1 Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat>
3 From nigel@algor.co.uk.
4 * ser-go32.c (dos_close): Don't crash if scb null.
5 (dos_sendbreak): New function.
6 (dos_ops): Point to dos_sendbreak.
7 (dos_info): Calculate COM number correctly.
9 Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
11 * xcoffread.c (process_xcoff_symbol): Use new variables
12 func_symbol_type and var_symbol_type as type of functions and
13 variables which don't have any stabs associated with them.
14 Reindent most of function.
15 (_initialize_xcoffread): Initialize *_symbol_type.
17 * xcoffread.c (read_xcoff_symtab): Reindent most of function.
18 Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
19 them (this part commented out as I didn't quite get it to work).
20 (cs_to_section, find_targ_sec): New functions, to support above code.
21 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
24 Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
26 * gdbtk.tcl (create_file_win): Disable old popup menu for source
29 * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
30 downloads to SPARClite demo boards.
32 Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
34 * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had
35 no hope of working as is for a long time (in particular, shebs' 27
36 Jan 95 change confuses the issue further--target_read_memory and
37 xfer_core_file do *not* do the same thing in this context).
40 Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
42 * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for
43 procedure linkage table symbols, it is no longer set due to the
44 Jan 6 BFD change in bfd/elfcode.h.
46 Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com>
48 * top.c (use_windows): Clarify comments.
50 * convex-tdep.c (xfer_core_file): Comment out.
51 * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
52 * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
53 references to target_read_memory.
54 * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
56 * corelow.c (core_open, core_detach): Make static.
58 * arm-tdep.c: Make it compile.
59 (exec_file_command, xfer_core_file): Comment out.
60 (arm_print_insn): Remove, now in libopcodes.
61 (skip_prologue): Comment out most of body.
62 (arm_frame_find_saved_regs): Move here from tm-arm.h.
63 (_initialize_arm_tdep): Set tm_print_insn.
64 * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
65 (XFER_CORE_FILE): Remove.
66 (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
68 Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
70 * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
72 Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
74 * symtab.c (find_pc_line): When subtracting one to get a line
75 number, make sure not to end up with zero.
77 * remote-vx.c: Revert all of Kung's changes of 16 Jan. The
78 problems with those changes were (a) the file didn't compile, (b)
79 they changed memset to bzero--memset is correct, (c) they took out
80 code to deal with boards lacking floating point, (d) who knows
81 what I didn't discover in a quick read.
83 Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com)
85 * sparcl-tdep.c: Clean up formatting and indentation.
87 Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat>
89 * remote-hms.c (hms_ops): Change ref of hr_load_image
91 (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
92 dcache_poke, dcache_init): Deleted.
93 (hms_open, hms_resume, hms_fetch_word, hms_store_word):
94 Use dcache routines provided by remote-util.h
96 Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com>
98 * configure.in: Add support for powerpc-*-eabi.
100 * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
103 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
105 * language.h (struct language_defn): New field c_style_arrays.
106 * language.c (unknown_language_defn, auto_language_defn,
107 local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
108 asm_language_defn): Set c_style_arrays to true.
109 * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
110 f-lang.c (f_language_defn): Set c_style_arrays to false.
111 * valops.c (value_string): If c_style_array is not set,
112 allocate string in gdb (not inferior) using allocate_value.
114 * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
115 Only call value_coerce_array if current_language->c_style_arrays.
116 * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.)
118 * valops.c (chill_varying_type): New predicate.
119 * valops.c (value_cast): Support assigning a fixed string or array
120 to a variable string/array structure.
122 * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound.
123 Check index>=lowerbound, and then add lowerbound to index here,
124 instead of in caller. Generalize to arbitrary lval_types.
125 (value_subscript): Use enhanced value_subscripted_rvalue if
126 c_style_arrays is false (and index is in range).
128 Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
130 * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
132 * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
133 popping up expression window for the first time.
135 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
137 * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset:
138 TYPE_LENGTH is length in bytes, not bits.
140 Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
142 * infrun.c (proceed): Flush stdout before resuming inferior.
143 * infcmd.c (step_1), annotate.c (annotate_starting):
144 Don't bother to flush here.
146 Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu)
148 * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
149 by an ill-advised global search and replace.
151 Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
153 * gdbtk.tcl (create_registers_window): Work around a radiobutton
154 widget bug to make Options|Natural button work.
156 * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
157 g++ caused by out-of-order pc's.
158 * gdbtk.tcl (files_command): Remove duplicate file names. Also,
161 Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
163 * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
166 Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com>
168 Add support for Chill bitstring literals (e.h. H'FF00').
169 * ch-exp.y (match_bitstring_literal): Fix for proper endianness.
170 * expprint.c (print_subexp): Don't call error on OP_BITSTRING,
171 just print B'<unimlemented>'.
172 * gdbtypes.c (create_set_type): Fix bug in length calculation.
173 * valops.c, value.h (value_bitstring): New function.
174 * eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
176 * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
177 check that return type is non-void, and print in proper Chill syntax.
179 Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com>
181 * Makefile.in: Remove references to remote-mon.c.
182 * remote-mon.c: remove. Replaced by rom68k-rom.c.
183 * rom68k-rom.c: Support for Rom68k monitor.
185 Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
187 * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
188 gcc/ch/runtime not chillrt, since that is where the chill runtime
191 Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat>
193 * remote-hms.c (hms_load): Delete.
194 (target_ops): Use hr_load_image.
196 * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
197 Define memory_insert/remove_breakpoint.
198 * xm-go32.h: Remove redundant SIGs.
200 Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat>
202 * ser-go32.c: Rewritten by nigel@algor.co.uk.
204 Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
206 * expression.h (OP_LABELED): New operator, for Chill
207 labeled structre tuples.
208 * ch-exp.y (tuple_element, named_record_element, tuple_elements):
209 New non-terminals, to handle labeled structure tuples.
210 (tuple): Re-define using tuple_elements.
211 * eval.c (evaluate_labeled_field_init): New function, to handle
212 initialization of structure fields, possibly using OP_LABELED.
213 (evaluate_subexp): Use it.
214 * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
215 for Chill. Handled OP_LABELED.
216 * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
218 * eval.c (evaluate_subexp): Handle Chill Powerset tuples.
219 * valarith.c (value_bit_index): Just treat bitstring as represented
220 by an array of bytes. Alignment is handled by compiler.
222 Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com>
224 * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
225 * sh-tdep.c (gdb_print_insn_sh): Ditto.
227 Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com>
229 * remote-os9k.c (rombug_open): Fix a bug in exception handling
231 * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
234 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
236 * parse.c (_initialize_parse): Improve wording of names of
239 Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
241 * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
242 (mips_fpu): Change type to enum mips_fpu_type.
243 (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
244 * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
246 (mips_fpu_string): New static variable.
247 (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
248 (mips_pop_frame): Likewise.
249 (mips_extract_return_value): Likewise.
250 (mips_store_return_value): Likewise.
251 (mips_set_fpu_command): New static function.
252 (mips_show_fpu_command): New static function.
253 (_initialize_mips_tdep): Change handling of set/show mipsfpu.
255 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
257 * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
259 * parse.c (write_exp_msymbol): Use new variables
260 msym_*_symbol_type as type of msymbol expression.
261 (_initialize_parse): Initialize them.
263 Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com>
265 General cleanup and simplication of disassembler interface.
266 * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
267 hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
268 m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
269 rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
270 * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
271 had been -pinsn.c files.
272 * Makefile.in (ALLDEPFILES): Remove removed files.
273 (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
274 hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
275 m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
276 rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
277 Remove compile actions.
278 * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
279 vax-tdep.o: Add compile actions.
280 * defs.h (tm_print_insn): New global.
281 * a29k-tdep.c (gdb_print_insn_a29k): New function.
282 (_initialize_a29k_tdep): Rename from _initialize_29k,
284 * alpha-tdep.c (print_insn): Remove.
285 (_initialize_alpha_tdep): Set tm_print_insn.
286 * arm-tdep.c (arm_print_insn): New function, was print_insn
288 * convex-tdep.c (convex_print_insn): New function, was print_insn
290 * h8300-tdep.c (print_insn): Remove.
291 (gdb_print_insn_h8300): New function.
292 (_initialize_h8300_tdep): New function.
293 * h8500-tdep.c (print_insn): Remove.
294 (_initialize_h8500_tdep): New function.
295 * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
296 * i386-tdep.c (_initialize_i386_tdep): New function.
297 * i960-tdep.c (mem, next_insn): New functions, were in
299 (_initialize_i960_tdep): Set tm_print_insn.
300 * m68k-tdep.c (_initialize_m68k_tdep): New function.
301 * m88k-tdep.c (_initialize_m88k_tdep): New function.
302 * mips-tdep.c (gdb_print_insn_mips): New function.
303 (_initialize_mips_tdep): Set tm_print_insn.
304 * pyr-tdep.c (pyr_print_insn): New function, was print_insn
306 * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
307 * sh-tdep.c (print_insn): Remove.
308 (gdb_print_insn_sh): New function.
309 (_initialize_sh_tdep): Set tm_print_insn.
310 * sparc-tdep.c (_initialize_sparc_tdep): New function.
311 * w65-tdep.c (print_insn): Remove.
312 (_initialize_w65_tdep): New function.
313 * z8k-tdep.c (print_insn): Remove.
314 (gdb_print_insn_z8k): New function.
315 (_initialize_z8k_tdep): Set tm_print_insn.
316 * printcmd.c (print_insn): New function, generic disassembler.
317 * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
319 Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com>
321 * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
322 and config/a29k/vx29k.mt.
323 * configure.in: add new configuration a29k-*-vxworks.
324 * remote-vx29k.c: new file merged from WRS.
325 * remote-vx.c: merge changes from WRS.
326 * config/a29k/vx29k.mt: new file for new configuration.
327 * config/a29k/tm-vx29k.h: new header file for newconfiguration.
329 Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat>
331 * breakpoint.h (disable_breakpoint, enable_breakpoint):
333 (enum bpdisp): Change name of 'delete' member to 'del'.
334 (struct bpstat): Changed name to 'bpstats'.
335 * breakpoint.c (disable_breakpoint, enable_breakpoint,
336 breakpoint_chain): Made globally visible.
337 (bpstat_stop_status): Use new name for bpstat.
338 (break_command_1, watch_command_1, catch_command_1,
339 breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
341 (set_breakpoint_sal): New function.
342 * defs.h (registers_changed_hook): New declaration.
343 * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
344 * inflow.c (new_tty): Treat WIN32 in same way as __GO32__
345 * main.c (main): Don't scan options when in WIN32 and exit
346 without entering main loop.
347 * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
348 * symtab.h (struct symbol, struct partial_symbol): Changed name of
349 member 'class' to 'aclass'.
350 (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
351 * top.c (registers_changed_hook): New definition.
352 * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
353 in same way as __GO32__.
354 * value.h (c_typedef_print): Rename 'new' argument.
356 * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
357 * configure.in: Suppprt for w65,
360 Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
362 * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
363 not stop_pc, to proceed.
365 * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
367 Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
369 * infcmd.c (signal_command): Accept "signal 0"; the change to not
370 accept it was accidental. "handle 0" and "info signal 0" remain
373 Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com>
375 * Makefile.in (all): Don't make libgdb-files.
376 (libgdb): New action, makes libgdb-files.
378 Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com>
380 * stabsread.c (read_enum_type): When pending enum symbols are
381 put into the enum type, they must be inserted in "backwards
382 order, in case we've overflowed a struct pending buffer.
385 Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
387 * gdbtk.c, gdbtk.tcl: Update/add copyright.
388 * gdbtk.tcl (build_framework): Several fixes for filespec widget,
389 including dismiss button, and better error handling.
390 * (create_command_win): Bind button 2 to retrieve selection.
393 Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
395 * README: Add note about SPARCworks cc release 3.0 and higher.
397 Add procfs support for Alpha OSF/1-2.x.
398 * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
399 OSF/1 native support.
400 * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
401 (MUNCH_DEFINE): Removed.
402 * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
404 * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
405 release 2.x and higher, else alpha-osf1.mh, as the procfs support
406 in release 1.x is incomplete.
407 * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
408 * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
409 fill_fpgregset): New routines for procfs support.
410 * inftarg.c (_initialize_inftarg): Don't add ptrace support
411 if we have an optional procfs and /proc is accessible.
412 * procfs.c: Include sys/fault.h and sys/syscall.h before
413 including sys/procfs.h.
414 (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
415 is defined, additionally perform a PIOCSSIG to really terminate
417 (create_procinfo): Always return a result.
418 (create_procinfo, do_attach): Don't trace T_IFAULT faults if
419 PROCFS_DONT_TRACE_IFAULT is defined.
420 (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
421 argument to startup_inferior if it is defined.
422 (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
423 of tracing exits from exec system calls. Needed for the user level
424 loader under Alpha OSF/1.
425 (do_detach): Clear any pending signal if we want to detach from
426 a process without a signal.
427 (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
428 don't issue a PIOCSSIG if pr_cursig already contains the signal we
430 (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
431 pending signals are numbered from 1 instead of 0.
432 (info_proc_mappings): Increase size of output format for addresses
433 if BFD_HOST_64_BIT is defined.
434 (procfs_stop): Renamed from child_stop.
435 (_initialize_procfs): Don't add procfs support if we have an
436 optional procfs and /proc is not accessible.
439 Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
441 * gdbtk.tcl: Add button to control mixed source disassembly.
442 Use text widgets in expr window. The give me more control over
444 Add auto-updating of exprs in expression window.
445 Handle expressions out of scope a bit better.
446 Make selected window pop up to the top when invoked via the
448 Make copyright message have raised relief.
450 * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
454 Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com>
456 * array-rom.c: Add support for most commands.
458 * monitor.c: Add GDB remote protocol for the hybrid environment on
461 Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu)
463 * command.c (show_user_1): Use print_command_line to show a user
464 defined command (including control structures).
466 * top.c (init_main): Change documentation for user defined
467 commands to indicate they may accept up to ten arguments.
469 Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
471 * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
472 `move $s8, $sp' instruction.
474 Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
476 * target.c, target.h (target_signal_from_command): New function.
477 * infrun.c (handle_command, signals_info), infcmd.c
478 (signal_command): Use it.
479 * infrun.c, infcmd.c: Update docstrings for these commands.
481 * target.h (enum target_signal), target.c (signals), target.c
482 (target_signal_from_host, target_signal_to_host): Add
483 TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
484 * config/tm-lynx.h: Define signal numbers for realtime events.
486 Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
488 * dbxread.c (process_one_symbol): Handle N_FUN symbols
489 for Sun acc 3.0 under SunOS4.
491 Changes to improve handling of runtime common symbols
493 * minsyms.c (get_symbol_leading_char): New routine to determine
494 the leading symbol character for an objfile.
495 (prim_record_minimal_symbol_and_info, install_minimal_symbols):
497 * objfiles.h (rt_common_objfile): New global, points to objfile
498 containing the runtime common minimal symbols.
499 * objfiles.c (free_objfile): Mark rt_common_objfile as
500 unallocated before freeing it.
501 * solib.c (allocate_rt_common_objfile): New routine to allocate
502 an objfile for the runtime common minimal symbols.
503 (solib_add_common_symbols): Allocate an objfile for the runtime
504 common symbols if necessary and put common symbols into it.
505 Clean up code and comments.
506 (solib_add, special_symbol_handling): Cleanup comments regarding
507 runtime common symbols.
508 * stabsread.c (scan_file_globals_1): New routine, contains
509 old scan_file_globals code. Checks if there are any unresolved
510 global symbols before starting the expensive minimal symbol table
512 (scan_file_globals): Now calls scan_file_globals_1 for the passed
513 objfile and eventually for the runtime common objfile. Complains
514 about any unresolved global symbols and removes them from the
515 global symbol chain to avoid dangling pointers into the symbol
516 table if the symbol table is reread.
518 Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
520 * Makefile.in (install_only uninstall): Indent for clarity.
522 * core.c (dis_asm_read_memory): Add call to
523 dis_asm_read_memory_hook to provide alternate way for disassembler
526 * defs.h: Protect from multiple inclusion. Add decl for
527 dis_asm_read_memory_hook.
529 * top.c: Make window startup be the default.
530 * Add dis_asm_read_memory_hook.
533 * gdbtk.c (finish_saving_output): Don't do anything if not saving
535 * (breakpoint_notify): Don't send null filename to tcl.
536 * (gdb_eval): New tcl command to eval an expression.
537 * (gdb_disassemble): New tcl command to do disassembly. This
538 allows tcl code to choose between exec file and target memeory,
539 and can also do mixed source and assembly.
540 * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
541 that more of the environment is set up. Also, create link between
542 gdb and tcl vars disassemble{-_}from{-_}exec.
544 * gdbtk.tcl: New expression window support.
545 * Make assembly window be 80 columns wide.
546 * Use new disassembly method. Add menu items to select
547 disassembly from exec file or target.
548 * Change View menubar item to Options.
550 * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
551 since they don't exist yet.
553 * Pop up a copyright window on startup.
556 Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu)
558 * stabsread.c (define_symbol): Handle `a' symbol type used for
559 reference parameter passed in a register.
562 Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
564 * gdbtk.tcl (build_framework): Add standard commands menu, more
565 windows to standard windows menu.
566 (not_implemented_yet): Clarify message.
569 Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com>
571 * defs.h: move include tm.h up, so that the type LONGEST can
572 also based on the target requirement to determine. In this case
575 * remote-os9k.c (rombug_open): catch exception e in rombug.
576 * remote-os9k.c (rombug_wait): print message before register display
579 Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
581 * top.c (locate_arg): Call strchr not index.
583 Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
585 * ch-exp.y (literal): Recognize NULL.
586 (tuple): Parse simple unlabelled tuples.
587 * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
588 evaluate brace-initializer-expressions depending on context.
589 (evaluate_subexp case UNOP_CAST): Pass the target type as
590 expected type when evaluating the expression.
592 * ch-typeprint.c (chill_type_print_base): Get names of PTR and
594 * ch-valprint.c (chill_print_type_scalar): New function, to handle
595 TYPE_CODE_RANGE better than print_type_scalar does.
596 (chill_val_print_array_elements): Use above new function.
598 Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com>
600 * remote-udi.c (udi_load): Tell symbol_file_add that the
601 program being loaded is the main program.
603 For older changes see ChangeLog-94
609 version-control: never