gdb/ChangeLog

   1 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
   2
   3         * ppc-tdep.h (enum powerpc_elf_abi): New data type.
   4         (struct gdbarch_tdep): New member elf_abi.
   5
   6         * rs6000-tdep.c: Include "elf/ppc64.h".
   7         (rs6000_gdbarch_init): Detect ELF ABI version.
   8
   9 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  10
  11         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
  12         within a register pair holding a DFP 128-bit value on little-endian.
  13         (ppc64_sysv_abi_return_value_base): Likewise.
  14         * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
  15         (dfp_pseudo_register_write): Likewise.
  16
  17 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  18
  19         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
  20         offset on little-endian when passing _Decimal32.
  21         (ppc64_sysv_abi_return_value_base): Likewise for return values.
  22
  23 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  24
  25         * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
  26         of the overlapped FP register within the VSX register on little-
  27         endian platforms.
  28         (efpr_pseudo_register_write): Likewise.
  29
  30 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  31
  32         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
  33         offset on little-endian when passing small structures.
  34
  35 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  36
  37         * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
  38         (struct ppc64_sysv_argpos): New data structure.
  39         (ppc64_sysv_abi_push_float): Remove.
  40         (ppc64_sysv_abi_push_val): New function.
  41         (ppc64_sysv_abi_push_integer): Likewise.
  42         (ppc64_sysv_abi_push_freg): Likewise.
  43         (ppc64_sysv_abi_push_vreg): Likewise.
  44         (ppc64_sysv_abi_push_param): Likewise.
  45         (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
  46         (ppc64_sysv_abi_return_value_base): New function.
  47         (ppc64_sysv_abi_return_value): Refactor to use it.
  48
  49 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  50
  51         * NEWS: Document new target powerpc64le-*-linux*.
  52
  53 2014-02-04  Mark Kettenis  <kettenis@gnu.org>
  54
  55         * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
  56         (sparc64obsd_supply_gregset): Handle registers sets used in ELF
  57         core dumps.
  58         (sparc64obsd_init_abi): Adjust minimum size of the general purpose
  59         register set used in ELF core dumps.  Add floating-point register set.
  60
  61 2014-02-03  Kevin Buettner  <kevinb@redhat.com>
  62
  63         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
  64         dwarf2_to_gdb[] table using symbolic constants.  Adjust
  65         penultimate entry from number representing the PC register
  66         to symbolic constant representing the MDR register.  Add
  67         constant for the PC register to the end of the table.
  68
  69 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  70
  71         * bsd-kvm.c: Include <sys/param.h>
  72
  73 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  74
  75         * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
  76
  77 2014-01-31  Joel Brobecker  <brobecker@adacore.com>
  78
  79         * ada-lang.h (clear_ada_sym_cache): Delete.
  80
  81 2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>
  82
  83         * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
  84
  85 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
  86
  87         * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
  88           the sigreturn register save area only if the syscall is
  89           sigreturn.
  90
  91 2014-01-29  Joel Brobecker  <brobecker@adacore.com>
  92
  93         * valops.c (value_slice): Minor reformatting.
  94
  95 2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>
  96
  97         * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
  98
  99 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
 100
 101         * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
 102         New static globals.
 103         (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
 104         (ada_ignore_descriptive_types_p): New static global.
 105         (find_parallel_type_by_descriptive_type): Return immediately
 106         if ada_ignore_descriptive_types_p is set.
 107         (_initialize_ada_language): Register new commands "maintenance
 108         set ada", "maintenance show ada", "maintenance set ada
 109         ignore-descriptive-types" and "maintenance show ada
 110         ignore-descriptive-types".
 111         * NEWS: Add entry for new "maint ada set/show
 112         ignore-descriptive-types" commands.
 113
 114 2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>
 115
 116         * record-btrace.c (record_btrace_close): Call btrace_teardown
 117         for all threads.
 118
 119 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 120
 121         * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
 122         "ui-out.h".
 123
 124 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 125
 126         * ada-typeprint (type_is_full_subrange_of_target_type):
 127         New function.
 128         (print_range): Add parameter bounds_prefered_p.  If not set,
 129         try printing range types using the name of their base type.
 130         (print_range_type): Add parameter bounds_prefered_p.
 131         Use it in call to print_range.
 132         (print_array_type, ada_print_type): Update calls to print_range
 133         and print_range_type.
 134
 135 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 136
 137         * ada-typeprint.c (print_array_type, print_choices, print_range)
 138         (print_range_bound, print_dynamic_range_bound, print_range_type):
 139         Remove declaration.
 140
 141 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 142
 143         * ada-typeprint.c (print_range): Add missing empty line
 144         after local declaration.
 145
 146 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 147
 148         * ada-valprint.c (print_optional_low_bound): Get index_type's
 149         target type for as long as it is a TYPE_CODE_RANGE.
 150
 151 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 152
 153         * procfs.c (procfs_make_note_section): Remove assertion and
 154         associated comment.
 155
 156 2014-01-24  Yao Qi  <yao@codesourcery.com>
 157
 158         * remote.c (remote_read_bytes): Change type of len to ULONGEST.
 159         * corelow.c (get_core_siginfo): Likewise.
 160
 161 2014-01-24  Yao Qi  <yao@codesourcery.com>
 162
 163         * remote.c (remote_write_bytes_aux): Change type of 'len' to
 164         ULONGEST.  Don't check 'len' is negative.
 165         (remote_write_bytes):  Change type of 'len' to ULONGEST.
 166
 167 2014-01-23  Tom Tromey  <tromey@redhat.com>
 168
 169         PR python/16485:
 170         * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
 171         Handle exception from frame.block.
 172         (FrameVars.fetch_frame_locals): Likewise.
 173
 174 2014-01-23  Tom Tromey  <tromey@redhat.com>
 175
 176         PR python/16487:
 177         * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
 178         on a NULL pointer.  Move "goto error" to correct place.
 179
 180 2014-01-23  Tom Tromey  <tromey@redhat.com>
 181
 182         PR python/16491:
 183         * python/py-framefilter.c (apply_frame_filter): Call
 184         ensure_python_env after computing gdbarch.
 185
 186 2014-01-23  Yao Qi  <yao@codesourcery.com>
 187
 188         * target.c (raw_memory_xfer_partial): Change argument type
 189         from void * to gdb_byte *.
 190         (memory_xfer_partial_1, memory_xfer_partial): Likewise.
 191
 192 2014-01-22  Doug Evans  <dje@google.com>
 193
 194         New gdbserver option --debug-format=timestamp.
 195         * NEWS: Mention it.
 196
 197 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
 198
 199         * syscalls/s390x-linux.xml: New file.
 200         * syscalls/s390-linux.xml: New file.
 201         * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
 202         (XML_SYSCALL_FILENAME_S390X): Likewise.
 203         (op_svc): New enum value for SVC opcode.
 204         (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
 205         (s390_linux_get_syscall_number): New function.
 206         (s390_gdbarch_init): Register '*get_syscall_number' and the
 207         syscall xml file name.
 208         * data-directory/Makefile.in (SYSCALLS_FILES): Add
 209         "s390-linux.xml" and "s390x-linux.xml".
 210         * NEWS: Announce new feature.
 211
 212 2014-01-22  Baruch Siach  <baruch@tkos.co.il>
 213
 214         * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
 215
 216 2014-01-22  Pedro Alves  <palves@redhat.com>
 217
 218         * xtensa-config.c: Include defs.h.
 219
 220 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 221
 222         * common/common-utils.h: Add "ARI:" comment beside __func__
 223         reference.
 224
 225 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 226
 227         * common/common-utils.h (FUNCTION_NAME): Expand the macro's
 228         documentation a bit.
 229
 230 2014-01-21  Roland McGrath  <mcgrathr@google.com>
 231
 232         * configure.ac: Call AM_PROG_INSTALL_STRIP.
 233         * configure: Regenerate.
 234         * aclocal.m4: Regenerate.
 235         * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
 236         New substituted variables.
 237         (install-strip): New target.
 238         (INSTALL_SCRIPT): New substituted variable.
 239         (FLAGS_TO_PASS): Add it.
 240         (install-only): Use $(INSTALL_SCRIPT) rather than
 241         $(INSTALL_PROGRAM) for gcore.
 242
 243 2014-01-20  Tom Tromey  <tromey@redhat.com>
 244
 245         * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
 246         together.
 247
 248 2014-01-20  Tom Tromey  <tromey@redhat.com>
 249
 250         * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
 251         (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
 252         (deprecated_cmd_warning, complete_on_cmdlist): Update.
 253         * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
 254         (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
 255         (struct cmd_list_element) <flags>: Remove.
 256         <cmd_deprecated, deprecated_warn_user, malloced_replacement,
 257         doc_allocated>: New fields.
 258         <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
 259         bitfields.
 260         * maint.c (maintenance_do_deprecate): Update.
 261         * top.c (execute_command): Update.
 262
 263 2014-01-20  Baruch Siach  <baruch@tkos.co.il>
 264
 265         * xtensa-linux-nat.c: Include asm/ptrace.h.
 266
 267 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 268
 269         * Makefile.in (SFILES): Add d-support.c.
 270         (COMMON_OBS): Add d-support.o.
 271         * d-lang.h (d_parse_symbol): Add comment, now defined in
 272         d-support.c.
 273         * d-lang.c (parse_call_convention)
 274         (parse_attributes, parse_function_types)
 275         (parse_function_args, parse_type, parse_identifier)
 276         (call_convention_p, d_parse_symbol): Move functions to ...
 277         * d-support.c: ... New file.
 278
 279 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 280
 281         * d-lang.h (d_parse_symbol): Add declaration.
 282         * d-lang.c (extract_identifiers)
 283         (extract_type_info): Remove functions.
 284         (parse_call_convention, parse_attributes)
 285         (parse_function_types, parse_function_args)
 286         (parse_type, parse_identifier, call_convention_p)
 287         (d_parse_symbol): New functions.
 288         (d_demangle): Use d_parse_symbol to demangle D symbols.
 289
 290 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 291
 292         * d-lang.h (struct builtin_d_type): New data type.
 293         (builtin_d_type): Add declaration.
 294         * d-lang.c (d_language_arch_info, build_d_types)
 295         (builtin_d_type): New functions.
 296         (enum d_primitive_types): New data type.
 297         (d_language_defn): Change c_language_arch_info to
 298         d_language_arch_info.
 299         (d_type_data): New static variable.
 300         (_initialize_d_language): Initialize d_type_data.
 301
 302 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 303
 304         * d-lang.h (d_main_name): Add declaration.
 305         * d-lang.c (d_main_name): New function.
 306         * symtab.c (find_main_name): Add call to d_main_name.
 307
 308 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 309
 310         * d-lang.c (d_language_defn): Change macro_expansion_c to
 311         macro_expansion_no.
 312
 313 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 314
 315         * MAINTAINERS: Add myself as a write-after-approval maintainer.
 316
 317 2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>
 318
 319         * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
 320         gdb_exception" declaration.
 321         * remote.c (getpkt_or_notif_sane): Likewise.
 322
 323 2014-01-17  Doug Evans  <dje@google.com>
 324
 325         * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
 326         function, contents of dirnames_to_char_ptr_vec_append moved here.
 327         (delim_string_to_char_ptr_vec): New function.
 328         (dirnames_to_char_ptr_vec_append): Rewrite.
 329         * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
 330
 331 2014-01-17  Doug Evans  <dje@google.com>
 332
 333         * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
 334         and moved here ...
 335         * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
 336         #include "common-utils.h".
 337         (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
 338         * common/vec.h (VEC_ASSERT_PASS): Update.
 339         * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
 340         (MACH_CHECK_ERROR): Update.
 341
 342 2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>
 343
 344         * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
 345         comments.
 346         * gdbarch.h: Regenerate.
 347
 348 2014-01-16  Tom Tromey  <tromey@redhat.com>
 349
 350         * value.c (struct value) <regnum>: Move earlier.
 351
 352 2014-01-16  Tom Tromey  <tromey@redhat.com>
 353
 354         * remote.c (extended_remote_create_inferior): Rename from
 355         extended_remote_create_inferior_1.  Add "ops" argument.  Remove
 356         old implementation.
 357
 358 2014-01-16  Pedro Alves  <palves@redhat.com>
 359
 360         * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
 361         NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
 362         the backchain.
 363
 364 2014-01-16  Doug Evans  <dje@google.com>
 365
 366         * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
 367
 368 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 369
 370         * btrace.h (btrace_thread_flag): New.
 371         (struct btrace_thread_info) <flags>: New.
 372         * record-btrace.c (record_btrace_resume_thread)
 373         (record_btrace_find_thread_to_move, btrace_step_no_history)
 374         (btrace_step_stopped, record_btrace_start_replaying)
 375         (record_btrace_step_thread, record_btrace_decr_pc_after_break)
 376         (record_btrace_find_resume_thread): New.
 377         (record_btrace_resume, record_btrace_wait): Extend.
 378         (record_btrace_can_execute_reverse): New.
 379         (record_btrace_open): Fail in non-stop mode.
 380         (record_btrace_set_replay): Split into this, ...
 381         (record_btrace_stop_replaying): ... this, ...
 382         (record_btrace_clear_histories): ... and this.
 383         (init_record_btrace_ops): Init to_can_execute_reverse.
 384         * NEWS: Announce it.
 385
 386 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 387
 388         * target.h (struct target_ops) <to_decr_pc_after_break>: New.
 389         (forward_target_decr_pc_after_break)
 390         (target_decr_pc_after_break): New.
 391         * target.c (forward_target_decr_pc_after_break)
 392         (target_decr_pc_after_break): New.
 393         * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
 394         instead of gdbarch_decr_pc_after_break.
 395         * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 396         instead of gdbarch_decr_pc_after_break.
 397         * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
 398         instead of gdbarch_decr_pc_after_break.
 399         * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 400         instead of gdbarch_decr_pc_after_break.
 401         * linux-thread-db.c (check_event): Call target_decr_pc_after_break
 402         instead of gdbarch_decr_pc_after_break.
 403         * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
 404         instead of gdbarch_decr_pc_after_break.
 405
 406 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 407
 408         * btrace.c: Include regcache.h.
 409         (btrace_add_pc): New.
 410         (btrace_enable): Call btrace_add_pc.
 411         (btrace_is_empty): New.
 412         * btrace.h (btrace_is_empty): New.
 413         * record-btrace.c (require_btrace, record_btrace_info): Call
 414         btrace_is_empty.
 415
 416 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 417
 418         * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
 419         Support delta reads.
 420         (linux_disable_btrace): Change return type.
 421         * common/linux-btrace.h (linux_read_btrace): Change parameters
 422         and return type to allow error reporting.  Update users.
 423         (linux_disable_btrace): Change return type.  Update users.
 424         * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
 425         New.
 426         (btrace_error): New.
 427         (btrace_block) <begin>: Comment on BEGIN == 0.
 428         * btrace.c (btrace_compute_ftrace): Start from the end of
 429         the current trace.
 430         (btrace_stitch_trace, btrace_clear_history): New.
 431         (btrace_fetch): Read delta trace, return if replaying.
 432         (btrace_clear): Move clear history code to btrace_clear_history.
 433         (parse_xml_btrace): Throw an error if parsing failed.
 434         * target.h (struct target_ops) <to_read_btrace>: Change parameters
 435         and return type to allow error reporting.
 436         (target_read_btrace): Change parameters and return type to allow
 437         error reporting.
 438         * target.c (target_read_btrace): Update.
 439         * remote.c (remote_read_btrace): Support delta reads.  Pass
 440         errors on.
 441         * NEWS: Announce it.
 442
 443 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 444
 445         * record.h (record_btrace_frame_unwind)
 446         (record_btrace_tailcall_frame_unwind): New declarations.
 447         * dwarf2-frame: Include record.h
 448         (dwarf2_frame_cfa): Throw an error for btrace frames.
 449         * record-btrace.c: Include hashtab.h.
 450         (btrace_get_bfun_name): New.
 451         (btrace_call_history): Call btrace_get_bfun_name.
 452         (struct btrace_frame_cache): New.
 453         (bfcache): New.
 454         (bfcache_hash, bfcache_eq, bfcache_new): New.
 455         (btrace_get_frame_function): New.
 456         (record_btrace_frame_unwind_stop_reason): Allow unwinding.
 457         (record_btrace_frame_this_id): Compute own id.
 458         (record_btrace_frame_prev_register): Provide PC, throw_error
 459         for all other registers.
 460         (record_btrace_frame_sniffer): Detect btrace frames.
 461         (record_btrace_tailcall_frame_sniffer): New.
 462         (record_btrace_frame_dealloc_cache): New.
 463         (record_btrace_frame_unwind): Add new functions.
 464         (record_btrace_tailcall_frame_unwind): New.
 465         (_initialize_record_btrace): Allocate cache.
 466         * btrace.c (btrace_clear): Call reinit_frame_cache.
 467         * NEWS: Announce it.
 468
 469 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 470
 471         * record-btrace.c (record_btrace_set_replay)
 472         (record_btrace_goto_begin, record_btrace_goto_end)
 473         (record_btrace_goto): New.
 474         (init_record_btrace_ops): Initialize them.
 475         * NEWS: Announce it.
 476
 477 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 478
 479         * record-btrace.c (record_btrace_find_new_threads)
 480         (record_btrace_thread_alive): New.
 481         (init_record_btrace_ops): Initialize to_find_new_threads and
 482         to_thread_alive.
 483
 484 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 485
 486         * record-btrace.c (record_btrace_resume): New.
 487         (record_btrace_wait): New.
 488         (init_record_btrace_ops): Initialize to_wait and to_resume.
 489
 490 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 491
 492         * record-btrace.c (record_btrace_xfer_partial)
 493         (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
 494         (record_btrace_allow_memory_access): New.
 495         (init_record_btrace_ops): Initialize new methods.
 496         * target.c (raw_memory_xfer_partial): Bail out if target reports
 497         that this memory is not available.
 498
 499 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 500
 501         * target.h (target_ops) <to_insert_breakpoint>
 502         <to_remove_breakpoint>: Add target_ops parameter.
 503         (forward_target_insert_breakpoint): New.
 504         (forward_target_remove_breakpoint): New.
 505         (memory_remove_breakpoint, memory_insert_breakpoint):
 506         Add target_ops parameter.
 507         * target.c (target_insert_breakpoint): Split into this and ...
 508         (forward_target_insert_breakpoint): ... this.
 509         (target_remove_breakpoint): Split into this and ...
 510         (forward_target_remove_breakpoint): ... this.
 511         (debug_to_insert_breakpoint): Add target_ops parameter.
 512         Call forward_target_insert_breakpoint.
 513         (debug_to_remove_breakpoint): Add target_ops parameter.
 514         Call forward_target_remove_breakpoint.
 515         (update_current_target): Do not inherit or default to_insert_breakpoint
 516         and to_remove_breakpoint.
 517         * corelow.c (ignore): Add target_ops parameter.
 518         * exec.c (ignore): Add target_ops parameter.
 519         * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
 520         Add target_ops parameter.
 521         * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
 522         Add target_ops parameter.
 523         * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
 524         Add target_ops parameter.
 525         * record-full.c (record_full_beneath_to_insert_breakpoint)
 526         (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
 527         (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
 528         (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
 529         (record_full_core_remove_breakpoint): Add target_ops parameter.
 530         Update users.
 531         (record_full_beneath_to_insert_breakpoint_ops)
 532         (record_full_beneath_to_remove_breakpoint_ops)
 533         (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
 534         (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
 535         tmp_to_remove_breakpoint_ops,
 536         record_full_beneath_to_insert_breakpoint_ops, and
 537         record_full_beneath_to_remove_breakpoint_ops.
 538         * remote-m32r-sdi.c (m32r_insert_breakpoint)
 539         (m32r_remove_breakpoint): Add target_ops parameter.
 540         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
 541         Add target_ops parameter.
 542         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
 543         Add target_ops parameter.
 544
 545 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 546             Markus Metzger  <markus.t.metzger@intel.com>
 547
 548         * record-btrace.c: Include frame-unwind.h.
 549         (record_btrace_frame_unwind_stop_reason)
 550         (record_btrace_frame_this_id, record_btrace_frame_prev_register)
 551         (record_btrace_frame_sniffer, record_btrace_frame_unwind):
 552         New.
 553         (init_record_btrace_ops): Install it.
 554
 555 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 556
 557         * frame.c (get_frame_unwind_stop_reason): Unconditionally call
 558         get_prev_frame_1.
 559
 560 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 561
 562         * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
 563         earlier.
 564
 565 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 566
 567         * frame-unwind.c: Include target.h.
 568         (frame_unwind_try_unwinder): New function with code from ...
 569         (frame_unwind_find_by_frame): ... here.  New variable
 570         unwinder_from_target, call also target_get_unwinder)
 571         (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
 572         * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
 573         * target.h (struct target_ops): New fields to_get_unwinder and
 574         to_get_tailcall_unwinder.
 575         (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
 576
 577 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 578
 579         * record-btrace.c (record_btrace_fetch_registers)
 580         (record_btrace_store_registers)
 581         (record_btrace_to_prepare_to_store): New.
 582         (init_record_btrace_ops): Add the above.
 583
 584 2014-01-16  Tom Tromey  <tromey@redhat.com>
 585
 586         * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
 587         * target.h (struct target_ops) <to_prepare_to_store>: Add
 588         argument.
 589         (target_prepare_to_store): Add argument.
 590         * target.c (debug_to_prepare_to_store): Add argument.
 591         (update_current_target): Update.
 592         * remote.c (remote_prepare_to_store): Add 'self' argument.
 593         * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
 594         * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
 595         * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
 596         * record-full.c (record_full_core_prepare_to_store): Add 'self'
 597         argument.
 598         * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
 599         * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
 600         * monitor.c (monitor_prepare_to_store): Add 'self' argument.
 601         * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
 602         * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
 603
 604 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 605
 606         * btrace.h (replay) <replay>: New.
 607         (btrace_is_replaying): New.
 608         * btrace.c (btrace_clear): Free replay iterator.
 609         (btrace_is_replaying): New.
 610         * record-btrace.c (record_btrace_is_replaying): New.
 611         (record_btrace_info): Print insn number if replaying.
 612         (record_btrace_insn_history): Start at replay position.
 613         (record_btrace_call_history): Start at replay position.
 614         (init_record_btrace_ops): Init to_record_is_replaying.
 615
 616 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 617
 618         * record-btrace.c (record_btrace_insn_history_range): Include
 619         end.
 620         (record_btrace_insn_history_from): Adjust range.
 621         (record_btrace_call_history_range): Include
 622         end.
 623         (record_btrace_call_history_from): Adjust range.
 624         * NEWS: Announce changes.
 625
 626 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 627
 628         * record.h (enum record_print_flag)
 629         <record_print_indent_calls>: New.
 630         * record.c (get_call_history_modifiers): Recognize /c modifier.
 631         (_initialize_record): Document /c modifier.
 632         * record-btrace.c (btrace_call_history): Add btinfo parameter.
 633         Reorder fields.  Optionally indent the function name.  Update
 634         all users.
 635         * NEWS: Announce changes.
 636
 637 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 638
 639         * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
 640
 641 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 642
 643         * btrace.c (ftrace_new_function): Start counting at one.
 644         * record-btrace.c (record_btrace_info): Adjust number of calls
 645         and insns.
 646         * NEWS: Announce it.
 647
 648 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 649
 650         * record-btrace.c (btrace_call_history_insn_range): Print
 651         insn range as [begin, end].
 652
 653 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 654
 655         * btrace.h (struct btrace_func_link): New.
 656         (enum btrace_function_flag): New.
 657         (struct btrace_inst): Rename to ...
 658         (struct btrace_insn): ...this. Update all users.
 659         (struct btrace_func) <ibegin, iend>: Remove.
 660         (struct btrace_func_link): New.
 661         (struct btrace_func): Rename to ...
 662         (struct btrace_function): ...this. Update all users.
 663         (struct btrace_function) <segment, flow, up, insn, insn_offset)
 664         (number, level, flags>: New.
 665         (struct btrace_insn_iterator): Rename to ...
 666         (struct btrace_insn_history): ...this.
 667         Update all users.
 668         (struct btrace_insn_iterator, btrace_call_iterator): New.
 669         (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
 670         (struct btrace_target_info) <begin, end, level>
 671         <insn_history, call_history>: New.
 672         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 673         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 674         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 675         (btrace_call_number, btrace_call_begin, btrace_call_end)
 676         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 677         (btrace_find_function_by_number, btrace_set_insn_history)
 678         (btrace_set_call_history): New.
 679         * btrace.c (btrace_init_insn_iterator)
 680         (btrace_init_func_iterator, compute_itrace): Remove.
 681         (ftrace_print_function_name, ftrace_print_filename)
 682         (ftrace_skip_file): Change
 683         parameter to const.
 684         (ftrace_init_func): Remove.
 685         (ftrace_debug): Use new btrace_function fields.
 686         (ftrace_function_switched): Also consider gaining and
 687         losing symbol information).
 688         (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
 689         (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
 690         (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
 691         New.
 692         (ftrace_new_function): Move. Remove debug print.
 693         (ftrace_update_lines, ftrace_update_insns): New.
 694         (ftrace_update_function): Check for call, ret, and jump.
 695         (compute_ftrace): Renamed to ...
 696         (btrace_compute_ftrace): ...this. Rewritten to compute call
 697         stack.
 698         (btrace_fetch, btrace_clear): Updated.
 699         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 700         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 701         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 702         (btrace_call_number, btrace_call_begin, btrace_call_end)
 703         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 704         (btrace_find_function_by_number, btrace_set_insn_history)
 705         (btrace_set_call_history): New.
 706         * record-btrace.c (require_btrace): Use new btrace thread
 707         info fields.
 708         (record_btrace_info, btrace_insn_history)
 709         (record_btrace_insn_history, record_btrace_insn_history_range):
 710         Use new btrace thread info fields and new iterator.
 711         (btrace_func_history_src_line): Rename to ...
 712         (btrace_call_history_src_line): ...this. Use new btrace
 713         thread info fields.
 714         (btrace_func_history): Rename to ...
 715         (btrace_call_history): ...this. Use new btrace thread info
 716         fields and new iterator.
 717         (record_btrace_call_history, record_btrace_call_history_range):
 718         Use new btrace thread info fields and new iterator.
 719
 720 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 721
 722         * frame.h (frame_id_build_unavailable_stack_special): New.
 723         * frame.c (frame_id_build_unavailable_stack_special): New.
 724
 725 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 726
 727         * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
 728         (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
 729         (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
 730         to gdbarch.
 731         * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
 732         (i386_insn_is_jump, i386_jmp_p): New.
 733         (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
 734         insn_is_jump to gdbarch.
 735         * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
 736         * gdbarch.h: Regenerated.
 737         * gdbarch.c: Regenerated.
 738         * arch-utils.h (default_insn_is_call, default_insn_is_ret)
 739         (default_insn_is_jump): New.
 740         * arch-utils.c (default_insn_is_call, default_insn_is_ret)
 741         (default_insn_is_jump): New.
 742
 743 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 744
 745         * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
 746         Change to ...
 747         (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
 748         (btrace_read_type) <btrace_read_new>: Change to ...
 749         (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.
 750
 751 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 752
 753         * common/linux-btrace.c (linux_read_btrace): Free trace from
 754         previous iteration.
 755
 756 2014-01-15  Doug Evans  <dje@google.com>
 757
 758         * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
 759         uint32_t.
 760
 761 2014-01-15  Tom Tromey  <tromey@redhat.com>
 762
 763         * dbxread.c (process_one_symbol): Use set_objfile_main_name.
 764         * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
 765         * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
 766         (set_objfile_main_name): New function.
 767         * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
 768         language_of_main>: New fields.
 769         (set_objfile_main_name): Declare.
 770         * symtab.c (find_main_name): Loop over objfiles to find the main
 771         name and language.
 772         (set_main_name): Now static.
 773         (get_main_info): Add comment.
 774         * symtab.h (set_main_name): Don't declare.
 775
 776 2014-01-15  Tom Tromey  <tromey@redhat.com>
 777
 778         * symtab.c (main_progspace_key): New global.
 779         (struct main_info): New.
 780         (name_of_main, language_of_main): Remove.
 781         (get_main_info, main_info_cleanup): New function.
 782         (set_main_name, main_name, main_language): Use get_main_info.
 783         (_initialize_symtab): Initialize main_progspace_key.
 784
 785 2014-01-15  Tom Tromey  <tromey@redhat.com>
 786
 787         * dbxread.c (process_one_symbol): Update.
 788         * dwarf2read.c (read_partial_die): Update.
 789         * symfile.c (set_initial_language): Call main_language.
 790         * symtab.c (language_of_main): Now static.
 791         (set_main_name): Add 'lang' parameter.
 792         (find_main_name): Update.
 793         (main_language): New function.
 794         (symtab_observer_executable_changed): Update.
 795         * symtab.h (set_main_name): Update.
 796         (language_of_main): Remove.
 797         (main_language): Declare.
 798
 799 2014-01-15  Tom Tromey  <tromey@redhat.com>
 800
 801         * symfile.c (init_entry_point_info): Use new "initialized" field.
 802         Update.
 803         * objfiles.h (struct entry_point) <initialized>: New field.
 804         (struct objfile_per_bfd_storage) <ei>: New field, moved from...
 805         (struct objfile) <ei>: ...here.  Remove.
 806         * objfiles.c (entry_point_address_query): Update.
 807
 808 2014-01-15  Tom Tromey  <tromey@redhat.com>
 809
 810         * objfiles.c (entry_point_address_query): Relocate entry point
 811         address.
 812         (objfile_relocate1): Do not relocate entry point address.
 813         * objfiles.h (struct entry_info) <entry_point>: Update comment.
 814         <the_bfd_section_index>: New field.
 815         * symfile.c (init_entry_point_info): Find the entry point's
 816         section.
 817
 818 2014-01-15  Tom Tromey  <tromey@redhat.com>
 819
 820         * solib-frv.c (enable_break): Use entry_point_address_query.
 821
 822 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 823
 824         * NEWS: Add note on improved process record-replay on
 825         arm*-linux* targets.
 826
 827 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 828
 829         * arm-tdep.c (enum arm_record_result): New enum.
 830         (arm_record_unsupported_insn): New function.
 831         (arm_record_coproc_data_proc): Removed.
 832         (thumb2_record_ld_st_multiple): New function.
 833         (thumb2_record_ld_st_dual_ex_tbb): New function.
 834         (thumb2_record_data_proc_sreg_mimm): New function.
 835         (thumb2_record_ps_dest_generic): New function.
 836         (thumb2_record_branch_misc_cntrl): New function.
 837         (thumb2_record_str_single_data): New function.
 838         (thumb2_record_ld_mem_hints): New function.
 839         (thumb2_record_ld_word): New function.
 840         (thumb2_record_lmul_lmla_div): New function.
 841         (thumb2_record_decode_insn_handler): New function.
 842         (decode_insn): Add thumb32 instruction handlers.
 843
 844 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 845
 846         * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
 847         (struct arm_linux_record_tdep): Declare.
 848         (arm_canonicalize_syscall): New function.
 849         (arm_all_but_pc_registers_record): New function.
 850         (arm_linux_syscall_record): New function.
 851         (arm_linux_init_abi): Add syscall recording constructs.
 852         * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
 853         decoding.  (arm_record_coproc_data_proc): Update arm syscall
 854         decoding.
 855         * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
 856         <arm_syscall_record>: New field.
 857         * configure.tgt (arm*-*-linux*): Add linux-record.o to
 858         gdb_target_obs.
 859
 860 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 861
 862         * arm-tdep.c (thumb_record_misc): Update to use sp as base
 863         register for push instruction recording.
 864
 865 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 866
 867         * arm-tdep.c (thumb_record_misc): Update to correct logical
 868         error while recording ldm, ldmia and pop instructions.
 869
 870 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 871
 872         * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
 873
 874 2014-01-15  Pedro Alves  <palves@redhat.com>
 875
 876         * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
 877         (go32_resume, go32_fetch_registers, store_register)
 878         (go32_store_registers, go32_prepare_to_store)
 879         (go32_xfer_memory, go32_files_info, go32_kill_inferior)
 880         (go32_create_inferior, go32_can_run, go32_terminal_init)
 881         (go32_terminal_inferior, go32_terminal_ours): Delete forward
 882         declarations.
 883
 884 2014-01-15  Tom Tromey  <tromey@redhat.com>
 885
 886         * target.h (async_callback_ftype): New typedef.
 887         (struct target_ops) <to_async>: Use it.
 888
 889 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 890
 891         * python/py-value.c (get_field_type): Remove unnecessary curly
 892         braces for single-statement if block.
 893
 894 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 895
 896         * python/py-type.c (convert_field): Add missing empty line
 897         after declarations.
 898
 899 2014-01-14  Doug Evans  <dje@google.com>
 900
 901         * symfile.h (expand_symtabs_matching): Renamed from
 902         expand_partial_symbol_names.  Update prototype.
 903         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 904         * symfile.c (expand_symtabs_matching): Renamed from
 905         expand_partial_symbol_names.  New args file_matcher, kind.
 906         Rename arg fun to symbol_matcher.
 907         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 908         * ada-lang.c (ada_complete_symbol_matcher): Renamed from
 909         ada_expand_partial_symbol_name.
 910         (ada_make_symbol_completion_list): Update to call
 911         expand_symtabs_matching.
 912         (ada_add_global_exceptions): Call expand_symtabs_matching.
 913         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
 914         call map_symbol_filenames.
 915         * symtab.c (sources_info): Update to call map_symbol_filenames.
 916         (search_symbols): Call expand_symtabs_matching.
 917         (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
 918         (default_make_symbol_completion_list_break_on): Update to call
 919         expand_symtabs_matching.
 920         (make_source_files_completion_list): Update to call
 921         map_symbol_filenames.
 922
 923 2014-01-14  Doug Evans  <dje@google.com>
 924
 925         * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
 926         (expand_symtabs_symbol_matcher_ftype): New typedef.
 927         (quick_symbol_functions.expand_symtabs_matching): Update to use.
 928         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 929         * symfile.c (expand_partial_symbol_names): Update to use
 930         expand_symtabs_symbol_matcher_ftype.
 931         * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
 932         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 933         Arg name_matcher renamed to symbol_matcher.
 934         * psymtab.c (recursively_search_psymtabs): Update to use
 935         expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
 936         sym_matcher.
 937         (expand_symtabs_matching_via_partial): Update to use
 938         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 939         Arg name_matcher renamed to symbol_matcher.
 940
 941 2014-01-14  Doug Evans  <dje@google.com>
 942
 943         * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
 944         (map_partial_symbol_filenames): Ditto.
 945         * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
 946         (map_partial_symbol_filenames): Ditto.
 947         * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
 948         (map_partial_symbol_filenames): Ditto.
 949         * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
 950         (map_partial_symbol_filenames): Ditto.
 951         * symtab.c: Delete #include "psymtab.h".
 952
 953 2014-01-14  Pedro Alves  <palves@redhat.com>
 954             Tom Tromey  <tromey@redhat.com>
 955
 956         * infrun.c (use_displaced_stepping): Use find_record_target
 957         instead of RECORD_IS_USED.
 958         (adjust_pc_after_break): Use record_full_is_used instead of
 959         RECORD_IS_USED.
 960         * record-btrace.c (record_btrace_open): Call record_preopen
 961         instead of checking RECORD_IS_USED.
 962         * record-full.c (record_full_shortname)
 963         (record_full_core_shortname): New globals.
 964         (record_full_is_used): New function.
 965         (find_full_open): Call record_preopen instead of checking
 966         RECORD_IS_USED.
 967         (init_record_full_ops): Set the target's shortname to
 968         record_full_shortname.
 969         (init_record_full_core_ops): Set the target's shortname to
 970         record_full_core_shortname.
 971         * record-full.h (record_full_is_used): Declare.
 972         * record.c (find_record_target): Make extern.
 973         (record_preopen): New function.
 974         * record.h (RECORD_IS_USED): Delete macro.
 975         (find_record_target, record_preopen): Declare functions.
 976
 977 2014-01-14  Yao Qi  <yao@codesourcery.com>
 978
 979         * gdbarch.sh (core_xfer_shared_libraries): Change its argument
 980         'len''s type to ULONGEST.
 981         (core_xfer_shared_libraries_aix): Likewise.
 982         * gdbarch.c, gdbarch.h: Regenerated.
 983         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
 984         Change type of 'len' to ULONGEST.
 985         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
 986         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
 987
 988 2014-01-14  Yao Qi  <yao@codesourcery.com>
 989
 990         * common/linux-osdata.c (linux_xfer_osdata_processes): Change
 991         type of 'len' to ULONGEST.
 992         (linux_xfer_osdata_processgroups): Likewise.
 993         (linux_xfer_osdata_threads): Likewise.
 994         (linux_xfer_osdata_fds): Likewise.
 995         (linux_xfer_osdata_isockets): Likewise.
 996         (linux_xfer_osdata_shm): Likewise.
 997         (linux_xfer_osdata_sem): Likewise.
 998         (linux_xfer_osdata_msg): Likewise.
 999         (linux_common_xfer_osdata): Likewise.
1000         (struct osdata_type) <getter>: Likewise.
1001         * common/linux-osdata.h (linux_common_xfer_osdata): Update
1002         the declaration.
1003
1004 2014-01-14  Yao Qi  <yao@codesourcery.com>
1005
1006         * target.h (target_xfer_partial_ftype): Update.
1007         (struct target_ops) <to_xfer_partial>: Change 'len' type to
1008         ULONGEST.
1009         * aix-thread.c (aix_thread_xfer_partial): Change type of
1010         argument 'len' to ULONGEST.
1011         * auxv.c (procfs_xfer_auxv): Likewise.
1012         (ld_so_xfer_auxv): Likewise.
1013         (memory_xfer_auxv): Likewise.
1014         * bfd-target.c (target_bfd_xfer_partial): Likewise.
1015         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1016         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1017         * corelow.c (core_xfer_partial): Likewise.
1018         * ctf.c (ctf_xfer_partial): Likewise.
1019         * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
1020         '%u'.
1021         (darwin_read_dyld_info): Likewise.
1022         (darwin_xfer_partial): Likewise.
1023         * exec.c (section_table_xfer_memory_partial): Likewise.
1024         (exec_xfer_partial): Likewise.
1025         * exec.h (section_table_xfer_memory_partial): Update
1026         declaration.
1027         * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
1028         instead of plongest.
1029         (gnu_xfer_partial): Likewise.
1030         * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1031         (ia64_hpux_xfer_solib_got): Likewise.
1032         (ia64_hpux_xfer_partial): Likewise.
1033         * ia64-linux-nat.c (ia64_linux_xfer_partial):
1034         * inf-ptrace.c (inf_ptrace_xfer_partial):
1035         * inf-ttrace.c (inf_ttrace_xfer_partial):
1036         * linux-nat.c (linux_xfer_siginfo): Likewise.
1037         (linux_nat_xfer_partial): Likewise.
1038         (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1039         (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1040         * monitor.c (monitor_xfer_memory): Likewise.
1041         (monitor_xfer_partial): Likewise.
1042         * procfs.c (procfs_xfer_partial): Likewise.
1043         * record-full.c (record_full_xfer_partial): Likewise.
1044         (record_full_core_xfer_partial): Likewise.
1045         * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
1046         instead of plongest.
1047         (gdbsim_xfer_partial): Likewise.
1048         * remote.c (remote_xfer_partial): Likewise.
1049         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1050         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1051         declaration.
1052         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1053         (rs6000_xfer_shared_libraries): Likewise.
1054         * sol-thread.c (sol_thread_xfer_partial): Likewise.
1055         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1056         (sparc_xfer_partial): Likewise.
1057         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1058         (spu_xfer_partial): Likewise.
1059         * spu-multiarch.c (spu_xfer_partial): Likewise.
1060         * target.c (target_read_live_memory): Likewise.
1061         (memory_xfer_live_readonly_partial): Likewise.
1062         (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1063         (target_xfer_partial, default_xfer_partial): Likewise.
1064         (current_xfer_partial): Likewise.
1065         * tracepoint.c (tfile_xfer_partial): Likewise.
1066         * windows-nat.c (windows_xfer_memory): Likewise.  Call
1067         pulongest instead of plongest.
1068         (windows_xfer_partial): Likewise.
1069         (windows_xfer_shared_libraries): Likewise.
1070
1071 2014-01-14  Yao Qi  <yao@codesourcery.com>
1072
1073         * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1074         target_xfer_partial_ftype.
1075
1076 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
1077
1078         PR python/15464
1079         PR python/16113
1080         * valops.c (value_struct_elt_bitpos): New function
1081         * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1082         object to 'None' if the field name is an empty string ("").
1083         * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1084         attribute to look for a field when 'name' is 'None'.
1085         (get_field_type): New function
1086
1087 2014-01-13  Doug Evans  <dje@google.com>
1088
1089         PR symtab/16426
1090         * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1091         (try_open_dwop_file): Ditto.
1092         * gdb_bfd.c: #include "vec.h".
1093         (bfdp): New typedef.
1094         (struct gdb_bfd_data): New member included_bfds.
1095         (gdb_bfd_unref): Unref all included bfds.
1096         (gdb_bfd_record_inclusion): New function.
1097         * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1098
1099 2014-01-13  Tom Tromey  <tromey@redhat.com>
1100
1101         * gdbcore.h (deprecated_core_resize_section_table): Remove.
1102
1103 2014-01-13  Tom Tromey  <tromey@redhat.com>
1104
1105         * defs.h (use_windows): Remove.
1106         * gdb.c (main): Update.
1107         * main.c (captured_main, gdb_main): Update.
1108         * main.h (struct captured_main_args) <use_windows>: Remove.
1109         * top.c (use_windows): Remove.
1110
1111 2014-01-13  Tom Tromey  <tromey@redhat.com>
1112
1113         * defs.h (deprecated_flush_hook): Remove.
1114
1115 2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1116
1117         PR threads/16216
1118         * linux-thread-db.c (try_thread_db_load): Add parameter
1119         check_auto_load_safe.  Move here the file_is_auto_load_safe call.
1120         (try_thread_db_load_from_pdir_1): Move it there from here.
1121         (try_thread_db_load_from_sdir): Update caller.
1122         (try_thread_db_load_from_dir): Move it there from here.
1123
1124 2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>
1125
1126         * regformats/regdat.sh: Always rewrite the register file.
1127
1128 2014-01-13  Pedro Alves  <palves@redhat.com>
1129
1130         * Makefile.in (CHECK_HEADERS): New variable.
1131         (check-headers:): New rule.
1132
1133 2014-01-13  Tom Tromey  <tromey@redhat.com>
1134
1135         * cli/cli-setshow.c (do_set_command): Update.
1136         * defs.h (deprecated_set_hook): Remove.
1137         * top.c (deprecated_set_hook): Remove.
1138
1139 2014-01-13  Pedro Alves  <palves@redhat.com>
1140
1141         * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1142         the tracepoint if the PC is a pseudo-register.
1143
1144 2014-01-13  Tom Tromey  <tromey@redhat.com>
1145
1146         * defs.h (XCALLOC): Remove.
1147         * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1148         (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1149         * dwarf2loc.c (allocate_piece_closure): Likewise.
1150         * elfread.c (elf_symfile_segments): Likewise.
1151         (elf_symfile_segments): Likewise.
1152         * gdbtypes.c (copy_type_recursive): Likewise.
1153         * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1154         * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1155         * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1156         XCALLOC.
1157         * mt-tdep.c (mt_gdbarch_init): Likewise.
1158         * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1159         XCALLOC.
1160         * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1161         * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1162         * registry.c (registry_alloc_data): Likewise.
1163         * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1164         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1165         * serial.c (serial_fdopen_ops): Likewise.
1166         * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1167         XCALLOC.
1168         * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1169         * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1170         not XCALLOC.
1171
1172 2014-01-13  Tom Tromey  <tromey@redhat.com>
1173
1174         * defs.h (XMALLOC): Remove.
1175         * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1176         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1177         * cli-out.c (struct ui_out *): Likewise.
1178         * cli/cli-dump.c (add_dump_command): Likewise.
1179         (add_dump_command): Likewise.
1180         * complaints.c (get_complaints): Likewise.
1181         (find_complaint): Likewise.
1182         * dwarf2-frame.c (execute_cfa_program): Likewise.
1183         * dwarf2read.c (abbrev_table_read_table): Likewise.
1184         * gdbarch.sh: Likewise.
1185         * gdbarch.c: Rebuild.
1186         * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1187         * interps.c (interp_new): Likewise.
1188         * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1189         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1190         * mi/mi-console.c (mi_console_file_new): Likewise.
1191         * mi/mi-interp.c (mi_interpreter_init): Likewise.
1192         * mi/mi-out.c (mi_out_new): Likewise.
1193         * mi/mi-parse.c (mi_parse): Likewise.
1194         * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1195         * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1196         * observer.c (xalloc_observer_list_node): Likewise.
1197         * regcache.c (regcache_xmalloc_1): Likewise.
1198         * reggroups.c (reggroup_new): Likewise.
1199         (_initialize_reggroup): Likewise.
1200         * registry.c (register_data_with_cleanup): Likewise.
1201         * remote.c (remote_notif_stop_alloc_reply): Likewise.
1202         * ser-base.c (serial_ttystate): Likewise.
1203         * ser-mingw.c (make_pipe_state): Likewise.
1204         * ser-pipe.c (pipe_open): Likewise.
1205         * serial.c (serial_open): Likewise.
1206         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1207         * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1208         (tui_alloc_win_info): Likewise.
1209         (tui_add_content_elements): Likewise.
1210         * tui/tui-file.c (tui_file_new): Likewise.
1211         * tui/tui-out.c (tui_out_new): Likewise.
1212         * ui-file.c (mem_file_new): Likewise.
1213         * ui-out.c (push_level): Likewise.
1214         (make_cleanup_ui_out_end): Likewise.
1215         (append_header_to_list): Likewise.
1216         (ui_out_new): Likewise.
1217         * user-regs.c (user_reg_add_builtin): Likewise.
1218
1219 2014-01-13  Tom Tromey  <tromey@redhat.com>
1220
1221         * defs.h (XZALLOC): Remove.
1222         * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1223         * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1224         (get_ada_tasks_inferior_data): Likewise.
1225         * auto-load.c (get_auto_load_pspace_data): Likewise.
1226         * auxv.c (get_auxv_inferior_data): Likewise.
1227         * bfd-target.c (target_bfd_reopen): Likewise.
1228         * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1229         (deprecated_insert_raw_breakpoint): Likewise.
1230         * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1231         * corelow.c (core_open): Likewise.
1232         * darwin-nat.c (darwin_check_new_threads): Likewise.
1233         (darwin_attach_pid): Likewise.
1234         * dummy-frame.c (dummy_frame_push): Likewise.
1235         * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1236         * dwarf2loc.c (allocate_piece_closure): Likewise.
1237         * elfread.c (elf_symfile_segments): Likewise.
1238         * eval.c (ptrmath_type_p): Likewise.
1239         * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1240         * gdbtypes.c (alloc_type_arch): Likewise.
1241         (alloc_type_instance): Likewise.
1242         * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1243         * inf-child.c (inf_child_can_use_agent): Likewise.
1244         * inflow.c (get_inflow_inferior_data): Likewise.
1245         * infrun.c (save_infcall_suspend_state): Likewise.
1246         * jit.c (jit_reader_load): Likewise.
1247         (get_jit_objfile_data): Likewise.
1248         (get_jit_program_space_data): Likewise.
1249         (jit_object_open_impl): Likewise.
1250         (jit_symtab_open_impl): Likewise.
1251         (jit_block_open_impl): Likewise.
1252         (jit_frame_sniffer): Likewise.
1253         * linux-fork.c (add_fork): Likewise.
1254         * maint.c (make_command_stats_cleanup): Likewise.
1255         * objfiles.c (get_objfile_pspace_data): Likewise.
1256         * opencl-lang.c (struct lval_closure): Likewise.
1257         * osdata.c (osdata_start_osdata): Likewise.
1258         * progspace.c (new_address_space): Likewise.
1259         (add_program_space): Likewise.
1260         * remote-sim.c (get_sim_inferior_data): Likewise.
1261         * sh-tdep.c (sh_gdbarch_init): Likewise.
1262         * skip.c (Ignore): Likewise.
1263         (skip_delete_command): Likewise.
1264         * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1265         (library_list_start_library): Likewise.
1266         (solib_aix_current_sos): Likewise.
1267         * solib-darwin.c (get_darwin_info): Likewise.
1268         (darwin_current_sos): Likewise.
1269         * solib-dsbt.c (get_dsbt_info): Likewise.
1270         * solib-ia64-hpux.c (new_so_list): Likewise.
1271         (ia64_hpux_get_solib_linkage_addr): Likewise.
1272         * solib-spu.c (append_ocl_sos): Likewise.
1273         (spu_current_sos): Likewise.
1274         * solib-svr4.c (get_svr4_info): Likewise.
1275         (svr4_keep_data_in_core): Likewise.
1276         (library_list_start_library): Likewise.
1277         (svr4_default_sos): Likewise.
1278         (svr4_read_so_list): Likewise.
1279         * solib-target.c (library_list_start_library): Likewise.
1280         (solib_target_current_sos): Likewise.
1281         * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1282         * symfile-debug.c (install_symfile_debug_logging): Likewise.
1283         * symfile.c (default_symfile_segments): Likewise.
1284         * target-descriptions.c (tdesc_data_init): Likewise.
1285         (tdesc_create_reg): Likewise.
1286         (struct tdesc_type *): Likewise.
1287         (tdesc_create_vector): Likewise.
1288         (tdesc_set_struct_size): Likewise.
1289         (struct tdesc_type *): Likewise.
1290         (tdesc_free_feature): Likewise.
1291         (tdesc_create_feature): Likewise.
1292         * windows-nat.c (windows_add_thread): Likewise.
1293         (windows_make_so): Likewise.
1294         * xml-support.c (gdb_xml_body_text): Likewise.
1295         (gdb_xml_create_parser_and_cleanup): Likewise.
1296         (xml_process_xincludes): Likewise.
1297         * xml-syscall.c (allocate_syscalls_info): Likewise.
1298         (syscall_create_syscall_desc): Likewise.
1299
1300 2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>
1301
1302         * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1303         function, with code from i386_stap_parse_special_token.
1304         (i386_stap_parse_special_token_three_arg_disp): Likewise.
1305         (i386_stap_parse_special_token): Move code to the two functions
1306         above; simplify it.
1307
1308 2014-01-09  Pedro Alves  <palves@redhat.com>
1309             Hui Zhu  <hui@codesourcery.com>
1310
1311         PR gdb/16101
1312         * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1313         bp_err_string.  Don't mark the location shlib_disabled if the
1314         error thrown wasn't a generic or memory error.  Catch errors
1315         thrown while inserting breakpoints in overlayed code.  Output
1316         error message of software breakpoints.
1317         * remote.c (remote_insert_breakpoint): If this breakpoint has
1318         target-side commands but this stub doesn't support Z0 packets,
1319         throw NOT_SUPPORTED_ERROR error.
1320         * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1321         * target.h (target_insert_breakpoint): Extend comment.
1322         (target_insert_hw_breakpoint): Add comment.
1323
1324 2014-01-08  Pedro Alves  <palves@redhat.com>
1325
1326         * remote.c (remote_add_thread): Add threads silently if starting
1327         up.
1328         (remote_notice_new_inferior): If in all-stop, and starting up,
1329         don't call notice_new_inferior.
1330         (get_current_thread): New function, factored out from ...
1331         (add_current_inferior_and_thread): ... this.  Adjust.
1332         (remote_start_remote) <all-stop>: Fetch the thread list.  If we
1333         found any thread, then select the remote's current thread as GDB's
1334         current thread too.
1335
1336 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1337
1338         * NEWS: Create a new section for the next release branch.
1339         Rename the section of the current branch, now that it has
1340         been cut.
1341
1342 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1343
1344         GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1345         * version.in: Bump version to 7.7.50.DATE-cvs.
1346
1347 2014-01-08  Yao Qi  <yao@codesourcery.com>
1348
1349         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1350         type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
1351         (spu_xfer_partial): Cast 'buf' to 'const char *'.
1352
1353 2014-01-08  Yao Qi  <yao@codesourcery.com>
1354
1355         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1356         return value of bfd_get_filename to symbol_file_add_from_bfd.
1357
1358 2014-01-08  Pierre Muller  <muller@sourceware.org>
1359
1360         Fix PR16201.
1361         * coff-pe-read.c (struct read_pe_section_data): Add index field.
1362         (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1363         to prim_record_mininal_symbol_and_info.
1364         (add_pe_forwarded_sym): Use known section number of forwarded symbol
1365         in call to prim_record_minimal_symbol_and_info.
1366         (read_pe_exported_syms): Set index field of section_data.
1367
1368 2014-01-07  Andrew Pinski  <apinski@cavium.com>
1369
1370         * features/aarch64-core.xml (cpsr): Change to be 64bit.
1371         * features/aarch64.c: Regenerate.
1372
1373 2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>
1374
1375         * target.c (return_null): Define.
1376         (update_current_target): Use it instead of return_zero for
1377         functions that return a pointer.
1378
1379 2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
1380
1381         * source.c (add_path): Fix check for duplicated paths in the previously
1382         included paths.
1383
1384 2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>
1385
1386         * ada-lang.c: Remove duplicated include statements.
1387         * alphabsd-nat.c: Ditto.
1388         * amd64-darwin-tdep.c: Ditto.
1389         * amd64fbsd-nat.c: Ditto.
1390         * auto-load.c: Ditto.
1391         * ax-gdb.c: Ditto.
1392         * breakpoint.c: Ditto.
1393         * dbxread.c: Ditto.
1394         * fork-child.c: Ditto.
1395         * gdb_usleep.c: Ditto.
1396         * i386-darwin-tdep.c: Ditto.
1397         * i386fbsd-nat.c: Ditto.
1398         * infcmd.c: Ditto.
1399         * inferior.c: Ditto.
1400         * jv-lang.c: Ditto.
1401         * linux-nat.c: Ditto.
1402         * linux-tdep.c: Ditto.
1403         * m68kbsd-nat.c: Ditto.
1404         * m68klinux-nat.c: Ditto.
1405         * microblaze-tdep.c: Ditto.
1406         * mips-linux-tdep.c: Ditto.
1407         * mn10300-tdep.c: Ditto.
1408         * nto-tdep.c: Ditto.
1409         * opencl-lang.c: Ditto.
1410         * osdata.c: Ditto.
1411         * printcmd.c: Ditto.
1412         * regcache.c: Ditto.
1413         * remote-m32r-sdi.c: Ditto.
1414         * remote.c: Ditto.
1415         * symfile.c: Ditto.
1416         * symtab.c: Ditto.
1417         * tilegx-linux-nat.c: Ditto.
1418         * tilegx-tdep.c: Ditto.
1419         * tracepoint.c: Ditto.
1420         * valops.c: Ditto.
1421         * vaxbsd-nat.c: Ditto.
1422         * windows-nat.c: Ditto.
1423         * xtensa-tdep.c: Ditto.
1424
1425 2014-01-07  Yao Qi  <yao@codesourcery.com>
1426
1427         * spu-linux-nat.c (_initialize_spu_nat): Declare.
1428
1429 2014-01-07  Yao Qi  <yao@codesourcery.com>
1430             Joel Brobecker  <brobecker@adacore.com>
1431
1432         * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1433         (pdc_write_regs): Likewise.
1434         (fetch_regs_kernel_thread): Likewise.
1435         (store_regs_kernel_thread): Likewise.
1436
1437 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1438
1439         * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1440         tagged type objects to their actual type.
1441
1442 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1443
1444         * ada-valprint.c (print_field_values): Add "language" parameter.
1445         Update calls to print_field_values and print_variant_part.
1446         Pass new parameter "language" in call to val_print instead
1447         of "current_language".  Replace call to ada_val_print by call
1448         to val_print.
1449         (print_variant_part): Add "language" parameter.
1450         (ada_val_print_struct_union): Update call to print_field_values.
1451
1452 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1453
1454         * ada-valprint.c (ui_memcpy): Delete.
1455         (ada_print_floating): Update documentation.  Add empty line
1456         between between function documentation and implementation.
1457         Delete variable "buffer".  Use ui_file_xstrdup in place of
1458         ui_file_put.  Minor adjustments following this change.
1459
1460 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1461
1462         * ada-valprint.c (ada_val_print_string): New function,
1463         extracted from ada_val_print_array.
1464         (ada_val_print_array): Replace extracted code by call
1465         to ada_val_print_string followed by a return.  Move
1466         "else" branch to the function's top block.
1467
1468 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1469
1470         * ada-valprint.c (ada_val_print_array): Move implementation
1471         down.  Rename parameter "offset" and "val" into "offset_aligned"
1472         and "original_value" respectively.  Add parameter "offset".
1473
1474 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1475
1476         * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1477         re-organizing the code. Change the "???" message printed
1478         when target type is a TYPE_CODE_UNDEF into
1479         "<ref to undefined type>".
1480
1481 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1482
1483         * ada-valprint.c (print_record): Delete, implementation inlined...
1484         (ada_val_print_struct_union): ... here.  Remove call to
1485         ada_check_typedef in inlined implementation.
1486
1487 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1488
1489         * ada-valprint.c (ada_val_print_gnat_array): New function,
1490         extracted from ada_val_print_1;
1491         (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1492         (ada_val_print_flt, ada_val_print_struct_union)
1493         (ada_val_print_ref): Likewise.
1494         (ada_val_print_1): Delete variables i and elttype.
1495         Replace extracted-out code by call to corresponding
1496         new functions.
1497
1498 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1499
1500         * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1501
1502 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1503
1504         * ada-valprint.c (ada_val_print_1): Replace calls to
1505         ada_val_print_1 by calls to val_print.
1506
1507 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1508
1509         * ada-valprint.c (ada_val_print_1): Add parameter "language".
1510         Update calls to self accordingly.  Replace calls to c_val_print
1511         by calls to val_print.
1512
1513 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1514
1515         * ada-valprint.c (print_record): Delete declaration.
1516         (adjust_type_signedness, ada_val_print_1): Likewise.
1517         (ada_val_print): Move function implementation down.
1518         (print_variant_part, print_field_values, print_record):
1519         Move function implementation up.
1520
1521 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1522
1523         * python/py-type.c (typy_get_name): New function.
1524         (type_object_getset): Add entry for attribute "name".
1525         * NEWS: Add entry mentioning this new attribute.
1526
1527 2014-01-07  Yao Qi  <yao@codesourcery.com>
1528
1529         * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1530         statement.
1531
1532 2014-01-07  Yao Qi  <yao@codesourcery.com>
1533
1534         * gnu-nat.c (info_port_rights): Add qualifier const to
1535         argument args.
1536
1537 2014-01-07  Yao Qi  <yao@codesourcery.com>
1538
1539         * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1540
1541 2014-01-07  Yao Qi  <yao@codesourcery.com>
1542
1543         * gnu-nat.c (make_inf) Update declaration.
1544         (make_inf): Make it static.
1545         (inf_set_traced): Likewise.
1546         (inf_port_to_thread, inf_task_died_status): Likewise.
1547
1548 2014-01-07  Yao Qi  <yao@codesourcery.com>
1549
1550         * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1551
1552 2014-01-07  Yao Qi  <yao@codesourcery.com>
1553
1554         * gnu-nat.c (_initialize_gnu_nat): Declare.
1555
1556 2014-01-07  Yao Qi  <yao@codesourcery.com>
1557
1558         * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1559         'enum bfd_endian'.
1560         (struct gdbarch_info) <byte_order>: Change type to
1561         'enum bfd_endian'.
1562         <byte_order_for_code>: Likewise.
1563         * gdbarch.c, gdbarch.h: Regenerated.
1564
1565 2014-01-06  Sasha Smundak  <asmundak@google.com>
1566
1567         * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1568
1569 2014-01-06  Tom Tromey  <tromey@redhat.com>
1570
1571         * doublest.c (convert_doublest_to_floatformat): Use const, not
1572         CONST.
1573         * somread.c (som_symtab_read): Likewise.
1574
1575 2014-01-07  Hui Zhu  <hui@codesourcery.com>
1576
1577         * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1578         (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1579         (gdb_bfd_fopen): Ditto.
1580         (gdb_bfd_openr): Ditto.
1581         (gdb_bfd_openw): Ditto.
1582         (gdb_bfd_openr_iovec): Ditto.
1583         (gdb_bfd_fdopenr): Ditto.
1584         * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1585         * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1586         with xstrdup.
1587         * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1588         with xstrdup.
1589         * symfile-mem.c (symbol_file_add_from_memory): Removed
1590         gdb_bfd_stash_filename.
1591
1592 2014-01-03  Doug Evans  <dje@google.com>
1593
1594         * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1595         output.
1596
1597 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1598
1599         Update year range in copyright notice of all files.
1600
1601 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1602
1603         * top.c (print_gdb_version): Set copyright year to 2014.
1604
1605 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1606
1607         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1608
1609 For older changes see ChangeLog-2013.
1610 \f
1611 Local Variables:
1612 mode: change-log
1613 left-margin: 8
1614 fill-column: 74
1615 version-control: never
1616 coding: utf-8
1617 End: