1 2000-03-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3 * defs.h (struct continuation_arg): Change type of field 'data'
6 * event-loop.h: Eliminate uses of PTR, use 'void *' instead.
10 Fri Mar 3 15:39:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
12 * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
14 (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
15 SUBDIR_GDBTK_ALL): Define.
16 (all-gdbtk, clean-gdbtk): New targets.
17 (all): Add CONFIG_ALL as dependency.
18 (clean): Add CONFIG_CLEAN as dependency.
20 * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
21 (LN_S): Define. Delete GDBtk's link code.
23 Fri Mar 3 13:12:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
25 * configure.in (ENABLE_GDBTK): Delete variable.
26 (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
27 * Makefile.in: Update.
28 * configure: Regenerate
30 2000-03-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
32 * config/alpha/alpha-linux.mh: Remove core-regset.o fron the
35 2000-03-02 Mark Kettenis <kettenis@gnu.org>
37 * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
38 Override definitions to include the normal FPU registers.
39 (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
40 REGISTER_CONVERT_TO_RAW): Removed. The default definitions are
42 (i387_to_double, double_to_i387): Remove prototypes.
44 2000-03-02 Kevin Buettner <kevinb@redhat.com>
46 * findvar.c (extract_floating, store_floating): Use target
47 floating point type sizes rather host sizes to determine
48 which conversion needs to be done.
50 2000-03-02 Nick Duffek <nsd@cygnus.com>
52 * uw-thread.c: Apply GNU conventions to comment formatting.
53 (deactivate_uw_thread): Call remove_thread_event_breakpoints().
54 (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
55 call to deactivate_uw_thread().
57 Thu Mar 2 09:04:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
59 * MAINTAINERS: Daniel Berlin is C++ maintainer.
61 Thu Mar 2 08:55:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
63 * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
64 a joint GNU/Linux/x86 maintainer. Nick Duffeck and Robert Lipe
65 share SCO/Unixware. Nick Duffek and Peter Schauer share
68 Wed Mar 1 22:12:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
70 From Wed 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
71 * remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
72 * remote-rdi.c (arm_rdi_close): Ditto.
74 Wed Mar 1 19:31:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
76 * CONTRIBUTE (configure.in): Note that patches to configure are
79 2000-03-01 Mark Kettenis <kettenis@gnu.org>
81 * MAINTAINERS: Correct my own mail address.
83 Wed Mar 1 11:26:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
85 * MAINTAINERS: Document people with paperwork pending.
87 Wed Mar 1 00:49:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
89 From 2000-02-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
90 Make NEW_PROC_ABI interface functional on Solaris x86.
91 * sol-thread.c (ps_lgetLDT): Rewrite to use new
92 procfs_find_LDT_entry function from procfs.c, mostly copied from
94 * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
97 Wed Mar 1 00:34:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
99 From 2000-02-26 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
100 * config/i386/tm-i386sol2.h (MERGEPID): Define.
102 Wed Mar 1 00:06:19 2000 Andrew Cagney <cagney@b1.cygnus.com>
104 From 1999-08-13 J.T. Conklin <jtc@redback.com>:
105 * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
106 FRAME_FIND_SAVED_REGS.
107 (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
108 * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
111 Tue Feb 29 23:56:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
113 From 2000-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
114 * objfiles.c (open_mapped_file): Fix obsolete references to `mapped'
117 Tue Feb 29 18:47:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
119 From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
120 * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
121 (top level): Add prototypes for go32_* functions.
122 * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
123 (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
124 Override definitions from tm-i386.h.
125 (REGISTER_VIRTUAL_TYPE): Remove macro definition.
126 * i386-tdep.c (i386_extract_return_value)
127 [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
128 to the list of targets which return FP values in FP registers.
130 * i386-tdep.c (i386_extract_return_value): Add FIXME recommending
131 that this function be re-implemented using multi-arch.
133 Tue Feb 29 18:40:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
135 From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
136 * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
138 * ser-go32.c: Include string.h, for prototype of strncasecmp.
139 (dpmi_regs, dpmi_sregs): Remove unused variables.
140 (dos_flush_input): Return a value, to prevent compiler warning.
141 * expprint.c (dump_prefix_expression): Use %ld in format and cast
142 sizeof(union exp_element) to long, to prevent GCC from complaining
143 about format/argument mismatch.
144 (dump_postfix_expression): Likewise.
146 Tue Feb 29 18:09:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
148 * arm-tdep.c: Include <ctype.h>.
150 Tue Feb 29 17:33:49 2000 Andrew Cagney <cagney@b1.cygnus.com>
152 From Wed, 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
153 * stack.c (backtrace_command_1), infrun.c (normal_stop): Check
154 that the target's stack was valid.
156 Tue Feb 29 15:14:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
158 From 2000-02-22 Stephane Carrez <stcarrez@worldnet.fr>:
159 * dwarf2read.c (read_address): Read 16-bits addresses.
161 2000-02-28 Scott Bambrough <scottb@netwinder.org>
163 * arm-linux-nat.c (fetch_nw_fpe_*):
164 Renamed to fetch_nwfpe_* to use the same naming convention
165 as in the Linux kernel. Modified prototype to get rid of
167 (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
168 naming convention as in the Linux kernel. Fixed calls to
170 (store_fpregs): Fixed calls to store_nwfpe_*. Removed
173 Mon Feb 28 18:24:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
175 * MAINTAINERS: Transfer d30v maintainership to David Taylor.
177 2000-02-28 Christopher Faylor <cgf@cygnus.com>
179 * win32-nat.c: Remove unneeded header.
182 Mon Feb 28 13:34:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
184 * wince.c: Include "gdb_wait.h" and not "wait.h".
186 Mon Feb 28 10:58:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
188 * MAINTAINERS: Mention mmalloc. Expand Host/Native and
189 Target/Architecture maintainers descriptions.
191 2000-02-26 Mark Kettenis <kettenis@gnu.org>
193 * gnu-nat.c: Include "gdbthread.h". Include <hurd.h>.
194 Reorder headers a bit. Overall cleanup and minor reformatting.
195 (MIG_SERVER_DIED): Remove define.
196 (proc_update_sc): Add braces to silence compiler warning.
197 (proc_steal_exc_port): Initialize err to zero.
198 (make_proc): Add braces to silence compiler warning.
199 (inf_validate_task_sc): Add cast to silence compiler warning.
200 (inf_set_traced): Reorganize a bit to silence compiler warning.
201 (inf_validate_procs): Use mach_msg_type_number_t for all thread
202 numbers and add braces to silence compiler warning.
203 (gnu_wait): Add prototypes for server functions and add braces to
204 silence compiler warnings.
205 (S_exception_raise_request): Pass subcode to inf_debug call.
206 (gnu_write_inferior): Remove unused variable `protection_changed'.
207 (gnu_xfer_memory): Remove unused variable `result'.
208 (set_sig_thread_cmd): Remove unused varible `tid'.
209 (set_signals_cmd): Remve unused variable `trace'.
210 (add_task_commands): Provide complete prototype. Reformat help
211 strings a bit to make sure the first line is a full sentence.
212 Call info_port_rights_cmd instead of info_send_rights_cmd for the
213 "info port-rights" command.
214 (add_thread_commands): Provide complete prototype. Make static.
215 Reformat help strings a bit to make sure the first line is a full
217 (_initialize_gnu_nat): Provide complete prototype.
219 2000-02-26 Mark Kettenis <kettenis@gnu.org>
221 Make cross-compilation for the Hurd more friendly.
222 From Jeff Bailey <jbailey@gnu.org>:
223 * configure.in: Use AC_CHECK_TOOL to find MiG.
224 * Makefile.in (MIG): New variable.
225 * config/i386/i386gnu.mh (MIG): Remove.
226 * configure: Regenerated.
228 2000-02-26 Kevin Buettner <kevinb@redhat.com>
230 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
231 comment explaining motivation behind this function and why
232 the generic facilities won't work for this platform.
233 * rs6000-tdep.c (skip_prologue): Always test to make sure
234 that an instruction is read successfully from the target's
235 memory. Introduce notion of instructions which may appear in
236 the prologue, but may not end the prologue. Added explicit
237 check for nop instruction. Use memset() to zero the frame
238 data instead of assignment from a statically allocated,
239 uninitialized structure.
241 Sat Feb 26 17:15:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
243 * MAINTAINERS: Chris Faylor is responsible for all MS Windows
244 systems. Note that Jim Blandy as maintainer for ``tracing
247 2000-02-25 Fernando Nasser <fnasser@cygnus.com>
249 From: Thomas Zenker <thz@Lennartz-electronic.DE>
250 * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
251 NetBSD...) sys_errlist should not be declared in hsys.c.
252 NEED_SYSERRLIST is set already by configure, so we can use it.
253 * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
254 posix compliant and we should not work with the old compatibility
255 stuff. Because of that I undef BSD in case of FBSD etc and include
256 sys/ioctl to get the flags.
257 * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
260 2000-02-24 Kevin Buettner <kevinb@redhat.com>
262 * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
263 of return structure in r3 if necessary.
264 (ppc_linux_memory_remove_breakpoints): New function.
265 * rs6000-tdep.c (skip_prologue): Make sure that the cases
266 for storing either cr or lr to the stack only handle those
267 cases. (I.e, don't let these cases match 0x00000000 which is
268 found found in the shared library trampoline prior to the
269 loading of the shared library.)
270 * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
272 (MEMORY_REMOVE_BREAKPOINT): Define.
274 Wed Feb 23 23:27:48 2000 Andrew Cagney <cagney@behemoth.cygnus.com>
276 * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
278 Thu Feb 24 18:42:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
280 * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
281 $(SUBDIR_*_INSTALL) when so configured.
282 * configure: Regenerate.
284 * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
286 (install-only): Add dependency on $(CONFIG_INSTALL). Delete code
288 (uninstall): Add dependency on $(CONFIG_UNINSTALL).
289 (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
290 SUBDIR_GDBTK_INSTALL): Define.
291 (install-gdbtk): New target.
293 Thu Feb 24 18:19:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
295 * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
296 * configure: Regenerate.
298 2000-02-24 Christopher Faylor <cgf@cygnus.com>
300 * configure.tgt: Add arm, mips, sh wince targets.
301 * config/arm/tm-wince.h: New file.
302 * config/arm/wince.mt: New file.
303 * config/sh/tm-wince.h: New file.
304 * config/sh/wince.mt: New file.
305 * config/mips/tm-wince.h: New file.
306 * config/mips/wince.mt: New file.
308 * wince-stub.c: New file.
309 * wince-stub.h: New file.
310 * sh-tdep.c: Use correct register names for Windows CE.
312 Wed Feb 23 19:01:45 EST 2000 Nicholas Duffek <nsd@cygnus.com>
314 * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
315 (error_return, quit_return): Merge into catch_return pointer.
316 (return_to_top_level): Update comment. Longjmp to *catch_errors,
317 and communicate reason to catch_errors via setjmp return value.
318 (catch_errors): Always catch both quit and error, and if a catch
319 wasn't requested by caller, throw it to the next catch_error.
320 Replace dual longjmp buffer memcpy with single pointer change.
321 Add FIXME for possibly adding new interface to tell caller what
322 event was caught. Add extensive comments.
323 * defs.h (enum return_reason): Reserve 0 for use as initial
324 setjmp() return value.
325 (RETURN_MASK): New public macro to generate RETURN_MASK_* from
327 (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
329 2000-02-23 Fernando Nasser <fnasser@cygnus.com>
331 * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
332 * valops.c (_initialize_valops): Add command "set unwindonsignal".
333 (hand_function_call): Test for unwind_on_signal and act accordingly.
335 Wed Feb 23 12:58:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
337 * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
338 Match ../include/dis-asm.h change.
339 * gdbarch.h: Regenerate.
340 * corefile.c (dis_asm_read_memory): Update.
342 Mon Feb 21 13:57:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
344 * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
345 (ENABLE_CFLAGS): Move initialization to start of file.
346 (enable-gdbmi): Add new configure option --enable-gdbmi. When
347 selected and an ${srcdir}/mi directory is present enable MI
350 * configure: Regenerate.
352 * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
353 SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
354 (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
355 CONFIG_LDFLAGS): New macros. Initialized by autoconf via
357 (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
358 INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
360 * mi: New directory. MI interface to GDB.
362 * defs.h (interpreter_p): Declare when UI_OUT.
363 * top.c (gdb_init): When interpreter_p, check that the interpreter
364 was recognized by one of the linked in interpreters.
365 * main.c (interpreter_p): Define.
366 (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
367 * event-top.c (display_gdb_prompt): When interpreter_p, assume
368 interpreter displays prompt.
370 * breakpoint.c (print_it_typical, watchpoint_check,
371 print_one_breakpoint, mention): When MI include additional
372 target status information.
373 * infrun.c (print_stop_reason, normal_stop): Ditto.
375 2000-02-22 Jim Blandy <jimb@redhat.com>
377 * gdbarch.sh: Make the `default' field really default to zero, as
380 Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
381 * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
383 (default_coerce_float_to_double, standard_coerce_float_to_double):
385 (value_arg_coerce): Adjust for new definition.
386 * value.h (default_coerce_float_to_double,
387 standard_coerce_float_to_double): New declarations for the above.
388 * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
389 * gdbarch.c, gdbarch.h: Regenerated.
390 * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
391 tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
393 * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
395 (mips_gdbarch_init): Install that as our coerce_float_to_double
398 2000-02-22 Kevin Buettner <kevinb@redhat.com>
400 * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
402 * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
405 * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
406 where the next frame is a signal handler caller.
408 * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
410 (tm-linux.h): Include.
411 (tm-sysv4.h): Don't include (directly). config/tm-linux.h will
412 include this file for us.
413 (REALTIME_LO, REALTIME_HI): Don't define. These are defined by
414 config/tm-linux.h for us.
415 (SOFUN_ADDRESS_MAYBE_MISSING): Define.
417 2000-02-21 Kevin Buettner <kevinb@redhat.com>
419 * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
420 (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
421 * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
424 * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
425 config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
426 * config/powerpc/xm-linux.h: Substantially revised for native
428 * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
429 (NATDEPFILES): Update list to reflect the fact that we can
432 * rs6000-tdep.c, config/rs6000/tm-rs6000.h
433 (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
434 Renamed; The former names were lacking the rs6000_ prefix.
435 * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
436 instead of rs6000_frame_chain.
437 (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
438 of rs6000_frameless_function_invocation.
440 2000-02-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
442 From Philippe De Muyter <phdm@macqel.be>
444 * event-loop.c (handle_file_event): In case of poll, enable
445 printing of informational message if an error/exception is
446 detected on the file descriptor.
448 2000-02-21 Jim Kingdon <kingdon@redhat.com>
450 * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
452 Mon Feb 21 12:50:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
454 * buildsym.c: Include "language.h" and "expression.h" for
455 longest_local_hex_string_custom.
457 Mon Feb 21 11:17:18 2000 Andrew Cagney <cagney@b1.cygnus.com>
459 * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
460 * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
461 Cagney <cagney@b1.cygnus.com>.
463 Mon Feb 21 11:03:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
465 * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
466 nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
467 Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
468 to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
469 Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
471 * MAINTAINERS: Add Nick Clifton to write after approval list.
473 Mon Feb 21 10:30:39 2000 Andrew Cagney <cagney@b1.cygnus.com>
475 * MAINTAINERS: Add note on multiple maintainers.
477 2000-02-19 Philippe De Muyter <phdm@macqel.be>
479 * cli-out.c (cli_table_header): Type of parameter `alignment' is
480 `enum ui_align', not `int'.
481 (cli_field_string, cli_field_skip): Likewise.
483 2000-02-18 Jim Blandy <jimb@redhat.com>
485 From Jimmy Guo <guo@cup.hp.com>:
486 * buildsym.h (add_free_pendings): Declare.
487 * buildsym.c (add_free_pendings): New function.
488 (make_blockvector): 32x64 fix using longest_local_hex_string().
489 (start_subfile): initialize variable 'subfile'.
491 2000-02-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
493 * remote.c (remote_async_detach): Use target_mourn_inferior(), to
494 make sure that all is cleaned up after we disconnect from the
496 (remote_detach): Ditto.
498 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
500 From Rodney Brown <RodneyBrown@pmsc.com>
501 * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
502 potentially harming mistake.
504 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
506 * arm-tdep.c: Use header file instead of extern declarations for
507 the {get,set}_arm_regname* functions.
509 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
511 * configure.in: Replaces obsolete gdbtk-variable.c with
513 * configure: Regenerate.
514 * Makefile.in: Remove obsolete/extraneous references to
517 2000-02-16 Mark Kettenis <kettenis@gnu.org>
519 * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
520 the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
521 33 by definition, whereas REALTIME_LO might be 32 on systems that
522 have SIG32 such as Linux. Make sure that the signal number
523 returned is within the range specified by REALTIME_LO and
526 2000-02-16 Mark Kettenis <kettenis@gnu.org>
528 * configure: Regenerated.
530 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
532 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
533 _initialize_arm_tdep): Allows the user to choose between any of
534 the flavors available for the disassembly to be used in the "info
535 reg" command and elsewhere in gdb. It prevents having to maintain
536 this information in two places by using the data kept in the
539 2000-02-09 Mark Kettenis <kettenis@gnu.org>
541 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
542 prfpregset_t in <sys/procfs.h>.
543 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
545 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
546 prgregset_t and prfpregset_t if they are not already present.
548 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
550 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
551 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
553 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
555 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
558 2000-02-15 Kevin Buettner <kevinb@redhat.com>
561 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
562 to correct value for generic dummy frames. When using
563 generic dummy frames, don't attempt to write TOC value or
564 function to call into the call dummy.
565 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
566 code to also handle the PowerOpen ABI.
567 (ppc_push_return_address): Enable for all ports.
568 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
569 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
570 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
571 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
572 provided by generic RS6000 definitions so that call dummies
573 are implemented using generic dummy frames instead.
575 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
576 prior to changing the stack pointer via ptrace(). Also, ignore
577 attempts to store to undefined registers that are less than
580 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
581 frame from 436 to 448 to account for alignment padding.
582 (rs6000_push_arguments): Obtain actual register size instead
583 of assuming the register is 4 bytes long. [There's still
584 more work to be done to totally remove the 4 byte assumption,
585 however.] Make sure the stack is 16 byte aligned as required
586 by the PowerOpen ABI. Also, make sure that small structures
587 passed in registers are properly aligned within the register.
589 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
591 Patch applied by Kevin Buettner <kevinb@redhat.com>
593 * rs6000-tdep.c (skip_prologue): skip copying of argument
594 registers to local variable registers.
596 2000-02-14 Jim Kingdon <kingdon@redhat.com>
598 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
599 sym->section->index number is not a SECT_OFF_* code.
601 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
603 * MAINTAINERS (write after approval): Add H.J. Lu.
605 2000-02-14 Nick Clifton <nickc@cygnus.com>
607 * sh-tdep.c: Remove extraneous code.
609 2000-02-14 Amit S. Kale <akale@veritas.com>
611 * elfread.c (elf_symtab_read): Move the use of sym to after where
613 Checked in by Jim Kingdon <kingdon@redhat.com>
615 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
617 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
619 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
621 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
622 * dwarf2read.c: (die_is_declaration): New fn.
623 (read_structure_scope): Use it.
625 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
627 2000-02-10 J.T. Conklin <jtc@redback.com>
629 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
630 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
632 * gdbserver/low-nbsd.c: New file.
634 * gdbserver/Makefile.in: convert to autoconf.
635 * gdbserver/configure.in: likewise.
636 * gdbserver/configure: generate.
638 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
640 * CONTRIBUTE: New file. How to contribute to GDB.
642 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
644 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
645 Buettner to powerpc maintainers. Make Kevin Buettner the
646 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
647 and Jason Molenda to write after aproval list.
649 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
651 * MAINTAINERS: Reformat. Separate into check-in categories.
653 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
655 * uw-thread.c: Remove __FUNCTION__ GNUism.
657 2000-01-17 Amit S. Kale <akale@veritas.com>
659 * elfread.c (elf_symtab_read): Use offset for the section in which a
660 symbol resides, instead of .text section for calculating address of a
662 Checked in by Jim Kingdon <kingdon@redhat.com>
664 2000-02-10 Mark Kettenis <kettenis@gnu.org>
666 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
667 no longer necessary now we have gdb_wait.h.
669 2000-02-09 Mark Kettenis <kettenis@gnu.org>
671 * gnu-nat.c (proc_string): Make global.
672 (do_mach_notify_dead_name): Suppress dead name notifications if we
673 know that the task is dead.
675 1999-12-13 Mark Kettenis <kettenis@gnu.org>
677 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
678 instead of directly from the kernel. Add some hackery to make
679 sure that the info isn't influenced by suspension of the task in
680 the proc server itself.
682 2000-02-10 Jim Kingdon <kingdon@redhat.com>
684 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
685 approved by Michael Snyder.
687 2000-02-09 Mark Kettenis <kettenis@gnu.org>
689 * linux-thread.c: Include defs.h before gdb_wait.h.
691 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
693 * Makefile.in (wait_h): Delete macro. Update all dependencies
694 specifying gdb_wait.h instead.
696 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
697 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
698 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
699 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
700 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
701 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
702 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
703 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
704 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
705 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
707 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
709 * gdb_wait.h: New file. Based on ../include/wait.h. Include
710 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
712 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
714 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
715 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
716 (d10v_stack_align): Declare.
717 * d10v-tdep.c (d10v_stack_align): Define.
719 1999-08-23 J.T. Conklin <jtc@redback.com>
721 * top.c (remote_timeout): Change default to 2. Add comment
722 explaining history of changes to the default value.
723 * remote.c (_initialize_remote): Remove code that adds set/
724 show remotetimeout, as that's also done in top.c
726 1999-10-18 J.T. Conklin <jtc@redback.com>
728 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
729 Return E01 instead of P01 when 'P' command fails.
731 2000-02-05 J.T. Conklin <jtc@redback.com>
733 * remote.c (putpkt_binary): Handle NAK from target stub.
735 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
737 * configure.in: Remove the addition of sol-thread.c to the
738 CONFIG_INITS list. This caused problems with init.c, because
739 sol-thread.c would be grepped twice for _initialize_* functions.
741 * Makefile.in: Add FIXME for init.c.
743 2000-02-07 Jim Kingdon <kingdon@redhat.com>
745 Clean up compiler warnings:
746 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
747 stack.c, valprint.c: Change variables to unsigned.
748 * bcache.c: Rearrange to avoid warnings about variables not being set.
749 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
750 rather than declaring print_max and repeat_count_threashold
751 ourselves (incorrectly).
752 * valprint.h: Do declare repeat_count_threashold.
753 * ch-exp.c: Use default case for internal error.
754 * findvar.c: Don't omit argument type.
755 * symtab.c: Remove unused variable.
757 2000-02-04 Jim Blandy <jimb@redhat.com>
759 * c-typeprint.c (remove_qualifiers): New function.
760 (c_type_print_base): Use it to remove qualifiers from C++
761 qualified names, not strrchr.
763 * c-typeprint.c (c_type_print_base): Recognize type conversion
764 operators by calling is_type_conversion_operator.
765 (is_type_conversion_operator): New function.
767 2000-02-04 Nick Clifton <nickc@cygnus.com>
769 * config/arm/tm-arm.h (LOWEST_PC): Define.
771 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
773 * infrun.c (resume): Make just one call to target_resume(), instead
774 of four: set up correct parameters in all the cases ahead of time,
775 and do call at the end.
777 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
779 * config/powerpc/tm-ppc-eabi.h: Define
780 SOFUN_ADDRESS_MAYBE_MISSING.
782 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
784 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
787 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
789 * Makefile.in (INIT_FILES): Append CONFIG_INITS
790 * configure.in (CONFIG_INIT): Initialize.
791 (links): Link srcdir/gdbtk/library to gdbtcl2.
792 * gdbtcl2: Moved to gdbtk/library.
793 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
794 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
795 gdbtk.h: Moved to gdbtk/generic.
797 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
799 * printcmd.c (build_address_symbolic): New function. Returns all
800 the parts that are necessary to print an address in a symbolic
802 (print_address_symbolic): Split into a printing part and an
803 information building part, build_address_symbolic().
805 * defs.h (build_address_symbolic): Export.
807 2000-02-03 Jim Blandy <jimb@redhat.com>
809 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
812 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
814 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
815 arguments on dummy frames.
817 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
819 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
820 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
822 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
824 * remote.c (getpkt_sane): New function. It is the old getpkt(),
825 which now returns a timeout indication.
826 (getpkt): New function. Wrapper for getpkt_sane(), so that return
827 value can still be ignored.
829 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
831 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
834 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
836 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
837 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
840 * Makefile.in: Update.
842 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
843 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
844 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
845 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
846 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
847 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
848 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
849 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
850 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
851 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
852 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
853 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
854 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
855 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
856 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
857 config/pa/tm-hppa.h: Update.
858 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
860 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
862 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
863 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
864 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
865 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
866 config/m88k/delta88v4.mh, config/mips/irix4.mh,
867 config/mips/irix5.mh, config/mips/mipsv4.mh,
868 config/powerpc/solaris.mh (NATDEPFILES): Change references to
869 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
870 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
872 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
874 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
876 * main.c (captured_main): Only use the legacy tui_file code when
877 linking in older code such as the TUI.
879 * gdb-file.h, gdb-file.c: New files.
880 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
881 null_file_isatty, null_file_rewind, null_file_put,
882 null_file_flush, null_file_write, null_file_fputs,
883 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
884 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
885 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
886 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
887 set_gdb_file_data, struct accumulated_gdb_file,
888 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
889 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
890 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
891 stdio_file_delete, stdio_file_flush, stdio_file_write,
892 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
893 Moved to gdb-file.h and gdb-file.c.
894 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
895 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
896 tui_file_rewind, tui_file_put, tui_file_fputs,
897 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
898 fputs_unfiltered_hook):
899 Moved to tui/tui-file.c and tui/tui-file.h.
901 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
902 (tui-file.o, gdb-file.o): Add dependencies.
903 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
904 * main.c: #include tui/tui-file.h.
906 2000-01-28 Fred Fish <fnf@cygnus.com>
908 * findvar.c (value_from_register): Special case handling of D10V
909 pointer values fetched from registers.
911 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
913 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
914 support for new style thumb prologues.
916 2000-01-28 Nick Clifton <nickc@redhat.com>
918 * arm-tdep.c: Remove extraneous dash at start of strings
919 introduced in previous delta.
921 2000-01-27 Nick Clifton <nickc@redhat.com>
923 * arm-tdep.c: Replace uses of arm_toggle_renames() with
924 parse_arm_disassembler_option().
926 2000-01-27 Jim Blandy <jimb@cygnus.com>
928 * symtab.c (decode_line_1): Don't let commas that are within
929 quotes or parenthesis terminate the line spec. Don't use pp when
930 removing the final double quote of a double-quoted string. Don't
931 forget to skip the opening double quote. I have no clue whether
932 this change is correct; probably we've just moved this function
933 from one buggy place to another buggy place, and never came within
934 an outhouse whiff of correctness.
935 (find_toplevel_char): New function.
937 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
939 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
940 passing the pointer to a thumb function as an argument.
942 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
944 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
945 are reinserted for another run.
947 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
949 * cli-out.c (cli_filed_string): Test for NULL string.
951 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
953 * infcmd.c (run_stack_dummy): Account for a random signal stopping
954 the inferior as well as breakpoints being hit while performing an
955 inferior function call.
956 * valops.c (hand_function_call): Ditto.
958 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
960 From Mark Kettenis <kettenis@gnu.org>
962 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
963 i386_REGS_SEGS_STATE.
964 (HAVE_I387_REGS): Define.
965 (FLOAT_INFO): Remove.
966 * i386gnu-nat.c: Almost completely rewritten to use new i386
967 register layout and `float info' implementation.
968 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
969 Move prototypes from here.
970 * gnu-nat.h: To here.
972 2000-01-24 Kevin Buettner <kevinb@redhat.com>
974 * utils.c (get_field, put_field): Fix buffer underruns and
975 overruns. Also, handle case where total_len is not evenly
977 (getfield): Make sure zeroing of unwanted bits occurs even
978 when bit field to extract does not straddle two or more
981 2000-01-23 Christopher Faylor <cgf@cygnus.com>
983 * defs.h: Add gdb_thread_select declaration.
985 2000-01-23 Kevin Buettner <kevinb@redhat.com>
987 * linux-thread.c (_initialize_linuxthreads): Make sure that
988 linuxthreads_block_mask does not block SIGCHLD.
990 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
992 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
993 text so that new lines work properly.
995 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
997 * proc-utils.h: New file. Export functions from proc-*.c.
999 * proc_api.c: Rename to:
1000 * proc-api.c: New file. Add include of proc-utils.h.
1002 * proc_events.c: Rename to:
1003 * proc-events.c: New file.
1005 * proc_flags.c: Rename to:
1006 * proc-flags.c: New file.
1008 * proc_why.c: Rename to:
1009 * proc-why.c: New file. Add include of proc-utils.h.
1011 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
1012 ctype.h, proc-utils.h.
1013 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
1014 (open_procinfo_files): Conditionalize local variable tmp, to avoid
1016 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
1018 (procfs_wait): Adjust format in some printf_filetered calls to
1019 avoid compiler warnings.
1020 (make_signal_thread_runnable): Ifdef 0. The calls to this function
1021 are also ifdef'd 0 .
1022 (procfs_resume): Add parentheses around '&&' operation.
1023 (procfs_set_exec_trap): Remove unused variable.
1024 (info_proc_cmd): Add braces to avoid ambiguous else clause.
1026 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
1027 proc-why.o): Update dependencies.
1029 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
1032 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
1034 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
1035 Fix from Robert Lipe <robertl@sco.com>.
1036 * configure: Regenerated.
1038 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1040 * stack.c (print_frame_info_base): Break up into the frame info
1041 (location) printing part and the rest (source line printing).
1042 (print_frame): New function. Take care of printing the location
1046 * infrun.c (normal_stop): Use enum values rather than integers for the
1047 source_flag to be passed to show_and_print_stack_frame().
1050 * frame.h (print_what): New enum for 'source' argument to
1051 print_frame_info_base(). Use this instead of obscure numbers.
1054 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
1056 * event-top.c (stdin_event_handler): call quit_command rather than
1057 exit -- run cleanups, give target code a chance to say goodbye to
1058 the target. Fixes bug where the inferior processes were left
1059 around on Solaris (and probably elsewhere) by the testsuite.
1061 2000-01-14 Mark Salter <msalter@cygnus.com>
1063 * v850-tdep.c (v850_target_architecture_hook): Setup correct
1064 machine id for disassembly.
1066 2000-01-13 Jim Blandy <jimb@cygnus.com>
1068 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
1069 convert_to_regset, when regno indicates a specific register.
1071 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
1073 * uw-thread.c: Document libthread.so debugging interface. Minor
1074 comment and formatting tweaks.
1075 (DEBUG): #define as 0 instead of 1.
1076 (CALL_BASE): Include function name in error msg.
1077 (libthread_stub): Adjust inferior_pid after thread exit.
1078 (uw_thread_create_inferior): Deactivate uw_thread_ops before
1079 asking procfs_ops to create inferior.
1080 (libthread_init): Don't return nonlocally on error.
1082 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
1084 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
1087 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
1089 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
1090 both sides are on the same state.
1092 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
1094 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
1095 115200 (minor syntax mistake).
1097 2000-01-12 Jim Blandy <jimb@cygnus.com>
1099 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
1100 this here, to go along with the definitions of PIDGET and TIDGET.
1102 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1104 * thread.c (do_captured_thread_select): New function. Switch
1105 current thread, safely from within catch_errors().
1106 (gdb_thread_select): New function. Switch threads safely.
1107 (thread_command): Use gdb_thread_select().
1109 (do_captured_list_thread_ids): New function.
1110 (gdb_list_thread_ids): New function.
1112 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
1114 2000-01-11 Christopher Faylor <cgf@cygnus.com>
1116 * configure.in: Avoid linking -limagehlp unless it's a native build.
1117 * configure: Regenerate.
1118 * thread.cc (add_thread): Clear private data pointer here or suffer
1119 strange behavior when it is checked for NULL later.
1121 2000-01-09 Christopher Faylor <cgf@cygnus.com>
1123 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
1124 * configure.in: Add an additional library to cygwin link.
1125 * configure: Regenerate.
1127 Patch from Egor Duda <deo@logos-m.ru>:
1128 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
1131 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
1133 * uw-thread.c: New file to support UnixWare user-mode threads:
1134 contributed by Nickolas Duffek <nsd@cygnus.com>.
1135 * target.h (struct target_ops): New vector, to_extra_thread_info,
1136 allows back-ends to give extra details in info thread display.
1137 (target_extra_thread_info): define new macro.
1138 (target_find_new_threads): simplify macro. Cleanup comments.
1139 * target.c (to_extra_thread_info): default and inherit new vector.
1140 (cleanup_target): eliminate PARAMS, break up long lines,
1141 provide default definition for to_extra_thread_info, and
1142 to_find_new_threads. Default to_thread_alive and to_query
1143 to return_zero, not target_ignore (they each return int not void).
1144 (debug_to_find_new_threads): new debug entry.
1145 (setup_target_debug): add debug_to_find_new_threads.
1146 * gdbthread.h: export struct thread_info, find_thread_pid, and
1147 iterate_over_threads. Add comments. Eliminate PARAMS. Update
1148 copyright. Add new private data pointer for use by target back-ends.
1149 * thread.c (struct thread_info): move definition to gdbthread.h.
1150 (find_thread_pid): new exported function for thread lookup.
1151 (iterate_over_threads): new exported function for applying
1152 arbitrary operations to threads. Update copyright to 2000.
1153 (info_threads_command): use new target_extra_thread_info vector
1154 to display extra information about each thread (if implemented).
1155 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
1156 Add defines for PIDGET, etc.
1157 * config/i386/tm-i386sol2.h: ditto.
1158 * config/sparc/tm-sun4sol2.h: ditto.
1159 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
1160 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
1161 if -lpthread and -lpthreads fail.
1163 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
1164 (proc_flags): combine flags that UnixWare splits into two locations.
1165 (proc_modify_flag): add support for PR_KLC (kill on last close).
1166 (proc_[un]set_kill_on_last_close): new functions.
1168 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1170 * infrun.c (normal_stop): Print out thread id when we stop.
1172 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
1174 * remote.c (remote_open_1): Fix message so it does not imply a
1175 specific syntax for serial ports, as it is OS dependent.
1176 (remote_async_open_1): Ibid.
1177 (init_remote_ops): Ibid.
1179 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
1181 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
1182 "set remotebaud" command (if set) when no speed is specified on
1183 the "target rdi" command.
1185 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
1187 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
1189 (baud_options[]): Ibid.
1191 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
1193 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
1194 used by each operating system.
1196 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1198 * breakpoint.c (until_break_command): Add an argument for the
1199 continuation, the beginning of the cleanups set up by this
1201 (until_break_command_continuation): Do cleanups until the one
1202 passed in as argument instead of doing all of them.
1204 * infcmd.c (finish_command_continuation): Expect a new argument,
1205 which indicates up to where to do cleanups. Update calls to
1206 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
1207 (finish_command): Add another argument for the continuation: the
1208 starting cleanup for this command.
1210 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
1212 From Grant Edwards <grante@visi.com> (original patch from Thomas
1214 * rdi-share/ardi.c: Allow interruption of interruptible
1215 targets with a <CNTL-C>.
1217 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
1219 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
1220 to control port to accommodate some versions of Angel.
1222 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
1224 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
1225 Add interpretation for C Support Library packets.
1227 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
1229 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
1230 is now being modified.
1231 * rdi-share/devsw.h: Adjust declaration of the above funtion.
1233 For older changes see ChangeLog-99
1239 version-control: never