1 Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3 * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
4 * configure.in: Remove comment about m68k-em.mt.
5 * Makefile.in: Remove references.
7 Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
9 * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
12 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
14 * target.c (target_preopen): If target_kill doesn't remove the
15 target from the stack, use pop_target to do it.
17 * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
18 of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
19 changes to stabsread.c from summer 1993.
21 * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
22 printing the program, rather than passing NULL to printf.
23 (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
24 try to call UDIDisconnect again. Print better message.
25 (udi_kill): Just call UDIDisconnect ourselves, rather than doing
27 (udi_create_inferior): If udi_session_id is negative, open a new
28 TIP rather than giving an error.
30 * config/mips/mipsm3.mh, config/i386/i386m3.mh,
31 config/ns32k/ns32km3.mh: Define NAT_FILE.
32 * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
33 (it was inconsistent and namespace-wrong) to NM_M3_H.
34 * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
35 (m3_open): New function.
37 * TODO: Update Mach section.
39 * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
41 Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
43 * printcmd.c (printf_command): Add missing single-letter
44 backslash-escape sequences, and improve error message.
46 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
48 * corelow.c (solib_add_stub, core_open): Pass address of from_tty
49 rather than trying to shove an int into a pointer and back out
50 again. This avoids compiler warnings.
52 * defs.h (alloca): Declare as void *, not char *, on hpux.
53 Don't prototype it, just declare the return type.
55 Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
57 * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
58 (REGISTER_CONVERT_TO_RAW): Add missing backslash.
60 Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
62 * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
63 ZERO_REGNUM, just read it as zero without talking to the board.
65 * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
67 * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
68 to store_floating, not nonexistent variable len.
70 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
72 (mips_store_word): Change calling convention to return errors, and
73 to provide old contents if the caller wants it.
74 (mips_xfer_memory): Deal with errors from mips_store_word.
75 * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
76 define now that remote-mips.c doesn't use BREAKPOINT.
78 * remote-mips.c (mips_create_inferior): Call warning if arguments
79 specified, and then execute "set args" command. Call error, not
80 mips_error, if executable file not specified.
82 * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
85 * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
88 Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
90 * value.h (print_longest): Rename "value" to "val" in prototype
91 declaration because some compilers don't like arguments whose
92 names are the same as types.
93 * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
94 before passing it to remote_*_bytes.
96 Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
98 * h8500-tdep.c (saved_pc_after_call): The size of the
99 pc is memory model dependent. (segmented_command,
100 unsegmented_command, _initialize_h8500_tdep): New commands to
102 * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
104 * remote-hms.c (hms_load): Remove breakpoints when loaded.
105 (hms_wait): Use new status structure
106 (hms_open): Push the target here. (hms_before_main_loop): Not
107 here. (supply_val, hms_fetch_register, hms_store_register): Cope
108 with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
109 * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
110 all registers in a compact way.
112 Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
114 * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
115 as CORE_ADDR to match definition in rs6000-tdep.c.
117 Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
119 * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
120 * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
121 definitions into the psymtab.
123 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
125 * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
126 a special exceptionSize for the 68332.
128 * remote-udi.c (udi_attach): If no arguments, print error.
130 Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
132 * Makefile.in (VERSION): Bump to 4.12.1
133 * NEWS, README: Update to match 4.12 release.
135 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
137 * command.c (empty_sfunc): New function.
138 (add_set_cmd): Use it instead of not_just_help_class_command.
139 (not_just_help_class_command): Change calling convention back to
140 what it was before yesterday's change.
142 * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
143 of the type if present.
145 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
147 * printcmd.c (decode_format): Don't blithely set the size for
148 an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
150 * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
151 If BFD64, make a LONGEST a BFD_HOST_64_BIT.
152 * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
153 always just check against INT_MIN and INT_MAX (this also fixes things
154 if sizeof (long) > sizeof (int), e.g. Alpha).
155 * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
156 Don't define LONGEST or BUILTIN_TYPE_LONGEST.
157 * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
158 BUILTIN_TYPE_UNSIGNED_LONGEST.
159 * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
160 longest_int and longest_unsigned_int.
161 * value.h (struct value): Just align to LONGEST, rather than worrying
162 about CC_HAS_LONG_LONG.
163 * valarith.c (value_binop): Figure out type ourself based on
164 sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
165 point is that we don't depend on CC_HAS_LONG_LONG anymore.
166 * valprint.c (val_print_type_code_int): Just call
167 extract_unsigned_integer directly, rather than going through
169 * printcmd.c (decode_format): Remove code which would sometimes
170 change 'g' size to 'w' for integers. print_scalar_formatted handles
171 printing huge integers well enough, thank you.
173 * command.c (add_set_cmd, not_just_help_class_command): Change
174 to make this the sfunc, not cfunc, since that is how we call it.
175 * command.h: Comment difference between sfunc and cfunc.
176 * demangle.c (set_demangling_command): Add third arg since that
178 (_initialize_demangler): Use sfunc, not cfunc, for
179 set_demangling_command, since that is how it is called.
180 Remove show_demangling_command; it has no effect.
182 * command.c (shell_escape): Report errors correctly (with error
183 message from strerror).
185 Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
187 * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
188 x_scnlen.l rather than x_scnlen to match corresponding change in
191 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
193 * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
194 Change comments regarding TYPE_CODE_BOOL.
195 * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
196 regardless of the language.
197 (value_true): Just call value_logical_not regardless of language.
198 * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
199 Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
200 * language.h: Improve comment for la_builtin_type_vector.
201 * m2-lang.c (_initialize_m2_language): Don't add any fields to
202 builtin_type_m2_bool.
204 Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
206 * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
207 Define IN_SIGTRAMP and backtrace correctly through signal handlers.
209 Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
211 * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
212 by restarting the ioctl.
214 Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
216 * target.h (target_wait): Add comment about calling
219 Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
221 * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
222 additional arguments.
223 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
225 Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
227 * sparc-stub.c: Remove unnecessary #include of memory.h.
229 Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
231 * mips-tdep.c: Remove code which sets saved_regs from
232 init_extra_frame_info and put it in new function mips_find_saved_regs.
233 (READ_FRAME_REG): Remove macro and replace uses with the expansion.
234 * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
235 check if it is NULL and call mips_find_saved_regs if so.
237 * remote-mips.c: Use unfiltered, not filtered, output most places.
239 * blockframe.c (get_prev_frame_info): Detect and stop an infinite
240 backtrace. Revise comments.
242 Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
244 * mdebugread.c (parse_procedure): Remove _sigtramp kludges for
245 alpha and irix. The _sigtramp case has to be handled properly
246 in the tdep files if we have no ecoff debugging info.
247 * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
248 mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
249 without PC_REGNUM kludge.
250 * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
251 Clean up handling of mips sigtramp frames, improve comments.
253 Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
255 * paread.c (read_unwind_info): Fix typo.
257 * paread.c (pa_symtab_read): Update the "check_strange_names"
258 filter to match GCC's current output. Filter out section symbols
259 (which the HP linker sometimes puts in the wrong place).
261 Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
263 * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
265 * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
267 * Makefile.in: Remove all references to sparcly-nat.c.
269 * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
270 remote-sim.h directly, rather than via $(remote_utils_h). This avoids
271 duplicating serial.h and target.h.
273 * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
274 are not used anywhere (a 5 Oct 1993 change removed the uses).
276 * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
277 * config/m68k/es1800.mt: Add comment.
278 * remote-es.c: Extensive changes to update to current conventions.
280 * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
281 If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
282 to achieve the desired timeout.
283 * serial.h (serial_t): Add field timeout_remaining.
285 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
287 * c-exp.y (yylex): Reenable nested type code.
289 Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
291 * a29k-tdep.c (examine_tag): Add comment regarding argcount.
293 * remote-mips.c (mips_ops): Fix docstring.
295 * remote-bug.c (bug_ops): Remove spurious newline from docstring.
297 * config/m68k/tm-monitor.h: Changes to bring this into accordance
298 with the old tm-m68k-em.h:
299 (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
300 (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
301 (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
302 Add FIXME regarding GET_LONGJMP_TARGET.
304 * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
305 * infptrace.c (kill_inferior): Add comments.
306 * main.c (quit_command): Call target_close after we kill or
308 * remote-udi.c (udi_close): Don't error() if QUITTING.
310 Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
312 * configure.in: Make m68k-coff and aout add monitor support in
313 addition to the standard serial support.
315 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
317 * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
320 Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
322 * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
323 * elfread.c (record_minimal_symbol_and_info),
324 dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
326 Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
328 * i386-stub.c: Add ".text" right before "mem_fault:".
330 * main.c (baud_rate): Add FIXME comment about printing -1 value.
332 * remote-utils.c (usage): Fix message to be accurate and conform
333 more closely to normal conventions.
335 * remote-utils.c (gr_files_info): Have the exec_bfd test control
336 whether to show information about exec_bfd, and not control whether
337 to show information about device and speed.
339 * remote-utils.c (gr_open): If sr_get_device returns NULL, give
340 usage message, don't dump core.
342 * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
343 for variable size array.
344 (bug_fetch_register, bug_store_register): Rename "value" to
345 "fpreg_buf" because some compilers don't like variables whose
346 names are the same as types.
347 (bug_store_register): Use a cast when converting char * to
350 * symmisc.c (maintenance_print_symbols): Don't refer to the name
351 of the command in error message (the text was referring to the old
352 name of the command).
354 * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
356 * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
357 full details on structure elements without names. This partially
358 reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
359 of those changes was accidental.
361 * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
362 defined, make it an error to specify a single argument which is not
365 * Makefile.in (version.c), main.c (print_gdb_version): Use
366 host_alias and target_alias, not host_canonical and
367 target_canonical, to print configuration.
369 Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
371 * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
372 of builtin_type_long. It is necessary to get a type which is
373 TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
375 Fix many sins which will come up in 32 bit x 64 bit GDB, and
376 various miscellaneous things discovered in the process:
377 * printcmd.c, defs.h (print_address_numeric): New function.
378 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
379 breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
380 cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
381 printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
383 * utils.c, defs.h (gdb_print_address): New function.
384 * expprint (dump_expression), gdbtypes.h: Use it.
385 * breakpoint.c (describe_other_breakpoints),
386 symmisc.c (dump_symtab, print_symbol):
387 Use filtered not unfiltered I/O.
388 (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
389 just run gdb under a debugger for this (and it had problems with
390 printing addresses, how to print b->shadow, etc.).
391 * buildsym.c (make_blockvector), core.c (memory_error),
392 exec.c (print_section_info), maint.c (print_section_table),
393 mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
394 symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
395 Add comments saying code is broken. Marked with "FIXME-32x64".
396 * dbxread.c (process_one_symbol), partial-stab.h (default),
397 remote-vx.c (vx_run_files_info):
398 Don't cast int being passed to local_hex_string.
399 * symmisc.c (print_symbol): Don't cast long being passed to %lx.
400 * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
402 * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
404 * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
405 * source.c: Include <sys/types.h> regardless of USG.
407 Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
409 * valops.c (value_assign): Set `type' after coercing toval.
410 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
411 Use extract_unsigned_integer to get the address of a reference.
413 Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
415 * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
416 AIX can use ? instead of \ for continuation. Deal with it.
418 * paread.c (read_unwind_info): Just assign to objfile->obj_private,
419 not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
420 the HP compiler in ANSI mode doesn't like.
422 * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
423 based on USG, rather than defining HAVE_SIGSETMASK to an
424 expression containing defined. Having a macro used in #if expand
425 to an expression containing "defined" is undefined according to
426 ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
429 Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
431 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
432 Clean up the changes of 11 Jan, as recommended by Peter Schauer.
434 Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
436 * ch-exp.y (match_string_literal): Allow a zero-length string.
437 * ch-lang.c (chill_printstr): Don't print zero-length string funny.
439 Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
441 * i386aix-nat.c (i386_float_info): Reverse order of registers before
442 passing them to print_387_status.
443 (print_387_status): Don't subtract top from 7 before using it.
444 * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
445 from 7; the above explains it.
447 Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
449 * mips-tdep.c (init_extra_frame_info): Use frame relative stack
450 pointer value when fixing up the frame at the start of a function.
452 Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
454 * lynx-nat.c (fetch_core_registers): Load the I & L regs for the
455 Sparc from the stack.
457 Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
459 * remote-mips.c (mips_initialize): Clear mips_initializing via
460 cleanup chain, not directly.
462 * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
463 of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are
464 munging the timeout due to the limited range of c_cc[VTIME].
466 * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
467 * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
468 m3-nat.c (m3_create_inferior): Pass it.
469 * procfs.c: Remove ptrace function. It was declared in a way which
470 conflicted with the prototype in unistd.h on Solaris.
472 Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
474 * sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc
475 in the sigcontext if it is a signal trampoline frame.
476 * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
479 Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com)
481 * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
482 config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to
483 tm-sparc.h so they can be overridden if necessary.
485 Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com)
487 * lynx-nat.c: Add Sparc support.
488 * sparcly-nat.c: Remove. It's useless.
489 * config/sparc/nm-sparclynx.h: Rewrite.
490 * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o
492 * config/sparc/tm-sparclynx.h: Rewrite.
494 Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
496 * rs6000-pinsn.c: Use the new disassembler in the opcodes
497 directory. Old code was discarded, since the new opcode table has
500 Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com)
502 * Makefile.in (realclean): Remove info files per make-stds.texi.
504 Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
506 * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
507 if N_SO_ADDRESS_MAYBE_MISSING is defined.
508 * config/sparc/tm-sun4sol2.h: Define it.
510 Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
512 * printcmd.c (print_address_symbolic): Unconditionally use msymbol
513 if we did not find a symbol.
515 Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
517 * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
520 * hppab-nat.c (call_ptrace): Delete redundant function.
521 (kill_inferior, attach, detach, child_resume): Likewise.
522 (child_xfer_memory): Likewise.
524 * hppah-nat.c (call_ptrace): Delete redundant function.
525 (kill_inferior, attach, detach, child_resume): Likewise.
527 * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
529 * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
531 * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
533 * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
534 (CHILD_XFER_MEMORY): Define.
535 (PT_*): Define so that generic infptrace.c code can be used.
537 Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
539 * xcoffread.c (xcoff_symfile_read): Make second parameter a
540 struct section_offsets *, not a (nonexistent) struct section_offset *.
542 * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
543 internal_xcoff_symtab, not an array of one of them. Change lots of
544 "main_aux" to "&main_aux" and so on.
546 * coffread.c, xcoffread.c: Include <coff/internal.h>
549 Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
551 * coffread.c (coff_getfilename): Make it not static.
553 * xcoffread.c (read_xcoff_symtab): complain() not abort().
555 * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
556 a completely gratuitous difference between xcoffread.c and coffread.c).
558 Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
560 * infrun.c (wait_for_inferior): Don't set frame for
561 step_resume_breakpoint for IN_SIGTRAMP cases.
563 * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
564 breakpoint.c (bpstat_what): Move step_resume from its own field of
565 the struct bpstat_what into the main_action. Make it override
566 other breakpoints. This is a conservative change in the sense
567 that before the step resume breakpoint was a breakpoint.c
568 breakpoint, hitting the step resume breakpoint overrode even
569 calling bpstat_stop_status.
571 Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
573 * infrun.c (normal_stop): Set stop_pc after popping the dummy frame
574 in case execution was stopped in the called function.
575 * stack.c (print_frame_info, frame_info): If backtracing through
576 a call dummy, handle the starting source line number on a line
577 boundary like backtracing through sigtramp.
578 * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
579 for call dummy frame right. Remove old test for dummy frame,
580 it has been unused at least since gdb-3.5.
581 * sparc-tdep.c (sparc_push_dummy_frame): Set return address register
584 Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
586 * infcmd.c (signal_command): Accept 0 as legitimate signal number.
588 Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
590 * infrun.c (signals_info), target.c (target_signal_from_name):
591 Use ugly casts to avoid enumvar < enumvar or enumvar++.
593 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
595 * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
596 * inflow.c (terminal_ours_1): When discussing how to deal with the
597 tty state, make note of query() as well as readline.
599 * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
600 signals for which stop and print are cleared by default.
602 Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
604 * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
605 reserved fields to hold a stub unwind entry type. Fix typo.
606 (stub_unwind_entry): New structure for raw stub unwind entries.
607 (stub_unwind_types): The types of stubs we may encounter.
608 (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
609 * hppa-tdep.c (rp_saved): Use additional information provided
610 by linker stub unwind descriptors.
611 (frameless_function_invocation): Likewise.
612 (frame_chain_valid): Likewise.
613 * paread.c (compare_unwind_entries): New function for sorting
614 unwind table entries.
615 (read_unwind_info): Rewrite to remove dependency on host endianness.
616 Read in data from the $UNWIND_END$ subspace which contains linker
617 stub unwind descriptors. Merge that data into the basic unwind
620 * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
622 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
624 * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
625 from either the symbol name or the auxent.
626 * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
629 Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com)
631 * Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h.
633 Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
635 * README: Update notes for alpha port.
637 Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
639 * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
640 for operation fault, constraint fault, and type fault.
642 Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
644 * Makefile.in (init.c): Add comment explaining formatting conventions.
646 * c-exp.y (parse_number): Assign to temporary between the right
647 shifts, to work around a bug in the SCO compiler.
649 * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
650 Add various files which were added to GDB recently.
652 * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
655 * Makefile.in: Add mostlyclean target.
657 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
661 Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com)
663 * main.c (show_commands): Make return type of extern
664 history_get be HIST_ENTRY, rather than struct _hist_entry.
665 (The latter loses with the upcoming merged readline.)
667 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
669 * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
670 const char *, not char *.
672 * symtab.h (struct symbol): Make section short, not unsigned short.
674 * symtab.c (lookup_symbol): Add comment about QUIT here.
676 * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
678 * c-exp.y (parse_number): Check for overflow regardless of range
679 checking. Fix overflow check to use unsigned LONGEST, not
682 * c-exp.y (parse_number): Make it so that integer constants are
683 builtin_type_long_long if builtin_type_long isn't big enough or if
684 an "LL" suffix is used. Properly handle "UL" or "LU" suffixes.
686 * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
687 Print our "()" first, then recurse for the target type.
689 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
691 * remote-udi.c (udi_create_inferior): Quote empty execfile argument.
693 * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
695 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
697 * utils.c (request_quit): Re-establish signal handler regardless
700 * config/mips/xm-irix4.h: Define HAVE_TERMIOS.
702 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
704 * i960-tdep.c: Include target.h.
706 Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com)
708 * lynx-nat.c (sys/wait.h): Don't use absolute pathname.
710 Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
712 * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
713 changes (status -> ourstatus; declare status, etc.).
714 * config/nm-lynx.h: Fix child_wait prototype and include target.h.
716 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
718 * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
720 Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
722 * remote-mips.c (mips_request, mips_wait): Correct prototypes.
724 Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
726 * config/i386/xm-linux.h: Define HAVE_TERMIOS.
728 Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
730 * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
732 Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
734 * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
735 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
737 * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
740 Add search to target vector (#if 0'd until after 4.12):
741 * target.h (to_search, target_search): Add.
742 * gdbcore.h, core.c (generic_search): Add.
743 * remote.c (remote_search): Add.
744 * a29k-tdep.c (init_frame_info): Use target_search to find traceback
747 * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
748 is on, call find_pc_function rather than relying just on the minimal
749 symbols (probably only matters for symbol readers which don't put
750 statics in the minimal symbols, but changing this strikes me as
751 not conservative enough).
752 Initialize name_location in all cases.
753 If no symbol and no msymbol, don't print anything symbolic.
755 * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
757 Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
759 * printcmd.c (print_address_symbolic): Make it search the
760 symtabs for variables as well as functions. Add `set print
761 fast-symbolic-addr' and default it to fast (the old way).
762 Print line numbers for data items as well as functions.
764 * symtab.c (find_addr_symbol): Return the symtab and the symbol
765 address, if a symbol is found (take two more args pointing to
766 where to store these results).
768 * symtab.h (find_addr_symbol): Add prototype.
770 Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
772 * objfiles.h: Fix comments to reflect the fact that the phrase
773 "top of stack" always refers to where the pushing and popping takes
774 place, regardless of whether it is at the highest or lowest address.
776 Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
778 * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
779 compiler generated tag names.
780 * mdebugread.c (parse_type): Handle cross references to qualified
782 * valops.c (value_struct_elt): Improve error message if the
783 address of a method is requested from an object instance.
784 * valops.c (search_struct_method): Make name_matched non-static
785 to get it initialized correctly.
786 * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
787 exclude segment register which are not writable on newer SCO versions.
789 Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
791 * go32-xdep.c: Remove unused function uerror.
792 (sigsetmask): Declare return type. Declare argument (to match the
793 way it is called). Explicitly return 0.
795 Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
797 * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
798 partial_symbol): Shrink the storage sizes of symbols, by making
799 enums into 1-byte bitfields when compiled __GNUC__, moving all the
800 enums and small ints to the end of each struct to improve
801 alignment, and switching the section number from int to unsigned
804 Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
806 * symtab.c (find_addr_symbol): New routine that will find the nearest
807 symbol associated with an address. It does so by exhaustive
808 search of the symtabs, so it's slow but complete.
810 Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
812 * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
813 to [0,0] rather than [0, end of first source file]. This avoids
814 problems with other parts of GDB looking for linetables in the
815 _globals_ symtab. Eliminate variables num_object_files and
816 first_object_file_end.
818 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
820 * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
821 (pop_frame): Restore PC2 and LR0 from dummy frames.
822 (push_dummy_frame): Save PC2 and LR0 into dummy frames.
823 (setup_arbitrary_frame): Handle 3 args and set up real frames.
824 * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
825 (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
826 (SETUP_ARBITRARY_FRAME): Define.
828 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
830 * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
832 Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
834 * remote-udi.c (udi_resume): Correct prototype.
836 Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
838 * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
839 hppa_frame_find_saved_regs.
840 * hppa-tdep.c (dig_fp_from_stack): Delete function.
841 (prologue_inst_adjust_sp): New function.
842 (is_branch, inst_saves_gr, inst_saves_fr): New functions.
843 (skip_prologue): Completely rewrite to use unwind information.
844 (hppa_frame_find_saved_regs): Likewise.
846 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
848 * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
849 to convert a signal number with appropriate bounds checking.
851 * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
853 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
855 * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
856 print a newline to end the display anyway.
858 * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
859 coprocessor status regs) when popping a frame. This fixes
860 float exceptions that occur after calling inferior functions.
862 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
863 Read and write the fsr (float status register) to/from the child
864 process along with the float regs. Remove Peter Schauer's change
865 of May 24 '93, which has higher overhead and doesn't solve the
866 real problem (which was that FSR wasn't being set).
868 Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
870 * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
871 stack overflow check isn't right after the register stack
872 adjustment instruction. Metaware R2.3u compiler moves other
873 things in front of it. This fix isn't perfect but is what's
876 Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
878 * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
880 * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
882 * configure.in: Change accordingly.
884 Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
886 * m68k-stub.c, sparc-stub.c: removed spurious introduction of
887 _filtered io routines from these two files.
889 Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
891 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
892 config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
893 * mdebugread.c (parse_symbol): Handle enum sh.type produced by
895 * mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
897 Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
899 * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
900 printing to gdb_stderr.
902 * remote-udi.c (udi_kill): Don't close the connection, just set
903 inferior_pid to zero.
904 (udi_mourn): Call remove_breakpoints.
906 * remote-udi.c: Remove obsolete need_artificial_traps comment.
908 * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
910 Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
912 * symtab.c (lookup_symbol): Don't try adding .c to the name.
914 * remote-bug.c: At the start of each section, reset srec_frame
917 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
918 * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
919 * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
920 code which looks for those two waitkinds. Use switch statement.
921 * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
922 CHILD_SPECIAL_WAITSTATUS.
924 * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
925 * Move target_signal_from_host, target_signal_to_host, and
926 store_waitstatus from inftarg.c to target.c. procfs needs them.
927 * target.c: Include "wait.h" and <signal.h>.
928 * target.h, infrun.c (proceed), proceed callers: Pass new code
929 TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
930 enums being treated as unsigned and is cleaner.
931 * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
933 * infcmd.c (signal_command), infrun.c (signals_info):
934 Don't allow user to specify numeric equivalent of
935 TARGET_SIGNAL_DEFAULT.
937 Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
939 * config/alpha/alpha-netware.mt: New target support for Alpha
941 * configure.in: Add alpha-*-netware* target.
943 Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
945 * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
947 Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
949 * target.h: Add enum target_waitkind, enum target_signal, and
950 struct target_waitstatus. Change status argument to target_wait to
951 be struct target_waitstatus * instead of int *.
952 * target.h, infrun.c, all targets: Change type of signal arguments
953 to resume(), proceed(), and target_resume() from int to enum
955 * All targets (*_wait, *_resume): Change accordingly.
956 * infcmd.c (program_info, signal_command), throughout infrun.c,
957 * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
958 * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
959 signal code stuff right with the new signals would be non-trivial).
960 * inferior.h (stop_signal): Make it enum target_signal not int.
961 * target.c, target.h (target_signal_to_string, target_signal_to_name,
962 target_signal_from_name): New functions.
963 * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
964 store_waitstatus): New functions.
965 * procfs.c (procfs_notice_signals): Use them.
966 * i960-tdep.c (i960_fault_to_signal): New function, to replace
968 * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
970 * objfiles.c (build_objfile_section_table): Don't abort() if
971 objfile->sections is already set.
973 * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
974 to match recent change to exec.c.
978 * main.c (print_gdb_version): Change year to 1994.
980 * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
981 * Makefile.in (NONSRC): Add ChangeLog-93.
983 Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
985 * stabsread.c (read_type): Allow defining several type numbers
986 at once (e.g. "(1,2)=(3,4)="...).
988 * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
990 * breakpoint.c (frame_in_dummy): Check PC as well as frame.
992 Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
994 * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
995 to process_one_symbol.
996 * symtab.c (find_pc_psymbol): Search global_psymbols as well to
997 avoid caching a bad endaddr in find_pc_partial_function.
999 Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1001 * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
1003 Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1005 * infrun.c (wait_for_inferior): Do not step or step resume past
1006 the end of a one-line function we just stepped into.
1008 For older changes see ChangeLog-93
1014 version-control: never