1 2012-02-27 Maciej W. Rozycki <macro@codesourcery.com>
3 * mips-linux-tdep.c (mips_linux_init_abi): Set num_pseudo_regs
6 2012-02-27 Thomas Schwinge <thomas@codesourcery.com>
8 * sh-tdep.c (sh_make_stub_cache, sh_stub_this_id)
9 (sh_stub_unwind_sniffer): New functions.
10 (sh_stub_unwind): New variable.
11 (sh_gdbarch_init): Wire everything.
13 2012-02-27 Pedro Alves <palves@redhat.com>
15 * linux-nat.c (pid_is_stopped): Delete, moved to common/.
16 (linux_nat_post_attach_wait): Adjust to use
17 linux_proc_pid_is_stopped.
18 * common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
19 * common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
20 based on pid_is_stopped from both linux-nat.c and
21 gdbserver/linux-low.c, and renamed.
23 2012-02-24 Maciej W. Rozycki <macro@codesourcery.com>
25 * remote.c (remote_watchpoint_addr_within_range): New function.
26 (init_remote_ops): Use it.
28 2012-02-24 Maciej W. Rozycki <macro@codesourcery.com>
30 * target.h (target_watchpoint_addr_within_range): Document macro.
32 2012-02-24 Pedro Alves <palves@redhat.com>
34 * stack.c (set_last_displayed_sal): Issue internal_error instead
35 of warning, and issue it after clearing the last displayed sal.
37 2012-02-24 Jan Kratochvil <jan.kratochvil@redhat.com>
38 Pedro Alves <palves@redhat.com>
40 * breakpoint.c (until_break_command): Install breakpoints after
41 all frame manipulations.
43 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
45 * remote.c (remote_supports_cond_breakpoints): New forward
47 (remote_add_target_side_condition): New function.
48 (remote_insert_breakpoint): Add target-side breakpoint
49 conditional if supported.
50 (remote_insert_hw_breakpoint): Likewise.
51 (init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
54 * target.c (update_current_target): Inherit
55 to_supports_evaluation_of_breakpoint_conditions.
56 Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
58 * target.h (struct target_ops)
59 <to_supports_evaluation_of_breakpoint_conditions>: New field.
60 (target_supports_evaluation_of_breakpoint_conditions): New #define.
62 * breakpoint.c (get_first_locp_gte_addr): New forward declaration.
63 (condition_evaluation_both, condition_evaluation_auto,
64 condition_evaluation_host, condition_evaluation_target,
65 condition_evaluation_enums, condition_evaluation_mode_1,
66 condition_evaluation_mode): New static globals.
67 (translate_condition_evaluation_mode): New function.
68 (breakpoint_condition_evaluation_mode): New function.
69 (gdb_evaluates_breakpoint_condition_p): New function.
70 (ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
71 (mark_breakpoint_modified): New function.
72 (mark_breakpoint_location_modified): New function.
73 (set_condition_evaluation_mode): New function.
74 (show_condition_evaluation_mode): New function.
75 (bp_location_compare_addrs): New function.
76 (get_first_location_gte_addr): New helper function.
77 (set_breakpoint_condition): Free condition bytecode if locations
78 has become unconditional. Call mark_breakpoint_modified (...).
79 (condition_command): Call update_global_location_list (1) for
81 (breakpoint_xfer_memory): Use is_breakpoint (...).
82 (is_breakpoint): New function.
83 (parse_cond_to_aexpr): New function.
84 (build_target_condition_list): New function.
85 (insert_bp_location): Handle target-side conditional
86 breakpoints and call build_target_condition_list (...).
87 (update_inserted_breakpoint_locations): New function.
88 (insert_breakpoint_locations): Handle target-side conditional
90 (bpstat_check_breakpoint_conditions): Add comment.
91 (bp_condition_evaluator): New function.
92 (bp_location_condition_evaluator): New function.
93 (print_breakpoint_location): Print information on where the condition
95 (print_one_breakpoint_location): Likewise.
96 (init_bp_location): Call mark_breakpoint_location_modified (...) for
98 (force_breakpoint_reinsertion): New functions.
99 (update_global_location_list): Handle target-side breakpoint
101 Reinsert locations that are already inserted if conditions have
103 (bp_location_dtor): Free agent expression bytecode.
104 (disable_breakpoint): Call mark_breakpoint_modified (...).
105 Call update_global_location_list (...) with parameter 1 for breakpoints.
106 (disable_command): Call mark_breakpoint_location_modified (...).
107 Call update_global_location_list (...) with parameter 1 for breakpoints.
108 (enable_breakpoint_disp): Call mark_breakpoint_modified (...).
109 (enable_command): mark_breakpoint_location_modified (...).
110 (_initialize_breakpoint): Update documentation and add
111 condition-evaluation breakpoint subcommand.
113 * breakpoint.h: Include ax.h.
114 (condition_list): New data structure.
115 (condition_status): New enum.
116 (bp_target_info) <cond_list>: New field.
117 (bp_location) <condition_changed, cond_bytecode>: New fields.
118 (is_breakpoint): New prototype.
120 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
122 * remote.c (remote_state) <cond_breakpoints>: New field.
123 (PACKET_ConditionalBreakpoints): New enum.
124 (remote_cond_breakpoint_feature): New function.
125 (remote_protocol_features): Add new ConditionalBreakpoints entry.
126 (remote_supports_cond_breakpoints): New function.
127 (_initialize_remote): Add new packet configuration for
128 target-side conditional breakpoints.
130 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
132 * NEWS: Mention target-side conditional breakpoint support,
133 new condition-evaluation breakpoint subcommand and remote
136 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
138 * breakpoint.c (bp_location_compare): Sort by pspace before sorting by
141 2012-02-24 Thomas Schwinge <thomas@codesourcery.com>
143 * sh-tdep.c (sh_skip_prologue): Use skip_prologue_using_sal.
144 (after_prologue): Remove.
146 2012-02-23 Tom Tromey <tromey@redhat.com>
148 * jv-valprint.c (java_val_print): Remove dead code.
150 2012-02-23 Tristan Gingold <gingold@adacore.com>
152 * ada-tasks.c (struct ada_tasks_inferior_data): Add
153 known_tasks_element and known_tasks_length fields.
154 (read_known_tasks_array): Change argument type. Use pointer type
155 and number of elements from DATA. Adjust.
156 (read_known_tasks_list): Likewise.
157 (get_known_tasks_addr): Remove.
158 (ada_set_current_inferior_known_tasks_addr): Renamed to ...
159 (ada_tasks_inferior_data_sniffer): ... this. Use symtab for element
160 type and array length. Merge former get_known_tasks_addr code.
162 2012-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
165 * infcmd.c (finish_forward): New variable frame_id, initialize it, use
166 it after set_momentary_breakpoint.
168 2012-02-22 Sterling Augustine <saugustine@google.com>
171 * breakpoint.c (watchpoint_exp_is_constant): Add UNOP_CAST to switch.
173 2012-02-22 Gary Benson <gbenson@redhat.com>
175 * dwarf2read.c (dwarf2_read_index): Correct misspelling.
176 (find_slot_in_mapped_hash): Likewise.
178 2012-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
181 * configure.ac (MAKEINFO): Replace AC_CHECK_PROG by AC_ARG_VAR.
182 (MAKEINFOFLAGS): Replace static string by AC_ARG_VAR.
183 * configure: Regenerate.
185 2012-02-21 Tristan Gingold <gingold@adacore.com>
186 Pedro Alves <palves@redhat.com>
188 * ia64-tdep.c: Do not include libunwind-ia64.h.
189 * libunwind-frame.h: Remove #ifdef HAVE_LIBUNWIND_H guard.
190 Include libunwind-ia64.h instead of libunwind.h.
191 * configure.ac (--with-libunwind, $enable_libunwind): Don't check
192 for libunwind.h existence.
193 * configure, config.in: Regenerate.
195 2012-02-21 Anton Gorenkov <xgsa@yandex.ru>
197 * c-valprint.c (c_value_print): Use value_rtti_indirect_type
198 instead of value_rtti_target_type.
199 * eval.c (evaluate_subexp_standard): Use value_rtti_indirect_type
200 instead of value_rtti_target_type.
201 * typeprint.c (whatis_exp): Use value_rtti_indirect_type instead of
202 value_rtti_target_type.
203 * valops.c (value_ind): Extract function readjust_indirect_value_type.
204 (value_rtti_target_type): Rename to ...
205 (value_rtti_indirect_type): ... here and make it indirect. Update
207 * value.c (readjust_indirect_value_type): New function.
208 (coerce_ref): Support for enclosing type setting for references
209 with readjust_indirect_value_type.
210 * value.h (readjust_value_type): New declaration.
211 (value_rtti_target_type): Rename to ...
212 (value_rtti_indirect_type): ... here.
214 2012-02-21 Anton Gorenkov <xgsa@yandex.ru>
216 * MAINTAINERS (Write After Approval): Add myself to the list.
218 2012-02-20 Doug Evans <dje@google.com>
220 * objfiles.c (add_to_objfile_sections): Remove outdated comments.
221 Rename objfile_p_char parameter to objfilep.
222 (build_objfile_section_table): Result is now void. All callers
224 * objfiles.h (struct objfile): Tweak comments, whitespace.
225 (build_objfile_section_table): Update.
227 * elfread.c (elf_symfile_segments): Fix warning text.
229 2012-02-20 Tom Tromey <tromey@redhat.com>
232 * dwarf2read.c (dw2_expand_symtabs_matching): Only visit a
233 particular set of file names once.
234 (dw2_map_symbol_filenames): Likewise.
236 2012-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
239 * main.c (write_files): Remove the declaration.
240 (external_editor_command): Move the declaration ...
241 [GDBTK] (external_editor_command): ... here. Fix the comment.
243 2012-02-20 Tom Tromey <tromey@redhat.com>
245 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove
248 2012-02-20 Tristan Gingold <gingold@adacore.com>
250 * darwin-nat.h (enum darwin_msg_state): Add comments.
252 2012-02-20 Tristan Gingold <gingold@adacore.com>
254 * amd64-darwin-tdep.c (x86_darwin_init_abi_64): Fix jb_pc_offset
257 2012-20-18 Joel Brobecker <brobecker@adacore.com>
259 * breakpoint.c (watchpoint_exp_is_const): Add missing empty line
260 between function description and implementation.
262 2012-02-17 Tom Tromey <tromey@redhat.com>
265 * python/py-event.c (event_object_getset): New global.
266 (event_object_type): Reference it.
267 * python/py-type.c (field_object_getset): New global.
268 (field_object_type): Reference it.
269 * python/python-internal.h (gdb_py_generic_dict): Declare.
270 * python/py-utils.c (gdb_py_generic_dict): New function.
272 2012-02-17 Tristan Gingold <gingold@adacore.com>
274 * solib-darwin.c (darwin_current_sos): Check magic and filetype
276 2012-02-17 Thomas Schwinge <thomas@codesourcery.com>
278 * sh-tdep.c (sh_is_renesas_calling_convention): Fix handling of
279 TYPE_CALLING_CONVENTION annotation.
281 2012-02-16 Kevin Buettner <kevinb@redhat.com>
283 * MAINTAINERS: Add rx to target ISA section.
284 * Makefile.in (ALL_TARGET_OBS): Add rx-tdep.o.
285 (ALLDEPFILES): Add rx-tdep.c.
287 2012-02-16 Tom Tromey <tromey@redhat.com>
289 * symfile.c (symbol_file_add_main_1): Use inferior's
291 * solib.c (solib_read_symbols): Use inferior's symfile_flags.
292 * linux-nat.c (linux_child_follow_fork): Set symfile_flags on
294 * infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on
296 (follow_exec): Use inferior's symfile_flags.
297 * inferior.h (struct inferior) <symfile_flags>: New field.
299 2012-02-16 Mike Frysinger <vapier@gentoo.org>
302 * remote-sim.c (gdbsim_create_inferior): Call error() when
303 sim_create_inferior() fails.
305 2012-02-16 Josh Matthews <josh@joshmatthews.net>
307 * machoread.c: Initialize nbr_syms to avoid warnings-as-errors failure.
309 2012-02-16 Tom Tromey <tromey@redhat.com>
312 * thread.c (struct current_thread_cleanup) <was_removable>: New
314 (restore_current_thread_cleanup_dtor): Restore 'removable' field.
315 (make_cleanup_restore_current_thread): Initialize new field.
317 2012-02-15 Kevin Buettner <kevinb@redhat.com>
319 * MAINTAINERS: Add rl78 to target ISA section.
320 * Makefile.in (ALL_TARGET_OBS): Add rl78-tdep.o.
321 (ALLDEPFILES): Add rl78-tdep.c.
322 * NEWS: Mention rl78 as a new target.
324 2012-02-15 Aleksandar Ristovski <aristovski@qnx.com>
326 * frame.c (find_frame_sal): Initialize sal->pspace field from frame
328 * stack.c (set_last_displayed_sal): Validate that PSPACE is not NULL.
330 2012-02-15 Tom Tromey <tromey@redhat.com>
333 * infcmd.c (registers_info): Print just the current register's
336 2012-02-15 Tom Tromey <tromey@redhat.com>
338 * python/py-symbol.c (sympy_value): Use _().
340 2012-02-15 Pedro Alves <palves@redhat.com>
342 * remote.c (remote_detach_1, extended_remote_attach_1): Tweak
343 output to be like native targets'.
344 (remote_pid_to_str): Special case the null ptid.
346 2012-02-14 Stan Shebs <stan@codesourcery.com>
348 * NEWS: Mention enable count command.
349 * breakpoint.h (struct breakpoint): New field enable_count.
350 * breakpoint.c (enable_breakpoint_disp): Add count argument.
351 (enable_breakpoint): Add arg to call.
352 (struct disp_data): New struct.
353 (do_enable_breakpoint_disp): Interp arg as disp_data and unpack.
354 (do_map_enable_once_breakpoint): Create a struct and pass it.
355 (do_map_enable_delete_breakpoint): Ditto.
356 (do_map_enable_count_breakpoint): New function.
357 (enable_count_command): New function.
358 (bpstat_stop_status): Decrement enable_count.
359 (print_one_breakpoint_location): Report enable count.
360 (_initialize_breakpoint): Add enable count command.
362 2012-02-14 Kevin Buettner <kevinb@redhat.com>
364 * rl78-tdep.c (reggroups.h): Include.
365 (RL78_RAW_BANK0_R0_REGNUM, RL78_RAW_BANK0_R1_REGNUM)
366 (RL78_RAW_BANK0_R2_REGNUM, RL78_RAW_BANK0_R3_REGNUM)
367 (RL78_RAW_BANK0_R4_REGNUM, RL78_RAW_BANK0_R5_REGNUM)
368 (RL78_RAW_BANK0_R6_REGNUM, RL78_RAW_BANK0_R7_REGNUM)
369 (RL78_RAW_BANK1_R0_REGNUM, RL78_RAW_BANK1_R1_REGNUM)
370 (RL78_RAW_BANK1_R2_REGNUM, RL78_RAW_BANK1_R3_REGNUM)
371 (RL78_RAW_BANK1_R4_REGNUM, RL78_RAW_BANK1_R5_REGNUM)
372 (RL78_RAW_BANK1_R6_REGNUM, RL78_RAW_BANK1_R7_REGNUM)
373 (RL78_RAW_BANK2_R0_REGNUM, RL78_RAW_BANK2_R1_REGNUM)
374 (RL78_RAW_BANK2_R2_REGNUM, RL78_RAW_BANK2_R3_REGNUM)
375 (RL78_RAW_BANK2_R4_REGNUM, RL78_RAW_BANK2_R5_REGNUM)
376 (RL78_RAW_BANK2_R6_REGNUM, RL78_RAW_BANK2_R7_REGNUM)
377 (RL78_RAW_BANK3_R0_REGNUM, RL78_RAW_BANK3_R1_REGNUM)
378 (RL78_RAW_BANK3_R2_REGNUM, RL78_RAW_BANK3_R3_REGNUM)
379 (RL78_RAW_BANK3_R4_REGNUM, RL78_RAW_BANK3_R5_REGNUM)
380 (RL78_RAW_BANK3_R6_REGNUM, RL78_RAW_BANK3_R7_REGNUM): Add to
381 beginning of register list.
382 (RL78_BANK0_R0_REGNUM, RL78_BANK0_R1_REGNUM, RL78_BANK0_R2_REGNUM)
383 (RL78_BANK0_R3_REGNUM, RL78_BANK0_R4_REGNUM, RL78_BANK0_R5_REGNUM)
384 (RL78_BANK0_R6_REGNUM, RL78_BANK0_R7_REGNUM, RL78_BANK1_R0_REGNUM)
385 (RL78_BANK1_R1_REGNUM, RL78_BANK1_R2_REGNUM, RL78_BANK1_R3_REGNUM)
386 (RL78_BANK1_R4_REGNUM, RL78_BANK1_R5_REGNUM, RL78_BANK1_R6_REGNUM)
387 (RL78_BANK1_R7_REGNUM, RL78_BANK2_R0_REGNUM, RL78_BANK2_R1_REGNUM)
388 (RL78_BANK2_R2_REGNUM, RL78_BANK2_R3_REGNUM, RL78_BANK2_R4_REGNUM)
389 (RL78_BANK2_R5_REGNUM, RL78_BANK2_R6_REGNUM, RL78_BANK2_R7_REGNUM)
390 (RL78_BANK3_R0_REGNUM, RL78_BANK3_R1_REGNUM, RL78_BANK3_R2_REGNUM)
391 (RL78_BANK3_R3_REGNUM, RL78_BANK3_R4_REGNUM, RL78_BANK3_R5_REGNUM)
392 (RL78_BANK3_R6_REGNUM, RL78_BANK3_R7_REGNUM): Move these into
393 the pseudo registers. Rearrange other pseudo registers too so
394 that the bank registers appear at the end.
395 (rl78_register_type): Account for the fact that the byte sized
396 bank registers are now pseudo-registers.
397 (rl78_register_name): Rearrange the register name array. Make
398 initial set of raw banked registers inaccessible.
399 (rl78_register_reggroup_p, rl78_register_sim_regno): New functions.
400 (rl78_pseudo_register_read, rl78_pseudo_register_write): Add
401 case for copying bytes back and forth between raw and pseudo
402 versions of the banked registers. Update other cases to reflect
404 (rl78_return_value): Update to account for changed names of
406 (rl78_gdbarch_init): Register rl78_register_reggroup_p() and
407 rl78_register_sim_regno().
409 2012-02-14 Kevin Buettner <kevinb@redhat.com>
411 * rl78-tdep.c (rl78_skip_prologue): Make `const' the type of
412 the name parameter being passed to find_pc_partial_function().
414 2012-02-14 Jan Kratochvil <jan.kratochvil@redhat.com>
416 * MAINTAINERS: Step down from being ia64 target maintainer.
418 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
420 * ppc-linux-nat.c (fetch_register, store_register): Fix GCC aliasing
423 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
425 Fix crash on loaded shlibs without loaded exec_bfd.
426 * exec.c (exec_files_info): Do not crash on NULL EXEC_BFD.
427 (set_section_command): Replace exec_bfd by p->bfd.
429 2012-02-10 Tom Tromey <tromey@redhat.com>
431 * linespec.c (decode_line_internal): Skip symtabs_from_filename
432 when we have a C++ qualified name.
434 2012-02-10 Pedro Alves <palves@redhat.com>
436 * inferior.c (inferior_pid_to_str): New.
437 (print_inferior, inferior_command): Use it.
439 2012-02-10 Pedro Alves <palves@redhat.com>
441 * configure.ac (HAVE_ELF test): Put the old CFLAGS at the end of
443 * configure: Regenerate.
445 2012-02-10 Jan Kratochvil <jan.kratochvil@redhat.com>
447 * linespec.c (decode_line_internal): Fix comment correctness.
449 2012-02-09 Valery Khromov <valery.khromov@gmail.com>
452 * Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h.
453 * amd64bsd-nat.c: Add support for debug registers (adapted from
455 [HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set)
456 (amd64bsd_dr_set_control, amd64bsd_dr_set_addr)
457 (amd64bsd_dr_get_addr, amd64bsd_dr_get_status)
458 (amd64bsd_dr_get_control): New functions.
459 * amd64bsd-nat.h: New file (adapted from i386bsd-nat.h).
460 * amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h".
461 [HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware
462 watchpoints initialization.
463 * config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o.
465 2012-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
467 * gdb-gdb.py (StructMainTypePrettyPrinter) <struct_field_img>: Print
469 (StructMainTypePrettyPrinter) <bounds_img>: Print flds_bnds.bounds.
471 2012-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
473 * breakpoint.c (bp_location_compare): Fix comment. Reindent the code.
475 2012-02-08 Joel Brobecker <brobecker@adacore.com>
477 * language.h (symbol_name_cmp_ftype): Renames
478 symbol_name_match_p_ftype.
479 (struct language_defn)[la_get_symbol_name_cmp]: Renames
480 la_get_symbol_name_match_p.
481 * ada-lang.c (ada_get_symbol_name_cmp): Renames
482 ada_get_symbol_name_match_p. Update comment.
483 (ada_language_defn)[la_get_symbol_name_cmp]: Update value.
484 * linespec.c (struct symbol_matcher_data)[symbol_name_cmp]:
485 Renames symbol_name_match_p. Update field type.
486 (iterate_name_matcher, iterate_over_all_matching_symtabs): Adjust.
487 * c-lang.c, d-lang.c, f-lang.c, jv-lang.c, m2-lang.c, objc-lang.c,
488 opencl-lang.c, p-lang.c: Replace "la_get_symbol_name_match_p" by
489 "la_get_symbol_name_cmp" in comments.
490 * language.c: Likewise.
492 2012-02-08 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
494 * amd64-sol2-tdep.c (amd64_sol2_gregset_reg_offset): Correct
496 * i386-sol2-nat.c (amd64_sol2_gregset64_reg_offs)
497 (amd64_sol2_gregset32_reg_offs): Likewise.
499 2012-02-08 Joel Brobecker <brobecker@adacore.com>
501 * solib-darwin.c (darwin_bfd_open): Make sure that the filename
502 of the returned BFD is allocated by GDB.
504 2012-02-07 Tom Tromey <tromey@redhat.com>
507 * python/python-internal.h (frame_object_type): Declare.
508 * python/py-symbol.c (sympy_needs_frame): New function.
509 (sympy_value): New function.
510 (symbol_object_getset): Add "needs_frame".
511 (symbol_object_methods): Add "value".
512 * python/py-frame.c (frame_object_type): No longer static.
514 2012-02-07 Tom Tromey <tromey@redhat.com>
517 * python/py-symbol.c (sympy_line): New function.
518 (symbol_object_getset): Add "line".
520 2012-02-07 Tom Tromey <tromey@redhat.com>
522 * charset.c (find_charset_names): Check 'in' against NULL.
524 2012-02-06 Doug Evans <dje@google.com>
526 * gdbtypes.h (struct main_type): Change type of name,tag_name,
527 and fields.name members from char * to const char *. All uses updated.
528 (struct cplus_struct_type): Change type of fn_fieldlists.name member
529 from char * to const char *. All uses updated.
530 (type_name_no_tag): Update.
531 (lookup_unsigned_typename, lookup_signed_typename): Update.
532 * gdbtypes.c (type_name_no_tag): Change result type
533 from char * to const char *. All callers updated.
534 (lookup_unsigned_typename, lookup_signed_typename): Change type of
535 name parameter from char * to const char *.
536 * symtab.h (struct cplus_specific): Change type of demangled_name
537 member from char * to const char *. All uses updated.
538 (struct general_symbol_info): Change type of name and
539 mangled_lang.demangled_name members from char * to const char *.
541 (symbol_get_demangled_name, symbol_natural_name): Update.
542 (symbol_demangled_name, symbol_search_name): Update.
543 * symtab.c (symbol_get_demangled_name): Change result type
544 from char * to const char *. All callers updated.
545 (symbol_natural_name, symbol_demangled_name): Ditto.
546 (symbol_search_name): Ditto.
547 (completion_list_add_name): Change type of symname,sym_text,
548 text,word parameters from char * to const char *.
549 (completion_list_objc_symbol): Change type of sym_text,
550 text,word parameters from char * to const char *.
551 * ada-lang.c (find_struct_field): Change type of name parameter
552 from char * to const char *.
553 (encoded_ordered_before): Similarly for N0,N1 parameters.
554 (old_renaming_is_invisible): Similarly for function_name parameter.
555 (ada_type_name): Change result type from char * to const char *.
557 * ada-lang.h (ada_type_name): Update.
558 * buildsym.c (hashname): Change type of name parameter
559 from char * to const char *.
560 * buildsym.h (hashname): Update.
561 * dbxread.c (end_psymtab): Change type of include_list parameter
562 from char ** to const char **.
563 * dwarf2read.c (determine_prefix): Change result type
564 from char * to const char *. All callers updated.
565 * f-lang.c (find_common_for_function): Change type of name, funcname
566 parameters from char * to const char *.
567 * f-lang.c (find_common_for_function): Update.
568 * f-valprint.c (list_all_visible_commons): Change type of funcname
569 parameters from char * to const char *.
570 * gdbarch.sh (static_transform_name): Change type of name parameter
571 and result from char * to const char *.
572 * gdbarch.c: Regenerate.
573 * gdbarch.h: Regenerate.
574 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type
575 of name parameter from char * to const char *.
576 * jv-lang.c (java_primitive_type_from_name): Ditto.
577 (java_demangled_signature_length): Similarly for signature parameter.
578 (java_demangled_signature_copy): Ditto.
579 (java_demangle_type_signature): Ditto.
580 * jv-lang.h (java_primitive_type_from_name): Update.
581 (java_demangle_type_signature): Update.
582 * objc-lang.c (specialcmp): Change type of a,b parameters
583 from char * to const char *.
584 * p-lang.c (is_pascal_string_type): Change type of arrayname parameter
585 from char * to const char *. All callers updated.
586 * p-lang.h (is_pascal_string_type): Update.
587 * solib-frv.c (find_canonical_descriptor_in_load_object): Change type
588 of name parameter from char * to const char *.
589 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto.
590 * utils.c (fprintf_symbol_filtered): Ditto.
591 * defs.h (fprintf_symbol_filtered): Update.
592 * sparc-tdep.h (sparc_sol2_static_transform_name): Update.
593 * stabsread.h (end_psymtab): Update.
594 * stack.c (find_frame_funname): Change type of funname parameter
595 from char ** to const char **.
596 * stack.h (find_frame_funname): Update.
597 * typeprint.c (type_print): Change type of varstring parameter
598 from char * to const char *.
599 * value.h (type_print): Update.
600 * xcoffread.c (xcoff_start_psymtab): Change type of filename parameter
601 from char * to const char *. All callers updated.
602 (xcoff_end_psymtab): Change type of include_list parameter
603 from char ** to const char **. All callers updated.
604 (swap_sym): Similarly for name parameter. All callers updated.
605 * coffread.c (patch_type): Add (char*) cast to xfree parameter.
607 (process_coff_symbol): Use xstrdup.
608 * stabsread.c (stabs_method_name_from_physname): Renamed from
609 update_method_name_from_physname. Change result type from void
610 to char *. All callers updated.
611 (read_member_functions): In has_destructor case, store name in objfile
612 obstack instead of malloc space. In !has_stub case, fix mem leak.
614 2012-02-06 Luca Pizzamiglio <luca.pizzamiglio@gmail.com>
616 * configure: Rebuild.
617 * configure.ac: Put -L../bfd and -L../libiberty at the front of
620 2012-02-03 Kevin Buettner <kevinb@redhat.com>
622 * configure.tgt (rl78-*-elf): New target.
623 * rl78-tdep.c: New file.
625 2012-02-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
627 * remote.c (remote_rcmd): Use getpkt_sane to detect timeout
628 and continue the loop. Add QUIT statement.
630 2012-02-03 Tom Tromey <tromey@redhat.com>
633 * solib.h (gdb_bfd_lookup_symbol_from_symtab): Rename from
634 bfd_lookup_symbol_from_symtab.
635 * solib-pa64.c (pa64_solib_create_inferior_hook): Use
636 gdb_bfd_lookup_symbol_from_symtab.
638 2012-02-03 Joel Brobecker <brobecker@adacore.com>
640 * mi/mi-cmd-stack.c (list_args_or_locals): For argument symbols,
641 use SYMBOL_LINKAGE_NAME to find the corresponding non-argument
642 symbol. Add assertion that sym2 is never NULL.
644 2012-02-02 Doug Evans <dje@google.com>
646 * blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of
647 "name" parameter to const char ** from char **. All callers updated.
648 (find_pc_partial_function): Ditto.
649 (cache_pc_function_name): Change type to const char * from char *.
650 * symtab.h ((find_pc_partial_function_gnu_ifunc): Update.
651 (find_pc_partial_function): Update.
652 * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change
653 type of "name" parameter to const char * from char *.
655 * arch-utils.c (generic_in_solib_return_trampoline): Change
656 type of "name" parameter to const char * from char *.
657 * arch-utils.h (generic_in_solib_return_trampoline): Update.
658 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change
659 type of "name" parameter to const char * from char *.
660 * gdbarch.sh (in_solib_return_trampoline): Ditto.
661 * gdbarch.c: Regenerate.
662 * gdbarch.h: Regenerate.
663 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update.
664 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update.
665 * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change
666 type of "name" parameter to const char * from char *.
667 * skip.c (skip_function_pc): Ditto.
668 * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto.
669 * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update.
670 * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto.
671 * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto.
672 * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto.
673 * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto.
674 * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto.
675 * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name".
676 * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
678 2012-02-02 Pedro Alves <palves@redhat.com>
680 * remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if
681 the current inferior has no execution. Make sure the current
682 remote process matches gdb's current inferior.
684 2012-02-02 Tom Tromey <tromey@redhat.com>
687 * tui/tui-win.c (parse_scrolling_args): Don't write to possibly
690 2012-02-02 Tom Tromey <tromey@redhat.com>
693 * symtab.c (lookup_language_this): Set block_found.
695 2012-02-01 Tom Tromey <tromey@redhat.com>
698 * jit.c (struct jit_inferior_data): Rewrite.
699 (struct jit_objfile_data): New.
700 (get_jit_objfile_data): New function.
701 (add_objfile_entry): Update.
702 (jit_read_descriptor): Return int. Replace descriptor_addr
703 argument with inf_data. Update. Don't call error.
704 (jit_breakpoint_re_set_internal): Reorder logic. Update. Look up
706 (jit_inferior_init): Don't look up descriptor. Don't call error.
707 (jit_reset_inferior_data_and_breakpoints)
708 (jit_inferior_created_observer): Remove.
709 (jit_inferior_exit_hook): Update.
710 (jit_executable_changed_observer): Remove.
711 (jit_event_handler): Update.
712 (free_objfile_data): Reset inferior data if needed.
713 (_initialize_jit): Update.
715 2012-02-01 Tom Tromey <tromey@redhat.com>
717 * jit.c (bfd_open_from_target_memory): Move higher in file.
719 2012-02-01 Tristan Gingold <gingold@adacore.com>
721 * libunwind-frame.c (libunwind_load): Display message if dlopen
724 2012-02-01 Gary Benson <gbenson@redhat.com>
726 * symtab.h (symbol_name_match_p_ftype): New typedef.
727 (iterate_over_symbols): Use the above.
728 * symtab.c (iterate_over_symbols): Likewise.
729 * language.h (language_defn->la_iterate_over_symbols): Likewise.
730 * ada-lang.c (ada_iterate_over_symbols): Likewise.
731 * linespec.c (iterate_over_all_matching_symtabs): Likewise.
732 (iterate_name_matcher): Document return values.
733 (collect_one_symbol): Likewise.
734 (collect_function_symbols): Likewise.
735 (collect_symbols): Likewise.
737 2012-02-01 Tom Tromey <tromey@redhat.com>
739 * ada-lang.c (resolve_subexp): Update.
740 (ada_lookup_symbol_list): Add 'full_search' argument.
741 (ada_iterate_over_symbols): Pass 0 as full_search argument to
742 ada_lookup_symbol_list.
743 (ada_lookup_encoded_symbol): Update.
744 (get_var_value): Update.
745 * ada-exp.y (block_lookup): Update.
746 (write_var_or_type): Update.
747 (write_name_assoc): Update.
748 * ada-lang.h (ada_lookup_symbol_list): Update.
750 2012-01-31 Tom Tromey <tromey@redhat.com>
752 * language.h (struct language_defn) <la_iterate_over_symbols>: Fix
755 2012-01-31 Doug Evans <dje@google.com>
757 * symtab.h: Remove outdated comment.
758 (SYMBOL_MATCHES_NATURAL_NAME): Delete.
760 2012-02-01 Josh Matthews <josh@joshmatthews.net> (tiny change)
762 Fix build error in Darwin port.
763 * i386-darwin-nat.c: Include i386-nat.h.
765 2012-01-30 Tom Tromey <tromey@redhat.com>
767 PR breakpoints/13568:
768 * dwarf2read.c (dwarf_decode_macro_bytes): Add 'include_hash'
769 argument. Check for recursive includes.
770 (dwarf_decode_macros): Create an include hash.
772 2012-01-30 Michael Eager <eager@eagercon.com>
774 * configure.tgt (powerpc-*-linux*): Add glibc-tdep.o.
775 * ppc-linux-tdep.c: Include glibc-tdep.h.
776 (powerpc32_plt_stub, powerpc32_plt_stub_so): Add PLT stub templates.
777 (powerpc_linux_in_plt_stub): New function.
778 (powerpc_linux_in_dynsym_resolve_code): New function.
779 (ppc_skip_trampoline_code): New function.
780 (ppc_linux_init_abi): Use PPC specific functions rather than generic.
781 Use glibc_skip_solib_resolver.
783 2012-01-28 Jan Kratochvil <jan.kratochvil@redhat.com>
785 Code cleanup: Make 1440 bytes of data segment read-only.
786 * arch-utils.c (endian_enum): Make it const char *const [].
787 * arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings):
789 * breakpoint.c (always_inserted_enums): Likewise.
790 * cli/cli-cmds.c (script_ext_enums): Likewise.
791 * cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the
792 enumlist parameter const char *const *.
793 * cli/cli-decode.h (struct cmd_list_element): Make the enums field
795 * command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist
796 parameter const char *const *.
797 * cris-tdep.c (cris_modes): Make it const char *const [].
798 * filesystem.c (target_file_system_kinds): Likewise.
799 * i386-tdep.c (valid_flavors, valid_conventions): Likewise.
800 * infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names)
801 (can_use_displaced_stepping_enum, scheduler_enums)
802 (exec_direction_names): Likewise.
803 * language.c (_initialize_language): Make the type_or_range_names and
804 case_sensitive_names variables const char *const [].
805 * mips-tdep.c (mips_abi_strings): Make it const char *const [].
806 * python/python.c (python_excp_enums): Likewise.
807 * remote.c (interrupt_sequence_modes): Likewise.
808 * rs6000-tdep.c (powerpc_vector_strings): Likewise.
809 * serial.c (logbase_enums): Likewise.
810 * sh-tdep.c (sh_cc_enum): Likewise.
811 * stack.c (print_frame_arguments_choices, print_entry_values_choices):
813 * symtab.c (multiple_symbols_modes): Likewise.
814 * tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums):
816 * utils.c (internal_problem_modes): Likewise.
818 2012-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
820 Fix the 2012-01-26 regression by la_get_symbol_name_match_p.
821 * linespec.c (iterate_name_matcher): Negate the SYMBOL_NAME_MATCH_P
824 2012-01-27 Doug Evans <dje@google.com>
826 * configure.ac (with_python): Fix absolute path handling for win32.
827 * configure: Regenerate.
829 2012-01-26 Doug Evans <dje@google.com>
831 * symtab.c: Whitespace cleanup, no code changes.
833 * symtab.c (lookup_symbol_in_language): Improve comment.
834 (lookup_symbol_aux): Fix comment.
836 * psymtab.c (add_psymbol_to_list): Result is now "void".
837 * psympriv.h (add_psymbol_to_list): Update.
839 * dwarf2read.c (add_partial_symbol): Delete local psym, unused.
841 2012-01-26 Jan Kratochvil <jan.kratochvil@redhat.com>
843 Do not open script filenames twice.
844 * cli/cli-cmds.c (source_script_from_stream): Pass to
845 source_python_script also STREAM.
846 * python/py-auto-load.c (source_section_scripts): Pass to
847 source_python_script_for_objfile also STREAM.
848 (auto_load_objfile_script): Pass to source_python_script_for_objfile
850 * python/python-internal.h (source_python_script_for_objfile): New
851 parameter file, rename parameter file to filename.
852 * python/python.c (python_run_simple_file): Call PyRun_SimpleFile
853 instead if !_WIN32. Update the function comment.
854 (source_python_script, source_python_script_for_objfile)
855 (source_python_script): New parameter file, rename parameter file to
856 filename. Pass FILENAME to python_run_simple_file.
857 * python/python.h (source_python_script): New parameter file, rename
858 parameter file to filename.
860 2012-01-26 Pedro Alves <palves@redhat.com>
862 * corelow.c (core_has_fake_pid): Delete.
863 (core_close): Delete references to `core_has_fake_pid'.
864 (add_to_thread_list): Adjust to mark the inferior's pid as fake.
865 (core_open): Delete references to `core_has_fake_pid'.
866 (core_pid_to_str): Adjust to check inferior->fake_pid_p instead of
869 2012-01-26 Joel Brobecker <brobecker@adacore.com>
871 * symfile.h (struct quick_symbol_functions) [expand_symtabs_matching]:
872 Remove language parameter from name_matcher. Adjust the comment.
873 * symtab.c (search_symbols_name_matches, expand_partial_symbol_name):
874 Remove language parameter.
875 * ada-lang.c (ada_expand_partial_symbol_name): Likewise.
876 * linespec.c (iterate_name_matcher): Likewise.
877 * dwarf2read.c (dw2_expand_symtabs_matching): Adjust type of
878 name_matcher. Adjust call accordingly.
879 * psymtab.c (expand_symtabs_matching_via_partial): Likewise.
880 (maintenance_check_symtabs): Adjust type of parameter "fun".
881 * psymtab.h (maintenance_check_symtabs): Likewise.
883 2012-01-26 Joel Brobecker <brobecker@adacore.com>
885 * language.h (symbol_name_match_p_ftype): New typedef.
886 (struct language_defn): Replace field la_symbol_name_compare
887 by la_get_symbol_name_match_p.
888 * ada-lang.c (ada_get_symbol_name_match_p): New function.
889 (ada_language_defn): Use it.
890 * linespec.c (struct symbol_matcher_data): New type.
891 (iterate_name_matcher): Rewrite.
892 (iterate_over_all_matching_symtabs): Pass a pointer to
893 a symbol_matcher_data struct to expand_symtabs_matching
894 instead of just the lookup name.
895 * c-lang.c, d-lang.c, jv-lang.c, m2-lang.c, objc-lang.c,
896 opencl-lang.c, p-lang.c, language.c: Delete field
897 la_symbol_name_compare, and replace by NULL for new field
898 la_get_symbol_name_match_p.
899 * symfile.h (struct quick_symbol_functions): Update comment.
901 2012-01-25 Tom Tromey <tromey@redhat.com>
903 * breakpoint.c (bpstat_stop_status): Check 'breakpoint_at' before
906 2012-01-24 Tom Tromey <tromey@redhat.com>
909 * solib.c (update_solib_list): Update the program space's
910 added_solibs and deleted_solibs fields.
911 * progspace.h (struct program_space) <added_solibs,
912 deleted_solibs>: New fields.
913 (clear_program_space_solib_cache): Declare.
914 * progspace.c (release_program_space): Call
915 clear_program_space_solib_cache.
916 (clear_program_space_solib_cache): New function.
917 * infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>: Call
918 bpstat_stop_status. Use handle_solib_event.
919 * breakpoint.c: Include gdb_regex.h.
920 (print_solib_event): New function.
921 (bpstat_print): Use print_solib_event.
922 (bpstat_stop_status): Add special case for bp_shlib_event.
923 (handle_solib_event): New function.
924 (bpstat_what): Use handle_solib_event.
925 (struct solib_catchpoint): New.
926 (dtor_catch_solib, insert_catch_solib, remove_catch_solib)
927 (breakpoint_hit_catch_solib, check_status_catch_solib)
928 (print_it_catch_solib, print_one_catch_solib)
929 (print_mention_catch_solib, print_recreate_catch_solib): New
931 (catch_solib_breakpoint_ops): New global.
932 (catch_load_or_unload, catch_load_command_1)
933 (catch_unload_command_1): New functions.
934 (internal_bkpt_check_status): Add special case for
936 (internal_bkpt_print_it): Use print_solib_event.
937 (initialize_breakpoint_ops): Initialize
938 catch_solib_breakpoint_ops.
939 (_initialize_breakpoint): Register "catch load" and "catch
941 * breakpoint.h (handle_solib_event): Declare.
942 * NEWS: Add entry for "catch load" and "catch unload".
944 2012-01-24 Tom Tromey <tromey@redhat.com>
946 * ada-lang.c: Include gdb_vecs.h.
947 * charset.c: Include gdb_vecs.h.
948 * tracepoint.h: Include gdb_vecs.h.
949 * gdb_vecs.h: New file.
951 2012-01-24 Pedro Alves <pedro@codesourcery.com>
953 * breakpoint.c (breakpoint_hit_catch_fork)
954 (breakpoint_hit_catch_vfork, breakpoint_hit_catch_syscall)
955 (breakpoint_hit_catch_exec): Make use of the `ws' argument.
956 * infrun.c (inferior_has_forked, inferior_has_vforked)
957 (inferior_has_execd, inferior_has_called_syscall): Delete.
958 (handle_syscall_event): Get syscall_number from the execution
959 control state's wait status.
960 (wait_for_inferior): Don't clear syscall_number.
962 2012-01-24 Pedro Alves <palves@redhat.com>
964 * breakpoint.c (bpstat_check_location, bpstat_stop_status,
965 pc_at_non_inline_function): Add `ws' parameter, and pass it down.
966 (breakpoint_hit_catch_fork, breakpoint_hit_catch_vfork)
967 (breakpoint_hit_catch_syscall, breakpoint_hit_catch_exec): Add
969 (breakpoint_hit_ranged_breakpoint): Add `ws' parameter. Return
970 false for events other than TARGET_SIGNAL_TRAP.
971 (breakpoint_hit_watchpoint, base_breakpoint_breakpoint_hit):
973 (bkpt_breakpoint_hit): Add `ws' parameter. Return false for
974 events other than TARGET_SIGNAL_TRAP.
975 (tracepoint_breakpoint_hit): Add `ws' parameter.
976 * breakpoint.h (struct breakpoint_ops) <breakpoint_hit>: Add `ws'
978 (bpstat_stop_status): Same.
979 (pc_at_non_inline_function): Same.
980 * infrun.c (handle_syscall_event, handle_inferior_event): Adjust
981 to pass the current event's waitstatus to bpstat_stop_status
982 and pc_at_non_inline_function.
984 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
987 * cli/cli-cmds.c (source_script_from_stream): Never fclose STREAM.
988 Update the function comment for it.
989 (source_script_with_search): Call make_cleanup_fclose for STREAM.
990 * cli/cli-script.c (script_from_file): Do not call make_cleanup_fclose
993 2012-01-24 Pedro Alves <palves@redhat.com>
995 * breakpoint.c (bpstat_stop_status): Moving clearing print_it
996 outside `bs->stop' block.
997 (bpstat_what): Rework bp_shlib_event handling.
998 (internal_bkpt_check_status): If the breakpoint is a
999 bp_shlib_event, then set bs->stop and bs->print if
1000 stop_on_solib_events is set.
1002 2012-01-24 Gary Benson <gbenson@redhat.com>
1004 Delete #if 0'd out code.
1005 * stack.c (print_frame_label_vars): Remove.
1006 (catch_info): Likewise.
1007 (_initialize_stack): Remove "info catch" command.
1008 * NEWS: Mention the above.
1010 2012-01-24 Pedro Alves <palves@redhat.com>
1012 * remote.c (remote_add_inferior): New `fake_pid_p' parameter. Use
1014 (remote_notice_new_inferior): If the remote end doesn't support
1015 the multiprocess extensions, then the PID is fake.
1016 (add_current_inferior_and_thread): New.
1017 (remote_start_remote): Use it.
1018 (extended_remote_attach_1): Adjust.
1019 (extended_remote_create_inferior_1): Use
1020 add_current_inferior_and_thread.
1022 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1024 Fix watchpoints to be specific for each inferior.
1025 * breakpoint.c (watchpoint_in_thread_scope): Verify also
1026 current_program_space.
1027 * i386-nat.c (i386_inferior_data_cleanup): New.
1028 (i386_inferior_data_get): Replace variable inf_data_local by an
1030 (i386_use_watchpoints): Initialize i386_inferior_data.
1031 * linux-nat.c (linux_nat_iterate_watchpoint_lwps): Use INFERIOR_PTID
1032 specific iterate_over_lwps.
1034 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1036 Fix watchpoints across inferior fork.
1037 * amd64-linux-nat.c (update_debug_registers_callback): Update the
1038 comment for linux_nat_iterate_watchpoint_lwps.
1039 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
1040 linux_nat_iterate_watchpoint_lwps.
1041 (amd64_linux_prepare_to_resume): New comment on Linux kernel.
1042 * i386-linux-nat.c (update_debug_registers_callback): Update the
1043 comment for linux_nat_iterate_watchpoint_lwps.
1044 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
1045 linux_nat_iterate_watchpoint_lwps.
1046 (i386_linux_prepare_to_resume): New comment on Linux kernel.
1047 * i386-nat.c: Include inferior.h.
1048 (dr_mirror): Remove.
1049 (i386_inferior_data, struct i386_inferior_data)
1050 (i386_inferior_data_get): New.
1051 (i386_debug_reg_state): Use i386_inferior_data_get.
1052 (i386_cleanup_dregs, i386_update_inferior_debug_regs)
1053 (i386_insert_watchpoint, i386_remove_watchpoint)
1054 (i386_stopped_data_address, i386_insert_hw_breakpoint)
1055 (i386_remove_hw_breakpoint): New variable state, use
1056 i386_debug_reg_state instead of DR_MIRROR.
1057 * linux-nat.c (delete_lwp): New declaration.
1058 (num_lwps): Move here from downwards.
1059 (delete_lwp_cleanup): New.
1060 (linux_child_follow_fork): Create new child_lp, call
1061 linux_nat_new_thread and linux_nat_prepare_to_resume before calling
1063 (num_lwps): Move upwards.
1064 (linux_nat_iterate_watchpoint_lwps): New.
1065 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New.
1066 (linux_nat_iterate_watchpoint_lwps_ftype): New declaration.
1068 2012-01-24 Joel Brobecker <brobecker@adacore.com>
1072 2012-01-23 Pedro Alves <palves@redhat.com>
1074 * top.c (caution): Rename to ...
1075 (confirm): ... this.
1076 (show_caution): Rename to ...
1077 (show_confirm): ... this.
1078 (quit_cover): Adjust.
1079 (init_main): Adjust.
1080 * top.h (caution): Rename to ...
1081 (confirm): ... this.
1082 * utils.c (internal_vproblem, defaulted_query): Adjust.
1084 2012-01-23 Pedro Alves <palves@redhat.com>
1086 * top.c (caution): Update comment.
1087 (execute_command): Don't consider the current value of `caution'.
1089 2012-01-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1091 * cli/cli-cmds.c (find_and_open_script): Handle failure of fdopen.
1093 2012-01-23 Ulrich Weigand <ulrich.weigand@linaro.org>
1095 * inf-child.c: Include "gdb_stat.h" instead of <sys/stat.h>.
1096 * linux-tdep.c (linux_info_proc): Avoid ARI coding style warning.
1097 * target.c (target_fileio_pwrite): Remove buffer address from
1099 (target_fileio_pread): Likewise.
1101 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1103 * NEWS: Document remote "info proc" and "generate-core-file".
1105 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1107 * gdbarch.sh (find_memory_regions): New callback.
1108 * gdbarch.c, gdbarch.h: Regenerate.
1110 * gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions
1111 callback before falling back to target method.
1113 * linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove.
1114 (linux_target_install_ops): No longer install it.
1116 * linux-tdep.c (linux_find_memory_regions): New function.
1117 (linux_init_abi): Install it.
1119 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1121 * gdbarch.sh (make_corefile_notes): New architecture callback.
1122 * gdbarch.c: Regenerate.
1123 * gdbarch.h: Likewise.
1125 * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes
1126 before target_make_corefile_notes. If NULL is returned, the
1127 target does not support core file generation.
1129 * linux-nat.c: Include "linux-tdep.h".
1130 (find_signalled_thread, find_stop_signal): Remove.
1131 (linux_nat_do_thread_registers): Likewise.
1132 (struct linux_nat_corefile_thread_data): Likewise.
1133 (linux_nat_corefile_thread_callback): Likewise.
1134 (iterate_over_spus): Likewise.
1135 (struct linux_spu_corefile_data): Likewise.
1136 (linux_spu_corefile_callback): Likewise.
1137 (linux_spu_make_corefile_notes): Likewise.
1138 (linux_nat_collect_thread_registers): New function.
1139 (linux_nat_make_corefile_notes): Replace contents by call to
1140 linux_make_corefile_notes passing linux_nat_collect_thread_registers
1141 as native-only callback.
1143 * linux-tdep.h: Include "bfd.h".
1144 (struct regcache): Add forward declaration.
1145 (linux_collect_thread_registers_ftype): New typedef.
1146 (linux_make_corefile_notes): Add prototype.
1147 * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h",
1148 "regset.h", and "elf-bfd.h".
1149 (find_signalled_thread, find_stop_signal): New functions.
1150 (linux_spu_make_corefile_notes): Likewise.
1151 (linux_collect_thread_registers): Likewise.
1152 (struct linux_corefile_thread_data): New data structure.
1153 (linux_corefile_thread_callback): New funcion.
1154 (linux_make_corefile_notes): Likewise.
1155 (linux_make_corefile_notes_1): Likewise.
1156 (linux_init_abi): Install it.
1158 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1160 * gdbarch.sh (info_proc): New callback.
1161 * gdbarch.c, gdbarch.h: Regenerate.
1163 * infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback
1164 before falling back to the target info_proc callback.
1166 * linux-nat.c: Do not include "cli/cli-utils.h".
1167 (linux_nat_info_proc): Remove.
1168 (linux_target_install_ops): No longer install it.
1170 * linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>.
1171 (read_mapping): New function.
1172 (linux_info_proc): Likewise.
1173 (linux_init_abi): Install it.
1175 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1177 * defs.h (enum info_proc_what): Moved here from linux-nat.c
1178 * infcmd.c: (info_proc_cmd_1): New function.
1179 (info_proc_cmd): New function, moved here from equivalent routine
1180 orignally in linux-nat.c.
1181 (info_proc_cmd_mappings): Likewise.
1182 (info_proc_cmd_stat): Likewise.
1183 (info_proc_cmd_status): Likewise.
1184 (info_proc_cmd_cwd): Likewise.
1185 (info_proc_cmd_cmdline): Likewise.
1186 (info_proc_cmd_exe): Likewise.
1187 (info_proc_cmd_all): Likewise.
1188 (_initialize_infcmd): Install "info proc" command and subcommands.
1190 * target.h (struct target_ops): Add to_info_proc.
1191 (target_info_proc): Add prototype.
1192 * target.c (target_info_proc): New function.
1194 * procfs.c (procfs_info_proc): Add prototype.
1195 (info_proc_cmd): Rename into ...
1196 (procfs_info_proc): ... this. Update argument types as appropriate
1197 for a to_info_proc implementation. Handle "what" argument.
1198 (procfs_target): Install procfs_info_proc.
1199 (_initialize_procfs): No longer install "info proc" command.
1201 * linux-nat.c: (enum info_proc_what): Remove.
1202 (linux_nat_info_proc_cmd_1): Rename into ...
1203 (linux_nat_info_proc): ... this. Update argument types as appropriate
1204 for a to_info_proc implementation.
1205 (linux_nat_info_proc_cmd): Remove.
1206 (linux_nat_info_proc_cmd_mappings): Likewise.
1207 (linux_nat_info_proc_cmd_stat): Likewise.
1208 (linux_nat_info_proc_cmd_status): Likewise.
1209 (linux_nat_info_proc_cmd_cwd): Likewise.
1210 (linux_nat_info_proc_cmd_cmdline): Likewise.
1211 (linux_nat_info_proc_cmd_exe): Likewise.
1212 (linux_nat_info_proc_cmd_all): Likewise.
1213 (linux_target_install_ops): Install linux_nat_info_proc.
1214 (_initialize_linux_nat): No longer install "info proc" command
1217 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1219 * configure.ac [AC_CHECK_FUNCS]: Check for readlink.
1220 * config.in, configure: Regenerate.
1222 * target.h (struct target_ops): Add to_fileio_readlink.
1223 (target_fileio_readlink): Add prototype.
1224 * target.c (target_fileio_readlink): New function.
1226 * inf-child.c: Conditionally include <sys/param.h>.
1227 (inf_child_fileio_readlink): New function.
1228 (inf_child_target): Install it.
1230 * remote.c (PACKET_vFile_readlink): New enum value.
1231 (remote_hostio_readlink): New function.
1232 (init_remote_ops): Install it.
1233 (_initialize_remote): Handle vFile:readlink packet type.
1235 2012-01-20 Pedro Alves <palves@redhat.com>
1236 Ulrich Weigand <ulrich.weigand@linaro.org>
1238 * configure.ac [AC_CHECK_FUNCS]: Check for pread and pwrite.
1239 * config.in, configure: Regenerate.
1241 * target.h (struct target_ops): Add to_fileio_open, to_fileio_pwrite,
1242 to_fileio_pread, to_fileio_close, to_fileio_unlink.
1243 (target_fileio_open): Add prototype.
1244 (target_fileio_pwrite): Likewise.
1245 (target_fileio_pread): Likewise.
1246 (target_fileio_close): Likewise.
1247 (target_fileio_unlink): Likewise.
1248 (target_fileio_read_alloc): Likewise.
1249 (target_fileio_read_stralloc): Likewise.
1251 * target.c: Include "gdb/fileio.h".
1252 (target_read_stralloc): Accept trailing, but not embedded NUL bytes.
1253 (default_fileio_target): New function.
1254 (target_fileio_open): Likewise.
1255 (target_fileio_pwrite): Likewise.
1256 (target_fileio_pread): Likewise.
1257 (target_fileio_close): Likewise.
1258 (target_fileio_unlink): Likewise.
1259 (target_fileio_close_cleanup): Likewise.
1260 (target_fileio_read_alloc_1): Likewise.
1261 (target_fileio_read_alloc): Likewise.
1262 (target_fileio_read_stralloc): Likewise.
1264 * inf-child.c: Include "gdb/fileio.h", <sys/types.h>, <sys/stat.h>,
1265 <fcntl.h>, and <unistd.h>.
1266 (inf_child_fileio_open_flags_to_host): New function.
1267 (inf_child_errno_to_fileio_error): Likewise.
1268 (inf_child_fileio_open): Likewise.
1269 (inf_child_fileio_pwrite): Likewise.
1270 (inf_child_fileio_pread): Likewise.
1271 (inf_child_fileio_close): Likewise.
1272 (inf_child_fileio_unlink): Likewise.
1273 (inf_child_target): Install to_fileio routines.
1275 * remote.c (init_remote_ops): Install to_fileio routines.
1277 2012-01-20 Pedro Alves <palves@redhat.com>
1278 Ulrich Weigand <ulrich.weigand@linaro.org>
1280 * remote.c (remote_multi_process_p): Only check for multi-process
1281 protocol feature, do not check for extended protocol.
1282 (remote_supports_multi_process): Check for extended protocol here.
1283 (set_general_process): Likewise.
1284 (extended_remote_kill): Likewise.
1285 (remote_pid_to_str): Likewise.
1286 (remote_query_supported): Always query multiprocess mode.
1288 2012-01-20 Pedro Alves <palves@redhat.com>
1289 Ulrich Weigand <ulrich.weigand@linaro.org>
1291 * inferior.h (struct inferior): Add fake_pid_p.
1292 * inferior.c (exit_inferior_1): Clear fake_pid_p.
1293 * remote.c (remote_start_remote): Set fake_pid_p if we have to use
1294 magic_null_ptid since the remote side doesn't provide a real PID.
1296 2012-01-19 Tom Tromey <tromey@redhat.com>
1298 * NEWS: Combine the two Python sections.
1300 2012-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1302 * target.h (target_close): Update comment on the target's unpush state.
1304 2012-01-19 Pedro Alves <palves@redhat.com>
1306 * linux-nat.c (linux_nat_close): Call linux_nat_is_async_p and
1307 linux_nat_async directly instead of going through the target
1309 * target.c (unpush_target): Close target after unpushing it, not
1312 2012-01-19 Gary Benson <gbenson@redhat.com>
1314 * mdebugread.c (sort_blocks): Replace integer constants with ones
1315 derived from FIRST_LOCAL_BLOCK.
1317 2012-01-18 Paul Pluzhnikov <ppluzhnikov@google.com>
1318 Jan Kratochvil <jan.kratochvil@redhat.com>
1321 * symfile.c (find_separate_debug_file): New function.
1322 (terminate_after_last_dir_separator): Likewise.
1323 (find_separate_debug_file_by_debuglink): Also try realpath.
1324 * configure.ac (AC_CHECK_FUNCS): Add lstat.
1325 * configure: Regenerate.
1326 * config.in: Regenerate.
1328 2012-01-18 Doug Evans <dje@google.com>
1330 * Makefile.in (TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_DEFINE): Delete.
1331 (main.o): Remove rule.
1332 * configure.ac (BINDIR): Define with AC_DEFINE_DIR.
1333 (--with-sysroot): Rewrite.
1334 * configure: Regenerate.
1335 * config.in: Regenerate.
1337 2012-01-18 Sergio Durigan Junior <sergiodj@redhat.com>
1339 * parse.c (initialize_expout): New function.
1340 (reallocate_expout): Likewise.
1341 (parse_exp_in_context): Use `initialize_expout' and
1342 `reallocate_expout' when appropriate.
1344 2012-01-18 Pedro Alves <palves@redhat.com>
1346 * record.c (struct record_breakpoint, record_breakpoint_p)
1347 (record_breakpoints): New.
1348 (record_insert_breakpoint, record_remove_breakpoint): Manage
1349 record breakpoints list. Only remove breakpoints from the
1350 inferior if they had been inserted there in the first place.
1352 2012-01-17 Doug Evans <dje@google.com>
1354 * linespec.c (decode_line_internal): Don't call symtabs_from_filename
1355 if we know we don't have a file name to look for.
1357 2012-01-17 Pedro Alves <palves@redhat.com>
1359 * dwarf2-frame.c (dwarf2_frame_cfa): Throw NOT_AVAILABLE_ERROR, if
1360 the frame's stop reason is UNWIND_UNAVAILABLE.
1362 2012-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1364 Fix compilation error.
1365 * m2-exp.y (yyerror): Use ANSI C prototype.
1367 2012-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
1369 * f-exp.y (parse_number): Convert prototype from K&R to ANSI C.
1370 (growbuf_by_size): Likewise.
1371 (yyerror): Likewise.
1372 * m2-exp.y (make_qualname): Remove function (was #if 0'ed).
1373 (modblock): Remove variable (was #if 0'ed).
1374 (parse_number): Convert prototype from K&R to ANSI C.
1375 (yyerror): Likewise.
1376 * objc-exp.y (parse_number): Likewise.
1377 (yyerror): Likewise.
1378 (yylex): Remove #if 0'ed code.
1379 * p-exp.y (uptok): Convert prototype from K&R to ANSI C.
1380 (yyerror): Likewise.
1382 2012-01-16 Tom Tromey <tromey@redhat.com>
1385 * symtab.h (compare_filenames_for_search): Declare.
1386 * symtab.c (compare_filenames_for_search): New function.
1387 (iterate_over_some_symtabs): Use it.
1388 * symfile.h (struct quick_symbol_functions)
1389 <map_symtabs_matching_filename>: Change spec.
1390 * psymtab.c (partial_map_symtabs_matching_filename): Use
1391 compare_filenames_for_search. Update for new spec.
1392 * dwarf2read.c (dw2_map_symtabs_matching_filename): Use
1393 compare_filenames_for_search. Update for new spec.
1394 * breakpoint.c (clear_command): Use compare_filenames_for_search.
1396 2012-01-16 Tom Tromey <tromey@redhat.com>
1399 * gdbtypes.h (TYPE_FLAG_ENUM): New macro.
1400 (struct main_type) <flag_flag_enum>: New field.
1401 * dwarf2read.c (process_enumeration_scope): Detect "flag" enums.
1402 * NEWS: Add entries.
1403 * c-valprint.c (c_val_print) <TYPE_CODE_ENUM>: Handle "flag"
1405 * python/lib/gdb/printing.py (_EnumInstance): New class.
1406 (FlagEnumerationPrinter): Likewise.
1408 2012-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
1410 * breakpoint.c (create_sals_from_address_default): New function.
1411 (create_breakpoints_sal_default): Likewise.
1412 (decode_linespec_default): Likewise.
1413 (is_marker_spec): Removed.
1414 (strace_marker_p): New function.
1415 (init_breakpoint_sal): Using `strace_marker_p' instead of
1417 (create_breakpoint): Call method `create_sals_from_address' from
1418 breakpoint_ops, replacing code that created SALs conditionally
1419 on the type of the breakpoint. Call method `create_breakpoints_sal',
1420 replacing code that created breakpoints conditionally on the type
1422 (base_breakpoint_create_sals_from_address): New function.
1423 (base_breakpoint_create_breakpoints_sal): Likewise.
1424 (base_breakpoint_decode_linespec): Likewise.
1425 (base_breakpoint_ops): Add methods
1426 `base_breakpoint_create_sals_from_address',
1427 `base_breakpoint_create_breakpoints_sal' and
1428 `base_breakpoint_decode_linespec'.
1429 (bkpt_create_sals_from_address): New function.
1430 (bkpt_create_breakpoints_sal): Likewise.
1431 (bkpt_decode_linespec): Likewise.
1432 (tracepoint_create_sals_from_address): Likewise.
1433 (tracepoint_create_breakpoints_sal): Likewise.
1434 (tracepoint_decode_linespec): Likewise.
1435 (strace_marker_create_sals_from_address): Likewise.
1436 (strace_marker_create_breakpoints_sal): Likewise.
1437 (strace_marker_decode_linespec): Likewise.
1438 (strace_marker_breakpoint_ops): New variable.
1439 (addr_string_to_sals): Remove `marker_spec'. Call method
1440 `decode_linespec' from breakpoint_ops, replacing code that decoded
1441 an address string into a SAL. Use `strace_marker_p' instead of
1443 (strace_command): Decide whether we are dealing with a static
1444 tracepoint with marker or not. Use the appropriate breakpoint_ops.
1445 (initialize_breakpoint_ops): Initialize new fields of breakpoint_ops.
1446 * breakpoint.h (linespec_result, linespec_sals): New forward
1448 (breakpoint_ops) <create_sals_from_address>,
1449 <create_breakpoints_sal>, <decode_linespec>: New methods.
1451 2012-01-14 Doug Evans <dje@google.com>
1453 * NEWS: Update text for "maint set python print-stack".
1454 It is deprecated in gdb 7.4 and deleted in 7.5.
1456 2012-01-13 Eli Zaretskii <eliz@gnu.org>
1458 * gdb_curses.h (MOUSE_MOVED) [__MINGW32__]: Undefine before
1461 2012-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1463 * configure: Regenerate.
1464 * config.in: Regenerate.
1466 2012-01-12 Keith Seitz <keiths@redhat.com>
1469 * varobj.c (ANONYMOUS_STRUCT_NAME): Define.
1470 (ANONYMOUS_UNION_NAME): Define.
1471 (is_path_expr_parent): New function.
1472 (get_path_expr_parent): New function.
1473 (is_anonymous_child): New function.
1474 (create_child_with_value): If the child is anonymous and without
1475 a name, assign an object name to it.
1476 (c_describe_child): Use get_path_expr_parent to determine
1477 the parent expression.
1478 If there field represents an anonymous struct or union and
1479 has no name, set an appropriate display name and expression.
1480 (cplus_describe_child): Likewise.
1482 2012-01-12 Pedro Alves <palves@redhat.com>
1484 * i386-tdep.c (i386_frame_cache_1): Also mark the frame base as
1485 available when %ebp is found to be zero (outermost).
1487 2012-01-11 Andreas Tobler <andreast@fgznet.ch>
1489 * common/gdb_assert.h (gdb_static_assert): Rename static_assert to
1490 an internal gdb_static_assert.
1491 * mi/mi-common.c: Rename static_assert to gdb_static_assert.
1493 2012-01-11 Tom Tromey <tromey@redhat.com>
1496 * breakpoint.c (_initialize_breakpoint): Fix help for "catch
1497 catch" and "catch throw".
1499 2012-01-11 Paul Hilfinger <hilfingr@adacore.com>
1501 * blockframe.c (block_innermost_frame): Start search from selected
1502 frame, if present, or otherwise the current frame.
1504 * c-exp.y (variable): Update innermost_block for
1505 'block COLONCOLON NAME' clause.
1506 * m2-exp.y (variable): Ditto.
1507 * objc-exp.y (variable): Ditto.
1509 2012-01-10 Tom Tromey <tromey@redhat.com>
1512 * python/python.c (finish_python_initialization): Set sys.argv.
1514 2012-01-10 Doug Evans <dje@google.com>
1516 * dwarf2read.c (dwarf_decode_lines): Remove arg "abfd". New arg
1517 "want_line_info". All callers updated.
1518 (dwarf_decode_lines_1): New function.
1519 (handle_DW_AT_stmt_list): Add function comment.
1520 New arg "want_line_info". All callers updated.
1521 (read_file_scope,read_type_unit_scope): Move comment from
1522 handle_DW_AT_stmt_list to here.
1524 2012-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1526 Fix regression after libiberty/ update for GCC PR 6057 and others.
1527 * c-exp.y (operator) <OPERATOR DELETE>
1528 (operator) <OPERATOR DELETE '[' ']'>: Add trailing space.
1529 * cp-name-parser.y (fill_comp, make_operator, make_dtor)
1530 (make_builtin_type, make_name): New variable i, add gdb_assert.
1531 (operator) <OPERATOR NEW>: Update ARGS to 3.
1532 (operator) <OPERATOR DELETE>: Add trailing space.
1533 (operator) <OPERATOR NEW '[' ']'>: Update ARGS to 3.
1534 (operator) <OPERATOR DELETE '[' ']'>: Add trailing space.
1535 * cp-support.c (cp_canonicalize_string): Check NULL from
1536 cp_comp_to_string, call warning and return.
1538 2012-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1540 Fix duplicate .o files after omitting libbfd.a.
1541 * Makefile.in (ALL_TARGET_OBS): Remove corelow.o.
1542 (SFILES): Add corelow.c.
1543 (COMMON_OBS): Add corelow.o.
1544 (ALLDEPFILES): Remove corelow.c.
1545 * config/alpha/alpha-linux.mh (NATDEPFILES): Remove corelow.o.
1546 * config/alpha/alpha-osf3.mh: Likewise.
1547 * config/alpha/fbsd.mh: Likewise.
1548 * config/arm/nbsdaout.mh: Likewise.
1549 * config/arm/nbsdelf.mh: Likewise.
1550 * config/i386/i386gnu.mh: Likewise.
1551 * config/ia64/hpux.mh: Likewise.
1552 * config/ia64/linux.mh: Likewise.
1553 * config/m32r/linux.mh: Likewise.
1554 * config/m68k/linux.mh: Likewise.
1555 * config/mips/irix5.mh: Likewise.
1556 * config/mips/irix6.mh: Likewise.
1557 * config/pa/hpux.mh: Likewise.
1558 * config/pa/linux.mh: Likewise.
1559 * config/powerpc/aix.mh: Likewise.
1560 * config/sparc/linux.mh: Likewise.
1561 * config/sparc/linux64.mh: Likewise.
1562 * config/sparc/sol2.mh: Likewise.
1563 * config/vax/vax.mh: Likewise.
1564 * configure.tgt (alpha*-*-freebsd* alpha*-*-kfreebsd*-gnu)
1565 (alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu, alpha*-*-openbsd*)
1566 (am33_2.0*-*-linux*, arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-linux*)
1567 (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-netbsd*)
1568 (hppa*-*-openbsd*, i[34567]86-*-dicos*, i[34567]86-*-freebsd*)
1569 (i[34567]86-*-kfreebsd*-gnu, i[34567]86-*-netbsd*)
1570 (i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*, i[34567]86-*-nto*)
1571 (i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*)
1572 (i[34567]86-*-solaris*, i[34567]86-*-linux*, i[34567]86-*-cygwin*)
1573 (i[34567]86-*-mingw32*, m68*-*-netbsd*, m68*-*-knetbsd*-gnu)
1574 (m68*-*-openbsd*, m88*-*-openbsd*, microblaze*-linux-*)
1575 (microblaze*-*-linux*, mips*-*-linux*, mips*-*-netbsd*)
1576 (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
1577 (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-linux*)
1578 (powerpc64-*-linux*, s390*-*-*, score-*-*, sh*-*-linux*)
1579 (sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
1580 (sparc*-*-freebsd*, sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*)
1581 (sparc-*-knetbsd*-gnu, sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu)
1582 (sparc-*-openbsd*, sparc64-*-openbsd*, tic6x-*-*linux, vax-*-netbsd*)
1583 (vax-*-knetbsd*-gnu, vax-*-openbsd*, x86_64-*-dicos*, x86_64-*-linux*)
1584 (x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu, x86_64-*-netbsd*)
1585 (x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*, xtensa*-*-linux*): Remove
1586 corelow.o from gdb_target_obs.
1587 * corefile.c (core_target): Update the comment on NULL value.
1588 (core_file_command): Replace error by gdb_assert on CORE_TARGET.
1589 * corelow.c (sniff_core_bfd): Call error instead of warning on zero
1590 MATCHES. Drop YUMMY set on NULL.
1591 (core_close): Do not call exit_inferior_silent on zero PID. Do not
1592 reclaim CORE_DATA if it is already NULL.
1594 2012-01-09 Doug Evans <dje@google.com>
1596 * gdbtypes.c (safe_parse_type): Initialize type to keep gcc happy.
1597 * varobj.c (varobj_set_value): Initialize val,value to keep gcc happy.
1599 2012-01-09 Keith Seitz <keiths@redhat.com>
1601 * breakpoint.c (wrapper.h): Don't include.
1603 2012-01-09 Keith Seitz <keiths@redhat.com>
1605 * Makefile.in (SFILES): Remove wrapper.c.
1606 (HFILES_NO_SRCDIR): Remove wrapper.h.
1607 (COMMON_OBS): Remove wrapper.o.
1608 * cli/cli-interp.c: Don't inlude wrapper.h.
1609 * corelow.c: Likewise.
1610 (core_open): Replace gdb_target_find_new_threads with
1611 TRY_CATCH around target_find_new_threads.
1612 * eval.c (fetch_subexp_value): Likewise for value_fetch_lazy.
1613 * gdbtypes.c (safe_parse_type): Likewise for parse_and_eval_type.
1614 * varobj.c (varobj_create): Likewise for parse_exp_1 and
1615 evaluate_expression.
1616 (varobj_set_value): Likewise for evaluate_expression and
1618 (install_new_variable): Likewise for value_fetch_lazy.
1619 (adjust_value_for_child_access): Likewise for value_ind.
1620 (c_describe_child): Likewise for value_subscript and
1622 (c_value_of_root): Likewise for evaluate_expression.
1623 * wrapper.c: Remove.
1624 * wrapper.h: Remove.
1626 2012-01-09 Doug Evans <dje@google.com>
1628 * dwarf2read.c (read_and_check_comp_unit_head): Renamed from
1629 partial_read_comp_unit_head. Replace "buffer", "buffer_size" and
1630 "abfd" args with "section". All callers updated.
1631 Error checking code moved ...
1632 (error_check_comp_unit_head): ... here. New function.
1633 (read_and_check_type_unit_head): Renamed from read_type_unit_head.
1634 Delete arg "abfd". New arg "type_offset". All callers updated.
1635 (create_debug_types_hash_table): Simplify by using
1636 read_and_check_type_unit_head.
1638 * parser-defs.h (namecopy): Delete.
1639 * parse.c (namecopy, namecopy_size): Move into copy_name.
1641 2012-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1643 Partially fix duplicate .o files after omitting libbfd.a.
1644 * config/alpha/alpha-osf3.mh (NATDEPFILES): Remove solib.o.
1645 * config/i386/nbsdaout.mh (NATDEPFILES): Remove solib.o.
1646 * config/i386/obsdaout.mh (NATDEPFILES): Remove solib.o.
1647 * config/m68k/nbsdaout.mh (NATDEPFILES): Remove solib.o.
1648 * config/m68k/obsd.mh (NATDEPFILES): Remove solib.o.
1649 * config/powerpc/aix.mh (NATDEPFILES): Remove xcoffread.o.
1650 * config/vax/nbsdaout.mh (NATDEPFILES): Remove solib.o.
1652 2012-01-09 Pedro Alves <palves@redhat.com>
1654 * MAINTAINERS: Update my email address.
1656 2012-01-08 Doug Evans <dje@google.com>
1658 * dwarf2read.c (dwarf2_per_objfile): Rename n_type_comp_units to
1659 n_type_units. Rename type_comp_units to all_type_units.
1661 (add_signatured_type_cu_to_table): Renamed from
1662 add_signatured_type_cu_to_list. All callers updated.
1664 * gdbtypes.h (struct cplus_struct_type): Delete member
1665 nfn_fields_total. All uses removed.
1667 2012-01-06 Doug Evans <dje@google.com>
1669 * dwarf2read.c: Move FIXME from dwarf2_build_psymtabs_hard
1671 (dwarf2_find_comp_unit): Delete.
1672 (process_psymtab_comp_unit): Make result "void".
1673 Delete args buffer, info_ptr, buffer_size, and replace with
1674 "section". All callers updated.
1675 (dwarf2_build_psymtabs_hard): Simplify.
1677 2012-01-06 Sergio Durigan Junior <sergiodj@redhat.com>
1678 Thiago Jung Bauermann <bauerman@br.ibm.com>
1680 * ada-lang.c (ada_exception_name_addr): Add `volatile' keyword
1681 before `struct gdb_exception'.
1682 * breakpoint.c (update_global_location_list_nothrow)
1683 (update_breakpoint_locations, enable_breakpoint_disp): Likewise.
1684 * cp-abi.c (value_rtti_type): Likewise.
1685 * cp-support.c (cp_validate_operator): Likewise.
1686 * infrun.c (insert_exception_resume_breakpoint)
1687 (check_exception_resume, keep_going): Likewise.
1688 * mi-interp.c (mi_breakpoint_created)
1689 (mi_breakpoint_modified): Likewise.
1690 * rs6000-aix-tdep.c (rs6000_convert_from_func_ptr_addr): Likewise.
1691 * solib-ia64-hpux.c (ia64_hpux_at_dld_breakpoint_p)
1692 (ia64_hpux_handle_dld_breakpoint_1): Likewise.
1694 2012-01-05 Doug Evans <dje@google.com>
1696 * dwarf2read.c (statement_prologue): Delete, unused.
1698 * dwarf2read.c (dwarf2_per_cu_addr_size): Make result type an int.
1699 * dwarf2loc.h (dwarf2_per_cu_addr_size): Update.
1701 * dwarf2read.c (comp_unit_header): Delete, unused.
1703 2012-01-05 Ulrich Weigand <uweigand@de.ibm.com>
1705 * configure.tgt [s390*-*-*] (gdb_target_obs): Add corelow.o.
1706 * config/s390/s390.mh (NATDEPFILES): Remove corelow.o.
1708 2012-01-05 Khoo Yit Phang <khooyp@cs.umd.edu>
1710 * infrun.c (normal_stop): Don't skip calling the normal_stop
1711 observers if the thread was doing a multi-step, but stopped for
1712 some reason other than stepping.
1714 2012-01-05 Pedro Alves <alves.ped@gmail.com>
1716 * cli/cli-decode.h: Add comments.
1717 (CMD_LIST_AMBIGUOUS): Moved to command.h
1718 (add_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd)
1719 (set_cmd_cfunc, set_cmd_sfunc, set_cmd_completer, cmd_cfunc_eq)
1720 (set_cmd_context, get_cmd_context, lookup_cmd, lookup_cmd_1)
1721 (deprecate_cmd, deprecated_cmd_warning, lookup_cmd_composition)
1722 (add_com, add_com_alias, add_info, add_info_alias)
1723 (complete_on_cmdlist, complete_on_enum, help_list): Remove
1725 * command.h: Add and adjust comments.
1726 (CMD_LIST_AMBIGUOUS): Moved here.
1727 (help_cmd, help_cmd_list): Delete declarations.
1729 2012-01-04 Doug Evans <dje@google.com>
1731 * dwarf2read.c (dwarf2_read_abbrevs): Delete arg "abfd".
1732 All callers updated.
1733 (load_full_type_unit): Renamed from read_signatured_type_at_offset.
1734 Replace all arguments with "per_cu". All callers updated.
1736 * dwarf2read.c (dwarf2_per_cu_data): Remove outdated comment.
1738 * dwarf2read.c (init_one_comp_unit): Delete arg "objfile".
1739 New arg "per_cu". All callers updated.
1741 Delete #if 0'd out code.
1742 * language.c (binop_result_type): Delete.
1743 (simple_type, ordered_type, same_type, integral_type): Delete.
1744 (numeric_type, character_type, string_type, boolean_type): Delete.
1745 (float_type, structured_type): Delete.
1746 * language.h: Update.
1748 2012-01-04 Tom Tromey <tromey@redhat.com>
1750 * python/py-value.c (valpy_binop): Initialize 'res_val'.
1752 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1754 * corefile.c (close_exec_file): Delete.
1755 (reopen_exec_file): Remove commented out code that seems related
1756 to close_exec_file, which is being deleted here.
1757 * inferior.h (close_exec_file): Delete.
1758 * fork-child.c (fork_inferior): Remove call to fork_inferior.
1760 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1762 * ada-lang.c: #include "cli/cli-utils.h".
1763 (get_selections): Use skip_spaces.
1764 (ada_get_next_arg): Use skip_spaces and skip_to_space.
1765 (catch_ada_exception_command_split): Use skip_spaces.
1766 (ada_decode_assert_location): Likewise.
1768 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1770 * linespec.c (decode_line_internal): Check for C++ or Java
1771 compound constructs only if the current language is C, C++
1774 2012-01-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1777 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1778 Joel Brobecker <brobecker@adacore.com>
1779 Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
1780 * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
1782 * infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
1783 fall through into AT_ENTRY_POINT.
1784 (call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
1786 * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
1787 PPC_INSN_SIZE skip to 3 times.
1789 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1791 * linespec.c (add_minsym): Preserve function descriptors.
1793 2012-01-04 Ulrich Weigand <uweigand@de.ibm.com>
1795 * breakpoint.c (all_locations_are_pending): Consider locations
1796 in program spaces executing during startup pending as well.
1798 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1800 Copyright year update in most files of the GDB Project.
1802 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1804 * copyright.sh: Delete.
1805 * copyright.py: Rewrite.
1807 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1809 * gnulib/extra/update-copyright: New file, imported from gnulib.
1811 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1813 * README (Copyright and License Notices): New section.
1815 2012-01-03 Tom Tromey <tromey@redhat.com>
1818 * python/py-value.c (valpy_dereference, valpy_get_address
1819 valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast)
1820 (valpy_getitem, valpy_call, valpy_binop, valpy_negative)
1821 (valpy_absolute, valpy_richcompare): Free intermediate values.
1823 2011-01-03 Joel Brobecker <brobecker@adacore.com>
1825 * ada-lang.c: Reformat the copyright notice.
1827 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1829 * Makefile.in (ALL_TARGET_OBS): Remove solib-target.o.
1830 * configure.tgt (arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-symbianelf*)
1831 (i[34567]86-*-dicos*, i[34567]86-*-cygwin*, i[34567]86-*-mingw32*)
1832 (x86_64-*-dicos*, x86_64-*-mingw*): Remove solib-target.o.
1833 Revert this part of:
1834 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1835 Build gdb directly from *.o files not using libgdb.a.
1836 * Makefile.in (COMMON_OBS): Remove solib-target.o.
1838 2012-01-02 Joel Brobecker <brobecker@adacore.com>
1840 * gdb/common/gdb_thread_db.h, gdb/dbxread.c, gdb/environ.c,
1841 gdb/gcore.h, gdb/rs6000-tdep.h, gdb/s390-nat.c, gdb/tic6x-tdep.c:
1842 Reformat the copyright header.
1844 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1846 Revert this part of:
1847 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1848 Remove the gdbtui binary.
1849 * gdb.c (main): Remove args.interpreter_p initialization.
1850 * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
1851 * main.h (struct captured_main_args): Remove interpreter_p.
1853 2012-01-02 Joel Brobecker <brobecker@adacore.com>
1855 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2011.
1857 2012-01-02 Joel Brobecker <brobecker@adacore.com>
1859 * top.c (print_gdb_version): Update copyright year.
1861 2012-01-02 Yao Qi <yao@codesourcery.com>
1863 * inf-ptrace.c (inf_ptrace_xfer_partial): Reindent.
1865 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1866 Joel Brobecker <brobecker@adacore.com>
1868 Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
1869 * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
1871 * infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
1872 fall through into AT_ENTRY_POINT.
1873 (call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
1875 * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
1876 PPC_INSN_SIZE skip to 3 times.
1878 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1880 * amd64-linux-nat.c (update_debug_registers_callback): New comment on
1882 * i386-linux-nat.c (update_debug_registers_callback): Likewise.
1884 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1886 Build gdb directly from *.o files not using libgdb.a.
1887 * Makefile.in (SUBDIR_TUI_OBS): Remove duplicate tui.o.
1888 (COMMON_OBS): Remove solib-target.o.
1889 (LIBGDB_OBS, libgdb.a): Move it before the gdb$(EXEEXT) rule.
1890 (gdb$(EXEEXT)): Replace libgdb.a with $(LIBGDB_OBS).
1891 (LIBGDB_OBS, libgdb.a): Move it above.
1892 * configure.tgt (alpha*-*-linux*, alpha*-*-freebsd*)
1893 (alpha*-*-kfreebsd*-gnu, alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu)
1894 (alpha*-*-openbsd*, am33_2.0*-*-linux*, arm*-wince-pe)
1895 (arm*-*-mingw32ce*, arm*-*-linux*, arm*-*-netbsd*, arm*-*-knetbsd*-gnu)
1896 (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-linux*)
1897 (hppa*-*-netbsd*, hppa*-*-openbsd*, i[34567]86-*-darwin*)
1898 (i[34567]86-*-dicos*, i[34567]86-*-freebsd*, i[34567]86-*-kfreebsd*-gnu)
1899 (i[34567]86-*-netbsd*, i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*)
1900 (i[34567]86-*-nto*, i[34567]86-*-solaris2.1[0-9]*)
1901 (x86_64-*-solaris2.1[0-9]*, i[34567]86-*-solaris*, i[34567]86-*-linux*)
1902 (i[34567]86-*-gnu*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*)
1903 (m68*-*-netbsd*, m68*-*-knetbsd*-gnu, m68*-*-openbsd*)
1904 (microblaze*-linux-*, microblaze*-*-linux*, mips*-sgi-irix5*)
1905 (mips*-sgi-irix6*, mips*-*-linux*, mips*-*-netbsd*)
1906 (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
1907 (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-aix*, rs6000-*-*)
1908 (powerpc-*-linux*, powerpc64-*-linux*, powerpc*-*-*, s390*-*-*)
1909 (sh*-*-linux*, sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
1910 (sparc-*-linux*, sparc64-*-linux*, sparc*-*-freebsd*)
1911 (sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*, sparc-*-knetbsd*-gnu)
1912 (sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu, sparc-*-openbsd*)
1913 (sparc64-*-openbsd*, sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*)
1914 (sparc-*-solaris2*, sparcv9-*-solaris2*, sparc64-*-solaris2*)
1915 (vax-*-netbsd*, vax-*-knetbsd*-gnu, x86_64-*-darwin*, x86_64-*-dicos*)
1916 (x86_64-*-linux*, x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu)
1917 (x86_64-*-netbsd*, x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*)
1918 (xtensa*-*-linux*, xtensa*): Remove solib.o from gdb_target_obs.
1920 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1922 Remove the gdbtui binary.
1923 * .gitignore (/gdbtui): Remove.
1924 * Makefile.in (TUI): Remove.
1925 (SUBDIR_TUI_OBS): Remove tui-main.o.
1926 (SUBDIR_TUI_SRCS): Remove tui/tui-main.c.
1927 (all-tui, install-tui, uninstall-tui, $(TUI)$(EXEEXT), clean-tui)
1928 (tui-main.o): Remove.
1929 (all_object_files): Remove tui-main.o.
1930 * NEWS: New note for the gdbtui removal.
1931 * configure: Rebuilt.
1932 * configure.ac: No longer add all-tui, clean-tui, install-tui and
1933 uninstall-tui to CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL and
1934 CONFIG_UNINSTALL respectively.
1935 * gdb.c (main): Remove args.interpreter_p initialization.
1936 * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
1937 * main.h (struct captured_main_args): Remove interpreter_p.
1938 * tui/tui-main.c: Remove.
1940 2012-01-01 Doug Evans <dje@google.com>
1942 * dwarf2read.c (dwarf2_compute_name): Simplify objfile references.
1943 (dwarf2_physname, read_import_statement): Ditto.
1944 (read_call_site_scope, dwarf2_record_block_ranges): Ditto.
1945 (process_structure_scope read_subroutine_type): Ditto.
1946 (read_typedef, load_partial_dies, read_partial_die): Ditto.
1947 (find_partial_die, dwarf_decode_lines, lookup_die_type): Ditto.
1948 (dwarf2_fetch_die_location_block): Ditto.
1949 (dwarf_decode_macros, dwarf2_symbol_mark_computed): Ditto.
1951 * dwarf2read.c (read_signatured_type): Delete `objfile' arg.
1952 All callers updated.
1953 (load_full_comp_unit, queue_comp_unit, process_queue): Ditto.
1954 (dw2_do_instantiate_symtab, dw2_instantiate_symtab): Ditto.
1955 (process_psymtab_comp_unit, load_partial_comp_unit): Ditto.
1957 * dwarf2read.c (load_cu): Move assert to more useful location.
1959 * dwarf2read.c (free_heap_comp_unit): Renamed from free_one_comp_unit.
1960 All callers updated.
1962 * dwarf2read.c (dwarf2_per_objfile): Add comment.
1963 (dwarf2_elf_names): Minor reformat.
1964 (dwarf2_per_cu_data): Tweak comment.
1965 (dwarf2_read_section): Fix comment.
1966 (create_all_comp_units): Fix comment.
1967 (load_full_comp_unit): Fix comment.
1968 (process_full_comp_unit): Fix comment.
1969 (read_signatured_type): Fix comment.
1971 For older changes see ChangeLog-2011.
1977 version-control: never