1 2014-02-14 Jose E. Marchesi <jose.marchesi@oracle.com>
3 * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
4 the proper offsets to access fpregset_t.
6 2014-02-13 Sanimir Agovic <sanimir.agovic@intel.com>
8 * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
9 (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
10 * h8300-tdep.c (setmachinelist): Remove global.
11 * hppa-tdep.c (hppa_sigtramp): Remove global.
12 * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
13 RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
14 * ravenscar-thread.c (update_target_observer): Remove global.
15 * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.
17 2014-02-12 Tom Tromey <tromey@redhat.com>
19 * common/rsp-low.c: Update comments.
20 * common/rsp-low.h: Update comments.
22 2014-02-12 Tom Tromey <tromey@redhat.com>
24 * common/rsp-low.c (convert_ascii_to_int): Remove.
25 * common/rsp-low.h (convert_ascii_to_int): Don't declare.
27 2014-02-12 Tom Tromey <tromey@redhat.com>
29 * common/rsp-low.h (unhexify): Don't declare.
30 * common/rsp-low.c (unhexify): Remove.
32 2014-02-12 Tom Tromey <tromey@redhat.com>
34 * common/rsp-low.h (convert_int_to_ascii): Don't declare.
35 * common/rsp-low.c (convert_int_to_ascii): Remove.
37 2014-02-12 Tom Tromey <tromey@redhat.com>
39 * common/rsp-low.h (hexify): Don't declare.
40 * common/rsp-low.c (hexify): Remove.
42 2014-02-12 Tom Tromey <tromey@redhat.com>
44 * common/rsp-low.c (hexify): Never take strlen of argument.
46 2014-02-12 Tom Tromey <tromey@redhat.com>
48 * common/rsp-low.c (bin2hex): Never take strlen of argument.
49 * remote.c (extended_remote_run, remote_rcmd)
50 (remote_download_trace_state_variable, remote_save_trace_data)
51 (remote_set_trace_notes): Update.
52 * tracepoint.c (encode_source_string, tfile_write_status)
53 (tfile_write_uploaded_tsv): Update.
55 2014-02-12 Tom Tromey <tromey@redhat.com>
57 * tracepoint.c: Include rsp-low.h.
58 * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
59 * remote.c: Include rsp-low.h.
60 (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
61 (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
62 (remote_unescape_input): Move to common/rsp-low.c.
63 * common/rsp-low.h: New file.
64 * common/rsp-low.c: New file.
65 * Makefile.in (SFILES): Add common/rsp-low.c.
66 (HFILES_NO_SRCDIR): Add common/rsp-low.h.
67 (COMMON_OBS): Add rsp-low.o.
68 (rsp-low.o): New target.
70 2014-02-12 Tom Tromey <tromey@redhat.com>
72 * utils.h: Include print-utils.h.
73 (host_address_to_string, plongest, pulongest, phex, phex_nz)
74 (int_string, core_addr_to_string, core_addr_to_string_nz)
75 (hex_string, hex_string_custom): Don't declare.
76 * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
77 (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
78 (hex_string_custom, int_string, core_addr_to_string)
79 (core_addr_to_string_nz, host_address_to_string): Move to
81 * common/print-utils.h: New file.
82 * common/print-utils.c: New file
83 * Makefile.in (SFILES): Add common/print-utils.c.
84 (HFILES_NO_SRCDIR): Add common/print-utils.h.
85 (COMMON_OBS): Add print-utils.o.
86 (print-utils.o): New target.
88 2014-02-12 Tom Tromey <tromey@redhat.com>
90 * nios2-tdep.c (nios2_stub_frame_base_address): Remove.
92 2014-02-12 Mark Kettenis <kettenis@gnu.org>
94 * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.
96 2014-02-12 Mark Kettenis <kettenis@gnu.org>
98 * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
99 if a PT_IO ptrace request returns sucessfully but indicates that 0
100 bytes were transferred.
102 2014-02-12 Pedro Alves <palves@redhat.com>
103 Kevin Buettner <kevinb@redhat.com>
105 * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
106 TYPE_INSTANCE_FLAG_CODE_SPACE.
108 2014-02-12 Pedro Alves <palves@redhat.com>
110 * h8300-tdep.c (pseudo_from_raw_register)
111 (raw_from_pseudo_register): New functions.
112 (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
115 2014-02-12 Pedro Alves <palves@redhat.com>
117 * h8300-tdep.c (h8300_register_sim_regno): New function.
118 (h8300_gdbarch_init): Install h8300_register_sim_regno as
119 gdbarch_register_sim_regno hook.
121 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
123 * nios2-tdep.c (nios2_stub_frame_base): Remove global.
125 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
127 * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
129 2014-02-12 Mark Kettenis <kettenis@gnu.org>
131 * obsd-tdep.h (obsd_init_abi): New prototype.
132 * obsd-tdep.c: Define enum with OpenBSD signal numbers.
133 (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
134 (obsd_init_abi): New functions.
135 * i386obsd-tdep.c: Include "obsd-tdep.h".
136 (i386obsd_init_abi): Call obsd_init_abi.
137 * amd64obsd-tdep.c: Include "obsd-tdep.h".
138 (amd64obsd_init_abi): Call obsd_init_abi.
139 * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
140 obsd-tdep.c to gdb_target_obs.
142 2014-02-11 Jose E. Marchesi <jose.marchesi@oracle.com>
144 * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
145 double float arguments to 16-byte in the argument slots.
147 2014-02-11 Doug Evans <xdje42@gmail.com>
149 * configure.ac: Don't crash if pkg-config is not found and guile
150 wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
152 * configure: Regenerate.
154 2014-02-11 Yao Qi <yao@codesourcery.com>
156 * aix-thread.c (aix_thread_xfer_partial): Update comments.
157 * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
158 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
159 * gnu-nat.c (gnu_xfer_memory): Likewise.
160 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
161 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
162 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
163 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
165 2014-02-11 Yao Qi <yao@codesourcery.com>
167 * target.h (enum target_xfer_error): Rename to ...
168 (enum target_xfer_status): ... it. New. All users updated.
169 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
171 (TARGET_XFER_STATUS_ERROR_P): New macro.
172 (target_xfer_error_to_string): Remove declaration.
173 (target_xfer_status_to_string): Declare.
174 (target_xfer_partial_ftype): Adjust it.
175 (struct target_ops) <to_xfer_partial>: Return
176 target_xfer_status. Add argument xfered_len. Update
178 * target.c (target_xfer_error_to_string): Rename to ...
179 (target_xfer_status_to_string): ... it. New. All callers
181 (target_read_live_memory): Likewise. Call target_xfer_partial
182 instead of target_read.
183 (memory_xfer_live_readonly_partial): Return
184 target_xfer_status. Add argument xfered_len.
185 (raw_memory_xfer_partial): Likewise.
186 (memory_xfer_partial_1): Likewise.
187 (memory_xfer_partial): Likewise.
188 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
189 properly. Update debug message.
190 (default_xfer_partial, current_xfer_partial): Likewise.
191 (target_write_partial): Likewise.
192 (target_read_partial): Likewise. All callers updated.
193 (read_whatever_is_readable): Likewise.
194 (target_write_with_progress): Likewise.
195 (target_read_alloc_1): Likewise.
197 * aix-thread.c (aix_thread_xfer_partial): Likewise.
198 * auxv.c (procfs_xfer_auxv): Likewise.
199 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
200 * bfd-target.c (target_bfd_xfer_partial): Likewise.
201 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
202 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
203 * corefile.c (read_memory): Adjust.
204 * corelow.c (core_xfer_partial): Likewise.
205 * ctf.c (ctf_xfer_partial): Likewise.
206 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
208 (darwin_xfer_partial): Likewise.
209 * exec.c (section_table_xfer_memory_partial): Likewise. All
211 (exec_xfer_partial): Likewise.
212 * exec.h (section_table_xfer_memory_partial): Update
214 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
216 (gnu_xfer_partial): Likewise.
217 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
218 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
219 (ia64_hpux_xfer_solib_got): Likewise.
220 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
221 type of 'partial_len' to ULONGEST.
222 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
223 * linux-nat.c (linux_xfer_siginfo ): Likewise.
224 (linux_nat_xfer_partial): Likewise.
225 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
226 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
227 * monitor.c (monitor_xfer_memory): Likewise.
228 (monitor_xfer_partial): Likewise.
229 * procfs.c (procfs_xfer_partial): Likewise.
230 * record-btrace.c (record_btrace_xfer_partial): Likewise.
231 * record-full.c (record_full_xfer_partial): Likewise.
232 (record_full_core_xfer_partial): Likewise.
233 * remote-sim.c (gdbsim_xfer_memory): Likewise.
234 (gdbsim_xfer_partial): Likewise.
235 * remote.c (remote_write_bytes_aux): Likewise. All callers
237 (remote_write_bytes, remote_read_bytes): Likewise. All
239 (remote_flash_erase): Likewise. All callers updated.
240 (remote_write_qxfer): Likewise. All callers updated.
241 (remote_read_qxfer): Likewise. All callers updated.
242 (remote_xfer_partial): Likewise.
243 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
244 (rs6000_xfer_shared_libraries): Likewise.
245 * sol-thread.c (sol_thread_xfer_partial): Likewise.
246 (sol_thread_xfer_partial): Likewise.
247 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
248 (sparc_xfer_partial): Likewise.
249 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
251 (spu_xfer_partial): Likewise.
252 * spu-multiarch.c (spu_xfer_partial): Likewise.
253 * tracepoint.c (tfile_xfer_partial): Likewise.
254 * windows-nat.c (windows_xfer_memory): Likewise.
255 (windows_xfer_shared_libraries): Likewise.
256 (windows_xfer_partial): Likewise.
257 * valprint.c: Replace 'target_xfer_error' with
258 'target_xfer_status' in comments.
260 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
262 Checked in by Joel Brobecker <brobecker@adacore.com>.
263 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
265 2014-02-11 Joel Brobecker <brobecker@adacore.com>
267 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
270 2014-02-10 Will Newton <will.newton@linaro.org>
272 * elfread.c (elf_rel_plt_read): Look for a .got section if
273 looking up .got.plt fails.
274 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
275 on address passed to elf_gnu_ifunc_record_cache.
276 (elf_gnu_ifunc_resolve_addr): Likewise.
277 (elf_gnu_ifunc_resolver_return_stop): Likewise.
279 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
281 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
282 (X_RETTURN): New macro.
283 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
285 * sparc64-tdep.c (sparc64_init_abi): Hook
286 sparc_in_function_epilogue_p.
288 2014-02-10 Gary Benson <gbenson@redhat.com>
290 * symfile-debug.c (debug_qf_expand_symtabs_matching):
291 Rename name_matcher to symbol_matcher.
293 2014-02-10 Gary Benson <gbenson@redhat.com>
295 * symfile-debug.c (debug_qf_expand_symtabs_matching):
296 Use expand_symtabs_file_matcher_ftype and
297 expand_symtabs_symbol_matcher_ftype.
299 2014-02-10 Joel Brobecker <brobecker@adacore.com>
301 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
302 (struct ada_symbol_cache): New.
303 (ada_free_symbol_cache): Forward declare.
304 (struct ada_pspace_data): New.
305 (ada_pspace_data_handle): New static global.
306 (get_ada_pspace_data, ada_pspace_data_cleanup)
307 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
308 (cache_space, cache): Delete, now folded inside struct
310 (ada_get_symbol_cache): New function.
311 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
313 (_initialize_ada_language): Remove initialization of cache_space.
314 Move call to observer_attach_inferior_exit up, grouping it
315 with the other observer registrations inside this function.
316 Rename command to be more general. Add call to
317 register_program_space_data_with_cleanup.
319 2014-02-10 Joel Brobecker <brobecker@adacore.com>
321 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
322 ada_new_objfile_observer.
323 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
324 (_initialize_tasks): Update uses of ada_new_objfile_observer
325 and ada_tasks_normal_stop_observer.
327 2014-02-10 Joel Brobecker <brobecker@adacore.com>
329 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
330 returned by the 'Length attribute to integer.
332 2014-02-10 Joel Brobecker <brobecker@adacore.com>
334 * ada-lang.c (_initialize_ada_language): Initialize
337 2014-02-10 Joel Brobecker <brobecker@adacore.com>
339 * ada-lang.c (HASH_SIZE): New macro.
340 (struct cache_entry): New type.
341 (cache_space, cache): New static globals.
342 (ada_clear_symbol_cache, find_entry): New functions.
343 (lookup_cached_symbol, cache_symbol): Implement.
344 (ada_new_objfile_observer, ada_free_objfile_observer): New.
345 (_initialize_ada_language): Attach ada_new_objfile_observer
346 and ada_free_objfile_observer.
348 2014-02-10 Joel Brobecker <brobecker@adacore.com>
350 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
351 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
352 struct block * parameter.
353 (ada_lookup_symbol_list_worker): Constify local variable "block".
354 Remove cast which is no longer necessary.
356 2014-02-10 Doug Evans <xdje42@gmail.com>
358 Add Guile as an extension language.
359 * NEWS: Mention Guile scripting.
360 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
361 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
362 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
363 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
364 (CLIBS): Add GUILE_LIBS.
365 (install-guile): New rule.
367 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
368 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
369 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
370 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
371 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
372 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
373 (scm-type.o, scm-utils.o, scm-value.o): New rules.
374 * configure.ac: New option --with-guile.
375 * configure: Regenerate.
376 * config.in: Regenerate.
377 * auto-load.c: Remove #include "python/python.h". Add #include
378 "gdb/section-scripts.h".
379 (source_section_scripts): Handle Guile scripts.
380 (_initialize_auto_load): Add name of Guile objfile script to
381 scripts-directory help text.
382 * breakpoint.c (condition_command): Tweak comment to include Scheme.
383 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
384 (struct breakpoint): New member scm_bp_object.
385 * defs.h (enum command_control_type): New value guile_control.
386 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
388 (show_user): Update comment.
389 (_initialize_cli_cmds): Update help text for "show user". Update help
390 text for max-user-call-depth.
391 * cli/cli-script.c: Remove #include "python/python.h". Add #include
393 (multi_line_command_p): Add guile_control.
394 (print_command_lines): Handle guile_control.
395 (execute_control_command, recurse_read_control_structure): Ditto.
396 (process_next_line): Recognize "guile" commands.
397 * disasm.c (gdb_disassemble_info): Make non-static.
398 * disasm.h: #include "dis-asm.h".
399 (struct gdbarch): Add forward decl.
400 (gdb_disassemble_info): Declare.
401 * extension.c: #include "guile/guile.h".
402 (extension_languages): Add guile.
403 (get_ext_lang_defn): Handle EXT_LANG_GDB.
404 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
405 * gdbtypes.c (get_unsigned_type_max): New function.
406 (get_signed_type_minmax): New function.
407 * gdbtypes.h (get_unsigned_type_max): Declare.
408 (get_signed_type_minmax): Declare.
409 * guile/README: New file.
410 * guile/guile-internal.h: New file.
411 * guile/guile.c: New file.
412 * guile/guile.h: New file.
413 * guile/scm-arch.c: New file.
414 * guile/scm-auto-load.c: New file.
415 * guile/scm-block.c: New file.
416 * guile/scm-breakpoint.c: New file.
417 * guile/scm-disasm.c: New file.
418 * guile/scm-exception.c: New file.
419 * guile/scm-frame.c: New file.
420 * guile/scm-gsmob.c: New file.
421 * guile/scm-iterator.c: New file.
422 * guile/scm-lazy-string.c: New file.
423 * guile/scm-math.c: New file.
424 * guile/scm-objfile.c: New file.
425 * guile/scm-ports.c: New file.
426 * guile/scm-pretty-print.c: New file.
427 * guile/scm-safe-call.c: New file.
428 * guile/scm-string.c: New file.
429 * guile/scm-symbol.c: New file.
430 * guile/scm-symtab.c: New file.
431 * guile/scm-type.c: New file.
432 * guile/scm-utils.c: New file.
433 * guile/scm-value.c: New file.
434 * guile/lib/gdb.scm: New file.
435 * guile/lib/gdb/boot.scm: New file.
436 * guile/lib/gdb/experimental.scm: New file.
437 * guile/lib/gdb/init.scm: New file.
438 * guile/lib/gdb/iterator.scm: New file.
439 * guile/lib/gdb/printing.scm: New file.
440 * guile/lib/gdb/types.scm: New file.
441 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
442 (VPATH): Add $(GUILE_SRCDIR).
443 (GUILE_DIR): New variable.
444 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
445 (all): Add stamp-guile dependency.
446 (stamp-guile): New rule.
447 (clean-guile, install-guile, uninstall-guile): New rules.
448 (install-only): Add install-guile dependency.
449 (uninstall): Add uninstall-guile dependency.
450 (clean): Add clean-guile dependency.
452 2014-02-09 Doug Evans <xdje42@gmail.com>
454 Revert this patch (which I approved, mea culpa).
456 2014-02-08 Mark Kettenis <kettenis@gnu.org>
458 * Makefile.in (all-lib): Remove.
459 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
461 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
463 Fix Python stack corruption.
464 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
467 2014-02-08 Mark Kettenis <kettenis@gnu.org>
469 * Makefile.in (all-lib): Remove.
470 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
472 2014-02-07 Doug Evans <dje@google.com>
474 * extension-priv.h (extension_language_script_ops): Add comment.
475 (extension_language_ops): Add comment.
476 (active_ext_lang_state): Fix typo in comment.
478 2014-02-07 Pedro Alves <palves@redhat.com>
480 * infrun.c (handle_signal_stop) <signal arrives while stepping
481 over a breakpoint>: Switch back to the stepping thread.
483 2014-02-07 Yao Qi <yao@codesourcery.com>
485 * target.c (target_xfer_partial): Return zero if LEN is zero.
487 2014-02-07 Yao Qi <yao@codesourcery.com>
489 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
490 (ld_so_xfer_auxv): Likewise.
491 * bfd-target.c (target_bfd_xfer_partial): Likewise.
492 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
493 * corelow.c (core_xfer_partial): Likewise.
494 * ctf.c (ctf_xfer_partial): Likewise.
495 * darwin-nat.c (darwin_read_dyld_info): Likewise.
496 (darwin_xfer_partial): Likewise.
497 * exec.c (exec_xfer_partial): Likewise.
498 * gnu-nat.c (gnu_xfer_partial): Likewise.
499 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
500 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
501 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
502 * linux-nat.c (linux_xfer_siginfo): Likewise.
503 (linux_proc_xfer_spu): Likewise.
504 * procfs.c (procfs_xfer_partial): Likewise.
505 * record-full.c (record_full_xfer_partial): Likewise.
506 (record_full_core_xfer_partial): Likewise.
507 * remote-sim.c (gdbsim_xfer_partial): Likewise.
508 * remote.c (remote_write_qxfer): Likewise.
509 (remote_write_qxfer, remote_read_qxfer): Likewise.
510 (remote_xfer_partial): Likewise.
511 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
512 (rs6000_xfer_shared_libraries): Likewise.
513 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
514 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
515 (spu_xfer_partial): Likewise.
516 * target.c (memory_xfer_partial_1): Likewise.
517 * tracepoint.c (tfile_xfer_partial): Likewise.
518 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
519 (windows_xfer_partial): Likewise.
521 2014-02-07 Yao Qi <yao@codesourcery.com>
523 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
525 (core_xfer_shared_libraries_aix): Likewise.
526 * gdbarch.c, gdbarch.h: Regenerated.
527 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
528 ULONGEST. Change 'len_avail' type to ULONGEST.
529 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
530 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
532 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
534 2014-02-07 Yao Qi <yao@codesourcery.com>
536 * corefile.c (memory_error): Get 'exception' from ERR and pass
537 'exception' to throw_error.
539 2014-02-06 Doug Evans <xdje42@gmail.com>
541 * configure.ac (libpython checking): Remove all but python.o from
542 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
543 * configure: Regenerate.
545 * Makefile.in (SFILES): Add extension.c.
546 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
547 (COMMON_OBS): Add extension.o.
548 * extension.h: New file.
549 * extension-priv.h: New file.
550 * extension.c: New file.
552 * python/python-internal.h: #include "extension.h".
553 (gdbpy_auto_load_enabled): Declare.
554 (gdbpy_apply_val_pretty_printer): Declare.
555 (gdbpy_apply_frame_filter): Declare.
556 (gdbpy_preserve_values): Declare.
557 (gdbpy_breakpoint_cond_says_stop): Declare.
558 (gdbpy_breakpoint_has_cond): Declare.
559 (void source_python_script_for_objfile): Delete.
560 * python/python.c: #include "extension-priv.h".
561 Delete inclusion of "observer.h".
562 (extension_language_python): Moved here and renamed from
563 script_language_python in py-auto-load.c.
564 Redefined to be of type extension_language_defn.
565 (python_extension_script_ops): New global.
566 (python_extension_ops): New global.
567 (struct python_env): New member previous_active.
568 (restore_python_env): Call restore_active_ext_lang.
569 (ensure_python_env): Call set_active_ext_lang.
570 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
572 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
574 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
576 (gdbpy_eval_from_control_command): Renamed from
577 eval_python_from_control_command, made static. New arg extlang.
578 (gdbpy_source_script) Renamed from source_python_script, made static.
580 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
581 result to int. New arg extlang.
582 (gdbpy_source_objfile_script): Renamed from
583 source_python_script_for_objfile, made static. New arg extlang.
584 (gdbpy_start_type_printers): Renamed from start_type_printers, made
585 static. New args extlang, extlang_printers. Change result type to
587 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
588 static. New arg extlang. Rename arg printers to extlang_printers
589 and change type to ext_lang_type_printers *.
590 (gdbpy_free_type_printers): Renamed from free_type_printers, made
591 static. Replace argument arg with extlang, extlang_printers.
592 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
593 (!HAVE_PYTHON, source_python_script): Delete.
594 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
595 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
596 (!HAVE_PYTHON, start_type_printers): Delete.
597 (!HAVE_PYTHON, apply_type_printers): Delete.
598 (!HAVE_PYTHON, free_type_printers): Delete.
599 (_initialize_python): Delete call to observer_attach_before_prompt.
600 (finalize_python): Set/restore active extension language.
601 (gdbpy_finish_initialization) Renamed from
602 finish_python_initialization, made static. New arg extlang.
603 (gdbpy_initialized): New function.
604 * python/python.h: #include "extension.h". Delete #include
605 "value.h", "mi/mi-cmds.h".
606 (extension_language_python): Declare.
607 (GDBPY_AUTO_FILE_NAME): Delete.
608 (enum py_bt_status): Moved to extension.h and renamed to
610 (enum frame_filter_flags): Moved to extension.h.
611 (enum py_frame_args): Moved to extension.h and renamed to
613 (finish_python_initialization): Delete.
614 (eval_python_from_control_command): Delete.
615 (source_python_script): Delete.
616 (apply_val_pretty_printer): Delete.
617 (apply_frame_filter): Delete.
618 (preserve_python_values): Delete.
619 (gdbpy_script_language_defn): Delete.
620 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
621 (start_type_printers, apply_type_printers, free_type_printers): Delete.
623 * auto-load.c: #include "extension.h".
624 (GDB_AUTO_FILE_NAME): Delete.
625 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
626 (script_language_gdb): Delete, moved to extension.c and renamed to
627 extension_language_gdb.
628 (source_gdb_script_for_objfile): Delete.
629 (auto_load_pspace_info): New member unsupported_script_warning_printed.
630 (loaded_script): Change type of language member to
631 struct extension_language_defn *.
632 (init_loaded_scripts_info): Initialize
633 unsupported_script_warning_printed.
634 (maybe_add_script): Make static. Change type of language arg to
635 struct extension_language_defn *.
636 (clear_section_scripts): Reset unsupported_script_warning_printed.
637 (auto_load_objfile_script_1): Rewrite to use extension language API.
638 (auto_load_objfile_script): Make public. Remove support-compiled-in
639 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
640 (source_section_scripts): Rewrite to use extension language API.
641 (load_auto_scripts_for_objfile): Rewrite to use
642 auto_load_scripts_for_objfile.
643 (collect_matching_scripts_data): Change type of language member to
644 struct extension_language_defn *.
645 (auto_load_info_scripts): Change type of language arg to
646 struct extension_language_defn *.
647 (unsupported_script_warning_print): New function.
648 (script_not_found_warning_print): Make static.
649 (_initialize_auto_load): Rewrite construction of scripts-directory
651 * auto-load.h (struct objfile): Add forward decl.
652 (struct script_language): Delete.
653 (struct auto_load_pspace_info): Add forward decl.
654 (struct extension_language_defn): Add forward decl.
655 (maybe_add_script): Delete.
656 (auto_load_objfile_script): Declare.
657 (script_not_found_warning_print): Delete.
658 (auto_load_info_scripts): Update prototype.
659 (auto_load_gdb_scripts_enabled): Declare.
660 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
661 auto_load_python_scripts_enabled and made public.
662 (script_language_python): Delete, moved to python.c.
663 (gdbpy_script_language_defn): Delete.
664 (info_auto_load_python_scripts): Update to use
665 extension_language_python.
667 * breakpoint.c (condition_command): Replace call to
668 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
669 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
670 with call to breakpoint_ext_lang_cond_says_stop.
671 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
672 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
673 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
674 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
676 (local_setattro): Print name of extension language with existing
679 * valprint.c (val_print, value_print): Update to call
680 apply_ext_lang_val_pretty_printer.
681 * cp-valprint.c (cp_print_value): Update call to
682 apply_ext_lang_val_pretty_printer.
683 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
684 (gdbpy_apply_val_pretty_printer): Renamed from
685 apply_val_pretty_printer. New arg extlang.
686 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
688 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
689 extension language API.
690 * cli/cli-script.c (execute_control_command): Update to call
691 eval_ext_lang_from_control_command.
693 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
694 enum ext_lang_bt_status values. Update call to
695 apply_ext_lang_frame_filter.
696 (mi_cmd_stack_list_locals): Ditto.
697 (mi_cmd_stack_list_args): Ditto.
698 (mi_cmd_stack_list_variables): Ditto.
699 * mi/mi-main.c: Delete #include "python/python-internal.h".
700 Add #include "extension.h".
701 (mi_cmd_list_features): Replace reference to python internal variable
702 gdb_python_initialized with call to ext_lang_initialized_p.
704 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
705 Update to use enum ext_lang_frame_args. Update to call
706 apply_ext_lang_frame_filter.
707 * python/py-framefilter.c (extract_sym): Update to use enum
709 (extract_value, py_print_type, py_print_value): Ditto.
710 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
711 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
712 (py_print_frame): Ditto.
713 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
714 New arg extlang. Update to use enum ext_lang_bt_status.
716 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
717 finish_python_initialization. Replace with call to
718 finish_ext_lang_initialization.
720 * typeprint.c (do_free_global_table): Update to call
721 free_ext_lang_type_printers.
722 (create_global_typedef_table): Update to call
723 start_ext_lang_type_printers.
724 (find_global_typedef): Update to call apply_ext_lang_type_printers.
725 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
726 (type_print_options): Change type of global_printers from "void *"
727 to "struct ext_lang_type_printers *".
729 * value.c (preserve_values): Update to call preserve_ext_lang_values.
730 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
731 (gdbpy_preserve_values): Renamed from preserve_python_values.
733 (!HAVE_PYTHON, preserve_python_values): Delete.
735 * utils.c (quit_flag): Delete, moved to extension.c.
736 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
739 * eval.c: Delete #include "python/python.h".
740 * main.c: Delete #include "python/python.h".
742 * defs.h: Update comment.
744 2014-02-06 Joel Brobecker <brobecker@adacore.com>
748 2014-02-05 Mark Kettenis <kettenis@gnu.org>
750 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
753 2014-02-05 Yao Qi <yao@codesourcery.com>
755 * remote.c (remote_pass_signals): Remove local 'buf' and use
757 (remote_program_signals): Likewise.
759 2014-02-05 Yao Qi <yao@codesourcery.com>
761 * ctf.c: Include "inferior.h" and "gdbthread.h".
762 (CTF_PID): A new macro.
763 (ctf_open): Call inferior_appeared and add_thread_silent.
764 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
765 (ctf_thread_alive): New function.
766 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
768 2014-02-05 Yao Qi <yao@codesourcery.com>
772 2013-05-24 Yao Qi <yao@codesourcery.com>
774 * tracepoint.c (TFILE_PID): Remove.
775 (tfile_open): Don't add thread and inferior.
776 (tfile_close): Don't set 'inferior_ptid'. Don't call
777 exit_inferior_silent.
778 (tfile_thread_alive): Remove.
779 (init_tfile_ops): Don't set field 'to_thread_alive' of
782 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
784 * remote.c (remote_start_remote): Call remote_check_symbols even
785 if only symbol-file (not file) has been given.
787 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
789 * gdbarch.sh (skip_entrypoint): New callback.
790 * gdbarch.c, gdbarch.h: Regenerate.
791 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
792 * infrun.c (fill_in_stop_func): Likewise.
793 * ppc-linux-tdep.c: Include "elf/ppc64.h".
794 (ppc_elfv2_elf_make_msymbol_special): New function.
795 (ppc_elfv2_skip_entrypoint): Likewise.
796 (ppc_linux_init_abi): Install them for ELFv2.
798 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
800 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
801 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
802 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
803 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
804 structures returned in GPRs.
806 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
808 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
809 offset to the stack parameter list for the ELFv2 ABI.
811 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
813 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
814 set_gdbarch_convert_from_func_ptr_addr and
815 set_gdbarch_elf_make_msymbol_special for ELFv1.
816 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
817 function descriptors on ELFv1.
818 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
819 set up r12 at function entry.
821 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
823 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
824 (struct gdbarch_tdep): New member elf_abi.
826 * rs6000-tdep.c: Include "elf/ppc64.h".
827 (rs6000_gdbarch_init): Detect ELF ABI version.
829 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
831 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
832 within a register pair holding a DFP 128-bit value on little-endian.
833 (ppc64_sysv_abi_return_value_base): Likewise.
834 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
835 (dfp_pseudo_register_write): Likewise.
837 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
839 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
840 offset on little-endian when passing _Decimal32.
841 (ppc64_sysv_abi_return_value_base): Likewise for return values.
843 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
845 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
846 of the overlapped FP register within the VSX register on little-
848 (efpr_pseudo_register_write): Likewise.
850 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
852 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
853 offset on little-endian when passing small structures.
855 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
857 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
858 (struct ppc64_sysv_argpos): New data structure.
859 (ppc64_sysv_abi_push_float): Remove.
860 (ppc64_sysv_abi_push_val): New function.
861 (ppc64_sysv_abi_push_integer): Likewise.
862 (ppc64_sysv_abi_push_freg): Likewise.
863 (ppc64_sysv_abi_push_vreg): Likewise.
864 (ppc64_sysv_abi_push_param): Likewise.
865 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
866 (ppc64_sysv_abi_return_value_base): New function.
867 (ppc64_sysv_abi_return_value): Refactor to use it.
869 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
871 * NEWS: Document new target powerpc64le-*-linux*.
873 2014-02-04 Mark Kettenis <kettenis@gnu.org>
875 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
876 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
878 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
879 register set used in ELF core dumps. Add floating-point register set.
881 2014-02-03 Kevin Buettner <kevinb@redhat.com>
883 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
884 dwarf2_to_gdb[] table using symbolic constants. Adjust
885 penultimate entry from number representing the PC register
886 to symbolic constant representing the MDR register. Add
887 constant for the PC register to the end of the table.
889 2014-02-03 Mark Kettenis <kettenis@gnu.org>
891 * bsd-kvm.c: Include <sys/param.h>
893 2014-02-03 Mark Kettenis <kettenis@gnu.org>
895 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
897 2014-01-31 Joel Brobecker <brobecker@adacore.com>
899 * ada-lang.h (clear_ada_sym_cache): Delete.
901 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
903 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
905 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
907 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
908 the sigreturn register save area only if the syscall is
911 2014-01-29 Joel Brobecker <brobecker@adacore.com>
913 * valops.c (value_slice): Minor reformatting.
915 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
917 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
919 2014-01-28 Joel Brobecker <brobecker@adacore.com>
921 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
923 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
924 (ada_ignore_descriptive_types_p): New static global.
925 (find_parallel_type_by_descriptive_type): Return immediately
926 if ada_ignore_descriptive_types_p is set.
927 (_initialize_ada_language): Register new commands "maintenance
928 set ada", "maintenance show ada", "maintenance set ada
929 ignore-descriptive-types" and "maintenance show ada
930 ignore-descriptive-types".
931 * NEWS: Add entry for new "maint ada set/show
932 ignore-descriptive-types" commands.
934 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
936 * record-btrace.c (record_btrace_close): Call btrace_teardown
939 2014-01-27 Joel Brobecker <brobecker@adacore.com>
941 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
944 2014-01-27 Joel Brobecker <brobecker@adacore.com>
946 * ada-typeprint (type_is_full_subrange_of_target_type):
948 (print_range): Add parameter bounds_prefered_p. If not set,
949 try printing range types using the name of their base type.
950 (print_range_type): Add parameter bounds_prefered_p.
951 Use it in call to print_range.
952 (print_array_type, ada_print_type): Update calls to print_range
953 and print_range_type.
955 2014-01-27 Joel Brobecker <brobecker@adacore.com>
957 * ada-typeprint.c (print_array_type, print_choices, print_range)
958 (print_range_bound, print_dynamic_range_bound, print_range_type):
961 2014-01-27 Joel Brobecker <brobecker@adacore.com>
963 * ada-typeprint.c (print_range): Add missing empty line
964 after local declaration.
966 2014-01-27 Joel Brobecker <brobecker@adacore.com>
968 * ada-valprint.c (print_optional_low_bound): Get index_type's
969 target type for as long as it is a TYPE_CODE_RANGE.
971 2014-01-27 Joel Brobecker <brobecker@adacore.com>
973 * procfs.c (procfs_make_note_section): Remove assertion and
976 2014-01-24 Yao Qi <yao@codesourcery.com>
978 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
979 * corelow.c (get_core_siginfo): Likewise.
981 2014-01-24 Yao Qi <yao@codesourcery.com>
983 * remote.c (remote_write_bytes_aux): Change type of 'len' to
984 ULONGEST. Don't check 'len' is negative.
985 (remote_write_bytes): Change type of 'len' to ULONGEST.
987 2014-01-23 Tom Tromey <tromey@redhat.com>
990 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
991 Handle exception from frame.block.
992 (FrameVars.fetch_frame_locals): Likewise.
994 2014-01-23 Tom Tromey <tromey@redhat.com>
997 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
998 on a NULL pointer. Move "goto error" to correct place.
1000 2014-01-23 Tom Tromey <tromey@redhat.com>
1003 * python/py-framefilter.c (apply_frame_filter): Call
1004 ensure_python_env after computing gdbarch.
1006 2014-01-23 Yao Qi <yao@codesourcery.com>
1008 * target.c (raw_memory_xfer_partial): Change argument type
1009 from void * to gdb_byte *.
1010 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
1012 2014-01-22 Doug Evans <dje@google.com>
1014 New gdbserver option --debug-format=timestamp.
1017 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
1019 * syscalls/s390x-linux.xml: New file.
1020 * syscalls/s390-linux.xml: New file.
1021 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
1022 (XML_SYSCALL_FILENAME_S390X): Likewise.
1023 (op_svc): New enum value for SVC opcode.
1024 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
1025 (s390_linux_get_syscall_number): New function.
1026 (s390_gdbarch_init): Register '*get_syscall_number' and the
1027 syscall xml file name.
1028 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1029 "s390-linux.xml" and "s390x-linux.xml".
1030 * NEWS: Announce new feature.
1032 2014-01-22 Baruch Siach <baruch@tkos.co.il>
1034 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
1036 2014-01-22 Pedro Alves <palves@redhat.com>
1038 * xtensa-config.c: Include defs.h.
1040 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1042 * common/common-utils.h: Add "ARI:" comment beside __func__
1045 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1047 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
1048 documentation a bit.
1050 2014-01-21 Roland McGrath <mcgrathr@google.com>
1052 * configure.ac: Call AM_PROG_INSTALL_STRIP.
1053 * configure: Regenerate.
1054 * aclocal.m4: Regenerate.
1055 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
1056 New substituted variables.
1057 (install-strip): New target.
1058 (INSTALL_SCRIPT): New substituted variable.
1059 (FLAGS_TO_PASS): Add it.
1060 (install-only): Use $(INSTALL_SCRIPT) rather than
1061 $(INSTALL_PROGRAM) for gcore.
1063 2014-01-20 Tom Tromey <tromey@redhat.com>
1065 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
1068 2014-01-20 Tom Tromey <tromey@redhat.com>
1070 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
1071 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
1072 (deprecated_cmd_warning, complete_on_cmdlist): Update.
1073 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
1074 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
1075 (struct cmd_list_element) <flags>: Remove.
1076 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
1077 doc_allocated>: New fields.
1078 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
1080 * maint.c (maintenance_do_deprecate): Update.
1081 * top.c (execute_command): Update.
1083 2014-01-20 Baruch Siach <baruch@tkos.co.il>
1085 * xtensa-linux-nat.c: Include asm/ptrace.h.
1087 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1089 * Makefile.in (SFILES): Add d-support.c.
1090 (COMMON_OBS): Add d-support.o.
1091 * d-lang.h (d_parse_symbol): Add comment, now defined in
1093 * d-lang.c (parse_call_convention)
1094 (parse_attributes, parse_function_types)
1095 (parse_function_args, parse_type, parse_identifier)
1096 (call_convention_p, d_parse_symbol): Move functions to ...
1097 * d-support.c: ... New file.
1099 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1101 * d-lang.h (d_parse_symbol): Add declaration.
1102 * d-lang.c (extract_identifiers)
1103 (extract_type_info): Remove functions.
1104 (parse_call_convention, parse_attributes)
1105 (parse_function_types, parse_function_args)
1106 (parse_type, parse_identifier, call_convention_p)
1107 (d_parse_symbol): New functions.
1108 (d_demangle): Use d_parse_symbol to demangle D symbols.
1110 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1112 * d-lang.h (struct builtin_d_type): New data type.
1113 (builtin_d_type): Add declaration.
1114 * d-lang.c (d_language_arch_info, build_d_types)
1115 (builtin_d_type): New functions.
1116 (enum d_primitive_types): New data type.
1117 (d_language_defn): Change c_language_arch_info to
1118 d_language_arch_info.
1119 (d_type_data): New static variable.
1120 (_initialize_d_language): Initialize d_type_data.
1122 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1124 * d-lang.h (d_main_name): Add declaration.
1125 * d-lang.c (d_main_name): New function.
1126 * symtab.c (find_main_name): Add call to d_main_name.
1128 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1130 * d-lang.c (d_language_defn): Change macro_expansion_c to
1133 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1135 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1137 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
1139 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1140 gdb_exception" declaration.
1141 * remote.c (getpkt_or_notif_sane): Likewise.
1143 2014-01-17 Doug Evans <dje@google.com>
1145 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1146 function, contents of dirnames_to_char_ptr_vec_append moved here.
1147 (delim_string_to_char_ptr_vec): New function.
1148 (dirnames_to_char_ptr_vec_append): Rewrite.
1149 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1151 2014-01-17 Doug Evans <dje@google.com>
1153 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1155 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1156 #include "common-utils.h".
1157 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1158 * common/vec.h (VEC_ASSERT_PASS): Update.
1159 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1160 (MACH_CHECK_ERROR): Update.
1162 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1164 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1166 * gdbarch.h: Regenerate.
1168 2014-01-16 Tom Tromey <tromey@redhat.com>
1170 * value.c (struct value) <regnum>: Move earlier.
1172 2014-01-16 Tom Tromey <tromey@redhat.com>
1174 * remote.c (extended_remote_create_inferior): Rename from
1175 extended_remote_create_inferior_1. Add "ops" argument. Remove
1178 2014-01-16 Pedro Alves <palves@redhat.com>
1180 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1181 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1184 2014-01-16 Doug Evans <dje@google.com>
1186 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1188 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1190 * btrace.h (btrace_thread_flag): New.
1191 (struct btrace_thread_info) <flags>: New.
1192 * record-btrace.c (record_btrace_resume_thread)
1193 (record_btrace_find_thread_to_move, btrace_step_no_history)
1194 (btrace_step_stopped, record_btrace_start_replaying)
1195 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1196 (record_btrace_find_resume_thread): New.
1197 (record_btrace_resume, record_btrace_wait): Extend.
1198 (record_btrace_can_execute_reverse): New.
1199 (record_btrace_open): Fail in non-stop mode.
1200 (record_btrace_set_replay): Split into this, ...
1201 (record_btrace_stop_replaying): ... this, ...
1202 (record_btrace_clear_histories): ... and this.
1203 (init_record_btrace_ops): Init to_can_execute_reverse.
1204 * NEWS: Announce it.
1206 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1208 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1209 (forward_target_decr_pc_after_break)
1210 (target_decr_pc_after_break): New.
1211 * target.c (forward_target_decr_pc_after_break)
1212 (target_decr_pc_after_break): New.
1213 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1214 instead of gdbarch_decr_pc_after_break.
1215 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1216 instead of gdbarch_decr_pc_after_break.
1217 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1218 instead of gdbarch_decr_pc_after_break.
1219 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1220 instead of gdbarch_decr_pc_after_break.
1221 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1222 instead of gdbarch_decr_pc_after_break.
1223 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1224 instead of gdbarch_decr_pc_after_break.
1226 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1228 * btrace.c: Include regcache.h.
1229 (btrace_add_pc): New.
1230 (btrace_enable): Call btrace_add_pc.
1231 (btrace_is_empty): New.
1232 * btrace.h (btrace_is_empty): New.
1233 * record-btrace.c (require_btrace, record_btrace_info): Call
1236 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1238 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1239 Support delta reads.
1240 (linux_disable_btrace): Change return type.
1241 * common/linux-btrace.h (linux_read_btrace): Change parameters
1242 and return type to allow error reporting. Update users.
1243 (linux_disable_btrace): Change return type. Update users.
1244 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1246 (btrace_error): New.
1247 (btrace_block) <begin>: Comment on BEGIN == 0.
1248 * btrace.c (btrace_compute_ftrace): Start from the end of
1250 (btrace_stitch_trace, btrace_clear_history): New.
1251 (btrace_fetch): Read delta trace, return if replaying.
1252 (btrace_clear): Move clear history code to btrace_clear_history.
1253 (parse_xml_btrace): Throw an error if parsing failed.
1254 * target.h (struct target_ops) <to_read_btrace>: Change parameters
1255 and return type to allow error reporting.
1256 (target_read_btrace): Change parameters and return type to allow
1258 * target.c (target_read_btrace): Update.
1259 * remote.c (remote_read_btrace): Support delta reads. Pass
1261 * NEWS: Announce it.
1263 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1265 * record.h (record_btrace_frame_unwind)
1266 (record_btrace_tailcall_frame_unwind): New declarations.
1267 * dwarf2-frame: Include record.h
1268 (dwarf2_frame_cfa): Throw an error for btrace frames.
1269 * record-btrace.c: Include hashtab.h.
1270 (btrace_get_bfun_name): New.
1271 (btrace_call_history): Call btrace_get_bfun_name.
1272 (struct btrace_frame_cache): New.
1274 (bfcache_hash, bfcache_eq, bfcache_new): New.
1275 (btrace_get_frame_function): New.
1276 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1277 (record_btrace_frame_this_id): Compute own id.
1278 (record_btrace_frame_prev_register): Provide PC, throw_error
1279 for all other registers.
1280 (record_btrace_frame_sniffer): Detect btrace frames.
1281 (record_btrace_tailcall_frame_sniffer): New.
1282 (record_btrace_frame_dealloc_cache): New.
1283 (record_btrace_frame_unwind): Add new functions.
1284 (record_btrace_tailcall_frame_unwind): New.
1285 (_initialize_record_btrace): Allocate cache.
1286 * btrace.c (btrace_clear): Call reinit_frame_cache.
1287 * NEWS: Announce it.
1289 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1291 * record-btrace.c (record_btrace_set_replay)
1292 (record_btrace_goto_begin, record_btrace_goto_end)
1293 (record_btrace_goto): New.
1294 (init_record_btrace_ops): Initialize them.
1295 * NEWS: Announce it.
1297 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1299 * record-btrace.c (record_btrace_find_new_threads)
1300 (record_btrace_thread_alive): New.
1301 (init_record_btrace_ops): Initialize to_find_new_threads and
1304 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1306 * record-btrace.c (record_btrace_resume): New.
1307 (record_btrace_wait): New.
1308 (init_record_btrace_ops): Initialize to_wait and to_resume.
1310 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1312 * record-btrace.c (record_btrace_xfer_partial)
1313 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1314 (record_btrace_allow_memory_access): New.
1315 (init_record_btrace_ops): Initialize new methods.
1316 * target.c (raw_memory_xfer_partial): Bail out if target reports
1317 that this memory is not available.
1319 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1321 * target.h (target_ops) <to_insert_breakpoint>
1322 <to_remove_breakpoint>: Add target_ops parameter.
1323 (forward_target_insert_breakpoint): New.
1324 (forward_target_remove_breakpoint): New.
1325 (memory_remove_breakpoint, memory_insert_breakpoint):
1326 Add target_ops parameter.
1327 * target.c (target_insert_breakpoint): Split into this and ...
1328 (forward_target_insert_breakpoint): ... this.
1329 (target_remove_breakpoint): Split into this and ...
1330 (forward_target_remove_breakpoint): ... this.
1331 (debug_to_insert_breakpoint): Add target_ops parameter.
1332 Call forward_target_insert_breakpoint.
1333 (debug_to_remove_breakpoint): Add target_ops parameter.
1334 Call forward_target_remove_breakpoint.
1335 (update_current_target): Do not inherit or default to_insert_breakpoint
1336 and to_remove_breakpoint.
1337 * corelow.c (ignore): Add target_ops parameter.
1338 * exec.c (ignore): Add target_ops parameter.
1339 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1340 Add target_ops parameter.
1341 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1342 Add target_ops parameter.
1343 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1344 Add target_ops parameter.
1345 * record-full.c (record_full_beneath_to_insert_breakpoint)
1346 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1347 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1348 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1349 (record_full_core_remove_breakpoint): Add target_ops parameter.
1351 (record_full_beneath_to_insert_breakpoint_ops)
1352 (record_full_beneath_to_remove_breakpoint_ops)
1353 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1354 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1355 tmp_to_remove_breakpoint_ops,
1356 record_full_beneath_to_insert_breakpoint_ops, and
1357 record_full_beneath_to_remove_breakpoint_ops.
1358 * remote-m32r-sdi.c (m32r_insert_breakpoint)
1359 (m32r_remove_breakpoint): Add target_ops parameter.
1360 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1361 Add target_ops parameter.
1362 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1363 Add target_ops parameter.
1365 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1366 Markus Metzger <markus.t.metzger@intel.com>
1368 * record-btrace.c: Include frame-unwind.h.
1369 (record_btrace_frame_unwind_stop_reason)
1370 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1371 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1373 (init_record_btrace_ops): Install it.
1375 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1377 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1380 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1382 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1385 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1387 * frame-unwind.c: Include target.h.
1388 (frame_unwind_try_unwinder): New function with code from ...
1389 (frame_unwind_find_by_frame): ... here. New variable
1390 unwinder_from_target, call also target_get_unwinder)
1391 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1392 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1393 * target.h (struct target_ops): New fields to_get_unwinder and
1394 to_get_tailcall_unwinder.
1395 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1397 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1399 * record-btrace.c (record_btrace_fetch_registers)
1400 (record_btrace_store_registers)
1401 (record_btrace_to_prepare_to_store): New.
1402 (init_record_btrace_ops): Add the above.
1404 2014-01-16 Tom Tromey <tromey@redhat.com>
1406 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1407 * target.h (struct target_ops) <to_prepare_to_store>: Add
1409 (target_prepare_to_store): Add argument.
1410 * target.c (debug_to_prepare_to_store): Add argument.
1411 (update_current_target): Update.
1412 * remote.c (remote_prepare_to_store): Add 'self' argument.
1413 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1414 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1415 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1416 * record-full.c (record_full_core_prepare_to_store): Add 'self'
1418 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1419 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1420 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1421 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1422 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1424 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1426 * btrace.h (replay) <replay>: New.
1427 (btrace_is_replaying): New.
1428 * btrace.c (btrace_clear): Free replay iterator.
1429 (btrace_is_replaying): New.
1430 * record-btrace.c (record_btrace_is_replaying): New.
1431 (record_btrace_info): Print insn number if replaying.
1432 (record_btrace_insn_history): Start at replay position.
1433 (record_btrace_call_history): Start at replay position.
1434 (init_record_btrace_ops): Init to_record_is_replaying.
1436 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1438 * record-btrace.c (record_btrace_insn_history_range): Include
1440 (record_btrace_insn_history_from): Adjust range.
1441 (record_btrace_call_history_range): Include
1443 (record_btrace_call_history_from): Adjust range.
1444 * NEWS: Announce changes.
1446 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1448 * record.h (enum record_print_flag)
1449 <record_print_indent_calls>: New.
1450 * record.c (get_call_history_modifiers): Recognize /c modifier.
1451 (_initialize_record): Document /c modifier.
1452 * record-btrace.c (btrace_call_history): Add btinfo parameter.
1453 Reorder fields. Optionally indent the function name. Update
1455 * NEWS: Announce changes.
1457 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1459 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1461 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1463 * btrace.c (ftrace_new_function): Start counting at one.
1464 * record-btrace.c (record_btrace_info): Adjust number of calls
1466 * NEWS: Announce it.
1468 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1470 * record-btrace.c (btrace_call_history_insn_range): Print
1471 insn range as [begin, end].
1473 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1475 * btrace.h (struct btrace_func_link): New.
1476 (enum btrace_function_flag): New.
1477 (struct btrace_inst): Rename to ...
1478 (struct btrace_insn): ...this. Update all users.
1479 (struct btrace_func) <ibegin, iend>: Remove.
1480 (struct btrace_func_link): New.
1481 (struct btrace_func): Rename to ...
1482 (struct btrace_function): ...this. Update all users.
1483 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1484 (number, level, flags>: New.
1485 (struct btrace_insn_iterator): Rename to ...
1486 (struct btrace_insn_history): ...this.
1488 (struct btrace_insn_iterator, btrace_call_iterator): New.
1489 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1490 (struct btrace_target_info) <begin, end, level>
1491 <insn_history, call_history>: New.
1492 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1493 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1494 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1495 (btrace_call_number, btrace_call_begin, btrace_call_end)
1496 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1497 (btrace_find_function_by_number, btrace_set_insn_history)
1498 (btrace_set_call_history): New.
1499 * btrace.c (btrace_init_insn_iterator)
1500 (btrace_init_func_iterator, compute_itrace): Remove.
1501 (ftrace_print_function_name, ftrace_print_filename)
1502 (ftrace_skip_file): Change
1504 (ftrace_init_func): Remove.
1505 (ftrace_debug): Use new btrace_function fields.
1506 (ftrace_function_switched): Also consider gaining and
1507 losing symbol information).
1508 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1509 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1510 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1512 (ftrace_new_function): Move. Remove debug print.
1513 (ftrace_update_lines, ftrace_update_insns): New.
1514 (ftrace_update_function): Check for call, ret, and jump.
1515 (compute_ftrace): Renamed to ...
1516 (btrace_compute_ftrace): ...this. Rewritten to compute call
1518 (btrace_fetch, btrace_clear): Updated.
1519 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1520 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1521 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1522 (btrace_call_number, btrace_call_begin, btrace_call_end)
1523 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1524 (btrace_find_function_by_number, btrace_set_insn_history)
1525 (btrace_set_call_history): New.
1526 * record-btrace.c (require_btrace): Use new btrace thread
1528 (record_btrace_info, btrace_insn_history)
1529 (record_btrace_insn_history, record_btrace_insn_history_range):
1530 Use new btrace thread info fields and new iterator.
1531 (btrace_func_history_src_line): Rename to ...
1532 (btrace_call_history_src_line): ...this. Use new btrace
1534 (btrace_func_history): Rename to ...
1535 (btrace_call_history): ...this. Use new btrace thread info
1536 fields and new iterator.
1537 (record_btrace_call_history, record_btrace_call_history_range):
1538 Use new btrace thread info fields and new iterator.
1540 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1542 * frame.h (frame_id_build_unavailable_stack_special): New.
1543 * frame.c (frame_id_build_unavailable_stack_special): New.
1545 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1547 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1548 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1549 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1551 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1552 (i386_insn_is_jump, i386_jmp_p): New.
1553 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1554 insn_is_jump to gdbarch.
1555 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1556 * gdbarch.h: Regenerated.
1557 * gdbarch.c: Regenerated.
1558 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1559 (default_insn_is_jump): New.
1560 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1561 (default_insn_is_jump): New.
1563 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1565 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1567 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1568 (btrace_read_type) <btrace_read_new>: Change to ...
1569 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1571 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1573 * common/linux-btrace.c (linux_read_btrace): Free trace from
1576 2014-01-15 Doug Evans <dje@google.com>
1578 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1581 2014-01-15 Tom Tromey <tromey@redhat.com>
1583 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1584 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1585 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1586 (set_objfile_main_name): New function.
1587 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1588 language_of_main>: New fields.
1589 (set_objfile_main_name): Declare.
1590 * symtab.c (find_main_name): Loop over objfiles to find the main
1592 (set_main_name): Now static.
1593 (get_main_info): Add comment.
1594 * symtab.h (set_main_name): Don't declare.
1596 2014-01-15 Tom Tromey <tromey@redhat.com>
1598 * symtab.c (main_progspace_key): New global.
1599 (struct main_info): New.
1600 (name_of_main, language_of_main): Remove.
1601 (get_main_info, main_info_cleanup): New function.
1602 (set_main_name, main_name, main_language): Use get_main_info.
1603 (_initialize_symtab): Initialize main_progspace_key.
1605 2014-01-15 Tom Tromey <tromey@redhat.com>
1607 * dbxread.c (process_one_symbol): Update.
1608 * dwarf2read.c (read_partial_die): Update.
1609 * symfile.c (set_initial_language): Call main_language.
1610 * symtab.c (language_of_main): Now static.
1611 (set_main_name): Add 'lang' parameter.
1612 (find_main_name): Update.
1613 (main_language): New function.
1614 (symtab_observer_executable_changed): Update.
1615 * symtab.h (set_main_name): Update.
1616 (language_of_main): Remove.
1617 (main_language): Declare.
1619 2014-01-15 Tom Tromey <tromey@redhat.com>
1621 * symfile.c (init_entry_point_info): Use new "initialized" field.
1623 * objfiles.h (struct entry_point) <initialized>: New field.
1624 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1625 (struct objfile) <ei>: ...here. Remove.
1626 * objfiles.c (entry_point_address_query): Update.
1628 2014-01-15 Tom Tromey <tromey@redhat.com>
1630 * objfiles.c (entry_point_address_query): Relocate entry point
1632 (objfile_relocate1): Do not relocate entry point address.
1633 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1634 <the_bfd_section_index>: New field.
1635 * symfile.c (init_entry_point_info): Find the entry point's
1638 2014-01-15 Tom Tromey <tromey@redhat.com>
1640 * solib-frv.c (enable_break): Use entry_point_address_query.
1642 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1644 * NEWS: Add note on improved process record-replay on
1645 arm*-linux* targets.
1647 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1649 * arm-tdep.c (enum arm_record_result): New enum.
1650 (arm_record_unsupported_insn): New function.
1651 (arm_record_coproc_data_proc): Removed.
1652 (thumb2_record_ld_st_multiple): New function.
1653 (thumb2_record_ld_st_dual_ex_tbb): New function.
1654 (thumb2_record_data_proc_sreg_mimm): New function.
1655 (thumb2_record_ps_dest_generic): New function.
1656 (thumb2_record_branch_misc_cntrl): New function.
1657 (thumb2_record_str_single_data): New function.
1658 (thumb2_record_ld_mem_hints): New function.
1659 (thumb2_record_ld_word): New function.
1660 (thumb2_record_lmul_lmla_div): New function.
1661 (thumb2_record_decode_insn_handler): New function.
1662 (decode_insn): Add thumb32 instruction handlers.
1664 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1666 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1667 (struct arm_linux_record_tdep): Declare.
1668 (arm_canonicalize_syscall): New function.
1669 (arm_all_but_pc_registers_record): New function.
1670 (arm_linux_syscall_record): New function.
1671 (arm_linux_init_abi): Add syscall recording constructs.
1672 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1673 decoding. (arm_record_coproc_data_proc): Update arm syscall
1675 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1676 <arm_syscall_record>: New field.
1677 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1680 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1682 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1683 register for push instruction recording.
1685 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1687 * arm-tdep.c (thumb_record_misc): Update to correct logical
1688 error while recording ldm, ldmia and pop instructions.
1690 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1692 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1694 2014-01-15 Pedro Alves <palves@redhat.com>
1696 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1697 (go32_resume, go32_fetch_registers, store_register)
1698 (go32_store_registers, go32_prepare_to_store)
1699 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1700 (go32_create_inferior, go32_can_run, go32_terminal_init)
1701 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1704 2014-01-15 Tom Tromey <tromey@redhat.com>
1706 * target.h (async_callback_ftype): New typedef.
1707 (struct target_ops) <to_async>: Use it.
1709 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1711 * python/py-value.c (get_field_type): Remove unnecessary curly
1712 braces for single-statement if block.
1714 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1716 * python/py-type.c (convert_field): Add missing empty line
1719 2014-01-14 Doug Evans <dje@google.com>
1721 * symfile.h (expand_symtabs_matching): Renamed from
1722 expand_partial_symbol_names. Update prototype.
1723 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1724 * symfile.c (expand_symtabs_matching): Renamed from
1725 expand_partial_symbol_names. New args file_matcher, kind.
1726 Rename arg fun to symbol_matcher.
1727 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1728 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1729 ada_expand_partial_symbol_name.
1730 (ada_make_symbol_completion_list): Update to call
1731 expand_symtabs_matching.
1732 (ada_add_global_exceptions): Call expand_symtabs_matching.
1733 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1734 call map_symbol_filenames.
1735 * symtab.c (sources_info): Update to call map_symbol_filenames.
1736 (search_symbols): Call expand_symtabs_matching.
1737 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1738 (default_make_symbol_completion_list_break_on): Update to call
1739 expand_symtabs_matching.
1740 (make_source_files_completion_list): Update to call
1741 map_symbol_filenames.
1743 2014-01-14 Doug Evans <dje@google.com>
1745 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1746 (expand_symtabs_symbol_matcher_ftype): New typedef.
1747 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1748 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1749 * symfile.c (expand_partial_symbol_names): Update to use
1750 expand_symtabs_symbol_matcher_ftype.
1751 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1752 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1753 Arg name_matcher renamed to symbol_matcher.
1754 * psymtab.c (recursively_search_psymtabs): Update to use
1755 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1757 (expand_symtabs_matching_via_partial): Update to use
1758 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1759 Arg name_matcher renamed to symbol_matcher.
1761 2014-01-14 Doug Evans <dje@google.com>
1763 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1764 (map_partial_symbol_filenames): Ditto.
1765 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1766 (map_partial_symbol_filenames): Ditto.
1767 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1768 (map_partial_symbol_filenames): Ditto.
1769 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1770 (map_partial_symbol_filenames): Ditto.
1771 * symtab.c: Delete #include "psymtab.h".
1773 2014-01-14 Pedro Alves <palves@redhat.com>
1774 Tom Tromey <tromey@redhat.com>
1776 * infrun.c (use_displaced_stepping): Use find_record_target
1777 instead of RECORD_IS_USED.
1778 (adjust_pc_after_break): Use record_full_is_used instead of
1780 * record-btrace.c (record_btrace_open): Call record_preopen
1781 instead of checking RECORD_IS_USED.
1782 * record-full.c (record_full_shortname)
1783 (record_full_core_shortname): New globals.
1784 (record_full_is_used): New function.
1785 (find_full_open): Call record_preopen instead of checking
1787 (init_record_full_ops): Set the target's shortname to
1788 record_full_shortname.
1789 (init_record_full_core_ops): Set the target's shortname to
1790 record_full_core_shortname.
1791 * record-full.h (record_full_is_used): Declare.
1792 * record.c (find_record_target): Make extern.
1793 (record_preopen): New function.
1794 * record.h (RECORD_IS_USED): Delete macro.
1795 (find_record_target, record_preopen): Declare functions.
1797 2014-01-14 Yao Qi <yao@codesourcery.com>
1799 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1800 'len''s type to ULONGEST.
1801 (core_xfer_shared_libraries_aix): Likewise.
1802 * gdbarch.c, gdbarch.h: Regenerated.
1803 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1804 Change type of 'len' to ULONGEST.
1805 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1806 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1808 2014-01-14 Yao Qi <yao@codesourcery.com>
1810 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1811 type of 'len' to ULONGEST.
1812 (linux_xfer_osdata_processgroups): Likewise.
1813 (linux_xfer_osdata_threads): Likewise.
1814 (linux_xfer_osdata_fds): Likewise.
1815 (linux_xfer_osdata_isockets): Likewise.
1816 (linux_xfer_osdata_shm): Likewise.
1817 (linux_xfer_osdata_sem): Likewise.
1818 (linux_xfer_osdata_msg): Likewise.
1819 (linux_common_xfer_osdata): Likewise.
1820 (struct osdata_type) <getter>: Likewise.
1821 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1824 2014-01-14 Yao Qi <yao@codesourcery.com>
1826 * target.h (target_xfer_partial_ftype): Update.
1827 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1829 * aix-thread.c (aix_thread_xfer_partial): Change type of
1830 argument 'len' to ULONGEST.
1831 * auxv.c (procfs_xfer_auxv): Likewise.
1832 (ld_so_xfer_auxv): Likewise.
1833 (memory_xfer_auxv): Likewise.
1834 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1835 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1836 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1837 * corelow.c (core_xfer_partial): Likewise.
1838 * ctf.c (ctf_xfer_partial): Likewise.
1839 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1841 (darwin_read_dyld_info): Likewise.
1842 (darwin_xfer_partial): Likewise.
1843 * exec.c (section_table_xfer_memory_partial): Likewise.
1844 (exec_xfer_partial): Likewise.
1845 * exec.h (section_table_xfer_memory_partial): Update
1847 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1848 instead of plongest.
1849 (gnu_xfer_partial): Likewise.
1850 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1851 (ia64_hpux_xfer_solib_got): Likewise.
1852 (ia64_hpux_xfer_partial): Likewise.
1853 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1854 * inf-ptrace.c (inf_ptrace_xfer_partial):
1855 * inf-ttrace.c (inf_ttrace_xfer_partial):
1856 * linux-nat.c (linux_xfer_siginfo): Likewise.
1857 (linux_nat_xfer_partial): Likewise.
1858 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1859 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1860 * monitor.c (monitor_xfer_memory): Likewise.
1861 (monitor_xfer_partial): Likewise.
1862 * procfs.c (procfs_xfer_partial): Likewise.
1863 * record-full.c (record_full_xfer_partial): Likewise.
1864 (record_full_core_xfer_partial): Likewise.
1865 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1866 instead of plongest.
1867 (gdbsim_xfer_partial): Likewise.
1868 * remote.c (remote_xfer_partial): Likewise.
1869 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1870 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1872 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1873 (rs6000_xfer_shared_libraries): Likewise.
1874 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1875 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1876 (sparc_xfer_partial): Likewise.
1877 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1878 (spu_xfer_partial): Likewise.
1879 * spu-multiarch.c (spu_xfer_partial): Likewise.
1880 * target.c (target_read_live_memory): Likewise.
1881 (memory_xfer_live_readonly_partial): Likewise.
1882 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1883 (target_xfer_partial, default_xfer_partial): Likewise.
1884 (current_xfer_partial): Likewise.
1885 * tracepoint.c (tfile_xfer_partial): Likewise.
1886 * windows-nat.c (windows_xfer_memory): Likewise. Call
1887 pulongest instead of plongest.
1888 (windows_xfer_partial): Likewise.
1889 (windows_xfer_shared_libraries): Likewise.
1891 2014-01-14 Yao Qi <yao@codesourcery.com>
1893 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1894 target_xfer_partial_ftype.
1896 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1900 * valops.c (value_struct_elt_bitpos): New function
1901 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1902 object to 'None' if the field name is an empty string ("").
1903 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1904 attribute to look for a field when 'name' is 'None'.
1905 (get_field_type): New function
1907 2014-01-13 Doug Evans <dje@google.com>
1910 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1911 (try_open_dwop_file): Ditto.
1912 * gdb_bfd.c: #include "vec.h".
1913 (bfdp): New typedef.
1914 (struct gdb_bfd_data): New member included_bfds.
1915 (gdb_bfd_unref): Unref all included bfds.
1916 (gdb_bfd_record_inclusion): New function.
1917 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1919 2014-01-13 Tom Tromey <tromey@redhat.com>
1921 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1923 2014-01-13 Tom Tromey <tromey@redhat.com>
1925 * defs.h (use_windows): Remove.
1926 * gdb.c (main): Update.
1927 * main.c (captured_main, gdb_main): Update.
1928 * main.h (struct captured_main_args) <use_windows>: Remove.
1929 * top.c (use_windows): Remove.
1931 2014-01-13 Tom Tromey <tromey@redhat.com>
1933 * defs.h (deprecated_flush_hook): Remove.
1935 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1938 * linux-thread-db.c (try_thread_db_load): Add parameter
1939 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1940 (try_thread_db_load_from_pdir_1): Move it there from here.
1941 (try_thread_db_load_from_sdir): Update caller.
1942 (try_thread_db_load_from_dir): Move it there from here.
1944 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1946 * regformats/regdat.sh: Always rewrite the register file.
1948 2014-01-13 Pedro Alves <palves@redhat.com>
1950 * Makefile.in (CHECK_HEADERS): New variable.
1951 (check-headers:): New rule.
1953 2014-01-13 Tom Tromey <tromey@redhat.com>
1955 * cli/cli-setshow.c (do_set_command): Update.
1956 * defs.h (deprecated_set_hook): Remove.
1957 * top.c (deprecated_set_hook): Remove.
1959 2014-01-13 Pedro Alves <palves@redhat.com>
1961 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1962 the tracepoint if the PC is a pseudo-register.
1964 2014-01-13 Tom Tromey <tromey@redhat.com>
1966 * defs.h (XCALLOC): Remove.
1967 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1968 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1969 * dwarf2loc.c (allocate_piece_closure): Likewise.
1970 * elfread.c (elf_symfile_segments): Likewise.
1971 (elf_symfile_segments): Likewise.
1972 * gdbtypes.c (copy_type_recursive): Likewise.
1973 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1974 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1975 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1977 * mt-tdep.c (mt_gdbarch_init): Likewise.
1978 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1980 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1981 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1982 * registry.c (registry_alloc_data): Likewise.
1983 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1984 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1985 * serial.c (serial_fdopen_ops): Likewise.
1986 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1988 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1989 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1992 2014-01-13 Tom Tromey <tromey@redhat.com>
1994 * defs.h (XMALLOC): Remove.
1995 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1996 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1997 * cli-out.c (struct ui_out *): Likewise.
1998 * cli/cli-dump.c (add_dump_command): Likewise.
1999 (add_dump_command): Likewise.
2000 * complaints.c (get_complaints): Likewise.
2001 (find_complaint): Likewise.
2002 * dwarf2-frame.c (execute_cfa_program): Likewise.
2003 * dwarf2read.c (abbrev_table_read_table): Likewise.
2004 * gdbarch.sh: Likewise.
2005 * gdbarch.c: Rebuild.
2006 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
2007 * interps.c (interp_new): Likewise.
2008 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
2009 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2010 * mi/mi-console.c (mi_console_file_new): Likewise.
2011 * mi/mi-interp.c (mi_interpreter_init): Likewise.
2012 * mi/mi-out.c (mi_out_new): Likewise.
2013 * mi/mi-parse.c (mi_parse): Likewise.
2014 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
2015 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
2016 * observer.c (xalloc_observer_list_node): Likewise.
2017 * regcache.c (regcache_xmalloc_1): Likewise.
2018 * reggroups.c (reggroup_new): Likewise.
2019 (_initialize_reggroup): Likewise.
2020 * registry.c (register_data_with_cleanup): Likewise.
2021 * remote.c (remote_notif_stop_alloc_reply): Likewise.
2022 * ser-base.c (serial_ttystate): Likewise.
2023 * ser-mingw.c (make_pipe_state): Likewise.
2024 * ser-pipe.c (pipe_open): Likewise.
2025 * serial.c (serial_open): Likewise.
2026 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2027 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
2028 (tui_alloc_win_info): Likewise.
2029 (tui_add_content_elements): Likewise.
2030 * tui/tui-file.c (tui_file_new): Likewise.
2031 * tui/tui-out.c (tui_out_new): Likewise.
2032 * ui-file.c (mem_file_new): Likewise.
2033 * ui-out.c (push_level): Likewise.
2034 (make_cleanup_ui_out_end): Likewise.
2035 (append_header_to_list): Likewise.
2036 (ui_out_new): Likewise.
2037 * user-regs.c (user_reg_add_builtin): Likewise.
2039 2014-01-13 Tom Tromey <tromey@redhat.com>
2041 * defs.h (XZALLOC): Remove.
2042 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
2043 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
2044 (get_ada_tasks_inferior_data): Likewise.
2045 * auto-load.c (get_auto_load_pspace_data): Likewise.
2046 * auxv.c (get_auxv_inferior_data): Likewise.
2047 * bfd-target.c (target_bfd_reopen): Likewise.
2048 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
2049 (deprecated_insert_raw_breakpoint): Likewise.
2050 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
2051 * corelow.c (core_open): Likewise.
2052 * darwin-nat.c (darwin_check_new_threads): Likewise.
2053 (darwin_attach_pid): Likewise.
2054 * dummy-frame.c (dummy_frame_push): Likewise.
2055 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
2056 * dwarf2loc.c (allocate_piece_closure): Likewise.
2057 * elfread.c (elf_symfile_segments): Likewise.
2058 * eval.c (ptrmath_type_p): Likewise.
2059 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
2060 * gdbtypes.c (alloc_type_arch): Likewise.
2061 (alloc_type_instance): Likewise.
2062 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
2063 * inf-child.c (inf_child_can_use_agent): Likewise.
2064 * inflow.c (get_inflow_inferior_data): Likewise.
2065 * infrun.c (save_infcall_suspend_state): Likewise.
2066 * jit.c (jit_reader_load): Likewise.
2067 (get_jit_objfile_data): Likewise.
2068 (get_jit_program_space_data): Likewise.
2069 (jit_object_open_impl): Likewise.
2070 (jit_symtab_open_impl): Likewise.
2071 (jit_block_open_impl): Likewise.
2072 (jit_frame_sniffer): Likewise.
2073 * linux-fork.c (add_fork): Likewise.
2074 * maint.c (make_command_stats_cleanup): Likewise.
2075 * objfiles.c (get_objfile_pspace_data): Likewise.
2076 * opencl-lang.c (struct lval_closure): Likewise.
2077 * osdata.c (osdata_start_osdata): Likewise.
2078 * progspace.c (new_address_space): Likewise.
2079 (add_program_space): Likewise.
2080 * remote-sim.c (get_sim_inferior_data): Likewise.
2081 * sh-tdep.c (sh_gdbarch_init): Likewise.
2082 * skip.c (Ignore): Likewise.
2083 (skip_delete_command): Likewise.
2084 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
2085 (library_list_start_library): Likewise.
2086 (solib_aix_current_sos): Likewise.
2087 * solib-darwin.c (get_darwin_info): Likewise.
2088 (darwin_current_sos): Likewise.
2089 * solib-dsbt.c (get_dsbt_info): Likewise.
2090 * solib-ia64-hpux.c (new_so_list): Likewise.
2091 (ia64_hpux_get_solib_linkage_addr): Likewise.
2092 * solib-spu.c (append_ocl_sos): Likewise.
2093 (spu_current_sos): Likewise.
2094 * solib-svr4.c (get_svr4_info): Likewise.
2095 (svr4_keep_data_in_core): Likewise.
2096 (library_list_start_library): Likewise.
2097 (svr4_default_sos): Likewise.
2098 (svr4_read_so_list): Likewise.
2099 * solib-target.c (library_list_start_library): Likewise.
2100 (solib_target_current_sos): Likewise.
2101 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
2102 * symfile-debug.c (install_symfile_debug_logging): Likewise.
2103 * symfile.c (default_symfile_segments): Likewise.
2104 * target-descriptions.c (tdesc_data_init): Likewise.
2105 (tdesc_create_reg): Likewise.
2106 (struct tdesc_type *): Likewise.
2107 (tdesc_create_vector): Likewise.
2108 (tdesc_set_struct_size): Likewise.
2109 (struct tdesc_type *): Likewise.
2110 (tdesc_free_feature): Likewise.
2111 (tdesc_create_feature): Likewise.
2112 * windows-nat.c (windows_add_thread): Likewise.
2113 (windows_make_so): Likewise.
2114 * xml-support.c (gdb_xml_body_text): Likewise.
2115 (gdb_xml_create_parser_and_cleanup): Likewise.
2116 (xml_process_xincludes): Likewise.
2117 * xml-syscall.c (allocate_syscalls_info): Likewise.
2118 (syscall_create_syscall_desc): Likewise.
2120 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
2122 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
2123 function, with code from i386_stap_parse_special_token.
2124 (i386_stap_parse_special_token_three_arg_disp): Likewise.
2125 (i386_stap_parse_special_token): Move code to the two functions
2128 2014-01-09 Pedro Alves <palves@redhat.com>
2129 Hui Zhu <hui@codesourcery.com>
2132 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2133 bp_err_string. Don't mark the location shlib_disabled if the
2134 error thrown wasn't a generic or memory error. Catch errors
2135 thrown while inserting breakpoints in overlayed code. Output
2136 error message of software breakpoints.
2137 * remote.c (remote_insert_breakpoint): If this breakpoint has
2138 target-side commands but this stub doesn't support Z0 packets,
2139 throw NOT_SUPPORTED_ERROR error.
2140 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2141 * target.h (target_insert_breakpoint): Extend comment.
2142 (target_insert_hw_breakpoint): Add comment.
2144 2014-01-08 Pedro Alves <palves@redhat.com>
2146 * remote.c (remote_add_thread): Add threads silently if starting
2148 (remote_notice_new_inferior): If in all-stop, and starting up,
2149 don't call notice_new_inferior.
2150 (get_current_thread): New function, factored out from ...
2151 (add_current_inferior_and_thread): ... this. Adjust.
2152 (remote_start_remote) <all-stop>: Fetch the thread list. If we
2153 found any thread, then select the remote's current thread as GDB's
2156 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2158 * NEWS: Create a new section for the next release branch.
2159 Rename the section of the current branch, now that it has
2162 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2164 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2165 * version.in: Bump version to 7.7.50.DATE-cvs.
2167 2014-01-08 Yao Qi <yao@codesourcery.com>
2169 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2170 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2171 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2173 2014-01-08 Yao Qi <yao@codesourcery.com>
2175 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2176 return value of bfd_get_filename to symbol_file_add_from_bfd.
2178 2014-01-08 Pierre Muller <muller@sourceware.org>
2181 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2182 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2183 to prim_record_mininal_symbol_and_info.
2184 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2185 in call to prim_record_minimal_symbol_and_info.
2186 (read_pe_exported_syms): Set index field of section_data.
2188 2014-01-07 Andrew Pinski <apinski@cavium.com>
2190 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2191 * features/aarch64.c: Regenerate.
2193 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2195 * target.c (return_null): Define.
2196 (update_current_target): Use it instead of return_zero for
2197 functions that return a pointer.
2199 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2201 * source.c (add_path): Fix check for duplicated paths in the previously
2204 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2206 * ada-lang.c: Remove duplicated include statements.
2207 * alphabsd-nat.c: Ditto.
2208 * amd64-darwin-tdep.c: Ditto.
2209 * amd64fbsd-nat.c: Ditto.
2210 * auto-load.c: Ditto.
2212 * breakpoint.c: Ditto.
2214 * fork-child.c: Ditto.
2215 * gdb_usleep.c: Ditto.
2216 * i386-darwin-tdep.c: Ditto.
2217 * i386fbsd-nat.c: Ditto.
2219 * inferior.c: Ditto.
2221 * linux-nat.c: Ditto.
2222 * linux-tdep.c: Ditto.
2223 * m68kbsd-nat.c: Ditto.
2224 * m68klinux-nat.c: Ditto.
2225 * microblaze-tdep.c: Ditto.
2226 * mips-linux-tdep.c: Ditto.
2227 * mn10300-tdep.c: Ditto.
2228 * nto-tdep.c: Ditto.
2229 * opencl-lang.c: Ditto.
2231 * printcmd.c: Ditto.
2232 * regcache.c: Ditto.
2233 * remote-m32r-sdi.c: Ditto.
2237 * tilegx-linux-nat.c: Ditto.
2238 * tilegx-tdep.c: Ditto.
2239 * tracepoint.c: Ditto.
2241 * vaxbsd-nat.c: Ditto.
2242 * windows-nat.c: Ditto.
2243 * xtensa-tdep.c: Ditto.
2245 2014-01-07 Yao Qi <yao@codesourcery.com>
2247 * spu-linux-nat.c (_initialize_spu_nat): Declare.
2249 2014-01-07 Yao Qi <yao@codesourcery.com>
2250 Joel Brobecker <brobecker@adacore.com>
2252 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2253 (pdc_write_regs): Likewise.
2254 (fetch_regs_kernel_thread): Likewise.
2255 (store_regs_kernel_thread): Likewise.
2257 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2259 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2260 tagged type objects to their actual type.
2262 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2264 * ada-valprint.c (print_field_values): Add "language" parameter.
2265 Update calls to print_field_values and print_variant_part.
2266 Pass new parameter "language" in call to val_print instead
2267 of "current_language". Replace call to ada_val_print by call
2269 (print_variant_part): Add "language" parameter.
2270 (ada_val_print_struct_union): Update call to print_field_values.
2272 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2274 * ada-valprint.c (ui_memcpy): Delete.
2275 (ada_print_floating): Update documentation. Add empty line
2276 between between function documentation and implementation.
2277 Delete variable "buffer". Use ui_file_xstrdup in place of
2278 ui_file_put. Minor adjustments following this change.
2280 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2282 * ada-valprint.c (ada_val_print_string): New function,
2283 extracted from ada_val_print_array.
2284 (ada_val_print_array): Replace extracted code by call
2285 to ada_val_print_string followed by a return. Move
2286 "else" branch to the function's top block.
2288 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2290 * ada-valprint.c (ada_val_print_array): Move implementation
2291 down. Rename parameter "offset" and "val" into "offset_aligned"
2292 and "original_value" respectively. Add parameter "offset".
2294 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2296 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2297 re-organizing the code. Change the "???" message printed
2298 when target type is a TYPE_CODE_UNDEF into
2299 "<ref to undefined type>".
2301 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2303 * ada-valprint.c (print_record): Delete, implementation inlined...
2304 (ada_val_print_struct_union): ... here. Remove call to
2305 ada_check_typedef in inlined implementation.
2307 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2309 * ada-valprint.c (ada_val_print_gnat_array): New function,
2310 extracted from ada_val_print_1;
2311 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2312 (ada_val_print_flt, ada_val_print_struct_union)
2313 (ada_val_print_ref): Likewise.
2314 (ada_val_print_1): Delete variables i and elttype.
2315 Replace extracted-out code by call to corresponding
2318 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2320 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2322 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2324 * ada-valprint.c (ada_val_print_1): Replace calls to
2325 ada_val_print_1 by calls to val_print.
2327 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2329 * ada-valprint.c (ada_val_print_1): Add parameter "language".
2330 Update calls to self accordingly. Replace calls to c_val_print
2331 by calls to val_print.
2333 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2335 * ada-valprint.c (print_record): Delete declaration.
2336 (adjust_type_signedness, ada_val_print_1): Likewise.
2337 (ada_val_print): Move function implementation down.
2338 (print_variant_part, print_field_values, print_record):
2339 Move function implementation up.
2341 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2343 * python/py-type.c (typy_get_name): New function.
2344 (type_object_getset): Add entry for attribute "name".
2345 * NEWS: Add entry mentioning this new attribute.
2347 2014-01-07 Yao Qi <yao@codesourcery.com>
2349 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2352 2014-01-07 Yao Qi <yao@codesourcery.com>
2354 * gnu-nat.c (info_port_rights): Add qualifier const to
2357 2014-01-07 Yao Qi <yao@codesourcery.com>
2359 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2361 2014-01-07 Yao Qi <yao@codesourcery.com>
2363 * gnu-nat.c (make_inf) Update declaration.
2364 (make_inf): Make it static.
2365 (inf_set_traced): Likewise.
2366 (inf_port_to_thread, inf_task_died_status): Likewise.
2368 2014-01-07 Yao Qi <yao@codesourcery.com>
2370 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2372 2014-01-07 Yao Qi <yao@codesourcery.com>
2374 * gnu-nat.c (_initialize_gnu_nat): Declare.
2376 2014-01-07 Yao Qi <yao@codesourcery.com>
2378 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2380 (struct gdbarch_info) <byte_order>: Change type to
2382 <byte_order_for_code>: Likewise.
2383 * gdbarch.c, gdbarch.h: Regenerated.
2385 2014-01-06 Sasha Smundak <asmundak@google.com>
2387 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2389 2014-01-06 Tom Tromey <tromey@redhat.com>
2391 * doublest.c (convert_doublest_to_floatformat): Use const, not
2393 * somread.c (som_symtab_read): Likewise.
2395 2014-01-07 Hui Zhu <hui@codesourcery.com>
2397 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2398 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2399 (gdb_bfd_fopen): Ditto.
2400 (gdb_bfd_openr): Ditto.
2401 (gdb_bfd_openw): Ditto.
2402 (gdb_bfd_openr_iovec): Ditto.
2403 (gdb_bfd_fdopenr): Ditto.
2404 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2405 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2407 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2409 * symfile-mem.c (symbol_file_add_from_memory): Removed
2410 gdb_bfd_stash_filename.
2412 2014-01-03 Doug Evans <dje@google.com>
2414 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2417 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2419 Update year range in copyright notice of all files.
2421 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2423 * top.c (print_gdb_version): Set copyright year to 2014.
2425 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2427 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2429 For older changes see ChangeLog-2013.
2435 version-control: never