gdb/ChangeLog

   1 2014-02-13  Sanimir Agovic  <sanimir.agovic@intel.com>
   2
   3         * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
   4         (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
   5         * h8300-tdep.c (setmachinelist): Remove global.
   6         * hppa-tdep.c (hppa_sigtramp): Remove global.
   7         * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
   8         RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
   9         * ravenscar-thread.c (update_target_observer): Remove global.
  10         * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.
  11
  12 2014-02-12  Tom Tromey  <tromey@redhat.com>
  13
  14         * common/rsp-low.c: Update comments.
  15         * common/rsp-low.h: Update comments.
  16
  17 2014-02-12  Tom Tromey  <tromey@redhat.com>
  18
  19         * common/rsp-low.c (convert_ascii_to_int): Remove.
  20         * common/rsp-low.h (convert_ascii_to_int): Don't declare.
  21
  22 2014-02-12  Tom Tromey  <tromey@redhat.com>
  23
  24         * common/rsp-low.h (unhexify): Don't declare.
  25         * common/rsp-low.c (unhexify): Remove.
  26
  27 2014-02-12  Tom Tromey  <tromey@redhat.com>
  28
  29         * common/rsp-low.h (convert_int_to_ascii): Don't declare.
  30         * common/rsp-low.c (convert_int_to_ascii): Remove.
  31
  32 2014-02-12  Tom Tromey  <tromey@redhat.com>
  33
  34         * common/rsp-low.h (hexify): Don't declare.
  35         * common/rsp-low.c (hexify): Remove.
  36
  37 2014-02-12  Tom Tromey  <tromey@redhat.com>
  38
  39         * common/rsp-low.c (hexify): Never take strlen of argument.
  40
  41 2014-02-12  Tom Tromey  <tromey@redhat.com>
  42
  43         * common/rsp-low.c (bin2hex): Never take strlen of argument.
  44         * remote.c (extended_remote_run, remote_rcmd)
  45         (remote_download_trace_state_variable, remote_save_trace_data)
  46         (remote_set_trace_notes): Update.
  47         * tracepoint.c (encode_source_string, tfile_write_status)
  48         (tfile_write_uploaded_tsv): Update.
  49
  50 2014-02-12  Tom Tromey  <tromey@redhat.com>
  51
  52         * tracepoint.c: Include rsp-low.h.
  53         * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
  54         * remote.c: Include rsp-low.h.
  55         (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
  56         (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
  57         (remote_unescape_input): Move to common/rsp-low.c.
  58         * common/rsp-low.h: New file.
  59         * common/rsp-low.c: New file.
  60         * Makefile.in (SFILES): Add common/rsp-low.c.
  61         (HFILES_NO_SRCDIR): Add common/rsp-low.h.
  62         (COMMON_OBS): Add rsp-low.o.
  63         (rsp-low.o): New target.
  64
  65 2014-02-12  Tom Tromey  <tromey@redhat.com>
  66
  67         * utils.h: Include print-utils.h.
  68         (host_address_to_string, plongest, pulongest, phex, phex_nz)
  69         (int_string, core_addr_to_string, core_addr_to_string_nz)
  70         (hex_string, hex_string_custom): Don't declare.
  71         * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
  72         (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
  73         (hex_string_custom, int_string, core_addr_to_string)
  74         (core_addr_to_string_nz, host_address_to_string): Move to
  75         common/print-utils.c.
  76         * common/print-utils.h: New file.
  77         * common/print-utils.c: New file
  78         * Makefile.in (SFILES): Add common/print-utils.c.
  79         (HFILES_NO_SRCDIR): Add common/print-utils.h.
  80         (COMMON_OBS): Add print-utils.o.
  81         (print-utils.o): New target.
  82
  83 2014-02-12  Tom Tromey  <tromey@redhat.com>
  84
  85         * nios2-tdep.c (nios2_stub_frame_base_address): Remove.
  86
  87 2014-02-12  Mark Kettenis  <kettenis@gnu.org>
  88
  89         * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.
  90
  91 2014-02-12  Mark Kettenis  <kettenis@gnu.org>
  92
  93         * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
  94         if a PT_IO ptrace request returns sucessfully but indicates that 0
  95         bytes were transferred.
  96
  97 2014-02-12  Pedro Alves  <palves@redhat.com>
  98             Kevin Buettner <kevinb@redhat.com>
  99
 100         * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
 101         TYPE_INSTANCE_FLAG_CODE_SPACE.
 102
 103 2014-02-12  Pedro Alves  <palves@redhat.com>
 104
 105         * h8300-tdep.c (pseudo_from_raw_register)
 106         (raw_from_pseudo_register): New functions.
 107         (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
 108         them.
 109
 110 2014-02-12  Pedro Alves  <palves@redhat.com>
 111
 112         * h8300-tdep.c (h8300_register_sim_regno): New function.
 113         (h8300_gdbarch_init): Install h8300_register_sim_regno as
 114         gdbarch_register_sim_regno hook.
 115
 116 2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>
 117
 118         * nios2-tdep.c (nios2_stub_frame_base): Remove global.
 119
 120 2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>
 121
 122         * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
 123
 124 2014-02-12  Mark Kettenis  <kettenis@gnu.org>
 125
 126         * obsd-tdep.h (obsd_init_abi): New prototype.
 127         * obsd-tdep.c: Define enum with OpenBSD signal numbers.
 128         (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
 129         (obsd_init_abi): New functions.
 130         * i386obsd-tdep.c: Include "obsd-tdep.h".
 131         (i386obsd_init_abi): Call obsd_init_abi.
 132         * amd64obsd-tdep.c: Include "obsd-tdep.h".
 133         (amd64obsd_init_abi): Call obsd_init_abi.
 134         * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
 135         obsd-tdep.c to gdb_target_obs.
 136
 137 2014-02-11  Jose E. Marchesi  <jose.marchesi@oracle.com>
 138
 139         * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
 140         double float arguments to 16-byte in the argument slots.
 141
 142 2014-02-11  Doug Evans  <xdje42@gmail.com>
 143
 144         * configure.ac: Don't crash if pkg-config is not found and guile
 145         wasn't explicitly requested.  Use AC_MSG_ERROR instead of AC_ERROR
 146         in guile checks.
 147         * configure: Regenerate.
 148
 149 2014-02-11  Yao Qi  <yao@codesourcery.com>
 150
 151         * aix-thread.c (aix_thread_xfer_partial): Update comments.
 152         * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
 153         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
 154         * gnu-nat.c (gnu_xfer_memory): Likewise.
 155         * inf-ptrace.c (inf_ptrace_xfer_partial):  Likewise.
 156         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
 157         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
 158         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
 159
 160 2014-02-11  Yao Qi  <yao@codesourcery.com>
 161
 162         * target.h (enum target_xfer_error): Rename to ...
 163         (enum target_xfer_status): ... it.  New.  All users updated.
 164         (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
 165         New.
 166         (TARGET_XFER_STATUS_ERROR_P): New macro.
 167         (target_xfer_error_to_string): Remove declaration.
 168         (target_xfer_status_to_string): Declare.
 169         (target_xfer_partial_ftype): Adjust it.
 170         (struct target_ops) <to_xfer_partial>: Return
 171         target_xfer_status.  Add argument xfered_len.  Update
 172         comments.
 173         * target.c (target_xfer_error_to_string): Rename to ...
 174         (target_xfer_status_to_string): ... it.  New.  All callers
 175         updated.
 176         (target_read_live_memory): Likewise.  Call target_xfer_partial
 177         instead of target_read.
 178         (memory_xfer_live_readonly_partial): Return
 179         target_xfer_status.  Add argument xfered_len.
 180         (raw_memory_xfer_partial): Likewise.
 181         (memory_xfer_partial_1): Likewise.
 182         (memory_xfer_partial): Likewise.
 183         (target_xfer_partial): Likewise.  Check *XFERED_LEN is set
 184         properly.  Update debug message.
 185         (default_xfer_partial, current_xfer_partial): Likewise.
 186         (target_write_partial): Likewise.
 187         (target_read_partial): Likewise.  All callers updated.
 188         (read_whatever_is_readable): Likewise.
 189         (target_write_with_progress): Likewise.
 190         (target_read_alloc_1): Likewise.
 191
 192         * aix-thread.c (aix_thread_xfer_partial): Likewise.
 193         * auxv.c (procfs_xfer_auxv): Likewise.
 194         (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
 195         * bfd-target.c (target_bfd_xfer_partial): Likewise.
 196         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
 197         * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
 198         * corefile.c (read_memory): Adjust.
 199         * corelow.c (core_xfer_partial): Likewise.
 200         * ctf.c (ctf_xfer_partial): Likewise.
 201         * darwin-nat.c (darwin_read_dyld_info): Likewise.  All callers
 202         updated.
 203         (darwin_xfer_partial): Likewise.
 204         * exec.c (section_table_xfer_memory_partial): Likewise.  All
 205         callers updated.
 206         (exec_xfer_partial): Likewise.
 207         * exec.h (section_table_xfer_memory_partial): Update
 208         declaration.
 209         * gnu-nat.c (gnu_xfer_memory): Likewise.  Assert 'res' is not
 210         negative.
 211         (gnu_xfer_partial): Likewise.
 212         * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
 213         (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
 214         (ia64_hpux_xfer_solib_got): Likewise.
 215         * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.  Change
 216         type of 'partial_len' to ULONGEST.
 217         * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
 218         * linux-nat.c (linux_xfer_siginfo ): Likewise.
 219         (linux_nat_xfer_partial): Likewise.
 220         (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
 221         (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
 222         * monitor.c (monitor_xfer_memory): Likewise.
 223         (monitor_xfer_partial): Likewise.
 224         * procfs.c (procfs_xfer_partial): Likewise.
 225         * record-btrace.c (record_btrace_xfer_partial): Likewise.
 226         * record-full.c (record_full_xfer_partial): Likewise.
 227         (record_full_core_xfer_partial): Likewise.
 228         * remote-sim.c (gdbsim_xfer_memory): Likewise.
 229         (gdbsim_xfer_partial): Likewise.
 230         * remote.c (remote_write_bytes_aux): Likewise.  All callers
 231         updated.
 232         (remote_write_bytes, remote_read_bytes): Likewise.  All
 233         callers updated.
 234         (remote_flash_erase): Likewise.  All callers updated.
 235         (remote_write_qxfer): Likewise.  All callers updated.
 236         (remote_read_qxfer): Likewise.  All callers updated.
 237         (remote_xfer_partial): Likewise.
 238         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
 239         (rs6000_xfer_shared_libraries): Likewise.
 240         * sol-thread.c (sol_thread_xfer_partial): Likewise.
 241         (sol_thread_xfer_partial): Likewise.
 242         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
 243         (sparc_xfer_partial): Likewise.
 244         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.  All callers
 245         updated.
 246         (spu_xfer_partial): Likewise.
 247         * spu-multiarch.c (spu_xfer_partial): Likewise.
 248         * tracepoint.c (tfile_xfer_partial): Likewise.
 249         * windows-nat.c (windows_xfer_memory): Likewise.
 250         (windows_xfer_shared_libraries): Likewise.
 251         (windows_xfer_partial): Likewise.
 252         * valprint.c: Replace 'target_xfer_error' with
 253         'target_xfer_status' in comments.
 254
 255 2014-02-11  Simon Marchi  <simon.marchi@ericsson.com>  (tiny patch)
 256
 257         Checked in by Joel Brobecker <brobecker@adacore.com>.
 258         * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
 259
 260 2014-02-11  Joel Brobecker  <brobecker@adacore.com>
 261
 262         * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
 263         function parameters.
 264
 265 2014-02-10  Will Newton  <will.newton@linaro.org>
 266
 267         * elfread.c (elf_rel_plt_read): Look for a .got section if
 268         looking up .got.plt fails.
 269         (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
 270         on address passed to elf_gnu_ifunc_record_cache.
 271         (elf_gnu_ifunc_resolve_addr): Likewise.
 272         (elf_gnu_ifunc_resolver_return_stop): Likewise.
 273
 274 2014-02-10  Jose E. Marchesi  <jose.marchesi@oracle.com>
 275
 276         * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
 277         (X_RETTURN): New macro.
 278         * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
 279
 280         * sparc64-tdep.c (sparc64_init_abi): Hook
 281         sparc_in_function_epilogue_p.
 282
 283 2014-02-10  Gary Benson  <gbenson@redhat.com>
 284
 285         * symfile-debug.c (debug_qf_expand_symtabs_matching):
 286         Rename name_matcher to symbol_matcher.
 287
 288 2014-02-10  Gary Benson  <gbenson@redhat.com>
 289
 290         * symfile-debug.c (debug_qf_expand_symtabs_matching):
 291         Use expand_symtabs_file_matcher_ftype and
 292         expand_symtabs_symbol_matcher_ftype.
 293
 294 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
 295
 296         * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
 297         (struct ada_symbol_cache): New.
 298         (ada_free_symbol_cache): Forward declare.
 299         (struct ada_pspace_data): New.
 300         (ada_pspace_data_handle): New static global.
 301         (get_ada_pspace_data, ada_pspace_data_cleanup)
 302         (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
 303         (cache_space, cache): Delete, now folded inside struct
 304         ada_pspace_data.
 305         (ada_get_symbol_cache): New function.
 306         (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
 307         implementation.
 308         (_initialize_ada_language): Remove initialization of cache_space.
 309         Move call to observer_attach_inferior_exit up, grouping it
 310         with the other observer registrations inside this function.
 311         Rename command to be more general.  Add call to
 312         register_program_space_data_with_cleanup.
 313
 314 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
 315
 316         * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
 317         ada_new_objfile_observer.
 318         (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
 319         (_initialize_tasks): Update uses of ada_new_objfile_observer
 320         and ada_tasks_normal_stop_observer.
 321
 322 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
 323
 324         * ada-lang.c (ada_evaluate_subexp): Set the type of the value
 325         returned by the 'Length attribute to integer.
 326
 327 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
 328
 329         * ada-lang.c (_initialize_ada_language): Initialize
 330         cache_space obstack.
 331
 332 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
 333
 334         * ada-lang.c (HASH_SIZE): New macro.
 335         (struct cache_entry): New type.
 336         (cache_space, cache): New static globals.
 337         (ada_clear_symbol_cache, find_entry): New functions.
 338         (lookup_cached_symbol, cache_symbol): Implement.
 339         (ada_new_objfile_observer, ada_free_objfile_observer): New.
 340         (_initialize_ada_language): Attach ada_new_objfile_observer
 341         and ada_free_objfile_observer.
 342
 343 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
 344
 345         * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
 346         (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
 347         struct block * parameter.
 348         (ada_lookup_symbol_list_worker): Constify local variable "block".
 349         Remove cast which is no longer necessary.
 350
 351 2014-02-10  Doug Evans  <xdje42@gmail.com>
 352
 353         Add Guile as an extension language.
 354         * NEWS: Mention Guile scripting.
 355         * Makefile.in (SUBDIR_GUILE_OBS): New variable.
 356         (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
 357         (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
 358         (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
 359         (CLIBS): Add GUILE_LIBS.
 360         (install-guile): New rule.
 361         (guile.o): New rule.
 362         (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
 363         (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
 364         (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
 365         (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
 366         (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
 367         (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
 368         (scm-type.o, scm-utils.o, scm-value.o): New rules.
 369         * configure.ac: New option --with-guile.
 370         * configure: Regenerate.
 371         * config.in: Regenerate.
 372         * auto-load.c: Remove #include "python/python.h".  Add #include
 373         "gdb/section-scripts.h".
 374         (source_section_scripts): Handle Guile scripts.
 375         (_initialize_auto_load): Add name of Guile objfile script to
 376         scripts-directory help text.
 377         * breakpoint.c (condition_command): Tweak comment to include Scheme.
 378         * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
 379         (struct breakpoint): New member scm_bp_object.
 380         * defs.h (enum command_control_type): New value guile_control.
 381         * cli/cli-cmds.c: Remove #include "python/python.h".  Add #include
 382         "extension.h".
 383         (show_user): Update comment.
 384         (_initialize_cli_cmds): Update help text for "show user".  Update help
 385         text for max-user-call-depth.
 386         * cli/cli-script.c: Remove #include "python/python.h".  Add #include
 387         "extension.h".
 388         (multi_line_command_p): Add guile_control.
 389         (print_command_lines): Handle guile_control.
 390         (execute_control_command, recurse_read_control_structure): Ditto.
 391         (process_next_line): Recognize "guile" commands.
 392         * disasm.c (gdb_disassemble_info): Make non-static.
 393         * disasm.h: #include "dis-asm.h".
 394         (struct gdbarch): Add forward decl.
 395         (gdb_disassemble_info): Declare.
 396         * extension.c: #include "guile/guile.h".
 397         (extension_languages): Add guile.
 398         (get_ext_lang_defn): Handle EXT_LANG_GDB.
 399         * extension.h (enum extension_language): New value EXT_LANG_GUILE.
 400         * gdbtypes.c (get_unsigned_type_max): New function.
 401         (get_signed_type_minmax): New function.
 402         * gdbtypes.h (get_unsigned_type_max): Declare.
 403         (get_signed_type_minmax): Declare.
 404         * guile/README: New file.
 405         * guile/guile-internal.h: New file.
 406         * guile/guile.c: New file.
 407         * guile/guile.h: New file.
 408         * guile/scm-arch.c: New file.
 409         * guile/scm-auto-load.c: New file.
 410         * guile/scm-block.c: New file.
 411         * guile/scm-breakpoint.c: New file.
 412         * guile/scm-disasm.c: New file.
 413         * guile/scm-exception.c: New file.
 414         * guile/scm-frame.c: New file.
 415         * guile/scm-gsmob.c: New file.
 416         * guile/scm-iterator.c: New file.
 417         * guile/scm-lazy-string.c: New file.
 418         * guile/scm-math.c: New file.
 419         * guile/scm-objfile.c: New file.
 420         * guile/scm-ports.c: New file.
 421         * guile/scm-pretty-print.c: New file.
 422         * guile/scm-safe-call.c: New file.
 423         * guile/scm-string.c: New file.
 424         * guile/scm-symbol.c: New file.
 425         * guile/scm-symtab.c: New file.
 426         * guile/scm-type.c: New file.
 427         * guile/scm-utils.c: New file.
 428         * guile/scm-value.c: New file.
 429         * guile/lib/gdb.scm: New file.
 430         * guile/lib/gdb/boot.scm: New file.
 431         * guile/lib/gdb/experimental.scm: New file.
 432         * guile/lib/gdb/init.scm: New file.
 433         * guile/lib/gdb/iterator.scm: New file.
 434         * guile/lib/gdb/printing.scm: New file.
 435         * guile/lib/gdb/types.scm: New file.
 436         * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
 437         (VPATH): Add $(GUILE_SRCDIR).
 438         (GUILE_DIR): New variable.
 439         (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
 440         (all): Add stamp-guile dependency.
 441         (stamp-guile): New rule.
 442         (clean-guile, install-guile, uninstall-guile): New rules.
 443         (install-only): Add install-guile dependency.
 444         (uninstall): Add uninstall-guile dependency.
 445         (clean): Add clean-guile dependency.
 446
 447 2014-02-09  Doug Evans  <xdje42@gmail.com>
 448
 449         Revert this patch (which I approved, mea culpa).
 450
 451         2014-02-08  Mark Kettenis  <kettenis@gnu.org>
 452
 453         * Makefile.in (all-lib): Remove.
 454         ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
 455
 456 2014-02-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
 457
 458         Fix Python stack corruption.
 459         * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
 460         gdb_py_longest.
 461
 462 2014-02-08  Mark Kettenis  <kettenis@gnu.org>
 463
 464         * Makefile.in (all-lib): Remove.
 465         ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
 466
 467 2014-02-07  Doug Evans  <dje@google.com>
 468
 469         * extension-priv.h (extension_language_script_ops): Add comment.
 470         (extension_language_ops): Add comment.
 471         (active_ext_lang_state): Fix typo in comment.
 472
 473 2014-02-07  Pedro Alves  <palves@redhat.com>
 474
 475         * infrun.c (handle_signal_stop) <signal arrives while stepping
 476         over a breakpoint>: Switch back to the stepping thread.
 477
 478 2014-02-07  Yao Qi  <yao@codesourcery.com>
 479
 480         * target.c (target_xfer_partial): Return zero if LEN is zero.
 481
 482 2014-02-07  Yao Qi  <yao@codesourcery.com>
 483
 484         * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
 485         (ld_so_xfer_auxv): Likewise.
 486         * bfd-target.c (target_bfd_xfer_partial): Likewise.
 487         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
 488         * corelow.c (core_xfer_partial): Likewise.
 489         * ctf.c (ctf_xfer_partial): Likewise.
 490         * darwin-nat.c (darwin_read_dyld_info): Likewise.
 491         (darwin_xfer_partial): Likewise.
 492         * exec.c (exec_xfer_partial): Likewise.
 493         * gnu-nat.c (gnu_xfer_partial): Likewise.
 494         * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
 495         * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
 496         * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
 497         * linux-nat.c (linux_xfer_siginfo): Likewise.
 498         (linux_proc_xfer_spu): Likewise.
 499         * procfs.c (procfs_xfer_partial): Likewise.
 500         * record-full.c (record_full_xfer_partial): Likewise.
 501         (record_full_core_xfer_partial): Likewise.
 502         * remote-sim.c (gdbsim_xfer_partial): Likewise.
 503         * remote.c (remote_write_qxfer): Likewise.
 504         (remote_write_qxfer, remote_read_qxfer): Likewise.
 505         (remote_xfer_partial): Likewise.
 506         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
 507         (rs6000_xfer_shared_libraries): Likewise.
 508         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
 509         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
 510         (spu_xfer_partial): Likewise.
 511         * target.c (memory_xfer_partial_1): Likewise.
 512         * tracepoint.c (tfile_xfer_partial): Likewise.
 513         * windows-nat.c (windows_xfer_shared_libraries): Likewise.
 514         (windows_xfer_partial): Likewise.
 515
 516 2014-02-07  Yao Qi  <yao@codesourcery.com>
 517
 518         * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST.  Add
 519         comments.
 520         (core_xfer_shared_libraries_aix): Likewise.
 521         * gdbarch.c, gdbarch.h: Regenerated.
 522         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
 523         ULONGEST.  Change 'len_avail' type to ULONGEST.
 524         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
 525         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
 526         declaration.
 527         (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
 528
 529 2014-02-07  Yao Qi  <yao@codesourcery.com>
 530
 531         * corefile.c (memory_error): Get 'exception' from ERR and pass
 532         'exception' to throw_error.
 533
 534 2014-02-06  Doug Evans  <xdje42@gmail.com>
 535
 536         * configure.ac (libpython checking): Remove all but python.o from
 537         CONFIG_OBS.  Remove all but python.c from CONFIG_SRCS.
 538         * configure: Regenerate.
 539
 540         * Makefile.in (SFILES): Add extension.c.
 541         (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
 542         (COMMON_OBS): Add extension.o.
 543         * extension.h: New file.
 544         * extension-priv.h: New file.
 545         * extension.c: New file.
 546
 547         * python/python-internal.h: #include "extension.h".
 548         (gdbpy_auto_load_enabled): Declare.
 549         (gdbpy_apply_val_pretty_printer): Declare.
 550         (gdbpy_apply_frame_filter): Declare.
 551         (gdbpy_preserve_values): Declare.
 552         (gdbpy_breakpoint_cond_says_stop): Declare.
 553         (gdbpy_breakpoint_has_cond): Declare.
 554         (void source_python_script_for_objfile): Delete.
 555         * python/python.c: #include "extension-priv.h".
 556         Delete inclusion of "observer.h".
 557         (extension_language_python): Moved here and renamed from
 558         script_language_python in py-auto-load.c.
 559         Redefined to be of type extension_language_defn.
 560         (python_extension_script_ops): New global.
 561         (python_extension_ops): New global.
 562         (struct python_env): New member previous_active.
 563         (restore_python_env): Call restore_active_ext_lang.
 564         (ensure_python_env): Call set_active_ext_lang.
 565         (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
 566         New arg extlang.
 567         (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
 568         New arg extlang.
 569         (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
 570         New arg extlang.
 571         (gdbpy_eval_from_control_command): Renamed from
 572         eval_python_from_control_command, made static.  New arg extlang.
 573         (gdbpy_source_script) Renamed from source_python_script, made static.
 574         New arg extlang.
 575         (gdbpy_before_prompt_hook): Renamed from before_prompt_hook.  Change
 576         result to int.  New arg extlang.
 577         (gdbpy_source_objfile_script): Renamed from
 578         source_python_script_for_objfile, made static.  New arg extlang.
 579         (gdbpy_start_type_printers): Renamed from start_type_printers, made
 580         static.  New args extlang, extlang_printers.  Change result type to
 581         "void".
 582         (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
 583         static.  New arg extlang.  Rename arg printers to extlang_printers
 584         and change type to ext_lang_type_printers *.
 585         (gdbpy_free_type_printers): Renamed from free_type_printers, made
 586         static.  Replace argument arg with extlang, extlang_printers.
 587         (!HAVE_PYTHON, eval_python_from_control_command): Delete.
 588         (!HAVE_PYTHON, source_python_script): Delete.
 589         (!HAVE_PYTHON, gdbpy_should_stop): Delete.
 590         (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
 591         (!HAVE_PYTHON, start_type_printers): Delete.
 592         (!HAVE_PYTHON, apply_type_printers): Delete.
 593         (!HAVE_PYTHON, free_type_printers): Delete.
 594         (_initialize_python): Delete call to observer_attach_before_prompt.
 595         (finalize_python): Set/restore active extension language.
 596         (gdbpy_finish_initialization) Renamed from
 597         finish_python_initialization, made static.  New arg extlang.
 598         (gdbpy_initialized): New function.
 599         * python/python.h: #include "extension.h".  Delete #include
 600         "value.h", "mi/mi-cmds.h".
 601         (extension_language_python): Declare.
 602         (GDBPY_AUTO_FILE_NAME): Delete.
 603         (enum py_bt_status): Moved to extension.h and renamed to
 604         ext_lang_bt_status.
 605         (enum frame_filter_flags): Moved to extension.h.
 606         (enum py_frame_args): Moved to extension.h and renamed to
 607         ext_lang_frame_args.
 608         (finish_python_initialization): Delete.
 609         (eval_python_from_control_command): Delete.
 610         (source_python_script): Delete.
 611         (apply_val_pretty_printer): Delete.
 612         (apply_frame_filter): Delete.
 613         (preserve_python_values): Delete.
 614         (gdbpy_script_language_defn): Delete.
 615         (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
 616         (start_type_printers, apply_type_printers, free_type_printers): Delete.
 617
 618         * auto-load.c: #include "extension.h".
 619         (GDB_AUTO_FILE_NAME): Delete.
 620         (auto_load_gdb_scripts_enabled): Make public.  New arg extlang.
 621         (script_language_gdb): Delete, moved to extension.c and renamed to
 622         extension_language_gdb.
 623         (source_gdb_script_for_objfile): Delete.
 624         (auto_load_pspace_info): New member unsupported_script_warning_printed.
 625         (loaded_script): Change type of language member to
 626         struct extension_language_defn *.
 627         (init_loaded_scripts_info): Initialize
 628         unsupported_script_warning_printed.
 629         (maybe_add_script): Make static.  Change type of language arg to
 630         struct extension_language_defn *.
 631         (clear_section_scripts): Reset unsupported_script_warning_printed.
 632         (auto_load_objfile_script_1): Rewrite to use extension language API.
 633         (auto_load_objfile_script): Make public.  Remove support-compiled-in
 634         and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
 635         (source_section_scripts): Rewrite to use extension language API.
 636         (load_auto_scripts_for_objfile): Rewrite to use
 637         auto_load_scripts_for_objfile.
 638         (collect_matching_scripts_data): Change type of language member to
 639         struct extension_language_defn *.
 640         (auto_load_info_scripts): Change type of language arg to
 641         struct extension_language_defn *.
 642         (unsupported_script_warning_print): New function.
 643         (script_not_found_warning_print): Make static.
 644         (_initialize_auto_load): Rewrite construction of scripts-directory
 645         help.
 646         * auto-load.h (struct objfile): Add forward decl.
 647         (struct script_language): Delete.
 648         (struct auto_load_pspace_info): Add forward decl.
 649         (struct extension_language_defn): Add forward decl.
 650         (maybe_add_script): Delete.
 651         (auto_load_objfile_script): Declare.
 652         (script_not_found_warning_print): Delete.
 653         (auto_load_info_scripts): Update prototype.
 654         (auto_load_gdb_scripts_enabled): Declare.
 655         * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
 656         auto_load_python_scripts_enabled and made public.
 657         (script_language_python): Delete, moved to python.c.
 658         (gdbpy_script_language_defn): Delete.
 659         (info_auto_load_python_scripts): Update to use
 660         extension_language_python.
 661
 662         * breakpoint.c (condition_command): Replace call to
 663         gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
 664         (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
 665         with call to breakpoint_ext_lang_cond_says_stop.
 666         * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
 667         from gdbpy_should_stop.  Change result type to enum scr_bp_stop.
 668         New arg slang.  Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
 669         (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
 670         New arg slang.
 671         (local_setattro): Print name of extension language with existing
 672         stop condition.
 673
 674         * valprint.c (val_print, value_print): Update to call
 675         apply_ext_lang_val_pretty_printer.
 676         * cp-valprint.c (cp_print_value): Update call to
 677         apply_ext_lang_val_pretty_printer.
 678         * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
 679         (gdbpy_apply_val_pretty_printer): Renamed from
 680         apply_val_pretty_printer.  New arg extlang.
 681         (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
 682
 683         * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
 684         extension language API.
 685         * cli/cli-script.c (execute_control_command): Update to call
 686         eval_ext_lang_from_control_command.
 687
 688         * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
 689         enum ext_lang_bt_status values.  Update call to
 690         apply_ext_lang_frame_filter.
 691         (mi_cmd_stack_list_locals): Ditto.
 692         (mi_cmd_stack_list_args): Ditto.
 693         (mi_cmd_stack_list_variables): Ditto.
 694         * mi/mi-main.c: Delete #include "python/python-internal.h".
 695         Add #include "extension.h".
 696         (mi_cmd_list_features): Replace reference to python internal variable
 697         gdb_python_initialized with call to ext_lang_initialized_p.
 698
 699         * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
 700         Update to use enum ext_lang_frame_args.  Update to call
 701         apply_ext_lang_frame_filter.
 702         * python/py-framefilter.c (extract_sym): Update to use enum
 703         ext_lang_bt_status.
 704         (extract_value, py_print_type, py_print_value): Ditto.
 705         (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
 706         (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
 707         (py_print_frame): Ditto.
 708         (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
 709         New arg extlang.  Update to use enum ext_lang_bt_status.
 710
 711         * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
 712         finish_python_initialization.  Replace with call to
 713         finish_ext_lang_initialization.
 714
 715         * typeprint.c (do_free_global_table): Update to call
 716         free_ext_lang_type_printers.
 717         (create_global_typedef_table): Update to call
 718         start_ext_lang_type_printers.
 719         (find_global_typedef): Update to call apply_ext_lang_type_printers.
 720         * typeprint.h (struct ext_lang_type_printers): Add forward decl.
 721         (type_print_options): Change type of global_printers from "void *"
 722         to "struct ext_lang_type_printers *".
 723
 724         * value.c (preserve_values): Update to call preserve_ext_lang_values.
 725         * python/py-value.c: Remove #ifdef HAVE_PYTHON.
 726         (gdbpy_preserve_values): Renamed from preserve_python_values.
 727         New arg extlang.
 728         (!HAVE_PYTHON, preserve_python_values): Delete.
 729
 730         * utils.c (quit_flag): Delete, moved to extension.c.
 731         (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
 732         extension.c.
 733
 734         * eval.c: Delete #include "python/python.h".
 735         * main.c: Delete #include "python/python.h".
 736
 737         * defs.h: Update comment.
 738
 739 2014-02-06  Joel Brobecker  <brobecker@adacore.com>
 740
 741         GDB 7.7 released.
 742
 743 2014-02-05  Mark Kettenis  <kettenis@gnu.org>
 744
 745         * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
 746         defined.
 747
 748 2014-02-05  Yao Qi  <yao@codesourcery.com>
 749
 750         * remote.c (remote_pass_signals): Remove local 'buf' and use
 751         rs->buf.
 752         (remote_program_signals): Likewise.
 753
 754 2014-02-05  Yao Qi  <yao@codesourcery.com>
 755
 756         * ctf.c: Include "inferior.h" and "gdbthread.h".
 757         (CTF_PID): A new macro.
 758         (ctf_open): Call inferior_appeared and add_thread_silent.
 759         (ctf_close): Call exit_inferior_silent and set inferior_ptid.
 760         (ctf_thread_alive): New function.
 761         (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
 762
 763 2014-02-05  Yao Qi  <yao@codesourcery.com>
 764
 765         Revert this patch:
 766
 767         2013-05-24  Yao Qi  <yao@codesourcery.com>
 768
 769         * tracepoint.c (TFILE_PID): Remove.
 770         (tfile_open): Don't add thread and inferior.
 771         (tfile_close): Don't set 'inferior_ptid'.  Don't call
 772         exit_inferior_silent.
 773         (tfile_thread_alive): Remove.
 774         (init_tfile_ops): Don't set field 'to_thread_alive' of
 775         tfile_ops.
 776
 777 2014-02-04  Christian Eggers  <ceggers@gmx.de>  (tiny change)
 778
 779         * remote.c (remote_start_remote): Call remote_check_symbols even
 780         if only symbol-file (not file) has been given.
 781
 782 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 783
 784         * gdbarch.sh (skip_entrypoint): New callback.
 785         * gdbarch.c, gdbarch.h: Regenerate.
 786         * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
 787         * infrun.c (fill_in_stop_func): Likewise.
 788         * ppc-linux-tdep.c: Include "elf/ppc64.h".
 789         (ppc_elfv2_elf_make_msymbol_special): New function.
 790         (ppc_elfv2_skip_entrypoint): Likewise.
 791         (ppc_linux_init_abi): Install them for ELFv2.
 792
 793 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 794
 795         * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
 796         (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
 797         (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
 798         (ppc64_sysv_abi_return_value): Likewise.  Also, handle small
 799         structures returned in GPRs.
 800
 801 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 802
 803         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
 804         offset to the stack parameter list for the ELFv2 ABI.
 805
 806 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 807
 808         * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
 809         set_gdbarch_convert_from_func_ptr_addr and
 810         set_gdbarch_elf_make_msymbol_special for ELFv1.
 811         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
 812         function descriptors on ELFv1.
 813         (ppc64_sysv_abi_push_dummy_call): Likewise.  On ELFv2,
 814         set up r12 at function entry.
 815
 816 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 817
 818         * ppc-tdep.h (enum powerpc_elf_abi): New data type.
 819         (struct gdbarch_tdep): New member elf_abi.
 820
 821         * rs6000-tdep.c: Include "elf/ppc64.h".
 822         (rs6000_gdbarch_init): Detect ELF ABI version.
 823
 824 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 825
 826         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
 827         within a register pair holding a DFP 128-bit value on little-endian.
 828         (ppc64_sysv_abi_return_value_base): Likewise.
 829         * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
 830         (dfp_pseudo_register_write): Likewise.
 831
 832 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 833
 834         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
 835         offset on little-endian when passing _Decimal32.
 836         (ppc64_sysv_abi_return_value_base): Likewise for return values.
 837
 838 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 839
 840         * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
 841         of the overlapped FP register within the VSX register on little-
 842         endian platforms.
 843         (efpr_pseudo_register_write): Likewise.
 844
 845 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 846
 847         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
 848         offset on little-endian when passing small structures.
 849
 850 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 851
 852         * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
 853         (struct ppc64_sysv_argpos): New data structure.
 854         (ppc64_sysv_abi_push_float): Remove.
 855         (ppc64_sysv_abi_push_val): New function.
 856         (ppc64_sysv_abi_push_integer): Likewise.
 857         (ppc64_sysv_abi_push_freg): Likewise.
 858         (ppc64_sysv_abi_push_vreg): Likewise.
 859         (ppc64_sysv_abi_push_param): Likewise.
 860         (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
 861         (ppc64_sysv_abi_return_value_base): New function.
 862         (ppc64_sysv_abi_return_value): Refactor to use it.
 863
 864 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
 865
 866         * NEWS: Document new target powerpc64le-*-linux*.
 867
 868 2014-02-04  Mark Kettenis  <kettenis@gnu.org>
 869
 870         * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
 871         (sparc64obsd_supply_gregset): Handle registers sets used in ELF
 872         core dumps.
 873         (sparc64obsd_init_abi): Adjust minimum size of the general purpose
 874         register set used in ELF core dumps.  Add floating-point register set.
 875
 876 2014-02-03  Kevin Buettner  <kevinb@redhat.com>
 877
 878         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
 879         dwarf2_to_gdb[] table using symbolic constants.  Adjust
 880         penultimate entry from number representing the PC register
 881         to symbolic constant representing the MDR register.  Add
 882         constant for the PC register to the end of the table.
 883
 884 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
 885
 886         * bsd-kvm.c: Include <sys/param.h>
 887
 888 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
 889
 890         * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
 891
 892 2014-01-31  Joel Brobecker  <brobecker@adacore.com>
 893
 894         * ada-lang.h (clear_ada_sym_cache): Delete.
 895
 896 2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>
 897
 898         * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
 899
 900 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
 901
 902         * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
 903           the sigreturn register save area only if the syscall is
 904           sigreturn.
 905
 906 2014-01-29  Joel Brobecker  <brobecker@adacore.com>
 907
 908         * valops.c (value_slice): Minor reformatting.
 909
 910 2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>
 911
 912         * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
 913
 914 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
 915
 916         * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
 917         New static globals.
 918         (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
 919         (ada_ignore_descriptive_types_p): New static global.
 920         (find_parallel_type_by_descriptive_type): Return immediately
 921         if ada_ignore_descriptive_types_p is set.
 922         (_initialize_ada_language): Register new commands "maintenance
 923         set ada", "maintenance show ada", "maintenance set ada
 924         ignore-descriptive-types" and "maintenance show ada
 925         ignore-descriptive-types".
 926         * NEWS: Add entry for new "maint ada set/show
 927         ignore-descriptive-types" commands.
 928
 929 2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>
 930
 931         * record-btrace.c (record_btrace_close): Call btrace_teardown
 932         for all threads.
 933
 934 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 935
 936         * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
 937         "ui-out.h".
 938
 939 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 940
 941         * ada-typeprint (type_is_full_subrange_of_target_type):
 942         New function.
 943         (print_range): Add parameter bounds_prefered_p.  If not set,
 944         try printing range types using the name of their base type.
 945         (print_range_type): Add parameter bounds_prefered_p.
 946         Use it in call to print_range.
 947         (print_array_type, ada_print_type): Update calls to print_range
 948         and print_range_type.
 949
 950 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 951
 952         * ada-typeprint.c (print_array_type, print_choices, print_range)
 953         (print_range_bound, print_dynamic_range_bound, print_range_type):
 954         Remove declaration.
 955
 956 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 957
 958         * ada-typeprint.c (print_range): Add missing empty line
 959         after local declaration.
 960
 961 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 962
 963         * ada-valprint.c (print_optional_low_bound): Get index_type's
 964         target type for as long as it is a TYPE_CODE_RANGE.
 965
 966 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 967
 968         * procfs.c (procfs_make_note_section): Remove assertion and
 969         associated comment.
 970
 971 2014-01-24  Yao Qi  <yao@codesourcery.com>
 972
 973         * remote.c (remote_read_bytes): Change type of len to ULONGEST.
 974         * corelow.c (get_core_siginfo): Likewise.
 975
 976 2014-01-24  Yao Qi  <yao@codesourcery.com>
 977
 978         * remote.c (remote_write_bytes_aux): Change type of 'len' to
 979         ULONGEST.  Don't check 'len' is negative.
 980         (remote_write_bytes):  Change type of 'len' to ULONGEST.
 981
 982 2014-01-23  Tom Tromey  <tromey@redhat.com>
 983
 984         PR python/16485:
 985         * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
 986         Handle exception from frame.block.
 987         (FrameVars.fetch_frame_locals): Likewise.
 988
 989 2014-01-23  Tom Tromey  <tromey@redhat.com>
 990
 991         PR python/16487:
 992         * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
 993         on a NULL pointer.  Move "goto error" to correct place.
 994
 995 2014-01-23  Tom Tromey  <tromey@redhat.com>
 996
 997         PR python/16491:
 998         * python/py-framefilter.c (apply_frame_filter): Call
 999         ensure_python_env after computing gdbarch.
1000
1001 2014-01-23  Yao Qi  <yao@codesourcery.com>
1002
1003         * target.c (raw_memory_xfer_partial): Change argument type
1004         from void * to gdb_byte *.
1005         (memory_xfer_partial_1, memory_xfer_partial): Likewise.
1006
1007 2014-01-22  Doug Evans  <dje@google.com>
1008
1009         New gdbserver option --debug-format=timestamp.
1010         * NEWS: Mention it.
1011
1012 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
1013
1014         * syscalls/s390x-linux.xml: New file.
1015         * syscalls/s390-linux.xml: New file.
1016         * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
1017         (XML_SYSCALL_FILENAME_S390X): Likewise.
1018         (op_svc): New enum value for SVC opcode.
1019         (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
1020         (s390_linux_get_syscall_number): New function.
1021         (s390_gdbarch_init): Register '*get_syscall_number' and the
1022         syscall xml file name.
1023         * data-directory/Makefile.in (SYSCALLS_FILES): Add
1024         "s390-linux.xml" and "s390x-linux.xml".
1025         * NEWS: Announce new feature.
1026
1027 2014-01-22  Baruch Siach  <baruch@tkos.co.il>
1028
1029         * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
1030
1031 2014-01-22  Pedro Alves  <palves@redhat.com>
1032
1033         * xtensa-config.c: Include defs.h.
1034
1035 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
1036
1037         * common/common-utils.h: Add "ARI:" comment beside __func__
1038         reference.
1039
1040 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
1041
1042         * common/common-utils.h (FUNCTION_NAME): Expand the macro's
1043         documentation a bit.
1044
1045 2014-01-21  Roland McGrath  <mcgrathr@google.com>
1046
1047         * configure.ac: Call AM_PROG_INSTALL_STRIP.
1048         * configure: Regenerate.
1049         * aclocal.m4: Regenerate.
1050         * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
1051         New substituted variables.
1052         (install-strip): New target.
1053         (INSTALL_SCRIPT): New substituted variable.
1054         (FLAGS_TO_PASS): Add it.
1055         (install-only): Use $(INSTALL_SCRIPT) rather than
1056         $(INSTALL_PROGRAM) for gcore.
1057
1058 2014-01-20  Tom Tromey  <tromey@redhat.com>
1059
1060         * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
1061         together.
1062
1063 2014-01-20  Tom Tromey  <tromey@redhat.com>
1064
1065         * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
1066         (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
1067         (deprecated_cmd_warning, complete_on_cmdlist): Update.
1068         * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
1069         (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
1070         (struct cmd_list_element) <flags>: Remove.
1071         <cmd_deprecated, deprecated_warn_user, malloced_replacement,
1072         doc_allocated>: New fields.
1073         <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
1074         bitfields.
1075         * maint.c (maintenance_do_deprecate): Update.
1076         * top.c (execute_command): Update.
1077
1078 2014-01-20  Baruch Siach  <baruch@tkos.co.il>
1079
1080         * xtensa-linux-nat.c: Include asm/ptrace.h.
1081
1082 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
1083
1084         * Makefile.in (SFILES): Add d-support.c.
1085         (COMMON_OBS): Add d-support.o.
1086         * d-lang.h (d_parse_symbol): Add comment, now defined in
1087         d-support.c.
1088         * d-lang.c (parse_call_convention)
1089         (parse_attributes, parse_function_types)
1090         (parse_function_args, parse_type, parse_identifier)
1091         (call_convention_p, d_parse_symbol): Move functions to ...
1092         * d-support.c: ... New file.
1093
1094 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
1095
1096         * d-lang.h (d_parse_symbol): Add declaration.
1097         * d-lang.c (extract_identifiers)
1098         (extract_type_info): Remove functions.
1099         (parse_call_convention, parse_attributes)
1100         (parse_function_types, parse_function_args)
1101         (parse_type, parse_identifier, call_convention_p)
1102         (d_parse_symbol): New functions.
1103         (d_demangle): Use d_parse_symbol to demangle D symbols.
1104
1105 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
1106
1107         * d-lang.h (struct builtin_d_type): New data type.
1108         (builtin_d_type): Add declaration.
1109         * d-lang.c (d_language_arch_info, build_d_types)
1110         (builtin_d_type): New functions.
1111         (enum d_primitive_types): New data type.
1112         (d_language_defn): Change c_language_arch_info to
1113         d_language_arch_info.
1114         (d_type_data): New static variable.
1115         (_initialize_d_language): Initialize d_type_data.
1116
1117 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
1118
1119         * d-lang.h (d_main_name): Add declaration.
1120         * d-lang.c (d_main_name): New function.
1121         * symtab.c (find_main_name): Add call to d_main_name.
1122
1123 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
1124
1125         * d-lang.c (d_language_defn): Change macro_expansion_c to
1126         macro_expansion_no.
1127
1128 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
1129
1130         * MAINTAINERS: Add myself as a write-after-approval maintainer.
1131
1132 2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>
1133
1134         * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1135         gdb_exception" declaration.
1136         * remote.c (getpkt_or_notif_sane): Likewise.
1137
1138 2014-01-17  Doug Evans  <dje@google.com>
1139
1140         * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1141         function, contents of dirnames_to_char_ptr_vec_append moved here.
1142         (delim_string_to_char_ptr_vec): New function.
1143         (dirnames_to_char_ptr_vec_append): Rewrite.
1144         * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1145
1146 2014-01-17  Doug Evans  <dje@google.com>
1147
1148         * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1149         and moved here ...
1150         * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1151         #include "common-utils.h".
1152         (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1153         * common/vec.h (VEC_ASSERT_PASS): Update.
1154         * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1155         (MACH_CHECK_ERROR): Update.
1156
1157 2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>
1158
1159         * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1160         comments.
1161         * gdbarch.h: Regenerate.
1162
1163 2014-01-16  Tom Tromey  <tromey@redhat.com>
1164
1165         * value.c (struct value) <regnum>: Move earlier.
1166
1167 2014-01-16  Tom Tromey  <tromey@redhat.com>
1168
1169         * remote.c (extended_remote_create_inferior): Rename from
1170         extended_remote_create_inferior_1.  Add "ops" argument.  Remove
1171         old implementation.
1172
1173 2014-01-16  Pedro Alves  <palves@redhat.com>
1174
1175         * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1176         NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1177         the backchain.
1178
1179 2014-01-16  Doug Evans  <dje@google.com>
1180
1181         * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1182
1183 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1184
1185         * btrace.h (btrace_thread_flag): New.
1186         (struct btrace_thread_info) <flags>: New.
1187         * record-btrace.c (record_btrace_resume_thread)
1188         (record_btrace_find_thread_to_move, btrace_step_no_history)
1189         (btrace_step_stopped, record_btrace_start_replaying)
1190         (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1191         (record_btrace_find_resume_thread): New.
1192         (record_btrace_resume, record_btrace_wait): Extend.
1193         (record_btrace_can_execute_reverse): New.
1194         (record_btrace_open): Fail in non-stop mode.
1195         (record_btrace_set_replay): Split into this, ...
1196         (record_btrace_stop_replaying): ... this, ...
1197         (record_btrace_clear_histories): ... and this.
1198         (init_record_btrace_ops): Init to_can_execute_reverse.
1199         * NEWS: Announce it.
1200
1201 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1202
1203         * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1204         (forward_target_decr_pc_after_break)
1205         (target_decr_pc_after_break): New.
1206         * target.c (forward_target_decr_pc_after_break)
1207         (target_decr_pc_after_break): New.
1208         * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1209         instead of gdbarch_decr_pc_after_break.
1210         * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1211         instead of gdbarch_decr_pc_after_break.
1212         * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1213         instead of gdbarch_decr_pc_after_break.
1214         * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1215         instead of gdbarch_decr_pc_after_break.
1216         * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1217         instead of gdbarch_decr_pc_after_break.
1218         * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1219         instead of gdbarch_decr_pc_after_break.
1220
1221 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1222
1223         * btrace.c: Include regcache.h.
1224         (btrace_add_pc): New.
1225         (btrace_enable): Call btrace_add_pc.
1226         (btrace_is_empty): New.
1227         * btrace.h (btrace_is_empty): New.
1228         * record-btrace.c (require_btrace, record_btrace_info): Call
1229         btrace_is_empty.
1230
1231 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1232
1233         * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1234         Support delta reads.
1235         (linux_disable_btrace): Change return type.
1236         * common/linux-btrace.h (linux_read_btrace): Change parameters
1237         and return type to allow error reporting.  Update users.
1238         (linux_disable_btrace): Change return type.  Update users.
1239         * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1240         New.
1241         (btrace_error): New.
1242         (btrace_block) <begin>: Comment on BEGIN == 0.
1243         * btrace.c (btrace_compute_ftrace): Start from the end of
1244         the current trace.
1245         (btrace_stitch_trace, btrace_clear_history): New.
1246         (btrace_fetch): Read delta trace, return if replaying.
1247         (btrace_clear): Move clear history code to btrace_clear_history.
1248         (parse_xml_btrace): Throw an error if parsing failed.
1249         * target.h (struct target_ops) <to_read_btrace>: Change parameters
1250         and return type to allow error reporting.
1251         (target_read_btrace): Change parameters and return type to allow
1252         error reporting.
1253         * target.c (target_read_btrace): Update.
1254         * remote.c (remote_read_btrace): Support delta reads.  Pass
1255         errors on.
1256         * NEWS: Announce it.
1257
1258 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1259
1260         * record.h (record_btrace_frame_unwind)
1261         (record_btrace_tailcall_frame_unwind): New declarations.
1262         * dwarf2-frame: Include record.h
1263         (dwarf2_frame_cfa): Throw an error for btrace frames.
1264         * record-btrace.c: Include hashtab.h.
1265         (btrace_get_bfun_name): New.
1266         (btrace_call_history): Call btrace_get_bfun_name.
1267         (struct btrace_frame_cache): New.
1268         (bfcache): New.
1269         (bfcache_hash, bfcache_eq, bfcache_new): New.
1270         (btrace_get_frame_function): New.
1271         (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1272         (record_btrace_frame_this_id): Compute own id.
1273         (record_btrace_frame_prev_register): Provide PC, throw_error
1274         for all other registers.
1275         (record_btrace_frame_sniffer): Detect btrace frames.
1276         (record_btrace_tailcall_frame_sniffer): New.
1277         (record_btrace_frame_dealloc_cache): New.
1278         (record_btrace_frame_unwind): Add new functions.
1279         (record_btrace_tailcall_frame_unwind): New.
1280         (_initialize_record_btrace): Allocate cache.
1281         * btrace.c (btrace_clear): Call reinit_frame_cache.
1282         * NEWS: Announce it.
1283
1284 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1285
1286         * record-btrace.c (record_btrace_set_replay)
1287         (record_btrace_goto_begin, record_btrace_goto_end)
1288         (record_btrace_goto): New.
1289         (init_record_btrace_ops): Initialize them.
1290         * NEWS: Announce it.
1291
1292 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1293
1294         * record-btrace.c (record_btrace_find_new_threads)
1295         (record_btrace_thread_alive): New.
1296         (init_record_btrace_ops): Initialize to_find_new_threads and
1297         to_thread_alive.
1298
1299 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1300
1301         * record-btrace.c (record_btrace_resume): New.
1302         (record_btrace_wait): New.
1303         (init_record_btrace_ops): Initialize to_wait and to_resume.
1304
1305 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1306
1307         * record-btrace.c (record_btrace_xfer_partial)
1308         (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1309         (record_btrace_allow_memory_access): New.
1310         (init_record_btrace_ops): Initialize new methods.
1311         * target.c (raw_memory_xfer_partial): Bail out if target reports
1312         that this memory is not available.
1313
1314 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1315
1316         * target.h (target_ops) <to_insert_breakpoint>
1317         <to_remove_breakpoint>: Add target_ops parameter.
1318         (forward_target_insert_breakpoint): New.
1319         (forward_target_remove_breakpoint): New.
1320         (memory_remove_breakpoint, memory_insert_breakpoint):
1321         Add target_ops parameter.
1322         * target.c (target_insert_breakpoint): Split into this and ...
1323         (forward_target_insert_breakpoint): ... this.
1324         (target_remove_breakpoint): Split into this and ...
1325         (forward_target_remove_breakpoint): ... this.
1326         (debug_to_insert_breakpoint): Add target_ops parameter.
1327         Call forward_target_insert_breakpoint.
1328         (debug_to_remove_breakpoint): Add target_ops parameter.
1329         Call forward_target_remove_breakpoint.
1330         (update_current_target): Do not inherit or default to_insert_breakpoint
1331         and to_remove_breakpoint.
1332         * corelow.c (ignore): Add target_ops parameter.
1333         * exec.c (ignore): Add target_ops parameter.
1334         * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1335         Add target_ops parameter.
1336         * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1337         Add target_ops parameter.
1338         * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1339         Add target_ops parameter.
1340         * record-full.c (record_full_beneath_to_insert_breakpoint)
1341         (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1342         (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1343         (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1344         (record_full_core_remove_breakpoint): Add target_ops parameter.
1345         Update users.
1346         (record_full_beneath_to_insert_breakpoint_ops)
1347         (record_full_beneath_to_remove_breakpoint_ops)
1348         (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1349         (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1350         tmp_to_remove_breakpoint_ops,
1351         record_full_beneath_to_insert_breakpoint_ops, and
1352         record_full_beneath_to_remove_breakpoint_ops.
1353         * remote-m32r-sdi.c (m32r_insert_breakpoint)
1354         (m32r_remove_breakpoint): Add target_ops parameter.
1355         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1356         Add target_ops parameter.
1357         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1358         Add target_ops parameter.
1359
1360 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1361             Markus Metzger  <markus.t.metzger@intel.com>
1362
1363         * record-btrace.c: Include frame-unwind.h.
1364         (record_btrace_frame_unwind_stop_reason)
1365         (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1366         (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1367         New.
1368         (init_record_btrace_ops): Install it.
1369
1370 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1371
1372         * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1373         get_prev_frame_1.
1374
1375 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1376
1377         * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1378         earlier.
1379
1380 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1381
1382         * frame-unwind.c: Include target.h.
1383         (frame_unwind_try_unwinder): New function with code from ...
1384         (frame_unwind_find_by_frame): ... here.  New variable
1385         unwinder_from_target, call also target_get_unwinder)
1386         (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1387         * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1388         * target.h (struct target_ops): New fields to_get_unwinder and
1389         to_get_tailcall_unwinder.
1390         (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1391
1392 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1393
1394         * record-btrace.c (record_btrace_fetch_registers)
1395         (record_btrace_store_registers)
1396         (record_btrace_to_prepare_to_store): New.
1397         (init_record_btrace_ops): Add the above.
1398
1399 2014-01-16  Tom Tromey  <tromey@redhat.com>
1400
1401         * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1402         * target.h (struct target_ops) <to_prepare_to_store>: Add
1403         argument.
1404         (target_prepare_to_store): Add argument.
1405         * target.c (debug_to_prepare_to_store): Add argument.
1406         (update_current_target): Update.
1407         * remote.c (remote_prepare_to_store): Add 'self' argument.
1408         * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1409         * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1410         * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1411         * record-full.c (record_full_core_prepare_to_store): Add 'self'
1412         argument.
1413         * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1414         * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1415         * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1416         * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1417         * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1418
1419 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1420
1421         * btrace.h (replay) <replay>: New.
1422         (btrace_is_replaying): New.
1423         * btrace.c (btrace_clear): Free replay iterator.
1424         (btrace_is_replaying): New.
1425         * record-btrace.c (record_btrace_is_replaying): New.
1426         (record_btrace_info): Print insn number if replaying.
1427         (record_btrace_insn_history): Start at replay position.
1428         (record_btrace_call_history): Start at replay position.
1429         (init_record_btrace_ops): Init to_record_is_replaying.
1430
1431 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1432
1433         * record-btrace.c (record_btrace_insn_history_range): Include
1434         end.
1435         (record_btrace_insn_history_from): Adjust range.
1436         (record_btrace_call_history_range): Include
1437         end.
1438         (record_btrace_call_history_from): Adjust range.
1439         * NEWS: Announce changes.
1440
1441 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1442
1443         * record.h (enum record_print_flag)
1444         <record_print_indent_calls>: New.
1445         * record.c (get_call_history_modifiers): Recognize /c modifier.
1446         (_initialize_record): Document /c modifier.
1447         * record-btrace.c (btrace_call_history): Add btinfo parameter.
1448         Reorder fields.  Optionally indent the function name.  Update
1449         all users.
1450         * NEWS: Announce changes.
1451
1452 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1453
1454         * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1455
1456 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1457
1458         * btrace.c (ftrace_new_function): Start counting at one.
1459         * record-btrace.c (record_btrace_info): Adjust number of calls
1460         and insns.
1461         * NEWS: Announce it.
1462
1463 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1464
1465         * record-btrace.c (btrace_call_history_insn_range): Print
1466         insn range as [begin, end].
1467
1468 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1469
1470         * btrace.h (struct btrace_func_link): New.
1471         (enum btrace_function_flag): New.
1472         (struct btrace_inst): Rename to ...
1473         (struct btrace_insn): ...this. Update all users.
1474         (struct btrace_func) <ibegin, iend>: Remove.
1475         (struct btrace_func_link): New.
1476         (struct btrace_func): Rename to ...
1477         (struct btrace_function): ...this. Update all users.
1478         (struct btrace_function) <segment, flow, up, insn, insn_offset)
1479         (number, level, flags>: New.
1480         (struct btrace_insn_iterator): Rename to ...
1481         (struct btrace_insn_history): ...this.
1482         Update all users.
1483         (struct btrace_insn_iterator, btrace_call_iterator): New.
1484         (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1485         (struct btrace_target_info) <begin, end, level>
1486         <insn_history, call_history>: New.
1487         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1488         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1489         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1490         (btrace_call_number, btrace_call_begin, btrace_call_end)
1491         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1492         (btrace_find_function_by_number, btrace_set_insn_history)
1493         (btrace_set_call_history): New.
1494         * btrace.c (btrace_init_insn_iterator)
1495         (btrace_init_func_iterator, compute_itrace): Remove.
1496         (ftrace_print_function_name, ftrace_print_filename)
1497         (ftrace_skip_file): Change
1498         parameter to const.
1499         (ftrace_init_func): Remove.
1500         (ftrace_debug): Use new btrace_function fields.
1501         (ftrace_function_switched): Also consider gaining and
1502         losing symbol information).
1503         (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1504         (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1505         (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1506         New.
1507         (ftrace_new_function): Move. Remove debug print.
1508         (ftrace_update_lines, ftrace_update_insns): New.
1509         (ftrace_update_function): Check for call, ret, and jump.
1510         (compute_ftrace): Renamed to ...
1511         (btrace_compute_ftrace): ...this. Rewritten to compute call
1512         stack.
1513         (btrace_fetch, btrace_clear): Updated.
1514         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1515         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1516         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1517         (btrace_call_number, btrace_call_begin, btrace_call_end)
1518         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1519         (btrace_find_function_by_number, btrace_set_insn_history)
1520         (btrace_set_call_history): New.
1521         * record-btrace.c (require_btrace): Use new btrace thread
1522         info fields.
1523         (record_btrace_info, btrace_insn_history)
1524         (record_btrace_insn_history, record_btrace_insn_history_range):
1525         Use new btrace thread info fields and new iterator.
1526         (btrace_func_history_src_line): Rename to ...
1527         (btrace_call_history_src_line): ...this. Use new btrace
1528         thread info fields.
1529         (btrace_func_history): Rename to ...
1530         (btrace_call_history): ...this. Use new btrace thread info
1531         fields and new iterator.
1532         (record_btrace_call_history, record_btrace_call_history_range):
1533         Use new btrace thread info fields and new iterator.
1534
1535 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1536
1537         * frame.h (frame_id_build_unavailable_stack_special): New.
1538         * frame.c (frame_id_build_unavailable_stack_special): New.
1539
1540 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1541
1542         * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1543         (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1544         (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1545         to gdbarch.
1546         * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1547         (i386_insn_is_jump, i386_jmp_p): New.
1548         (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1549         insn_is_jump to gdbarch.
1550         * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1551         * gdbarch.h: Regenerated.
1552         * gdbarch.c: Regenerated.
1553         * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1554         (default_insn_is_jump): New.
1555         * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1556         (default_insn_is_jump): New.
1557
1558 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1559
1560         * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1561         Change to ...
1562         (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
1563         (btrace_read_type) <btrace_read_new>: Change to ...
1564         (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.
1565
1566 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
1567
1568         * common/linux-btrace.c (linux_read_btrace): Free trace from
1569         previous iteration.
1570
1571 2014-01-15  Doug Evans  <dje@google.com>
1572
1573         * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1574         uint32_t.
1575
1576 2014-01-15  Tom Tromey  <tromey@redhat.com>
1577
1578         * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1579         * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1580         * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1581         (set_objfile_main_name): New function.
1582         * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1583         language_of_main>: New fields.
1584         (set_objfile_main_name): Declare.
1585         * symtab.c (find_main_name): Loop over objfiles to find the main
1586         name and language.
1587         (set_main_name): Now static.
1588         (get_main_info): Add comment.
1589         * symtab.h (set_main_name): Don't declare.
1590
1591 2014-01-15  Tom Tromey  <tromey@redhat.com>
1592
1593         * symtab.c (main_progspace_key): New global.
1594         (struct main_info): New.
1595         (name_of_main, language_of_main): Remove.
1596         (get_main_info, main_info_cleanup): New function.
1597         (set_main_name, main_name, main_language): Use get_main_info.
1598         (_initialize_symtab): Initialize main_progspace_key.
1599
1600 2014-01-15  Tom Tromey  <tromey@redhat.com>
1601
1602         * dbxread.c (process_one_symbol): Update.
1603         * dwarf2read.c (read_partial_die): Update.
1604         * symfile.c (set_initial_language): Call main_language.
1605         * symtab.c (language_of_main): Now static.
1606         (set_main_name): Add 'lang' parameter.
1607         (find_main_name): Update.
1608         (main_language): New function.
1609         (symtab_observer_executable_changed): Update.
1610         * symtab.h (set_main_name): Update.
1611         (language_of_main): Remove.
1612         (main_language): Declare.
1613
1614 2014-01-15  Tom Tromey  <tromey@redhat.com>
1615
1616         * symfile.c (init_entry_point_info): Use new "initialized" field.
1617         Update.
1618         * objfiles.h (struct entry_point) <initialized>: New field.
1619         (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1620         (struct objfile) <ei>: ...here.  Remove.
1621         * objfiles.c (entry_point_address_query): Update.
1622
1623 2014-01-15  Tom Tromey  <tromey@redhat.com>
1624
1625         * objfiles.c (entry_point_address_query): Relocate entry point
1626         address.
1627         (objfile_relocate1): Do not relocate entry point address.
1628         * objfiles.h (struct entry_info) <entry_point>: Update comment.
1629         <the_bfd_section_index>: New field.
1630         * symfile.c (init_entry_point_info): Find the entry point's
1631         section.
1632
1633 2014-01-15  Tom Tromey  <tromey@redhat.com>
1634
1635         * solib-frv.c (enable_break): Use entry_point_address_query.
1636
1637 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
1638
1639         * NEWS: Add note on improved process record-replay on
1640         arm*-linux* targets.
1641
1642 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
1643
1644         * arm-tdep.c (enum arm_record_result): New enum.
1645         (arm_record_unsupported_insn): New function.
1646         (arm_record_coproc_data_proc): Removed.
1647         (thumb2_record_ld_st_multiple): New function.
1648         (thumb2_record_ld_st_dual_ex_tbb): New function.
1649         (thumb2_record_data_proc_sreg_mimm): New function.
1650         (thumb2_record_ps_dest_generic): New function.
1651         (thumb2_record_branch_misc_cntrl): New function.
1652         (thumb2_record_str_single_data): New function.
1653         (thumb2_record_ld_mem_hints): New function.
1654         (thumb2_record_ld_word): New function.
1655         (thumb2_record_lmul_lmla_div): New function.
1656         (thumb2_record_decode_insn_handler): New function.
1657         (decode_insn): Add thumb32 instruction handlers.
1658
1659 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
1660
1661         * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1662         (struct arm_linux_record_tdep): Declare.
1663         (arm_canonicalize_syscall): New function.
1664         (arm_all_but_pc_registers_record): New function.
1665         (arm_linux_syscall_record): New function.
1666         (arm_linux_init_abi): Add syscall recording constructs.
1667         * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1668         decoding.  (arm_record_coproc_data_proc): Update arm syscall
1669         decoding.
1670         * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1671         <arm_syscall_record>: New field.
1672         * configure.tgt (arm*-*-linux*): Add linux-record.o to
1673         gdb_target_obs.
1674
1675 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
1676
1677         * arm-tdep.c (thumb_record_misc): Update to use sp as base
1678         register for push instruction recording.
1679
1680 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
1681
1682         * arm-tdep.c (thumb_record_misc): Update to correct logical
1683         error while recording ldm, ldmia and pop instructions.
1684
1685 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
1686
1687         * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1688
1689 2014-01-15  Pedro Alves  <palves@redhat.com>
1690
1691         * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1692         (go32_resume, go32_fetch_registers, store_register)
1693         (go32_store_registers, go32_prepare_to_store)
1694         (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1695         (go32_create_inferior, go32_can_run, go32_terminal_init)
1696         (go32_terminal_inferior, go32_terminal_ours): Delete forward
1697         declarations.
1698
1699 2014-01-15  Tom Tromey  <tromey@redhat.com>
1700
1701         * target.h (async_callback_ftype): New typedef.
1702         (struct target_ops) <to_async>: Use it.
1703
1704 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
1705
1706         * python/py-value.c (get_field_type): Remove unnecessary curly
1707         braces for single-statement if block.
1708
1709 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
1710
1711         * python/py-type.c (convert_field): Add missing empty line
1712         after declarations.
1713
1714 2014-01-14  Doug Evans  <dje@google.com>
1715
1716         * symfile.h (expand_symtabs_matching): Renamed from
1717         expand_partial_symbol_names.  Update prototype.
1718         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1719         * symfile.c (expand_symtabs_matching): Renamed from
1720         expand_partial_symbol_names.  New args file_matcher, kind.
1721         Rename arg fun to symbol_matcher.
1722         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1723         * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1724         ada_expand_partial_symbol_name.
1725         (ada_make_symbol_completion_list): Update to call
1726         expand_symtabs_matching.
1727         (ada_add_global_exceptions): Call expand_symtabs_matching.
1728         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1729         call map_symbol_filenames.
1730         * symtab.c (sources_info): Update to call map_symbol_filenames.
1731         (search_symbols): Call expand_symtabs_matching.
1732         (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1733         (default_make_symbol_completion_list_break_on): Update to call
1734         expand_symtabs_matching.
1735         (make_source_files_completion_list): Update to call
1736         map_symbol_filenames.
1737
1738 2014-01-14  Doug Evans  <dje@google.com>
1739
1740         * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1741         (expand_symtabs_symbol_matcher_ftype): New typedef.
1742         (quick_symbol_functions.expand_symtabs_matching): Update to use.
1743         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1744         * symfile.c (expand_partial_symbol_names): Update to use
1745         expand_symtabs_symbol_matcher_ftype.
1746         * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1747         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1748         Arg name_matcher renamed to symbol_matcher.
1749         * psymtab.c (recursively_search_psymtabs): Update to use
1750         expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
1751         sym_matcher.
1752         (expand_symtabs_matching_via_partial): Update to use
1753         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1754         Arg name_matcher renamed to symbol_matcher.
1755
1756 2014-01-14  Doug Evans  <dje@google.com>
1757
1758         * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1759         (map_partial_symbol_filenames): Ditto.
1760         * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1761         (map_partial_symbol_filenames): Ditto.
1762         * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1763         (map_partial_symbol_filenames): Ditto.
1764         * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1765         (map_partial_symbol_filenames): Ditto.
1766         * symtab.c: Delete #include "psymtab.h".
1767
1768 2014-01-14  Pedro Alves  <palves@redhat.com>
1769             Tom Tromey  <tromey@redhat.com>
1770
1771         * infrun.c (use_displaced_stepping): Use find_record_target
1772         instead of RECORD_IS_USED.
1773         (adjust_pc_after_break): Use record_full_is_used instead of
1774         RECORD_IS_USED.
1775         * record-btrace.c (record_btrace_open): Call record_preopen
1776         instead of checking RECORD_IS_USED.
1777         * record-full.c (record_full_shortname)
1778         (record_full_core_shortname): New globals.
1779         (record_full_is_used): New function.
1780         (find_full_open): Call record_preopen instead of checking
1781         RECORD_IS_USED.
1782         (init_record_full_ops): Set the target's shortname to
1783         record_full_shortname.
1784         (init_record_full_core_ops): Set the target's shortname to
1785         record_full_core_shortname.
1786         * record-full.h (record_full_is_used): Declare.
1787         * record.c (find_record_target): Make extern.
1788         (record_preopen): New function.
1789         * record.h (RECORD_IS_USED): Delete macro.
1790         (find_record_target, record_preopen): Declare functions.
1791
1792 2014-01-14  Yao Qi  <yao@codesourcery.com>
1793
1794         * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1795         'len''s type to ULONGEST.
1796         (core_xfer_shared_libraries_aix): Likewise.
1797         * gdbarch.c, gdbarch.h: Regenerated.
1798         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1799         Change type of 'len' to ULONGEST.
1800         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1801         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1802
1803 2014-01-14  Yao Qi  <yao@codesourcery.com>
1804
1805         * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1806         type of 'len' to ULONGEST.
1807         (linux_xfer_osdata_processgroups): Likewise.
1808         (linux_xfer_osdata_threads): Likewise.
1809         (linux_xfer_osdata_fds): Likewise.
1810         (linux_xfer_osdata_isockets): Likewise.
1811         (linux_xfer_osdata_shm): Likewise.
1812         (linux_xfer_osdata_sem): Likewise.
1813         (linux_xfer_osdata_msg): Likewise.
1814         (linux_common_xfer_osdata): Likewise.
1815         (struct osdata_type) <getter>: Likewise.
1816         * common/linux-osdata.h (linux_common_xfer_osdata): Update
1817         the declaration.
1818
1819 2014-01-14  Yao Qi  <yao@codesourcery.com>
1820
1821         * target.h (target_xfer_partial_ftype): Update.
1822         (struct target_ops) <to_xfer_partial>: Change 'len' type to
1823         ULONGEST.
1824         * aix-thread.c (aix_thread_xfer_partial): Change type of
1825         argument 'len' to ULONGEST.
1826         * auxv.c (procfs_xfer_auxv): Likewise.
1827         (ld_so_xfer_auxv): Likewise.
1828         (memory_xfer_auxv): Likewise.
1829         * bfd-target.c (target_bfd_xfer_partial): Likewise.
1830         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1831         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1832         * corelow.c (core_xfer_partial): Likewise.
1833         * ctf.c (ctf_xfer_partial): Likewise.
1834         * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
1835         '%u'.
1836         (darwin_read_dyld_info): Likewise.
1837         (darwin_xfer_partial): Likewise.
1838         * exec.c (section_table_xfer_memory_partial): Likewise.
1839         (exec_xfer_partial): Likewise.
1840         * exec.h (section_table_xfer_memory_partial): Update
1841         declaration.
1842         * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
1843         instead of plongest.
1844         (gnu_xfer_partial): Likewise.
1845         * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1846         (ia64_hpux_xfer_solib_got): Likewise.
1847         (ia64_hpux_xfer_partial): Likewise.
1848         * ia64-linux-nat.c (ia64_linux_xfer_partial):
1849         * inf-ptrace.c (inf_ptrace_xfer_partial):
1850         * inf-ttrace.c (inf_ttrace_xfer_partial):
1851         * linux-nat.c (linux_xfer_siginfo): Likewise.
1852         (linux_nat_xfer_partial): Likewise.
1853         (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1854         (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1855         * monitor.c (monitor_xfer_memory): Likewise.
1856         (monitor_xfer_partial): Likewise.
1857         * procfs.c (procfs_xfer_partial): Likewise.
1858         * record-full.c (record_full_xfer_partial): Likewise.
1859         (record_full_core_xfer_partial): Likewise.
1860         * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
1861         instead of plongest.
1862         (gdbsim_xfer_partial): Likewise.
1863         * remote.c (remote_xfer_partial): Likewise.
1864         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1865         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1866         declaration.
1867         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1868         (rs6000_xfer_shared_libraries): Likewise.
1869         * sol-thread.c (sol_thread_xfer_partial): Likewise.
1870         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1871         (sparc_xfer_partial): Likewise.
1872         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1873         (spu_xfer_partial): Likewise.
1874         * spu-multiarch.c (spu_xfer_partial): Likewise.
1875         * target.c (target_read_live_memory): Likewise.
1876         (memory_xfer_live_readonly_partial): Likewise.
1877         (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1878         (target_xfer_partial, default_xfer_partial): Likewise.
1879         (current_xfer_partial): Likewise.
1880         * tracepoint.c (tfile_xfer_partial): Likewise.
1881         * windows-nat.c (windows_xfer_memory): Likewise.  Call
1882         pulongest instead of plongest.
1883         (windows_xfer_partial): Likewise.
1884         (windows_xfer_shared_libraries): Likewise.
1885
1886 2014-01-14  Yao Qi  <yao@codesourcery.com>
1887
1888         * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1889         target_xfer_partial_ftype.
1890
1891 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
1892
1893         PR python/15464
1894         PR python/16113
1895         * valops.c (value_struct_elt_bitpos): New function
1896         * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1897         object to 'None' if the field name is an empty string ("").
1898         * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1899         attribute to look for a field when 'name' is 'None'.
1900         (get_field_type): New function
1901
1902 2014-01-13  Doug Evans  <dje@google.com>
1903
1904         PR symtab/16426
1905         * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1906         (try_open_dwop_file): Ditto.
1907         * gdb_bfd.c: #include "vec.h".
1908         (bfdp): New typedef.
1909         (struct gdb_bfd_data): New member included_bfds.
1910         (gdb_bfd_unref): Unref all included bfds.
1911         (gdb_bfd_record_inclusion): New function.
1912         * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1913
1914 2014-01-13  Tom Tromey  <tromey@redhat.com>
1915
1916         * gdbcore.h (deprecated_core_resize_section_table): Remove.
1917
1918 2014-01-13  Tom Tromey  <tromey@redhat.com>
1919
1920         * defs.h (use_windows): Remove.
1921         * gdb.c (main): Update.
1922         * main.c (captured_main, gdb_main): Update.
1923         * main.h (struct captured_main_args) <use_windows>: Remove.
1924         * top.c (use_windows): Remove.
1925
1926 2014-01-13  Tom Tromey  <tromey@redhat.com>
1927
1928         * defs.h (deprecated_flush_hook): Remove.
1929
1930 2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1931
1932         PR threads/16216
1933         * linux-thread-db.c (try_thread_db_load): Add parameter
1934         check_auto_load_safe.  Move here the file_is_auto_load_safe call.
1935         (try_thread_db_load_from_pdir_1): Move it there from here.
1936         (try_thread_db_load_from_sdir): Update caller.
1937         (try_thread_db_load_from_dir): Move it there from here.
1938
1939 2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>
1940
1941         * regformats/regdat.sh: Always rewrite the register file.
1942
1943 2014-01-13  Pedro Alves  <palves@redhat.com>
1944
1945         * Makefile.in (CHECK_HEADERS): New variable.
1946         (check-headers:): New rule.
1947
1948 2014-01-13  Tom Tromey  <tromey@redhat.com>
1949
1950         * cli/cli-setshow.c (do_set_command): Update.
1951         * defs.h (deprecated_set_hook): Remove.
1952         * top.c (deprecated_set_hook): Remove.
1953
1954 2014-01-13  Pedro Alves  <palves@redhat.com>
1955
1956         * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1957         the tracepoint if the PC is a pseudo-register.
1958
1959 2014-01-13  Tom Tromey  <tromey@redhat.com>
1960
1961         * defs.h (XCALLOC): Remove.
1962         * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1963         (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1964         * dwarf2loc.c (allocate_piece_closure): Likewise.
1965         * elfread.c (elf_symfile_segments): Likewise.
1966         (elf_symfile_segments): Likewise.
1967         * gdbtypes.c (copy_type_recursive): Likewise.
1968         * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1969         * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1970         * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1971         XCALLOC.
1972         * mt-tdep.c (mt_gdbarch_init): Likewise.
1973         * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1974         XCALLOC.
1975         * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1976         * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1977         * registry.c (registry_alloc_data): Likewise.
1978         * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1979         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1980         * serial.c (serial_fdopen_ops): Likewise.
1981         * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1982         XCALLOC.
1983         * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1984         * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1985         not XCALLOC.
1986
1987 2014-01-13  Tom Tromey  <tromey@redhat.com>
1988
1989         * defs.h (XMALLOC): Remove.
1990         * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1991         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1992         * cli-out.c (struct ui_out *): Likewise.
1993         * cli/cli-dump.c (add_dump_command): Likewise.
1994         (add_dump_command): Likewise.
1995         * complaints.c (get_complaints): Likewise.
1996         (find_complaint): Likewise.
1997         * dwarf2-frame.c (execute_cfa_program): Likewise.
1998         * dwarf2read.c (abbrev_table_read_table): Likewise.
1999         * gdbarch.sh: Likewise.
2000         * gdbarch.c: Rebuild.
2001         * inf-ttrace.c (inf_ttrace_add_page): Likewise.
2002         * interps.c (interp_new): Likewise.
2003         * lm32-tdep.c (lm32_gdbarch_init): Likewise.
2004         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2005         * mi/mi-console.c (mi_console_file_new): Likewise.
2006         * mi/mi-interp.c (mi_interpreter_init): Likewise.
2007         * mi/mi-out.c (mi_out_new): Likewise.
2008         * mi/mi-parse.c (mi_parse): Likewise.
2009         * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
2010         * moxie-tdep.c (moxie_gdbarch_init): Likewise.
2011         * observer.c (xalloc_observer_list_node): Likewise.
2012         * regcache.c (regcache_xmalloc_1): Likewise.
2013         * reggroups.c (reggroup_new): Likewise.
2014         (_initialize_reggroup): Likewise.
2015         * registry.c (register_data_with_cleanup): Likewise.
2016         * remote.c (remote_notif_stop_alloc_reply): Likewise.
2017         * ser-base.c (serial_ttystate): Likewise.
2018         * ser-mingw.c (make_pipe_state): Likewise.
2019         * ser-pipe.c (pipe_open): Likewise.
2020         * serial.c (serial_open): Likewise.
2021         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2022         * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
2023         (tui_alloc_win_info): Likewise.
2024         (tui_add_content_elements): Likewise.
2025         * tui/tui-file.c (tui_file_new): Likewise.
2026         * tui/tui-out.c (tui_out_new): Likewise.
2027         * ui-file.c (mem_file_new): Likewise.
2028         * ui-out.c (push_level): Likewise.
2029         (make_cleanup_ui_out_end): Likewise.
2030         (append_header_to_list): Likewise.
2031         (ui_out_new): Likewise.
2032         * user-regs.c (user_reg_add_builtin): Likewise.
2033
2034 2014-01-13  Tom Tromey  <tromey@redhat.com>
2035
2036         * defs.h (XZALLOC): Remove.
2037         * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
2038         * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
2039         (get_ada_tasks_inferior_data): Likewise.
2040         * auto-load.c (get_auto_load_pspace_data): Likewise.
2041         * auxv.c (get_auxv_inferior_data): Likewise.
2042         * bfd-target.c (target_bfd_reopen): Likewise.
2043         * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
2044         (deprecated_insert_raw_breakpoint): Likewise.
2045         * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
2046         * corelow.c (core_open): Likewise.
2047         * darwin-nat.c (darwin_check_new_threads): Likewise.
2048         (darwin_attach_pid): Likewise.
2049         * dummy-frame.c (dummy_frame_push): Likewise.
2050         * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
2051         * dwarf2loc.c (allocate_piece_closure): Likewise.
2052         * elfread.c (elf_symfile_segments): Likewise.
2053         * eval.c (ptrmath_type_p): Likewise.
2054         * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
2055         * gdbtypes.c (alloc_type_arch): Likewise.
2056         (alloc_type_instance): Likewise.
2057         * hppa-tdep.c (hppa_gdbarch_init): Likewise.
2058         * inf-child.c (inf_child_can_use_agent): Likewise.
2059         * inflow.c (get_inflow_inferior_data): Likewise.
2060         * infrun.c (save_infcall_suspend_state): Likewise.
2061         * jit.c (jit_reader_load): Likewise.
2062         (get_jit_objfile_data): Likewise.
2063         (get_jit_program_space_data): Likewise.
2064         (jit_object_open_impl): Likewise.
2065         (jit_symtab_open_impl): Likewise.
2066         (jit_block_open_impl): Likewise.
2067         (jit_frame_sniffer): Likewise.
2068         * linux-fork.c (add_fork): Likewise.
2069         * maint.c (make_command_stats_cleanup): Likewise.
2070         * objfiles.c (get_objfile_pspace_data): Likewise.
2071         * opencl-lang.c (struct lval_closure): Likewise.
2072         * osdata.c (osdata_start_osdata): Likewise.
2073         * progspace.c (new_address_space): Likewise.
2074         (add_program_space): Likewise.
2075         * remote-sim.c (get_sim_inferior_data): Likewise.
2076         * sh-tdep.c (sh_gdbarch_init): Likewise.
2077         * skip.c (Ignore): Likewise.
2078         (skip_delete_command): Likewise.
2079         * solib-aix.c (get_solib_aix_inferior_data): Likewise.
2080         (library_list_start_library): Likewise.
2081         (solib_aix_current_sos): Likewise.
2082         * solib-darwin.c (get_darwin_info): Likewise.
2083         (darwin_current_sos): Likewise.
2084         * solib-dsbt.c (get_dsbt_info): Likewise.
2085         * solib-ia64-hpux.c (new_so_list): Likewise.
2086         (ia64_hpux_get_solib_linkage_addr): Likewise.
2087         * solib-spu.c (append_ocl_sos): Likewise.
2088         (spu_current_sos): Likewise.
2089         * solib-svr4.c (get_svr4_info): Likewise.
2090         (svr4_keep_data_in_core): Likewise.
2091         (library_list_start_library): Likewise.
2092         (svr4_default_sos): Likewise.
2093         (svr4_read_so_list): Likewise.
2094         * solib-target.c (library_list_start_library): Likewise.
2095         (solib_target_current_sos): Likewise.
2096         * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
2097         * symfile-debug.c (install_symfile_debug_logging): Likewise.
2098         * symfile.c (default_symfile_segments): Likewise.
2099         * target-descriptions.c (tdesc_data_init): Likewise.
2100         (tdesc_create_reg): Likewise.
2101         (struct tdesc_type *): Likewise.
2102         (tdesc_create_vector): Likewise.
2103         (tdesc_set_struct_size): Likewise.
2104         (struct tdesc_type *): Likewise.
2105         (tdesc_free_feature): Likewise.
2106         (tdesc_create_feature): Likewise.
2107         * windows-nat.c (windows_add_thread): Likewise.
2108         (windows_make_so): Likewise.
2109         * xml-support.c (gdb_xml_body_text): Likewise.
2110         (gdb_xml_create_parser_and_cleanup): Likewise.
2111         (xml_process_xincludes): Likewise.
2112         * xml-syscall.c (allocate_syscalls_info): Likewise.
2113         (syscall_create_syscall_desc): Likewise.
2114
2115 2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>
2116
2117         * i386-tdep.c (i386_stap_parse_special_token_triplet): New
2118         function, with code from i386_stap_parse_special_token.
2119         (i386_stap_parse_special_token_three_arg_disp): Likewise.
2120         (i386_stap_parse_special_token): Move code to the two functions
2121         above; simplify it.
2122
2123 2014-01-09  Pedro Alves  <palves@redhat.com>
2124             Hui Zhu  <hui@codesourcery.com>
2125
2126         PR gdb/16101
2127         * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2128         bp_err_string.  Don't mark the location shlib_disabled if the
2129         error thrown wasn't a generic or memory error.  Catch errors
2130         thrown while inserting breakpoints in overlayed code.  Output
2131         error message of software breakpoints.
2132         * remote.c (remote_insert_breakpoint): If this breakpoint has
2133         target-side commands but this stub doesn't support Z0 packets,
2134         throw NOT_SUPPORTED_ERROR error.
2135         * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2136         * target.h (target_insert_breakpoint): Extend comment.
2137         (target_insert_hw_breakpoint): Add comment.
2138
2139 2014-01-08  Pedro Alves  <palves@redhat.com>
2140
2141         * remote.c (remote_add_thread): Add threads silently if starting
2142         up.
2143         (remote_notice_new_inferior): If in all-stop, and starting up,
2144         don't call notice_new_inferior.
2145         (get_current_thread): New function, factored out from ...
2146         (add_current_inferior_and_thread): ... this.  Adjust.
2147         (remote_start_remote) <all-stop>: Fetch the thread list.  If we
2148         found any thread, then select the remote's current thread as GDB's
2149         current thread too.
2150
2151 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
2152
2153         * NEWS: Create a new section for the next release branch.
2154         Rename the section of the current branch, now that it has
2155         been cut.
2156
2157 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
2158
2159         GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2160         * version.in: Bump version to 7.7.50.DATE-cvs.
2161
2162 2014-01-08  Yao Qi  <yao@codesourcery.com>
2163
2164         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2165         type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
2166         (spu_xfer_partial): Cast 'buf' to 'const char *'.
2167
2168 2014-01-08  Yao Qi  <yao@codesourcery.com>
2169
2170         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2171         return value of bfd_get_filename to symbol_file_add_from_bfd.
2172
2173 2014-01-08  Pierre Muller  <muller@sourceware.org>
2174
2175         Fix PR16201.
2176         * coff-pe-read.c (struct read_pe_section_data): Add index field.
2177         (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2178         to prim_record_mininal_symbol_and_info.
2179         (add_pe_forwarded_sym): Use known section number of forwarded symbol
2180         in call to prim_record_minimal_symbol_and_info.
2181         (read_pe_exported_syms): Set index field of section_data.
2182
2183 2014-01-07  Andrew Pinski  <apinski@cavium.com>
2184
2185         * features/aarch64-core.xml (cpsr): Change to be 64bit.
2186         * features/aarch64.c: Regenerate.
2187
2188 2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>
2189
2190         * target.c (return_null): Define.
2191         (update_current_target): Use it instead of return_zero for
2192         functions that return a pointer.
2193
2194 2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
2195
2196         * source.c (add_path): Fix check for duplicated paths in the previously
2197         included paths.
2198
2199 2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>
2200
2201         * ada-lang.c: Remove duplicated include statements.
2202         * alphabsd-nat.c: Ditto.
2203         * amd64-darwin-tdep.c: Ditto.
2204         * amd64fbsd-nat.c: Ditto.
2205         * auto-load.c: Ditto.
2206         * ax-gdb.c: Ditto.
2207         * breakpoint.c: Ditto.
2208         * dbxread.c: Ditto.
2209         * fork-child.c: Ditto.
2210         * gdb_usleep.c: Ditto.
2211         * i386-darwin-tdep.c: Ditto.
2212         * i386fbsd-nat.c: Ditto.
2213         * infcmd.c: Ditto.
2214         * inferior.c: Ditto.
2215         * jv-lang.c: Ditto.
2216         * linux-nat.c: Ditto.
2217         * linux-tdep.c: Ditto.
2218         * m68kbsd-nat.c: Ditto.
2219         * m68klinux-nat.c: Ditto.
2220         * microblaze-tdep.c: Ditto.
2221         * mips-linux-tdep.c: Ditto.
2222         * mn10300-tdep.c: Ditto.
2223         * nto-tdep.c: Ditto.
2224         * opencl-lang.c: Ditto.
2225         * osdata.c: Ditto.
2226         * printcmd.c: Ditto.
2227         * regcache.c: Ditto.
2228         * remote-m32r-sdi.c: Ditto.
2229         * remote.c: Ditto.
2230         * symfile.c: Ditto.
2231         * symtab.c: Ditto.
2232         * tilegx-linux-nat.c: Ditto.
2233         * tilegx-tdep.c: Ditto.
2234         * tracepoint.c: Ditto.
2235         * valops.c: Ditto.
2236         * vaxbsd-nat.c: Ditto.
2237         * windows-nat.c: Ditto.
2238         * xtensa-tdep.c: Ditto.
2239
2240 2014-01-07  Yao Qi  <yao@codesourcery.com>
2241
2242         * spu-linux-nat.c (_initialize_spu_nat): Declare.
2243
2244 2014-01-07  Yao Qi  <yao@codesourcery.com>
2245             Joel Brobecker  <brobecker@adacore.com>
2246
2247         * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2248         (pdc_write_regs): Likewise.
2249         (fetch_regs_kernel_thread): Likewise.
2250         (store_regs_kernel_thread): Likewise.
2251
2252 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2253
2254         * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2255         tagged type objects to their actual type.
2256
2257 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2258
2259         * ada-valprint.c (print_field_values): Add "language" parameter.
2260         Update calls to print_field_values and print_variant_part.
2261         Pass new parameter "language" in call to val_print instead
2262         of "current_language".  Replace call to ada_val_print by call
2263         to val_print.
2264         (print_variant_part): Add "language" parameter.
2265         (ada_val_print_struct_union): Update call to print_field_values.
2266
2267 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2268
2269         * ada-valprint.c (ui_memcpy): Delete.
2270         (ada_print_floating): Update documentation.  Add empty line
2271         between between function documentation and implementation.
2272         Delete variable "buffer".  Use ui_file_xstrdup in place of
2273         ui_file_put.  Minor adjustments following this change.
2274
2275 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2276
2277         * ada-valprint.c (ada_val_print_string): New function,
2278         extracted from ada_val_print_array.
2279         (ada_val_print_array): Replace extracted code by call
2280         to ada_val_print_string followed by a return.  Move
2281         "else" branch to the function's top block.
2282
2283 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2284
2285         * ada-valprint.c (ada_val_print_array): Move implementation
2286         down.  Rename parameter "offset" and "val" into "offset_aligned"
2287         and "original_value" respectively.  Add parameter "offset".
2288
2289 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2290
2291         * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2292         re-organizing the code. Change the "???" message printed
2293         when target type is a TYPE_CODE_UNDEF into
2294         "<ref to undefined type>".
2295
2296 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2297
2298         * ada-valprint.c (print_record): Delete, implementation inlined...
2299         (ada_val_print_struct_union): ... here.  Remove call to
2300         ada_check_typedef in inlined implementation.
2301
2302 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2303
2304         * ada-valprint.c (ada_val_print_gnat_array): New function,
2305         extracted from ada_val_print_1;
2306         (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2307         (ada_val_print_flt, ada_val_print_struct_union)
2308         (ada_val_print_ref): Likewise.
2309         (ada_val_print_1): Delete variables i and elttype.
2310         Replace extracted-out code by call to corresponding
2311         new functions.
2312
2313 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2314
2315         * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2316
2317 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2318
2319         * ada-valprint.c (ada_val_print_1): Replace calls to
2320         ada_val_print_1 by calls to val_print.
2321
2322 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2323
2324         * ada-valprint.c (ada_val_print_1): Add parameter "language".
2325         Update calls to self accordingly.  Replace calls to c_val_print
2326         by calls to val_print.
2327
2328 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2329
2330         * ada-valprint.c (print_record): Delete declaration.
2331         (adjust_type_signedness, ada_val_print_1): Likewise.
2332         (ada_val_print): Move function implementation down.
2333         (print_variant_part, print_field_values, print_record):
2334         Move function implementation up.
2335
2336 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2337
2338         * python/py-type.c (typy_get_name): New function.
2339         (type_object_getset): Add entry for attribute "name".
2340         * NEWS: Add entry mentioning this new attribute.
2341
2342 2014-01-07  Yao Qi  <yao@codesourcery.com>
2343
2344         * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2345         statement.
2346
2347 2014-01-07  Yao Qi  <yao@codesourcery.com>
2348
2349         * gnu-nat.c (info_port_rights): Add qualifier const to
2350         argument args.
2351
2352 2014-01-07  Yao Qi  <yao@codesourcery.com>
2353
2354         * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2355
2356 2014-01-07  Yao Qi  <yao@codesourcery.com>
2357
2358         * gnu-nat.c (make_inf) Update declaration.
2359         (make_inf): Make it static.
2360         (inf_set_traced): Likewise.
2361         (inf_port_to_thread, inf_task_died_status): Likewise.
2362
2363 2014-01-07  Yao Qi  <yao@codesourcery.com>
2364
2365         * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2366
2367 2014-01-07  Yao Qi  <yao@codesourcery.com>
2368
2369         * gnu-nat.c (_initialize_gnu_nat): Declare.
2370
2371 2014-01-07  Yao Qi  <yao@codesourcery.com>
2372
2373         * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2374         'enum bfd_endian'.
2375         (struct gdbarch_info) <byte_order>: Change type to
2376         'enum bfd_endian'.
2377         <byte_order_for_code>: Likewise.
2378         * gdbarch.c, gdbarch.h: Regenerated.
2379
2380 2014-01-06  Sasha Smundak  <asmundak@google.com>
2381
2382         * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2383
2384 2014-01-06  Tom Tromey  <tromey@redhat.com>
2385
2386         * doublest.c (convert_doublest_to_floatformat): Use const, not
2387         CONST.
2388         * somread.c (som_symtab_read): Likewise.
2389
2390 2014-01-07  Hui Zhu  <hui@codesourcery.com>
2391
2392         * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2393         (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2394         (gdb_bfd_fopen): Ditto.
2395         (gdb_bfd_openr): Ditto.
2396         (gdb_bfd_openw): Ditto.
2397         (gdb_bfd_openr_iovec): Ditto.
2398         (gdb_bfd_fdopenr): Ditto.
2399         * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2400         * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2401         with xstrdup.
2402         * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2403         with xstrdup.
2404         * symfile-mem.c (symbol_file_add_from_memory): Removed
2405         gdb_bfd_stash_filename.
2406
2407 2014-01-03  Doug Evans  <dje@google.com>
2408
2409         * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2410         output.
2411
2412 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
2413
2414         Update year range in copyright notice of all files.
2415
2416 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
2417
2418         * top.c (print_gdb_version): Set copyright year to 2014.
2419
2420 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
2421
2422         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2423
2424 For older changes see ChangeLog-2013.
2425 \f
2426 Local Variables:
2427 mode: change-log
2428 left-margin: 8
2429 fill-column: 74
2430 version-control: never
2431 coding: utf-8
2432 End: