gdb/ChangeLog

   1 Fri May 23 13:51:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
   2
   3         * top.c (init_cmd_lists): Always initialize endianlist.
   4         (init_main): Always define endian commands.
   5         (set_endian_big): Issue warning if endian not selectable.
   6         (set_endian_little): Ditto.
   7         (set_endian_auto): Ditto.
   8
   9 Thu May 22 11:53:21 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  10
  11         * remote-sim.c (simulator_command): Restrict access to the
  12         simulator to periods when the simulator is open.
  13
  14 Wed May 21 16:03:25 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
  15
  16         * procfs.c (init_procinfo): new function, abstracts some code
  17         shared by create_procinfo and do_attach;
  18         (procfs_set_inferior_syscall_traps): new function, abstracts
  19         some code needed by procfs_init_inferior, do_attach, and
  20         procfs_lwp_creation_handler; (procfs_first_available): new
  21         function, find any LWP that's runnable; (procfs_thread_alive):
  22         replace stub function with real implementation;
  23         (procfs_lwp_creation_handler): fix bug starting new child
  24         threads; (info_proc): bug fixes and enhancements for the
  25         "INFO PROCESSES" command; (close_procinfo_file): call new
  26         function "delete_thread" to cleanup GDB's thread database;
  27         (proc_init_failed): add new argument "kill", to control whether
  28         process is killed (so this function can be shared by
  29         create_procinfo and do_attach); (procfs_exit_handler): handle
  30         exit from an attached process, and cleanup procinfo handles
  31         when the process exits; (procfs_resume, procfs_wait): cleanup
  32         after a thread when it exits; (do_attach, do_detach): handle
  33         attached processes with multiple threads; plus some general
  34         improvements in the diagnostic output.
  35         * sol-thread.c (sol_thread_alive): replace stub with real
  36         implementation; (thread_to_lwp, lwp_to_thread): enhance to
  37         handle threads that may have exited; (sol_thread_attach): add
  38         startup setup stuff; (sol_thread_detach): add unpush_target
  39         call; (sol_thread_mourn_inferior): add unpush_target call;
  40         (sol_thread_wait, sol_thread_resume): enhance to deal with
  41         thread exit cleanly; (sol_thread_new_objfile,
  42         sol_thread_pid_to_str): detect unsuccessful startup and
  43         don't crash; plus some general cleanup.
  44         * thread.c (delete_thread): new function, allows targets to
  45         notify gdb when a thread is no longer valid.
  46         * infrun.c (wait_for_inferior): don't try to detect a new
  47         thread on receiving a TARGET_EXITED event.
  48
  49 Tue May 20 09:32:02 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  50
  51         * remote-sim.c (gdbsim_open): Pass callback struct.
  52         (init_callbacks): Remove call to sim_set_callbacks.
  53
  54 Thu May 15 07:56:50 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
  55
  56         * config/rs6000/tm-rs6000.h (SIG_FRAME_LR_OFFSET):  Define.
  57         * rs6000-tdep.c (frameless_function_invocation):  Mark frames
  58         with a zero PC as frameless to improve backtraces from core dumps
  59         caused by dereferencing a NULL function pointer.
  60         (frameless_function_invocation, frame_saved_pc, rs6000_frame_chain):
  61         Handle frameless functions interrupted by a signal.
  62
  63         * sparc-tdep.c (sparc_init_extra_frame_info, sparc_frame_saved_pc):
  64         Handle frameless functions interrupted by a signal.
  65
  66 Wed May 14 08:58:55 1997  Jeffrey A Law  (law@cygnus.com)
  67
  68         * mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments
  69         to reflect current reality.  Gross attempt at handling out of
  70         line prologues.
  71
  72         * mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug
  73         symbols to find the end of the prologue.
  74         * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
  75
  76 start-sanitize-tic80
  77 Wed May 14 12:04:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  78
  79         * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.
  80
  81 end-sanitize-tic80
  82 start-sanitize-tic80
  83 Mon May 12 11:35:04 1997  Mark Alexander  <marka@cygnus.com>
  84
  85         * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
  86         basic C80 features working.
  87
  88 end-sanitize-tic80
  89 Thu May  8 08:42:47 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  90
  91         * configure.in (AC_TYPE_SIGNAL): Add
  92         * configure: Re-generate.
  93         * remote-sim.c: Signal returns RETSIGTYPE.
  94
  95 start-sanitize-gdbtk
  96 Wed May  7 19:10:19 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  97
  98         * gdbtk.c (wrapped_call): New function - make actual call to tk
  99         worker function.
 100         (call_wrapper): Rewrite to use top.c:catch_errors.
 101
 102         * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
 103         best.
 104
 105 end-sanitize-gdbtk
 106 Wed May  7 20:05:07 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 107
 108         * target.h (target_stop): Drop argument so it can be tested for
 109         NULL.
 110
 111 Sat May  3 20:51:48 1997  Mark Alexander  <marka@cygnus.com>
 112
 113         * utils.c (floatformat_from_doublest): Handle infinity properly.
 114
 115 Thu May  1 11:44:46 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
 116
 117         * Finalize merge from Hurd folk.
 118             Mon Oct 30 16:41:04 1995  Miles Bader  <miles@gnu.ai.mit.edu>
 119             * thread.c (thread_apply_command, thread_apply_all_command,
 120             thread_command): Make sure TP is alive.
 121             (thread_alive): New function.
 122             Tue Nov 14 14:31:03 1995  Miles Bader  <miles@gnu.ai.mit.edu>
 123             * infrun.c (sig_print_info): Deal better with long signal names.
 124             Wed Nov 22 15:23:35 1995  Miles Bader  <miles@gnu.ai.mit.edu>
 125             * thread.c (thread_id_to_pid): New function.
 126             Fri Dec  1 13:25:25 1995  Miles Bader  <miles@gnu.ai.mit.edu>
 127             * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
 128             set_thread_default_cmd_list, show_thread_default_cmd_list):
 129             New variables.  (set_thread_cmd, show_thread_cmd,
 130             set_thread_default_cmd, show_thread_default_cmd): New functions.
 131             Fri Apr 18 15:20:16 1997  Miles Bader  <miles@gnu.ai.mit.edu>
 132             * gnu-nat.c (inf_startup): remove TASK parameter.
 133             (inf_set_task): replace with new function (inf_set_pid).
 134           * gdbthread.h: Add extern decl for thread_cmd_list.
 135
 136 Thu May  1 02:28:21 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 137
 138         * printcmd.c (disassemble_command):  Adjust low function bound
 139         by FUNCTION_START_OFFSET.
 140
 141 start-sanitize-tic80
 142 Wed Apr 30 15:23:02 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 143
 144         * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
 145
 146 end-sanitize-tic80
 147 Mon Apr 28 21:25:32 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
 148
 149         * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
 150         * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
 151         in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
 152         satisfy symbol dependancy in solib.c (core_ops).
 153         * target.[ch] conditionalize Mach-specific signals so that they
 154         won't show up in non-Mach gdb's!
 155         * thread.c: change name of static function "thread_switch" to
 156         "switch_to_thread", to avoid conflict with Mach global symbol;
 157         move thread_cmd_list to global scope so targets can add their
 158         own thread commands.
 159         * infrun.c: sig_print_info: allow for long signal names.
 160         * gnu-nat.[ch]: tidying up comments.
 161         * gnu-nat.c: remove calls to prune_threads and renumber_threads;
 162         gnu_wait must not return -1 when inferior exits;
 163         attach_to_child will modify inferior_pid in a way that allows
 164         fork_inferior to remain unchanged; remove extra arg from
 165         startup_inferior; move Mach thread commands here from thread.c.
 166
 167 Mon Apr 28 18:21:20 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
 168
 169         * symtab.c: decode_line_1, replace the assignment to
 170         values.sals[0].pc which I accidentally left out on 4/3/97.
 171
 172 Mon Apr 28 17:27:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
 173
 174         * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
 175         (fix by Bob Manson).
 176         * top.c: change "to enable to enable" to "to enable" in a couple
 177         of help strings.
 178
 179 Mon Apr 28 09:01:59 1997  Mark Alexander  <marka@cygnus.com>
 180
 181         * breakpoint.c (remove_breakpoint): Pass correct type to
 182         target_remove_watchpoint.
 183         * target.h: Improve comment for target_{remove,insert}_breakpoint.
 184
 185 Sat Apr 26 03:38:02 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 186
 187         * alpha-tdep.c (heuristic_proc_desc):  Increase search limit
 188         for return address register, handle `ret' instruction.
 189
 190         * corelow.c (get_core_registers):  Initialize cf.
 191
 192         * procfs.c:  Minor changes to make pre-ANSI compilers happy.
 193         (procfs_notice_signals):  Copy traced signal set back to
 194         pi->prrun.pr_trace.
 195         (unconditionally_kill_inferior):  If PR_DEAD is defined,
 196         rerun inferior after killing it.
 197
 198 Fri Apr 25 00:10:18 1997  Jeffrey A Law  (law@cygnus.com)
 199
 200         * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
 201         structure value address is found in $a0 now.
 202         * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
 203
 204 Thu Apr 24 13:31:10 1997  Jeffrey A Law  (law@cygnus.com)
 205
 206         * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
 207         returned in $a0.
 208         (EXTRACT_RETURN_VALUE): Likewise.
 209
 210         * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
 211         insn at "pc", not "fi->pc".
 212
 213 start-sanitize-tic80
 214 Thu Apr 24 16:11:47 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 215
 216         * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
 217         (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
 218         MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
 219         (NPC_REGNUM): Tic80 has a delay slot.
 220         (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
 221         register blocks.
 222
 223 end-sanitize-tic80
 224 Wed Apr 23 11:18:45 1997  Jeffrey A Law  (law@cygnus.com)
 225
 226         * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
 227         returned in $a0.
 228         (EXTRACT_RETURN_VALUE): Likewise.
 229
 230 Tue Apr 22 11:58:15 1997  Fred Fish  <fnf@cygnus.com>
 231
 232         * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
 233         floatformat_ieee_double_littlebyte_bigword for little endian
 234         target byte order.
 235         * utils.c (floatformat_to_doublest): Create local preswapped
 236         copy of input for floatformat_littlebyte_bigword formats.
 237         (get_field, put_field): Treat floatformat_littlebyte_bigword
 238         the same as floatformat_little.
 239         (floatformat_from_doublest): Postswap output words for
 240         the floatformat_littlebyte_bigwords format.
 241
 242 start-sanitize-tic80
 243 Mon Apr 21 22:44:47 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 244
 245         * config/tic80/tic80.mt (SIM): Link in simulator.
 246
 247 end-sanitize-tic80
 248 Tue Apr 22 09:02:10 1997  Stu Grossman  (grossman@critters.cygnus.com)
 249
 250         * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
 251         config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
 252         vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
 253         aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
 254 start-sanitize-v850
 255         config/v850/v850.mt:
 256 end-sanitize-v850
 257         Remove -lm.  That's now handled by configure.
 258
 259         * Makefile.in (maintainer-clean):  Add distclean to dependencies.
 260         Remove duplicate rm's of files.
 261
 262 start-sanitize-gdbtk
 263 Mon Apr 21 14:00:08 1997  Doug Evans  <dje@canuck.cygnus.com>
 264
 265         * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
 266
 267 end-sanitize-gdbtk
 268 Mon Apr 21 09:49:25 1997  Stu Grossman  (grossman@critters.cygnus.com)
 269
 270         * remote-pa.c:  Remove.  It's broken and no longer necessary.
 271
 272 Sat Apr 19 11:56:10 1997  Per Bothner  <bothner@deneb.cygnus.com>
 273
 274         * java-exp.y:  Combine TRUE and FALSE into BOOLEAN_LITERAL.
 275         (Avoids name clash with broken AIX header files.)
 276
 277 Sat Apr 19 01:49:37 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 278
 279         * serial.c (serial_log_command):  Fix fputs_unfiltered calls.
 280
 281         * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
 282         (DONT_RELOCATE_SYMFILE_OBJFILE):  Removed.
 283         * xcoffsolib.h (struct vmap):  Add new members tvma, toffs and dvma,
 284         remove tadj.
 285         * exec.c (bfdsec_to_vmap):  Initialize new vmap members, initialize
 286         tstart and dstart with section VMA.
 287         * rs6000-nat.c (vmap_symtab):  Relocate relative to the VMA in the
 288         object file.
 289         (vmap_ldinfo, xcoff_relocate_core):  Adjust tstart by section offset
 290         of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
 291         (vmap_exec):  Relocate relative to the VMA in the object file,
 292         relocate .bss section as well.
 293         (xcoff_relocate_core):  No longer adjust section addresses by VMA.
 294         * rs6000-tdep.c (find_toc_address):  Change type of tocbase
 295         to CORE_ADDR.
 296         * xcoffread.c (secnum_to_bfd_section):  New routine to get
 297         BFD section from CS section number.
 298         (scan_xcoff_symtab):  Make toc_offset section relative.
 299
 300         * symtab.c (total_number_of_methods):  Avoid core dump if
 301         baseclass type is still undefined.
 302
 303 Fri Apr 18 17:25:10 1997  Stu Grossman  (grossman@critters.cygnus.com)
 304
 305         * Makefile.in (SUBDIRS):  Add mswin so that make cleanup cleans up
 306         that directory.
 307         * defs.h utils.c (error warning):  Make message be const.
 308         * main.c (fputs_unfiltered):  Only send gdb_stdout and gdb_stderr
 309         to hook.  Otherwise send it to fputs.
 310         * monitor.c monitor.h (monitor_get_dev_name):  New function.  Does
 311         the obvious.
 312         * remote-e7000.c:  Remove debugify stuff.  Change printf, fprintf
 313         to _filtered forms to make output appear in GUIs.  Replace all
 314         uses of SERIAL_READCHAR with readchar, which has better error
 315         checking.
 316         * (e7000_parse_device):  Add prototype.
 317         (readchar):  Improve doc.  Handle random serial errors.
 318         (expect):  Disable notice_quit code.  It's busted.  Remove
 319         serial error handling (it's now handled in readchar).  Remove
 320         remote_debug echoing.  That's handled in readchar as well.
 321         (e7000_parse_device):  Remove serial_flag arg.  It's not
 322         necessary.
 323         (e7000_open):  Split into two pieces.  Second part is
 324         e7000_start_remote, and is error protected.  Now, when we connect
 325         to the target, we setup the initial frame and registers so that
 326         the user gets an immediate indication of where the target is.
 327         (gch):  Remove debug output.  That's handled by readchar.
 328         (e7000_read_inferior_memory):  Handle errors better.
 329         (_initialize_remote_e7000):  Get rid of `<xxx>' things from
 330         command names.  They show up when doing completion and confuse
 331         things horribly.
 332         * ser-e7kpc.c: Get rid of the DLL's since we can access the device
 333         directly from Win32s and Win95.  Get rid of debugify crud.
 334         * serial.c:  Remove debugify cruft.
 335         * (serial_logchar serial_log_command serial_write serial_readchar
 336         serial_send_break serial_close):  Merge common functionality into
 337         serial_logchar.  Clean up rest of routines.
 338         * sparclet-rom.c:  Disembowel.  Leave only download routine.
 339         Download routine now switches to remote target automatically.
 340         * top.c (disconnect):  Only define if SIGHUP is defined.  Cleans
 341         up MSVC/Win32 problem.
 342         * utils.c (gdb_flush):  Don't call hook unless it's for gdb_stdout
 343         or gdb_stderr.
 344         * config/sh/tm-sh.h:  Define TARGET_SH for WinGDB.
 345         * config/sparc/tm-sparclet.h:  Remove override for prompt.
 346
 347 Fri Apr 18 13:38:19 1997  Doug Evans  <dje@canuck.cygnus.com>
 348
 349         * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
 350         TARGET_BYTE ORDER_SELECTABLE.
 351
 352 Fri Apr 18 16:52:41 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 353
 354         * remote-sim.c (init_callbacks): Initialize poll_quit and magic
 355         fields of gdb_callback.
 356         (gdbsim_stop): Add gdbsim_stop to list of supported client
 357         operations.
 358         (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
 359         sim_wait where gdb is in a position to handle a long running
 360         function.
 361         (gdbsim_cntrl_c): New function.  Wrap the sim_resume call in a
 362         SIGINT handler.
 363         (gdb_os_poll_quit): New function. Check for a quit pending on the
 364         console.
 365
 366 start-sanitize-gdbtk
 367 Wed Apr 16 12:33:06 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 368
 369         * Makefile.in (install-only): Make list of gdbtcl files to install
 370         explicit - was picking up files such as ChangeLog etc.
 371         (install-only): Don't blindly create the directory.
 372
 373 end-sanitize-gdbtk
 374 Thu Apr 17 14:30:04 1997  Per Bothner  <bothner@deneb.cygnus.com>
 375
 376         * defs.h (enum language):  Add language_java.
 377         * java-exp.y, java-lang.c, java-lang.h, java-valprint.c:  New files.
 378         * Makefile.in:  Update for new files.
 379         * objfiles.c (allocate_objfile):  Allow NULL bfd argument.
 380         * symfile.c (deduce_language_from_filename):  Recognize .java.
 381
 382 Thu Apr 17 02:20:23 1997  Doug Evans  <dje@canuck.cygnus.com>
 383
 384         * m32r-stub.c (stash_registers): Rewrite.
 385         (restore_registers): Renamed to restore_and_return.
 386         (cleanup_stash): New function.
 387         (process_exception): New function.
 388         (_catchException*): Rewrite.
 389
 390         * remote-sim.c (gdbsim_load): Update call to sim_load.
 391         (gdbsim_create_inferior): No longer pass start_address to
 392         sim_create_inferior.
 393         (gdbsim_open): Pass endian indicator as arg.
 394
 395 Tue Apr 15 15:31:09 1997  Stan Shebs  <shebs@andros.cygnus.com>
 396
 397         * remote.c (get_offsets): Don't use scanf for interpreting
 398         response to qOffsets.
 399
 400 Tue Apr 15 14:51:04 1997  Ian Lance Taylor  <ian@cygnus.com>
 401
 402         * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
 403         (INSTALL_XFORM1): Remove.
 404         (install-only): Use $(program_transform_name) directly, rather
 405         than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
 406         (uninstall): Transform name.
 407
 408 Mon Apr 14 17:06:27 1997  Mark Alexander  <marka@cygnus.com>
 409
 410         * remote-mips.c (mips_load): Ensure that PC gets updated
 411         after a load on LSI target.
 412
 413 Mon Apr 14 15:54:51 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
 414
 415         * procfs.c (notice_signals): fix typo
 416
 417 Mon Apr 14 16:25:10 1997  Ian Lance Taylor  <ian@cygnus.com>
 418
 419         * gdbserver/Makefile.in (INSTALL): Change install.sh to
 420         install-sh.
 421
 422 Mon Apr 14 11:55:27 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
 423
 424         * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
 425         since gcc automatically includes it
 426
 427 Thu Apr 10 13:20:53 1997  Geoffrey Noer  <noer@cygnus.com>
 428
 429         * procfs.c: Substantial (but incomplete) changes to support
 430         sysv4.2mp procfs as implemented in UnixWare 2.1.  The procinfo
 431         struct now has substructs like struct flt_ctl instead of
 432         just a fltset_t and has a ctl_fd, status_fd, as_fd, and
 433         map_fd instead of a single fd.  Non-sysv4.2mp procfs models
 434         still have the structs and multiple fds, but don't use the
 435         entire struct and the four fds all point to the same thing.
 436         We use PROCFS_USE_READ_WRITE to decide whether to talk to
 437         procfs with reads/writes or use ioctl instead.  We use
 438         HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
 439         multiple fds or not.  PROC_NAME_FMT is split out into
 440         CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
 441         STATUS_PROC_NAME_FMT.
 442
 443         (procfs_notice_signals): now a necessary wrapper around
 444         (notice_signals): which are the new guts for noticing signals
 445         (open_proc_file): gets a new flag arg used in sysv4.2mp to
 446         determine whether or not to attempt to open the ctl_fd.
 447         (procfs_read_status): new local function, reads procfs status
 448         (procfs_write_pcwstop): new local function, writes a PCWSTOP
 449         (procfs_write_pckill): new local function, writes a PCKILL
 450         (unconditionally_kill_inferior): remove signo since we now
 451         just call procfs_write_pckill().
 452         (procfs_xfer_memory): call lseek with SEEK_SET rather than 0
 453         (proc_iterate_over_mappings): the whole function is ifdefed
 454         on UNIXWARE to keep things readable.
 455
 456         Expanded the syscall_table to include new potential sysv4.2mp
 457         members.  Note that all ifdefs of UNIXWARE should be eliminated
 458         if possible or renamed to describe what's being selected for a
 459         bit better.  Sysv4.2mp and IRIX both have SYS_sproc so the
 460         IRIX specific code now also checks it's not UNIXWARE.
 461
 462         * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
 463         HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
 464         * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
 465         "/debug/%d" as PROC_NAME_FMT used to be
 466
 467 Wed Apr  9 11:36:14 1997  Jeffrey A Law  (law@cygnus.com)
 468
 469         * mn10300-tdep.c: Almost completely rewritten based on mn10200
 470         port.
 471         * config/mn10300/tm-mn10300.h: Likewise.
 472
 473 Tue Apr  8 10:45:24 1997  Stu Grossman  (grossman@critters.cygnus.com)
 474
 475         * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}:  Remove
 476         remote-pa.o from TDEPFILES.  Nobody uses it, and besides, it's a
 477         lousy out-of-date clone of remote.c.
 478
 479 Fri Apr  4 08:21:21 1997  Stu Grossman  (grossman@critters.cygnus.com)
 480
 481         * remote.c:  Fix problems realized while showering.
 482         * (hexnumlen):  Add prototype.  Use max, not min.
 483         * (remote_write_bytes remote_read_bytes):  Fix max packet size
 484         calculations to properly account for packet overhead.  Also handle
 485         (probably rare) case where remote_register_buf_size isn't set.
 486
 487         * remote.c:  Fix doc for `C' and `S' commands to indicate full
 488         address.
 489         * (remote_ops extended_remote_ops remote_desc remote_write_size):
 490         Make static.
 491         * (remote_fetch_registers remote_write_bytes remote_read_bytes):
 492         Record size of response to fetch registers command, use this to
 493         limit size of memory read and write commands.
 494         * (push_remote_target):  New function to make it possible to have
 495         another target switch to the remote target.
 496         * target.h:  Add prototype for push_remote_target.
 497         * sh-tdep.c (sh_frame_find_saved_regs):  Fix sign extension bugs
 498         for hosts which default to unsigned chars (such as SGI's).
 499         * (_initialize_sh_tdep):  Don't set remote_write_size.  It's now
 500         handled automatically in remote.c.
 501
 502 Thu Apr  3 15:10:30 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
 503
 504         * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
 505         find_pc_sect_function(), find_pc_sect_partial_function(): new
 506         functions for debugging overlays; pc without section is ambiguous.
 507         * breakpoint.[ch]: add section pointer to breakpoint struct;
 508         add section argument to check_duplicates(); check section as well
 509         as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
 510         breakpoint_thread_match(), bpstat_stop_status()];
 511         add section argument to describe_other_breakpoints();
 512         use INIT_SAL() macro to zero-out new sal structures;
 513         make resolve_sal_pc() fix up the sal's section as well as its pc;
 514         match on section + pc in clear_command() and delete_breakpoint();
 515         account for overlay sections in insert_breakpoints(),
 516         remove_breakpoint() and breakpoint_re_set_one();
 517         all this to support overlays where a PC is not unique.
 518         * exec.c: change xfer_memory() to handle overlay sections.
 519         * findvar.c: change read_var_value() to handle overlay sections.
 520         * frame.h: declaration for block_for_pc_sect() [blockframe.c].
 521         * infcmd.c: jump_command() warns against jumping into an overlay
 522         that's not in memory.  Also use INIT_SAL() to initialize sals.
 523         * infrun.c: wait_for_inferior() sets a flag to invalidate cached
 524         overlay state information; Also use INIT_SAL() to init sals.
 525         * m32r-rom.c: modify load routines to use LMA instead of VMA.
 526         * m32r-stub.c: mask exit value down to 8 bits; screen out any
 527         memory read/writes in the range 600000 to a00000, and ff680000
 528         to ff800000 (hangs because nothing is mapped there); fix strcpy().
 529         * maint.c: maintenance command "translate-address" supports overlays.
 530         * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
 531         * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
 532         this constitutes gdb's internal overlay mapping table.  Add macro
 533         ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
 534         Add function find_pc_sect_section().
 535         * printcmd.c: modify print_address_symbolic() with overlay smarts;
 536         modify address_info() with overlay smarts; add function sym_info()
 537         to support the INFO SYMBOL command (translate address to symbol(s));
 538         modify disassemble_command() to work on unmapped overlays.
 539         * source.c: use INIT_SAL() to initialize sals.
 540         * symfile.[ch]: change generic_load() to use section's LMA address
 541         instead of VMA address, for overlay sections.
 542         Add numerous functions for finding a PC's section / overlay,
 543         translating between VMA and LMA address ranges, determining if an
 544         overlay section is mapped, etc.  Add several user commands for
 545         overlay debugging.  Add support for a "generic" form of automatically
 546         reading overlay mapping info from the inferior (based on the default
 547         (simple) overlay manager which Cygnus provides as an example).
 548         * symtab.[ch]: add functions find_pc_sect_symtab(),
 549         find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
 550         for lookup; modify lookup_symbol and decode_line_1() to use them;
 551         modify find_function_start_sal() to account for overlay sections;
 552         add macro INIT_SAL() for initializing struct symtab_and_line.
 553         * target.c: fix a comment in the declaration of target_ops.
 554
 555 Thu Apr  3 10:31:12 1997  Mark Alexander  <marka@cygnus.com>
 556
 557         * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
 558         mips_skip_stub, mips_ignore_helper): New functions for dealing
 559         with MIPS16 call/return thunks.
 560         (mips_init_frame_pc_first): New function to implement
 561         INIT_FRAME_PC_FIRST macro; includes code from old macro plus
 562         new code to skip over MIPS16 thunks.
 563         (mips_frame_chain): Skip over MIPS16 thunks.
 564         * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
 565         mips_skip_stub, mips_ignore_helper): Declare.
 566         (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
 567         SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
 568         the above functions.
 569         (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
 570         (mips_init_frame_pc): Declare.
 571         * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
 572         to decide if certain library function calls should be ignored.
 573
 574 Wed Apr  2 14:16:51 1997  Doug Evans  <dje@canuck.cygnus.com>
 575
 576         * remote-sim.c (gdbsim_open): Check return code from sim_open.
 577         Update call to sim_open (new arg SIM_OPEN_DEBUG).
 578
 579 start-sanitize-gdbtk
 580 Tue Apr  1 15:04:21 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 581
 582         * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
 583         of gdbtk.tcl.
 584
 585 end-sanitize-gdbtk
 586 Mon Mar 31 14:55:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 587
 588         * gdbinit.in: New file.
 589         * .gdbinit: Remove.
 590         * configure.in: Generate .gdbinit from gdbinit.in.
 591         * configure: Rebuild.
 592
 593 start-sanitize-tic80
 594 Sun Mar 30 12:28:24 1997  Fred Fish  <fnf@cygnus.com>
 595
 596         * config/tic80/tic80.mt: Disable using the simulator
 597         until it is ready.
 598
 599 end-sanitize-tic80
 600 Sat Mar 29 13:57:20 1997  Fred Fish  <fnf@cygnus.com>
 601
 602         * COPYING: Install new version of file from FSF.
 603         * copying.c (show_copying_command): Update FSF address.
 604
 605 Fri Mar 28 18:33:41 1997  Ian Lance Taylor  <ian@cygnus.com>
 606
 607         * Makefile.in (distclean): Remove .gdbinit.
 608
 609 start-sanitize-tic80
 610 Fri Mar 28 15:37:30 1997  Fred Fish  <fnf@ninemoons.com>
 611
 612         * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
 613
 614 end-sanitize-tic80
 615 Fri Mar 28 15:38:04 1997  Mike Meissner  <meissner@cygnus.com>
 616
 617         * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
 618         to va_list from void *, since va_list might not be a pointer
 619         type.
 620
 621 start-sanitize-gdbtk
 622 Fri Mar 28 17:04:02 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 623
 624         * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
 625         default, not $(srcdir).
 626
 627 end-sanitize-gdbtk
 628 Thu Mar 27 14:21:46 1997  Mark Alexander  <marka@cygnus.com>
 629
 630         * remote-mips.c: Clean up comment and extraneous semicolon
 631         for mips_monitor_prompt variable.
 632
 633 Thu Mar 27 12:46:58 1997  Mark Alexander  <marka@cygnus.com>
 634
 635         * remote-mips.c: Add `set monitor-prompt' command.
 636
 637 Wed Mar 26 06:47:44 1997  Mark Alexander  <marka@cygnus.com>
 638
 639         Fix from Peter Schauer:
 640         * mdebugread.c (parse_procedure): Set address of procedure to
 641         block start; this fixes problems with shared libraries introduced
 642         by change of Mar 21.
 643
 644 Mon Mar 24 19:43:16 1997  Geoffrey Noer  <noer@cygnus.com>
 645
 646         * symtab.c (find_pc_symtab): change to support the case
 647         where the objfile is reordered and contains both coff and
 648         stabs debugging info (continue on if a psymtab isn't found).
 649
 650 Sun Mar 23 16:19:20 1997  Mark Alexander  <marka@cygnus.com>
 651
 652         Fixes from Peter Schauer:
 653         * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
 654         REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
 655         is big-endian and if registers are 32 bits.
 656         * mips-tdep.c (mips_print_register, mips_extract_return_value,
 657         mips_store_return_value): Fix floating-point word-order problems on
 658         little-endian targets introduced by changes of Mar 21.
 659
 660 Sun Mar 23 15:43:27 1997  Stan Shebs  <shebs@andros.cygnus.com>
 661
 662         * remote.c (target_resume_hook, target_wait_loop_hook): New
 663         globals.
 664         (remote_resume, remote_wait): Use them.
 665         * d10v-tdep.c: Set the above hooks.
 666         (tracesource): New GDB variable, controls source display in
 667         traces.
 668         (display_trace): Find and display source line if requested.
 669         (trace_info): Mention empty trace buffer if appropriate.
 670         (tdisassemble_command): Robustify argument handling.
 671
 672         * configure.host: Remove extra bogus Linux case.
 673
 674 Sat Mar 22 16:41:35 1997  Fred Fish  <fnf@cygnus.com>
 675
 676         * remote-sim.c (simulator_command): Add comment about dealing with
 677         NULL or empty args.
 678 start-sanitize-tic80
 679         * Makefile.in (tic80-tdep.o): Add target.
 680         * configure.tgt: Add tic80 case.
 681         * tic80-tdep.c: New file.
 682         * config/tic80/{tic80.mt, tm-tic80.h}: New files.
 683 end-sanitize-tic80
 684
 685 Sat Mar 22 02:48:11 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 686
 687         * c-exp.y (yylex):  Handle nested template parameter lists.
 688         * symtab.c (decode_line_2):  Fix test for valid choice number.
 689
 690 Fri Mar 21 19:10:05 1997  Mark Alexander  <marka@cygnus.com>
 691
 692         * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
 693         copy first two floating point arguments to general registers, so that
 694         MIPS16 functions will receive the arguments correctly.
 695         (mips_print_register): Print double registers correctly on
 696         little-endian hosts.
 697         (mips_extract_return_value): Return double values correctly
 698         on little-endian hosts.
 699
 700         * mdebugread.c (parse_procedure): Adjust address of procedure relative
 701         to address in file descriptor record; this accounts for constant
 702         strings that may precede functions in the text section.  Remove
 703         now-useless lowest_pdr_addr from argument list and all calls.
 704
 705 Fri Mar 21 15:36:25 1997  Michael Meissner  <meissner@cygnus.com>
 706
 707         * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
 708         whether the simulator will be built by whether the Makefile in the
 709         simulator directory was built.
 710
 711         * configure.in (--enable-sim-powerpc): Delete switch.
 712         * configure: Regenerate.
 713
 714 Thu Mar 20 20:52:04 1997  Jeffrey A Law  (law@cygnus.com)
 715
 716         * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
 717         in the prologue too.
 718
 719         * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
 720         compilers.
 721         (gdb_os_evprintf_filtered): Similarly.
 722
 723 Wed Mar 19 16:13:22 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
 724
 725         New UnixWare 2.1 configuration
 726         * config/i386/i386v42mp.mt: new
 727         * config/i386/i386v42mp.mh: new
 728         * config/i386/tm-i386v42mp.h: new
 729         * config/i386/nm-i386v42mp.h: new
 730         * configure.tgt: added new entries
 731         * configure.host: added new entries
 732
 733 start-sanitize-gdbtk
 734 Wed Mar 19 15:16:17 1997  Martin M. Hunt  <hunt@onions.cygnus.com>
 735
 736         * Makefile.in:  Install gdbtcl dir instead of gdbtk.tcl.
 737
 738         * gdbtk.c: Added some ifdefs for Windows.  Changed GDBTK_FILENAME
 739         to GDBTK_LIBRARY, which is now a path to search.
 740         (gdb_path_conv): New function.  Convert Cygwin32 pathname to
 741         DOS-style pathname.
 742
 743         * {aclocal.m4,configure.in}: Changes for Windows builds.
 744
 745         * configure: Rebuilt.
 746
 747 end-sanitize-gdbtk
 748 Mon Mar 17 17:52:00 1997  J.T. Conklin  <jtc@cygnus.com>
 749
 750         * dsrec.c (load_srec): Print leading zeroes when printing section
 751         addresses.
 752
 753 Mon Mar 17 15:00:16 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 754
 755         * remote-sim.h: Delete - moved to ../include/remote-sim.h.
 756
 757         * Makefile.in (remote_utils_h): Update path to remote-sim.h.
 758
 759 Fri Mar  7 20:55:28 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 760
 761         * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
 762         vprintf_filtered, evprintf_filtered): Callbacks that accept
 763         varargs.
 764
 765 Sat Mar 15 00:50:46 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 766
 767         * breakpoint.c (insert_breakpoints, watchpoint_check,
 768         bpstat_stop_status):  Do not disable watchpoints going out of scope.
 769         (insert_breakpoints):  Make sure that the current frame is valid
 770         before calling find_frame_addr_in_frame_chain.
 771
 772         * top.c (setup_user_args):  Handle quotes and backslashes.
 773         (print_gdb_version):  Update copyright year.
 774
 775 Fri Mar 14 15:44:03 1997  Ian Lance Taylor  <ian@cygnus.com>
 776
 777         * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
 778
 779 start-sanitize-gdbtk
 780 Fri Mar 14 10:01:29 1997  Tom Tromey  <tromey@cygnus.com>
 781
 782         * configure: Regenerated.
 783         * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
 784
 785 end-sanitize-gdbtk
 786 Thu Mar 13 22:51:00 1997  Dawn Perchik  <dawn@cygnus.com>
 787
 788         * utils.c (pollquit, notice_quit): If _WIN32, limit test for
 789         cntl-C to wingdb.
 790         (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
 791         except under wingdb.  (Contributed by Martin Hunt).
 792
 793 Thu Mar 13 12:40:49 1997  Tom Tromey  <tromey@cygnus.com>
 794
 795         * configure: Regenerated.
 796         * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
 797
 798 Thu Mar 13 11:00:22 1997  Doug Evans  <dje@canuck.cygnus.com>
 799
 800         * remote-sim.h (sim_state, SIM_DESC): New types.
 801         (sim_open): Return a `descriptor' as result.
 802         (*): New argument of descriptor result from sim_open.
 803         * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
 804         (gdbsim_open): Record result of sim_open in gdbsim_desc.
 805         Pass argv list to sim_open, argv[0] = pseudo program name.
 806         (*): Pass gdbsim_desc to sim_foo fns.
 807
 808 Wed Mar 12 14:40:06 1997  Tom Tromey  <tromey@cygnus.com>
 809
 810         * config.in: Regenerated.
 811
 812         * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
 813         HAVE_HPUX_THREAD_SUPPORT): Define.
 814
 815 start-sanitize-gdbtk
 816 Wed Mar 12 14:29:52 1997  Tom Tromey  <tromey@cygnus.com>
 817
 818         * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
 819         TCL_ALL_EVENTS.
 820
 821         * configure: Regenerated.
 822         * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
 823         LIBS.
 824
 825 end-sanitize-gdbtk
 826 Tue Mar 11 07:25:27 1997  Mark Alexander  <marka@cygnus.com>
 827
 828         First cut at supporting simulators in gdbserver:
 829
 830         * configure, configure.in: Allow gdbserver to be configured
 831         for cross-target environments.
 832         * gdbserver/Makefile.in: Add simulator support.
 833         * gdbserver/configure.in: Eliminate assumption that host == target.
 834         Simplify using gdb/configure.tgt and gdb/configure.host.
 835         Fix other minor configuration errors.
 836         * gdbserver/low-sparc.c: Fix compile error.
 837         * gdbserver/remote-utils.c: Eliminate assumption that registers
 838         and addresses are four bytes.  Fix minor compile errors and warnings.
 839         * gdbserver/server.c: Rewrite numerous instances of identical code
 840         for starting inferior processes to call new function start_inferior.
 841         Eliminate assumption that registers and addresses are four bytes.
 842         * gdbserver/server.h: Add missing prototypes to eliminate compiler
 843         warnings.
 844         * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
 845         * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
 846         * config/i386/linux.mh: Eliminate gdbserver support as a first step
 847         in moving such support from host to target makefile fragments.
 848         * config/i386/linux.mt: Move gdbserver support here from linux.mh.
 849
 850 Mon Mar 10 12:27:47 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
 851
 852         * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
 853         to insure consistant initialization of unused fields to zero.
 854         * symtab.c: replace initializations of sals with new macro INIT_SAL.
 855         * breakpoint.c: ditto.
 856         * infrun.c: ditto.
 857         * infcmd.c: ditto.
 858         * source.c: add call to INIT_SAL macro.
 859
 860 Sat Mar  8 00:16:37 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 861
 862         * sparc-tdep.c (isbranch):  Always handle v9 branch instructions,
 863         they might get used on 32 bit targets as well.
 864
 865 Wed Mar  5 19:34:09 1997  Bob Manson  <manson@charmed.cygnus.com>
 866
 867         * remote-mips.c (mips_exit_debug): Some IDT boards don't
 868         send the full exit string.
 869
 870 Wed Mar  5 12:59:27 1997  Jeffrey A Law  (law@cygnus.com)
 871
 872         * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
 873         conventions.
 874         (mn10200_store_struct_return): Likewise.
 875
 876 Tue Mar  4 10:31:02 1997  Mark Alexander  <marka@cygnus.com>
 877
 878         * mips-tdep.c (mips_fetch_instruction): New function; replace
 879         common code throughout with calls to it.
 880         (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
 881         correct saved addresses of $s0 and $s1.
 882         (mips_find_saved_regs, mips16_heuristic_proc_desc):  Use MIPS_REGSIZE
 883         instead of hardcoded 4.
 884         (mips16_skip_prologue): Handle extended instructions correctly.
 885
 886 Mon Mar  3 12:29:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 887
 888         * defs.h (LONGEST): Move #ifndef LONGEST to outside.
 889         Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
 890
 891 Thu Feb 27 18:54:11 1997  Mark Alexander  <marka@cygnus.com>
 892
 893         * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
 894         New macros for testing, setting, and clearing bit 0 of addresses.
 895         Change numerous bits of code where bit 0 was being manipulated
 896         to use these macros.
 897
 898 Thu Feb 27 14:12:41 1997  Mark Alexander  <marka@cygnus.com>
 899
 900         * remote-mips.c: Put back the form feeds.
 901
 902 Thu Feb 27 12:04:24 1997  Mark Alexander  <marka@cygnus.com>
 903
 904         * remote-mips.c: Remove form feeds (^L) from source.
 905         (mips_initialize): LSI PMON doesn't support 'set regsize' command.
 906         (pmon_wait): Don't need to exit and re-enter debug mode on LSI
 907         PMON after a continue; it causes target program misbehavior.
 908         (mips_fetch_register): Don't fetch unsupported registers; this
 909         cuts down on wasted serial traffic.
 910
 911 Thu Feb 27 09:38:16 1997  Stu Grossman  (grossman@critters.cygnus.com)
 912
 913         * configure.in configure (HPUX/OSF thread support):  Enable this
 914         only when running GCC, since HP's thread header files use ANSI C
 915         which is not supported by their default compiler.
 916
 917         * configure.host (i[3456]86-*-windows):  Disable long long
 918         support for WinGDB.  Add mswin to configdirs.
 919         * configure.in configure:  Move calls to configure.host and
 920         configure.tgt to the top of configure.in to allow them to set
 921         config variables before they are referenced.
 922
 923 Tue Feb 25 20:21:52 1997  Stan Shebs  <shebs@andros.cygnus.com>
 924
 925         * configure.tgt (mips*-*-lnews*): New target.
 926
 927 Mon Feb 24 16:35:00 1997  Jeffrey A Law  (law@cygnus.com)
 928
 929         * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
 930         if we're not the innermost frame.  Fix minor typos.
 931
 932 Sat Feb 22 03:39:50 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 933
 934         * stabsread.c (read_type):  Fix handling of template names
 935         with template parameters containing `::'.
 936
 937         * valops.c (search_struct_field, search_struct_method):
 938         Pass correct valaddr parameter to baseclass_offset.
 939         Prevent gdb crashes by making sure that the virtual base pointer
 940         from an user object still points to accessible memory.
 941
 942 Tue Feb 18 13:36:34 1997  Mark Alexander  <marka@cygnus.com>
 943
 944         * maint.c: Eliminate -Wall warnings by including some header files.
 945
 946 Tue Feb 18 13:06:30 1997  Mark Alexander  <marka@cygnus.com>
 947
 948         * remote-sim.c (init_callbacks): Undo previous change.
 949
 950 Tue Feb 18 11:13:00 1997  Dawn Perchik  <dawn@cygnus.com>
 951
 952         * maint.c: Fix dereference of pointer.
 953         * remote-sim.c: Fix reference of structure member "last_error".
 954         * debugify.c: Include config.h to get ANSI definitions.
 955
 956 Sat Feb 15 17:43:46 1997  Stu Grossman  (grossman@critters.cygnus.com)
 957
 958         * remote-vx.c (vx_attach): Remove code added by kung.  It made no
 959         sense.
 960
 961 Fri Feb 14 13:00:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 962
 963         * main.c (print_gdb_help): Make static to match declaration.
 964
 965 Thu Feb 13 18:18:18 1997  Dawn Perchik  <dawn@cygnus.com>
 966
 967         * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
 968
 969 Wed Feb 12 15:58:00 1997  Dawn Perchik  <dawn@cygnus.com>
 970
 971         * debugify.c, debugify.h: Make safe for non-ansi compilers.
 972
 973 Wed Feb 12 15:30:00 1997  Dawn Perchik  <dawn@cygnus.com>
 974
 975         * defs.h: Fix prototypes for new cleanup functions.
 976
 977 Wed Feb 12 15:08:47 1997  Dawn Perchik  <dawn@cygnus.com>
 978
 979         * debugify.c, debugify.h: Fix for general gnu use.  Remove C++
 980         comment, add PARAMS, add license info and fix indentation.
 981
 982 Wed Feb 12 14:42:47 1997  Dawn Perchik  <dawn@cygnus.com>
 983
 984         * debugify.c, debugify.h: New files.  Provide common macros
 985         for writing debug info to a log file or stdio.
 986
 987 Wed Feb 12 02:44:39 1997  Dawn Perchik  <dawn@cygnus.com>
 988
 989         * c-valprint.c (c_val_print): Fix printing for arrays defined
 990         with 0 length.
 991
 992 Tue Feb 11 22:24:39 1997  Dawn Perchik  <dawn@cygnus.com>
 993
 994         * defs.h: Fix cntl-C to read from the Windows message queue.
 995         Add prototypes for make_final_cleanup (and the other cleanup
 996         routines.
 997         * remote-e7000.c: Fix sync code to timeout if unable to sync.
 998         Change sync code to report status while trying to sync-up
 999         with hardware.  Add debugging output and document.
1000         * ser-e7kpc.c: Swap order of len & offset to match implementation.
1001         Add debugging output and document.
1002         * serial.c: Add debugging output.
1003         * top.c: Add call to do_final_cleanups.
1004         Remove conditionals preventing Win32 from getting SIGQUIT.
1005         * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
1006         chain as a parameter.  Extract this generic code from the cleanup
1007         routines into separate funtions (*_my_cleanup).  Keep old
1008         functionality by passing "cleanup_chain" to the new funtions.
1009         Define the cleanup chain "final_cleanup_chain" to be a cleanup
1010         chain which will be executed only when gdb exits.  Add functions
1011         (*_final_cleanup) to match the original (*_cleanup) functions.
1012         (pollquit, quit, notice_quit): Fix to read cntl-C from the
1013         Windows message queue.
1014
1015 Tue Feb 11 15:36:31 1997  Doug Evans  <dje@canuck.cygnus.com>
1016
1017         * m32r-rom.c: #include <sys/types.h>.
1018         #ifdef out new load support if wingdb.
1019         * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
1020
1021 Tue Feb 11 12:28:09 1997  Jeffrey A Law  (law@cygnus.com)
1022
1023
1024         * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
1025         * mn10200-tdep.c (mn10200_store_struct_return): New function.
1026
1027         * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
1028         extracting a return value from a register pair.
1029
1030         * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
1031         be two byte aligned.  Round argument sizes up to two byte boundary.
1032         Write out args in two byte hunks.
1033         (mn10200_push_return_address): Implement.
1034         * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
1035         structures > 8 bytes (temporary).
1036         (STORE_RETURN_VALUE): Likewise.
1037         (CALL_DUMMY): No longer undefine.
1038         (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
1039         (REG_STRUCT_HAS_ADDR): Define.
1040
1041 start-sanitize-r5900
1042 Fri Feb 07 09:04:37 1997  Gavin Koch  <gavin@cygnus.com>
1043
1044         * configure.tgt: added r5900.
1045
1046 end-sanitize-r5900
1047 Mon Feb 10 18:35:55 1997  Mark Alexander  <marka@cygnus.com>
1048
1049         * mips-tdep.c (non_heuristic_proc_desc): New function.
1050         (find_proc_desc): Move non-heuristic proc search code into separate
1051         function.
1052         (gdb_print_insn_mips): Use non-heuristic method to find procedure
1053         descriptor, to avoid prologue examination when disassembling.
1054         * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
1055         aka MicroMeteor board).
1056         (mips_exit_debug): Prevent protocol reinitialization if an error
1057         occurs while exiting debug mode.
1058
1059 Mon Feb 10 16:11:57 1997  Jeffrey A Law  (law@cygnus.com)
1060
1061         * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
1062         comments, formatting, etc.  Plus other minor fixes for problems
1063         I found during my first pass over the mn10200 port.
1064         (mn10200_analyze_prologue): New function.
1065         (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
1066         * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
1067         comments, formatting, etc.  Minor fixes for problems I found during
1068         my first pass over the mn10200 port.
1069         (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
1070         pointers.
1071         (REGISTER_VIRTUAL_TYPE): Define as a long.
1072         (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
1073         in register pairs.
1074         (STORE_RETURN_VALUE): Similarly.
1075
1076         * blockframe.c (generic_get_saved_regs): Remove unused variable
1077         "addr".
1078         * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
1079         inside #ifdef CALL_DUMMY.
1080         (watch_command_1): Initialize target_resources_ok.
1081         * command.c (do_setshow_command): Provide dummy initialization
1082         for "match".
1083         * valops.c (find_function_addr): Move function & prototype inside
1084         #ifdef CALL_DUMMY.
1085         (value_arg_coerce): Similarly.
1086         (value_of_variable): Provide dummy initialization of "frame".
1087
1088 start-sanitize-gdbtk
1089 Mon Feb 10 13:50:53 1997  Stu Grossman  (grossman@critters.cygnus.com)
1090
1091         * gdbtk.c (call_wrapper):  Clear running_now if an error occurs.
1092
1093 end-sanitize-gdbtk
1094 Mon Feb 10 07:54:26 1997  Fred Fish  <fnf@cygnus.com>
1095
1096         * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
1097         to prim_record_minimal_symbol_and_info call that was missed in Jan 3
1098         change.
1099         (scan_xcoff_symtab): Ditto.
1100
1101 Sun Feb 09 09:23:26 1997  Mark Alexander  <marka@cygnus.com>
1102
1103         * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
1104         from being sent to 32-bit targets by masking off upper bits.
1105         * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
1106         of PC on 32-bit targets.
1107         (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
1108         frame setup instruction.
1109         (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
1110         (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
1111         prologue instruction.  Fix warnings and bugs found by gcc -Wall.
1112         * buildsym.c (finish_block): Improve handling of overlapping blocks;
1113         fixes problem on MIPS16 printing function arguments.
1114
1115 Sat Feb  8 01:14:43 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1116
1117         * dwarf2read.c (dwarf2_linkage_name):  New function to get
1118         the linkage name of a die from DW_AT_MIPS_linkage_name or
1119         DW_AT_name.
1120         (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
1121         new_symbol):  Use it instead of accessing DW_AT_name.
1122         (read_partial_die):  Use DW_AT_MIPS_linkage name as name of the
1123         partial die if present.
1124         (dwarf2_add_member_fn):  Make a copy of physname on the type obstack.
1125
1126 Fri Feb  7 10:06:22 1997  Jeffrey A Law  (law@cygnus.com)
1127
1128         * blockframe.c (generic_frame_chain_valid): If the new frame
1129         is not INNER_THAN the old frame, then it's not valid.
1130
1131 Tue Feb 04 09:04:37 1997  Mark Alexander  <marka@cygnus.com>
1132
1133         * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
1134         (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
1135
1136 Mon Feb 03 17:57:58 1997  Mark Alexander  <marka@cygnus.com>
1137
1138         * mips-tdep.c (mips16_decode_reg_save): Distinguish between
1139         sd and sw instructions correctly.
1140         (heuristic_proc_start): Add support for MIPS16.
1141         (mips16_get_imm, mips16_heuristic_proc_desc,
1142         mips32_heuristic_proc_desc): New helper functions for
1143         heuristic_proc_desc.
1144         (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
1145         (mips_push_arguments): Don't align small arguments in EABI.
1146         (mips32_skip_prologue): Attempt to shrink code size a little.
1147
1148 Mon Feb  3 11:06:05 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
1149
1150         * m32r-stub.c: New -- remote protocol support for M32R cpu.
1151         * m32r-rom.c:  Several experiments with improved download time.
1152
1153 Fri Jan 31 08:26:39 1997  Mark Alexander  <marka@cygnus.com>
1154
1155         * mips-tdep.c (MIPS16_INSTLEN): Define.
1156         (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
1157         (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
1158         of function on MIPS16.
1159         (mips32_skip_prologue, mips16_skip_prologue): New helper functions
1160         for mips_skip_prologue.
1161         (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
1162
1163 Wed Jan 29 12:45:54 1997  Michael Meissner  <meissner@tiktok.cygnus.com>
1164
1165         * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
1166         ../sim/common/libcommon.a.
1167
1168 Tue Jan 28 15:54:13 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
1169
1170         * blockframe.c: fix a null pointer ref in generic_get_saved_register
1171
1172 Tue Jan 28 15:39:50 1997  Geoffrey Noer  <noer@cygnus.com>
1173
1174         * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
1175         working.
1176
1177 Mon Jan 27 14:31:52 1997  Mark Alexander  <marka@cygnus.com>
1178
1179 First set of changes for mips16:
1180         * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
1181         MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
1182         (ABOUT_TO_RETURN): Call new function mips_about_to_return.
1183         (mips_breakpoint_from_pc, mips_about_to_return): Declare.
1184         * mem-break.c (memory_breakpoint_from_pc): New function.
1185         (memory_insert_breakpoint, memory_remove_breakpoint): Use
1186         memory_breakpoint_from_pc to determine breakpoint contents and size.
1187         * target.h (memory_breakpoint_from_pc): Declare.
1188         * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
1189         to determine size of breakpoint instruction.
1190         * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
1191         New helper functions for mips_find_saved_regs.
1192         (mips_find_saved_regs): Recognize mips16 prologues.
1193         (mips_addr_bits_remove): Strip off upper 32 bits of address
1194         when target CPU is 32 bits but CORE_ADDR is 64 bits.
1195         (mips_step_skips_delay): No branch delay slot on mips16.
1196         (gdb_print_insn_mips): Disassemble mips16 code.
1197         (mips_breakpoint_from_pc, mips_about_to_return): New functions.
1198
1199 Mon Jan 27 10:34:03 1997  Jeffrey A Law  (law@cygnus.com)
1200
1201         * tm-mn10200.h (NUM_REGS): Decrease to 12.
1202         (REGISTER_NAMES): Elimination registers not found on the mn10200.
1203         (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
1204         (LIR_REGNUM, LAR_REGNUM): Delete.  They don't exist on the mn10200.
1205
1206 Sat Jan 25 00:07:59 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1207
1208         * dwarf2read.c:  Replace integral tag, name and form fields in
1209         internal structure definitions with the corresponding enumeration
1210         types from dwarf2.h. Add default cases to switches on enumerations
1211         where appropriate.
1212         Make quoting of string arguments in complaint messages consistent.
1213         Check for NULL returns from DW_STRING.
1214         (struct partial_die_info):  Add sibling and has_type fields, remove
1215         unused value field.
1216         (DW_*):  Move access macro definitions near the definition of the
1217         attribute structure.
1218         (struct field_info):  New structure to pass information about fields
1219         and member functions between die processing routines.
1220         (dwarf2_build_psymtabs_hard):  Set cu_header_offset.
1221         (scan_partial_symbols):  Do not enter DW_TAG_subprogram dies into
1222         the partial symbol table if the DW_AT_*_pc attributes are missing.
1223         Add file scope base type definitions to the partial symbol table.
1224         Skip over child dies if the die has a sibling attribute.
1225         (add_partial_symbol):  Enter global variables with type attributes
1226         and without location descriptors into the partial symbol table.
1227         Store value of DW_TAG_variable dies in the partial symbol table.
1228         Do not enter global variables into the minimal symbol table.
1229         Add base type definitions to the partial symbol table.
1230         (psymtab_to_symtab_1):  Use dwarf2_get_pc_bounds to determine highpc.
1231         (process_die):  Move check for DW_AT_low_pc to read_func_scope.
1232         Add a typedef symbol for base type definitions to the symbol table.
1233         Ignore DW_TAG_inlined_subroutine tags for now.
1234         (read_file_scope):  Use dwarf2_get_pc_bounds to determine pc bounds.
1235         (read_func_scope, read_lexical_block_scope):  Use dwarf2_get_pc_bounds
1236         to determine pc bounds, ignore dies with invalid bounds.
1237         (dwarf2_get_pc_bounds):  New routine to extract and validate the
1238         DW_AT_*_pc attributes of a die.
1239         (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
1240         dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
1241         New functions to handle fields and member functions.
1242         (read_structure_scope):  Rewritten to use them.
1243         (read_array_type):  Renamed from dwarf_read_array_type.
1244         Default upper array bound to describe an array with unspecified
1245         length.
1246         Create array types in backwards order, as dwarf2 puts out the array
1247         dimensions from left to right.
1248         (read_subroutine_type):  Handle DW_TAG_unspecified_parameters,
1249         DW_AT_artificial and DW_AT_prototyped.
1250         (read_base_type):  Make an unsigned type for DW_ATE_boolean.
1251         Pass objfile to dwarf_base_type.
1252         (read_partial_die):  Use read_attribute to read in the attributes.
1253         Handle DW_AT_sibling and DW_AT_type.
1254         Follow references when determining DW_AT_name and DW_AT_external
1255         attributes of the die.
1256         Validate DW_AT_*_pc attributes.
1257         (read_full_die):  Use read_attribute to read in the attributes.
1258         (read_attribute):  New function to read an attribute described
1259         by an abbreviated attribute.
1260         (new_symbol):  Relocate symbol value for DW_TAG_label with baseaddr.
1261         Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
1262         SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
1263         Change symbol class for global variables with a zero valued location
1264         descriptor to LOC_UNRESOLVED.
1265         Handle DW_AT_const_value attributes for DW_TAG_variable,
1266         DW_TAG_formal_parameter and DW_TAG_enumerator.
1267         Build a typedef symbol for DW_TAG_base_type.
1268         (dwarf2_const_value):  New routine to copy a constant value from an
1269         attribute to a symbol.
1270         (dwarf_base_type):  Use passed in objfile, not current_objfile
1271         when calling dwarf2_fundamental_type.
1272         (dump_die):  Use DW_* accessor macros to access values of attributes.
1273         (decode_locdesc):  Handle DW_OP_plus_uconst.
1274
1275 Wed Jan 22 01:31:16 1997  Geoffrey Noer  <noer@cygnus.com>
1276
1277         * mn10200-tdep.c: New file.
1278         * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
1279         SP_REGNUM and FP_REGNUM are different, also no lar or lir.
1280         * config/mn10200/mn10200.mt: New file.
1281         * configure.tgt: add mn10200 entry.
1282
1283 Tue Jan 21 18:32:23 1997  Stu Grossman  (grossman@lisa.cygnus.com)
1284
1285         * configure.in configure:  Check if host has libdl if doing
1286         Solaris threads.
1287
1288 Tue Jan 21 17:03:26 1997  Geoffrey Noer  <noer@cygnus.com>
1289
1290         * mn10300-tdep.c: Wrote/fixed implementations of
1291         mn10300_frame_chain, mn10300_init_extra_frame_info,
1292         mn10300_frame_saved_pc
1293         * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
1294         and INIT_FRAME_PC macros.
1295
1296 Tue Jan 21 17:01:20 1997  Stu Grossman  (grossman@lisa.cygnus.com)
1297
1298         * configure.in configure:  Check if host has libm.  Make sure we
1299         are using gcc when using the -export-dynamic option.  Fixes a
1300         problem with building under Solaris/SunPro cc.
1301
1302 Mon Jan 20 13:52:13 1997  Mark Alexander  <marka@cygnus.com>
1303
1304         * config/mips/{embed,embed64,embedl,embedl64}.mt:
1305         Link in simulator on MIPS embedded targets.
1306
1307 Sat Jan 18 02:31:29 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1308
1309         * blockframe.c (frameless_look_for_prologue):  Mark frames
1310         with a zero PC as frameless to improve backtraces from core dumps
1311         caused by dereferencing a NULL function pointer.
1312
1313 Thu Jan 16 14:10:41 1997  Geoffrey Noer  <noer@cygnus.com>
1314
1315         * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
1316
1317 Tue Jan 14 16:01:06 1997  Geoffrey Noer  <noer@cygnus.com>
1318
1319         * mn10300-tdep.c: made a lot more generic, ripping out code
1320         from copied target (no more mn10300_scan_prologue,
1321         init_extra_frame_info, and mn10300_fix_call_dummy calls)
1322         * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
1323         and INIT_FRAME_PC macros
1324
1325 Thu Jan  9 11:44:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
1326
1327         * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
1328         FP_REGISTER_BYTES to compute offsets into the saved frame,
1329         since it fails for SPARC targets configured without any
1330         FP regs.  Instead, use DUMMY_STACK_REG_BUF_SIZE.
1331
1332 Mon Jan  6 11:15:14 1997  Stu Grossman  (grossman@critters.cygnus.com)
1333
1334         * symtab.c (fixup_symbol_section):  Handle NULL symbols without
1335         crashing.
1336
1337 Fri Jan  3 12:08:16 1997  Stu Grossman  (grossman@critters.cygnus.com)
1338
1339         * Makefile.in configure configure.in:  Remove ENABLE_CLIBS,
1340         ENABLE_OBS, and THREAD_DB_OBS.  These are consolidated into LIBS
1341         and CONFIG_OBS.
1342         * configure configure.in:  Clean up test cases around thread support.
1343 start-sanitize-v850
1344         * configure.tgt (v850-*-*):  Include v850ice.o and v850.lib if
1345         host is Windows.
1346 end-sanitize-v850
1347         * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
1348         printcmd.c valops.c value.h values.c:  Add bfd_section arg to
1349         value_at and value_at_lazy.
1350         * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
1351         Add bfd_section arg to prim_record_minimal_symbol_and_info.
1352         * corefile.c gdbcore.h printcmd.c valops.c:  Use read_memory_section
1353         instead of read_memory.  It takes a bfd_section arg.
1354         * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h:  Remove
1355         unnecessary cast for assignment of struct dbx_symfile_info.
1356         Struct objfile now uses a real pointer instead of PTR for this
1357         element.
1358         * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
1359         text, data and bss into dbx_symfile_info.
1360         * exec.c (xfer_memory):  Handle transfers for user-specified
1361         sections.
1362         * findvar.c (read_var_value locate_var_value):  Copy bfd section
1363         from the symbol to the value.
1364         * gdb-stabs.h:  Add section pointers for text, data and bss
1365         sections.
1366         * maint.c (translate address command):  Add test code for overlay
1367         address translation.
1368         * printcmd.c (do_examine do_one_display):  Now takes a bfd section
1369         arg.
1370         * (print_formatted x_command):  Record current section along with
1371         current address for repeated commands.
1372         * sparc-nat.c (fetch_inferior_registers):  Change
1373         target_xfer_memory to target_{read write}_memory to allow changes
1374         to target_xfer_memory interface for section info.
1375         * symmisc.c (dump_msymbols print_symbol):  Print section
1376         assocaited with symbol.
1377         * symtab.c (fixup_symbol_section):  New routine to
1378         add section info to symbols returned by lookup_symbol.
1379         * symtab.h (struct general_symbol_info):  Add bfd section to
1380         symbols.
1381         * target.c target.h (target_xfer_memory):  Add bfd section to
1382         args.
1383         * (target_read_memory_section):  New routine to read data from a
1384         specific section.
1385         * (target_memory_bfd_section):  New global variable to pass bfd
1386         section in to targets.
1387         * valarith.c (value_add value_addr value_array):  Preserve bfd
1388         section when computing new value.
1389         * value.h (struct value):  Add bfd section to values.
1390         * values.c (allocate_value value_copy):  Initialize/preserve bfd
1391         section.
1392         * (unpack_double):  Clean up _MSC_VER conditionals to remove
1393         duplicate code.
1394 start-sanitize-v850
1395         * v850ice.c:  New module to support communication with NEC's
1396         PC-based ICE.
1397         * config/v850/tm-v850.h (REGISTER_NAMES):  Replace sp, gp, fp, and
1398         ep names with rxx names.  sp and fp are renamed via a different
1399         mechanism.
1400 end-sanitize-v850
1401
1402 Fri Jan  3 14:20:05 1997  Geoffrey Noer  <noer@cygnus.com>
1403
1404         * mn10300-tdep.c (mn10300_push_arguments): rewrote,
1405         also removed code elsewhere that made use of RP_REGNUM.
1406         * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
1407         ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
1408         arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
1409         EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
1410
1411 For older changes see ChangeLog-96
1412 \f
1413 Local Variables:
1414 mode: indented-text
1415 left-margin: 8
1416 fill-column: 74
1417 version-control: never
1418 End: