1 Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3 Update support for x86 Solaris 2.
4 * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
5 files for x86 Solaris 2.
6 * config/i386/i386sol2.mt, i386sol2.mh: Use them.
7 * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
8 carry flag from a given regset.
9 (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
10 is a SunPro transformed name.
11 * i386-tdep.c (sunpro_static_transform_name): New function to
12 extract the source name from a SunPro transformed name.
13 * inferior.h (procfs_first_available, procfs_get_pid_fd):
15 * infrun.c (wait_for_inferior): Handle breakpoint hit in
16 signal handler without intervening stop in sigtramp.
17 * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
18 instead of direct access to the status register.
19 (procfs_get_pid_fd): New function, returns procfs fd for a given pid.
20 * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
22 (sol_find_new_threads): Handle failed libthread_db initialization
24 * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
25 to check for a SunPro transformed symbol name.
27 Fri Apr 10 10:35:35 1998 John Metzler <jmetzler@cygnus.com>
29 * utils.c (fmthex): A formatting function for hexdumps
31 * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
32 bit pattern interpretations. mips_fetch_instruction does not work
33 for 16 bit instructions. Some confusion remains about sign
34 extension in backward branches.
35 (mips32_relative_offset): Sign extension
36 (mips32_next_pc): Major debugging, bit pattern interpretation
37 (print_unpack): debugging printf
38 (fetch_mips_16): new funtion, key on PC low bit, not symbol table
39 (mips16_next_16): Initial major debugging of this function. Lots
40 of bit pattern mistakes.
41 (mips_next_pc): key on low bit of PC, not symbol table.
42 * symfile.c(generic_load) : Added a download verification which
43 reads back the loade code. Download chunk size is now a defined
44 macro. Fixed a bug in which downloading slips into loading one
45 byte at a time. Lower level functions in monitor.c can load long
46 sequences of bytes and make use of these fixups. Referencing
47 bfd-start_address directly was incorrectly getting zero for start.
49 Thu Apr 9 19:20:32 1998 Ian Lance Taylor <ian@cygnus.com>
51 * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
54 Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
56 * top.c (print_gdb_version): Print 1998 now.
58 Wed Apr 8 16:57:22 1998 Philippe De Muyter <phdm@macqel.be>
60 * source.c: Remove obsolete decl of strstr().
62 Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com)
64 * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
65 patch of March 23 1998.
66 * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
67 patch of March 23 1998.
69 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
71 * mdebugread.c (parse_partial_symbols): If this is an .mdebug
72 section in an ELF file, override a symbol's ECOFF section with its
73 ELF section. Also, fix stabs continuation where a stabs string
74 continues for more than one continuation.
76 Mon Apr 6 09:17:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
78 * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
79 using MAX_REGISTER_RAW_SIZE.
81 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
83 * infrun.c: Fix prototype of signals_info to match static funtion.
85 Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
87 * sol-thread.c (sol_thread_store_registers): Save & restore new
88 value of single updated register to prevent accidental clobbering.
90 Wed Apr 1 22:01:09 1998 Mark Alexander <marka@cygnus.com>
92 * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
93 * config/sparc/sparclite.mt: Link in the erc32 simulator.
95 Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
97 * ns32k-tdep.c (flip_bytes, ns32k_localcount,
98 ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
101 * ns32knbsd-nat.c: New (?) file to support fetching and storing
102 registers on NetBSD hosts.
104 * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
107 * ns32km3-nat.c (reg_offset): Get order of floating point
108 registers correct. Add extra 32382 register offsets.
109 (REG_ADDRESS): define to point at correct part of thread
110 state. Use calls to "warning" instead of "message".
112 * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
113 REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
116 Wed Apr 1 13:43:07 1998 Philippe De Muyter <phdm@macqel.be>
118 * NEWS: m68k-motorola-sysv host support added.
119 * coffread.c (coff_start_symtab): Accept the filename as an argument,
120 set it here. Callers updated.
122 Wed Apr 1 23:13:23 1998 Andrew Cagney <cagney@b1.cygnus.com>
124 * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
125 FSR and FIR registers.
126 (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
127 (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
129 * config/mips/tm-mips64.h: Ditto.
131 Tue Mar 31 21:30:39 1998 Nick Clifton <nickc@cygnus.com>
133 * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
134 vector to the info structure when disassembling thumb
137 * coffread.c (coff_symtab_read, read_one_sym,
138 process_coff_symbol): Support Thumb symbol types.
140 * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
141 is defined) for function symbols.
143 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
145 * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to
146 return odd sized register quantities with only half of the first
149 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
152 Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com)
154 * rdi-share/Makefile.am, rdi-share/aclocal.m4,
155 rdi-share/configure: New files.
156 * rdi-share/configure.in: Rewritten to be an autoconf input file.
157 * rdi-share/Makefile.in, rdi-share/configure: Generated by
159 * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
160 to check environment.
162 Sun Mar 29 15:17:16 1998 Keith Seitz <keiths@onions.cygnus.com>
164 * tracepoint.c (trace_start_command): Set trace_running_p.
165 (trace_stop_command): Clear trace_running_p.
167 Sat Mar 28 15:19:48 1998 Stan Shebs <shebs@andros.cygnus.com>
169 * NEWS: Update for 4.17 release.
171 Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
173 * tracepoint.c (trace_status_command): Recognize a boolean return
174 value from the stub to indicate whether trace experiment is
175 running. Export this value as a global state variable
176 (trace_running_p) for use by the GUI. (from Michael Snyder)
177 (trace_pass_command) added call to modify_tracepoint_hook.
179 * tracepoint.h export trace_running_p
182 Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
184 * configure.in (sim-gpu2): Added target type checking to make
185 --with-sim-gpu2 option only valid for sky target.
186 * configure: Regenerated.
189 Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
191 * Makefile.in: Derive SHELL from configure.
192 * config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
193 config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
194 from SIM. This prevents dependency checking of -lm (under NT
195 native builds). (It is automatically added by configure if it
197 * doc/configure mswin/configure nlm/configure
198 testsuite/gdb.base/configure testsuite/gdb.c++/configure
199 testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
200 testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
201 Regenerate with autoconf 2.12.1 to fix shell issues for NT native
204 Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com)
206 * solib.c (solib_create_inferior_hook): Rewrite previous
207 change to check the type of file via BFD.
209 Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com)
211 * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
213 * solib.c (solib_create_inferior_hook): Relocate section addresses
214 if the alleged start address doesn't agree with the PC.
217 Mon Mar 23 13:07:22 1998 Frank Ch. Eigler <fche@cygnus.com>
219 * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure
220 option, to allow gdb+sim linking with sky GPU2 library.
221 * configure: Regenerated.
224 Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
226 merged changes from Foundry (list follows by file/author):
228 - Tom Tromey <tromey@cygnus.com>
229 * Makefile.in (gdbres.o): New target.
230 (WINDRES): New define.
231 * configure: Rebuilt.
232 * configure.in (WINDRES): Define.
233 (CONFIG_OBS): Include gdbres.o on Windows.
234 * gdbtool.ico: New file.
238 - Keith Seitz <keiths@onions.cygnus.com>
239 (wait_for): Don't reset the timeout_remaining for CYGWIN32,
240 since we now effectively poll the serial port.
241 Don't reset the current_timeout, either, since this member is used
242 by hardwire_readchar to track the timeout and call the ui_loop_hook.
243 (hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
244 second, update the UI, and loop around doing this until we have hit the real
245 timeout or we get data or an error. This will allow the UI to stay active
246 while gdb is "blocked" talking to the target.
247 - Martin M. Hunt <hunt@cygnus.com>
248 (wait_for): Do reset current_timeout
249 because it is only used to keep track of what the
250 current timeout for the scb is.
253 - Martin M. Hunt <hunt@cygnus.com>
254 (quit_confirm): Change exit message again
256 (pc_changed_hook): Add prototype.
257 - Tom Tromey <tromey@cygnus.com>
258 (quit_confirm): Added missing `else'.
259 (quit_confirm): Special-case message if init_ui_hook is
263 - Martin M. Hunt <hunt@cygnus.com>
264 (find_pc_sect_line): If no symbol information
265 is found, return correct pc anyway.
266 (find_methods): Comment out an apparently
267 bogus error message because it messes up Foundry.
270 - Martin M. Hunt <hunt@cygnus.com>
271 (_initialize_serial): Add a description of
275 - Martin M. Hunt <hunt@cygnus.com>
276 (write_register_gen): Add call to
277 pc_changed_hook if the PC is being changed.
280 - Martin M. Hunt <hunt@cygnus.com>
281 (pc_changed_hook): Define.
284 - Martin M. Hunt <hunt@cygnus.com>
285 (do_setshow_command): If no arguments are supplied,
286 don't dump core, instead print out an error message.
289 - Martin M. Hunt <hunt@cygnus.com>
290 Make set_raw_breakpoint, set_breakpoint_count,
291 and breakpoint_count non-static so they are accessible from
293 (enable_breakpoint): Enable breakpoint
294 with same disposition instead of changing all breakpoints
298 - Keith Seitz <keiths@onions.cygnus.com>
299 Add declarations for annotation hooks.
302 - Keith Seitz <keiths@onions.cygnus.com>
303 Add hooks: annotate_starting_hook, annotate_stopped_hook,
304 annotate_signalled_hook, annotate_exited_hook.
305 (annotate_starting): If hook exists, call it instead.
306 (annotate_stopped): If hook exists, call it instead.
307 (annotate_exited): If hook exists, call it instead.
308 (annotate_signalled): If hook exists, call it instead.
310 Fri Mar 20 14:45:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
312 * gdbserver/Makefile.in: add dependency on XM_CLIBS.
313 * gdbserver/low-sim.c (registers) force into alignment.
314 (create_inferior): Fix typo on new_argv; add abfd arg to
315 sim_open, sim_create_inferior. Add reg_size arg to
316 sim_fetch_register, sim_store_register. Make simulator
317 take a single-step to get into a known running state.
318 * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
319 * gdbserver/server.c: Add remote_debug variable to control
321 * gdbserver/server.h: Add prototypes for enable/disable_async_io.
322 * gdbserver/remote-utils.c: add verbose debugging output controlled
323 by "remote_debug" variable. Add call to "disable_async_io()"
324 to avoid being killed by async SIGIO signals.
325 * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
326 so that gdbserver can be built with the m32r simulator.
328 Fri Mar 20 09:04:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
331 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as
332 expression from REGISTER_VIRTUAL_TYPE.
333 (REGISTER_RAW_SIZE): Ditto.
334 (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit
338 * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
341 (builtin_type_{,u}int128): Ditto.
344 * gdbtypes.c (_initialize_gdbtypes): Initialize new types.
346 * mips-tdep.c (do_gp_register_row): Pad register value when GP
347 register is smaller than MIPS_REGSIZE.
349 * findvar.c (value_of_register): When raw and virtual register
350 values identical, check that sizes are consistent.
352 Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
354 * minsyms.c (compare_minimal_symbols): If addresses are identical,
355 then compare on names. Sorted list should have symbols with
356 identical addresses AND names adjacent, so dups can be discarded.
358 Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com)
360 * stabsread.c (define_symbol): Don't look for ',' as a LRS
363 Wed Mar 18 10:34:51 1998 Nick Clifton <nickc@cygnus.com>
365 * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
367 Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
369 * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix
370 when compiling with native cc, the compiler has broken long long
373 Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
375 * config/m68k/xm-sun3os4.h: Remove malloc declarations, they
376 are handled via autoconf now.
377 * remote.c (remote_ops, extended_remote_ops): Replace static
378 forward declaration by moving the static definition to the top of
379 the file, for old K&R compilers.
380 * tracepoint.c (collect_symbol, trace_start_command):
381 Replace ANSI string concatenation with K&R compatible simple string.
383 1998-03-11 Fred Fish <fnf@ninemoons.com>
385 * source.c (select_source_symtab): Don't reach error if we have
386 a current_source_symtab from reading in partial symbol table.
388 start-sanitize-vr4320
389 Tue Mar 10 16:15:13 1998 Gavin Koch <gavin@cygnus.com>
391 * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case.
394 Fri Mar 6 13:10:27 1998 Fred Fish <fnf@cygnus.com>
396 * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
398 * serial.h (struct serial_ops): Add drain_output, pointer to
399 function that waits for output to drain.
400 (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
401 * ser-unix.c (hardwire_drain_output): New function and prototype.
403 * ser-unix.c (hardwire_ops): Add entry for drain_output function.
404 * ser-tcp.c (tcp_ops): Ditto.
405 * ser-ocd.c (ocd_ops): Ditto.
406 * ser-mac.c (mac_ops): Ditto.
407 * ser-go32.c (dos_ops): Ditto.
408 * ser-e7kpc.c (e7000pc_ops): Ditto.
410 Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
412 * sparcl-tdep.c: fix #endif comments
414 Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
416 * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
418 Thu Mar 5 14:42:41 1998 Keith Seitz <keiths@onions.cygnus.com>
420 * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
421 error () so that we abort out of bdm_ppc_open.
423 Wed Mar 4 16:53:52 1998 Martin M. Hunt <hunt@cygnus.com>
425 * serial.c (_initialize_serial): Add a description of
428 * command.c (do_setshow_command): If no arguments are supplied,
429 don't dump core, instead print out an error message.
431 Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com)
433 * gdbtk.c (gdb_listfiles): Fix thinko in last change.
435 Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com)
437 * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.
439 Wed Mar 4 01:39:08 1998 Ron Unrau <runrau@cygnus.com>
441 * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
443 * config/mips/tm-mips.h: ditto
445 Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
447 * config/mips/tm-vr4xxx.h: implements vr4111 as saparate from 4300
448 * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
449 * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
450 * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
451 TARGET_PTR_BIT rather from sizeof(char *) on host.
453 Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
455 * alpha-nat.c (fetch_osf_core_registers): Renamed from
456 fetch_aout_core_registers.
457 (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change
458 flavour to bfd_target_unknown_flavour for OSF core files.
460 start-sanitize-vr4320
461 Tue Mar 3 11:12:39 1998 Gavin Koch <gavin@cygnus.com>
463 * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
467 Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
469 * breakpoint.c (_initialize_breakpoint): Make "en" an alias
470 for "enable" (so that it doesn't conflict with "end").
472 Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com)
474 * Makefile (VERSION): Bump to 4.17.1.
476 Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com)
478 * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
480 Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com)
482 * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
484 Mon Mar 2 16:47:11 1998 Philippe De Muyter <phdm@macqel.be>
486 * Makefile.in (distclean): Add `rm $(YYFILES)'.
488 Mon Mar 2 16:45:48 1998 Philippe De Muyter <phdm@macqel.be>
490 * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
493 Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com>
495 * configure.host, configure.tgt: Add sparc-linux.
496 * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
497 * config/sparc/*linux*: New files.
499 Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com)
501 * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
502 if we're big endian; else call print_insn_little_arm.
504 Mon Feb 24 11:24:57 1998 Richard Henderson <rth@cygnus.com>
506 * Makefile.in (BISON): Don't even pretend to use yacc.
507 (c-exp.tab.o): Use bison -o to use a unique intermediate file.
508 (jv-exp.tab.o, f-exp.tab.o, m2-exp.tab.o): Likewise.
510 Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
512 * remote-sim.c (gdbsim_fetch_register): Don't abort when the
513 register size is wrong.
516 Tue Feb 24 02:53:41 1998 And<rew Cagney <cagney@b1.cygnus.com>
518 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE,
519 REGISTE_RAW_SIZE): Re-define.
522 Thu Feb 19 16:49:48 1998 John Metzler <jmetzler@cygnus.com>
524 * target.c (debug_to_fetch_registers,debug_to_store_registers,
525 debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
526 64 bit targets crashed long long printfs.
528 Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
530 * symfile.c (read_target_int_array): rename read_target_long_array
531 and force the sizeof an ovly_table element to sizeof(long),
532 instead of sizeof(int).
534 Tue Feb 17 18:05:05 1998 Frank Ch. Eigler <fche@cygnus.com>
536 * remote-mips.c (mips_request): Use unsigned long during parsing
537 returned value from monitor, to prevent accidental sign extension.
539 Tue Feb 17 14:28:33 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
541 * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
542 * configure.in: Ditto.
543 * configure: Regenerated.
545 Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
547 * gdbtypes.c (check_typedef): Do not try to resolve the length of
548 a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
549 set TYPE_FLAG_TARGET_STUB as well.
551 Tue Feb 17 14:32:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
553 * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
554 Pass register size to sim_{fetch,store}_register. Check nr of
555 register bytes transfered is correct.
557 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
559 * remote-d10v.c (remote_d10v_open): Call push_remote_target
560 instead of open_remote_target.
562 * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
563 to translate addr/size when defined.
564 (open_remote_target): Delete.
566 * target.h (open_remote_target): Delete.
568 * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
570 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
572 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
575 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
577 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
580 Sun Feb 15 16:10:50 1998 Ron Unrau <runrau@cygnus.com>
582 * parse.c (write_dollar_variable): call new function
583 target_map_name_to_register to allow targets to define their own
584 register name aliases.
585 * infcmd.c (registers_info): use target_map_name_to_register so that
586 "print $reg" and "info reg $reg" use the same register name aliases.
588 Fri Feb 13 16:40:30 1998 Stan Shebs <shebs@andros.cygnus.com>
590 * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
591 * config/i386/xm-i386mk.h: Fix an include.
592 * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
594 Thu Feb 12 16:12:07 1998 Frank Ch. Eigler <fche@cygnus.com>
596 * remote-mips.c (mips_enter_debug): Sleep before sending CR to
598 (mips_exit_debug): Accept any whitespace / verbiage before monitor
601 Thu Feb 12 18:25:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
603 * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
606 Thu Feb 12 17:10:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
608 * valops.c (value_at): For d10v, make read pointers with
609 read_target_unsigned_integer, keep addresses unsigned.
610 (value_fetch_lazy): Ditto.
612 Thu Feb 12 12:14:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
614 * remote-d10v.c: New file. Layer the d10v GDB->remote memory map
615 on top of the remote serial memory transfer functions.
617 * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
619 * Makefile.in (remote-d10v.o): Add dependencies.
621 * remote.c (remote_open_1): Add arg extended_p, engage extended
622 protocol when extended_p.
623 (remote_open, extended_remote_open): Pass !extended_p /
624 extended_p to remote_open_1.
626 * remote.c (open_remote_target), target.h: New function.
628 Wed Feb 11 08:41:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
630 * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
632 Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com>
634 * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
636 Remove static declaration of free_actions.
638 * tracepoint.h: Add declaration of free_actions.
640 Tue Feb 10 12:17:13 1998 Fred Fish <fnf@cygnus.com>
642 * symtab.c (decode_line_1): Revert change that mistakenly
643 removed assignment of sals[0].pc field.
645 Mon Feb 10 12:37:47 1998 Philippe De Muyter <phdm@macqel.be>
647 * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
648 `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
649 `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
650 (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
651 is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
652 (FRAME_NUM_ARGS): New macro.
653 * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
654 * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
657 Mon Feb 9 11:10:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
659 * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
660 D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
662 * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
663 (DMEM_START): Move to 0x00......
664 (STACK_START): Move to 0x00..7ffe.
665 (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
667 * d10v-tdep.c (d10v_xlate_addr): Delete function.
669 Mon Feb 9 15:10:21 1998 Fred Fish <fnf@cygnus.com>
671 * symtab.c (fixup_psymbol_section): Move forward declaration to
672 top of file with other such decls. Make it a static function.
673 * symtab.h: Minor formatting tweaks.
675 Mon Feb 9 13:14:12 1998 Stan Shebs <shebs@andros.cygnus.com>
677 * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
679 * config/i960/tm-i960.h (BREAKPOINT): Define.
681 Mon Feb 9 15:35:38 1998 Ian Lance Taylor <ian@cygnus.com>
683 * Makefile.in (init.c): Ignore errors when making init.c. Seems
684 necessary to work around bug in Solaris make.
686 Sun Feb 6 02:44:28 1997 Philippe De Muyter <phdm@macqel.be>
688 * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
689 (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
690 (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
691 because floating-point values return via %fp0.
692 (CLEAR_INSN_CACHE): New macro.
693 * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
695 (REGISTER_CONVERT_TO_RAW): Ditto.
696 * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
697 call it after having written in child process's memory.
698 * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
699 (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
701 Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com)
703 * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
705 (TARGET_LONG_LONG_BIT): Likewise.
706 (TARGET_PTR_BIT): Likewise.
708 * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits.
712 Fri Feb 6 14:33:34 1998 Doug Evans <devans@canuck.cygnus.com>
714 * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
715 * config/mips/txvu.mt (SIM): txvu -> mips.
718 Fri Feb 6 17:42:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
720 * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
721 D10V_CONVERT_DADDR_TO_RAW): Define.
723 * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in
724 registers, regardless of their size, when they fit.
726 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
728 * d10v-tdep.c (d10v_extract_return_value): For function pointers
729 translate address to IMAP area.
731 * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
733 (POP_FRAME): Point at generic_pop_current_frame.
735 * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
737 (d10v_push_return_address): New function.
738 (d10v_pop_dummy_frame): Delete.
739 (d10v_fix_call_dummy): Delete.
740 (d10v_call_dummy_address): Delete.
742 * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
745 * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
747 * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
748 address of structure from first ARG1_REGNUM.
750 * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
751 even-odd register pair. Store 1 and 2 byte args in registers.
753 * valops.c (value_fetch_lazy): Ensure that a D10V function pointer
754 is fetched in the correct byte order.
755 (value_at): Ditto. Also ensure data pointers are mapped to data
758 * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P):
760 * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
761 (d10v_pop_frame): Replace R13 with LR_REGNUM.
762 (d10v_push_arguments): Replace R2 with ARG1_REGNUM.
763 (d10v_push_arguments): Replace 6 with ARGN_REGNUM.
764 (d10v_extract_return_value): Access return value with RET1_REGNUM.
766 * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
768 (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
769 (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
772 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
774 * blockframe.c (generic_pop_dummy_frame): Flush the frame, no
777 * blockframe.c (generic_pop_current_frame), frames.h: New
780 Thu Feb 5 17:18:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
782 * remote-sim.c (gdbsim_create_inferior): clear_proceed_status
783 before /re/starting the simulator.
785 Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com)
787 * top.c (do_nothing): Remove signal handler after signal is caught.
789 Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
791 * tracepoint.c (tracepoint_operation): call free_actions instead
792 of free. (free_actions): eliminate some memory leaks for actions.
793 (validate_actionline): pass string arg by reference, so we can
794 change the pointer. Change all memrange collection arguments to
795 canonical form (literal address and size), to enforce early
796 evaluation. Accept UNOP_MEMVAL (assembly variables) for
797 trace collection. (parse_and_eval_memrange): accept expressions
798 for the address and size fields of a memrange (and evaluate
799 them immediately). (several places): use -1 instead of zero
800 to distinguish an absolute memrange from a register-relative one.
801 (encode_actions): add handling for UNOP_MEMVAL (assembly variable).
803 Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com)
805 * Makefile.in (SFILES): add tracepoint.c.
806 (LINTFILES): add @CONFIG_SRCS@.
808 * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
809 * configure: Regenerated.
811 Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com)
813 * infptrace.c (child_resume): Don't try to step if
814 NO_SINGLE_STEP is defined.
816 Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com)
818 * Makefile.in (VERSION): Bump to 4.16.2.
820 Mon Feb 2 17:18:25 1998 Richard Henderson <rth@cygnus.com>
822 * alpha-nat.c (fetch_aout_core_registers): Rename from
823 fetch_core_registers.
824 (fetch_elf_core_registers): New function.
825 (supply_gregset): Use ALPHA_REGSET_BASE.
826 (supply_fpregset): Likewise.
827 (fill_fpregset): Likewise.
828 (alpha_aout_core_fns): Rename from alpha_core_fns.
829 (alpha_elf_core_fns): New.
830 * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
832 * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
833 (TARGET_ELF64): Likewise.
834 (ALPHA_REGSET_BASE): New.
835 * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
836 * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
838 * solib.c (elf_locate_base): Add TARGET_ELF64 support.
839 (info_sharedlibary_command): Likewise.
841 * configure.host: Match alpha*.
842 * configure.tgt: Likewise.
844 Fri Jan 30 15:11:38 1998 David Taylor <taylor@texas.cygnus.com>
846 Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
847 * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
848 whether we are in the dynamic symbol resolution code
849 (wait_for_inferior): invoke it.
850 * solib.c (in_svr4_dynsym_resolve_code): new function
851 (enable_break): record start and end of the dynamic linker
852 text and plt sections for use in in_svr4_dynsym_resolve_code.
853 * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
854 (in_svr4_dynsym_resolve_code): declare it.
855 * config/nm-gnu.h (solib.h): move inclusion to after definition
857 * config/nm-sysv4.h (solib.h): ditto.
858 * config/i386/nm-i386sco5.h (solib.h): ditto.
859 * config/i386/nm-linux.h (solib.h): ditto.
860 * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
862 Thu Jan 29 19:39:31 1998 Stan Shebs <shebs@andros.cygnus.com>
864 * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
866 * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
867 Remove, no longer needed.
868 * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
869 * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
870 * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
871 * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
873 Wed Jan 28 14:46:52 1998 Stan Shebs <shebs@andros.cygnus.com>
875 Suggested by Chris Walter <walter@budoe.bu.edu>:
876 * dwarfread.c (set_cu_language): Recognize Fortran.
877 * dwarf2read.c (set_cu_language): Ditto.
878 (read_array_type): Fix language test.
880 Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
882 * blockframe.c (generic_frame_chain_valid): A frame pointer may
883 be valid if it is equal to the frame pointer of its caller (ie.
884 not necessarily strictly INNER_THAN). Allows frameless functions.
886 Wed Jan 28 11:23:25 1998 Mark Alexander <marka@cygnus.com>
888 * monitor.c (monitor_vsprintf): New function to handle
889 printing of large addresses using %A format specifier.
890 (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
892 * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
895 Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com)
897 * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
900 Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com)
902 * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
903 Add closing parenthesis. From HJ Lu.
905 Mon Jan 26 17:54:45 1998 Mark Alexander <marka@cygnus.com>
907 * dve3900-rom.c: Improve performance by using memory commands
908 that print less fluff. Minor cosmetic changes.
909 Eliminate compiler warnings.
911 Sat Jan 24 23:44:43 1998 Martin M. Hunt <hunt@cygnus.com>
913 * breakpoint.c (enable_breakpoint): Preserve breakpoint
914 disposition when enabling a breakpoint.
916 * symtab.c (find_pc_sect_line): If no symbol information
917 is found, return correct pc anyway.
919 Fri Jan 23 17:26:22 1998 Stan Shebs <shebs@andros.cygnus.com>
921 * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
922 ns32k-*-mach3*): Fix file names.
923 (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
924 recognition, no source files for these.
925 * configure.tgt (powerpc-*-aix4*): Remove config, now identical
927 * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
930 Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com>
932 * monitor.c (monitor_write, monitor_readchar): New functions.
933 * monitor.h (monitor_write, monitor_readchar): Declare.
934 * dve3900-rom.c: Add support for fast loading on ethernet connections.
936 Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
938 * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
939 (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
940 (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
941 (d10v_write_fp, d10v_read_fp): Add prototypes.
942 * symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
943 * symfile.c (simple_overlay_update, simple_overlay_update_1):
944 Ignore the size of overlay sections. This check is redundant anyway.
945 * printcmd.c (print_frame_args): Ditto.
946 * valops.c (value_fetch_lazy): Ditto.
947 * values.c (unpack_long): Ditto.
948 * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
949 d10v_init_extra_frame_info): Fix some minor bugs so the finish command
951 (show_regs): Change num1 and num2 types from "long long" to "LONGEST".
952 (d10v_read_fp, d10v_write_fp): New functions.
953 (d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
954 (d10v_push_arguments): Fix for pointers and structs.
955 (d10v_extract_return_value): Fix for pointers and chars.
957 Tue Jan 20 18:53:18 1998 Stan Shebs <shebs@andros.cygnus.com>
959 * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
960 recognition, no source files for these (note that the i386 Mach
961 config is for pre-Mach 3).
962 (mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
963 * config/mips/mipsel64.mt: Remove, never referenced.
965 Mon Jan 19 14:01:28 1998 Stan Shebs <shebs@andros.cygnus.com>
967 * top.c (print_gdb_version): Restore to original message.
969 Mon Jan 19 13:34:40 1998 Ian Lance Taylor <ian@cygnus.com>
971 From cgf@bbc.com (Chris Faylor):
972 * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
974 (child_kill_inferior): Respond to all debug events as the child is
977 * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
978 (uninstall): Add $(EXEEXT) to file name to remove.
979 (gdb$(EXEEXT)): Rename target from plain gdb.
980 (gdb1$(EXEEXT)): Rename target from plain gdb1.
981 (clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
983 1998-01-16 Felix Lee <flee@cygnus.com>
985 * top.c (print_gdb_version): delete stutter.
987 Thu Jan 15 12:29:13 1998 Nick Clifton <nickc@cygnus.com>
989 * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
990 to prevent spurous error messages on non-ICE targets.
992 Wed Jan 14 19:27:02 1998 Stan Shebs <shebs@andros.cygnus.com>
994 * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
995 Remove, no longer used.
998 Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
1000 Patch from Jim Wilson.
1001 * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
1002 declare void function before use.
1004 * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
1007 Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
1009 * configure.in (--with-mmalloc): Add new configure arg to use the
1010 mmalloc package. Default is to not use it.
1011 (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
1013 * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
1014 * configure: Regenerated.
1015 * config.in: Regenerated.
1016 * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
1017 (MMALLOC): Set using configure.
1018 (MMALLOC_CFLAGS): Set using configure.
1020 * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
1021 than just defining it.
1022 * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
1023 * utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
1024 * objfiles.c: ditto.
1027 * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
1028 * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
1029 * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
1030 * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
1031 * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
1032 * gdbserver/Makefile.in (MMALLOC_*): Remove.
1033 * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1034 * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1035 * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1036 * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1037 * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1038 * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1039 * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1040 * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1041 * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
1042 * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1043 * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1044 * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1045 * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1046 * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1048 Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1050 * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
1051 default to void pointer type (so that their default radix is hex).
1053 * symtab.c: move rbreak_command from no_class to class_breakpoint
1054 so it will be listed under "help breakpoints".
1056 Sat Jan 10 14:58:04 1998 Stan Shebs <shebs@andros.cygnus.com>
1058 * rdi-share/hostchan.c: Remove gettimeofday declaration.
1060 Thu Jan 8 11:03:59 1998 Nick Clifton <nickc@cygnus.com>
1062 * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
1063 to implement the Angel remote debugging interface.
1065 * Makefile.in: Add build rules for remote-rdi.c and
1066 rdi-share/libangsd.a.
1068 * configure.tgt: Updated from source on branch.
1069 * config/arm/tm-arm.h: Updated from source on branch.
1070 * arm-tdep.c: Updated from source on branch.
1072 * rdi-share: New directory, RDI library contributed by ARM.
1074 Mon Jan 5 20:21:59 1998 Mark Alexander <marka@cygnus.com>
1076 * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
1077 * monitor.c (monitor_wait): Echo program output.
1078 * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
1079 add MO_PRINT_PROGRAM_OUTPUT flag.
1081 Mon Jan 5 18:21:11 1998 David Taylor <taylor@texas.cygnus.com>
1083 * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
1084 SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
1086 * top.c (return_to_top_level, catch_errors): use the new macros
1087 * main.c (SET_TOP_LEVEL): ditto.
1088 * config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
1090 Fri Jan 2 18:48:58 1998 Mark Alexander <marka@cygnus.com>
1092 * configure.in: Double up brackets in shell case pattern.
1094 Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1096 * tracepoint.c (finish_tfind_command): improved algorithm for
1097 deciding when we've "stepped" into a new stack frame.
1098 (map_args_over_tracepoints): loop over tracepoint list "safely",
1099 since list elements may be deleted during loop.
1100 (read_actions): add actions to history list.
1102 For older changes see ChangeLog-97
1108 version-control: never