1 Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com)
3 * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
4 Fixup cache_on and flush_i_cache so that they work for both the
5 930 and 932 processors. Rewrite most low level funcs (uart
6 access & cache stuff) to use new ASI access macros in sparclite.h.
7 Also make it easy to access second serial port.
9 Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
11 * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
12 <sys/stat.h>; not needed.
14 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
16 * stack.c (print_frame_info): In "pathological" case, don't
17 distrust the line number information.
19 Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com)
21 * mips-tdep.c (mips_print_register): handle 64 bits register.
22 * valprint.c (print_longest): fix a bug in printing 64 bits value.
24 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
28 * Makefile.in (install): Do the sed for program_transform_name
29 ourselves instead of worrying about INSTALL_XFORM. This enables
30 users to override INSTALL_PROGRAM in the standard way.
32 * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
33 depend on Makefile.in.
35 * defs.h, valprint.c: Make longest_to_int a function not a macro.
36 Only test against INT_MIN if a LONGEST is bigger than an int.
38 * README: Change GhostScript to Ghostscript.
40 Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com)
42 * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
43 Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
45 * Makefile.in (ALLPARAM): Add these files.
47 * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
49 * Makefile.in: Add Kung's new mips64 files.
51 Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com)
53 * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
54 mips64el-*-ecoff and mips64-big-*.
55 * defs.h: get rid of FORCE_LONG_LONG.
56 * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
57 parsing. Change register size to be MIPS_REGSIZE.
59 Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com)
61 * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,
62 osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c,
63 xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
65 Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
67 * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
68 (remove_commands, add_commands): Add/remove hms-drain when target
71 Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com)
73 * configure.in: Add Lynx/rs6000 support.
74 * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
75 messages. Add rs6000 support. Don't try to modify unwritable
77 * rs6000-nat.c: Move lots of native dependent stuff (like core
78 file support) from rs6000-tdep.c & xcoffexec.c to here.
79 * rs6000-tdep.c: Move native dependent stuff to nat.c.
80 * xcoffexec.c: Move native dependent stuff to nat.c.
81 * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
83 * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
85 * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
86 New files to support Lynx/rs6000.
88 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
90 * README: Remove note about gcc warnings on alpha, these should be
92 * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
93 m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
94 remote-utils.c, stabsread.c: Include <string.h>.
95 * regex.c: Include "defs.h", change re_comp argument to const char *.
96 * infptrace.c (fetch_register, store_inferior_registers): Change
97 regaddr to type CORE_ADDR.
98 * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
99 Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
101 Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
103 * symtab.h: Always define BYTE_BITFIELD to nothing.
105 Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
107 * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
108 * configure.in: Remove comment about m68k-em.mt.
109 * Makefile.in: Remove references.
111 Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
113 * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
116 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
118 * target.c (target_preopen): If target_kill doesn't remove the
119 target from the stack, use pop_target to do it.
121 * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
122 of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
123 changes to stabsread.c from summer 1993.
125 * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
126 printing the program, rather than passing NULL to printf.
127 (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
128 try to call UDIDisconnect again. Print better message.
129 (udi_kill): Just call UDIDisconnect ourselves, rather than doing
131 (udi_create_inferior): If udi_session_id is negative, open a new
132 TIP rather than giving an error.
134 * config/mips/mipsm3.mh, config/i386/i386m3.mh,
135 config/ns32k/ns32km3.mh: Define NAT_FILE.
136 * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
137 (it was inconsistent and namespace-wrong) to NM_M3_H.
138 * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
139 (m3_open): New function.
141 * TODO: Update Mach section.
143 * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
145 Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
147 * printcmd.c (printf_command): Add missing single-letter
148 backslash-escape sequences, and improve error message.
150 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
152 * corelow.c (solib_add_stub, core_open): Pass address of from_tty
153 rather than trying to shove an int into a pointer and back out
154 again. This avoids compiler warnings.
156 * defs.h (alloca): Declare as void *, not char *, on hpux.
157 Don't prototype it, just declare the return type.
159 Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
161 * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
162 (REGISTER_CONVERT_TO_RAW): Add missing backslash.
164 Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
166 * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
167 ZERO_REGNUM, just read it as zero without talking to the board.
169 * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
171 * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
172 to store_floating, not nonexistent variable len.
174 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
176 (mips_store_word): Change calling convention to return errors, and
177 to provide old contents if the caller wants it.
178 (mips_xfer_memory): Deal with errors from mips_store_word.
179 * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
180 define now that remote-mips.c doesn't use BREAKPOINT.
182 * remote-mips.c (mips_create_inferior): Call warning if arguments
183 specified, and then execute "set args" command. Call error, not
184 mips_error, if executable file not specified.
186 * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
189 * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
192 Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
194 * value.h (print_longest): Rename "value" to "val" in prototype
195 declaration because some compilers don't like arguments whose
196 names are the same as types.
197 * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
198 before passing it to remote_*_bytes.
200 Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
202 * h8500-tdep.c (saved_pc_after_call): The size of the
203 pc is memory model dependent. (segmented_command,
204 unsegmented_command, _initialize_h8500_tdep): New commands to
206 * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
208 * remote-hms.c (hms_load): Remove breakpoints when loaded.
209 (hms_wait): Use new status structure
210 (hms_open): Push the target here. (hms_before_main_loop): Not
211 here. (supply_val, hms_fetch_register, hms_store_register): Cope
212 with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
213 * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
214 all registers in a compact way.
216 Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
218 * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
219 as CORE_ADDR to match definition in rs6000-tdep.c.
221 Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
223 * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
224 * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
225 definitions into the psymtab.
227 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
229 * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
230 a special exceptionSize for the 68332.
232 * remote-udi.c (udi_attach): If no arguments, print error.
234 Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
236 * Makefile.in (VERSION): Bump to 4.12.1
237 * NEWS, README: Update to match 4.12 release.
239 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
241 * command.c (empty_sfunc): New function.
242 (add_set_cmd): Use it instead of not_just_help_class_command.
243 (not_just_help_class_command): Change calling convention back to
244 what it was before yesterday's change.
246 * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
247 of the type if present.
249 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
251 * printcmd.c (decode_format): Don't blithely set the size for
252 an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
254 * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
255 If BFD64, make a LONGEST a BFD_HOST_64_BIT.
256 * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
257 always just check against INT_MIN and INT_MAX (this also fixes things
258 if sizeof (long) > sizeof (int), e.g. Alpha).
259 * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
260 Don't define LONGEST or BUILTIN_TYPE_LONGEST.
261 * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
262 BUILTIN_TYPE_UNSIGNED_LONGEST.
263 * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
264 longest_int and longest_unsigned_int.
265 * value.h (struct value): Just align to LONGEST, rather than worrying
266 about CC_HAS_LONG_LONG.
267 * valarith.c (value_binop): Figure out type ourself based on
268 sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
269 point is that we don't depend on CC_HAS_LONG_LONG anymore.
270 * valprint.c (val_print_type_code_int): Just call
271 extract_unsigned_integer directly, rather than going through
273 * printcmd.c (decode_format): Remove code which would sometimes
274 change 'g' size to 'w' for integers. print_scalar_formatted handles
275 printing huge integers well enough, thank you.
277 * command.c (add_set_cmd, not_just_help_class_command): Change
278 to make this the sfunc, not cfunc, since that is how we call it.
279 * command.h: Comment difference between sfunc and cfunc.
280 * demangle.c (set_demangling_command): Add third arg since that
282 (_initialize_demangler): Use sfunc, not cfunc, for
283 set_demangling_command, since that is how it is called.
284 Remove show_demangling_command; it has no effect.
286 * command.c (shell_escape): Report errors correctly (with error
287 message from strerror).
289 Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
291 * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
292 x_scnlen.l rather than x_scnlen to match corresponding change in
295 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
297 * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
298 Change comments regarding TYPE_CODE_BOOL.
299 * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
300 regardless of the language.
301 (value_true): Just call value_logical_not regardless of language.
302 * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
303 Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
304 * language.h: Improve comment for la_builtin_type_vector.
305 * m2-lang.c (_initialize_m2_language): Don't add any fields to
306 builtin_type_m2_bool.
308 Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
310 * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
311 Define IN_SIGTRAMP and backtrace correctly through signal handlers.
313 Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
315 * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
316 by restarting the ioctl.
318 Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
320 * target.h (target_wait): Add comment about calling
323 Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
325 * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
326 additional arguments.
327 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
329 Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
331 * sparc-stub.c: Remove unnecessary #include of memory.h.
333 Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
335 * mips-tdep.c: Remove code which sets saved_regs from
336 init_extra_frame_info and put it in new function mips_find_saved_regs.
337 (READ_FRAME_REG): Remove macro and replace uses with the expansion.
338 * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
339 check if it is NULL and call mips_find_saved_regs if so.
341 * remote-mips.c: Use unfiltered, not filtered, output most places.
343 * blockframe.c (get_prev_frame_info): Detect and stop an infinite
344 backtrace. Revise comments.
346 Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
348 * mdebugread.c (parse_procedure): Remove _sigtramp kludges for
349 alpha and irix. The _sigtramp case has to be handled properly
350 in the tdep files if we have no ecoff debugging info.
351 * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
352 mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
353 without PC_REGNUM kludge.
354 * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
355 Clean up handling of mips sigtramp frames, improve comments.
357 Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
359 * paread.c (read_unwind_info): Fix typo.
361 * paread.c (pa_symtab_read): Update the "check_strange_names"
362 filter to match GCC's current output. Filter out section symbols
363 (which the HP linker sometimes puts in the wrong place).
365 Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
367 * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
369 * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
371 * Makefile.in: Remove all references to sparcly-nat.c.
373 * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
374 remote-sim.h directly, rather than via $(remote_utils_h). This avoids
375 duplicating serial.h and target.h.
377 * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
378 are not used anywhere (a 5 Oct 1993 change removed the uses).
380 * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
381 * config/m68k/es1800.mt: Add comment.
382 * remote-es.c: Extensive changes to update to current conventions.
384 * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
385 If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
386 to achieve the desired timeout.
387 * serial.h (serial_t): Add field timeout_remaining.
389 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
391 * c-exp.y (yylex): Reenable nested type code.
393 Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
395 * a29k-tdep.c (examine_tag): Add comment regarding argcount.
397 * remote-mips.c (mips_ops): Fix docstring.
399 * remote-bug.c (bug_ops): Remove spurious newline from docstring.
401 * config/m68k/tm-monitor.h: Changes to bring this into accordance
402 with the old tm-m68k-em.h:
403 (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
404 (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
405 (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
406 Add FIXME regarding GET_LONGJMP_TARGET.
408 * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
409 * infptrace.c (kill_inferior): Add comments.
410 * main.c (quit_command): Call target_close after we kill or
412 * remote-udi.c (udi_close): Don't error() if QUITTING.
414 Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
416 * configure.in: Make m68k-coff and aout add monitor support in
417 addition to the standard serial support.
419 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
421 * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
424 Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
426 * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
427 * elfread.c (record_minimal_symbol_and_info),
428 dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
430 Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
432 * i386-stub.c: Add ".text" right before "mem_fault:".
434 * main.c (baud_rate): Add FIXME comment about printing -1 value.
436 * remote-utils.c (usage): Fix message to be accurate and conform
437 more closely to normal conventions.
439 * remote-utils.c (gr_files_info): Have the exec_bfd test control
440 whether to show information about exec_bfd, and not control whether
441 to show information about device and speed.
443 * remote-utils.c (gr_open): If sr_get_device returns NULL, give
444 usage message, don't dump core.
446 * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
447 for variable size array.
448 (bug_fetch_register, bug_store_register): Rename "value" to
449 "fpreg_buf" because some compilers don't like variables whose
450 names are the same as types.
451 (bug_store_register): Use a cast when converting char * to
454 * symmisc.c (maintenance_print_symbols): Don't refer to the name
455 of the command in error message (the text was referring to the old
456 name of the command).
458 * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
460 * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
461 full details on structure elements without names. This partially
462 reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
463 of those changes was accidental.
465 * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
466 defined, make it an error to specify a single argument which is not
469 * Makefile.in (version.c), main.c (print_gdb_version): Use
470 host_alias and target_alias, not host_canonical and
471 target_canonical, to print configuration.
473 Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
475 * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
476 of builtin_type_long. It is necessary to get a type which is
477 TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
479 Fix many sins which will come up in 32 bit x 64 bit GDB, and
480 various miscellaneous things discovered in the process:
481 * printcmd.c, defs.h (print_address_numeric): New function.
482 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
483 breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
484 cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
485 printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
487 * utils.c, defs.h (gdb_print_address): New function.
488 * expprint (dump_expression), gdbtypes.h: Use it.
489 * breakpoint.c (describe_other_breakpoints),
490 symmisc.c (dump_symtab, print_symbol):
491 Use filtered not unfiltered I/O.
492 (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
493 just run gdb under a debugger for this (and it had problems with
494 printing addresses, how to print b->shadow, etc.).
495 * buildsym.c (make_blockvector), core.c (memory_error),
496 exec.c (print_section_info), maint.c (print_section_table),
497 mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
498 symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
499 Add comments saying code is broken. Marked with "FIXME-32x64".
500 * dbxread.c (process_one_symbol), partial-stab.h (default),
501 remote-vx.c (vx_run_files_info):
502 Don't cast int being passed to local_hex_string.
503 * symmisc.c (print_symbol): Don't cast long being passed to %lx.
504 * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
506 * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
508 * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
509 * source.c: Include <sys/types.h> regardless of USG.
511 Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
513 * valops.c (value_assign): Set `type' after coercing toval.
514 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
515 Use extract_unsigned_integer to get the address of a reference.
517 Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
519 * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
520 AIX can use ? instead of \ for continuation. Deal with it.
522 * paread.c (read_unwind_info): Just assign to objfile->obj_private,
523 not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
524 the HP compiler in ANSI mode doesn't like.
526 * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
527 based on USG, rather than defining HAVE_SIGSETMASK to an
528 expression containing defined. Having a macro used in #if expand
529 to an expression containing "defined" is undefined according to
530 ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
533 Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
535 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
536 Clean up the changes of 11 Jan, as recommended by Peter Schauer.
538 Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
540 * ch-exp.y (match_string_literal): Allow a zero-length string.
541 * ch-lang.c (chill_printstr): Don't print zero-length string funny.
543 Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
545 * i386aix-nat.c (i386_float_info): Reverse order of registers before
546 passing them to print_387_status.
547 (print_387_status): Don't subtract top from 7 before using it.
548 * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
549 from 7; the above explains it.
551 Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
553 * mips-tdep.c (init_extra_frame_info): Use frame relative stack
554 pointer value when fixing up the frame at the start of a function.
556 Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
558 * lynx-nat.c (fetch_core_registers): Load the I & L regs for the
559 Sparc from the stack.
561 Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
563 * remote-mips.c (mips_initialize): Clear mips_initializing via
564 cleanup chain, not directly.
566 * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
567 of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are
568 munging the timeout due to the limited range of c_cc[VTIME].
570 * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
571 * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
572 m3-nat.c (m3_create_inferior): Pass it.
573 * procfs.c: Remove ptrace function. It was declared in a way which
574 conflicted with the prototype in unistd.h on Solaris.
576 Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
578 * sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc
579 in the sigcontext if it is a signal trampoline frame.
580 * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
583 Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com)
585 * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
586 config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to
587 tm-sparc.h so they can be overridden if necessary.
589 Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com)
591 * lynx-nat.c: Add Sparc support.
592 * sparcly-nat.c: Remove. It's useless.
593 * config/sparc/nm-sparclynx.h: Rewrite.
594 * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o
596 * config/sparc/tm-sparclynx.h: Rewrite.
598 Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
600 * rs6000-pinsn.c: Use the new disassembler in the opcodes
601 directory. Old code was discarded, since the new opcode table has
604 Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com)
606 * Makefile.in (realclean): Remove info files per make-stds.texi.
608 Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
610 * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
611 if N_SO_ADDRESS_MAYBE_MISSING is defined.
612 * config/sparc/tm-sun4sol2.h: Define it.
614 Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
616 * printcmd.c (print_address_symbolic): Unconditionally use msymbol
617 if we did not find a symbol.
619 Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
621 * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
624 * hppab-nat.c (call_ptrace): Delete redundant function.
625 (kill_inferior, attach, detach, child_resume): Likewise.
626 (child_xfer_memory): Likewise.
628 * hppah-nat.c (call_ptrace): Delete redundant function.
629 (kill_inferior, attach, detach, child_resume): Likewise.
631 * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
633 * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
635 * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
637 * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
638 (CHILD_XFER_MEMORY): Define.
639 (PT_*): Define so that generic infptrace.c code can be used.
641 Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
643 * xcoffread.c (xcoff_symfile_read): Make second parameter a
644 struct section_offsets *, not a (nonexistent) struct section_offset *.
646 * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
647 internal_xcoff_symtab, not an array of one of them. Change lots of
648 "main_aux" to "&main_aux" and so on.
650 * coffread.c, xcoffread.c: Include <coff/internal.h>
653 Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
655 * coffread.c (coff_getfilename): Make it not static.
657 * xcoffread.c (read_xcoff_symtab): complain() not abort().
659 * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
660 a completely gratuitous difference between xcoffread.c and coffread.c).
662 Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
664 * infrun.c (wait_for_inferior): Don't set frame for
665 step_resume_breakpoint for IN_SIGTRAMP cases.
667 * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
668 breakpoint.c (bpstat_what): Move step_resume from its own field of
669 the struct bpstat_what into the main_action. Make it override
670 other breakpoints. This is a conservative change in the sense
671 that before the step resume breakpoint was a breakpoint.c
672 breakpoint, hitting the step resume breakpoint overrode even
673 calling bpstat_stop_status.
675 Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
677 * infrun.c (normal_stop): Set stop_pc after popping the dummy frame
678 in case execution was stopped in the called function.
679 * stack.c (print_frame_info, frame_info): If backtracing through
680 a call dummy, handle the starting source line number on a line
681 boundary like backtracing through sigtramp.
682 * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
683 for call dummy frame right. Remove old test for dummy frame,
684 it has been unused at least since gdb-3.5.
685 * sparc-tdep.c (sparc_push_dummy_frame): Set return address register
688 Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
690 * infcmd.c (signal_command): Accept 0 as legitimate signal number.
692 Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
694 * infrun.c (signals_info), target.c (target_signal_from_name):
695 Use ugly casts to avoid enumvar < enumvar or enumvar++.
697 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
699 * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
700 * inflow.c (terminal_ours_1): When discussing how to deal with the
701 tty state, make note of query() as well as readline.
703 * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
704 signals for which stop and print are cleared by default.
706 Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
708 * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
709 reserved fields to hold a stub unwind entry type. Fix typo.
710 (stub_unwind_entry): New structure for raw stub unwind entries.
711 (stub_unwind_types): The types of stubs we may encounter.
712 (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
713 * hppa-tdep.c (rp_saved): Use additional information provided
714 by linker stub unwind descriptors.
715 (frameless_function_invocation): Likewise.
716 (frame_chain_valid): Likewise.
717 * paread.c (compare_unwind_entries): New function for sorting
718 unwind table entries.
719 (read_unwind_info): Rewrite to remove dependency on host endianness.
720 Read in data from the $UNWIND_END$ subspace which contains linker
721 stub unwind descriptors. Merge that data into the basic unwind
724 * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
726 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
728 * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
729 from either the symbol name or the auxent.
730 * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
733 Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com)
735 * Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h.
737 Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
739 * README: Update notes for alpha port.
741 Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
743 * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
744 for operation fault, constraint fault, and type fault.
746 Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
748 * Makefile.in (init.c): Add comment explaining formatting conventions.
750 * c-exp.y (parse_number): Assign to temporary between the right
751 shifts, to work around a bug in the SCO compiler.
753 * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
754 Add various files which were added to GDB recently.
756 * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
759 * Makefile.in: Add mostlyclean target.
761 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
765 Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com)
767 * main.c (show_commands): Make return type of extern
768 history_get be HIST_ENTRY, rather than struct _hist_entry.
769 (The latter loses with the upcoming merged readline.)
771 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
773 * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
774 const char *, not char *.
776 * symtab.h (struct symbol): Make section short, not unsigned short.
778 * symtab.c (lookup_symbol): Add comment about QUIT here.
780 * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
782 * c-exp.y (parse_number): Check for overflow regardless of range
783 checking. Fix overflow check to use unsigned LONGEST, not
786 * c-exp.y (parse_number): Make it so that integer constants are
787 builtin_type_long_long if builtin_type_long isn't big enough or if
788 an "LL" suffix is used. Properly handle "UL" or "LU" suffixes.
790 * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
791 Print our "()" first, then recurse for the target type.
793 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
795 * remote-udi.c (udi_create_inferior): Quote empty execfile argument.
797 * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
799 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
801 * utils.c (request_quit): Re-establish signal handler regardless
804 * config/mips/xm-irix4.h: Define HAVE_TERMIOS.
806 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
808 * i960-tdep.c: Include target.h.
810 Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com)
812 * lynx-nat.c (sys/wait.h): Don't use absolute pathname.
814 Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
816 * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
817 changes (status -> ourstatus; declare status, etc.).
818 * config/nm-lynx.h: Fix child_wait prototype and include target.h.
820 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
822 * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
824 Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
826 * remote-mips.c (mips_request, mips_wait): Correct prototypes.
828 Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
830 * config/i386/xm-linux.h: Define HAVE_TERMIOS.
832 Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
834 * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
836 Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
838 * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
839 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
841 * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
844 Add search to target vector (#if 0'd until after 4.12):
845 * target.h (to_search, target_search): Add.
846 * gdbcore.h, core.c (generic_search): Add.
847 * remote.c (remote_search): Add.
848 * a29k-tdep.c (init_frame_info): Use target_search to find traceback
851 * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
852 is on, call find_pc_function rather than relying just on the minimal
853 symbols (probably only matters for symbol readers which don't put
854 statics in the minimal symbols, but changing this strikes me as
855 not conservative enough).
856 Initialize name_location in all cases.
857 If no symbol and no msymbol, don't print anything symbolic.
859 * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
861 Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
863 * printcmd.c (print_address_symbolic): Make it search the
864 symtabs for variables as well as functions. Add `set print
865 fast-symbolic-addr' and default it to fast (the old way).
866 Print line numbers for data items as well as functions.
868 * symtab.c (find_addr_symbol): Return the symtab and the symbol
869 address, if a symbol is found (take two more args pointing to
870 where to store these results).
872 * symtab.h (find_addr_symbol): Add prototype.
874 Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
876 * objfiles.h: Fix comments to reflect the fact that the phrase
877 "top of stack" always refers to where the pushing and popping takes
878 place, regardless of whether it is at the highest or lowest address.
880 Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
882 * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
883 compiler generated tag names.
884 * mdebugread.c (parse_type): Handle cross references to qualified
886 * valops.c (value_struct_elt): Improve error message if the
887 address of a method is requested from an object instance.
888 * valops.c (search_struct_method): Make name_matched non-static
889 to get it initialized correctly.
890 * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
891 exclude segment register which are not writable on newer SCO versions.
893 Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
895 * go32-xdep.c: Remove unused function uerror.
896 (sigsetmask): Declare return type. Declare argument (to match the
897 way it is called). Explicitly return 0.
899 Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
901 * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
902 partial_symbol): Shrink the storage sizes of symbols, by making
903 enums into 1-byte bitfields when compiled __GNUC__, moving all the
904 enums and small ints to the end of each struct to improve
905 alignment, and switching the section number from int to unsigned
908 Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
910 * symtab.c (find_addr_symbol): New routine that will find the nearest
911 symbol associated with an address. It does so by exhaustive
912 search of the symtabs, so it's slow but complete.
914 Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
916 * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
917 to [0,0] rather than [0, end of first source file]. This avoids
918 problems with other parts of GDB looking for linetables in the
919 _globals_ symtab. Eliminate variables num_object_files and
920 first_object_file_end.
922 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
924 * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
925 (pop_frame): Restore PC2 and LR0 from dummy frames.
926 (push_dummy_frame): Save PC2 and LR0 into dummy frames.
927 (setup_arbitrary_frame): Handle 3 args and set up real frames.
928 * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
929 (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
930 (SETUP_ARBITRARY_FRAME): Define.
932 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
934 * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
936 Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
938 * remote-udi.c (udi_resume): Correct prototype.
940 Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
942 * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
943 hppa_frame_find_saved_regs.
944 * hppa-tdep.c (dig_fp_from_stack): Delete function.
945 (prologue_inst_adjust_sp): New function.
946 (is_branch, inst_saves_gr, inst_saves_fr): New functions.
947 (skip_prologue): Completely rewrite to use unwind information.
948 (hppa_frame_find_saved_regs): Likewise.
950 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
952 * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
953 to convert a signal number with appropriate bounds checking.
955 * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
957 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
959 * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
960 print a newline to end the display anyway.
962 * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
963 coprocessor status regs) when popping a frame. This fixes
964 float exceptions that occur after calling inferior functions.
966 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
967 Read and write the fsr (float status register) to/from the child
968 process along with the float regs. Remove Peter Schauer's change
969 of May 24 '93, which has higher overhead and doesn't solve the
970 real problem (which was that FSR wasn't being set).
972 Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
974 * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
975 stack overflow check isn't right after the register stack
976 adjustment instruction. Metaware R2.3u compiler moves other
977 things in front of it. This fix isn't perfect but is what's
980 Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
982 * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
984 * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
986 * configure.in: Change accordingly.
988 Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
990 * m68k-stub.c, sparc-stub.c: removed spurious introduction of
991 _filtered io routines from these two files.
993 Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
995 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
996 config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
997 * mdebugread.c (parse_symbol): Handle enum sh.type produced by
999 * mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
1001 Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1003 * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
1004 printing to gdb_stderr.
1006 * remote-udi.c (udi_kill): Don't close the connection, just set
1007 inferior_pid to zero.
1008 (udi_mourn): Call remove_breakpoints.
1010 * remote-udi.c: Remove obsolete need_artificial_traps comment.
1012 * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
1014 Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1016 * symtab.c (lookup_symbol): Don't try adding .c to the name.
1018 * remote-bug.c: At the start of each section, reset srec_frame
1021 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
1022 * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
1023 * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
1024 code which looks for those two waitkinds. Use switch statement.
1025 * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
1026 CHILD_SPECIAL_WAITSTATUS.
1028 * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
1029 * Move target_signal_from_host, target_signal_to_host, and
1030 store_waitstatus from inftarg.c to target.c. procfs needs them.
1031 * target.c: Include "wait.h" and <signal.h>.
1032 * target.h, infrun.c (proceed), proceed callers: Pass new code
1033 TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
1034 enums being treated as unsigned and is cleaner.
1035 * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
1037 * infcmd.c (signal_command), infrun.c (signals_info):
1038 Don't allow user to specify numeric equivalent of
1039 TARGET_SIGNAL_DEFAULT.
1041 Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
1043 * config/alpha/alpha-netware.mt: New target support for Alpha
1045 * configure.in: Add alpha-*-netware* target.
1047 Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
1049 * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
1051 Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1053 * target.h: Add enum target_waitkind, enum target_signal, and
1054 struct target_waitstatus. Change status argument to target_wait to
1055 be struct target_waitstatus * instead of int *.
1056 * target.h, infrun.c, all targets: Change type of signal arguments
1057 to resume(), proceed(), and target_resume() from int to enum
1059 * All targets (*_wait, *_resume): Change accordingly.
1060 * infcmd.c (program_info, signal_command), throughout infrun.c,
1061 * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
1062 * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
1063 signal code stuff right with the new signals would be non-trivial).
1064 * inferior.h (stop_signal): Make it enum target_signal not int.
1065 * target.c, target.h (target_signal_to_string, target_signal_to_name,
1066 target_signal_from_name): New functions.
1067 * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
1068 store_waitstatus): New functions.
1069 * procfs.c (procfs_notice_signals): Use them.
1070 * i960-tdep.c (i960_fault_to_signal): New function, to replace
1072 * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
1074 * objfiles.c (build_objfile_section_table): Don't abort() if
1075 objfile->sections is already set.
1077 * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
1078 to match recent change to exec.c.
1082 * main.c (print_gdb_version): Change year to 1994.
1084 * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
1085 * Makefile.in (NONSRC): Add ChangeLog-93.
1087 Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1089 * stabsread.c (read_type): Allow defining several type numbers
1090 at once (e.g. "(1,2)=(3,4)="...).
1092 * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
1094 * breakpoint.c (frame_in_dummy): Check PC as well as frame.
1096 Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1098 * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
1099 to process_one_symbol.
1100 * symtab.c (find_pc_psymbol): Search global_psymbols as well to
1101 avoid caching a bad endaddr in find_pc_partial_function.
1103 Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1105 * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
1107 Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1109 * infrun.c (wait_for_inferior): Do not step or step resume past
1110 the end of a one-line function we just stepped into.
1112 For older changes see ChangeLog-93
1118 version-control: never