Update README file to 5.0.
[deliverable/binutils-gdb.git] / gdb / ChangeLog
1 Thu May 11 17:22:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
2
3 * README: Update for GDB 5.0.
4
5 Thu May 11 13:24:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
6
7 * mips-tdep.c (MIPS_DEFAULT_STACK_ARGSIZE): Fix typo.
8
9 * config/mips/tm-irix5.h (GDB_MULTI_ARCH): Add
10 definition. Disable. Document known problems.
11 (MIPS_DEFAULT_ABI): Define.
12
13 * mips-tdep.c (enum mips_abi): Define.
14 (struct gdbarch_tdep): Replace mips_eabi with mips_abi.
15 (MIPS_EABI): Update.
16 (mips_gdbarch_init): Add preliminary support for IRIX N32 ABI.
17 Determine ABI from either ELF_FLAGS or MIPS_DEFAULT_ABI. When
18 looking for a matching architecture require a matching MIPS_ABI.
19 (mips_gdbarch_init): Cleanup arch_debug information.
20
21 2000-05-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
22
23 * solib.c (symbol_add_stub): Remember the index and the name of
24 the section with the lowest address. Use this data (instead of
25 data from .text) to pass info into symbol_file_add.
26
27 * elfread.c (record_minimal_symbol_and_info): Use the section
28 where the symbol lives to get the index, instead of guessing.
29
30 2000-05-10 Michael Snyder <msnyder@seadog.cygnus.com>
31
32 Make Sparc a Multi-Arch target. Discard PARAMS macro (require ANSI).
33 * sparc-tdep.c: include arch-utils.h.
34 (SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
35 DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
36 (GDB_TARGET_IS_SPARC64): make into a runtime test.
37 (struct frame_extra_info): Define, use instead of the macro.
38 (Many places): Use alloca instead of statically allocated buffers
39 that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
40 (sparc_extract_struct_value_address): Accept a pointer arg instead
41 of an array sized by REGISTER_BYTES.
42 (examine_prologue): Accept a pointer to an array of CORE_ADDR,
43 instead of the defunct struct frame_saved_regs. Recognize new
44 Sparc64 store instructions as part of the prologue. Ignore the
45 destination of a frame store when parsing the prologue (so long
46 as it's on the stack).
47 (sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
48 (sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
49 instead of the defunct struct frame_saved_regs.
50 (supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
51 supply_register. Provide 4-byte offset to compensate for diff
52 between size of the prgreg_t elements on a 64-bit host and size
53 of the registers for a 32-bit target. Fill all inaccessible regs
54 with zero so they won't keep being requested again and again.
55 (fill_gregset): Handle 32/64 size difference between registers
56 and prgreg_t. Handle as many new 64-bit regs as possible.
57 (supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
58 (sparc_push_arguments): Rename to sparc32_push_arguments.
59 Copy arguments into registers as well as onto stack, so that the
60 CALL_DUMMY (code pushed onto the target stack) is not required.
61 (sparc_extract_return_value): Rename to sparc32_extract_return_value.
62 (sparc_store_return_value): Use memset instead of bzero.
63 Use write_register_gen instead of write_register_bytes.
64 (sparclet_store_return_value): New function.
65 (_initialize_sparc_tdep): Call register_gdbarch_init to activate
66 the gdbarch multi-architecture system.
67 (sp64_push_arguments): Rename to sparc64_push_arguments.
68 Extend to store arguments in general registers as well as on stack.
69 (sparc64_extract_return_value): Rename to sp64_extract_return_value.
70 Use as a private function, to be called by the new external function
71 sparc64_extract_return_value.
72 (sparclet_extract_return_value): New function.
73 (sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
74 sparc64_register_name, sparc_print_extra_frame_info,
75 sparclite_register_name, sparclet_register_name,
76 sparc_push_return_address, sparc64_use_struct_convention,
77 sparc32_store_struct_return, sparc64_store_struct_return,
78 sparc32_register_virtual_type, sparc64_register_virtual_type,
79 sparc32_register_size, sparc64_register_size,
80 sparc32_register_byte, sparc64_register_byte,
81 sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
82 sparc_convert_to_raw, sparc_frame_init_saved_regs,
83 sparc_frame_address, sparc_gdbarch_fix_call_dummy,
84 sparc_coerce_float_to_double, sparc_call_dummy_address,
85 sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
86 sparc_return_value_on_stack): New functions supporting multi-arch.
87 (sparc_gdbarch_init): New function; initialize multi-arch.
88 (struct gdbarch_tdep): Define, use for private multi-arch data.
89 * config/sparc/tm-sparc.h: Move definitions around, enclose with
90 #ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
91 definitions. Add enums for register names, to help debugging gdb.
92 This header file must work for non-multi-arch and for multi-arch.
93 * config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration. Also add
94 AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
95 Define GDB_MULTI_ARCH.
96 * config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
97 Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
98 * config/sparc/tm-sparclite.h: Ditto.
99 * config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
100 * sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
101 avoid using deprecated REGISTER_NAMES macro.
102 * Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
103
104 2000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>
105
106 * gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
107 * gdbarch.c, gdbarch.h: Regenerate.
108 * core-regset.c: Change FP0_REGNUM to a runtime test.
109 * procfs.c: Ditto.
110 * sun3-nat.c: Ditto.
111 * sparc-tdep.c: Ditto.
112
113 * i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
114 * ptx4-nat.c: Ditto.
115
116 * sol-thread.c (sol_thread_create_inferior): only add the thread
117 to the thread list if it is not already in there.
118 (prototypes for thread_db func ptrs): pretty up formatting.
119
120 2000-05-08 Eli Zaretskii <eliz@is.elta.co.il>
121
122 * config/djgpp/djconfig.sh: Use more warning switches.
123
124 * config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
125 @V@ placebo. djunpack.bat changed accordingly.
126
127 Mon May 8 11:19:47 2000 Andrew Cagney <cagney@b1.cygnus.com>
128
129 * mips-tdep.c (size_auto, size_32, size_64, size_enums): Rename
130 saved_gpreg_size_auto, saved_gpreg_size_32, saved_gpreg_size_64
131 and saved_gpreg_size_enums.
132 (mips_stack_argsize): Update. Cleanup.
133
134 * mips-tdep.c (STACK_ARGSIZE): Delete macro. Replaced by
135 MIPS_STACK_ARGSIZE.
136 (MIPS_NABI32): Delete macro. Replaced by
137 MIPS_REGS_HAVE_STACK_HOME_P.
138 (mips_push_arguments): Update.
139 (mips_push_arguments): Replace check for MIPS_EABI or MIPS_NABI32
140 with test for MIPS_REGS_HAVE_STACK_HOME_P.
141 (MIPS_REGS_HAVE_STACK_HOME_P): Define. Provide non- multi-arch
142 default.
143 (struct gdbarch_tdep): Add mips_regs_have_stack_home_p and
144 mips_default_stack_argsize.
145 (MIPS_STACK_ARGSIZE): Define as mips_stack_argsize.
146 (mips_stack_argsize_string): New static variable.
147 (mips_stack_argsize): New function, handle default case.
148 (__initialize_mips_tdep): Add command ``set mips stack-arg-size''
149 implemented as an enum using size_auto et.al.
150 (mips_gdbarch_init): Initialize mips_default_stack_argsize and
151 mips_regs_have_stack_home_p.
152
153 * config/mips/tm-irix5.h (MIPS_DEFAULT_SAVED_REGSIZE): Define as 8
154 for n32.
155 (MIPS_REGS_HAVE_STACK_HOME_P): Define as 0 for n32.
156
157 Mon May 8 00:49:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
158
159 * procfs.c (PROCFS_TRACE): Delete definition.
160 * proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always
161 define.
162
163 2000-05-05 Michael Snyder <msnyder@seadog.cygnus.com>
164
165 * procfs.c: Cleanup of procfs tracing. Move defines and
166 prototypes to proc-utils.h
167 * proc-utils.h: Define tracing macros. Declare trace functions.
168 * proc-api.c: Make procfs tracing a runtime option.
169 (prepare_to_trace): New function, abstracted out of several
170 places. Open a trace file if one is required.
171 (ioctl_with_trace, write_with_trace, open_with_trace,
172 close_with_trace, wait_with_trace, lseek_with_trace):
173 Report errno if an error occurs in a system call.
174 (write_with_trace): Make 2nd arg void *, to agree with write.
175
176 2000-05-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
177
178 * elfread.c (elf_symtab_read): The calculation of 'offset'
179 must be done for each symbol, not just once. The index
180 used must be the index of the section where 'sym' resides,
181 not .text.
182
183 2000-05-05 Michael Snyder <msnyder@seadog.cygnus.com>
184
185 * procfs.c (many functions): change int cmd; to long cmd;
186 Solaris /proc API calls this parameter a long, and requires it
187 for 64-bit hosts (where sizeof(long) != sizeof(int)). UnixWare
188 calls it an int, but on existing UnixWare hosts, int and long
189 are the same size. So long it must be. If a future UnixWare
190 version has problems with this, we'll have to use autoconf.
191 * proc-api.c (write_with_trace): use long instead of int.
192
193 2000-05-04 Mark Kettenis <kettenis@gnu.org>
194
195 * i386-linux-nat.c: Define PT_READ_U and PT_WRITE_U if they're not
196 already defined.
197
198 2000-05-01 Mark Kettenis <kettenis@gnu.org>
199
200 * infrun.c (handle_inferior_event): Add missing call to keep_going
201 and missing return when handling an ordinary signal from the
202 inferior.
203
204 2000-05-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
205
206 * objfiles.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
207 SECT_OFF_RODATA): Define as functions of OBJFILE. Add
208 sect_index_text, sect_index_data, sect_index_rodata,
209 sect_index_bss to objfile structure.
210 * gdb-stabs.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
211 SECT_OFF_RODATA): Remove.
212 * objfiles.c (allocate_objfile): Initialize
213 sect_index_{text,data,bss,rodata} to -1, for error detection.
214
215 * symfile.c (default_symfile_offsets): Initialize
216 sect_index_{text,data,bss,rodata} from bfd information.
217 * xcoffread.c (xcoff_symfile_offsets): Ditto.
218 * somread.c (som_symfile_offsets): Initialize
219 sect_index_{text,data,bss,rodata}.
220
221 * coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c,
222 hp-symtab-read.c, hpread.c, mdebugread.c, minsyms.c,
223 mipsread.c, objfiles.c, os9kread.c, pa64solib.c, partial-stab.h,
224 remote-os9k.c, remote-vx.c, remote.c, rs6000-nat.c, somsolib.c,
225 stabsread.c, symfile.c, xcoffread.c:
226 Update use of SECT_OFF_{TEXT,DATA,BSS,RODATA} to depend on the
227 current objfile.
228
229 * xcoffread.c: Add new field objfile to find_targ_sec_arg.
230
231 Thu May 4 20:54:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
232
233 * config/mips/tm-mipsv4.h (Dest_Reg), config/mips/tm-irix5.h
234 (MIPS_NUM_ARG_REGS, Dest_Reg), config/mips/tm-mips.h
235 (MIPS_NUM_ARG_REGS), config/mips/tm-mips.h (MIPS_NUM_FP_ARG_REGS):
236 Delete unused macros.
237
238 2000-05-03 Michael Snyder <msnyder@seadog.cygnus.com>
239
240 * solib.c (elf_locate_base, info_sharedlibrary_command):
241 Look at the bfd to determine if it is elf32 or elf64, rather
242 than using an ifdef. This makes it runtime teststable and
243 multi-arch.
244
245 2000-05-01 Mark Kettenis <kettenis@gnu.org>
246
247 * infrun.c (handle_inferior_event): When doing a "next", and
248 stepping out of a signal handler into its calling trampoline
249 ignore the value of step_frame_address.
250 (step_over_function): Only modify step_resume_breakpoint->frame if
251 the value of step_frame_address is non-zero.
252
253 2000-05-03 Michael Snyder <msnyder@seadog.cygnus.com>
254
255 * monitor.c (monitor_fetch_register): MAX_REGISTER_RAW_SIZE
256 is not static in the MULTI_ARCH world, so don't use it in a
257 static array declaration.
258
259 2000-05-03 Elena Zannoni <ezannoni@makita.cygnus.com>
260
261 * symtab.c (in_prologue): From Jim Blandy. Rewrite, more
262 intelligently, making sure we use the information from the
263 symbol tables fully.
264
265 2000-05-02 H.J. Lu <hjl@gnu.org>
266
267 * ia64-tdep.c (ia64_gdbarch_init): Reference to ELFOSABI_NONE
268 instead of ELFOSABI_SYSV.
269
270 Tue May 2 19:07:20 2000 Andrew Cagney <cagney@b1.cygnus.com>
271
272 * gdbarch.sh (NPC_REGNUM, NNPC_REGNUM): Add.
273 * gdbarch.h, gdbarch.c: Re-generate.
274
275 * gdbserver/remote-utils.c (prepare_resume_reply): Change #ifdef
276 NPC_REGNUM to run-time test.
277 * findvar.c (generic_target_write_pc): Change #ifdef NPC_REGNUM
278 and NNPC_REGNUM to run-time test.
279 * procfs.c (procfs_fetch_registers): Change #ifdef NPC_REGNUM to
280 run-time test.
281 (procfs_store_registers): Ditto.
282
283 Tue May 2 18:48:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
284
285 * gdbarch.sh: Provide non- multi-arch defaults by direct
286 definition in "gdbarch.h" instead of going through "gdbarch.c".
287 * gdbarch.h, gdbarch.c: Re-generate.
288 * defs.h: When non- multi-arch, include "arch-utils.h" so that
289 legacy definitions are globally visible.
290
291 Tue May 2 16:32:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
292
293 * MAINTAINERS: Add Syd Polk to gdbtk maintainers.
294 (symtabs): Add Elena to symtabs maintainers list.
295 (Blanket Write Privs): Add Jim Blandy.
296
297 2000-05-01 Stan Shebs <shebs@apple.com>
298
299 Remove obsolete Gould configuration:
300 * configure.host, configure.tgt: Remove Gould configs.
301 * Makefile.in: Remove Gould-related actions.
302 * gould-xdep.c, gould-tdep.c, config/gould/*: Remove files.
303 * NEWS: Mention removal.
304
305 Mon May 1 15:37:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
306
307 From 2000-04-28 Andreas Jaeger <aj@suse.de>:
308 * defs.h: Properly check for GCC version number.
309
310 2000-04-30 Mark Kettenis <kettenis@gnu.org>
311
312 Fix single-stepping out of signal trampolines.
313 * config/i386/nm-linux.h (CHILD_RESUME): Define.
314 * i386-linux-nat.c (child_resume): New function.
315
316 Fri Apr 28 16:22:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
317
318 * blockframe.c (frameless_look_for_prologue): Use
319 PROLOG_FRAMELESS_P instead of SKIP_PROLOGUE_FRAMELESS_P.
320 * gdbarch.sh (PROLOG_FRAMELESS_P): Define.
321 * gdbarch.h, gdbarch.c: Re-generate.
322 * arch-utils.h, arch-utils.c (generic_prologue_frameless_p): New
323 function.
324
325 Fri Apr 28 15:31:10 2000 Andrew Cagney <cagney@b1.cygnus.com>
326
327 From "Serge Nikulin" <nikulin@actsw.amat.com>:
328 * m68k-tdep.c (delta68_in_sigtramp): Return 0 when the function
329 name is unknow.
330
331 2000-04-27 Michael Snyder <msnyder@seadog.cygnus.com>
332
333 * gdbarch.sh (d10v_daddr_p, d10v_iaddr_p, d10v_convert_daddr_to_raw,
334 d10v_convert_iaddr_to_raw): make these multi-arch functions optional.
335 * gdbarch.c, gdbarch.h: regenerate
336
337 Fri Apr 28 12:21:28 2000 Andrew Cagney <cagney@b1.cygnus.com>
338
339 From Tim Mooney <mooney@dogbert.cc.ndsu.nodak.edu>:
340 * target.c (do_monitor_command): Cast tcomplain to correct
341 function type in comparison.
342
343 Fri Apr 28 11:43:05 2000 Andrew Cagney <cagney@b1.cygnus.com>
344
345 From 2000-04-25 Guy Harris <guy@netapp.com>:
346 * config/alpha/alpha-osf3.mh (XDEPFILES): Add ser-tcp.o and
347 ser-pipe.o
348
349 2000-04-27 Michael Snyder <msnyder@seadog.cygnus.com>
350
351 * jv-valprint.c (java_val_print): Add arg declaration,
352 fix compiler warning.
353 * corelow.c (core_open): Call set_gdbarch_from_file so that
354 gdbarch becomes aware of the architecture encoded in the
355 corefile.
356 * findvar.c (write_register_gen): Export this useful interface.
357 * value.h (write_register_gen): Declare.
358
359 2000-04-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
360
361 * cxux-nat.c (add_shared_symbol_files): Don't treat .text section
362 as special in the section_addr_info structure.
363 * pa64solib.c (pa64_solib_add_solib_objfile): Ditto.
364 * osfsolib.c (symbol_add_stub): Ditto.
365 * irix5-nat.c (symbol_add_stub): Ditto.
366
367 Thu Apr 27 14:07:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
368
369 * mips-tdep.c, d10v-tdep.c: Include "arch-utils.h".
370
371 Thu Apr 27 10:06:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
372
373 * TODO: Document IRIX X ARM cross compile problems.
374
375 2000-04-26 Michael Snyder <msnyder@seadog.cygnus.com>
376
377 * utils.c (internal_verror): Call target_terminal_ours.
378 * wrapper.h: Fix minor comment typo.
379 * proc-api.c (write_with_trace): Change 'arg' from long to int.
380 Treat 'off_t' and 'size_t' as unsigned long in printfs.
381 (lseek_with_trace): Treat 'off_t' as unsigned long in printf.
382 * procfs.c (comments): Eliminate "???" in comments, which GCC
383 wants to interpret as a trigraph. (fill_gregset, supply_gregset,
384 fill_fpregset, supply_fpregset): Declare.
385 (procfs_wait): Sysargs is a long, change printf format to match.
386 (test-mapping, mapping_test, test_mapping_cmd) Remove (test only).
387
388 2000-04-26 Kevin Buettner <kevinb@redhat.com>
389
390 * config/djgpp/fnchange.lst (ia64-linux-nat.c): Map to
391 ia64linux-nat.c.
392
393 Wed Apr 26 13:50:35 2000 Philippe De Muyter <phdm@macqel.be>
394
395 * ax-gdb.c (agent_command): Remove now useless cast of
396 `free_current_contents' when passed to `make_cleanup'.
397 * coffread.c (coff_symfile_read): Ditto.
398 * dwarf2read.c (dwarf2_add_member_fn, read_array_type): Ditto.
399 (dwarf_decode_lines): Ditto.
400 * eval.c (parse_and_eval_address, parse_and_eval_address_1): Ditto.
401 (parse_and_eval, parse_to_comma_and_eval): Ditto.
402 * parse.c (parse_exp_1): Ditto.
403 * printcmd.c (print_command_1, output_command, set_command): Ditto.
404 (x_command, print_frame_args, printf_command): Ditto.
405 * top.c (execute_control_command): Ditto.
406 * tracepoint.c (validate_actionline): Ditto.
407 * typeprint.c (whatis_exp, ptype_command): Ditto.
408 (maintenance_print_type): Ditto.
409
410 2000-04-26 Kevin Buettner <kevinb@redhat.com>
411
412 * Makefile.in (ALLDEPFILES): Add ia64-linux-tdep.c.
413 (ia64-linux-tdep.o): Add dependencies.
414 (ia64-tdep.o): Add dependency for arch-utils.h.
415 * ia64-linux-tdep.c, ia64-tdep.c (arch-utils.h): Include.
416
417 2000-04-25 Michael Snyder <msnyder@seadog.cygnus.com>
418
419 * blockframe.c: Fix a minor typo in a comment.
420
421 2000-04-25 Kevin Buettner <kevinb@redhat.com>
422
423 * ia64-tdep.c (examine_prologue): Recognize store instructions;
424 those whose source operands are input registers which haven't
425 been seen before are considered to be part of the prologue.
426
427 Tue Apr 25 13:51:58 2000 glen mccready <gkm@pobox.com>
428
429 * rs6000-nat.c (xcoff_relocate_symtam): Recover from the wrong
430 patch being applied `Fri Apr 7 13:44:38 2000'.
431
432 2000-04-24 Kevin Buettner <kevinb@redhat.com>
433
434 * ia64-linux-tdep.c: New file.
435 * ia64-tdep.c (elf-bfd.h): Include.
436 (ia64_linux_sigcontext_register_address): New extern declaration.
437 (struct gdbarch_tdep): New struct.
438 (SIGCONTEXT_REGISTER_ADDRESS): New define.
439 (read_sigcontext_register): New static function.
440 (extract_bit_field, replace_bit_field, slotN_contents,
441 replace_slotN_contents): Made static.
442 (ia64_frame_chain, ia64_frame_saved_pc, ia64_init_extra_frame_info):
443 Added new code for signal handler frames and call dummy frames.
444 (ia64_frame_init_saved_regs): Handle signal handler frames.
445 (ia64_find_saved_register): Removed.
446 (ia64_get_saved_register): Handle call dummy frames; reorganized
447 to call generic_get_saved_register() to find registers saved
448 in previous frames.
449 (process_note_abi_tag_sections): New static function.
450 (ia64_gdbarch_init): Attempt to determine the ABI/OS of the
451 executable. Based upon this information, set target dependent
452 field sigcontext_register_address appropriately. Also set
453 FRAME_CHAIN_VALID to be generic_func_frame_chain_valid.
454 * config/ia64/linux.mt (TDEPFILES): Add ia64-linux-tdep.o.
455 * config/ia64/tm-linux.h (IN_SIGTRAMP): Define.
456 (ia64_linux_in_sigtramp): New declaration.
457
458 2000-04-23 Eli Zaretskii <eliz@is.elta.co.il>
459
460 * TODO, NEWS: Update due to inclusion of gdbmi.texinfo in the GDB
461 manual.
462
463 2000-04-23 Eli Zaretskii <eliz@is.elta.co.il>
464
465 * config/djgpp/README: Explain how to unpack using djunpack.bat.
466
467 Fri Apr 21 15:23:13 2000 Andrew Cagney <cagney@b1.cygnus.com>
468
469 * stabsread.c (REG_STRUCT_HAS_ADDR): Delete default.
470 (define_symbol): Check REG_STRUCT_HAS_ADDR_P before using
471 REG_STRUCT_HAS_ADDR.
472 (define_symbol): Ditto.
473
474 * valops.c (hand_function_call): Replace #ifdef
475 REG_STRUCT_HAS_ADDR with if REG_STRUCT_HAS_ADDR_P. Re-indent
476 affected code.
477
478 * gdbarch.sh (REG_STRUCT_HAS_ADDR): Add along with the predicate
479 function REG_STRUCT_HAS_ADDR_P.
480 * gdbarch.h, gdbarch.c: Re-generate.
481
482 2000-04-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
483
484 * gdb-stabs.h (SECT_OFF_MAX): Increase to 40.
485
486 2000-04-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
487
488 * win32-nat.c (handle_load_dll): Don't treat .text as a special
489 section anymore.
490 * somread.c (som_symfile_offsets): Ditto.
491 * somsolib.c (som_solib_add_solib_objfile): Ditto.
492
493 Fri Apr 21 16:14:38 2000 Andrew Cagney <cagney@b1.cygnus.com>
494
495 * MAINTAINERS: Make Jimmy Guo TUI maintainer.
496
497 Fri Apr 21 14:37:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
498
499 * command.h (help_all): Delete declaration.
500 * command.c (help_all): Add declaration. Convert function
501 argument list to ISO-C.
502
503 Thu Apr 20 18:15:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
504
505 * d10v-tdep.c (d10v_gdbarch_init): Initialize stack_align.
506 (d10v_stack_align): Make static.
507 * config/d10v/tm-d10v.h (STACK_ALIGN): Delete.
508
509 Thu Apr 20 14:35:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
510
511 * valops.c (hand_function_call): Replace #ifdef STACK_ALIGN with
512 run-time test for STACK_ALIGN_P.
513 * gdbarch.sh: Add support for function and variable predicates.
514 (STACK_ALIGN): Add. Implement with predicate - STACK_ALIGN_P.
515 * gdbarch.h, gdbarch.c: Re-generate.
516
517 Thu Apr 20 17:39:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
518
519 * defs.h, utils.c (free_current_contents): Change parameter to
520 void*.
521
522 From Philippe De Muyter <phdm@macqel.be>:
523 * printcmd.c (print_address_symbolic): Call `make_cleanup' with
524 `(free_current_contents, &x)', not `(free, x)'.
525 * utils.c (free_current_contents): Do not `free (NULL)'.
526
527 * printcmd.c (print_address_symbolic): Cleanup after a failed
528 call to build_address_symbolic.
529
530 2000-04-20 Christopher Faylor <cgf@cygnus.com>
531
532 * wince-stub.c (FREE): New macro.
533 (mempool): Just free any buffer prior to reuse. Don't bother with
534 realloc.
535 (flag_single_step): New function.
536 (skip_message): Detect "helpful" Windows CE messages and skip sending
537 them to the host.
538 (wait_for_debug_event): Use skip_message to avoid sending debug
539 messages to the host.
540 (dispatch): Prelimary implementation of single step detection.
541 * wince.c: Rework SH single stepping code to be more consistent with
542 other wince targets.
543 (handle_output_debug_string): Allow first chance exceptions to come
544 through since they seem to be all that we get on some versions of
545 Windows CE.
546 (check_for_step): New function, conditionally compiled based on target.
547 (regptr): Delete obsolete function.
548 (handle_exception): Detect illegal instructions.
549 (get_child_debug_event): Return success only if event code matches
550 target.
551 (child_create_inferior): Reflect change to get_child_debug_event
552 arguments.
553
554 2000-04-20 Christopher Faylor <cgf@cygnus.com>
555
556 * win32-nat.c (thread_rec): Be more defensive about suspending already
557 suspended threads.
558 (safe_symbol_file_add_stub): New function.
559 (safe_symbole_file_add_cleanup): New function.
560 (safe_symbol_file_add): New function.
561 (handle_load_dll): Use wrapper to add DLL symbol information to avoid
562 bogus errors from non-stabs DLLs.
563 (handle_exception): Add work around for detection of first exception
564 breakpoint which does not seem to occur on W2K. Detect more "signals"
565 that can be effectively passed to the debuggee. Reorganize to eliminate
566 continue_status global.
567 (child_continue): Reorganize to eliminate continue_status global.
568 (child_wait): Ditto.
569 (child_resume): Ditto.
570 (get_child_debug_event): Ditto. Recognize when an a breakpoint
571 exception should be ignored. Change method for signalling when an
572 important event has occured to the caller.
573 (child_create_inferior): Use new method for noticing when
574 get_child_debug_event has found something interesting.
575
576 Fri Apr 7 13:44:38 2000 glen mccready <gkm@pobox.com>
577
578 * rs6000-nat.c (xcoff_relocate_symtab): Grow buffer if ptrace()
579 fails due to lack of space.
580
581 Fri Mar 24 12:10:38 2000 glen mccready <gkm@pobox.com>
582
583 * command.c, command.h (help_all): Add functionality to display
584 a complete listing of available commands.
585
586 2000-04-20 Scott Bambrough <scottb@netwinder.org>
587
588 * arm-linux-nat.c (PIDGET, TIDGET): New.
589 (get_thread_id, GET_THREAD_ID): New.
590 (fetch_nwfpe_register, store_nwfpe_register): New.
591 (fetch_register, store_register): New.
592 (fetch_fpregister, store_fpregister): New.
593 (fill_gregset, supply_gregset): New.
594 (fill_fpregset, supply_fpregset): New.
595 (fetch_fpregs): Modified to use thread id's.
596 (store_fpregs): Modified to use thread id's and
597 fetch_nwfpe_register.
598 (fetch_regs): Modified to use thread id's.
599 (store_regs): Modified to use thread id's.
600 (fetch_inferior_registers): Modified to handle single register
601 fetches.
602 (store_inferior_registers): Modified to handle single register
603 stores.
604 (arm_linux_register_u_addr): Removed.
605
606 * configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
607
608 * config/arm/linux.mh
609 (NATDEPFILES): Removed core-aout.o. Added core-regset.o.
610 (LOADLIBES): Define.
611
612 * config/arm/nm-linux.h: Include config/nm-linux.h.
613 (ATTACH_DETACH): Removed. Defined in config/nm-linux.h.
614 (REGISTER_U_ADDR): Removed.
615 (SVR4_SHARED_LIBS): Removed. Defined in config/nm-linux.h.
616 (#include "solib.h"): Removed. Included via config/nm-linux.h.
617
618 Thu Apr 20 18:54:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
619
620 From Daniel Berlin <dan@cgsoftware.com> and Tim Mooney
621 <mooney@dogbert.cc.ndsu.nodak.edu>:
622 * infrun.c (follow_fork_mode_kind_names): NULL terminate
623 array. Re-indent.
624 (scheduler_enums): Ditto.
625
626 Mon Apr 17 13:37:10 2000 Andrew Cagney <cagney@b1.cygnus.com>
627
628 * gdbarch.sh: Make multi-arch variable defaults, defaults for non-
629 multi-arch targets.
630 (TARGET_BFD_VMA_BIT, IEEE_FLOAT, CALL_DUMMY_WORDS,
631 SIZEOF_CALL_DUMMY_WORDS): Update.
632
633 * inferior.h (CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Default
634 provided by gdbarch.
635 (CALL_DUMMY_P): Add FIXME. gdbarch should provide default.
636
637 * valprint.c (IEEE_FLOAT): Default provided by gdbarch.
638
639 2000-04-19 Jim Blandy <jimb@redhat.com>
640
641 Bring RETURN_VALUE_ON_STACK under gdbarch's control.
642 * gdbarch.sh (RETURN_VALUE_ON_STACK): New entry.
643 * gdbarch.c, gdbarch.h: Regenerated.
644 * arch-utils.c (default_return_value_on_stack): New function.
645 * arch-utils.h (default_return_value_on_stack): New declaration.
646 * values.c (RETURN_VALUE_ON_STACK): Delete default definition.
647
648 * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
649 two-dimensional array, instead of faking it with explicit index
650 arithmetic.
651
652 * minsyms.c (prim_record_minimal_symbol_and_info): Doc fix.
653 (Thanks to Guy Harris.)
654
655 2000-04-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
656
657 * xcoffsolib.c (solib_add): Fix call to vmap_symtab().
658
659 2000-04-19 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
660
661 * TODO: Update.
662
663 Wed Apr 19 19:10:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
664
665 * TODO: Document -Wreturn-type problem.
666
667 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
668
669 * maint.c (_initialize_maint_cmds): Add `mt i' alias for `mt info'.
670
671 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
672
673 * infcmd.c (_initialize_infcmd): Add `info r' alias for
674 `info registers'.
675
676 Wed Apr 19 17:03:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
677
678 From Philippe De Muyter <phdm@macqel.be>:
679 * bcache.c (free_bcache): Do not free NULL.
680
681 Wed Apr 19 16:37:47 2000 Andrew Cagney <cagney@b1.cygnus.com>
682
683 * TODO: Cleanup.
684 * NEWS: Update GDB version. Duplicate paragraph explaining
685 obsolete.
686
687 Wed Apr 19 13:06:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
688
689 * Makefile.in (distclean): Delete tui/Makefile.
690 * TODO: Add deletion of tui/Makefile.in to list.
691
692 2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
693
694 * symfile.h (struct section_addr_info ): Remove fields for special
695 treatment of .text, .data and .bss sections.
696
697 * solib.c (symbol_add_stub): The special field text_addr is not
698 available anymore. Search for the .text field the hard way.
699
700 * symfile.c (build_section_addr_info_from_section_table): Don't
701 fill in {text, data, bss}_addr any more.
702 (default_symfile_offsets): Don't use {text, data, bss}_addr fields
703 to fill in section_offsets for objfile.
704 (syms_from_objfile): Don't deal with {text, data, bss}_addr as a
705 special case anymore.
706 (add_symbol_file_command): Ditto.
707
708 2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
709
710 symfile.c: (symbol_file_command): Remove support for rombug, to
711 simplify code.
712
713 2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
714
715 * symfile.c (add_symbol_file_command): Rewrite the arguments
716 processing part. Simplify syntax of command. Remove support for
717 rombug.
718 (_initialize_symfile): Update help message for add-symbol-file
719 command.
720
721 Mon Apr 17 15:53:38 2000 Andrew Cagney <cagney@b1.cygnus.com>
722
723 * gdbarch.sh (IEEE_FLOAT): Only dump when defined.
724 * gdbarch.h, gdbarch.c: Re-generate.
725
726 Mon Apr 17 11:26:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
727
728 * remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
729 (MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
730 (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
731 gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
732 FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
733 REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
734 REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
735 ADDRESS_TO_POINTER): Delete default definition. Handled by
736 gdbarch.
737
738 * gdbarch.sh: Make multi-arch defaults, defaults for non-
739 multi-arch targets.
740 (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
741 REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
742 D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
743 MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
744 REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
745 Provide default/legacy implementation.
746 (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
747 * gdbarch.h, gdbarch.c: Re-generate.
748
749 2000-04-16 Jim Blandy <jimb@redhat.com>
750
751 * findvar.c (store_typed_address, extract_typed_address): Fix
752 function names in error messages.
753
754 2000-04-16 Eli Zaretskii <eliz@is.elta.co.il>
755
756 * config/djgpp/config.sed: Fix the lines which edit clean: and
757 uninstall-info: targets.
758
759 2000-04-14 Jim Blandy <jimb@redhat.com>
760
761 Bring IEEE_FLOAT under gdbarch's control.
762 * gdbarch.sh (IEEE_FLOAT): New entry.
763 * gdbarch.c, gdbarch.h: Regenerated.
764 * valprint.c (IEEE_FLOAT): Provide a default #definition for this.
765 (print_floating): Use IEEE_FLOAT as if it were an expression; use
766 the code specific to IEEE-format numbers whenever the value of
767 IEEE_FLOAT is non-zero.
768 * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
769 config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
770 config/h8300/tm-h8300.h, config/i386/tm-i386.h,
771 config/i960/tm-i960.h, config/m88k/tm-m88k.h,
772 config/mips/tm-mips.h, config/pa/tm-hppa.h,
773 config/sparc/tm-sparc.h, config/delta/tm-delta.h,
774 config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
775 IEEE_FLOAT, make sure they give it the value (1).
776
777 Provide the hooks needed to support architectures on which
778 pointers are not always simple byte addresses.
779
780 * gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
781 functions which architectures can redefine, defaulting to
782 generic_pointer_to_address and generic_address_to_pointer.
783 * findvar.c (extract_typed_address, store_typed_address,
784 generic_pointer_to_address, generic_address_to_pointer): New
785 functions.
786 (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
787 definitions.
788 (extract_address, store_address): Doc fixes.
789 * values.c (value_as_pointer): Doc fix.
790 (value_from_pointer): New function.
791 * defs.h (extract_typed_address, store_typed_address): New
792 declarations.
793 * inferior.h (generic_address_to_pointer,
794 generic_pointer_to_address): New declarations.
795 * value.h (value_from_pointer): New declaration.
796
797 The following changes are all of the general form "Use these
798 functions instead of these other functions." In each case, the
799 change is because the new calls provide enough information to do
800 the appropriate address / pointer conversions, where the old calls
801 did not, or because the new functions are more appropriately named
802 for the operation being performed.
803
804 * ax-gdb.c (const_var_ref): Use value_from_pointer, not
805 value_from_longest.
806 * blockframe.c (generic_push_dummy_frame): Use read_pc and
807 read_sp, not read_register.
808 * c-valprint.c (c_val_print): Use extract_typed_address instead of
809 extract_address to extract vtable entries and references.
810 * cp-valprint.c (cp_print_value_fields): Use value_from_pointer
811 instead of value_from_longest to extract the vtable's address.
812 * eval.c (evaluate_subexp_standard): Use value_from_pointer
813 instead of value_from_longest to compute `this', and for doing
814 pointer-to-member dereferencing.
815 * findvar.c (read_register): Use extract_unsigned_integer, not
816 extract_address.
817 (read_var_value): Use store_typed_address instead of store_address
818 for building label values.
819 (locate_var_value): Use value_from_pointer instead of
820 value_from_longest.
821 * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
822 instead of value_from_longest, to build arguments to __d_shl_get.
823 * printcmd.c (set_next_address): Use value_from_pointer, not
824 value_from_longest.
825 (x_command): Use value_from_pointer, not value_from_longest.
826 * tracepoint.c (set_traceframe_context): Use value_from_pointer,
827 not value_from_longest.
828 * valarith.c (value_add, value_sub): Use value_from_pointer, not
829 value_from_longest.
830 * valops.c (find_function_in_inferior, value_coerce_array,
831 value_coerce_function, value_addr, hand_function_call): Same.
832 * value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
833 * values.c (unpack_long): Use extract_typed_address to produce
834 addresses from pointers and references, not extract_address.
835 (value_from_longest): Use store_typed_address instead of
836 store_address to produce pointer and reference values.
837
838 2000-04-13 Mark Kettenis <kettenis@gnu.org>
839
840 * acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
841 HAVE_PSADDR_T): Add them here instead of in config.in.
842
843 * acconfig.h (PRFPREGSET_T_BROKEN): New define.
844 * configure.in: Add check for broken prfpregset_t type.
845 * lin-thread.c (gdb_prfpregset): New typedef, depends on
846 definition of PRFPREGSET_T_BROKEN.
847 (ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
848 p_td_thr_setfpregs, thread_db_fetch_registers,
849 thread_db_store_registers): Use gdb_prfpregset_t instead of
850 prfpregset_t.
851 * config.in: Regenerated.
852 * configure: Regenerated.
853
854 2000-04-13 DJ Delorie <dj@cygnus.com>
855
856 * mips-tdep.c (do_fp_register_row): copy the number of bytes
857 allocated, not the size of the pointer.
858
859 2000-04-13 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
860
861 * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Define.
862 * config/i386/tm-i386sol2.h (HAVE_I387_REGS): Define.
863 * i386v4-nat.c (supply_fpregset, fill_fpregset): Add code
864 to handle floating point registers if NUM_FREGS is not zero.
865
866 2000-04-13 Nick Duffek <nsd@cygnus.com>
867
868 * sol-thread.c (init_sol_core_ops): Initialize to_thread_alive
869 and document to_find_new_threads bug.
870
871 2000-04-13 Eli Zaretskii <eliz@is.elta.co.il>
872
873 * infrun.c (proceed, normal_stop): Change the error message about
874 failure to insert breakpoints/watchpoints so that it makes sense
875 even if ptrace is not used or no other processes can be active.
876
877 Thu Apr 13 13:24:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
878
879 * configure.in: Add --enable-maintainer-mode.
880 * aclocal.m4, configure: Re-generate.
881
882 * Makefile.in ($(srcdir)/copying.c): Enable dependencies only when
883 on maintainer-mode. Update copying.c in source directory.
884 (copying.txt): Delete rule.
885 (copying.o): Add explict paths to $(srcdir) and explicit make
886 rule.
887
888 2000-04-12 Kevin Buettner <kevinb@redhat.com>
889
890 * ia64-linux-nat.c (IA64_PSR_DB, IA64_PSR_DD): Define.
891 (fetch_debug_register, fetch_debug_register_pair,
892 store_debug_register, store_debug_register_pair, is_power_of_2,
893 enable_watchpoints_in_psr, ia64_linux_insert_watchpoint,
894 ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
895 New functions.
896 * config/ia64/nm-linux.h (TARGET_HAS_HARDWARE_WATCHPOINTS,
897 TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
898 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
899 target_remove_watchpoint): Define.
900 (ia64_linux_stopped_by_watchpoint, ia64_linux_insert_watchpoint,
901 ia64_linux_remove_watchpoint): Declare.
902
903 2000-04-12 Eli Zaretskii <eliz@is.elta.co.il>
904
905 * go32-nat.c (go32_insert_hw_breakpoint): When there are no more
906 hardware breakpoint resources, return EBUSY.
907 (go32_handle_nonaligned_watchpoint): If the argument WHAT is not
908 one of the enumerated values, return EINVAL.
909
910 2000-04-12 Eli Zaretskii <eliz@is.elta.co.il>
911
912 * README: Mention special build instructions for DJGPP.
913 * NEWS: Update with FP features on x87 platforms, and
914 DJGPP-related changes.
915
916 2000-04-12 Eli Zaretskii <eliz@is.elta.co.il>
917
918 * top.c (gdb_completer_file_name_break_characters): New variable.
919 (line_completion_function): When completing on file names, use
920 gdb_completer_file_name_break_characters as word break
921 characters for the readline library.
922
923 2000-04-12 Mark Kettenis <kettenis@gnu.org>
924
925 * i387-tdep.c (print_i387_value): Avoid call to
926 floatformat_to_doublest if long double type is the same on host
927 and target.
928
929 2000-04-11 Fernando Nasser <fnasser@cygnus.com>
930
931 * wrapper.h: Remove definitions of internal functions.
932 * wrapper.c: Remove definitions of exported functions (which are
933 already in wrapper.h) and make static all internal wrap_* functions.
934
935 Mon Apr 10 21:58:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
936
937 * acconfig.h (USE_INCLUDED_REGEX): Add.
938 * Makefile.in (REGEX_CFLAGS): Delete
939 * configure.in (REGEX_CFLAGS): Delete. Use AC_DEFINE instead.
940 * configure, config.in: Re-generate.
941
942 2000-04-10 Philip Blundell <philb@gnu.org>
943
944 * arm-linux-nat.c (arm_skip_solib_resolver): Remove and move to
945 arm-linux-tdep.c.
946 * arm-linux-tdep.c (arm_skip_solib_resolver): New.
947
948 2000-04-10 Fernando Nasser <fnasser@cygnus.com>
949
950 From 2000-04-10 Rodney Brown <rdb@redhat.com>:
951 * command.h (enum command_class): Remove trailing "," to placate
952 AIX xlc.
953
954 Mon Apr 10 20:17:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
955
956 * TODO, NEWS: Update. Mention MI.
957
958 Mon Apr 10 00:21:09 2000 Andrew Cagney <cagney@b1.cygnus.com>
959
960 * gdbarch-utils.h, gdbarch-utils.c: Delete.
961 * arch-utils.h, arch-utils.c: New files. Avoid 14 character file
962 name problems.
963 * Makefile.in: Update.
964 * gdbarch.c: Update.
965
966 Sun Apr 9 23:42:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
967
968 From 2000-04-07 Jonathan Larmour <jlarmour@redhat.co.uk>:
969 * mips-tdep.c (saved_gpreg_size_enums): Define enum command for
970 new "set mips saved-gpreg-size" command
971 (MIPS_SAVED_REGSIZE): Now a function mips_saved_regsize()
972 (MIPS_DEFAULT_SAVED_REGSIZE): Define for default MIPS_SAVED_REGSIZE,
973 either from target, or gdb multi-arch
974 (show_mips_command): New. For "show mips" prefix command
975 (set_mips_command): New. For "show mips" prefix command
976 (_initialize_mips_tdep): Add top-level mips prefix command
977 Add "set mips saved-gpreg-size" command
978
979 * mips-tdep.c (struct gdbarch_tdep): Rename mips_saved_regsize to
980 mips_default_saved_regsize.
981 (mips_gdbarch_init): Update.
982 (MIPS_DEFAULT_SAVED_REGSIZE): Update.
983 (mips_gdbarch_init): Use MIPS_REGSIZE as the default value for
984 mips_default_saved_regsize.
985
986 Sun Apr 9 23:27:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
987
988 From 2000-04-07 J.T. Conklin <jtc@redback.com>:
989 * lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
990 replace calls to target_xfer_memory() with target_read_memory()
991 and target_write_memory().
992
993 Sun Apr 9 22:54:29 2000 Andrew Cagney <cagney@b1.cygnus.com>
994
995 * valops.c (value_rtti_type): Compare VALUE_ADDRESS with ``0'' not
996 NULL. Macro returns a CORE_ADDR.
997
998 2000-04-08 Jim Blandy <jimb@redhat.com>
999
1000 * dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
1001 Don't include "bfd-elf.h".
1002 (address_significant_size): Delete variable.
1003 (dwarf2_build_psymtabs_hard): Don't set it, or check for
1004 consistency between it and the Dwarf 2 compilation unit header
1005 address size.
1006 (read_address): Don't mask off bits above
1007 address_significant_size.
1008 * Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
1009 (elf_bfd_h): Remove variable; it's no longer used.
1010
1011 2000-04-08 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1012
1013 * configure.in (NEW_PROC_API): Escape square brackets when testing
1014 for solaris2.[678].
1015 * configure: Regenerate.
1016
1017 2000-04-07 Scott Bambrough <scottb@netwinder.org>
1018
1019 * ChangeLog: Correct date on last entry.
1020 * arm-linux-tdep.c (arm_linux_push_arguments): New function.
1021 * config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
1022 * config/arm/tm-embed: Fix build warning from redefinition of
1023 LOWEST_PC.
1024 * config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
1025 * config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
1026 TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
1027 override default in tm-arm.h. Use default target byte order
1028 from tm-arm.h.
1029
1030 2000-04-07 Scott Bambrough <scottb@netwinder.org>
1031
1032 * Makefile.in: Add dependency information for arm-linux-tdep.c.
1033 * config/djgpp/fnchange.lst: Add arm-linux-tdep.c, arm-linux-nat.c.
1034
1035 2000-04-07 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1036
1037 * sol-thread.c (gdb_ps_addr_t): New typedef, depends on definition
1038 of PROC_SERVICE_IS_OLD.
1039 (ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
1040 rw_common): Change argument type from psaddr_t to gdb_ps_addr_t.
1041
1042 Fri Apr 7 17:18:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
1043
1044 * Makefile.in (CFLAGS): Set using configure.
1045
1046 * configure.in (WARN_CFLAGS): Enable by default when GCC.
1047 * configure: Re-generate.
1048
1049 Fri Apr 7 13:33:43 2000 Andrew Cagney <cagney@b1.cygnus.com>
1050
1051 From 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1052 * procfs.c (init_procfs_ops): Set procfs_ops.to_has_memory and
1053 procfs_ops.to_has_all_memory to 1.
1054
1055 * TODO: Update
1056
1057 2000-04-06 Nick Duffek <nsd@cygnus.com>
1058
1059 * configure.in (_MSE_INT_H): Define on Solaris 7.
1060 (NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
1061 * acconfig.h (_MSE_INT_H): Define on Solaris 7.
1062 * configure: Regenerate.
1063 * config.in: Regenerate.
1064
1065 2000-04-06 Michael Snyder <msnyder@cygnus.com>
1066
1067 * sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
1068 Change to rely on PIDGET etc.
1069 * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
1070 TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
1071 STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
1072 define. Allow target to use procfs hardware watchpoints.
1073 * config/sparc/nm-sun4sol2.h: ditto.
1074 * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
1075 definitions to use 16 bits for the pid, 15 bits for the tid, and
1076 1 bit for the flag.
1077 * config/sparc/tm-sun4sol2.h: ditto.
1078 (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
1079 * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
1080 for more than 15 thread increments.
1081
1082 2000-04-06 Eli Zaretskii <eliz@is.elta.co.il>
1083
1084 * top.c (filename_completer): Set subsequent_name to 1 early on,
1085 to prevent an infinite loop if the first file in the directory is
1086 a backup file (whose name ends in a `~').
1087
1088 2000-04-05 Jim Blandy <jimb@redhat.com>
1089
1090 * solib.c (update_solib_list): New function.
1091 (solib_add): Call update_solib_list, and then read symbols.
1092 (info_sharedlibrary_command): Call update_solib_list, not
1093 solib_add.
1094
1095 2000-04-05 Scott Bambrough <scottb@netwinder.org>
1096
1097 * arm-linux-tdep.c: Resolve implicit function declarations by
1098 including target.h and value.h. Inclusion of symtab.h is
1099 no longer needed.
1100
1101 2000-04-05 Scott Bambrough <scottb@netwinder.org>
1102
1103 * arm-linux-tdep.c: New file.
1104 * arm-linux-nat.c (fetch_fpregs): Remove unused code.
1105 (arm_get_longjmp_target): Moved it and all defines
1106 it uses to arm-linux-tdep.c.
1107 (arm_linux_extract_return_value): Moved to
1108 arm-linux-tdep.c.
1109 * config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
1110
1111 2000-04-04 Nick Duffek <nsd@cygnus.com>
1112
1113 * infrun.c (handle_inferior_event): Call target_mourn_inferior
1114 instead of kill_target.
1115
1116 2000-04-04 Daniel Berlin <dan@cgsoftware.com>
1117
1118 * TODO: Make note of various C++ things i have planned for 5.1.
1119
1120 Tue Apr 4 12:13:19 2000 Andrew Cagney <cagney@b1.cygnus.com>
1121
1122 * printcmd.c (print_scalar_formatted): Use local variable ptr_bit
1123 in shift. Stop GCC thinking it has a shift overflow.
1124
1125 2000-04-03 H.J. Lu <hjl@gnu.org>
1126
1127 * TODO: Remove the regex entry.
1128
1129 2000-04-03 H.J. Lu <hjl@gnu.org>
1130
1131 * gdb_regex.h: New. Include "regex.h" if USE_INCLUDED_REGEX
1132 is defined and <regex.h> otherwise.
1133
1134 * irix5-nat.c: Include "gdb_regex.h" instead of "gnu-regex.h".
1135 * monitor.c: Likewise.
1136 * osfsolib.c: Likewise.
1137 * solib.c: Likewise.
1138 * source.c: Likewise.
1139 * symtab.c: Likewise.
1140
1141 * Makefile.in (REGEX): Changed to @REGEX@.
1142 (REGEX_CFLAGS): New.
1143 (REGEX1): Removed.
1144 (ADD_DEPS): Use $(REGEX) instead of $(REGEX1).
1145 (INTERNAL_WARN_CFLAGS): Add $(REGEX_CFLAGS).
1146
1147 * configure.in (--with-included-regex): New switch.
1148 (REGEX): New. Subsstitue @REGEX@ in Makefile.in.
1149 (REGEX_CFLAGS): New. Subsstitue @REGEX_CFLAGS@ in Makefile.in.
1150 * configure: Regenerated.
1151
1152 2000-04-03 Kevin Buettner <kevinb@redhat.com>
1153
1154 * NEWS (powerpc-*-linux*): Mention.
1155
1156 2000-04-03 J.T. Conklin <jtc@redback.com>
1157
1158 * config/i386/xm-nbsd.h (HOST_LONG_DOUBLE_FORMAT): Define.
1159
1160 2000-04-03 Kevin Buettner <kevinb@redhat.com>
1161
1162 * Makefile.in (ALLDEPFILES): Add ia64-linux-nat.c and ia64-tdep.c.
1163 (ia64-linux-nat.o, ia64-tdep.o): Add dependencies.
1164
1165 * ia64-linux-nat.c (fill_gregset): Implement.
1166 (supply_fpregset, fill_fpregset): New functions.
1167
1168 * ia64-tdep.c (ia64_init_extra_frame_info): Revise manner in
1169 which the CFM is fetched for certain frames.
1170 (find_global_pointer, find_extant_func_descr): Don't use
1171 partial symtabs for locating sections.
1172
1173 * config/ia64/linux.mh (LOADLIBES): Define.
1174 (NATDEPFILES): Add linux-thread.o and lin-thread.o.
1175 * config/ia64/nm-linux.h (nm-linux.h): Include this upper-level
1176 file containing generic linux declarations/definitions.
1177 (SVR4_SHARED_LIBS, ATTACH_DETACH): Remove defines; already
1178 defined in generic nm-linux.h.
1179 (solib.h): Remove include; already included in generic nm-linux.h.
1180
1181 2000-04-03 Jim Blandy <jimb@redhat.com>
1182
1183 * solib.c (solib_add): Move all the code for loading symbol tables
1184 below the code to sort out additions and removals. That way, we
1185 always catch all loaded shared libraries whose symbols we haven't
1186 grabbed yet.
1187
1188 * solib.c (solib_add): Don't try to free a shared object's objfile
1189 if it doesn't have one. Duh.
1190
1191 * solib.c (solib_add): If a pattern was given, but it doesn't
1192 match any currently loaded shared libraries, print a message;
1193 don't just be silent.
1194
1195 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1196
1197 * go32-nat.c (go32_handle_nonaligned_watchpoint): Use a
1198 two-dimensional array instead of faking it with index
1199 arithmetics.
1200
1201 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1202
1203 * config/i386/xm-go32.h (HOST_LONG_DOUBLE_FORMAT): Define.
1204
1205 * config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
1206 definition (and use the common one in tm-i386.h).
1207 (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
1208 (I386_DJGPP_TARGET): Don't define, it's no longer required.
1209 (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
1210 i386-tdep.c defines it for all x86 targets.
1211 (LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
1212
1213 * config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
1214
1215 * config/djgpp/djcheck.sh: Edit the copyright year out of the test
1216 results. Fix editing of `main' arguments for non-GNU Sed.
1217
1218 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1219
1220 * symfile.c (map_overlay_command, unmap_overlay_command): Fix
1221 error message: there's no "overlay on" command.
1222
1223 2000-04-03 Eli Zaretskii <eliz@is.elta.co.il>
1224
1225 * Makefile.in (copying.c): Depend on copying.txt, not COPYING.
1226 (copying.txt): New target, a link to COPYING.
1227
1228 Mon Apr 3 18:20:03 2000 Andrew Cagney <cagney@b1.cygnus.com>
1229
1230 * TODO: Update.
1231
1232 Mon Apr 3 14:56:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
1233
1234 * top.c: Re-indent.
1235 (set_hook, error_hook): Remove PARAMS.
1236
1237 Mon Apr 3 14:45:25 2000 Andrew Cagney <cagney@b1.cygnus.com>
1238
1239 * symtab.h (add_minsym_to_demangled_hash_table): Revert 2000-03-29
1240 Daniel Berlin <dan@cgsoftware.com>. Function was static.
1241 * minsyms.c (add_minsym_to_demangled_hash_table): Add prototype.
1242
1243 Mon Apr 3 14:10:37 2000 Andrew Cagney <cagney@b1.cygnus.com>
1244
1245 * gdb-events.h, gdb-events.c, gdb-events.sh: Re-indent.
1246
1247 2000-04-02 Nick Duffek <nsd@cygnus.com>
1248
1249 * gdbtypes.c (safe_parse_type): New wrapper function to ignore
1250 error() during parse_and_eval_type().
1251 (check_stub_method): Call safe_parse_type instead of
1252 parse_and_eval_type().
1253 * wrapper.c (gdb_parse_and_eval_type): New wrapper function.
1254 (wrap_parse_and_eval_type): New support function.
1255 * wrapper.h (gdb_parse_and_eval_type): Prototype.
1256 (wrap_parse_and_eval_type): Prototype.
1257
1258 Sun Apr 2 10:32:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1259
1260 * MAINTAINERS: Eli Zaretskii is a doco maintainer.
1261
1262 Fri Mar 31 08:59:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
1263
1264 * gdbarch-utils.h, gdbarch-utils.c: New files.
1265 * Makefile.in (SFILES, COMMON_OBS): Update.
1266 (gdbarch_utils_h) Define.
1267 (gdbarch-utils.o): Add dependencies.
1268
1269 * gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
1270 handling default method values.
1271 (startup_gdbarch): Rename default_gdbarch, name misleading.
1272 (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
1273 (register_name): Default to legacy_register_name.
1274 (call_dummy_words): Default to legacy_call_dummy_words.
1275 (sizeof_call_dummy_words): Default to
1276 legacy_sizeof_call_dummy_words.
1277 (register_convertible): Default to
1278 generic_register_convertible_not.
1279 (breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
1280 (remote_translate_xfer_address): Default to
1281 generic_remote_translate_xfer_address.
1282 (frameless_function_invocation): Default to
1283 generic_frameless_function_invocation_not.
1284
1285 2000-04-02 Mark Kettenis <kettenis@gnu.org>
1286
1287 * i386-linux-nat.c: Add copyright notice.
1288
1289 * config/i386/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define as
1290 &floatformat_i387_ext.
1291 * config/i386/xm-i386gnu.h (HOST_LONG_DOUBLE_FORMAT): Likewise.
1292
1293 2000-03-29 Mark Kettenis <kettenis@gnu.org>
1294
1295 * findvar.c (extract_floating): Remove reference to
1296 TARGET_EXTRACT_FLOATING.
1297 (store_floating): Remove reference to TARGET_STORE_FLOATING.
1298
1299 2000-03-30 Fernando Nasser <fnasser@cygnus.com>
1300
1301 * wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
1302 Safe version of value_subscript.
1303 * varobj.c (): Use gdb_value_subscript() to get an array element value.
1304
1305 2000-03-30 Michael Snyder <msnyder@cleaver.cygnus.com>
1306
1307 * ui-file.c: Include "gdb_string.h"
1308 * cli-out.c: Include gdb_string.h to avoid compiler warnings.
1309 * wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into
1310 unions, since they are all used to hold both pointers and ints
1311 at various times. Casting pointer to int and vice versa gives
1312 warnings (and is not safe) if they are not the same size.
1313
1314 2000-03-30 Michael Snyder <msnyder@cleaver.cygnus.com>
1315
1316 * defs.h (struct continuation_arg): Make 'data' a union, to avoid
1317 casting problems when int and pointer are not the same size.
1318 * event-top.c (command_handler): Use data as a union.
1319 (command_line_handler_continuation): Ditto.
1320 * infcmd.c (step_1_continuation): Use data as a union. Re-indent.
1321 (step_once): ditto. (finish_command_continuation): Ditto.
1322 (finish_command): Ditto.
1323 * breakpoint.c (until_break_command): Use data as a union.
1324 (until_break_command_continuation): Ditto.
1325 * utils.c (add_intermediate_continuation): Fix typo in comment.
1326
1327 Thu Mar 30 12:09:50 2000 Andrew Cagney <cagney@b1.cygnus.com>
1328
1329 * gdbarch.h, gdbarch.c: Re-indent. Remove FIXMEs.
1330 * gdbarch.sh: Re-sync with gdbarch.[hc].
1331
1332 2000-03-29 Daniel Berlin <dan@cgsoftware.com>
1333
1334 * minsyms.c (add_minsym_to_demangled_hash_table): New function.
1335 (install_minimal_symbols): Fix demangled symbol problems caused by
1336 using add_minsym_to_hash_table for the demangled names, which is
1337 wrong. Now we use add_minsym_to_demangled_hash_table.
1338 (lookup_minimal_symbol): Fix problems with demangled symbol lookup
1339 caused by weird control flow.
1340 * symtab.h: Add add_minsym_to_demangled_hash_table prototype here.
1341
1342 2000-03-29 Jason Merrill <jason@casey.cygnus.com>
1343
1344 * configure.in: -linux-gnu*, not -linux-gnu.
1345
1346 Tue Mar 28 18:28:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
1347
1348 * remote.c (remote_threads_extra_info): Replace qfThreadExtraInfo
1349 with qThreadExtraInfo.
1350
1351 2000-03-29 J.T. Conklin <jtc@redback.com>
1352
1353 * i386nbsd-nat.c (fetch_core_registers): Make static.
1354
1355 * m68knbsd-nat.c (fetch_core_registers): Make static.
1356 (m68knbsd_core_fns, _initialize_m68knbsd_nat): Added.
1357
1358 Wed Mar 29 13:40:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
1359
1360 * TODO: Update GDB 5 status.
1361
1362 Wed Mar 29 10:16:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
1363
1364 * breakpoint.h (remove_hw_watchpoints): Add declaration.
1365 * breakpoints.c (remove_hw_watchpoints): Update.
1366 * maint.c (maintenance_do_deprecate): Avoid assignment within IF
1367 condition.
1368
1369 2000-03-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1370
1371 breakpoint.c, breakpoint.h (remove_hw_watchpoints): New function.
1372 infrun.c (resume): Remove hardware watchpoints before stepping
1373 when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
1374
1375 2000-03-28 Michael Snyder <msnyder@cleaver.cygnus.com>
1376
1377 * Makefile.in: Anchor tui-file.h dependency to $srcdir.
1378
1379 2000-03-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1380
1381 * procfs.c (proc_set_watchpoint): Declare addr parameter as
1382 CORE_ADDR, to match call from procfs_set_watchpoint.
1383
1384 * breakpoint.c (insert_breakpoints, do_enable_breakpoint):
1385 Reselect the saved frame silently after frame selection for
1386 watchpoint evaluation.
1387 (insert_breakpoints): Add missing space in `Hardware watchpoint
1388 deleted' message. Do not reinsert hardware watchpoint if it is
1389 already marked for deletion at next stop.
1390
1391 2000-03-28 Christopher Faylor <cgf@cygnus.com>
1392
1393 * partial-stab.h: Add one more check against corrupted or irregular
1394 stabs entry.
1395
1396 Tue Mar 28 12:23:37 2000 Philippe De Muyter <phdm@macqel.be>
1397
1398 * gnu-regex.c (regerror): Function renamed from `__regerror'.
1399 (Change also approved in the mainline glibc sources)
1400
1401 Tue Mar 28 18:19:50 2000 Andrew Cagney <cagney@b1.cygnus.com>
1402
1403 From 2000-03-20 Jonathan Larmour <jlarmour@redhat.co.uk>:
1404 * ser-unix.c (do_unix_readchar): Reorganise to be more robust,
1405 particularly ensuring it can't return SERIAL_TIMEOUT when told
1406 not to time out.
1407
1408 2000-03-24 Daniel Berlin <dan@cgsoftware.com>
1409
1410 * gdbtypes.c (_initialize_gdbtypes): Add "set debug overload",
1411 which never existed before, and thus, has no deprecated old command.
1412
1413 * gdbarch.c (_initialize_gdbarch): Add "set debug arch", deprecate
1414 "set archdebug" (same goes for the show commands).
1415 * gdb-events.c (_initialize_gdb_events): Add "set debug event",
1416 deprecate "set eventdebug" (same goes for the show commands).
1417 * gdbcmd.h: Add the setdebuglist and showdebuglist externs.
1418 * top.c (init_main): Deprecate remotedebug, use "set/show debug remote"
1419 instead.
1420 x(init_main): Add the "set debug" and "show debug" commands.
1421 Add setdebuglist and showdebuglist.
1422
1423 Fri Mar 24 13:00:10 2000 Daniel Berlin <dan@cgsoftware.com>
1424
1425 * maint.c (maintenance_do_deprecate): Fix crash if you call with no arguments, and fixed the warning.
1426 Added prototype for the deprecate command so it doesn't complain.
1427
1428 Tue Mar 28 11:52:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
1429
1430 * top.c (print_gdb_version): Bump copyright year to 2000.
1431
1432 Tue Mar 28 10:13:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
1433
1434 * MAINTAINERS: Add Glen McCready to write after approval list.
1435
1436 Tue Mar 28 09:59:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
1437
1438 * acconfig.h: Fix typo in comment describing HAVE_PTRACE_GETREGS.
1439 * config.h: Regenerate.
1440
1441 Mon Mar 27 19:53:29 2000 Andrew Cagney <cagney@b1.cygnus.com>
1442
1443 * TODO: Update. Add criteria for next release of GDB.
1444
1445 Mon Mar 27 17:20:25 2000 Andrew Cagney <cagney@b1.cygnus.com>
1446
1447 * acconfig.h: Provide default for HAVE_PTRACE_GETREGS.
1448 * config.h: Regenerate.
1449
1450 Mon Mar 27 16:43:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
1451
1452 * Makefile.in (install-only): Create $(bindir) and $(man1dir)
1453 before installing GDB.
1454
1455 Mon Mar 27 16:26:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
1456
1457 * Makefile.in (all-gdbtk): Check for an existing link/directory.
1458 Re-format warning message. Document that post 5.0 this can be
1459 deleted.
1460
1461 Mon Mar 27 14:46:37 2000 Andrew Cagney <cagney@b1.cygnus.com>
1462
1463 * ChangeLog: Revert whitespace changes.
1464
1465 Mon Mar 27 10:20:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1466
1467 * MAINTAINERS: Update folks who need accounts.
1468
1469 Mon Mar 27 09:29:14 2000 Andrew Cagney <cagney@b1.cygnus.com>
1470
1471 * MAINTAINERS: J.T. Conklin is NetBSD maintainer.
1472
1473 2000-03-27 Mark Kettenis <kettenis@gnu.org>
1474
1475 * config/i386/tm-i386.h: Fix typo. It is TARGET_LONG_DOUBLE_BIT
1476 instead of TARGET_LONG_DOUBLE_BITS.
1477 * config/i386/tm-i386mk.h: Likewise.
1478
1479 2000-03-26 Mark Kettenis <kettenis@gnu.org>
1480
1481 Provide `long double' support for most i386 targets.
1482 * config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT): Define as
1483 &floatformat_i387_ext.
1484 (TARGET_LONG_DOUBLE_BITS): Define as 96.
1485 (REGISTER_VIRTUAL_TYPE): Change type for FPU registers to
1486 `builtin_type_long_double'.
1487 (REGISTER_CONVERT_TO_VIRTUAL): Call
1488 i386_register_convert_to_virtual.
1489 (REGISTER_CONVERT_TO_RAW): Call i386_register_convert_to_raw.
1490 (i387_to_double, double_to_i387): Remove prototypes.
1491 (i386_extract_return_value): Change prototype to match definition
1492 in i386-tdep.c.
1493 * config/i386/tm-i386mk.h (TARGET_LONG_DOUBLE_FORMAT): #undef.
1494 (TARGET_LONG_DOUBLE_BITS): #undef.
1495 * config/i386/tm-linux.h (TARGET_LONG_DOUBLE_BIT): Remove.
1496 [HAVE_LONG_DOUBLE && HOST_I386] (LD_I387): Remove.
1497 (i387_extract_floating, i387_store_floating): Remove prototypes.
1498 (TARGET_EXTRACT_FLOATING, TARGET_STORE_FLOATING): Remove.
1499 (REGISTER_CONVERT_TO_VIRTUAL, REGOISTER_CONVERT_TO_RAW): Remove.
1500 (REGISTER_VIRTUAL_TYPE): Remove.
1501 * i386-tdep.c (i386_register_convert_to_virtual): New function.
1502 (i386_register_convert_to_raw): New function.
1503 * i387-tdep.c [LD_I387] (i387_extract_floating): Remove.
1504 (i387_store_floating): Remove.
1505
1506 Sat Mar 25 18:55:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
1507
1508 * maint.c: Re-indent.
1509
1510 Sat Mar 25 18:51:50 2000 Andrew Cagney <cagney@b1.cygnus.com>
1511
1512 * maint.c (_initialize_maint_cmds): Remove quoted trailing space.
1513
1514 2000-03-24 Christopher Faylor <cgf@cygnus.com>
1515
1516 * config/mips/tm-wince.h: Fix typo which caused include of tm-mips.h to
1517 be inoperative.
1518
1519 2000-03-24 Christopher Faylor <cgf@cygnus.com>
1520
1521 * win32-nat.c: Back out special frame walking code. It was broken.
1522 (handle_exception): Correctly identify an illegal instruction.
1523 * config/tm-cygwin.h: Eliminate special frame handling. Just use
1524 normal i386 handling.
1525
1526 2000-03-24 J.T. Conklin <jtc@redback.com>
1527
1528 * i386/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
1529 * i386nbsd-nat.c (i386nbsd_use_struct_convention): New function.
1530 (fetch_core_registers): Read fp registers.
1531 (i386nbsd_core_fns, _initialize_i386nbsd_nat): Added.
1532
1533 2000-03-24 Jonathan Larmour <jlarmour@redhat.co.uk>
1534
1535 * arm-tdep.c (thumb_skip_prologue): Take function end addr argument
1536 so that we can stop searching for the prologue past the function end
1537 (arm_skip_prologue): Call thumb_skip_prologue with function end addr
1538
1539 2000-03-24 Kevin Buettner <kevinb@redhat.com>
1540
1541 * linux-thread.c, lin-thread.c (save_inferior_pid,
1542 restore_inferior_pid): Don't do compile time comparison
1543 of TARGET_PTR_BIT and TARGET_INT_BIT.
1544
1545 Thu Mar 23 13:18:26 2000 Philippe De Muyter <phdm@macqel.be>
1546
1547 * m68k-tdep.c (P_LINKL_FP, P_LINKW_FP): Macros renamed from P_LINK_L
1548 and P_LINK_W.
1549 (P_PEA_FP, P_MOVL_SP_FP): New macros.
1550 (P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
1551 P_MOVM_L.
1552 (altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
1553 constants.
1554 (delta68_in_sigtramp): New function.
1555 (delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
1556 (m68k_skip_prologue): Use P_* macros, not hex constants.
1557 (m68k_find_saved_regs): Do not expect a fixed sequence of register save
1558 instructions, but accept them in any order; use P_* macros, not octal
1559 or hex constants; recognize also `fmovemx to (fp + displacement)' and
1560 `moveml to (fp + displacement)'.
1561 * m68/tm-delta68.h (IN_SIGTRAMP): New macro.
1562 (FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
1563
1564 Fri Mar 24 13:44:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
1565
1566 * MAINTAINERS: Add Fernando Nasser to testsuite maintainers.
1567
1568 2000-03-23 Michael Snyder <msnyder@cleaver.cygnus.com>
1569
1570 * solib.c (open_symbol_file_object): To sneak an int argument
1571 past catch_errors, instead of casting it to a pointer, simply
1572 pass it by address.
1573
1574 2000-03-23 Jimmy Guo <guo@cup.hp.com>
1575
1576 * gdbtypes.c (rank_function): Rank all N parameters and use correct
1577 index into the prams[] and args[] arrays.
1578
1579 2000-03-23 Fernando Nasser <fnasser@cygnus.com>
1580
1581 From David Whedon <dwhedon@gordian.com>
1582
1583 * top.c (execute_command): Checks all commands beore executing
1584 to see if the user needs to be warned that the command is
1585 deprecated, warns user if appropriate.
1586 (add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
1587 return values from void to struct cmd_list_element *.
1588 * command.c (lookup_cmd_1): Check aliases before following link
1589 in case user needs to be warned about a deprecated alias.
1590 (deprecate_cmd): new exported function for command deprecation,
1591 sets flags and posibly a replacement string.
1592 (deprecated_cmd_warning): New exported funciton to warn user about
1593 a deprecated command.
1594 (lookup_cmd_composition): New exported function that determines
1595 alias, prefix_command, and cmd based on a string. This is useful
1596 is we want to full name of a command.
1597 * command.h : Added prototypes for deprecate_cmd,
1598 deprecated_warn_user and lookup_cmd_composition, added flags to
1599 the cmd_list_element structure, changed return values for
1600 add_com_* and add_info_* from void to cmd_list_element.
1601 * maint.c : (maintenance_deprecate): New function to deprecate a
1602 command. This exists only so that the testsuite can deprecate
1603 commands at runtime and check the warning behavior.
1604 (maintenance_undeprecate) : New function, drops deprecated flags.
1605 (maintenance_do_deprecate): Actually does the (un)deprecation.
1606 (initialize_maint_cmds): Added the above new deprecate commands.
1607
1608 2000-03-22 Daniel Berlin <dan@cgsoftware.com>
1609 * command.c (apropos_cmd_helper): New function, meat of the
1610 apropos command.
1611 (apropos_command): New apropos command to search command
1612 names/documentation for regular expressions.
1613 (_initialize_command): Add the apropos command.
1614
1615 2000-03-23 Michael Snyder <msnyder@cleaver.cygnus.com>
1616
1617 * sol-thread.c (ps_pglobal_lookup): Change argument type from
1618 paddr_t to psaddr_t. This mistake appears to date from an
1619 erroneous man page in Solaris 2.5 -- the correct type from the
1620 system headers has always been psaddr_t.
1621 (ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Ditto.
1622 (rw_common): Ditto.
1623
1624 2000-03-22 Kevin Buettner <kevinb@redhat.com>
1625
1626 * ia64-linux-nat.c: Fix copyright.
1627 (fill_gregset): Minor formatting fix.
1628 * ia64-tdep.c (template_encoding_table, fetch_instruction,
1629 examine_prologue): Clean up some compiler warnings.
1630 (is_float_or_hfa_type_recurse, is_float_or_hfa_type, find_func_descr,
1631 find_global_pointer, find_extant_func_descr): New functions.
1632 (ia64_use_struct_convention, ia64_extract_return_value,
1633 ia64_push_arguments): Handle HFAs.
1634 (ia64_push_arguments): Find (or build) a function descriptor
1635 when given a function address.
1636 (ia64_push_return_address): Moved code for finding the
1637 global pointer into its own function, find_global_pointer ().
1638
1639 2000-03-22 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1640
1641 * event-loop.c (handle_file_event): Run through indent.
1642
1643 2000-03-22 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1644
1645 From Philippe De Muyter <phdm@macqel.be>
1646
1647 * event-loop.c (sys/types.h): File now included unconditionally.
1648 (use_poll): New variable..
1649 (gdb_notifier): poll- and select-versions merged.
1650 (add_file_handler): If HAVE_POLL, check whether poll is usable,
1651 and reset `use_poll' if not.
1652 (create_file_handler): Select poll- or select-version according to
1653 `use_poll'.
1654 (delete_file_handler, handle_file_event): Likewise.
1655 (gdb_wait_for_event, poll_timers): Likewise.
1656
1657 2000-03-22 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1658
1659 * printcmd.c (print_scalar_formatted): Truncate addresses to the
1660 size of a target pointer before passing them to print_address.
1661
1662 2000-03-22 Mark Kettenis <kettenis@gnu.org>
1663
1664 * config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
1665 * config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
1666 Remove
1667 * i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
1668 (i386_extract_return_value): Rewritten. Correctly support all
1669 floating-point types and large integer types on targets that use
1670 the standard i386 GDB register layout and return floating-point
1671 values in the FPU.
1672
1673 Wed Mar 22 15:09:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1674
1675 * configure.in (CONFIG_INITS): Do not append remote-nrom.c
1676
1677 2000-03-21 J.T. Conklin <jtc@redback.com>
1678
1679 * i386/nbsd.mh (NATDEPFILES): Change i386b-nat.o to i386nbsd-nat.o.
1680 * i386nbsd-nat.c: New file.
1681
1682 * i386/tm-nbsd.h (NUM_REGS): Removed.
1683 (HAVE_I387_REGS): Defined.
1684 * i386/nm-nbsd.h (FLOAT_INFO): Removed.
1685
1686 * tm-nbsd.h (IN_SOLIB_CALL_TRAMPOLINE): Define if not
1687 SVR4_SHARED_LIBS.
1688
1689 Wed Mar 22 11:18:59 2000 Andrew Cagney <cagney@b1.cygnus.com>
1690
1691 * MAINTAINERS: Add Jim Blandy to breakpoint maintainers. David
1692 taylor is the Solaris/SPARC maintainer. Add Jonathan Larmour to
1693 the write after approval list.
1694
1695 2000-03-21 Kevin Buettner <kevinb@redhat.com>
1696
1697 * symtab.h (MAX_SECTIONS, struct section_addr_info,
1698 symbol_file_add): Move declarations from here...
1699 * symfile.h: ...to here.
1700
1701 * solib.c (symbol_add_stub): Make symbol_file_add () aware of
1702 all section addresses, not just .text.
1703 * symfile.h, symfile.c (free_section_addr_info,
1704 build_section_addr_info_from_section_table): New functions.
1705
1706 * symfile.h (MAX_SECTIONS): Increase value to 40.
1707 * symfile.c (syms_from_objfile): Add bounds check prior to
1708 accessing ``other'' array in a section_addr_info_struct.
1709 Remove unused variable section_offsets.
1710 (add_symbol_file_command): Remove unused variable text_addr.
1711
1712 2000-03-21 Eli Zaretskii <eliz@is.elta.co.il>
1713
1714 * breakpoint.c (bpstat_stop_status): Don't stop if a read
1715 watchpoint appears to break, but the watched value changed.
1716
1717 2000-03-21 Jim Blandy <jimb@redhat.com>
1718
1719 * gdbarch.sh: Emit a definition and declaration for gdbarch_free,
1720 a companion to gdbarch_alloc, which allows a gdbarch init function
1721 to free partially-built gdbarch structures.
1722 * gdbarch.c, gdbarch.h: Regenerated.
1723
1724 2000-03-20 Kevin Buettner <kevinb@redhat.com>
1725
1726 * configure.host, configure.tgt (ia64-*-linux*): New entry.
1727
1728 * gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
1729 initialize_arch): Define for IA-64.
1730 (initialize_arch): Add declaration.
1731
1732 2000-03-20 Eli Zaretskii <eliz@is.elta.co.il>
1733
1734 * breakpoint.c (insert_breakpoints, remove_breakpoint)
1735 (bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
1736 remove, or check status of hardware watchpoints for entire structs
1737 and arrays unless the user explicitly asked to watch that struct
1738 or array.
1739 (insert_breakpoints): Try to insert watchpoints for all the values
1740 on the value chain, even if some of them fail to insert.
1741
1742 * values.c (value_primitive_field): Set the offset in struct value
1743 we return when the field is a packed bitfield.
1744
1745 2000-03-20 Michael Snyder <msnyder@cleaver.cygnus.com>
1746
1747 * remote.c (remote_threads_extra_info): New function.
1748 Implement the extra thread info query for "info threads".
1749 (remote_threads_info): Clean up a bit.
1750 (use_threadinfo_query, use_threadextra_query): New variables.
1751 Control whether GDB will use the new or old protocol for
1752 thread info queries.
1753 (remote_open_1): Initialize new variables.
1754 (remote_async_open_1): Ditto.
1755 (remote_cisco_open): Ditto.
1756
1757 2000-03-20 Kevin Buettner <kevinb@redhat.com>
1758
1759 * ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
1760 config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
1761 config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.
1762
1763 2000-03-20 Kevin Buettner <kevinb@redhat.com>
1764
1765 * utils.c (floatformat_from_doublest): Don't assume that a long
1766 will be exactly 32 bits in length. Also... make sure space
1767 that we're writing the float to is completely initialized to
1768 zeroes, even when the number of bits in the float is not
1769 evenly divisible by FLOATFORMAT_CHAR_BIT.
1770
1771 2000-03-20 Jim Blandy <jimb@redhat.com>
1772
1773 * i386-linux-nat.c: No need to #include "frame.h" any more.
1774 (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1775 LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1776 LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1777 LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1778 LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1779 LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1780 linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1781 i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1782 i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1783 i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1784 i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
1785 out that these are target-dependent, and useful in non-native
1786 configurations. Moved to...
1787 * i386-linux-tdep.c: ... Here, a new file.
1788 * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
1789 (i386-linux-tdep.o): New rule.
1790 (i386-linux-nat.o): We no longer depend on frame.h.
1791 * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
1792
1793 2000-03-04 Eli Zaretskii <eliz@is.elta.co.il>
1794
1795 * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
1796 Print an error at compile time if we are to use select, but FD_SET
1797 is not available.
1798 (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
1799 if HAVE_POLL is not defined and NO_FD_SET *is* defined.
1800 (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
1801 (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
1802 (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
1803 instead of using memcpy and memset. Use FD_ISSET.
1804
1805 * config/i386/xm-go32.h (fd_mask): Remove typedef.
1806
1807 Mon Mar 20 19:58:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
1808
1809 * command.c (_initialize_command): Document requirements for ``!''
1810 command.
1811
1812 Mon Mar 20 18:12:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
1813
1814 From Fri 10 Mar 2000 Robert
1815 <robert.melchers@drives.eurotherm.co.uk>:
1816 * sh-tdep.c (sh_processor_type_table): Add entry for sh2.
1817
1818 Mon Mar 20 17:33:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
1819
1820 From Thu Mar 16 16:49:27 EST 2000 John David Anglin
1821 <dave@hiauly1.hia.nrc.ca>:
1822 * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
1823 _initialize_hpux_thread being called twice.
1824 * configure: Regenerated.
1825
1826 2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
1827
1828 * event-top.c (_initialize_event_loop): If instream is not
1829 connected to a terminal device, turn editing off.
1830
1831 2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
1832
1833 Support for building GDB with DJGPP, and running the test suite on
1834 it:
1835 * config/djgpp/djconfig.sh: New file.
1836 * config/djgpp/config.sed: New file.
1837 * config/djgpp/README: New file.
1838 * config/djgpp/fnchange.lst: New file.
1839 * config/djgpp/djcheck.sh: New file.
1840
1841 2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
1842
1843 * ser-go32.c (ports): Make the initializers complete, to pacify
1844 GCC 2.9X.
1845
1846 2000-03-17 Jim Blandy <jimb@redhat.com>
1847
1848 * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
1849 two-dimensional array, instead of faking it with explicit index
1850 arithmetic.
1851
1852 * linux-thread.c (linuxthreads_attach, linuxthreads_detach,
1853 linuxthreads_create_inferior): Fix typo in variable name: it's
1854 linuxthreads_exit_status, not linux_exit_status.
1855
1856 * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
1857 to W_STOPCODE.
1858
1859 * solib.c (solib_add): Delete debugging code.
1860
1861 2000-03-17 Mark Kettenis <kettenis@gnu.org>
1862
1863 * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
1864 * linux-thread.c: Use WSETSTOP instead of W_STOPCODE.
1865
1866 Fri Mar 17 11:06:59 2000 Philippe De Muyter <phdm@macqel.be>
1867
1868 * language.c (set_lang_str): Do not call `free' for a null pointer.
1869 (set_type_str, set_range_str): Ditto.
1870
1871 2000-03-16 Jim Blandy <jimb@redhat.com>
1872
1873 * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
1874 merge; reinstated.
1875
1876 * solib.c (current_sos): Be more careful about freeing the new
1877 so_list node if an error occurs.
1878
1879 * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
1880 LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
1881 LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
1882 LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
1883 LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
1884 LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
1885 linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
1886 i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
1887 i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
1888 i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
1889 i386_linux_sigtramp_saved_sp): Deleted. These all implement
1890 Linux-specific signal trampoline detection, and should be moved
1891 to...
1892 * i386-linux-nat.c: ... here.
1893 * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
1894 this any more, since we're not enabling OS-specific code in a
1895 OS-independent file.
1896
1897 2000-03-16 Eli Zaretskii <eliz@is.elta.co.il>
1898
1899 * Makefile.in (go32-nat.o): Add prerequisites.
1900 (ALLDEPFILES): Add go32-nat.c.
1901
1902 2000-03-15 Michael Snyder <msnyder@cleaver.cygnus.com>
1903
1904 From "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
1905 * symfile.c (reread_symbols): Clear msymbol hash table.
1906
1907 2000-03-15 Jim Blandy <jimb@redhat.com>
1908
1909 Deal with the inferior unloading shared objects.
1910 * solib.c (current_sos): New function, replacing find_solib.
1911 (find_solib): Deleted.
1912 (free_so): New function.
1913 (clear_solib): Call free_so, instead of writing it out.
1914 (solib_add): Rewritten: compare the inferior's current list of
1915 shared objects with GDB's list, and do the required loads and
1916 unloads.
1917 (info_sharedlibrary_command, solib_address): Don't use find_solib
1918 to walk the list of shared libraries: call solib_add, and then
1919 walk the list at so_list_head normally.
1920 * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
1921 detach the core target. These tasks are taken care of elsewhere.
1922 * target.c (remove_target_sections): New function.
1923 * target.h (remove_target_sections): New declaration.
1924
1925 * solib.c (symbol_add_stub): Check whether we've already created
1926 an objfile for this shared object first, before doing all that
1927 work to compute section addresses, etc.
1928
1929 * objfiles.c (unlink_objfile): Report an internal error if objfile
1930 doesn't occur in the object_files list.
1931
1932 * solib.c (special_symbol_handling): Delete argument; it's not
1933 used.
1934
1935 Changes from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
1936
1937 * solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
1938 from solib structures. Use it throughout solib.c, get rid of all
1939 CORE_ADDR casts.
1940 (struct so_list): Change type of lmaddr to CORE_ADDR.
1941 (first_link_map_member): Change return value type to CORE_ADDR,
1942 update callers.
1943 (solib_add_common_symbols): Change parameter type to CORE_ADDR,
1944 update callers.
1945 (open_symbol_file_object, find_solib): Change type of lm variable
1946 to CORE_ADDR.
1947
1948 2000-03-15 Eli Zaretskii <eliz@is.elta.co.il>
1949
1950 * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
1951 (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
1952 to ISO C. Use ATTRIBUTE_UNUSED to avoid compiler warnings.
1953 (dos_info): Avoid compiler warning when printing a ptrdiff_t.
1954
1955 * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
1956 not opened by dos_open, but let the 3 standard handles go through
1957 unharmed.
1958
1959 2000-03-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1960
1961 * eval.c (evaluate_subexp_with_coercion): Add call to
1962 check_typedef, to handle typedeffed vars correctly.
1963
1964 Mon Mar 13 21:21:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
1965
1966 * defs.h (STREQ, STRCMP, STREQN): Document that these macros are
1967 somewhat redundant.
1968 (QUIT): Note that this can probably be replaced by a function.
1969
1970 2000-03-13 James Ingham <jingham@leda.cygnus.com>
1971
1972 Add support for a variable object that tries to evaluate itself in
1973 the currently selected frame, rather than in a fixed frame.
1974
1975 * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
1976 gdb_parse_exp_1.
1977 * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n
1978 of varobj_create.
1979 * varobj.c (varobj_list): Return type indicates whether the
1980 variable's type has changed (for current frame variables).
1981 (varobj_update): Handle the case where the variable's type has
1982 changed.
1983 (delete_variable_1): Allow for deletion of variables that have not
1984 been installed yet.
1985 (new_root_variable): Initialize use_selected_frame variable.
1986 (value_of_root): This is where most of the work to handle "current
1987 frame" variables was added. Most of the complexity involves
1988 handling the case where the type of the variable has changed.
1989 (varobj_create): Add a "type" argument, to tell if the
1990 variable is one of these "current frame" variables. Also protect
1991 call to parse_exp_1 from long jumping.
1992
1993 2000-03-13 Eli Zaretskii <eliz@is.elta.co.il>
1994
1995 * go32-nat.c (struct env387): Remove declaration.
1996 (print_387_status, i386_go32_float_info): Remove redundant
1997 functions.
1998 (regno_mapping, sig_map, excepn_map): Add braces around inner
1999 initializers.
2000 (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
2001 fix code which mixed signed with unsigned.
2002 (go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
2003 (go32_wait): Initialize INT3_addr.
2004 (go32_fetch_registers): Extend all FP registers that are shorter
2005 than 4 bytes to 32 bits. Support 32 standard FP registers defined
2006 on config/i386/tm-i386.h.
2007 (store_register): Support 32 FP registers.
2008 (go32_create_inferior): Don't crash if handed a NULL pointer
2009 instead of exec file name.
2010 (ignore): Remove unused function.
2011 (go32_insert_hw_breakpoint): Remove unused variables.
2012 (init_go32_ops): Set value of processing_gcc_compilation to 2.
2013
2014 Mon Mar 13 18:54:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
2015
2016 From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
2017 overloading, add support for seeing through references:
2018 * valops.c (find_overload_match): Handle STABS overloading for
2019 C++.
2020 (find_overload_match): Look in right place for function arguments
2021 in the debug info.
2022 (find_overload_match): Rather than giving up when we have >1
2023 perfect match, just choose one, especially since the
2024 recommendation GDB gives ("disambiguate it by specifying function
2025 signature"), is basically impossible.
2026 (check_field_in): STREQ->strcmp_iw
2027 (search_struct_field): STREQ->strcmp_iw
2028 (find_method_list): STREQ->strcmp_iw
2029 * gdbtypes.c (rank_one_type): Add ability to see through
2030 references.
2031 (rank_one_type): strcmp->strcmp_iw, because the whitespace could
2032 be different.
2033 (rank_function): Rank function properly (was doing it wrong
2034 before, comparing the wrong parts of the arrays)
2035 (rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
2036 * gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
2037 associated with converting a non-reference to a reference.
2038 * eval.c (evaluate_subexp_standard): for OP_VAR_VALUE, always
2039 return full value object; for STRUCTOP_PTR, use pointer to
2040 rtti type to get member / method if objectprint is set and
2041 target type of pointer is class.
2042
2043 * gdbtypes.c (rank_one_type): Add comment on how to eliminate the
2044 #ifdef DEBUG_OLOAD.
2045
2046 2000-03-11 Mark Kettenis <kettenis@gnu.org>
2047
2048 * gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
2049 a binary operator.
2050 (gnu_attach): Change error message for missing
2051 argument to be identical to the corresponding message in
2052 `inftarg.c'. This makes the testsuite happy.
2053
2054 2000-03-11 Mark Kettenis <kettenis@gnu.org>
2055
2056 * i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
2057 %eflags isn't modified. This fixes a bug where every call to a
2058 function in the program beyond the first call would fail.
2059
2060 Fri Mar 10 11:44:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
2061
2062 * MAINTAINERS: Devolve responsibility for domain maintenance.
2063
2064 2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2065
2066 * minsyms.c (prim_record_minimal_symbol_and_info): Add comment.
2067
2068 2000-02-25 Scott Bambrough <scottb@netwinder.org>
2069
2070 * gdb.base/long_long.exp: Correct test suite failure when printing
2071 a long long value as a double on ARM platforms.
2072
2073 Thu Mar 9 14:21:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
2074
2075 * MAINTAINERS (Core): Anthony Green is the Java - including
2076 testsuite - maintainer. Reformat testsuite and language support
2077 sections
2078
2079 2000-03-08 Mark Kettenis <kettenis@gnu.org>
2080
2081 * i386-tdep.c (i386_linux_saved_pc_after_call): New function.
2082 * config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call
2083 i386_linux_saved_pc_after_call.
2084
2085 2000-03-06 Jim Blandy <jimb@redhat.com>
2086
2087 From Tom Tromey <tromey@cygnus.com> and Keith Seitz <?>:
2088
2089 * minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
2090 (compact_minimal_symbols): Added `objfile' argument.
2091 Put symbols in the objfile's hash table.
2092 (install_minimal_symbols): Put symbols in the objfile's demangled
2093 hash table.
2094 (lookup_minimal_symbol): Use hash table to find symbol in
2095 objfile.
2096 (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
2097 functions.
2098 (prim_record_minimal_symbol_and_info): Initialize the
2099 hash link fields of the new minimal symbol.
2100 * symtab.h (struct minimal_symbol): New fields `hash_next',
2101 `demangled_hash_next'.
2102 (msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
2103 * objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
2104 (struct objfile): New fields `msymbol_hash',
2105 `msymbol_demangled_hash'.
2106
2107 2000-03-06 Jim Blandy <jimb@redhat.com>
2108
2109 * solib.c (first_link_map_member): Doc fix.
2110
2111 2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2112
2113 From Eli Zaretskii <eliz@is.elta.co.il>:
2114
2115 * event-loop.c (poll_timers): Don't compare delta.tv_sec with
2116 zero, since time_t might be unsigned.
2117
2118 2000-03-06 Mark Kettenis <kettenis@gnu.org>
2119
2120 * i386-linux-nat.c (supply_fpregset): Mask off the reserved bits
2121 in *FPREGSETP.
2122 (convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP.
2123
2124 2000-03-05 Mark Kettenis <kettenis@gnu.org>
2125
2126 Allow GDB to run on Linux 2.0 again.
2127 * config.in: Add HAVE_PTRACE_GETREGS.
2128 * configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
2129 * configure: Regenerated.
2130 * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
2131 CANNOT_STORE_REGISTER): New defines.
2132 * i386-linux-nat.c (have_ptrace_getregs): New variable.
2133 (PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
2134 old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
2135 store_register, old_store_inferior_registers): Copied over from
2136 `inptrace.c' as a temporary measure.
2137 (fetch_regs, store_regs, fetch_fpregs, store_fpregs):
2138 Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
2139 HAVE_PTRACE_GETREGS isn't defined.
2140 (fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
2141 with EIO.
2142 (fetch_inferior_registers, store_inferior_registers): Fall back on
2143 the method use in `infptrace.c' (by calling
2144 old_fetch_inferior_registers and old_store_inferior_registers) if
2145 `have_ptrace_getregs' isn't set.
2146
2147 2000-03-05 Mark Kettenis <kettenis@gnu.org>
2148
2149 * i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead
2150 of gregset_t and fpregset_t. Those are the only names that are
2151 guaranteed to specify the right types for all supported Linux
2152 systems out there.
2153 Various doc fixes and gratitious local variable renames, all in an
2154 attempt to stress similarities between the code and unify the
2155 terminology used. Use ISO-C all over.
2156 (regmap): Remove trailing comma.
2157 (FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR.
2158 (convert_to_gregset): Make static. Remove GDB_REGS argument. It
2159 is unnecessary and wasn't used anyway. All callers changed.
2160 (convert_to_fpregset, convert_to_xfpregset): Likewise.
2161 (fetch_regs, store_regs): Remove unused variable `regno'.
2162 (fill_fpregs): If REGNO is not -1, only update the specified
2163 register.
2164 (fetch_core_registers): Renamed from
2165 i386_linux_fetch_core_registers. There is no need for a unique
2166 name since the function is static anyway.
2167 (linux_elf_core_fns): Renamed from i386_linux_nat_core_functions
2168 since it is more descriptive.
2169
2170 Sun Mar 5 19:40:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
2171
2172 * MAINTAINERS (readline/): Expand to include host maintainers.
2173
2174 2000-03-04 Mark Kettenis <kettenis@gnu.org>
2175
2176 Fix support for Linux/i386 signal trampolines. The old approach
2177 didn't work for Linux 2.2 and beyond, and didn't work with recent
2178 versions of the GNU C library.
2179 * i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
2180 LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
2181 (linux_rt_sigtramp_code): New variable.
2182 (LINUX_RT_SIGTRAMP_LEN): New define.
2183 (i386_linux_rt_sigtramp_start): New function. Detect start of
2184 signal trampolines for RT signals.
2185 (i386_linux_sigtramp): Removed.
2186 (i386_linux_in_sigtramp): New function.
2187 (i386_linux_sigcontext_addr): New function. Recognize the names
2188 of the signal tranmpolines used by recent versions of the GNU C
2189 library, and add support for RT signals.
2190 (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): New
2191 defines. Moved here from config/i386/tm-linux.h.
2192 (i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
2193 Reimplement in terms of i386_linux_sigcontext_addr.
2194 * config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
2195 (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
2196 Moved to i386-tdep.c.
2197 (IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
2198
2199 Sat Mar 4 19:38:11 2000 Andrew Cagney <cagney@b1.cygnus.com>
2200
2201 By: Sat Mar 4 04:08:58 2000 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
2202 * Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}.
2203
2204 Sat Mar 4 17:23:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
2205
2206 * MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the
2207 sim directory.
2208
2209 Sat Mar 4 16:19:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
2210
2211 * MAINTAINERS: Add Michael Snyder and Peter Schauer to list of
2212 ``Blanket Write Privs'' maintainers.
2213
2214 Sat Mar 4 15:58:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
2215
2216 From Sun 20 Feb 2000 Robert Lipe <robertl@sco.com>:
2217 * language.c (longest_local_hex_string_custom): Don't compile
2218 'long long' section if host doesn't have 'long long'.
2219
2220 Sat Mar 4 15:45:38 2000 Andrew Cagney <cagney@b1.cygnus.com>
2221
2222 * language.c (longest_raw_hex_string): Comment out. Appears
2223 unused.
2224
2225 Sat Mar 4 13:02:09 2000 Andrew Cagney <cagney@b1.cygnus.com>
2226
2227 * utils.c (mcalloc), defs.h (mcalloc): Keep consistent with
2228 "mmalloc.h" which means using PTRs.
2229 (init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C.
2230
2231 Sat Mar 4 11:49:21 2000 Andrew Cagney <cagney@b1.cygnus.com>
2232
2233 * defs.h (store_address, store_unsigned_integer, store_address):
2234 Replace PTR with void* in delcaration.
2235 * findvar.c (extract_signed_integer, extract_unsigned_integer,
2236 extract_long_unsigned_integer, extract_address,
2237 store_signed_integer, store_unsigned_integer, store_address):
2238 Convert definition to ISO-C. Replace PTR with void*.
2239
2240 Sat Mar 4 10:57:25 2000 Andrew Cagney <cagney@b1.cygnus.com>
2241
2242 * defs.h (make_cleanup_func): Document as deprecated.
2243 (make_cleanup_ftype): New typedef. Make signature consistent with
2244 other function typedefs. Document as not be used out side of
2245 make_cleanup code. Use in make_cleanup declarations.
2246 (null_cleanup): Replace PTR with void*.
2247
2248 * utils.c (make_cleanup, make_final_cleanup, make_run_cleanup,
2249 make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup,
2250 null_cleanup): Change K&R definition to ISO-C using void* and
2251 make_cleanup_fytpe.
2252 (discard_my_cleanups): Don't cast argument to free.
2253
2254 2000-03-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2255
2256 * defs.h (struct continuation_arg): Change type of field 'data'
2257 from PTR to void *.
2258
2259 * event-loop.h: Eliminate uses of PTR, use 'void *' instead.
2260
2261 * event-top.c: Ditto.
2262
2263 Fri Mar 3 15:39:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
2264
2265 * Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
2266 configure.
2267 (SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
2268 SUBDIR_GDBTK_ALL): Define.
2269 (all-gdbtk, clean-gdbtk): New targets.
2270 (all): Add CONFIG_ALL as dependency.
2271 (clean): Add CONFIG_CLEAN as dependency.
2272
2273 * configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
2274 (LN_S): Define. Delete GDBtk's link code.
2275
2276 Fri Mar 3 13:12:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
2277
2278 * configure.in (ENABLE_GDBTK): Delete variable.
2279 (enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
2280 * Makefile.in: Update.
2281 * configure: Regenerate
2282
2283 2000-03-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2284
2285 * config/alpha/alpha-linux.mh: Remove core-regset.o fron the
2286 NATDEPFILES list.
2287
2288 2000-03-02 Mark Kettenis <kettenis@gnu.org>
2289
2290 * config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
2291 Override definitions to include the normal FPU registers.
2292 (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
2293 REGISTER_CONVERT_TO_RAW): Removed. The default definitions are
2294 fine for AIX/i386.
2295 (i387_to_double, double_to_i387): Remove prototypes.
2296
2297 2000-03-02 Kevin Buettner <kevinb@redhat.com>
2298
2299 * findvar.c (extract_floating, store_floating): Use target
2300 floating point type sizes rather host sizes to determine
2301 which conversion needs to be done.
2302
2303 2000-03-02 Nick Duffek <nsd@cygnus.com>
2304
2305 * uw-thread.c: Apply GNU conventions to comment formatting.
2306 (deactivate_uw_thread): Call remove_thread_event_breakpoints().
2307 (uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
2308 call to deactivate_uw_thread().
2309
2310 Thu Mar 2 09:04:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
2311
2312 * MAINTAINERS: Daniel Berlin is C++ maintainer.
2313
2314 Thu Mar 2 08:55:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
2315
2316 * MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
2317 a joint GNU/Linux/x86 maintainer. Nick Duffeck and Robert Lipe
2318 share SCO/Unixware. Nick Duffek and Peter Schauer share
2319 Solaris/x86.
2320
2321 Wed Mar 1 22:12:35 2000 Andrew Cagney <cagney@b1.cygnus.com>
2322
2323 From Wed 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
2324 * remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
2325 * remote-rdi.c (arm_rdi_close): Ditto.
2326
2327 Wed Mar 1 19:31:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
2328
2329 * CONTRIBUTE (configure.in): Note that patches to configure are
2330 not needed.
2331
2332 2000-03-01 Mark Kettenis <kettenis@gnu.org>
2333
2334 * MAINTAINERS: Correct my own mail address.
2335
2336 Wed Mar 1 11:26:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
2337
2338 * MAINTAINERS: Document people with paperwork pending.
2339
2340 Wed Mar 1 00:49:06 2000 Andrew Cagney <cagney@b1.cygnus.com>
2341
2342 From 2000-02-28 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2343 Make NEW_PROC_ABI interface functional on Solaris x86.
2344 * sol-thread.c (ps_lgetLDT): Rewrite to use new
2345 procfs_find_LDT_entry function from procfs.c, mostly copied from
2346 lin-thread.c.
2347 * inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
2348 needed.
2349
2350 Wed Mar 1 00:34:55 2000 Andrew Cagney <cagney@b1.cygnus.com>
2351
2352 From 2000-02-26 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2353 * config/i386/tm-i386sol2.h (MERGEPID): Define.
2354
2355 Wed Mar 1 00:06:19 2000 Andrew Cagney <cagney@b1.cygnus.com>
2356
2357 From 1999-08-13 J.T. Conklin <jtc@redback.com>:
2358 * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
2359 FRAME_FIND_SAVED_REGS.
2360 (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
2361 * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
2362 Update.
2363
2364 Tue Feb 29 23:56:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
2365
2366 From 2000-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
2367 * objfiles.c (open_mapped_file): Fix obsolete references to `mapped'
2368 parameter.
2369
2370 Tue Feb 29 18:47:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
2371
2372 From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
2373 * config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
2374 (top level): Add prototypes for go32_* functions.
2375 * config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
2376 (FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
2377 Override definitions from tm-i386.h.
2378 (REGISTER_VIRTUAL_TYPE): Remove macro definition.
2379 * i386-tdep.c (i386_extract_return_value)
2380 [I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
2381 to the list of targets which return FP values in FP registers.
2382
2383 * i386-tdep.c (i386_extract_return_value): Add FIXME recommending
2384 that this function be re-implemented using multi-arch.
2385
2386 Tue Feb 29 18:40:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
2387
2388 From 2000-02-23 Eli Zaretskii <eliz@is.elta.co.il>:
2389 * utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
2390 and ScreenRows.
2391 * ser-go32.c: Include string.h, for prototype of strncasecmp.
2392 (dpmi_regs, dpmi_sregs): Remove unused variables.
2393 (dos_flush_input): Return a value, to prevent compiler warning.
2394 * expprint.c (dump_prefix_expression): Use %ld in format and cast
2395 sizeof(union exp_element) to long, to prevent GCC from complaining
2396 about format/argument mismatch.
2397 (dump_postfix_expression): Likewise.
2398
2399 Tue Feb 29 18:09:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
2400
2401 * arm-tdep.c: Include <ctype.h>.
2402
2403 Tue Feb 29 17:33:49 2000 Andrew Cagney <cagney@b1.cygnus.com>
2404
2405 From Wed, 23 Feb 2000 Fernando Nasser <fnasser@redhat.com>:
2406 * stack.c (backtrace_command_1), infrun.c (normal_stop): Check
2407 that the target's stack was valid.
2408
2409 Tue Feb 29 15:14:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
2410
2411 From 2000-02-22 Stephane Carrez <stcarrez@worldnet.fr>:
2412 * dwarf2read.c (read_address): Read 16-bits addresses.
2413
2414 2000-02-28 Scott Bambrough <scottb@netwinder.org>
2415
2416 * arm-linux-nat.c (fetch_nw_fpe_*):
2417 Renamed to fetch_nwfpe_* to use the same naming convention
2418 as in the Linux kernel. Modified prototype to get rid of
2419 unused parameters.
2420 (store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
2421 naming convention as in the Linux kernel. Fixed calls to
2422 fetch_nwfpe_*.
2423 (store_fpregs): Fixed calls to store_nwfpe_*. Removed
2424 unused variable.
2425
2426 Mon Feb 28 18:24:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
2427
2428 * MAINTAINERS: Transfer d30v maintainership to David Taylor.
2429
2430 2000-02-28 Christopher Faylor <cgf@cygnus.com>
2431
2432 * win32-nat.c: Remove unneeded header.
2433 * wince.c: Ditto.
2434
2435 Mon Feb 28 13:34:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
2436
2437 * wince.c: Include "gdb_wait.h" and not "wait.h".
2438
2439 Mon Feb 28 10:58:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
2440
2441 * MAINTAINERS: Mention mmalloc. Expand Host/Native and
2442 Target/Architecture maintainers descriptions.
2443
2444 2000-02-26 Mark Kettenis <kettenis@gnu.org>
2445
2446 * gnu-nat.c: Include "gdbthread.h". Include <hurd.h>.
2447 Reorder headers a bit. Overall cleanup and minor reformatting.
2448 (MIG_SERVER_DIED): Remove define.
2449 (proc_update_sc): Add braces to silence compiler warning.
2450 (proc_steal_exc_port): Initialize err to zero.
2451 (make_proc): Add braces to silence compiler warning.
2452 (inf_validate_task_sc): Add cast to silence compiler warning.
2453 (inf_set_traced): Reorganize a bit to silence compiler warning.
2454 (inf_validate_procs): Use mach_msg_type_number_t for all thread
2455 numbers and add braces to silence compiler warning.
2456 (gnu_wait): Add prototypes for server functions and add braces to
2457 silence compiler warnings.
2458 (S_exception_raise_request): Pass subcode to inf_debug call.
2459 (gnu_write_inferior): Remove unused variable `protection_changed'.
2460 (gnu_xfer_memory): Remove unused variable `result'.
2461 (set_sig_thread_cmd): Remove unused varible `tid'.
2462 (set_signals_cmd): Remve unused variable `trace'.
2463 (add_task_commands): Provide complete prototype. Reformat help
2464 strings a bit to make sure the first line is a full sentence.
2465 Call info_port_rights_cmd instead of info_send_rights_cmd for the
2466 "info port-rights" command.
2467 (add_thread_commands): Provide complete prototype. Make static.
2468 Reformat help strings a bit to make sure the first line is a full
2469 sentence.
2470 (_initialize_gnu_nat): Provide complete prototype.
2471
2472 2000-02-26 Mark Kettenis <kettenis@gnu.org>
2473
2474 Make cross-compilation for the Hurd more friendly.
2475 From Jeff Bailey <jbailey@gnu.org>:
2476 * configure.in: Use AC_CHECK_TOOL to find MiG.
2477 * Makefile.in (MIG): New variable.
2478 * config/i386/i386gnu.mh (MIG): Remove.
2479 * configure: Regenerated.
2480
2481 2000-02-26 Kevin Buettner <kevinb@redhat.com>
2482
2483 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
2484 comment explaining motivation behind this function and why
2485 the generic facilities won't work for this platform.
2486 * rs6000-tdep.c (skip_prologue): Always test to make sure
2487 that an instruction is read successfully from the target's
2488 memory. Introduce notion of instructions which may appear in
2489 the prologue, but may not end the prologue. Added explicit
2490 check for nop instruction. Use memset() to zero the frame
2491 data instead of assignment from a statically allocated,
2492 uninitialized structure.
2493
2494 Sat Feb 26 17:15:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
2495
2496 * MAINTAINERS: Chris Faylor is responsible for all MS Windows
2497 systems. Note that Jim Blandy as maintainer for ``tracing
2498 bytecode stuff''
2499
2500 2000-02-25 Fernando Nasser <fnasser@cygnus.com>
2501
2502 From: Thomas Zenker <thz@Lennartz-electronic.DE>
2503 * rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
2504 NetBSD...) sys_errlist should not be declared in hsys.c.
2505 NEED_SYSERRLIST is set already by configure, so we can use it.
2506 * rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
2507 posix compliant and we should not work with the old compatibility
2508 stuff. Because of that I undef BSD in case of FBSD etc and include
2509 sys/ioctl to get the flags.
2510 * rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
2511 for exclusive use.
2512
2513 2000-02-24 Kevin Buettner <kevinb@redhat.com>
2514
2515 * ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
2516 of return structure in r3 if necessary.
2517 (ppc_linux_memory_remove_breakpoints): New function.
2518 * rs6000-tdep.c (skip_prologue): Make sure that the cases
2519 for storing either cr or lr to the stack only handle those
2520 cases. (I.e, don't let these cases match 0x00000000 which is
2521 found found in the shared library trampoline prior to the
2522 loading of the shared library.)
2523 * config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
2524 Declare.
2525 (MEMORY_REMOVE_BREAKPOINT): Define.
2526
2527 Wed Feb 23 23:27:48 2000 Andrew Cagney <cagney@behemoth.cygnus.com>
2528
2529 * hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
2530
2531 Thu Feb 24 18:42:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
2532
2533 * configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
2534 $(SUBDIR_*_INSTALL) when so configured.
2535 * configure: Regenerate.
2536
2537 * Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
2538 configure.
2539 (install-only): Add dependency on $(CONFIG_INSTALL). Delete code
2540 installing GDBtk.
2541 (uninstall): Add dependency on $(CONFIG_UNINSTALL).
2542 (SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
2543 SUBDIR_GDBTK_INSTALL): Define.
2544 (install-gdbtk): New target.
2545
2546 Thu Feb 24 18:19:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
2547
2548 * configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
2549 * configure: Regenerate.
2550
2551 2000-02-24 Christopher Faylor <cgf@cygnus.com>
2552
2553 * configure.tgt: Add arm, mips, sh wince targets.
2554 * config/arm/tm-wince.h: New file.
2555 * config/arm/wince.mt: New file.
2556 * config/sh/tm-wince.h: New file.
2557 * config/sh/wince.mt: New file.
2558 * config/mips/tm-wince.h: New file.
2559 * config/mips/wince.mt: New file.
2560 * wince.c: New file.
2561 * wince-stub.c: New file.
2562 * wince-stub.h: New file.
2563 * sh-tdep.c: Use correct register names for Windows CE.
2564
2565 Wed Feb 23 19:01:45 EST 2000 Nicholas Duffek <nsd@cygnus.com>
2566
2567 * top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
2568 (error_return, quit_return): Merge into catch_return pointer.
2569 (return_to_top_level): Update comment. Longjmp to *catch_errors,
2570 and communicate reason to catch_errors via setjmp return value.
2571 (catch_errors): Always catch both quit and error, and if a catch
2572 wasn't requested by caller, throw it to the next catch_error.
2573 Replace dual longjmp buffer memcpy with single pointer change.
2574 Add FIXME for possibly adding new interface to tell caller what
2575 event was caught. Add extensive comments.
2576 * defs.h (enum return_reason): Reserve 0 for use as initial
2577 setjmp() return value.
2578 (RETURN_MASK): New public macro to generate RETURN_MASK_* from
2579 enum return_reason.
2580 (RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
2581
2582 2000-02-23 Fernando Nasser <fnasser@cygnus.com>
2583
2584 * infcmd.c (run_stack_dummy): Do not pop frame on random signal.
2585 * valops.c (_initialize_valops): Add command "set unwindonsignal".
2586 (hand_function_call): Test for unwind_on_signal and act accordingly.
2587
2588 Wed Feb 23 12:58:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
2589
2590 * gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
2591 Match ../include/dis-asm.h change.
2592 * gdbarch.h: Regenerate.
2593 * corefile.c (dis_asm_read_memory): Update.
2594
2595 Mon Feb 21 13:57:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
2596
2597 * configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
2598 (ENABLE_CFLAGS): Move initialization to start of file.
2599 (enable-gdbmi): Add new configure option --enable-gdbmi. When
2600 selected and an ${srcdir}/mi directory is present enable MI
2601 interface.
2602
2603 * configure: Regenerate.
2604
2605 * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
2606 SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
2607 (CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
2608 CONFIG_LDFLAGS): New macros. Initialized by autoconf via
2609 @CONFIG...@.
2610 (INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
2611 INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
2612
2613 * mi: New directory. MI interface to GDB.
2614
2615 * defs.h (interpreter_p): Declare when UI_OUT.
2616 * top.c (gdb_init): When interpreter_p, check that the interpreter
2617 was recognized by one of the linked in interpreters.
2618 * main.c (interpreter_p): Define.
2619 (captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
2620 * event-top.c (display_gdb_prompt): When interpreter_p, assume
2621 interpreter displays prompt.
2622
2623 * breakpoint.c (print_it_typical, watchpoint_check,
2624 print_one_breakpoint, mention): When MI include additional
2625 target status information.
2626 * infrun.c (print_stop_reason, normal_stop): Ditto.
2627
2628 2000-02-22 Jim Blandy <jimb@redhat.com>
2629
2630 * gdbarch.sh: Make the `default' field really default to zero, as
2631 documented.
2632
2633 Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
2634 * valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
2635 more function-like.
2636 (default_coerce_float_to_double, standard_coerce_float_to_double):
2637 New functions.
2638 (value_arg_coerce): Adjust for new definition.
2639 * value.h (default_coerce_float_to_double,
2640 standard_coerce_float_to_double): New declarations for the above.
2641 * gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
2642 * gdbarch.c, gdbarch.h: Regenerated.
2643 * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
2644 tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
2645 definitions.
2646 * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
2647 function here.
2648 (mips_gdbarch_init): Install that as our coerce_float_to_double
2649 function.
2650
2651 2000-02-22 Kevin Buettner <kevinb@redhat.com>
2652
2653 * ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
2654 type.
2655 * ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
2656 forward declaration.
2657
2658 * ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
2659 where the next frame is a signal handler caller.
2660
2661 * config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
2662 undef.
2663 (tm-linux.h): Include.
2664 (tm-sysv4.h): Don't include (directly). config/tm-linux.h will
2665 include this file for us.
2666 (REALTIME_LO, REALTIME_HI): Don't define. These are defined by
2667 config/tm-linux.h for us.
2668 (SOFUN_ADDRESS_MAYBE_MISSING): Define.
2669
2670 2000-02-21 Kevin Buettner <kevinb@redhat.com>
2671
2672 * Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
2673 (ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
2674 * configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
2675 and like targets.
2676
2677 * ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
2678 config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
2679 * config/powerpc/xm-linux.h: Substantially revised for native
2680 port.
2681 * config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
2682 (NATDEPFILES): Update list to reflect the fact that we can
2683 now debug natively.
2684
2685 * rs6000-tdep.c, config/rs6000/tm-rs6000.h
2686 (rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
2687 Renamed; The former names were lacking the rs6000_ prefix.
2688 * rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
2689 instead of rs6000_frame_chain.
2690 (rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
2691 of rs6000_frameless_function_invocation.
2692
2693 2000-02-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2694
2695 From Philippe De Muyter <phdm@macqel.be>
2696
2697 * event-loop.c (handle_file_event): In case of poll, enable
2698 printing of informational message if an error/exception is
2699 detected on the file descriptor.
2700
2701 2000-02-21 Jim Kingdon <kingdon@redhat.com>
2702
2703 * MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
2704
2705 Mon Feb 21 12:50:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
2706
2707 * buildsym.c: Include "language.h" and "expression.h" for
2708 longest_local_hex_string_custom.
2709
2710 Mon Feb 21 11:17:18 2000 Andrew Cagney <cagney@b1.cygnus.com>
2711
2712 * gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
2713 * gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
2714 Cagney <cagney@b1.cygnus.com>.
2715
2716 Mon Feb 21 11:03:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
2717
2718 * MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
2719 nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
2720 Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
2721 to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
2722 Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
2723 Kingdon.
2724 * MAINTAINERS: Add Nick Clifton to write after approval list.
2725
2726 Mon Feb 21 10:30:39 2000 Andrew Cagney <cagney@b1.cygnus.com>
2727
2728 * MAINTAINERS: Add note on multiple maintainers.
2729
2730 2000-02-19 Philippe De Muyter <phdm@macqel.be>
2731
2732 * cli-out.c (cli_table_header): Type of parameter `alignment' is
2733 `enum ui_align', not `int'.
2734 (cli_field_string, cli_field_skip): Likewise.
2735
2736 2000-02-18 Jim Blandy <jimb@redhat.com>
2737
2738 From Jimmy Guo <guo@cup.hp.com>:
2739 * buildsym.h (add_free_pendings): Declare.
2740 * buildsym.c (add_free_pendings): New function.
2741 (make_blockvector): 32x64 fix using longest_local_hex_string().
2742 (start_subfile): initialize variable 'subfile'.
2743
2744 2000-02-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2745
2746 * remote.c (remote_async_detach): Use target_mourn_inferior(), to
2747 make sure that all is cleaned up after we disconnect from the
2748 target.
2749 (remote_detach): Ditto.
2750
2751 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
2752
2753 From Rodney Brown <RodneyBrown@pmsc.com>
2754 * ui-out.c (ui_out_set_flags): Fix typo, removing warning and
2755 potentially harming mistake.
2756
2757 2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
2758
2759 * arm-tdep.c: Use header file instead of extern declarations for
2760 the {get,set}_arm_regname* functions.
2761
2762 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
2763
2764 * configure.in: Replaces obsolete gdbtk-variable.c with
2765 gdbtk-varobj.c.
2766 * configure: Regenerate.
2767 * Makefile.in: Remove obsolete/extraneous references to
2768 gdbtk-var* files.
2769
2770 2000-02-16 Mark Kettenis <kettenis@gnu.org>
2771
2772 * target.c (do_target_signal_to_host): Do not use REALTIME_LO in
2773 the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
2774 33 by definition, whereas REALTIME_LO might be 32 on systems that
2775 have SIG32 such as Linux. Make sure that the signal number
2776 returned is within the range specified by REALTIME_LO and
2777 REALTIME_HI.
2778
2779 2000-02-16 Mark Kettenis <kettenis@gnu.org>
2780
2781 * configure: Regenerated.
2782
2783 2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
2784
2785 * arm-tdep.c (set_disassembly_flavor, arm_othernames,
2786 _initialize_arm_tdep): Allows the user to choose between any of
2787 the flavors available for the disassembly to be used in the "info
2788 reg" command and elsewhere in gdb. It prevents having to maintain
2789 this information in two places by using the data kept in the
2790 opcodes directory.
2791
2792 2000-02-09 Mark Kettenis <kettenis@gnu.org>
2793
2794 * configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
2795 prfpregset_t in <sys/procfs.h>.
2796 * config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
2797 HAVE_PRFPREGSET_T.
2798 * gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
2799 prgregset_t and prfpregset_t if they are not already present.
2800
2801 Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
2802
2803 From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
2804 * procfs.c: Define MERGEPID if not defined. For osf4.0e.
2805
2806 2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
2807
2808 * Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
2809 'do-doc'.
2810
2811 2000-02-15 Kevin Buettner <kevinb@redhat.com>
2812
2813 Changes for AIX 4.3:
2814 * rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
2815 to correct value for generic dummy frames. When using
2816 generic dummy frames, don't attempt to write TOC value or
2817 function to call into the call dummy.
2818 (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
2819 code to also handle the PowerOpen ABI.
2820 (ppc_push_return_address): Enable for all ports.
2821 * config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
2822 PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
2823 CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
2824 CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
2825 provided by generic RS6000 definitions so that call dummies
2826 are implemented using generic dummy frames instead.
2827
2828 * rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
2829 prior to changing the stack pointer via ptrace(). Also, ignore
2830 attempts to store to undefined registers that are less than
2831 NUM_REGS.
2832
2833 * rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
2834 frame from 436 to 448 to account for alignment padding.
2835 (rs6000_push_arguments): Obtain actual register size instead
2836 of assuming the register is 4 bytes long. [There's still
2837 more work to be done to totally remove the 4 byte assumption,
2838 however.] Make sure the stack is 16 byte aligned as required
2839 by the PowerOpen ABI. Also, make sure that small structures
2840 passed in registers are properly aligned within the register.
2841
2842 2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
2843
2844 Patch applied by Kevin Buettner <kevinb@redhat.com>
2845
2846 * rs6000-tdep.c (skip_prologue): skip copying of argument
2847 registers to local variable registers.
2848
2849 2000-02-14 Jim Kingdon <kingdon@redhat.com>
2850
2851 * elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
2852 sym->section->index number is not a SECT_OFF_* code.
2853
2854 Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
2855
2856 * MAINTAINERS (write after approval): Add H.J. Lu.
2857
2858 2000-02-14 Nick Clifton <nickc@cygnus.com>
2859
2860 * sh-tdep.c: Remove extraneous code.
2861
2862 2000-02-14 Amit S. Kale <akale@veritas.com>
2863
2864 * elfread.c (elf_symtab_read): Move the use of sym to after where
2865 it is set.
2866 Checked in by Jim Kingdon <kingdon@redhat.com>
2867
2868 Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
2869
2870 * MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
2871
2872 Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
2873
2874 From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
2875 * dwarf2read.c: (die_is_declaration): New fn.
2876 (read_structure_scope): Use it.
2877
2878 * dwarf2read.c: (die_is_declaration): Convert to ISO-C.
2879
2880 2000-02-10 J.T. Conklin <jtc@redback.com>
2881
2882 * config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
2883 * configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
2884 configdirs.
2885 * gdbserver/low-nbsd.c: New file.
2886
2887 * gdbserver/Makefile.in: convert to autoconf.
2888 * gdbserver/configure.in: likewise.
2889 * gdbserver/configure: generate.
2890
2891 Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
2892
2893 * CONTRIBUTE: New file. How to contribute to GDB.
2894
2895 Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
2896
2897 * MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
2898 Buettner to powerpc maintainers. Make Kevin Buettner the
2899 GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
2900 and Jason Molenda to write after aproval list.
2901
2902 Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
2903
2904 * MAINTAINERS: Reformat. Separate into check-in categories.
2905
2906 Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
2907
2908 * uw-thread.c: Remove __FUNCTION__ GNUism.
2909
2910 2000-01-17 Amit S. Kale <akale@veritas.com>
2911
2912 * elfread.c (elf_symtab_read): Use offset for the section in which a
2913 symbol resides, instead of .text section for calculating address of a
2914 symbol.
2915 Checked in by Jim Kingdon <kingdon@redhat.com>
2916
2917 2000-02-10 Mark Kettenis <kettenis@gnu.org>
2918
2919 * gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
2920 no longer necessary now we have gdb_wait.h.
2921
2922 2000-02-09 Mark Kettenis <kettenis@gnu.org>
2923
2924 * gnu-nat.c (proc_string): Make global.
2925 (do_mach_notify_dead_name): Suppress dead name notifications if we
2926 know that the task is dead.
2927
2928 1999-12-13 Mark Kettenis <kettenis@gnu.org>
2929
2930 * gnu-nat.c (inf_validate_task_sc): Get task info via proc server
2931 instead of directly from the kernel. Add some hackery to make
2932 sure that the info isn't influenced by suspension of the task in
2933 the proc server itself.
2934
2935 2000-02-10 Jim Kingdon <kingdon@redhat.com>
2936
2937 * defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
2938 approved by Michael Snyder.
2939
2940 2000-02-09 Mark Kettenis <kettenis@gnu.org>
2941
2942 * linux-thread.c: Include defs.h before gdb_wait.h.
2943
2944 Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
2945
2946 * Makefile.in (wait_h): Delete macro. Update all dependencies
2947 specifying gdb_wait.h instead.
2948
2949 * ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
2950 remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
2951 remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
2952 convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
2953 remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
2954 remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
2955 remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
2956 ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
2957 infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
2958 fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
2959 or <sys/wait.h>.
2960 * nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
2961
2962 * gdb_wait.h: New file. Based on ../include/wait.h. Include
2963 <sys/wait.h> or <wait.h> and then define any missing WIF macros.
2964
2965 Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
2966
2967 * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
2968 * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
2969 (d10v_stack_align): Declare.
2970 * d10v-tdep.c (d10v_stack_align): Define.
2971
2972 1999-08-23 J.T. Conklin <jtc@redback.com>
2973
2974 * top.c (remote_timeout): Change default to 2. Add comment
2975 explaining history of changes to the default value.
2976 * remote.c (_initialize_remote): Remove code that adds set/
2977 show remotetimeout, as that's also done in top.c
2978
2979 1999-10-18 J.T. Conklin <jtc@redback.com>
2980
2981 * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
2982 Return E01 instead of P01 when 'P' command fails.
2983
2984 2000-02-05 J.T. Conklin <jtc@redback.com>
2985
2986 * remote.c (putpkt_binary): Handle NAK from target stub.
2987
2988 2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
2989
2990 * configure.in: Remove the addition of sol-thread.c to the
2991 CONFIG_INITS list. This caused problems with init.c, because
2992 sol-thread.c would be grepped twice for _initialize_* functions.
2993 * configure: Ditto.
2994 * Makefile.in: Add FIXME for init.c.
2995
2996 2000-02-07 Jim Kingdon <kingdon@redhat.com>
2997
2998 Clean up compiler warnings:
2999 * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
3000 stack.c, valprint.c: Change variables to unsigned.
3001 * bcache.c: Rearrange to avoid warnings about variables not being set.
3002 * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
3003 rather than declaring print_max and repeat_count_threashold
3004 ourselves (incorrectly).
3005 * valprint.h: Do declare repeat_count_threashold.
3006 * ch-exp.c: Use default case for internal error.
3007 * findvar.c: Don't omit argument type.
3008 * symtab.c: Remove unused variable.
3009
3010 2000-02-04 Jim Blandy <jimb@redhat.com>
3011
3012 * c-typeprint.c (remove_qualifiers): New function.
3013 (c_type_print_base): Use it to remove qualifiers from C++
3014 qualified names, not strrchr.
3015
3016 * c-typeprint.c (c_type_print_base): Recognize type conversion
3017 operators by calling is_type_conversion_operator.
3018 (is_type_conversion_operator): New function.
3019
3020 2000-02-04 Nick Clifton <nickc@cygnus.com>
3021
3022 * config/arm/tm-arm.h (LOWEST_PC): Define.
3023
3024 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3025
3026 * infrun.c (resume): Make just one call to target_resume(), instead
3027 of four: set up correct parameters in all the cases ahead of time,
3028 and do call at the end.
3029
3030 2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3031
3032 * config/powerpc/tm-ppc-eabi.h: Define
3033 SOFUN_ADDRESS_MAYBE_MISSING.
3034
3035 2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3036
3037 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
3038 frames (revisited).
3039
3040 Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
3041
3042 * Makefile.in (INIT_FILES): Append CONFIG_INITS
3043 * configure.in (CONFIG_INIT): Initialize.
3044 (links): Link srcdir/gdbtk/library to gdbtcl2.
3045 * gdbtcl2: Moved to gdbtk/library.
3046 ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
3047 gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
3048 gdbtk.h: Moved to gdbtk/generic.
3049
3050 2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3051
3052 * printcmd.c (build_address_symbolic): New function. Returns all
3053 the parts that are necessary to print an address in a symbolic
3054 form.
3055 (print_address_symbolic): Split into a printing part and an
3056 information building part, build_address_symbolic().
3057
3058 * defs.h (build_address_symbolic): Export.
3059
3060 2000-02-03 Jim Blandy <jimb@redhat.com>
3061
3062 * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
3063 opcode.
3064
3065 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
3066
3067 * arm-tdep.c (arm_push_arguments): Fix passing of floating point
3068 arguments on dummy frames.
3069
3070 2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
3071
3072 * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
3073 (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
3074
3075 2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3076
3077 * remote.c (getpkt_sane): New function. It is the old getpkt(),
3078 which now returns a timeout indication.
3079 (getpkt): New function. Wrapper for getpkt_sane(), so that return
3080 value can still be ignored.
3081
3082 Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
3083
3084 * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
3085 UI_OUT.
3086
3087 Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
3088
3089 * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
3090 ``struct gdb_file'' to ``struct ui_file''. Delete typedef
3091 GDB_FILE.
3092
3093 * Makefile.in: Update.
3094
3095 * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
3096 c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
3097 ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
3098 cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
3099 expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
3100 frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
3101 gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
3102 jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
3103 m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
3104 printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
3105 remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
3106 ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
3107 serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
3108 target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
3109 utils.c, v850ice.c, valprint.c, valprint.h, value.h,
3110 config/pa/tm-hppa.h: Update.
3111 * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
3112
3113 2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
3114
3115 * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
3116 config/i386/i386dgux.mh, config/i386/i386sol2.mh,
3117 config/i386/i386v4.mh, config/i386/i386v42mp.mh,
3118 config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
3119 config/m88k/delta88v4.mh, config/mips/irix4.mh,
3120 config/mips/irix5.mh, config/mips/mipsv4.mh,
3121 config/powerpc/solaris.mh (NATDEPFILES): Change references to
3122 proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
3123 proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
3124
3125 Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
3126
3127 * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
3128
3129 * main.c (captured_main): Only use the legacy tui_file code when
3130 linking in older code such as the TUI.
3131
3132 * gdb-file.h, gdb-file.c: New files.
3133 * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
3134 null_file_isatty, null_file_rewind, null_file_put,
3135 null_file_flush, null_file_write, null_file_fputs,
3136 null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
3137 gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
3138 set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
3139 set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
3140 set_gdb_file_data, struct accumulated_gdb_file,
3141 do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
3142 mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
3143 mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
3144 stdio_file_delete, stdio_file_flush, stdio_file_write,
3145 stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
3146 Moved to gdb-file.h and gdb-file.c.
3147 * utils.c (enum streamtype, struct tui_stream, tui_file_new,
3148 tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
3149 tui_file_rewind, tui_file_put, tui_file_fputs,
3150 tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
3151 fputs_unfiltered_hook):
3152 Moved to tui/tui-file.c and tui/tui-file.h.
3153
3154 * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
3155 (tui-file.o, gdb-file.o): Add dependencies.
3156 (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
3157 * main.c: #include tui/tui-file.h.
3158
3159 2000-01-28 Fred Fish <fnf@cygnus.com>
3160
3161 * findvar.c (value_from_register): Special case handling of D10V
3162 pointer values fetched from registers.
3163
3164 2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
3165
3166 * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
3167 support for new style thumb prologues.
3168
3169 2000-01-28 Nick Clifton <nickc@redhat.com>
3170
3171 * arm-tdep.c: Remove extraneous dash at start of strings
3172 introduced in previous delta.
3173
3174 2000-01-27 Nick Clifton <nickc@redhat.com>
3175
3176 * arm-tdep.c: Replace uses of arm_toggle_renames() with
3177 parse_arm_disassembler_option().
3178
3179 2000-01-27 Jim Blandy <jimb@cygnus.com>
3180
3181 * symtab.c (decode_line_1): Don't let commas that are within
3182 quotes or parenthesis terminate the line spec. Don't use pp when
3183 removing the final double quote of a double-quoted string. Don't
3184 forget to skip the opening double quote. I have no clue whether
3185 this change is correct; probably we've just moved this function
3186 from one buggy place to another buggy place, and never came within
3187 an outhouse whiff of correctness.
3188 (find_toplevel_char): New function.
3189
3190 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3191
3192 * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
3193 passing the pointer to a thumb function as an argument.
3194
3195 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3196
3197 * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
3198 are reinserted for another run.
3199
3200 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3201
3202 * cli-out.c (cli_filed_string): Test for NULL string.
3203
3204 2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
3205
3206 * infcmd.c (run_stack_dummy): Account for a random signal stopping
3207 the inferior as well as breakpoints being hit while performing an
3208 inferior function call.
3209 * valops.c (hand_function_call): Ditto.
3210
3211 2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3212
3213 From Mark Kettenis <kettenis@gnu.org>
3214
3215 * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
3216 i386_REGS_SEGS_STATE.
3217 (HAVE_I387_REGS): Define.
3218 (FLOAT_INFO): Remove.
3219 * i386gnu-nat.c: Almost completely rewritten to use new i386
3220 register layout and `float info' implementation.
3221 * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
3222 Move prototypes from here.
3223 * gnu-nat.h: To here.
3224
3225 2000-01-24 Kevin Buettner <kevinb@redhat.com>
3226
3227 * utils.c (get_field, put_field): Fix buffer underruns and
3228 overruns. Also, handle case where total_len is not evenly
3229 divisible by 8.
3230 (getfield): Make sure zeroing of unwanted bits occurs even
3231 when bit field to extract does not straddle two or more
3232 bytes.
3233
3234 2000-01-23 Christopher Faylor <cgf@cygnus.com>
3235
3236 * defs.h: Add gdb_thread_select declaration.
3237
3238 2000-01-23 Kevin Buettner <kevinb@redhat.com>
3239
3240 * linux-thread.c (_initialize_linuxthreads): Make sure that
3241 linuxthreads_block_mask does not block SIGCHLD.
3242
3243 2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
3244
3245 * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
3246 text so that new lines work properly.
3247
3248 2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3249
3250 * proc-utils.h: New file. Export functions from proc-*.c.
3251
3252 * proc_api.c: Rename to:
3253 * proc-api.c: New file. Add include of proc-utils.h.
3254
3255 * proc_events.c: Rename to:
3256 * proc-events.c: New file.
3257
3258 * proc_flags.c: Rename to:
3259 * proc-flags.c: New file.
3260
3261 * proc_why.c: Rename to:
3262 * proc-why.c: New file. Add include of proc-utils.h.
3263
3264 * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
3265 ctype.h, proc-utils.h.
3266 (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
3267 (open_procinfo_files): Conditionalize local variable tmp, to avoid
3268 compiler warnings.
3269 (proc_iterate_over_mappings): Conditionalize local vars mapfd and
3270 pathname.
3271 (procfs_wait): Adjust format in some printf_filetered calls to
3272 avoid compiler warnings.
3273 (make_signal_thread_runnable): Ifdef 0. The calls to this function
3274 are also ifdef'd 0 .
3275 (procfs_resume): Add parentheses around '&&' operation.
3276 (procfs_set_exec_trap): Remove unused variable.
3277 (info_proc_cmd): Add braces to avoid ambiguous else clause.
3278
3279 * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
3280 proc-why.o): Update dependencies.
3281
3282 * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
3283 proc-*.o.
3284
3285 2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
3286
3287 * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
3288 Fix from Robert Lipe <robertl@sco.com>.
3289 * configure: Regenerated.
3290
3291 2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3292
3293 * stack.c (print_frame_info_base): Break up into the frame info
3294 (location) printing part and the rest (source line printing).
3295 (print_frame): New function. Take care of printing the location
3296 information.
3297 Update copyright.
3298
3299 * infrun.c (normal_stop): Use enum values rather than integers for the
3300 source_flag to be passed to show_and_print_stack_frame().
3301 Update copyright.
3302
3303 * frame.h (print_what): New enum for 'source' argument to
3304 print_frame_info_base(). Use this instead of obscure numbers.
3305 Update copyright.
3306
3307 Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
3308
3309 * event-top.c (stdin_event_handler): call quit_command rather than
3310 exit -- run cleanups, give target code a chance to say goodbye to
3311 the target. Fixes bug where the inferior processes were left
3312 around on Solaris (and probably elsewhere) by the testsuite.
3313
3314 2000-01-14 Mark Salter <msalter@cygnus.com>
3315
3316 * v850-tdep.c (v850_target_architecture_hook): Setup correct
3317 machine id for disassembly.
3318
3319 2000-01-13 Jim Blandy <jimb@cygnus.com>
3320
3321 * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
3322 convert_to_regset, when regno indicates a specific register.
3323
3324 Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
3325
3326 * uw-thread.c: Document libthread.so debugging interface. Minor
3327 comment and formatting tweaks.
3328 (DEBUG): #define as 0 instead of 1.
3329 (CALL_BASE): Include function name in error msg.
3330 (libthread_stub): Adjust inferior_pid after thread exit.
3331 (uw_thread_create_inferior): Deactivate uw_thread_ops before
3332 asking procfs_ops to create inferior.
3333 (libthread_init): Don't return nonlocally on error.
3334
3335 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
3336
3337 * rdi-share/ardi.c (negotiate_params): Fix initialization of static
3338 variable.
3339
3340 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
3341
3342 * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
3343 both sides are on the same state.
3344
3345 2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
3346
3347 * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
3348 115200 (minor syntax mistake).
3349
3350 2000-01-12 Jim Blandy <jimb@cygnus.com>
3351
3352 * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
3353 this here, to go along with the definitions of PIDGET and TIDGET.
3354
3355 2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3356
3357 * thread.c (do_captured_thread_select): New function. Switch
3358 current thread, safely from within catch_errors().
3359 (gdb_thread_select): New function. Switch threads safely.
3360 (thread_command): Use gdb_thread_select().
3361 Include ui-out.h.
3362 (do_captured_list_thread_ids): New function.
3363 (gdb_list_thread_ids): New function.
3364
3365 * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
3366
3367 2000-01-11 Christopher Faylor <cgf@cygnus.com>
3368
3369 * configure.in: Avoid linking -limagehlp unless it's a native build.
3370 * configure: Regenerate.
3371 * thread.cc (add_thread): Clear private data pointer here or suffer
3372 strange behavior when it is checked for NULL later.
3373
3374 2000-01-09 Christopher Faylor <cgf@cygnus.com>
3375
3376 * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
3377 * configure.in: Add an additional library to cygwin link.
3378 * configure: Regenerate.
3379
3380 Patch from Egor Duda <deo@logos-m.ru>:
3381 * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
3382 type.
3383
3384 2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
3385
3386 * uw-thread.c: New file to support UnixWare user-mode threads:
3387 contributed by Nickolas Duffek <nsd@cygnus.com>.
3388 * target.h (struct target_ops): New vector, to_extra_thread_info,
3389 allows back-ends to give extra details in info thread display.
3390 (target_extra_thread_info): define new macro.
3391 (target_find_new_threads): simplify macro. Cleanup comments.
3392 * target.c (to_extra_thread_info): default and inherit new vector.
3393 (cleanup_target): eliminate PARAMS, break up long lines,
3394 provide default definition for to_extra_thread_info, and
3395 to_find_new_threads. Default to_thread_alive and to_query
3396 to return_zero, not target_ignore (they each return int not void).
3397 (debug_to_find_new_threads): new debug entry.
3398 (setup_target_debug): add debug_to_find_new_threads.
3399 * gdbthread.h: export struct thread_info, find_thread_pid, and
3400 iterate_over_threads. Add comments. Eliminate PARAMS. Update
3401 copyright. Add new private data pointer for use by target back-ends.
3402 * thread.c (struct thread_info): move definition to gdbthread.h.
3403 (find_thread_pid): new exported function for thread lookup.
3404 (iterate_over_threads): new exported function for applying
3405 arbitrary operations to threads. Update copyright to 2000.
3406 (info_threads_command): use new target_extra_thread_info vector
3407 to display extra information about each thread (if implemented).
3408 * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
3409 Add defines for PIDGET, etc.
3410 * config/i386/tm-i386sol2.h: ditto.
3411 * config/sparc/tm-sun4sol2.h: ditto.
3412 * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
3413 * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
3414 if -lpthread and -lpthreads fail.
3415
3416 * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
3417 (proc_flags): combine flags that UnixWare splits into two locations.
3418 (proc_modify_flag): add support for PR_KLC (kill on last close).
3419 (proc_[un]set_kill_on_last_close): new functions.
3420
3421 2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3422
3423 * infrun.c (normal_stop): Print out thread id when we stop.
3424
3425 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3426
3427 * remote.c (remote_open_1): Fix message so it does not imply a
3428 specific syntax for serial ports, as it is OS dependent.
3429 (remote_async_open_1): Ibid.
3430 (init_remote_ops): Ibid.
3431
3432 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3433
3434 * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
3435 "set remotebaud" command (if set) when no speed is specified on
3436 the "target rdi" command.
3437
3438 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3439
3440 * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
3441 115200.
3442 (baud_options[]): Ibid.
3443
3444 2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
3445
3446 * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
3447 used by each operating system.
3448
3449 2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
3450
3451 * breakpoint.c (until_break_command): Add an argument for the
3452 continuation, the beginning of the cleanups set up by this
3453 command.
3454 (until_break_command_continuation): Do cleanups until the one
3455 passed in as argument instead of doing all of them.
3456
3457 * infcmd.c (finish_command_continuation): Expect a new argument,
3458 which indicates up to where to do cleanups. Update calls to
3459 do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
3460 (finish_command): Add another argument for the continuation: the
3461 starting cleanup for this command.
3462
3463 2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
3464
3465 From Grant Edwards <grante@visi.com> (original patch from Thomas
3466 Zenker ):
3467 * rdi-share/ardi.c: Allow interruption of interruptible
3468 targets with a <CNTL-C>.
3469
3470 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3471
3472 * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
3473 to control port to accommodate some versions of Angel.
3474
3475 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3476
3477 * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
3478 Add interpretation for C Support Library packets.
3479
3480 2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
3481
3482 * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
3483 is now being modified.
3484 * rdi-share/devsw.h: Adjust declaration of the above funtion.
3485
3486 For older changes see ChangeLog-99
3487 \f
3488 Local Variables:
3489 mode: change-log
3490 left-margin: 8
3491 fill-column: 74
3492 version-control: never
3493 End:
This page took 0.221808 seconds and 5 git commands to generate.