1 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
3 * remote.c (remote_start_remote): Call remote_check_symbols even
4 if only symbol-file (not file) has been given.
6 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
8 * gdbarch.sh (skip_entrypoint): New callback.
9 * gdbarch.c, gdbarch.h: Regenerate.
10 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
11 * infrun.c (fill_in_stop_func): Likewise.
12 * ppc-linux-tdep.c: Include "elf/ppc64.h".
13 (ppc_elfv2_elf_make_msymbol_special): New function.
14 (ppc_elfv2_skip_entrypoint): Likewise.
15 (ppc_linux_init_abi): Install them for ELFv2.
17 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
19 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
20 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
21 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
22 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
23 structures returned in GPRs.
25 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
27 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
28 offset to the stack parameter list for the ELFv2 ABI.
30 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
32 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
33 set_gdbarch_convert_from_func_ptr_addr and
34 set_gdbarch_elf_make_msymbol_special for ELFv1.
35 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
36 function descriptors on ELFv1.
37 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
38 set up r12 at function entry.
40 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
42 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
43 (struct gdbarch_tdep): New member elf_abi.
45 * rs6000-tdep.c: Include "elf/ppc64.h".
46 (rs6000_gdbarch_init): Detect ELF ABI version.
48 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
50 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
51 within a register pair holding a DFP 128-bit value on little-endian.
52 (ppc64_sysv_abi_return_value_base): Likewise.
53 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
54 (dfp_pseudo_register_write): Likewise.
56 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
58 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
59 offset on little-endian when passing _Decimal32.
60 (ppc64_sysv_abi_return_value_base): Likewise for return values.
62 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
64 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
65 of the overlapped FP register within the VSX register on little-
67 (efpr_pseudo_register_write): Likewise.
69 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
71 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
72 offset on little-endian when passing small structures.
74 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
76 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
77 (struct ppc64_sysv_argpos): New data structure.
78 (ppc64_sysv_abi_push_float): Remove.
79 (ppc64_sysv_abi_push_val): New function.
80 (ppc64_sysv_abi_push_integer): Likewise.
81 (ppc64_sysv_abi_push_freg): Likewise.
82 (ppc64_sysv_abi_push_vreg): Likewise.
83 (ppc64_sysv_abi_push_param): Likewise.
84 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
85 (ppc64_sysv_abi_return_value_base): New function.
86 (ppc64_sysv_abi_return_value): Refactor to use it.
88 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
90 * NEWS: Document new target powerpc64le-*-linux*.
92 2014-02-04 Mark Kettenis <kettenis@gnu.org>
94 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
95 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
97 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
98 register set used in ELF core dumps. Add floating-point register set.
100 2014-02-03 Kevin Buettner <kevinb@redhat.com>
102 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
103 dwarf2_to_gdb[] table using symbolic constants. Adjust
104 penultimate entry from number representing the PC register
105 to symbolic constant representing the MDR register. Add
106 constant for the PC register to the end of the table.
108 2014-02-03 Mark Kettenis <kettenis@gnu.org>
110 * bsd-kvm.c: Include <sys/param.h>
112 2014-02-03 Mark Kettenis <kettenis@gnu.org>
114 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
116 2014-01-31 Joel Brobecker <brobecker@adacore.com>
118 * ada-lang.h (clear_ada_sym_cache): Delete.
120 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
122 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
124 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
126 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
127 the sigreturn register save area only if the syscall is
130 2014-01-29 Joel Brobecker <brobecker@adacore.com>
132 * valops.c (value_slice): Minor reformatting.
134 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
136 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
138 2014-01-28 Joel Brobecker <brobecker@adacore.com>
140 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
142 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
143 (ada_ignore_descriptive_types_p): New static global.
144 (find_parallel_type_by_descriptive_type): Return immediately
145 if ada_ignore_descriptive_types_p is set.
146 (_initialize_ada_language): Register new commands "maintenance
147 set ada", "maintenance show ada", "maintenance set ada
148 ignore-descriptive-types" and "maintenance show ada
149 ignore-descriptive-types".
150 * NEWS: Add entry for new "maint ada set/show
151 ignore-descriptive-types" commands.
153 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
155 * record-btrace.c (record_btrace_close): Call btrace_teardown
158 2014-01-27 Joel Brobecker <brobecker@adacore.com>
160 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
163 2014-01-27 Joel Brobecker <brobecker@adacore.com>
165 * ada-typeprint (type_is_full_subrange_of_target_type):
167 (print_range): Add parameter bounds_prefered_p. If not set,
168 try printing range types using the name of their base type.
169 (print_range_type): Add parameter bounds_prefered_p.
170 Use it in call to print_range.
171 (print_array_type, ada_print_type): Update calls to print_range
172 and print_range_type.
174 2014-01-27 Joel Brobecker <brobecker@adacore.com>
176 * ada-typeprint.c (print_array_type, print_choices, print_range)
177 (print_range_bound, print_dynamic_range_bound, print_range_type):
180 2014-01-27 Joel Brobecker <brobecker@adacore.com>
182 * ada-typeprint.c (print_range): Add missing empty line
183 after local declaration.
185 2014-01-27 Joel Brobecker <brobecker@adacore.com>
187 * ada-valprint.c (print_optional_low_bound): Get index_type's
188 target type for as long as it is a TYPE_CODE_RANGE.
190 2014-01-27 Joel Brobecker <brobecker@adacore.com>
192 * procfs.c (procfs_make_note_section): Remove assertion and
195 2014-01-24 Yao Qi <yao@codesourcery.com>
197 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
198 * corelow.c (get_core_siginfo): Likewise.
200 2014-01-24 Yao Qi <yao@codesourcery.com>
202 * remote.c (remote_write_bytes_aux): Change type of 'len' to
203 ULONGEST. Don't check 'len' is negative.
204 (remote_write_bytes): Change type of 'len' to ULONGEST.
206 2014-01-23 Tom Tromey <tromey@redhat.com>
209 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
210 Handle exception from frame.block.
211 (FrameVars.fetch_frame_locals): Likewise.
213 2014-01-23 Tom Tromey <tromey@redhat.com>
216 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
217 on a NULL pointer. Move "goto error" to correct place.
219 2014-01-23 Tom Tromey <tromey@redhat.com>
222 * python/py-framefilter.c (apply_frame_filter): Call
223 ensure_python_env after computing gdbarch.
225 2014-01-23 Yao Qi <yao@codesourcery.com>
227 * target.c (raw_memory_xfer_partial): Change argument type
228 from void * to gdb_byte *.
229 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
231 2014-01-22 Doug Evans <dje@google.com>
233 New gdbserver option --debug-format=timestamp.
236 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
238 * syscalls/s390x-linux.xml: New file.
239 * syscalls/s390-linux.xml: New file.
240 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
241 (XML_SYSCALL_FILENAME_S390X): Likewise.
242 (op_svc): New enum value for SVC opcode.
243 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
244 (s390_linux_get_syscall_number): New function.
245 (s390_gdbarch_init): Register '*get_syscall_number' and the
246 syscall xml file name.
247 * data-directory/Makefile.in (SYSCALLS_FILES): Add
248 "s390-linux.xml" and "s390x-linux.xml".
249 * NEWS: Announce new feature.
251 2014-01-22 Baruch Siach <baruch@tkos.co.il>
253 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
255 2014-01-22 Pedro Alves <palves@redhat.com>
257 * xtensa-config.c: Include defs.h.
259 2014-01-22 Joel Brobecker <brobecker@adacore.com>
261 * common/common-utils.h: Add "ARI:" comment beside __func__
264 2014-01-22 Joel Brobecker <brobecker@adacore.com>
266 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
269 2014-01-21 Roland McGrath <mcgrathr@google.com>
271 * configure.ac: Call AM_PROG_INSTALL_STRIP.
272 * configure: Regenerate.
273 * aclocal.m4: Regenerate.
274 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
275 New substituted variables.
276 (install-strip): New target.
277 (INSTALL_SCRIPT): New substituted variable.
278 (FLAGS_TO_PASS): Add it.
279 (install-only): Use $(INSTALL_SCRIPT) rather than
280 $(INSTALL_PROGRAM) for gcore.
282 2014-01-20 Tom Tromey <tromey@redhat.com>
284 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
287 2014-01-20 Tom Tromey <tromey@redhat.com>
289 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
290 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
291 (deprecated_cmd_warning, complete_on_cmdlist): Update.
292 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
293 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
294 (struct cmd_list_element) <flags>: Remove.
295 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
296 doc_allocated>: New fields.
297 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
299 * maint.c (maintenance_do_deprecate): Update.
300 * top.c (execute_command): Update.
302 2014-01-20 Baruch Siach <baruch@tkos.co.il>
304 * xtensa-linux-nat.c: Include asm/ptrace.h.
306 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
308 * Makefile.in (SFILES): Add d-support.c.
309 (COMMON_OBS): Add d-support.o.
310 * d-lang.h (d_parse_symbol): Add comment, now defined in
312 * d-lang.c (parse_call_convention)
313 (parse_attributes, parse_function_types)
314 (parse_function_args, parse_type, parse_identifier)
315 (call_convention_p, d_parse_symbol): Move functions to ...
316 * d-support.c: ... New file.
318 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
320 * d-lang.h (d_parse_symbol): Add declaration.
321 * d-lang.c (extract_identifiers)
322 (extract_type_info): Remove functions.
323 (parse_call_convention, parse_attributes)
324 (parse_function_types, parse_function_args)
325 (parse_type, parse_identifier, call_convention_p)
326 (d_parse_symbol): New functions.
327 (d_demangle): Use d_parse_symbol to demangle D symbols.
329 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
331 * d-lang.h (struct builtin_d_type): New data type.
332 (builtin_d_type): Add declaration.
333 * d-lang.c (d_language_arch_info, build_d_types)
334 (builtin_d_type): New functions.
335 (enum d_primitive_types): New data type.
336 (d_language_defn): Change c_language_arch_info to
337 d_language_arch_info.
338 (d_type_data): New static variable.
339 (_initialize_d_language): Initialize d_type_data.
341 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
343 * d-lang.h (d_main_name): Add declaration.
344 * d-lang.c (d_main_name): New function.
345 * symtab.c (find_main_name): Add call to d_main_name.
347 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
349 * d-lang.c (d_language_defn): Change macro_expansion_c to
352 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
354 * MAINTAINERS: Add myself as a write-after-approval maintainer.
356 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
358 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
359 gdb_exception" declaration.
360 * remote.c (getpkt_or_notif_sane): Likewise.
362 2014-01-17 Doug Evans <dje@google.com>
364 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
365 function, contents of dirnames_to_char_ptr_vec_append moved here.
366 (delim_string_to_char_ptr_vec): New function.
367 (dirnames_to_char_ptr_vec_append): Rewrite.
368 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
370 2014-01-17 Doug Evans <dje@google.com>
372 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
374 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
375 #include "common-utils.h".
376 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
377 * common/vec.h (VEC_ASSERT_PASS): Update.
378 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
379 (MACH_CHECK_ERROR): Update.
381 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
383 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
385 * gdbarch.h: Regenerate.
387 2014-01-16 Tom Tromey <tromey@redhat.com>
389 * value.c (struct value) <regnum>: Move earlier.
391 2014-01-16 Tom Tromey <tromey@redhat.com>
393 * remote.c (extended_remote_create_inferior): Rename from
394 extended_remote_create_inferior_1. Add "ops" argument. Remove
397 2014-01-16 Pedro Alves <palves@redhat.com>
399 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
400 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
403 2014-01-16 Doug Evans <dje@google.com>
405 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
407 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
409 * btrace.h (btrace_thread_flag): New.
410 (struct btrace_thread_info) <flags>: New.
411 * record-btrace.c (record_btrace_resume_thread)
412 (record_btrace_find_thread_to_move, btrace_step_no_history)
413 (btrace_step_stopped, record_btrace_start_replaying)
414 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
415 (record_btrace_find_resume_thread): New.
416 (record_btrace_resume, record_btrace_wait): Extend.
417 (record_btrace_can_execute_reverse): New.
418 (record_btrace_open): Fail in non-stop mode.
419 (record_btrace_set_replay): Split into this, ...
420 (record_btrace_stop_replaying): ... this, ...
421 (record_btrace_clear_histories): ... and this.
422 (init_record_btrace_ops): Init to_can_execute_reverse.
425 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
427 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
428 (forward_target_decr_pc_after_break)
429 (target_decr_pc_after_break): New.
430 * target.c (forward_target_decr_pc_after_break)
431 (target_decr_pc_after_break): New.
432 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
433 instead of gdbarch_decr_pc_after_break.
434 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
435 instead of gdbarch_decr_pc_after_break.
436 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
437 instead of gdbarch_decr_pc_after_break.
438 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
439 instead of gdbarch_decr_pc_after_break.
440 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
441 instead of gdbarch_decr_pc_after_break.
442 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
443 instead of gdbarch_decr_pc_after_break.
445 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
447 * btrace.c: Include regcache.h.
448 (btrace_add_pc): New.
449 (btrace_enable): Call btrace_add_pc.
450 (btrace_is_empty): New.
451 * btrace.h (btrace_is_empty): New.
452 * record-btrace.c (require_btrace, record_btrace_info): Call
455 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
457 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
459 (linux_disable_btrace): Change return type.
460 * common/linux-btrace.h (linux_read_btrace): Change parameters
461 and return type to allow error reporting. Update users.
462 (linux_disable_btrace): Change return type. Update users.
463 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
466 (btrace_block) <begin>: Comment on BEGIN == 0.
467 * btrace.c (btrace_compute_ftrace): Start from the end of
469 (btrace_stitch_trace, btrace_clear_history): New.
470 (btrace_fetch): Read delta trace, return if replaying.
471 (btrace_clear): Move clear history code to btrace_clear_history.
472 (parse_xml_btrace): Throw an error if parsing failed.
473 * target.h (struct target_ops) <to_read_btrace>: Change parameters
474 and return type to allow error reporting.
475 (target_read_btrace): Change parameters and return type to allow
477 * target.c (target_read_btrace): Update.
478 * remote.c (remote_read_btrace): Support delta reads. Pass
482 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
484 * record.h (record_btrace_frame_unwind)
485 (record_btrace_tailcall_frame_unwind): New declarations.
486 * dwarf2-frame: Include record.h
487 (dwarf2_frame_cfa): Throw an error for btrace frames.
488 * record-btrace.c: Include hashtab.h.
489 (btrace_get_bfun_name): New.
490 (btrace_call_history): Call btrace_get_bfun_name.
491 (struct btrace_frame_cache): New.
493 (bfcache_hash, bfcache_eq, bfcache_new): New.
494 (btrace_get_frame_function): New.
495 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
496 (record_btrace_frame_this_id): Compute own id.
497 (record_btrace_frame_prev_register): Provide PC, throw_error
498 for all other registers.
499 (record_btrace_frame_sniffer): Detect btrace frames.
500 (record_btrace_tailcall_frame_sniffer): New.
501 (record_btrace_frame_dealloc_cache): New.
502 (record_btrace_frame_unwind): Add new functions.
503 (record_btrace_tailcall_frame_unwind): New.
504 (_initialize_record_btrace): Allocate cache.
505 * btrace.c (btrace_clear): Call reinit_frame_cache.
508 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
510 * record-btrace.c (record_btrace_set_replay)
511 (record_btrace_goto_begin, record_btrace_goto_end)
512 (record_btrace_goto): New.
513 (init_record_btrace_ops): Initialize them.
516 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
518 * record-btrace.c (record_btrace_find_new_threads)
519 (record_btrace_thread_alive): New.
520 (init_record_btrace_ops): Initialize to_find_new_threads and
523 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
525 * record-btrace.c (record_btrace_resume): New.
526 (record_btrace_wait): New.
527 (init_record_btrace_ops): Initialize to_wait and to_resume.
529 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
531 * record-btrace.c (record_btrace_xfer_partial)
532 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
533 (record_btrace_allow_memory_access): New.
534 (init_record_btrace_ops): Initialize new methods.
535 * target.c (raw_memory_xfer_partial): Bail out if target reports
536 that this memory is not available.
538 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
540 * target.h (target_ops) <to_insert_breakpoint>
541 <to_remove_breakpoint>: Add target_ops parameter.
542 (forward_target_insert_breakpoint): New.
543 (forward_target_remove_breakpoint): New.
544 (memory_remove_breakpoint, memory_insert_breakpoint):
545 Add target_ops parameter.
546 * target.c (target_insert_breakpoint): Split into this and ...
547 (forward_target_insert_breakpoint): ... this.
548 (target_remove_breakpoint): Split into this and ...
549 (forward_target_remove_breakpoint): ... this.
550 (debug_to_insert_breakpoint): Add target_ops parameter.
551 Call forward_target_insert_breakpoint.
552 (debug_to_remove_breakpoint): Add target_ops parameter.
553 Call forward_target_remove_breakpoint.
554 (update_current_target): Do not inherit or default to_insert_breakpoint
555 and to_remove_breakpoint.
556 * corelow.c (ignore): Add target_ops parameter.
557 * exec.c (ignore): Add target_ops parameter.
558 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
559 Add target_ops parameter.
560 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
561 Add target_ops parameter.
562 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
563 Add target_ops parameter.
564 * record-full.c (record_full_beneath_to_insert_breakpoint)
565 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
566 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
567 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
568 (record_full_core_remove_breakpoint): Add target_ops parameter.
570 (record_full_beneath_to_insert_breakpoint_ops)
571 (record_full_beneath_to_remove_breakpoint_ops)
572 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
573 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
574 tmp_to_remove_breakpoint_ops,
575 record_full_beneath_to_insert_breakpoint_ops, and
576 record_full_beneath_to_remove_breakpoint_ops.
577 * remote-m32r-sdi.c (m32r_insert_breakpoint)
578 (m32r_remove_breakpoint): Add target_ops parameter.
579 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
580 Add target_ops parameter.
581 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
582 Add target_ops parameter.
584 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
585 Markus Metzger <markus.t.metzger@intel.com>
587 * record-btrace.c: Include frame-unwind.h.
588 (record_btrace_frame_unwind_stop_reason)
589 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
590 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
592 (init_record_btrace_ops): Install it.
594 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
596 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
599 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
601 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
604 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
606 * frame-unwind.c: Include target.h.
607 (frame_unwind_try_unwinder): New function with code from ...
608 (frame_unwind_find_by_frame): ... here. New variable
609 unwinder_from_target, call also target_get_unwinder)
610 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
611 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
612 * target.h (struct target_ops): New fields to_get_unwinder and
613 to_get_tailcall_unwinder.
614 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
616 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
618 * record-btrace.c (record_btrace_fetch_registers)
619 (record_btrace_store_registers)
620 (record_btrace_to_prepare_to_store): New.
621 (init_record_btrace_ops): Add the above.
623 2014-01-16 Tom Tromey <tromey@redhat.com>
625 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
626 * target.h (struct target_ops) <to_prepare_to_store>: Add
628 (target_prepare_to_store): Add argument.
629 * target.c (debug_to_prepare_to_store): Add argument.
630 (update_current_target): Update.
631 * remote.c (remote_prepare_to_store): Add 'self' argument.
632 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
633 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
634 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
635 * record-full.c (record_full_core_prepare_to_store): Add 'self'
637 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
638 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
639 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
640 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
641 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
643 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
645 * btrace.h (replay) <replay>: New.
646 (btrace_is_replaying): New.
647 * btrace.c (btrace_clear): Free replay iterator.
648 (btrace_is_replaying): New.
649 * record-btrace.c (record_btrace_is_replaying): New.
650 (record_btrace_info): Print insn number if replaying.
651 (record_btrace_insn_history): Start at replay position.
652 (record_btrace_call_history): Start at replay position.
653 (init_record_btrace_ops): Init to_record_is_replaying.
655 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
657 * record-btrace.c (record_btrace_insn_history_range): Include
659 (record_btrace_insn_history_from): Adjust range.
660 (record_btrace_call_history_range): Include
662 (record_btrace_call_history_from): Adjust range.
663 * NEWS: Announce changes.
665 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
667 * record.h (enum record_print_flag)
668 <record_print_indent_calls>: New.
669 * record.c (get_call_history_modifiers): Recognize /c modifier.
670 (_initialize_record): Document /c modifier.
671 * record-btrace.c (btrace_call_history): Add btinfo parameter.
672 Reorder fields. Optionally indent the function name. Update
674 * NEWS: Announce changes.
676 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
678 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
680 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
682 * btrace.c (ftrace_new_function): Start counting at one.
683 * record-btrace.c (record_btrace_info): Adjust number of calls
687 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
689 * record-btrace.c (btrace_call_history_insn_range): Print
690 insn range as [begin, end].
692 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
694 * btrace.h (struct btrace_func_link): New.
695 (enum btrace_function_flag): New.
696 (struct btrace_inst): Rename to ...
697 (struct btrace_insn): ...this. Update all users.
698 (struct btrace_func) <ibegin, iend>: Remove.
699 (struct btrace_func_link): New.
700 (struct btrace_func): Rename to ...
701 (struct btrace_function): ...this. Update all users.
702 (struct btrace_function) <segment, flow, up, insn, insn_offset)
703 (number, level, flags>: New.
704 (struct btrace_insn_iterator): Rename to ...
705 (struct btrace_insn_history): ...this.
707 (struct btrace_insn_iterator, btrace_call_iterator): New.
708 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
709 (struct btrace_target_info) <begin, end, level>
710 <insn_history, call_history>: New.
711 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
712 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
713 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
714 (btrace_call_number, btrace_call_begin, btrace_call_end)
715 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
716 (btrace_find_function_by_number, btrace_set_insn_history)
717 (btrace_set_call_history): New.
718 * btrace.c (btrace_init_insn_iterator)
719 (btrace_init_func_iterator, compute_itrace): Remove.
720 (ftrace_print_function_name, ftrace_print_filename)
721 (ftrace_skip_file): Change
723 (ftrace_init_func): Remove.
724 (ftrace_debug): Use new btrace_function fields.
725 (ftrace_function_switched): Also consider gaining and
726 losing symbol information).
727 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
728 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
729 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
731 (ftrace_new_function): Move. Remove debug print.
732 (ftrace_update_lines, ftrace_update_insns): New.
733 (ftrace_update_function): Check for call, ret, and jump.
734 (compute_ftrace): Renamed to ...
735 (btrace_compute_ftrace): ...this. Rewritten to compute call
737 (btrace_fetch, btrace_clear): Updated.
738 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
739 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
740 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
741 (btrace_call_number, btrace_call_begin, btrace_call_end)
742 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
743 (btrace_find_function_by_number, btrace_set_insn_history)
744 (btrace_set_call_history): New.
745 * record-btrace.c (require_btrace): Use new btrace thread
747 (record_btrace_info, btrace_insn_history)
748 (record_btrace_insn_history, record_btrace_insn_history_range):
749 Use new btrace thread info fields and new iterator.
750 (btrace_func_history_src_line): Rename to ...
751 (btrace_call_history_src_line): ...this. Use new btrace
753 (btrace_func_history): Rename to ...
754 (btrace_call_history): ...this. Use new btrace thread info
755 fields and new iterator.
756 (record_btrace_call_history, record_btrace_call_history_range):
757 Use new btrace thread info fields and new iterator.
759 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
761 * frame.h (frame_id_build_unavailable_stack_special): New.
762 * frame.c (frame_id_build_unavailable_stack_special): New.
764 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
766 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
767 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
768 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
770 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
771 (i386_insn_is_jump, i386_jmp_p): New.
772 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
773 insn_is_jump to gdbarch.
774 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
775 * gdbarch.h: Regenerated.
776 * gdbarch.c: Regenerated.
777 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
778 (default_insn_is_jump): New.
779 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
780 (default_insn_is_jump): New.
782 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
784 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
786 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
787 (btrace_read_type) <btrace_read_new>: Change to ...
788 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
790 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
792 * common/linux-btrace.c (linux_read_btrace): Free trace from
795 2014-01-15 Doug Evans <dje@google.com>
797 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
800 2014-01-15 Tom Tromey <tromey@redhat.com>
802 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
803 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
804 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
805 (set_objfile_main_name): New function.
806 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
807 language_of_main>: New fields.
808 (set_objfile_main_name): Declare.
809 * symtab.c (find_main_name): Loop over objfiles to find the main
811 (set_main_name): Now static.
812 (get_main_info): Add comment.
813 * symtab.h (set_main_name): Don't declare.
815 2014-01-15 Tom Tromey <tromey@redhat.com>
817 * symtab.c (main_progspace_key): New global.
818 (struct main_info): New.
819 (name_of_main, language_of_main): Remove.
820 (get_main_info, main_info_cleanup): New function.
821 (set_main_name, main_name, main_language): Use get_main_info.
822 (_initialize_symtab): Initialize main_progspace_key.
824 2014-01-15 Tom Tromey <tromey@redhat.com>
826 * dbxread.c (process_one_symbol): Update.
827 * dwarf2read.c (read_partial_die): Update.
828 * symfile.c (set_initial_language): Call main_language.
829 * symtab.c (language_of_main): Now static.
830 (set_main_name): Add 'lang' parameter.
831 (find_main_name): Update.
832 (main_language): New function.
833 (symtab_observer_executable_changed): Update.
834 * symtab.h (set_main_name): Update.
835 (language_of_main): Remove.
836 (main_language): Declare.
838 2014-01-15 Tom Tromey <tromey@redhat.com>
840 * symfile.c (init_entry_point_info): Use new "initialized" field.
842 * objfiles.h (struct entry_point) <initialized>: New field.
843 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
844 (struct objfile) <ei>: ...here. Remove.
845 * objfiles.c (entry_point_address_query): Update.
847 2014-01-15 Tom Tromey <tromey@redhat.com>
849 * objfiles.c (entry_point_address_query): Relocate entry point
851 (objfile_relocate1): Do not relocate entry point address.
852 * objfiles.h (struct entry_info) <entry_point>: Update comment.
853 <the_bfd_section_index>: New field.
854 * symfile.c (init_entry_point_info): Find the entry point's
857 2014-01-15 Tom Tromey <tromey@redhat.com>
859 * solib-frv.c (enable_break): Use entry_point_address_query.
861 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
863 * NEWS: Add note on improved process record-replay on
866 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
868 * arm-tdep.c (enum arm_record_result): New enum.
869 (arm_record_unsupported_insn): New function.
870 (arm_record_coproc_data_proc): Removed.
871 (thumb2_record_ld_st_multiple): New function.
872 (thumb2_record_ld_st_dual_ex_tbb): New function.
873 (thumb2_record_data_proc_sreg_mimm): New function.
874 (thumb2_record_ps_dest_generic): New function.
875 (thumb2_record_branch_misc_cntrl): New function.
876 (thumb2_record_str_single_data): New function.
877 (thumb2_record_ld_mem_hints): New function.
878 (thumb2_record_ld_word): New function.
879 (thumb2_record_lmul_lmla_div): New function.
880 (thumb2_record_decode_insn_handler): New function.
881 (decode_insn): Add thumb32 instruction handlers.
883 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
885 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
886 (struct arm_linux_record_tdep): Declare.
887 (arm_canonicalize_syscall): New function.
888 (arm_all_but_pc_registers_record): New function.
889 (arm_linux_syscall_record): New function.
890 (arm_linux_init_abi): Add syscall recording constructs.
891 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
892 decoding. (arm_record_coproc_data_proc): Update arm syscall
894 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
895 <arm_syscall_record>: New field.
896 * configure.tgt (arm*-*-linux*): Add linux-record.o to
899 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
901 * arm-tdep.c (thumb_record_misc): Update to use sp as base
902 register for push instruction recording.
904 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
906 * arm-tdep.c (thumb_record_misc): Update to correct logical
907 error while recording ldm, ldmia and pop instructions.
909 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
911 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
913 2014-01-15 Pedro Alves <palves@redhat.com>
915 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
916 (go32_resume, go32_fetch_registers, store_register)
917 (go32_store_registers, go32_prepare_to_store)
918 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
919 (go32_create_inferior, go32_can_run, go32_terminal_init)
920 (go32_terminal_inferior, go32_terminal_ours): Delete forward
923 2014-01-15 Tom Tromey <tromey@redhat.com>
925 * target.h (async_callback_ftype): New typedef.
926 (struct target_ops) <to_async>: Use it.
928 2014-01-15 Joel Brobecker <brobecker@adacore.com>
930 * python/py-value.c (get_field_type): Remove unnecessary curly
931 braces for single-statement if block.
933 2014-01-15 Joel Brobecker <brobecker@adacore.com>
935 * python/py-type.c (convert_field): Add missing empty line
938 2014-01-14 Doug Evans <dje@google.com>
940 * symfile.h (expand_symtabs_matching): Renamed from
941 expand_partial_symbol_names. Update prototype.
942 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
943 * symfile.c (expand_symtabs_matching): Renamed from
944 expand_partial_symbol_names. New args file_matcher, kind.
945 Rename arg fun to symbol_matcher.
946 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
947 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
948 ada_expand_partial_symbol_name.
949 (ada_make_symbol_completion_list): Update to call
950 expand_symtabs_matching.
951 (ada_add_global_exceptions): Call expand_symtabs_matching.
952 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
953 call map_symbol_filenames.
954 * symtab.c (sources_info): Update to call map_symbol_filenames.
955 (search_symbols): Call expand_symtabs_matching.
956 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
957 (default_make_symbol_completion_list_break_on): Update to call
958 expand_symtabs_matching.
959 (make_source_files_completion_list): Update to call
960 map_symbol_filenames.
962 2014-01-14 Doug Evans <dje@google.com>
964 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
965 (expand_symtabs_symbol_matcher_ftype): New typedef.
966 (quick_symbol_functions.expand_symtabs_matching): Update to use.
967 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
968 * symfile.c (expand_partial_symbol_names): Update to use
969 expand_symtabs_symbol_matcher_ftype.
970 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
971 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
972 Arg name_matcher renamed to symbol_matcher.
973 * psymtab.c (recursively_search_psymtabs): Update to use
974 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
976 (expand_symtabs_matching_via_partial): Update to use
977 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
978 Arg name_matcher renamed to symbol_matcher.
980 2014-01-14 Doug Evans <dje@google.com>
982 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
983 (map_partial_symbol_filenames): Ditto.
984 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
985 (map_partial_symbol_filenames): Ditto.
986 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
987 (map_partial_symbol_filenames): Ditto.
988 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
989 (map_partial_symbol_filenames): Ditto.
990 * symtab.c: Delete #include "psymtab.h".
992 2014-01-14 Pedro Alves <palves@redhat.com>
993 Tom Tromey <tromey@redhat.com>
995 * infrun.c (use_displaced_stepping): Use find_record_target
996 instead of RECORD_IS_USED.
997 (adjust_pc_after_break): Use record_full_is_used instead of
999 * record-btrace.c (record_btrace_open): Call record_preopen
1000 instead of checking RECORD_IS_USED.
1001 * record-full.c (record_full_shortname)
1002 (record_full_core_shortname): New globals.
1003 (record_full_is_used): New function.
1004 (find_full_open): Call record_preopen instead of checking
1006 (init_record_full_ops): Set the target's shortname to
1007 record_full_shortname.
1008 (init_record_full_core_ops): Set the target's shortname to
1009 record_full_core_shortname.
1010 * record-full.h (record_full_is_used): Declare.
1011 * record.c (find_record_target): Make extern.
1012 (record_preopen): New function.
1013 * record.h (RECORD_IS_USED): Delete macro.
1014 (find_record_target, record_preopen): Declare functions.
1016 2014-01-14 Yao Qi <yao@codesourcery.com>
1018 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1019 'len''s type to ULONGEST.
1020 (core_xfer_shared_libraries_aix): Likewise.
1021 * gdbarch.c, gdbarch.h: Regenerated.
1022 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1023 Change type of 'len' to ULONGEST.
1024 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1025 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1027 2014-01-14 Yao Qi <yao@codesourcery.com>
1029 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1030 type of 'len' to ULONGEST.
1031 (linux_xfer_osdata_processgroups): Likewise.
1032 (linux_xfer_osdata_threads): Likewise.
1033 (linux_xfer_osdata_fds): Likewise.
1034 (linux_xfer_osdata_isockets): Likewise.
1035 (linux_xfer_osdata_shm): Likewise.
1036 (linux_xfer_osdata_sem): Likewise.
1037 (linux_xfer_osdata_msg): Likewise.
1038 (linux_common_xfer_osdata): Likewise.
1039 (struct osdata_type) <getter>: Likewise.
1040 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1043 2014-01-14 Yao Qi <yao@codesourcery.com>
1045 * target.h (target_xfer_partial_ftype): Update.
1046 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1048 * aix-thread.c (aix_thread_xfer_partial): Change type of
1049 argument 'len' to ULONGEST.
1050 * auxv.c (procfs_xfer_auxv): Likewise.
1051 (ld_so_xfer_auxv): Likewise.
1052 (memory_xfer_auxv): Likewise.
1053 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1054 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1055 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1056 * corelow.c (core_xfer_partial): Likewise.
1057 * ctf.c (ctf_xfer_partial): Likewise.
1058 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1060 (darwin_read_dyld_info): Likewise.
1061 (darwin_xfer_partial): Likewise.
1062 * exec.c (section_table_xfer_memory_partial): Likewise.
1063 (exec_xfer_partial): Likewise.
1064 * exec.h (section_table_xfer_memory_partial): Update
1066 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1067 instead of plongest.
1068 (gnu_xfer_partial): Likewise.
1069 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1070 (ia64_hpux_xfer_solib_got): Likewise.
1071 (ia64_hpux_xfer_partial): Likewise.
1072 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1073 * inf-ptrace.c (inf_ptrace_xfer_partial):
1074 * inf-ttrace.c (inf_ttrace_xfer_partial):
1075 * linux-nat.c (linux_xfer_siginfo): Likewise.
1076 (linux_nat_xfer_partial): Likewise.
1077 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1078 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1079 * monitor.c (monitor_xfer_memory): Likewise.
1080 (monitor_xfer_partial): Likewise.
1081 * procfs.c (procfs_xfer_partial): Likewise.
1082 * record-full.c (record_full_xfer_partial): Likewise.
1083 (record_full_core_xfer_partial): Likewise.
1084 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1085 instead of plongest.
1086 (gdbsim_xfer_partial): Likewise.
1087 * remote.c (remote_xfer_partial): Likewise.
1088 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1089 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1091 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1092 (rs6000_xfer_shared_libraries): Likewise.
1093 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1094 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1095 (sparc_xfer_partial): Likewise.
1096 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1097 (spu_xfer_partial): Likewise.
1098 * spu-multiarch.c (spu_xfer_partial): Likewise.
1099 * target.c (target_read_live_memory): Likewise.
1100 (memory_xfer_live_readonly_partial): Likewise.
1101 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1102 (target_xfer_partial, default_xfer_partial): Likewise.
1103 (current_xfer_partial): Likewise.
1104 * tracepoint.c (tfile_xfer_partial): Likewise.
1105 * windows-nat.c (windows_xfer_memory): Likewise. Call
1106 pulongest instead of plongest.
1107 (windows_xfer_partial): Likewise.
1108 (windows_xfer_shared_libraries): Likewise.
1110 2014-01-14 Yao Qi <yao@codesourcery.com>
1112 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1113 target_xfer_partial_ftype.
1115 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1119 * valops.c (value_struct_elt_bitpos): New function
1120 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1121 object to 'None' if the field name is an empty string ("").
1122 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1123 attribute to look for a field when 'name' is 'None'.
1124 (get_field_type): New function
1126 2014-01-13 Doug Evans <dje@google.com>
1129 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1130 (try_open_dwop_file): Ditto.
1131 * gdb_bfd.c: #include "vec.h".
1132 (bfdp): New typedef.
1133 (struct gdb_bfd_data): New member included_bfds.
1134 (gdb_bfd_unref): Unref all included bfds.
1135 (gdb_bfd_record_inclusion): New function.
1136 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1138 2014-01-13 Tom Tromey <tromey@redhat.com>
1140 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1142 2014-01-13 Tom Tromey <tromey@redhat.com>
1144 * defs.h (use_windows): Remove.
1145 * gdb.c (main): Update.
1146 * main.c (captured_main, gdb_main): Update.
1147 * main.h (struct captured_main_args) <use_windows>: Remove.
1148 * top.c (use_windows): Remove.
1150 2014-01-13 Tom Tromey <tromey@redhat.com>
1152 * defs.h (deprecated_flush_hook): Remove.
1154 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1157 * linux-thread-db.c (try_thread_db_load): Add parameter
1158 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1159 (try_thread_db_load_from_pdir_1): Move it there from here.
1160 (try_thread_db_load_from_sdir): Update caller.
1161 (try_thread_db_load_from_dir): Move it there from here.
1163 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1165 * regformats/regdat.sh: Always rewrite the register file.
1167 2014-01-13 Pedro Alves <palves@redhat.com>
1169 * Makefile.in (CHECK_HEADERS): New variable.
1170 (check-headers:): New rule.
1172 2014-01-13 Tom Tromey <tromey@redhat.com>
1174 * cli/cli-setshow.c (do_set_command): Update.
1175 * defs.h (deprecated_set_hook): Remove.
1176 * top.c (deprecated_set_hook): Remove.
1178 2014-01-13 Pedro Alves <palves@redhat.com>
1180 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1181 the tracepoint if the PC is a pseudo-register.
1183 2014-01-13 Tom Tromey <tromey@redhat.com>
1185 * defs.h (XCALLOC): Remove.
1186 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1187 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1188 * dwarf2loc.c (allocate_piece_closure): Likewise.
1189 * elfread.c (elf_symfile_segments): Likewise.
1190 (elf_symfile_segments): Likewise.
1191 * gdbtypes.c (copy_type_recursive): Likewise.
1192 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1193 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1194 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1196 * mt-tdep.c (mt_gdbarch_init): Likewise.
1197 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1199 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1200 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1201 * registry.c (registry_alloc_data): Likewise.
1202 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1203 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1204 * serial.c (serial_fdopen_ops): Likewise.
1205 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1207 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1208 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1211 2014-01-13 Tom Tromey <tromey@redhat.com>
1213 * defs.h (XMALLOC): Remove.
1214 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1215 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1216 * cli-out.c (struct ui_out *): Likewise.
1217 * cli/cli-dump.c (add_dump_command): Likewise.
1218 (add_dump_command): Likewise.
1219 * complaints.c (get_complaints): Likewise.
1220 (find_complaint): Likewise.
1221 * dwarf2-frame.c (execute_cfa_program): Likewise.
1222 * dwarf2read.c (abbrev_table_read_table): Likewise.
1223 * gdbarch.sh: Likewise.
1224 * gdbarch.c: Rebuild.
1225 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1226 * interps.c (interp_new): Likewise.
1227 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1228 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1229 * mi/mi-console.c (mi_console_file_new): Likewise.
1230 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1231 * mi/mi-out.c (mi_out_new): Likewise.
1232 * mi/mi-parse.c (mi_parse): Likewise.
1233 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1234 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1235 * observer.c (xalloc_observer_list_node): Likewise.
1236 * regcache.c (regcache_xmalloc_1): Likewise.
1237 * reggroups.c (reggroup_new): Likewise.
1238 (_initialize_reggroup): Likewise.
1239 * registry.c (register_data_with_cleanup): Likewise.
1240 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1241 * ser-base.c (serial_ttystate): Likewise.
1242 * ser-mingw.c (make_pipe_state): Likewise.
1243 * ser-pipe.c (pipe_open): Likewise.
1244 * serial.c (serial_open): Likewise.
1245 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1246 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1247 (tui_alloc_win_info): Likewise.
1248 (tui_add_content_elements): Likewise.
1249 * tui/tui-file.c (tui_file_new): Likewise.
1250 * tui/tui-out.c (tui_out_new): Likewise.
1251 * ui-file.c (mem_file_new): Likewise.
1252 * ui-out.c (push_level): Likewise.
1253 (make_cleanup_ui_out_end): Likewise.
1254 (append_header_to_list): Likewise.
1255 (ui_out_new): Likewise.
1256 * user-regs.c (user_reg_add_builtin): Likewise.
1258 2014-01-13 Tom Tromey <tromey@redhat.com>
1260 * defs.h (XZALLOC): Remove.
1261 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1262 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1263 (get_ada_tasks_inferior_data): Likewise.
1264 * auto-load.c (get_auto_load_pspace_data): Likewise.
1265 * auxv.c (get_auxv_inferior_data): Likewise.
1266 * bfd-target.c (target_bfd_reopen): Likewise.
1267 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1268 (deprecated_insert_raw_breakpoint): Likewise.
1269 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1270 * corelow.c (core_open): Likewise.
1271 * darwin-nat.c (darwin_check_new_threads): Likewise.
1272 (darwin_attach_pid): Likewise.
1273 * dummy-frame.c (dummy_frame_push): Likewise.
1274 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1275 * dwarf2loc.c (allocate_piece_closure): Likewise.
1276 * elfread.c (elf_symfile_segments): Likewise.
1277 * eval.c (ptrmath_type_p): Likewise.
1278 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1279 * gdbtypes.c (alloc_type_arch): Likewise.
1280 (alloc_type_instance): Likewise.
1281 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1282 * inf-child.c (inf_child_can_use_agent): Likewise.
1283 * inflow.c (get_inflow_inferior_data): Likewise.
1284 * infrun.c (save_infcall_suspend_state): Likewise.
1285 * jit.c (jit_reader_load): Likewise.
1286 (get_jit_objfile_data): Likewise.
1287 (get_jit_program_space_data): Likewise.
1288 (jit_object_open_impl): Likewise.
1289 (jit_symtab_open_impl): Likewise.
1290 (jit_block_open_impl): Likewise.
1291 (jit_frame_sniffer): Likewise.
1292 * linux-fork.c (add_fork): Likewise.
1293 * maint.c (make_command_stats_cleanup): Likewise.
1294 * objfiles.c (get_objfile_pspace_data): Likewise.
1295 * opencl-lang.c (struct lval_closure): Likewise.
1296 * osdata.c (osdata_start_osdata): Likewise.
1297 * progspace.c (new_address_space): Likewise.
1298 (add_program_space): Likewise.
1299 * remote-sim.c (get_sim_inferior_data): Likewise.
1300 * sh-tdep.c (sh_gdbarch_init): Likewise.
1301 * skip.c (Ignore): Likewise.
1302 (skip_delete_command): Likewise.
1303 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1304 (library_list_start_library): Likewise.
1305 (solib_aix_current_sos): Likewise.
1306 * solib-darwin.c (get_darwin_info): Likewise.
1307 (darwin_current_sos): Likewise.
1308 * solib-dsbt.c (get_dsbt_info): Likewise.
1309 * solib-ia64-hpux.c (new_so_list): Likewise.
1310 (ia64_hpux_get_solib_linkage_addr): Likewise.
1311 * solib-spu.c (append_ocl_sos): Likewise.
1312 (spu_current_sos): Likewise.
1313 * solib-svr4.c (get_svr4_info): Likewise.
1314 (svr4_keep_data_in_core): Likewise.
1315 (library_list_start_library): Likewise.
1316 (svr4_default_sos): Likewise.
1317 (svr4_read_so_list): Likewise.
1318 * solib-target.c (library_list_start_library): Likewise.
1319 (solib_target_current_sos): Likewise.
1320 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1321 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1322 * symfile.c (default_symfile_segments): Likewise.
1323 * target-descriptions.c (tdesc_data_init): Likewise.
1324 (tdesc_create_reg): Likewise.
1325 (struct tdesc_type *): Likewise.
1326 (tdesc_create_vector): Likewise.
1327 (tdesc_set_struct_size): Likewise.
1328 (struct tdesc_type *): Likewise.
1329 (tdesc_free_feature): Likewise.
1330 (tdesc_create_feature): Likewise.
1331 * windows-nat.c (windows_add_thread): Likewise.
1332 (windows_make_so): Likewise.
1333 * xml-support.c (gdb_xml_body_text): Likewise.
1334 (gdb_xml_create_parser_and_cleanup): Likewise.
1335 (xml_process_xincludes): Likewise.
1336 * xml-syscall.c (allocate_syscalls_info): Likewise.
1337 (syscall_create_syscall_desc): Likewise.
1339 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1341 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1342 function, with code from i386_stap_parse_special_token.
1343 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1344 (i386_stap_parse_special_token): Move code to the two functions
1347 2014-01-09 Pedro Alves <palves@redhat.com>
1348 Hui Zhu <hui@codesourcery.com>
1351 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1352 bp_err_string. Don't mark the location shlib_disabled if the
1353 error thrown wasn't a generic or memory error. Catch errors
1354 thrown while inserting breakpoints in overlayed code. Output
1355 error message of software breakpoints.
1356 * remote.c (remote_insert_breakpoint): If this breakpoint has
1357 target-side commands but this stub doesn't support Z0 packets,
1358 throw NOT_SUPPORTED_ERROR error.
1359 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1360 * target.h (target_insert_breakpoint): Extend comment.
1361 (target_insert_hw_breakpoint): Add comment.
1363 2014-01-08 Pedro Alves <palves@redhat.com>
1365 * remote.c (remote_add_thread): Add threads silently if starting
1367 (remote_notice_new_inferior): If in all-stop, and starting up,
1368 don't call notice_new_inferior.
1369 (get_current_thread): New function, factored out from ...
1370 (add_current_inferior_and_thread): ... this. Adjust.
1371 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1372 found any thread, then select the remote's current thread as GDB's
1375 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1377 * NEWS: Create a new section for the next release branch.
1378 Rename the section of the current branch, now that it has
1381 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1383 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1384 * version.in: Bump version to 7.7.50.DATE-cvs.
1386 2014-01-08 Yao Qi <yao@codesourcery.com>
1388 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1389 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1390 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1392 2014-01-08 Yao Qi <yao@codesourcery.com>
1394 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1395 return value of bfd_get_filename to symbol_file_add_from_bfd.
1397 2014-01-08 Pierre Muller <muller@sourceware.org>
1400 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1401 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1402 to prim_record_mininal_symbol_and_info.
1403 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1404 in call to prim_record_minimal_symbol_and_info.
1405 (read_pe_exported_syms): Set index field of section_data.
1407 2014-01-07 Andrew Pinski <apinski@cavium.com>
1409 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1410 * features/aarch64.c: Regenerate.
1412 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1414 * target.c (return_null): Define.
1415 (update_current_target): Use it instead of return_zero for
1416 functions that return a pointer.
1418 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1420 * source.c (add_path): Fix check for duplicated paths in the previously
1423 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1425 * ada-lang.c: Remove duplicated include statements.
1426 * alphabsd-nat.c: Ditto.
1427 * amd64-darwin-tdep.c: Ditto.
1428 * amd64fbsd-nat.c: Ditto.
1429 * auto-load.c: Ditto.
1431 * breakpoint.c: Ditto.
1433 * fork-child.c: Ditto.
1434 * gdb_usleep.c: Ditto.
1435 * i386-darwin-tdep.c: Ditto.
1436 * i386fbsd-nat.c: Ditto.
1438 * inferior.c: Ditto.
1440 * linux-nat.c: Ditto.
1441 * linux-tdep.c: Ditto.
1442 * m68kbsd-nat.c: Ditto.
1443 * m68klinux-nat.c: Ditto.
1444 * microblaze-tdep.c: Ditto.
1445 * mips-linux-tdep.c: Ditto.
1446 * mn10300-tdep.c: Ditto.
1447 * nto-tdep.c: Ditto.
1448 * opencl-lang.c: Ditto.
1450 * printcmd.c: Ditto.
1451 * regcache.c: Ditto.
1452 * remote-m32r-sdi.c: Ditto.
1456 * tilegx-linux-nat.c: Ditto.
1457 * tilegx-tdep.c: Ditto.
1458 * tracepoint.c: Ditto.
1460 * vaxbsd-nat.c: Ditto.
1461 * windows-nat.c: Ditto.
1462 * xtensa-tdep.c: Ditto.
1464 2014-01-07 Yao Qi <yao@codesourcery.com>
1466 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1468 2014-01-07 Yao Qi <yao@codesourcery.com>
1469 Joel Brobecker <brobecker@adacore.com>
1471 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1472 (pdc_write_regs): Likewise.
1473 (fetch_regs_kernel_thread): Likewise.
1474 (store_regs_kernel_thread): Likewise.
1476 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1478 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1479 tagged type objects to their actual type.
1481 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1483 * ada-valprint.c (print_field_values): Add "language" parameter.
1484 Update calls to print_field_values and print_variant_part.
1485 Pass new parameter "language" in call to val_print instead
1486 of "current_language". Replace call to ada_val_print by call
1488 (print_variant_part): Add "language" parameter.
1489 (ada_val_print_struct_union): Update call to print_field_values.
1491 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1493 * ada-valprint.c (ui_memcpy): Delete.
1494 (ada_print_floating): Update documentation. Add empty line
1495 between between function documentation and implementation.
1496 Delete variable "buffer". Use ui_file_xstrdup in place of
1497 ui_file_put. Minor adjustments following this change.
1499 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1501 * ada-valprint.c (ada_val_print_string): New function,
1502 extracted from ada_val_print_array.
1503 (ada_val_print_array): Replace extracted code by call
1504 to ada_val_print_string followed by a return. Move
1505 "else" branch to the function's top block.
1507 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1509 * ada-valprint.c (ada_val_print_array): Move implementation
1510 down. Rename parameter "offset" and "val" into "offset_aligned"
1511 and "original_value" respectively. Add parameter "offset".
1513 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1515 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1516 re-organizing the code. Change the "???" message printed
1517 when target type is a TYPE_CODE_UNDEF into
1518 "<ref to undefined type>".
1520 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1522 * ada-valprint.c (print_record): Delete, implementation inlined...
1523 (ada_val_print_struct_union): ... here. Remove call to
1524 ada_check_typedef in inlined implementation.
1526 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1528 * ada-valprint.c (ada_val_print_gnat_array): New function,
1529 extracted from ada_val_print_1;
1530 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1531 (ada_val_print_flt, ada_val_print_struct_union)
1532 (ada_val_print_ref): Likewise.
1533 (ada_val_print_1): Delete variables i and elttype.
1534 Replace extracted-out code by call to corresponding
1537 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1539 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1541 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1543 * ada-valprint.c (ada_val_print_1): Replace calls to
1544 ada_val_print_1 by calls to val_print.
1546 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1548 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1549 Update calls to self accordingly. Replace calls to c_val_print
1550 by calls to val_print.
1552 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1554 * ada-valprint.c (print_record): Delete declaration.
1555 (adjust_type_signedness, ada_val_print_1): Likewise.
1556 (ada_val_print): Move function implementation down.
1557 (print_variant_part, print_field_values, print_record):
1558 Move function implementation up.
1560 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1562 * python/py-type.c (typy_get_name): New function.
1563 (type_object_getset): Add entry for attribute "name".
1564 * NEWS: Add entry mentioning this new attribute.
1566 2014-01-07 Yao Qi <yao@codesourcery.com>
1568 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1571 2014-01-07 Yao Qi <yao@codesourcery.com>
1573 * gnu-nat.c (info_port_rights): Add qualifier const to
1576 2014-01-07 Yao Qi <yao@codesourcery.com>
1578 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1580 2014-01-07 Yao Qi <yao@codesourcery.com>
1582 * gnu-nat.c (make_inf) Update declaration.
1583 (make_inf): Make it static.
1584 (inf_set_traced): Likewise.
1585 (inf_port_to_thread, inf_task_died_status): Likewise.
1587 2014-01-07 Yao Qi <yao@codesourcery.com>
1589 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1591 2014-01-07 Yao Qi <yao@codesourcery.com>
1593 * gnu-nat.c (_initialize_gnu_nat): Declare.
1595 2014-01-07 Yao Qi <yao@codesourcery.com>
1597 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1599 (struct gdbarch_info) <byte_order>: Change type to
1601 <byte_order_for_code>: Likewise.
1602 * gdbarch.c, gdbarch.h: Regenerated.
1604 2014-01-06 Sasha Smundak <asmundak@google.com>
1606 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1608 2014-01-06 Tom Tromey <tromey@redhat.com>
1610 * doublest.c (convert_doublest_to_floatformat): Use const, not
1612 * somread.c (som_symtab_read): Likewise.
1614 2014-01-07 Hui Zhu <hui@codesourcery.com>
1616 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1617 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1618 (gdb_bfd_fopen): Ditto.
1619 (gdb_bfd_openr): Ditto.
1620 (gdb_bfd_openw): Ditto.
1621 (gdb_bfd_openr_iovec): Ditto.
1622 (gdb_bfd_fdopenr): Ditto.
1623 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1624 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1626 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1628 * symfile-mem.c (symbol_file_add_from_memory): Removed
1629 gdb_bfd_stash_filename.
1631 2014-01-03 Doug Evans <dje@google.com>
1633 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1636 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1638 Update year range in copyright notice of all files.
1640 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1642 * top.c (print_gdb_version): Set copyright year to 2014.
1644 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1646 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1648 For older changes see ChangeLog-2013.
1654 version-control: never