gdb/ChangeLog

   1 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
   2
   3         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
   4         offset on little-endian when passing small structures.
   5
   6 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
   7
   8         * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
   9         (struct ppc64_sysv_argpos): New data structure.
  10         (ppc64_sysv_abi_push_float): Remove.
  11         (ppc64_sysv_abi_push_val): New function.
  12         (ppc64_sysv_abi_push_integer): Likewise.
  13         (ppc64_sysv_abi_push_freg): Likewise.
  14         (ppc64_sysv_abi_push_vreg): Likewise.
  15         (ppc64_sysv_abi_push_param): Likewise.
  16         (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
  17         (ppc64_sysv_abi_return_value_base): New function.
  18         (ppc64_sysv_abi_return_value): Refactor to use it.
  19
  20 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  21
  22         * NEWS: Document new target powerpc64le-*-linux*.
  23
  24 2014-02-04  Mark Kettenis  <kettenis@gnu.org>
  25
  26         * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
  27         (sparc64obsd_supply_gregset): Handle registers sets used in ELF
  28         core dumps.
  29         (sparc64obsd_init_abi): Adjust minimum size of the general purpose
  30         register set used in ELF core dumps.  Add floating-point register set.
  31
  32 2014-02-03  Kevin Buettner  <kevinb@redhat.com>
  33
  34         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
  35         dwarf2_to_gdb[] table using symbolic constants.  Adjust
  36         penultimate entry from number representing the PC register
  37         to symbolic constant representing the MDR register.  Add
  38         constant for the PC register to the end of the table.
  39
  40 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  41
  42         * bsd-kvm.c: Include <sys/param.h>
  43
  44 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  45
  46         * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
  47
  48 2014-01-31  Joel Brobecker  <brobecker@adacore.com>
  49
  50         * ada-lang.h (clear_ada_sym_cache): Delete.
  51
  52 2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>
  53
  54         * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
  55
  56 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
  57
  58         * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
  59           the sigreturn register save area only if the syscall is
  60           sigreturn.
  61
  62 2014-01-29  Joel Brobecker  <brobecker@adacore.com>
  63
  64         * valops.c (value_slice): Minor reformatting.
  65
  66 2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>
  67
  68         * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
  69
  70 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
  71
  72         * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
  73         New static globals.
  74         (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
  75         (ada_ignore_descriptive_types_p): New static global.
  76         (find_parallel_type_by_descriptive_type): Return immediately
  77         if ada_ignore_descriptive_types_p is set.
  78         (_initialize_ada_language): Register new commands "maintenance
  79         set ada", "maintenance show ada", "maintenance set ada
  80         ignore-descriptive-types" and "maintenance show ada
  81         ignore-descriptive-types".
  82         * NEWS: Add entry for new "maint ada set/show
  83         ignore-descriptive-types" commands.
  84
  85 2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>
  86
  87         * record-btrace.c (record_btrace_close): Call btrace_teardown
  88         for all threads.
  89
  90 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
  91
  92         * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
  93         "ui-out.h".
  94
  95 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
  96
  97         * ada-typeprint (type_is_full_subrange_of_target_type):
  98         New function.
  99         (print_range): Add parameter bounds_prefered_p.  If not set,
 100         try printing range types using the name of their base type.
 101         (print_range_type): Add parameter bounds_prefered_p.
 102         Use it in call to print_range.
 103         (print_array_type, ada_print_type): Update calls to print_range
 104         and print_range_type.
 105
 106 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 107
 108         * ada-typeprint.c (print_array_type, print_choices, print_range)
 109         (print_range_bound, print_dynamic_range_bound, print_range_type):
 110         Remove declaration.
 111
 112 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 113
 114         * ada-typeprint.c (print_range): Add missing empty line
 115         after local declaration.
 116
 117 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 118
 119         * ada-valprint.c (print_optional_low_bound): Get index_type's
 120         target type for as long as it is a TYPE_CODE_RANGE.
 121
 122 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 123
 124         * procfs.c (procfs_make_note_section): Remove assertion and
 125         associated comment.
 126
 127 2014-01-24  Yao Qi  <yao@codesourcery.com>
 128
 129         * remote.c (remote_read_bytes): Change type of len to ULONGEST.
 130         * corelow.c (get_core_siginfo): Likewise.
 131
 132 2014-01-24  Yao Qi  <yao@codesourcery.com>
 133
 134         * remote.c (remote_write_bytes_aux): Change type of 'len' to
 135         ULONGEST.  Don't check 'len' is negative.
 136         (remote_write_bytes):  Change type of 'len' to ULONGEST.
 137
 138 2014-01-23  Tom Tromey  <tromey@redhat.com>
 139
 140         PR python/16485:
 141         * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
 142         Handle exception from frame.block.
 143         (FrameVars.fetch_frame_locals): Likewise.
 144
 145 2014-01-23  Tom Tromey  <tromey@redhat.com>
 146
 147         PR python/16487:
 148         * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
 149         on a NULL pointer.  Move "goto error" to correct place.
 150
 151 2014-01-23  Tom Tromey  <tromey@redhat.com>
 152
 153         PR python/16491:
 154         * python/py-framefilter.c (apply_frame_filter): Call
 155         ensure_python_env after computing gdbarch.
 156
 157 2014-01-23  Yao Qi  <yao@codesourcery.com>
 158
 159         * target.c (raw_memory_xfer_partial): Change argument type
 160         from void * to gdb_byte *.
 161         (memory_xfer_partial_1, memory_xfer_partial): Likewise.
 162
 163 2014-01-22  Doug Evans  <dje@google.com>
 164
 165         New gdbserver option --debug-format=timestamp.
 166         * NEWS: Mention it.
 167
 168 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
 169
 170         * syscalls/s390x-linux.xml: New file.
 171         * syscalls/s390-linux.xml: New file.
 172         * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
 173         (XML_SYSCALL_FILENAME_S390X): Likewise.
 174         (op_svc): New enum value for SVC opcode.
 175         (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
 176         (s390_linux_get_syscall_number): New function.
 177         (s390_gdbarch_init): Register '*get_syscall_number' and the
 178         syscall xml file name.
 179         * data-directory/Makefile.in (SYSCALLS_FILES): Add
 180         "s390-linux.xml" and "s390x-linux.xml".
 181         * NEWS: Announce new feature.
 182
 183 2014-01-22  Baruch Siach  <baruch@tkos.co.il>
 184
 185         * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
 186
 187 2014-01-22  Pedro Alves  <palves@redhat.com>
 188
 189         * xtensa-config.c: Include defs.h.
 190
 191 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 192
 193         * common/common-utils.h: Add "ARI:" comment beside __func__
 194         reference.
 195
 196 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 197
 198         * common/common-utils.h (FUNCTION_NAME): Expand the macro's
 199         documentation a bit.
 200
 201 2014-01-21  Roland McGrath  <mcgrathr@google.com>
 202
 203         * configure.ac: Call AM_PROG_INSTALL_STRIP.
 204         * configure: Regenerate.
 205         * aclocal.m4: Regenerate.
 206         * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
 207         New substituted variables.
 208         (install-strip): New target.
 209         (INSTALL_SCRIPT): New substituted variable.
 210         (FLAGS_TO_PASS): Add it.
 211         (install-only): Use $(INSTALL_SCRIPT) rather than
 212         $(INSTALL_PROGRAM) for gcore.
 213
 214 2014-01-20  Tom Tromey  <tromey@redhat.com>
 215
 216         * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
 217         together.
 218
 219 2014-01-20  Tom Tromey  <tromey@redhat.com>
 220
 221         * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
 222         (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
 223         (deprecated_cmd_warning, complete_on_cmdlist): Update.
 224         * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
 225         (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
 226         (struct cmd_list_element) <flags>: Remove.
 227         <cmd_deprecated, deprecated_warn_user, malloced_replacement,
 228         doc_allocated>: New fields.
 229         <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
 230         bitfields.
 231         * maint.c (maintenance_do_deprecate): Update.
 232         * top.c (execute_command): Update.
 233
 234 2014-01-20  Baruch Siach  <baruch@tkos.co.il>
 235
 236         * xtensa-linux-nat.c: Include asm/ptrace.h.
 237
 238 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 239
 240         * Makefile.in (SFILES): Add d-support.c.
 241         (COMMON_OBS): Add d-support.o.
 242         * d-lang.h (d_parse_symbol): Add comment, now defined in
 243         d-support.c.
 244         * d-lang.c (parse_call_convention)
 245         (parse_attributes, parse_function_types)
 246         (parse_function_args, parse_type, parse_identifier)
 247         (call_convention_p, d_parse_symbol): Move functions to ...
 248         * d-support.c: ... New file.
 249
 250 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 251
 252         * d-lang.h (d_parse_symbol): Add declaration.
 253         * d-lang.c (extract_identifiers)
 254         (extract_type_info): Remove functions.
 255         (parse_call_convention, parse_attributes)
 256         (parse_function_types, parse_function_args)
 257         (parse_type, parse_identifier, call_convention_p)
 258         (d_parse_symbol): New functions.
 259         (d_demangle): Use d_parse_symbol to demangle D symbols.
 260
 261 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 262
 263         * d-lang.h (struct builtin_d_type): New data type.
 264         (builtin_d_type): Add declaration.
 265         * d-lang.c (d_language_arch_info, build_d_types)
 266         (builtin_d_type): New functions.
 267         (enum d_primitive_types): New data type.
 268         (d_language_defn): Change c_language_arch_info to
 269         d_language_arch_info.
 270         (d_type_data): New static variable.
 271         (_initialize_d_language): Initialize d_type_data.
 272
 273 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 274
 275         * d-lang.h (d_main_name): Add declaration.
 276         * d-lang.c (d_main_name): New function.
 277         * symtab.c (find_main_name): Add call to d_main_name.
 278
 279 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 280
 281         * d-lang.c (d_language_defn): Change macro_expansion_c to
 282         macro_expansion_no.
 283
 284 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 285
 286         * MAINTAINERS: Add myself as a write-after-approval maintainer.
 287
 288 2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>
 289
 290         * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
 291         gdb_exception" declaration.
 292         * remote.c (getpkt_or_notif_sane): Likewise.
 293
 294 2014-01-17  Doug Evans  <dje@google.com>
 295
 296         * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
 297         function, contents of dirnames_to_char_ptr_vec_append moved here.
 298         (delim_string_to_char_ptr_vec): New function.
 299         (dirnames_to_char_ptr_vec_append): Rewrite.
 300         * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
 301
 302 2014-01-17  Doug Evans  <dje@google.com>
 303
 304         * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
 305         and moved here ...
 306         * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
 307         #include "common-utils.h".
 308         (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
 309         * common/vec.h (VEC_ASSERT_PASS): Update.
 310         * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
 311         (MACH_CHECK_ERROR): Update.
 312
 313 2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>
 314
 315         * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
 316         comments.
 317         * gdbarch.h: Regenerate.
 318
 319 2014-01-16  Tom Tromey  <tromey@redhat.com>
 320
 321         * value.c (struct value) <regnum>: Move earlier.
 322
 323 2014-01-16  Tom Tromey  <tromey@redhat.com>
 324
 325         * remote.c (extended_remote_create_inferior): Rename from
 326         extended_remote_create_inferior_1.  Add "ops" argument.  Remove
 327         old implementation.
 328
 329 2014-01-16  Pedro Alves  <palves@redhat.com>
 330
 331         * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
 332         NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
 333         the backchain.
 334
 335 2014-01-16  Doug Evans  <dje@google.com>
 336
 337         * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
 338
 339 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 340
 341         * btrace.h (btrace_thread_flag): New.
 342         (struct btrace_thread_info) <flags>: New.
 343         * record-btrace.c (record_btrace_resume_thread)
 344         (record_btrace_find_thread_to_move, btrace_step_no_history)
 345         (btrace_step_stopped, record_btrace_start_replaying)
 346         (record_btrace_step_thread, record_btrace_decr_pc_after_break)
 347         (record_btrace_find_resume_thread): New.
 348         (record_btrace_resume, record_btrace_wait): Extend.
 349         (record_btrace_can_execute_reverse): New.
 350         (record_btrace_open): Fail in non-stop mode.
 351         (record_btrace_set_replay): Split into this, ...
 352         (record_btrace_stop_replaying): ... this, ...
 353         (record_btrace_clear_histories): ... and this.
 354         (init_record_btrace_ops): Init to_can_execute_reverse.
 355         * NEWS: Announce it.
 356
 357 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 358
 359         * target.h (struct target_ops) <to_decr_pc_after_break>: New.
 360         (forward_target_decr_pc_after_break)
 361         (target_decr_pc_after_break): New.
 362         * target.c (forward_target_decr_pc_after_break)
 363         (target_decr_pc_after_break): New.
 364         * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
 365         instead of gdbarch_decr_pc_after_break.
 366         * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 367         instead of gdbarch_decr_pc_after_break.
 368         * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
 369         instead of gdbarch_decr_pc_after_break.
 370         * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 371         instead of gdbarch_decr_pc_after_break.
 372         * linux-thread-db.c (check_event): Call target_decr_pc_after_break
 373         instead of gdbarch_decr_pc_after_break.
 374         * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
 375         instead of gdbarch_decr_pc_after_break.
 376
 377 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 378
 379         * btrace.c: Include regcache.h.
 380         (btrace_add_pc): New.
 381         (btrace_enable): Call btrace_add_pc.
 382         (btrace_is_empty): New.
 383         * btrace.h (btrace_is_empty): New.
 384         * record-btrace.c (require_btrace, record_btrace_info): Call
 385         btrace_is_empty.
 386
 387 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 388
 389         * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
 390         Support delta reads.
 391         (linux_disable_btrace): Change return type.
 392         * common/linux-btrace.h (linux_read_btrace): Change parameters
 393         and return type to allow error reporting.  Update users.
 394         (linux_disable_btrace): Change return type.  Update users.
 395         * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
 396         New.
 397         (btrace_error): New.
 398         (btrace_block) <begin>: Comment on BEGIN == 0.
 399         * btrace.c (btrace_compute_ftrace): Start from the end of
 400         the current trace.
 401         (btrace_stitch_trace, btrace_clear_history): New.
 402         (btrace_fetch): Read delta trace, return if replaying.
 403         (btrace_clear): Move clear history code to btrace_clear_history.
 404         (parse_xml_btrace): Throw an error if parsing failed.
 405         * target.h (struct target_ops) <to_read_btrace>: Change parameters
 406         and return type to allow error reporting.
 407         (target_read_btrace): Change parameters and return type to allow
 408         error reporting.
 409         * target.c (target_read_btrace): Update.
 410         * remote.c (remote_read_btrace): Support delta reads.  Pass
 411         errors on.
 412         * NEWS: Announce it.
 413
 414 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 415
 416         * record.h (record_btrace_frame_unwind)
 417         (record_btrace_tailcall_frame_unwind): New declarations.
 418         * dwarf2-frame: Include record.h
 419         (dwarf2_frame_cfa): Throw an error for btrace frames.
 420         * record-btrace.c: Include hashtab.h.
 421         (btrace_get_bfun_name): New.
 422         (btrace_call_history): Call btrace_get_bfun_name.
 423         (struct btrace_frame_cache): New.
 424         (bfcache): New.
 425         (bfcache_hash, bfcache_eq, bfcache_new): New.
 426         (btrace_get_frame_function): New.
 427         (record_btrace_frame_unwind_stop_reason): Allow unwinding.
 428         (record_btrace_frame_this_id): Compute own id.
 429         (record_btrace_frame_prev_register): Provide PC, throw_error
 430         for all other registers.
 431         (record_btrace_frame_sniffer): Detect btrace frames.
 432         (record_btrace_tailcall_frame_sniffer): New.
 433         (record_btrace_frame_dealloc_cache): New.
 434         (record_btrace_frame_unwind): Add new functions.
 435         (record_btrace_tailcall_frame_unwind): New.
 436         (_initialize_record_btrace): Allocate cache.
 437         * btrace.c (btrace_clear): Call reinit_frame_cache.
 438         * NEWS: Announce it.
 439
 440 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 441
 442         * record-btrace.c (record_btrace_set_replay)
 443         (record_btrace_goto_begin, record_btrace_goto_end)
 444         (record_btrace_goto): New.
 445         (init_record_btrace_ops): Initialize them.
 446         * NEWS: Announce it.
 447
 448 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 449
 450         * record-btrace.c (record_btrace_find_new_threads)
 451         (record_btrace_thread_alive): New.
 452         (init_record_btrace_ops): Initialize to_find_new_threads and
 453         to_thread_alive.
 454
 455 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 456
 457         * record-btrace.c (record_btrace_resume): New.
 458         (record_btrace_wait): New.
 459         (init_record_btrace_ops): Initialize to_wait and to_resume.
 460
 461 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 462
 463         * record-btrace.c (record_btrace_xfer_partial)
 464         (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
 465         (record_btrace_allow_memory_access): New.
 466         (init_record_btrace_ops): Initialize new methods.
 467         * target.c (raw_memory_xfer_partial): Bail out if target reports
 468         that this memory is not available.
 469
 470 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 471
 472         * target.h (target_ops) <to_insert_breakpoint>
 473         <to_remove_breakpoint>: Add target_ops parameter.
 474         (forward_target_insert_breakpoint): New.
 475         (forward_target_remove_breakpoint): New.
 476         (memory_remove_breakpoint, memory_insert_breakpoint):
 477         Add target_ops parameter.
 478         * target.c (target_insert_breakpoint): Split into this and ...
 479         (forward_target_insert_breakpoint): ... this.
 480         (target_remove_breakpoint): Split into this and ...
 481         (forward_target_remove_breakpoint): ... this.
 482         (debug_to_insert_breakpoint): Add target_ops parameter.
 483         Call forward_target_insert_breakpoint.
 484         (debug_to_remove_breakpoint): Add target_ops parameter.
 485         Call forward_target_remove_breakpoint.
 486         (update_current_target): Do not inherit or default to_insert_breakpoint
 487         and to_remove_breakpoint.
 488         * corelow.c (ignore): Add target_ops parameter.
 489         * exec.c (ignore): Add target_ops parameter.
 490         * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
 491         Add target_ops parameter.
 492         * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
 493         Add target_ops parameter.
 494         * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
 495         Add target_ops parameter.
 496         * record-full.c (record_full_beneath_to_insert_breakpoint)
 497         (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
 498         (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
 499         (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
 500         (record_full_core_remove_breakpoint): Add target_ops parameter.
 501         Update users.
 502         (record_full_beneath_to_insert_breakpoint_ops)
 503         (record_full_beneath_to_remove_breakpoint_ops)
 504         (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
 505         (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
 506         tmp_to_remove_breakpoint_ops,
 507         record_full_beneath_to_insert_breakpoint_ops, and
 508         record_full_beneath_to_remove_breakpoint_ops.
 509         * remote-m32r-sdi.c (m32r_insert_breakpoint)
 510         (m32r_remove_breakpoint): Add target_ops parameter.
 511         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
 512         Add target_ops parameter.
 513         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
 514         Add target_ops parameter.
 515
 516 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 517             Markus Metzger  <markus.t.metzger@intel.com>
 518
 519         * record-btrace.c: Include frame-unwind.h.
 520         (record_btrace_frame_unwind_stop_reason)
 521         (record_btrace_frame_this_id, record_btrace_frame_prev_register)
 522         (record_btrace_frame_sniffer, record_btrace_frame_unwind):
 523         New.
 524         (init_record_btrace_ops): Install it.
 525
 526 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 527
 528         * frame.c (get_frame_unwind_stop_reason): Unconditionally call
 529         get_prev_frame_1.
 530
 531 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 532
 533         * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
 534         earlier.
 535
 536 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 537
 538         * frame-unwind.c: Include target.h.
 539         (frame_unwind_try_unwinder): New function with code from ...
 540         (frame_unwind_find_by_frame): ... here.  New variable
 541         unwinder_from_target, call also target_get_unwinder)
 542         (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
 543         * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
 544         * target.h (struct target_ops): New fields to_get_unwinder and
 545         to_get_tailcall_unwinder.
 546         (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
 547
 548 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 549
 550         * record-btrace.c (record_btrace_fetch_registers)
 551         (record_btrace_store_registers)
 552         (record_btrace_to_prepare_to_store): New.
 553         (init_record_btrace_ops): Add the above.
 554
 555 2014-01-16  Tom Tromey  <tromey@redhat.com>
 556
 557         * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
 558         * target.h (struct target_ops) <to_prepare_to_store>: Add
 559         argument.
 560         (target_prepare_to_store): Add argument.
 561         * target.c (debug_to_prepare_to_store): Add argument.
 562         (update_current_target): Update.
 563         * remote.c (remote_prepare_to_store): Add 'self' argument.
 564         * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
 565         * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
 566         * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
 567         * record-full.c (record_full_core_prepare_to_store): Add 'self'
 568         argument.
 569         * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
 570         * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
 571         * monitor.c (monitor_prepare_to_store): Add 'self' argument.
 572         * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
 573         * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
 574
 575 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 576
 577         * btrace.h (replay) <replay>: New.
 578         (btrace_is_replaying): New.
 579         * btrace.c (btrace_clear): Free replay iterator.
 580         (btrace_is_replaying): New.
 581         * record-btrace.c (record_btrace_is_replaying): New.
 582         (record_btrace_info): Print insn number if replaying.
 583         (record_btrace_insn_history): Start at replay position.
 584         (record_btrace_call_history): Start at replay position.
 585         (init_record_btrace_ops): Init to_record_is_replaying.
 586
 587 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 588
 589         * record-btrace.c (record_btrace_insn_history_range): Include
 590         end.
 591         (record_btrace_insn_history_from): Adjust range.
 592         (record_btrace_call_history_range): Include
 593         end.
 594         (record_btrace_call_history_from): Adjust range.
 595         * NEWS: Announce changes.
 596
 597 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 598
 599         * record.h (enum record_print_flag)
 600         <record_print_indent_calls>: New.
 601         * record.c (get_call_history_modifiers): Recognize /c modifier.
 602         (_initialize_record): Document /c modifier.
 603         * record-btrace.c (btrace_call_history): Add btinfo parameter.
 604         Reorder fields.  Optionally indent the function name.  Update
 605         all users.
 606         * NEWS: Announce changes.
 607
 608 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 609
 610         * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
 611
 612 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 613
 614         * btrace.c (ftrace_new_function): Start counting at one.
 615         * record-btrace.c (record_btrace_info): Adjust number of calls
 616         and insns.
 617         * NEWS: Announce it.
 618
 619 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 620
 621         * record-btrace.c (btrace_call_history_insn_range): Print
 622         insn range as [begin, end].
 623
 624 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 625
 626         * btrace.h (struct btrace_func_link): New.
 627         (enum btrace_function_flag): New.
 628         (struct btrace_inst): Rename to ...
 629         (struct btrace_insn): ...this. Update all users.
 630         (struct btrace_func) <ibegin, iend>: Remove.
 631         (struct btrace_func_link): New.
 632         (struct btrace_func): Rename to ...
 633         (struct btrace_function): ...this. Update all users.
 634         (struct btrace_function) <segment, flow, up, insn, insn_offset)
 635         (number, level, flags>: New.
 636         (struct btrace_insn_iterator): Rename to ...
 637         (struct btrace_insn_history): ...this.
 638         Update all users.
 639         (struct btrace_insn_iterator, btrace_call_iterator): New.
 640         (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
 641         (struct btrace_target_info) <begin, end, level>
 642         <insn_history, call_history>: New.
 643         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 644         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 645         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 646         (btrace_call_number, btrace_call_begin, btrace_call_end)
 647         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 648         (btrace_find_function_by_number, btrace_set_insn_history)
 649         (btrace_set_call_history): New.
 650         * btrace.c (btrace_init_insn_iterator)
 651         (btrace_init_func_iterator, compute_itrace): Remove.
 652         (ftrace_print_function_name, ftrace_print_filename)
 653         (ftrace_skip_file): Change
 654         parameter to const.
 655         (ftrace_init_func): Remove.
 656         (ftrace_debug): Use new btrace_function fields.
 657         (ftrace_function_switched): Also consider gaining and
 658         losing symbol information).
 659         (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
 660         (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
 661         (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
 662         New.
 663         (ftrace_new_function): Move. Remove debug print.
 664         (ftrace_update_lines, ftrace_update_insns): New.
 665         (ftrace_update_function): Check for call, ret, and jump.
 666         (compute_ftrace): Renamed to ...
 667         (btrace_compute_ftrace): ...this. Rewritten to compute call
 668         stack.
 669         (btrace_fetch, btrace_clear): Updated.
 670         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 671         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 672         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 673         (btrace_call_number, btrace_call_begin, btrace_call_end)
 674         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 675         (btrace_find_function_by_number, btrace_set_insn_history)
 676         (btrace_set_call_history): New.
 677         * record-btrace.c (require_btrace): Use new btrace thread
 678         info fields.
 679         (record_btrace_info, btrace_insn_history)
 680         (record_btrace_insn_history, record_btrace_insn_history_range):
 681         Use new btrace thread info fields and new iterator.
 682         (btrace_func_history_src_line): Rename to ...
 683         (btrace_call_history_src_line): ...this. Use new btrace
 684         thread info fields.
 685         (btrace_func_history): Rename to ...
 686         (btrace_call_history): ...this. Use new btrace thread info
 687         fields and new iterator.
 688         (record_btrace_call_history, record_btrace_call_history_range):
 689         Use new btrace thread info fields and new iterator.
 690
 691 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 692
 693         * frame.h (frame_id_build_unavailable_stack_special): New.
 694         * frame.c (frame_id_build_unavailable_stack_special): New.
 695
 696 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 697
 698         * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
 699         (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
 700         (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
 701         to gdbarch.
 702         * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
 703         (i386_insn_is_jump, i386_jmp_p): New.
 704         (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
 705         insn_is_jump to gdbarch.
 706         * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
 707         * gdbarch.h: Regenerated.
 708         * gdbarch.c: Regenerated.
 709         * arch-utils.h (default_insn_is_call, default_insn_is_ret)
 710         (default_insn_is_jump): New.
 711         * arch-utils.c (default_insn_is_call, default_insn_is_ret)
 712         (default_insn_is_jump): New.
 713
 714 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 715
 716         * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
 717         Change to ...
 718         (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
 719         (btrace_read_type) <btrace_read_new>: Change to ...
 720         (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.
 721
 722 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 723
 724         * common/linux-btrace.c (linux_read_btrace): Free trace from
 725         previous iteration.
 726
 727 2014-01-15  Doug Evans  <dje@google.com>
 728
 729         * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
 730         uint32_t.
 731
 732 2014-01-15  Tom Tromey  <tromey@redhat.com>
 733
 734         * dbxread.c (process_one_symbol): Use set_objfile_main_name.
 735         * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
 736         * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
 737         (set_objfile_main_name): New function.
 738         * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
 739         language_of_main>: New fields.
 740         (set_objfile_main_name): Declare.
 741         * symtab.c (find_main_name): Loop over objfiles to find the main
 742         name and language.
 743         (set_main_name): Now static.
 744         (get_main_info): Add comment.
 745         * symtab.h (set_main_name): Don't declare.
 746
 747 2014-01-15  Tom Tromey  <tromey@redhat.com>
 748
 749         * symtab.c (main_progspace_key): New global.
 750         (struct main_info): New.
 751         (name_of_main, language_of_main): Remove.
 752         (get_main_info, main_info_cleanup): New function.
 753         (set_main_name, main_name, main_language): Use get_main_info.
 754         (_initialize_symtab): Initialize main_progspace_key.
 755
 756 2014-01-15  Tom Tromey  <tromey@redhat.com>
 757
 758         * dbxread.c (process_one_symbol): Update.
 759         * dwarf2read.c (read_partial_die): Update.
 760         * symfile.c (set_initial_language): Call main_language.
 761         * symtab.c (language_of_main): Now static.
 762         (set_main_name): Add 'lang' parameter.
 763         (find_main_name): Update.
 764         (main_language): New function.
 765         (symtab_observer_executable_changed): Update.
 766         * symtab.h (set_main_name): Update.
 767         (language_of_main): Remove.
 768         (main_language): Declare.
 769
 770 2014-01-15  Tom Tromey  <tromey@redhat.com>
 771
 772         * symfile.c (init_entry_point_info): Use new "initialized" field.
 773         Update.
 774         * objfiles.h (struct entry_point) <initialized>: New field.
 775         (struct objfile_per_bfd_storage) <ei>: New field, moved from...
 776         (struct objfile) <ei>: ...here.  Remove.
 777         * objfiles.c (entry_point_address_query): Update.
 778
 779 2014-01-15  Tom Tromey  <tromey@redhat.com>
 780
 781         * objfiles.c (entry_point_address_query): Relocate entry point
 782         address.
 783         (objfile_relocate1): Do not relocate entry point address.
 784         * objfiles.h (struct entry_info) <entry_point>: Update comment.
 785         <the_bfd_section_index>: New field.
 786         * symfile.c (init_entry_point_info): Find the entry point's
 787         section.
 788
 789 2014-01-15  Tom Tromey  <tromey@redhat.com>
 790
 791         * solib-frv.c (enable_break): Use entry_point_address_query.
 792
 793 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 794
 795         * NEWS: Add note on improved process record-replay on
 796         arm*-linux* targets.
 797
 798 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 799
 800         * arm-tdep.c (enum arm_record_result): New enum.
 801         (arm_record_unsupported_insn): New function.
 802         (arm_record_coproc_data_proc): Removed.
 803         (thumb2_record_ld_st_multiple): New function.
 804         (thumb2_record_ld_st_dual_ex_tbb): New function.
 805         (thumb2_record_data_proc_sreg_mimm): New function.
 806         (thumb2_record_ps_dest_generic): New function.
 807         (thumb2_record_branch_misc_cntrl): New function.
 808         (thumb2_record_str_single_data): New function.
 809         (thumb2_record_ld_mem_hints): New function.
 810         (thumb2_record_ld_word): New function.
 811         (thumb2_record_lmul_lmla_div): New function.
 812         (thumb2_record_decode_insn_handler): New function.
 813         (decode_insn): Add thumb32 instruction handlers.
 814
 815 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 816
 817         * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
 818         (struct arm_linux_record_tdep): Declare.
 819         (arm_canonicalize_syscall): New function.
 820         (arm_all_but_pc_registers_record): New function.
 821         (arm_linux_syscall_record): New function.
 822         (arm_linux_init_abi): Add syscall recording constructs.
 823         * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
 824         decoding.  (arm_record_coproc_data_proc): Update arm syscall
 825         decoding.
 826         * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
 827         <arm_syscall_record>: New field.
 828         * configure.tgt (arm*-*-linux*): Add linux-record.o to
 829         gdb_target_obs.
 830
 831 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 832
 833         * arm-tdep.c (thumb_record_misc): Update to use sp as base
 834         register for push instruction recording.
 835
 836 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 837
 838         * arm-tdep.c (thumb_record_misc): Update to correct logical
 839         error while recording ldm, ldmia and pop instructions.
 840
 841 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 842
 843         * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
 844
 845 2014-01-15  Pedro Alves  <palves@redhat.com>
 846
 847         * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
 848         (go32_resume, go32_fetch_registers, store_register)
 849         (go32_store_registers, go32_prepare_to_store)
 850         (go32_xfer_memory, go32_files_info, go32_kill_inferior)
 851         (go32_create_inferior, go32_can_run, go32_terminal_init)
 852         (go32_terminal_inferior, go32_terminal_ours): Delete forward
 853         declarations.
 854
 855 2014-01-15  Tom Tromey  <tromey@redhat.com>
 856
 857         * target.h (async_callback_ftype): New typedef.
 858         (struct target_ops) <to_async>: Use it.
 859
 860 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 861
 862         * python/py-value.c (get_field_type): Remove unnecessary curly
 863         braces for single-statement if block.
 864
 865 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 866
 867         * python/py-type.c (convert_field): Add missing empty line
 868         after declarations.
 869
 870 2014-01-14  Doug Evans  <dje@google.com>
 871
 872         * symfile.h (expand_symtabs_matching): Renamed from
 873         expand_partial_symbol_names.  Update prototype.
 874         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 875         * symfile.c (expand_symtabs_matching): Renamed from
 876         expand_partial_symbol_names.  New args file_matcher, kind.
 877         Rename arg fun to symbol_matcher.
 878         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 879         * ada-lang.c (ada_complete_symbol_matcher): Renamed from
 880         ada_expand_partial_symbol_name.
 881         (ada_make_symbol_completion_list): Update to call
 882         expand_symtabs_matching.
 883         (ada_add_global_exceptions): Call expand_symtabs_matching.
 884         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
 885         call map_symbol_filenames.
 886         * symtab.c (sources_info): Update to call map_symbol_filenames.
 887         (search_symbols): Call expand_symtabs_matching.
 888         (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
 889         (default_make_symbol_completion_list_break_on): Update to call
 890         expand_symtabs_matching.
 891         (make_source_files_completion_list): Update to call
 892         map_symbol_filenames.
 893
 894 2014-01-14  Doug Evans  <dje@google.com>
 895
 896         * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
 897         (expand_symtabs_symbol_matcher_ftype): New typedef.
 898         (quick_symbol_functions.expand_symtabs_matching): Update to use.
 899         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 900         * symfile.c (expand_partial_symbol_names): Update to use
 901         expand_symtabs_symbol_matcher_ftype.
 902         * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
 903         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 904         Arg name_matcher renamed to symbol_matcher.
 905         * psymtab.c (recursively_search_psymtabs): Update to use
 906         expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
 907         sym_matcher.
 908         (expand_symtabs_matching_via_partial): Update to use
 909         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 910         Arg name_matcher renamed to symbol_matcher.
 911
 912 2014-01-14  Doug Evans  <dje@google.com>
 913
 914         * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
 915         (map_partial_symbol_filenames): Ditto.
 916         * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
 917         (map_partial_symbol_filenames): Ditto.
 918         * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
 919         (map_partial_symbol_filenames): Ditto.
 920         * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
 921         (map_partial_symbol_filenames): Ditto.
 922         * symtab.c: Delete #include "psymtab.h".
 923
 924 2014-01-14  Pedro Alves  <palves@redhat.com>
 925             Tom Tromey  <tromey@redhat.com>
 926
 927         * infrun.c (use_displaced_stepping): Use find_record_target
 928         instead of RECORD_IS_USED.
 929         (adjust_pc_after_break): Use record_full_is_used instead of
 930         RECORD_IS_USED.
 931         * record-btrace.c (record_btrace_open): Call record_preopen
 932         instead of checking RECORD_IS_USED.
 933         * record-full.c (record_full_shortname)
 934         (record_full_core_shortname): New globals.
 935         (record_full_is_used): New function.
 936         (find_full_open): Call record_preopen instead of checking
 937         RECORD_IS_USED.
 938         (init_record_full_ops): Set the target's shortname to
 939         record_full_shortname.
 940         (init_record_full_core_ops): Set the target's shortname to
 941         record_full_core_shortname.
 942         * record-full.h (record_full_is_used): Declare.
 943         * record.c (find_record_target): Make extern.
 944         (record_preopen): New function.
 945         * record.h (RECORD_IS_USED): Delete macro.
 946         (find_record_target, record_preopen): Declare functions.
 947
 948 2014-01-14  Yao Qi  <yao@codesourcery.com>
 949
 950         * gdbarch.sh (core_xfer_shared_libraries): Change its argument
 951         'len''s type to ULONGEST.
 952         (core_xfer_shared_libraries_aix): Likewise.
 953         * gdbarch.c, gdbarch.h: Regenerated.
 954         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
 955         Change type of 'len' to ULONGEST.
 956         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
 957         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
 958
 959 2014-01-14  Yao Qi  <yao@codesourcery.com>
 960
 961         * common/linux-osdata.c (linux_xfer_osdata_processes): Change
 962         type of 'len' to ULONGEST.
 963         (linux_xfer_osdata_processgroups): Likewise.
 964         (linux_xfer_osdata_threads): Likewise.
 965         (linux_xfer_osdata_fds): Likewise.
 966         (linux_xfer_osdata_isockets): Likewise.
 967         (linux_xfer_osdata_shm): Likewise.
 968         (linux_xfer_osdata_sem): Likewise.
 969         (linux_xfer_osdata_msg): Likewise.
 970         (linux_common_xfer_osdata): Likewise.
 971         (struct osdata_type) <getter>: Likewise.
 972         * common/linux-osdata.h (linux_common_xfer_osdata): Update
 973         the declaration.
 974
 975 2014-01-14  Yao Qi  <yao@codesourcery.com>
 976
 977         * target.h (target_xfer_partial_ftype): Update.
 978         (struct target_ops) <to_xfer_partial>: Change 'len' type to
 979         ULONGEST.
 980         * aix-thread.c (aix_thread_xfer_partial): Change type of
 981         argument 'len' to ULONGEST.
 982         * auxv.c (procfs_xfer_auxv): Likewise.
 983         (ld_so_xfer_auxv): Likewise.
 984         (memory_xfer_auxv): Likewise.
 985         * bfd-target.c (target_bfd_xfer_partial): Likewise.
 986         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
 987         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
 988         * corelow.c (core_xfer_partial): Likewise.
 989         * ctf.c (ctf_xfer_partial): Likewise.
 990         * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
 991         '%u'.
 992         (darwin_read_dyld_info): Likewise.
 993         (darwin_xfer_partial): Likewise.
 994         * exec.c (section_table_xfer_memory_partial): Likewise.
 995         (exec_xfer_partial): Likewise.
 996         * exec.h (section_table_xfer_memory_partial): Update
 997         declaration.
 998         * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
 999         instead of plongest.
1000         (gnu_xfer_partial): Likewise.
1001         * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1002         (ia64_hpux_xfer_solib_got): Likewise.
1003         (ia64_hpux_xfer_partial): Likewise.
1004         * ia64-linux-nat.c (ia64_linux_xfer_partial):
1005         * inf-ptrace.c (inf_ptrace_xfer_partial):
1006         * inf-ttrace.c (inf_ttrace_xfer_partial):
1007         * linux-nat.c (linux_xfer_siginfo): Likewise.
1008         (linux_nat_xfer_partial): Likewise.
1009         (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1010         (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1011         * monitor.c (monitor_xfer_memory): Likewise.
1012         (monitor_xfer_partial): Likewise.
1013         * procfs.c (procfs_xfer_partial): Likewise.
1014         * record-full.c (record_full_xfer_partial): Likewise.
1015         (record_full_core_xfer_partial): Likewise.
1016         * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
1017         instead of plongest.
1018         (gdbsim_xfer_partial): Likewise.
1019         * remote.c (remote_xfer_partial): Likewise.
1020         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1021         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1022         declaration.
1023         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1024         (rs6000_xfer_shared_libraries): Likewise.
1025         * sol-thread.c (sol_thread_xfer_partial): Likewise.
1026         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1027         (sparc_xfer_partial): Likewise.
1028         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1029         (spu_xfer_partial): Likewise.
1030         * spu-multiarch.c (spu_xfer_partial): Likewise.
1031         * target.c (target_read_live_memory): Likewise.
1032         (memory_xfer_live_readonly_partial): Likewise.
1033         (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1034         (target_xfer_partial, default_xfer_partial): Likewise.
1035         (current_xfer_partial): Likewise.
1036         * tracepoint.c (tfile_xfer_partial): Likewise.
1037         * windows-nat.c (windows_xfer_memory): Likewise.  Call
1038         pulongest instead of plongest.
1039         (windows_xfer_partial): Likewise.
1040         (windows_xfer_shared_libraries): Likewise.
1041
1042 2014-01-14  Yao Qi  <yao@codesourcery.com>
1043
1044         * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1045         target_xfer_partial_ftype.
1046
1047 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
1048
1049         PR python/15464
1050         PR python/16113
1051         * valops.c (value_struct_elt_bitpos): New function
1052         * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1053         object to 'None' if the field name is an empty string ("").
1054         * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1055         attribute to look for a field when 'name' is 'None'.
1056         (get_field_type): New function
1057
1058 2014-01-13  Doug Evans  <dje@google.com>
1059
1060         PR symtab/16426
1061         * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1062         (try_open_dwop_file): Ditto.
1063         * gdb_bfd.c: #include "vec.h".
1064         (bfdp): New typedef.
1065         (struct gdb_bfd_data): New member included_bfds.
1066         (gdb_bfd_unref): Unref all included bfds.
1067         (gdb_bfd_record_inclusion): New function.
1068         * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1069
1070 2014-01-13  Tom Tromey  <tromey@redhat.com>
1071
1072         * gdbcore.h (deprecated_core_resize_section_table): Remove.
1073
1074 2014-01-13  Tom Tromey  <tromey@redhat.com>
1075
1076         * defs.h (use_windows): Remove.
1077         * gdb.c (main): Update.
1078         * main.c (captured_main, gdb_main): Update.
1079         * main.h (struct captured_main_args) <use_windows>: Remove.
1080         * top.c (use_windows): Remove.
1081
1082 2014-01-13  Tom Tromey  <tromey@redhat.com>
1083
1084         * defs.h (deprecated_flush_hook): Remove.
1085
1086 2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1087
1088         PR threads/16216
1089         * linux-thread-db.c (try_thread_db_load): Add parameter
1090         check_auto_load_safe.  Move here the file_is_auto_load_safe call.
1091         (try_thread_db_load_from_pdir_1): Move it there from here.
1092         (try_thread_db_load_from_sdir): Update caller.
1093         (try_thread_db_load_from_dir): Move it there from here.
1094
1095 2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>
1096
1097         * regformats/regdat.sh: Always rewrite the register file.
1098
1099 2014-01-13  Pedro Alves  <palves@redhat.com>
1100
1101         * Makefile.in (CHECK_HEADERS): New variable.
1102         (check-headers:): New rule.
1103
1104 2014-01-13  Tom Tromey  <tromey@redhat.com>
1105
1106         * cli/cli-setshow.c (do_set_command): Update.
1107         * defs.h (deprecated_set_hook): Remove.
1108         * top.c (deprecated_set_hook): Remove.
1109
1110 2014-01-13  Pedro Alves  <palves@redhat.com>
1111
1112         * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1113         the tracepoint if the PC is a pseudo-register.
1114
1115 2014-01-13  Tom Tromey  <tromey@redhat.com>
1116
1117         * defs.h (XCALLOC): Remove.
1118         * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1119         (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1120         * dwarf2loc.c (allocate_piece_closure): Likewise.
1121         * elfread.c (elf_symfile_segments): Likewise.
1122         (elf_symfile_segments): Likewise.
1123         * gdbtypes.c (copy_type_recursive): Likewise.
1124         * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1125         * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1126         * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1127         XCALLOC.
1128         * mt-tdep.c (mt_gdbarch_init): Likewise.
1129         * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1130         XCALLOC.
1131         * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1132         * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1133         * registry.c (registry_alloc_data): Likewise.
1134         * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1135         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1136         * serial.c (serial_fdopen_ops): Likewise.
1137         * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1138         XCALLOC.
1139         * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1140         * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1141         not XCALLOC.
1142
1143 2014-01-13  Tom Tromey  <tromey@redhat.com>
1144
1145         * defs.h (XMALLOC): Remove.
1146         * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1147         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1148         * cli-out.c (struct ui_out *): Likewise.
1149         * cli/cli-dump.c (add_dump_command): Likewise.
1150         (add_dump_command): Likewise.
1151         * complaints.c (get_complaints): Likewise.
1152         (find_complaint): Likewise.
1153         * dwarf2-frame.c (execute_cfa_program): Likewise.
1154         * dwarf2read.c (abbrev_table_read_table): Likewise.
1155         * gdbarch.sh: Likewise.
1156         * gdbarch.c: Rebuild.
1157         * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1158         * interps.c (interp_new): Likewise.
1159         * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1160         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1161         * mi/mi-console.c (mi_console_file_new): Likewise.
1162         * mi/mi-interp.c (mi_interpreter_init): Likewise.
1163         * mi/mi-out.c (mi_out_new): Likewise.
1164         * mi/mi-parse.c (mi_parse): Likewise.
1165         * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1166         * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1167         * observer.c (xalloc_observer_list_node): Likewise.
1168         * regcache.c (regcache_xmalloc_1): Likewise.
1169         * reggroups.c (reggroup_new): Likewise.
1170         (_initialize_reggroup): Likewise.
1171         * registry.c (register_data_with_cleanup): Likewise.
1172         * remote.c (remote_notif_stop_alloc_reply): Likewise.
1173         * ser-base.c (serial_ttystate): Likewise.
1174         * ser-mingw.c (make_pipe_state): Likewise.
1175         * ser-pipe.c (pipe_open): Likewise.
1176         * serial.c (serial_open): Likewise.
1177         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1178         * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1179         (tui_alloc_win_info): Likewise.
1180         (tui_add_content_elements): Likewise.
1181         * tui/tui-file.c (tui_file_new): Likewise.
1182         * tui/tui-out.c (tui_out_new): Likewise.
1183         * ui-file.c (mem_file_new): Likewise.
1184         * ui-out.c (push_level): Likewise.
1185         (make_cleanup_ui_out_end): Likewise.
1186         (append_header_to_list): Likewise.
1187         (ui_out_new): Likewise.
1188         * user-regs.c (user_reg_add_builtin): Likewise.
1189
1190 2014-01-13  Tom Tromey  <tromey@redhat.com>
1191
1192         * defs.h (XZALLOC): Remove.
1193         * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1194         * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1195         (get_ada_tasks_inferior_data): Likewise.
1196         * auto-load.c (get_auto_load_pspace_data): Likewise.
1197         * auxv.c (get_auxv_inferior_data): Likewise.
1198         * bfd-target.c (target_bfd_reopen): Likewise.
1199         * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1200         (deprecated_insert_raw_breakpoint): Likewise.
1201         * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1202         * corelow.c (core_open): Likewise.
1203         * darwin-nat.c (darwin_check_new_threads): Likewise.
1204         (darwin_attach_pid): Likewise.
1205         * dummy-frame.c (dummy_frame_push): Likewise.
1206         * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1207         * dwarf2loc.c (allocate_piece_closure): Likewise.
1208         * elfread.c (elf_symfile_segments): Likewise.
1209         * eval.c (ptrmath_type_p): Likewise.
1210         * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1211         * gdbtypes.c (alloc_type_arch): Likewise.
1212         (alloc_type_instance): Likewise.
1213         * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1214         * inf-child.c (inf_child_can_use_agent): Likewise.
1215         * inflow.c (get_inflow_inferior_data): Likewise.
1216         * infrun.c (save_infcall_suspend_state): Likewise.
1217         * jit.c (jit_reader_load): Likewise.
1218         (get_jit_objfile_data): Likewise.
1219         (get_jit_program_space_data): Likewise.
1220         (jit_object_open_impl): Likewise.
1221         (jit_symtab_open_impl): Likewise.
1222         (jit_block_open_impl): Likewise.
1223         (jit_frame_sniffer): Likewise.
1224         * linux-fork.c (add_fork): Likewise.
1225         * maint.c (make_command_stats_cleanup): Likewise.
1226         * objfiles.c (get_objfile_pspace_data): Likewise.
1227         * opencl-lang.c (struct lval_closure): Likewise.
1228         * osdata.c (osdata_start_osdata): Likewise.
1229         * progspace.c (new_address_space): Likewise.
1230         (add_program_space): Likewise.
1231         * remote-sim.c (get_sim_inferior_data): Likewise.
1232         * sh-tdep.c (sh_gdbarch_init): Likewise.
1233         * skip.c (Ignore): Likewise.
1234         (skip_delete_command): Likewise.
1235         * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1236         (library_list_start_library): Likewise.
1237         (solib_aix_current_sos): Likewise.
1238         * solib-darwin.c (get_darwin_info): Likewise.
1239         (darwin_current_sos): Likewise.
1240         * solib-dsbt.c (get_dsbt_info): Likewise.
1241         * solib-ia64-hpux.c (new_so_list): Likewise.
1242         (ia64_hpux_get_solib_linkage_addr): Likewise.
1243         * solib-spu.c (append_ocl_sos): Likewise.
1244         (spu_current_sos): Likewise.
1245         * solib-svr4.c (get_svr4_info): Likewise.
1246         (svr4_keep_data_in_core): Likewise.
1247         (library_list_start_library): Likewise.
1248         (svr4_default_sos): Likewise.
1249         (svr4_read_so_list): Likewise.
1250         * solib-target.c (library_list_start_library): Likewise.
1251         (solib_target_current_sos): Likewise.
1252         * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1253         * symfile-debug.c (install_symfile_debug_logging): Likewise.
1254         * symfile.c (default_symfile_segments): Likewise.
1255         * target-descriptions.c (tdesc_data_init): Likewise.
1256         (tdesc_create_reg): Likewise.
1257         (struct tdesc_type *): Likewise.
1258         (tdesc_create_vector): Likewise.
1259         (tdesc_set_struct_size): Likewise.
1260         (struct tdesc_type *): Likewise.
1261         (tdesc_free_feature): Likewise.
1262         (tdesc_create_feature): Likewise.
1263         * windows-nat.c (windows_add_thread): Likewise.
1264         (windows_make_so): Likewise.
1265         * xml-support.c (gdb_xml_body_text): Likewise.
1266         (gdb_xml_create_parser_and_cleanup): Likewise.
1267         (xml_process_xincludes): Likewise.
1268         * xml-syscall.c (allocate_syscalls_info): Likewise.
1269         (syscall_create_syscall_desc): Likewise.
1270
1271 2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>
1272
1273         * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1274         function, with code from i386_stap_parse_special_token.
1275         (i386_stap_parse_special_token_three_arg_disp): Likewise.
1276         (i386_stap_parse_special_token): Move code to the two functions
1277         above; simplify it.
1278
1279 2014-01-09  Pedro Alves  <palves@redhat.com>
1280             Hui Zhu  <hui@codesourcery.com>
1281
1282         PR gdb/16101
1283         * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1284         bp_err_string.  Don't mark the location shlib_disabled if the
1285         error thrown wasn't a generic or memory error.  Catch errors
1286         thrown while inserting breakpoints in overlayed code.  Output
1287         error message of software breakpoints.
1288         * remote.c (remote_insert_breakpoint): If this breakpoint has
1289         target-side commands but this stub doesn't support Z0 packets,
1290         throw NOT_SUPPORTED_ERROR error.
1291         * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1292         * target.h (target_insert_breakpoint): Extend comment.
1293         (target_insert_hw_breakpoint): Add comment.
1294
1295 2014-01-08  Pedro Alves  <palves@redhat.com>
1296
1297         * remote.c (remote_add_thread): Add threads silently if starting
1298         up.
1299         (remote_notice_new_inferior): If in all-stop, and starting up,
1300         don't call notice_new_inferior.
1301         (get_current_thread): New function, factored out from ...
1302         (add_current_inferior_and_thread): ... this.  Adjust.
1303         (remote_start_remote) <all-stop>: Fetch the thread list.  If we
1304         found any thread, then select the remote's current thread as GDB's
1305         current thread too.
1306
1307 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1308
1309         * NEWS: Create a new section for the next release branch.
1310         Rename the section of the current branch, now that it has
1311         been cut.
1312
1313 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1314
1315         GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1316         * version.in: Bump version to 7.7.50.DATE-cvs.
1317
1318 2014-01-08  Yao Qi  <yao@codesourcery.com>
1319
1320         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1321         type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
1322         (spu_xfer_partial): Cast 'buf' to 'const char *'.
1323
1324 2014-01-08  Yao Qi  <yao@codesourcery.com>
1325
1326         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1327         return value of bfd_get_filename to symbol_file_add_from_bfd.
1328
1329 2014-01-08  Pierre Muller  <muller@sourceware.org>
1330
1331         Fix PR16201.
1332         * coff-pe-read.c (struct read_pe_section_data): Add index field.
1333         (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1334         to prim_record_mininal_symbol_and_info.
1335         (add_pe_forwarded_sym): Use known section number of forwarded symbol
1336         in call to prim_record_minimal_symbol_and_info.
1337         (read_pe_exported_syms): Set index field of section_data.
1338
1339 2014-01-07  Andrew Pinski  <apinski@cavium.com>
1340
1341         * features/aarch64-core.xml (cpsr): Change to be 64bit.
1342         * features/aarch64.c: Regenerate.
1343
1344 2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>
1345
1346         * target.c (return_null): Define.
1347         (update_current_target): Use it instead of return_zero for
1348         functions that return a pointer.
1349
1350 2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
1351
1352         * source.c (add_path): Fix check for duplicated paths in the previously
1353         included paths.
1354
1355 2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>
1356
1357         * ada-lang.c: Remove duplicated include statements.
1358         * alphabsd-nat.c: Ditto.
1359         * amd64-darwin-tdep.c: Ditto.
1360         * amd64fbsd-nat.c: Ditto.
1361         * auto-load.c: Ditto.
1362         * ax-gdb.c: Ditto.
1363         * breakpoint.c: Ditto.
1364         * dbxread.c: Ditto.
1365         * fork-child.c: Ditto.
1366         * gdb_usleep.c: Ditto.
1367         * i386-darwin-tdep.c: Ditto.
1368         * i386fbsd-nat.c: Ditto.
1369         * infcmd.c: Ditto.
1370         * inferior.c: Ditto.
1371         * jv-lang.c: Ditto.
1372         * linux-nat.c: Ditto.
1373         * linux-tdep.c: Ditto.
1374         * m68kbsd-nat.c: Ditto.
1375         * m68klinux-nat.c: Ditto.
1376         * microblaze-tdep.c: Ditto.
1377         * mips-linux-tdep.c: Ditto.
1378         * mn10300-tdep.c: Ditto.
1379         * nto-tdep.c: Ditto.
1380         * opencl-lang.c: Ditto.
1381         * osdata.c: Ditto.
1382         * printcmd.c: Ditto.
1383         * regcache.c: Ditto.
1384         * remote-m32r-sdi.c: Ditto.
1385         * remote.c: Ditto.
1386         * symfile.c: Ditto.
1387         * symtab.c: Ditto.
1388         * tilegx-linux-nat.c: Ditto.
1389         * tilegx-tdep.c: Ditto.
1390         * tracepoint.c: Ditto.
1391         * valops.c: Ditto.
1392         * vaxbsd-nat.c: Ditto.
1393         * windows-nat.c: Ditto.
1394         * xtensa-tdep.c: Ditto.
1395
1396 2014-01-07  Yao Qi  <yao@codesourcery.com>
1397
1398         * spu-linux-nat.c (_initialize_spu_nat): Declare.
1399
1400 2014-01-07  Yao Qi  <yao@codesourcery.com>
1401             Joel Brobecker  <brobecker@adacore.com>
1402
1403         * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1404         (pdc_write_regs): Likewise.
1405         (fetch_regs_kernel_thread): Likewise.
1406         (store_regs_kernel_thread): Likewise.
1407
1408 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1409
1410         * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1411         tagged type objects to their actual type.
1412
1413 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1414
1415         * ada-valprint.c (print_field_values): Add "language" parameter.
1416         Update calls to print_field_values and print_variant_part.
1417         Pass new parameter "language" in call to val_print instead
1418         of "current_language".  Replace call to ada_val_print by call
1419         to val_print.
1420         (print_variant_part): Add "language" parameter.
1421         (ada_val_print_struct_union): Update call to print_field_values.
1422
1423 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1424
1425         * ada-valprint.c (ui_memcpy): Delete.
1426         (ada_print_floating): Update documentation.  Add empty line
1427         between between function documentation and implementation.
1428         Delete variable "buffer".  Use ui_file_xstrdup in place of
1429         ui_file_put.  Minor adjustments following this change.
1430
1431 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1432
1433         * ada-valprint.c (ada_val_print_string): New function,
1434         extracted from ada_val_print_array.
1435         (ada_val_print_array): Replace extracted code by call
1436         to ada_val_print_string followed by a return.  Move
1437         "else" branch to the function's top block.
1438
1439 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1440
1441         * ada-valprint.c (ada_val_print_array): Move implementation
1442         down.  Rename parameter "offset" and "val" into "offset_aligned"
1443         and "original_value" respectively.  Add parameter "offset".
1444
1445 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1446
1447         * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1448         re-organizing the code. Change the "???" message printed
1449         when target type is a TYPE_CODE_UNDEF into
1450         "<ref to undefined type>".
1451
1452 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1453
1454         * ada-valprint.c (print_record): Delete, implementation inlined...
1455         (ada_val_print_struct_union): ... here.  Remove call to
1456         ada_check_typedef in inlined implementation.
1457
1458 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1459
1460         * ada-valprint.c (ada_val_print_gnat_array): New function,
1461         extracted from ada_val_print_1;
1462         (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1463         (ada_val_print_flt, ada_val_print_struct_union)
1464         (ada_val_print_ref): Likewise.
1465         (ada_val_print_1): Delete variables i and elttype.
1466         Replace extracted-out code by call to corresponding
1467         new functions.
1468
1469 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1470
1471         * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1472
1473 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1474
1475         * ada-valprint.c (ada_val_print_1): Replace calls to
1476         ada_val_print_1 by calls to val_print.
1477
1478 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1479
1480         * ada-valprint.c (ada_val_print_1): Add parameter "language".
1481         Update calls to self accordingly.  Replace calls to c_val_print
1482         by calls to val_print.
1483
1484 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1485
1486         * ada-valprint.c (print_record): Delete declaration.
1487         (adjust_type_signedness, ada_val_print_1): Likewise.
1488         (ada_val_print): Move function implementation down.
1489         (print_variant_part, print_field_values, print_record):
1490         Move function implementation up.
1491
1492 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1493
1494         * python/py-type.c (typy_get_name): New function.
1495         (type_object_getset): Add entry for attribute "name".
1496         * NEWS: Add entry mentioning this new attribute.
1497
1498 2014-01-07  Yao Qi  <yao@codesourcery.com>
1499
1500         * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1501         statement.
1502
1503 2014-01-07  Yao Qi  <yao@codesourcery.com>
1504
1505         * gnu-nat.c (info_port_rights): Add qualifier const to
1506         argument args.
1507
1508 2014-01-07  Yao Qi  <yao@codesourcery.com>
1509
1510         * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1511
1512 2014-01-07  Yao Qi  <yao@codesourcery.com>
1513
1514         * gnu-nat.c (make_inf) Update declaration.
1515         (make_inf): Make it static.
1516         (inf_set_traced): Likewise.
1517         (inf_port_to_thread, inf_task_died_status): Likewise.
1518
1519 2014-01-07  Yao Qi  <yao@codesourcery.com>
1520
1521         * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1522
1523 2014-01-07  Yao Qi  <yao@codesourcery.com>
1524
1525         * gnu-nat.c (_initialize_gnu_nat): Declare.
1526
1527 2014-01-07  Yao Qi  <yao@codesourcery.com>
1528
1529         * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1530         'enum bfd_endian'.
1531         (struct gdbarch_info) <byte_order>: Change type to
1532         'enum bfd_endian'.
1533         <byte_order_for_code>: Likewise.
1534         * gdbarch.c, gdbarch.h: Regenerated.
1535
1536 2014-01-06  Sasha Smundak  <asmundak@google.com>
1537
1538         * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1539
1540 2014-01-06  Tom Tromey  <tromey@redhat.com>
1541
1542         * doublest.c (convert_doublest_to_floatformat): Use const, not
1543         CONST.
1544         * somread.c (som_symtab_read): Likewise.
1545
1546 2014-01-07  Hui Zhu  <hui@codesourcery.com>
1547
1548         * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1549         (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1550         (gdb_bfd_fopen): Ditto.
1551         (gdb_bfd_openr): Ditto.
1552         (gdb_bfd_openw): Ditto.
1553         (gdb_bfd_openr_iovec): Ditto.
1554         (gdb_bfd_fdopenr): Ditto.
1555         * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1556         * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1557         with xstrdup.
1558         * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1559         with xstrdup.
1560         * symfile-mem.c (symbol_file_add_from_memory): Removed
1561         gdb_bfd_stash_filename.
1562
1563 2014-01-03  Doug Evans  <dje@google.com>
1564
1565         * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1566         output.
1567
1568 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1569
1570         Update year range in copyright notice of all files.
1571
1572 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1573
1574         * top.c (print_gdb_version): Set copyright year to 2014.
1575
1576 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1577
1578         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1579
1580 For older changes see ChangeLog-2013.
1581 \f
1582 Local Variables:
1583 mode: change-log
1584 left-margin: 8
1585 fill-column: 74
1586 version-control: never
1587 coding: utf-8
1588 End: