1 2010-08-10 Tom Tromey <tromey@redhat.com>
3 Revert gdb-add-index addition:
4 * Makefile.in (install-only): Don't install gdb-add-index.
5 * gdb-add-index.sh: Remove.
7 2010-08-09 Kevin Buettner <kevinb@redhat.com>
9 * remote-sim.c (gdbsim_xfer_inferior_memory): Replace
10 `target_has_execution' check with `to_has_memory' check.
11 (gdbsim_has_all_memory, gdbsim_has_memory): New functions.
12 (init_gdbsym_ops): Initialize relevant fields of `gdbsim_ops'
13 with `gdbsim_has_all_memory' and `gdbsim_has_memory'.
15 2010-08-09 Kevin Buettner <kevinb@redhat.com>
17 * remote-sim.c (program_loaded, gdbsim_desc, remote_sim_ptid)
18 (resume_siggnal, resume_step): Move these static globals...
19 (struct sim_inferior_data): ...into this new struct.
20 (sim_inferior_data_key, next_pid, sim_argv, gdbsim_is_open):
22 (gdb_callback, callbacks_initialized): Move these globals to
23 a point earlier in the file.
24 (check_for_duplicate_sim_descriptor, get_sim_inferior_data)
25 (get_sim_inferior_data_by_ptid, sim_inferior_data_cleanup)
26 (gdbsim_close_inferior, gdbsim_resume_inferior)
27 (gdbsim_stop_inferior): New functions.
28 (SIM_INSTANCE_NOT_NEEDED, SIM_INSTANCE_NEEDED, INITIAL_PID):
30 (gdbsim_fetch_register, gdbsim_store_register, gdbsim_load)
31 (gdbsim_create_inferior, gdbsim_open, gdbsim_close, gdbsim_resume)
32 (gdbsim_stop, gdbsim_cntrl_c, gdbsim_wait)
33 (gdbsim_xfer_inferior_memory, gdbsim_files_info)
34 (gdbsim_mourn_inferior, simulator_command, gdbsim_thread_alive,
35 (gdbsim_pid_to_str): Invoke `get_sim_inferior_data' to set
36 new local variable `sim_data' in each of these functions. Use
37 `sim_data' to reference former globals `program_loaded',
38 `gdbsim_desc', `remote_sim_ptid', `resume_siggnal', and
40 (gdbsim_open): Remove local variable `argv'. Put results of call
41 to `gdb_buildargv' in `sim_argv' rather than in `argv'. Don't
42 make a cleanup for it. Free it though when a sim instance cannot
44 (gdbsim_close): Free sim_argv and null it out as appropriate.
45 Close sim instances in all inferiors.
46 (gdbsim_cntrl_c): Stop all inferiors.
48 (_initialize_remote_sim): Initialize `sim_inferior_data_key'.
50 2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
52 * dwarf2read.c (new_symbol): Add symbol to variable list at end of
53 function after symbol construction is complete.
54 Do the same for template symbol addition to template_symbols list.
56 2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
58 * symtab.c (symbol_get_demangled_name): Remove assertion and
59 return NULL when language_specific.cplus_specific is not initialized.
60 * stabsread.c (define_symbol): Set the name before calling
61 cp_scan_for_anonymous_namespaces.
63 2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
65 * symtab.h: Renamed SYMBOL_INIT_LANGUAGE_SPECIFIC to
67 (symbol_init_language_specific): Renamed to symbol_set_language.
68 * symtab.c (symbol_init_language_specific): Removed redundant check
70 Renamed to symbol_set_language.
71 * stabsread.c (define_symbol): Updated.
72 (read_enum_type): Updated
73 * psymtab.c (add_psymbol_to_bcache): Updated.
74 * minsyms.c (install_minimal_symbols): Updated.
75 * coffread.c (process_coff_symbol): SYMBOL_SET_LANGUAGE instead of
76 SYMBOL_LANGUAGE to set the language.
77 * minsyms.c (prim_record_minimal_symbol_full): Ditto.
78 * mdebugread.c (new_symbol): Ditto.
79 * cp-namespace.c (check_one_possible_namespace_symbol): Ditto.
80 * dwarf2read.c (new_symbol_full): Ditto.
81 * jv-lang.c (add_class_symbol): Ditto.
83 2010-08-07 Jan Kratochvil <jan.kratochvil@redhat.com>
85 * defs.h (make_cleanup_restore_uinteger, make_cleanup_restore_ui_file)
86 (make_cleanup_restore_page_info)
87 (set_batch_flag_and_make_cleanup_restore_page_info): New declarations.
88 * gdbcmd.h (execute_command_to_string): New declaration.
89 * python/python.c (struct restore_ui_file_closure, restore_ui_file)
90 (make_cleanup_restore_ui_file): Move to utils.c
91 (execute_gdb_command) <to_string>: Move ...
92 * top.c (execute_command_to_string): ... here. Call
93 set_batch_flag_and_make_cleanup_restore_page_info.
94 * utils.c (make_cleanup_restore_integer): New source file blank line.
95 (make_cleanup_restore_uinteger): New.
96 (struct restore_ui_file_closure, do_restore_ui_file)
97 (make_cleanup_restore_ui_file): Move here from python/python.c.
98 (init_page_info) <batch_flag>
99 (do_restore_page_info_cleanup, make_cleanup_restore_page_info)
100 (set_batch_flag_and_make_cleanup_restore_page_info): New.
102 2010-08-06 Maciej W. Rozycki <macro@codesourcery.com>
104 * thread.c (add_thread_silent): Use null_ptid instead of
105 minus_one_ptid while getting rid of stale inferior_ptid.
107 2010-08-06 Corinna Vinschen <vinschen@redhat.com>
109 * dwarf2-frame.c (struct dwarf2_cie): Add ptr_size member.
110 Throughout, call read_encoded_value with ptr_size rather than addr_size.
111 (decode_frame_entry_1): Remove redundant setting of
112 addr_size. Call gdbarch_dwarf2_addr_size rather than gdbarch_ptr_bit
113 to determine addr_size in Dwarf versions < 4. Set ptr_size dependent
114 on examined frame section. Add comment to explain why.
115 * gdbarch.sh (dwarf2_addr_size): Define as variable. Add lengthy
116 comment to explain usage.
117 * gdbarch.c: Regenerate.
118 * gdbarch.h: Regenerate.
120 * xstormy16-tdep.c (xstormy16_gdbarch_init): Set dwarf2_addr_size to 4.
122 2010-08-06 Jan Kratochvil <jan.kratochvil@redhat.com>
125 * varobj.c (varobj_create): Move variables fi, old_fi and block to
128 2010-08-05 Pedro Alves <pedro@codesourcery.com>
130 * configure.tgt (alpha*-*-linux*, am33_2.0*-*-linux*, frv-*-*)
131 (hppa*-*-linux*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*)
132 (microblaze*-linux-*, mips*-*-linux*, sh*-*-linux*)
133 (sparc-*-linux*, sparc64-*-linux*, xtensa*-*-linux*): Add
134 linux-tdep.o to gdb_target_obs.
136 2010-08-05 Marc Khouzam <marc.khouzam@ericsson.com>
138 * mi/mi-main.c (mi_cmd_remove_inferior): Properly access first
141 2010-08-05 Hui Zhu <teawater@gmail.com>
143 * mips-linux-tdep.c(regset.h): New include.
144 (mips_supply_gregset_wrapper, mips_fill_gregset_wrapper,
145 mips_supply_fpregset_wrapper, mips_fill_fpregset_wrapper,
146 mips64_supply_gregset_wrapper, mips64_fill_gregset_wrapper,
147 mips64_supply_fpregset_wrapper, mips64_fill_fpregset_wrapper,
148 mips_linux_regset_from_core_section): New functions.
149 (fetch_core_registers, regset_core_fns): Deleted.
150 (mips_linux_init_abi): Add mips_linux_regset_from_core_section.
151 Deleted regset_core_fns.
152 * mips-tdep.c(mips_gdbarch_init): Initialize tdep->gregset,
153 tdep->gregset64, tdep->fpregset and tdep->fpregset64.
154 * mips-tdep.h(gdbarch_tdep): Add gregset, gregset64, fpregset
157 2010-08-04 Pedro Alves <pedro@codesourcery.com>
159 * s390-tdep.c: Include linux-tdep.h.
160 (s390_gdbarch_init): Call linux_init_abi.
162 2010-08-04 Pedro Alves <pedro@codesourcery.com>
164 * corelow.c (core_pid_to_str): Default to using normal_pid_to_str
165 instead of printing "Thread" here.
166 * linux-tdep.c: Include inferior.h.
167 (linux_core_pid_to_str): New.
168 (linux_init_abi): New.
169 * linux-tdep.h (linux_init_abi): Declare.
170 * alpha-linux-tdep.c: Include linux-tdep.h.
171 (alpha_linux_init_abi): Call linux_init_abi.
172 * amd64-linux-tdep.c (amd64_linux_init_abi): Call linux_init_abi.
173 * arm-linux-tdep.c (arm_linux_init_abi): Call linux_init_abi.
174 * frv-linux-tdep.c: Include linux-tdep.h
175 (frv_linux_init_abi): Call linux_init_abi.
176 * hppa-linux-tdep.c: Include linux-tdep.h
177 (hppa_linux_init_abi): Call linux_init_abi.
178 * i386-linux-tdep.c (i386_linux_init_abi): Call linux_init_abi.
179 * ia64-linux-tdep.c: Include linux-tdep.h.
180 (ia64_linux_init_abi): Call linux_init_abi.
181 * m32r-linux-tdep.c: Include linux-tdep.h.
182 (m32r_linux_init_abi): Call linux_init_abi.
183 * m68klinux-tdep.c: Include linux-tdep.h.
184 (m68k_linux_init_abi): Call linux_init_abi.
185 * microblaze-linux-tdep.c: Include linux-tdep.h.
186 (microblaze_linux_init_abi): Call linux_init_abi.
187 * mips-linux-tdep.c: Include linux-tdep.h.
188 (mips_linux_init_abi): Call linux_init_abi.
189 * mn10300-linux-tdep.c: Include linux-tdep.h.
190 (am33_linux_init_osabi): Call linux_init_abi. Rename the
191 'gdbinfo' parameter to 'info'.
192 * ppc-linux-tdep.c: Include linux-tdep.h.
193 (ppc_linux_init_abi): Call linux_init_abi.
194 * sh-linux-tdep.c: Include linux-tdep.h.
195 (sh_linux_init_abi): Call linux_init_abi.
196 * sparc-linux-tdep.c: Include linux-tdep.h.
197 (sparc32_linux_init_abi): Call linux_init_abi.
198 * sparc64-linux-tdep.c: Include linux-tdep.h.
199 (sparc64_linux_init_abi): Call linux_init_abi.
200 * xtensa-linux-tdep.c: Include linux-tdep.h.
201 (xtensa_linux_init_abi): Call linux_init_abi.
202 * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): New.
203 (i386_cygwin_init_abi): Install it as gdbarch_core_pid_to_str
206 2010-08-03 Doug Evans <dje@google.com>
208 * breakpoint.c (bpdisp_text): Constify bpdisps.
209 * solib-svr4.c (solib_break_names): Constify.
210 (bkpt_names, main_name_list): Constify.
211 (match_main): Constify soname arg.
212 (bfd_lookup_symbol): Remove unnecessary forward decl.
213 Constify symname arg.
214 (enable_break): Constify bkpt_namep.
215 * symtab.c (search_symbols): Constify types, types2, types3, types4.
216 (symtab_symbol_info): Constify classnames.
218 2010-08-03 Phil Muldoon <pmuldoon@redhat.com>
220 * NEWS: Document Python value inferior function calls.
222 2010-08-02 Doug Evans <dje@google.com>
224 * dwarf2read.c (dwarf_attr_name): Add DW_AT_GNU_odr_signature.
226 2010-07-31 Paul Pluzhnikov <ppluzhnikov@google.com>
228 * linux-thread-db.c (libthread_db_debug): New variable.
229 (thread_db_find_new_threads_silently): Control verbosity with it.
230 (try_thread_db_load_1, try_thread_db_load): Likewise.
231 (find_new_threads_once): Likewise.
232 (_initialize_thread_db): Set/show it.
234 2010-07-31 Jan Kratochvil <jan.kratochvil@redhat.com>
236 * common/signals.c (signals): Move the content to signals.def.
237 Include it. Remove the INDENT comments.
239 2010-07-30 Tom Tromey <tromey@redhat.com>
241 * Makefile.in (install-only): Install gdb-add-index.
242 * gdb-add-index.sh: New file.
244 2010-07-31 Renquan Cheng <crq@gcc.gnu.org>
246 * MAINTAINERS: Add myself for write after approval privileges.
248 2010-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
250 * symfile.c (addr_section_name): New function.
251 (addrs_section_compar): Use it.
252 (addr_info_make_relative): Use it. Move variable sect_name into a more
253 inner block. Make ".dynbss" and ".sdynbss" checks more strict.
255 2010-07-30 Tom Tromey <tromey@redhat.com>
257 * configure: Rebuild.
258 * configure.ac: Add missing case for Python 2.7.
260 2010-07-29 DJ Delorie <dj@redhat.com>
262 * rx-tdep.c (rx_analyze_prologue): Don't require branches to have
265 2010-07-29 Pedro Alves <pedro@codesourcery.com>
267 * PROBLEMS: Remove mention of all problems.
269 2010-07-28 Pedro Alves <pedro@codesourcery.com>
272 * configure.ac: Check for wresize.
273 * configure, config.in: Regenerate.
274 * tui/tui-win.c (make_visible_with_new_height): Wrap wresize call
277 2010-07-28 Tom Tromey <tromey@redhat.com>
280 * python/py-type.c (typy_legacy_template_argument): New function,
281 extracted from typy_template_argument.
282 (typy_template_argument): Use TYPE_TEMPLATE_ARGUMENT. Return a
285 2010-07-28 Oleg Nesterov <oleg@redhat.com>
287 * remote.c (readchar): Call pop_target in case of SERIAL_ERROR.
289 2010-07-27 Tom Tromey <tromey@redhat.com>
291 * dwarf2read.c (dwarf2_const_value_data): Never sign extend.
293 2010-07-28 Daniel Jacobowitz <dan@codesourcery.com>
295 * dwarf2read.c (read_subroutine_type): Improve THIS detection,
296 handling DW_AT_object_pointer, and workaround GCC PR 43053.
298 2010-07-28 Tom Tromey <tromey@redhat.com>
300 * Makefile.in (HFILES_NO_SRCDIR): Remove link-warning.h.
302 2010-07-28 Joel Brobecker <brobecker@adacore.com>
304 * remote.c (remote_download_tracepoint): Add missing gettext markup.
305 * tracepoint.c (parse_static_tracepoint_marker_definition): Likewise.
307 2010-07-28 Joel Brobecker <brobecker@adacore.com>
309 * breakpoint.c (breakpoint_re_set_one): Move call to set_language
310 down, just before the block that parse the breakpoint addr_string.
312 2010-07-28 Tom Tromey <tromey@redhat.com>
315 * symfile.c (reread_symbols): Clear template_symbols.
316 * symtab.h (struct symbol) <is_cplus_template_function>: New
318 (SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION): New macro.
319 (struct template_symbol): New.
320 * symtab.c (lookup_symbol_aux_local): Use
321 cp_lookup_symbol_imports_or_template.
322 * objfiles.h (struct objfile) <template_symbols>: New field.
323 * objfiles.c (relocate_one_symbol): New function.
324 (objfile_relocate1): Use it. Relocate isolated symbols.
325 * gdbtypes.h (struct cplus_struct_type) <n_template_arguments,
326 template_arguments>: New fields.
327 (TYPE_N_TEMPLATE_ARGUMENTS): New macro.
328 (TYPE_TEMPLATE_ARGUMENTS): Likewise.
329 (TYPE_TEMPLATE_ARGUMENT): Likewise.
330 (lookup_typename): Update.
331 * gdbtypes.c (lookup_typename): Constify "block" argument.
332 * dwarf2read.c: Include vec.h.
333 (symbolp): New typedef.
334 (read_func_scope): Read template arguments. Allocate a
335 template_symbol when needed.
336 (read_structure_type): Read template arguments.
337 (new_symbol_full): New function, from new_symbol. Handle
338 DW_TAG_template_type_param and DW_TAG_template_value_param.
339 (new_symbol): Rewrite as wrapper.
340 * cp-support.h (cp_lookup_symbol_imports_or_template): Declare.
341 * cp-namespace.c: Include language.h.
342 (search_symbol_list): New function.
343 (cp_lookup_symbol_imports_or_template): Likewise.
345 2010-07-28 Balazs Kezes <rlblaster@gmail.com>
347 * tui/tui-win.c (make_visible_with_new_height): Resize and move
348 the command window to the new size and position.
350 2010-07-28 Balazs Kezes <rlblaster@gmail.com>
352 * tui/tui-win.c (tui_resize_all): Update the locator's origin's
355 2010-07-28 Balazs Kezes <rlblaster@gmail.com>
357 * tui/tui-io.c (tui_handle_resize_during_io): Call tui_resize_all
358 after a detecting a resize.
359 * tui/tui-win.c (tui_resize_all): Remove tui_set_win_resized_to
362 2010-07-28 Pedro Alves <pedro@codesourcery.com>
364 * configure.ac: Check for resize_term.
365 * configure, config.in: Regenerate.
367 2010-07-27 Joel Brobecker <brobecker@adacore.com>
369 * MAINTAINERS (Write After Approval): Reorder a couple of entries.
371 2010-07-27 Daniel Jacobowitz <dan@codesourcery.com>
373 * dwarf2read.c (read_string): Rename to ...
374 (read_direct_string): ... this.
375 (skip_one_die, read_attribute_value, dwarf_decode_line_header)
376 (dwarf_decode_lines, dwarf_decode_macros): Adjust.
378 2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
380 * linux-nat.c (linux_nat_lp_status_is_event): New function.
381 (count_events_callback, select_event_lwp_callback)
382 (cancel_breakpoints_callback, linux_nat_wait_1): Use it.
384 2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
386 * ia64-linux-nat.c (ia64_linux_status_is_event): New function.
387 (_initialize_ia64_linux_nat): Install it.
388 * linux-nat.c (sigtrap_is_event, linux_nat_status_is_event)
389 (linux_nat_set_status_is_event): New.
390 (stop_wait_callback, count_events_callback, select_event_lwp_callback)
391 cancel_breakpoints_callback, linux_nat_filter_event)
392 (linux_nat_wait_1): Use linux_nat_status_is_event.
393 * linux-nat.h (linux_nat_set_status_is_event): New prototype.
395 2010-07-27 Tom Tromey <tromey@redhat.com>
397 * NEWS: Mention labels, .gdb_index.
399 2010-07-28 CHENG Renquan <rqcheng@smu.edu.sg>
401 * cli/cli-cmds.c (disassemble_command): Add support of disassemble
402 "start,+length" form of arguments.
403 * NEWS: Add "Changed commands" (disassemble) section for "Changes
404 since GDB 7.1"; and merge two separated paragraphs of disassemble
405 description in "Changes in GDB 7.0".
407 2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
409 * top.c (input_from_terminal_p): Return 0 on BATCH_FLAG.
410 * utils.c (defaulted_query): Do not explicitly check for BATCH_FLAG.
411 (fputs_maybe_filtered): Do not do filtering also on
412 ! INPUT_FROM_TERMINAL_P.
414 2010-07-27 Joel Brobecker <brobecker@adacore.com>
416 * dwarf2read.c (dw2_find_pc_sect_symtab): Remove trailing newline
419 2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
421 * python/py-value.c (valpy_call): New Function.
423 2010-07-27 Ken Werner <ken.werner@de.ibm.com>
425 * dwarf2read.c (dwarf2_read_index): Initialize the types_list and
426 types_list_elements variables.
428 2010-07-26 Tom Tromey <tromey@redhat.com>
430 * dwarf2loc.c (locexpr_describe_location_piece): Also recognize
431 TLS with DW_OP_const4u or DW_OP_const8u.
433 2010-07-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
435 * ppc-linux-nat.c (store_vsx_register): Use PTRACE_GETVSXREGS to get
436 VSX registers contents.
438 2010-07-26 Jerome Guitton <guitton@adacore.com>
440 * dwarf2read.c (add_partial_symbol): Do not add a global variable if
441 its adress is null. Add comment to explain why.
444 2010-07-25 Jan Kratochvil <jan.kratochvil@redhat.com>
446 * linux-nat.c (linux_nat_do_thread_registers): Convert STOP_SIGNAL to
447 the host signal first.
449 2010-07-23 Tom Tromey <tromey@redhat.com>
451 * dwarf2read.c (struct dwarf2_per_objfile) <n_type_comp_units,
452 type_comp_units>: New fields.
453 (dw2_get_cu): New function.
454 (create_cus_from_index): Remove unused argument.
455 (create_signatured_type_hash_from_index): New function.
456 (create_addrmap_from_index): Update.
457 (dwarf2_read_index): Handle version 2.
458 (dw2_find_last_source_symtab, dw2_forget_cached_source_info)
459 (dw2_lookup_symtab, dw2_do_expand_symtabs_matching)
460 (dw2_print_stats, dw2_expand_all_symtabs)
461 (dw2_expand_symtabs_with_filename, dw2_find_symbol_file)
462 (dw2_expand_symtabs_matching, dw2_map_symbol_filenames): Update.
463 (dwarf2_initialize_objfile): Call create_debug_types_hash_table.
464 (allocate_signatured_type_hash_table): New function.
465 (add_signatured_type_cu_to_list): Likewise.
466 (create_debug_types_hash_table): Use them. Set type_comp_units.
467 (read_signatured_type): Ensure section data is available.
468 (add_address_entry): Don't record empty ranges.
469 (struct signatured_type_index_data): New.
470 (write_one_signatured_type): New function.
471 (write_psymtabs_to_index): Write type CUs.
472 (save_gdb_index_command): Update comment.
473 (process_type_comp_unit): Move inititalization of
475 (create_debug_types_hash_table): ... here.
477 2010-07-23 Jan Kratochvil <jan.kratochvil@redhat.com>
479 * gdb_gcore.sh (tmpfile): Remove the variable, its initialization,
480 cleanup and generating of gdb script to it.
481 (gdb): Use redirection from /dev/null. Use --nx. Turn off pagination
482 and terminal size. Convert $tmpfile to a series of -ex-es.
484 2010-07-23 Keith Seitz <keiths@redhat.com>
486 * symtab.c (basic_lookup_transparent_type): Call pre-expand
487 hook for STATIC_BLOCK types, too.
489 2010-07-23 Keith Seitz <keiths@redhat.com>
491 * dwarf2read.c: Remove unused typedef dwarf2_cu_per_cu_data_ptr
492 and vector definition.
494 2010-07-23 Jan Kratochvil <jan.kratochvil@redhat.com>
496 * linux-nat.c (cancel_breakpoint): Remove unused forward declaration.
498 2010-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
500 * dwarf2read.c: Include completer.h.
501 (save_gdb_index_command): Use matching usage command name.
502 (_initialize_dwarf2_read): New variable c, initialize it by add_cmd.
503 Set filename_completer for it.
505 2010-07-22 Tom Tromey <tromey@redhat.com>
507 * dwarf2read.c (create_debug_types_hash_table): Set objfile on
508 type signature's per-CU data.
510 2010-07-22 Pedro Alves <pedro@codesourcery.com>
512 * NEWS: Mention target reported shared libraries support by
515 2010-07-21 Pedro Alves <pedro@codesourcery.com>
520 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
521 * dwarf2read.c (process_die): Also allow DW_TAG_const_type
522 and DW_TAG_volatile_type.
523 (new_symbol): Likewise.
525 2010-07-21 Sami Wagiaalla <swagiaal@redhat.com>
527 * eval.c (evaluate_subexp_standard): Disabled evaluation of C++
528 function symbols before overload resolution.
530 2010-07-21 Pedro Alves <pedro@codesourcery.com>
532 * breakpoint.c (bptype_string): New, abstracted out from
533 print_one_breakpoint_location.
534 (print_one_breakpoint_location): Adjust.
535 (breakpoint_1): Adjust the type column width dynamically.
537 2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
539 * symfile.c (find_separate_debug_file_by_debuglink): Remove
540 a gdb_assert call, new comment.
542 2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
544 * linux-nat.c (linux_handle_extended_wait): Handle case when
545 event == PTRACE_EVENT_CLONE && stopping && WSTOPSIG (status) != SIGSTOP.
547 2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
550 * linux-nat.c (linux_nat_wait_1): Reset STATUS after calling
551 linux_nat_wait_1. Use always LP->STATUS afterwards.
553 2010-07-20 Hui Zhu <teawater@gmail.com>
555 * inf-ptrace.c (inf_ptrace_create_inferior): Initialize back_to.
556 (inf_ptrace_attach): Ditto.
558 2010-07-19 Jan Kratochvil <jan.kratochvil@redhat.com>
560 Make core files the process_stratum.
561 * corefile.c (core_target): New variable.
562 (core_file_command): Remove variable t, use core_target.
563 * corelow.c (core_ops): Make it static.
564 (init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
565 * defs.h (make_cleanup_unpush_target): New prototype.
566 * gdbarch.h: Regenerate.
567 * gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
568 * gdbcore.h (core_target): New declaration.
569 * inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
570 variables ops_already_pushed and back_to. Use push_target,
571 make_cleanup_unpush_target and discard_cleanups calls.
572 * record.c (record_open): Replace core_stratum by a core_bfd check.
573 * target.c (target_is_pushed): New function.
574 (find_core_target): Remove.
575 * target.h (enum strata) <core_stratum>: Remove.
576 (target_is_pushed): New declaration.
577 (find_core_target): Remove declaration.
578 * tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
579 * utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
581 2010-07-19 Hui Zhu <teawater@gmail.com>
583 * breakpoint.c (single_step_breakpoints_inserted): New
585 * breakpoint.h (single_step_breakpoints_inserted): Extern.
586 * infrun.c (maybe_software_singlestep): Add check code.
587 * record.c (record_resume): Add code for software single step.
588 (record_wait): Ditto.
590 2010-07-18 Jan Kratochvil <jan.kratochvil@redhat.com>
592 * linux-nat.c (linux_handle_extended_wait): Move variable new_lp into
593 a more inner block. Remove its unused declaration initializer.
595 2010-07-16 Thiago Jung Bauermann <bauerman@br.ibm.com>
597 * NEWS: Mention support for the new ptrace interface and hardware
598 accelerated watchpoint conditions on powerpc-linux.
600 2010-07-16 Ozkan Sezer <sezeroz@gmail.com>
602 * target.c (debug_to_insert_breakpoint): Instead of casting to unsigned
603 long and %ld, use core_addr_to_string() and %s to print CORE_ADDR vars
604 and host_address_to_string() and %s for pointers.
605 (debug_to_remove_breakpoint): Likewise.
606 (debug_to_region_ok_for_hw_watchpoint): Likewise.
607 (debug_to_can_accel_watchpoint_condition): Likewise.
608 (debug_to_stopped_data_address): Likewise.
609 (debug_to_watchpoint_addr_within_range): Likewise.
610 (debug_to_insert_hw_breakpoint): Likewise.
611 (debug_to_remove_hw_breakpoint): Likewise.
612 (debug_to_insert_watchpoint): Likewise.
613 (debug_to_remove_watchpoint): Likewise.
615 2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
617 * symtab.h (symbol_set_demangled_name): Now takes an optional objfile*
619 (cplus_specific): New struct.
620 * symtab.c (symbol_set_demangled_name): Updated.
621 Use cplus_specific for cplus symbols.
622 (symbol_get_demangled_name): Retrive the name from the cplus_specific
623 struct for cplus symbols.
624 (symbol_init_language_specific): Set cplus_specific for cplus symbols.
625 (symbol_set_names): Pass objfile to symbol_set_demangled_name.
626 * symtab.c (symbol_init_cplus_specific): New function.
628 2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
630 * symtab.h (symbol_set_demangled_name): New function.
631 (symbol_get_demangled_name): New function.
632 * symtab.c (symbol_set_demangled_name): New function.
633 (symbol_get_demangled_name): New function.
634 (symbol_init_language_specific): Use demangled_name setter and getter.
635 (symbol_set_names): Ditto.
636 (symbol_natural_name): Ditto.
637 (symbol_demangled_name): Ditto.
638 * dwarf2read.c (new_symbol): Ditto.
640 2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
642 * symtab.h: Renamed cplus_specific to mangled_lang.
643 * symtab.c (symbol_init_language_specific): Updated.
644 (symbol_set_names): Updated.
645 (symbol_natural_name): Updated.
646 (symbol_demangled_name): Updated.
647 * ada-lang.c (ada_decode_symbol): Updated.
648 * dwarf2read.c (new_symbol): Updated.
650 2010-07-14 Ken Werner <ken.werner@de.ibm.com>
652 * valops.c (value_assign): Do not call to value_coerce_to_target.
653 (value_must_coerce_to_target): Return 0 in case of TYPE_VECTOR.
655 2010-07-14 Ken Werner <ken.werner@de.ibm.com>
657 * MAINTAINERS: Add myself for write after approval privileges.
659 2010-07-13 Emmanuel Thomé <Emmanuel.Thome@gmail.com>
661 * c-valprint.c (c_val_print): Add embedded_offset to address in
662 call to val_print_array_elements.
664 2010-07-13 Tom Tromey <tromey@redhat.com>
666 * dwarf2read.c (dwarf2_read_index): Correctly set 'total_size'.
668 2010-07-13 Tom Tromey <tromey@redhat.com>
670 * dwarf2read.c (dwarf2_per_cu_text_offset): Fix reference to
673 2010-07-13 Tom Tromey <tromey@redhat.com>
675 * symfile.c (set_initial_language): Update.
676 (deduce_language_from_filename): Argument type now const.
677 * symtab.h (find_main_filename): Update.
678 (deduce_language_from_filename): Update.
679 * symtab.c (find_main_filename): Make result const.
680 * dwarf2read.c (dw2_find_symbol_file): Change return type.
681 * psymtab.c (find_symbol_file_from_partial): Change return type.
682 * symfile.h (struct quick_symbol_functions) <find_symbol_file>:
685 2010-07-13 Tom Tromey <tromey@redhat.com>
687 * breakpoint.c (save_cmdlist): No longer static.
688 * gdbcmd.h (save_cmdlist): Declare.
689 * symfile.c (symbol_file_add_with_addrs_or_offsets): Set
690 OBJF_READNOW on objfile if readnow_symbol_files.
691 * elfread.c (elf_symfile_read): Use dwarf2_initialize_objfile.
692 (elf_sym_fns_gdb_index): New global.
693 * dwarf2read.c: Include exceptions.h.
695 (struct mapped_index): New.
696 (dwarf2_per_cu_data_ptr): New typedef.
697 (struct dwarf2_per_objfile) <using_index, index_table, gdb_index>:
699 (GDB_INDEX_SECTION): New define.
700 (struct dwarf2_per_cu_quick_data): New.
701 (struct dwarf2_per_cu_data) <objfile>: New field.
704 (byte_swap): New function.
705 (MAYBE_SWAP): New macro.
706 (INDEX_SUFFIX): New macro.
707 (dw2_do_instantiate_symtab): New function.
708 (dw2_instantiate_symtab): Likewise.
709 (create_cus_from_index): Likewise.
710 (create_addrmap_from_index): Likewise.
711 (mapped_index_string_hash): Likewise.
712 (find_slot_in_mapped_hash): Likewise.
713 (dwarf2_read_index): Likewise.
714 (dw2_setup): Likewise.
715 (dw2_require_line_header): Likewise.
716 (dw2_require_full_path): Likewise.
717 (dw2_find_last_source_symtab): Likewise.
718 (dw2_forget_cached_source_info): Likewise.
719 (dw2_lookup_symtab): Likewise.
720 (dw2_lookup_symbol): Likewise.
721 (dw2_do_expand_symtabs_matching): Likewise.
722 (dw2_pre_expand_symtabs_matching): Likewise.
723 (dw2_print_stats): Likewise.
724 (dw2_dump): Likewise.
725 (dw2_relocate): Likewise.
726 (dw2_expand_symtabs_for_function): Likewise.
727 (dw2_expand_all_symtabs): Likewise.
728 (dw2_expand_symtabs_with_filename): Likewise.
729 (dw2_find_symbol_file): Likewise.
730 (dw2_map_ada_symtabs): Likewise.
731 (dw2_expand_symtabs_matching): Likewise.
732 (dw2_find_pc_sect_symtab): Likewise.
733 (dw2_map_symbol_names): Likewise.
734 (dw2_map_symbol_filenames): Likewise.
735 (dw2_has_symbols): Likewise.
736 (dwarf2_gdb_index_functions): New global.
737 (dwarf2_initialize_objfile): New function.
738 (process_psymtab_comp_unit): Update.
739 (add_partial_subprogram): Likewise.
740 (dwarf2_psymtab_to_symtab): Likewise.
741 (psymtab_to_symtab_1): Use dw2_do_instantiate_symtab.
742 (process_full_comp_unit): Update.
743 (find_file_and_directory): New function.
744 (read_file_scope): Use find_file_and_directory.
745 (dwarf2_per_cu_objfile): Update.
746 (dwarf2_per_cu_addr_size): Update.
747 (dwarf2_per_cu_offset_size): Update.
748 (dwarf2_free_objfile): Free the index, if needed.
749 (dwarf2_per_objfile_free): Unmap the index, if needed.
750 (struct strtab_entry): New.
751 (hash_strtab_entry): New function.
752 (eq_strtab_entry): Likewise.
753 (create_strtab): Likewise.
754 (add_string): Likewise.
755 (struct symtab_index_entry): New.
756 (struct mapped_symtab): New.
757 (hash_symtab_entry): New function.
758 (eq_symtab_entry): Likewise.
759 (delete_symtab_entry): Likewise.
760 (create_index_table): Likewise.
761 (create_mapped_symtab): Likewise.
762 (cleanup_mapped_symtab): Likewise.
763 (find_slot): Likewise.
764 (hash_expand): Likewise.
765 (add_index_entry): Likewise.
766 (add_indices_to_cpool): Likewise.
767 (write_hash_table): Likewise.
768 (add_address_entry): Likewise.
769 (write_psymbols): Likewise.
770 (write_obstack): Likewise.
771 (unlink_if_set): Likewise.
772 (write_psymtabs_to_index): Likewise.
773 (save_gdb_index_command): Likewise.
774 (_initialize_dwarf2_read): Install "save gdb-index"
776 (create_all_comp_units): Initialize 'objfile' field of CU.
777 (dwarf2_locate_sections): Check for .gdb_index.
778 * psymtab.h (dwarf2_gdb_index_functions): Declare.
779 * symfile.h (dwarf2_initialize_objfile): Declare.
781 2010-07-13 Tom Tromey <tromey@redhat.com>
783 * symtab.c (lookup_symbol_aux_symtabs): Call pre-expand hook.
784 (basic_lookup_transparent_type): Likewise.
785 * symfile.h (struct quick_symbol_functions)
786 <pre_expand_symtabs_matching>: New field.
787 * psymtab.c (pre_expand_symtabs_matching_psymtabs): New function.
788 (psym_functions): Update.
790 2010-07-13 Tom Tromey <tromey@redhat.com>
793 * symtab.h (domain_enum_tag) <LABEL_DOMAIN>: Update comment.
794 * linespec.c (decode_line_1): Update comment. Call decode_label.
795 (decode_label): New function.
796 (symbol_found): Handle LOC_LABEL.
797 * dwarf2read.c (new_symbol) <DW_TAG_label>: Set symbol's type and
798 domain. Call add_symbol_to_list.
800 2010-07-13 Tom Tromey <tromey@redhat.com>
802 * dwarf2loc.h (dwarf2_per_cu_text_offset): Declare.
803 * dwarf2loc.c (find_location_expression): Use
804 dwarf2_per_cu_text_offset.
805 (dwarf2_evaluate_loc_desc): Likewise.
806 (dwarf2_loc_desc_needs_frame): Likewise.
807 (compile_dwarf_to_ax): Likewise.
808 (loclist_describe_location): Likewise.
809 * dwarf2read.c (dwarf2_per_cu_text_offset): New function.
810 (dwarf2_per_cu_objfile): Update comment.
812 2010-07-12 Jan Kratochvil <jan.kratochvil@redhat.com>
814 * dwarf2read.c (read_subrange_type): Call read_subrange_type.
815 * p-lang.c (pascal_printstr): Likewise.
817 2010-07-09 Tom Tromey <tromey@redhat.com>
819 * python/py-prettyprint.c (gdbpy_get_display_hint): Don't use
820 'hint' if it is NULL.
822 2010-07-09 Hui Zhu <teawater@gmail.com>
824 * source.c (print_source_lines_base): Add check for noprint.
826 2010-07-08 Joel Brobecker <brobecker@adacore.com>
828 * python/python-config.py: Resync with Python 2.7 version of this
831 2010-07-08 Joel Brobecker <brobecker@adacore.com>
833 * NEWS: Fix typo in section name (s/GDB 7.1/GDB 7.2).
835 2010-07-07 Joel Brobecker <brobecker@adacore.com>
837 * NEWS: Create a new section for the next release branch.
838 Rename the section of the current branch, now that it has
841 2010-07-07 Joel Brobecker <brobecker@adacore.com>
843 GDB 7.2 branch created (branch timestamp: 2010-07-07 17:00 UTC)
844 * version.in: Bump version to 7.2.50.20100707-cvs.
846 2010-07-07 Tom Tromey <tromey@redhat.com>
848 * dwarf2read.c (dwarf2_const_value) <DW_form_addr>: Create a
850 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Set new field.
851 (dwarf2_loc_desc_needs_frame): Likewise.
852 (compile_dwarf_to_ax) <DW_OP_addr>: Use offset.
853 * dwarf2expr.h (struct dwarf_expr_context) <offset>: New field.
854 * dwarf2expr.c (execute_stack_op) <DW_OP_addr>: Use offset.
855 * dwarf2-frame.c (execute_stack_op): Set 'offset' field. Add
857 (struct dwarf2_frame_cache) <text_offset>: New field.
858 (dwarf2_frame_cache): Set new field.
859 (dwarf2_frame_prev_register): Update.
860 (dwarf2_frame_sniffer): Update.
861 (dwarf2_frame_base_sniffer): Update.
862 (dwarf2_frame_find_fde): Add 'out_offset' argument.
864 2010-07-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
865 Thiago Jung Bauermann <bauerman@br.ibm.com>
867 Support for hw accelerated condition watchpoints in booke powerpc.
869 * breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value
870 and move to eval.c. Change callers.
871 (insert_bp_location): Pass watchpoint condition in
872 target_insert_watchpoint.
873 (remove_breakpoint_1) Pass watchpoint condition in
874 target_remove_watchpoint.
875 (watchpoint_locations_match): Call
876 target_can_accel_watchpoint_condition.
877 * eval.c: Include wrapper.h.
878 (fetch_subexp_value): Moved from breakpoint.c.
879 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint):
881 (can_use_watchpoint_cond_accel): New function.
882 (calculate_dvc): Likewise.
883 (num_memory_accesses): Likewise.
884 (check_condition): Likewise.
885 (ppc_linux_can_accel_watchpoint_condition): Likewise
886 (ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel,
887 check_condition and calculate_dvc.
888 (ppc_linux_remove_watchpoint): Likewise.
889 (_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to
890 ppc_linux_can_accel_watchpoint_condition
891 * target.c (debug_to_insert_watchpoint): Add argument for watchpoint
893 (debug_to_remove_watchpoint): Likewise.
894 (debug_to_can_accel_watchpoint_condition): New function.
895 (update_current_target): Set to_can_accel_watchpoint_condition.
896 (setup_target_debug): Set to_can_accel_watchpoint_condition.
897 * target.h: Add opaque declaration for struct expression.
898 (struct target_ops) <to_insert_watchpoint>,
899 <to_remove_watchpoint>: Add new arguments to pass the watchpoint
900 <to_can_accel_watchpoint_condition>: New member.
901 condition. Update all callers and implementations.
902 (target_can_accel_watchpoint_condition): New macro.
903 * value.c (free_value_chain): New function.
904 * value.h (fetch_subexp_value): New prototype.
905 (free_value_chain): Likewise.
907 2010-07-07 Ulrich Weigand <uweigand@de.ibm.com>
909 * linux-nat.c (linux_nat_do_thread_registers): Use section size
910 from gdbarch_core_regset_sections also for .reg if present.
912 * amd64-linux-tdep.c (amd64_linux_regset_sections): Fix incorrect
913 section size for .reg.
914 * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
915 (ppc_linux_vmx_regset_sections): Likewise.
916 (ppc_linux_fp_regset_sections): Likewise.
917 (ppc64_linux_vsx_regset_sections): New variable.
918 (ppc64_linux_vmx_regset_sections): Likewise.
919 (ppc64_linux_fp_regset_sections): Likewise.
920 (ppc_linux_init_abi): Install core_regset_section lists appropriate
921 for current word size.
923 2010-07-06 Joel Brobecker <brobecker@adacore.com>
925 * server.c (myresume): Make static.
927 2010-07-06 Tom Tromey <tromey@redhat.com>
929 * configure, config.in: Rebuild.
930 * configure.ac (HAVE_LIBPYTHON2_7): New define.
931 * python/python-internal.h: Handle HAVE_LIBPYTHON2_7.
933 2010-07-06 Andreas Schwab <schwab@linux-m68k.org>
935 * breakpoint.c (_initialize_breakpoint): Add "cl" as alias for
938 2010-07-06 Ken Werner <ken.werner@de.ibm.com>
940 * gdbtypes.h (floatformats_ieee_half): Add declaration.
941 * gdbtypes.c (floatformats_ieee_half): New variable.
942 * doublest.c (floatformat_from_length): Set format to
943 gdbarch_half_format if length matches.
944 * gdbarch.sh (half_bit): New architecture method.
945 (half_format): Likewise.
946 * gdbarch.h: Regenerate.
947 * gdbarch.c: Likewise.
949 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
950 Joel Brobecker <brobecker@adacore.com>
952 Fix re-run of PIE executable, PR shlibs/11776.
953 * solib-svr4.c (svr4_relocate_main_executable) <symfile_objfile>: Remove
954 the part of pre-set SYMFILE_OBJFILE->SECTION_OFFSETS.
956 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
957 Joel Brobecker <brobecker@adacore.com>
959 * auxv.c (memory_xfer_auxv): Update attach comment.
960 * solib-svr4.c (svr4_special_symbol_handling): Remove the call to
961 svr4_relocate_main_executable.
962 (svr4_solib_create_inferior_hook): Make the call to
963 svr4_relocate_main_executable unconditional.
965 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
966 Joel Brobecker <brobecker@adacore.com>
968 * auxv.c (ld_so_xfer_auxv): Do not error on failed read of data_address.
970 2010-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
971 Joel Brobecker <brobecker@adacore.com>
973 Fix attaching to PIEs prelinked on the disk after the process was
975 * solib-svr4.c (svr4_exec_displacement): New variable arch_size.
976 Verify it against bfd_get_arch_size. Try to match arbitrary
977 displacement for the phdrs comparison.
979 2010-07-02 Tom Tromey <tromey@redhat.com>
982 * libunwind-frame.c (libunwind_frame_prev_register): Don't set
983 value as optimized-out.
985 2010-07-02 Ulrich Weigand <uweigand@de.ibm.com>
986 Thiago Jung Bauermann <bauerman@br.ibm.com>
988 * breakpoint.c (can_use_hardware_watchpoint): Answer "what does this
989 represent?" question in comment. Change comment to a proper sentence.
991 2010-07-02 Ken Werner <ken.werner@de.ibm.com>
993 * c-valprint.c (c_val_print): Fix printing of character vectors.
995 2010-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
997 * spu-tdep.c (spu_catch_start): Adjust the caller of changed
998 create_breakpoint prototype.
1000 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1002 * breakpoint.c (BREAK_ARGS_HELP, _initialize_breakpoint): Clarify
1003 usefulness suggestion of multiple breakpoints at same location.
1005 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1007 * breakpoint.c (BREAK_ARGS_HELP): Add missing `the'.
1009 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1011 * dwarf2loc.c (locexpr_tracepoint_var_ref)
1012 (loclist_tracepoint_var_ref): Handle optimized out values.
1014 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1016 * breakpoint.c (update_watchpoint, _initialize_breakpoint): Remove
1017 unnecessary space in string.
1018 * filesystem.c (_initialize_filesystem): Ditto.
1019 * frame.c (_initialize_frame): Ditto.
1020 * infcmd.c (step_once): Ditto.
1021 * infrun.c (_initialize_infrun): Ditto.
1022 * linux-nat.c (linux_child_follow_fork): Ditto.
1023 * maint.c (maintenance_deprecate): Ditto.
1024 * memattr.c (_initialize_mem): Ditto.
1025 * mips-tdep.c (_initialize_mips_tdep): Ditto.
1026 * monitor.c (monitor_open): Ditto.
1027 * procfs.c (procfs_xfer_memory): Ditto.
1028 * reverse.c (bookmarks_info): Ditto.
1029 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Ditto.
1030 * stack.c (_initialize_stack): Ditto.
1031 * tracepoint.c (_initialize_tracepoint): Ditto.
1032 * xtensa-tdep.c (xtensa_supply_gregset,
1033 xtensa_regset_from_core_section): Ditto.
1035 2010-07-01 Tom Tromey <tromey@redhat.com>
1037 * value.h (struct lval_funcs) <check_any_valid>: Rename from
1039 * value.c (value_entirely_optimized_out): Invert result. Update
1040 for new function name.
1042 2010-07-01 Pedro Alves <pedro@codesourcery.com>
1044 Static tracepoints support.
1046 * NEWS: Mention new support for static tracepoints.
1047 (New packets): Mention qTfSTM, qTsSTM, qTSTMat and
1048 qXfer:statictrace:read.
1049 (New features in the GDB remote stub, GDBserver): Mention static
1050 tracepoints support using an UST based backend.
1051 (New commands): Mention "info static-tracepoint-markers" and
1053 * breakpoint.c (is_marker_spec): New.
1054 (is_tracepoint): Handle static tracepoints.
1055 (validate_commands_for_breakpoint): Static tracepoints can't do
1057 (static_tracepoints_here): New.
1058 (bpstat_what): Handle static tracepoints.
1059 (print_one_breakpoint_location, allocate_bp_location, mention):
1061 (create_breakpoint_sal): Ditto.
1062 (decode_static_tracepoint_spec): New.
1063 (create_breakpoint): Replace `hardwareflag', and `traceflag' with
1064 `type_wanted'. Adjust. Handle static tracepoint marker
1066 (break_command_1): Adjust.
1067 (update_static_tracepoint): New.
1068 (update_breakpoint_locations): Handle static tracepoints.
1069 (breakpoint_re_set_one): Handle static tracepoint marker
1071 (disable_command, enable_command): Handle static tracepoints.
1072 (trace_command, ftrace_command): Adjust.
1073 (strace_command): New.
1074 (create_tracepoint_from_upload): Adjust.
1075 (save_breakpoints): Handle static tracepoints.
1076 (_initialize_breakpoint): Install the "strace" command.
1077 * breakpoint.h (enum bptype): New bp_static_tracepoint type.
1078 (struct breakpoint): New fields static_trace_marker_id and
1079 static_trace_marker_id_idx.
1080 (breakpoints_here_p): Declare.
1081 (create_breakpoint): Adjust.
1082 (static_tracepoints_here): Declare.
1083 * remote.c (struct remote_state) <static_tracepoints>: New field.
1084 (PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New.
1085 (remote_static_tracepoint_marker_at): New.
1086 (remote_static_tracepoint_markers_by_strid): New.
1087 (remote_static_tracepoint_feature): New.
1088 (remote_disconnected_tracing_feature): Handle "StaticTracepoints".
1089 (remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA.
1090 (remote_supports_static_tracepoints): New.
1091 (remote_download_tracepoint): Download static tracepoints.
1092 (init_remote_ops): Install remote_static_tracepoint_marker_at and
1093 remote_static_tracepoint_markers_by_strid.
1094 (_initialize_remote): Install set|show remote static-tracepoints,
1095 and set|show remote read-sdata-object commands.
1096 * target.c (update_current_target): Inherit and default
1097 to_static_tracepoint_marker_at, and
1098 to_static_tracepoint_markers_by_strid.
1099 * target.h (static_tracepoint_marker): Forward declare.
1100 (enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA.
1101 (static_tracepoint_marker_p): New typedef.
1102 (DEF_VEC_P(static_tracepoint_marker_p)): New VEC type.
1103 (struct target_ops): New fields to_static_tracepoint_marker_at and
1104 to_static_tracepoint_markers_by_strid.
1105 (target_static_tracepoint_marker_at)
1106 (target_static_tracepoint_markers_by_strid): New.
1107 * tracepoint.c: Include source.h.
1108 (validate_actionline): Handle $_sdata.
1109 (struct collection_list): New field strace_data.
1110 (add_static_trace_data): New.
1111 (clear_collection_list): Clear strace_data.
1112 (stringify_collection_list): Account for a possible static trace
1114 (encode_actions_1): Encode an $_sdata collection.
1115 (parse_tracepoint_definition): Handle static tracepoints.
1116 (parse_static_tracepoint_marker_definition): New.
1117 (release_static_tracepoint_marker): New.
1118 (print_one_static_tracepoint_marker): New.
1119 (info_static_tracepoint_markers_command): New.
1120 (sdata_make_value): New.
1121 (_initialize_tracepoint): Create the $_sdata convenience variable.
1122 Add the "info static-tracepoint-markers" command.
1123 Mention $_sdata in the "collect" command's help output.
1124 * tracepoint.h (struct static_tracepoint_marker): New.
1125 (parse_static_tracepoint_marker_definition)
1126 (release_static_tracepoint_marker): Declare.
1127 * mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust.
1128 * python/py-breakpoint.c (bppy_new): Adjust.
1130 2010-06-30 Joel Brobecker <brobecker@adacore.com>
1132 * python/python-internal.h (_XOPEN_SOURCE): Undefine before
1135 2010-06-29 Doug Evans <dje@google.com>
1138 * dwarf2read.c (dwarf2_add_field): Only create a symbol if
1139 DW_AT_external is present.
1143 * dwarf2read.c (dwarf2_add_field): If DW_AT_const_value is present,
1144 create a symbol for the field and record the value.
1145 (new_symbol): Handle DW_TAG_member.
1146 * gdbtypes.c (field_is_static): Remove FIXME.
1147 * symtab.c (search_symbols): When searching for VARIABLES_DOMAIN,
1148 only ignore LOC_CONST symbols that are enums.
1150 * dwarf2read.c: Remove trailing whitespace.
1152 Delete FIELD_LOC_KIND_DWARF_BLOCK, unused.
1153 * gdbtypes.h (enum field_loc_kind): Delete FIELD_LOC_KIND_DWARF_BLOCK.
1154 (struct main_type, field loc): Delete dwarf_block.
1155 (FIELD_DWARF_BLOCK): Delete.
1156 (SET_FIELD_DWARF_BLOCK): Delete.
1157 (TYPE_FIELD_DWARF_BLOCK): Delete.
1158 * gdb-gdb.py (StructMainTypePrettyPrinter.struct_field_location_img):
1161 2010-06-29 Hui Zhu <teawater@gmail.com>
1163 * record.c (set_record_pic_cmdlist,
1164 show_record_pic_cmdlist): New variables.
1165 (set_record_pic_command,
1166 show_record_pic_command): New functions.
1167 (record_pic_function, record_pic_line, record_pic_enum,
1168 set_record_pic_type, record_pic_hide_nofunction,
1169 record_pic_hide_nosource, record_pic_hide_same): New variables.
1170 (record_pic_fputs): New function.
1171 (function_list, node_list, edge_list): New struct.
1172 (function_list, node_list, edge_list): New variables.
1173 (record_pic_cleanups, record_pic_node,
1174 record_pic_edge, cmd_record_pic): New functions.
1175 (_initialize_record): Add new commands for record pic.
1177 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1179 * dwarf2read.c (read_structure_type) <fi.typedef_field_list>: Call
1180 ALLOCATE_CPLUS_STRUCT_TYPE.
1182 2010-06-28 Phil Muldoon <pmuldoon@redhat.com>
1183 Tom Tromey <tromey@redhat.com>
1184 Thiago Jung Bauermann <bauerman@br.ibm.com>
1186 * value.c (pack_unsigned_long): New function.
1187 (value_from_ulongest): New function.
1188 * value.h (value_from_ulongest): Declare.
1189 * python/python.c (_initialize_python): Call
1190 gdbpy_initialize_thread and gdbpy_initialize_inferior.
1191 * python/python-internal.h: Define thread_object.
1192 (gdbpy_inferiors, gdbpy_selected_thread)
1193 (frame_info_to_frame_object, create_thread_object)
1194 (find_thread_object, find_inferior_object)
1195 (gdbpy_initialize_thread, gdbpy_initialize_inferiors)
1196 (gdbpy_is_value_object, get_addr_from_python): Declare.
1197 * python/py-value.c (builtin_type_upylong): Define.
1198 (convert_value_from_python): Add logic for ulongest.
1199 (gdbpy_is_value_object): New function.
1200 * python/py-utils.c (get_addr_from_python): New function.
1201 * python/py-frame.c (frame_info_to_frame_object): Return a PyObject.
1202 (gdbpy_selected_frame): Use PyObject over frame_info.
1203 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-inferior and
1205 (SUBDIR_PYTHON_SRCS): Likewise.
1206 (py-inferior.o): New Rule.
1207 (py-infthread.o): New Rule.
1208 * python/py-inferior.c: New File.
1209 * python/py-infthread.c: New File.
1211 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1213 * c-typeprint.c (c_type_print_base): For no fields check include also
1214 TYPE_TYPEDEF_FIELD_COUNT. Print new typedefs section.
1215 * dwarf2read.c (struct typedef_field_list)
1216 (struct field_info) <typedef_field_list, typedef_field_list_count>: New.
1217 (dwarf2_add_typedef): New.
1218 (read_structure_type): Call dwarf2_add_typedef for DW_TAG_typedef.
1219 Copy also FI.TYPEDEF_FIELD_LIST.
1220 * gdbtypes.h (struct typedef_field)
1221 (struct cplus_struct_type) <typedef_field, typedef_field_count>
1222 (TYPE_TYPEDEF_FIELD_ARRAY, TYPE_TYPEDEF_FIELD, TYPE_TYPEDEF_FIELD_NAME)
1223 (TYPE_TYPEDEF_FIELD_TYPE, TYPE_TYPEDEF_FIELD_COUNT): New.
1225 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1227 * cp-namespace.c (cp_lookup_nested_type): New variable
1228 concatenated_name. Turn the current return condition into a reverse
1229 one. Call also lookup_static_symbol_aux on the constructed qualified
1231 * symtab.c (lookup_symbol_aux): Move variable objfile and searching in
1232 other files into a called ...
1233 (lookup_static_symbol_aux): ... new function here.
1234 * symtab.h (lookup_static_symbol_aux): New prototype.
1235 * valops.c (value_maybe_namespace_elt): Call also
1236 lookup_static_symbol_aux if we failed otherwise.
1238 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1240 Fix PR c++/11703 and PR gdb/1448.
1241 * c-exp.y (yylex) <last_was_coloncolon && first_was_coloncolon>: Add
1244 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1246 Fix modification of cplus_struct_default.
1247 * dwarf2read.c (dwarf2_add_member_fn) <no DW_AT_vtable_elem_location>:
1248 Call ALLOCATE_CPLUS_STRUCT_TYPE.
1249 * gdbtypes.c (cplus_struct_default): New empty initializer, comment it.
1251 2010-06-28 Joel Brobecker <brobecker@adacore.com>
1253 * NEWS: Add entry announcing the python directory.
1255 2010-06-28 Tom Tromey <tromey@redhat.com>
1257 * dwarf2read.c (read_structure_type): Allocate null cleanup later.
1259 2010-06-28 Doug Evans <dje@google.com>
1261 * breakpoint.c (breakpoint_sals_to_pc): Delete arg address, unused.
1262 All callers updated.
1264 2010-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1266 * cp-valprint.c (cp_print_value_fields) <recurse == 0>: Call
1267 obstack_begin after each obstack_free.
1269 2010-06-27 Doug Evans <dje@google.com>
1271 * value.c (value_static_field): Use `switch' instead of `if'.
1272 Assert-fail if passed invalid TYPE_FIELD_LOC_KIND.
1274 * valops.c (search_struct_field): Fix typo in error message.
1276 2010-06-26 Ulrich Weigand <uweigand@de.ibm.com>
1278 * dwarf2expr.c (execute_stack_op): Place preprocessor
1279 directives at the start of the source line.
1281 2010-06-25 Paul Hilfinger <hilfinger@adacore.com>
1283 * defs.h (make_command_stats_cleanup): Declare.
1284 (set_display_time): Declare.
1285 (set_display_space): Declare.
1286 * event-top.c (command_handler): Use make_command_stats_cleanup.
1287 * main.c (display_time, display_space): Move definitions to utils.c.
1288 (captured_main): Use make_command_stats_cleanup to get start-up
1290 Use set_display_time and set_display_space for processing OPT_STATISTICS
1292 * maint.c (maintenance_time_display): Use set_display_time.
1293 (maintenance_space_display): Use set_display_space.
1294 * top.c (execute_command): Remove obsolete 'maint time' code.
1295 (command_loop): Use make_command_stats_cleanup.
1296 * utils.c (struct cmd_stats): Structure for storing initial time
1298 (display_time, display_space): Move definitions here from utils.c.
1299 (set_display_time): New function.
1300 (set_display_space): New function.
1301 (make_command_stats_cleanup): New function.
1302 (report_command_stats): New auxiliary function for
1303 make_command_stats_cleanup.
1305 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1307 * solib-spu.c (append_ocl_sos): Fix xsnprintf statement for
1308 hosts where CORE_ADDR is long long.
1310 2010-06-25 Tom Tromey <tromey@redhat.com>
1313 * python/python.c (execute_gdb_command): Add keywords. Accept
1314 "to_string" argument.
1315 (struct restore_ui_file_closure): New.
1316 (restore_ui_file): New function.
1317 (make_cleanup_restore_ui_file): Likewise.
1318 (GdbMethods) <execute>: Update.
1320 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1322 * s390-tdep.c (s390_push_dummy_call): Error on stack overflow
1323 during inferior call stack frame setup.
1325 2010-06-25 Ken Werner <ken.werner@de.ibm.com>
1327 * solib-spu.c: Include "exception.h".
1328 (ocl_program_data_key): New variable.
1329 (append_ocl_sos): New function.
1330 (ocl_enable_break): Likewise.
1331 (spu_current_sos): Call append_ocl_sos.
1332 (spu_solib_loaded): Call ocl_enable_break.
1333 (_initialize_spu_solib): Register ocl_program_data_key.
1335 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1337 * cp-support.c (reset_directive_searched): New function.
1338 (make_symbol_overload_list_using): Prevent recursive calls.
1340 2010-06-25 Phil Muldoon <pmuldoon@redhat.com>
1342 * printcmd.c (print_variable_and_value): Print error message on
1345 2010-06-25 Ulrich Weigand <uweigand@de.ibm.com>
1347 * dwarf2expr.h (struct dwarf_value_location): Use ULONGEST as type
1349 (struct dwarf_expr_piece): Rename "expr" member to "mem". Add new
1351 (dwarf_expr_push): Change input type to ULONGEST.
1352 (dwarf_expr_fetch): Change return type to ULONGEST.
1353 (dwarf_expr_fetch_address): Add prototype.
1354 (dwarf2_read_address): Remove prototype.
1355 * dwarf2expr.c (dwarf_expr_push): Use ULONGEST as type of stack values.
1356 Truncate stack values to ctx->addr_size bytes.
1357 (dwarf_expr_fetch): Change return value to ULONGEST.
1358 (dwarf_expr_fetch_address): New function.
1359 (add_piece): Use dwarf_expr_fetch_address instead of dwarf_expr_fetch
1360 when appropriate. Update for struct dwarf_expr_piece changes.
1361 (dwarf2_read_address): Remove.
1362 (unsigned_address_type): Remove.
1363 (signed_address_type): Remove.
1364 (execute_stack_op): Use dwarf_expr_fetch_address instead of
1365 dwarf_expr_fetch when appropriate. Use ULONGEST as type of stack
1366 values. Perform operations on ULONGEST instead of on GDB values,
1367 sign-extending from ctx->addr_size bytes as needed. Read DW_OP_addr
1368 values and DW_OP_deref results as unsigned integers.
1369 * dwarf2loc.c (read_pieced_value): Update for struct dwarf_expr_piece
1371 (write_pieced_value): Likewise.
1372 (dwarf2_evaluate_loc_desc): Use dwarf_expr_fetch_address instead of
1373 dwarf_expr_fetch when appropriate.
1374 (compile_dwarf_to_ax): Read DW_OP_addr values as unsigned integers.
1375 * dwarf2-frame.c (execute_stack_op): Use dwarf_expr_fetch_address
1376 instead of dwarf_expr_fetch when appropriate.
1378 2010-06-25 Pierre Muller <muller@ics.u-strasbg.fr>
1380 * c-typeprint.c (c_print_typedef): Append new type name for typedefs.
1382 2010-06-24 Joel Brobecker <brobecker@adacore.com>
1384 * python/python.c (_initialize_python): Add new "constant"
1385 PYTHONDIR in gdb module. Insert this path at the head of
1386 sys.path. Set gdb.__path__ to gdb.PYTHONDIR + '/gdb' and
1387 exec its __init__.py script if it exists in that directory.
1389 2010-06-24 Kevin Buettner <kevinb@redhat.com>
1391 * rx-tdep.c (RX_ACC_REGNUM): Define.
1392 (RX_NUM_REGS): Redefine to 26.
1393 (rx_register_name): Add register "acc". Change order of several
1394 registers. Change name of "vct" register to "fintv" to match RX
1396 (rx_register_type): Add case for RX_ACC_REGNUM.
1398 2010-06-24 Tom Tromey <tromey@redhat.com>
1400 * psymtab.c (lookup_partial_symbol): Mark definition as static.
1402 2010-06-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1403 Tom Tromey <tromey@redhat.com>
1405 Fix GDB startup on readonly filesystem.
1406 * charset.c (find_charset_names): Use PEX_USE_PIPES for pex_init.
1408 2010-06-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1409 Pedro Alves <pedro@codesourcery.com>
1412 * breakpoint.c (handle_jit_event): New function.
1413 (bpstat_what): Remove enum class, kc, ss, sn, sgl, slr, clr, sr, shl,
1414 jit, err, table and bs_class. New variables shlib_event, jit_event,
1415 this_action and bptype. Change bs_class assignments to this_action
1416 assignments. new unhandled bptype internal error. Move here
1417 shlib_event and jit_event handling from handle_inferior_event.
1418 * breakpoint.h (enum bpstat_what_main_action): Extend the comment.
1419 Reorder items. Remove BPSTAT_WHAT_CHECK_SHLIBS and
1420 BPSTAT_WHAT_CHECK_JIT.
1421 * inferior.h (debug_infrun, stop_on_solib_events): New declarations.
1422 * infrun.c (debug_infrun, stop_on_solib_events): Remove static.
1423 (handle_inferior_event): Reinitialize frame and gdbarch after
1424 bpstat_what call. Move BPSTAT_WHAT_CHECK_SHLIBS and
1425 BPSTAT_WHAT_CHECK_JIT handling to bpstat_what. Reinitialize even
1426 gdbarch when frame gets reinitialized.
1428 2010-06-24 Hui Zhu <teawater@gmail.com>
1430 * printcmd.c (ui_printf): New function.
1431 (printf_command): Call ui_printf.
1432 (_initialize_printcmd): New command "eval".
1434 2010-06-23 Ulrich Weigand <uweigand@de.ibm.com>
1436 * infrun.c (handle_inferior_event): Handle presence of single-step
1437 breakpoints for TARGET_WAITKIND_FORKED and TARGET_WAITKIND_VFORKED.
1438 Cancel single-step breakpoints for TARGET_WAITKIND_EXITED,
1439 TARGET_WAITKIND_SIGNALED, and TARGET_WAITKIND_EXECD.
1440 * breakpoint.c (detach_single_step_breakpoints): New function.
1441 (detach_breakpoints): Call it.
1442 (cancel_single_step_breakpoints): New function.
1443 * breakpoint.h (cancel_single_step_breakpoints): Add prototype.
1445 * spu-tdep.c (spu_memory_remove_breakpoint): New function.
1446 (spu_gdbarch_init): Install it.
1448 2010-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1450 * configure.ac: Always set RDYNAMIC at least as `-rdynamic'.
1451 * configure: Regenerate.
1453 2010-06-22 Hui Zhu <teawater@gmail.com>
1455 * i386-tdep.c (i386_record_lea_modrm): Change warning to query.
1456 (i386_process_record): Ditto.
1457 * record.c (record_memory_query): New variable.
1458 (_initialize_record): New command "set record memory-query".
1459 * record.h (record_memory_query): New extern.
1461 2010-06-21 Doug Evans <dje@google.com>
1463 * i386-tdep.h (i386_displaced_step_copy_insn): Declare.
1464 * i386-tdep.c (i386_displaced_step_copy_insn): New function.
1465 (i386_syscall_p): Change type of lengthp to int.
1466 (i386_displaced_step_fixup): Handle kernels that run one past a
1468 * i386-linux-tdep.c (i386_linux_init_abi): Use
1469 i386_displaced_step_copy_insn instead of
1470 simple_displaced_step_copy_insn.
1472 2010-06-21 Tom Tromey <tromey@redhat.com>
1474 * dwarf2read.c (read_base_type): Handle DW_ATE_UTF.
1475 (dwarf_type_encoding_name): Likewise.
1477 2010-06-21 Tom Tromey <tromey@redhat.com>
1479 * p-valprint.c (pascal_val_print): Use TYPE_ERROR_NAME.
1480 * p-typeprint.c (pascal_type_print_base): Use TYPE_ERROR_NAME.
1481 * m2-valprint.c (m2_val_print): Use TYPE_ERROR_NAME.
1482 * gdbtypes.h (TYPE_ERROR_NAME): New macro.
1483 * f-valprint.c (f_val_print): Use TYPE_ERROR_NAME.
1484 * f-typeprint.c (f_type_print_base): Use TYPE_ERROR_NAME.
1485 * dwarf2read.c (tag_type_to_type): Create a new error type on
1487 * c-valprint.c (c_val_print): Use TYPE_ERROR_NAME.
1488 * c-typeprint.c (c_type_print_base): Use TYPE_ERROR_NAME.
1490 2010-06-21 Michael Snyder <msnyder@vmware.com>
1492 * breakpoint.c (_initialize_breakpoint): Use add_prefix_cmd,
1493 not add_abbrev_prefix_cmd, for "enable breakpoints".
1495 2010-06-21 Ulrich Weigand <uweigand@de.ibm.com>
1497 * dwarf2loc.c (find_location_expression): Add relocation offset
1498 to base-address-selection entry base addresses. Read addresses
1499 (and offsets) as signed/unsigned integers, depending on the
1500 BFD's sign_extend_vma flag. Do not call dwarf2_read_address.
1501 (loclist_describe_location): Likewise.
1502 (disassemble_dwarf_expression): Read DW_OP_addr operand as
1503 unsigned integer. Do not call dwarf2_read_address.
1504 (locexpr_describe_location): Likewise for DW_OP_GNU_push_tls_address.
1506 2010-06-19 Ulrich Weigand <uweigand@de.ibm.com>
1508 * spu-tdep.c (spu_frame_unwind_cache): Use LSLR register
1509 value instead of hard-coded SPU_LS_SIZE.
1510 (spu_software_single_step): Likewise.
1511 * spu-tdep.h (SPU_LS_SIZE): Remove.
1513 2010-06-19 Ulrich Weigand <uweigand@de.ibm.com>
1515 * spu-multiarch.c (spu_xfer_partial): Wrap around local store
1516 limit on local store memory accesses.
1517 * spu-linux-nat.c (spu_xfer_partial): Likewise.
1518 * spu-tdep.c (spu_lslr): Remove.
1519 (spu_pointer_to_address): Do not truncate addresses.
1520 (spu_integer_to_address): Likewise.
1521 (spu_overlay_new_objfile): Use SPU_OVERLAY_LMA.
1522 * spu-tdep.h: Add comments.
1523 (SPUADDR_SPU): Respect SPU_OVERLAY_LMA bit.
1524 (SPU_OVERLAY_LMA): Define.
1526 2010-06-18 Stan Shebs <stan@codesourcery.com>
1528 * osdata.c (get_osdata): Warn separately if target does not report
1530 (info_osdata_command): Allow empty type, report error if target
1531 does not return available types of OS data.
1532 * linux-nat.c (linux_nat_xfer_osdata): Report list of OS data
1533 types if no annex supplied.
1535 * thread.c (thread_id_make_value): Make a value representing the
1537 (_initialize_thread): Create $_thread.
1539 2010-06-17 Joel Brobecker <brobecker@adacore.com>
1541 * dwarf2read.c (psymtabs_addrmap_cleanup): Add empty line after
1542 last local variable declaration. No real code change.
1544 2010-06-17 Tom Tromey <tromey@redhat.com>
1546 * dwarf2read.c (psymtabs_addrmap_cleanup): New function.
1547 (dwarf2_build_psymtabs_hard): Use it. Create addrmap on a
1550 2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com>
1551 Jan Kratochvil <jan.kratochvil@redhat.com>
1553 * breakpoint.c: Include parser-defs.h.
1554 (watchpoint_exp_is_const): New function.
1555 (watch_command_1): Call watchpoint_exp_is_const to check
1556 if the expression is constant.
1558 2010-06-15 Andreas Schwab <schwab@linux-m68k.org>
1560 * configure.ac: Check for RDYNAMIC also for cross builds.
1561 * configure: Regenerate.
1563 2010-06-15 Pedro Alves <pedro@codesourcery.com>
1565 * Makefile.in (ALL_TARGET_OBS): Remove solib-target.o.
1566 (SFILES): Remove solib-null.c, add solib-target.c.
1567 (COMMON_OBS): Remove solib-null.o, add solib-target.o.
1568 (ALLDEPFILES): Remove solib-target.c.
1569 * solib-target.c (_initialize_solib_target): Set
1570 current_target_so_ops to solib_target_so_ops if not already set.
1571 * solib-null.c: Delete.
1573 2010-06-14 Pedro Alves <pedro@codesourcery.com>
1575 * NEWS: Mention GDBserver's JIT compilation of tracepoint
1578 2010-06-14 Ulrich Weigand <uweigand@de.ibm.com>
1580 * cp-valprint.c (cp_print_static_field): Members of
1581 dont_print_stat_array_obstack are of type "struct type *".
1582 (_initialize_cp_valprint): Likewise.
1584 2010-06-14 Ulrich Weigand <uweigand@de.ibm.com>
1586 * frame.c (frame_register_unwind): Do not access contents
1587 of "optimized out" unwound register value.
1589 2010-06-14 Jan Kratochvil <jan.kratochvil@redhat.com>
1591 * ada-lang.h (ada_print_type): Make varstring const.
1592 * ada-typeprint.c (print_func_type): Make name const.
1593 (ada_print_type): Make varstring const.
1594 * c-lang.h (c_print_type): Make varstring const.
1595 * c-typeprint.c (c_print_type): Likewise.
1596 * f-lang.h (f_print_type): Likewise.
1597 * f-typeprint.c (f_print_type): Likewise.
1598 * jv-lang.h (java_print_type): Likewise.
1599 * jv-typeprint.c (java_print_type): Likewise.
1600 * language.c (unk_lang_print_type): Likewise.
1601 * language.h (struct language_defn) <la_print_type>: Likewise.
1602 * m2-lang.h (m2_print_type): Likewise.
1603 * m2-typeprint.c (m2_print_type): Likewise.
1604 * p-lang.h (pascal_print_type): Likewise.
1605 * p-typeprint.c (pascal_print_type): Likewise.
1607 2010-06-11 Stan Shebs <stan@codesourcery.com>
1609 Add per-operation permission flags.
1611 * target.h (struct target_ops): New method to_set_permissions.
1612 (target_set_permissions): New macro.
1613 (target_insert_breakpoint): Change macro to function.
1614 (target_remove_breakpoint): Ditto.
1615 (target_stop): Ditto.
1616 (may_write_registers): Declare.
1617 (may_write_memory): Declare.
1618 (may_insert_breakpoints): Declare.
1619 (may_insert_tracepoints): Declare.
1620 (may_insert_fast_tracepoints): Declare.
1621 (may_stop): Declare.
1622 * target.c (may_write_registers, may_write_registers_1): New globals.
1623 (may_write_memory, may_write_memory_1): New globals.
1624 (may_insert_breakpoints, may_insert_breakpoints_1): New globals.
1625 (may_insert_tracepoints, may_insert_tracepoints_1): New globals.
1626 (may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
1628 (may_stop, may_stop_1): New global.
1629 (target_xfer_partial): Test for write permission.
1630 (target_store_registers): Ditto.
1631 (target_insert_breakpoint): New function.
1632 (target_remove_breakpoint): New function.
1633 (target_stop): New function.
1634 (_initialize_targets): Add new set/show variables.
1635 (set_write_memory_permission): New function.
1636 (update_target_permissions): New function.
1637 (set_target_permissions): New function.
1638 (update_current_target): Default to_set_permissions.
1639 (_initialize_targets): Use new globals and setter function.
1640 * tracepoint.c (start_tracing): Test for permission.
1641 * inferior.h (update_observer_mode): Declare.
1642 * infrun.c (non_stop_1): Define earlier.
1643 (observer_mode, observer_mode_1): New globals.
1644 (set_observer_mode, show_observer_mode): New functions.
1645 (update_observer_mode): New function.
1646 (_initialize_infrun): Define "set observer" command.
1647 * remote.c (PACKET_QAllow): New optional packet.
1648 (remote_protocol_features): Add QAllow.
1649 (remote_set_permissions): New function.
1650 (remote_start_remote): Call it.
1651 (init_remote_ops): Add it to target vector.
1652 (_initialize_remote): Add config command for QAllow.
1654 2010-06-11 Tom Tromey <tromey@redhat.com>
1656 * dwarf2read.c (dwarf2_add_member_fn): Handle correct form of
1657 DW_AT_vtable_elem_location even when GCC extension is seen.
1659 2010-06-11 Tom Tromey <tromey@redhat.com>
1661 PR gdb/9977, PR exp/11636:
1662 * value.h (value_offset): Update.
1663 (struct lval_funcs) <check_validity>: New field.
1664 <copy_closure>: Make argument const.
1665 (value_computed_closure): Update.
1666 (value_contents_for_printing): Declare.
1667 (value_bits_valid): Likewise.
1668 (val_print): Likewise.
1669 (set_value_component_location): Update.
1670 (value_entirely_optimized_out): Declare.
1671 * value.c (value_offset): Argument now const.
1672 (require_not_optimized_out): New function.
1673 (value_contents_for_printing): New function.
1674 (value_contents_all): Call require_not_optimized_out.
1675 (value_contents): Likewise.
1676 (value_bits_valid): New function.
1677 (value_computed_closure): Argument now const.
1678 (set_value_component_location): Make 'whole' argument const.
1679 (value_entirely_optimized_out): New function.
1680 (value_bitsize): Argument now 'const'.
1681 (value_bitpos): Likewise.
1682 (value_type): Likewise.
1683 * valprint.h (val_print_array_elements): Update.
1684 * valprint.c (val_print): Add 'val' argument. Use
1685 valprint_check_validity.
1686 (valprint_check_validity): New function.
1687 (value_check_printable): Use value_entirely_optimized_out.
1688 (common_val_print): Update.
1689 (value_print): Likewise.
1690 (val_print_array_elements): Add 'val' argument.
1691 * valops.c (value_fetch_lazy): Use value_contents_for_printing,
1692 value_bits_valid. Reinit frame cache for lval_computed.
1693 * sh64-tdep.c (sh64_do_register): Update.
1694 * scm-valprint.c (scm_val_print): Add 'val' argument.
1695 * scm-lang.h (scm_val_print): Update.
1696 * python/python.h (apply_val_pretty_printer): Update.
1697 * python/py-prettyprint.c (apply_val_pretty_printer): Add 'val'
1698 argument. Call set_value_component_location.
1699 * printcmd.c (print_scalar_formatted): Update.
1700 * p-valprint.c (pascal_val_print): Add 'val' argument.
1701 (pascal_object_print_value_fields): Likewise.
1702 (pascal_object_print_value): Likewise.
1703 (pascal_object_print_static_field): Update.
1704 * p-lang.h (pascal_val_print): Update.
1705 (pascal_object_print_value_fields): Update.
1706 * mt-tdep.c (mt_registers_info): Update.
1707 * mi/mi-main.c (get_register): Update.
1708 (mi_cmd_data_evaluate_expression): Use common_val_print.
1709 * m2-valprint.c (m2_print_array_contents): Add 'val' argument.
1710 (m2_print_unbounded_array): Likewise.
1711 (m2_val_print): Likewise.
1712 * m2-lang.h (m2_val_print): Update.
1713 * language.h (struct language_defn) <la_val_print>: Add 'val'
1715 (LA_VAL_PRINT): Likewise.
1716 * language.c (unk_lang_val_print): Add 'val' argument.
1717 * jv-valprint.c (java_print_value_fields): Add 'val' argument.
1718 (java_val_print): Likewise.
1719 * jv-lang.h (java_val_print): Add 'val' argument.
1720 * infcmd.c (default_print_registers_info): Update.
1721 * f-valprint.c (f77_print_array_1): Add 'val' argument.
1722 (f77_print_array): Likewise.
1723 (f_val_print): Likewise.
1724 * f-lang.h (f_val_print): Add 'val' argument.
1725 * dwarf2loc.c (read_pieced_value): Use value_bitsize and
1727 <DWARF_VALUE_OPTIMIZED_OUT>: Don't print warning. Call
1728 set_value_optimized_out.
1729 (write_pieced_value): Use value_bitsize and value_bitpos.
1730 <default>: Don't exit loop.
1731 (check_pieced_value_validity): New function.
1732 (pieced_value_funcs): Reference check_pieced_value_validity,
1733 check_pieced_value_invalid.
1734 (copy_pieced_value_closure): Update.
1735 (check_pieced_value_bits): New function.
1736 (check_pieced_value_invalid): New function.
1737 * d-valprint.c (dynamic_array_type): Add 'val' argument.
1738 (d_val_print): Likewise.
1739 * d-lang.h (d_val_print): Update.
1740 * cp-valprint.c (cp_print_value_fields): Add 'val' argument.
1741 (cp_print_value_fields_rtti): Likewise.
1742 (cp_print_value): Likewise.
1743 (cp_print_static_field): Update.
1744 * c-valprint.c (c_val_print): Add 'val' argument.
1745 (c_value_print): Update.
1746 * c-lang.h (c_val_print): Update.
1747 (cp_print_value_fields): Likewise.
1748 (cp_print_value_fields_rtti): Likewise.
1749 * ada-valprint.c (struct ada_val_print_args): Remove.
1750 (val_print_packed_array_elements): Add 'val' argument.
1751 (ada_val_print): Likewise. Rewrite.
1752 (ada_val_print_stub): Remove.
1753 (ada_val_print_array): Add 'val' argument.
1754 (ada_val_print_1): Likewise.
1755 (print_variant_part): Likewise.
1756 (ada_value_print): Update.
1757 (print_record): Add 'val' argument.
1758 (print_field_values): Likewise.
1759 * ada-lang.h (ada_val_print): Update.
1761 2010-06-11 Tom Tromey <tromey@redhat.com>
1763 * vec.h (VEC_cleanup): New macro.
1764 (DEF_VEC_ALLOC_FUNC_I): Update.
1765 (DEF_VEC_ALLOC_FUNC_P): Likewise.
1766 (DEF_VEC_ALLOC_FUNC_O): Likewise.
1767 * dwarf2loc.c (struct axs_var_loc): Remove.
1768 (unimplemented): New function.
1769 (translate_register): Likewise.
1770 (access_memory): Likewise.
1771 (compile_dwarf_to_ax): Likewise.
1772 (dwarf2_tracepoint_var_loc): Remove.
1773 (dwarf2_tracepoint_var_access): Likewise.
1774 (dwarf2_tracepoint_var_ref): Likewise.
1775 (locexpr_tracepoint_var_ref): Use compile_dwarf_to_ax.
1776 (loclist_tracepoint_var_ref): Likewise.
1777 * dwarf2expr.h (dwarf_expr_require_composition): Declare.
1778 * dwarf2expr.c (dwarf_expr_require_composition): Rename from
1779 require_composition. No longer static.
1780 (execute_stack_op): Update.
1781 * ax-gdb.h (trace_kludge): Declare.
1783 2010-06-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1785 * breakpoint.c (breakpoint_restore_shadows): New OWNER comment.
1786 (should_be_inserted): Return zero also on NULL OWNER.
1787 (breakpoint_program_space_exit): New OWNER comment.
1788 (insert_breakpoint_locations): Extend comment for OWNER.
1789 (remove_breakpoint_1, remove_breakpoint): Assert on OWNER.
1790 (breakpoint_init_inferior, breakpoint_here_p, breakpoint_thread_match):
1792 (print_it_typical): Return PRINT_UNKNOWN on NULL OWNER.
1793 (watchpoint_check): New assert on BREAKPOINT_AT and OWNER.
1794 (bpstat_check_location): New assert on OWNER.
1795 (bpstat_check_watchpoint, bpstat_check_breakpoint_conditions): Move BL
1796 and B initializations to the code block. New assert on them.
1797 (print_one_breakpoint_location): New OWNER comment.
1798 (watchpoint_locations_match): Assert on OWNER.
1799 (breakpoint_locations_match): Move HW_POINT1 and HW_POINT2
1800 initializations to the code block. New assert on OWNER.
1801 (set_breakpoint_location_function): New assert on OWNER.
1802 (disable_breakpoints_in_shlibs, disable_breakpoints_in_unloaded_shlib)
1803 (bp_location_compare, update_global_location_list)
1804 (update_global_location_list): New OWNER comment.
1806 2010-06-09 Ulrich Weigand <uweigand@de.ibm.com>
1808 * Makefile.in (HFILES_NO_SRCDIR): Remove config/i386/nm-linux.h
1810 2010-06-09 Ulrich Weigand <uweigand@de.ibm.com>
1812 * config/nm-linux.h (struct target_ops): Remove forward declaration.
1813 (lin_thread_get_thread_signals): Remove prototype.
1814 (GET_THREAD_SIGNALS): Remove.
1815 * linux-nat.h (lin_thread_get_thread_signals): Add prototype.
1816 * linux-thread-db.c (check_thread_signals): Directly call
1817 lin_thread_get_thread_signals; do not check GET_THREAD_SIGNALS.
1819 2010-06-09 Ulrich Weigand <uweigand@de.ibm.com>
1821 * gregset.h (GDB_FPXREGSET_T): Remove.
1822 (gdb_fpxregset_t): Likewise.
1823 (supply_fpxregset): Remove prototype.
1824 (fill_fpxregset): Likewise.
1825 * i386-linux-nat.c (supply_fpxregset): Remove.
1826 (fill_fpxregset): Likewise.
1827 (fetch_fpxregs): Inline supply_fpxregset call.
1828 (store_fpxregs): Inline fill_fpxregset call.
1830 * config/i386/linux.mh: Set NAT_FILE to config/nm-linux.h.
1831 * config/i386/nm-linux.h: Remove file.
1833 2010-06-09 Michael Snyder <msnyder@vmware.com>
1835 * target.c (update_current_target): Fix spelling error in comment.
1836 (target_mourn_inferior): Fix spelling error in error message.
1838 2010-06-08 Paul Hilfinger <hilfingr@adacore.com>
1840 * dictionary.h (dict_iter_name_first, dict_iter_name_next): Refer to
1841 SYMBOL_SEARCH_NAME, not SYMBOL_BEST_NAME, in comments.
1843 2010-06-08 Michael Snyder <msnyder@vmware.com>
1845 * remote.c (remote_close): Set inferior_ptid to null_ptid.
1847 2010-06-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1849 * configure.ac <"${have_libpython}" != no>: New workaround of
1851 * configure: Regenerate.
1853 2010-06-08 Hui Zhu <teawater@gmail.com>
1855 * record.c (record_wait): Move signal out of replay code.
1857 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1860 * dwarf2-frame.c (no_dwarf_call): New function.
1861 (execute_stack_op): Set CTX->DWARF_CALL.
1862 * dwarf2expr.c (execute_stack_op) <DW_OP_call2, DW_OP_call4>: New.
1863 * dwarf2expr.h (struct dwarf_expr_context) <dwarf_call>: New.
1864 (struct dwarf_expr_context) <get_subr>: Remove the #if0-ed field.
1865 * dwarf2loc.c (per_cu_dwarf_call, dwarf_expr_dwarf_call): New functions.
1866 (dwarf2_evaluate_loc_desc): Initialize CTX->DWARF_CALL.
1867 (needs_frame_dwarf_call): New function.
1868 (dwarf2_loc_desc_needs_frame): Initialize CTX->DWARF_CALL.
1869 * dwarf2read.c (follow_die_offset): Based on former follow_die_ref.
1870 Update the comment. Move variables die, offset and error call to ...
1871 (follow_die_ref): ... a new function.
1872 (dwarf2_fetch_die_location_block): New function.
1873 * dwarf2loc.h (dwarf2_fetch_die_location_block): New prototype.
1875 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1877 * dwarf2loc.c (struct dwarf_expr_baton) Replace objfile by per_cu.
1878 (dwarf_expr_tls_address): Use per_cu instead of objfile.
1879 (dwarf2_evaluate_loc_desc): Drop initialization of BATON.OBJFILE.
1880 Initialize new BATON.PER_CU. Adjust CTX->GDBARCH initialization for
1882 (struct needs_frame_baton): New field per_cu.
1883 (dwarf2_loc_desc_needs_frame): Initialize new BATON.PER_CU.
1884 * dwarf2read.c (struct dwarf2_per_cu_data) <cu>: Extend the comment.
1886 2010-06-07 Sami Wagiaalla <swagiaal@redhat.com>
1888 * cp-support.c (make_symbol_overload_list_namespace): Only search
1889 static and global blocks.
1890 (make_symbol_overload_list_block): New function.
1891 (make_symbol_overload_list): Separate namespace search from block
1893 (make_symbol_overload_list_qualified): Use
1894 make_symbol_overload_list_block.
1896 2010-06-07 Sami Wagiaalla <swagiaal@redhat.com>
1898 * value.h: Created oload_search_type enum.
1899 (find_overload_match): Use oload_search_type enum.
1900 * valops.c (find_overload_match): Support combined member and
1902 * eval.c (evaluate_subexp_standard): Calls to
1903 find_overload_match now use oload_search_type enum.
1904 (oload_method_static): Verify index is a proper value.
1905 * valarith.c (value_user_defined_cpp_op): Search for and handle
1906 both member and non-member operators.
1907 (value_user_defined_cpp_op): New function.
1908 (value_user_defined_op): New function.
1909 (value_x_unop): Use value_user_defined_op.
1910 (value_x_binop): Ditto.
1911 * cp-support.c (make_symbol_overload_list_using): Added block
1913 Add check for namespace aliases and imported declarations.
1915 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1917 * breakpoint.h (owner): Extend the comment.
1919 2010-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1921 Clear stale specific bp_location from former whole breakpoint.
1922 * breakpoint.c (delete_breakpoint): Move the stale referencing clear
1924 (free_bp_location): ... here. Rename there the called function to
1925 bpstat_remove_bp_location_callback.
1926 (bpstat_remove_breakpoint_callback): Rename to ...
1927 (bpstat_remove_bp_location_callback): ... here, change DATA resolution
1928 to struct bp_location. Change the called function to
1929 bpstat_remove_bp_location. Create new declaration for the function.
1930 (bpstat_remove_breakpoint): Rename to ...
1931 (bpstat_remove_bp_location): ..., change the parameter to loc, adjust
1932 code for the new parameter type.
1934 2010-06-07 Nathan Sidwell <nathan@codesourcery.com>
1936 * README: Make version-agnostic.
1938 2010-06-05 Jan Kratochvil <jan.kratochvil@redhat.com>
1940 Fix duplicate types for single DIE.
1941 * dwarf2read.c (read_structure_type): Move set_descriptive_type after
1943 (read_array_type): Remove type initialization. Recheck get_die_type
1944 after initial die_type. Move set_die_type before set_descriptive_type.
1945 (read_set_type): New variable domain_type. Recheck get_die_type after
1946 initial die_type. Move attr initialization later.
1947 (read_tag_pointer_type, read_tag_reference_type): New variable
1948 target_type. Recheck get_die_type after initial die_type.
1949 (read_tag_ptr_to_member_type): Recheck get_die_type after initial
1950 die_type and die_containing_type.
1951 (read_tag_const_type, read_tag_volatile_type, read_subroutine_type):
1952 Recheck get_die_type after initial die_type.
1953 (read_subrange_type): Recheck get_die_type after initial die_type.
1954 Move set_die_type before set_descriptive_type.
1955 (set_die_type): Extend the function comment. Call complaint if DIE has
1956 some type already set.
1958 2010-06-05 Vladimir Prus <vladimir@codesourcery.com>
1960 * mi/mi-main.c (mi_cmd_list_thread_groups): Adjust
1961 for current naming of thread groups (iN, not N).
1963 2010-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
1965 * ada-lang.c (ada_operator_length): Constify `struct expression'.
1966 * parse.c (operator_length): Likewise.
1967 (operator_length_standard): Likewise.
1968 * parser-defs.h (operator_length): Likewise.
1969 (operator_length_standard): Likewise.
1970 (struct exp_descriptor <operator_length>): Likewise.
1972 2010-06-04 Doug Evans <dje@google.com>
1974 Add support for enabling/disabling individual pretty-printers.
1975 * python/py-prettyprint.c (search_pp_list): Skip disabled printers.
1976 * python/python-internal.h (gdbpy_enabled_cst): Declare.
1977 * python/python.c (gdbpy_enabled_cst): Define.
1978 (_initialize_python): Initialize gdbpy_enabled_cst.
1981 2010-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1983 * breakpoint.c (update_global_location_list): Fix comment typo.
1985 2010-06-04 Hui Zhu <teawater@gmail.com>
1987 * dwarf2loc.c (disassemble_dwarf_expression): Change ul to l.
1989 2010-06-03 Doug Evans <dje@google.com>
1991 * configure.ac: Don't fail if python is unusable when
1992 configured with --with-python=auto.
1993 * configure: Regenerate.
1995 2010-06-03 Sami Wagiaalla <swagiaal@redhat.com>
1997 * dwarf2read.c (new_symbol): Remove redundant naming of symbol.
1999 2010-06-03 Pierre Muller <muller@ics.u-strasbg.fr>
2001 * valprint.h (get_array_bounds): Change low and high parameter types
2003 * valprint.c (get_array_bounds): Use get_discrete_bounds call to
2005 (val_print_array_elements): Adapt to change above.
2006 * ada-valprint.c (print_optional_low_bound): Adapt to change above.
2007 * p-valprint.c (pascal_val_print): Likewise.
2009 2010-06-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2011 * symfile.c (init_filename_language_table): New extensions .for, .FOR,
2012 .ftn, .FTN, .fpp, .FPP, .f90, .F90, .f95, .F95, .f03, .F03, .f08 and
2015 2010-06-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2017 Support DW_TAG_module as separate namespaces.
2018 * dwarf2read.c (typename_concat): New parameter physname.
2019 (read_module_type): New function and declaration.
2020 (scan_partial_symbols): Scan also DW_TAG_module children.
2021 (partial_die_parent_scope): Accept scope even from DW_TAG_module. Pass
2022 to typename_concat backward compatible physname value 0.
2023 (partial_die_full_name, read_namespace_type): Pass to typename_concat
2024 backward compatible physname value 0.
2025 (add_partial_module, read_module): Remove FIXME comment.
2026 (process_die) <DW_TAG_module>: Set PROCESSING_HAS_NAMESPACE_INFO.
2027 (die_needs_namespace) <DW_TAG_variable>: Allow returning true even for
2028 DIEs under DW_TAG_module.
2029 (dwarf2_compute_name): Move the ada block for DW_AT_linkage_name and
2030 DW_AT_MIPS_linkage_name first, extend it for language_fortran
2031 && physname and return there instead of just setting NAME. Extend
2032 the main block for language_fortran. Pass physname parameter to the
2033 typename_concat call.
2034 (read_import_statement, read_func_scope, get_scope_pc_bounds)
2035 (load_partial_dies, determine_prefix): Support also DW_TAG_module.
2036 (new_symbol): Fill in cplus_specific.demangled_name if it is still
2037 missing from SYMBOL_SET_NAMES in the language_fortran case.
2038 (new_symbol) <DW_TAG_variable>: Force LOC_UNRESOLVED for gfortran module
2040 (read_type_die) <DW_TAG_module>: New.
2041 (MAX_SEP_LEN): Increase to 7.
2042 (typename_concat): New parameter physname. New variable lead. Support
2043 also language_fortran.
2044 * f-exp.y (yylex): Consider : also as a symbol name character class.
2045 * f-lang.c: Include cp-support.h.
2046 (f_word_break_characters, f_make_symbol_completion_list): New functions.
2047 (f_language_defn): Use cp_lookup_symbol_nonlocal,
2048 f_word_break_characters and f_make_symbol_completion_list.
2049 * f-typeprint.c (f_type_print_base) <TYPE_CODE_MODULE>: New.
2050 * gdbtypes.h (enum type_code) <TYPE_CODE_MODULE>: New.
2051 * symtab.c (symbol_init_language_specific): Support language_fortran.
2052 (symbol_find_demangled_name): New comment on language_fortran.
2053 (symbol_natural_name, symbol_demangled_name): Use demangled_name even
2054 for language_fortran.
2055 (lookup_symbol_aux_local): Check imports also for language_fortran.
2056 (default_make_symbol_completion_list): Rename to ...
2057 (default_make_symbol_completion_list_break_on): ... this name. New
2058 parameter break_on, use it.
2059 (default_make_symbol_completion_list): New stub.
2060 * symtab.h (default_make_symbol_completion_list_break_on): New
2063 2010-06-02 Joel Brobecker <brobecker@adacore.com>
2065 * remote.c (remote_get_noisy_reply): Remove trailing "\n" in call
2068 2010-06-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2070 * dwarf2read.c (typename_concat): Add const to the variable sep.
2072 2010-06-02 Tom Tromey <tromey@redhat.com>
2074 * dwarf2loc.h (dwarf2_per_cu_data): Declare.
2075 * dwarf2read.c (dwarf_stack_op_name): No longer static. Return
2076 type is const. Add 'def' argument. Add missing operators, remove
2078 (decode_locdesc): Update.
2079 (dwarf2_always_disassemble): New global.
2080 (show_dwarf2_always_disassemble): New function.
2081 (_initialize_dwarf2_read): Add always-disassemble.
2082 (dwarf2_per_cu_offset_size): New function.
2083 * dwarf2loc.c (dwarf2_always_disassemble): Declare.
2084 (piece_end_p): New function.
2085 (locexpr_describe_location_piece): Replace 'size' argument with
2086 'end'. Use piece_end_p. Rewrite recognition of TLS. Recognize
2087 some constants. Remove errors.
2088 (disassemble_dwarf_expression): New function.
2089 (locexpr_describe_location_1): Use disassemble_dwarf_expression.
2090 Add 'offset_size' argument.
2091 (loclist_describe_location): Change output formatting.
2092 * dwarf2expr.h (dwarf_stack_op_name): Declare.
2094 2010-06-02 Sami Wagiaalla <swagiaal@redhat.com>
2096 * cp-support.c (make_symbol_overload_list_adl_namespace): Handle
2097 anonymous type case.
2099 2010-06-02 Pierre Muller <muller@ics.u-strasbg.fr>
2101 * dwarf2read.c (read_subrange_type): Handle missing base type
2102 according to Dwarf-2 specifications.
2104 2010-06-01 Sergio Durigan Junior <sergiodj@redhat.com>
2106 * expprint.c (print_subexp_standard): Remove exp_opcodes BINOP_INCL,
2108 (op_name_standard): Remove exp_opcodes BINOP_INCL, BINOP_EXCL,
2109 UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
2110 (dump_subexp_body_standard): Remove exp_opcodes BINOP_INCL,
2111 BINOP_EXCL, UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD,
2112 UNOP_CHMAX, UNOP_CHMIN.
2113 * expression.h (enum exp_opcode) <BINOP_INCL, BINOP_EXCL,
2114 UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD, UNOP_CHMAX,
2115 UNOP_CHMIN>: Remove opcodes.
2117 2010-06-01 Pierre Muller <muller@ics.u-strasbg.fr>
2119 * dwarf2read.c (read_func_scope): Do not complain for
2120 external function if bounds are not found.
2122 2010-06-01 Pedro Alves <pedro@codesourcery.com>
2124 * NEWS: Mention gdbserver fast tracepoints support.
2126 2010-05-31 Pierre Muller <muller@ics.u-strasbg.fr>
2128 * windows-nat.c (GetConsoleFontSize, GetCurrentConsoleFont):
2130 (windows_set_console_info): New function.
2131 (windows_create_inferior): Call windows_set_console_info
2132 if NEW_CONSOLE is true.
2133 (bad_GetCurrentConsoleFont, bad_GetConsoleFontSize): New functions.
2134 (_initialize_loadable): Initialize GetConsoleFontSize and
2135 GetCurrentConsoleFont.
2137 2010-05-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2139 * Makefile.in (RDYNAMIC): New.
2140 (SFILES): Add proc-service.list.
2141 * config/alpha/alpha-linux.mh (NAT_CDEPS): New.
2142 (LOADLIBES): Replace -rdynamic by $(RDYNAMIC).
2143 * config/arm/linux.mh: Likewise.
2144 * config/i386/linux.mh: Likewise.
2145 * config/i386/linux64.mh: Likewise.
2146 * config/ia64/linux.mh: Likewise.
2147 * config/m32r/linux.mh: Likewise.
2148 * config/m68k/linux.mh: Likewise.
2149 * config/mips/linux.mh: Likewise.
2150 * config/pa/linux.mh: Likewise.
2151 * config/powerpc/linux.mh: Likewise.
2152 * config/powerpc/ppc64-linux.mh: Likewise.
2153 * config/s390/s390.mh: Likewise.
2154 * config/sparc/linux.mh: Likewise.
2155 * config/sparc/linux64.mh: Likewise.
2156 * config/xtensa/linux.mh: Likewise.
2157 * configure.ac: New RDYNAMIC on native host and GCC.
2158 (solaris*): Replace -Wl,-export-dynamic by $RDYNAMIC.
2159 * configure: Regenerate.
2160 * proc-service.list: New.
2162 2010-05-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2164 * linux-nat.c (linux_nat_core_of_thread_1): Fix crash on invalid
2167 2010-05-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2169 * linux-nat.c (linux_nat_wait_1): Do not call
2170 linux_nat_core_of_thread_1 on TARGET_WAITKIND_EXITED or
2171 TARGET_WAITKIND_SIGNALLED.
2173 2010-05-27 Joel Brobecker <brobecker@adacore.com>
2175 * ada-lang.c (ada_inferior_data): New struct.
2176 (ada_inferior_data): New static global.
2177 (ada_inferior_data_cleanup, get_ada_inferior_data, ada_inferior_exit)
2178 (ada_get_tsd_type): New functions.
2179 (ada_tag_name_2): Use ada_get_tsd_type instead of ada_find_any_type
2180 to look the tsd type up.
2181 (_initialize_ada_language): Attach ada_inferior_exit to inferior_exit
2182 event. Set ada_inferior_data.
2184 2010-05-27 Pedro Alves <pedro@codesourcery.com>
2186 * remote.c (unpack_varlen_hex): Remove forward declaration.
2187 (remote_console_output): Make static, and add forward declaration.
2188 * remote.h: Drop FIXME comment.
2189 (unpack_varlen_hex): Declare.
2190 (remote_console_output, remote_cisco_objfile_relocate)
2191 (deprecated_target_resume_hook, deprecated_target_wait_loop_hook):
2192 Delete declarations.
2193 * tracepoint.c: Include "remote.h".
2194 (unpack_varlen_hex): Delete declaration.
2196 2010-05-27 Tom Tromey <tromey@redhat.com>
2198 * dwarf2loc.c (struct piece_closure) <refc>: New field.
2199 (allocate_piece_closure): Initialize refc.
2200 (copy_pieced_value_closure): Use refc.
2201 (free_pieced_value_closure): Likewise.
2203 2010-05-27 Tom Tromey <tromey@redhat.com>
2205 * arm-tdep.c (push_stack_item): 'contents' now const.
2206 (arm_push_dummy_call): Make 'val' const. Use value_contents, not
2207 value_contents_writeable. Introduce new temporary.
2209 2010-05-27 Tom Tromey <tromey@redhat.com>
2211 * findcmd.c (parse_find_args): Use value_contents, not
2214 2010-05-27 Tom Tromey <tromey@redhat.com>
2216 * alpha-tdep.c (alpha_push_dummy_call): Make alpha_arg.contents
2217 const. Use value_contents, not value_contents_writeable.
2219 2010-05-27 Joel Brobecker <brobecker@adacore.com>
2221 * ada-lang.c (ensure_lval): Replace call to value_contents_raw
2222 by call to value_contents.
2224 2010-05-27 Ozkan Sezer <sezeroz@gmail.com>
2226 * MAINTAINERS: Add myself for write after approval privileges.
2228 2010-05-26 Doug Evans <dje@google.com>
2230 Allow python to find its files if moved from original location.
2231 * acinclude.m4 (GDB_AC_DEFINE_RELOCATABLE): New function.
2232 (GDB_AC_WITH_DIR): Call it.
2233 * configure.ac: Define WITH_PYTHON_PATH if we can find the
2234 python installation directory.
2235 * config.in: Regenerate.
2236 * configure: Regenerate.
2237 * defs.h (python_libdir): Declare.
2238 * main.c (python_libdir): Define.
2239 (captured_main): Initialize python_libdir.
2240 * python/python.c (_initialize_python): #ifdef WITH_PYTHON_PATH,
2241 call Py_SetProgramName to make sure python can find its libraries
2244 * configure.ac: Try to use python's distutils to fetch compilation
2246 * configure: Regenerate.
2247 * python/python-config.py: New file.
2249 2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
2251 * ser-tcp.c (net_open): Check error return from socket() call by its
2252 equality to -1 not by it being negative.
2253 (net_close): Likewise.
2255 2010-05-26 Pedro Alves <pedro@codesourcery.com>
2257 * NEWS: Mention the `qRelocInsn' feature.
2258 * gdbarch.sh (relocate_instruction): New.
2259 * amd64-tdep.c (rip_relative_offset): New.
2260 (append_insns): New.
2261 (amd64_relocate_instruction): New.
2262 (amd64_init_abi): Install it.
2263 * i386-tdep.c (append_insns): New.
2264 (i386_relocate_instruction): New.
2265 (i386_gdbarch_init): Install it.
2266 * remote.c (remote_get_noisy_reply): Handle qRelocInsn requests.
2267 * gdbarch.h, gdbarch.c: Regenerate.
2269 2010-05-26 Tom Tromey <tromey@redhat.com>
2271 * dwarf2loc.h (struct dwarf2_locexpr_baton) <data>: Now const.
2272 (struct dwarf2_loclist_baton) <data>: Likewise.
2273 * dwarf2loc.c (find_location_expression): Constify return type.
2274 (dwarf2_evaluate_loc_desc): Make 'data' argument const.
2275 (dwarf2_loc_desc_needs_frame): Likewise.
2276 (loclist_read_variable): Constify.
2277 (loclist_describe_location): Likewise.
2278 (loclist_tracepoint_var_ref): Likewise.
2280 2010-05-25 Tom Tromey <tromey@redhat.com>
2282 * dwarf2loc.c (dwarf_expr_frame_base): Constify.
2283 (dwarf_expr_frame_base_1): Likewise.
2284 (read_pieced_value): Update.
2285 (needs_frame_frame_base): Constify.
2286 (dwarf2_tracepoint_var_loc): Likewise.
2287 (dwarf2_tracepoint_var_access): Likewise.
2288 (locexpr_describe_location_piece): Likewise.
2289 (locexpr_describe_location_1): Likewise.
2290 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_base>:
2293 (struct dwarf_expr_piece) <v.literal.data>: Likewise.
2294 (dwarf_expr_eval, read_uleb128, read_sleb128)
2295 (dwarf2_read_address): Update.
2296 * dwarf2expr.c (dwarf_expr_eval): Constify.
2297 (read_uleb128): Likewise.
2298 (read_sleb128): Likewise.
2299 (dwarf2_read_address): Likewise.
2300 (require_composition): Likewise.
2301 (execute_stack_op): Likewise.
2302 * dwarf2-frame.h (struct dwarf2_frame_state_reg) <loc.exp>: Now a
2304 * dwarf2-frame.c (struct dwarf2_frame_state_reg_info) <cfa_exp>:
2306 (no_get_frame_base): Constify.
2307 (execute_stack_op): Likewise.
2308 (execute_cfa_program): Likewise.
2309 (read_encoded_value): Likewise.
2311 2010-05-25 Doug Evans <dje@google.com>
2313 * ser-pipe.c (pipe_open): Ignore SIGINTs in child.
2315 * event-loop.h (GDB_READABLE, GDB_WRITABLE, GDB_EXCEPTION): Move to ...
2316 * event-loop.c: ... here.
2317 * tui/tui-io.c (tui_readline_output): Rename parameter `code' to
2318 `error' for clarity.
2319 (tui_getc): Pass correct value for `error' parameter to
2320 tui_readline_output.
2322 Add python gdb.GdbError and gdb.string_to_argv.
2323 * NEWS: Document them.
2324 * python/py-cmd.c (cmdpy_function): Don't print a traceback if
2325 the exception is gdb.GdbError. Print a second traceback if there's
2326 an error computing the error message.
2327 (gdbpy_string_to_argv): New function.
2328 * python/py-utils.c (gdbpy_obj_to_string): New function.
2329 (gdbpy_exception_to_string): New function.
2330 * python/python-internal.h (gdbpy_string_to_argv): Declare.
2331 (gdbpy_obj_to_string, gdbpy_exception_to_string): Declare.
2332 (gdbpy_gdberror_exc): Declare.
2333 * python/python.c (gdbpy_gdberror_exc): New global.
2334 (_initialize_python): Initialize gdbpy_gdberror_exc and create
2336 (GdbMethods): Add string_to_argv.
2338 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
2340 * windows-nat.c (display_selector): Call GetLastError to give better
2341 failure explanation.
2343 2010-05-24 Pedro Alves <pedro@codesourcery.com>
2345 * config.in: Regenerate.
2347 2010-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2350 * target.c (push_target): Return only void. Remove the return value
2352 * target.h (push_target): Return only void.
2354 2010-05-23 Pedro Alves <pedro@codesourcery.com>
2356 Update gnulib from latest git.
2357 (250b80067c1e1d8faa0c42fb572f721975b929c5)
2359 * gnulib/memcmp.c: Removed.
2360 * gnulib/memchr.valgrind: New.
2361 * gnulib/stddef.in.h: New.
2362 * gnulib/Makefile.am: Updated.
2363 * gnulib/memchr.c: Updated.
2364 * gnulib/memmem.c: Updated.
2365 * gnulib/stdint.in.h: Updated.
2366 * gnulib/str-two-way.h: Updated.
2367 * gnulib/string.in.h: Updated.
2368 * gnulib/wchar.in.h: Updated.
2370 * gnulib/extra/link-warning.h: Removed.
2371 * gnulib/extra/c++defs.h: New.
2372 * gnulib/extra/warn-on-use.h: New.
2373 * gnulib/extra/arg-nonnull.h: Updated.
2375 * gnulib/m4/extensions.m4: Updated.
2376 * gnulib/m4/gnulib-cache.m4: Updated.
2377 * gnulib/m4/gnulib-common.m4: Updated.
2378 * gnulib/m4/gnulib-comp.m4: Updated.
2379 * gnulib/m4/gnulib-tool.m4: Updated.
2380 * gnulib/m4/include_next.m4: Updated.
2381 * gnulib/m4/longlong.m4: Updated.
2382 * gnulib/m4/memchr.m4: Updated.
2383 * gnulib/m4/memmem.m4: Updated.
2384 * gnulib/m4/stdint.m4: Updated.
2385 * gnulib/m4/string_h.m4: Updated.
2386 * gnulib/m4/memcmp.m4: Removed.
2387 * gnulib/m4/onceonly_2_57.m4: Removed.
2388 * gnulib/m4/00gnulib.m4: New.
2389 * gnulib/m4/mmap-anon.m4: New.
2390 * gnulib/m4/multiarch.m4: New.
2391 * gnulib/m4/onceonly.m4: New.
2392 * gnulib/m4/stddef_h.m4: New.
2393 * gnulib/m4/warn-on-use.m4: New.
2394 * gnulib/m4/wchar.m4: Removed.
2395 * gnulib/m4/wchar_h.m4: New.
2396 * gnulib/m4/wchar_t.m4: New.
2397 * gnulib/m4/wint_t.m4: New.
2399 * aclocal.m4: Regenerate.
2400 * config.in: Likewise.
2401 * configure: Likewise.
2402 * gnulib/Makefile.in: Likewise.
2404 2010-05-21 Tom Tromey <tromey@redhat.com>
2406 * dwarf2loc.c (extract_bits_primitive): New function.
2407 (extract_bits): Likewise.
2408 (insert_bits): Likewise.
2409 (copy_bitwise): Likewise.
2410 (read_pieced_value): Do all operations in bits.
2411 (write_pieced_value): Likewise.
2412 * dwarf2expr.h (struct dwarf_expr_piece) <offset>: New field.
2413 * dwarf2expr.c (add_piece): New arguments bit_piece, offset.
2414 Always use xrealloc to resize piece array.
2415 (execute_stack_op) <DW_OP_reg0>: Handle DW_OP_bit_piece.
2416 <DW_OP_piece>: Update.
2417 <DW_OP_bit_piece>: New case.
2419 2010-05-21 Tom Tromey <tromey@redhat.com>
2421 * dwarf2loc.c (read_pieced_value): Exit loop when result is full.
2422 <DWARF_VALUE_OPTIMIZED_OUT>: New case.
2423 * dwarf2expr.h (enum dwarf_value_location)
2424 <DWARF_VALUE_OPTIMIZED_OUT>: New constant.
2425 * dwarf2expr.c (dwarf_expr_stack_empty_p): New function.
2426 (add_piece): Handle empty piece.
2427 (execute_stack_op) <DW_OP_piece>: Handle
2428 DWARF_VALUE_OPTIMIZED_OUT.
2430 2010-05-21 Tom Tromey <tromey@redhat.com>
2432 * eval.c (evaluate_subexp_standard) <BINOP_SUBSCRIPT>: Call
2433 evaluate_subexp, not evaluate_subexp_with_coercion.
2435 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
2437 * dwarf2read.c (new_symbol): Handle DW_AT_variable_parameter
2440 2010-05-21 Tom Tromey <tromey@redhat.com>
2442 * dwarf2loc.c (read_pieced_value): Work properly when 'v' has an
2444 (write_pieced_value): Likewise.
2446 2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
2448 * dwarf2read.c (process_die): Also allow DW_TAG_const_type
2449 and DW_TAG_volatile_type.
2450 (new_symbol): Likewise.
2452 2010-05-20 Pierre Muller <muller@ics.u-strasbg.fr>
2454 * p-valprint.c (pascal_val_print): Call get_array_bounds
2455 to obtain the number of elements in an array.
2457 2010-05-19 Doug Evans <dje@google.com>
2459 * python.c (gdbpy_print_stack): Ensure output ends with a newline.
2461 * python.c (source_python_script): Add comment.
2462 (source_python_script_for_objfile): Remove unnecessary call to
2465 2010-05-18 Jan Kratochvil <jan.kratochvil@redhat.com>
2466 Sergio Durigan Junior <sergiodj@redhat.com>
2469 * parse.c (exp_iterate): Use operator_length wrapper function.
2471 2010-05-18 Michael Snyder <msnyder@vmware.com>
2473 * ada-lang.c: White space.
2474 * ada-typeprint.c: White space.
2475 * ada-valprint.c: White space.
2476 * addrmap.c: White space.
2477 * auxv.c: White space.
2478 * ax-gdb.c: White space.
2480 2010-05-18 Hui Zhu <teawater@gmail.com>
2482 * linux-fork.c (inferior_call_waitpid_cleanup): Add check
2484 (inferior_call_waitpid): Move make_cleanup out of check.
2485 Check the return of waitpid.
2486 (delete_checkpoint_command): Add pptid to save fi->parent_ptid.
2488 2010-05-17 Michael Snyder <msnyder@vmware.com>
2490 * tui/tui.c: White space.
2491 * tui/tui-data.c: White space.
2492 * tui/tui-disasm.c: White space.
2493 * tui/tui-file.c: White space.
2494 * tui/tui-interp.c: White space.
2495 * tui/tui-main.c: White space.
2496 * tui/tui-out.c: White space.
2497 * tui/tui-regs.c: White space.
2498 * tui/tui-source.c: White space.
2499 * tui/tui-stack.c: White space.
2500 * tui/tui-win.c: White space.
2501 * tui/tui-winsource.c: White space.
2503 * procfs.c: White space.
2505 * python/py-auto-load.c: White space.
2506 * python/py-block.c: White space.
2507 * python/py-breakpoint.c: White space.
2508 * python/py-cmd.c: White space.
2509 * python/py-function.c: White space.
2510 * python/py-lazy-string.c: White space.
2511 * python/py-objfile.c: White space.
2512 * python/py-param.c: White space.
2513 * python/py-prettyprint.c: White space.
2514 * python/py-progspace.c: White space.
2515 * python/py-symtab.c: White space.
2516 * python/python.c: White space.
2517 * python/py-type.c: White space.
2518 * python/py-utils.c: White space.
2519 * python/py-value.c: White space.
2521 * mi/mi-cmd-break.c: White space.
2522 * mi/mi-cmd-env.c: White space.
2523 * mi/mi-cmds.c: White space.
2524 * mi/mi-cmd-stack.c: White space.
2525 * mi/mi-cmd-var.c: White space.
2526 * mi/mi-console.c: White space.
2527 * mi/mi-getopt.c: White space.
2528 * mi/mi-interp.c: White space.
2529 * mi/mi-main.c: White space.
2530 * mi/mi-out.c: White space.
2531 * mi/mi-parse.c: White space.
2533 * cli/cli-cmds.c: White space.
2534 * cli/cli-decode.c: White space.
2535 * cli/cli-dump.c: White space.
2536 * cli/cli-interp.c: White space.
2537 * cli/cli-logging.c: White space.
2538 * cli/cli-script.c: White space.
2539 * cli/cli-setshow.c: White space.
2541 * valarith.c: White space.
2542 * valops.c: White space.
2543 * valprint.c: White space.
2544 * value.c: White space.
2545 * varobj.c: White space.
2546 * xcoffread.c: White space.
2547 * xml-support.c: White space.
2548 * xml-tdesc.c: White space.
2550 2010-05-17 Andreas Schwab <schwab@redhat.com>
2553 * c-lang.c (c_printstr): Compute real length of NUL terminated
2556 2010-05-17 Joel Brobecker <brobecker@adacore.com>
2558 * parse.c (parse_exp_in_context): When block is not NULL, use
2559 its associated language to parse the expression instead of
2560 the current_language.
2562 2010-05-17 Joel Brobecker <brobecker@adacore.com>
2564 * jv-lang.c (java_lookup_class): Remove commented out code.
2565 (type_from_class): Likewise.
2566 (java_op_print_tab): Remove commented-out elements.
2568 2010-05-17 Joel Brobecker <brobecker@adacore.com>
2570 * ada-lang.c (to_fixed_range_type): The the raw index type as
2571 argument instead of the raw type name. Remove orig_type parameter.
2572 Update calls throughout.
2573 (ada_fixup_array_indexes_type): New function.
2574 (ada_array_bound_from_type): Add call to ada_fixup_array_indexes_type.
2575 * ada-lang.h (ada_fixup_array_indexes_type): Add declaration.
2576 * ada-typeprint.c (print_range_type): Renames print_range_type_named.
2577 Remove name parameter.
2578 (print_array_type): Add call to ada_fixup_array_indexes_type.
2579 Update calls to print_range_type.
2580 (ada_print_type): Update calls to print_range_type.
2582 2010-05-17 Pierre Muller <muller@ics.u-strasbg.fr>
2584 * dwarf2read.c (read_set_type): Set type length if
2585 DW_AT_byte_size attribute is present.
2587 2010-05-17 Pierre Muller <muller@ics.u-strasbg.fr>
2589 * p-valprint.c (pascal_val_print): Handle set type if range limits
2590 are undefined but size is known.
2592 2010-05-17 Pedro Alves <pedro@codesourcery.com>
2594 * procfs.c: Reformat.
2596 2010-05-16 Michael Snyder <msnyder@vmware.com>
2598 * target.c: White space.
2599 * target-descriptions.c: White space.
2600 * target-memory.c: White space.
2601 * thread.c: White space.
2602 * top.c: White space.
2603 * tracepoint.c: White space.
2604 * trad-frame.c: White space.
2605 * tramp-frame.c: White space.
2606 * ui-file.c: White space.
2607 * ui-out.c: White space.
2608 * user-regs.c: White space.
2609 * utils.c: White space.
2611 * scm-exp.c: White space.
2612 * scm-lang.c: White space.
2613 * scm-valprint.c: White space.
2614 * sentinel-frame.c: White space.
2615 * ser-base.c: White space.
2616 * ser-go32.c: White space.
2617 * serial.c: White space.
2618 * ser-mingw.c: White space.
2619 * ser-pipe.c: White space.
2620 * ser-tcp.c: White space.
2621 * ser-unix.c: White space.
2622 * solib.c: White space.
2623 * solib-darwin.c: White space.
2624 * solib-frv.c: White space.
2625 * solib-irix.c: White space.
2626 * solib-osf.c: White space.
2627 * solib-pa64.c: White space.
2628 * solib-som.c: White space.
2629 * solib-spu.c: White space.
2630 * solib-svr4.c: White space.
2631 * solib-target.c: White space.
2632 * source.c: White space.
2633 * stabsread.c: White space.
2634 * stack.c: White space.
2635 * std-regs.c: White space.
2636 * symfile.c: White space.
2637 * symmisc.c: White space.
2638 * symtab.c: White space.
2640 2010-05-16 Michael Snyder <msnyder@vmware.com>
2642 * source.c (_initialize_source): Add "rev" as an abbreviation
2643 for the "reverse-search" command.
2645 2010-05-16 Michael Snyder <msnyder@vmware.com>
2647 * record.c: White space.
2648 * regcache.c: White space.
2649 * reggroups.c: White space.
2650 * remote-fileio.c: White space.
2651 * remote-m32r-sdi.c: White space.
2652 * remote-mips.c: White space.
2653 * remote-sim.c: White space.
2654 * remote.c: White space.
2655 (process_g_packet): Remove orphan braces.
2657 2010-05-15 Michael Snyder <msnyder@vmware.com>
2659 * parse.c: White space.
2660 * p-lang.c: White space.
2661 * posix-hdep.c: White space.
2662 * printcmd.c: White space.
2663 * progspace.c: White space.
2664 * prologue-value.c: White space.
2665 * psymtab.c: White space.
2666 * p-typeprint.c: White space.
2667 * p-valprint.c: White space.
2669 * objc-lang.c: White space.
2670 * objfiles.c: White space.
2671 * observer.c: White space.
2672 * osabi.c: White space.
2673 * osdata.c: White space.
2675 * m2-lang.c: White space.
2676 * m2-valprint.c: White space.
2677 * macrocmd.c: White space.
2678 * macroexp.c: White space.
2679 * macroscope.c: White space.
2680 * macrotab.c: White space.
2681 * main.c: White space.
2682 * maint.c: White space.
2683 * mdebugread.c: White space.
2684 * memattr.c: White space.
2685 * minsyms.c: White space.
2686 * monitor.c: White space.
2688 2010-05-14 Michael Snyder <msnyder@vmware.com>
2690 * jv-lang.c: White space.
2691 * jv-typeprint.c: White space.
2692 * jv-valprint.c: White space.
2693 * language.c: White space.
2694 * libunwind-frame.c: White space.
2695 * linespec.c: White space.
2696 * linux-nat.c: White space.
2697 * linux-record.c: White space.
2698 * linux-thread-db.c: White space.
2700 * infcall.c: White space.
2701 * inf-child.c: White space.
2702 * infcmd.c: White space.
2703 * inferior.c: White space.
2704 * inf-loop.c: White space.
2705 * inflow.c: White space.
2706 * inline-frame.c: White space.
2707 * interps.c: White space.
2709 * gcore.c: White space.
2710 * gdb.c: White space.
2711 * gdbtypes.c: White space.
2712 * gnu-nat.c: White space.
2713 * gnu-v2-abi.c: White space.
2714 * gnu-v3-abi.c: White space.
2716 * findcmd.c: White space.
2717 * findvar.c: White space.
2718 * fork-child.c: White space.
2719 * frame-base.c: White space.
2720 * frame.c: White space.
2721 * frame-unwind.c: White space.
2722 * f-valprint.c: White space.
2724 * elfread.c: White space.
2725 * environ.c: White space.
2726 * eval.c: White space.
2727 * event-loop.c: White space.
2728 * event-top.c: White space.
2729 * exceptions.c: White space.
2730 * exec.c: White space.
2731 * expprint.c: White space.
2733 * dbxread.c: White space.
2734 * dcache.c: White space.
2735 * disasm.c: White space.
2736 * doublest.c: White space.
2737 * dsrec.c: White space.
2738 * dummy-frame.c: White space.
2739 * dwarf2expr.c: White space.
2740 * dwarf2-frame.c: White space.
2741 * dwarf2loc.c: White space.
2742 * dwarf2read.c: White space.
2744 2010-05-14 Phil Muldoon <pmuldoon@redhat.com>
2748 * python/py-value.c (valpy_hash): New function.
2749 (value_object_type): Register valpy_hash.
2751 2010-05-14 Hui Zhu <teawater@gmail.com>
2752 Michael Snyder <msnyder@vmware.com>
2754 * linux-fork.c (gdbthread.h): New include.
2755 (fork_info): Add parent_ptid.
2756 (inferior_call_waitpid_cleanup, inferior_call_waitpid): New
2758 (delete_checkpoint_command): Call inferior_call_waitpid.
2759 (checkpoint_command): Set parent_ptid.
2761 2010-05-13 Michael Snyder <msnyder@vmware.com>
2763 * dictionary.c: Re-indent to GNU coding standard.
2765 * charset.c: White space.
2766 * c-lang.c: White space.
2767 * cli-out.c: White space.
2768 * coffread.c: White space.
2769 * complaints.c: White space.
2770 * completer.c: White space.
2771 * corefile.c: White space.
2772 * corelow.c: White space.
2773 * cp-abi.c: White space.
2774 * cp-namespace.c: White space.
2775 * cp-support.c: White space.
2776 * cp-valprint.c: White space.
2777 * c-typeprint.c: White space.
2778 * c-valprint.c: White space.
2779 * blockframe.c: White space.
2780 * breakpoint.c: White space.
2781 * buildsym.c: White space.
2782 * blockframe.c: White space.
2783 * bcache.c: White space.
2784 * gdbarch.sh: White space, add blank lines.
2785 * arch-utils.c: Ditto.
2786 * gdbarch.c: Regenerate.
2787 * frame.c: White space, add blank lines.
2788 * stack.c: White space, add blank lines.
2789 (initialize_stack): Remove long-dead code.
2791 2010-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2794 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Change the parameter to type.
2795 (locexpr_read_variable, loclist_read_variable): Update the callers.
2797 2010-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2800 * dwarf2read.c (die_type, die_descriptive_type): Remove variable type.
2801 Remove check of NULL returned by tag_type_to_type.
2802 (die_containing_type): Remove variable type. Remove type_die variable
2803 initialization. Remove check of NULL returned by tag_type_to_type.
2805 2010-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
2808 * gdbtypes.c (lookup_struct_elt_type): Also lookup
2809 names of unnamed structures or unions.
2811 2010-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
2813 * procfs.c (proc_watchpoint_address): New function.
2814 (procfs_stopped_by_watchpoint): Remove useless check after
2815 find_procinfo_or_die call.
2816 (procfs_stopped_data_address): New function.
2817 (procfs_use_watchpoints): Register new watchpoint related function.
2819 2010-05-11 Tom Tromey <tromey@redhat.com>
2821 * eval.c (evaluate_subexp_standard): Revert inadvertent change.
2823 2010-05-10 Michael Snyder <msnyder@vmware.com>
2825 * utils.c: White space cleanup.
2827 2010-05-10 Tom Tromey <tromey@redhat.com>
2829 * eval.c (ptrmath_type_p): Add 'lang' argument.
2830 (evaluate_subexp_standard): Update.
2831 (evaluate_subexp_with_coercion): Update.
2832 * language.h (CAST_IS_CONVERSION): Add 'LANG' argument.
2834 2010-05-10 Michael Snyder <msnyder@vmware.com>
2836 * utils.c (do_fclose_cleanup) Restore local variable.
2838 2010-05-09 Doug Evans <dje@google.com>
2840 * record.c (init_record_core_ops): Rename record_core to record-core.
2842 2010-05-08 Joel Brobecker <brobecker@adacore.com>
2844 Implement task switching on pa-hpux.
2845 * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): New function.
2846 (inf_ttrace_target): Set t->to_get_ada_task_ptid.
2848 2010-05-08 Pierre Muller <muller@ics.u-strasbg.fr>
2850 * valops.c (find_overload_match): Add missing i18n markup.
2852 2010-05-08 Pierre Muller <muller@ics.u-strasbg.fr>
2854 * p-exp.y (exp : SIZEOF '(' exp ')'): New rule.
2856 2010-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2858 * dwarf2read.c (typename_concat): Use (char *) NULL terminated stdarg
2859 list for the obconcat call.
2860 * mdebugread.c (parse_symbol): Likewise.
2861 * stabsread.c (define_symbol, read_member_functions, read_cpp_abbrev):
2863 * symfile.c (obconcat): Replace the s1, s2 and s3 parameters by `...'.
2864 New variable ap. Remove variables len and val.
2865 * symfile.h (obconcat): Likewise for the prototype.
2867 2010-05-07 Michael Snyder <msnyder@vmware.com>
2869 * python/python.c (execute_gdb_command): Remove unused variables.
2870 * python/py-block.c (gdbpy_block_for_pc): Remove unused variable.
2871 * python/py-breakpoint.c (gdbpy_breakpoint_created):
2872 Remove unused variable.
2873 * python/py-cmd.c (cmdpy_function): Remove unused variable.
2874 (cmdpy_completer): Remove unused variable.
2875 * python/py-frame.c (frapy_find_sal): Remove unused variable.
2876 * python/py-function.c (fnpy_call): Remove unused variable.
2877 * python/py-objfile.c (objfile_to_objfile_object):
2878 Remove unused variable.
2879 * python/py-param.c (parmpy_init): Remove unused variable.
2880 * python/py-prettyprint.c (apply_varobj_pretty_printer):
2881 Remove unused variable.
2882 (gdbpy_default_visualizer): Remove unused variable.
2883 * python/py-progspace.c (pspace_to_pspace_object):
2884 Remove unused variable.
2885 * python/py-symtab.c (symtab_and_line_to_sal_object):
2886 Remove unused variable.
2887 * python/py-type.c (typy_template_argument):
2888 Remove unused variable.
2889 * python/py-value.c (valpy_string): Remove unused variable.
2890 (convert_value_from_python): Remove unused variables.
2892 2010-05-07 Michael Snyder <msnyder@vmware.com>
2894 * valops.c (value_cast_pointers): Restore unused variable 'type1',
2895 and use it to compute variable 't1'.
2897 2010-05-07 Joel Brobecker <brobecker@adacore.com>
2899 * ada-lang.c (assign_aggregate): Remove unused variable.
2901 2010-05-07 Sami Wagiaalla <swagiaal@redhat.com>
2904 * valops.c (find_overload_match): Handle fsym == NULL case.
2905 Add int no_adl argument.
2906 (find_oload_champ_namespace_loop): Call make_symbol_overload_list_adl
2908 Add int no_adl argument.
2909 (find_oload_champ_namespace): Add int no_adl argument.
2910 * parse.c (operator_length_standard): Return length for OP_ADL_FUNC
2912 * expprint.c (op_name_standard): Added string for OP_ADL_FUNC case.
2913 * eval.c (evaluate_subexp_standard): Added OP_ADL_FUNC case.
2914 Evaluate arguments and use them to perform ADL lookup.
2915 Pass no_adl argument to find_overload_match.
2916 Disable adl lookup when evaluating a fully qualified OP_FUNCALL.
2917 * cp-support.h: Added prototype for
2918 make_symbol_overload_list_namespace.
2919 * cp-support.c (make_symbol_overload_list_namespace): New function.
2920 (make_symbol_overload_list_adl_namespace): New function.
2921 (make_symbol_overload_list_adl): New function.
2922 (make_symbol_overload_list_using): Moved code to add function to
2923 overload set to make_symbol_overload_list_namespace.
2924 * c-exp.y: create UNKNOWN_CPP_NAME token.
2925 Add parse rule for ADL functions.
2926 (classify_name): Recognize an UNKNOWN_CPP_NAME.
2928 2010-05-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2930 * fbsd-nat.c (fbsd_make_corefile_notes): Add cast to NULL used as
2933 2010-05-07 Joel Brobecker <brobecker@adacore.com>
2935 Implement task switching on solaris targets.
2936 * sol-thread.c (thread_db_find_thread_from_tid)
2937 (sol_get_ada_task_ptid): New functions.
2938 (init_sol_thread_ops): Set sol_thread_ops.to_get_ada_task_ptid.
2940 2010-05-07 Pedro Alves <pedro@codesourcery.com>
2942 * remote.c (remote_query_supported_append): Use reconcat.
2943 (remote_query_supported): Install a cleanup. Use reconcat.
2945 2010-05-07 Pedro Alves <pedro@codesourcery.com>
2947 * gdbarch.sh (qsupported): Delete.
2948 * gdbarch.h, gdbarch.c: Regenerate.
2949 * remote.c (remote_query_supported): Remove use of
2952 2010-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
2954 * xml-syscall.c (syscall_start_syscalls_info): Remove unused
2957 2010-05-06 Michael Snyder <msnyder@vmware.com>
2959 * xml-support.c (xinclude_start_include): Delete unused variable.
2960 (xml_process_xincludes): Delete unused variable.
2961 * xml-syscall.c (syscall_parse_xml): Delete unused variable.
2962 * target-descriptions.c (tdesc_gdb_type): Delete unused variable.
2963 (tdesc_find_arch_register): Delete unused variable.
2964 (tdesc_use_registers): Delete unused variable.
2965 * xml-tdesc.c (tdesc_start_target): Delete unused variable.
2966 * inferior.c (print_inferior): Delete unused variable.
2967 * record.c (record_open_1): Delete unused variable.
2968 (record_restore): Delete unused variable.
2969 (cmd_record_save): Delete unused variable.
2970 * gcore.c (derive_heap_segment): Delete unused variable.
2971 (objfile_find_memory_regions): Use unused variable.
2972 * jit.c (jit_inferior_init): Delete unused variable.
2973 * progspace.c (clone_program_space): Delete unused variable.
2974 (pspace_empty_p): Delete unused variable.
2976 * frame-unwind.c (frame_unwind_find_by_frame):
2977 Delete unused variable.
2978 * gnu-v2-abi.c (gnuv2_value_rtti_type): Delete unused variable.
2979 * cp-support.c (mangled_name_to_comp): Delete unused variable.
2980 (method_name_from_physname): Delete unused variable.
2981 (cp_func_name): Delete unused variable.
2982 (cp_validate_operator): Delete unused variable.
2983 * cp-namespace.c (cp_scan_for_anonymous_namespaces):
2984 Delete unused variable.
2985 * trad-frame.c (trad_frame_get_prev_register):
2986 Delete unused variable.
2987 * tramp-frame.c (tramp_frame_cache): Delete unused variable.
2989 * serial.c (serial_for_fd): Delete unused variable.
2990 * mdebugread.c (psymtab_to_symtab_1): Delete unused variable.
2991 * top.c (execute_command): Delete unused variable.
2992 (init_main): Delete unused variable.
2993 * utils.c (do_fclose_cleanup): Delete unused variable.
2994 (do_all_inferior_continuations): Delete unused variable.
2995 (initialize_utils): Delete unused variable.
2996 (internal_problem_mode): Delete unused global.
2997 * frame.c (get_prev_frame): Delete unused global.
2998 (get_frame_locals_address): Delete unused global.
2999 (get_frame_args_address): Delete unused global.
3001 * p-typeprint.c (pascal_type_print_base): Delete unused variable.
3002 (pascal_type_print_varspec_prefix): Delete unused variable.
3003 * f-typeprint.c (f_type_print_base): Delete unused variable.
3004 (f_type_print_varspec_suffix): Delete unused variable.
3005 * m2-typeprint.c (m2_print_type): Delete unused variable.
3006 (m2_long_set): Delete unused variable.
3007 * ada-valprint.c (ada_val_print_1): Delete unused variable.
3008 * d-valprint.c (dynamic_array_type): Delete unused variable.
3009 * f-valprint.c (f77_get_dynamic_length_of_aggregate):
3010 Delete unused variable.
3011 (f77_create_arrayprint_offset_tbl): Delete unused variable.
3012 * m2-valprint.c (m2_val_print): Delete unused variable.
3014 * ui-out.c (ui_out_field_int): Delete unused variable.
3015 (ui_out_field_fmt_int): Delete unused variable.
3016 * varobj.c (varobj_list_children): Delete unused variable.
3017 (varobj_set_value): Delete unused variable.
3018 (install_new_value_visualizer): Delete unused variable.
3019 (varobj_set_visualizer): Delete unused variable.
3020 (varobj_update): Delete unused variable.
3021 (varobj_editable_p): Delete unused variable.
3022 (c_value_of_root): Delete unused variable.
3023 (cplus_describe_child): Delete unused variable.
3025 * ada-lang.c (add_defn_to_vec): Delete unused variable.
3026 (decode_constrained_packed_array_type): Delete unused variable.
3027 (add_defn_to_vec): Delete unused variable.
3028 (symbol_completion_match): Delete unused variable.
3029 (value_tag_from_contents_and_address): Delete unused variable.
3030 (ada_evaluate_subexp): Delete unused variable.
3031 * c-lang.c (classify_type): Delete unused variable.
3032 * f-lang.c (f_printstr): Delete unused variable.
3033 * objc-lang.c (objc_printstr): Delete unused variable.
3034 * ada-tasks.c (get_known_tasks_addr): Delete unused variable.
3035 * jv-lang.c (type_from_class): ifdef unused variable.
3036 (java_class_name_from_physname): Delete unused variable.
3037 * m2-lang.c (m2_printstr): Delete unused variable.
3039 * objfiles.c (objfile_relocate): Delete unused variable.
3040 * maint.c (_initialize_maint_cmds): Delete unused variable.
3041 * demangle.c (_initialize_demangler): Delete unused variable.
3042 * corefile.c (reopen_exec_file): Delete unused variable.
3043 * dwarf2expr.c (dwarf2_read_address): Delete unused variable.
3044 * dwarf2-frame.c (decode_frame_entry): Delete unused variable.
3046 * osabi.c (_initialize_gdb_osabi): Delete unused variable.
3047 * memattr.c (mem_delete): Delete unused variable.
3048 (invalidate_target_mem_regions): Delete unused variable.
3049 * mem-break.c (default_memory_insert_breakpoint):
3050 Delete unused variable.
3051 * target.c (target_get_osdata): Delete unused variable.
3052 * parse.c (length_of_subexp): Delete unused variable.
3053 (prefixify_subexp): Delete unused variable.
3054 (exp_iterate): Delete unused variable.
3055 * reverse.c (delete_bookmark_command): Delete unused variable.
3057 * macrocmd.c (_initialize_macrocmd): Delete unused variable.
3058 * macroexp.c (gather_arguments): Delete unused variable.
3059 (substitute_args): Delete unused variable.
3060 * completer.c (gdb_completer_loc_break_characters): Unused, delete.
3061 * gdbarch.sh (gdbarch_printable_names): Delete unused variable.
3062 (_initialize_gdbarch): Delete unused variable.
3063 * gdbarch.c, gdbarch.h: Regenerate.
3064 * arch-utils.c (initialize_current_architecture):
3065 Delete unused variable.
3066 (_initialize_gdbarch_utils): Delete unused variable.
3067 * gdbtypes.c (make_cv_type): Delete unused variable.
3068 (make_type_with_address_space): Delete unused variable.
3070 * linespec.c (decode_compound): Delete unused variable.
3071 * dictionary.c (iterator_next_hashed): Delete unused variable.
3072 * infcall.c (call_function_by_hand): Delete unused variable.
3073 * infcmd.c (step_1): Delete unused variable.
3074 (registers_info): Delete unused variable.
3075 (attach_command): Delete unused variable.
3076 * infrun.c (follow_exec): Delete unused variable.
3077 (handle_step_into_function_backwards): Delete unused variable.
3078 (_initialize_infrun): Delete unused variable.
3079 * stack.c (parse_frame_specification_1): Delete unused variable.
3080 (frame_info): Delete unused variable.
3081 (backtrace_command_1): Delete unused variable.
3082 (catch_info): Delete unused variable.
3084 * eval.c (evaluate_subexp_standard): Delete unused variable.
3085 * valops.c (value_cast_pointers): Delete unused variable.
3086 (value_dynamic_cast): Delete unused variable.
3087 (value_array): Delete unused variable.
3088 (find_overload_match): Delete unused variable.
3089 * valarith.c (value_subscript): Delete unused variable.
3090 (value_binop): Delete unused variable.
3091 * valprint.c (_initialize_valprint): Delete unused variable.
3092 * printcmd.c (print_command_1): Delete unused variable.
3093 (address_info): Delete unused variable.
3094 (printf_command): Delete unused variable.
3096 * auxv.c (target_auxv_search): Delete unused variable.
3097 * blockframe.c (get_frame_block): Delete unused variable.
3098 * regcache.c (regcache_cpy): Delete unused variable.
3099 (regcache_cpy_no_passthrough): Delete unused variable.
3100 * charset.c (wchar_iterate): Delete unused variable.
3101 (find_charset_names): Delete unused variable.
3102 (_initialize_charset): Delete unused variable.
3103 * disasm.c (do_mixed_source_and_assembly):
3104 Delete unused variable.
3105 * source.c (set_default_source_symtab_and_line):
3106 Delete unused variable.
3107 (set_substitute_path_command): Delete unused variable.
3108 * value.c (preserve_values): Delete unused variable.
3109 (value_from_double): Delete unused variable.
3111 2010-05-05 Michael Snyder <msnyder@vmware.com>
3113 * psymtab.c (lookup_partial_symbol): Delete unused variable.
3114 (find_last_source_symtab_from_partial): Delete unused variable.
3115 * symfile.c (place_section): Delete unused variable.
3116 (default_symfile_offsets): Delete unused variable.
3117 (get_debug_link_info): Delete unused variable.
3118 (find_separate_debug_file_by_debuglink): Delete unused variable.
3119 (add_symbol_file_command): Delete unused variable.
3120 (symfile_find_segment_sections): Delete unused variable.
3121 * symmisc.c (free_symtab): Delete unused variable.
3122 (dump_symtab_1): Delete unused variable.
3123 * symtab.c (lookup_symbil_aux_quick): Delete unused variable.
3124 (find_pc_sect_symtab): Delete unused variable.
3125 (skip_prologue_using_lineinfo): Delete unused variable.
3126 (sources_info): Delete unused variable.
3127 (completion_list_add_name): Delete unused variable.
3128 (expand_line_sal): Delete unused variable.
3130 * breakpoint.c (validate_commands_for_breakpoint):
3131 Delete unused variables.
3132 (insert_catchpoint): Delete unused variable.
3133 (update_watchpoint): Delete unused variable.
3134 (insert_bp_location): Delete unused variable.
3135 (insert_breakpoint_locations): Delete unused variable.
3136 (remove_breakpoint_1): Delete unused variable.
3137 (software_breakpoint_inserted_here_p): Delete unused variable.
3138 (watchpoints_triggered): Delete unused variable.
3139 (bpstat_check_watchpoint): Delete unused variable.
3140 (bpstat_stop_status): Delete unused variable.
3141 (print_one_breakpoint_location): Delete unused variable.
3142 (allocate_bp_location): Delete unused variable.
3143 (create_breakpoint): Delete unused variable.
3144 (watch_command_1): Delete unused variable.
3145 (catch_exception_command_1): Delete unused variable.
3146 (catch_ada_exception_command): Delete unused variable.
3147 (delete_breakpoint): Delete unused variable.
3148 (breakpoint_re_set_one): Delete unused variable.
3149 (do_enable_breakpoint): Delete unused variable.
3151 2010-05-06 Pedro Alves <pedro@codesourcery.com>
3153 * amd64-tdep.c: Include disasm.h.
3154 (amd64_insn_length_fprintf, amd64_insn_length_init_dis)
3155 (amd64_insn_length): Moved to disasm.c and renamed.
3156 (fixup_riprel): Adjust.
3157 * disasm.c (do_ui_file_delete): New.
3158 (gdb_insn_length): New.
3159 (gdb_buffered_insn_length_fprintf)
3160 (gdb_buffered_insn_length_init_dis)
3161 (gdb_buffered_insn_length): New, moved from amd64-tdep.c, and
3163 * disasm.h (gdb_insn_length): Declare.
3164 (gdb_buffered_insn_length): Declare.
3166 2010-05-06 Pedro Alves <pedro@codesourcery.com>
3168 * remote.c (clear_threads_parsing_context): New.
3169 (remote_threads_info): Delete unused null_cleanup. Install a
3170 cleanup to clear the threads_parsing_context in case parsing
3173 2010-05-05 Michael Snyder <msnyder@vmware.com>
3175 * c-exp.y (parse_string_or_char): Delete unused variable.
3176 (c_lex): Delete unused variable.
3177 * cp-name-parser.y (cpname_lex): Delete unused variable.
3178 * ada-exp.y (find_primitive_type): Delete unused variable.
3179 (write_var_or_type): Delete unused variable.
3180 * jv-exp.y (java_parse): Delete unused variable.
3181 (push_expression_name): Delete unused variable.
3182 * p-exp.y (pascal_lex): Delete unused variable.
3184 2010-05-05 Pedro Alves <pedro@codesourcery.com>
3186 * remote.c (remote_threads_info): Really revert previous previous
3189 2010-05-05 Michael Snyder <msnyder@vmware.com>
3191 * elfread.c (elf_symtab_read): Delete unused variable.
3192 (find_separate_debug_file_by_buildid): Delete unused variables.
3193 (elf_symfile_read): Delete unused variable.
3195 * coffread.c (coff_symfile_read): Delete unused variables.
3197 * coff-pe-read.c (add_pe_exported_sym): Delete unused variable.
3198 (read_pe_exported_syms): Delete unused variable.
3200 * stabsread.c (define_symbol): Delete unused variable.
3202 * dwarf2read.c (read_type_comp_unit_head): Delete unused variable.
3203 (process_psymtab_comp_unit): Delete unused variable.
3204 (dwarf2_build_psymtabs_hard): Delete unused variable.
3205 (load_partial_comp_unit): Delete unused variable.
3206 (create_all_comp_units): Delete unused variable.
3207 (scan_partial_symbols): Delete unused variable.
3208 (add_partial_symbol): Delete unused variable.
3209 (add_partial_namespace): Delete unused variable.
3210 (add_partial_enumeration): Delete unused variable.
3211 (load_full_comp_unit): Delete unused variable.
3212 (process_full_comp_unit): Delete unused variable.
3213 (read_file_scope): Delete unused variable.
3214 (read_type_unit_scope): Delete unused variable.
3215 (process_structure_scope): Delete unused variable.
3216 (process_enumeration_scope): Delete unused variable.
3217 (read_tag_ptr_to_member_type): Delete unused variable.
3218 (read_typedef): Delete unused variable.
3219 (read_partial_die): Delete unused variable.
3220 (decode_locdesc): Delete unused variable.
3221 (zeroed_partial_die): Delete unused global variable.
3223 * tui/tui-interp.c (_initialize_tui_interp):
3224 Delete unused variable.
3225 * tui/tui-regs.c tui_display_registers_from):
3226 Delete unused variable.
3227 (tui_check_register_values): Delete unused variable.
3228 (tui_register_format): Delete unused variable.
3229 * tui/tui-win.c (_initialize_tui_win): Delete unused variable.
3230 * tui/tui-windata.c (tui_display_data_from_line):
3231 Delete unused variables.
3232 (tui_vertical_data_scroll): Delete unused variables.
3234 2010-05-05 Michael Snyder <msnyder@vmware.com>
3236 * remote.c (remote_threads_info): Revert questionable part of
3237 the previous change.
3239 2010-05-05 Michael Snyder <msnyder@vmware.com>
3241 * mi/mi-out.c (mi_table_begin): Delete unused variable.
3242 * mi/mi-cmd-var.c (print_varobj): Delete unused variable.
3243 (mi_cmd_var_list_children): Delete unused variable.
3244 (varobj_update_one): Delete unused variable.
3245 * mi/mi-cmd-break.c (mi_cmd_break_insert): Delete unused variables.
3246 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals):
3247 Delete unused variable.
3248 (mi_cmd_stack_list_variables): Delete unused variable.
3249 (list_args_or_locals): Delete unused variable.
3250 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file):
3251 Delete unused variables.
3252 (mi_cmd_file_list_exec_source_files): Delete unused variable.
3253 * mi/mi-cmd-target.c (mi_cmd_target_file_delete):
3254 Delete unused variable.
3255 * mi/mi-interp.c (mi_interpreter_exec): Delete unused variable.
3256 (mi_cmd_interpreter_exec): Delete unused variable.
3257 (mi_on_normal_stop): Delete unused variable.
3258 * mi/mi-main.c (run_one_inferior): Delete unused variable.
3259 (print_one_inferior): Delete unused variables.
3260 (mi_execute_command): Delete unused variable.
3261 (mi_cmd_execute): Delete unused variable.
3262 (timestamp): Delete unused variable.
3264 * cli/cli-dump.c (dump_memory_to_file): Delete unused variable.
3265 (restore_binary_file): Delete unused variable.
3266 * cli/cli-decode.c (deprecated_cmd_warning): Delete unused variables.
3267 * cli/cli-script.c (define_command): Delete unused variables.
3268 (recurse_read_control_structure): Delete unused variable.
3269 (script_from_file): Delete unused variable.
3270 * cli/cli-cmds.c (complete_command): Delete unused variable.
3271 (disassemble_command): Delete unused variable.
3273 * ax-gdb.c (gen_struct_elt_for_reference): Delete unused variables.
3274 * tracepoint.c (delete_trace_variable_command):
3275 Delete unused variables.
3276 (encode_actions_1): Delete unused variables.
3277 (start_tracing): Delete unused variable.
3278 (trace_status_mi): Delete unused variable.
3279 (tfind_1): Delete unused variable.
3280 (trace_find_pc_command): Delete unused variable.
3281 (trace_find_line_command): Delete unused variables.
3282 (trace_find_range_command): Delete unused variables.
3283 (trace_find_outside_command): Delete unused variables.
3284 (parse_tracepoint_definition): Delete unused variables.
3285 (tfile_fetch_registers): Delete unused variable.
3287 * dcache.c (dcache_init): Delete unused variable.
3288 (dcache_info): Delete unused variable.
3290 * remote.c (remote_threads_info): Delete unused variable.
3291 (process_stop_reply) :Delete unused variable.
3292 (remote_get_trace_status): Delete unused variables.
3294 * linux-thread-db.c (add_thread_db_info): Delete unused variable.
3295 (thread_from_lwp): Delete unused variable.
3296 (enable_thread_event_reporting): Delete unused variable.
3297 (check_for_thread_db): Delete unused variables.
3298 (thread_db_find_new_threads_2): Delete unused variable.
3300 * linux-fork.c (info_checkpoints_command): Delete unused variables.
3301 (checkpoint_command): Delete unused variable.
3302 (linux_fork_context): Delete unused variables.
3304 * linux-nat.c (linux_parent_pid): Delete unused global variable.
3305 (linux_tracefork_child): Delete unused variable.
3306 (linux_child_follow_fork): Delete unused variable.
3307 (linux_nat_detach): Delete unused variable.
3308 (linux_handle_extended_wait): Delete unused variable.
3309 (linux_nat_has_pending_sigint): Delete unused variable.
3310 (linux_nat_find_memory_regions): Delete unused variable.
3311 (linux_nat_make_corefile_notes): Delete unused variables.
3312 (linux_nat_info_proc_cmd): Delete unused variable.
3313 (linux_proc_pending_signals): Delete unused variable.
3314 (linux_nat_stop_lwp): Delete unused variables.
3315 (_initialize_linux_nat): Delete unused variable.
3317 * ser-pipe.c (pipe_ops): Delete unused global variable.
3319 * linux-record.c (record_linux_system_call):
3320 Delete unused variables.
3322 * corelow.c (core_xfer_partial): Delete unused variables.
3324 * solib-svr4.c (find_program_interpreter): Delete unused variable.
3325 (svr4_solib_create_inferior_hook): Add ifdef around
3326 conditionally-used variable declarations.
3328 * solib.c (solib_find): Delete unused variable.
3329 (free_so_symbols): Delete unused variable.
3330 (info_sharedlibrary_command): Delete unused variable.
3331 (reload_shared_libraries_1): Delete unused variable.
3332 (_initialize_solib): Delete unused variable.
3334 * i386-tdep.c (i386_supply_xstateregset) Delete unused variable.
3335 (i386_collect_xstateregset): Delete unused variable.
3336 * i387-tdep.c (i387_print_float_info): Delete unused variable.
3338 * features/i386/i386-mmx.c (initialize_tdesc_i386_mmx):
3339 Delete unused variable 'type'.
3341 2010-05-05 Joel Brobecker <brobecker@adacore.com>
3343 * gdbtypes.h (MAX_OF_TYPE, MIN_OF_TYPE): Delete macros. *
3344 ada-lang.c: Remove comment mentioning these macros.
3345 * m2-exp.y: Delete commented out code.
3347 2010-05-05 Joel Brobecker <brobecker@adacore.com>
3349 * sparc-tdep.c (sparc_structure_or_union_p): Return non-zero
3351 * sparc64-tdep.c (sparc64_structure_or_union_p): Likewise.
3353 2010-05-04 Pierre Muller <muller@ics.u-strasbg.fr>
3355 ARI fix: Remove ATTRIBUTE_UNUSED throughout.
3356 * arm-linux-tdep.c (arm_linux_cleanup_svc): Remove
3358 (cleanup_kernel_helper_return): Likewise.
3359 * arm-tdep.c (copy_unmodified): Likewise.
3360 (copy_preload): Likewise.
3361 (copy_copro_load_store): Likewise.
3362 (cleanup_branch): Likewise.
3363 (copy_b_bl_blx): Likewise.
3364 (copy_bx_blx_reg): Likewise.
3365 (copy_alu_imm): Likewise.
3366 (copy_alu_reg): Likewise.
3367 (copy_alu_shifted_reg): Likewise.
3368 (cleanup_load): Likewise.
3369 (cleanup_store): Likewise.
3370 (cleanup_block_load_pc): Likewise.
3371 (cleanup_svc): Likewise.
3372 (copy_undef): Likewise.
3373 (copy_unpred): Likewise.
3374 * remote.c (register_remote_support_xml): Likewise.
3376 2010-05-05 Hui Zhu <teawater@gmail.com>
3378 * gdbarch.h (gdbarch_has_dos_based_file_system): Update comment.
3380 2010-05-04 Mark Kettenis <kettenis@gnu.org>
3382 * remote.c (register_remote_support_xml)
3383 (remote_query_supported_append, remote_query_supported): Add cast
3384 to NULL used as sentinel.
3385 * tracepoint.c (tvariables_info_1): Likewise.
3386 * utils.c (add_internal_problem_command): Likewise.
3388 2010-05-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3390 * dwarf2loc.c (read_pieced_value, write_pieced_value,
3391 dwarf2_evaluate_loc_desc): Handle not being able to access DWARF
3392 registers gracefully.
3394 2010-05-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3396 * exec.c (print_section_info): Display entry point without arch
3399 2010-05-04 Pierre Muller <muller@ics.u-strasbg.fr>
3402 * printcmd.c (x_command): Only dereference once implicitly for
3405 2010-05-03 Doug Evans <dje@google.com>
3407 * event-loop.c (gdb_timer): Delete unused global.
3408 (create_timer): Update.
3410 2010-05-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3412 * cp-namespace.c (cp_lookup_symbol_imports): Support ALIAS for the
3413 CURRENT->DECLARATION case.
3414 * cp-support.h (struct using_direct): Provide extended comment.
3416 2010-05-03 Mark Kettenis <kettenis@gnu.org>
3418 * hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Renamed from
3419 HPPABSD_SIZEOF_GREGS.
3420 (HPPAOBSD_SIZEOF_FPREGS): New define.
3421 (hppaobsd_supply_gregset): Renamed from hppabsd_supply_gregset.
3422 (hppaobsd_supply_fpregset): New function.
3423 (hppaobsd_gregset): Renamed from hppabsd_gregset.
3424 (hppaobsd_fpregset): New variable.
3425 (hppaobsd_regset_from_core_section): Handle floating-point registers.
3426 (_initialize_hppabsd_tdep): Remove spurious blank line.
3428 2010-05-03 Pierre Muller <muller@ics.u-strasbg.fr>
3431 * p-valprint.c (pascal_value_print): Always dereference a value with
3432 type code TYPE_CODE_REF.
3434 2010-05-03 Pedro Alves <pedro@codesourcery.com>
3436 * remote.c (remote_notice_signals): New.
3437 (remote_start_remote): In non-stop mode, update the remote end on
3438 which signals it can silently pass.
3439 (init_remote_ops): Install remote_notice_signals.
3441 2010-05-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3443 * cli/cli-cmds.h (error_no_arg): Remove. Move the comment ...
3444 * command.h (error_no_arg): ... here. Remove NORETURN, change
3445 ATTR_NORETURN to ATTRIBUTE_NORETURN.
3446 * defs.h (NORETURN, ATTR_NORETURN): Remove.
3447 (perror_with_name, verror, error, error_stream, vfatal, fatal)
3448 (internal_verror, internal_error, nomem): Remove NORETURN, change
3449 ATTR_NORETURN to ATTRIBUTE_NORETURN.
3450 * exceptions.c (throw_exception, deprecated_throw_reason, throw_verror)
3451 (throw_vfatal, throw_error): Remove NORETURN.
3452 (throw_it): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN.
3453 * exceptions.h (throw_exception, throw_verror, throw_vfatal)
3454 (throw_error, deprecated_throw_reason): Remove NORETURN, change
3455 ATTR_NORETURN to ATTRIBUTE_NORETURN.
3456 * linespec.c (cplusplus_error): Remove NORETURN, change ATTR_NORETURN
3457 to ATTRIBUTE_NORETURN for prototype, for the definition only remove
3459 * remote-mips.c (mips_error): Change NORETURN to ATTRIBUTE_NORETURN.
3460 * remote-sim.c (gdb_os_error): Change ATTR_NORETURN to
3462 * target.c (tcomplain): Likewise.
3463 * target.h (noprocess): Remove NORETURN, change ATTR_NORETURN to
3465 * utils.c (verror, error, vfatal, fatal, error_stream, internal_verror)
3466 (internal_error, perror_with_name, nomem): Remove NORETURN.
3467 * xml-support.h (gdb_xml_error): Change ATTR_NORETURN to
3470 2010-05-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3472 * ada-lang.c (lim_warning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3473 * amd64-tdep.c (amd64_insn_length_fprintf): Likewise.
3474 * cli-out.c (cli_field_fmt): New ATTRIBUTE_PRINTF.
3475 (cli_message, out_field_fmt): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3476 * complaints.c (find_complaint): New ATTRIBUTE_PRINTF.
3477 (vcomplaint): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3478 * complaints.h (complaint, internal_complaint): Likewise.
3479 * defs.h: Change ATTR_FORMAT to ATTRIBUTE_PRINTF in the top comment.
3480 (ATTR_FORMAT): Remove.
3481 (query, nquery, yquery, vprintf_filtered, vfprintf_filtered)
3482 (fprintf_filtered, fprintfi_filtered, printf_filtered, printfi_filtered)
3483 (vprintf_unfiltered, vfprintf_unfiltered, fprintf_unfiltered)
3484 (printf_unfiltered, xasprintf, xvasprintf, xstrprintf, xstrvprintf)
3485 (xsnprintf, verror, error, vfatal, fatal, internal_verror)
3486 (internal_error, internal_vwarning, internal_warning, warning)
3487 (vwarning): Change ATTR_FORMAT to ATTRIBUTE_PRINTF.
3488 * disasm.c (fprintf_disasm): Likewise.
3489 * exceptions.c (throw_it): Likewise.
3490 * exceptions.h (exception_fprintf, throw_verror, throw_vfatal)
3491 (throw_error): Likewise.
3492 * language.h (type_error, range_error): Likewise.
3493 * linespec.c (cplusplus_error): Likewise.
3494 * mi/mi-interp.c (mi_interp_query_hook): Likewise.
3495 * mi/mi-out.c (mi_field_fmt, mi_message): Likewise.
3496 * monitor.c (monitor_debug): Likewise.
3497 * parser-defs.h (parser_fprintf): Likewise.
3498 * serial.h (serial_printf): Likewise.
3499 * tui/tui-hooks.c (tui_query_hook): Likewise.
3500 * ui-out.c (default_field_fmt, default_message, uo_field_fmt)
3501 (uo_message): Likewise.
3502 * ui-out.h (ui_out_field_fmt, ui_out_message): Likewise.
3503 * utils.c (vfprintf_maybe_filtered, internal_vproblem, defaulted_query):
3505 * xml-support.h (gdb_xml_debug, gdb_xml_error): Likewise.
3507 2010-05-02 Pedro Alves <pedro@codesourcery.com>
3509 * cli-out.c (cli_table_begin, cli_table_body, cli_table_end)
3510 (cli_table_header, cli_begin, cli_end, cli_field_int)
3511 (cli_field_skip, cli_field_string, cli_field_fmt, cli_spaces)
3512 (cli_text, cli_message, cli_wrap_hint, cli_flush, cli_redirect):
3513 Delete forward declarations.
3514 (cli_ui_out_impl): Move below the callbacks.
3515 (_initialize_cli_out): Delete.
3517 2010-05-02 Pedro Alves <pedro@codesourcery.com>
3519 * README: Use consistent `GDB' and `GDBserver' spellings.
3521 2010-05-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3523 * cli/cli-dump.h (parse_and_eval_with_error): Remove the declaration.
3525 2010-05-01 Pedro Alves <pedro@codesourcery.com>
3527 * infrun.c (prepare_for_detach): In non-stop, context switch to
3528 the thread that got the event before handling the event.
3530 2010-04-30 Tom Tromey <tromey@redhat.com>
3532 * symtab.c (symbol_set_names): Fix typo.
3534 2010-04-30 Pierre Muller <muller@ics.u-strasbg.fr>
3536 * python/py-param.c (parm_constants): Avoid ARI warning
3537 by adding ARI comment.
3538 (parmpy_init): Likewise.
3540 2010-04-30 Pierre Muller <muller@ics.u-strasbg.fr>
3542 * windows-tdep.c (windows_get_tlb_type): Remember last GDBARCH
3543 and created type for re-use.
3545 2010-04-30 Pierre Muller <muller@ics.u-strasbg.fr>
3547 * NEWS: Mention gdbserver support for x86_64 Windows 64-bit.
3549 2010-04-29 Doug Evans <dje@google.com>
3551 * ser-base.h (reschedule): Delete prototype.
3552 * ser-base.c (reschedule): Make static.
3554 2010-04-29 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3556 * arm-linux-tdep.c (ARM_LINUX_JB_PC): Remove.
3557 (ARM_LINUX_JB_PC_FPA): Add, offset of PC in longjmp buffer for FPA.
3558 (ARM_LINUX_JB_PC_EABI): Add, offset of PC in longjmp buffer for
3560 (arm_linux_init_abi): Set up JB_PC field dependent on FP model in
3563 2010-04-29 Pedro Alves <pedro@codesourcery.com>
3567 * regcache.c (registers_changed): Rename to ...
3568 (registers_changed_ptid): ... this, and only delete register cache
3569 entries matching the ptid filter argument.
3570 (registers_changed): Reimplement on top of registers_changed_ptid.
3571 * regcache.h (registers_changed_ptid): Declare.
3572 * target.c (target_resume): Flush register caches.
3574 2010-04-29 Phil Muldoon <pmuldoon@redhat.com>
3575 Tom Tromey <tromey@redhat.com>
3576 Thiago Jung Bauermann <bauerman@br.ibm.com>
3578 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-parameter.
3579 (SUBDIR_PYTHON_SRCS): Likewise.
3580 (py-parameter.o): New rule.
3581 * python/py-parameter.c: New file.
3582 * python/python-internal.h (gdbpy_initialize_parameter)
3583 (gdbpy_parameter, gdbpy_parameter_value)
3584 (gdbpy_parse_command_name): Declare.
3585 * python/py-cmd.c (parse_command_name): Rename to
3586 gdbpy_parse_command_name.
3587 (gdbpy_parse_command_name): Accept a starting list parameter and
3589 (cmdpy_init): Use gdbpy_parse_command_name.
3590 * python/python.c (parameter_to_python): Rename to
3591 gdbpy_parameter_to_python. Accept enum var_types and value.
3592 (gdbpy_parameter): Use gdbpy_parameter_value.
3593 (_initialize_python): Call gdbpy_initialize_parameters.
3595 2010-04-29 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3597 * MAINTAINERS: Add myself for write after approval privileges.
3599 2010-04-29 Mihail Zenkov <mihail.zenkov@gmail.com>
3602 * Makefile.in (SFILES): Add d-lang.c d-valprint.c.
3603 (COMMON_OBS): Add d-lang.o d-valprint.o.
3604 (HFILES_NO_SRCDIR): Add d-lang.h.
3605 * NEWS: Mention D language support.
3606 * c-lang.c (c_emit_char, exp_descriptor_c): Make public.
3607 * c-lang.h (c_emit_char, exp_descriptor_c): Add declaration.
3608 * d-lang.c: New file.
3609 * d-lang.h: New file.
3610 * d-valprint.c: New file.
3611 * defs.h (enum language): Add language_d.
3612 * dwarf2read.c (set_cu_language): Add DW_LANG_D.
3613 * language.c (binop_result_type, integral_type, character_type)
3614 (string_type, boolean_type, structured_type): Add language_d.
3615 * symfile.c (init_filename_language_table): Add language_d.
3616 * symtab.c: Include d-lang.h.
3617 (symbol_init_language_specific, symbol_find_demangled_name)
3618 (symbol_natural_name, lookup_symbol_in_language)
3619 (symbol_demangled_name, symbol_matches_domain): Add language_d.
3621 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3623 * solib-svr4.c (solib_svr4_r_map): Expand function description.
3625 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3627 * symfile.c (init_filename_language_table): Register .dg files
3630 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3632 * gdbtypes.h (struct main_type): Expand comment about target_type
3635 2010-04-27 Pedro Alves <pedro@codesourcery.com>
3636 Tristan Gingold <gingold@adacore.com>
3638 * symfile.c (reread_symbols): Also search for file in libraries.
3641 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3643 * configure.tgt: Treat x86-lynxos targets as x86 bareboard targets
3644 in terms of configuration.
3646 2010-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
3648 * objfiles.c: Include solist.h.
3649 (free_all_objfiles): New variable so. Check stale solist objfiles.
3650 * symfile.c (symbol_file_clear): Swap the order of free_all_objfiles
3651 and no_shared_libraries.
3653 2010-04-27 Joel Brobecker <brobecker@adacore.com>
3656 * python/py-auto-load.c (source_section_scripts): Remove trailing
3657 new-line in i18n string.
3659 2010-04-26 Doug Evans <dje@google.com>
3661 * serial.c (serial_write): Handle serial_debug_p akin to serial_read.
3663 2010-04-26 Tom Tromey <tromey@redhat.com>
3665 * cli/cli-decode.c (complete_on_cmdlist): Make two passes over the
3668 2010-04-26 Pierre Muller <muller@ics.u-strasbg.fr>
3670 Removal of config/i386/nm-i386sol2.h native configuration file.
3671 * config/i386/nm-i386sol2.h: Remove file.
3672 * config/i386/i386sol2.mh: Remove NAT_FILE definition.
3673 * config/i386/sol2-64.mh: Idem.
3674 * config/djgpp/fnchange.lst: Remove reference to that file.
3675 * Makefile.in (HFILES_NO_SRCDIR): Idem.
3677 2010-04-26 Pierre Muller <muller@ics.u-strasbg.fr>
3679 PR breakpoints/11531.
3680 * config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove
3681 macro definition and related comment.
3682 * infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro.
3683 (resume): Remove code and comment related to this macro.
3685 2010-04-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3687 * cp-namespace.c (cp_lookup_symbol_in_namespace): Fix alloca size.
3690 2010-04-24 Pedro Alves <pedro@codesourcery.com>
3692 * defs.h: Adjust comment.
3693 * filesystem.h, filesystem.c: New files.
3694 * Makefile.in (SFILES): Add filesystem.c.
3695 (COMMON_OBS): Add filesystem.o.
3696 * solib.c (solib_find): Handle DOS-based filesystems. Handle
3697 different target and host path flavours.
3698 * arm-symbian-tdep.c (arm_symbian_init_abi): Set
3699 has_dos_based_file_system on the gdbarch.
3700 * arm-wince-tdep.c (arm_wince_init_abi): Ditto.
3701 * i386-cygwin-tdep.c (i386_cygwin_init_abi): Ditto.
3702 * i386-tdep.c (i386_go32_init_abi): Ditto.
3703 * gdbarch.sh (has_dos_based_file_system): New.
3704 * gdbarch.h, gdbarch.c: Regenerate.
3705 * NEWS: Mention improved support for remote targets with DOS-based
3706 filesystems. Mention new `set/show target-file-system-kind'
3709 2010-04-23 Stan Shebs <stan@codesourcery.com>
3711 * ax.h (struct agent_expr): Merge in agent_reqs fields, add some
3713 (struct agent_reqs): Remove.
3714 (ax_reg_mask): Declare.
3715 * ax-general.c (new_agent_expr): Add gdbarch argument, set new fields.
3716 (free_agent_expr): Free reg_mask.
3717 (ax_print): Add scope and register mask info.
3718 (ax_reqs): Remove agent_reqs argument, use agent expression
3719 fields, and move part of register mask computation to...
3720 (ax_reg_mask): New function.
3721 * ax-gdb.c (gen_trace_static_fields): Call it.
3722 (gen_traced_pop): Ditto.
3723 (is_nontrivial_conversion): Add dummy gdbarch to new_agent_expr.
3724 (gen_trace_for_var): Pass gdbarch to new_agent_expr.
3725 (gen_trace_for_expr): Ditto, and clear optimized_out flag.
3726 (gen_eval_for_expr): Ditto, and require an rvalue.
3727 (agent_command): Call ax_reqs.
3728 (agent_eval_command): Ditto.
3729 * tracepoint.c (report_agent_reqs_errors): Use agent expression fields.
3730 (validate_action_line): Ditto.
3731 (collect_symbol): Ditto.
3732 (encode_actions_1): Ditto.
3734 2010-04-23 Daniel Jacobowitz <dan@codesourcery.com>
3735 Paul Pluzhnikov <ppluzhnikov@google.com>
3736 Jan Kratochvil <jan.kratochvil@redhat.com>
3738 Fix deadlock on looped list of loaded shared objects.
3739 * solib-svr4.c (LM_PREV): New function.
3740 (IGNORE_FIRST_LINK_MAP_ENTRY): Use it.
3741 (svr4_current_sos): Check for correct l_prev. New variables prev_lm
3742 and next_lm. Clear prev_lm for solib_svr4_r_ldsomap.
3743 * config/djgpp/fnchange.lst: Add translation for solib-corrupted.exp.
3745 2010-04-23 Doug Evans <dje@google.com>
3747 * configure.ac (CONFIG_SRCS): Add py-auto-load.o even if not using
3749 * configure: Regenerate.
3750 * main.c: #include "python/python.h".
3751 (captured_main): Defer loading auto-loaded scripts until after
3752 local_gdbinit has been sourced.
3753 * python/py-auto-load.c (gdbpy_global_auto_load): New global.
3754 (load_auto_scripts_for_objfile): New function.
3755 (auto_load_new_objfile): Call it.
3756 * python/python.h (gdbpy_global_auto_load): Declare.
3757 (load_auto_scripts_for_objfile): Declare.
3759 Add support for auto-loading scripts from .debug_gdb_scripts section.
3760 * NEWS: Add entry for .debug_gdb_scripts.
3761 * Makefile.in SUBDIR_PYTHON_OBS): Add py-auto-load.o.
3762 (SUBDIR_PYTHON_SRCS): Add py-auto-load.c.
3763 (py-auto-load.o): New rule.
3764 * cli/cli-cmds.c (find_and_open_script): Make externally visible.
3765 * cli/cli-cmds.h (find_and_open_script): Update prototype.
3766 * python/py-auto-load.c: New file.
3767 * python/python-internal.h: #include <stdio.h>.
3768 (set_python_list, show_python_list): Declare.
3769 (gdbpy_initialize_auto_load): Declare.
3770 (source_python_script_for_objfile): Declare.
3771 * python/python.c: Remove #include of observer.h.
3772 (gdbpy_auto_load): Moved to py-auto-load.c.
3773 (GDBPY_AUTO_FILENAME): Ditto.
3774 (gdbpy_new_objfile): Delete.
3775 (source_python_script_for_objfile): New function.
3776 (set_python_list, show_python_list): Make externally visible.
3777 (_initialize_python): Move "auto-load" command to py-auto-load.c
3778 and observer_attach_new_objfile to py-auto-load.c.
3780 2010-04-23 Jerome Guitton <guitton@adacore.com>
3782 * alpha-tdep.c (INSN_OPCODE, MEM_RA, MEM_RB, MEM_DISP, BR_RA)
3783 (OPR_FUNCTION, OPR_HAS_IMMEDIATE, OPR_RA, OPR_RC, OPR_LIT): New macros.
3784 (lda_opcode, stq_opcode, bne_opcode, subq_opcode, subq_function):
3786 (alpha_heuristic_analyze_probing_loop): New function.
3787 (alpha_heuristic_frame_unwind_cache): In the prologue analysis, detect
3788 and handle cases when a stack probe loop is generated.
3789 * alpha-mdebug-tdep.c (alpha_mdebug_frameless): New function.
3790 (alpha_mdebug_max_frame_size_exceeded): New function.
3791 (alpha_mdebug_after_prologue): Use alpha_mdebug_frameless.
3792 (alpha_mdebug_frame_sniffer, alpha_mdebug_frame_base_sniffer):
3793 Return 0 when the maximum debuggable frame size has been exceeded.
3795 2010-04-23 Joel Brobecker <brobecker@adacore.com>
3798 * ppc-linux-nat.c (booke_cmp_hw_point): Do not mark inline.
3800 2010-04-20 Chris Moller <cmoller@redhat.com>
3804 * symtab.c (rbreak_command): Added code to include a filename
3805 specification in the rbreak argument.
3806 * NEWS: Added a brief description of filename-qualified rbreak.
3808 2010-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
3810 Fix crashes on dangling display expressions.
3811 * ada-lang.c (ada_operator_check): New function.
3812 (ada_exp_descriptor): Fill-in the field operator_check.
3813 * c-lang.c (exp_descriptor_c): Fill-in the field operator_check.
3814 * jv-lang.c (exp_descriptor_java): Likewise.
3815 * m2-lang.c (exp_descriptor_modula2): Likewise.
3816 * scm-lang.c (exp_descriptor_scm): Likewise.
3817 * parse.c (exp_descriptor_standard): Likewise.
3818 (operator_check_standard): New function.
3819 (exp_iterate, exp_uses_objfile_iter, exp_uses_objfile): New functions.
3820 * parser-defs.h (struct exp_descriptor): New field operator_check.
3821 (operator_check_standard, exp_uses_objfile): New declarations.
3822 * printcmd.c: Remove the inclusion of solib.h.
3823 (display_uses_solib_p): Remove the function.
3824 (clear_dangling_display_expressions): Call lookup_objfile_from_block
3825 and exp_uses_objfile instead of display_uses_solib_p.
3826 * solist.h (struct so_list) <objfile>: New comment.
3827 * symtab.c (lookup_objfile_from_block): Remove the static qualifier.
3828 * symtab.h (lookup_objfile_from_block): New declaration.
3829 (struct general_symbol_info) <obj_section>: Extend the comment.
3831 2010-04-22 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
3832 Thiago Jung Bauermann <bauerman@br.ibm.com>
3834 * ppc-linux-nat.c (PTRACE_GET_DEBUGREG): Update comment.
3835 (PPC_PTRACE_GETWDBGINFO, PPC_PTRACE_SETHWDEBUG, PPC_PTRACE_DELHWDEBUG,
3836 ppc_debug_info, PPC_DEBUG_FEATURE_INSN_BP_RANGE,
3837 PPC_DEBUG_FEATURE_INSN_BP_MASK, PPC_DEBUG_FEATURE_DATA_BP_RANGE,
3838 PPC_DEBUG_FEATURE_DATA_BP_MASK, ppc_hw_breakpoint,
3839 PPC_BREAKPOINT_TRIGGER_EXECUTE, PPC_BREAKPOINT_TRIGGER READ,
3840 PPC_BREAKPOINT_TRIGGER_WRITE, PPC_BREAKPOINT_TRIGGER_RW,
3841 PPC_BREAKPOINT_MODE_EXACT PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE,
3842 PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE, PPC_BREAKPOINT_MODE_MASK,
3843 PPC_BREAKPOINT_CONDITION_NONE, PPC_BREAKPOINT_CONDITION_AND,
3844 PPC_BREAKPOINT_CONDITION_EXACT, PPC_BREAKPOINT_CONDITION_OR,
3845 PPC_BREAKPOINT_CONDITION_AND_OR, PPC_BREAKPOINT_CONDITION_BE_ALL,
3846 PPC_BREAKPOINT_CONDITION_BE_SHIFT, PPC_BREAKPOINT_CONDITION_BE):
3847 Define, in case <ptrace.h> doesn't provide it.
3848 (booke_debug_info): New variable.
3849 (max_slots_number): Ditto.
3850 (hw_break_tuple): New struct.
3851 (thread_points): Ditto.
3852 (ppc_threads): New variable.
3853 (PPC_DEBUG_CURRENT_VERSION): New define.
3854 (have_ptrace_new_debug_booke): New function.
3855 (ppc_linux_check_watch_resources): Renamed to ...
3856 (ppc_linux_can_use_hw_breakpoint): ... this. Handle BookE processors.
3857 (ppc_linux_region_ok_for_hw_watchpoint): Handle BookE processors.
3858 (booke_cmp_hw_point): New function.
3859 (booke_find_thread_points_by_tid): Ditto.
3860 (booke_insert_point): Ditto.
3861 (booke_remove_point): Ditto.
3862 (ppc_linux_insert_hw_breakpoint): Ditto.
3863 (ppc_linux_remove_hw_breakpoint): Ditto.
3864 (get_trigger_type): Ditto.
3865 (ppc_linux_insert_watchpoint): Handle BookE processors.
3866 (ppc_linux_remove_watchpoint): Ditto.
3867 (ppc_linux_new_thread): Ditto.
3868 (ppc_linux_thread_exit): New function..
3869 (ppc_linux_stopped_data_address): Handle BookE processors.
3870 (ppc_linux_watchpoint_addr_within_range): Ditto.
3871 (_initialize_ppc_linux_nat): Initialize to_insert_hw_breakpoint and
3872 to_remove_hw_breakpoint fields of the target operations struct.
3873 Add observe for the thread_exit event.
3875 2010-04-22 H.J. Lu <hongjiu.lu@intel.com>
3877 * i386-linux-nat.c (regmap): Removed.
3878 (fetch_register): Replace regmap with
3879 i386_linux_gregset_reg_offset.
3880 (store_register): Likewise.
3881 (supply_gregset): Likewise.
3882 (fill_gregset): Likewise.
3884 * i386-linux-tdep.c (i386_linux_gregset_reg_offset): Make it
3887 * i386-linux-tdep.h (i386_linux_gregset_reg_offset): New.
3889 2010-04-22 Chris Moller <cmoller@redhat.com>
3891 * cp-valprint.c (cp_print_value_fields): Replaced obstack_base()
3892 method of popping recursion-detection stack with a method based on
3893 obstack_object_size(). (Similar to the PR9167 patch below, but for
3894 the static array obstack rather than the static member obstack.)
3896 2010-04-22 H.J. Lu <hongjiu.lu@intel.com>
3898 * amd64-linux-nat.c (amd64_linux_gregset64_reg_offset): Removed.
3899 (_initialize_amd64_linux_nat): Replace
3900 amd64_linux_gregset64_reg_offset with
3901 amd64_linux_gregset_reg_offset.
3903 * amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Make it
3906 * amd64-tdep.h (amd64_linux_gregset_reg_offset): New.
3908 2010-04-22 Pierre Muller <muller@ics.u-strasbg.fr>
3911 * stabsread.c (set_length_in_type_chain): New function.
3912 (read_struct_type): Call set_length_in_type_chain function.
3913 (read_enum_type): Idem.
3915 2010-04-21 Stan Shebs <stan@codesourcery.com>
3916 Nathan Sidwell <nathan@codesourcery.com>
3918 * tracepoint.c (trace_save): Open in binary mode.
3920 2010-04-22 Pierre Muller <muller@ics.u-strasbg.fr>
3922 * gdbtypes.h (builtin_type): Add builtin_char16 and builtin_char32
3924 * gdbtypes.c (gdbtypes_post_init): Set builtin_char16 and
3925 builtin_char32 fields.
3926 * printcmd.c (decode_format): Set char size to '\0'
3927 for strings unless explicit size is given.
3928 (print_formatted): Correct calculation of NEXT_ADDRESS
3929 for 16 or 32 bit strings.
3930 (do_examine): Do not force byte size for strings.
3931 Use builtin_char16 and builtin_char32 types to display
3932 16 or 32 bit-wide strings.
3933 (x_command): Set LAST_SIZE to 'b' for string type.
3935 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
3938 * amd64-linux-tdep.c (amd64_linux_core_read_description): Check
3941 * i386-linux-tdep.c (i386_linux_core_read_xcr0): Return 0 if
3942 there is no .reg-xstate section.
3943 (i386_linux_core_read_description): Check XCR0 first.
3945 2010-04-21 Mike Frysinger <vapier@gentoo.org>
3947 * gdb/sparc-tdep.c (sparc32_store_return_value): Add gdb_assert ()
3950 2010-04-21 Chris Moller <cmoller@redhat.com>
3953 * cp-valprint.c (cp_print_value_fields): Replaced obstack_base()
3954 method of popping recursion-detection stack with a method based on
3955 obstack_object_size().
3957 2010-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3960 * p-valprint.c (pascal_val_print): Fix default printing of integer
3963 2010-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3965 Fix compilation warning on gcc-4.1.2.
3966 * rs6000-aix-tdep.c (rs6000_convert_from_func_ptr_addr): Initialize
3967 local variable`pc' to zero.
3969 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3971 Implement thread support with core files on alpha-tru64.
3972 * dec-thread.c (dec_thread_find_new_threads): New function,
3973 extracted from resync_thread_list.
3974 (resync_thread_list): Add OPS parameter. Replace extracted-out
3975 code by call to dec_thread_find_new_threads.
3976 (dec_thread_wait): Update call to resync_thread_list.
3977 (init_dec_thread_ops): Set dec_thread_ops.to_find_new_threads.
3979 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3981 * ada-lang.c (value_pointer): New function.
3982 (make_array_descriptor): Call value_pointer to convert addresses to
3985 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3987 * rs6000-aix-tdep.c: #include exceptions.h.
3988 (rs6000_convert_from_func_ptr_addr): If an exception is thrown
3989 while reading the memory at ADDR, then ADDR cannot be a function
3992 2010-04-20 Joel Brobecker <brobecker@adacore.com>
3994 * ada-typeprint.c (ada_print_typedef): New function.
3995 * ada-lang.h (ada_print_typedef): Add declaration.
3996 * ada-lang.c (ada_language_defn): set la_print_typdef field
3997 to ada_print_typedef.
3999 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4001 * procfs.c (procfs_address_to_host_pointer): Only define when used.
4003 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4005 * procfs.c (iterate_over_mappings_cb_ftype): New typedef.
4006 (iterate_over_mappings): Adjust function profile. Add declaration.
4007 (insert_dbx_link_bpt_in_region, info_mappings_callback):
4010 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4012 * procfs.c (solib_mappings_callback): Move function up to avoid
4015 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4017 * procfs.c (find_signalled_thread, find_stop_signal): Move
4018 these functions down to define them only when used.
4020 2010-04-20 Joel Brobecker <brobecker@adacore.com>
4022 * valprint.c (common_val_print): Fix the value before extracting
4024 * ada-lang.c (ada_to_fixed_value): Make this function extern.
4025 * ada-lang.h (ada_to_fixed_value): New function declaration.
4026 * ada-valprint.c (ada_value_print): Use ada_to_fixed_value
4027 to avoid code duplication and fix a bug in the handling of
4028 fixed types contents.
4030 2010-04-20 Tom Tromey <tromey@redhat.com>
4032 * dwarf2read.c (dwarf2_compute_name): Handle DW_AT_linkage_name.
4033 (read_partial_die): Likewise.
4034 (dwarf_attr_name): Likewise.
4036 2010-04-20 Chris Moller <cmoller@redhat.com>
4040 * cp-valprint.c (global): Adding new static array recursion
4042 (cp_print_value_fields, cp_print_static_field): Added new static
4043 array recursion detection code.
4045 2010-04-20 Mark Kettenis <kettenis@gnu.org>
4047 * i386-linux-tdep.c (i386_linux_regset_sections): Size of the
4048 general-purpose register set should be 68 instead of 144.
4049 (i386_linux_sse_regset_sections): Likewise.
4050 (i386_linux_avx_regset_sections): Likewise.
4052 2010-04-20 Stan Shebs <stan@codesourcery.com>
4053 Nathan Sidwell <nathan@codesourcery.com>
4055 * dwarf2loc.c (struct axs_var_loc): New struct.
4056 (dwarf2_tracepoint_var_loc): New function.
4057 (dwarf2_tracepoint_var_access): New function.
4058 (dwarf2_tracepoint_var_ref): Use dwarf2_tracepoint_var_loc, deal
4060 (locexpr_describe_location_piece): New function.
4061 (locexpr_describe_location_1): New function.
4062 (locexpr_describe_location): Call it, update signature.
4063 (loclist_describe_location): Rewrite to loop over locations,
4065 * symtab.h (struct symbol_computed_ops): Add address to
4066 describe_location arguments, return void.
4067 * printcmd.c (address_info): Get context PC, pass to computed
4068 location description.
4069 * tracepoint.c (scope_info): Ditto.
4070 * ax-gdb.c (trace_kludge): Export.
4072 2010-04-20 Tom Tromey <tromey@redhat.com>
4074 * dwarf2-frame.c (decode_frame_entry_1): Handle CIE version 4.
4075 (struct dwarf2_cie) <segment_size>: New field.
4076 * dwarf2read.c (partial_read_comp_unit_head): Accept DWARF 4.
4077 (skip_one_die): Handle DW_FORM_flag_present, DW_FORM_sec_offset,
4079 (read_attribute_value): Handle DW_FORM_flag_present,
4080 DW_FORM_sec_offset, DW_FORM_exprloc.
4081 (dump_die_shallow): Likewise.
4082 (attr_form_is_section_offset): Handle DW_FORM_sec_offset.
4083 (dwarf2_const_value): Handle DW_FORM_exprloc.
4084 (attr_form_is_block): Likewise.
4085 (struct line_header) <maximum_ops_per_instruction>: New field.
4086 (dwarf_decode_line_header): Set new field.
4087 (dwarf_decode_lines): Handle new field.
4089 2010-04-20 Jan Kratochvil <jan.kratochvil@redhat.com>
4091 * f-exp.y: Add new production to recognize the `logical*8' type.
4092 (LOGICAL_S8_KEYWORD): New token.
4093 * f-lang.c (enum f_primitive_types)
4094 <f_primitive_type_logical_s8>: New field.
4095 (f_language_arch_info): Handling `logical*8' type.
4096 (build_fortran_types): Building `logical*8' type.
4097 * f-lang.h (struct builtin_f_type) <builtin_logical_s8>: New field.
4099 2010-04-19 Doug Evans <dje@google.com>
4101 * ser-base.c (generic_readchar): Watch for EOF in read of error_fd.
4102 * ser-pipe.c (pipe_open): Fix file descriptor leaks.
4103 (pipe_close): Ditto.
4105 2010-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
4107 * configure.tgt (x86_64-*-mingw*): Set BUILD_GDBSERVER to yes.
4109 2010-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
4111 * windows-tdep.c (windows_get_tlb_type): Change current_seh.handle
4112 type to void function.
4114 2010-04-19 Stan Shebs <stan@codesourcery.com>
4115 Vladimir Prus <vladimir@codesourcery.com>
4117 * tracepoint.c (tfind_1): Add missing newline, report exit from
4119 * target.c (update_current_target): Make default
4120 to_trace_find return -1.
4122 2010-04-19 Mike Frysinger <vapier@gentoo.org>
4124 * objc-lang.c (find_methods): Move symname check up.
4126 2010-04-19 Pedro Alves <pedro@codesourcery.com>
4128 * ada-lang.c (print_recreate_exception)
4129 <ex_catch_exception_unhandled>: It's "catch exception unhandled",
4130 not "catch unhandled".
4132 2010-04-19 Pedro Alves <pedro@codesourcery.com>
4134 PR breakpoints/8554.
4136 Implement `save-breakpoints'.
4138 * breakpoint.c (save_cmdlist): New.
4139 (breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
4141 (print_recreate_catch_fork): New.
4142 (catch_fork_breakpoint_ops): Install it.
4143 (print_recreate_catch_vfork): New.
4144 (catch_vfork_breakpoint_ops): Install it.
4145 (print_recreate_catch_syscall): New.
4146 (catch_syscall_breakpoint_ops): Install it.
4147 (print_recreate_catch_exec): New.
4148 (catch_exec_breakpoint_ops): Install it.
4149 (print_recreate_exception_catchpoint): New.
4150 (gnu_v3_exception_catchpoint_ops): Install it.
4151 (save_breakpoints): New, based on tracepoint_save_command, but
4152 handle all breakpoint types.
4153 (save_breakpoints_command): New.
4154 (tracepoint_save_command): Rename to...
4155 (save_tracepoints_command): ... this, and reimplement using
4157 (save_command): New.
4158 (_initialize_breakpoints): Install the "save" command prefix.
4159 Install the "save breakpoints" command. Make "save-tracepoints" a
4160 deprecated alias for "save tracepoints".
4161 * breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
4162 * ada-lang.c (print_recreate_exception): New.
4163 (print_recreate_catch_exception): New.
4164 (catch_exception_breakpoint_ops): Install it.
4165 (print_recreate_catch_exception_unhandled): New.
4166 (catch_exception_unhandled_breakpoint_ops): Install it.
4167 (print_recreate_catch_assert): New.
4168 (catch_assert_breakpoint_ops): Install it.
4170 * NEWS: Mention the new `save breakpoints' command. Mention the
4171 new `save tracepoints' alias and that `save-tracepoints' is now
4174 2010-04-18 Pedro Alves <pedro@codesourcery.com>
4178 * tui/tui-out.c: Include cli-out.h.
4179 (tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
4180 (tui_begin, tui_end, tui_field_int, tui_field_skip)
4181 (tui_field_string, tui_field_fmt, tui_spaces, tui_text)
4182 (tui_message, tui_wrap_hint, tui_flush): Delete forward
4184 (struct ui_out_data): Rename to...
4185 (struct tui_ui_out_data): ... this. Remove `stream' and
4186 `suppress_output' fields, and inherit cli_ui_out_data.
4187 (tui_out_data): New typedef.
4188 (tui_ui_out_impl): Don't initialize fields staticaly.
4189 (tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
4190 (tui_begin, tui_end): Delete.
4191 (tui_field_int): Adjust to delegate most work to the base type.
4192 (tui_field_skip): Delete.
4193 (tui_field_string, tui_field_fmt): Adjust comment. Adjust to
4194 delegate most work to the base type.
4195 (tui_spaces): Delete.
4196 (tui_text): Adjust to delegate most work to the base type.
4197 (tui_message): Delete.
4198 (tui_wrap_hint): Delete.
4199 (tui_flush): Delete.
4200 (out_field_fmt): Delete.
4201 (field_separator): Delete.
4202 (tui_out_new): Adjust to initialize the base type.
4203 (_initialize_tui_out): Initialize tui_ui_out_impl.
4204 * cli-out.c (struct ui_out_data): Moved out to cli-out.h, renamed
4206 (cli_out_data): Adjust.
4207 (cli_ui_out_impl): Make extern.
4208 (cli_table_header, cli_field_int, cli_field_skip): Use
4209 uo_field_string instead of cli_field_string.
4210 (cli_redirect): Adjust to use cli_out_data.
4211 (cli_out_data_ctor): New.
4212 (cli_out_new): Use it.
4213 * cli-out.h (struct ui_file): Remove forward declaration.
4214 (struct cli_ui_out_data): New, moved from cli-out.c, and renamed.
4215 (cli_ui_out_impl): Declare.
4216 (cli_out_data_ctor): Declare.
4217 * ui-out.c (struct ui_out) <data>: Change type to void pointer.
4218 (uo_field_string): No longer static.
4219 (ui_out_data): Change return type to void pointer.
4220 (ui_out_new): Change `data' parameter type to void pointer.
4221 * ui-out.h (struct ui_out_data): Don't forward declare.
4222 (ui_out_data): Change return type to void pointer.
4223 (ui_out_new): Change `data' parameter type to void pointer.
4224 (uo_field_string): Declare.
4226 2010-04-17 Pedro Alves <pedro@codesourcery.com>
4228 * ui-file.c (tee_file_isatty): Return whether `tee->one' is a tty,
4229 instead of always false.
4231 2010-04-17 H.J. Lu <hongjiu.lu@intel.com>
4234 * amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Support
4237 2010-04-17 Pedro Alves <pedro@codesourcery.com>
4239 * breakpoint.c (watchpoints_triggered): Use
4240 is_hardware_watchpoint.
4241 (watchpoints_triggered): Ditto.
4242 (bpstat_check_location): Use is_watchpoint and
4243 is_hardware_watchpoint.
4244 (bpstat_check_watchpoint): Use is_watchpoint and
4245 is_hardware_watchpoint.
4246 (bpstat_stop_status): Fix comment.
4247 (user_settable_breakpoint): Use is_watchpoint.
4248 (hw_watchpoint_used_count): Use is_hardware_watchpoint.
4249 (disable_watchpoints_before_interactive_call_start): Use
4251 (enable_watchpoints_after_interactive_call_stop): Use
4253 (clear_command): Use is_watchpoint.
4254 (do_enable_breakpoint): Use is_watchpoint.
4256 2010-04-16 Mike Frysinger <vapier@gentoo.org>
4258 * solib-frv.c (enable_break1_done): Delete.
4259 (enable_break2): Do not check enable_break1_done. Move the
4260 enable_break2_done setting and call to
4261 remove_solib_event_breakpoints() to the end. Return without
4262 warning when the contents of _dl_debug_addr are 0.
4263 (enable_break): Do not set enable_break1_done.
4264 (frv_clear_solib): Likewise.
4266 2010-04-16 Kevin Buettner <kevinb@redhat.com>
4268 * m32c-tdep.c (m32c_m16c_address_to_pointer): Print warning
4269 instead of an error if no PLT entry is found. Return a
4270 potentially useful result.
4271 (m32c_m16c_pointer_to_address): Add code to search for function
4272 address when no .plt entry is found.
4274 2010-04-16 Stan Shebs <stan@codesourcery.com>
4276 * tracepoint.c (trace_variable_command): Run a cleanup.
4278 2010-04-16 Pierre Muller <muller@ics.u-strasbg.fr>
4280 * p-lang.c (pascal_one_char): Do not restrict C to 0..255 range.
4282 2010-04-16 Pierre Muller <muller@ics.u-strasbg.fr>
4284 Support for Windows OS Thread Information Block.
4285 * NEWS: Document new feature.
4286 * remote.c (PACKET_qGetTIBAddr): New enum element.
4287 (remote_get_tib_address): New function.
4288 (init_remote_ops): Set to_get_tib_address field
4289 to remote_get_tib_address.
4290 (_initialize_remote): Add add_packet_config_cmd
4291 for PACKET_qGetTIBAddr.
4292 * target.c (update_current_target): Set default value for
4293 new to_get_tib_address field.
4294 * target.h (target_ops): New field to_get_tib_address.
4295 (target_get_tib_address): New macro.
4296 * windows-nat.c (thread_info): Add thread_local_base field.
4297 (windows_add_thread): Add tlb argument of type 'void *'.
4298 (fake_create_process): Adapt windows_add_thread call.
4299 (get_windows_debug_event): Idem.
4300 (windows_get_tib_address): New function.
4301 (init_windows_ops): Set to_get_tib_address field
4302 to remote_get_tib_address.
4303 (_initialize_windows_nat): Replace info_w32_cmdlist
4304 initialization by a call to init_w32_command_list.
4305 (info_w32_command, info_w32_cmdlist): Removed from here...
4306 to windows-tdep.c file.
4307 * windows-tdep.h (info_w32_cmdlist): Declare.
4308 (init_w32_command_list): New external function
4310 * windows-tdep.c: Add several headers.
4311 (info_w32_cmdlist): to here, made global.
4312 (thread_information_32): New struct.
4313 (thread_information_64): New struct.
4314 (TIB_NAME): New char array.
4315 (MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
4316 (maint_display_all_tib): New static variable.
4317 (windows_get_tlb_type): New function.
4318 (tlb_value_read, tlb_value_write): New functions.
4319 (tlb_value_funcs): New static struct.
4320 (tlb_make_value): New function.
4321 (display_one_tib): New function.
4322 (display_tib): New function.
4323 (show_maint_show_all_tib):New function.
4324 (info_w32_command): Moved from windows-nat.c.
4325 (init_w32_command_list): New function.
4326 (_initialize_windows_tdep): New function.
4327 New "maint set/show show-all-tib" command
4328 New "$_tlb" internal variable.
4330 2010-04-16 Joel Brobecker <brobecker@adacore.com>
4332 * tui/tui-regs.c (tui_display_register): Add comment about
4334 * tui/tui-stack.c (tui_show_locator_content): Ditto.
4336 2010-04-15 Stan Shebs <stan@codesourcery.com>
4338 * frame.c: Include tracepoint.h.
4339 (get_current_frame): Allow a trace frame to be an alternate source
4340 of stack frame data.
4341 * tracepoint.c (tfind_1): Don't try to get current stack frame if
4344 2010-04-15 Pedro Alves <pedro@codesourcery.com>
4346 * ppc-linux-tdep.c (bsd_uthread_solib_loaded): Always pass 0 for
4348 * solib-spu.c (spu_solib_loaded): Always pass 0 for flags.
4350 2010-04-15 Doug Evans <dje@google.com>
4352 * NEWS: Add entry for python program space support.
4353 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-progspace.o.
4354 (SUBDIR_PYTHON_SRCS): Add py-progspace.c.
4355 (py-progspace.o): New rule.
4356 * python/py-prettyprint.c (find_pretty_printer_from_objfiles): New
4358 (find_pretty_printer_from_progspace): New function.
4359 (find_pretty_printer_from_gdb): New function.
4360 (find_pretty_printer): Rewrite.
4361 * python/py-progspace.c: New file.
4362 * python/python-internal.h (program_space): Add forward decl.
4363 (pspace_to_pspace_object, pspy_get_printers): Declare.
4364 (gdbpy_initialize_pspace): Declare.
4365 * python/python.c: #include "progspace.h".
4366 (gdbpy_get_current_progspace, gdbpy_progspaces): New functions.
4367 (_initialize_python): Call gdbpy_initialize_pspace.
4368 (GdbMethods): Add current_progspace, progspaces.
4370 Add -s option to source command.
4371 * NEWS: Document new option.
4372 * cli/cli-cmds.c (find_and_open_script): Add function comment.
4373 Delete from_tty and cleanupp args. Split filep arg into file and
4374 full_pathp. New arg search_path.
4375 (source_script_from_stream): New function.
4376 (source_script_with_search): New function.
4377 (source_script): Rewrite.
4378 (source_command): Parse "-s" option.
4379 (init_cli_cmds): Add "-s" docs to source command help, and reformat.
4380 * python/python.c (source_python_script): Make file arg a const char *.
4381 Don't call fclose, leave for caller.
4382 * python/python.h (source_python_script): Update.
4384 2010-04-14 Daniel Jacobowitz <dan@codesourcery.com>
4385 Pedro Alves <pedro@codesourcery.com>
4387 Avoid rereading shared libraries that haven't changed.
4389 * solib.c (free_so_symbols): New function, from ...
4390 (free_so): ... here. Call it.
4391 (solib_read_symbols): Don't warn here if symbols have already been
4393 (solib_add): Warn here instead, if a pattern was specified.
4394 (reload_shared_libraries_1): New.
4395 (reload_shared_libraries): Rewrite to not fetch the library list.
4397 2010-04-14 Doug Evans <dje@google.com>
4399 * source.c (openp): Strip DOS drive letter if present before
4400 concatenating string to search path.
4402 2010-04-14 Pedro Alves <pedro@codesourcery.com>
4404 * objfiles.h (gdb_bfd_close_or_warn): Declare.
4405 * objfiles.c (gdb_bfd_close_or_warn): New.
4406 * corelow.c: Include objfiles.h
4407 (core_close): Use gdb_bfd_close_or_warn.
4408 * elfread.c (build_id_verify): Ditto.
4409 * exec.c (exec_close, exec_close_1): Ditto.
4411 2010-04-14 Daniel Jacobowitz <dan@codesourcery.com>
4412 Pedro Alves <pedro@codesourcery.com>
4414 Group errors for many missing shared libraries.
4416 * solist.h (struct so_list): Remove from_tty.
4417 * solib.c (solib_bfd_open): Return NULL if we failed to open a BFD.
4418 (solib_map_sections): Take so_list argument. Return 0 if we
4419 failed to open a BFD. Add target sections here.
4420 (symbol_add_stub): Delete.
4421 (solib_read_symbols): Inline symbol_add_stub. Use current flags,
4422 not from_tty copied from the so_list. Don't warn a second time
4423 for a missing library.
4424 (update_solib_list): Don't save from_tty. Use TRY_CATCH. Do not
4425 add to the section table here. Print out a single warning for all
4427 * bsd-uthread.c (bsd_uthread_solib_loaded): Always pass 0 for
4430 2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
4432 * python/py-block.c (gdbpy_block_for_pc): Use i8n to encompass
4433 error/warning messages. Capitalize and use complete sentences.
4434 (blpy_block_syms_iternext): Likewise.
4435 * python/py-cmd.c (parse_command_name, cmdpy_init): Likewise.
4436 * python/py-frame.c (FRAPY_REQUIRE_VALID, frapy_block)
4437 (frame_info_to_frame_object, frapy_read_var)
4438 (gdbpy_frame_stop_reason_string): Likewise.
4439 * python/py-lazy-string.c (stpy_convert_to_value)
4440 (gdbpy_create_lazy_string_object): Likewise.
4441 * python/py-objfile.c (objfpy_set_printers): Likewise.
4442 * python/py-prettyprint.c (gdbpy_default_visualizer): Likewise.
4443 * python/python.c (parameter_to_python): Likewise.
4444 * python/py-type.c (typy_range, typy_target): Likewise.
4445 * python/py-value.c (valpy_cast, valpy_length, valpy_getitem)
4446 (valpy_richcompare, valpy_int, valpy_long, valpy_float): Likewise.
4449 2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
4453 * python/py-prettyprint.c (pretty_print_one_value): Test for
4455 (print_string_repr): Test for Py_None. Set flags accordingly.
4456 Return value depending on return type.
4457 (print_children): Take a value indicating whether data was printed
4458 before this function was called. Alter output accordingly.
4459 (apply_val_pretty_printer): Capture return value from
4460 print_string_repr and pass to print_children.
4462 2010-04-13 Mark Kettenis <kettenis@gnu.org>
4465 * i386-linux-tdep.c (i386_linux_regset_sections): Remove extended
4466 register note sections.
4467 (i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
4469 (i386_linux_init_abi): Install list of supported register note
4470 sections that matches the target description.
4472 2010-04-13 Pedro Alves <pedro@codesourcery.com>
4474 * remote.c (remote_get_noisy_reply): Don't error out on empty
4476 (remote_start_remote): Update and merge tracepoints and trace
4477 state variables as long as the target supports tracepoints.
4478 (remote_trace_init): Fix prototype.
4479 (remote_download_trace_state_variable): Validate reply.
4480 (remote_trace_set_readonly_regions): Fix prototype.
4481 (remote_trace_start): Fix prototype. Check for empty reply.
4482 (remote_get_trace_status): Small cleanup.
4483 (remote_trace_stop): Fix prototype. Check for empty reply.
4484 (remote_trace_find): Check for empty reply.
4485 (remote_save_trace_data): Validate reply.
4486 (remote_set_disconnected_tracing): Check for empty reply, and
4488 (remote_set_circular_trace_buffer): Ditto.
4490 2010-04-13 Pierre Muller <muller@ics.u-strasbg.fr>
4492 Suppress unused value warning during compilation.
4493 * tui/tui-regs.c (tui_display_register): Cast wstandout and wstandend
4495 * tui/tui-stack.c (tui_show_locator_content): Likewise.
4497 2010-04-12 Stan Shebs <stan@codesourcery.com>
4499 * tracepoint.c (tfile_xfer_partial): Check read result.
4501 2010-04-12 Mike Frysinger <vapier@gentoo.org>
4503 * remote-m32r-sdi.c (m32r_files_info): Add const to local "file" var.
4504 * remote-sim.c (gdbsim_files_info): Likewise.
4506 2010-04-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
4508 * arm-tdep.h (gdb_regnum): Add ARM_FPSCR_REGNUM
4509 * arm-linux-nat.c (arm_linux_vfp_register_count): New
4511 (fetch_vfp_registers): New function to fetch VFP registers.
4512 (store_vfp_registers): New function to store VFP registers.
4513 (arm_linux_fetch_inferior_registers): Add support for VFP
4515 (arm_linux_store_inferior_registers): Likewise.
4516 (arm_linux_read_description): Likewise.
4517 (_initialize_arm_linux_nat): Delay initialising iWMMX tdesc
4520 2010-04-11 H.J. Lu <hongjiu.lu@intel.com>
4522 * amd64-tdep.c (amd64_supply_xstateregset): Remove the unused
4524 (amd64_collect_xstateregset): Likewise.
4526 2010-04-09 Stan Shebs <stan@codesourcery.com>
4528 * tracepoint.c (trace_status_mi): Report frames created.
4530 * tracepoint.c (trace_dump_command): Include default-collect
4533 2010-04-09 Ulrich Weigand <uweigand@de.ibm.com>
4535 * symtab.c (find_function_start_sal): Never return SAL pointing
4536 before function start address, even if line info is missing.
4538 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4540 * NEWS: Mention tracepoints support.
4542 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4544 * tracepoint.c (trace_status_mi): Report disconnected tracing and
4545 circular trace buffer statuses.
4547 2010-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
4549 * config/djgpp/fnchange.lst: Fix typo in translations for
4550 symbol-without-target_section.exp and symbol-without-target_section.c.
4552 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4554 * breakpoint.c (condition_command): Pass condition expression to
4555 set_breakpoint_condition stripped from breakpoint number.
4557 2010-04-09 Phil Muldoon <pmuldoon@redhat.com>
4558 Thiago Jung Bauermann <bauerman@br.ibm.com>
4559 Tom Tromey <tromey@redhat.com>
4561 * breakpoint.c (condition_command): Simplify. Move condition
4563 (set_breakpoint_condition): ... here. New function.
4564 * breakpoint.h (set_breakpoint_condition): Declare.
4565 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpoint.
4566 (SUBDIR_PYTHON_SRCS): Likewise.
4567 (py-breakpoint.o): New rule.
4568 * python/py-breakpoint.c: New file.
4569 * python/python-internal.h (gdbpy_breakpoints)
4570 (gdbpy_initialize_breakpoints): Declare.
4571 (GDB_PY_SET_HANDLE_EXCEPTION) Define.
4573 2010-04-09 Pedro Alves <pedro@codesourcery.com>
4575 * regformats/regdat.sh: Include server.h. Don't include
4578 2010-04-08 Stan Shebs <stan@codesourcery.com>
4579 Pedro Alves <pedro@codesourcery.com>
4581 * tracepoint.h (struct trace_status): New fields disconnected_tracing
4582 and circular_buffer.
4583 (disconnect_tracing): Rename from disconnect_or_stop_tracing.
4584 * tracepoint.c (trace_status_command): Display target's status for
4585 disconnected tracing and circular buffer.
4586 (disconnect_tracing): Rename from disconnect_or_stop_tracing, add
4587 query for non-disconnected-tracing case, remove the stop_tracing
4589 (tfile_open): Clear disconnected and circular buffer status.
4590 (trace_save): Save disconnected and circular buffer status.
4591 (parse_trace_status): Parse disconnected and circular buffer status,
4592 also recognize disconnected as a stop reason.
4593 * remote.c (remote_set_disconnected_tracing): Only set
4594 QTDisconnected if the remote end supports disconnected tracing.
4595 Warn otherwise, if trying to enable disconnected tracing.
4596 * infcmd.c (detach_command): Update disconnect_tracing call.
4597 * cli/cli-cmds.c (quit_command): Ditto.
4599 2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
4601 * i387-tdep.c (i387_collect_xsave): Replace abort with
4604 2010-04-08 Stan Shebs <stan@codesourcery.com>
4606 * breakpoint.c (default_collect_info): New function.
4607 (breakpoints_info): Call it.
4608 (maintenance_info_breakpoints): Ditto.
4609 (tracepoints_info): Ditto.
4611 2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
4613 * i387-tdep.c (i387_collect_xsave): Re-indent.
4615 2010-04-08 H.J. Lu <hongjiu.lu@intel.com>
4617 * i386-linux-nat.c (have_ptrace_getfpxregs): Initialize to -1
4618 if HAVE_PTRACE_GETFPXREGS is defined.
4619 (i386_linux_read_description): Set have_ptrace_getfpxregs and
4620 have_ptrace_getregset to 0 if ptrace PTRACE_GETFPXREGS failed.
4622 * i386-linux-tdep.c: Include "features/i386/i386-mmx-linux.c"
4623 (i386_linux_core_read_description): Return tdesc_i386_mmx_linux
4624 if .reg-xfp section doesn't exist.
4625 (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_mmx_linux.
4627 * i386-linux-tdep.h (tdesc_i386_mmx_linux): New.
4629 * i386-tdep.c: Include "features/i386/i386-mmx.c".
4630 (i386_go32_init_abi): Set tdesc to tdesc_i386_mmx.
4631 (i386_validate_tdesc_p): Make org.gnu.gdb.i386.sse optional. Set
4632 xcr0 to I386_XSTATE_X87_MASK if SSE isn't available.
4633 (i386_gdbarch_init): Update comments.
4634 (_initialize_i386_tdep): Call initialize_tdesc_i386_mmx.
4636 * common/i386-xstate.h (I386_XSTATE_X87_MASK): New.
4638 * config/djgpp/fnchange.lst: Add i386 MMX XML files.
4640 * features/Makefile (i386/i386-mmx-expedite): New.
4641 (i386/i386-mmx-linux-expedite): Likewise.
4642 ($(outdir)/i386/i386-mmx.dat): Likewise.
4643 ($(outdir)/i386/i386-mmx-linux.dat): Likewise.
4645 * features/i386/i386-mmx-linux.c: New.
4646 * features/i386/i386-mmx-linux.xml: Likewise.
4647 * features/i386/i386-mmx.c: Likewise.
4648 * features/i386/i386-mmx.xml: Likewise.
4649 * regformats/i386/i386-mmx-linux.dat: Likewise.
4650 * regformats/i386/i386-mmx.dat: Likewise.
4652 * features/Makefile (WHICH): Add i386/i386-mmx and
4653 i386/i386-mmx-linux.
4655 2010-04-08 Doug Evans <dje@google.com>
4657 * source.c (openp): Skip $cdir in PATH.
4659 2010-04-08 Phil Muldoon <pmuldoon@redhat.com>
4662 * python/py-lazy-string.c (stpy_convert_to_value): Check for
4664 (gdbpy_create_lazy_string_object): Allow strings with a NULL
4665 address and a zero length.
4667 2010-04-08 Hui Zhu <teawater@gmail.com>
4669 * i386-tdep.c (i386_process_record): Add support for insn
4672 2010-04-07 Doug Evans <dje@google.com>
4674 * python/python.c (source_python_script): Use ensure_python_env
4675 to prepare environment for script.
4677 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4679 * amd64-linux-nat.c: Include "regset.h", "elf/common.h",
4680 <sys/uio.h> and "i386-xstate.h".
4681 (PTRACE_GETREGSET): New.
4682 (PTRACE_SETREGSET): Likewise.
4683 (have_ptrace_getregset): Likewise.
4684 (amd64_linux_gregset64_reg_offset): Include 16 upper YMM
4686 (amd64_linux_gregset32_reg_offset): Include 8 upper YMM
4688 (amd64_linux_fetch_inferior_registers): Support PTRACE_GETFPREGS.
4689 (amd64_linux_store_inferior_registers): Likewise.
4690 (amd64_linux_read_description): Check and enable AVX target
4693 * amd64-linux-tdep.c: Include "regset.h", "i386-linux-tdep.h"
4694 and "features/i386/amd64-avx-linux.c".
4695 (amd64_linux_regset_sections): New.
4696 (amd64_linux_core_read_description): Check and enable AVX
4698 (amd64_linux_init_abi): Set xsave_xcr0_offset. Call
4699 set_gdbarch_core_regset_sections.
4700 (_initialize_amd64_linux_tdep): Call
4701 initialize_tdesc_amd64_avx_linux.
4703 * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Replace
4704 AMD64_MXCSR_REGNUM with AMD64_YMM15H_REGNUM.
4705 (tdesc_amd64_avx_linux): New.
4706 (amd64_linux_update_xstateregset): Likewise.
4708 * amd64-tdep.c: Include "features/i386/amd64-avx.c".
4709 (amd64_ymm_names): New.
4710 (amd64_ymmh_names): Likewise.
4711 (amd64_register_name): Likewise.
4712 (amd64_supply_xstateregset): Likewise.
4713 (amd64_collect_xstateregset): Likewise.
4714 (amd64_supply_xsave): Likewise.
4715 (amd64_collect_xsave): Likewise.
4716 (AMD64_NUM_REGS): Removed.
4717 (amd64_dwarf_reg_to_regnum): Return %ymmN register number for
4718 %xmmN if AVX is available.
4719 (amd64_pseudo_register_name): Support pseudo YMM registers.
4720 (amd64_regset_from_core_section): Support .reg-xstate section.
4721 (amd64_init_abi): Set ymmh_register_names, num_ymm_regs
4722 and ymm0h_regnum. Call set_gdbarch_register_name.
4723 (amd64_init_abi): Call initialize_tdesc_amd64_avx.
4725 * amd64-tdep.h (amd64_regnum): Add AMD64_YMM0H_REGNUM and
4726 AMD64_YMM15H_REGNUM.
4727 (AMD64_NUM_REGS): New.
4728 (amd64_supply_xsave): Likewise.
4729 (amd64_collect_xsave): Likewise.
4730 (amd64_register_name): Removed.
4731 (amd64_register_type): Likewise.
4733 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4735 * i387-tdep.c: Include "i386-xstate.h".
4736 (XSAVE_XSTATE_BV_ADDR): New.
4737 (xsave_avxh_offset): Likewise.
4738 (XSAVE_AVXH_ADDR): Likewise.
4739 (i387_supply_xsave): Likewise.
4740 (i387_collect_xsave): Likewise.
4742 * i387-tdep.h (I387_NUM_YMM_REGS): New.
4743 (I387_YMM0H_REGNUM): Likewise.
4744 (I387_YMMENDH_REGNUM): Likewise.
4745 (i387_supply_xsave): Likewise.
4746 (i387_collect_xsave): Likewise.
4748 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4750 * i386-linux-nat.c: Include "regset.h", "elf/common.h",
4751 <sys/uio.h> and "i386-xstate.h".
4752 (PTRACE_GETREGSET): New.
4753 (PTRACE_SETREGSET): Likewise.
4754 (fetch_xstateregs): Likewise.
4755 (store_xstateregs): Likewise.
4756 (GETXSTATEREGS_SUPPLIES): Likewise.
4757 (regmap): Include 8 upper YMM registers.
4758 (i386_linux_fetch_inferior_registers): Support XSAVE extended
4760 (i386_linux_store_inferior_registers): Likewise.
4761 (i386_linux_read_description): Check and enable AVX target
4764 * i386-linux-tdep.c: Include "regset.h", "i387-tdep.h",
4765 "i386-xstate.h" and "features/i386/i386-avx-linux.c".
4766 (i386_linux_regset_sections): Add ".reg-xstate".
4767 (i386_linux_gregset_reg_offset): Include 8 upper YMM registers.
4768 (i386_linux_core_read_xcr0): New.
4769 (i386_linux_core_read_description): Check and enable AVX target
4771 (i386_linux_init_abi): Set xsave_xcr0_offset.
4772 (_initialize_i386_linux_tdep): Call
4773 initialize_tdesc_i386_avx_linux.
4775 * i386-linux-tdep.h (I386_LINUX_ORIG_EAX_REGNUM): Replace
4776 I386_SSE_NUM_REGS with I386_AVX_NUM_REGS.
4777 (i386_linux_core_read_xcr0): New.
4778 (tdesc_i386_avx_linux): Likewise.
4779 (I386_LINUX_XSAVE_XCR0_OFFSET): Likewise.
4781 * i386-tdep.c: Include "i386-xstate.h" and
4782 "features/i386/i386-avx.c".
4783 (i386_ymm_names): New.
4784 (i386_ymmh_names): Likewise.
4785 (i386_ymmh_regnum_p): Likewise.
4786 (i386_ymm_regnum_p): Likewise.
4787 (i386_xmm_regnum_p): Likewise.
4788 (i386_register_name): Likewise.
4789 (i386_ymm_type): Likewise.
4790 (i386_supply_xstateregset): Likewise.
4791 (i386_collect_xstateregset): Likewise.
4792 (i386_sse_regnum_p): Removed.
4793 (i386_pseudo_register_name): Support pseudo YMM registers.
4794 (i386_pseudo_register_type): Likewise.
4795 (i386_pseudo_register_read): Likewise.
4796 (i386_pseudo_register_write): Likewise.
4797 (i386_dbx_reg_to_regnum): Return %ymmN register number for
4798 %xmmN if AVX is available.
4799 (i386_regset_from_core_section): Support .reg-xstate section.
4800 (i386_register_reggroup_p): Supper upper YMM and YMM registers.
4801 (i386_process_record): Replace i386_sse_regnum_p with
4803 (i386_validate_tdesc_p): Support org.gnu.gdb.i386.avx feature.
4804 Set ymmh_register_names, num_ymm_regs, ymm0h_regnum and xcr0.
4805 (i386_gdbarch_init): Set xstateregset. Set xsave_xcr0_offset.
4806 Call set_gdbarch_register_name. Replace I386_SSE_NUM_REGS with
4807 I386_AVX_NUM_REGS. Set ymmh_register_names, ymm0h_regnum and
4808 num_ymm_regs. Add num_ymm_regs to set_gdbarch_num_pseudo_regs.
4810 (_initialize_i386_tdep): Call initialize_tdesc_i386_avx.
4812 * i386-tdep.h (gdbarch_tdep): Add xstateregset, ymm0_regnum,
4813 xcr0, xsave_xcr0_offset, ymm0h_regnum, ymmh_register_names and
4815 (i386_regnum): Add I386_YMM0H_REGNUM, and I386_YMM7H_REGNUM.
4816 (I386_AVX_NUM_REGS): New.
4817 (i386_xmm_regnum_p): Likewise.
4818 (i386_ymm_regnum_p): Likewise.
4819 (i386_ymmh_regnum_p): Likewise.
4821 * common/i386-xstate.h: New.
4823 2010-04-07 H.J. Lu <hongjiu.lu@intel.com>
4825 * config/djgpp/fnchange.lst: Add x86 AVX XML files.
4827 * features/Makefile (WHICH): Add i386/i386-avx,
4828 i386/i386-avx-linux, i386/x86-64-avx and i386/x86-64-avx-linux.
4829 (i386/i386-avx-expedite): New.
4830 (i386/i386-avx-linux-expedite): Likewise.
4831 (i386/x86-64-avx-expedite):Likewise.
4832 (i386/x86-64-avx-linux-expedite): Likewise.
4833 ($(outdir)/i386/i386-avx.dat): New dependency.
4834 ($(outdir)/i386/i386-avx-linux.dat): Likewise.
4835 ($(outdir)/i386/x86-avx-64.dat): Likewise.
4836 ($(outdir)/i386/x86-64-avx-linux.dat): Likewise.
4838 * features/i386/32bit-avx.xml: New.
4839 * features/i386/64bit-avx.xml: Likewise.
4840 * features/i386/i386-avx-linux.c: Likewise.
4841 * features/i386/i386-avx-linux.xml: Likewise.
4842 * features/i386/i386-avx.c: Likewise.
4843 * features/i386/i386-avx.xml: Likewise.
4844 * features/i386/x86-64-avx-linux.c: Likewise.
4845 * features/i386/x86-64-avx-linux.xml: Likewise.
4846 * features/i386/x86-64-avx.c: Likewise.
4847 * features/i386/x86-64-avx.xml: Likewise.
4848 * regformats/i386/i386-avx-linux.dat: Likewise.
4849 * regformats/i386/i386-avx.dat: Likewise.
4850 * regformats/i386/x86-64-avx-linux.dat: Likewise.
4851 * regformats/i386/x86-64-avx.dat: Likewise.
4853 2010-04-07 Doug Evans <dje@google.com>
4855 * top.c (source_file_name): Make const char *.
4856 * top.h (source_file_name): Update.
4857 * cli/cli-script.c (source_cleanup_lines_args): Make old_file
4859 (script_from_file): Change `file' arg to const char *.
4860 * cli/cli-script.h (script_from_file): Update.
4862 2010-04-06 Doug Evans <dje@google.com>
4864 * cli/cli-cmds.c (source_command): Run cleanups.
4866 2010-04-06 Stan Shebs <stan@codesourcery.com>
4868 * defs.h (char_ptr): Move typedef here from...
4869 * ada-lang.c (char_ptr): Remove.
4870 * charset.c (char_ptr): Remove.
4871 * tracepoint.h (struct uploaded_string): Remove.
4872 (struct uploaded_tp): Use vectors for string arrays.
4873 * tracepoint.c (trace_save): Use vectors of actions.
4874 (parse_tracepoint_definition): Ditto.
4875 (get_uploaded_tp): Clear vectors.
4876 * breakpoint.c (create_tracepoint_from_upload): Use vectors.
4877 (next_cmd): Change to an int.
4878 (read_next_cmd): Use vector of command strings.
4880 2010-04-06 Doug Evans <dje@google.com>
4882 * top.h (source_script, cd_command): Delete.
4883 * main.c: #include "cli/cli-cmds.h"
4885 2010-04-06 Kevin Buettner <kevinb@redhat.com>
4887 * m32c-tdep.c (make_types): When calling `arch_type', pass size of
4888 type in bytes, not bits.
4890 2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
4892 * stabsread.c (define_symbol): Add support for char
4893 and string constants.
4895 2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
4897 Remove remaining "%ll" uses.
4898 * go32-nat.c (go32_pte_for_address): Replace "0x%llx" using
4900 * rs6000-nat.c (rs6000_ptrace64): Idem.
4901 * solib-pa64.c (pa64_current_sos): Idem.
4902 * solib-spu.c (spu_current_sos): Idem.
4903 * linux-nat.c (linux_nat_find_memory_regions): Replace "%lld" using
4905 * nto-procfs.c (procfs_meminfo): Replace "0x%016llx" using
4907 * sh64-tdep.c (sh64_show_media_regs): Idem.
4909 2010-04-05 Stan Shebs <stan@codesourcery.com>
4911 * tracepoint.c: Include gdbcore.h.
4912 (tfile_xfer_partial): Return partial results, also try reading
4914 (tfile_has_all_memory): New function.
4915 (init_tfile_ops): Use it.
4917 2010-04-05 Sergio Durigan Junior <sergiodj@redhat.com>
4920 * xml-syscall.c (my_gdb_datadir): New variable to keep track of
4921 the changes in data-directory.
4922 (init_sysinfo): Reload the syscall XML file if the data-directory
4925 2010-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
4928 * breakpoint.c (bpstat_stop_status): Use bpstat_causes_stop.
4930 2010-04-04 Stan Shebs <stan@codesourcery.com>
4931 Nathan Sidwell <nathan@codesourcery.com>
4933 * breakpoint.c (breakpoint_1): Add filter argument, return number of
4934 breakpoints printed.
4935 (is_hardware_watchpoint): Make argument const.
4936 (is_watchpoint): Ditto.
4937 (is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
4939 (breakpoints_info): Pass NULL to breakpoint_1.
4940 (maintenance_info_breakpoints): Ditto.
4941 (watchpoints_info): New function.
4942 (tracepoints_info): Use breakpoint_1 filter.
4943 (set_ignore_count): Warn that tracepoint ignore count will be ignored.
4944 (_initialize_breakpoint): Make "info watchpoints" its own command.
4945 * breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
4946 * mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
4948 2010-04-04 Stan Shebs <stan@codesourcery.com>
4950 * tracepoint.c (tfile_fetch_registers): Add fallback case.
4952 2010-04-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4954 * infcmd.c (run_command_1): Call proceed with regcache_read_pc address.
4955 * config/djgpp/fnchange.lst: Add translation for break-entry.exp.
4957 2010-04-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4959 * breakpoint.c (bpstat_find_step_resume_breakpoint): Remove.
4960 * breakpoint.h (bpstat_find_step_resume_breakpoint): Remove.
4962 2010-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
4964 * dwarf2read.c (read_namespace_type): Use common "return set_die_type"
4967 2010-04-02 Hui Zhu <teawater@gmail.com>
4969 * i386-tdep.c (OT_DQUAD): New enum.
4970 (i386_process_record): Add code for MMX, 3DNow!, SSE, SSE2,
4971 SSE3, SSSE3 and SSE4.
4973 2010-04-02 Hui Zhu <teawater@gmail.com>
4975 * i386-tdep.c (i386_record_lea_modrm_addr): Remove useless
4978 2010-04-02 Pedro Alves <pedro@codesourcery.com>
4980 * tracepoint.c (trace_dump_actions): New, factored out from
4981 trace_dump_command, and adjusted to recurse into while-stepping's
4983 (trace_dump_command): Use it.
4985 2010-04-02 Pedro Alves <pedro@codesourcery.com>
4987 * breakpoint.h (struct counted_command_line): Moved definition to
4988 breakpoint.c, and forward declare.
4989 (breakpoint_commands): Declare.
4990 * breakpoint.c (struct counted_command_line): Moved here.
4991 (breakpoint_commands): New.
4992 * tracepoint.c (encode_actions): Use breakpoint_commands.
4993 * remote.c (remote_download_tracepoint): Ditto.
4995 2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
4997 * remote.c (remote_parse_stop_reply): Use hex_string instead
4998 of phex_nz for error.
5000 2010-04-01 Stan Shebs <stan@codesourcery.com>
5001 Nathan Sidwell <nathan@codesourcery.com>
5003 * tracepoint.h (enum actionline_type): Remove.
5004 (validate_actionline): Change return to void.
5005 * tracepoint.c (report_agent_reqs_errors): New function.
5006 (validate_actionline): Call it, change return to void, report errors
5008 (collect_symbol): Call report_agent_reqs_errors.
5009 (encode_actions_1): Ditto.
5010 (encode_actions): Don't expect a result from validate_actionline.
5012 2010-04-01 Stan Shebs <stan@codesourcery.com>
5014 * tracepoint.c (trace_start_command): Confirm if trace is running.
5015 (trace_stop_command): Error if trace not running.
5017 2010-04-01 H.J. Lu <hongjiu.lu@intel.com>
5019 * amd64-tdep.c (amd64_byte_names): Add "ah", "bh", "ch", "dh".
5020 (AMD64_NUM_LOWER_BYTE_REGS): New.
5021 (amd64_pseudo_register_read): Handle "ah", "bh", "ch", "dh".
5022 (amd64_pseudo_register_write): Likewise.
5023 (amd64_init_abi): Set num_byte_regs to 20.
5025 2010-04-01 Pedro Alves <pedro@codesourcery.com>
5027 * breakpoint.c (multi_start, multi_end, last_was_multi): Delete.
5028 (prev_breakpoint_count): New.
5029 (set_breakpoint_count): Adjust.
5030 (rbreak_start_breakpoint_count): New.
5031 (start_rbreak_breakpoints): Adjust.
5032 (end_rbreak_breakpoints): Adjust.
5033 (struct commands_info) <arg>: New field.
5034 (do_map_commands_command): Tweak output to include breakpoint spec
5036 (commands_command_1): Adjust. Avoid setting an xfree cleanup if
5037 ARG was empty on entry. Set INFO's arg.
5038 (create_breakpoint): Adjust.
5040 * NEWS: Clarify `commands' changes.
5042 2010-04-01 Pedro Alves <pedro@codesourcery.com>
5044 * tracepoint.c: Include stack.h.
5045 (struct add_local_symbols_data): New.
5046 (do_collect_symbol): New.
5047 (add_local_symbols): Rewrite using iterate_over_block_arg_vars and
5048 iterate_over_block_local_vars.
5049 * stack.c (print_block_frame_locals): Rewrite as ...
5050 (iterate_over_block_locals): ... this. Take a callback function
5051 pointer and generic data pointer, and call that instead of
5052 print_variable_and_value.
5053 (struct print_variable_and_value_data): New.
5054 (do_print_variable_and_value): New.
5055 (iterate_over_block_local_vars): New, abstracted out from
5056 print_frame_local_vars.
5057 (print_frame_local_vars): Rewrite using
5058 iterate_over_block_local_vars.
5059 (iterate_over_block_arg_vars): New, abstracted out from
5060 print_frame_arg_vars.
5061 (print_frame_arg_vars): Rewrite using iterate_over_block_arg_vars.
5062 * stack.h (iterate_over_block_arg_local_vars_cb): New typedef.
5063 (iterate_over_block_arg_vars, iterate_over_block_local_vars): Declare.
5065 2010-03-31 Richard Earnshaw <rearnsha@arm.com>
5067 * arm-tdep.c (thumb_get_next_pc_raw): Correctly detect TBH
5068 instructions. Use the PC+4 if the base of the TBB or TBH is the
5071 2010-03-31 Jan Kratochvil <jan.kratochvil@redhat.com>
5073 Fix crash on reading wrong function declaration DWARF.
5074 * dwarf2read.c (read_subroutine_type): New variable void_type.
5075 Pre-fill all TYPE_FIELD_TYPEs. Move nparams and iparams initialization
5076 more close to their use.
5078 2010-03-31 Stan Shebs <stan@codesourcery.com>
5080 * breakpoint.c (tracepoint_save_command): Include variables,
5081 conditionals, tracepoint types, and default-collect.
5082 * tracepoint.c (save_trace_state_variables): New function.
5083 * tracepoint.h (save_trace_state_variables): Declare it.
5085 2010-03-31 Pierre Muller <muller@ics.u-strasbg.fr>
5087 * remote.c (end_thread): ARI fix: Use xstrdup instead of strdup.
5089 2010-03-30 Keith Seitz <keiths@redhat.com>
5091 * c-typeprint.c (c_type_print_args): Don't print "void"
5092 for java, regardless of whether it is TYPE_PROTOTYPED.
5093 Use the passed-in language instead of current_language.
5094 (c_type_print_varspec_suffix): Use current_language instead
5095 of assuming language_c.
5096 * jv-typeprint.c (java_type_print_base): (bz 9320) Strip off
5097 any return type specifier from the physname.
5099 2010-03-30 Pedro Alves <pedro@codesourcery.com>
5101 * tui/tui-interp.c (tui_is_toplevel): New.
5103 (tui_allowed_p): New.
5104 * tui/tui.c (tui_enable): Check if the TUI is allowed before
5106 * tui/tui.h (tui_allowed_p): Declare.
5108 2010-03-30 Ozkan Sezer <sezeroz@gmail.com>
5110 * serial.h: Include winsock2.h before windows.h.
5112 2010-03-30 H.J. Lu <hongjiu.lu@intel.com>
5114 * NEWS: Mention xmlRegisters= in qSupported packet.
5116 * i386-tdep.c: Include "remote.h".
5117 (_initialize_i386_tdep): Call register_remote_support_xml.
5119 * remote.c (remote_support_xml): New.
5120 (register_remote_support_xml): Likewise.
5121 (remote_query_supported_append): Likewise.
5122 (remote_query_supported): Support remote_support_xml.
5124 * remote.h (register_remote_support_xml): New.
5126 2010-03-29 Stan Shebs <stan@codesourcery.com>
5128 * tracepoint.c (trace_find_line_command): Remove dead code.
5130 * tracepoint.h (struct uploaded_string): New struct.
5131 (struct uploaded_tp): New fields for source strings.
5132 * breakpoint.c (this_utp, next_cmd): New globals.
5133 (read_uploaded_action): New function.
5134 (create_tracepoint_from_upload): Fill in more parts
5136 * tracepoint.c (encode_source_string): New function.
5137 (trace_save): Write out source strings, fix error checks.
5138 (parse_tracepoint_definition): Add source string parsing.
5139 * remote.c (PACKET_TracepointSource): New packet type.
5140 (remote_download_command_source): New function.
5141 (remote_download_tracepoint): Download source pieces also.
5142 (_initialize_remote): Add packet config command.
5144 * tracepoint.c (collect_symbol): Send LOC_UNRESOLVED symbols to
5147 * tracepoint.c (start_tracing): Check tracepoints before sending
5148 commands to target, don't start if all tracepoints disabled.
5150 2010-03-28 Pedro Alves <pedro@codesourcery.com>
5152 * cli/cli-script.c (process_next_line): Handle 'stepping'.
5154 2010-03-26 Stan Shebs <stan@codesourcery.com>
5156 * tracepoint.c (disconnect_or_stop_tracing): Get out of tfind mode.
5158 2010-03-26 Tom Tromey <tromey@redhat.com>
5160 * breakpoint.c (commands_command_1): Duplicate 'arg'.
5162 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5164 * breakpoint.c (expand_line_sal_maybe): Always call skip_prologue_sal.
5165 (skip_prologue_sal): Remove local definition.
5166 (resolve_sal_pc): Remove now unnecessary code.
5167 * linespec.c (minsym_found): Call skip_prologue_sal.
5168 * symtab.c (find_function_start_pc): Remove.
5169 (find_function_start_sal): Extract prologue skipping into ...
5170 (skip_prologue_sal): ... this new function. Handle code both
5171 with and without debug info. Respect SAL's explicit_pc and
5172 explicit_line flags. Inline old find_function_start_pc.
5173 * symtab.h (find_function_start_pc): Remove.
5174 (skip_prologue_sal): Add prototype.
5176 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5178 * dwarf2read.c (read_func_scope): Also scan specification DIEs
5179 for DW_TAG_imported_module children.
5181 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5183 * dwarf2read.c (dwarf2_name): Work around GCC bugzilla debug/41828 by
5184 ignoring spurious DW_AT_name attributes for unnamed structs or unions.
5185 * completer.c (add_struct_fields): Fix inverted logic.
5187 2010-03-26 Ulrich Weigand <uweigand@de.ibm.com>
5189 * breakpoint.c (bpstat_clear_actions): Reset bs->commands_left.
5191 2010-03-26 Pedro Alves <pedro@codesourcery.com>
5193 * tracepoint.c (current_trace_status): Don't make sure error_desc
5195 (parse_trace_status): Release a previous error_desc string, and
5196 set it to NULL by default. If stop reason is tracepoint_error,
5197 make sure error_desc is not left NULL.
5199 2010-03-26 Pedro Alves <pedro@codesourcery.com>
5201 * tracepoint.c (trace_save): Remove X from tracepoint error
5204 2010-03-26 Pedro Alves <pedro@codesourcery.com>
5206 * tracepoint.c (parse_trace_status): Don't allow plain strings in
5207 the terror description. Don't expect an X prefix.
5209 2010-03-25 Stan Shebs <stan@codesourcery.com>
5211 * tracepoint.h (trace_stop_reason): Add tracepoint_error.
5212 (struct trace_status): New field error_desc.
5213 * tracepoint.c (stop_reason_names): Add terror.
5214 (current_trace_status): Ensure non-NULL error description.
5215 (trace_status_command): Add error report.
5216 (trace_status_mi): Ditto.
5217 (trace_save): Add special case for error description.
5218 (parse_trace_status): Add case for errors.
5220 2010-03-25 Keith Seitz <keiths@redhat.com>
5222 * dwarf2read.c (read_subroutine_type): If the compilation unit
5223 language is Java, mark any formal parameter named "this" as
5224 artificial (GCC/43521).
5225 (dwarf2_name): Add special handling for Java constructors.
5227 2010-03-25 Tom Tromey <tromey@redhat.com>
5229 PR gdb/11327, PR gdb/11328, PR breakpoints/11368:
5230 * infrun.c (handle_inferior_event): Change initialization of
5232 (handle_inferior_event): Change assignment to stop_stack_dummy.
5233 (normal_stop): Update use of stop_stack_dummy.
5234 (struct inferior_status) <stop_stack_dummy>: Change type.
5235 * inferior.h (stop_stack_dummy): Update.
5236 * infcmd.c (stop_stack_dummy): Change type.
5237 * infcall.c (cleanup_delete_std_terminate_breakpoint): New
5239 (call_function_by_hand): Call set_std_terminate_breakpoint.
5240 Rewrite std::terminate handling.
5241 * breakpoint.h (enum bptype) <bp_std_terminate,
5242 bp_std_terminate_master>: New.
5243 (enum stop_stack_kind): New.
5244 (struct bpstat_what) <call_dummy>: Change type.
5245 (set_std_terminate_breakpoint, delete_std_terminate_breakpoint):
5247 * breakpoint.c (create_std_terminate_master_breakpoint): New
5249 (update_breakpoints_after_exec): Handle bp_std_terminate_master.
5250 Call create_std_terminate_master_breakpoint.
5251 (print_it_typical): Handle new breakpoint kinds.
5252 (bpstat_stop_status): Handle bp_std_terminate_master.
5253 (bpstat_what): Correctly set call_dummy field. Handle
5254 bp_std_terminate_master and bp_std_terminate.
5255 (print_one_breakpoint_location): Update.
5256 (allocate_bp_location): Update.
5257 (set_std_terminate_breakpoint): New function.
5258 (delete_std_terminate_breakpoint): Likewise.
5259 (create_thread_event_breakpoint): Update.
5260 (delete_command): Update.
5261 (breakpoint_re_set_one): Update.
5262 (breakpoint_re_set): Call create_std_terminate_master_breakpoint.
5264 2010-03-25 Jan Kratochvil <jan.kratochvil@redhat.com>
5266 * symfile.c (build_section_addr_info_from_bfd): New.
5267 (build_section_addr_info_from_objfile): Base it on
5268 build_section_addr_info_from_bfd.
5269 (addrs_section_compar, addrs_section_sort): New.
5270 (addr_info_make_relative): New variables my_cleanup, abfd_addrs,
5271 addrs_sorted, abfd_addrs_sorted and addrs_to_abfd_addrs. Build
5272 addrs_to_abfd_addrs. Use it for recalculating ADDRS.
5274 2010-03-24 Michael Snyder <msnyder@localhost.localdomain>
5276 * elfread.c (find_separate_debug_file_by_buildid):
5277 Remove unused local variable.
5279 2010-03-24 Tom Tromey <tromey@redhat.com>
5281 PR breakpoints/9352:
5282 * NEWS: Mention changes to `commands' and `rbreak'.
5283 * symtab.c (do_end_rbreak_breakpoints): New function.
5284 (rbreak_command): Call start_rbreak_breakpoints; arrange to call
5285 end_rbreak_breakpoints.
5286 * breakpoint.c (breakpoint_count, tracepoint_count): Now static.
5287 (set_breakpoint_count): Likewise. Clear last_was_multi.
5288 (multi_start, multi_end, last_was_multi): New globals.
5289 (start_rbreak_breakpoints, end_rbreak_breakpoints): New
5291 (struct commands_info): New
5292 (do_map_commands_command): New function.
5293 (commands_command_1): New function.
5294 (commands_command): Use it.
5295 (commands_from_control_command): Likewise.
5296 (do_delete_breakpoint): New function.
5297 (delete_command): Use it.
5298 (map_breakpoint_numbers): Add 'data' argument. Pass to callback.
5299 (do_map_disable_breakpoint): New function.
5300 (disable_command): Use it.
5301 (do_map_enable_breakpoint): New function.
5302 (enable_command): Use it.
5303 (enable_once_breakpoint): Add argument.
5304 (enable_once_command): Update.
5305 (enable_delete_breakpoint): Add argument.
5306 (enable_delete_command): Update.
5307 (break_command_really): Set last_was_multi when needed.
5308 (check_tracepoint_command): Fix formatting.
5309 (validate_commands_for_breakpoint): New function.
5310 (breakpoint_set_commands): Use it.
5311 (tracepoint_save_command): Update.
5312 * breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints):
5315 2010-03-24 Tom Tromey <tromey@redhat.com>
5317 * breakpoint.h (struct counted_command_line): New struct.
5318 (struct breakpoint) <commands>: Change type.
5319 (struct bpstats) <commands>: Change type.
5320 <commands_left>: New field.
5321 * breakpoint.c (alloc_counted_command_line): New function.
5322 (incref_counted_command_line): Likewise.
5323 (decref_counted_command_line): Likewise.
5324 (do_cleanup_counted_command_line): Likewise.
5325 (make_cleanup_decref_counted_command_line): Likewise.
5326 (breakpoint_set_commands): Use decref_counted_command_line and
5327 alloc_counted_command_line.
5328 (commands_command): Don't error if breakpoint commands are
5330 (commands_from_control_command): Likewise.
5331 (bpstat_free): Update.
5332 (bpstat_copy): Likewise.
5333 (bpstat_clear_actions): Likewise.
5334 (bpstat_do_actions_1): Likewise.
5335 (bpstat_stop_status): Likewise.
5336 (print_one_breakpoint_location): Likewise.
5337 (delete_breakpoint): Likewise.
5338 (bpstat_alloc): Initialize new field.
5339 (tracepoint_save_command): Update.
5340 * tracepoint.c (encode_actions): Update.
5341 (trace_dump_command): Update.
5343 2010-03-24 Daniel Jacobowitz <dan@codesourcery.com>
5345 * dwarf2-frame.c (dwarf2_frame_find_quirks): Use producer_is_realview.
5346 * dwarf2read.c (load_full_comp_unit): Read DW_AT_producer.
5347 (read_structure_type): For RealView, set TYPE_STUB on structures with
5348 no byte size and no children.
5349 (read_subroutine_type): Mark functions as prototyped by default.
5350 * symtab.c (producer_is_realview): New function.
5351 * symtab.h (expand_line_sal): Fix declaration formatting.
5352 (producer_is_realview): Declare.
5354 2010-03-24 Daniel Jacobowitz <dan@codesourcery.com>
5356 * arm-tdep.c (skip_prologue_function): New function.
5357 (submask, bit, bits, sbits, BranchDest): Move higher in the file.
5358 (thumb_analyze_prologue): Document return value. Recognize more
5359 Thumb instructions, skippable calls, and some Thumb-2 instructions.
5361 (arm_skip_prologue): Remove call dummy check. Check the prologue
5362 for non-GNU compilers.
5363 (arm_instruction_changes_pc): New function.
5364 (arm_analyze_prologue): New function, broken out from
5365 arm_scan_prologue. Recognize more ARM instructions and skippable
5366 calls. Update comments. Handle NULL cache. Return the address
5367 of the first unrecognized instruction. Do not skip past other
5368 instructions which change control flow. Add debug output.
5369 (arm_scan_prologue): Use arm_analyze_prologue.
5370 (ARM_PC_32): Delete.
5371 (shifted_reg_val): Simplify ARM_PC_32 check.
5373 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5375 * tracepoint.c (tvariables_info_1): Actually compute
5376 the number of rows in the result.
5378 2010-03-24 Pedro Alves <pedro@codesourcery.com>
5380 * remote.c (crc32): Constify `buf' parameter.
5381 (remote_verify_memory): New, abstracted out from...
5382 (compare_sections_command): ... this. Remove hardcoded target
5384 (init_remote_ops): Install remote_verify_memory.
5385 * target.c (target_verify_memory): New.
5386 * target.h (struct target_ops) <to_verify_memory>: New field.
5387 (target_verify_memory): Declare.
5389 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5391 Implement -trace-save.
5393 * mi-cmds.h (mi_cmds_trace_save): Declare.
5394 * mi-cmds.c (mi_cmds): Register -trace-save.
5395 * mi/mi-main.c (mi_cmd_trace_save): New.
5396 * remote.c (remote_save_trace_data): Take const parameter.
5397 * target.h (struct target_ops::to_save_trace_data): Take
5399 * target.c (update_current_target): Adjust to the above.
5400 * tracepoint.c (trave_save): New, extracted from
5401 (trace_save_command): ...this.
5402 (tfile_trace_find): Remove message that is unnecessary now
5403 that 'tfind' reports found frame.
5404 * tracepoint.h (trace_save): Declare.
5406 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5408 Implement -trace-find.
5410 * mi/mi-cmds.c (mi_cmds): Register -trace-find.
5411 * mi/mi-cmds.h (mi_cmd_trace_find): Declare.
5412 * mi/mi-main.c (mi_cmd_trace_find): New.
5413 * target.h (struct target_ops): Document to_trace_find.
5414 * tracepoint.h (tfind_1): Declare.
5415 * tracepoint.c (finish_tfind_command): Rename to...
5417 * remote.c (remote_trace_find): Return -1 if target say
5418 there's no frame. Improve error diagnostics.
5420 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5422 -trace-define-variable and -trace-list-variables.
5424 * tracepoint.c (create_trace_state_variable): Make
5425 private copy of name, as opposed to assuming the
5426 pointer lives forever.
5427 (tvariables_info_1): New.
5428 (tvariables_info): Use the above.
5429 * tracepoint.h (create_trace_state_variable, tvariables_info_1):
5431 * mi/mi-cmds.c (mi_cmds): Register -trace-define-variable
5432 and -trace-list-variables.
5433 * mi/mi-cmds.h (mi_cmd_trace_define_variable)
5434 (mi_cmd_trace_list_variables): New.
5435 * mi/mi-main.c (mi_cmd_trace_define_variable)
5436 (mi_cmd_trace_list_variables): New.
5438 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5440 Implement -break-passcount.
5442 * mi/mi-cmd-break.c (mi_cmd_break_passcount): New.
5443 * mi/mi-cmds.c (mi_cmds): Register -break-passcount.
5444 * mi/mi-cmds.h (mi_cmd_break_passcount): Declare.
5446 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5448 -trace-start/-trace-end/-trace-status.
5450 * mi/mi-cmds.c (mi_cmds): Register -trace-start, -trace-status
5452 * mi/mi-cmds.h (mi_cmd_trace_start, mi_cmd_trace_status)
5453 (mi_cmd_trace_stop): Declare.
5454 * mi/mi-main.c (mi_cmd_trace_start, mi_cmd_trace_status)
5455 (mi_cmd_trace_stop): New.
5456 * tracepoint.c (start_tracing): New, extracted from...
5457 (trace_start_command): ...this.
5458 (trace_status_mi): New.
5459 * tracepoint.h (struct trace_status): Document
5460 stopping_tracepoint.
5461 (start_tracing, stop_tracing, trace_status_mi): Declare.
5463 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5465 Implement creating tracepoints with -break-insert.
5467 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle -a
5468 to mean that tracepoint should be created.
5470 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5472 * breakpoint.c (check_no_tracepoint_commands): Use
5473 current spelling of 'teval'.
5475 2010-03-24 Vladimir Prus <vladimir@codesourcery.com>
5477 Unify actions and commands
5479 * defs.h (read_command_lines, read_command_lines_1): New
5480 parameters validator and closure.
5481 * tracepoint.h (struct action_line): Remove.
5482 * breakpoint.h (struct breakpoint): Remove the 'actions'
5484 * defs.h (enum command_control_type): New value
5485 while_stepping_control.
5486 (struct command_line): Add comments.
5487 * breakpoint.c (breakoint_is_tracepoint): New.
5488 (breakpoint_set_commands): For tracepoints,
5489 verify the commands are permissible.
5490 (check_tracepoint_commands): New.
5491 (commands_command): Require that each new line is validated using
5492 check_tracepoint_command, if we set commands for a tracepoint.
5493 (create_tracepoint_from_upload): Likewise.
5494 (print_one_breakpoint_location): Remove the code to print
5495 actions specifically.
5496 (tracepoint_save_command): Relay to print_command_lines.
5497 * cli/cli-script.c (process_next_line): New parameters validator
5498 and closure. Handle 'while-stepping'. Call validator if not null.
5499 (read_command_lines, read_command_lines1): Likewise.
5500 (recurse_read_control_structure): New parameters validator and
5501 closure. Handle while_stepping_control.
5502 (print_command_lines): Handle while-stepping.
5503 (get_command_line, define_command, document_command): Adjust.
5504 * remote.c (remote_download_tracepoint): Adjust.
5505 * tracepoint.c (make_cleanup_free_actions, read_actions)
5506 (free_actions, do_free_actions_cleanup): Remove.
5507 (trace_actions_command): Use read_command_lines.
5508 (validate_actionline): Use error in one place.
5509 (encode_actions_1): New, extracted from...
5510 (encode_actions): ...this. Also use cleanups for exception
5512 (trace_dump_command): Adjust.
5513 * mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
5516 2010-03-23 Mike Frysinger <vapier@gentoo.org>
5518 * Makefile.in (OPCODES_CFLAGS): Add -I$(OPCODES_SRC)/..
5520 2010-03-22 Stan Shebs <stan@codesourcery.com>
5522 * value.c (value_static_field): Be lazy about the field's value.
5524 2010-03-22 Reid Kleckner <reid@kleckner.net>
5527 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Add
5529 (disable_breakpoints_in_shlibs): Likewise.
5531 2010-03-22 Ulrich Weigand <uweigand@de.ibm.com>
5533 * dwarf2read.c (partial_die_parent_scope): Work around buggy
5534 GCC 4.1 debug info generation (GCC PR c++/28460).
5535 (determine_prefix): Likewise.
5537 2010-03-20 Daniel Jacobowitz <dan@codesourcery.com>
5539 * tui/tui-disasm.c (tui_get_begin_asm_address): Default to
5541 * tui/tui-layout.c (extract_display_start_addr): Likewise.
5543 2010-03-19 Stan Shebs <stan@codesourcery.com>
5545 * ax-gdb.c (gen_fetch): Handle bool.
5546 (gen_usual_unary): Ditto.
5548 (gen_equal): New function.
5549 (gen_less): New function.
5550 (gen_expr_binop_rest): Call them, also return integer type from
5554 2010-03-19 Tom Tromey <tromey@redhat.com>
5556 * jv-lang.c (jv_dynamics_objfile_data_key)
5557 (jv_type_objfile_data_key): New globals.
5558 (class_symtab): Move earlier.
5559 (jv_per_objfile_free): New function.
5560 (get_dynamics_objfile): Call set_objfile_data. Add 'gdbarch'
5562 Remove ancient #if 1.
5563 (add_class_symbol): Remove redundant declaration.
5564 (java_lookup_class): Use alloc_type, not alloc_type_arch.
5565 (java_link_class_type): Mark as static. Update.
5566 (jv_clear_object_type): New function.
5567 (set_java_object_type): Likewise.
5568 (get_java_object_type): Use set_java_object_type.
5569 (is_object_type): Likewise.
5570 (_initialize_java_language): Register new objfile keys.
5571 (get_java_class_symtab): Add 'gdbarch' parameter.
5572 (add_class_symtab_symbol): Update.
5573 (type_from_class): Update.
5575 2010-03-19 Stan Shebs <stan@codesourcery.com>
5577 * ax-general.c (ax_const_l): Fix a sizing bug.
5579 2010-03-18 Joel Brobecker <brobecker@adacore.com>
5583 2010-03-18 Stan Shebs <stan@codesourcery.com>
5584 Pedro Alves <pedro@codesourcery.com>
5586 * target.h (struct target_ops): New method
5587 to_set_circular_trace_buffer.
5588 (target_set_circular_trace_buffer): New macro.
5589 * target.c (update_current_target): Add
5590 to_set_circular_trace_buffer, fix to_set_disconnected_tracing
5592 * remote.c (remote_set_circular_trace_buffer): New function.
5593 (init_remote_ops): Add it to vector.
5594 * tracepoint.h (struct trace_status): New field traceframes_created,
5595 change buffer_size and buffer_free to int.
5596 * tracepoint.c (circular_trace_buffer): New global.
5597 (start_tracing): Send values of disconnected tracing and circular
5598 trace buffer settings.
5599 (set_circular_trace_buffer): New function.
5600 (parse_trace_state): Handle total space and frames created.
5601 (trace_status_command): Display total space and total frames
5603 (trace_save): Write out new status values.
5604 (parse_trace_status): Set traceframe_count, traceframes_created,
5605 buffer_free and buffer_size to -1 by default.
5606 (_initialize_tracepoint): New setshow for circular-trace-buffer.
5607 * NEWS: Mention the circular trace buffer option.
5609 2010-03-18 Tom Tromey <tromey@redhat.com>
5611 * infcmd.c (finish_command_continuation): Wrap print_return_value
5614 2010-03-18 Joel Brobecker <brobecker@adacore.com>
5616 * dwarf2read.c (add_partial_subprogram): Make sure the subprogram
5617 DIE has a name before creating the associated partial symbol.
5618 (read_func_scope): Emit a complaint if the subprogram does not
5619 have a name or when we can't extract the subprogram PC bounds.
5621 2010-03-18 Ulrich Weigand <uweigand@de.ibm.com>
5623 * mi/mi-main.c (mi_cmd_list_thread_groups): Use get_current_arch
5624 instead of selected frame architecture.
5626 2010-03-18 Pedro Alves <pedro@codesourcery.com>
5628 * infcmd.c (until_command): Use ERROR_NO_INFERIOR. Ensure there's
5629 a valid selected thread, and that it is not running.
5630 (advance_command): Ditto.
5631 (finish_command): Ditto.
5633 2010-03-17 Stan Shebs <stan@codesourcery.com>
5635 * ax-gdb.c (require_rvalue): Disallow non-scalars.
5637 * infcall.c: Include tracepoint.h.
5638 (call_function_by_hand): Disallow calls in tfind mode.
5639 * infcmd.c: Include tracepoint.h.
5640 (ensure_not_tfind_mode): New function.
5641 (continue_1): Call it.
5643 (jump_command): Ditto.
5644 (signal_command): Ditto.
5645 (advance_command): Ditto.
5646 (until_command): Ditto.
5647 (finish_command): Ditto.
5648 * tracepoint.h (disconnect_or_stop_tracing): Declare.
5650 * ax-gdb.h (struct axs_value): New field optimized_out.
5651 (gen_trace_for_var): Add gdbarch argument.
5652 * ax-gdb.c (gen_trace_static_fields): New function.
5653 (gen_traced_pop): Call it, add gdbarch argument.
5654 (gen_trace_for_expr): Update call to it.
5655 (gen_trace_for_var): Ditto, and report optimized-out variables.
5656 (gen_struct_ref_recursive): Check for optimized-out value.
5657 (gen_struct_elt_for_reference): Ditto.
5658 (gen_static_field): Pass gdbarch instead of expression, assume
5659 optimization if field not found.
5660 (gen_var_ref): Set the optimized_out flag.
5661 (gen_expr): Error on optimized-out variable.
5662 * tracepoint.c (collect_symbol): Handle struct-valued vars as
5663 expressions, skip optimized-out variables with computed locations.
5664 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of
5665 erroring out if location expression missing.
5666 (loclist_tracepoint_var_ref): Don't error out here.
5668 2010-03-17 Tom Tromey <tromey@redhat.com>
5670 * dwarf2read.c (dwarf2_get_section_info): Handle case where no
5671 DWARF data is available.
5673 2010-03-17 Daniel Jacobowitz <dan@codesourcery.com>
5675 * symfile.c (generic_load): Reset breakpoints after loading.
5677 2010-03-17 Tom Tromey <tromey@redhat.com>
5679 * linux-nat.c (linux_nat_detach): Check debug_linux_nat.
5681 2010-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
5683 * spu-tdep.c (spu_catch_start): Replace set_breakpoint call with the
5684 create_breakpoint call, adjust the parameters.
5686 2010-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
5687 Chandru <chandru@in.ibm.com>
5689 * dwarf2read.c (read_subrange_type): Set TYPE_HIGH_BOUND_UNDEFINED.
5690 * valarith.c (value_subscripted_rvalue): Suppress error if
5691 TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED.
5693 2010-03-16 Holger Hans Peter Freyther <zecke@selfish.org>
5695 * linux-record.c (record_linux_msghdr): Remove unintended semicolons.
5697 2010-03-16 Joel Brobecker <brobecker@adacore.com>
5699 * ada-tasks.c (task_command_1): Check that the task ptid is valid
5700 before doing the associated thread switch.
5702 2010-03-16 Daniel Jacobowitz <dan@codesourcery.com>
5704 * MAINTAINERS: Update my email address.
5706 2010-03-16 Vladimir Prus <vladimir@codesourcery.com>
5708 Simplify MI breakpoint setting.
5710 * breakpoint.c (break_command_really): Make nonstatic and
5712 (create_breakpoint): ...this. Rename prior function by this name
5714 (create_breakpoint_sal): ...this.
5715 (create_breakpoints): Rename to...
5716 (create_breakpoints_sal): ...this.
5717 (set_breakpoint): Remove.
5718 * breakpoint.h: Adjust to above changes.
5719 * mi/mi-cmd-break.c (mi_cmd_break_insert): Simplify.
5721 2010-03-15 Stan Shebs <stan@codesourcery.com>
5723 * ax-gdb.c: Include cp-support.h.
5724 (find_field): Remove.
5725 (gen_primitive_field): New function.
5726 (gen_struct_ref_recursive): New function.
5727 (gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead
5729 (gen_static_field): New function.
5730 (gen_struct_elt_for_reference): New.
5731 (gen_namespace_elt): New.
5732 (gen_maybe_namespace_elt): New.
5733 (gen_aggregate_elt_ref): New.
5734 (gen_expr): Add OP_SCOPE, display opcode name in error message.
5736 2010-03-15 Tom Tromey <tromey@redhat.com>
5738 * dwarf2read.c (die_needs_namespace): Also return 0 for
5741 2010-03-15 Sami Wagiaalla <swagiaal@redhat.com>
5744 * cp-support.h: Added char *declaration element to using_direct
5746 (cp_add_using): Added char *declaration argument.
5747 (cp_add_using_directive): Ditto.
5748 (cp_lookup_symbol_imports): made extern.
5749 * cp-namespace.c: Updated with the above changes.
5750 * dwarf2read.c (read_import_statement): Ditto.
5751 (read_namespace): Ditto.
5752 (read_import_statement): Support import declarations.
5753 * cp-namespace.c (cp_lookup_symbol_imports): Check for imported
5755 Added support for 'declaration_only' search.
5756 (cp_lookup_symbol_namespace): Attempt to search for the name as
5757 is before consideration of imports.
5758 * symtab.c (lookup_symbol_aux_local): Added a 'declaration_only'
5759 search at every block level search.
5760 Now takes language argument.
5761 (lookup_symbol_aux): Updated.
5763 2010-03-15 Tom Tromey <tromey@redhat.com>
5765 * c-exp.y (name_not_typename): Add 'operator' clause.
5767 2010-03-15 Ralf Corsepius <ralf.corsepius@rtems.org> (tiny change)
5769 * configure.ac: Exit if ${gdb_target_obs}" is not set.
5770 * configure: Regenerate.
5772 2010-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
5774 * symfile.c (addr_info_make_relative): Ignore also missing ".dynbss"
5775 and ".sdynbss". Update the comment.
5777 2010-03-15 Jie Zhang <jie@codesourcery.com>
5779 * MAINTAINERS: Update my email address.
5781 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com>
5783 * gdbtypes.h (TYPE_IS_OPAQUE): Correct HAVE_CPLUS_STRUCT check.
5785 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com>
5787 * charset.c [USE_WIN32API]: Include <windows.h>.
5788 (_initialize_charset): Correct type of w32_host_default_charset.
5790 2010-03-14 Pedro Alves <pedro@codesourcery.com>
5792 * infrun.c (ptid_match): Don't assert that PTID is not a pid ptid.
5794 2010-03-12 Tom Tromey <tromey@redhat.com>
5797 * dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: A variable
5798 in a lexical block does not need a namespace.
5799 (new_symbol) <DW_TAG_variable>: Put extern variables on
5800 list_in_scope in all cases.
5802 2010-03-12 Stan Shebs <stan@codesourcery.com>
5804 * ax-gdb.c (gen_expr): Add shift expressions.
5805 (gen_expr_binop_rest): Ditto.
5807 2010-03-12 Sami Wagiaalla <swagiaal@redhat.com>
5809 * buildsym.c (finish_block): Reset using_directives pointer
5810 after block initialization.
5812 2010-03-12 H.J. Lu <hongjiu.lu@intel.com>
5814 * amd64-tdep.c (amd64_word_names): Replace "sp" with "".
5815 * i386-tdep.c (i386_word_names): Likewise.
5817 2010-03-12 Pedro Alves <pedro@codesourcery.com>
5819 * target.c (memory_xfer_partial): Don't use the stack cache if
5820 inspecting trace frames.
5821 * tracepoint.c (finish_tfind_command): Invalidate the target
5824 2010-03-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5826 * solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered
5827 for the PIC displacement, print also the displacement value.
5828 (svr4_exec_displacement): Print DISPLACEMENT if INFO_VERBOSE.
5830 2010-03-10 Kevin Buettner <kevinb@redhat.com>
5832 * remote-mips.c (close_ports, mips_initialize_cleanups)
5833 (mips_exit_cleanups, mips_send_command, mips_open, pmon_open)
5834 (ddb_open, lsi_open, mips_remove_breakpoint, mips_remove_watchpoint)
5835 (mips_stopped_by_watchpoint, send_srec, pmon_checkset)
5836 (pmon_make_fastrec, pmon_check_ack, mips_expect_download)
5837 (pmon_check_entry_address, pmon_check_total, pmon_end_download)
5838 (pmon_download, pmon_load_fast, _initialize_remote_mips): Add
5839 comments describing each of these functions.
5840 (mips_enter_debug, mips_exit_debug, common_open)
5841 (mips_signal_from_protocol, pmon_makeb64, pmon_zeroset): Add
5842 blank line after the comment describing the function.
5844 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5846 * solib-svr4.c (svr4_exec_displacement): Return now success, new
5847 parameter displacementp. Update comment.
5848 (svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS
5849 element exists. Return if svr4_exec_displacement was not successful.
5852 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5853 Daniel Jacobowitz <dan@codesourcery.com>
5855 * solib-svr4.c (read_program_header): Support type == -1 to read
5856 all program headers.
5857 (read_program_headers_from_bfd): New function.
5858 (svr4_static_exec_displacement): Remove and move the comment ...
5859 (svr4_exec_displacement): ... here. Remove variable found. New
5860 variable displacement. Check also DYNAMIC. Verify DISPLACEMENT
5861 alignment for ELF targets. Compare target vs. exec_bfd PHDRs for ELF
5862 targets using read_program_headers_from_bfd. Remove the call of
5863 svr4_static_exec_displacement.
5865 2010-03-10 Tom Tromey <tromey@redhat.com>
5867 * dwarf2read.c (struct pubnames_header): Remove.
5868 (_PUBNAMES_HEADER): Remove.
5869 (_ACTUAL_PUBNAMES_HEADER_SIZE): Remove.
5870 (struct aranges_header): Remove.
5871 (_ARANGES_HEADER, _ACTUAL_ARANGES_HEADER_SIZE): Remove.
5872 (struct dwarf2_per_objfile) <pubnames, aranges>: Remove.
5873 (PUBNAMES_SECTION): Remove.
5874 (ARANGES_SECTION): Remove.
5875 (dwarf2_locate_sections): Don't handle pubnames or aranges.
5876 (dwarf2_build_psymtabs): Remove dead code.
5877 (dwarf2_build_psymtabs_easy): Remove.
5879 2010-03-10 Tom Tromey <tromey@redhat.com>
5881 * elfread.c (elf_symfile_read): Don't call
5882 dwarf2_build_frame_info.
5883 * dwarf2read.c (struct dwarf2_section_info) <readin>: New field.
5884 (struct dwarf2_per_objfile) <objfile>: New field.
5885 (dwarf2_has_info): Now idempotent. Set objfile field.
5886 (dwarf2_read_section): Check and set readin field. Call
5888 (dwarf2_build_psymtabs): Don't read all sections.
5889 (read_type_comp_unit_head): Read types section.
5890 (create_debug_types_hash_table): Likewise.
5891 (init_cu_die_reader): Add asserts.
5892 (process_type_comp_unit): Add assert.
5893 (dwarf2_build_psymtabs_hard): Read info section.
5894 (load_partial_comp_unit): Add assert.
5895 (create_all_comp_units): Read info section.
5896 (load_full_comp_unit): Likewise.
5897 (dwarf2_ranges_read): Read ranges section.
5898 (dwarf2_record_block_ranges): Add assert.
5899 (dwarf2_read_abbrevs): Read abbrev section.
5900 (read_indirect_string): Read str section.
5901 (dwarf_decode_line_header): Read line section.
5902 (read_signatured_type_at_offset): Read types section.
5903 (dwarf_decode_macros): Read macinfo section.
5904 (dwarf2_symbol_mark_computed): Read loc section.
5905 * dwarf2-frame.c (dwarf2_frame_find_fde): Call
5906 dwarf2_build_frame_info.
5907 (dwarf2_build_frame_info): Unconditionally set
5908 dwarf2_frame_objfile_data on the objfile.
5909 * configure.ac: Check for posix_madvise.
5910 * config.in, configure: Rebuild.
5912 2010-03-10 Tom Tromey <tromey@redhat.com>
5914 * xcoffread.c (xcoff_start_psymtab): Update.
5915 (xcoff_end_psymtab): Update.
5916 * psymtab.c (allocate_psymtab): Remove dead code.
5917 * psympriv.h (struct partial_symtab) <read_symtab_private>: Now
5919 * mdebugread.c (parse_partial_symbols): Update.
5920 (new_psymtab): Likewise.
5921 * dwarf2read.c (process_psymtab_comp_unit): Update.
5922 (psymtab_to_symtab_1): Update.
5923 * dbxread.c (start_psymtab): Update.
5924 (end_psymtab): Likewise.
5926 2010-03-10 Tom Tromey <tromey@redhat.com>
5928 * xcoffread.c: Include psymtab.h.
5929 (xcoff_sym_fns): Update.
5930 * symtab.h (struct partial_symbol): Remove.
5931 (PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.
5932 (struct partial_symtab): Remove.
5933 (PSYMTAB_TO_SYMTAB): Remove.
5934 (lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab)
5935 (find_pc_sect_psymtab): Remove.
5936 (find_pc_sect_symtab_via_partial): Declare.
5937 (find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab)
5938 (find_main_psymtab): Remove.
5939 (find_main_filename): Declare.
5940 (fixup_psymbol_section): Remove.
5941 (fixup_section): Declare.
5942 * symtab.c: Include psymtab.h.
5943 (lookup_symtab): Use lookup_symtab method.
5944 (lookup_partial_symtab): Remove.
5945 (find_pc_sect_psymtab_closer): Remove.
5946 (find_pc_sect_psymtab): Remove.
5947 (find_pc_sect_symtab_via_partial): New function.
5948 (find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove.
5949 (fixup_section): No longer static.
5950 (fixup_psymbol_section): Remove.
5951 (lookup_symbol_aux): Use lookup_symbol_aux_quick.
5952 (lookup_global_symbol_from_objfile): Likewise.
5953 (lookup_symbol_aux_psymtabs): Remove.
5954 (lookup_symbol_aux_quick): New function.
5955 (lookup_symbol_global): Use lookup_symbol_aux_quick.
5956 (lookup_partial_symbol): Remove.
5957 (basic_lookup_transparent_type_quick): New function.
5958 (basic_lookup_transparent_type): Use it.
5959 (find_main_psymtab): Remove.
5960 (find_main_filename): New function.
5961 (find_pc_sect_symtab): Use find_pc_sect_symtab method.
5962 (find_line_symtab): Use expand_symtabs_with_filename method.
5963 (output_partial_symbol_filename): New function.
5964 (sources_info): Use map_partial_symbol_filenames.
5965 (struct search_symbols_data): New type.
5966 (search_symbols_file_matches): New function.
5967 (search_symbols_name_matches): Likewise.
5968 (search_symbols): Use expand_symtabs_matching method.
5969 (struct add_name_data): Rename from add_macro_name_data.
5970 (add_macro_name): Update.
5971 (add_partial_symbol_name): New function.
5972 (default_make_symbol_completion_list): Use
5973 map_partial_symbol_names.
5974 (struct add_partial_symbol_name): New type.
5975 (maybe_add_partial_symtab_filename): New function.
5976 (make_source_files_completion_list): Use
5977 map_partial_symbol_filenames.
5978 (expand_line_sal): Use expand_symtabs_with_filename method.
5979 * symmisc.c: Include psymtab.h.
5980 (print_objfile_statistics): Use print_stats method.
5981 (dump_objfile): Use dump method.
5982 (dump_psymtab, maintenance_print_psymbols)
5983 (maintenance_info_psymtabs, maintenance_check_symtabs)
5984 (extend_psymbol_list): Remove.
5985 * symfile.h (struct quick_symbol_functions): New struct.
5986 (struct sym_fns) <qf>: New field.
5987 (sort_pst_symbols): Remove.
5988 (increment_reading_symtab): Declare.
5989 * symfile.c: Include psymtab.h.
5990 (compare_psymbols, sort_pst_symbols): Remove.
5991 (psymtab_to_symtab): Remove.
5992 (increment_reading_symtab): New function.
5993 (symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs
5995 (set_initial_language): Use find_main_filename.
5996 (allocate_psymtab, discard_psymtab, cashier_psymtab): Remove.
5997 (free_named_symtabs): Remove unused code.
5998 (start_psymtab_common, add_psymbol_to_bcache)
5999 (append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list):
6001 * stack.c: Include psymtab.h, symfile.h.
6002 (backtrace_command_1): Use find_pc_sect_symtab_via_partial.
6003 * source.h (psymtab_to_fullname): Don't declare.
6004 * source.c: Include psymtab.h.
6005 (select_source_symtab): Use find_last_source_symtab method.
6006 (forget_cached_source_info): Use forget_cached_source_info
6008 (find_and_open_source): No longer static.
6009 (psymtab_to_fullname): Remove.
6010 * somread.c: Include psymtab.h.
6011 (som_sym_fns): Update.
6012 * psympriv.h: New file.
6013 * psymtab.h: New file.
6014 * psymtab.c: New file.
6015 * objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove.
6016 (ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise.
6017 * objfiles.c: Include psymtab.h.
6018 (objfile_relocate1): Use relocate method.
6019 (objfile_has_partial_symbols): Use has_symbols method.
6020 * mipsread.c: Include psymtab.h.
6021 (ecoff_sym_fns): Update.
6022 * mi/mi-cmd-file.c: Include psymtab.h.
6023 (print_partial_file_name): New function.
6024 (mi_cmd_file_list_exec_source_files): Use
6025 map_partial_symbol_filenames.
6026 * mdebugread.c: Include psympriv.h.
6027 * machoread.c: Include psympriv.h.
6028 (macho_sym_fns): Update.
6029 * m2-exp.y (yylex): Use lookup_symtab.
6030 * elfread.c: Include psympriv.h.
6031 (elf_sym_fns): Update.
6032 * dwarf2read.c: Include psympriv.h.
6033 * dbxread.c: Include psympriv.h.
6034 (aout_sym_fns): Update.
6035 * cp-support.c: Include psymtab.h.
6036 (read_in_psymtabs): Remove.
6037 (make_symbol_overload_list_qualified): Use
6038 expand_symtabs_for_function method.
6039 * coffread.c: Include psympriv.h.
6040 (coff_sym_fns): Update.
6041 * blockframe.c: Include psymtab.h.
6042 (find_pc_partial_function): Use find_pc_sect_symtab method.
6043 * ada-lang.h (ada_update_initial_language): Update.
6044 * ada-lang.c: Include psymtab.h.
6045 (ada_update_initial_language): Remove 'main_pst' argument.
6046 (ada_lookup_partial_symbol): Remove.
6047 (struct ada_psym_data): New type.
6048 (ada_add_psyms): New function.
6049 (ada_add_non_local_symbols): Use map_ada_symtabs method.
6050 (struct add_partial_datum): New type.
6051 (ada_add_partial_symbol_completions): New function.
6052 (ada_make_symbol_completion_list): Use map_partial_symbol_names.
6053 (ada_exception_support_info_sniffer): Update.
6054 * Makefile.in (SFILES): Add psymtab.c.
6055 (COMMON_OBS): Add psymtab.o.
6056 (HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h.
6058 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
6060 * remote-fileio.c (cygwin_conv_path): Define macro for old cygwin API.
6062 2010-03-10 Sami Wagiaalla <swagiaal@redhat.com>
6065 * cp-namespace.c (cp_add_using): Deleted.
6066 (cp_add_using_directive): Use obstack allocations.
6067 Merged the function cp_add_using into this one.
6068 Added 'struct obstack *' argument.
6069 (cp_scan_for_anonymous_namespaces): Updated.
6070 * cp-support.h: Updated.
6071 * dwarf2read.c (read_import_statement): Updated.
6072 (read_namespace): Updated.
6074 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
6076 * windows-nat.c (cygwin_conv_path): Remove old macro.
6078 2010-03-10 Pedro Alves <pedro@codesourcery.com>
6080 * breakpoint.c (condition_command): Handle watchpoint conditions.
6081 (is_hardware_watchpoint): Add comment.
6082 (is_watchpoint): New.
6083 (update_watchpoint): Don't reparse the watchpoint's condition
6086 (watchpoint_check): Use it.
6087 (bpstat_check_watchpoint): Handle it.
6088 (bpstat_check_breakpoint_conditions): Evaluate watchpoint local
6089 conditions in a frame where it makes sense.
6090 (watch_command_1): Store the innermost block of the condition
6092 (delete_breakpoint): Delete the watchpoint condition expression.
6093 * breakpoint.h (struct bp_location) <cond>: Update comment.
6094 (struct breakpoint): New field `cond_exp_valid_block'.
6096 2010-03-09 Joel Brobecker <brobecker@adacore.com>
6098 Adjust handling of Ada DIEs after dwarf2_physname patch.
6099 * dwarf2read.c (dwarf2_compute_name): Add handling of Ada DIEs.
6101 2010-03-09 Christopher Faylor <me+cygwin@cgf.cx>
6102 Pierre Muller <muller@ics.u-strasbg.fr>
6104 * windows-nat.c (cygwin_conv_path): Redefine to properly convert
6105 from/to posix/win32.
6106 (windows_make_so): Use non-Cygwin 1.7 specific function.
6107 (windows_create_inferior): Make sure that cygallargs points to
6108 original args in non Cygwin 1.7. case.
6110 2010-03-09 Michael Snyder <msnyder@vmware.com>
6112 * i386-tdep.c (i386_record_lea_modrm_addr): Use extract_signed_int
6113 after target_read_memory to get host byte order.
6114 (i386_process_record): Ditto.
6116 2010-03-09 Keith Seitz <keiths@redhat.com>
6118 Based on work from Daniel Jacobowitz <dan@codesourcery.com>
6119 * c-typeprint.c (cp_type_print_method_args): For non-static methods,
6120 print out const or volatile qualifiers, too.
6121 (c_type_print_args): Add parameters show_artificial and language.
6122 Skip artificial parameters when requested.
6123 Use the appropriate language printer.
6124 (c_type_print_varspec): Tell c_type_print_args to skip artificial
6125 parameters and pass language_c.
6126 * dwarf2read.c (die_list): New file global.
6127 (struct partial_die_info): Update comments for name field.
6128 (pdi_needs_namespace): Renamed to ...
6129 (die_needs_namespace): ... this. Rewrite.
6130 (dwarf2_linkage_name): Remove.
6131 (add_partial_symbol): Do not predicate the call to
6132 partial_die_full_name based on pdi_needs_namespace.
6133 Remove call to cp_check_possible_namespace_symbols and associated
6135 (guess_structure_name): Do not inspect child subprogram DIEs.
6136 (dwarf2_fullname): Update comments.
6137 Use die_needs_namespace to assist in computing the name.
6138 (read_func_scope): Use dwarf2_name to get the DIE's name.
6139 Use dwarf2_physname to get the "linkage name" of the DIE.
6140 (dwarf2_add_member_field): Use dwarf2_physname instead of
6141 dwarf2_linkage_name.
6142 (read_structure_type): For structs and classes, set TYPE_NAME, too.
6143 (determine_class): Remove.
6144 (read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
6146 (new_symbol): Unconditionally call dwarf2_name.
6147 Compute the "linkage name" using dwarf2_physname.
6148 Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
6149 When determining to scan for anonymous C++ namespaces, ignore
6151 (dwarf2_physname): New function.
6152 (dwarf2_full_name): Move content to new function and call
6154 (dwarf2_compute_name): "New" function.
6155 (_initialize_dwarf2_read): Initialize die_list.
6156 * gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
6158 (gnu_v3_print_method_ptr): Use the physname for virtual methods
6159 without a demangled name.
6160 Print out type information for non-virtual methods.
6161 * linespec.c (decode_line_1): Force ANY string using "::" (or
6162 "." for java) to use decode_compound, and clean up any stray quoting.
6163 If we found a file symtab, re-evaluate whether the remainder is_quoted.
6164 (decode_compound): Stop consuming at an open parenthesis.
6165 Keep template parameters.
6166 Keep any overload information.
6167 Keep keywords like "const".
6168 Remove paren_pointer.
6169 Move is_quoted check from set_flags to here.
6170 Remove #if 0 code from 2000. Ten years is long enough.
6171 (find_method): Before comparing symbol names, canonicalize the string
6173 If a specific overload is requested, find it. Otherwise throw an error.
6174 (find_method_overload_end): New function.
6175 (set_flags): Remove.
6176 (decode_compound): Assume that parentheses are matched.
6178 * symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
6180 * linespec.c (decode_line_1): Keep important keywords like
6181 "const" and "volatile".
6182 * symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
6183 * typeprint.h (c_type_print_args): Add declaration.
6184 * ui-file.c (do_ui_file_obsavestring): New function.
6185 (ui_file_obsavestring): New function.
6186 * ui-file.h (ui_file_obsavestring): Add declaration.
6187 * valops.c (find_overload_match): Resolve the object to
6189 If the object is a data member, search the object for the member
6190 and return with staticp set.
6191 Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
6192 Do not attempt to extract a function name from non-function types.
6193 If the extracted function name and the original name are the same,
6194 we don't have a C++ method.
6196 From Jan Kratochvil <jan.kratochvil@redhat.com>:
6197 * dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.
6199 * ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters
6200 and arguments from symbol lookups.
6201 * ax-gdb.c (gen_expr): Likewise.
6202 * cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope,
6203 cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type,
6204 lookup_possible_namespace_symbol): Likewise.
6205 * cp-support.c (read_in_psymtabs): Likewise.
6206 * cp-support.h (cp_lookup_symbol_nonlocal): Likewise.
6207 * language.h (la_lookup_symbol_nonlocal): Likewise.
6208 * scm-valprint.c (scm_inferior_print): Likewise.
6209 * solib-darwin.c (darwin_relocate_section_addresses): Likewise.
6210 * solib-svr.c (elf_lookup_lib): Likewise.
6211 * solib.c (show_auto_solib_add): Likewise.
6212 * solist.h (lookup_lib_global, solib_global_lookup): Likewise.
6213 * symmisc.c (maintenance_check_symtabs): Likewise.
6214 * symtab.c (lookup_symbol_in_language, lookup_symbol_aux,
6215 lookup_symbol_aux_local, lookup_symbol_aux_block,
6216 lookup_symbol_from_objfile, lookup_symbol_aux_symtabs,
6217 lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal,
6218 lookup_symbol_static, lookup_symbol_global, symbol_matches_domain,
6219 basic_lookup_transparent_type, find_main_psymtab,
6220 lookup_block_symbol): Likewise.
6221 * symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static,
6222 lookup_symbol_global, lookup_symbol_aux_block,
6223 lookup_symbol_partial_symbol, lookup_block_symbol,
6224 lookup_global_symbol, value_maybe_namespace_elt): Likewise.
6226 2010-03-09 Pierre Muller <muller@ics.u-strasbg.fr>
6228 * python/python-internal.h: Include symtab.h.
6230 2010-03-09 Joel Brobecker <brobecker@adacore.com>
6231 Pierre Muller <muller@ics.u-strasbg.fr>
6233 * p-lang.c (is_pascal_string_type): Remove unneeded parentheses.
6234 * p-valprint.c (pascal_val_print): Remove undeed block and fix
6237 2010-03-08 Tom Tromey <tromey@redhat.com>
6239 * breakpoint.c (breakpoint_1): Add "QUIT".
6241 2010-03-08 Daniel Jacobowitz <dan@codesourcery.com>
6242 Pedro Alves <pedro@codesourcery.com>
6244 * solib.c (solib_find): Replace extension if
6245 solib_symbols_extension is set in the target gdbarch.
6246 * arm-symbian-tdep.c (arm_symbian_init_abi): Set
6247 solib_symbols_extension to "sym".
6248 * gdbarch.sh (solib_symbols_extension): New variable.
6249 (pstring): New function.
6250 * gdbarch.h, gdbarch.c: Regenerate.
6252 2010-03-08 Tom Tromey <tromey@redhat.com>
6256 * utils.c: Include main.h.
6257 (fputs_maybe_filtered): Don't paginate if `batch_flag'.
6258 (defaulted_query): Use default answer if `batch_flag'.
6259 * main.h (batch_flag): Declare.
6260 * main.c (batch_flag): New global.
6261 (captured_main): Remove 'batch'. Update.
6263 2010-03-08 Kevin Buettner <kevinb@redhat.com>
6265 From Richard Sandiford, Martin M. Hunt, Corinna Vinschen,
6268 * remote-mips.c (rockhopper_ops): New target_ops struct.
6269 (MON_ROCKHOPPER): New mips_monitor_type.
6270 (read_hex_value): New function.
6271 (mips_request): Send 8-byte values with a 'T' packet. Read the
6272 packet argument as a string and use read_hex_value to parse it.
6273 (mips_exit_debug): Wait for response when using MON_ROCKHOPPER.
6274 (rockhopper_open): New function.
6275 (mips_wait): Read the PC, FP and SP fields as strings. Use
6276 read_hex_value to parse them and mips_set_register to commit them.
6277 (mips_set_register): New function.
6278 (mips_fetch_registers): Do not cast register value to "unsigned"
6279 when reading a MON_ROCKHOPPER 't' packet. Use mips_set_register.
6280 (mips_store_registers): Use a 'T' packet to set registers when
6281 using MON_ROCKHOPPER.
6282 (pmon_end_download): Don't run initEther if using MON_ROCKHOPPER
6283 and expect the total to be printed before the entry address.
6284 (_initialize_remote_mips): Initialize and add rockhopper_ops.
6286 2010-03-08 Kevin Buettner <kevinb@redhat.com>
6288 * remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
6289 Change return value to int. Store value fetched in location
6290 addressed by `val'. Use function's return value as success
6291 or failure indicator. Adjust all callers.
6293 2010-03-08 Pierre Muller <muller@ics.u-strasbg.fr>
6295 * p-lang.c (is_pascal_string_type): Check that TYPE arg is non NULL.
6297 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
6298 Hui Zhu <teawater@gmail.com>
6300 * record.c (record_open_1): Check tmp_to_stopped_by_watchpoint and
6301 tmp_to_stopped_data_address.
6302 (record_open): Reset tmp_to_stopped_by_watchpoint and
6303 tmp_to_stopped_data_address.
6304 * target.c (init_dummy_target): Add to_stopped_by_watchpoint and
6305 to_stopped_data_address.
6307 2010-03-08 Hui Zhu <teawater@gmail.com>
6309 * i386-tdep.c (i386_process_record): Initialize regnum.
6311 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
6313 * symfile.c (addr_info_make_relative): New variable sect_name, use it.
6314 Do not warn on ".gnu.liblist" and ".gnu.conflict".
6316 2010-03-08 Joel Brobecker <brobecker@adacore.com>
6318 Memory error when reading wrong core file.
6319 * solib-svr4.c (solib_svr4_r_map): catch and print all exception
6320 errors while reading the inferior memory, and return zero if
6321 an exception was raised.
6323 2010-03-07 Michael Snyder <msnyder@vmware.com>
6325 * record.c (record_restore): Rename tmpu8 to rectype.
6327 * i386-tdep.c (i386_record_lea_modrm_addr): Rename local variables
6328 tmpu8, tmpi16, tmpi32, tmpulongest to addr8, addr16, addr32, addr64.
6330 (i386_record_push): Rename local tmpulongest to addr.
6332 (i386_process_record): Rename local tmpulongest to addr.
6334 Rename local variables tmpu16, tmpu32, tmpu64 to addr16, addr32,
6337 Rename local variable tmpu8 to opcode8 and regnum.
6339 2010-03-07 Joel Brobecker <brobecker@adacore.com>
6341 * remote.c (remote_get_ada_task_ptid): New function.
6342 (init_remote_ops): Set remote_ops.to_get_ada_task_ptid.
6344 2010-03-06 Christopher Faylor <me+cygwin@cgf.cx>
6346 * windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one
6347 block. Define helper macros to reduce ifdefs in code.
6348 (get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer
6349 size. Call unadorned GetModuleFileNameEx rather than
6350 GetModuleFileNameEx*.
6351 (windows_make_so): Use __PMAX to denote maximum buffer size and
6352 cygwin_buf_t for buffer type. Use GetSystemDirectory{W,A} as
6354 (get_image_name): Use __PMAX to denote maximum buffer size.
6355 (handle_load_dll): Likewise.
6356 (windows_pid_to_exec_file): Likewise.
6357 (windows_create_inferior): Add many accommodations for older Cygwin and
6359 (bad_GetModuleFileNameExW): Control inclusion of this function based on
6360 __USEWIDE conditional.
6361 (bad_GetModuleFileNameExA): Likewise.
6362 (_initialize_loadable): Just use real function names without the dyn_
6363 part since they are defined earlier.
6365 2010-03-05 Corinna Vinschen <vinschen@redhat.com>
6366 Tom Tromey <tromey@redhat.com>
6368 * utils.c (host_char_to_target): Add 'gdbarch' argument.
6369 (parse_escape): Likewise.
6370 * python/py-utils.c (unicode_to_target_string): Update.
6371 (unicode_to_target_python_string): Update.
6372 (target_string_to_unicode): Update.
6373 * printcmd.c (printf_command): Update.
6374 * p-exp.y (yylex): Update.
6375 * objc-exp.y (yylex): Update.
6376 * mi/mi-parse.c: Include charset.h.
6377 (mi_parse_escape): New function.
6378 (mi_parse_argv): Use it.
6379 * jv-exp.y (yylex): Update.
6380 * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New
6382 (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset.
6383 * gdbarch.sh (auto_charset, auto_wide_charset): New.
6384 * gdbarch.c: Rebuild.
6385 * gdbarch.h: Rebuild.
6386 * defs.h (parse_escape): Update.
6387 * cli/cli-setshow.c: Include arch-utils.h.
6388 (do_setshow_command): Update.
6389 * cli/cli-cmds.c (echo_command): Update.
6390 * charset.h (target_charset, target_wide_charset): Update.
6391 * charset.c: Include arch-utils.h.
6392 (target_charset_name): Default to "auto".
6393 (target_wide_charset_name): Likewise.
6394 (show_target_charset_name): Handle "auto".
6395 (show_target_wide_charset_name): Likewise.
6396 (be_le_arch): New global.
6397 (set_be_le_names): Add 'gdbarch' argument.
6398 (validate): Likewise. Don't call set_be_le_names.
6399 (set_charset_sfunc, set_host_charset_sfunc)
6400 (set_target_charset_sfunc, set_target_wide_charset_sfunc):
6402 (target_charset): Add 'gdbarch' argument.
6403 (target_wide_charset): Likewise. Remove 'byte_order' argument.
6404 (auto_target_charset_name): New global.
6405 (default_auto_charset, default_auto_wide_charset): New functions.
6406 (_initialize_charset): Set auto_target_charset_name. Allow "auto"
6407 for target charsets. Copy result of nl_langinfo. Use GetACP if
6409 * c-lang.c (charset_for_string_type): Add 'gdbarch' argument,
6410 remove 'byte_order' argument. Update.
6411 (classify_type): Likewise.
6412 (c_emit_char): Update.
6413 (c_printchar): Update.
6414 (c_printstr): Update.
6415 (c_get_string): Update.
6416 (evaluate_subexp_c): Update.
6417 * arch-utils.h (default_auto_charset, default_auto_wide_charset):
6419 * python/python.c (gdbpy_target_charset): New function.
6420 (gdbpy_target_wide_charset): Likewise.
6421 (GdbMethods): Update.
6424 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
6426 * symfile.c (build_section_addr_info_from_objfile): Do not mask
6427 off high address bits.
6429 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
6431 * python/py-lazy-string.c (gdbpy_extract_lazy_string): Extract
6432 address as UnsignedLongLong, not LongLong.
6434 2010-03-05 Kevin Buettner <kevinb@redhat.com>
6435 Pedro Alves <pedro@codesourcery.com>
6437 * remote-mips.c (gdbthread.h): Include.
6438 (remote_mips_ptid): Declare.
6439 (mips_error): Only mourn the inferior when inferior_ptid is non-null.
6440 (common_open): Set inferior_ptid, add it as an inferior, and
6441 as a thread too. Delete FIXME comment regarding start_remote().
6442 (mips_close): Invoke generic_mourn_inferior().
6443 (mips_kill): Make sure that target_mourn_inferior is invoked.
6444 (mips_mourn_inferior): Don't invoke generic_mourn_inferior, as
6445 it's now invoked from mips_close().
6446 (mips_load): Don't null out inferior_ptid. Don't call
6447 clear_symtab_users().
6448 (mips_thread_alive, mips_pid_to_str): New functions.
6449 (_initialize_remote_mips): Initialize remote_mips_ptid. Initialize
6450 to_thread_alive and to_pid_to_str operations.
6452 2010-03-04 Tom Tromey <tromey@redhat.com>
6454 * dwarf2read.c (skip_one_die) <DW_FORM_ref_addr>: Use offset size
6455 in DWARF 3 and later.
6456 (read_attribute_value) <DW_FORM_ref_addr>: Likewise.
6458 2010-03-04 Keith Seitz <keiths@redhat.com>
6460 * linespec.c (decode_line_1): Update comments for is_quote_enclosed.
6461 If the filename portion of the linespec was quoted, recheck the
6462 remainder for additional quoting.
6463 (locate_first_half): Skip over completer chars, too.
6465 2010-03-04 Tom Tromey <tromey@redhat.com>
6467 * printcmd.c (printf_command): Pass dummy argument to
6470 2010-03-04 Doug Evans <dje@google.com>
6472 * arm-tdep.c (arm_make_stub_cache): Delete unused locals reg,
6475 * arm-tdep.c (arm_stub_unwind_sniffer): Add comment.
6477 2010-03-04 Pedro Alves <pedro@codesourcery.com>
6479 * breakpoint.c (update_watchpoint): Create a sentinel location if
6480 the software watchpoint isn't watching any memory.
6481 (breakpoint_address_bits): Skip dummy software watchpoint locations.
6483 2010-03-04 Pedro Alves <pedro@codesourcery.com>
6485 * utils.c (fputs_maybe_filtered): Check if there's already a top
6486 level interpreter before dereferencing it. If there isn't one,
6487 don't paginate either.
6489 2010-03-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
6491 * arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get
6492 the state right when single stepping.
6493 (arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions.
6494 Get the next PC along with the instruction state.
6495 (thumb_get_next_pc): Remove.
6496 (arm_get_next_pc): Modified to use arm_get_next_pc_raw.
6498 2010-03-04 Hui Zhu <teawater@gmail.com>
6500 * i386-tdep.c (i386_process_record): Change "addr" to "tmpu64".
6502 2010-03-03 Pedro Alves <pedro@codesourcery.com>
6504 * utils.c (fputs_maybe_filtered): Always disable pagination if the
6505 top level interpreter is MI.
6507 2010-03-03 Stan Shebs <stan@codesourcery.com>
6509 * remote.c (remote_download_tracepoint): Iterate over locations.
6510 * tracepoint.c (validate_actionline): Ditto.
6511 (encode_actions): Add location argument.
6512 (trace_dump_command): Check all locations to see if stepping
6515 2010-03-03 H.J. Lu <hongjiu.lu@intel.com>
6516 Eli Zaretskii <eliz@gnu.org>
6518 * NEWS: Add X86 general purpose registers section.
6520 2010-03-03 Tom Tromey <tromey@redhat.com>
6523 * varobj.c (install_new_value): Handle case where new print_value
6526 2010-03-03 Dainis Jonitis <jonitis@gmail.com>
6529 * printcmd.c (printf_command): Print end of format string using
6532 2010-03-02 Tom Tromey <tromey@redhat.com>
6534 * mi/mi-cmd-break.c (mi_read_next_line): Add missing 'void'.
6535 * defs.h (read_command_lines_1): Add missing 'void'.
6536 * cli/cli-script.c (recurse_read_control_structure): Add missing
6538 (read_next_line): Likewise.
6539 (read_command_lines_1): Likewise.
6541 2010-03-02 Ulrich Weigand <uweigand@de.ibm.com>
6543 * spu-tdep.c (spu_analyze_prologue): Track instruction to
6544 store backchain as part of prologue.
6546 2010-03-02 Daniel Jacobowitz <dan@codesourcery.com>
6548 * progspace.c (update_address_spaces): Update inferior address spaces
6551 2010-03-02 Doug Evans <dje@google.com>
6553 * dwarf2read.c (add_partial_subprogram): Add missing baseaddr to
6554 lowpc,highpc args to addrmap_set_empty.
6556 2010-03-02 H.J. Lu <hongjiu.lu@intel.com>
6558 * amd64-tdep.c (amd64_byte_names): New.
6559 (amd64_word_names): Likewise.
6560 (amd64_dword_names): Likewise.
6561 (amd64_pseudo_register_name): Likewise.
6562 (amd64_pseudo_register_read): Likewise.
6563 (amd64_pseudo_register_write): Likewise.
6564 (amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs
6565 and num_mmx_regs. Call set_gdbarch_pseudo_register_read,
6566 set_gdbarch_pseudo_register_write and
6567 set_tdesc_pseudo_register_name. Don't call
6568 set_gdbarch_num_pseudo_regs. Don't set mm0_regnum.
6570 * i386-tdep.c (i386_num_mmx_regs): Removed.
6571 (i386_num_pseudo_regs): Likewise.
6572 (i386_byte_names): New.
6573 (i386_word_names): Likewise.
6574 (i386_byte_regnum_p): Likewise.
6575 (i386_word_regnum_p): Likewise.
6576 (i386_mmx_regnum_p): Updated.
6577 (i386_pseudo_register_name): Make it global. Handle byte and
6578 word pseudo-registers.
6579 (i386_pseudo_register_read): Likewise.
6580 (i386_pseudo_register_write): Likewise.
6581 (i386_pseudo_register_type): Handle byte, word and dword
6583 (i386_register_reggroup_p): Don't include pseudo
6584 registers, except for MXX, in any register groups. Don't
6585 include pseudo byte, word, dword registers in general_reggroup.
6586 (i386_gdbarch_init): Set num_byte_regs, num_word_regs,
6587 num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX
6588 pseudo-registers after word pseudo-registers. Call
6589 set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi.
6591 * i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs,
6592 al_regnum, num_word_regs, ax_regnum, num_dword_regs and
6594 (i386_byte_regnum_p): New.
6595 (i386_word_regnum_p): Likewise.
6596 (i386_dword_regnum_p): Likewise.
6597 (i386_pseudo_register_name): Likewise.
6598 (i386_pseudo_register_read): Likewise.
6599 (i386_pseudo_register_write): Likewise.
6601 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
6603 * target-descriptions.c (tdesc_type): Remove
6604 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
6605 (tdesc_predefined_types): Likewise.
6606 (tdesc_gdb_type): Likewise. Pass NULL to append_flags_type_flag
6607 if flag name is empty.
6608 (maint_print_c_tdesc_cmd): Handle TDESC_TYPE_FLAGS.
6610 * features/i386/32bit-core.xml: Define i386_eflags.
6611 * features/i386/64bit-core.xml: Likewise.
6613 * features/i386/32bit-sse.xml: Define i386_mxcsr.
6614 * features/i386/64bit-sse.xml: Likewise.
6616 * features/i386/amd64-linux.c: Regenerated.
6617 * features/i386/amd64.c: Likewise.
6618 * features/i386/i386-linux.c: Likewise.
6619 * features/i386/i386.c: Likewise.
6621 2010-03-01 Daniel Jacobowitz <dan@codesourcery.com>
6623 * gdbtypes.c (append_composite_type_field_raw): New.
6624 (append_composite_type_field_aligned): Use the new function.
6625 * gdbtypes.h (append_composite_type_field_raw): Declare.
6626 * target-descriptions.c (struct tdesc_type_field): Add start and end.
6627 (struct tdesc_type_flag): New type.
6628 (struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to
6629 kind. Add size to u.u. Add u.f for flags.
6630 (tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS.
6631 (tdesc_free_type): Likewise.
6632 (tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New.
6633 (tdesc_add_field): Handle TDESC_TYPE_STRUCT.
6634 (tdesc_add_bitfield, tdesc_add_flag): New.
6635 * target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size)
6636 (tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare.
6637 * xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to
6638 current_type. Add current_type_size and current_type_is_flags.
6639 (tdesc_start_union): Clear the new fields.
6640 (tdesc_start_struct, tdesc_start_flags): New.
6641 (tdesc_start_field): Handle struct fields, including bitfields.
6642 (field_attributes): Make type optional. Add start and end.
6643 (union_children): Rename to struct_union_children.
6644 (union_attributes): Rename to struct_union_attributes. Add optional
6646 (flags_attributes): New.
6647 (feature_children): Add struct and flags.
6648 * features/gdb-target.dtd: Add flags and struct to features.
6649 Make field type optional. Add field start and end.
6651 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
6653 * amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New.
6654 (amd64_linux_read_description): Likewise.
6655 (_initialize_amd64_linux_nat): Set to_read_description to
6656 amd64_linux_read_description.
6658 * amd64-linux-tdep.c: Include "features/i386/amd64-linux.c".
6659 (amd64_linux_register_name): Removed.
6660 (amd64_linux_register_type): Likewise.
6661 (amd64_linux_core_read_description): New.
6662 (amd64_linux_init_abi): Set target description to
6663 tdesc_amd64_linux if needed. Support orig_rax in target
6664 description. Don't call set_gdbarch_register_name nor
6665 set_gdbarch_register_type. Call
6666 set_gdbarch_core_read_description.
6667 (_initialize_amd64_linux_tdep): Call
6668 initialize_tdesc_amd64_linux.
6670 * amd64-linux-tdep.h (tdesc_amd64_linux): New.
6672 * amd64-tdep.c: Include "features/i386/amd64.c".
6673 (amd64_register_names): Removed.
6674 (amd64_register_name): Likewise.
6675 (amd64_register_type): Likewise.
6676 (amd64_init_abi): Set num_core_regs and register_names. Set
6677 target description to tdesc_amd64 if needed. Don't call
6678 set_gdbarch_register_name nor set_gdbarch_register_type.
6679 (_initialize_amd64_tdep): New.
6681 * i386-linux-nat.c (i386_linux_read_description): New.
6682 (_initialize_i386_linux_nat): Set to_read_description to
6683 i386_linux_read_description.
6685 * i386-linux-tdep.c: Include "features/i386/i386-linux.c".
6686 (i386_linux_register_name): Removed.
6687 (i386_linux_core_read_description): New.
6688 (i386_linux_read_description): Likewise.
6689 (i386_linux_init_abi): Don't call set_gdbarch_register_name.
6690 Set target description to tdesc_i386_linux if needed. Support
6691 orig_eax. Set register_reggroup_p. Call
6692 set_gdbarch_core_read_description.
6693 (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux.
6695 * i386-linux-tdep.h (tdesc_i386_linux): New.
6697 * i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS
6700 * i386-tdep.c: Include "features/i386/i386.c".
6701 (i386_register_names): Make it const.
6702 (i386_mmx_names): Likewise.
6703 (i386_num_register_names): Removed.
6704 (i386_register_name): Likewise.
6705 (i386_eflags_type): Likewise.
6706 (i386_mxcsr_type): Likewise.
6707 (i386_sse_type): Likewise.
6708 (i386_register_type): Likewise.
6709 (i387_ext_type): Call tdesc_find_type instead of arch_float_type.
6710 (i386_pseudo_register_name): New.
6711 (i386_pseudo_register_type): Likewise.
6712 (i386_mmx_type): Make it static.
6713 (i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with
6714 I387_NUM_REGS. Set num_core_regs and register_names. Don't
6715 call set_gdbarch_register_name nor set_gdbarch_register_type.
6716 Set register_reggroup_p. Set target description to tdesc_i386
6717 if needed. Call set_tdesc_pseudo_register_type,
6718 set_tdesc_pseudo_register_name and tdesc_use_registers.
6719 (_initialize_i386_tdep): Call initialize_tdesc_i386.
6720 initialize_tdesc_x86_64.
6722 * i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type,
6723 i386_mxcsr_type and i386_sse_type. Add num_core_regs,
6724 register_names, tdesc and register_reggroup_p.
6725 (I386_NUM_FREGS): Removed.
6726 (i386_eflags_type): Likewise.
6727 (i386_mxcsr_type): Likewise.
6728 (i386_mmx_type): Likewise.
6729 (i386_sse_type): Likewise.
6730 (i386_register_name): Likewise.
6731 (i386_regnum): Add I386_MXCSR_REGNUM.
6732 (I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM.
6734 * i387-tdep.h (I387_NUM_REGS): New.
6736 * regformats/i386/i386-linux.dat: Generated.
6737 * regformats/i386/i386.dat: Likewise.
6738 * regformats/i386/amd64-linux.dat: Likewise.
6739 * regformats/i386/amd64.dat: Likewise.
6741 * regformats/reg-i386-linux.dat: Removed.
6742 * regformats/reg-i386.dat: Likewise.
6743 * regformats/reg-x86-64-linux.dat: Likewise.
6744 * regformats/reg-x86-64.dat: Likewise.
6746 2010-03-01 Corinna Vinschen <vinschen@redhat.com>
6748 * remote-fileio.c (remote_fileio_func_rename): Use Cygwin 1.7
6749 cygwin_conv_path API rather than the deprecated
6750 cygwin_conv_to_full_posix_path.
6752 (GetModuleFileNameExA): Undefine for Cygwin.
6753 (GetModuleFileNameExW): Define for Cygwin.
6754 (get_module_name): Change size of pathbuf to PATH_MAX for Cygwin.
6755 Call GetModuleFileNameExW and convert path to POSIX using
6757 (windows_make_so): Always define p. Drop unused variable m.
6758 Don't use Win32 functions to check file existance, rather use
6759 access on Cygwin. Fetch system directory using GetSystemDirectoryW.
6760 Use canonicalize_file_name to get full path.
6761 (get_image_name): Use wcstombs, rather than WideCharToMultiByte
6762 to convert Unicode pathname to multibyte on Cygwin. Otherwise,
6763 use correct target buffer size in call to WideCharToMultiByte.
6764 (handle_load_dll): Change size of dll_buf to PATH_MAX for Cygwin.
6765 (windows_pid_to_exec_file): Change size of path to PATH_MAX for Cygwin.
6766 (windows_create_inferior): Convert all paths and arguments to wchar_t
6767 and use CreateProcessW on Cygwin.
6768 (_initialize_windows_nat): Disable DOS-style path warning on Cygwin.
6769 (bad_GetModuleFileNameExA): Undefine for Cygwin.
6770 (bad_GetModuleFileNameExW): Define for Cygwin.
6771 (_initialize_loadable): Load GetModuleFileNameExW into
6772 dyn_GetModuleFileNameExW on Cygwin. Don't load ANSI function on Cygwin.
6774 2010-02-28 Phil Muldoon <pmuldoon@redhat.com>
6777 * python/py-frame.c (frapy_read_var): Add block argument and logic
6778 to cope with user provided blocks.
6780 2010-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
6782 * infcall.c (call_function_by_hand): Remove gdb_assert on sp and old_sp.
6785 2010-02-28 Corinna Vinschen <vinschen@redhat.com>
6787 * Makefile.in (SUBDIR_MI_OBS): Move mi-common.o from here...
6788 (COMMON_OBS): ... to here since it's used unconditionally.
6789 (SUBDIR_MI_SRCS): Move mi/mi-common.c from here...
6792 2010-02-26 David Daney <ddaney@caviumnetworks.com>
6794 * mips-linux-tdep.c: Update struct sigframe comments.
6795 (SIGFRAME_CODE_OFFSET): Delete macro.
6796 (mips_linux_o32_sigframe_init): Calculate sigcontext_base using
6798 (mips_linux_n32n64_sigframe_init): Same.
6800 2010-02-26 Kevin Buettner <kevinb@redhat.com>
6802 * remote-mips.c (mips_load): Don't use pseudo-register when
6803 invalidating regcache.
6805 2010-02-26 Daniel Jacobowitz <dan@codesourcery.com>
6807 * arm-tdep.c (thumb_get_next_pc): Correct conditional branch opcode.
6809 2010-02-26 Pedro Alves <pedro@codesourcery.com>
6811 * NEWS: Add "New targets" section, and mention ARM Symbian
6814 2010-02-26 Ulrich Weigand <uweigand@de.ibm.com>
6816 * dwarf2loc.c (struct piece_closure): Remove ARCH member,
6817 add ADDR_SIZE member.
6818 (allocate_piece_closure): Update.
6819 (copy_pieced_value_closure): Likewise.
6820 (dwarf2_evaluate_loc_desc): Likewise.
6821 (read_pieced_value): Use DWARF address size instead of
6822 GDB's gdbarch_addr_bit as size of values on the DWARF stack.
6824 2010-02-26 Phil Muldoon <pmuldoon@redhat.com>
6825 Tom Tromey <tromey@redhat.com>
6827 * python/py-type.c (typy_lookup_typename): Add in block argument.
6828 If provided restrict lookup to specified blocks.
6829 (gdbpy_lookup_type): Likewise.
6830 (typy_lookup_type): Likewise.
6832 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
6837 * arm-symbian-tdep.c: New.
6838 * configure.tgt (arm*-*-symbianelf*): New target.
6839 (*-*-symbianelf*): New OS.
6840 * osabi.c (gdb_osabi_names): Add Symbian.
6841 * defs.h (gdb_osabi): Add GDB_OSABI_SYMBIAN.
6842 * Makefile.in (ALL_TARGET_OBJS): Add arm-symbian-tdep.o.
6843 (ALLDEPFILES): Add arm-symbian-tdep.c.
6845 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
6847 * symfile.c (find_lowest_section): Include SEC_ALLOC sections.
6849 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6851 * mi/mi-main.c (mi_cmd_execute): Fix typo.
6853 2010-02-24 Phil Muldoon <pmuldoon@redhat.com>
6854 Tom Tromey <tromey@redhat.com>
6855 Thiago Jung Bauermann <bauerman@br.ibm.com>
6857 * python/python.c (_initialize_python): Call
6858 gdbpy_initialize_symtabs, gdbpy_initialize_symbols and
6859 gdbpy_initialize_blocks.
6860 * python/python-internal.h: Declare struct symbol, block and
6861 symtab_and_line. Declare block_object_type and
6863 (gdbpy_lookup_symbol gdbpy_block_for_pc)
6864 (symtab_and_line_to_sal_object, symtab_to_symtab_object)
6865 (symbol_to_symbol_object, block_to_block_object)
6866 (gdbpy_initialize_symtabs,gdbpy_initialize_symbols)
6867 (gdbpy_initialize_blocks ): Declare.
6868 * python/py-frame.c (frapy_block, frapy_function, frapy_find_sal)
6869 (frapy_select): Add methods.
6870 (frapy_read_var): Add symbol branch.
6871 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-symbol, py-symtab,
6873 (SUBDIR_PYTHON_SRCS): Likewise.
6874 (py-symbol.o): New rule.
6875 (py-symtab.o): Likewise.
6876 (py-block.o): Likewise.
6877 * python/py-symbol.c: New file.
6878 * python/py-symtab.c: Likewise.
6879 * python/py-block.c: Likewise.
6881 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6885 * inferior.h (prepare_for_detach): Declare.
6886 (struct inferior) <detaching>: New field.
6887 * infrun.c (prepare_for_detach): New.
6888 (handle_inferior_event) <random signal>: Don't stop if detaching.
6889 * target.c (target_detach): Call prepare_for_detach.
6891 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6893 Per-process displaced stepping queue.
6895 * infrun.c (displaced_step_ptid, displaced_step_request_queue)
6896 (displaced_step_gdbarch, displaced_step_closure,
6897 (displaced_step_original, displaced_step_copy): Move globals to
6899 (struct displaced_step_inferior_state): ... new structure.
6900 (displaced_step_inferior_states): New global.
6901 (get_displaced_stepping_state, add_displaced_stepping_state)
6902 (remove_displaced_stepping_state, infrun_inferior_exit): New
6904 (displaced_step_clear): Add displaced_step_inferior_state
6905 parameter, and adjust to handle it.
6906 (displaced_step_clear_cleanup): Parameter is now a
6907 displaced_step_inferior_state. Adjust.
6908 (displaced_step_prepare): Adjust.
6909 (displaced_step_fixup, displaced_step_fixup)
6910 (infrun_thread_ptid_changed, resume): Adjust.
6911 (init_wait_for_inferior): Don't call displaced_step_clear.
6912 (infrun_thread_stop_requested): Rewrite.
6913 (_initialize_infrun): Install infrun_inferior_exit as
6914 inferior_exit observer.
6916 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6918 * inferior.h (ptid_match): Declare.
6919 * infrun.c (ptid_match): New.
6920 * remote.c (queued_stop_reply): Rewrite and use ptid_match.
6921 (handle_notification): Add debug output.
6922 * linux-nat.c (ptid_match): Delete.
6924 2010-02-24 David S. Miller <davem@davemloft.net>
6926 * gdb_ptrace.h (PT_SYSCALL): If PTRACE_SYSCALL is available, use it.
6927 * syscalls/sparc-linux.xml: New.
6928 * syscalls/sparc64-linux.xml: New.
6929 * Makefile.in (XML_SYSCALL_FILES): Add new syscall XML files.
6930 * sparc-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC32): Define.
6931 (sparc32_linux_get_syscall_number): New function.
6932 (sparc32_linux_init_abi): Set syscall XML file name and hook up
6933 syscall number fetcher.
6934 * sparc64-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC64): Define.
6935 (sparc64_linux_get_syscall_number): New function.
6936 (sparc64_linux_init_abi): Set syscall XML file name and hook up
6937 syscall number fetcher.
6939 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
6943 * breakpoint.c (clear_syscall_counts): Take struct inferior*.
6944 * inferior.c (add_inferior_silent): Notify inferior_added
6946 (delete_inferior_1): Notify inferior_removed observer.
6947 (exit_inferior_1): Pass inferior, not pid, to observer.
6948 (inferior_appeared): Likewise.
6949 (add_inferior_with_spaces): New.
6950 (add_inferior_command): Use the above.
6951 * inferior.h (delete_inferior_1, add_inferior_with_spaces):
6954 * inflow.c (inflow_inferior_exit): Likewise.
6955 * jit.c (jit_inferior_exit_hook): Likewise.
6957 * mi/mi-cmds.c (mi_cmds): Register add-inferior and
6959 * mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
6960 * mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
6961 (report_initial_inferior): New.
6962 (mi_inferior_removed): Register the above. Make sure
6963 inferior_added observer is called on the first inferior.
6964 (mi_new_thread, mi_thread_exit): Thread group is now identified by
6965 inferior number, not pid.
6966 (mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
6968 * mi/mi-main.c (current_context): New.
6969 (proceed_thread_callback): Use typed closure.
6970 Proceed everything if pid is 0. Most implementation split into
6971 (proceed_thread): ... this.
6972 (run_one_inferior): New.
6973 (mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
6974 Adjust for multiexec behaviour.
6975 (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
6976 (mi_cmd_execute): Handle the 'thread-group' option here.
6977 Do some extra checks.
6978 * mi-parse.c (mi_parse): Handle the --all and --thread-group
6980 * mi-parse.h (struct mi_parse): New fields all and thread_group.
6982 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
6984 Make -exec-run a proper MI commands.
6986 * mi/mi-cmds.h (mi_cmd_exec_run): Declare.
6987 * mi/mi-cmds.c (mi_cmds): Adjust.
6988 * mi/mi-main.c (mi_cmd_exec_run): New.
6990 2010-02-24 Pedro Alves <pedro@codesourcery.com>
6991 Stan Shebs <stan@codesourcery.com>
6993 * tracepoint.h (set_traceframe_number)
6994 (cleanup_restore_current_traceframe): Declare.
6995 * tracepoint.c (set_traceframe_number): New.
6996 (struct current_traceframe_cleanup): New.
6997 (do_restore_current_traceframe_cleanup)
6998 (restore_current_traceframe_cleanup_dtor)
6999 (make_cleanup_restore_current_traceframe): New.
7000 * infrun.c: Include tracepoint.h.
7001 (fetch_inferior_event): Switch out and in of tfind mode.
7003 2010-02-24 Pedro Alves <pedro@codesourcery.com>
7005 * breakpoint.c (breakpoint_init_inferior): Also delete
7006 bp_shlib_event breakpoints.
7007 * solib-frv.c (enable_break): Remove call to
7008 remove_solib_event_breakpoints.
7009 * solib-svr4.c (enable_break): Ditto.
7010 * solib-darwin.c (darwin_solib_create_inferior_hook): Ditto.
7011 * solib-pa64.c (pa64_solib_create_inferior_hook): Ditto.
7012 * solib-som.c (som_solib_create_inferior_hook): Ditto.
7013 * solib-spu.c (spu_enable_break): Ditto.
7015 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
7017 * c-exp.y (token_and_value): s/union YYSTYPE/YYSTYPE.
7019 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
7021 * varobj.c (varobj_update): Avoid non-constants in initializers.
7023 2010-02-23 Tom Tromey <tromey@redhat.com>
7025 * dwarf2loc.c (read_pieced_value) <DWARF_VALUE_STACK>: Correctly
7026 handle big-endian values.
7027 (dwarf2_evaluate_loc_desc) <DWARF_VALUE_STACK>: Likewise.
7029 2010-02-22 Pedro Alves <pedro@codesourcery.com>
7034 * breakpoint.c (insert_bp_location): If inserting the read
7035 watchpoint failed, fallback to an access watchpoint.
7036 (bpstat_check_watchpoint): Stop for read watchpoint triggers even
7037 if the value changed, if not watching the same memory for writes.
7038 (watchpoint_locations_match): Add comment.
7039 (update_global_location_list): Copy the location's watchpoint type.
7040 * i386-nat.c (i386_length_and_rw_bits): It's an internal error to
7041 handle read watchpoints here.
7042 (i386_insert_watchpoint): Read watchpoints aren't supported.
7043 * remote.c (remote_insert_watchpoint): Return 1 for unsupported
7045 * target.h (target_insert_watchpoint): Update description.
7047 2010-02-19 Tom Tromey <tromey@redhat.com>
7049 * p-typeprint.c (pascal_type_print_varspec_prefix): Update.
7050 * m2-typeprint.c (m2_print_type): Update.
7051 * gdbtypes.c (recursive_dump_type): Update.
7052 (copy_type_recursive): Update.
7053 * c-typeprint.c (c_type_print_varspec_prefix): Update.
7054 (c_type_print_base): Update.
7055 * gdbtypes.h (TYPE_CODE_TEMPLATE, TYPE_CODE_TEMPLATE_ARG):
7057 (struct cplus_struct_type) <ntemplate_args>: Remove.
7058 <struct template_arg>: Remove.
7059 <is_dynamic>: Move earlier.
7060 (TYPE_TEMPLATE_ARGS): Remove.
7061 (TYPE_NTEMPLATE_ARGS): Remove.
7062 (TYPE_TEMPLATE_ARG): Remove.
7064 2010-02-19 Tom Tromey <tromey@redhat.com>
7066 PR c++/8693, PR c++/9496:
7067 * cp-namespace.c (cp_lookup_nested_type): Handle TYPE_CODE_UNION.
7068 * c-exp.y (lex_one_token): Rename from yylex. Don't call
7069 write_dollar_variable. Don't try to classify NAME tokens.
7070 (token_and_value): New type.
7071 (token_fifo, popping, name_obstack): New globals.
7072 (classify_name): New function.
7073 (classify_inner_name): Likewise.
7075 (VARIABLE): Now has type sval.
7076 (exp : VARIABLE): Call write_dollar_variable.
7077 (qualified_name): Use TYPENAME, not typebase. Add production for
7078 multiple "::" instances.
7079 (variable): Use name_not_typename.
7080 (qualified_type): Remove.
7083 2010-02-19 Jan Kratochvil <jan.kratochvil@redhat.com>
7085 * symfile.c (addr_info_make_relative): Extend comment. Move SECT to
7086 a more inner block. Initialize ADDR by LOWER_OFFSET only if it was
7087 found by bfd_get_section_by_name.
7088 * symfile.h (struct section_addr_info) <sectindex>: New comment.
7090 2010-02-19 Joel Brobecker <brobecker@adacore.com>
7092 * NEWS: Add new "[...] since 7.1" section. Rename the "[...] since
7093 7.0 section" into "Changes in 7.1".
7095 2010-02-19 Joel Brobecker <brobecker@adacore.com>
7097 GDB 7.1 branch created (branch timestamp: 2010-02-18 20:00 UTC)
7098 * version.in: Bump version to 7.1.50.20100219-cvs.
7100 2010-02-18 Harald Koenig <H.Koenig@science-computing.de>
7102 * mi/mi-main.c (mi_cmd_exec_jump): Drop unneeded `return'.
7103 * symfile.c (symfile_map_offsets_to_segments): Fix assertion.
7105 2010-02-17 Tom Tromey <tromey@redhat.com>
7107 * NEWS: Add Python API Improvements section.
7109 2010-02-18 Daniel Jacobowitz <dan@codesourcery.com>
7111 * NEWS: Correct typo.
7113 2010-02-17 Tom Tromey <tromey@redhat.com>
7115 * objfiles.c (gdb_bfd_ref): Handle abfd==NULL.
7117 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
7119 * symfile.c (build_section_addr_info_from_objfile): Include sections
7120 only if they are SEC_ALLOC or SEC_LOAD.
7122 2010-02-17 H.J. Lu <hongjiu.lu@intel.com>
7125 * solib-svr4.c (enable_break): Check size of CORE_ADDR instead
7126 of ULONGEST for address size.
7128 2010-02-17 Tom Tromey <tromey@redhat.com>
7130 * NEWS: Add C++ improvements section.
7132 2010-02-17 Ulrich Weigand <uweigand@de.ibm.com>
7134 * python/python-internal.h [!WITH_THREAD] (PyGILState_Release,
7135 PyThreadState_Swap): Avoid "statement with no effect" warning.
7137 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
7139 * solib-svr4.c (enable_break <target_auxv_search>): New variable
7140 addr_bit. Adjust LOAD_ADDR sign for cross-arch inferiors.
7142 2010-02-17 Tristan Gingold <gingold@adacore.com>
7143 Petr Hluzin <petr.hluzin@gmail.com>
7145 * avr-tdep.c (avr_scan_prologue): Convert an if statement to a
7146 gdb_assert. Fix info->size for SIG prologue.
7148 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7150 * infcmd.c (show_inferior_tty_command): Check for NULL.
7151 Correct output message.
7153 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7155 * linespec.c (decode_line_1): Handle FILE:FUNCTION even if
7156 FUNCTION contains parentheses. Improve removal of a trailing
7159 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7161 * gcore.c (do_bfd_delete_cleanup): New function.
7162 (gcore_command): Use it. Discard the cleanup after success.
7163 (gcore_copy_callback): Delete dead code.
7165 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
7167 * symfile.c (addr_info_make_relative): Always use
7168 find_lowest_section.
7170 2010-02-16 Sami Wagiaalla <swagiaal@redhat.com>
7172 * NEWS: Added entry for namespace fixes.
7174 2010-02-15 Tom Tromey <tromey@redhat.com>
7176 * dwarf2read.c (guess_structure_name): Allocate name on the
7179 2010-02-15 Tom Tromey <tromey@redhat.com>
7181 * c-typeprint.c (c_type_print_base): Reverse order of test.
7183 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
7185 * solib-svr4.c (LM_ADDR_CHECK): New variable minpagesize. Optionally
7186 initialize it from ELF BFD. Extend the prelink condition by it.
7188 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
7190 * defs.h (parse_pid_to_attach): New.
7191 * utils.c (parse_pid_to_attach): New.
7192 * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid.
7193 * gnu-nat.c (gnu_attach): Likewise.
7194 * nto-procfs.c (procfs_attach): Likewise.
7195 * procfs.c (procfs_attach): Likewise.
7196 * windows-nat.c (windows_attach): Likewise.
7197 * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy.
7198 * inf-ttrace.c (inf_ttrace_attach): Likewise.
7199 * remote.c (extended_remote_attach_1): Likewise. New comment on getpid
7202 2010-02-14 Masaki Muranaka <monaka@monami-software.com>
7204 * MAINTAINERS: Add myself for write after approval privileges.
7206 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
7208 * solib-svr4.c: (LM_ADDR_CHECK): Move variable align to a more inner
7211 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
7213 * solib-svr4.c: (LM_ADDR_CHECK): Print successful prelink adjustment
7214 only if INFO_VERBOSE.
7216 2010-02-12 Tomas Holmberg <th@virtutech.com>
7218 * mi/mi-main.c: Added the --reverse flag to the following MI
7219 commands: exec-continue, exec-finish, exec-next, exec-step,
7220 exec-next-instruction, exec-step-instruction. This is to
7221 support reverse execution over the MI interface to gdb.
7223 2010-02-12 Pedro Alves <pedro@codesourcery.com>
7225 * tracepoint.c (_initialize_tracepoint): Specify that the address
7226 range of `tfind outsize' is exclusive, and that the address range
7227 of `tfind range' is inclusive, in the commands' help strings.
7229 2010-02-12 Joel Brobecker <brobecker@adacore.com>
7231 Spurious "dll not found" error messages on x64-windows.
7232 * windows-nat.c: Add include of complaints.h.
7233 (handle_unload_dll): Change dll-not-found error into a complaint.
7235 2010-02-12 Pedro Alves <pedro@codesourcery.com>
7237 * breakpoint.c (allocate_bp_location): Use bp_loc_other for
7238 bp_tracepoint and bp_fast_tracepoint, not
7239 bp_loc_software_breakpoint.
7240 (update_global_location_list): Tracepoints are never duplicates of
7243 2010-02-12 Pedro Alves <pedro@codesourcery.com>
7245 * breakpoint.c (break_command_really): Change return type to int.
7246 Return false if no breakpoint was created, true otherwise.
7247 (trace_command): Don't set the tracepoint count if no tracepoint
7249 (ftrace_command): Ditto.
7250 (create_tracepoint_from_upload): Bail out if the tracepoint wasn't
7251 created in the breakpoints table.
7253 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7254 Ulrich Weigand <uweigand@de.ibm.com>
7256 * solib-svr4.c (LM_ADDR_CHECK): New comment on PPC-aware condition.
7258 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7260 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out if
7261 the offset value isn't of integral type.
7263 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
7265 * breakpoint.c (delete_breakpoint) <bpt->related_breakpoint != NULL>:
7268 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7270 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out on
7271 non-subscriptable types.
7272 * valarith.c (binop_types_user_defined_p): New, abstracted out
7274 (binop_user_defined_p): ... this.
7275 * value.h (binop_types_user_defined_p): Declare.
7277 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7279 * tracepoint.c (tfile_open): Remove spurious discard_cleanups.
7280 Merge uploaded TSVs before merging uploaded tracepoints.
7282 2010-02-11 Pedro Alves <pedro@codesourcery.com>
7284 * ax-gdb.c (gen_deref): Don't allow dereferencing void pointers.
7286 2010-02-11 Vladimir Prus <vladimir@codesourcery.com>
7288 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Add extra
7289 whitespace character after a dot in comment.
7290 (mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables):
7292 (list_args_or_locals): For the 'all' (that is
7293 -stack-list-variables) case, always output list of tuples.
7294 Output 'arg' field if variable is argument.
7296 2010-02-10 Tom Tromey <tromey@redhat.com>
7298 * parser-defs.h (parser_debug): Declare.
7299 * parse.c (_initialize_parse): Install "debug parser" set/show
7301 (parser_debug): New global.
7302 (show_parserdebug): New function.
7303 * c-exp.y (c_parse): Set yydebug.
7305 2010-02-10 H.J. Lu <hongjiu.lu@intel.com>
7307 * target-descriptions.c (tdesc_type): Add TDESC_TYPE_I387_EXT,
7308 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
7309 (tdesc_predefined_types): Add i387_ext, i386_eflags and
7311 (tdesc_find_type): New.
7312 (tdesc_gdb_type): Use tdesc_find_type. Handle TDESC_TYPE_I387_EXT,
7313 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
7315 * target-descriptions.h (tdesc_find_type): New.
7317 2010-02-10 Michael Snyder <msnyder@vmware.com>
7319 * gdb-gdb.py: Comment fix.
7321 2010-02-09 Tristan Gingold <gingold@adacore.com>
7323 * machoread.c (macho_symfile_relocate): New function.
7324 (macho_sym_fns): Use macho_symfile_relocate instead of
7325 default_symfile_relocate.
7326 (macho_oso_data): New type.
7327 (current_oso): New variable.
7328 (macho_add_oso_symfile): Do not compute section_addr_info, but
7329 instead set vma of sections.
7330 Do not set SYMFILE_VERBOSE to call symbol_file_add_from_bfd.
7331 Set and clear current_oso.
7333 2010-02-09 Joel Brobecker <brobecker@adacore.com>
7335 Wrong type description for tagged type parameter.
7336 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: When noside is
7337 EVAL_AVOID_SIDE_EFFECTS, also handle the case when type is a
7338 reference to a tagged type.
7340 2010-02-09 Tristan Gingold <gingold@adacore.com>
7342 * objfiles.c (objfile_separate_debug_iterate): Do not iterate on
7343 brothers of the parent.
7345 2010-02-08 Tom Tromey <tromey@redhat.com>
7349 * valops.c (search_struct_field): Make 'name' const.
7350 (search_struct_method): Likewise.
7351 (find_method_list): Make 'method' const.
7352 (value_struct_elt): Make 'name' and 'err' const.
7353 (value_find_oload_method_list): Make 'method' const.
7354 (find_overload_match): Make 'name' const.
7355 * eval.c (evaluate_subexp_standard): New locals function,
7357 <OP_FUNCALL>: Handle OP_SCOPE specially.
7359 2010-02-08 Ulrich Weigand <uweigand@de.ibm.com>
7361 * infrun.c (handle_inferior_event): Do not look up regcache
7362 for exited processes.
7364 2010-02-08 Chris Moller <moller@mollerware.com>
7367 * valarith.c (value_ptrdiff): Added a test for a zero type length,
7368 warn if found, and assume length = 1.
7370 2010-02-08 Chris Moller <cmoller@redhat.com>
7373 * cp-valprint.c (cp_print_value_fields) Fix use of obstacks.
7374 (cp_print_static_field) Fix use of obstacks.
7376 2010-02-08 Pedro Alves <pedro@codesourcery.com>
7378 * linux-nat.c (linux_nat_resume): In non-stop, also only tag
7379 resumed LWPs as resumed.
7380 (linux_nat_wait_1): If there's no resumed LWP in the set of LWPs
7381 we're waiting for, bail out with TARGET_WAITKIND_IGNORE, instead
7382 of throwing an internal error. If an LWP of a process we're not
7383 waiting for reports a signal, don't force collecting a SIGSTOP,
7384 and if it was breakpoint hit in non-stop mode, cancel it. Don't
7385 go through all LWPs cancelling breakpoints in non-stop mode.
7386 (resume_stopped_resumed_lwps): New.
7387 (linux_nat_wait): Use it.
7389 2010-02-07 H.J. Lu <hongjiu.lu@intel.com>
7391 * features/Makefile (WHICH): Add i386/i386, i386/i386-linux,
7392 i386/amd64 and i386/amd64-linux.
7393 (i386/i386-expedite): New.
7394 (i386/i386-linux-expedite): Likewise.
7395 (i386/amd64-expedite):Likewise.
7396 (i386/amd64-linux-expedite): Likewise.
7397 ($(outdir)/i386/i386-linux.dat): Likewise.
7398 ($(outdir)/i386/amd64.dat): Likewise.
7399 ($(outdir)/i386/amd64-linux.dat): Likewise.
7401 * features/i386/32bit-core.xml: New.
7402 * features/i386/32bit-linux.xml: Likewise.
7403 * features/i386/32bit-sse.xml: Likewise.
7404 * features/i386/64bit-core.xml: Likewise.
7405 * features/i386/64bit-linux.xml: Likewise.
7406 * features/i386/64bit-sse.xml: Likewise.
7407 * features/i386/i386-linux.xml: Likewise.
7408 * features/i386/i386.xml: Likewise.
7409 * features/i386/amd64-linux.xml: Likewise.
7410 * features/i386/amd64.xml: Likewise.
7411 * features/i386/i386-linux.c: Likewise.
7412 * features/i386/i386.c: Likewise.
7413 * features/i386/amd64-linux.c: Likewise.
7414 * features/i386/amd64.c: Likewise.
7416 2010-02-05 Sami Wagiaalla <swagiaal@redhat.com>
7419 * cp-support.h: Added char* alias element to using_direct data
7421 (cp_add_using): Added char* alias argument.
7422 (cp_add_using_directive): Ditto.
7423 * cp-namespace.c: Updated with the above changes.
7424 (cp_lookup_symbol_imports): Check for aliases.
7425 * dwarf2read.c (read_import_statement): Figure out local alias
7426 for the import and pass it on to cp_add_using.
7427 (read_namespace): Pass alias argument to cp_add_using.
7429 2010-02-05 Hui Zhu <teawater@gmail.com>
7431 * defs.h (gdb_bfd_errmsg): New extern.
7432 * exec.c (exec_file_attach): Change bfd_errmsg to
7434 * utils.c (AMBIGUOUS_MESS1): New macro.
7435 (AMBIGUOUS_MESS2): New macro.
7436 (gdb_bfd_errmsg): New function.
7438 2010-02-04 Doug Evans <dje@google.com>
7440 * solib-svr4.c (enable_break): Add comment.
7442 2010-02-04 Anthony Green <green@moxielogic.com>
7444 * moxie-tdep.c (moxie_analyze_prologue): Fail protocol analysis
7447 2010-02-04 Tom Tromey <tromey@redhat.com>
7449 * valops.c (search_struct_field): Account for
7450 value_embedded_offset. Fix check for virtual base past the end of
7451 the object. Use value_copy when making a slice of the value.
7453 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
7456 * tui/tui-interp.c (tui_init): Call tui_initialize_readline
7457 only if gdb_stdout is a tty.
7459 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
7461 * target-descriptions.c: Include "osabi.h".
7462 (maint_print_c_tdesc_cmd): Generate set_tdesc_osabi for valid
7465 2010-02-04 Tristan Gingold <gingold@adacore.com>
7467 * machoread.c (macho_add_oso): Renamed to macho_register_oso.
7468 (macho_symtab_read): Adjust calls to macho_add_oso.
7469 (macho_oso_symfile): Renamed to macho_symfile_read_all_oso.
7470 (macho_symfile_read): Adjust call to macho_oso_symfile.
7471 (macho_new_init): Move this function after declarations.
7472 (macho_symfile_init): Ditto.
7473 * darwin-nat-info.c (darwin_lib_gdb_ports): Remove.
7474 * darwin-nat.c (darwin_lookup_task): Remove unused prototype.
7476 2010-02-04 Vladimir Prus <vladimir@codesourcery.com>
7478 Include MI command in remotelog.
7480 * mi/mi-main.c (mi_execute_command): Call target_log_command.
7482 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
7484 * remote.c (remote_state): Remove gdbarch.
7485 (init_remote_state): Don't set gdbarch.
7486 (remote_query_supported): Pass target_gdbarch instead of
7487 rs->gdbarch to gdbarch_qsupported.
7489 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
7491 * gdbarch.sh: Add qsupported.
7493 * gdbarch.c: Regenerated.
7494 * gdbarch.h: Likewise.
7496 * remote.c (remote_state): Add gdbarch.
7497 (init_remote_state): Set gdbarch.
7498 (remote_query_supported): Support gdbarch_qsupported.
7500 2010-02-03 Daniel Jacobowitz <dan@codesourcery.com>
7502 * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Also check for
7503 __FreeBSD_kernel_version.
7505 2010-02-03 Tristan Gingold <gingold@adacore.com>
7507 * symfile.h (struct sym_fns): Add sym_relocate field.
7508 (default_symfile_relocate): New prototype.
7509 (symfile_relocate_debug_section): First argument is now an objfile.
7510 * symfile.c (default_symfile_relocate): Rename from
7511 symfile_relocate_debug_section, first argument is now an objfile.
7512 (symfile_relocate_debug_section): New function.
7513 * coffread.c (coff_sym_fns): Set sym_relocate field.
7514 * somread.c (som_sym_fns): Ditto.
7515 * mipsread.c (ecoff_sym_fns): Ditto.
7516 * machoread.c (macho_sym_fns): Ditto.
7517 * elfread.c (elf_sym_fns): Ditto.
7518 * dwarf2read.c (dwarf2_read_section): Ditto.
7519 * xcoffread.c (xcoff_sym_fns): Ditto.
7520 * dbxread.c (aout_sym_fns): Ditto.
7521 (dbx_psymtab_to_symtab): Adjust call to symfile_relocate_debug_section.
7522 (elfstab_build_psymtabs): Ditto.
7524 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
7526 * defs.h (MAX_REGISTER_SIZE): Increase to 32.
7528 2010-02-02 Tom Tromey <tromey@redhat.com>
7530 * valops.c (value_cast_structs): Try downcasting using the RTTI
7533 2010-02-02 Tom Tromey <tromey@redhat.com>
7535 * gnu-v2-abi.c: Don't include gnu-v2-abi.h.
7536 (gnuv2_baseclass_offset): Now static.
7537 * Makefile.in (HFILES_NO_SRCDIR): Remove gnu-v2-abi.h.
7538 * gnu-v2-abi.h: Remove.
7540 2010-02-02 Tom Tromey <tromey@redhat.com>
7542 * m2-typeprint.c (m2_record_fields): Don't use
7544 * gdbtypes.h (TYPE_DECLARED_CLASS): New macro.
7545 (struct main_type) <flag_declared_class>: New field.
7546 (struct cplus_struct_type) <declared_type>: Remove.
7547 <ntemplate_args>: Move earlier.
7548 (DECLARED_TYPE_CLASS, DECLARED_TYPE_UNION, DECLARED_TYPE_STRUCT)
7549 (DECLARED_TYPE_TEMPLATE): Remove.
7550 (TYPE_DECLARED_TYPE): Remove.
7551 * gdbtypes.c (lookup_union): Don't use TYPE_DECLARED_TYPE.
7552 * dwarf2read.c (read_structure_type): Set TYPE_DECLARED_CLASS.
7553 * c-typeprint.c (c_type_print_base): Use TYPE_DECLARED_CLASS, not
7556 2010-02-02 Tom Tromey <tromey@redhat.com>
7558 PR c++/11226, PR c++/9629, PR c++/9688, PR c++/8890:
7559 * valops.c (search_struct_field): Compute nbases after calling
7561 (check_field): Call CHECK_TYPEDEF.
7562 * cp-valprint.c (cp_print_value): Pass correct address to
7563 baseclass_offset. Fix check for virtual base past the end of the
7564 object. Don't offset address passed to cp_print_value_fields or
7565 apply_val_pretty_printer.
7566 (cp_print_value_fields): Fix call to val_print.
7567 (cp_print_value_fields_rtti): New function.
7568 * c-valprint.c (c_val_print): Use cp_print_value_fields_rtti.
7569 * p-valprint.c (pascal_object_print_value_fields): Fix call to
7571 * python/py-prettyprint.c (apply_val_pretty_printer): Add embedded
7573 * language.h (struct language_defn) <la_val_print>: Document.
7574 * c-lang.h (cp_print_value_fields_rtti): Declare.
7576 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7579 * linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New.
7580 (linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU].
7581 (linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New.
7583 2010-02-01 Michael Matz <matz@suse.de>
7584 Daniel Jacobowitz <dan@codesourcery.com>
7586 * i386-tdep.c (i386_frame_cache): Assume valid anonymous
7587 functions use a frame pointer.
7589 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
7591 * solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert
7592 by a conditional setting DYN_ADDR. Use DYN_ADDR.
7593 * config/djgpp/fnchange.lst: Add translations for
7594 symbol-without-target_section.exp and symbol-without-target_section.c.
7596 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7598 * gdbarch.sh: Set LANG and LC_ALL to C, not c.
7599 (remote_breakpoint_for_pc): Correct invalid_p check.
7600 * gdbarch.c: Regenerated.
7602 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7604 * arm-tdep.c (arm_find_mapping_symbol): New function, from
7606 (arm_pc_is_thumb): Use arm_find_mapping_symbol.
7607 (extend_buffer_earlier): New function.
7608 (MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
7609 (arm_adjust_breakpoint_address): New function.
7610 (arm_gdbarch_init): Register arm_adjust_breakpoint_address.
7612 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7614 * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)
7615 (arm_linux_thumb2_le_breakpoint): New constants.
7616 (arm_linux_init_abi): Set thumb2_breakpoint and
7617 thumb2_breakpoint_size.
7618 * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
7619 (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
7620 Implement support for single stepping through IT blocks if
7621 a 32-bit Thumb breakpoint instruction is available.
7622 (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
7623 is available, use it when needed.
7624 (arm_remote_breakpoint_from_pc): New function.
7625 (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
7626 * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
7627 comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
7629 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
7631 * arch-utils.c (default_remote_breakpoint_from_pc): New function.
7632 * arch-utils.h (default_remote_breakpoint_from_pc): Declare.
7633 * gdbarch.c, gdbarch.h: Regenerated.
7634 * gdbarch.sh (remote_breakpoint_from_pc): New architecture method.
7635 * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use
7636 gdbarch_remote_breakpoint_from_pc.
7638 2010-01-29 Daniel Jacobowitz <dan@codesourcery.com>
7640 * infrun.c (prepare_to_proceed): Handle other signals which might
7642 (handle_inferior_event): Move the check for unusual breakpoint
7645 2010-01-29 Paul Hilfinger <hilfinger@adacore.com>
7647 amd64 - function returning record with field straddling 2 registers.
7648 * amd64-tdep.c (amd_classify_aggregate): Handle the case of
7649 a record of length <= 16 in which a field straddles the two
7652 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7654 Implement return values on amd64-windows.
7655 * amd64-windows-tdep.c: #include gdbcore.h and regcache.h.
7656 (amd64_windows_return_value): New function.
7657 (amd64_windows_init_abi): Call set_gdbarch_return_value with
7658 amd64_windows_return_value.
7660 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7662 amd64-windows: 32 bytes allocated on stack by caller for integer
7663 parameter registers.
7664 * i386-tdep.h (struct gdbarch_tdep): Add new field
7665 integer_param_regs_saved_in_caller_frame.
7666 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
7667 tdep->integer_param_regs_saved_in_caller_frame to 1.
7668 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
7669 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
7671 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7673 amd64-windows: memory args passed by pointer during function calls.
7674 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
7675 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
7676 where tdep->memory_args_by_pointer is non-zero.
7677 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
7678 tdep->memory_args_by_pointer to 1.
7680 2010-01-29 Joel Brobecker <brobecker@adacore.com>
7682 amd64-windows: Integer parameters in function calls.
7683 * i386-tdep.h (enum amd64_reg_class): New, moved here from
7685 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
7686 call_dummy_integer_regs, and classify.
7687 * amd64-tdep.h (amd64_classify): Add declaration.
7688 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
7689 (amd64_reg_class): Delete, moved to i386-tdep.h.
7690 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
7691 Replace call to amd64_classify by call to tdep->classify.
7692 (amd64_push_arguments): Get the list of registers to use for
7693 passing integer parameters from the gdbarch tdep structure,
7694 rather than using a hardcoded one. Replace calls to amd64_classify
7695 by calls to tdep->classify.
7696 (amd64_push_dummy_call): Get the register number used for
7697 the "hidden" argument from tdep->call_dummy_integer_regs.
7698 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
7699 and tdep->call_dummy_integer_regs. Set tdep->classify.
7700 * amd64-windows-tdep.c: Add include of gdbtypes.h.
7701 (amd64_windows_dummy_call_integer_regs): New static global.
7702 (amd64_windows_classify): New function.
7703 (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs
7704 tdep->call_dummy_integer_regs and tdep->classify.
7706 2010-01-28 Daniel Jacobowitz <dan@codesourcery.com>
7708 * regcache.c (regcache_xmalloc): Add aspace argument. Use it
7709 for the new regcache. All callers updated.
7710 (regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
7711 (get_thread_arch_regcache): Do not set aspace here.
7712 * regcache.h (regcache_xmalloc): Update declaration.
7714 * frame.c, infcall.c, ppc-linux-tdep.c: Calls to
7715 regcache_xmalloc updated.
7717 2010-01-28 Joel Brobecker <brobecker@adacore.com>
7719 Another -Wunused-function error in procfs.c (sparc-solaris)
7720 * procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
7721 Only define if SYS_syssgi is defined.
7722 (remove_dbx_link_breakpoint): Delete declaration. Move up.
7723 (dbx_link_addr, insert_dbx_link_bpt_in_file)
7724 (insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
7727 2010-01-27 Christopher Faylor <me+cygwin@cgf.cx>
7729 * windows-nat.c (windows_initialization_done): New variable.
7730 (get_windows_debug_event): Issue error when process dies before
7731 completely initializing.
7732 (do_initial_windows_stuff): Set flag to indicate when we are done with
7733 the initial steps of attaching to the child.
7735 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7737 * symtab.h (struct symbol <symtab>): New comment on NULL values.
7739 2010-01-27 Doug Evans <dje@google.com>
7741 * solib-svr4.c (solib_break_names): Add __dl_rtld_db_dlactivity.
7743 * breakpoint.c (bpstat_stop_status): Delete useless code.
7745 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7747 * printcmd.c (display_uses_solib_p): Remove variable section. Access
7748 objfile via SYMBOL_SYMTAB.
7750 2010-01-26 Tom Tromey <tromey@redhat.com>
7753 * eval.c (evaluate_subexp_for_address) <UNOP_IND>: Call
7754 coerce_array on result.
7756 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
7758 * cp-namespace.c (cp_lookup_symbol_namespace): Added
7759 search_parent argument.
7760 (cp_add_using): Initialize 'searched' field.
7761 (reset_directive_searched): New function.
7762 * cp-support.h: Add 'searched' field to using_direct struct.
7763 (cp_lookup_symbol_imports): Ditto.
7764 * cp-namespace.c (cp_lookup_symbol_imports): Ditto.
7765 Perform recursive search.
7766 Implement non parent search.
7767 * valops.c (value_maybe_namespace_elt): Updated.
7769 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
7772 * dwarf2read.c (read_lexical_block_scope): Create blocks for
7773 scopes which contain using directives even if they contain no
7775 * symtab.c (lookup_symbol_aux): Pass lowest level block to
7776 la_lookup_symbol_nonlocal.
7777 * cp-namespace.c (cp_lookup_symbol_nonlocal): call
7778 cp_lookup_symbol_namespace.
7779 (cp_lookup_symbol_namespace): Perform an import lookup at every
7781 (cp_lookup_symbol_imports): New function.
7782 (cp_lookup_symbol_in_namespace): New function.
7784 2010-01-25 Tom Tromey <tromey@redhat.com>
7787 * c-valprint.c (c_val_print): Fix test of extract_unsigned_integer
7790 2010-01-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
7792 * configure.ac: Only use host_os part when disabling TUI on osf.
7793 Use test to check variables, prefix strings with x.
7794 * configure: Regenerate.
7796 * solib-osf.c (osf_current_sos): Initialize tail.
7798 2010-01-25 gingold <gingold@adacore.com>
7800 * windows-nat.c (windows_continue): Use %x to print thread id.
7801 (get_windows_debug_event): Ditto.
7803 2010-01-22 Tom Tromey <tromey@redhat.com>
7806 * dwarf2read.c (quirk_gcc_member_function_pointer): Change return
7807 type and arguments. Use smash_to_methodptr_type.
7808 (read_structure_type): Call quirk_gcc_member_function_pointer
7810 * gdbtypes.h (smash_to_methodptr_type): Declare.
7811 * gdbtypes.c (smash_to_methodptr_type): New function.
7812 (lookup_methodptr_type): Use it.
7814 2010-01-21 Tom Tromey <tromey@redhat.com>
7817 * symtab.h (lookup_minimal_symbol_and_objfile): Declare.
7818 * minsyms.c (lookup_minimal_symbol_and_objfile): New function.
7819 * glibc-tdep.c (find_minsym_and_objfile): Remove.
7820 (glibc_skip_solib_resolver): Use
7821 lookup_minimal_symbol_and_objfile.
7823 2010-01-21 Kai Tietz <kai.tietz@onevision.com>
7825 * inflow.c (check_syscall): Guard by #if clause for GO32 and
7828 2010-01-20 Tom Tromey <tromey@redhat.com>
7831 * valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
7832 BINOP_GEQ. Handle BINOP_NOTEQUAL in the signed case.
7833 * dwarf2expr.c (new_dwarf_expr_context): Allocate
7834 dwarf_stack_values, not CORE_ADDRs.
7835 (execute_stack_op): Change DW_OP_div and comparison operators to
7836 use signed operands.
7838 2010-01-20 Vladimir Prus <vladimir@codesourcery.com>
7840 Per-inferior args and tty and environment.
7842 * infcmd.c (inferior_args): Rename to ...
7843 (inferior_args_scratch): ... this.
7844 (inferior_io_terminal): Rename to ...
7845 (inferior_io_terminal_scratch): ... this.
7846 (inferior_argc, inferior_argv): Remove.
7847 (set_inferior_io_terminal, get_inferior_io_terminal): Store
7848 inside current_inferior().
7849 (set_inferior_tty_command, show_inferior_tty_command): New.
7850 (get_inferior_args, set_inferior_args): Store inside
7852 (notice_args_set): Likewise and rename to...
7853 (set_args_command): ... this.
7854 (set_inferior_args_vector): Likewise.
7855 (notice_args_read): Rename to...
7856 (show_args_command): ...new.
7857 (tty_command): Remove.
7858 (run_command_1): Don't free old args, as they are freed by
7859 set_inferior_arg now.
7860 (run_no_args_command): Likewise.
7861 (inferior_environ): Remove.
7862 (run_command_1): Use environment of the current inferior.
7863 (environment_info, set_environment_command)
7864 (unset_environment_command, path_info, path_command): Likewise.
7865 (_initialize_infcmd): Adjust for function and variable renames.
7866 Do not init inferior_environ.
7867 * inferior.h (set_inferior_arg): Adjust prototype.
7868 (struct inferior): New fields args, argc, argv, terminal, environment.
7869 (inferior_environ): Remove declaration.
7870 * inferior.c (free_inferior): Free new fields.
7871 (add_inferior_silent): Initialize 'environment' field.
7872 * main.c (captured_main): Set arguments only after the initial
7873 inferior has been created. Set set_inferior_io_terminal,
7875 * mi/mi-main.c (mi_cmd_env_path): Use environment of the current
7877 (_initialize_mi_cmd_env): Adjust for disappearance of global
7879 * solib.c (solib_find): Use environment of the current inferior.
7881 2010-01-20 Jan Kratochvil <jan.kratochvil@redhat.com>
7883 * varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
7885 (instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.
7887 2010-01-20 Joel Brobecker <brobecker@adacore.com>
7889 Get rid of ada-lang.c:function_name_from_pc.
7890 * ada-lang.c: Add "stack.h" #include.
7891 (function_name_from_pc): Delete.
7892 (is_known_support_routine): Replace call to function_name_from_pc
7893 by call to find_frame_funname.
7894 (ada_unhandled_exception_name_addr_from_raise): Likewise.
7896 2010-01-19 Tom Tromey <tromey@redhat.com>
7899 * dwarf2read.c (read_partial_die): Allocate partial DIE's name on
7902 2010-01-19 Tom Tromey <tromey@redhat.com>
7904 * top.c (stop_sig, float_handler, do_nothing): Remove.
7906 2010-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
7908 * breakpoint.c (watchpoint_check): Check the call
7909 gdbarch_in_function_epilogue_p before calling frame_find_by_id.
7911 * config/djgpp/fnchange.lst: Add translations for
7912 watchpoint-cond-gone.exp, watchpoint-cond-gone.c and
7913 watchpoint-cond-gone-stripped.c.
7915 2010-01-19 Tom Tromey <tromey@redhat.com>
7918 * dwarf2read.c (partial_die_parent_scope): Put enumeration type
7919 into parent scope, and enumerator into grandparent scope.
7921 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7923 * NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands.
7925 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7927 * configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of
7928 i[34567]86-*-solaris2.1[0-9]*.
7929 * configure.tgt: Likewise.
7931 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7933 * NEWS: Document the source command enhancement allowing it
7934 to load Python scripts. Document the "set/show script-extension"
7937 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7939 Add -Wunused-function to compile flags.
7940 * configure.ac: Add -Wunused-function to build_warnings.
7941 * configure: Regenerate.
7943 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7945 "delete" ada-lex.c:input function, not used.
7946 * ada-lex.l: #define YY_NO_INPUT.
7948 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7950 Delete free_named_symtabs and associated cleanup.
7951 * symfile.h (free_named_symtabs): Delete declaration.
7952 * symfile.c: Remove some commented out code (clear_symtab_users_once).
7953 (cashier_psymtab): Comment function out.
7955 (free_named_symtabs): Delete.
7956 * coffread.c (coff_end_symtab): Remove call to free_named_symtabs.
7957 * dbxread.c (end_psymtab): Likewise.
7958 * dwarf2read.c (process_psymtab_comp_unit): Ditto.
7959 * exec.c (exec_close_1): Ditto.
7960 * xcoffread.c (xcoff_end_psymtab): Likewise.
7962 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7964 * stack.c (print_block_frame_labels): Comment function out.
7966 2010-01-19 Joel Brobecker <brobecker@adacore.com>
7968 Delete unused or undefined functions.
7969 * breakpoint.c (ep_parse_optional_filename): Delete.
7970 * dcache.c (dcache_write_line): Remove declaration.
7971 * infrun.c (build_infrun): Remove declaration.
7972 * tracepoint.c (tracepoint_save_command): Remove declaration.
7973 * linux-nat.c (init_lwp_list): Delete. No longer used.
7974 * event-loop.c (check_async_signal_handlers): Delete declaration.
7975 * infrun.c (init_execution_control_state): Delete.
7976 (proceed): Update comment to avoid mentioning
7977 init_execution_control_state.
7978 * target.c (kill_or_be_killed, nosupport_runtime): Delete.
7979 * ada-lang.c (ada_to_static_fixed_value): Delete.
7980 * scm-lang.c (evaluate_subexp_scm): Delete declaration.
7981 * cp-namespace.c (cp_copy_usings): Delete.
7982 * xml-syscall.c (xml_number_of_syscalls): Delete.
7983 * progspace.c (find_program_space_by_num): Delete.
7984 * inflow.c (handle_sigio): Delete declaration.
7985 * hppa-tdep.c (hppa_alignof): Delete.
7986 * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
7987 (mipsnbsd_core_osabi_sniffer): Delete.
7989 2010-01-18 Tom Tromey <tromey@redhat.com>
7992 * c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST)
7993 (CONST_CAST): New tokens.
7994 (exp): Add new productions.
7995 (ident_tokens): Add const_cast, dynamic_cast, static_cast, and
7997 (is_cast_operator): New function.
7998 (yylex): Handle cast operators specially.
7999 * eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST,
8000 UNOP_REINTERPRET_CAST>: New cases.
8001 * expprint.c (print_subexp_standard): Likewise.
8002 (op_name_standard): Likewise.
8003 (dump_subexp_body_standard): Likewise.
8004 * parse.c (operator_length_standard): Likewise.
8005 * expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST,
8006 UNOP_REINTERPRET_CAST.
8007 * gdbtypes.c (class_types_same_p): New function.
8008 (is_ancestor): Use it.
8009 (is_public_ancestor): New function.
8010 (is_unique_ancestor_worker): Likewise.
8011 (is_unique_ancestor): Likewise.
8012 * gdbtypes.h (class_types_same_p, is_public_ancestor)
8013 (is_unique_ancestor): Declare.
8014 * valops.c (value_reinterpret_cast): New function.
8015 (dynamic_cast_check_1): Likewise.
8016 (dynamic_cast_check_2): Likewise.
8017 (value_dynamic_cast): Likewise.
8018 * value.h (value_reinterpret_cast, value_dynamic_cast): Declare.
8020 2010-01-18 Joel Brobecker <brobecker@adacore.com>
8022 Fix build failure when building without Python support.
8023 * python/python.c: Always include exceptions.h, even when HAVE_PYTHON
8026 2010-01-18 Joel Brobecker <brobecker@adacore.com>
8028 Use XVS field type instead of doing a parallel lookup.
8029 * ada-lang.c (ada_get_base_type): Follow the XVS field type
8030 if it is a reference type instead of doing a type lookup using
8033 2010-01-18 Joel Brobecker <brobecker@adacore.com>
8035 Trust PAD types instead of using PAD___XVS.
8036 * ada-lang.c (trust_pad_over_xvs): New static variable.
8037 (ada_is_aligner_type): If !trust_pad_over_xvs and there is a
8038 parallel XVS type, follow the XVS type instead of the PAD type.
8039 (unwrap_value): Make sure that there is no parallel XVE type
8040 before returning the value as is.
8041 (set_ada_list, show_ada_list): New static variables.
8042 (set_ada_command, show_ada_command): New functions.
8043 (_initialize_ada_language): Add new "set/show ada" prefix commands.
8044 Add new "set/show ada trust-PAD-over-XVS" setting.
8046 2010-01-18 Tom Tromey <tromey@redhat.com>
8047 Thiago Jung Bauermann <bauerman@br.ibm.com>
8049 Allow "source" to load python scripts.
8050 * exceptions.h (enum errors): Add UNSUPPORTED_ERROR.
8051 * python/python.c (source_python_script): New function.
8052 * python/python.h (source_python_script): Add declaration.
8053 * cli/cli-cmds.c: #include exceptions.h and python/python.h.
8054 (script_ext_off, script_ext_soft, script_ext_strict)
8055 (script_ext_enums, script_ext_mode): New static constants.
8056 (show_script_ext_mode, find_and_open_script): New functions.
8057 (source_script): Enhance to handle Python scripts.
8058 (init_cli_cmds): Add set/show script-extension commands.
8060 2010-01-16 Stan Shebs <stan@codesourcery.com>
8062 * tracepoint.h (struct trace_status): Use unsigned long long
8064 * tracepoint.c (trace_status_command): Fix printf directive.
8065 (trace_save_command): Check fwrite returns, fix printf directive.
8066 (trace_filename): New global.
8067 (tfile_open): Set it, check read returns.
8068 (tfile_close): Free trace_filename.
8069 (tfile_get_traceframe_address): Check read returns.
8070 (tfile_trace_find): Ditto.
8071 (tfile_fetch_registers): Ditto.
8072 (tfile_xfer_partial): Ditto.
8073 (tfile_get_trace_state_variable_value): Ditto.
8075 2010-01-15 Stan Shebs <stan@codesourcery.com>
8077 Add trace file support.
8078 * tracepoint.h (enum trace_stop_reason): New enum.
8079 (struct trace_status): New struct.
8080 (parse_trace_status): Declare.
8081 (struct uploaded_tp): Move here from remote.c,
8082 add fields for actions.
8083 (struct uploaded_tsv): New struct.
8084 * tracepoint.c (tfile_ops): New target vector.
8085 (trace_fd): New global.
8086 (tfile_open): New function.
8087 (tfile_close): New function.
8088 (tfile_files_info): New function.
8089 (tfile_get_trace_status): New function.
8090 (tfile_get_traceframe_address): New function.
8091 (tfile_trace_find): New function.
8092 (tfile_fetch_registers): New function.
8093 (tfile_xfer_partial): New function.
8094 (tfile_get_trace_state_variable_value): New function.
8095 (init_tfile_ops): New function.
8096 (_initialize_tracepoint): Call it, add tfile target.
8097 (trace_status): New global.
8098 (current_trace_status): New function.
8099 (trace_running_p): Remove, change all users to get from
8100 current_trace_status()->running.
8101 (get_trace_status): Remove.
8102 (trace_status_command): Call target_get_trace_status directly,
8103 report more detail including tracing stop reasons.
8104 (trace_find_command): Always allow tfind on a file.
8105 (trace_find_pc_command): Ditto.
8106 (trace_find_tracepoint_command): Ditto.
8107 (trace_find_line_command): Ditto.
8108 (trace_find_range_command): Ditto.
8109 (trace_find_outside_command): Ditto.
8110 (trace_frames_offset, cur_offset): Declare as off_t.
8111 (trace_regblock_size): Rename from reg_size, update users.
8112 (parse_trace_status): New function.
8113 (tfile_interp_line): New function.
8114 (disconnect_or_stop_tracing): Ensure current trace
8115 status before asking what to do.
8116 (stop_reason_names): New global.
8117 (trace_save_command): New command.
8118 (get_uploaded_tp): Move here from remote.c.
8119 (find_matching_tracepoint): Ditto.
8120 (merge_uploaded_tracepoints): New function.
8121 (parse_trace_status): Use stop_reason_names.
8122 (_initialize_tracepoint): Define tsave command.
8123 * target.h (target_ops): New fields to_save_trace_data,
8124 to_upload_tracepoints, to_upload_trace_state_variables,
8125 to_get_raw_trace_data, change to_get_trace_status
8126 to take a pointer to a status struct.
8127 (target_save_trace_data): New macro.
8128 (target_upload_tracepoints): New macro.
8129 (target_upload_trace_state_variables): New macro.
8130 (target_get_raw_trace_data): New macro.
8131 * target.c (update_current_target): Add new methods, change
8132 signature of to_get_trace_status.
8133 * remote.c (hex2bin): Make globally visible.
8135 (remote_download_trace_state_variable): Download name also.
8136 (remote_get_trace_status): Update parameter, use
8138 (remote_save_trace_data): New function.
8139 (remote_upload_tracepoints): New function.
8140 (remote_upload_trace_state_variables): New function.
8141 (remote_get_raw_trace_data): New function.
8142 (remote_start_remote): Use them.
8143 (_initialize_remote_ops): Add operations.
8144 * ax-gdb.c: Include breakpoint.h.
8145 * breakpoint.c (create_tracepoint_from_upload): Use
8146 break_command_really, return tracepoint, warn about unimplemented
8148 * NEWS: Mention trace file addition.
8150 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8152 Fix compilation warning on gcc-3.4.
8153 * exec.c (print_section_info): Move the `displacement' variable
8154 initialization to its declaration.
8156 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8158 * gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE
8161 2010-01-15 Eric Botcazou <botcazou@adacore.com>
8163 "info tasks" broken by typedefs in ATCB type definitions.
8164 * ada-lang.c (ada_template_to_fixed_record_type_1): Add call to
8165 ada_check_typedef before retrieving the length of the type for
8168 2010-01-15 Joel Brobecker <brobecker@adacore.com>
8170 Do not use name-based lookup for unconstrained packed arrays.
8171 * ada-lang.c (find_parallel_type_by_descriptive_type):
8172 Limit the fallback to name-based lookups to the case where
8173 the type is a constrained packed array.
8175 2010-01-15 Joel Brobecker <brobecker@adacore.com>
8177 Enhance gdb-gdb.py to handle main_type.type_specific.
8178 * gdb-gdb.py: Print the type-specific part of struct main_type.
8180 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8182 * configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
8183 * configure: Regenerate.
8184 * config.in: Regenerate.
8185 * utils.c: Include sys/resource.h.
8186 (dump_core, can_dump_core): New.
8187 (internal_vproblem): Update the comment. Check can_dump_core while
8188 setting dump_core_p. Replace two abort calls by dump_core calls.
8190 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8191 Eli Zaretskii <eliz@gnu.org>
8193 * NEWS: Document the PIE support.
8195 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8197 * linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h.
8198 (check_is_pie_binary, _initialize_linux_tdep): Remove.
8200 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8202 * solib-svr4.c (svr4_exec_displacement): New comment for entry_point.
8203 Replace exec_entry_point call by bfd_get_start_address.
8205 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8207 Support Valgrind attachments broken by the PIE support.
8208 * auxv.c: Include gdbcore.h.
8209 (procfs_xfer_auxv): Make static. Reduce its comment. Drop its
8210 parameters ops, object and annex. Remove their assertions.
8211 (ld_so_xfer_auxv, memory_xfer_auxv): New function.
8212 * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ...
8213 (memory_xfer_auxv): ... here.
8214 * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
8216 * procfs.c (procfs_xfer_partial): Likewise.
8217 * solib-svr4.c (svr4_relocate_main_executable): New prototype.
8218 (svr4_special_symbol_handling): Call svr4_relocate_main_executable.
8219 (svr4_solib_create_inferior_hook): Conditionalize the
8220 svr4_relocate_main_executable call.
8222 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8224 * solib-svr4.c (scan_dyntag): Remove variable dyn_addr. New variable
8225 target_section. Find SECT in current_target_sections, gdb_assert it.
8226 (elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
8228 * symtab.c (lookup_objfile_from_block): Return the binary file instead
8229 of separate debug info file.
8231 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8233 Support PIEs with no symfile_objfile.
8234 * exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
8235 * solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.
8237 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
8239 * solib-svr4.c (svr4_relocate_main_executable): Move the static exec
8241 (svr4_static_exec_displacement): ... a new function.
8242 (svr4_exec_displacement): New function.
8243 (svr4_relocate_main_executable): Call svr4_exec_displacement. Allocate
8244 new_offsets using alloca now. Remove variable old_chain and changed.
8245 Call objfile_relocate unconditionally now.
8247 2010-01-14 Doug Evans <dje@google.com>
8249 * gdbtypes.c (arch_flags_type): Fix comment.
8250 * gdbtypes.h (arch_composite_type): Fix comment.
8252 2009-01-14 Tristan Gingold <gingold@adacore.com>
8254 * machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
8255 Call xstrdup for abfd->filename. Pass symfile_flags and objfile flags
8256 to symbol_file_add_from_bfd. Add OSO as separate objfile.
8257 (macho_oso_symfile): Add symfile_flags parameter. Pass it to
8258 macho_add_oso_symfile.
8259 (macho_symfile_read): Pass symfile_flags to macho_oso_symfile.
8261 2010-01-14 Joel Brobecker <brobecker@adacore.com>
8263 Tru64: Dead threads are never deleted.
8264 * dec-thread.c (dec_thread_ptid_is_alive): New function.
8265 (dec_thread_count_gdb_threads): Fix counter increment.
8266 (dec_thread_add_gdb_thread): Fix *listp increment.
8267 (resync_thread_list): Fix bug in deletion of dead threads that
8268 caused all threads to be deleted, instead of just the dead ones.
8270 2010-01-13 Phil Muldoon <pmuldoon@redhat.com>
8274 * python/python-internal.h: Add lazy_string_object_type
8276 (create_lazy_string_object, gdbpy_initialize_lazy_string)
8277 (gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define.
8278 * python/py-value.c (valpy_lazy_string): New function.
8279 (convert_value_from_python): Add lazy string conversion.
8280 * python/py-prettyprint.c (pretty_print_one_value): Check if
8281 return is also a lazy string.
8282 (print_string_repr): Add lazy string printing branch.
8283 (print_children): Likewise.
8284 * python/py-lazy-string.c: New file. Implement lazy strings.
8285 * python/python.c (_initialize_python): Call
8286 gdbpy_initialize_lazy_string.
8287 * varobj.c (value_get_print_value): Add lazy string printing
8288 branch. Account for encoding.
8289 * c-lang.c (c_printstr): Account for new encoding argument. If
8290 encoding is NULL, find encoding suited for type, otherwise use
8292 * language.h (language_defn): Add encoding argument.
8293 (LA_PRINT_STRING): Likewise.
8294 * language.c (unk_lang_printstr): Update to reflect new encoding
8295 argument to language_defn.
8296 * ada-lang.h (ada_printstr): Likewise.
8297 * c-lang.h (c_printstr): Likewise.
8298 * p-lang.h (pascal_printstr);
8299 * f-lang.c (f_printstr): Likewise.
8300 * m2-lang.c (m2_printstr): Likewise.
8301 * objc-lang.c (objc_printstr): Likewise.
8302 * p-lang.c (pascal_printstr): Likewise.
8303 * scm-lang.c (scm_printstr): Likewise.
8304 * c-valprint.c (c_val_print): Update LA_PRINT_STRING call for
8306 * ada-valprint.c (ada_printstr): Likewise.
8307 * f-valprint.c (f_val_print): Likewise
8308 * m2-valprint.c (m2_val_print): Likewise.
8309 * p-valprint.c (pascal_val_print): Likewise.
8310 * expprint.c (print_subexp_standard): Likewise.
8311 * valprint.c (val_print_string): Likewise.
8312 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string.
8313 (SUBDIR_PYTHON_SRCS): Likewise.
8314 (py-lazy-string.o): New rule.
8316 2010-01-13 Doug Evans <dje@google.com>
8318 * mi/mi-main.c (list_available_thread_groups): Avoid "may be used
8319 uninitialized" warning from gcc on local `tree'.
8321 2010-01-13 Vladimir Prus <vladimir@codesourcery.com>
8323 Implement core awareness.
8325 * bcache.c (compare_ints): Remove
8326 (print_percentage): Use compare_positive_ints.
8327 * defs.h (compare_positive_ints): Declare.
8328 * linux-nat.h (struct lin_lwp): New field core.
8329 (linux_nat_core_of_thread_1): Declare.
8330 * linux-nat.c (add_lwp): Init the 'core' field.
8331 (linux_nat_wait_1): Record the core.
8332 (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New.
8333 (linux_nat_add_target): Register the above.
8334 * linux-thread-db.c (update_thread_core): New.
8335 (thread_db_find_new_threads): Update core information for
8337 * remote.c (struct private_thread_info): New.
8338 (free_private_thread_info, demand_private_info): New.
8339 (PACKET_qXfer_threads, use_osdata_threads): New.
8340 (struct thread_item, threads_parsing_context
8341 (start_thread, end_thread, thread_attributes)
8342 (thread_children, threads_children, threads_elements): New.
8343 (remote_threads_info): Try qXfer:threads before anything
8345 (remote_protocol_packets): Register qXfer:threads.
8346 (remote_open_1): Init use_osdata_threads.
8347 (struct stop_reply): New field 'core'.
8348 (remote_parse_stop_reply): Parse core number.
8349 (process_stop_reply): Record core number.
8350 (remote_xfer_partial): Handle qXfer:threads.
8351 (remote_core_of_thread): New.
8352 (init_remote_ops): Register remote_core_of_thread.
8353 (_initialize_remote): Register qXfer:read.
8354 * target.c (target_core_of_thread): New
8355 * target.h (enum target_object): New value TARGET_OBJECT_THREADS.
8356 (struct target_ops): New field to_core_of_threads.
8357 (target_core_of_thread): Declare.
8358 * gdbthread.h (struct thread_info): New field private_dtor.
8359 * thread.c (print_thread_info): Report the core.
8360 * ui-out.c (MAX_UI_OUT_LEVELS): Increase.
8361 * utils.c (compare_positive_ints): New.
8362 * features/threads.dtd: New.
8363 * mi/mi-interp.c (mi_on_normal_stop): Report the core.
8364 * mi/mi-main.c (struct collect_cores_data, collect_cores)
8365 (do_nothing, free_vector_of_osdata_items)
8366 (splay_tree_int_comparator, free_splay_tree): New.
8367 (print_one_inferior_data): Implemented printing of selected
8368 inferiors. Collect and print cores.
8369 (output_cores): New.
8370 (mi_cmd_list_thread_groups): Support --recurse. Permit specifying
8371 thread groups together with --available.
8373 2010-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
8375 * configure: Regenerate (for _STRUCTURED_PROC).
8377 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8379 Delete dead function.
8380 * ada-lang.c (extract_string): Delete. No longer used.
8382 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8384 Fix -Wunused warning in dec-thread.c.
8385 * dec-thread.c (dec_thread_count_gdb_threads)
8386 (dec_thread_add_gdb_thread): Prevent -Wunused warning.
8388 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8390 * ada-valprint.c (ada_print_floating): Remove trailing space.
8392 2010-01-12 Joel Brobecker <brobecker@adacore.com>
8394 Add support for DW_AT_GNAT_descriptive_type.
8395 * gdbtypes.h (enum type_specific_kind): New enum.
8396 (struct main_type) [type_specific_field]: New component.
8397 [type_specific]: Add new component "gnat_stuff".
8398 (struct gnat_aux_type): New type.
8399 (INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
8400 (HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
8401 (gnat_aux_default, allocate_gnat_aux_type): Add declaration.
8402 (INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
8403 (TYPE_SPECIFIC_FIELD): New macros.
8404 (TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
8405 type does not hold any cplus-specific data.
8406 (TYPE_RAW_CPLUS_SPECIFIC): New macro.
8407 (TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
8408 (TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
8409 cplus-specific data.
8410 * gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
8411 Set new component TYPE_SPECIFIC_FIELD (type).
8412 (gnat_aux_default): New constant.
8413 (allocate_gnat_aux_type): New function.
8414 (init_type): Add initialization the type-specific stuff for
8415 TYPE_CODE_FLT and TYPE_CODE_FUNC types.
8416 (print_gnat_stuff): New function.
8417 (recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
8418 specific data. Adjust code that prints the contents of the
8419 type-specific union using the TYPE_SPECIFIC_FIELD value.
8420 * dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
8421 the type cplus stuff for Ada types.
8422 (dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
8423 Error out if these routines are called with an Ada type.
8424 (read_structure_type, read_array_type, read_subrange_type):
8425 Add call to set_descriptive_type.
8426 (set_die_type): Initialize the gnat-specific data if necessary.
8427 (need_gnat_info, die_descriptive_type, set_descriptive_type):
8429 * ada-lang.c (decode_constrained_packed_array_type): Use
8430 decode_constrained_packed_array_type instead of doing a standard
8431 lookup to locate a parallel type.
8432 (find_parallel_type_by_descriptive_type): New function.
8433 (ada_find_parallel_type_with_name): New function.
8434 (ada_find_parallel_type): Reimplement using
8435 ada_find_parallel_type_with_name.
8436 * ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
8437 to check if type has a cplus stuff.
8438 * linespec.c (total_number_of_methods): Likewise.
8439 * mdebugread.c (new_type): Likewise.
8441 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8443 * NEWS: Document the 0b binary number prefix parsing.
8445 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8447 * objfiles.c (objfile_relocate1): Change the return type to int.
8448 Describe the new return value. Return non-zero if data changed.
8449 (objfile_relocate): New variable changed. Set it. Call
8450 breakpoint_re_set depending on CHANGED.
8452 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8454 Implement binary numbers parsing.
8455 * c-exp.y (parse_number): New case 'b' and 'B'.
8457 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8458 Tristan Gingold <gingold@adacore.com>
8460 * solib.c (info_sharedlibrary_command): Replace
8461 objfile_has_partial_symbols and objfile_has_full_symbols calls by
8462 objfile_has_symbols.
8464 2010-01-10 Joel Brobecker <brobecker@adacore.com>
8466 * NEWS: Document the improvements made to the mips-irix port.
8468 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8470 Fix the documentation of valprint.c:value_print.
8471 * valprint.c (value_print): Update the function description to
8472 mention that the syntax of the output follows the current_language,
8475 2010-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
8477 Fix displacement of separate debug info files.
8478 * objfiles.c (objfile_relocate): Rename to ...
8479 (objfile_relocate1): ... here and make it static. Extend the comment.
8480 (objfile_relocate): New function.
8481 * solib-spu.c (spu_relocate_main_executable): Explicitly check if
8482 SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain.
8483 Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now
8484 allocated using alloca.
8485 * symfile.c (copy_section_addr_info): Remove.
8486 (build_section_addr_info_from_objfile): Make it global. New variables
8487 addr_bit and mask, use them.
8488 * symfile.h (build_section_addr_info_from_objfile): New prototype.
8489 (copy_section_addr_info): Remove.
8491 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8493 Signal unwinder for mips-irix N32.
8494 * mips-irix-tdep.c: #include mips-tdep.h, trad-frame.h, and
8496 (SIGTRAMP_FRAME_SIZE, SIGCONTEXT_PC_OFF, SIGCONTEXT_REGS_OFF)
8497 (SIGCONTEXT_FPREGS_OFF, SIGCONTEXT_FPCSR_OFF, SIGCONTEXT_HI_OFF)
8498 (SIGCONTEXT_LO_OFF): New macros.
8499 (mips_irix_n32_tramp_frame_init): New function.
8500 (mips_irix_n32_tramp_frame): New static constant.
8501 (mips_irix_init_abi): Prepend the mips_irix_n32_tramp_frame unwinder.
8503 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8505 Breakpoint in shared library does not work on mips-irix.
8506 * procfs.c: #include "observer.h".
8507 (procfs_inferior_created): New function, moving here the code
8508 which unsets the syssgi syscall-exit notifications.
8509 (procfs_create_inferior): Remove the code which unsets the syssgi
8510 syscall-exit notifications. It is too early to do this here.
8511 (_initialize_procfs): Attach the procfs_inferior_created observer.
8513 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8515 Wrong return convention for arrays (mips-irix).
8516 * mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
8517 128 bits or smaller are returned the same way as structs
8518 and unions of the the same size.
8520 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8522 Cannot set the PC on mips-irix.
8523 * irix5-nat.c (fill_gregset): Check regno against the raw PC
8524 register number, no the cooked one.
8526 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8528 Error while loading core file on mips-irix.
8529 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing
8530 if debugging from a core file.
8532 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8534 GDB hangs when attaching to process on mips-irix.
8535 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing if
8536 attaching to a process.
8538 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8540 Use the correct breakpoint instruction on mips-irix.
8541 * mips-tdep.c (mips_breakpoint_from_pc): Add new static variable
8542 containing the correct breakpoint instruction to use on mips-irix.
8543 Use it when the osabi is GDB_OSABI_IRIX.
8545 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8547 -Wunused warning in procfs.c (mips-irix only).
8548 * procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
8549 throughout instead of using praddset and prdelset respectively.
8551 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8553 GDB crash while stepping into function.
8554 * infrun.c (handle_inferior_event): Refetch the current frame
8555 after handling what.main_action, in case that pointer became
8558 2010-01-09 Joel Brobecker <brobecker@adacore.com>
8560 Fix build failure of solaris-hosted cross debuggers.
8561 * ada-valprint.c, parse.c: Include defs.h before including ctype.h.
8563 2010-01-09 Daniel Gutson <dgutson@codesourcery.com>
8565 Fix build failure on sparc-solaris.
8566 * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus.
8568 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
8570 Move some symfile code into subroutines.
8571 * symfile.h (relative_addr_info_to_section_offsets)
8572 (addr_info_make_relative): New prototypes.
8573 * symfile.c (default_symfile_offsets): Move a part to ...
8574 (relative_addr_info_to_section_offsets): ... this new function.
8575 (default_symfile_offsets): Call it.
8576 (syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
8578 (addr_info_make_relative): ... this new function.
8580 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
8582 Add from_tty to solib_create_inferior_hook.
8583 * infcmd.c (post_create_inferior): Move solib_add after
8584 solib_create_inferior_hook. Pass from_tty to
8585 solib_create_inferior_hook. Call solib_add and SOLIB_ADD with
8586 0 from_tty and comment why.
8587 * infrun.c (follow_exec): Pass from_tty solib_create_inferior_hook as 0.
8588 * linux-nat.c (linux_child_follow_fork): Likewise.
8589 * nto-procfs.c (procfs_post_attach, procfs_create_inferior): Likewise.
8590 * solib-darwin.c (darwin_solib_create_inferior_hook): New parameter
8592 * solib-frv.c (frv_solib_create_inferior_hook): Likewise.
8593 * solib-irix.c (irix_solib_create_inferior_hook): Likewise.
8594 * solib-null.c (null_solib_create_inferior_hook): Likewise.
8595 * solib-osf.c (osf_solib_create_inferior_hook): Likewise.
8596 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
8597 * solib-som.c (som_solib_create_inferior_hook): Likewise.
8598 * solib-spu.c (spu_solib_create_inferior_hook): New parameter from_tty.
8599 Pass it to svr4_so_ops.solib_create_inferior_hook.
8600 * solib-sunos.c (sunos_solib_create_inferior_hook): New parameter
8602 * solib-svr4.c (enable_break): New parameter from_tty. Pass it to
8604 (svr4_solib_create_inferior_hook): New parameter from_tty. Pass it to
8606 * solib-target.c (solib_target_solib_create_inferior_hook): New
8608 * solib.c (solib_create_inferior_hook): New parameter from_tty. Pass
8609 it to ops->solib_create_inferior_hook.
8610 (reload_shared_libraries): Pass from_tty to solib_create_inferior_hook.
8611 Move solib_add after solib_create_inferior_hook, call it now with
8612 from_tty as 0. New comment there.
8613 * solib.h (solib_create_inferior_hook): New parameter from_tty.
8614 * solist.h (struct target_so_ops <solib_create_inferior_hook>):
8617 2010-01-08 Vladimir Prus <vladimir@codesourcery.com>
8620 * infrun.c (handle_inferior_event): Use get_thread_regcache
8621 with events ptid, not get_current_regcache.
8623 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8625 GDB crash with empty executable name (MinGW).
8626 * source.c (openp): Add assert that parameter string is not NULL.
8627 if parameter string is an empty string, then return with a failure
8630 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8632 Get rid of support for VAX Floats.
8633 * ada-lang.h (ada_is_vax_floating_type, ada_vax_float_type_suffix)
8634 (ada_vax_float_print_function): Delete.
8635 * ada-lang.c (ada_is_vax_floating_type, ada_vax_float_type_suffix)
8636 (ada_vax_float_print_function): Delete.
8637 * ada-typeprint.c (print_vax_floating_point_type): Delete.
8638 (ada_print_type): Remove support for VAX floats.
8639 * ada-valprint.c (ada_val_print_1): Remove support for VAX floats.
8641 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
8643 * stabsread.c (read_args): Handle zero arguments.
8645 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8647 Cannot find in-tree libiconv.a after reconfigure.
8648 * acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a
8649 that we can use, then cache the path to this archive.
8650 * configure: Regenerate.
8652 2010-01-07 Stan Shebs <stan@codesourcery.com>
8654 Make tracepoint operations go through target vector.
8655 * target.h (enum trace_find_type): New enum.
8656 (struct target_ops): New fields to_trace_init,
8657 to_download_tracepoint, to_download_trace_state_variable,
8658 to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
8659 to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
8660 to_set_disconnected_tracing.
8661 (target_trace_init): New macro.
8662 (target_download_tracepoint): New macro.
8663 (target_download_trace_state_variable): New macro.
8664 (target_trace_start): New macro.
8665 (target_trace_set_readonly_regions): New macro.
8666 (target_get_trace_status): New macro.
8667 (target_trace_stop): New macro.
8668 (target_trace_find): New macro.
8669 (target_get_trace_state_variable_value): New macro.
8670 (target_set_disconnected_tracing): New macro.
8671 * target.c (update_current_target): Inherit and set defaults for
8672 tracepoint operations.
8673 * tracepoint.c (default_collect): Make globally visible.
8674 (target_is_remote): Remove, along with all calls.
8675 (tvariables_info): Call target_get_trace_state_variable_value.
8676 (remote_set_transparent_ranges): Remove.
8677 (trace_start_command): Call target_trace_init,
8678 target_download_tracepoint, etc.
8679 (download_tracepoint): Remove.
8680 (trace_stop_command): Simplify.
8681 (stop_tracing): Call target_trace_stop.
8682 (get_trace_status): Call target_get_trace_status.
8683 (trace_status_command): Add case for targets that cannot trace.
8684 (finish_tfind_command): Change to take numerical arguments, call
8686 (trace_find_command): Update call to finish_tfind_command.
8687 (trace_find_pc_command): Ditto.
8688 (trace_find_tracepoint_command): Ditto.
8689 (trace_find_line_command): Ditto.
8690 (trace_find_range_command): Ditto.
8691 (trace_find_outside_command): Ditto.
8692 (set_disconnected_tracing_value): Call
8693 target_set_disconnected_tracing.
8694 * remote.c: Add protocol encoding bits from tracepoint.c.
8695 (trace_error): Move from tracepoint.c.
8696 (remote_get_noisy_reply): Ditto.
8697 (free_actions_list_cleanup_wrapper): Ditto.
8698 (free_actions_list): Ditto.
8699 (remote_trace_init): New function.
8700 (remote_download_tracepoint): New function.
8701 (remote_download_trace_state_variable): New function.
8702 (remote_trace_set_readonly_regions): New function.
8703 (remote_trace_start): New function.
8704 (remote_get_trace_status): New function.
8705 (remote_trace_stop): New function.
8706 (remote_trace_find): New function.
8707 (remote_download_trace_state_variable): New function.
8708 (remote_set_disconnected_tracing): New function.
8709 (init_remote_ops): Add tracepoint operations.
8711 * tracepoint.c (trace_dump_command): Don't decr_pc_after_break.
8713 2010-01-07 Tristan Gingold <gingold@adacore.com>
8715 * symfile.c (build_section_addr_info_from_objfile): New function.
8716 (symbol_file_add_separate): Don't use offsets from objfile but
8719 2010-01-06 Stan Shebs <stan@codesourcery.com>
8721 Support disconnected tracing.
8722 * infcmd.c (detach_command): Ask whether to stop tracing.
8723 * cli/cli-cmds.c (quit_command): Ditto.
8724 * breakpoint.h (struct breakpoint): New field number_on_target.
8725 * breakpoint.c (create_tracepoint_from_upload): New function.
8726 (get_tracepoint_by_number_on_target): New function.
8727 * remote.c (struct remote): New field disconnected_tracing.
8728 (remote_disconnected_tracing_feature): New function.
8729 (remote_protocol_features): Add DisconnectedTracing.
8730 (struct uploaded_tp): New struct.
8731 (uploaded_tps): New global.
8732 (get_uploaded_tp): New function.
8733 (find_matching_tracepoint): New function.
8734 (remote_get_tracing_state): New function.
8735 (remote_start_remote): Call it.
8736 * tracepoint.c (disconnected_tracing): New global.
8737 (trace_start_command): Initialize number_on_target.
8738 (stop_tracing): New function, split out from...
8739 (trace_stop_command): Call stop_tracing.
8740 (get_trace_status): New function, split out from...
8741 (trace_status_command): Call get_trace_status, add info on
8742 disconnection behavior.
8743 (disconnect_or_stop_tracing): New function.
8744 (finish_tfind_command): Translate from number on target.
8745 (trace_find_tracepoint_command): Translate to number on target.
8746 (send_disconnected_tracing_value): New function.
8747 (set_disconnected_tracing): New function.
8748 (_initialize_tracepoint): Add disconnected-tracing variable.
8749 * NEWS: Mention disconnected tracing.
8751 2010-01-06 Tristan Gingold <gingold@adacore.com>
8753 * symtab.c (lookup_global_symbol_from_objfile): Rename objfile
8754 parameter to main_objfile. Iterate on all separate debug objfiles.
8755 * symfile.h (symbol_file_add_separate)
8756 (find_separate_debug_file_by_debuglink): Remove parameter names.
8757 * symfile.c (symbol_file_add_separate): Use add_separate_objfile.
8758 (reread_symbols): Use free_objfile_separate_debug.
8759 * objfiles.h (struct objfile): Add separate_debug_objfile_link.
8761 (objfile_separate_debug_iterate, add_separate_debug_objfile)
8762 (free_objfile_separate_debug): New prototypes.
8763 * objfiles.c (objfile_separate_debug_iterate): New function.
8764 (add_separate_debug_objfile, free_objfile_separate_debug): New
8766 (free_objfile): Use free_objfile_separate_debug. Adjust for
8767 multiple separate debug objfile.
8768 (objfile_has_symbols): Adjust comment. Iterate on all separate
8770 * minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
8772 (lookup_minimal_symbol_text): Ditto.
8773 (lookup_minimal_symbol_by_pc_name): Ditto.
8774 (lookup_minimal_symbol_solib_trampoline): Ditto.
8775 (lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
8778 2010-01-05 Stan Shebs <stan@codesourcery.com>
8780 Add fast tracepoints.
8781 * arch-utils.h (default_fast_tracepoint_valid_at): Declare.
8782 * arch-utils.c (default_fast_tracepoint_valid_at): New function.
8783 * breakpoint.h (enum bptype): Add bp_fast_tracepoint.
8784 * breakpoint.c (tracepoint_type): New function.
8785 (ALL_TRACEPOINTS): Use it.
8786 (should_be_inserted): Ditto.
8787 (bpstat_check_location): Ditto.
8788 (print_one_breakpoint_location): Ditto.
8789 (user_settable_breakpoint): Ditto.
8790 (set_breakpoint_location_function): Ditto.
8791 (disable_breakpoints_in_shlibs): Ditto.
8792 (delete_trace_command): Ditto.
8793 (print_it_typical): Add bp_fast_tracepoint case.
8794 (bpstat_what): Ditto.
8795 (print_one_breakpoint_location): Ditto.
8796 (allocate_bp_location): Ditto.
8798 (breakpoint_re_set_one): Ditto.
8799 (disable_command): Ditto.
8800 (enable_command): Ditto.
8801 (check_fast_tracepoint_sals): New function.
8802 (break_command_really): Call it.
8803 (ftrace_command): New function.
8804 (_initialize_breakpoint): Add ftrace command.
8805 * gdbarch.sh (fast_tracepoint_valid_at): New.
8806 * gdbarch.h, gdbarch.c: Regenerate.
8807 * i386-tdep.c (i386_fast_tracepoint_valid_at): New function.
8808 (i386_gdbarch_init): Use it.
8809 * remote.c (struct remote_state): New field fast_tracepoints.
8810 (PACKET_FastTracepoints): New packet config type.
8811 (remote_fast_tracepoint_feature): New function.
8812 (remote_protocol_features): Add FastTracepoints.
8813 (remote_supports_fast_tracepoints): New function.
8814 (_initialize_remote): Add FastTracepoints.
8815 * tracepoint.c (download_tracepoint): Add fast tracepoint option.
8816 * NEWS: Mention fast tracepoints.
8818 2010-01-06 Joel Brobecker <brobecker@adacore.com>
8820 * gdb-gdb.py: New file.
8822 2010-01-05 Michael Snyder <msnyder@vmware.com>
8824 * infrun.c (handle_inferior_event): Fix typo in comment.
8826 2010-01-05 Jan Kratochvil <jan.kratochvil@redhat.com>
8828 * symfile.c (syms_from_objfile): Remove the !MAINLINE conditional.
8830 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8832 * features/Makefile (WHICH): Add s390-linux32, s390-linux64,
8834 (s390-linux32-expedite): Define.
8835 (s390-linux64-expedite): Define.
8836 (s390x-linux64-expedite): Define.
8837 * features/s390-acr.xml: New file.
8838 * features/s390-fpr.xml: New file.
8839 * features/s390-core32.xml: New file.
8840 * features/s390-core64.xml: New file.
8841 * features/s390x-core64.xml: New file.
8842 * features/s390-linux32.xml: New file.
8843 * features/s390-linux64.xml: New file.
8844 * features/s390x-linux64.xml: New file.
8845 * features/s390-linux32.c: New generated file.
8846 * features/s390-linux64.c: New generated file.
8847 * features/s390x-linux64.c: New generated file.
8849 * regformats/s390-linux32.dat: New generated file.
8850 * regformats/s390-linux64.dat: New generated file.
8851 * regformats/s390x-linux64.dat: New generated file.
8852 * regformats/reg-s390.dat: Remove.
8853 * regformats/reg-s390x.dat: Remove.
8855 * s390-nat.c: Include "auxv.h" and <elf.h>.
8856 (HWCAP_S390_HIGH_GPRS): Define if undefined.
8857 (s390_target_wordsize): New function.
8858 (s390_auxv_parse): Likewise.
8859 (s390_get_hwcap): Likewise.
8860 (s390_read_description): Likewise.
8861 (_initialize_s390_nat): Install s390_auxv_parse and
8862 s390_read_description.
8864 * s390-tdep.c: Include "features/s390-linux32.c",
8865 "features/s390-linux64.c", and "features/s390x-linux64.c".
8866 (struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
8867 (s390_register_call_saved): New function.
8868 (s390_register_name): Remove.
8869 (s390_register_type): Remove.
8870 (s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
8871 (s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
8872 (s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
8873 (s390_pseudo_register_name): New function.
8874 (s390_pseudo_register_type): New function.
8875 (s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
8876 Handle full GPR pesudos and varying pseudo register numbers.
8877 (s390_pseudo_register_write): Likewise
8878 (s390x_pseudo_register_read): Remove.
8879 (s390x_pseudo_register_write): Likewise.
8880 (s390_register_group): Remove.
8881 (s390_pseudo_register_group): New function.
8882 (s390_regmap_gregset): Add GPR upper halves.
8883 (s390x_regmap_gregset): Likewise.
8884 (s390_regmap_fpregset): Likewise.
8885 (s390_regmap_upper): New global variable.
8886 (s390_upper_regset): New global variable.
8887 (s390_upper_regset_sections): New global variable.
8888 (s390_regset_from_core_section): Handle GPR upper halves.
8889 (s390_core_read_description): New function.
8890 (s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
8891 register information. Handle varying pseudo register numbers.
8892 (s390_backchain_frame_unwind_cache): Likewise.
8893 (s390_frame_prev_register): Unwind full GPRs to show lower halves.
8894 (s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
8895 (s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
8896 PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
8897 Handle varying pseudo register numbers.
8898 (s390_unwind_pc): Handle varying pseudo register numbers.
8899 (s390_dwarf2_prev_register): New function.
8900 (s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
8901 register information. Handle varying pseudo register numbers.
8902 Install s390_dwarf2_prev_register to unwind full GPRs.
8903 (s390_gdbarch_init): Handle target descriptions. Assign varying
8904 pseudo register numbers. Install s390_adjust_frame_regnum.
8905 (_initialize_s390_tdep): Initialize target descriptions.
8907 * s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
8908 (S390_NUM_REGS): Redefine to include upper half registers.
8909 (S390_PC_REGNUM, S390_CC_REGNUM): Remove.
8910 (S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
8911 (tdesc_s390_linux32): Add declaration.
8912 (tdesc_s390_linux64): Likewise.
8913 (tdesc_s390x_linux64): Likewise.
8915 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8917 * regset.h (struct core_regset_section): Add HUMAN_NAME.
8918 * i386-linux-tdep.c (i386_linux_regset_sections): Fill in HUMAN_NAME.
8919 * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
8920 (ppc_linux_vmx_regset_sections): Likewise.
8921 (ppc_linux_fp_regset_sections): Likewise.
8923 * corelow.c (get_core_register_section): Constify arguments.
8924 (get_core_registers): Use gdbarch_core_regset_sections instead
8925 of hard-coded platform-specific register section names.
8927 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8929 * dwarf2loc.c (read_pieced_value): If a piece occupies part of
8930 a register, assume the least-significant part is used.
8931 (write_pieced_value): Likewise.
8933 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
8935 * printcmd.c: Include "arch-utils.h".
8936 (do_one_display): Re-parse expression if current architecture changed.
8938 2010-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8939 Joel Brobecker <brobecker@adacore.com>
8941 * gdbtypes.c (check_typedef): New comment on type length.
8942 * value.c (allocate_value_lazy): Remove the unused atype variable. New
8943 comment on type length.
8944 (value_primitive_field): Keep the original TYPE value, new comment.
8946 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
8948 * cli/cli-script.c (process_next_line): Rename p1 as p_end and p2 as
8949 p_start. Change != comparisons to > and < comparisons.
8951 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
8953 * cli/cli-script.c (process_next_line): Check P2 overrun.
8955 2009-01-01 Joel Brobecker <brobecker@adacore.com>
8957 Update the copyright hearder to add year 2010 for most GDB files.
8959 2009-01-01 Joel Brobecker <brobecker@adacore.com>
8961 Fix build failure in inf-ptrace.c.
8962 * inf-ptrace.c (inf_ptrace_follow_fork): Fix typo.
8964 2010-01-01 Joel Brobecker <brobecker@adacore.com>
8966 * top.c (print_gdb_version): Update copyright year.
8968 2010-01-01, 10 Joel Brobecker <brobecker@adacore.com>
8970 Fix break *FUN'address thread NUM.
8971 * ada-lex.l (task): Expand rule to also match the thread keyword.
8973 2010-01-01 Joel Brobecker <brobecker@adacore.com>
8975 Fix break *FUN'address task NUM.
8976 * ada-lex.l (task): New rule.
8977 * ada-lang.c (valid_task_id): Make sure the Ada task list has
8978 been built before using it.
8980 For older changes see ChangeLog-2009.
8986 version-control: never