console_file_new): Likewise.
1883 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1884 * mi/mi-out.c (mi_out_new): Likewise.
1885 * mi/mi-parse.c (mi_parse): Likewise.
1886 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1887 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1888 * observer.c (xalloc_observer_list_node): Likewise.
1889 * regcache.c (regcache_xmalloc_1): Likewise.
1890 * reggroups.c (reggroup_new): Likewise.
1891 (_initialize_reggroup): Likewise.
1892 * registry.c (register_data_with_cleanup): Likewise.
1893 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1894 * ser-base.c (serial_ttystate): Likewise.
1895 * ser-mingw.c (make_pipe_state): Likewise.
1896 * ser-pipe.c (pipe_open): Likewise.
1897 * serial.c (serial_open): Likewise.
1898 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1899 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1900 (tui_alloc_win_info): Likewise.
1901 (tui_add_content_elements): Likewise.
1902 * tui/tui-file.c (tui_file_new): Likewise.
1903 * tui/tui-out.c (tui_out_new): Likewise.
1904 * ui-file.c (mem_file_new): Likewise.
1905 * ui-out.c (push_level): Likewise.
1906 (make_cleanup_ui_out_end): Likewise.
1907 (append_header_to_list): Likewise.
1908 (ui_out_new): Likewise.
1909 * user-regs.c (user_reg_add_builtin): Likewise.
1911 2014-01-13 Tom Tromey <tromey@redhat.com>
1913 * defs.h (XZALLOC): Remove.
1914 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1915 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1916 (get_ada_tasks_inferior_data): Likewise.
1917 * auto-load.c (get_auto_load_pspace_data): Likewise.
1918 * auxv.c (get_auxv_inferior_data): Likewise.
1919 * bfd-target.c (target_bfd_reopen): Likewise.
1920 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1921 (deprecated_insert_raw_breakpoint): Likewise.
1922 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1923 * corelow.c (core_open): Likewise.
1924 * darwin-nat.c (darwin_check_new_threads): Likewise.
1925 (darwin_attach_pid): Likewise.
1926 * dummy-frame.c (dummy_frame_push): Likewise.
1927 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1928 * dwarf2loc.c (allocate_piece_closure): Likewise.
1929 * elfread.c (elf_symfile_segments): Likewise.
1930 * eval.c (ptrmath_type_p): Likewise.
1931 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1932 * gdbtypes.c (alloc_type_arch): Likewise.
1933 (alloc_type_instance): Likewise.
1934 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1935 * inf-child.c (inf_child_can_use_agent): Likewise.
1936 * inflow.c (get_inflow_inferior_data): Likewise.
1937 * infrun.c (save_infcall_suspend_state): Likewise.
1938 * jit.c (jit_reader_load): Likewise.
1939 (get_jit_objfile_data): Likewise.
1940 (get_jit_program_space_data): Likewise.
1941 (jit_object_open_impl): Likewise.
1942 (jit_symtab_open_impl): Likewise.
1943 (jit_block_open_impl): Likewise.
1944 (jit_frame_sniffer): Likewise.
1945 * linux-fork.c (add_fork): Likewise.
1946 * maint.c (make_command_stats_cleanup): Likewise.
1947 * objfiles.c (get_objfile_pspace_data): Likewise.
1948 * opencl-lang.c (struct lval_closure): Likewise.
1949 * osdata.c (osdata_start_osdata): Likewise.
1950 * progspace.c (new_address_space): Likewise.
1951 (add_program_space): Likewise.
1952 * remote-sim.c (get_sim_inferior_data): Likewise.
1953 * sh-tdep.c (sh_gdbarch_init): Likewise.
1954 * skip.c (Ignore): Likewise.
1955 (skip_delete_command): Likewise.
1956 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1957 (library_list_start_library): Likewise.
1958 (solib_aix_current_sos): Likewise.
1959 * solib-darwin.c (get_darwin_info): Likewise.
1960 (darwin_current_sos): Likewise.
1961 * solib-dsbt.c (get_dsbt_info): Likewise.
1962 * solib-ia64-hpux.c (new_so_list): Likewise.
1963 (ia64_hpux_get_solib_linkage_addr): Likewise.
1964 * solib-spu.c (append_ocl_sos): Likewise.
1965 (spu_current_sos): Likewise.
1966 * solib-svr4.c (get_svr4_info): Likewise.
1967 (svr4_keep_data_in_core): Likewise.
1968 (library_list_start_library): Likewise.
1969 (svr4_default_sos): Likewise.
1970 (svr4_read_so_list): Likewise.
1971 * solib-target.c (library_list_start_library): Likewise.
1972 (solib_target_current_sos): Likewise.
1973 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1974 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1975 * symfile.c (default_symfile_segments): Likewise.
1976 * target-descriptions.c (tdesc_data_init): Likewise.
1977 (tdesc_create_reg): Likewise.
1978 (struct tdesc_type *): Likewise.
1979 (tdesc_create_vector): Likewise.
1980 (tdesc_set_struct_size): Likewise.
1981 (struct tdesc_type *): Likewise.
1982 (tdesc_free_feature): Likewise.
1983 (tdesc_create_feature): Likewise.
1984 * windows-nat.c (windows_add_thread): Likewise.
1985 (windows_make_so): Likewise.
1986 * xml-support.c (gdb_xml_body_text): Likewise.
1987 (gdb_xml_create_parser_and_cleanup): Likewise.
1988 (xml_process_xincludes): Likewise.
1989 * xml-syscall.c (allocate_syscalls_info): Likewise.
1990 (syscall_create_syscall_desc): Likewise.
1992 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1994 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1995 function, with code from i386_stap_parse_special_token.
1996 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1997 (i386_stap_parse_special_token): Move code to the two functions
2000 2014-01-09 Pedro Alves <palves@redhat.com>
2001 Hui Zhu <hui@codesourcery.com>
2004 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2005 bp_err_string. Don't mark the location shlib_disabled if the
2006 error thrown wasn't a generic or memory error. Catch errors
2007 thrown while inserting breakpoints in overlayed code. Output
2008 error message of software breakpoints.
2009 * remote.c (remote_insert_breakpoint): If this breakpoint has
2010 target-side commands but this stub doesn't support Z0 packets,
2011 throw NOT_SUPPORTED_ERROR error.
2012 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2013 * target.h (target_insert_breakpoint): Extend comment.
2014 (target_insert_hw_breakpoint): Add comment.
2016 2014-01-08 Pedro Alves <palves@redhat.com>
2018 * remote.c (remote_add_thread): Add threads silently if starting
2020 (remote_notice_new_inferior): If in all-stop, and starting up,
2021 don't call notice_new_inferior.
2022 (get_current_thread): New function, factored out from ...
2023 (add_current_inferior_and_thread): ... this. Adjust.
2024 (remote_start_remote) <all-stop>: Fetch the thread list. If we
2025 found any thread, then select the remote's current thread as GDB's
2028 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2030 * NEWS: Create a new section for the next release branch.
2031 Rename the section of the current branch, now that it has
2034 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2036 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2037 * version.in: Bump version to 7.7.50.DATE-cvs.
2039 2014-01-08 Yao Qi <yao@codesourcery.com>
2041 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2042 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2043 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2045 2014-01-08 Yao Qi <yao@codesourcery.com>
2047 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2048 return value of bfd_get_filename to symbol_file_add_from_bfd.
2050 2014-01-08 Pierre Muller <muller@sourceware.org>
2053 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2054 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2055 to prim_record_mininal_symbol_and_info.
2056 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2057 in call to prim_record_minimal_symbol_and_info.
2058 (read_pe_exported_syms): Set index field of section_data.
2060 2014-01-07 Andrew Pinski <apinski@cavium.com>
2062 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2063 * features/aarch64.c: Regenerate.
2065 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2067 * target.c (return_null): Define.
2068 (update_current_target): Use it instead of return_zero for
2069 functions that return a pointer.
2071 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2073 * source.c (add_path): Fix check for duplicated paths in the previously
2076 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2078 * ada-lang.c: Remove duplicated include statements.
2079 * alphabsd-nat.c: Ditto.
2080 * amd64-darwin-tdep.c: Ditto.
2081 * amd64fbsd-nat.c: Ditto.
2082 * auto-load.c: Ditto.
2084 * breakpoint.c: Ditto.
2086 * fork-child.c: Ditto.
2087 * gdb_usleep.c: Ditto.
2088 * i386-darwin-tdep.c: Ditto.
2089 * i386fbsd-nat.c: Ditto.
2091 * inferior.c: Ditto.
2093 * linux-nat.c: Ditto.
2094 * linux-tdep.c: Ditto.
2095 * m68kbsd-nat.c: Ditto.
2096 * m68klinux-nat.c: Ditto.
2097 * microblaze-tdep.c: Ditto.
2098 * mips-linux-tdep.c: Ditto.
2099 * mn10300-tdep.c: Ditto.
2100 * nto-tdep.c: Ditto.
2101 * opencl-lang.c: Ditto.
2103 * printcmd.c: Ditto.
2104 * regcache.c: Ditto.
2105 * remote-m32r-sdi.c: Ditto.
2109 * tilegx-linux-nat.c: Ditto.
2110 * tilegx-tdep.c: Ditto.
2111 * tracepoint.c: Ditto.
2113 * vaxbsd-nat.c: Ditto.
2114 * windows-nat.c: Ditto.
2115 * xtensa-tdep.c: Ditto.
2117 2014-01-07 Yao Qi <yao@codesourcery.com>
2119 * spu-linux-nat.c (_initialize_spu_nat): Declare.
2121 2014-01-07 Yao Qi <yao@codesourcery.com>
2122 Joel Brobecker <brobecker@adacore.com>
2124 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2125 (pdc_write_regs): Likewise.
2126 (fetch_regs_kernel_thread): Likewise.
2127 (store_regs_kernel_thread): Likewise.
2129 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2131 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2132 tagged type objects to their actual type.
2134 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2136 * ada-valprint.c (print_field_values): Add "language" parameter.
2137 Update calls to print_field_values and print_variant_part.
2138 Pass new parameter "language" in call to val_print instead
2139 of "current_language". Replace call to ada_val_print by call
2141 (print_variant_part): Add "language" parameter.
2142 (ada_val_print_struct_union): Update call to print_field_values.
2144 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2146 * ada-valprint.c (ui_memcpy): Delete.
2147 (ada_print_floating): Update documentation. Add empty line
2148 between between function documentation and implementation.
2149 Delete variable "buffer". Use ui_file_xstrdup in place of
2150 ui_file_put. Minor adjustments following this change.
2152 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2154 * ada-valprint.c (ada_val_print_string): New function,
2155 extracted from ada_val_print_array.
2156 (ada_val_print_array): Replace extracted code by call
2157 to ada_val_print_string followed by a return. Move
2158 "else" branch to the function's top block.
2160 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2162 * ada-valprint.c (ada_val_print_array): Move implementation
2163 down. Rename parameter "offset" and "val" into "offset_aligned"
2164 and "original_value" respectively. Add parameter "offset".
2166 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2168 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2169 re-organizing the code. Change the "???" message printed
2170 when target type is a TYPE_CODE_UNDEF into
2171 "<ref to undefined type>".
2173 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2175 * ada-valprint.c (print_record): Delete, implementation inlined...
2176 (ada_val_print_struct_union): ... here. Remove call to
2177 ada_check_typedef in inlined implementation.
2179 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2181 * ada-valprint.c (ada_val_print_gnat_array): New function,
2182 extracted from ada_val_print_1;
2183 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2184 (ada_val_print_flt, ada_val_print_struct_union)
2185 (ada_val_print_ref): Likewise.
2186 (ada_val_print_1): Delete variables i and elttype.
2187 Replace extracted-out code by call to corresponding
2190 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2192 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2194 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2196 * ada-valprint.c (ada_val_print_1): Replace calls to
2197 ada_val_print_1 by calls to val_print.
2199 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2201 * ada-valprint.c (ada_val_print_1): Add parameter "language".
2202 Update calls to self accordingly. Replace calls to c_val_print
2203 by calls to val_print.
2205 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2207 * ada-valprint.c (print_record): Delete declaration.
2208 (adjust_type_signedness, ada_val_print_1): Likewise.
2209 (ada_val_print): Move function implementation down.
2210 (print_variant_part, print_field_values, print_record):
2211 Move function implementation up.
2213 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2215 * python/py-type.c (typy_get_name): New function.
2216 (type_object_getset): Add entry for attribute "name".
2217 * NEWS: Add entry mentioning this new attribute.
2219 2014-01-07 Yao Qi <yao@codesourcery.com>
2221 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2224 2014-01-07 Yao Qi <yao@codesourcery.com>
2226 * gnu-nat.c (info_port_rights): Add qualifier const to
2229 2014-01-07 Yao Qi <yao@codesourcery.com>
2231 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2233 2014-01-07 Yao Qi <yao@codesourcery.com>
2235 * gnu-nat.c (make_inf) Update declaration.
2236 (make_inf): Make it static.
2237 (inf_set_traced): Likewise.
2238 (inf_port_to_thread, inf_task_died_status): Likewise.
2240 2014-01-07 Yao Qi <yao@codesourcery.com>
2242 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2244 2014-01-07 Yao Qi <yao@codesourcery.com>
2246 * gnu-nat.c (_initialize_gnu_nat): Declare.
2248 2014-01-07 Yao Qi <yao@codesourcery.com>
2250 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2252 (struct gdbarch_info) <byte_order>: Change type to
2254 <byte_order_for_code>: Likewise.
2255 * gdbarch.c, gdbarch.h: Regenerated.
2257 2014-01-06 Sasha Smundak <asmundak@google.com>
2259 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2261 2014-01-06 Tom Tromey <tromey@redhat.com>
2263 * doublest.c (convert_doublest_to_floatformat): Use const, not
2265 * somread.c (som_symtab_read): Likewise.
2267 2014-01-07 Hui Zhu <hui@codesourcery.com>
2269 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2270 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2271 (gdb_bfd_fopen): Ditto.
2272 (gdb_bfd_openr): Ditto.
2273 (gdb_bfd_openw): Ditto.
2274 (gdb_bfd_openr_iovec): Ditto.
2275 (gdb_bfd_fdopenr): Ditto.
2276 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2277 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2279 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2281 * symfile-mem.c (symbol_file_add_from_memory): Removed
2282 gdb_bfd_stash_filename.
2284 2014-01-03 Doug Evans <dje@google.com>
2286 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2289 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2291 Update year range in copyright notice of all files.
2293 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2295 * top.c (print_gdb_version): Set copyright year to 2014.
2297 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2299 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2301 For older changes see ChangeLog-2013.
2307 version-control: never