1 2014-02-07 Pedro Alves <palves@redhat.com>
3 * infrun.c (handle_signal_stop) <signal arrives while stepping
4 over a breakpoint>: Switch back to the stepping thread.
6 2014-02-07 Yao Qi <yao@codesourcery.com>
8 * target.c (target_xfer_partial): Return zero if LEN is zero.
10 2014-02-07 Yao Qi <yao@codesourcery.com>
12 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
13 (ld_so_xfer_auxv): Likewise.
14 * bfd-target.c (target_bfd_xfer_partial): Likewise.
15 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
16 * corelow.c (core_xfer_partial): Likewise.
17 * ctf.c (ctf_xfer_partial): Likewise.
18 * darwin-nat.c (darwin_read_dyld_info): Likewise.
19 (darwin_xfer_partial): Likewise.
20 * exec.c (exec_xfer_partial): Likewise.
21 * gnu-nat.c (gnu_xfer_partial): Likewise.
22 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
23 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
24 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
25 * linux-nat.c (linux_xfer_siginfo): Likewise.
26 (linux_proc_xfer_spu): Likewise.
27 * procfs.c (procfs_xfer_partial): Likewise.
28 * record-full.c (record_full_xfer_partial): Likewise.
29 (record_full_core_xfer_partial): Likewise.
30 * remote-sim.c (gdbsim_xfer_partial): Likewise.
31 * remote.c (remote_write_qxfer): Likewise.
32 (remote_write_qxfer, remote_read_qxfer): Likewise.
33 (remote_xfer_partial): Likewise.
34 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
35 (rs6000_xfer_shared_libraries): Likewise.
36 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
37 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
38 (spu_xfer_partial): Likewise.
39 * target.c (memory_xfer_partial_1): Likewise.
40 * tracepoint.c (tfile_xfer_partial): Likewise.
41 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
42 (windows_xfer_partial): Likewise.
44 2014-02-07 Yao Qi <yao@codesourcery.com>
46 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
48 (core_xfer_shared_libraries_aix): Likewise.
49 * gdbarch.c, gdbarch.h: Regenerated.
50 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
51 ULONGEST. Change 'len_avail' type to ULONGEST.
52 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
53 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
55 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
57 2014-02-07 Yao Qi <yao@codesourcery.com>
59 * corefile.c (memory_error): Get 'exception' from ERR and pass
60 'exception' to throw_error.
62 2014-02-06 Doug Evans <xdje42@gmail.com>
64 * configure.ac (libpython checking): Remove all but python.o from
65 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
66 * configure: Regenerate.
68 * Makefile.in (SFILES): Add extension.c.
69 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
70 (COMMON_OBS): Add extension.o.
71 * extension.h: New file.
72 * extension-priv.h: New file.
73 * extension.c: New file.
75 * python/python-internal.h: #include "extension.h".
76 (gdbpy_auto_load_enabled): Declare.
77 (gdbpy_apply_val_pretty_printer): Declare.
78 (gdbpy_apply_frame_filter): Declare.
79 (gdbpy_preserve_values): Declare.
80 (gdbpy_breakpoint_cond_says_stop): Declare.
81 (gdbpy_breakpoint_has_cond): Declare.
82 (void source_python_script_for_objfile): Delete.
83 * python/python.c: #include "extension-priv.h".
84 Delete inclusion of "observer.h".
85 (extension_language_python): Moved here and renamed from
86 script_language_python in py-auto-load.c.
87 Redefined to be of type extension_language_defn.
88 (python_extension_script_ops): New global.
89 (python_extension_ops): New global.
90 (struct python_env): New member previous_active.
91 (restore_python_env): Call restore_active_ext_lang.
92 (ensure_python_env): Call set_active_ext_lang.
93 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
95 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
97 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
99 (gdbpy_eval_from_control_command): Renamed from
100 eval_python_from_control_command, made static. New arg extlang.
101 (gdbpy_source_script) Renamed from source_python_script, made static.
103 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
104 result to int. New arg extlang.
105 (gdbpy_source_objfile_script): Renamed from
106 source_python_script_for_objfile, made static. New arg extlang.
107 (gdbpy_start_type_printers): Renamed from start_type_printers, made
108 static. New args extlang, extlang_printers. Change result type to
110 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
111 static. New arg extlang. Rename arg printers to extlang_printers
112 and change type to ext_lang_type_printers *.
113 (gdbpy_free_type_printers): Renamed from free_type_printers, made
114 static. Replace argument arg with extlang, extlang_printers.
115 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
116 (!HAVE_PYTHON, source_python_script): Delete.
117 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
118 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
119 (!HAVE_PYTHON, start_type_printers): Delete.
120 (!HAVE_PYTHON, apply_type_printers): Delete.
121 (!HAVE_PYTHON, free_type_printers): Delete.
122 (_initialize_python): Delete call to observer_attach_before_prompt.
123 (finalize_python): Set/restore active extension language.
124 (gdbpy_finish_initialization) Renamed from
125 finish_python_initialization, made static. New arg extlang.
126 (gdbpy_initialized): New function.
127 * python/python.h: #include "extension.h". Delete #include
128 "value.h", "mi/mi-cmds.h".
129 (extension_language_python): Declare.
130 (GDBPY_AUTO_FILE_NAME): Delete.
131 (enum py_bt_status): Moved to extension.h and renamed to
133 (enum frame_filter_flags): Moved to extension.h.
134 (enum py_frame_args): Moved to extension.h and renamed to
136 (finish_python_initialization): Delete.
137 (eval_python_from_control_command): Delete.
138 (source_python_script): Delete.
139 (apply_val_pretty_printer): Delete.
140 (apply_frame_filter): Delete.
141 (preserve_python_values): Delete.
142 (gdbpy_script_language_defn): Delete.
143 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
144 (start_type_printers, apply_type_printers, free_type_printers): Delete.
146 * auto-load.c: #include "extension.h".
147 (GDB_AUTO_FILE_NAME): Delete.
148 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
149 (script_language_gdb): Delete, moved to extension.c and renamed to
150 extension_language_gdb.
151 (source_gdb_script_for_objfile): Delete.
152 (auto_load_pspace_info): New member unsupported_script_warning_printed.
153 (loaded_script): Change type of language member to
154 struct extension_language_defn *.
155 (init_loaded_scripts_info): Initialize
156 unsupported_script_warning_printed.
157 (maybe_add_script): Make static. Change type of language arg to
158 struct extension_language_defn *.
159 (clear_section_scripts): Reset unsupported_script_warning_printed.
160 (auto_load_objfile_script_1): Rewrite to use extension language API.
161 (auto_load_objfile_script): Make public. Remove support-compiled-in
162 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
163 (source_section_scripts): Rewrite to use extension language API.
164 (load_auto_scripts_for_objfile): Rewrite to use
165 auto_load_scripts_for_objfile.
166 (collect_matching_scripts_data): Change type of language member to
167 struct extension_language_defn *.
168 (auto_load_info_scripts): Change type of language arg to
169 struct extension_language_defn *.
170 (unsupported_script_warning_print): New function.
171 (script_not_found_warning_print): Make static.
172 (_initialize_auto_load): Rewrite construction of scripts-directory
174 * auto-load.h (struct objfile): Add forward decl.
175 (struct script_language): Delete.
176 (struct auto_load_pspace_info): Add forward decl.
177 (struct extension_language_defn): Add forward decl.
178 (maybe_add_script): Delete.
179 (auto_load_objfile_script): Declare.
180 (script_not_found_warning_print): Delete.
181 (auto_load_info_scripts): Update prototype.
182 (auto_load_gdb_scripts_enabled): Declare.
183 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
184 auto_load_python_scripts_enabled and made public.
185 (script_language_python): Delete, moved to python.c.
186 (gdbpy_script_language_defn): Delete.
187 (info_auto_load_python_scripts): Update to use
188 extension_language_python.
190 * breakpoint.c (condition_command): Replace call to
191 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
192 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
193 with call to breakpoint_ext_lang_cond_says_stop.
194 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
195 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
196 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
197 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
199 (local_setattro): Print name of extension language with existing
202 * valprint.c (val_print, value_print): Update to call
203 apply_ext_lang_val_pretty_printer.
204 * cp-valprint.c (cp_print_value): Update call to
205 apply_ext_lang_val_pretty_printer.
206 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
207 (gdbpy_apply_val_pretty_printer): Renamed from
208 apply_val_pretty_printer. New arg extlang.
209 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
211 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
212 extension language API.
213 * cli/cli-script.c (execute_control_command): Update to call
214 eval_ext_lang_from_control_command.
216 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
217 enum ext_lang_bt_status values. Update call to
218 apply_ext_lang_frame_filter.
219 (mi_cmd_stack_list_locals): Ditto.
220 (mi_cmd_stack_list_args): Ditto.
221 (mi_cmd_stack_list_variables): Ditto.
222 * mi/mi-main.c: Delete #include "python/python-internal.h".
223 Add #include "extension.h".
224 (mi_cmd_list_features): Replace reference to python internal variable
225 gdb_python_initialized with call to ext_lang_initialized_p.
227 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
228 Update to use enum ext_lang_frame_args. Update to call
229 apply_ext_lang_frame_filter.
230 * python/py-framefilter.c (extract_sym): Update to use enum
232 (extract_value, py_print_type, py_print_value): Ditto.
233 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
234 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
235 (py_print_frame): Ditto.
236 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
237 New arg extlang. Update to use enum ext_lang_bt_status.
239 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
240 finish_python_initialization. Replace with call to
241 finish_ext_lang_initialization.
243 * typeprint.c (do_free_global_table): Update to call
244 free_ext_lang_type_printers.
245 (create_global_typedef_table): Update to call
246 start_ext_lang_type_printers.
247 (find_global_typedef): Update to call apply_ext_lang_type_printers.
248 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
249 (type_print_options): Change type of global_printers from "void *"
250 to "struct ext_lang_type_printers *".
252 * value.c (preserve_values): Update to call preserve_ext_lang_values.
253 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
254 (gdbpy_preserve_values): Renamed from preserve_python_values.
256 (!HAVE_PYTHON, preserve_python_values): Delete.
258 * utils.c (quit_flag): Delete, moved to extension.c.
259 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
262 * eval.c: Delete #include "python/python.h".
263 * main.c: Delete #include "python/python.h".
265 * defs.h: Update comment.
267 2014-02-06 Joel Brobecker <brobecker@adacore.com>
271 2014-02-05 Mark Kettenis <kettenis@gnu.org>
273 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
276 2014-02-05 Yao Qi <yao@codesourcery.com>
278 * remote.c (remote_pass_signals): Remove local 'buf' and use
280 (remote_program_signals): Likewise.
282 2014-02-05 Yao Qi <yao@codesourcery.com>
284 * ctf.c: Include "inferior.h" and "gdbthread.h".
285 (CTF_PID): A new macro.
286 (ctf_open): Call inferior_appeared and add_thread_silent.
287 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
288 (ctf_thread_alive): New function.
289 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
291 2014-02-05 Yao Qi <yao@codesourcery.com>
295 2013-05-24 Yao Qi <yao@codesourcery.com>
297 * tracepoint.c (TFILE_PID): Remove.
298 (tfile_open): Don't add thread and inferior.
299 (tfile_close): Don't set 'inferior_ptid'. Don't call
300 exit_inferior_silent.
301 (tfile_thread_alive): Remove.
302 (init_tfile_ops): Don't set field 'to_thread_alive' of
305 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
307 * remote.c (remote_start_remote): Call remote_check_symbols even
308 if only symbol-file (not file) has been given.
310 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
312 * gdbarch.sh (skip_entrypoint): New callback.
313 * gdbarch.c, gdbarch.h: Regenerate.
314 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
315 * infrun.c (fill_in_stop_func): Likewise.
316 * ppc-linux-tdep.c: Include "elf/ppc64.h".
317 (ppc_elfv2_elf_make_msymbol_special): New function.
318 (ppc_elfv2_skip_entrypoint): Likewise.
319 (ppc_linux_init_abi): Install them for ELFv2.
321 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
323 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
324 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
325 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
326 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
327 structures returned in GPRs.
329 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
331 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
332 offset to the stack parameter list for the ELFv2 ABI.
334 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
336 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
337 set_gdbarch_convert_from_func_ptr_addr and
338 set_gdbarch_elf_make_msymbol_special for ELFv1.
339 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
340 function descriptors on ELFv1.
341 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
342 set up r12 at function entry.
344 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
346 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
347 (struct gdbarch_tdep): New member elf_abi.
349 * rs6000-tdep.c: Include "elf/ppc64.h".
350 (rs6000_gdbarch_init): Detect ELF ABI version.
352 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
354 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
355 within a register pair holding a DFP 128-bit value on little-endian.
356 (ppc64_sysv_abi_return_value_base): Likewise.
357 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
358 (dfp_pseudo_register_write): Likewise.
360 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
362 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
363 offset on little-endian when passing _Decimal32.
364 (ppc64_sysv_abi_return_value_base): Likewise for return values.
366 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
368 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
369 of the overlapped FP register within the VSX register on little-
371 (efpr_pseudo_register_write): Likewise.
373 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
375 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
376 offset on little-endian when passing small structures.
378 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
380 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
381 (struct ppc64_sysv_argpos): New data structure.
382 (ppc64_sysv_abi_push_float): Remove.
383 (ppc64_sysv_abi_push_val): New function.
384 (ppc64_sysv_abi_push_integer): Likewise.
385 (ppc64_sysv_abi_push_freg): Likewise.
386 (ppc64_sysv_abi_push_vreg): Likewise.
387 (ppc64_sysv_abi_push_param): Likewise.
388 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
389 (ppc64_sysv_abi_return_value_base): New function.
390 (ppc64_sysv_abi_return_value): Refactor to use it.
392 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
394 * NEWS: Document new target powerpc64le-*-linux*.
396 2014-02-04 Mark Kettenis <kettenis@gnu.org>
398 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
399 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
401 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
402 register set used in ELF core dumps. Add floating-point register set.
404 2014-02-03 Kevin Buettner <kevinb@redhat.com>
406 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
407 dwarf2_to_gdb[] table using symbolic constants. Adjust
408 penultimate entry from number representing the PC register
409 to symbolic constant representing the MDR register. Add
410 constant for the PC register to the end of the table.
412 2014-02-03 Mark Kettenis <kettenis@gnu.org>
414 * bsd-kvm.c: Include <sys/param.h>
416 2014-02-03 Mark Kettenis <kettenis@gnu.org>
418 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
420 2014-01-31 Joel Brobecker <brobecker@adacore.com>
422 * ada-lang.h (clear_ada_sym_cache): Delete.
424 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
426 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
428 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
430 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
431 the sigreturn register save area only if the syscall is
434 2014-01-29 Joel Brobecker <brobecker@adacore.com>
436 * valops.c (value_slice): Minor reformatting.
438 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
440 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
442 2014-01-28 Joel Brobecker <brobecker@adacore.com>
444 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
446 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
447 (ada_ignore_descriptive_types_p): New static global.
448 (find_parallel_type_by_descriptive_type): Return immediately
449 if ada_ignore_descriptive_types_p is set.
450 (_initialize_ada_language): Register new commands "maintenance
451 set ada", "maintenance show ada", "maintenance set ada
452 ignore-descriptive-types" and "maintenance show ada
453 ignore-descriptive-types".
454 * NEWS: Add entry for new "maint ada set/show
455 ignore-descriptive-types" commands.
457 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
459 * record-btrace.c (record_btrace_close): Call btrace_teardown
462 2014-01-27 Joel Brobecker <brobecker@adacore.com>
464 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
467 2014-01-27 Joel Brobecker <brobecker@adacore.com>
469 * ada-typeprint (type_is_full_subrange_of_target_type):
471 (print_range): Add parameter bounds_prefered_p. If not set,
472 try printing range types using the name of their base type.
473 (print_range_type): Add parameter bounds_prefered_p.
474 Use it in call to print_range.
475 (print_array_type, ada_print_type): Update calls to print_range
476 and print_range_type.
478 2014-01-27 Joel Brobecker <brobecker@adacore.com>
480 * ada-typeprint.c (print_array_type, print_choices, print_range)
481 (print_range_bound, print_dynamic_range_bound, print_range_type):
484 2014-01-27 Joel Brobecker <brobecker@adacore.com>
486 * ada-typeprint.c (print_range): Add missing empty line
487 after local declaration.
489 2014-01-27 Joel Brobecker <brobecker@adacore.com>
491 * ada-valprint.c (print_optional_low_bound): Get index_type's
492 target type for as long as it is a TYPE_CODE_RANGE.
494 2014-01-27 Joel Brobecker <brobecker@adacore.com>
496 * procfs.c (procfs_make_note_section): Remove assertion and
499 2014-01-24 Yao Qi <yao@codesourcery.com>
501 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
502 * corelow.c (get_core_siginfo): Likewise.
504 2014-01-24 Yao Qi <yao@codesourcery.com>
506 * remote.c (remote_write_bytes_aux): Change type of 'len' to
507 ULONGEST. Don't check 'len' is negative.
508 (remote_write_bytes): Change type of 'len' to ULONGEST.
510 2014-01-23 Tom Tromey <tromey@redhat.com>
513 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
514 Handle exception from frame.block.
515 (FrameVars.fetch_frame_locals): Likewise.
517 2014-01-23 Tom Tromey <tromey@redhat.com>
520 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
521 on a NULL pointer. Move "goto error" to correct place.
523 2014-01-23 Tom Tromey <tromey@redhat.com>
526 * python/py-framefilter.c (apply_frame_filter): Call
527 ensure_python_env after computing gdbarch.
529 2014-01-23 Yao Qi <yao@codesourcery.com>
531 * target.c (raw_memory_xfer_partial): Change argument type
532 from void * to gdb_byte *.
533 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
535 2014-01-22 Doug Evans <dje@google.com>
537 New gdbserver option --debug-format=timestamp.
540 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
542 * syscalls/s390x-linux.xml: New file.
543 * syscalls/s390-linux.xml: New file.
544 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
545 (XML_SYSCALL_FILENAME_S390X): Likewise.
546 (op_svc): New enum value for SVC opcode.
547 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
548 (s390_linux_get_syscall_number): New function.
549 (s390_gdbarch_init): Register '*get_syscall_number' and the
550 syscall xml file name.
551 * data-directory/Makefile.in (SYSCALLS_FILES): Add
552 "s390-linux.xml" and "s390x-linux.xml".
553 * NEWS: Announce new feature.
555 2014-01-22 Baruch Siach <baruch@tkos.co.il>
557 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
559 2014-01-22 Pedro Alves <palves@redhat.com>
561 * xtensa-config.c: Include defs.h.
563 2014-01-22 Joel Brobecker <brobecker@adacore.com>
565 * common/common-utils.h: Add "ARI:" comment beside __func__
568 2014-01-22 Joel Brobecker <brobecker@adacore.com>
570 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
573 2014-01-21 Roland McGrath <mcgrathr@google.com>
575 * configure.ac: Call AM_PROG_INSTALL_STRIP.
576 * configure: Regenerate.
577 * aclocal.m4: Regenerate.
578 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
579 New substituted variables.
580 (install-strip): New target.
581 (INSTALL_SCRIPT): New substituted variable.
582 (FLAGS_TO_PASS): Add it.
583 (install-only): Use $(INSTALL_SCRIPT) rather than
584 $(INSTALL_PROGRAM) for gcore.
586 2014-01-20 Tom Tromey <tromey@redhat.com>
588 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
591 2014-01-20 Tom Tromey <tromey@redhat.com>
593 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
594 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
595 (deprecated_cmd_warning, complete_on_cmdlist): Update.
596 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
597 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
598 (struct cmd_list_element) <flags>: Remove.
599 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
600 doc_allocated>: New fields.
601 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
603 * maint.c (maintenance_do_deprecate): Update.
604 * top.c (execute_command): Update.
606 2014-01-20 Baruch Siach <baruch@tkos.co.il>
608 * xtensa-linux-nat.c: Include asm/ptrace.h.
610 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
612 * Makefile.in (SFILES): Add d-support.c.
613 (COMMON_OBS): Add d-support.o.
614 * d-lang.h (d_parse_symbol): Add comment, now defined in
616 * d-lang.c (parse_call_convention)
617 (parse_attributes, parse_function_types)
618 (parse_function_args, parse_type, parse_identifier)
619 (call_convention_p, d_parse_symbol): Move functions to ...
620 * d-support.c: ... New file.
622 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
624 * d-lang.h (d_parse_symbol): Add declaration.
625 * d-lang.c (extract_identifiers)
626 (extract_type_info): Remove functions.
627 (parse_call_convention, parse_attributes)
628 (parse_function_types, parse_function_args)
629 (parse_type, parse_identifier, call_convention_p)
630 (d_parse_symbol): New functions.
631 (d_demangle): Use d_parse_symbol to demangle D symbols.
633 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
635 * d-lang.h (struct builtin_d_type): New data type.
636 (builtin_d_type): Add declaration.
637 * d-lang.c (d_language_arch_info, build_d_types)
638 (builtin_d_type): New functions.
639 (enum d_primitive_types): New data type.
640 (d_language_defn): Change c_language_arch_info to
641 d_language_arch_info.
642 (d_type_data): New static variable.
643 (_initialize_d_language): Initialize d_type_data.
645 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
647 * d-lang.h (d_main_name): Add declaration.
648 * d-lang.c (d_main_name): New function.
649 * symtab.c (find_main_name): Add call to d_main_name.
651 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
653 * d-lang.c (d_language_defn): Change macro_expansion_c to
656 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
658 * MAINTAINERS: Add myself as a write-after-approval maintainer.
660 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
662 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
663 gdb_exception" declaration.
664 * remote.c (getpkt_or_notif_sane): Likewise.
666 2014-01-17 Doug Evans <dje@google.com>
668 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
669 function, contents of dirnames_to_char_ptr_vec_append moved here.
670 (delim_string_to_char_ptr_vec): New function.
671 (dirnames_to_char_ptr_vec_append): Rewrite.
672 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
674 2014-01-17 Doug Evans <dje@google.com>
676 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
678 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
679 #include "common-utils.h".
680 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
681 * common/vec.h (VEC_ASSERT_PASS): Update.
682 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
683 (MACH_CHECK_ERROR): Update.
685 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
687 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
689 * gdbarch.h: Regenerate.
691 2014-01-16 Tom Tromey <tromey@redhat.com>
693 * value.c (struct value) <regnum>: Move earlier.
695 2014-01-16 Tom Tromey <tromey@redhat.com>
697 * remote.c (extended_remote_create_inferior): Rename from
698 extended_remote_create_inferior_1. Add "ops" argument. Remove
701 2014-01-16 Pedro Alves <palves@redhat.com>
703 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
704 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
707 2014-01-16 Doug Evans <dje@google.com>
709 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
711 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
713 * btrace.h (btrace_thread_flag): New.
714 (struct btrace_thread_info) <flags>: New.
715 * record-btrace.c (record_btrace_resume_thread)
716 (record_btrace_find_thread_to_move, btrace_step_no_history)
717 (btrace_step_stopped, record_btrace_start_replaying)
718 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
719 (record_btrace_find_resume_thread): New.
720 (record_btrace_resume, record_btrace_wait): Extend.
721 (record_btrace_can_execute_reverse): New.
722 (record_btrace_open): Fail in non-stop mode.
723 (record_btrace_set_replay): Split into this, ...
724 (record_btrace_stop_replaying): ... this, ...
725 (record_btrace_clear_histories): ... and this.
726 (init_record_btrace_ops): Init to_can_execute_reverse.
729 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
731 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
732 (forward_target_decr_pc_after_break)
733 (target_decr_pc_after_break): New.
734 * target.c (forward_target_decr_pc_after_break)
735 (target_decr_pc_after_break): New.
736 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
737 instead of gdbarch_decr_pc_after_break.
738 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
739 instead of gdbarch_decr_pc_after_break.
740 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
741 instead of gdbarch_decr_pc_after_break.
742 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
743 instead of gdbarch_decr_pc_after_break.
744 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
745 instead of gdbarch_decr_pc_after_break.
746 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
747 instead of gdbarch_decr_pc_after_break.
749 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
751 * btrace.c: Include regcache.h.
752 (btrace_add_pc): New.
753 (btrace_enable): Call btrace_add_pc.
754 (btrace_is_empty): New.
755 * btrace.h (btrace_is_empty): New.
756 * record-btrace.c (require_btrace, record_btrace_info): Call
759 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
761 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
763 (linux_disable_btrace): Change return type.
764 * common/linux-btrace.h (linux_read_btrace): Change parameters
765 and return type to allow error reporting. Update users.
766 (linux_disable_btrace): Change return type. Update users.
767 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
770 (btrace_block) <begin>: Comment on BEGIN == 0.
771 * btrace.c (btrace_compute_ftrace): Start from the end of
773 (btrace_stitch_trace, btrace_clear_history): New.
774 (btrace_fetch): Read delta trace, return if replaying.
775 (btrace_clear): Move clear history code to btrace_clear_history.
776 (parse_xml_btrace): Throw an error if parsing failed.
777 * target.h (struct target_ops) <to_read_btrace>: Change parameters
778 and return type to allow error reporting.
779 (target_read_btrace): Change parameters and return type to allow
781 * target.c (target_read_btrace): Update.
782 * remote.c (remote_read_btrace): Support delta reads. Pass
786 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
788 * record.h (record_btrace_frame_unwind)
789 (record_btrace_tailcall_frame_unwind): New declarations.
790 * dwarf2-frame: Include record.h
791 (dwarf2_frame_cfa): Throw an error for btrace frames.
792 * record-btrace.c: Include hashtab.h.
793 (btrace_get_bfun_name): New.
794 (btrace_call_history): Call btrace_get_bfun_name.
795 (struct btrace_frame_cache): New.
797 (bfcache_hash, bfcache_eq, bfcache_new): New.
798 (btrace_get_frame_function): New.
799 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
800 (record_btrace_frame_this_id): Compute own id.
801 (record_btrace_frame_prev_register): Provide PC, throw_error
802 for all other registers.
803 (record_btrace_frame_sniffer): Detect btrace frames.
804 (record_btrace_tailcall_frame_sniffer): New.
805 (record_btrace_frame_dealloc_cache): New.
806 (record_btrace_frame_unwind): Add new functions.
807 (record_btrace_tailcall_frame_unwind): New.
808 (_initialize_record_btrace): Allocate cache.
809 * btrace.c (btrace_clear): Call reinit_frame_cache.
812 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
814 * record-btrace.c (record_btrace_set_replay)
815 (record_btrace_goto_begin, record_btrace_goto_end)
816 (record_btrace_goto): New.
817 (init_record_btrace_ops): Initialize them.
820 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
822 * record-btrace.c (record_btrace_find_new_threads)
823 (record_btrace_thread_alive): New.
824 (init_record_btrace_ops): Initialize to_find_new_threads and
827 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
829 * record-btrace.c (record_btrace_resume): New.
830 (record_btrace_wait): New.
831 (init_record_btrace_ops): Initialize to_wait and to_resume.
833 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
835 * record-btrace.c (record_btrace_xfer_partial)
836 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
837 (record_btrace_allow_memory_access): New.
838 (init_record_btrace_ops): Initialize new methods.
839 * target.c (raw_memory_xfer_partial): Bail out if target reports
840 that this memory is not available.
842 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
844 * target.h (target_ops) <to_insert_breakpoint>
845 <to_remove_breakpoint>: Add target_ops parameter.
846 (forward_target_insert_breakpoint): New.
847 (forward_target_remove_breakpoint): New.
848 (memory_remove_breakpoint, memory_insert_breakpoint):
849 Add target_ops parameter.
850 * target.c (target_insert_breakpoint): Split into this and ...
851 (forward_target_insert_breakpoint): ... this.
852 (target_remove_breakpoint): Split into this and ...
853 (forward_target_remove_breakpoint): ... this.
854 (debug_to_insert_breakpoint): Add target_ops parameter.
855 Call forward_target_insert_breakpoint.
856 (debug_to_remove_breakpoint): Add target_ops parameter.
857 Call forward_target_remove_breakpoint.
858 (update_current_target): Do not inherit or default to_insert_breakpoint
859 and to_remove_breakpoint.
860 * corelow.c (ignore): Add target_ops parameter.
861 * exec.c (ignore): Add target_ops parameter.
862 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
863 Add target_ops parameter.
864 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
865 Add target_ops parameter.
866 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
867 Add target_ops parameter.
868 * record-full.c (record_full_beneath_to_insert_breakpoint)
869 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
870 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
871 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
872 (record_full_core_remove_breakpoint): Add target_ops parameter.
874 (record_full_beneath_to_insert_breakpoint_ops)
875 (record_full_beneath_to_remove_breakpoint_ops)
876 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
877 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
878 tmp_to_remove_breakpoint_ops,
879 record_full_beneath_to_insert_breakpoint_ops, and
880 record_full_beneath_to_remove_breakpoint_ops.
881 * remote-m32r-sdi.c (m32r_insert_breakpoint)
882 (m32r_remove_breakpoint): Add target_ops parameter.
883 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
884 Add target_ops parameter.
885 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
886 Add target_ops parameter.
888 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
889 Markus Metzger <markus.t.metzger@intel.com>
891 * record-btrace.c: Include frame-unwind.h.
892 (record_btrace_frame_unwind_stop_reason)
893 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
894 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
896 (init_record_btrace_ops): Install it.
898 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
900 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
903 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
905 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
908 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
910 * frame-unwind.c: Include target.h.
911 (frame_unwind_try_unwinder): New function with code from ...
912 (frame_unwind_find_by_frame): ... here. New variable
913 unwinder_from_target, call also target_get_unwinder)
914 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
915 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
916 * target.h (struct target_ops): New fields to_get_unwinder and
917 to_get_tailcall_unwinder.
918 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
920 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
922 * record-btrace.c (record_btrace_fetch_registers)
923 (record_btrace_store_registers)
924 (record_btrace_to_prepare_to_store): New.
925 (init_record_btrace_ops): Add the above.
927 2014-01-16 Tom Tromey <tromey@redhat.com>
929 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
930 * target.h (struct target_ops) <to_prepare_to_store>: Add
932 (target_prepare_to_store): Add argument.
933 * target.c (debug_to_prepare_to_store): Add argument.
934 (update_current_target): Update.
935 * remote.c (remote_prepare_to_store): Add 'self' argument.
936 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
937 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
938 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
939 * record-full.c (record_full_core_prepare_to_store): Add 'self'
941 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
942 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
943 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
944 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
945 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
947 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
949 * btrace.h (replay) <replay>: New.
950 (btrace_is_replaying): New.
951 * btrace.c (btrace_clear): Free replay iterator.
952 (btrace_is_replaying): New.
953 * record-btrace.c (record_btrace_is_replaying): New.
954 (record_btrace_info): Print insn number if replaying.
955 (record_btrace_insn_history): Start at replay position.
956 (record_btrace_call_history): Start at replay position.
957 (init_record_btrace_ops): Init to_record_is_replaying.
959 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
961 * record-btrace.c (record_btrace_insn_history_range): Include
963 (record_btrace_insn_history_from): Adjust range.
964 (record_btrace_call_history_range): Include
966 (record_btrace_call_history_from): Adjust range.
967 * NEWS: Announce changes.
969 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
971 * record.h (enum record_print_flag)
972 <record_print_indent_calls>: New.
973 * record.c (get_call_history_modifiers): Recognize /c modifier.
974 (_initialize_record): Document /c modifier.
975 * record-btrace.c (btrace_call_history): Add btinfo parameter.
976 Reorder fields. Optionally indent the function name. Update
978 * NEWS: Announce changes.
980 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
982 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
984 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
986 * btrace.c (ftrace_new_function): Start counting at one.
987 * record-btrace.c (record_btrace_info): Adjust number of calls
991 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
993 * record-btrace.c (btrace_call_history_insn_range): Print
994 insn range as [begin, end].
996 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
998 * btrace.h (struct btrace_func_link): New.
999 (enum btrace_function_flag): New.
1000 (struct btrace_inst): Rename to ...
1001 (struct btrace_insn): ...this. Update all users.
1002 (struct btrace_func) <ibegin, iend>: Remove.
1003 (struct btrace_func_link): New.
1004 (struct btrace_func): Rename to ...
1005 (struct btrace_function): ...this. Update all users.
1006 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1007 (number, level, flags>: New.
1008 (struct btrace_insn_iterator): Rename to ...
1009 (struct btrace_insn_history): ...this.
1011 (struct btrace_insn_iterator, btrace_call_iterator): New.
1012 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1013 (struct btrace_target_info) <begin, end, level>
1014 <insn_history, call_history>: New.
1015 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1016 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1017 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1018 (btrace_call_number, btrace_call_begin, btrace_call_end)
1019 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1020 (btrace_find_function_by_number, btrace_set_insn_history)
1021 (btrace_set_call_history): New.
1022 * btrace.c (btrace_init_insn_iterator)
1023 (btrace_init_func_iterator, compute_itrace): Remove.
1024 (ftrace_print_function_name, ftrace_print_filename)
1025 (ftrace_skip_file): Change
1027 (ftrace_init_func): Remove.
1028 (ftrace_debug): Use new btrace_function fields.
1029 (ftrace_function_switched): Also consider gaining and
1030 losing symbol information).
1031 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1032 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1033 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1035 (ftrace_new_function): Move. Remove debug print.
1036 (ftrace_update_lines, ftrace_update_insns): New.
1037 (ftrace_update_function): Check for call, ret, and jump.
1038 (compute_ftrace): Renamed to ...
1039 (btrace_compute_ftrace): ...this. Rewritten to compute call
1041 (btrace_fetch, btrace_clear): Updated.
1042 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1043 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1044 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1045 (btrace_call_number, btrace_call_begin, btrace_call_end)
1046 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1047 (btrace_find_function_by_number, btrace_set_insn_history)
1048 (btrace_set_call_history): New.
1049 * record-btrace.c (require_btrace): Use new btrace thread
1051 (record_btrace_info, btrace_insn_history)
1052 (record_btrace_insn_history, record_btrace_insn_history_range):
1053 Use new btrace thread info fields and new iterator.
1054 (btrace_func_history_src_line): Rename to ...
1055 (btrace_call_history_src_line): ...this. Use new btrace
1057 (btrace_func_history): Rename to ...
1058 (btrace_call_history): ...this. Use new btrace thread info
1059 fields and new iterator.
1060 (record_btrace_call_history, record_btrace_call_history_range):
1061 Use new btrace thread info fields and new iterator.
1063 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1065 * frame.h (frame_id_build_unavailable_stack_special): New.
1066 * frame.c (frame_id_build_unavailable_stack_special): New.
1068 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1070 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1071 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1072 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1074 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1075 (i386_insn_is_jump, i386_jmp_p): New.
1076 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1077 insn_is_jump to gdbarch.
1078 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1079 * gdbarch.h: Regenerated.
1080 * gdbarch.c: Regenerated.
1081 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1082 (default_insn_is_jump): New.
1083 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1084 (default_insn_is_jump): New.
1086 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1088 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1090 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1091 (btrace_read_type) <btrace_read_new>: Change to ...
1092 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1094 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1096 * common/linux-btrace.c (linux_read_btrace): Free trace from
1099 2014-01-15 Doug Evans <dje@google.com>
1101 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1104 2014-01-15 Tom Tromey <tromey@redhat.com>
1106 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1107 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1108 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1109 (set_objfile_main_name): New function.
1110 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1111 language_of_main>: New fields.
1112 (set_objfile_main_name): Declare.
1113 * symtab.c (find_main_name): Loop over objfiles to find the main
1115 (set_main_name): Now static.
1116 (get_main_info): Add comment.
1117 * symtab.h (set_main_name): Don't declare.
1119 2014-01-15 Tom Tromey <tromey@redhat.com>
1121 * symtab.c (main_progspace_key): New global.
1122 (struct main_info): New.
1123 (name_of_main, language_of_main): Remove.
1124 (get_main_info, main_info_cleanup): New function.
1125 (set_main_name, main_name, main_language): Use get_main_info.
1126 (_initialize_symtab): Initialize main_progspace_key.
1128 2014-01-15 Tom Tromey <tromey@redhat.com>
1130 * dbxread.c (process_one_symbol): Update.
1131 * dwarf2read.c (read_partial_die): Update.
1132 * symfile.c (set_initial_language): Call main_language.
1133 * symtab.c (language_of_main): Now static.
1134 (set_main_name): Add 'lang' parameter.
1135 (find_main_name): Update.
1136 (main_language): New function.
1137 (symtab_observer_executable_changed): Update.
1138 * symtab.h (set_main_name): Update.
1139 (language_of_main): Remove.
1140 (main_language): Declare.
1142 2014-01-15 Tom Tromey <tromey@redhat.com>
1144 * symfile.c (init_entry_point_info): Use new "initialized" field.
1146 * objfiles.h (struct entry_point) <initialized>: New field.
1147 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1148 (struct objfile) <ei>: ...here. Remove.
1149 * objfiles.c (entry_point_address_query): Update.
1151 2014-01-15 Tom Tromey <tromey@redhat.com>
1153 * objfiles.c (entry_point_address_query): Relocate entry point
1155 (objfile_relocate1): Do not relocate entry point address.
1156 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1157 <the_bfd_section_index>: New field.
1158 * symfile.c (init_entry_point_info): Find the entry point's
1161 2014-01-15 Tom Tromey <tromey@redhat.com>
1163 * solib-frv.c (enable_break): Use entry_point_address_query.
1165 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1167 * NEWS: Add note on improved process record-replay on
1168 arm*-linux* targets.
1170 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1172 * arm-tdep.c (enum arm_record_result): New enum.
1173 (arm_record_unsupported_insn): New function.
1174 (arm_record_coproc_data_proc): Removed.
1175 (thumb2_record_ld_st_multiple): New function.
1176 (thumb2_record_ld_st_dual_ex_tbb): New function.
1177 (thumb2_record_data_proc_sreg_mimm): New function.
1178 (thumb2_record_ps_dest_generic): New function.
1179 (thumb2_record_branch_misc_cntrl): New function.
1180 (thumb2_record_str_single_data): New function.
1181 (thumb2_record_ld_mem_hints): New function.
1182 (thumb2_record_ld_word): New function.
1183 (thumb2_record_lmul_lmla_div): New function.
1184 (thumb2_record_decode_insn_handler): New function.
1185 (decode_insn): Add thumb32 instruction handlers.
1187 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1189 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1190 (struct arm_linux_record_tdep): Declare.
1191 (arm_canonicalize_syscall): New function.
1192 (arm_all_but_pc_registers_record): New function.
1193 (arm_linux_syscall_record): New function.
1194 (arm_linux_init_abi): Add syscall recording constructs.
1195 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1196 decoding. (arm_record_coproc_data_proc): Update arm syscall
1198 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1199 <arm_syscall_record>: New field.
1200 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1203 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1205 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1206 register for push instruction recording.
1208 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1210 * arm-tdep.c (thumb_record_misc): Update to correct logical
1211 error while recording ldm, ldmia and pop instructions.
1213 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1215 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1217 2014-01-15 Pedro Alves <palves@redhat.com>
1219 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1220 (go32_resume, go32_fetch_registers, store_register)
1221 (go32_store_registers, go32_prepare_to_store)
1222 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1223 (go32_create_inferior, go32_can_run, go32_terminal_init)
1224 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1227 2014-01-15 Tom Tromey <tromey@redhat.com>
1229 * target.h (async_callback_ftype): New typedef.
1230 (struct target_ops) <to_async>: Use it.
1232 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1234 * python/py-value.c (get_field_type): Remove unnecessary curly
1235 braces for single-statement if block.
1237 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1239 * python/py-type.c (convert_field): Add missing empty line
1242 2014-01-14 Doug Evans <dje@google.com>
1244 * symfile.h (expand_symtabs_matching): Renamed from
1245 expand_partial_symbol_names. Update prototype.
1246 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1247 * symfile.c (expand_symtabs_matching): Renamed from
1248 expand_partial_symbol_names. New args file_matcher, kind.
1249 Rename arg fun to symbol_matcher.
1250 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1251 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1252 ada_expand_partial_symbol_name.
1253 (ada_make_symbol_completion_list): Update to call
1254 expand_symtabs_matching.
1255 (ada_add_global_exceptions): Call expand_symtabs_matching.
1256 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1257 call map_symbol_filenames.
1258 * symtab.c (sources_info): Update to call map_symbol_filenames.
1259 (search_symbols): Call expand_symtabs_matching.
1260 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1261 (default_make_symbol_completion_list_break_on): Update to call
1262 expand_symtabs_matching.
1263 (make_source_files_completion_list): Update to call
1264 map_symbol_filenames.
1266 2014-01-14 Doug Evans <dje@google.com>
1268 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1269 (expand_symtabs_symbol_matcher_ftype): New typedef.
1270 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1271 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1272 * symfile.c (expand_partial_symbol_names): Update to use
1273 expand_symtabs_symbol_matcher_ftype.
1274 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1275 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1276 Arg name_matcher renamed to symbol_matcher.
1277 * psymtab.c (recursively_search_psymtabs): Update to use
1278 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1280 (expand_symtabs_matching_via_partial): Update to use
1281 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1282 Arg name_matcher renamed to symbol_matcher.
1284 2014-01-14 Doug Evans <dje@google.com>
1286 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1287 (map_partial_symbol_filenames): Ditto.
1288 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1289 (map_partial_symbol_filenames): Ditto.
1290 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1291 (map_partial_symbol_filenames): Ditto.
1292 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1293 (map_partial_symbol_filenames): Ditto.
1294 * symtab.c: Delete #include "psymtab.h".
1296 2014-01-14 Pedro Alves <palves@redhat.com>
1297 Tom Tromey <tromey@redhat.com>
1299 * infrun.c (use_displaced_stepping): Use find_record_target
1300 instead of RECORD_IS_USED.
1301 (adjust_pc_after_break): Use record_full_is_used instead of
1303 * record-btrace.c (record_btrace_open): Call record_preopen
1304 instead of checking RECORD_IS_USED.
1305 * record-full.c (record_full_shortname)
1306 (record_full_core_shortname): New globals.
1307 (record_full_is_used): New function.
1308 (find_full_open): Call record_preopen instead of checking
1310 (init_record_full_ops): Set the target's shortname to
1311 record_full_shortname.
1312 (init_record_full_core_ops): Set the target's shortname to
1313 record_full_core_shortname.
1314 * record-full.h (record_full_is_used): Declare.
1315 * record.c (find_record_target): Make extern.
1316 (record_preopen): New function.
1317 * record.h (RECORD_IS_USED): Delete macro.
1318 (find_record_target, record_preopen): Declare functions.
1320 2014-01-14 Yao Qi <yao@codesourcery.com>
1322 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1323 'len''s type to ULONGEST.
1324 (core_xfer_shared_libraries_aix): Likewise.
1325 * gdbarch.c, gdbarch.h: Regenerated.
1326 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1327 Change type of 'len' to ULONGEST.
1328 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1329 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1331 2014-01-14 Yao Qi <yao@codesourcery.com>
1333 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1334 type of 'len' to ULONGEST.
1335 (linux_xfer_osdata_processgroups): Likewise.
1336 (linux_xfer_osdata_threads): Likewise.
1337 (linux_xfer_osdata_fds): Likewise.
1338 (linux_xfer_osdata_isockets): Likewise.
1339 (linux_xfer_osdata_shm): Likewise.
1340 (linux_xfer_osdata_sem): Likewise.
1341 (linux_xfer_osdata_msg): Likewise.
1342 (linux_common_xfer_osdata): Likewise.
1343 (struct osdata_type) <getter>: Likewise.
1344 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1347 2014-01-14 Yao Qi <yao@codesourcery.com>
1349 * target.h (target_xfer_partial_ftype): Update.
1350 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1352 * aix-thread.c (aix_thread_xfer_partial): Change type of
1353 argument 'len' to ULONGEST.
1354 * auxv.c (procfs_xfer_auxv): Likewise.
1355 (ld_so_xfer_auxv): Likewise.
1356 (memory_xfer_auxv): Likewise.
1357 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1358 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1359 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1360 * corelow.c (core_xfer_partial): Likewise.
1361 * ctf.c (ctf_xfer_partial): Likewise.
1362 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1364 (darwin_read_dyld_info): Likewise.
1365 (darwin_xfer_partial): Likewise.
1366 * exec.c (section_table_xfer_memory_partial): Likewise.
1367 (exec_xfer_partial): Likewise.
1368 * exec.h (section_table_xfer_memory_partial): Update
1370 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1371 instead of plongest.
1372 (gnu_xfer_partial): Likewise.
1373 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1374 (ia64_hpux_xfer_solib_got): Likewise.
1375 (ia64_hpux_xfer_partial): Likewise.
1376 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1377 * inf-ptrace.c (inf_ptrace_xfer_partial):
1378 * inf-ttrace.c (inf_ttrace_xfer_partial):
1379 * linux-nat.c (linux_xfer_siginfo): Likewise.
1380 (linux_nat_xfer_partial): Likewise.
1381 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1382 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1383 * monitor.c (monitor_xfer_memory): Likewise.
1384 (monitor_xfer_partial): Likewise.
1385 * procfs.c (procfs_xfer_partial): Likewise.
1386 * record-full.c (record_full_xfer_partial): Likewise.
1387 (record_full_core_xfer_partial): Likewise.
1388 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1389 instead of plongest.
1390 (gdbsim_xfer_partial): Likewise.
1391 * remote.c (remote_xfer_partial): Likewise.
1392 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1393 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1395 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1396 (rs6000_xfer_shared_libraries): Likewise.
1397 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1398 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1399 (sparc_xfer_partial): Likewise.
1400 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1401 (spu_xfer_partial): Likewise.
1402 * spu-multiarch.c (spu_xfer_partial): Likewise.
1403 * target.c (target_read_live_memory): Likewise.
1404 (memory_xfer_live_readonly_partial): Likewise.
1405 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1406 (target_xfer_partial, default_xfer_partial): Likewise.
1407 (current_xfer_partial): Likewise.
1408 * tracepoint.c (tfile_xfer_partial): Likewise.
1409 * windows-nat.c (windows_xfer_memory): Likewise. Call
1410 pulongest instead of plongest.
1411 (windows_xfer_partial): Likewise.
1412 (windows_xfer_shared_libraries): Likewise.
1414 2014-01-14 Yao Qi <yao@codesourcery.com>
1416 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1417 target_xfer_partial_ftype.
1419 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1423 * valops.c (value_struct_elt_bitpos): New function
1424 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1425 object to 'None' if the field name is an empty string ("").
1426 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1427 attribute to look for a field when 'name' is 'None'.
1428 (get_field_type): New function
1430 2014-01-13 Doug Evans <dje@google.com>
1433 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1434 (try_open_dwop_file): Ditto.
1435 * gdb_bfd.c: #include "vec.h".
1436 (bfdp): New typedef.
1437 (struct gdb_bfd_data): New member included_bfds.
1438 (gdb_bfd_unref): Unref all included bfds.
1439 (gdb_bfd_record_inclusion): New function.
1440 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1442 2014-01-13 Tom Tromey <tromey@redhat.com>
1444 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1446 2014-01-13 Tom Tromey <tromey@redhat.com>
1448 * defs.h (use_windows): Remove.
1449 * gdb.c (main): Update.
1450 * main.c (captured_main, gdb_main): Update.
1451 * main.h (struct captured_main_args) <use_windows>: Remove.
1452 * top.c (use_windows): Remove.
1454 2014-01-13 Tom Tromey <tromey@redhat.com>
1456 * defs.h (deprecated_flush_hook): Remove.
1458 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1461 * linux-thread-db.c (try_thread_db_load): Add parameter
1462 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1463 (try_thread_db_load_from_pdir_1): Move it there from here.
1464 (try_thread_db_load_from_sdir): Update caller.
1465 (try_thread_db_load_from_dir): Move it there from here.
1467 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1469 * regformats/regdat.sh: Always rewrite the register file.
1471 2014-01-13 Pedro Alves <palves@redhat.com>
1473 * Makefile.in (CHECK_HEADERS): New variable.
1474 (check-headers:): New rule.
1476 2014-01-13 Tom Tromey <tromey@redhat.com>
1478 * cli/cli-setshow.c (do_set_command): Update.
1479 * defs.h (deprecated_set_hook): Remove.
1480 * top.c (deprecated_set_hook): Remove.
1482 2014-01-13 Pedro Alves <palves@redhat.com>
1484 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1485 the tracepoint if the PC is a pseudo-register.
1487 2014-01-13 Tom Tromey <tromey@redhat.com>
1489 * defs.h (XCALLOC): Remove.
1490 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1491 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1492 * dwarf2loc.c (allocate_piece_closure): Likewise.
1493 * elfread.c (elf_symfile_segments): Likewise.
1494 (elf_symfile_segments): Likewise.
1495 * gdbtypes.c (copy_type_recursive): Likewise.
1496 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1497 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1498 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1500 * mt-tdep.c (mt_gdbarch_init): Likewise.
1501 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1503 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1504 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1505 * registry.c (registry_alloc_data): Likewise.
1506 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1507 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1508 * serial.c (serial_fdopen_ops): Likewise.
1509 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1511 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1512 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1515 2014-01-13 Tom Tromey <tromey@redhat.com>
1517 * defs.h (XMALLOC): Remove.
1518 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1519 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1520 * cli-out.c (struct ui_out *): Likewise.
1521 * cli/cli-dump.c (add_dump_command): Likewise.
1522 (add_dump_command): Likewise.
1523 * complaints.c (get_complaints): Likewise.
1524 (find_complaint): Likewise.
1525 * dwarf2-frame.c (execute_cfa_program): Likewise.
1526 * dwarf2read.c (abbrev_table_read_table): Likewise.
1527 * gdbarch.sh: Likewise.
1528 * gdbarch.c: Rebuild.
1529 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1530 * interps.c (interp_new): Likewise.
1531 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1532 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1533 * mi/mi-console.c (mi_console_file_new): Likewise.
1534 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1535 * mi/mi-out.c (mi_out_new): Likewise.
1536 * mi/mi-parse.c (mi_parse): Likewise.
1537 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1538 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1539 * observer.c (xalloc_observer_list_node): Likewise.
1540 * regcache.c (regcache_xmalloc_1): Likewise.
1541 * reggroups.c (reggroup_new): Likewise.
1542 (_initialize_reggroup): Likewise.
1543 * registry.c (register_data_with_cleanup): Likewise.
1544 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1545 * ser-base.c (serial_ttystate): Likewise.
1546 * ser-mingw.c (make_pipe_state): Likewise.
1547 * ser-pipe.c (pipe_open): Likewise.
1548 * serial.c (serial_open): Likewise.
1549 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1550 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1551 (tui_alloc_win_info): Likewise.
1552 (tui_add_content_elements): Likewise.
1553 * tui/tui-file.c (tui_file_new): Likewise.
1554 * tui/tui-out.c (tui_out_new): Likewise.
1555 * ui-file.c (mem_file_new): Likewise.
1556 * ui-out.c (push_level): Likewise.
1557 (make_cleanup_ui_out_end): Likewise.
1558 (append_header_to_list): Likewise.
1559 (ui_out_new): Likewise.
1560 * user-regs.c (user_reg_add_builtin): Likewise.
1562 2014-01-13 Tom Tromey <tromey@redhat.com>
1564 * defs.h (XZALLOC): Remove.
1565 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1566 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1567 (get_ada_tasks_inferior_data): Likewise.
1568 * auto-load.c (get_auto_load_pspace_data): Likewise.
1569 * auxv.c (get_auxv_inferior_data): Likewise.
1570 * bfd-target.c (target_bfd_reopen): Likewise.
1571 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1572 (deprecated_insert_raw_breakpoint): Likewise.
1573 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1574 * corelow.c (core_open): Likewise.
1575 * darwin-nat.c (darwin_check_new_threads): Likewise.
1576 (darwin_attach_pid): Likewise.
1577 * dummy-frame.c (dummy_frame_push): Likewise.
1578 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1579 * dwarf2loc.c (allocate_piece_closure): Likewise.
1580 * elfread.c (elf_symfile_segments): Likewise.
1581 * eval.c (ptrmath_type_p): Likewise.
1582 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1583 * gdbtypes.c (alloc_type_arch): Likewise.
1584 (alloc_type_instance): Likewise.
1585 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1586 * inf-child.c (inf_child_can_use_agent): Likewise.
1587 * inflow.c (get_inflow_inferior_data): Likewise.
1588 * infrun.c (save_infcall_suspend_state): Likewise.
1589 * jit.c (jit_reader_load): Likewise.
1590 (get_jit_objfile_data): Likewise.
1591 (get_jit_program_space_data): Likewise.
1592 (jit_object_open_impl): Likewise.
1593 (jit_symtab_open_impl): Likewise.
1594 (jit_block_open_impl): Likewise.
1595 (jit_frame_sniffer): Likewise.
1596 * linux-fork.c (add_fork): Likewise.
1597 * maint.c (make_command_stats_cleanup): Likewise.
1598 * objfiles.c (get_objfile_pspace_data): Likewise.
1599 * opencl-lang.c (struct lval_closure): Likewise.
1600 * osdata.c (osdata_start_osdata): Likewise.
1601 * progspace.c (new_address_space): Likewise.
1602 (add_program_space): Likewise.
1603 * remote-sim.c (get_sim_inferior_data): Likewise.
1604 * sh-tdep.c (sh_gdbarch_init): Likewise.
1605 * skip.c (Ignore): Likewise.
1606 (skip_delete_command): Likewise.
1607 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1608 (library_list_start_library): Likewise.
1609 (solib_aix_current_sos): Likewise.
1610 * solib-darwin.c (get_darwin_info): Likewise.
1611 (darwin_current_sos): Likewise.
1612 * solib-dsbt.c (get_dsbt_info): Likewise.
1613 * solib-ia64-hpux.c (new_so_list): Likewise.
1614 (ia64_hpux_get_solib_linkage_addr): Likewise.
1615 * solib-spu.c (append_ocl_sos): Likewise.
1616 (spu_current_sos): Likewise.
1617 * solib-svr4.c (get_svr4_info): Likewise.
1618 (svr4_keep_data_in_core): Likewise.
1619 (library_list_start_library): Likewise.
1620 (svr4_default_sos): Likewise.
1621 (svr4_read_so_list): Likewise.
1622 * solib-target.c (library_list_start_library): Likewise.
1623 (solib_target_current_sos): Likewise.
1624 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1625 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1626 * symfile.c (default_symfile_segments): Likewise.
1627 * target-descriptions.c (tdesc_data_init): Likewise.
1628 (tdesc_create_reg): Likewise.
1629 (struct tdesc_type *): Likewise.
1630 (tdesc_create_vector): Likewise.
1631 (tdesc_set_struct_size): Likewise.
1632 (struct tdesc_type *): Likewise.
1633 (tdesc_free_feature): Likewise.
1634 (tdesc_create_feature): Likewise.
1635 * windows-nat.c (windows_add_thread): Likewise.
1636 (windows_make_so): Likewise.
1637 * xml-support.c (gdb_xml_body_text): Likewise.
1638 (gdb_xml_create_parser_and_cleanup): Likewise.
1639 (xml_process_xincludes): Likewise.
1640 * xml-syscall.c (allocate_syscalls_info): Likewise.
1641 (syscall_create_syscall_desc): Likewise.
1643 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1645 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1646 function, with code from i386_stap_parse_special_token.
1647 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1648 (i386_stap_parse_special_token): Move code to the two functions
1651 2014-01-09 Pedro Alves <palves@redhat.com>
1652 Hui Zhu <hui@codesourcery.com>
1655 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1656 bp_err_string. Don't mark the location shlib_disabled if the
1657 error thrown wasn't a generic or memory error. Catch errors
1658 thrown while inserting breakpoints in overlayed code. Output
1659 error message of software breakpoints.
1660 * remote.c (remote_insert_breakpoint): If this breakpoint has
1661 target-side commands but this stub doesn't support Z0 packets,
1662 throw NOT_SUPPORTED_ERROR error.
1663 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1664 * target.h (target_insert_breakpoint): Extend comment.
1665 (target_insert_hw_breakpoint): Add comment.
1667 2014-01-08 Pedro Alves <palves@redhat.com>
1669 * remote.c (remote_add_thread): Add threads silently if starting
1671 (remote_notice_new_inferior): If in all-stop, and starting up,
1672 don't call notice_new_inferior.
1673 (get_current_thread): New function, factored out from ...
1674 (add_current_inferior_and_thread): ... this. Adjust.
1675 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1676 found any thread, then select the remote's current thread as GDB's
1679 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1681 * NEWS: Create a new section for the next release branch.
1682 Rename the section of the current branch, now that it has
1685 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1687 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1688 * version.in: Bump version to 7.7.50.DATE-cvs.
1690 2014-01-08 Yao Qi <yao@codesourcery.com>
1692 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1693 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1694 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1696 2014-01-08 Yao Qi <yao@codesourcery.com>
1698 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1699 return value of bfd_get_filename to symbol_file_add_from_bfd.
1701 2014-01-08 Pierre Muller <muller@sourceware.org>
1704 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1705 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1706 to prim_record_mininal_symbol_and_info.
1707 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1708 in call to prim_record_minimal_symbol_and_info.
1709 (read_pe_exported_syms): Set index field of section_data.
1711 2014-01-07 Andrew Pinski <apinski@cavium.com>
1713 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1714 * features/aarch64.c: Regenerate.
1716 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1718 * target.c (return_null): Define.
1719 (update_current_target): Use it instead of return_zero for
1720 functions that return a pointer.
1722 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1724 * source.c (add_path): Fix check for duplicated paths in the previously
1727 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1729 * ada-lang.c: Remove duplicated include statements.
1730 * alphabsd-nat.c: Ditto.
1731 * amd64-darwin-tdep.c: Ditto.
1732 * amd64fbsd-nat.c: Ditto.
1733 * auto-load.c: Ditto.
1735 * breakpoint.c: Ditto.
1737 * fork-child.c: Ditto.
1738 * gdb_usleep.c: Ditto.
1739 * i386-darwin-tdep.c: Ditto.
1740 * i386fbsd-nat.c: Ditto.
1742 * inferior.c: Ditto.
1744 * linux-nat.c: Ditto.
1745 * linux-tdep.c: Ditto.
1746 * m68kbsd-nat.c: Ditto.
1747 * m68klinux-nat.c: Ditto.
1748 * microblaze-tdep.c: Ditto.
1749 * mips-linux-tdep.c: Ditto.
1750 * mn10300-tdep.c: Ditto.
1751 * nto-tdep.c: Ditto.
1752 * opencl-lang.c: Ditto.
1754 * printcmd.c: Ditto.
1755 * regcache.c: Ditto.
1756 * remote-m32r-sdi.c: Ditto.
1760 * tilegx-linux-nat.c: Ditto.
1761 * tilegx-tdep.c: Ditto.
1762 * tracepoint.c: Ditto.
1764 * vaxbsd-nat.c: Ditto.
1765 * windows-nat.c: Ditto.
1766 * xtensa-tdep.c: Ditto.
1768 2014-01-07 Yao Qi <yao@codesourcery.com>
1770 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1772 2014-01-07 Yao Qi <yao@codesourcery.com>
1773 Joel Brobecker <brobecker@adacore.com>
1775 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1776 (pdc_write_regs): Likewise.
1777 (fetch_regs_kernel_thread): Likewise.
1778 (store_regs_kernel_thread): Likewise.
1780 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1782 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1783 tagged type objects to their actual type.
1785 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1787 * ada-valprint.c (print_field_values): Add "language" parameter.
1788 Update calls to print_field_values and print_variant_part.
1789 Pass new parameter "language" in call to val_print instead
1790 of "current_language". Replace call to ada_val_print by call
1792 (print_variant_part): Add "language" parameter.
1793 (ada_val_print_struct_union): Update call to print_field_values.
1795 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1797 * ada-valprint.c (ui_memcpy): Delete.
1798 (ada_print_floating): Update documentation. Add empty line
1799 between between function documentation and implementation.
1800 Delete variable "buffer". Use ui_file_xstrdup in place of
1801 ui_file_put. Minor adjustments following this change.
1803 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1805 * ada-valprint.c (ada_val_print_string): New function,
1806 extracted from ada_val_print_array.
1807 (ada_val_print_array): Replace extracted code by call
1808 to ada_val_print_string followed by a return. Move
1809 "else" branch to the function's top block.
1811 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1813 * ada-valprint.c (ada_val_print_array): Move implementation
1814 down. Rename parameter "offset" and "val" into "offset_aligned"
1815 and "original_value" respectively. Add parameter "offset".
1817 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1819 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1820 re-organizing the code. Change the "???" message printed
1821 when target type is a TYPE_CODE_UNDEF into
1822 "<ref to undefined type>".
1824 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1826 * ada-valprint.c (print_record): Delete, implementation inlined...
1827 (ada_val_print_struct_union): ... here. Remove call to
1828 ada_check_typedef in inlined implementation.
1830 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1832 * ada-valprint.c (ada_val_print_gnat_array): New function,
1833 extracted from ada_val_print_1;
1834 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1835 (ada_val_print_flt, ada_val_print_struct_union)
1836 (ada_val_print_ref): Likewise.
1837 (ada_val_print_1): Delete variables i and elttype.
1838 Replace extracted-out code by call to corresponding
1841 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1843 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1845 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1847 * ada-valprint.c (ada_val_print_1): Replace calls to
1848 ada_val_print_1 by calls to val_print.
1850 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1852 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1853 Update calls to self accordingly. Replace calls to c_val_print
1854 by calls to val_print.
1856 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1858 * ada-valprint.c (print_record): Delete declaration.
1859 (adjust_type_signedness, ada_val_print_1): Likewise.
1860 (ada_val_print): Move function implementation down.
1861 (print_variant_part, print_field_values, print_record):
1862 Move function implementation up.
1864 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1866 * python/py-type.c (typy_get_name): New function.
1867 (type_object_getset): Add entry for attribute "name".
1868 * NEWS: Add entry mentioning this new attribute.
1870 2014-01-07 Yao Qi <yao@codesourcery.com>
1872 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1875 2014-01-07 Yao Qi <yao@codesourcery.com>
1877 * gnu-nat.c (info_port_rights): Add qualifier const to
1880 2014-01-07 Yao Qi <yao@codesourcery.com>
1882 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1884 2014-01-07 Yao Qi <yao@codesourcery.com>
1886 * gnu-nat.c (make_inf) Update declaration.
1887 (make_inf): Make it static.
1888 (inf_set_traced): Likewise.
1889 (inf_port_to_thread, inf_task_died_status): Likewise.
1891 2014-01-07 Yao Qi <yao@codesourcery.com>
1893 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1895 2014-01-07 Yao Qi <yao@codesourcery.com>
1897 * gnu-nat.c (_initialize_gnu_nat): Declare.
1899 2014-01-07 Yao Qi <yao@codesourcery.com>
1901 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1903 (struct gdbarch_info) <byte_order>: Change type to
1905 <byte_order_for_code>: Likewise.
1906 * gdbarch.c, gdbarch.h: Regenerated.
1908 2014-01-06 Sasha Smundak <asmundak@google.com>
1910 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1912 2014-01-06 Tom Tromey <tromey@redhat.com>
1914 * doublest.c (convert_doublest_to_floatformat): Use const, not
1916 * somread.c (som_symtab_read): Likewise.
1918 2014-01-07 Hui Zhu <hui@codesourcery.com>
1920 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1921 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1922 (gdb_bfd_fopen): Ditto.
1923 (gdb_bfd_openr): Ditto.
1924 (gdb_bfd_openw): Ditto.
1925 (gdb_bfd_openr_iovec): Ditto.
1926 (gdb_bfd_fdopenr): Ditto.
1927 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1928 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1930 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1932 * symfile-mem.c (symbol_file_add_from_memory): Removed
1933 gdb_bfd_stash_filename.
1935 2014-01-03 Doug Evans <dje@google.com>
1937 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1940 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1942 Update year range in copyright notice of all files.
1944 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1946 * top.c (print_gdb_version): Set copyright year to 2014.
1948 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1950 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1952 For older changes see ChangeLog-2013.
1958 version-control: never