1 2016-12-09 Yao Qi <yao.qi@linaro.org>
4 * rx-tdep.c (rx_psw_type): New function.
5 (rx_fpsw_type): New function.
6 (rx_register_type): Call rx_psw_type and rx_fpsw_type.
7 (rx_gdbarch_init): Move code to rx_psw_type and
10 2016-12-09 Yao Qi <yao.qi@linaro.org>
13 * rl78-tdep.c (rl78_psw_type): New function.
14 (rl78_register_type): Call rl78_psw_type.
15 (rl78_gdbarch_init): Move code to rl78_psw_type.
17 2016-12-09 Yao Qi <yao.qi@linaro.org>
19 * aarch64-tdep.c (instruction_reader::read): Call
20 read_code_unsigned_integer instead of
21 read_memory_unsigned_integer.
23 2016-12-09 Yao Qi <yao.qi@linaro.org>
25 * arm-tdep.c (skip_prologue_function): Call
26 read_code_unsigned_integer instead of
27 read_memory_unsigned_integer.
28 (thumb_analyze_prologue): Likewise.
29 (arm_analyze_load_stack_chk_guard): Likewise.
30 (arm_skip_stack_protector): Likewise.
31 (arm_analyze_prologue):Likewise.
32 (extend_buffer_earlier): Call target_read_code instead
33 of target_read_memory.
34 (arm_adjust_breakpoint_address): Likewise.
36 2016-12-09 Thomas Schwinge <thomas@codesourcery.com>
38 * gnu-nat.c (gnu_create_inferior): After startup_inferior, call
41 * inferior.c (print_selected_inferior): Avoid PATH_MAX usage.
43 2016-12-08 Simon Marchi <simon.marchi@ericsson.com>
44 Thomas Schwinge <thomas@codesourcery.com>
46 * gnu-nat.c (set_sig_thread_cmd): Use parse_thread_id instead of
47 global_thread_id_to_ptid.
49 2016-12-08 Thomas Schwinge <thomas@codesourcery.com>
51 * config/i386/i386gnu.mh (%_S.o %_U.o): Add "-x c" to
53 * gnu-nat.c: #include Mach/Hurd headers before all others. Wrap
54 Mach/Hurd headers and MIG stubs' prototypes in 'extern "C"'.
55 * i386-gnu-nat.c: Likewise.
57 * gnu-nat.c (proc_get_exception_port, proc_set_exception_port)
58 (INF_RESUME_MSGPORT_RPC, proc_get_state, _proc_get_exc_port)
59 (proc_steal_exc_port, proc_restore_exc_port, make_proc)
60 (inf_startup, inf_set_pid, inf_validate_procinfo)
61 (inf_validate_task_sc, inf_set_traced, inf_validate_procs)
62 (inf_signal, inf_continue, gnu_wait, S_exception_raise_request)
63 (do_mach_notify_dead_name, S_proc_wait_reply)
64 (S_msg_sig_post_untraced_reply, S_msg_sig_post_reply)
65 (port_msgs_queued, gnu_read_inferior, gnu_write_inferior)
66 (gnu_find_memory_regions, steal_exc_port, thread_takeover_sc_cmd)
67 (flush_inferior_icache): Instead of "error_t" use "kern_return_t".
68 * i386-gnu-nat.c (fetch_fpregs, store_fpregs, i386_gnu_dr_get)
69 (i386_gnu_dr_set): Likewise.
71 * gnu-nat.c (set_task_pause_cmd, set_signals_cmd)
72 (set_exceptions_cmd): Add variants taking an "int arg" instead of
73 a "char *". Make the "char *" variants use the former.
74 (set_noninvasive_cmd): Also use the "int arg" variants.
76 * gnu-nat.c (gnu_create_inferior): Move nested "trace_me"
78 (gnu_ptrace_me): ... here.
80 * i386-gnu-nat.c (i386_gnu_dr_set_control_one)
81 (i386_gnu_dr_set_addr_one): Explicitly cast "void *".
83 2016-12-07 Thomas Schwinge <thomas@codesourcery.com>
85 * gnu-nat.c (set_sig_thread_cmd): Call global_thread_id_to_ptid
86 instead of thread_id_to_pid.
88 2016-12-06 Simon Marchi <simon.marchi@ericsson.com>
90 * inferior.c (inferior_command): Remove duplicate
91 find_inferior_id call.
93 2016-12-06 Yao Qi <yao.qi@linaro.org>
95 * frame.c (frame_register_unwind): Set *realnump if *lvalp is
97 * value.c (deprecated_value_next_frame_id_hack): Assert
98 value->lval is lval_register.
99 (deprecated_value_regnum_hack): Likewise.
101 2016-12-02 Simon Marchi <simon.marchi@polymtl.ca>
103 * ui-out.h: Include "common/enum-flags.h".
104 (enum ui_flags): Rename to ...
105 (enum ui_out_flag): ... this.
106 (ui_out_flags): Define enum flag type.
107 (ui_out_test_flags): Change type of parameter to ui_out_flags.
108 (ui_out_new): Likewise.
109 * ui-out.c (ui_out_test_flags): Likewise.
110 (ui_out_new): Likewise.
111 * cli-out.c (cli_out_new): Update variable type.
112 * mi/mi-out.c (mi_out_new): Likewise.
113 * tui/tui-out.c (tui_out_new): Likewise.
115 2016-12-02 Pedro Alves <palves@redhat.com>
117 * NEWS: Mention that user commands now accept an unlimited number
119 * cli/cli-script.c: Include <vector>.
120 (struct string_view): New type.
121 (MAXUSERARGS): Delete.
122 (struct user_args): Now a C++ class.
123 (user_args_stack): New.
124 (struct scoped_user_args_level): New type.
125 (execute_user_command): Use scoped_user_args_level.
126 (arg_cleanup): Delete.
127 (setup_user_args): Deleted, and refactored as ...
128 (user_args::user_args): ... this new constructor. Limit of number
129 of arguments removed.
130 (insert_user_defined_cmd_args): Defer to user_args_stack.
131 (user_args::insert_args): New, bits based on old
132 insert_user_defined_cmd_args with limit of number of arguments
135 2016-12-02 Pedro Alves <palves@redhat.com>
138 * NEWS: Mention "eval" expands user-defined command arguments.
139 * cli/cli-script.c (execute_control_command): Adjust to rename.
140 (insert_args): Rename to ...
141 (insert_user_defined_cmd_args): ... this, and make extern.
142 * cli/cli-script.h (insert_user_defined_cmd_args): New
144 * printcmd.c: Include "cli/cli-script.h".
145 (eval_command): Call insert_user_defined_cmd_args.
147 2016-12-02 Tom Tromey <tom@tromey.com>
150 * dwarf2read.c (struct partial_die_info) <main_subprogram>: New
152 (add_partial_symbol): Call set_objfile_main_name.
153 (read_partial_die): Handle DW_AT_main_subprogram.
154 <DW_AT_calling_convention>: don't call set_objfile_main_name, but
155 set main_subprogram flag.
157 2016-12-02 Simon Marchi <simon.marchi@ericsson.com>
159 * tracefile-tfile.c (tfile_write_status): Adjust to renames.
160 * tracefile.c (trace_save_command): Rename to...
161 (tsave_command): ...this.
162 (_initialize_tracefile): Adjust to renames.
163 * tracepoint.c (trace_actions_command): Rename to...
164 (actions_command): ...this.
165 (trace_start_command): Rename to...
166 (tstart_command): ...this, and adjust to renames..
167 (trace_stop_command): Rename to...
168 (tstop_command): ...this.
169 (trace_status_command): Rename to...
170 (tstatus_command): ...this, and adjust to renames.
171 (trace_find_command): Rename to...
172 (tfind_command): ...this.
173 (trace_find_pc_command): Rename to...
174 (tfind_pc_command): ...this.
175 (trace_find_tracepoint_command): Rename to...
176 (tfind_tracepoint_command): ...this.
177 (trace_find_line_command): Rename to...
178 (tfind_line_command): ...this.
179 (trace_find_range_command): Rename to...
180 (tfind_range_command): ...this.
181 (trace_find_outside_command): Rename to...
182 (tfind_outside_command): ...this.
183 (trace_dump_command): Rename to...
184 (tdump_command): ...this.
185 (tfind_1): Adjust to renames.
186 (trace_find_end_command): Rename to...
187 (tfind_end_command): ...this, and adjust to renames..
188 (trace_status_mi): Adjust to renames.
189 (parse_trace_status): Adjust to renames.
190 (_initialize_tracepoint): Adjust to renames.
191 * tracepoint.h (enum trace_stop_reason) <tstop_command>: Rename
193 <trace_stop_command>: ...this.
195 2016-12-02 Simon Marchi <simon.marchi@ericsson.com>
197 * mi/mi-out.c (mi_ui_out_data) <suppress_output>: Remove.
198 (mi_table_body): Remove suppress_output check.
199 (mi_table_end): Likewise.
200 (mi_table_header): Likewise.
201 (mi_begin): Likewise.
203 (mi_field_int): Likewise.
204 (mi_field_string): Likewise.
205 (mi_field_fmt): Likewise.
206 (mi_out_data_ctor): Likewise.
208 2016-12-02 Yao Qi <yao.qi@linaro.org>
209 Pedro Alves <palves@redhat.com>
211 * aarch64-tdep.c (aarch64_analyze_prologue): Recognize STR
213 (aarch64_analyze_prologue_test): More tests.
215 2016-12-02 Yao Qi <yao.qi@linaro.org>
216 Pedro Alves <palves@redhat.com>
218 * aarch64-tdep.c: Include "selftest.h".
219 (abstract_instruction_reader): New class.
220 (instruction_reader): New class.
221 (aarch64_analyze_prologue): Add new parameter reader. Call
222 reader.read instead of read_memory_unsigned_integer.
223 [GDB_SELF_TEST] (instruction_reader_test): New class.
224 (aarch64_analyze_prologue_test): New function.
225 (_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register
226 selftests::aarch64_analyze_prologue_test.
227 * trad-frame.c (trad_frame_cache_zalloc):
228 (trad_frame_alloc_saved_regs): Add a new function.
229 * trad-frame.h (trad_frame_alloc_saved_regs): Declare.
231 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
233 * ui-out.c (enum ui_out_table_state): Move to class
234 ui_out_table as ui_out_table::state.
235 (struct ui_out_table): Change to ...
236 (class ui_out_table): ... this.
238 <entry_level>: Rename to ...
239 <m_entry_level>: ... this.
240 <columns>: Rename to ...
241 <m_nr_cols>: ... this.
244 <headers>: Rename to ...
245 <m_headers>: ... this.
246 <headers_iterator>: Rename to ...
247 <m_headers_iterator>: ... this.
248 <start_body, append_header, start_row, get_next_header,
249 query_field, current_state, entry_level>: New methods.
250 (struct ui_out) <table>: Change type to unique_ptr to
252 (append_header_to_list, get_next_header, clear_header_list,
253 clear_table): Remove.
254 (ui_out_table_begin): Instantiate ui_out_table object. Update
256 (ui_out_table_body): Update table check, replace code with call
257 to ui_out_table::start_body.
258 (ui_out_table_end): Update table check, replace manual cleanup
259 with assignment of uiout->table unique_ptr to nullptr.
260 (ui_out_table_header): Update table check, replace call to
261 append_header_to_list with call to append_header method.
262 (ui_out_begin): Remove one table state check, update another.
263 Replace code with call to start_row method.
264 (verify_field): Update table checks.
265 (ui_out_query_field): Update table check, replace code with call
266 to query_field method.
267 (ui_out_new): Remove table initialization code.
269 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
271 * ui-out.c (enum ui_out_table_state): New enum.
272 (struct ui_out_table) <body_flag>: Remove field.
274 (ui_out_table_begin): Replace usages of body_flag with state.
275 (ui_out_table_body): Likewise.
276 (ui_out_table_end): Likewise.
277 (ui_out_table_header): Likewise.
278 (ui_out_begin): Likewise.
279 (verify_field): Likewise.
280 (ui_out_new): Likewise.
282 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
284 * ui-out.h (ui_out_begin_ftype): Remove level parameter.
285 (ui_out_end_ftype): Likewise.
286 * ui-out.c (struct ui_out) <level>: Replace field with a method
287 that dynamically computes the result.
288 (current_level): Get vector's back item instead of using
290 (push_level): Make return type void.
291 (pop_level): Make return type void and update access to
293 (uo_begin): Remove level parameter.
295 (ui_out_table_begin): Update access to uiout::level.
296 (ui_out_begin): Don't read return value from push_level, call
297 uiout->level() instead, update call to uo_begin.
298 (ui_out_end): Don't read return value from pop_level, update
300 (verify_field): Update access to uiout->level.
301 (ui_out_new): Don't initialize ui_out::level, call push_level
302 to push the initial level instead of doing it by hand.
303 * cli-out.c (cli_begin): Remove level parameter.
305 * mi/mi-out.c (mi_begin): Likewise.
308 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
310 * ui-out.c (struct ui_out_level): Replace with ...
311 (class ui_out_level): ... this.
312 (current_level): Update.
313 (push_level): Update.
315 (verify_field): Update.
316 (ui_out_new): Update.
318 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
320 * ui-out.c (struct ui_out_hdr): Replace with ...
321 (class ui_out_hdr): ... this.
322 (append_header_to_list): Update.
323 (get_next_header): Update.
324 (ui_out_query_field): Update.
326 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
328 * mi/mi-out.c (mi_table_header): Change char * args to
330 * cli-out.c (cli_table_header): Likewise.
331 * ui-out.h (table_header_ftype): Likewise.
332 (ui_out_table_header): Constify colhdr argument.
333 (ui_out_query_field): Constify col_name argument.
334 * ui-out.c (ui_out_hdr) <col_name, colhdr>: Change type to
336 (uo_table_header): Change char * args to std::string.
337 (ui_out_table_header): Likewise.
338 (get_next_header): Constify colhdr argument and adapt.
339 (clear_header_list): Don't free col_name/colhdr fields.
340 (append_header_to_list): Change char * args to std::string and
342 (verify_field): Constify variable.
343 (ui_out_query_field): Constify col_name argument and adapt.
344 * breakpoint.c (wrap_indent_at_field): Constify variable.
346 2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
348 * ui-out.c (struct ui_out_hdr) <next>: Remove.
349 (struct ui_out_table) <header_first, header_last, header_next>: Remove.
350 <headers, headers_iterator>: New fields.
351 (ui_out_table_body): Update for the new data structure.
352 (ui_out_begin): Likewise.
353 (clear_header_list): Likewise.
354 (append_header_to_list): Likewise.
355 (get_next_header): Likewise.
356 (ui_out_query_field): Likewise.
357 (ui_out_new): Likewise.
359 2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
361 * ui-out.c (struct ui_out_table) <id>: Change type to
363 (ui_out_table_begin): Change tblid parameter type to
364 std::string, adapt code.
365 update following type change.
366 (clear_table): Update.
367 (ui_out_new): Update.
369 2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
371 * cli-out.h (cli_ui_out_data) <streams>: Change type to
373 * cli-out.c: Remove vec.h include.
374 (cli_uiout_dtor): Update.
375 (cli_field_fmt): Update.
376 (cli_spaces): Update.
378 (cli_message): Update.
380 (cli_redirect): Update.
381 (out_field_fmt): Update.
382 (field_separator): Update.
383 (cli_out_data_ctor): Update.
384 (cli_out_new): Update.
385 (cli_out_set_stream): Update.
387 2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
389 * mi/mi-out.c: Remove vec.h include.
390 (mi_ui_out_data) <streams>: Change type to std::vector.
391 (mi_field_string): Update.
392 (mi_field_fmt): Update.
394 (mi_redirect): Update.
395 (field_separator): Update.
398 (mi_out_buffered): Update.
399 (mi_out_rewind): Update.
400 (mi_out_put): Update.
401 (mi_out_data_ctor): Update.
402 (mi_out_data_dtor): Don't free streams.
404 2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
406 * ui-out.c (ui_out_level_p): Remove typedef.
407 (DEF_VEC_P (ui_out_level_p)): Remove definition.
408 (struct ui_out) <levels>: Change type to vector of unique_ptr of
410 (current_level): Update.
411 (push_level): Update.
412 (pop_level): Update, don't manually delete the ui_out_level
414 (ui_out_new): Update.
416 2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
418 * cli-out.c (cli_uiout_dtor): Use delete instead of xfree.
419 (cli_out_new): Use new instead of XNEW.
420 * mi/mi-out.c (mi_out_data_dtor): Use delete instead of xfree.
421 (mi_out_new): Use new instead of XNEW.
422 * tui/tui-out.c (tui_out_new): Likewise.
423 * ui-out.c (push_level): Likewise.
424 (pop_level): Use delete instead of xfree.
425 (clear_header_list): Use delete instead of xfree.
426 (append_header_to_list): Use new instead of XNEW.
427 (ui_out_new): Likewise.
429 2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
431 * disable-implicit-rules.mk: New file.
432 * Makefile.in: Include disable-implicit-rules.mk.
433 * data-directory/Makefile.in: Likewise.
434 * gnulib/Makefile.in: Likewise.
436 2016-11-30 Yao Qi <yao.qi@linaro.org>
438 * arm-tdep.c (arm_scan_prologue): Read memory as unsigned integer.
439 (arm_exidx_unwind_sniffer): Likewise.
441 2016-11-28 Simon Marchi <simon.marchi@polymtl.ca>
443 * record-full.c (record_full_open_1): Fix debug output.
445 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
447 * mi/mi-out.c (mi_message): Remove verbosity argument.
448 * ada-tasks.c (print_ada_task_info, info_task, task_command):
450 * auto-load.c (auto_load_info_scripts): Likewise.
451 * breakpoint.c (breakpoint_1, watchpoints_info, tracepoints_info):
453 * cli-out.c (cli_message): Remove verbosity argument.
454 * inferior.c (print_inferior): Update call.
455 * linux-thread-db.c (info_auto_load_libthread_db): Likewise.
456 * probe.c (info_probes_for_ops): Likewise.
457 * skip.c (skip_info): Likewise.
458 * solib.c (info_sharedlibrary_command): Likewise.
459 * symfile.c (load_progress): Likewise.
460 * thread.c (print_thread_info_1): Likewise.
461 * ui-out.c (uo_message, ui_out_message): Remove verbosity argument.
462 (ui_out_get_verblvl): Remove.
463 * ui-out.h (ui_out_message): Remove verbosity argument.
464 (ui_out_get_verblvl): Remove.
465 (message_ftype): Remove verbosity argument.
467 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
469 * mi/mi-out.c (mi_wrap_hint): Constify argument.
470 * cli-out.c (cli_wrap_hint): Likewise.
471 * ui-out.c (ui_out_wrap_hint, uo_wrap_hint): Likewise.
472 * ui-out.h (ui_out_wrap_hint, wrap_hint_ftype): Likewise.
473 * utils.c (wrap_here): Likewise.
474 (wrap_indent): Constify.
475 * utils.h (wrap_here): Constify argument.
477 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
479 * ui-out.c (uo_redirect): Return the return value from the
480 implementation function.
482 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
484 * ui-out.c (ui_out_destroy, uo_data_destroy): Remove.
485 * ui-out.h (ui_out_destroy): Remove.
487 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
489 * mi/mi-out.c (ui_out_data): Rename to ...
490 (mi_ui_out_data): ... this.
492 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
494 * ui-out.c (_initialize_ui_out): Remove.
495 (ui_out_set_flags): Remove.
496 (ui_out_clear_flags): Remove.
497 * ui-out.h (ui_out_begin_cleanup_end): Remove.
498 (ui_out_begin_cleanup_end): Remove.
499 (ui_out_set_flags): Remove.
500 (ui_out_clear_flags): Remove.
501 * mi/mi-out.c (_initialize_mi_out): Remove.
502 (mi_out_buffered): Remove.
503 * mi/mi-out.h (mi_out_buffered): Remove.
505 2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
507 * ui-out.h (struct ui_out_impl): Remove comment.
508 * ui-out.c (struct ui_out): Remove comment.
510 2016-11-25 John Baldwin <jhb@FreeBSD.org>
512 * contrib/ari/gdb_ari.sh (no parameter function): Remove check.
514 2016-11-25 Simon Marchi <simon.marchi@ericsson.com>
516 * Makefile.in: Fix typo.
518 2016-11-25 Simon Marchi <simon.marchi@ericsson.com>
520 * record-full.c (record_full_resume): Fix typos in comment.
522 2016-11-25 Simon Marchi <simon.marchi@ericsson.com>
524 * infcmd.c (interrupt_command): Fix typo in comment.
526 2016-11-24 John Baldwin <jhb@FreeBSD.org>
528 * ada-lang.c (create_excep_cond_exprs): Do not use 'std::move'.
529 * ax-gdb.c (agent_eval_command_one): Likewise.
530 (agent_eval_command_one): Likewise.
531 * breakpoint.c (parse_cond_to_aexpr): Likewise.
532 (parse_cmd_to_aexpr): Likewise.
533 * dtrace-probe.c (dtrace_process_dof_probe): Likewise.
534 * parse.c (parse_expression_for_completion): Likewise.
536 2016-11-24 John Baldwin <jhb@FreeBSD.org>
538 * common/new-op.c (operator new): Mark 'noexcept'.
539 (operator new[]): Likewise.
541 2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
543 * dwarf2loc.c (copy_bitwise): Use memcpy for the middle part, if
546 2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
547 Pedro Alves <palves@redhat.com>
549 * dwarf2loc.c (bits_to_str, check_copy_bitwise)
550 (copy_bitwise_tests): New functions.
551 (_initialize_dwarf2loc): Register the new function
552 copy_bitwise_tests as a unit test.
553 * selftest.c (run_self_tests): Improve the failure message's
554 wording and formatting.
556 2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
558 * dwarf2loc.c (extract_bits_primitive): Remove.
559 (extract_bits): Remove.
560 (copy_bitwise): Rewrite. Fixes a possible corruption that may
561 occur for non-byte-aligned copies.
563 2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
566 * dwarf2read.c (dwarf2_add_field): Handle the DWARF V4 attribute
567 DW_AT_data_bit_offset.
569 2016-11-23 Pedro Alves <palves@redhat.com>
571 * Makefile.in (SFILES): Add common/run-time-clock.c.
572 (HFILES_NO_SRCDIR): Add common/run-time-clock.h.
573 (COMMON_OBS): Add run-time-clock.o.
574 * common/run-time-clock.c, common/run-time-clock.h: New files.
575 * defs.h (struct timeval, print_transfer_performance): Delete
577 * event-loop.c (struct gdb_timer) <when>: Now a
578 std::chrono::steady_clock::time_point.
579 (create_timer): use std::chrono::steady_clock instead of
580 gettimeofday. Use new instead of malloc.
581 (delete_timer): Use delete instead of xfree.
582 (duration_cast_timeval): New.
583 (update_wait_timeout): Use std::chrono::steady_clock instead of
585 * maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
586 and "timeval-utils.h".
587 (scoped_command_stats::~scoped_command_stats)
588 (scoped_command_stats::scoped_command_stats): Use
589 std::chrono::steady_clock instead of gettimeofday. Use
590 user_cpu_time_clock instead of get_run_time.
591 * maint.h: Include "run-time-clock.h" and <chrono>.
592 (scoped_command_stats): <m_start_cpu_time>: Now a
593 user_cpu_time_clock::time_point.
594 <m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
595 * mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
596 "gdb_sys_time.h" and <sys/resource.h>.
598 (mi_execute_command): Use new instead of XNEW.
599 (mi_load_progress): Use std::chrono::steady_clock instead of
601 (timestamp): Rewrite in terms of std::chrono::steady_clock,
602 user_cpu_time_clock and system_cpu_time_clock.
603 (timeval_diff): Delete.
604 (print_diff): Adjust to use std::chrono::steady_clock,
605 user_cpu_time_clock and system_cpu_time_clock.
606 * mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
608 (struct mi_timestamp): Change fields types to
609 std::chrono::steady_clock::time_point, user_cpu_time_clock::time
610 and system_cpu_time_clock::time_point, instead of struct timeval.
611 * symfile.c: Include <chrono> instead of <time.h> and
613 (struct time_range): New.
614 (generic_load): Use std::chrono::steady_clock instead of
616 (print_transfer_performance): Replace timeval parameters with a
617 std::chrono::steady_clock::duration parameter. Adjust.
618 * utils.c: Include <chrono> instead of "timeval-utils.h",
619 "gdb_sys_time.h", and <time.h>.
620 (prompt_for_continue_wait_time): Now a
621 std::chrono::steady_clock::duration.
622 (defaulted_query, prompt_for_continue): Use
623 std::chrono::steady_clock instead of
624 gettimeofday/timeval_sub/timeval_add.
625 (reset_prompt_for_continue_wait_time): Use
626 std::chrono::steady_clock::duration instead of struct timeval.
627 (get_prompt_for_continue_wait_time): Return a
628 std::chrono::steady_clock::duration instead of struct timeval.
629 (vfprintf_unfiltered): Use std::chrono::steady_clock instead of
630 gettimeofday. Use std::string. Use '.' instead of ':'.
631 * utils.h: Include <chrono>.
632 (get_prompt_for_continue_wait_time): Return a
633 std::chrono::steady_clock::duration instead of struct timeval.
635 2016-11-22 Simon Marchi <simon.marchi@polymtl.ca>
637 * Makefile.in: Fix whitespace formatting.
639 2016-11-22 Simon Marchi <simon.marchi@polymtl.ca>
641 * Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS,
642 HFILES_NO_SRCDIR, ALLDEPFILES): Rename files.
643 * alphabsd-nat.c: Rename to ...
644 * alpha-bsd-nat.c: ... this, adjust include.
645 * alphabsd-tdep.c: Rename to ...
646 * alpha-bsd-tdep.c: ... this, adjust include.
647 * alphabsd-tdep.h: Rename to ...
648 * alpha-bsd-tdep.h: ... this, adjust include barrier and comment.
649 * alphafbsd-tdep.c: Rename to ...
650 * alpha-fbsd-tdep.c: ... this.
651 * alphanbsd-tdep.c: Rename to ...
652 * alpha-nbsd-tdep.c: ... this, adjust include.
653 * alphaobsd-tdep.c: Rename to ...
654 * alpha-obsd-tdep.c: ... this, adjust include.
655 * amd64bsd-nat.c: Rename to ...
656 * amd64-bsd-nat.c: ... this, adjust include.
657 * amd64fbsd-nat.c: Rename to ...
658 * amd64-fbsd-nat.c: ... this, adjust include.
659 * amd64fbsd-tdep.c: Rename to ...
660 * amd64-fbsd-tdep.c: ... this, adjust include.
661 * amd64nbsd-nat.c: Rename to ...
662 * amd64-nbsd-nat.c: ... this.
663 * amd64nbsd-tdep.c: Rename to ...
664 * amd64-nbsd-tdep.c: ... this.
665 * amd64obsd-nat.c: Rename to ...
666 * amd64-obsd-nat.c: ... this.
667 * amd64obsd-tdep.c: Rename to ...
668 * amd64-obsd-tdep.c: ... this.
669 * amd64-tdep.h: Update comments.
670 * armbsd-tdep.c: Rename to ...
671 * arm-bsd-tdep.c: ... this.
672 * armnbsd-nat.c: Rename to ...
673 * arm-nbsd-nat.c: ... this.
674 * armnbsd-tdep.c: Rename to ...
675 * arm-nbsd-tdep.c: ... this.
676 * armobsd-tdep.c: Rename to ...
677 * arm-obsd-tdep.c: ... this.
678 * arm-tdep.h: Update comments.
679 * hppabsd-tdep.c: Rename to ...
680 * hppa-bsd-tdep.c: ... this, adjust include.
681 * hppabsd-tdep.h: Rename to ...
682 * hppa-bsd-tdep.h: ... this, adjust include barrier and comment.
683 * hppanbsd-nat.c: Rename to ...
684 * hppa-nbsd-nat.c: ... this.
685 * hppanbsd-tdep.c: Rename to ...
686 * hppa-nbsd-tdep.c: ... this, adjust include.
687 * hppaobsd-nat.c: Rename to ...
688 * hppa-obsd-nat.c: ... this.
689 * hppaobsd-tdep.c: Rename to ...
690 * hppa-obsd-tdep.c: ... this, adjust include.
691 * i386bsd-nat.c: Rename to ...
692 * i386-bsd-nat.c: ... this, adjust include.
693 * i386bsd-nat.h: Rename to ...
694 * i386-bsd-nat.h: ... this, adjust include barrier and comment.
695 * i386bsd-tdep.c: Rename to ...
696 * i386-bsd-tdep.c: ... this.
697 * i386fbsd-nat.c: Rename to ...
698 * i386-fbsd-nat.c: ... this, adjust include.
699 * i386fbsd-tdep.c: Rename to ...
700 * i386-fbsd-tdep.c: ... this, adjust include.
701 * i386fbsd-tdep.h: Rename to ...
702 * i386-fbsd-tdep.h: ... this, adjust include barrier and comment.
703 * i386gnu-nat.c: Rename to ...
704 * i386-gnu-nat.c: ... this.
705 * i386gnu-tdep.c: Rename to ...
706 * i386-gnu-tdep.c: ... this.
707 * i386nbsd-nat.c: Rename to ...
708 * i386-nbsd-nat.c: ... this, adjust include.
709 * i386nbsd-tdep.c: Rename to ...
710 * i386-nbsd-tdep.c: ... this.
711 * i386obsd-nat.c: Rename to ...
712 * i386-obsd-nat.c: ... this, adjust include.
713 * i386obsd-tdep.c: Rename to ...
714 * i386-obsd-tdep.c: ... this.
715 * i386v4-nat.c: Rename to ...
716 * i386-v4-nat.c: ... this.
717 * i386-tdep.h: Update comments.
718 * m68k-tdep.h: Update comments.
719 * m68kbsd-nat.c: Rename to ...
720 * m68k-bsd-nat.c: ... this.
721 * m68kbsd-tdep.c: Rename to ...
722 * m68k-bsd-tdep.c: ... this.
723 * m68klinux-nat.c: Rename to ...
724 * m68k-linux-nat.c: ... this.
725 * m68klinux-tdep.c: Rename to ...
726 * m68k-linux-tdep.c: ... this.
727 * m88kbsd-nat.c: Rename to ...
728 * m88k-bsd-nat.c: ... this.
729 * mipsnbsd-nat.c: Rename to ...
730 * mips-nbsd-nat.c: ... this, adjust include.
731 * mipsnbsd-tdep.c: Rename to ...
732 * mips-nbsd-tdep.c: ... this, adjust include.
733 * mipsnbsd-tdep.h: Rename to ...
734 * mips-nbsd-tdep.h: ... this, adjust include barrier and comment.
735 * mips64obsd-nat.c: Rename to ...
736 * mips64-obsd-nat.c: ... this.
737 * mips64obsd-tdep.c: Rename to ...
738 * mips64-obsd-tdep.c: ... this.
739 * ppcfbsd-nat.c: Rename to ...
740 * ppc-fbsd-nat.c: ... this, adjust include.
741 * ppcfbsd-tdep.c: Rename to ...
742 * ppc-fbsd-tdep.c: ... this, adjust include.
743 * ppcfbsd-tdep.h: Rename to ...
744 * ppc-fbsd-tdep.h: ... this, adjust include barrier and comment.
745 * ppcnbsd-nat.c: Rename to ...
746 * ppc-nbsd-nat.c: ... this, adjust include.
747 * ppcnbsd-tdep.c: Rename to ...
748 * ppc-nbsd-tdep.c: ... this, adjust include.
749 * ppcnbsd-tdep.h: Rename to ...
750 * ppc-nbsd-tdep.h: ... this, adjust include barrier and comment.
751 * ppcobsd-nat.c: Rename to ...
752 * ppc-obsd-nat.c: ... this, adjust include.
753 * ppcobsd-tdep.c: Rename to ...
754 * ppc-obsd-tdep.c: ... this, adjust include.
755 * ppcobsd-tdep.h: Rename to ...
756 * ppc-obsd-tdep.h: ... this, adjust include barrier and comment.
757 * shnbsd-nat.c: Rename to ...
758 * sh-nbsd-nat.c: ... this.
759 * shnbsd-tdep.c: Rename to ...
760 * sh-nbsd-tdep.c: ... this.
761 * sparcnbsd-nat.c: Rename to ...
762 * sparc-nbsd-nat.c: ... this.
763 * sparcnbsd-tdep.c: Rename to ...
764 * sparc-nbsd-tdep.c: ... this.
765 * sparcobsd-tdep.c: Rename to ...
766 * sparc-obsd-tdep.c: ... this.
767 * sparc64fbsd-nat.c: Rename to ...
768 * sparc64-fbsd-nat.c: ... this.
769 * sparc64fbsd-tdep.c: Rename to ...
770 * sparc64-fbsd-tdep.c: ... this.
771 * sparc64nbsd-nat.c: Rename to ...
772 * sparc64-nbsd-nat.c: ... this.
773 * sparc64nbsd-tdep.c: Rename to ...
774 * sparc64-nbsd-tdep.c: ... this.
775 * sparc64obsd-nat.c: Rename to ...
776 * sparc64-obsd-nat.c: ... this.
777 * sparc64obsd-tdep.c: Rename to ...
778 * sparc64-obsd-tdep.c: ... this.
779 * sparc64-tdep.h: Update comments.
780 * vaxbsd-nat.c: Rename to ...
781 * vax-bsd-nat.c: ... this.
782 * vaxnbsd-tdep.c: Rename to ...
783 * vax-nbsd-tdep.c: ... this.
784 * vaxobsd-tdep.c: Rename to ...
785 * vax-obsd-tdep.c: ... this.
786 * x86bsd-nat.h: Rename to ...
787 * x86-bsd-nat.h: ... this, adjust include barrier and comment.
788 * x86bsd-nat.c: Rename to ...
789 * x86-bsd-nat.c: ... this, adjust include.
790 * configure.tgt: Update renamed files.
791 * config/alpha/fbsd.mh: Update renamed files.
792 * config/alpha/nbsd.mh: Update renamed files.
793 * config/arm/nbsdelf.mh: Update renamed files.
794 * config/djgpp/fnchange.lst: Update renamed files.
795 * config/i386/fbsd.mh: Update renamed files.
796 * config/i386/fbsd64.mh: Update renamed files.
797 * config/i386/i386gnu.mh: Update renamed files.
798 * config/i386/i386sol2.mh: Update renamed files.
799 * config/i386/nbsd64.mh: Update renamed files.
800 * config/i386/nbsdelf.mh: Update renamed files.
801 * config/i386/obsd.mh: Update renamed files.
802 * config/i386/obsd64.mh: Update renamed files.
803 * config/i386/sol2-64.mh: Update renamed files.
804 * config/m68k/linux.mh: Update renamed files.
805 * config/m68k/nbsdelf.mh: Update renamed files.
806 * config/m68k/obsd.mh: Update renamed files.
807 * config/m88k/obsd.mh: Update renamed files.
808 * config/mips/nbsd.mh: Update renamed files.
809 * config/mips/obsd64.mh: Update renamed files.
810 * config/pa/nbsd.mh: Update renamed files.
811 * config/pa/obsd.mh: Update renamed files.
812 * config/powerpc/fbsd.mh: Update renamed files.
813 * config/powerpc/nbsd.mh: Update renamed files.
814 * config/powerpc/obsd.mh: Update renamed files.
815 * config/sh/nbsd.mh: Update renamed files.
816 * config/sparc/fbsd.mh: Update renamed files.
817 * config/sparc/nbsd64.mh: Update renamed files.
818 * config/sparc/nbsdelf.mh: Update renamed files.
819 * config/sparc/obsd64.mh: Update renamed files.
820 * config/vax/nbsdelf.mh: Update renamed files.
821 * config/vax/obsd.mh: Update renamed files.
823 2016-11-22 Simon Marchi <simon.marchi@polymtl.ca>
825 * Makefile.in: Add comment about file lists ordering.
826 (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
827 SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
828 SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
829 SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
830 SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
831 ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
832 COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
833 Flatten list and order alphabetically.
834 * data-directory/Makefile.in: Add comment about file lists
836 (GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
839 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com>
841 * contrib/expect-read1.sh: Fix spelling in comments.
842 * gdb_buildall.sh: Fix spelling in comments.
843 * gdb_mbuild.sh: Fix spelling in comments.
845 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com>
847 * configure.ac: Fix spelling in comments.
848 * configure: Regenerate.
850 2016-11-22 Yao Qi <yao.qi@linaro.org>
852 * gdbarch.sh (software_single_step): Change parameter from frame_info
854 * gdbarch.c, gdbarch.h: Regenerated.
855 * aarch64-tdep.c (aarch64_software_single_step): Change parameter
856 from frame_info to regcache. Don't call get_current_regcache.
857 * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
858 (alpha_software_single_step): Likewise.
859 * alpha-tdep.h (alpha_software_single_step): Update declaration.
860 * arm-linux-tdep.c (arm_linux_software_single_step): Likewise.
861 * arm-tdep.c (arm_software_single_step): Likewise.
862 * arm-tdep.h (arm_software_single_step): Likewise.
863 * breakpoint.c (insert_single_step_breakpoint): Pass regcache to
864 gdbarch_software_single_step.
865 * cris-tdep.c (cris_software_single_step): Change parameter from
866 frame_info to regcache. Don't call get_current_regcache.
867 * mips-tdep.c (mips_software_single_step): Likewise.
868 * mips-tdep.h (mips_software_single_step): Update declaration.
869 * moxie-tdep.c (moxie_software_single_step): Likewise.
870 * nios2-tdep.c (nios2_software_single_step): Likewise.
871 * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration.
872 * rs6000-aix-tdep.c (rs6000_software_single_step): Likewise.
873 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
874 * s390-linux-tdep.c (s390_software_single_step): Likewise.
875 * sparc-tdep.c (sparc_software_single_step): Likewise.
876 * spu-tdep.c (spu_software_single_step): Likewise.
877 * tic6x-tdep.c (tic6x_software_single_step): Likewise.
879 2016-11-22 Yao Qi <yao.qi@linaro.org>
881 * spu-tdep.c (spu_software_single_step): Call get_regcache_arch
882 instead of get_frame_arch. Call regcache_read_pc instead of
883 get_frame_pc. Call regcache_raw_get_unsigned instead of
884 get_frame_register_unsigned.
886 2016-11-22 Yao Qi <yao.qi@linaro.org>
888 * tic6x-tdep.c (tic6x_condition_true): Replace frame with
889 regcache. Call regcache_raw_get_signed instead of
890 get_frame_register_signed.
891 (tic6x_get_next_pc): Likewise. Caller updated.
893 2016-11-22 Yao Qi <yao.qi@linaro.org>
895 * rs6000-aix-tdep.c (branch_dest): Replace parameter frame with
896 regcache. Call get_regcache_arch instead of get_frame_arch.
897 Call regcache_raw_get_unsigned instead of
898 get_frame_register_unsigned.
899 (rs6000_software_single_step): Likewise.
900 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Call
901 get_regcache_arch instead of get_frame_arch. Call
902 regcache_read_pc instead of get_frame_pc.
904 2016-11-22 Yao Qi <yao.qi@linaro.org>
906 * s390-linux-tdep.c (s390_software_single_step): Call
907 get_regcache_arch instead of get_frame_arch. Call
908 regcache_read_pc instead of get_frame_pc.
910 2016-11-22 Yao Qi <yao.qi@linaro.org>
912 * sparc-tdep.c (sparc_analyze_control_transfer): Replace parameter
913 frame with regcache. Call get_current_frame.
914 (sparc_software_single_step): Call get_regcache_arch instead of
915 get_frame_arch. Call regcache_raw_get_unsigned instead of
916 get_frame_register_unsigned.
918 2016-11-22 Yao Qi <yao.qi@linaro.org>
920 * nios2-tdep.c (nios2_get_next_pc): Replace parameter frame
921 with regcache. Call regcache_raw_get_signed instead of
922 get_frame_register_unsigned.
923 (nios2_software_single_step): Call get_regcache_arch
924 instead of get_frame_arch.
926 2016-11-22 Yao Qi <yao.qi@linaro.org>
928 * moxie-tdep.c (moxie_software_single_step): Call
929 get_regcache_arch instead of get_frame_arch. Call
930 regcache_read_pc instead of get_frame_pc.
932 2016-11-22 Yao Qi <yao.qi@linaro.org>
934 * mips-tdep.c (mips32_bc1_pc): Replace parameter frame with
935 regcache. Call regcache_raw_get_unsigned instead of
936 get_frame_register_unsigned.
937 (mips32_next_pc): Likewise.
938 (micromips_bc1_pc): Likewise.
939 (micromips_next_pc): Likewise.
940 (extended_mips16_next_pc): Likewise.
941 (mips16_next_pc): Likewise.
942 (mips_next_pc): Likewise.
943 (mips_software_single_step): Call get_regcache_arch instead
946 2016-11-22 Yao Qi <yao.qi@linaro.org>
948 * cris-tdep.c (find_step_target): Replace parameter frame
949 with regcache. Call get_regcache_arch instead of
950 get_frame_arch. Call regcache_raw_get_unsigned instead of
951 get_frame_register_unsigned.
952 (cris_software_single_step): Call get_regcache_arch instead
955 2016-11-22 Yao Qi <yao.qi@linaro.org>
957 * alpha-tdep.c (alpha_deal_with_atomic_sequence): Call
958 get_regcache_arch instead of get_frame_arch. Call
959 regcache_read_pc instead of get_frame_pc.
960 (alpha_next_pc): Replace parameter frame with regcache.
961 Call regcache_raw_get_unsigned instead of
962 get_frame_register_unsigned.
964 2016-11-22 Yao Qi <yao.qi@linaro.org>
966 * aarch64-tdep.c (aarch64_software_single_step): Call
967 get_regcache_arch instead of get_frame_arch. Call
968 regcache_read_pc instead of get_frame_pc.
970 2016-11-22 Yao Qi <yao.qi@linaro.org>
972 * regcache.c (regcache_raw_get_signed): New function.
973 * regcache.h (regcache_raw_get_signed): Declare.
975 2016-11-22 Yao Qi <yao.qi@linaro.org>
977 * value.c (value_from_component): Use VALUE_NEXT_FRAME_ID
978 instead of VALUE_FROM_ID.
980 2016-11-21 Simon Marchi <simon.marchi@ericsson.com>
982 * Makefile.in (%o: $(srcdir)/mi/%.c): Add missing POSTCOMPILE
985 2016-11-21 Yao Qi <yao.qi@linaro.org>
987 * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
988 Don't call value_from_contents_and_address and
989 set_value_address. Call value_from_component.
990 * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
992 * value.c (value_from_component): New function.
993 * value.h (value_from_component): Likewise.
994 * valarith.c (value_subscripted_rvalue): Call
995 value_from_component.
997 2016-11-19 Joel Brobecker <brobecker@adacore.com>
999 * contrib/ari/gdb_ari.sh: Add detection of printf_vma and
1002 2016-11-18 Simon Marchi <simon.marchi@polymtl.ca>
1004 * Makefile.in (%.o: $(srcdir)/gdbtk/generic/%.c): Fix typo.
1006 2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
1008 (PYTHON_CFLAGS): Move up.
1009 (%.o: $(srcdir)/arch/%.c): New rule.
1010 (%.o: $(srcdir)/cli/%.c): New rule.
1011 (%.o: $(srcdir)/common/%.c): New rule.
1012 (%.o: $(srcdir)/compile/%.c): New rule.
1013 (%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
1014 (%.o: $(srcdir)/guile/%.c): New rule.
1015 (%.o: $(srcdir)/mi/%.c): New rule.
1016 (%.o: $(srcdir)/nat/%.c): New rule.
1017 (%.o: $(srcdir)/python/%.c): New rule.
1018 (%.o: $(srcdir)/target/%.c): New rule.
1019 (%.o: $(srcdir)/tui/%.c): New rule.
1020 (cli-cmds.o): Remove.
1021 (cli-decode.o): Likewise.
1022 (cli-dump.o): Likewise.
1023 (cli-interp.o): Likewise.
1024 (cli-logging.o): Likewise.
1025 (cli-script.o): Likewise.
1026 (cli-setshow.o): Likewise.
1027 (cli-utils.o): Likewise.
1028 (compile.o): Likewise.
1029 (compile-c-types.o): Likewise.
1030 (compile-c-symbols.o): Likewise.
1031 (compile-object-load.o): Likewise.
1032 (compile-object-run.o): Likewise.
1033 (compile-loc2c.o): Likewise.
1034 (compile-c-support.o): Likewise.
1035 (gdbtk.o): Likewise.
1036 (gdbtk-bp.o): Likewise.
1037 (gdbtk-cmds.o): Likewise.
1038 (gdbtk-hooks.o): Likewise.
1039 (gdbtk-interp.o): Likewise.
1040 (gdbtk-main.o): Likewise.
1041 (gdbtk-register.o): Likewise.
1042 (gdbtk-stack.o): Likewise.
1043 (gdbtk-varobj.o): Likewise.
1044 (gdbtk-wrapper.o): Likewise.
1045 (mi-cmd-break.o): Likewise.
1046 (mi-cmd-catch.o): Likewise.
1047 (mi-cmd-disas.o): Likewise.
1048 (mi-cmd-env.o): Likewise.
1049 (mi-cmd-file.o): Likewise.
1050 (mi-cmd-info.o): Likewise.
1051 (mi-cmds.o): Likewise.
1052 (mi-cmd-stack.o): Likewise.
1053 (mi-cmd-target.o): Likewise.
1054 (mi-cmd-var.o): Likewise.
1055 (mi-console.o): Likewise.
1056 (mi-getopt.o): Likewise.
1057 (mi-interp.o): Likewise.
1058 (mi-main.o): Likewise.
1059 (mi-out.o): Likewise.
1060 (mi-parse.o): Likewise.
1061 (mi-symbol-cmds.o): Likewise.
1062 (mi-common.o): Likewise.
1063 (signals.o): Likewise.
1064 (common-utils.o): Likewise.
1065 (gdb_vecs.o): Likewise.
1066 (xml-utils.o): Likewise.
1068 (buffer.o): Likewise.
1069 (filestuff.o): Likewise.
1070 (format.o): Likewise.
1072 (print-utils.o): Likewise.
1073 (rsp-low.o): Likewise.
1074 (errors.o): Likewise.
1075 (common-debug.o): Likewise.
1076 (cleanups.o): Likewise.
1077 (common-exceptions.o
1078 (posix-strerror.o): Likewise.
1079 (mingw-strerror.o): Likewise.
1080 (btrace-common.o): Likewise.
1081 (fileio.o): Likewise.
1082 (common-regcache.o): Likewise.
1083 (signals-state-save-restore.o): Likewise.
1084 (new-op.o): Likewise.
1085 (waitstatus.o): Likewise.
1087 (arm-linux.o): Likewise.
1088 (arm-get-next-pcs.o): Likewise.
1089 (x86-dregs.o): Likewise.
1090 (linux-btrace.o): Likewise.
1091 (linux-osdata.o): Likewise.
1092 (linux-procfs.o): Likewise.
1093 (linux-ptrace.o): Likewise.
1094 (linux-waitpid.o): Likewise.
1095 (mips-linux-watch.o): Likewise.
1096 (ppc-linux.o): Likewise.
1097 (linux-personality.o): Likewise.
1098 (x86-linux.o): Likewise.
1099 (x86-linux-dregs.o): Likewise.
1100 (amd64-linux-siginfo.o): Likewise.
1101 (linux-namespaces.o): Likewise.
1102 (aarch64-linux-hw-point.o): Likewise.
1103 (aarch64-linux.o): Likewise.
1104 (aarch64-insn.o): Likewise.
1106 (tui-command.o): Likewise.
1107 (tui-data.o): Likewise.
1108 (tui-disasm.o): Likewise.
1109 (tui-file.o): Likewise.
1110 (tui-hooks.o): Likewise.
1111 (tui-interp.o): Likewise.
1112 (tui-io.o): Likewise.
1113 (tui-layout.o): Likewise.
1114 (tui-out.o): Likewise.
1115 (tui-regs.o): Likewise.
1116 (tui-source.o): Likewise.
1117 (tui-stack.o): Likewise.
1118 (tui-win.o): Likewise.
1119 (tui-windata.o): Likewise.
1120 (tui-wingeneral.o): Likewise.
1121 (tui-winsource.o): Likewise.
1122 (guile.o): Likewise.
1123 (scm-arch.o): Likewise.
1124 (scm-auto-load.o): Likewise.
1125 (scm-block.o): Likewise.
1126 (scm-breakpoint.o): Likewise.
1127 (scm-cmd.o): Likewise.
1128 (scm-disasm.o): Likewise.
1129 (scm-exception.o): Likewise.
1130 (scm-frame.o): Likewise.
1131 (scm-gsmob.o): Likewise.
1132 (scm-iterator.o): Likewise.
1133 (scm-lazy-string.o): Likewise.
1134 (scm-math.o): Likewise.
1135 (scm-objfile.o): Likewise.
1136 (scm-param.o): Likewise.
1137 (scm-ports.o): Likewise.
1138 (scm-pretty-print.o): Likewise.
1139 (scm-progspace.o): Likewise.
1140 (scm-safe-call.o): Likewise.
1141 (scm-string.o): Likewise.
1142 (scm-symbol.o): Likewise.
1143 (scm-symtab.o): Likewise.
1144 (scm-type.o): Likewise.
1145 (scm-utils.o): Likewise.
1146 (scm-value.o): Likewise.
1147 (python.o): Likewise.
1148 (py-arch.o): Likewise.
1149 (py-auto-load.o): Likewise.
1150 (py-block.o): Likewise.
1151 (py-bpevent.o): Likewise.
1152 (py-breakpoint.o): Likewise.
1153 (py-cmd.o): Likewise.
1154 (py-continueevent.o): Likewise.
1155 (py-xmethods.o): Likewise.
1156 (py-event.o): Likewise.
1157 (py-evtregistry.o): Likewise.
1158 (py-evts.o): Likewise.
1159 (py-exitedevent.o): Likewise.
1160 (py-finishbreakpoint.o): Likewise.
1161 (py-frame.o): Likewise.
1162 (py-framefilter.o): Likewise.
1163 (py-function.o): Likewise.
1164 (py-gdb-readline.o): Likewise.
1165 (py-inferior.o): Likewise.
1166 (py-infevents.o): Likewise.
1167 (py-infthread.o): Likewise.
1168 (py-lazy-string.o): Likewise.
1169 (py-linetable.o): Likewise.
1170 (py-newobjfileevent.o): Likewise.
1171 (py-objfile.o): Likewise.
1172 (py-param.o): Likewise.
1173 (py-prettyprint.o): Likewise.
1174 (py-progspace.o): Likewise.
1175 (py-signalevent.o): Likewise.
1176 (py-stopevent.o): Likewise.
1177 (py-symbol.o): Likewise.
1178 (py-symtab.o): Likewise.
1179 (py-threadevent.o): Likewise.
1180 (py-type.o): Likewise.
1181 (py-unwind.o): Likewise.
1182 (py-utils.o): Likewise.
1183 (py-value.o): Likewise.
1184 (py-varobj.o): Likewise.
1186 2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
1188 * Makefile.in (.c.o): Replace rule with ...
1189 (%.o: %.c): ... this one.
1190 (.po.gmo): Replace rule with ...
1191 (%.gmo: %.po): ... this one.
1192 (.po.pox): Replace rule with ...
1193 (%.pox: %.po): ... this one.
1194 (.y.c): Replace rule with ...
1195 (%.c: %.y): ... this one.
1196 (.l.c): Replace rule with ...
1197 (%.c: %.l): ... this one.
1198 (.SUFFIXES): Remove all instances.
1200 2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
1202 * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
1203 prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
1205 * configure.ac: Remove checks for the make program.
1206 * configure: Re-generate.
1208 2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
1210 * NEWS: Mention requirement of GNU make.
1212 2016-11-17 Pedro Alves <palves@redhat.com>
1214 * c-exp.y (c_print_token): Use parser_fprintf instead of fprintf.
1216 2016-11-17 Pedro Alves <palves@redhat.com>
1218 * ctf.c [USE_WIN32API] (mkdir): Delete.
1220 2016-11-16 Pedro Alves <palves@redhat.com>
1222 * ada-lang.c (ada_value_primitive_packed_val): Use unique_ptr and
1223 new gdb_byte[] instead of malloc and cleanups.
1225 2016-11-17 Pedro Alves <palves@redhat.com>
1227 * tracepoint.c (collection_list::add_memrange): Add gdbarch
1228 parameter. Use paddress instead of printf_vma. Adjust recursive
1230 (collection_list::stringify): Use paddress and phex_nz instead of
1231 sprintf_vma. Adjust add_memrange call.
1232 * tracepoint.h (collection_list::add_memrange): Add gdbarch
1235 2016-11-16 Kevin Buettner <kevinb@redhat.com>
1237 * frame.c (get_prev_frame): Stash frame id for current frame
1238 prior to computing frame id for previous frame.
1240 2016-11-16 Kevin Buettner <kevinb@redhat.com>
1242 * python/py-unwind.c (pending_framepy_read_register): Use
1243 value_of_register() instead of get_frame_register_value().
1245 2016-11-16 Kevin Buettner <kevinb@redhat.com>
1247 * value.h (VALUE_FRAME_ID): Rename to VALUE_NEXT_FRAME_ID. Update
1248 comment. Create new VALUE_FRAME_ID which is defined in terms of
1249 VALUE_NEXT_FRAME_ID.
1250 (deprecated_value_frame_id_hack): Rename to
1251 deprecated_value_next_frame_id_hack.
1252 * dwarf2loc.c, findvar.c, frame-unwind.c, sentinel-frame.c,
1253 valarith.c, valops.c, value.c: Adjust nearly all occurences of
1254 VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID. Add comments for those
1255 which did not change.
1256 * value.c (struct value): Rename frame_id field to next_frame_id.
1258 (deprecated_value_frame_id_hack): Rename to
1259 deprecated_value_next_frame_id_hack.
1260 (value_fetch_lazy): Call frame_unwind_register_value()
1261 instead of get_frame_register_value().
1262 * frame.c (get_prev_frame_id_by_id): New function.
1263 * frame.h (get_prev_frame_id_by_id): Declare.
1264 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Make
1265 VALUE_NEXT_FRAME_ID refer to the next frame.
1266 * findvar.c (value_of_register_lazy): Likewise.
1267 (default_value_from_register): Likewise.
1268 (value_from_register): Likewise.
1269 * frame_unwind.c (frame_unwind_got_optimized): Likewise.
1270 * sentinel-frame.c (sentinel_frame_prev_register): Likewise.
1271 * value.h (VALUE_FRAME_ID): Update comment describing this macro.
1273 2016-11-16 Kevin Buettner <kevinb@redhat.com>
1275 * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL.
1276 (struct frame_id): Increase number of bits required for storing
1277 stack status to 3 from 2.
1278 (sentinel_frame_id): New declaration.
1279 (get_next_frame_sentinel_okay): Declare.
1280 (frame_find_by_id_sentinel_okay): Declare.
1281 * frame.c (current_frame): Rename this static global to...
1282 (sentinel_frame): ...this static global, which has also been
1283 moved an earlier location in the file.
1284 (fprint_frame_id): Add case for sentinel frame id.
1285 (get_frame_id): Return early for sentinel frame.
1286 (sentinel_frame_id): Define.
1287 (frame_find_by_id): Add case for sentinel_frame_id.
1288 (create_sentinel_frame): Use sentinel_frame_id for this_id.value
1289 instead of null_frame_id.
1290 (get_current_frame): Add local declaration for `current_frame'.
1291 Remove local declaration for `sentinel_frame.'
1292 (get_next_frame_sentinel_okay): New function.
1293 (reinit_frame_cache): Use `sentinel_frame' in place of
1296 2016-11-15 Pedro Alves <palves@redhat.com>
1298 * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
1299 38237baf99386101934cd93278023aa4ae523ec0.
1300 * gnulib/configure, gnulib/config.in: Regenerate.
1301 * gnulib/import/Makefile.am: Regenerate.
1302 * gnulib/import/Makefile.in: Regenerate.
1303 * gnulib/import/canonicalize-lgpl.c: Update.
1304 * gnulib/import/extra/snippet/c++defs.h: Update.
1305 * gnulib/import/m4/stdint.m4: Update.
1306 * gnulib/import/m4/stdlib_h.m4: Update.
1307 * gnulib/import/math.in.h: Update.
1308 * gnulib/import/stdlib.in.h: Update.
1309 * gnulib/import/sys_time.in.h: Update.
1311 2016-11-15 Pedro Alves <palves@redhat.com>
1313 * common/common-defs.h: Update comment.
1314 * common/gdb_unique_ptr.h: Update header comment and copyright
1316 (gdb::unique_ptr, gdb::move): Delete.
1318 2016-11-15 Pedro Alves <palves@redhat.com>
1320 * ada-lang.c (create_excep_cond_exprs): Use std::move instead of
1322 * break-catch-throw.c (handle_gnu_v3_exceptions): Use
1323 std::unique_ptr instead of gdb::unique_ptr.
1324 * breakpoint.c (watch_command_1): Use std::move instead of
1326 * cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
1327 std::unique_ptr instead of gdb::unique_ptr.
1328 * dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
1330 * elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
1331 instead of gdb::unique_ptr.
1332 * mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
1333 instead of gdb::unique_ptr.
1334 * parse.c (parse_expression_for_completion): Use std::move instead
1336 * printcmd.c (display_command): std::move instead of gdb::move.
1338 2016-11-14 Markus Metzger <markus.t.metzger@intel.com>
1340 * nat/linux-btrace.c (perf_event_read): Allow data_head < size.
1341 * nat/linux-btrace.c (perf_event_read_all): Do not adjust size.
1343 2016-11-12 Tom Tromey <tom@tromey.com>
1345 * rust-exp.y (super_name): Use std::vector.
1346 (lex_number): Use std::string.
1347 (convert_params_to_types): Return std::vector.
1348 (convert_ast_to_type, convert_name): Update.
1349 * rust-lang.c (rust_get_disr_info): Use unique_xmalloc_ptr.
1351 2016-11-12 Tom Tromey <tom@tromey.com>
1353 * rust-lang.c (rust_get_disr_info): Use std::string in one more
1356 2016-11-11 Yao Qi <yao.qi@linaro.org>
1358 * spu-tdep.c (spu_software_single_step): Don't call
1359 get_frame_register_bytes, call get_frame_register_unsigned
1362 2016-11-11 Yao Qi <yao.qi@linaro.org>
1364 * cp-valprint.c (cp_print_value): Remove local base_valaddr.
1365 * extension-priv.h (struct extension_language_ops)
1366 <apply_val_pretty_printer>: Remove the second parameter.
1367 Remove const from "struct value *". Callers updated.
1368 * extension.c (apply_ext_lang_val_pretty_printer): Update
1369 comments. Remove parameter valaddr. Remove const from
1371 * extension.h (apply_ext_lang_val_pretty_printer): Update
1373 * guile/guile-internal.h (gdbscm_apply_val_pretty_printer):
1375 * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
1376 Remove parameter valaddr. Remove const from "struct value *".
1377 * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
1379 * python/python-internal.h (gdbpy_apply_val_pretty_printer):
1382 2016-11-11 Yao Qi <yao.qi@linaro.org>
1384 * c-lang.h (cp_print_value_fields): Update declaration.
1385 * cp-valprint.c (cp_print_value): Update declaration.
1386 (cp_print_value_fields): Remove parameter valaddr. Callers
1388 (cp_print_value): Likewise.
1390 2016-11-09 Tom Tromey <tom@tromey.com>
1392 * varobj.h (varobj_get_display_hint): Change return type.
1393 * varobj.c (varobj_get_display_hint): Return unique_xmalloc_ptr.
1394 (varobj_value_get_print_value): Update.
1395 * python/python.c (gdbpy_before_prompt_hook, gdbpy_print_stack)
1396 (gdbpy_apply_type_printers): Update.
1397 * python/python-internal.h (unicode_to_target_string)
1398 (python_string_to_target_string, python_string_to_host_string)
1399 (gdbpy_obj_to_string, gdbpy_exception_to_string)
1400 (gdbpy_get_display_hint): Change return types.
1401 * python/py-varobj.c (py_varobj_iter_next): Update.
1402 * python/py-value.c (valpy_getitem, convert_value_from_python):
1404 * python/py-utils.c (unicode_to_encoded_string)
1405 (unicode_to_target_string, python_string_to_target_string)
1406 (python_string_to_host_string, gdbpy_obj_to_string)
1407 (gdbpy_exception_to_string): Return unique_xmalloc_ptr.
1408 * python/py-unwind.c (pyuw_parse_register_id): Update.
1409 * python/py-type.c (typy_getitem): Update.
1410 * python/py-prettyprint.c (gdbpy_get_display_hint)
1411 (print_stack_unless_memory_error, print_children)
1412 (gdbpy_apply_val_pretty_printer): Update.
1413 * python/py-param.c (set_parameter_value): Update.
1414 (get_doc_string, call_doc_function): Return unique_xmalloc_ptr.
1415 (get_set_value, get_show_value, compute_enum_values, parmpy_init):
1417 * python/py-infthread.c (thpy_set_name): Update.
1418 * python/py-function.c (fnpy_call, fnpy_init): Update.
1419 * python/py-framefilter.c (extract_sym): Change "name" to
1421 (enumerate_args, enumerate_locals): Update.
1422 (py_print_frame): Use unique_xmalloc_ptr.
1423 * python/py-frame.c (frapy_read_var): Update. Remove cleanup.
1424 * python/py-cmd.c (cmdpy_function, cmdpy_completer, cmdpy_init):
1426 * python/py-breakpoint.c (bppy_set_condition): Use
1428 (bppy_init): Likewise. Remove cleanup.
1429 (local_setattro): Update.
1430 * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_list_children)
1431 (varobj_update_one): Update.
1433 2016-11-09 Pedro Alves <palves@redhat.com>
1435 * ax-gdb.c (agent_eval_command_one): Use std::move instead of
1437 * ax.h (agent_expr_up): Use std::unique_ptr instead of
1439 * breakpoint.c (parse_cond_to_aexpr): Use std::move instead of
1441 * tracepoint.c (collection_list::collect_symbol): Likewise.
1442 (collection_list::~collection_list): Delete.
1443 (encode_actions_1): Use std::move instead of gdb::move.
1444 (collection_list::add_aexpr): Use std::move instead of
1445 unique_ptr::release.
1446 * tracepoint.h (collection_list) <~collection_list>: Delete
1448 <m_aexprs>: Now a vector of agent_ptr_up.
1450 2016-11-09 Pedro Alves <palves@redhat.com>
1452 * main.c (struct cmdarg): Add constructor.
1453 (captured_main_1): Use vector::emplace_back.
1454 * tracepoint.c (collection_list::add_memrange): Likewise.
1456 2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
1458 * tui/tui-winsource.c (tui_alloc_source_buffer): Remove
1459 failed-xmalloc handling.
1461 2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
1463 * tui/tui-winsource.c (tui_alloc_source_buffer): Subtract
1464 highlight box's overhead when calculating the content height.
1466 2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
1468 * tui/tui-disasm.c (tui_set_disassem_content): Fix calculation of
1469 the longest disassembly line's length.
1471 2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
1473 * tui/tui-disasm.c (tui_set_disassem_content): Fix line buffer
1474 overrun due to unchecked strcpy.
1476 2016-11-09 Tristan Gingold <gingold@adacore.com>
1478 * darwin-nat.c (find_inferior_task_it): Fix indentation.
1479 (find_inferior_notify_it): Remove.
1480 (find_inferior_pid_it): New function.
1481 (darwin_find_inferior_by_notify): Remove.
1482 (darwin_find_inferior_by_pid): New function.
1483 (darwin_find_new_inferior): New function.
1484 (darwin_check_message_ndr): New function from
1485 darwin_decode_exception_message.
1486 (darwin_decode_exception_message): Call darwin_check_message_ndr.
1487 Handle SIGTRAP addressed to an unknown task (when a task spawned).
1488 (darwin_decode_notify_message): New function.
1489 (darwin_decode_message): Handle unknown task.
1490 (darwin_deallocate_threads): New function from darwin_mourn_inferior.
1491 (darwin_mourn_inferior): Use darwin_deallocate_threads and
1492 darwin_deallocate_exception_ports.
1493 (darwin_deallocate_exception_ports): New function from
1494 darwin_mourn_inferior.
1495 (darwin_setup_exceptions): New function from darwin_attach_pid.
1496 (darwin_setup_request_notification): Likewise.
1497 (darwin_attach_pid): Call darwin_setup_request_notification and
1498 darwin_setup_request_notification.
1500 2016-11-08 Tom Tromey <tom@tromey.com>
1502 * python/py-framefilter.c (py_print_frame): Use
1503 get_addr_from_python. Check for errors when getting line number.
1505 2016-11-08 Yao Qi <yao.qi@linaro.org>
1507 * ada-lang.h (ada_val_print): Remove second parameter. Remove
1508 const from "struct value *".
1509 * ada-valprint.c (print_field_values): Remove const from
1511 (val_print_packed_array_elements): Likewise.
1512 (print_variant_part): Likewise.
1513 (ada_val_print_string): Likewise.
1514 (ada_val_print_gnat_array): Likewise.
1515 (ada_val_print_ptr): Likewise.
1516 (ada_val_print_num): Likewise.
1517 (ada_val_print_enum): Likewise.
1518 (ada_val_print_flt): Likewise.
1519 (ada_val_print_union): Likewise.
1520 (ada_val_print_struct_union): Likewise.
1521 (ada_val_print_ref): Likewise.
1522 (ada_val_print_1): Remove second parameter. Remove const from
1524 (ada_val_print): Likewise.
1525 * c-lang.h (c_val_print): Likewise.
1526 * c-valprint.c (c_val_print_array): Remove const from
1528 (c_val_print_ptr): Likewise.
1529 (c_val_print_struct): Likewise.
1530 (c_val_print_union): Likewise.
1531 (c_val_print_int): Likewise.
1532 (c_val_print_memberptr): Likewise.
1533 (c_val_print): Remove second parameter. Remove const from
1534 "struct value *". All callers updated.
1535 * cp-valprint.c (cp_print_value): Remove const from
1537 (cp_print_value_fields): Likewise.
1538 (c_val_print_value): Likewise.
1539 * d-lang.h (d_val_print): Remove second parameter. Remove const
1540 from "struct value *".
1541 * d-valprint.c (dynamic_array_type): Likewise.
1542 (d_val_print): Likewise.
1543 * f-lang.h (f_val_print): Likewise.
1544 * f-valprint.c (f_val_print): Likewise.
1545 * go-lang.h (go_val_print): Likewise.
1546 * go-valprint.c (print_go_string): Likewise.
1547 (go_val_print): Likewise.
1548 * language.c (unk_lang_val_print): Likewise.
1549 * language.h (struct language_defn) <la_val_print>: Likewise.
1551 (LA_VAL_PRINT): Remove.
1552 * m2-lang.h (m2_val_print): Remove const from
1554 * m2-valprint.c (m2_print_array_contents): Likewise.
1555 (m2_val_print): Likewise.
1556 * p-lang.h (pascal_val_print): Remove second parameter. Remove
1557 const from "struct value *".
1558 (pascal_object_print_value_fields): Likewise.
1559 * p-valprint.c (pascal_val_print): Likewise.
1560 (pascal_object_print_value_fields): Likewise.
1561 (pascal_object_print_value): Likewise.
1562 * rust-lang.c (rust_get_disr_info): Likewise.
1563 (val_print_struct): Likewise.
1564 (rust_val_print): Likewise.
1565 * valprint.c (generic_val_print_array): Likewise.
1566 (generic_val_print_ptr): Likewise.
1567 (generic_val_print_memberptr): Likewise.
1568 (generic_val_print_ref): Likewise.
1569 (generic_val_print_enum): Likewise.
1570 (generic_val_print_flags): Likewise.
1571 (generic_val_print_func): Likewise.
1572 (generic_val_print_bool): Likewise.
1573 (generic_val_print_int): Likewise.
1574 (generic_val_print_char): Likewise.
1575 (generic_val_print_float): Likewise.
1576 (generic_val_print_decfloat): Likewise.
1577 (generic_val_print_complex): Likewise.
1578 (generic_val_print): Likewise.
1579 (val_print): Likewise.
1580 (common_val_print): Likewise.
1581 (val_print_type_code_flags): Likewise.
1582 (val_print_scalar_formatted): Likewise.
1583 (val_print_array_elements): Likewise.
1584 * valprint.h (val_print_array_elements): Update declaration.
1585 (val_print_scalar_formatted): Likewise.
1586 (generic_val_print): Likewise.
1587 * value.h (val_print): Likewise.
1589 2016-11-08 Yao Qi <yao.qi@linaro.org>
1591 * mt-tdep.c (mt_registers_info): Call
1592 get_frame_register_value instead of
1593 deprecated_frame_register_read.
1594 * sh64-tdep.c (sh64_do_register): Likewise.
1596 2016-11-08 Pedro Alves <palves@redhat.com>
1598 * ax.h (agent_expr_p): Delete.
1599 (DEF_VEC_P (agent_expr_p)): Delete.
1600 * breakpoint.c (build_target_condition_list)
1601 (build_target_command_list): Adjust to use of std::vector.
1602 (bp_location_dtor): Remove now unnecessary VEC_free calls.
1603 * breakpoint.h: Include <vector>.
1604 (struct bp_target_info) <conditions, tcommands>: Now
1606 * remote.c (remote_add_target_side_condition): bp_tgt->conditions
1607 is now a std::vector; adjust.
1608 (remote_add_target_side_commands, remote_insert_breakpoint):
1609 bp_tgt->tcommands is now a std::vector; adjust.
1611 2016-11-08 Pedro Alves <palves@redhat.com>
1613 * ax-gdb.c (is_nontrivial_conversion): Use agent_expr_up.
1614 (gen_trace_for_var, gen_trace_for_expr, gen_eval_for_expr)
1615 (gen_trace_for_return_address, gen_printf): Use and return an
1616 agent_expr_up. Don't use make_cleanup_free_agent_expr.
1617 (agent_eval_command_one, maint_agent_printf_command): Use
1618 agent_expr_up. Don't use make_cleanup_free_agent_expr.
1619 * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
1620 (gen_trace_for_return_address, gen_eval_for_expr, gen_printf): Use
1622 * ax-general.c (new_agent_expr): Rename to ...
1623 (agent_expr::agent_expr): ... this, and now a constructor.
1624 (free_agent_expr): Rename to ...
1625 (agent_expr::~agent_exp): ... this, and now a destructor.
1626 (do_free_agent_expr_cleanup, make_cleanup_free_agent_expr):
1628 * ax.h (struct agent_expr): Add ctor/dtor.
1629 (agent_expr_up): New typedef.
1630 (new_agent_expr, free_agent_expr, make_cleanup_free_agent_expr):
1631 Delete declarations.
1632 * breakpoint.c (parse_cond_to_aexpr): Use and return an
1633 agent_expr_up. Don't use make_cleanup_free_agent_expr.
1634 (build_target_condition_list): Adjust to use agent_expr_up.
1635 (parse_cmd_to_aexpr): Use and return an agent_expr_up. Don't use
1636 make_cleanup_free_agent_expr.
1637 (build_target_command_list): Adjust to use agent_expr_up.
1638 (force_breakpoint_reinsertion): Adjust to use agent_expr_up.
1639 (bp_location_dtor): Remove unnecessary free_agent_expr and xfree
1641 * breakpoint.h (struct bp_target_info) <cond_bytecode,
1642 cmd_bytecode>: Now agent_expr_up's.
1643 * remote.c (remote_download_tracepoint): Adjust to use
1644 agent_expr_up and remove use of make_cleanup_free_agent_expr.
1645 * tracepoint.c (validate_actionline, collect_symbol): Adjust to
1646 use agent_expr_up and remove uses of make_cleanup_free_agent_expr.
1647 (collection_list::~collection_list): Call delete instead of
1649 (encode_actions_1): Adjust to use agent_expr_up and remove uses of
1650 make_cleanup_free_agent_expr.
1651 (add_aexpr): Change parameter type to agent_expr_up; Return a raw
1654 2016-11-08 Pedro Alves <palves@redhat.com>
1656 * ada-lang.c (ada_name_for_lookup, type_as_string): Use and return
1658 (type_as_string_and_cleanup): Delete.
1659 (ada_lookup_struct_elt_type): Use type_as_string.
1660 * ada-lang.h (ada_name_for_lookup): Now returns std::string.
1661 * ada-varobj.c (ada_varobj_scalar_image): Return a std::string.
1662 (ada_varobj_describe_child): Make 'child_name' and
1663 'child_path_expr' parameters std::string pointers.
1664 (ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child):
1665 Likewise, and use string_printf.
1666 (ada_varobj_describe_simple_array_child)
1667 (ada_varobj_describe_child): Likewise.
1668 (ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child)
1669 (ada_varobj_get_value_image)
1670 (ada_varobj_get_value_of_array_variable)
1671 (ada_varobj_get_value_of_variable, ada_name_of_variable)
1672 (ada_name_of_child, ada_path_expr_of_child)
1673 (ada_value_of_variable): Now returns std::string. Use
1675 (ada_value_of_child): Adjust.
1676 * break-catch-throw.c (check_status_exception_catchpoint): Adjust
1678 * breakpoint.c (watch_command_1): Adjust to use std::string.
1679 * c-lang.c (c_get_string): Adjust to use std::string.
1680 * c-typeprint.c (print_name_maybe_canonical): Use std::string.
1681 * c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string
1683 (c_name_of_variable): Now returns a std::string.
1684 (c_describe_child): The 'cname' and 'cfull_expression' output
1685 parameters are now std::string pointers. Adjust.
1686 (c_name_of_child, c_path_expr_of_child, c_value_of_variable)
1687 (cplus_number_of_children): Adjust to use std::string and
1689 (cplus_name_of_variable): Now returns a std::string.
1690 (cplus_describe_child): The 'cname' and 'cfull_expression' output
1691 parameters are now std::string pointers. Adjust.
1692 (cplus_name_of_child, cplus_path_expr_of_child)
1693 (cplus_value_of_variable): Now returns a std::string.
1694 * cp-abi.c (cplus_typename_from_type_info): Return std::string.
1695 * cp-abi.h (cplus_typename_from_type_info): Return std::string.
1696 (struct cp_abi_ops) <get_typename_from_type_info>: Return
1698 * cp-support.c (inspect_type): Use std::string.
1699 (cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs)
1700 (cp_canonicalize_string): Return std::string and adjust.
1701 * cp-support.h (cp_canonicalize_string)
1702 (cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full):
1704 * dbxread.c (read_dbx_symtab): Use std::string.
1705 * dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string.
1706 * gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string.
1707 * gnu-v3-abi.c (gnuv3_get_typeid): Use std::string.
1708 (gnuv3_get_typename_from_type_info): Return a std::string and
1710 (gnuv3_get_type_from_type_info): Adjust to use std::string.
1711 * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
1713 * infcmd.c (print_return_value_1): Adjust to use std::string.
1714 * linespec.c (find_linespec_symbols): Adjust to
1715 demangle_for_lookup API change. Use std::string.
1716 * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format)
1717 (mi_cmd_var_info_type, mi_cmd_var_info_path_expression)
1718 (mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression)
1719 (mi_cmd_var_assign, varobj_update_one): Adjust to use std::string.
1720 * minsyms.c (lookup_minimal_symbol): Use std::string.
1721 * python/py-varobj.c (py_varobj_iter_next): Use new instead of
1722 XNEW. vitem->name is a std::string now, adjust.
1723 * rust-exp.y (convert_ast_to_type, convert_name): Adjust to use
1725 * stabsread.c (define_symbol): Adjust to use std::string.
1726 * symtab.c (demangle_for_lookup): Now returns 'const char *'. Add
1727 a demangle_result_storage parameter. Use it for storage.
1728 (lookup_symbol_in_language)
1729 (lookup_symbol_in_objfile_from_linkage_name): Adjust to new
1730 demangle_for_lookup API.
1731 * symtab.h (struct demangle_result_storage): New type.
1732 (demangle_for_lookup): Now returns 'const char *'. Add a
1733 demangle_result_storage parameter.
1734 * typeprint.c (type_to_string): Return std::string and use
1736 * value.h (type_to_string): Change return type to std::string.
1737 * varobj-iter.h (struct varobj_item) <name>: Now a std::string.
1738 (varobj_iter_delete): Use delete instead of xfree.
1739 * varobj.c (create_child): Return std::string instead of char * in
1741 (name_of_variable, name_of_child, my_value_of_variable): Return
1742 std::string instead of char *.
1743 (varobj_create, varobj_get_handle): Constify 'objname' parameter.
1744 Adjust to std::string fields.
1745 (varobj_get_objname): Return a const char * instead of a char *.
1746 (varobj_get_expression): Return a std::string.
1747 (varobj_list_children): Adjust to use std::string.
1748 (varobj_get_type): Return a std::string.
1749 (varobj_get_path_expr): Return a const char * instead of a char *.
1750 Adjust to std::string fields.
1751 (varobj_get_formatted_value, varobj_get_value): Return a
1753 (varobj_set_value): Change type of 'expression' parameter to
1754 std::string. Use std::string.
1755 (install_new_value): Use std::string.
1756 (delete_variable_1): Adjust to use std::string.
1757 (create_child): Change the 'name' parameter to a std::string
1758 reference. Swap it into the new item's name.
1759 (create_child_with_value): Swap item's name into the new child's
1760 name. Use string_printf.
1761 (new_variable): Use new instead of XNEW.
1762 (free_variable): Don't xfree fields that are now std::string.
1763 (name_of_variable, name_of_child): Now returns std::string.
1764 (value_of_root): Adjust to use std::string.
1765 (my_value_of_variable, varobj_value_get_print_value): Return
1766 and use std::string.
1767 (varobj_value_get_print_value): Adjust to use ui_file_as_string
1769 * varobj.h (struct varobj) <name, path_expr, obj_name,
1770 print_value>: Now std::string's.
1771 <name_of_variable, name_of_child, path_expr_of_child,
1772 value_of_variable>: Return std::string.
1773 (varobj_create, varobj_get_handle): Constify 'objname' parameter.
1774 (varobj_get_objname): Return a const char * instead of a char *.
1775 (varobj_get_expression, varobj_get_type): Return a std::string.
1776 (varobj_get_path_expr): Return a const char * instead of a char *.
1777 (varobj_get_formatted_value, varobj_get_value): Return a
1779 (varobj_set_value): Constify 'expression' parameter.
1780 (varobj_value_get_print_value): Return a std::string.
1782 2016-11-08 Pedro Alves <palves@redhat.com>
1784 * language.c (add_language): Use ui_file_as_string and adjust to
1787 2016-11-08 Pedro Alves <palves@redhat.com>
1788 Tom Tromey <tom@tromey.com>
1790 * rust-lang.c (struct disr_info) <name>: Now a std::string.
1791 (rust_get_disr_info): Use ui_file_as_string and adjust to use
1793 (rust_val_print): Adjust to use std::string.
1795 2016-11-08 Pedro Alves <palves@redhat.com>
1797 * infrun.c (print_target_wait_results): Use ui_file_as_string and
1800 2016-11-08 Pedro Alves <palves@redhat.com>
1802 * ada-lang.c (type_as_string): Use ui_file_as_string and return
1804 (type_as_string_and_cleanup): Delete.
1805 (ada_lookup_struct_elt_type): Use type_as_string.
1807 2016-11-08 Pedro Alves <palves@redhat.com>
1809 * gdbarch.sh (verify_gdbarch): Use ui_file_as_string and
1811 * gdbarch.c: Regenerate.
1813 2016-11-08 Pedro Alves <palves@redhat.com>
1815 * c-exp.y (OPERATOR NEW): Adjust to use ui_file_as_string and
1818 2016-11-08 Pedro Alves <palves@redhat.com>
1820 * c-lang.h (c_compute_program): Now returns std::string.
1821 * compile/compile-internal.h (class compile_file_names): New
1823 * compile/compile-object-load.c (compile_object_load): Replace
1824 object_file and source_file parameters with a compile_file_names
1826 * compile-object-load.h: Include "compile-internal.h".
1827 (compile_object_load): Replace object_file and source_file
1828 parameters with a compile_file_names parameter.
1829 * compile/compile-c-support.c (c_compute_program): Now returns a
1830 std::string. Use ui_file_as_string.
1831 * compile/compile.c (get_new_file_names): Remove parameters and
1832 return a compile_file_names instead.
1833 (compile_to_object): Now returns a compile_file_names. Use
1835 (eval_compile_command): Use compile_file_names.
1836 * language.h (struct language_defn) <la_compute_program>: Now
1837 returns std::string.
1839 2016-11-08 Pedro Alves <palves@redhat.com>
1841 * cli/cli-setshow.c (do_show_command): Adjust to use
1842 ui_file_as_string and std::string.
1844 2016-11-08 Pedro Alves <palves@redhat.com>
1846 * remote.c (escape_buffer): Use ui_file_as_string and return
1848 (putpkt_binary, read_frame): Adjust to use std::string.
1850 2016-11-08 Pedro Alves <palves@redhat.com>
1852 * python/py-arch.c (archpy_disassemble): Use ui_file_as_string and
1854 * python/py-breakpoint.c (bppy_get_commands): Use
1855 ui_file_as_string and std::string.
1856 * python/py-frame.c (frapy_str): Likewise.
1857 * python/py-type.c (typy_str): Likewise.
1858 * python/py-unwind.c (unwind_infopy_str): Likewise.
1859 * python/py-value.c (valpy_str): Likewise.
1861 2016-11-08 Pedro Alves <palves@redhat.com>
1863 * printcmd.c (eval_command): Use ui_file_as_string and
1866 2016-11-08 Pedro Alves <palves@redhat.com>
1868 * top.c (quit_confirm): Use ui_file_as_string and std::string.
1870 2016-11-08 Pedro Alves <palves@redhat.com>
1872 * gdbcmd.h (execute_command_to_string): Now returns std::string.
1873 (lookup_struct_elt_type): Adjust to use std::string.
1874 * top.c (execute_command_to_string): Use ui_file_as_string and
1876 * guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
1878 * python/python.c (execute_gdb_command): Adjust to use
1881 2016-11-08 Pedro Alves <palves@redhat.com>
1883 * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
1884 ui_file_as_string and adjust to use std::string.
1885 * guile/scm-disasm.c (gdbscm_arch_disassemble): Likewise.
1886 * guile/scm-frame.c (frscm_print_frame_smob): Likewise.
1887 * guile/scm-type.c (tyscm_type_name): Use ui_file_as_string and
1888 adjust to use std::string. Throw exception directly instead of
1889 returning it in EXCP output parameter.
1890 (tyscm_print_type_smob, gdbscm_type_print_name): Adjust to
1891 tyscm_type_name interface change.
1892 * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
1893 Use ui_file_as_string and std::string.
1895 2016-11-08 Pedro Alves <palves@redhat.com>
1897 * arm-tdep.c (_initialize_arm_tdep): Use ui_file_as_string and
1900 2016-11-08 Pedro Alves <palves@redhat.com>
1902 * utils.c (error_stream): Use ui_file_as_string and std::string.
1904 2016-11-08 Pedro Alves <palves@redhat.com>
1906 * ui-out.c (ui_out_field_stream): Use ui_file_as_string.
1908 2016-11-08 Pedro Alves <palves@redhat.com>
1910 * ada-valprint.c (ada_print_floating): Use ui_file_as_string and
1913 2016-11-08 Pedro Alves <palves@redhat.com>
1915 * xtensa-tdep.c (xtensa_verify_config): Use ui_file_as_string and
1918 2016-11-08 Pedro Alves <palves@redhat.com>
1920 * dwarf2read.c (dwarf2_compute_name): Use ui_file_as_string and
1923 2016-11-08 Pedro Alves <palves@redhat.com>
1925 * mi/mi-main.c (print_variable_or_computed): Constify 'expression'
1927 (mi_cmd_trace_frame_collected): Call encode_actions instead of
1928 encode_actions_and_make_cleanup. Adjust to use std::vector.
1929 * tracepoint.c (memrange_cmp): Delete.
1930 (memrange_comp): New.
1931 (memrange_sortmerge): Take a memrange vector as parameter instead
1932 of a collection_list. Use std::sort instead of qsort.
1933 (add_register): Now a method of collection_list. Adjust to m_
1934 prefix of data fields.
1935 (add_memrange): Now a method of collection_list. Adjust to m_
1936 prefix of data fields. Adjust to use std::vector.
1937 (collect_symbol): Now a method of collection_list. Adjust to m_
1938 prefix of data fields.
1939 (do_collect_symbol): Adjust. Call add_wholly_collected instead of
1940 accessing the vector directly.
1941 (collection_list::add_wholly_collected): New.
1942 (add_local_symbols): Now a method of collection_list.
1943 (add_static_trace_data): Now a method of collection_list. Adjust
1945 (clear_collection_list, do_clear_collection_list): Delete.
1946 (init_collection_list): Delete.
1947 (collection_list::collection_list): New.
1948 (collection_list::~collection_list): New.
1949 (stringify_collection_list): Rename to ...
1950 (collection_list::stringify): ... this and adjust to being a
1951 method of collection_list. Adjust to use of std::vector.
1952 (append_exp): Now a method of collection_list. Use
1953 ui_file_as_string. Adjust to std::vector.
1954 (collection_list::finish): New.
1955 (encode_actions_1): Adjust.
1956 (encode_actions_and_make_cleanup): Rename to ...
1957 (encode_actions)... this. No longer returns a cleanup. No longer
1958 call init_collection_list nor install do_clear_collection_list
1959 cleanups. Call collection_list::finish instead of
1960 memrange_sortmerge directly.
1961 (encode_actions_rsp): Adjust to call encode_actions instead of
1962 encode_actions_and_make_cleanup. Adjust to method renames.
1963 (add_aexpr): Now a method of collection_list.
1964 * tracepoint.h: Include <vector> and <string>.
1965 (struct memrange): Add constructors.
1966 (struct collection_list): Now a class.
1967 (class collection_list) <collection_list, ~collection_list,
1968 add_wholly_collected, append_exp, add_aexpr, add_register,
1969 add_memrange, collect_symbol, add_local_symbols,
1970 add_static_trace_data, finish, stringify, wholly_collected, and
1971 computed>: New methods.
1972 <regs_mask>: Rename to ...
1973 <m_regs_mask>: ... this.
1974 <listsize, next_memrange, list>: Delete fields.
1975 <m_memranges>: New field.
1976 <aexpr_listsize, next_aexpr_elt, aexpr_list>: Delete fields.
1977 <m_aexprs>: New field.
1978 <strace_data>: Rename to ...
1979 <m_strace_data>: ... this. Now a bool.
1980 <wholly_collected>: Rename to ...
1981 <m_wholly_collected>: ... this. Now a std::vector<std::string>.
1982 <computed>: Rename to ...
1983 <m_computed>: ... this. Now a std::vector<std::string>.
1984 (encode_actions_and_make_cleanup): Delete declaration.
1985 (encode_actions): New declaration.
1987 2016-11-08 Pedro Alves <palves@redhat.com>
1989 * ui-file.c (do_ui_file_as_string, ui_file_as_string): New
1991 * ui-file.h: Include <string>.
1992 (ui_file_as_string): New declaration.
1994 2016-11-08 Pedro Alves <palves@redhat.com>
1996 * ada-lang.c (ada_read_renaming_var_value): Use expression_up.
1997 (struct ada_catchpoint_location) <excep_cond_expr>: Now an
1999 (ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
2001 (create_excep_cond_exprs): Use expression_up and gdb::move.
2002 (allocate_location_exception): Use new instead of XNEW.
2003 (should_stop_exception): Likewise. Adjust to use expression_up.
2004 (create_ada_exception_catchpoint): Use new instead of XNEW.
2005 * ax-gdb.c (agent_eval_command_one): Use expression_up instead of
2007 (maint_agent_printf_command): Use expression_up.
2008 * break-catch-sig.c (create_signal_catchpoint): Use new instead of
2010 * break-catch-syscall.c (create_syscall_event_catchpoint):
2012 * break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
2013 of XCNEW. Use gdb::unique_ptr instead of cleanups.
2014 * breakpoint.c (set_breakpoint_condition, update_watchpoint)
2015 (parse_cmd_to_aexpr, watchpoint_check)
2016 (bpstat_check_breakpoint_conditions, watchpoint_locations_match):
2017 Adjust to use expression_up.
2018 (init_bp_location): Adjust.
2019 (free_bp_location): Use delete instead of xfree.
2020 (set_raw_breakpoint_without_location, set_raw_breakpoint)
2021 (add_solib_catchpoint, create_fork_vfork_event_catchpoint)
2022 (new_single_step_breakpoint, create_breakpoint_sal): Use new
2024 (find_condition_and_thread): Adjust to use expression_up.
2025 (create_breakpoint): Use new instead of XNEW.
2026 (dtor_watchpoint): Don't xfree expression pointers, they're
2028 (insert_watchpoint, remove_watchpoint): Adjust.
2029 (watch_command_1): Use expression_up. Use new instead of XCNEW.
2030 (catch_exec_command_1): Use new instead of XNEW.
2031 (bp_location_dtor): Don't xfree expression pointers, they're
2033 (base_breakpoint_allocate_location)
2034 (strace_marker_create_breakpoints_sal): Use new instead of XNEW.
2035 (delete_breakpoint): Use delete instead of xfree.
2036 * breakpoint.h (struct bp_location) <cond>: Now an
2037 unique_ptr<expression> instead of a raw pointer.
2038 (struct watchpoint) <exp, cond_exp>: Likewise.
2039 * cli/cli-script.c (execute_control_command): Use expression_up
2040 instead of cleanups.
2041 * dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
2042 * eval.c (parse_and_eval_address, parse_and_eval_long)
2043 (parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
2044 Use expression_up instead of cleanups.
2045 * expression.h (expression_up): New typedef.
2046 (parse_expression, parse_expression_with_language, parse_exp_1):
2047 Change return type to expression_up.
2048 * mi/mi-main.c (mi_cmd_data_evaluate_expression)
2049 (print_variable_or_computed): Use expression_up.
2050 * objc-lang.c (print_object_command): Use expression_up instead of
2052 * parse.c (parse_exp_1, parse_exp_in_context)
2053 (parse_exp_in_context_1, parse_expression)
2054 (parse_expression_with_language): Return an expression_up instead
2056 (parse_expression_for_completion): Use expression_up.
2057 * printcmd.c (struct display) <exp>: Now an expression_up instead
2059 (print_command_1, output_command_const, set_command, x_command):
2060 Use expression_up instead of cleanups.
2061 (display_command): Likewise. Use new instead of XNEW.
2062 (free_display): Use delete instead of xfree.
2063 (do_one_display): Adjust to use expression_up.
2064 * remote.c (remote_download_tracepoint): Likewise.
2065 * stack.c (return_command): Likewise.
2066 * tracepoint.c (validate_actionline, encode_actions_1): Use
2067 expression_up instead of cleanups.
2068 * typeprint.c (whatis_exp, maintenance_print_type): Likewise.
2069 * value.c (init_if_undefined_command): Likewise.
2070 * varobj.c (struct varobj_root) <exp>: Now an expression_up
2071 instead of a raw pointer.
2072 (varobj_create): Adjust.
2073 (varobj_set_value): Use an expression_up instead of cleanups.
2074 (new_root_variable): Use new instead of XNEW.
2075 (free_variable): Use delete instead of xfree.
2076 (value_of_root_1): Use std::swap.
2078 2016-11-08 Pedro Alves <palves@redhat.com>
2080 * cli/cli-script.c (execute_control_command): Use std::string
2081 instead of cleanups.
2082 (locate_arg): Constify return type.
2083 (insert_args): Constify paremeter. Simplify using std::string.
2084 Return a std::string.
2086 2016-11-08 Pedro Alves <palves@redhat.com>
2088 * breakpoint.c (struct commands_info) <arg>: Constify.
2089 (commands_command_1): Constify 'arg' parameter. Use std::string
2091 (commands_from_control_command): Constify 'arg' parameter.
2092 (map_breakpoint_numbers): Constify 'args' parameter.
2093 * breakpoint.h (commands_from_control_command): Constify 'arg'
2096 2016-11-08 Pedro Alves <palves@redhat.com>
2098 * cli/cli-script.c (execute_control_command): Assume insert_args
2100 (insert_args): Assume xmalloc never returns NULL.
2102 2016-11-08 Pedro Alves <palves@redhat.com>
2104 * Makefile.in (COMMON_OBS): Add utils-selftests.o.
2105 * common/common-utils.c (string_printf): New function.
2106 * common/common-utils.h: Include <string>.
2107 (string_printf): Declare.
2108 * utils-selftests.c: New file.
2110 2016-11-08 Yao Qi <yao.qi@linaro.org>
2112 * aarch64-tdep.c (aarch64_software_single_step): Return
2113 VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call
2114 insert_single_step_breakpoint.
2115 * alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
2116 (alpha_software_single_step): Likewise.
2117 * alpha-tdep.h (alpha_software_single_step): Update declaration.
2118 * arm-linux-tdep.c (arm_linux_software_single_step): Return
2119 VEC (CORE_ADDR) *. Return NULL instead of 0.
2120 * arm-tdep.c (arm_software_single_step): Return NULL instead of 0.
2121 * arm-tdep.h (arm_software_single_step): Update declaration.
2122 * breakpoint.c (insert_single_step_breakpoints): New function.
2123 * breakpoint.h (insert_single_step_breakpoints): Declare.
2124 * cris-tdep.c (cris_software_single_step): Return
2125 VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
2126 * gdbarch.sh (software_single_step): Change it to return
2128 * gdbarch.c, gdbarch.h: Regenerated.
2129 * infrun.c (maybe_software_singlestep): Adjust.
2130 * mips-tdep.c (mips_deal_with_atomic_sequence): Return
2131 VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
2132 (micromips_deal_with_atomic_sequence): Likewise.
2133 (deal_with_atomic_sequence): Likewise.
2134 (mips_software_single_step): Likewise.
2135 * mips-tdep.h (mips_software_single_step): Update declaration.
2136 * moxie-tdep.c (moxie_software_single_step): Likewise.
2137 * nios2-tdep.c (nios2_software_single_step): Likewise.
2138 * ppc-tdep.h (ppc_deal_with_atomic_sequence): Update
2140 * record-full.c (record_full_resume): Adjust.
2141 (record_full_wait_1): Likewise.
2142 * rs6000-aix-tdep.c (rs6000_software_single_step): Return
2143 VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
2144 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return
2145 VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
2146 * s390-linux-tdep.c (s390_software_single_step): Likewise.
2147 * sparc-tdep.c (sparc_software_single_step): Likewise.
2148 * spu-tdep.c (spu_software_single_step): Likewise.
2149 * tic6x-tdep.c (tic6x_software_single_step): Likewise.
2151 2016-11-08 Yao Qi <yao.qi@linaro.org>
2153 * arm-linux-tdep.c (arm_linux_software_single_step): Write
2154 adjusted address back to vector. Call insert_single_step_breakpoint
2156 * arm-tdep.c (arm_software_single_step): Likewise.
2158 2016-11-08 Yao Qi <yao.qi@linaro.org>
2160 * arm-linux-tdep.c (arm_linux_software_single_step): Don't
2161 call arm_insert_single_step_breakpoint, call
2162 insert_single_step_breakpoint instead.
2163 * arm-tdep.c (arm_insert_single_step_breakpoint): Remove.
2164 (arm_software_single_step): Don't call
2165 arm_insert_single_step_breakpoint, call
2166 insert_single_step_breakpoint instead.
2167 * arm-tdep.h (arm_insert_single_step_breakpoint): Remove
2170 2016-11-08 Cordian A. Daniluk <th3c0r1uk@gmail.com>
2172 PR breakpoints/20739
2173 * breakpoint.c (check_fast_tracepoint_sals): Don't print duplicate
2176 2016-11-08 Yao Qi <yao.qi@linaro.org>
2178 * rust-lang.c (val_print_struct): Fix indentation.
2180 2016-11-08 Lionel Flandrin <lionel@svkt.org>
2182 * remote.c (process_g_packet): Detect truncated registers in 'g'
2183 packets and raise an error.
2185 2016-11-07 Doug Evans <dje@google.com>
2187 * guile/scm-value.c (gdbscm_value_field): Fix call to value_struct_elt.
2188 * python/py-value.c (valpy_getitem): Ditto.
2190 2016-11-07 Doug Evans <dje@google.com>
2192 * i386-tdep.c (i386_gdbarch_init): Add comments.
2194 2016-11-07 Doug Evans <dje@google.com>
2196 * python/py-unwind.c (unwind_infopy_str): Fix use of VEC_iterate.
2198 2016-11-07 Doug Evans <dje@google.com>
2200 * configure.tgt (x86_64-*-elf*): Remove i386bsd-tdep.o.
2202 2016-11-04 Simon Marchi <simon.marchi@polymtl.ca>
2204 * maint.c (scoped_command_stats::scoped_command_stats): Fix typo.
2205 * ppcnbsd-tdep.c (_initialize_ppcnbsd_tdep): Likewise.
2206 * ppcobsd-tdep.c (_initialize_ppcobsd_tdep): Likewise.
2207 * ui-out.c (ui_out_new): Likewise.
2208 * utils.c (init_page_info): Likewise.
2209 (reset_prompt_for_continue_wait_time): Likewise.
2210 * windows-nat.c (windows_init_thread_list): Likewise.
2211 * xtensa-tdep.c (call0_analyze_prologue): Likewise.
2213 2016-10-29 Manish Goregaokar <manish@mozilla.com>
2215 * rust-exp.y: Parse `sizeof(exp)` as `UNOP_SIZEOF`.
2217 2016-10-28 Manish Goregaokar <manish@mozilla.com>
2219 * rust-lang.c (rust_union_is_untagged): Add function to check if a
2220 union is an untagged union.
2221 (rust_val_print): Handle printing of untagged union values.
2222 (rust_print_type): Handle printing of untagged union types.
2223 (rust_evaluate_subexp): Handle evaluating field access on untagged
2226 2016-10-27 Manish Goregaokar <manish@mozilla.com>
2228 * rust-lang.c (rust_get_disr_info): Treat univariant enums without
2229 discriminants as encoded enums with a real field.
2230 * rust-lang.c (rust_evaluate_subexp): Handle field access on
2231 encoded struct-like enums.
2233 2016-11-03 Yao Qi <yao.qi@linaro.org>
2235 * Makefile.in (.y.c): Replace YY_NULL with YY_NULLPTR.
2237 2016-11-03 Yao Qi <yao.qi@linaro.org>
2238 Pedro Alves <palves@redhat.com>
2240 * aarch64-tdep.c (aarch64_default_breakpoint): Change it to
2241 constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2242 (aarch64_gdbarch_init): Don't use
2243 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2244 * alpha-tdep.c (break_insn): Rename to alpha_break_insn.
2245 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2246 (alpha_gdbarch_init): Don't use
2247 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2248 * arc-tdep.c (arc_gdbarch_init): Don't use
2249 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2250 * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
2251 (struct bp_manipulation): New.
2252 (SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
2253 (struct bp_manipulation_endian): New.
2254 (BP_MANIPULATION): New.
2255 (BP_MANIPULATION_ENDIAN): New.
2256 * arm-tdep.c (arm_gdbarch_init): Don't use
2257 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2258 * avr-tdep.c (avr_break_insn): Change it constexpr.
2259 (avr_gdbarch_init): Don't use
2260 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2261 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
2262 * cris-tdep.c (cris_gdbarch_init): Likewise.
2263 * frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
2264 change its type to constexpr. Don't use
2265 GDBARCH_BREAKPOINT_MANIPULATION.
2266 (frv_gdbarch_init): Don't use
2267 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2268 * ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
2269 change its type to constexpr. Don't use
2270 GDBARCH_BREAKPOINT_MANIPULATION.
2271 (ft32_gdbarch_init): Don't use
2272 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2273 * h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
2274 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2275 (h8300_gdbarch_init): Don't use
2276 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2277 * hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
2278 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2279 (hppa_gdbarch_init): Don't use
2280 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2281 * i386-tdep.c (break_insn): Rename it to i386_break_insn.
2282 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2283 (i386_gdbarch_init): Don't use
2284 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2285 * iq2000-tdep.c (iq2000_gdbarch_init): Don't use
2286 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2287 * lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
2288 change its type to constexpr. Don't use
2289 GDBARCH_BREAKPOINT_MANIPULATION.
2290 (lm32_gdbarch_init): Don't use
2291 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2292 * m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
2293 its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2294 (m32c_gdbarch_init): Don't use
2295 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2296 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2297 * m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
2298 change its type to constexpr.
2299 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2300 (m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
2301 * m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
2302 its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2303 (m68k_gdbarch_init): Don't use
2304 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2305 * m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
2306 its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2307 (m88k_gdbarch_init): Don't use
2308 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2309 * mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
2310 its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2311 (mep_gdbarch_init): Don't use
2312 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2313 * microblaze-tdep.c (break_insn): Rename it to
2314 microblaze_break_insn and change its type to constexpr. Don't use
2315 GDBARCH_BREAKPOINT_MANIPULATION.
2316 (microblaze_gdbarch_init): Don't use
2317 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2318 * mips-tdep.c (mips_gdbarch_init): Likewise.
2319 * mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
2320 change its type to constexpr. Don't use
2321 GDBARCH_BREAKPOINT_MANIPULATION.
2322 (mn10300_gdbarch_init): Don't use
2323 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2324 * moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
2325 change its type to constexpr. Don't use
2326 GDBARCH_BREAKPOINT_MANIPULATION.
2327 (moxie_gdbarch_init): Don't use
2328 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2329 * msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
2330 and change its type to constexpr. Don't use
2331 GDBARCH_BREAKPOINT_MANIPULATION.
2332 (msp430_gdbarch_init): Don't use
2333 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2334 * mt-tdep.c (mt_gdbarch_init): Likewise.
2335 * nds32-tdep.c (break_insn): Rename it to nds32_break_insn
2336 and change its type to constexpr. Don't use
2337 GDBARCH_BREAKPOINT_MANIPULATION.
2338 (nds32_gdbarch_init): Don't use
2339 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2340 * nios2-tdep.c (nios2_gdbarch_init): Likewise.
2341 * rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
2342 and change its type to rl78_break_insn. Don't use
2343 GDBARCH_BREAKPOINT_MANIPULATION.
2344 (rl78_gdbarch_init): Don't use
2345 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2346 * rs6000-tdep.c (big_breakpoint): Change its type to
2348 (little_breakpoint): Likewise.
2349 Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
2350 (rs6000_gdbarch_init): Don't use
2351 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2352 * rx-tdep.c (breakpoint): Rename it to rx_break_insn and
2353 change its type to constexpr. Don't use
2354 GDBARCH_BREAKPOINT_MANIPULATION.
2355 (rx_gdbarch_init): Don't use
2356 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2357 * s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
2358 and change its type to constexpr. Don't use
2359 GDBARCH_BREAKPOINT_MANIPULATION
2360 (s390_gdbarch_init): Don't use
2361 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2362 * score-tdep.c (score_gdbarch_init): Likewise.
2363 * sh-tdep.c (sh_gdbarch_init): Likewise.
2364 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2365 * sparc-tdep.c (break_insn): Rename it to sparc_break_insn
2366 and change its type to constexpr. Don't use
2367 GDBARCH_BREAKPOINT_MANIPULATION.
2368 (sparc32_gdbarch_init): Don't use
2369 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2370 * spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
2371 its type to constexpr. Don't use
2372 GDBARCH_BREAKPOINT_MANIPULATION.
2373 (spu_gdbarch_init): Don't use
2374 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2375 * tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
2376 * tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
2377 and change its type to constexpr. Don't use
2378 GDBARCH_BREAKPOINT_MANIPULATION.
2379 (tilegx_gdbarch_init): Don't use
2380 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2381 * v850-tdep.c (v850_gdbarch_init): Likewise.
2382 * vax-tdep.c (break_insn): Rename it to vax_break_insn and
2383 change its type to constexpr.
2384 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2385 (vax_gdbarch_init): Don't use
2386 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2387 * xstormy16-tdep.c (breakpoint): Rename it to
2388 xstormy16_break_insn and change its type to constexpr.
2389 Don't use GDBARCH_BREAKPOINT_MANIPULATION.
2390 (xstormy16_gdbarch_init): Don't use
2391 SET_GDBARCH_BREAKPOINT_MANIPULATION.
2392 * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
2394 2016-11-03 Yao Qi <yao.qi@linaro.org>
2396 * arm-tdep.c (arm_override_mode): Remove.
2397 (arm_pc_is_thumb): Update.
2398 (arm_insert_single_step_breakpoint): Update.
2400 2016-11-03 Yao Qi <yao.qi@linaro.org>
2402 * arch-utils.c (default_breakpoint_kind_from_current_state):
2404 * arch-utils.h (default_breakpoint_kind_from_current_state):
2406 * arm-tdep.c (arm_breakpoint_kind_from_current_state): New
2408 (arm_gdbarch_init): Call
2409 set_gdbarch_breakpoint_kind_from_current_state.
2410 * breakpoint.c (breakpoint_kind): Call
2411 gdbarch_breakpoint_kind_from_current_state for single step
2412 breakpoint. Update comments.
2413 * gdbarch.sh (breakpoint_kind_from_current_state): New.
2414 * gdbarch.c, gdbarch.h: Regenerate.
2416 2016-11-03 Yao Qi <yao.qi@linaro.org>
2418 * arch-utils.c (default_breakpoint_from_pc): New function.
2419 * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): Remove.
2420 (GDBARCH_BREAKPOINT_MANIPULATION): Don't use
2421 GDBARCH_BREAKPOINT_FROM_PC.
2422 (SET_GDBARCH_BREAKPOINT_MANIPULATION): Don't call
2423 set_gdbarch_breakpoint_from_pc.
2424 (default_breakpoint_from_pc): Remove declaration.
2425 * gdbarch.sh (breakpoint_from_pc): Add its default implementation.
2426 * gdbarch.c, gdbarch.h: Regenerate.
2427 * arm-tdep.c: Don't use GDBARCH_BREAKPOINT_FROM_PC.
2428 * arc-tdep.c, bfin-tdep.c, cris-tdep.c, iq2000-tdep.c: Likewise.
2429 * m32r-tdep.c, mips-tdep.c, mt-tdep.c: Likewise.
2430 * nios2-tdep.c, score-tdep.c, sh-tdep.c: Likewise.
2431 * sh64-tdep.c, tic6x-tdep.c, v850-tdep.c, xtensa-tdep.c: Likewise.
2433 2016-11-03 Yao Qi <yao.qi@linaro.org>
2435 * arch-utils.c (default_remote_breakpoint_from_pc): Remove.
2436 * arch-utils.h (default_remote_breakpoint_from_pc): Remove.
2437 * arm-tdep.c (arm_remote_breakpoint_from_pc): Remove.
2438 (arm_gdbarch_init): Don't call
2439 set_gdbarch_remote_breakpoint_from_pc.
2440 * gdbarch.sh (remote_breakpoint_from_pc): Remove.
2441 * gdbarch.c, gdbarch.h: Regenerate.
2442 * mips-tdep.c (mips_remote_breakpoint_from_pc): Remove.
2443 (mips_gdbarch_init): Don't call
2444 set_gdbarch_remote_breakpoint_from_pc.
2446 2016-11-03 Yao Qi <yao.qi@linaro.org>
2448 * breakpoint.h (struct bp_target_info) <placed_size>: Remove.
2452 2016-11-03 Yao Qi <yao.qi@linaro.org>
2454 * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
2455 breakpoint_kind_from_pc and sw_breakpoint_from_kind.
2456 (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
2457 (SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
2458 set_gdbarch_breakpoint_kind_from_pc and
2459 set_gdbarch_sw_breakpoint_from_kind.
2460 * arm-tdep.c: Add comments.
2461 * bfin-tdep.c: Likewise.
2462 * breakpoint.c (breakpoint_kind): New function.
2463 (insert_bp_location): Set target_info.placed_size and
2464 target_info.placed_address.
2465 (bkpt_insert_location): Likewise.
2466 * cris-tdep.c: Add comments.
2467 * gdbarch.sh (breakpoint_kind_from_pc): New.
2468 (sw_breakpoint_from_kind): New.
2469 * gdbarch.c, gdbarch.h: Regenerated.
2470 * ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
2471 bp_tgt->placed_size.
2472 (ia64_memory_remove_breakpoint): Don't assert
2473 bp_tgt->placed_size.
2474 (ia64_breakpoint_kind_from_pc): New function.
2475 (ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
2476 * m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
2477 bp_tgt->placed_size.
2478 * mem-break.c (default_memory_insert_breakpoint): Don't set
2479 bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind.
2480 (default_memory_remove_breakpoint): Call
2481 gdbarch_sw_breakpoint_from_kind.
2482 (memory_validate_breakpoint): Don't check bp_tgt->placed_size.
2483 * mips-tdep.c: Add comments.
2484 * mt-tdep.c: Likewise.
2485 * nios2-tdep.c: Likewise.
2486 * record-full.c (record_full_insert_breakpoint): Don't call
2487 gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address
2488 and bp_tgt->placed_size.
2489 * remote.c (remote_insert_breakpoint): Don't call
2490 gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size.
2491 Don't set bp_tgt->placed_address and bp_tgt->placed_size.
2492 (remote_insert_hw_breakpoint): Likewise.
2493 * score-tdep.c: Likewise.
2494 * sh-tdep.c: Likewise.
2495 * tic6x-tdep.c: Likewise.
2496 * v850-tdep.c: Likewise.
2497 * xtensa-tdep.c: Likewise.
2499 2016-11-03 Yao Qi <yao.qi@linaro.org>
2501 * arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): New macro.
2502 (GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): New macro.
2503 * arm-tdep.c (arm_breakpoint_from_pc): Remove.
2504 (arm_breakpoint_kind_from_pc): New function.
2505 (arm_sw_breakpoint_from_kind): New function.
2506 (arm_breakpoint_from_pc): Call arm_breakpoint_kind_from_pc
2507 and arm_sw_breakpoint_from_kind.
2508 Use GDBARCH_BREAKPOINT_FROM_PC.
2509 (arm_remote_breakpoint_from_pc): Call
2510 arm_breakpoint_kind_from_pc.
2511 (arm_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
2512 with SET_GDBARCH_BREAKPOINT_MANIPULATION.
2513 * arc-tdep.c: Likewise.
2514 * bfin-tdep.c: Likewise.
2515 * cris-tdep.c: Likewise.
2516 * iq2000-tdep.c: Likewise.
2517 * m32r-tdep.c: Likewise.
2518 * mips-tdep.c: Likewise.
2519 * mt-tdep.c: Likewise.
2520 * nios2-tdep.c: Likewise.
2521 * rs6000-tdep.c: Likewise.
2522 * score-tdep.c: Likewise.
2523 * sh-tdep.c: Likewise.
2524 * sh64-tdep.c: Likewise.
2525 * tic6x-tdep.c: Likewise.
2526 * v850-tdep.c: Likewise.
2527 * xtensa-tdep.c: Likewise.
2529 2016-11-03 Yao Qi <yao.qi@linaro.org>
2531 * mips-tdep.c (mips_breakpoint_kind): New enum.
2532 (mips_breakpoint_from_pc): Use it.
2533 (mips_remote_breakpoint_from_pc): Likewise.
2535 2016-11-03 Yao Qi <yao.qi@linaro.org>
2537 * arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): New macro.
2538 (SET_GDBARCH_BREAKPOINT_MANIPULATION): New macro.
2539 aarch64-tdep.c (aarch64_breakpoint_from_pc): Remove. Use
2540 GDBARCH_BREAKPOINT_MANIPULATION.
2541 (aarch64_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
2542 with SET_GDBARCH_BREAKPOINT_MANIPULATION.
2543 * alpha-tdep.c: Likewise.
2544 * avr-tdep.c: Likewise.
2545 * frv-tdep.c: Likewise.
2546 * ft32-tdep.c: Likewise.
2547 * h8300-tdep.c: Likewise.
2548 * hppa-tdep.c: Likewise.
2549 * i386-tdep.c: Likewise.
2550 * lm32-tdep.c: Likewise.
2551 * m32c-tdep.c: Likewise.
2552 * m68hc11-tdep.c: Likewise.
2553 * m68k-tdep.c: Likewise.
2554 * m88k-tdep.c: Likewise.
2555 * mep-tdep.c: Likewise.
2556 * microblaze-tdep.c: Likewise.
2557 * mn10300-tdep.c: Likewise.
2558 * moxie-tdep.c: Likewise.
2559 * msp430-tdep.c: Likewise.
2560 * rl78-tdep.c: Likewise.
2561 * rx-tdep.c: Likewise.
2562 * s390-linux-tdep.c: Likewise.
2563 * sparc-tdep.c: Likewise.
2564 * spu-tdep.c: Likewise.
2565 * tilegx-tdep.c: Likewise.
2566 * vax-tdep.c: Likewise.
2567 * xstormy16-tdep.c: Likewise.
2569 2016-11-03 Yao Qi <yao.qi@linaro.org>
2571 * mem-break.c (default_memory_insert_breakpoint): Don't check
2573 * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint):
2575 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
2577 2016-11-02 Tom Tromey <tom@tromey.com>
2579 * dwarf2loc.c (dwarf_evaluate_loc_desc::get_base_type): Rename
2580 from impl_get_base_type. Rewrite.
2581 (struct dwarf_expr_baton): Remove.
2582 (dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value): Save and
2583 restore more fields.
2584 (symbol_needs_eval_context::get_frame_pc): New method.
2585 * dwarf2expr.h (dwarf_expr_context::get_base_type): Now public,
2587 (dwarf_expr_context::impl_get_base_type): Remove.
2588 * dwarf2expr.c (dwarf_expr_context::get_base_type): Remove.
2590 2016-10-31 Maciej W. Rozycki <macro@imgtec.com>
2592 * configure.ac <mips-sgi-irix5*>: Remove <sys/proc.h> _KMEMUSER
2594 * configure: Regenerate.
2595 * config.in: Regenerate.
2597 2016-10-31 Maciej W. Rozycki <macro@imgtec.com>
2599 * mips-tdep.c (mips_r3041_reg_names): Remove.
2600 (mips_breakpoint_from_pc): Remove IDT and PMON breakpoint
2603 2016-10-31 Maciej W. Rozycki <macro@imgtec.com>
2605 * defs.h (gdb_osabi): Remove GDB_OSABI_IRIX enum value.
2606 * osabi.c (gdb_osabi_names): Remove "Irix" entry.
2607 * mips-tdep.c (mips_irix_reg_names): Remove.
2608 (mips_register_type): Remove GDB_OSABI_IRIX code.
2609 (mips_pseudo_register_type): Likewise.
2610 (mips_breakpoint_from_pc): Likewise.
2611 (mips_gdbarch_init): Likewise.
2613 2016-10-29 Pedro Alves <palves@redhat.com>
2615 * NEWS: Clarify C++ requirement.
2617 2016-10-29 Pedro Alves <palves@redhat.com>
2619 * NEWS: Adjust to mention C++11 requirement.
2621 2016-10-29 Eli Zaretskii <eliz@gnu.org>
2623 * NEWS: Mention support for redirection on MS-Windows.
2625 * windows-nat.c (redir_open, redir_set_redirection)
2626 (redirect_inferior_handles) [!__CYGWIN__]: New functions.
2627 (windows_create_inferior) [!__CYGWIN__]: Use
2628 'redirect_inferior_handles' to redirect standard handles of the
2629 debuggee if the command line requests that.
2631 2016-10-28 Pedro Alves <palves@redhat.com>
2633 * Makefile.in (CXX_DIALECT): Get from configure.
2634 (COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
2635 (FLAGS_TO_PASS): Pass CXX_DIALECT.
2636 * acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
2637 * ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
2638 AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
2639 * configure.ac: Call AX_CXX_COMPILE_STDCXX.
2640 * config.in: Regenerate.
2641 * configure: Regenerate.
2643 2016-10-28 Pedro Alves <palves@redhat.com>
2645 * ax_cxx_compile_stdcxx.m4: New file.
2647 2016-10-28 Pedro Alves <palves@redhat.com>
2649 * maint.c (scoped_command_stats::scoped_command_stats): Clear
2650 m_space_enabled, m_time_enabled and m_symtab_enabled.
2652 2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
2654 * btrace.c (bfun_s): New typedef.
2655 (ftrace_update_caller): Print caller in debug dump.
2656 (ftrace_get_caller, ftrace_match_backtrace, ftrace_fixup_level)
2657 (ftrace_compute_global_level_offset, ftrace_connect_bfun)
2658 (ftrace_connect_backtrace, ftrace_bridge_gap, btrace_bridge_gaps): New.
2659 (btrace_compute_ftrace_bts): Pass vector of gaps. Collect gaps.
2660 (btrace_compute_ftrace_pt): Likewise.
2661 (btrace_compute_ftrace): Split into this, ...
2662 (btrace_compute_ftrace_1): ... this, and ...
2663 (btrace_finalize_ftrace): ... this. Call btrace_bridge_gaps.
2665 2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
2667 * btrace.c (ftrace_new_return): Start from the previous function's
2668 level if we can't find a matching call for a return.
2670 2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
2672 * btrace.c (ftrace_update_function): Update tail call heuristic.
2674 2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
2676 * btrace.c (btrace_compute_ftrace_bts, ftrace_add_pt): Allow
2678 * record-btrace.c (record_btrace_single_step_forward)
2679 (record_btrace_single_step_backward): Jump back to last
2680 instruction if step ends at a gap.
2681 (record_btrace_goto_begin): Skip gaps.
2683 2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
2685 * btrace.c (ftrace_add_pt): Fix gap indication. Add warning for non-
2686 contiguous trace and overflow. Rephrase trace decode warning and print
2687 instruction number. Remove dead gaps warning.
2688 (btrace_compute_ftrace_bts): Rephrase warnings and print instruction
2691 2016-10-25 Sandra Loosemore <sandra@codesourcery.com>
2692 Luis Machado <lgustavo@codesourcery.com>
2693 Pedro Alves <palves@redhat.com>
2696 * exceptions.c (exception_print_same): Moved here from exec.c.
2697 * exceptions.h (exception_print_same): Declare.
2698 * exec.h: Include "symfile-add-flags.h".
2699 (try_open_exec_file): New declaration.
2700 * exec.c (exception_print_same): Moved to exceptions.c.
2701 (try_open_exec_file): New function.
2702 (exec_file_locate_attach): Rename exec_file and full_exec_path
2703 variables to avoid confusion between target and host pathnames.
2704 Move pathname processing logic to exec_file_find. Do not return
2705 early if pathname lookup fails; Call try_open_exec_file.
2706 * infrun.c (follow_exec): Split and rename execd_pathname variable
2707 to avoid confusion between target and host pathnames. Warn if
2708 pathname lookup fails. Pass target pathname to
2709 target_follow_exec, not hostpathname. Call try_open_exec_file.
2710 * main.c (symbol_file_add_main_adapter): New function.
2711 (captured_main_1): Use it.
2712 * solib-svr4.c (open_symbol_file_object): Adjust to pass
2713 symfile_add_flags to symbol_file_add_main.
2714 * solib.c (exec_file_find): Incorporate fallback logic for relative
2715 pathnames formerly in exec_file_locate_attach.
2716 * symfile.c (symbol_file_add_main, symbol_file_add_main_1):
2717 Replace 'from_tty' parameter with a symfile_add_file.
2718 (symbol_file_command): Adjust to pass symfile_add_flags to
2719 symbol_file_add_main.
2720 * symfile.h (symbol_file_add_main): Replace 'from_tty' parameter
2721 with a symfile_add_file.
2723 2016-10-26 Pedro Alves <palves@redhat.com>
2725 * coffread.c (coff_symfile_read): Use symfile_add_flags.
2726 * dbxread.c (dbx_symfile_read): Ditto.
2727 * elfread.c (elf_symfile_read): Ditto.
2728 * inferior.h: Include symfile-add-flags.h.
2729 (struct inferior) <symfile_flags>: Now symfile_add_flags.
2730 * machoread.c (macho_add_oso_symfile, macho_symfile_read_all_oso)
2731 (macho_symfile_read, mipscoff_symfile_read): Use
2733 * objfile-flags.h: New file.
2734 * objfiles.c (allocate_objfile): Use objfile_flags.
2735 * objfiles.h: Include objfile-flags.h.
2736 (struct objfile) <flags>: Now an objfile_flags.
2737 (OBJF_REORDERED, OBJF_SHARED, OBJF_READNOW, OBJF_USERLOADED)
2738 (OBJF_PSYMTABS_READ, OBJF_MAINLINE, OBJF_NOT_FILENAME): Delete.
2739 Converted to an enum-flags in objfile-flags.h.
2740 (allocate_objfile): Use objfile_flags.
2741 * python/py-objfile.c (objfpy_add_separate_debug_file): Remove
2743 * solib.c (solib_read_symbols, solib_add)
2744 (reload_shared_libraries_1): Use symfile_add_flags.
2745 * solib.h: Include "symfile-add-flags.h".
2746 (solib_read_symbols): Use symfile_add_flags.
2747 * symfile-add-flags.h: New file.
2748 * symfile-debug.c (debug_sym_read): Use symfile_add_flags.
2749 * symfile-mem.c (symbol_file_add_from_memory): Use
2751 * symfile.c (read_symbols, syms_from_objfile_1)
2752 (syms_from_objfile, finish_new_objfile): Use symfile_add_flags.
2753 (symbol_file_add_with_addrs): Use symfile_add_flags and
2755 (symbol_file_add_separate): Use symfile_add_flags.
2756 (symbol_file_add_from_bfd, symbol_file_add): Use symfile_add_flags
2758 (symbol_file_add_main_1): : Use objfile_flags. Fix add_flags vs
2760 (symbol_file_command): Use objfile_flags.
2761 (add_symbol_file_command): Use symfile_add_flags and
2763 (clear_symtab_users): Use symfile_add_flags.
2764 * symfile.h: Include "symfile-add-flags.h" and "objfile-flags.h".
2765 (struct sym_fns) <sym_read>: Use symfile_add_flags.
2766 (clear_symtab_users): Use symfile_add_flags.
2767 (enum symfile_add_flags): Delete, moved to symfile-add-flags.h and
2768 converted to enum-flags.
2769 (symbol_file_add, symbol_file_add_from_bfd)
2770 (symbol_file_add_separate): Use symfile_add_flags.
2771 * xcoffread.c (xcoff_initial_scan): Use symfile_add_flags.
2773 2016-10-26 Pedro Alves <palves@redhat.com>
2775 * inferior.h (ALL_NON_EXITED_INFERIORS): New macro.
2776 * infrun.c (do_target_resume): Call target_commit_resume.
2777 (proceed): Defer target_commit_resume while looping over threads,
2778 resuming them. Call target_commit_resume at the end.
2779 * record-btrace.c (record_btrace_commit_resume): New function.
2780 (init_record_btrace_ops): Install it as to_commit_resume method.
2781 * record-full.c (record_full_commit_resume): New function.
2782 (record_full_wait_1): Call the beneath target's to_commit_resume
2784 (init_record_full_ops): Install record_full_commit_resume as
2785 to_commit_resume method.
2786 * remote.c (struct private_thread_info) <last_resume_step,
2787 last_resume_sig, vcont_resumed>: New fields.
2788 (remote_add_thread): Set the new thread's vcont_resumed flag.
2789 (demand_private_info): Delete.
2790 (get_private_info_thread, get_private_info_ptid): New functions.
2791 (remote_update_thread_list): Adjust.
2792 (process_initial_stop_replies): Clear the thread's vcont_resumed
2794 (remote_resume): If connected in non-stop mode, record the resume
2795 request and return early.
2796 (struct private_inferior): New.
2797 (struct vcont_builder): New.
2798 (vcont_builder_restart, vcont_builder_flush)
2799 (vcont_builder_push_action): New functions.
2800 (MAX_ACTION_SIZE): New macro.
2801 (remote_commit_resume): New function.
2802 (thread_pending_fork_status, is_pending_fork_parent_thread): New
2804 (check_pending_event_prevents_wildcard_vcont_callback)
2805 (check_pending_events_prevent_wildcard_vcont): New functions.
2806 (process_stop_reply): Adjust. Clear the thread's vcont_resumed
2808 (init_remote_ops): Install remote_commit_resume.
2809 * target-delegates.c: Regenerate.
2810 * target.c (defer_target_commit_resume): New global.
2811 (target_commit_resume, make_cleanup_defer_target_commit_resume):
2813 * target.h (struct target_ops) <to_commit_resume>: New field.
2814 (target_resume): Update comments.
2815 (target_commit_resume): New declaration.
2817 2016-10-26 Pedro Alves <palves@redhat.com>
2819 * inferior.c (exit_inferior_1): Free 'priv'.
2821 2016-10-26 Pedro Alves <palves@redhat.com>
2823 * remote.c (remote_resume_with_hc): New function, factored out
2825 (remote_resume): ... this. Always try vCont first.
2826 (remote_vcont_resume): Rename to ...
2827 (remote_resume_with_vcont): ... this. Bail out if execution
2828 direction is reverse.
2830 2016-10-25 Pedro Alves <palves@redhat.com>
2832 * dwarf2expr.h (struct dwarf_expr_context) <~dwarf_expr_context>:
2835 2016-10-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
2838 * defs.h: Remove obsolete comment
2840 * procfs.c (do_destroy_procinfo_cleanup): Add cast.
2841 (sysset_t_alloc): Likewise.
2842 (proc_set_traced_sysentry): Likewise.
2843 (proc_set_traced_sysexit): Likewise.
2844 [!PIOCLSTATUS && NEW_PROC_API] (do_closedir_cleanup): Likewise.
2845 (proc_get_LDT_entry): Initiate cleanups before returns.
2846 (procfs_wait): Use GDB_SIGNAL_0.
2847 (procfs_corefile_thread_callback): Add cast.
2848 * sol-thread.c (td_log_ftype, td_ta_new_ftype, td_ta_delete_ftype)
2849 (td_init_ftype, td_ta_get_ph_ftype, td_ta_get_nthreads_ftype)
2850 (td_ta_tsd_iter_ftype, td_ta_thr_iter_ftype)
2851 (td_thr_validate_ftype, td_thr_tsd_ftype, td_thr_get_info_ftype)
2852 (td_thr_getfpregs_ftype, td_thr_getxregsize_ftype)
2853 (td_thr_getxregs_ftype, td_thr_sigsetmask_ftype)
2854 (td_thr_setprio_ftype, td_thr_setsigpending_ftype)
2855 (td_thr_setfpregs_ftype, td_thr_setxregs_ftype)
2856 (td_ta_map_id2thr_ftype, td_ta_map_lwp2thr_ftype)
2857 (td_thr_getgregs_ftype, td_thr_setgregs_ftype): New typedefs.
2858 (p_td_log, p_td_ta_new, p_td_ta_delete, p_td_init, p_td_ta_get_ph)
2859 (p_td_ta_get_nthreads, p_td_ta_tsd_iter, p_td_ta_thr_iter)
2860 (p_td_thr_validate, p_td_thr_tsd, p_td_thr_get_info)
2861 (p_td_thr_getfpregs, p_td_thr_getxregsize, p_td_thr_getxregs)
2862 (p_td_thr_sigsetmask, p_td_thr_setprio, p_td_thr_setsigpending)
2863 (p_td_thr_setfpregs, p_td_thr_setxregs, p_td_ta_map_id2thr)
2864 (p_td_ta_map_lwp2thr, p_td_thr_getgregs, p_td_thr_setgregs): Use them.
2865 (ps_pdread): Add cast.
2866 (ps_ptread): Likewise.
2867 (resolve): Likewise.
2868 * top.c (gdb_safe_append_history): Print pid_t as long.
2870 2016-10-25 Pedro Alves <palves@redhat.com>
2872 * common/common-defs.h (__STDC_FORMAT_MACROS): Define.
2874 2016-10-25 Pedro Alves <palves@redhat.com>
2876 * common/new-op.c: Add comment about -fsanitize=address.
2878 2016-10-25 Pedro Alves <palves@redhat.com>
2880 * common/common-defs.h (__STDC_CONSTANT_MACROS)
2881 (__STDC_LIMIT_MACROS): Define.
2883 2016-10-25 Yao Qi <yao.qi@linaro.org>
2886 * common/new-op.c (__has_feature): New macro.
2887 Don't override operator new if asan is used.
2889 2016-10-24 Luis Machado <lgustavo@codesourcery.com>
2891 * exec.c (exec_file_locate_attach): Prevent NULL pointer dereference
2892 when duplicating a string.
2894 2016-10-24 Luis Machado <lgustavo@codesourcery.com>
2896 * exec.c (exception_print_same): Fix string comparison to use
2897 statically-allocated ones.
2899 2016-10-21 Tom Tromey <tom@tromey.com>
2901 * dwarf2expr.h (class dwarf_expr_context)
2902 <get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
2903 push_dwarf_block_entry_value, get_addr_index, get_object_address>:
2905 * dwarf2-frame.c (class dwarf_expr_executor)
2906 <get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
2907 push_dwarf_block_entry_value, get_addr_index, get_object_address>:
2909 <invalid>: New method.
2911 2016-10-21 Tom Tromey <tom@tromey.com>
2913 * minsyms.h (minimal_symbol_reader::record_full): "copy_name" now
2915 (record, record_with_info): Update.
2916 * minsyms.c (record): Fix indentation.
2917 (record_full): Fix indentation. Update for type change.
2918 * elfread.c (record_minimal_symbol): "copy_name" now a bool.
2919 (elf_symtab_read): "copy_names" now a bool.
2920 (elf_rel_plt_read, elf_read_minimal_symbols): Update.
2922 2016-10-21 Tom Tromey <tom@tromey.com>
2924 * main.c: Include <vector>.
2925 (cmdarg_s): Remove typedef. Don't define VEC.
2926 (captured_main_1): Use vector, not VEC. Remove cleanups.
2928 2016-10-21 Tom Tromey <tom@tromey.com>
2930 * dwarf2loc.c (struct dwarf_expr_context_funcs): Don't declare.
2931 (dwarf_expr_read_addr_from_reg, dwarf_expr_get_reg_value)
2932 (dwarf_expr_read_mem, dwarf_expr_frame_base): Rename; turn into
2934 (get_frame_pc_for_per_cu_dwarf_call): New function.
2935 (dwarf_expr_frame_cfa, dwarf_expr_frame_pc)
2936 (dwarf_expr_tls_address): Rename; turn into methods.
2937 (per_cu_dwarf_call): Remove arguments. Use
2938 get_frame_pc_for_per_cu_dwarf_call.
2939 (dwarf_evaluate_loc_desc): New class.
2940 (dwarf_expr_dwarf_call, dwarf_expr_context)
2941 (dwarf_expr_push_dwarf_reg_entry_value)
2942 (dwarf_expr_get_addr_index, dwarf_expr_get_obj_addr): Rename; turn
2944 (dwarf_expr_ctx_funcs): Remove.
2945 (dwarf2_evaluate_loc_desc_full): Update.
2946 (dwarf2_locexpr_baton_eval): Update.
2947 (symbol_needs_eval_context): New class.
2948 (symbol_needs_read_addr_from_reg, symbol_needs_get_reg_value)
2949 (symbol_needs_read_mem, symbol_needs_frame_base)
2950 (symbol_needs_frame_cfa, symbol_needs_tls_address)
2951 (symbol_needs_dwarf_call, needs_dwarf_reg_entry_value): Rename;
2953 (needs_get_addr_index, needs_get_obj_addr): Remove; turn into
2955 (symbol_needs_ctx_funcs): Remove.
2956 (dwarf2_loc_desc_get_symbol_read_needs): Update.
2957 * dwarf2expr.h (struct dwarf_expr_context_funcs): Remove; turn
2958 contents into methods.
2959 (struct dwarf_expr_context) <baton, funcs>: Remove.
2960 <read_addr_from_reg, get_reg_value, read_mem, get_frame_base,
2961 get_frame_cfa, get_frame_pc, get_tls_address, dwarf_call,
2962 impl_get_base_type, push_dwarf_block_entry_value, get_addr_index,
2963 get_object_address>: Declare new methods.
2964 (ctx_no_get_frame_base, ctx_no_get_frame_cfa)
2965 (ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
2966 (ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
2967 (ctx_no_get_addr_index): Don't declare.
2968 * dwarf2expr.c (get_base_type): Use impl_get_base_type.
2969 (execute_stack_op): Update.
2970 (ctx_no_get_frame_base, ctx_no_get_frame_cfa)
2971 (ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
2972 (ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
2973 (ctx_no_get_addr_index): Remove; now methods on
2975 * dwarf2-frame.c (read_addr_from_reg): Take a frame_info, not a
2977 (class dwarf_expr_executor): New class.
2978 (get_reg_value, read_mem): Rename, turn into methods.
2979 (execute_stack_op): Use dwarf_expr_executor.
2981 2016-10-21 Tom Tromey <tom@tromey.com>
2983 * dwarf2loc.c (per_cu_dwarf_call)
2984 (dwarf_expr_push_dwarf_reg_entry_value)
2985 (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
2986 (needs_dwarf_reg_entry_value)
2987 (dwarf2_loc_desc_get_symbol_read_needs): Update.
2988 * dwarf2expr.h (dwarf_expr_context) <push_address, eval, fetch,
2989 fetch_address, fetch_in_stack_memory, address_type, grow_stack,
2990 push, stack_empty_p, add_piece, get_base_type, execute_stack_op,
2991 pop>: New method declarations.
2992 (dwarf_expr_push_address, dwarf_expr_eval, dwarf_expr_fetch)
2993 (dwarf_expr_fetch_address, dwarf_expr_fetch_in_stack_memory):
2995 * dwarf2expr.c (address_type, grow_stack, push, push_address)
2996 (pop, fetch, fetch_address, fetch_in_stack_memory)
2997 (stack_empty_p, add_piece, eval, get_base_type)
2998 (execute_stack_op): Rename. Turn into methods.
2999 * dwarf2-frame.c (execute_stack_op): Update.
3001 2016-10-21 Tom Tromey <tom@tromey.com>
3003 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Stack-allocate
3004 dwarf_expr_context. Remove cleanups.
3005 (dwarf2_locexpr_baton_eval)
3006 (dwarf2_loc_desc_get_symbol_read_needs): Likewise.
3007 * dwarf2expr.h (dwarf_expr_context, ~dwarf_expr_context): Add
3008 constructors and destructors.
3009 (new_dwarf_expr_context, free_dwarf_expr_context)
3010 (make_cleanup_free_dwarf_expr_context): Don't declare.
3011 * dwarf2-frame.c (execute_stack_op): Stack-allocate
3012 dwarf_expr_context. Remove cleanups.
3013 (dwarf_expr_context): Rename from new_dwarf_expr_context. Turn
3015 (free_dwarf_expr_context, free_dwarf_expr_context_cleanup):
3017 (~dwarf_expr_context): Rename from
3018 make_cleanup_free_dwarf_expr_context. Turn into destructor.
3020 2016-10-21 Tom Tromey <tom@tromey.com>
3022 * dwarf2loc.c: Include <vector>.
3023 (read_pieced_value, write_pieced_value)
3024 (dwarf2_compile_expr_to_ax): Use std::vector.
3026 2016-10-21 Tom Tromey <tom@tromey.com>
3028 * stack.c (print_stack_frame_to_uiout): Use scoped_restore.
3029 * ui-out.c (make_cleanup_restore_current_uiout)
3030 (restore_current_uiout_cleanup): Remove.
3031 * infrun.c (print_stop_event): Use scoped_restore.
3032 * ui-out.h (make_cleanup_restore_current_uiout): Don't declare.
3034 2016-10-21 Tom Tromey <tom@tromey.com>
3036 * elfread.c (elf_read_minimal_symbols): Use gdb::unique_ptr.
3038 2016-10-21 Tom Tromey <tom@tromey.com>
3040 * cli/cli-dump.c (dump_memory_to_file): Use gdb::unique_ptr.
3041 (restore_binary_file): Likewise.
3043 2016-10-21 Tom Tromey <tom@tromey.com>
3045 * maint.h (scoped_command_stats): New class.
3046 (make_command_stats_cleanup): Don't declare.
3047 * maint.c (struct cmd_stats): Remove.
3048 (~scoped_command_stats): Rename from report_command_stats. Now a
3050 (scoped_command_stats): Rename from make_command_stats_cleanup.
3052 * main.c (captured_main_1): New function. Use
3053 scoped_command_stats.
3054 (captured_main): Call captured_main_1.
3055 * event-top.c (command_handler): Use scoped_command_stats.
3057 2016-10-21 Tom Tromey <tom@tromey.com>
3059 * mi/mi-main.c (mi_cmd_data_read_memory): Use gdb::unique_ptr.
3060 Remove some cleanups.
3062 2016-10-21 Tom Tromey <tom@tromey.com>
3064 * tui/tui-interp.c (tui_on_normal_stop, tui_on_signal_received)
3065 (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
3066 (tui_on_no_history, tui_on_user_selected_context_changed):
3068 * top.h (switch_thru_all_uis): New class.
3069 (SWITCH_THRU_ALL_UIS): Rewrite.
3070 (make_cleanup_restore_current_ui, switch_thru_all_uis_init)
3071 (switch_thru_all_uis_cond, switch_thru_all_uis_next): Don't
3073 * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
3074 (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
3075 (mi_inferior_exit, mi_inferior_removed, mi_on_signal_received)
3076 (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
3077 (mi_on_no_history, mi_on_normal_stop, mi_traceframe_changed)
3078 (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
3079 (mi_breakpoint_created, mi_breakpoint_deleted)
3080 (mi_breakpoint_modified, mi_output_running_pid, mi_on_resume)
3081 (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
3082 (mi_memory_changed, mi_user_selected_context_changed): Update.
3083 * infrun.c (all_uis_check_sync_execution_done)
3084 (all_uis_on_sync_execution_starting, normal_stop): Update.
3085 * event-top.c (restore_ui_cleanup)
3086 (make_cleanup_restore_current_ui, switch_thru_all_uis_init)
3087 (switch_thru_all_uis_cond, switch_thru_all_uis_next): Remove.
3088 * cli/cli-interp.c (cli_on_normal_stop, cli_on_signal_received)
3089 (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
3090 (cli_on_no_history, cli_on_user_selected_context_changed):
3092 * breakpoint.c (watchpoint_check): Update.
3094 2016-10-21 Tom Tromey <tom@tromey.com>
3096 * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab): Add
3097 "reader" argument. Update.
3098 (xcoff_initial_scan): Update.
3099 * symfile.h (mdebug_build_psymtabs): Add "reader" argument.
3100 * mipsread.c (mipscoff_symfile_read): Update.
3101 (read_alphacoff_dynamic_symtab): Add "reader" argument. Update.
3102 * minsyms.h (minimal_symbol_reader) <record, record_full>:
3104 <m_msym_bunch, m_msym_bunch_index, m_msym_count>: New members.
3105 <record_with_info>: New function, renamed from
3106 prim_record_minimal_symbol_and_info.
3107 * minsyms.c (msym_bunch, msym_bunch_index, msym_count): Remove
3109 (minimal_symbol_reader): Initialize new members.
3110 (minimal_symbol_reader::record): Renamed from
3111 prim_record_minimal_symbol.
3112 (minimal_symbol_reader::record_full): Renamed from
3113 prim_record_minimal_symbol_full.
3114 (prim_record_minimal_symbol_and_info): Move to minsyms.h; rename.
3115 * mdebugread.c (mdebug_build_psymtabs, parse_partial_symbols)
3116 (record_minimal_symbol): Add "reader" argument. Update.
3117 (elfmdebug_build_psymtabs): Update.
3118 * machoread.c (macho_symtab_add_minsym, macho_symtab_read): Add
3119 "reader" argument. Update.
3120 (macho_symfile_read): Update.
3121 * elfread.c (record_minimal_symbol, elf_symtab_read)
3122 (elf_rel_plt_read): Add "reader" argument. Update.
3123 (elf_read_minimal_symbols): Update.
3124 * dbxread.c (record_minimal_symbol, read_dbx_dynamic_symtab)
3125 (read_dbx_symtab): Add "reader" argument. Update.
3126 (dbx_symfile_read): Update.
3127 * coffread.c (record_minimal_symbol, coff_symtab_read): Add
3128 "reader" argument. Update.
3129 (coff_symfile_read): Update.
3130 * coff-pe-read.h (read_pe_exported_syms): Add "reader" argument.
3131 * coff-pe-read.c (add_pe_exported_sym, add_pe_forwarded_sym)
3132 (read_pe_exported_syms): Add "reader" argument. Update.
3134 2016-10-21 Tom Tromey <tom@tromey.com>
3136 * xcoffread.c (xcoff_initial_scan): Update.
3137 * mipsread.c (mipscoff_symfile_read): Update.
3138 * minsyms.c (minimal_symbol_reader): Add obj argument.
3140 (install): Remove objfile argument. Update.
3141 * mdebugread.c (elfmdebug_build_psymtabs): Update.
3142 * machoread.c (macho_symfile_read): Update.
3143 * elfread.c (elf_read_minimal_symbols): Update.
3144 * dbxread.c (dbx_symfile_read): Update.
3145 * coffread.c (coff_symfile_read): Update.
3146 * minsyms.h (minimal_symbol_reader): Add m_objfile member.
3147 (constructor): Add objfile argument.
3148 (minimal_symbol_reader::install): Remove objfile argument.
3150 2016-10-21 Tom Tromey <tom@tromey.com>
3152 * xcoffread.c (xcoff_initial_scan): Use
3153 minimal_symbol_reader.
3154 * mipsread.c (mipscoff_symfile_read): Use
3155 minimal_symbol_reader.
3156 * minsyms.h (minimal_symbol_reader): New class.
3157 (init_minimal_symbol_collection)
3158 (make_cleanup_discard_minimal_symbols, install_minimal_symbols):
3160 * minsyms.c (minimal_symbol_reader): Renamed from
3161 init_minimal_symbol_collection, turned into constructor.
3162 (~minimal_symbol_reader): Renamed from
3163 do_discard_minimal_symbols_cleanup, turned into destructor.
3164 (make_cleanup_discard_minimal_symbols): Remove.
3165 (minimal_symbol_reader::install): Rename form
3166 install_minimal_symbols.
3167 * mdebugread.c (elfmdebug_build_psymtabs): Use
3168 minimal_symbol_reader.
3169 * machoread.c (macho_symfile_read): Use
3170 minimal_symbol_reader.
3171 * elfread.c (elf_read_minimal_symbols): Use
3172 minimal_symbol_reader.
3173 * dbxread.c (dbx_symfile_read): Use minimal_symbol_reader.
3174 * coffread.c (coff_symfile_read): Use
3175 minimal_symbol_reader.
3177 2016-10-21 Tom Tromey <tom@tromey.com>
3179 * top.c (new_ui_command, wait_sync_command_done)
3180 (gdb_readline_wrapper): Use scoped_restore.
3181 * infrun.c (fetch_inferior_event): Use scoped_restore.
3182 * infcall.c (call_thread_fsm_should_stop): Use scoped_restore.
3184 2016-10-21 Tom Tromey <tom@tromey.com>
3186 * utils.c (make_cleanup_restore_ui_file, do_restore_ui_file)
3187 (struct restore_ui_file_closure): Remove.
3188 * utils.h (make_cleanup_restore_ui_file): Don't declare.
3189 * guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
3191 * top.c (execute_command_to_string): Use scoped_restore.
3193 2016-10-21 Tom Tromey <tom@tromey.com>
3195 * common/scoped_restore.h: New file.
3196 * utils.h: Include scoped_restore.h.
3197 * top.c (execute_command_to_string): Use scoped_restore.
3198 * python/python.c (python_interactive_command): Use
3200 (python_command, execute_gdb_command): Likewise.
3201 * printcmd.c (do_one_display): Use scoped_restore.
3202 * mi/mi-main.c (exec_continue): Use scoped_restore.
3203 * mi/mi-cmd-var.c (mi_cmd_var_assign): Use scoped_restore.
3204 * linux-fork.c (checkpoint_command): Use scoped_restore.
3205 * infrun.c (restore_execution_direction): Remove.
3206 (fetch_inferior_event): Use scoped_restore.
3207 * compile/compile.c (compile_file_command): Use
3209 (compile_code_command, compile_print_command): Likewise.
3210 * cli/cli-script.c (execute_user_command): Use
3212 (while_command, if_command, script_from_file): Likewise.
3213 * arm-tdep.c (arm_insert_single_step_breakpoint): Use
3216 2016-10-21 Tom Tromey <tom@tromey.com>
3218 * xcoffread.c (read_xcoff_symtab): Make "filestring" const.
3220 2016-10-21 Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>
3221 Ulrich Weigand <uweigand@de.ibm.com>
3223 * xcoffread.c (read_xcoff_symtab): Make name of current file as
3224 pst->filename instead of _start_ in AIX.
3226 2016-10-21 Philipp Rudo <prudo@linux.vnet.ibm.com>
3228 * solist.h (struct target_so_ops): Delete special_symbol_handling
3230 * solib.c (solib_add, reload_shared_libraries): Adjust.
3231 * solib-aix.c (solib_aix_special_symbol_handling): Delete
3232 (_initialize_solib_aix): Adjust
3233 * solib-darwin.c (darwin_special_symbol_handling): Delete
3234 (_initialize_darwin_solib): Adjust
3235 * solib-dsbt.c (dsbt_special_symbol_handling): Delete
3236 (_initialize_dsbt_solib): Adjust
3237 * solib-frv.c (frv_special_symbol_handling): Delete
3238 (_initialize_frv_solib): Adjust
3239 * solib-svr4.c (svr4_special_symbol_handling): Delete
3240 (_initialize_svr4_solib): Adjust
3241 * solib-target.c (solib_target_special_symbol_handling): Delete
3242 (_initialize_solib_target): Adjust
3244 2016-10-20 Yao Qi <yao.qi@linaro.org>
3246 * configure.tgt: Don't configure if target is *-*-vxworks*.
3248 2016-10-19 Pedro Alves <palves@redhat.com>
3250 * config.in: Regenerate.
3252 2016-10-18 Pedro Alves <palves@redhat.com>
3254 * common/common-defs.h (__STDC_CONSTANT_MACROS)
3255 (__STDC_LIMIT_MACROS): Delete.
3257 2016-10-18 Pedro Alves <palves@redhat.com>
3259 * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
3260 2692e23a48e21f6daa029e8af9f1a143b7532f47.
3261 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
3263 * gnulib/import/Makefile: Update.
3264 * gnulib/import/alloca: Update.
3265 * gnulib/import/basename-lgpl: Update.
3266 * gnulib/import/canonicalize-lgpl: Update.
3267 * gnulib/import/config: Update.
3268 * gnulib/import/dirent: Update.
3269 * gnulib/import/dirfd: Update.
3270 * gnulib/import/dirname-lgpl: Update.
3271 * gnulib/import/dirname.h: Update.
3272 * gnulib/import/dosname.h: Update.
3273 * gnulib/import/errno: Update.
3274 * gnulib/import/extra/snippet/arg-nonnull.h: Update.
3275 * gnulib/import/extra/snippet/c++defs.h: Update.
3276 * gnulib/import/extra/snippet/warn-on-use.h: Update.
3277 * gnulib/import/extra/update-copyright: Update.
3278 * gnulib/import/flexmember.h: Update.
3279 * gnulib/import/float+.h: Update.
3280 * gnulib/import/float: Update.
3281 * gnulib/import/float: Update.
3282 * gnulib/import/fnmatch: Update.
3283 * gnulib/import/fnmatch: Update.
3284 * gnulib/import/fnmatch_loop: Update.
3285 * gnulib/import/fpucw.h: Update.
3286 * gnulib/import/frexp: Update.
3287 * gnulib/import/frexpl: Update.
3288 * gnulib/import/gettimeofday: Update.
3289 * gnulib/import/hard-locale: Update.
3290 * gnulib/import/hard-locale.h: Update.
3291 * gnulib/import/inttypes: Update.
3292 * gnulib/import/isnan: Update.
3293 * gnulib/import/isnand-nolibm.h: Update.
3294 * gnulib/import/isnand: Update.
3295 * gnulib/import/isnanl-nolibm.h: Update.
3296 * gnulib/import/isnanl: Update.
3297 * gnulib/import/itold: Update.
3298 * gnulib/import/limits: Update.
3299 * gnulib/import/localcharset: Update.
3300 * gnulib/import/localcharset.h: Update.
3301 * gnulib/import/lstat: Update.
3302 * gnulib/import/m4/00gnulib: Update.
3303 * gnulib/import/m4/absolute-header: Update.
3304 * gnulib/import/m4/alloca: Update.
3305 * gnulib/import/m4/canonicalize: Update.
3306 * gnulib/import/m4/codeset: Update.
3307 * gnulib/import/m4/configmake: Update.
3308 * gnulib/import/m4/dirent_h: Update.
3309 * gnulib/import/m4/dirfd: Update.
3310 * gnulib/import/m4/dirname: Update.
3311 * gnulib/import/m4/double-slash-root: Update.
3312 * gnulib/import/m4/eealloc: Update.
3313 * gnulib/import/m4/errno_h: Update.
3314 * gnulib/import/m4/exponentd: Update.
3315 * gnulib/import/m4/exponentl: Update.
3316 * gnulib/import/m4/extensions: Update.
3317 * gnulib/import/m4/extern-inline: Update.
3318 * gnulib/import/m4/fcntl-o: Update.
3319 * gnulib/import/m4/flexmember: Update.
3320 * gnulib/import/m4/float_h: Update.
3321 * gnulib/import/m4/fnmatch: Update.
3322 * gnulib/import/m4/fpieee: Update.
3323 * gnulib/import/m4/frexp: Update.
3324 * gnulib/import/m4/frexpl: Update.
3325 * gnulib/import/m4/gettimeofday: Update.
3326 * gnulib/import/m4/glibc21: Update.
3327 * gnulib/import/m4/gnulib-cache: Update.
3328 * gnulib/import/m4/gnulib-common: Update.
3329 * gnulib/import/m4/gnulib-comp: Update.
3330 * gnulib/import/m4/gnulib-tool: Update.
3331 * gnulib/import/m4/hard-locale: Update.
3332 * gnulib/import/m4/include_next: Update.
3333 * gnulib/import/m4/inttypes-pri: Update.
3334 * gnulib/import/m4/inttypes: Update.
3335 * gnulib/import/m4/isnand: Update.
3336 * gnulib/import/m4/isnanl: Update.
3337 * gnulib/import/m4/largefile: Update.
3338 * gnulib/import/m4/limits-h: Update.
3339 * gnulib/import/m4/localcharset: Update.
3340 * gnulib/import/m4/locale-fr: Update.
3341 * gnulib/import/m4/locale-ja: Update.
3342 * gnulib/import/m4/locale-zh: Update.
3343 * gnulib/import/m4/longlong: Update.
3344 * gnulib/import/m4/lstat: Update.
3345 * gnulib/import/m4/malloc: Update.
3346 * gnulib/import/m4/malloca: Update.
3347 * gnulib/import/m4/math_h: Update.
3348 * gnulib/import/m4/mbrtowc: Update.
3349 * gnulib/import/m4/mbsinit: Update.
3350 * gnulib/import/m4/mbsrtowcs: Update.
3351 * gnulib/import/m4/mbstate_t: Update.
3352 * gnulib/import/m4/memchr: Update.
3353 * gnulib/import/m4/memmem: Update.
3354 * gnulib/import/m4/mmap-anon: Update.
3355 * gnulib/import/m4/multiarch: Update.
3356 * gnulib/import/m4/nocrash: Update.
3357 * gnulib/import/m4/off_t: Update.
3358 * gnulib/import/m4/pathmax: Update.
3359 * gnulib/import/m4/rawmemchr: Update.
3360 * gnulib/import/m4/readlink: Update.
3361 * gnulib/import/m4/rename: Update.
3362 * gnulib/import/m4/rmdir: Update.
3363 * gnulib/import/m4/signal_h: Update.
3364 * gnulib/import/m4/ssize_t: Update.
3365 * gnulib/import/m4/stat: Update.
3366 * gnulib/import/m4/stdbool: Update.
3367 * gnulib/import/m4/stddef_h: Update.
3368 * gnulib/import/m4/stdint: Update.
3369 * gnulib/import/m4/stdio_h: Update.
3370 * gnulib/import/m4/stdlib_h: Update.
3371 * gnulib/import/m4/strchrnul: Update.
3372 * gnulib/import/m4/string_h: Update.
3373 * gnulib/import/m4/strstr: Update.
3374 * gnulib/import/m4/strtok_r: Update.
3375 * gnulib/import/m4/sys_socket_h: Update.
3376 * gnulib/import/m4/sys_stat_h: Update.
3377 * gnulib/import/m4/sys_time_h: Update.
3378 * gnulib/import/m4/sys_types_h: Update.
3379 * gnulib/import/m4/time_h: Update.
3380 * gnulib/import/m4/unistd_h: Update.
3381 * gnulib/import/m4/warn-on-use: Update.
3382 * gnulib/import/m4/wchar_h: Update.
3383 * gnulib/import/m4/wchar_t: Update.
3384 * gnulib/import/m4/wctype_h: Update.
3385 * gnulib/import/m4/wint_t: Update.
3386 * gnulib/import/malloc: Update.
3387 * gnulib/import/malloca: Update.
3388 * gnulib/import/malloca.h: Update.
3389 * gnulib/import/math: Update.
3390 * gnulib/import/math: Update.
3391 * gnulib/import/mbrtowc: Update.
3392 * gnulib/import/mbsinit: Update.
3393 * gnulib/import/mbsrtowcs-impl.h: Update.
3394 * gnulib/import/mbsrtowcs-state: Update.
3395 * gnulib/import/mbsrtowcs: Update.
3396 * gnulib/import/memchr: Update.
3397 * gnulib/import/memmem: Update.
3398 * gnulib/import/pathmax.h: Update.
3399 * gnulib/import/rawmemchr: Update.
3400 * gnulib/import/readlink: Update.
3401 * gnulib/import/ref-add.sin: Update.
3402 * gnulib/import/ref-del.sin: Update.
3403 * gnulib/import/rename: Update.
3404 * gnulib/import/rmdir: Update.
3405 * gnulib/import/same-inode.h: Update.
3406 * gnulib/import/signal: Update.
3407 * gnulib/import/stat: Update.
3408 * gnulib/import/stdbool: Update.
3409 * gnulib/import/stddef: Update.
3410 * gnulib/import/stdint: Update.
3411 * gnulib/import/stdio: Update.
3412 * gnulib/import/stdlib: Update.
3413 * gnulib/import/str-two-way.h: Update.
3414 * gnulib/import/strchrnul: Update.
3415 * gnulib/import/streq.h: Update.
3416 * gnulib/import/string: Update.
3417 * gnulib/import/stripslash: Update.
3418 * gnulib/import/strnlen1: Update.
3419 * gnulib/import/strnlen1.h: Update.
3420 * gnulib/import/strstr: Update.
3421 * gnulib/import/strtok_r: Update.
3422 * gnulib/import/sys_stat: Update.
3423 * gnulib/import/sys_time: Update.
3424 * gnulib/import/sys_types: Update.
3425 * gnulib/import/time: Update.
3426 * gnulib/import/unistd: Update.
3427 * gnulib/import/unistd: Update.
3428 * gnulib/import/verify.h: Update.
3429 * gnulib/import/wchar: Update.
3430 * gnulib/import/wctype: Update.
3431 * gnulib/import/flexmember.h: New file.
3432 * gnulib/import/hard-locale.c: New file.
3433 * gnulib/import/hard-locale.h: New file.
3434 * gnulib/import/limits.in.h: New file.
3435 * gnulib/import/m4/flexmember.m4: New file.
3436 * gnulib/import/m4/hard-locale.m4: New file.
3437 * gnulib/import/m4/limits-h.m4: New file.
3439 2016-10-18 Pedro Alves <palves@redhat.com>
3441 * common/common-defs.h: Include "gdb_unique_ptr.h".
3442 * common/gdb_unique_ptr.h: New.
3444 2016-10-18 Maciej W. Rozycki <macro@imgtec.com>
3446 * i386-tdep.c (i386_mpx_info_bounds): Make sure the architecture
3447 is `bfd_arch_i386' before proceeding.
3448 (i386_mpx_set_bounds): Likewise.
3450 2016-10-18 Maciej W. Rozycki <macro@imgtec.com>
3452 * tilegx-tdep.c (tilegx_analyze_prologue): Use the `long long'
3453 type for `operands'.
3455 2016-10-17 Simon Marchi <simon.marchi@ericsson.com>
3457 * mi/mi-main.c (mi_cmd_trace_save): Check if argument is present
3460 2016-10-17 Pedro Alves <palves@redhat.com>
3462 * charset.h (class wchar_iterator) [PHONY_ICONV] <m_desc>: Use
3465 2016-10-14 Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>
3466 Ulrich Weigand <uweigand@de.ibm.com>
3468 * solib-aix.c (solib_aix_bfd_open): Call solib_find so that sysroot
3469 path is set properly if program has a dependency on .a archive and
3470 sysroot is set via set sysroot command.
3472 2016-10-14 Markus Metzger <markus.t.metzger@intel.com>
3474 * nat/linux-btrace.c: Remove leftover comment.
3476 2016-10-14 Eli Zaretskii <eliz@gnu.org>
3478 * common/common-defs.h [HAVE_STRINGS_H]: Include strings.h if
3479 available, to get prototypes of 'strcasecmp' and 'strncasecmp'.
3481 2016-10-13 Pedro Alves <palves@redhat.com>
3483 * contrib/ari/gdb_ari.sh (boolean): Suggest bool instead.
3484 (false, true): Remove checks.
3486 2016-10-12 Tom Tromey <tom@tromey.com>
3488 * machoread.c (macho_symfile_read_all_oso): Use std::string.
3490 2016-10-12 Tom Tromey <tom@tromey.com>
3492 * tracepoint.c (trace_dump_command): Remove unnecessary
3495 2016-10-12 Tom Tromey <tom@tromey.com>
3497 * valprint.c (generic_emit_char, count_next_character)
3498 (generic_printstr): Update.
3499 * charset.c (struct wchar_iterator): Move to charset.h.
3500 (wchar_iterator::wchar_iterator): Rename from
3501 make_wchar_iterator, turn into a constructor.
3502 (wchar_iterator::~wchar_iterator): Rename from
3503 do_cleanup_iterator, turn into a destructor.
3504 (make_cleanup_wchar_iterator): Remove.
3505 (wchar_iterator::iterate): Rename from wchar_iterate. Remove
3506 "iter" argument. Update.
3507 * charset.h: Include <vector>.
3508 (class wchar_iterator): New class, from old struct
3510 (make_wchar_iterator, make_cleanup_wchar_iterator): Don't
3513 2016-10-12 Tom Tromey <tom@tromey.com>
3515 * selftest.c: Include <vector>, not "vec.h".
3516 (self_test_function_ptr): Remove.
3517 (tests): Now a std::vector.
3518 (register_self_test, run_self_tests): Update.
3520 2016-10-13 Pedro Alves <palves@redhat.com>
3521 Tom Tromey <tom@tromey.com>
3523 * tid-parse.h (tid_range_parser): New class.
3524 (enum tid_range_state): Move into tid_range_parser's scope.
3525 Remove TID_RANGE_ prefix from all values.
3526 (tid_range_parser_get_tid, tid_range_parser_get_tid_range)
3527 (tid_range_parser_star_range, tid_range_parser_finished)
3528 (tid_range_parser_skip, tid_range_parser_qualified): Don't
3530 (tid_is_in_list): Update comment.
3531 * tid-parse.c (tid_range_parser::tid_range_parser): New.
3532 (init, finished, get_string, skip, tid_is_qualified)
3533 (get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
3535 (tid_is_in_list): Adjust.
3536 * cli/cli-utils.h (number_or_range_parser): New class.
3537 (init_number_or_range, get_number_or_range)
3538 (number_range_setup_range): Don't declare.
3540 (number_or_range_parser::number_or_range_parser): New.
3541 (init_number_or_range, get_number_or_range)
3542 (number_range_setup_range): Rename; turn into methods.
3543 (number_is_in_list): Adjust.
3544 * breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
3545 (trace_pass_command, get_tracepoint_by_number): Adjust.
3546 * breakpoint.h (get_tracepoint_by_number): Adjust.
3547 * inferior.c (detach_inferior_command, kill_inferior_command)
3548 (remove_inferior_command): Adjust.
3549 * linespec.c (decode_line_2): Adjust.
3550 * memattr.c (mem_enable_command, mem_disable_command)
3551 (mem_delete_command): Adjust.
3552 * printcmd.c (map_display_numbers): Adjust.
3553 * reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
3554 * thread.c (thread_apply_command): Adjust.
3556 2016-10-12 Anton Kolesov <anton.kolesov@synopsys.com>
3558 * arc-newlib-tdep.c: New file.
3559 * configure.tgt: Add newlib support for ARC.
3561 2016-10-12 Anton Kolesov <anton.kolesov@synopsys.com>
3563 * arc-tdep.h (struct gdbarch_tdep) <jb_pc>: New field.
3564 * arc-tdep.c (arc_get_longjmp_target): New function.
3565 (arc_gdbarch_init): Set get_longjmp_target if jb_pc is non-negative.
3566 (arc_dump_tdep): Print jb_pc.
3568 2016-10-12 Anton Kolesov <anton.kolesov@synopsys.com>
3570 * arc-tdep.h (struct gdbarch_tdep): New.
3571 * arc-tdep.c (arc_gdbarch_init): Allocate gdbarch_tdep.
3573 2016-10-12 Yao Qi <yao.qi@linaro.org>
3576 * aarch64-tdep.c: Replace 32 with AARCH64_D_REGISTER_COUNT.
3577 (aarch64_analyze_prologue): Extend array 'regs' for D registers.
3578 Assert that operand 0 and 1 can be X or D registers. Update
3579 register number for D registers. Update registers in frame
3581 * aarch64-tdep.h (AARCH64_D_REGISTER_COUNT): New macro.
3583 2016-10-10 Yao Qi <yao.qi@linaro.org>
3585 * arch/arm.h (enum arm_breakpoint_kinds): New.
3586 * arm-tdep.c (arm_remote_breakpoint_from_pc): Use
3589 2016-10-10 Yao Qi <yao.qi@linaro.org>
3591 * m32c-tdep.c (m32c_gdbarch_init): Rename local 'arch' by
3594 2016-10-10 Yao Qi <yao.qi@linaro.org>
3596 * v850-tdep.c (v850_breakpoint_from_pc): Use the right
3597 breakpoint instruction.
3598 (v850_dbtrap_breakpoint_from_pc): Remove.
3599 (v850_gdbarch_init): Update.
3601 2016-10-08 Simon Marchi <simon.marchi@polymtl.ca>
3603 * ui-out.c (push_level): Remove "id" parameter.
3604 (ui_out_begin): Update call.
3606 2016-10-07 Joel Brobecker <brobecker@adacore.com>
3610 2016-10-07 Markus Metzger <markus.t.metzger@intel.com>
3612 * python/python.c (gdbpy_decode_line): Call
3613 string_to_event_location_basic instead of new_linespec_location.
3615 2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
3617 * target.c (target_supports_multi_process): New function, moved
3619 * target.h (target_supports_multi_process): ... here. Remove
3621 * target/target.h (target_supports_multi_process): New prototype.
3623 2016-10-06 Pedro Alves <palves@redhat.com>
3625 * cp-valprint.c (vtbl_ptr_name): Write "extern const" instead of
3627 * stub-termcap.c: Remove __cplusplus checks.
3628 * common/common-defs.h [!__cplusplus] (EXTERN_C, EXTERN_C_PUSH,
3629 EXTERN_C_POP): Delete.
3630 * common/common-exceptions.h (GDB_XCPT_SJMP): Update comments.
3631 (GDB_XCPT) [!__cplusplus]: Delete.
3632 (throw_exception, throw_exception_sjlj): Update comments.
3633 * guile/guile-internal.h (as_a_scm_t_subr) [!__cplusplus]: Delete.
3634 * guile/guile.c (extension_language_guile): Write "extern const"
3635 instead of EXPORTED_CONST.
3636 * features/feature_to_c.sh: Don't emit !__cplusplus code. Write
3637 "extern const" instead of EXPORTED_CONST.
3639 2016-10-06 Doug Evans <dje@google.com>
3641 * python/py-value.c (valpy_long): Handle unsigned values.
3643 2016-10-06 Simon Marchi <simon.marchi@ericsson.com>
3645 * frame.h: Forward-declare struct ui_out.
3647 2016-10-06 Tom Tromey <tom@tromey.com>
3649 * MAINTAINERS: Remove Java test maintainer.
3650 * varobj.h (java_varobj_ops): Don't declare.
3651 * valprint.h (struct value_print_options)
3652 <pascal_static_field_print>: Update comment.
3653 * utils.c (producer_is_gcc): Remove java reference.
3654 * symtab.h (struct general_symbol_info): Remove java references.
3655 (SYMBOL_SEARCH_NAME): Likewise.
3656 * objfiles.c (allocate_objfile): Update comment.
3657 * linespec.c (find_linespec_symbols): Remove java references.
3658 * gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove
3660 * gdbtypes.h (struct cplus_struct_type) <is_java>: Remove.
3661 (TYPE_CPLUS_REALLY_JAVA): Remove.
3662 * c-varobj.c (enum vsections): Update comment.
3663 * symtab.c (symbol_set_language, symbol_set_names)
3664 (symbol_natural_name, symbol_demangled_name)
3665 (demangle_for_lookup, symbol_matches_domain)
3666 (default_make_symbol_completion_list_break_on_1): Remove java
3668 (JAVA_PREFIX, JAVA_PREFIX_LEN): Remove.
3669 * psymtab.c (match_partial_symbol, psymtab_search_name)
3670 (lookup_partial_symbol): Remove java references.
3671 * dwarf2read.c (find_slot_in_mapped_hash): Remove java references.
3672 (add_partial_symbol, dwarf2_compute_name, dwarf2_physname)
3673 (dwarf2_add_member_fn, is_vtable_name, read_structure_type)
3674 (process_structure_scope, read_subroutine_type)
3675 (read_subrange_type, load_partial_dies)
3676 (new_symbol_full, determine_prefix, typename_concat)
3677 (dwarf2_name): Remove java references.
3678 (set_cu_language): Treat Java as C++.
3679 * c-typeprint.c (c_type_print_args): Remove java reference.
3680 * defs.h (enum language) <language_java>: Remove.
3681 * Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES)
3682 (YYOBJ, local-maintainer-clean): Don't mention java files.
3683 * jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c,
3684 jv-varobj.c: Remove.
3686 2016-10-06 Maciej W. Rozycki <macro@imgtec.com>
3688 * mips-tdep.c (mips_pseudo_register_type): Make FCRs always
3691 2016-10-06 Maciej W. Rozycki <macro@imgtec.com>
3693 * mips-tdep.c (mips_pseudo_register_type): Rearrange comments
3696 2016-10-06 Markus Metzger <markus.t.metzger@intel.com>
3698 * stack.c (frame_info): Call val_print_not_saved instead of
3699 val_print_unavailable if frame_id check fails.
3701 2016-10-06 Pedro Alves <palves@redhat.com>
3703 * jit.c (free_objfile_data): Delete the JIT breakpoint and clear
3704 the cached code address.
3706 2016-10-06 Doug Evans <dje@google.com>
3708 * features/aarch64-core.xml (cpsr_flags): Elide "type" and specify
3709 "end" in all fields.
3710 * features/aarch64.c: Regenerate.
3711 * features/i386/32bit-mpx.xml (_bndcfgu): Specify type of "preserved"
3712 and "enabled" fields. Correct size of "enabled" field.
3713 * features/i386/64bit-mpx.xml (_bndcfgu): Specify type of "preserved"
3714 and "enabled" fields.
3715 * features/i386/i386-avx-mpx-linux.c: Regenerate.
3716 * features/i386/i386-avx-mpx.c: Regenerate.
3717 * features/i386/i386-avx512-linux.c: Regenerate.
3718 * features/i386/i386-avx512.c: Regenerate.
3719 * features/i386/i386-mpx-linux.c: Regenerate.
3720 * features/i386/i386-mpx.c: Regenerate.
3721 * features/arc-arcompact.c: Regenerate.
3722 * features/arc-v2.c: Regenerate.
3723 * xml-tdesc.c (tdesc_start_field): Require "end" spec. Single bit
3724 fields default to "bool" type.
3726 Revert 2016-03-15 Doug Evans <dje@google.com>
3727 * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
3728 * features/i386/32bit-sse.xml (i386_eflags): Ditto.
3729 * features/i386/64bit-core.xml (i386_eflags): Ditto.
3730 * features/i386/64bit-sse.xml (i386_eflags): Ditto.
3731 * features/i386/x32-core.xml (i386_eflags): Ditto.
3733 2016-10-05 Tom Tromey <tom@tromey.com>
3735 PR breakpoints/20653:
3736 * location.c (string_to_explicit_location): Use NULL, not '\0'.
3738 2016-10-05 Tom Tromey <tom@tromey.com>
3741 * psymtab.c (psymbol_compare): Correctly compare "ginfo.value"
3744 2016-10-05 Andreas Arnez <arnez@linux.vnet.ibm.com>
3746 * dwarf2expr.c (dwarf_expr_require_composition): Allow
3748 (execute_stack_op): Use dwarf_expr_require_composition instead of
3751 2016-10-05 Anton Kolesov <anton.kolesov@synopsys.com>
3753 * arc-tdep.c (arc_frame_prev_register): Remove annoying log message.
3755 2016-10-05 Yao Qi <yao.qi@linaro.org>
3757 * features/Makefile (WHICH): Add
3758 rs6000/powerpc-isa205-32l, rs6000/powerpc-isa205-64l,
3759 rs6000/powerpc-isa205-altivec32l, rs6000/powerpc-isa205-altivec64l,
3760 rs6000/powerpc-isa205-vsx32l and rs6000/powerpc-isa205-vsx64l.
3761 * regformats/rs6000/powerpc-isa205-32l.dat: Regenerated.
3762 * regformats/rs6000/powerpc-isa205-64l.dat: Likewise.
3763 * regformats/rs6000/powerpc-isa205-altivec32l.dat: Likewise.
3764 * regformats/rs6000/powerpc-isa205-altivec64l.dat: Likewise.
3765 * regformats/rs6000/powerpc-isa205-vsx32l.dat: Likewise.
3766 * regformats/rs6000/powerpc-isa205-vsx64l.dat: Likewise.
3768 2016-10-05 Yao Qi <yao.qi@linaro.org>
3770 * features/Makefile (XMLTOC): Add s390-tevx-linux64.xml,
3771 s390-vx-linux64.xml, s390x-tevx-linux64.xml and
3772 s390x-vx-linux64.xml.
3774 2016-10-05 Yao Qi <yao.qi@linaro.org>
3776 * features/Makefile: Remove i386/*-expedite. Add i386-expedite,
3777 amd64-expedite, and x32-expedite.
3779 2016-10-05 Terry Guo <terry.guo@arm.com>
3780 Yao Qi <yao.qi@linaro.org>
3782 * arm-tdep.c: Adjust includes.
3783 * features/Makefile (WHICH): Add "arm/" directory to arm
3784 target descriptions.
3786 (arm/arm-with-iwmmxt.dat): Adjust the path for
3788 * features/arm-core.xml: Moved to ...
3789 * features/arm/arm-core.xml: ... it.
3790 * features/arm-fpa.xml: Moved to ...
3791 * features/arm/arm-fpa.xml: ... it.
3792 * features/arm-m-profile.xml: Moved to ...
3793 * features/arm/arm-m-profile.xm: ... it.
3794 * features/arm-vfpv2.xml: Moved to ...
3795 * features/arm/arm-vfpv2.xm: ... it.
3796 * features/arm-vfpv3.xml: Moved to ...
3797 * features/arm/arm-vfpv3.xml: ... it.
3798 * features/arm-with-iwmmxt.c: Moved to ...
3799 * features/arm/arm-with-iwmmxt.c: ... it.
3800 * features/arm-with-iwmmxt.xml: Moved to ...
3801 * features/arm/arm-with-iwmmxt.xml: ... it.
3802 * features/arm-with-m-fpa-layout.c: Moved to ...
3803 * features/arm/arm-with-m-fpa-layout.c: ... it.
3804 * features/arm-with-m-fpa-layout.xml: Moved to ...
3805 * features/arm/arm-with-m-fpa-layout.xml: ... it.
3806 * features/arm-with-m-vfp-d16.c: Moved to ...
3807 * features/arm/arm-with-m-vfp-d16.c: ... it.
3808 * features/arm-with-m-vfp-d16.xml: Moved to ...
3809 * features/arm/arm-with-m-vfp-d16.xml: ... it.
3810 * features/arm-with-m.c: Moved to ...
3811 * features/arm/arm-with-m.c: ... it.
3812 * features/arm-with-m.xml: Moved to ...
3813 * features/arm/arm-with-m.xm: ... it.
3814 * features/arm-with-neon.c: Moved to ...
3815 * features/arm/arm-with-neon.c: ... it.
3816 * features/arm-with-neon.xml: Moved to ...
3817 * features/arm/arm-with-neon.xml: ... it.
3818 * features/arm-with-vfpv2.c: Moved to ...
3819 * features/arm/arm-with-vfpv2.c: ... it.
3820 * features/arm-with-vfpv2.xml: Moved to ...
3821 * features/arm/arm-with-vfpv2.xml: ... it.
3822 * features/arm-with-vfpv3.c: Moved to ...
3823 * features/arm/arm-with-vfpv3.c: ... it.
3824 * features/arm-with-vfpv3.xml: Moved to ...
3825 * features/arm/arm-with-vfpv3.xml: ... it.
3826 * features/xscale-iwmmxt.xml: Moved to ...
3827 * features/arm/xscale-iwmmxt.xml: ... it.
3829 2016-10-03 Antoine Tremblay <antoine.tremblay@ericsson.com>
3830 2016-10-03 Simon Marchi <simon.marchi@ericsson.com>
3833 * NEWS: Mention new frame field of =thread-selected event.
3834 * cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
3835 (add_com_suppress_notification): New function definition.
3836 (cmd_func): Set and restore the suppress_notification flag.
3837 * cli/cli-deicode.h (struct cmd_list_element)
3838 <suppress_notification>: New field.
3839 * cli/cli-interp.c (cli_suppress_notification): New global variable.
3840 (cli_on_user_selected_context_changed): New function.
3841 (_initialize_cli_interp): Attach to user_selected_context_changed
3843 * command.h (struct cli_suppress_notification): New structure.
3844 (cli_suppress_notification): New global variable declaration.
3845 (add_com_suppress_notification): New function declaration.
3846 * defs.h (enum user_selected_what_flag): New enum.
3847 (user_selected_what): New enum flag type.
3848 * frame.h (print_stack_frame_to_uiout): New function declaration.
3849 * gdbthread.h (print_selected_thread_frame): New function declaration.
3850 * inferior.c (print_selected_inferior): New function definition.
3851 (inferior_command): Remove printing of inferior/thread/frame switch
3852 notifications, notify user_selected_context_changed observer.
3853 * inferior.h (print_selected_inferior): New function declaration.
3854 * mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
3855 suppression to stack-select-frame and thread-select commands.
3856 * mi/mi-interp.c (struct mi_suppress_notification)
3857 <user_selected_context>: Initialize.
3858 (mi_user_selected_context_changed): New function definition.
3859 (_initialize_mi_interp): Attach to user_selected_context_changed.
3860 * mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
3861 (mi_execute_command): Handle notification suppression. Notify
3862 user_selected_context_changed observer on thread change instead of printing
3863 event directly. Don't send it if command already sends the notification.
3864 (command_notifies_uscc_observer): New function.
3865 (mi_cmd_execute): Don't handle notification suppression.
3866 * mi/mi-main.h (struct mi_suppress_notification)
3867 <user_selected_context>: New field.
3868 * stack.c (print_stack_frame_to_uiout): New function definition.
3869 (select_frame_command): Notify user_selected_context_changed
3871 (frame_command): Call print_selected_thread_frame if there's no frame
3872 change or notify user_selected_context_changed observer if there is.
3873 (up_command): Notify user_selected_context_changed observer.
3874 (down_command): Likewise.
3875 (_initialize_stack): Suppress user_selected_context notification for
3876 command select-frame.
3877 * thread.c (thread_command): Notify
3878 user_selected_context_changed if the thread has changed, print
3879 thread info directly if it hasn't.
3880 (do_captured_thread_select): Do not print thread switch event.
3881 (print_selected_thread_frame): New function definition.
3882 * tui/tui-interp.c (tui_on_user_selected_context_changed):
3883 New function definition.
3884 (_initialize_tui_interp): Attach to user_selected_context_changed
3887 2016-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
3889 PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression
3890 * exec.c (exec_file_locate_attach): Add parameter defer_bp_reset.
3892 * gdbcore.h (exec_file_locate_attach): Add parameter defer_bp_reset.
3893 * infcmd.c (setup_inferior): Update caller.
3894 * remote.c (remote_add_inferior): Likewise.
3896 2016-09-28 Pedro Alves <palves@redhat.com>
3898 * infcall.c (run_inferior_call): Remove input from the event
3899 loop while running the infcall.
3901 2016-09-27 Fredrik Hederstierna <fredrik.hederstierna@verisure.com>
3903 * arm-tdep.c (arm_m_addr_is_magic): New function.
3904 (arm_addr_bits_remove): Call arm_m_addr_is_magic.
3905 (arm_m_exception_unwind_sniffer): Likewise.
3907 2016-09-23 Jon Turney <jon.turney@dronecode.org.uk>
3909 * windows-nat.c (windows_delete_thread): Adjusting call to
3910 target_mourn_inferior to include ptid_t argument.
3912 2016-09-23 Tom Tromey <tom@tromey.com>
3914 * utils.h (make_cleanup_dyn_string_delete): Remove declaration.
3915 * utils.c: Don't include dyn-string.h.
3916 (do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
3917 * cli/cli-cmds.c: Include <string>. Don't include dyn-string.h.
3918 (argv_to_string): Rename. Change return type to std::string.
3919 (alias_command): Use std::string.
3921 2016-09-23 Tom Tromey <tom@tromey.com>
3923 * objfiles.c: Include <vector>.
3924 (objfile_relocate): Use std::vector.
3926 2016-09-23 Tom Tromey <tom@tromey.com>
3928 * rust-lang.c: Include <string> and <vector>.
3929 (rust_evaluate_funcall): Use std::vector, std::string.
3930 (rust_evaluate_subexp): Use std::string.
3931 (rust_lookup_symbol_nonlocal): Use std::string.
3933 2016-09-23 Tom Tromey <tom@tromey.com>
3935 * cp-namespace.c: Include <string>.
3936 (cp_search_static_and_baseclasses)
3937 (cp_lookup_symbol_imports_or_template, find_symbol_in_baseclass):
3940 2016-09-23 Tom Tromey <tom@tromey.com>
3942 * break-catch-sig.c: Include <string>.
3943 (signal_catchpoint_print_one): Use std::string.
3945 2016-09-23 Tom Tromey <tom@tromey.com>
3947 * utils.c (struct restore_ui_out_closure): Remove.
3948 * objfiles.h (terminate_minimal_symbol_table): Don't declare.
3950 2016-09-23 Yao Qi <yao.qi@linaro.org>
3952 * nat/linux-osdata.c (linux_xfer_osdata_threads): Replace
3953 sprintf with xsnprintf.
3954 (linux_xfer_osdata_fds): Likewise.
3956 2016-09-23 Pedro Alves <palves@redhat.com>
3958 * Makefile.in (SFILES): Add common/new-op.c.
3959 (COMMON_OBS): Add common/new-op.o.
3960 (new-op.o): New rule.
3961 * common/common-exceptions.h: Include <new>.
3962 (struct gdb_quit_bad_alloc): New type.
3963 * common/new-op.c: New file.
3965 2016-09-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3967 * rs6000-tdep.c (ppc_process_record_op31): Fix
3968 regcache_raw_read_unsigned call using the correct parameter type.
3970 2016-09-22 Anton Kolesov <anton.kolesov@synopsys.com>
3972 * arc-tdep.c: Fix ARI warning for printf(%p).
3974 2016-09-21 Anton Kolesov <anton.kolesov@synopsys.com>
3976 * MAINTAINERS (Write After Approval): Add Anton Kolesov.
3978 2016-09-21 Anton Kolesov <anton.kolesov@synopsys.com>
3980 * Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
3981 (HFILES_NO_SRCDIR): Add arc-tdep.h.
3982 (ALLDEPFILES): Add arc-tdep.c.
3983 * NEWS: Mention new ARC port.
3984 * configure.tgt: Add ARC.
3985 * arc-tdep.c: New file.
3986 * arc-tdep.h: New file.
3987 * features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
3988 * features/arc-v2.xml: New file.
3989 * features/arc-v2.c: New file (generated).
3990 * features/arc-arcompact.xml: New file.
3991 * features/arc-arcompact.c: New file (generated).
3993 2016-09-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3995 * rs6000-tdep.c (ppc_process_record_op63): Fix return of instruction
3998 2016-09-21 Tom Tromey <tom@tromey.com>
4001 * top.h (quit_force): Update.
4002 * top.c (quit_force): Changed type of first argument. Don't
4003 evaluate expression. Pass NULL to kill_or_detach.
4004 * cli/cli-cmds.c (quit_command): Evaluate "args".
4006 2016-09-21 Simon Marchi <simon.marchi@ericsson.com>
4008 * .gitignore: Ignore more files.
4009 * data-directory/.gitignore: Likewise.
4011 2016-09-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
4013 * rs6000-tdep.c (PPC_DQ): New macro.
4014 (ppc_process_record_op4): Add Power ISA 3.0 instructions.
4015 (ppc_process_record_op19): Likewise.
4016 (ppc_process_record_op31): Likewise.
4017 (ppc_process_record_op59): Likewise.
4018 (ppc_process_record_op60): Likewise.
4019 (ppc_process_record_op63): Likewise.
4020 (ppc_process_record): Likewise.
4021 (ppc_process_record_op61): New function.
4023 2016-09-21 Yao Qi <yao.qi@linaro.org>
4025 * aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
4028 2016-09-20 Tom Tromey <tom@tromey.com>
4030 * python/py-value.c (convert_value_from_python): Make PyInt_Check
4031 conditional on Python 2.
4032 * python/py-arch.c (archpy_disassemble): Make PyInt_Check
4033 conditional on Python 2.
4035 2016-09-20 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
4037 * rs6000-tdep.c (ppc_process_record_op31): Fix record of Store String
4040 2016-09-20 Sergio Durigan Junior <sergiodj@redhat.com>
4042 * fork-inferior.c (startup_inferior): Pass 'event_ptid' instead of
4043 'resume_ptid' to 'target_mourn_inferior'. Fix regression
4044 introduced by my last commit.
4046 2016-09-19 Pedro Alves <palves@redhat.com>
4048 * common/gdb_locale.h [!ENABLE_NLS] (gettext, dgettext, dcgettext,
4049 textdomain, bindtextdomain): Delete macros.
4050 * main.c (captured_main) [!ENABLE_NLS]: Skip bintextdomain and
4053 2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
4055 * darwin-nat.c (darwin_kill_inferior): Adjusting call to
4056 target_mourn_inferior to include ptid_t argument.
4057 * fork-child.c (startup_inferior): Likewise.
4058 * gnu-nat.c (gnu_kill_inferior): Likewise.
4059 * inf-ptrace.c (inf_ptrace_kill): Likewise.
4060 * infrun.c (handle_inferior_event_1): Likewise.
4061 * linux-nat.c (linux_nat_attach): Likewise.
4062 (linux_nat_kill): Likewise.
4063 * nto-procfs.c (interrupt_query): Likewise.
4064 (procfs_interrupt): Likewise.
4065 (procfs_kill_inferior): Likewise.
4066 * procfs.c (procfs_kill_inferior): Likewise.
4067 * record.c (record_mourn_inferior): Likewise.
4068 * remote-sim.c (gdbsim_kill): Likewise.
4069 * remote.c (remote_detach_1): Likewise.
4070 (remote_kill): Likewise.
4071 * target.c (target_mourn_inferior): Change declaration to accept
4072 new ptid_t argument; use gdb_assert on it.
4073 * target.h (target_mourn_inferior): Move function prototype from
4075 * target/target.h (target_mourn_inferior): ... to here. Adjust it
4076 to accept new ptid_t argument.
4077 * windows-nat.c (get_windows_debug_event): Adjusting call to
4078 target_mourn_inferior to include ptid_t argument.
4080 2016-09-18 Pedro Alves <palves@redhat.com>
4082 * s390-linux-nat.c: Include <algorithm>.
4084 2016-09-18 Pedro Alves <palves@redhat.com>
4086 * breakpoint.c (hardware_watchpoint_inserted_in_range): Explicitly
4087 specify the std:min/std::max specialization.
4088 * exec.c (section_table_read_available_memory): Likewise.
4089 * remote.c (remote_read_qxfer): Likewise.
4090 * target.c (simple_verify_memory): Likewise.
4092 2016-09-16 Simon Marchi <simark@simark.ca>
4094 * infrun.c (restore_current_uiout_cleanup): Move to ui-out.c.
4095 (print_stop_event): Use make_cleanup_restore_current_uiout.
4096 * python/python.c (execute_gdb_command): Likewise.
4097 * ui-out.c (restore_current_uiout_cleanup): Move from infrun.c.
4098 (make_cleanup_restore_current_uiout): New function definition.
4099 * ui-out.h (make_cleanup_restore_current_uiout): New function
4101 * utils.c (do_restore_ui_out): Remove.
4102 (make_cleanup_restore_ui_out): Remove.
4103 * utils.h (make_cleanup_restore_ui_out): Remove.
4105 2016-09-16 Pedro Alves <palves@redhat.com>
4107 * defs.h (min, max): Delete.
4108 * aarch64-tdep.c: Include <algorithm> and use std::min and
4109 std::max throughout.
4110 * aarch64-tdep.c: Likewise.
4111 * alpha-tdep.c: Likewise.
4112 * amd64-tdep.c: Likewise.
4113 * amd64-windows-tdep.c: Likewise.
4114 * arm-tdep.c: Likewise.
4115 * avr-tdep.c: Likewise.
4116 * breakpoint.c: Likewise.
4117 * btrace.c: Likewise.
4119 * disasm.c: Likewise.
4120 * doublest.c: Likewise.
4121 * dwarf2loc.c: Likewise.
4122 * dwarf2read.c: Likewise.
4123 * environ.c: Likewise.
4125 * f-exp.y: Likewise.
4126 * findcmd.c: Likewise.
4127 * ft32-tdep.c: Likewise.
4128 * gcore.c: Likewise.
4129 * hppa-tdep.c: Likewise.
4130 * i386-darwin-tdep.c: Likewise.
4131 * i386-tdep.c: Likewise.
4132 * linux-thread-db.c: Likewise.
4133 * lm32-tdep.c: Likewise.
4134 * m32r-tdep.c: Likewise.
4135 * m88k-tdep.c: Likewise.
4136 * memrange.c: Likewise.
4137 * minidebug.c: Likewise.
4138 * mips-tdep.c: Likewise.
4139 * moxie-tdep.c: Likewise.
4140 * nds32-tdep.c: Likewise.
4141 * nios2-tdep.c: Likewise.
4142 * nto-procfs.c: Likewise.
4143 * parse.c: Likewise.
4144 * ppc-sysv-tdep.c: Likewise.
4145 * probe.c: Likewise.
4146 * record-btrace.c: Likewise.
4147 * remote.c: Likewise.
4148 * rs6000-tdep.c: Likewise.
4149 * rx-tdep.c: Likewise.
4150 * s390-linux-nat.c: Likewise.
4151 * s390-linux-tdep.c: Likewise.
4152 * ser-tcp.c: Likewise.
4153 * sh-tdep.c: Likewise.
4154 * sh64-tdep.c: Likewise.
4155 * source.c: Likewise.
4156 * sparc-tdep.c: Likewise.
4157 * symfile.c: Likewise.
4158 * target-memory.c: Likewise.
4159 * target.c: Likewise.
4160 * tic6x-tdep.c: Likewise.
4161 * tilegx-tdep.c: Likewise.
4162 * tracefile-tfile.c: Likewise.
4163 * tracepoint.c: Likewise.
4164 * valprint.c: Likewise.
4165 * value.c: Likewise.
4166 * xtensa-tdep.c: Likewise.
4167 * cli/cli-cmds.c: Likewise.
4168 * compile/compile-object-load.c: Likewise.
4170 2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
4172 * s390-linux-nat.c (PER_BIT, PER_EVENT_BRANCH, PER_EVENT_IFETCH)
4173 (PER_EVENT_STORE, PER_EVENT_NULLIFICATION)
4174 (PER_CONTROL_BRANCH_ADDRESS, PER_CONTROL_SUSPENSION)
4175 (PER_CONTROL_ALTERATION): New macros.
4176 (struct s390_debug_reg_state) <break_areas>: New member.
4177 (s390_forget_process): Free break_areas as well.
4178 (s390_linux_new_fork): Copy break_areas as well.
4179 (s390_prepare_to_resume): Install hardware breakpoints.
4180 (s390_can_use_hw_breakpoint): Indicate support for hardware
4182 (s390_insert_hw_breakpoint, s390_remove_hw_breakpoint): New
4183 linux_nat target methods.
4184 (_initialize_s390_nat): Register them.
4186 2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
4188 * nat/linux-nat.h (lwp_is_stepping): New declaration.
4189 * linux-nat.c (lwp_is_stepping): New function.
4191 2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
4193 * s390-linux-nat.c (gdbcmd.h): New include.
4194 (s390_show_debug_regs): New function.
4195 (s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
4196 (s390_prepare_to_resume): Likewise.
4197 (_initialize_s390_nat): Register the command "maint set
4200 2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
4202 * s390-linux-nat.c (watch_areas): Remove variable. Replace by a
4204 (struct s390_debug_reg_state): ...this. New struct.
4205 (struct s390_process_info): New struct.
4206 (s390_process_list): New variable.
4207 (s390_find_process_pid, s390_add_process, s390_process_info_get)
4208 (s390_get_debug_reg_state): New functions.
4209 (s390_stopped_by_watchpoint): Now access the watch_areas VEC via
4210 s390_get_debug_reg_state.
4211 (s390_prepare_to_resume): Likewise.
4212 (s390_insert_watchpoint): Likewise.
4213 (s390_remove_watchpoint): Likewise.
4214 (s390_forget_process, s390_linux_new_fork): New linux_nat target
4216 (_initialize_s390_nat): Register them.
4218 2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
4220 * s390-linux-nat.c (s390_watch_area): New typedef. Define a VEC.
4221 (watch_base): Remove variable.
4222 (watch_areas): New variable.
4223 (s390_stopped_by_watchpoint): Transform operations on the
4224 watch_base list to equivalent operations on the watch_areas VEC.
4225 (s390_prepare_to_resume): Likewise.
4226 (s390_insert_watchpoint): Likewise.
4227 (s390_remove_watchpoint): Likewise.
4229 2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
4231 * s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
4232 functions instead of accessing lwp_info structure members.
4233 (s390_mark_per_info_changed): New function.
4234 (s390_new_thread): Use it.
4235 (s390_refresh_per_info_cb): New function.
4236 (s390_refresh_per_info): Remove parameter. Refresh all lwps of
4237 the current process.
4238 (s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
4239 (s390_remove_watchpoint): Likewise.
4241 2016-09-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
4243 * elfread.c (auxv.h): New include.
4244 (elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
4246 2016-09-08 Tom Tromey <tom@tromey.com>
4248 * remote.c (remote_notif_stop_ack, remote_wait_as)
4249 (show_remote_cmd): Remove unneeded casts.
4251 2016-09-06 Pedro Alves <palves@redhat.com>
4253 * top.c (wait_sync_command_done): Don't assume current_ui doesn't
4254 change across events. Restore the current UI before returning.
4255 (gdb_readline_wrapper): Restore the current UI before returning.
4257 2016-09-06 Pedro Alves <palves@redhat.com>
4259 * event-top.c (restore_ui_cleanup): Now static.
4260 (make_cleanup_restore_current_ui): New function.
4261 (switch_thru_all_uis_init): Use it.
4262 * infcall.c (call_thread_fsm_should_stop): Use it.
4263 * infrun.c (fetch_inferior_event): Use it.
4264 * top.c (new_ui_command): Use it.
4265 * top.h (restore_ui_cleanup): Delete declaration.
4266 (make_cleanup_restore_current_ui): New declaration.
4268 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4270 * i386-tdep.c (i386_floatformat_for_type): New function.
4271 (i386_gdbarch_init): Install it.
4272 * ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
4273 (ppc_linux_init_abi): Install it.
4275 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4277 * gdbarch.sh (floatformat_for_type): New gdbarch callback.
4278 * gdbarch.h, gdbarch.c: Re-generate.
4279 * arch-utils.h (default_floatformat_for_type): New prototype.
4280 * arch-utils.c (default_floatformat_for_type): New function.
4282 * doublest.c (floatformat_from_length): Remove.
4283 (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
4284 * gdbtypes.c (verify_floatformat): Require non-NULL format.
4286 * dwarf2read.c (dwarf2_init_float_type): New function.
4287 (read_base_type): Use it.
4288 * stabsread.c (dbx_init_float_type): New function.
4289 (read_sun_floating_type): Use it.
4290 (read_range_type): Likewise.
4292 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4294 * ada-lang.c (ada_language_arch_info): Use gdbarch-provided
4295 platform ABI floating-point formats for built-in types.
4296 * d-lang.c (build_d_types): Likewise.
4297 * f-lang.c (build_fortran_types): Likewise.
4298 * m2-lang.c (build_m2_types): Likewise.
4299 * mdebugread.c (basic_type): Likewise.
4301 * go-lang.c (build_go_types): Use IEEE floating-point formats
4302 for language built-in types as mandanted by the language.
4303 * jv-lang.c (build_java_types): Likewise.
4304 * rust-lang.c (rust_language_arch_info): Likewise.
4305 * stabsread.c (rs6000_builtin_type): Likewise.
4307 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4309 * gdbtypes.c (init_type): Remove "char" special case.
4310 (arch_integer_type): Likewise.
4311 (gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
4312 (objfile_type): Likewise.
4313 * mdebugread.c (basic_type): Likewise.
4314 * stabsread.c (rs6000_builtin_type): Likewise.
4316 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4318 * gdbtypes.h (enum type_flag_value): Remove.
4319 Remove references to TYPE_FLAG_... in comments throughout.
4320 * gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_...
4321 flags, print the corresponding TYPE_... access macro names.
4322 Remove references to TYPE_FLAG_... in comments throughout.
4323 * infcall.c: Remove references to TYPE_FLAG_... in comments.
4324 * valprint.c: Likewise.
4325 * gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
4326 values, only TYPE_INSTANCE_FLAG_... values.
4327 (class TypeFlagsPrinter): Likewise.
4329 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4331 * gdbtypes.h (init_type): Remove FLAGS argument. Move OBJFILE
4332 argument to first position.
4333 (init_integer_type): New prototype.
4334 (init_character_type): Likewise.
4335 (init_boolean_type): Likewise.
4336 (init_float_type): Likewise.
4337 (init_decfloat_type): Likewise.
4338 (init_complex_type): Likewise.
4339 (init_pointer_type): Likewise.
4340 * gdbtypes.c (verify_floatflormat): New function.
4341 (init_type): Remove FLAGS argument and processing. Move OBJFILE
4342 argument to first position.
4343 (init_integer_type): New function.
4344 (init_character_type): Likewise.
4345 (init_boolean_type): Likewise.
4346 (init_float_type): Likewise.
4347 (init_decfloat_type): Likewise.
4348 (init_complex_type): Likewise.
4349 (init_pointer_type): Likewise.
4350 (arch_float_type): Use verify_floatflormat.
4351 (objfile_type): Use init_..._type helpers instead of calling
4353 * dwarf2read.c (fixup_go_packaging): Update to changed init_type
4355 (read_namespace_type): Likewise.
4356 (read_module_type): Likewise.
4357 (read_typedef): Likewise.
4358 (read_unspecified_type): Likewise.
4359 (build_error_marker_type): Likewise.
4360 (read_base_type): Use init_..._type helpers.
4361 * mdebugread.c (basic_type): Use init_..._type helpers.
4362 (parse_type): Update to changed init_type prototype.
4363 (cross_ref): Likewise.
4364 * stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
4365 (read_sun_builtin_type): Likewise.
4366 (read_sun_floating_type): Likewise.
4367 (read_range_type): Likewise. Also update to changed init_type
4370 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4372 * gdbtypes.h (arch_decfloat_type): New prototype.
4373 (arch_pointer_type): Likewise.
4374 * gdbtypes.c (arch_decfloat_type): New function.
4375 (arch_pointer_type): Likewise.
4376 (gdbtypes_post_init): Use arch_decfloat_type.
4377 * avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
4378 * ft32-tdep.c (ft32_gdbarch_init): Likewise.
4379 * m32c-tdep.c (make_types): Likewise.
4380 * rl78-tdep.c (rl78_gdbarch_init): Likewise.
4382 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4384 * gdbtypes.c (set_type_code): New function.
4385 (init_type, arch_type): Use it.
4387 2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
4389 * ada-lang.c (ada_language_arch_info): Use gdbarch_long_double_bit
4390 instead of gdbarch_double_bit for "long_long_float".
4392 2016-09-05 Pedro Alves <palves@redhat.com>
4394 * NEWS: Mention that a C++ compiler is now required.
4395 * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
4396 (COMPILE.pre, CC_LD): Use CXX directly.
4397 (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
4398 * acinclude.m4: Don't include build-with-cxx.m4.
4399 * build-with-cxx.m4: Delete file.
4400 * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
4401 * warning.m4: Assume $enable_build_with_cxx is yes.
4402 * configure: Regenerate.
4404 2016-09-05 Pedro Alves <palves@redhat.com>
4407 * frame.c (get_frame_id): Compute the frame id if not computed
4409 (unwind_to_current_frame): Delete.
4410 (get_current_frame): Use get_prev_frame_always_1 to get the
4411 current frame and assert that that always succeeds.
4412 (get_prev_frame_if_no_cycle): Skip cycle detection if returning
4415 2016-09-02 Tom Tromey <tom@tromey.com>
4418 * dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address.
4419 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle
4420 DW_OP_form_tls_address.
4421 (locexpr_describe_location_piece): Likewise.
4422 * dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment.
4423 * dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address.
4424 (ctx_no_get_tls_address): Mention DW_OP_form_tls_address.
4425 * compile/compile-loc2c.c (struct insn_info): Update comment.
4426 (compute_stack_depth_worker): Handle DW_OP_form_tls_address.
4428 2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
4430 * target.c (target_wait): Mention that the function's prototype
4431 can be found at target/target.h.
4432 * target.h (target_wait): Move prototype from here...
4433 * target/target.h (target_wait): ... to here.
4435 2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
4437 * fork-child.c (startup_inferior): Replace calls to target_resume
4438 by target_continue{,_no_signal}, depending on the case.
4439 * linux-nat.c (cleanup_target_stop): Call
4440 target_continue_no_signal instead of target_resume.
4441 * procfs.c (procfs_wait): Likewise.
4442 * target.c (target_continue): New function.
4443 * target/target.h (target_continue): New prototype.
4445 2016-08-31 Yao Qi <yao.qi@linaro.org>
4447 * record-full.c (record_full_insert_breakpoint): Fix typo.
4449 2016-08-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
4451 * thread.c (tp_array_compar): Insert missing parentheses.
4453 2016-08-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
4455 * xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
4456 designated initializer list by plain initializer list, for C++
4459 2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
4461 * aarch64-linux-nat.c (ps_get_thread_area): Remove const from
4462 struct ps_prochandle.
4463 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
4464 * arm-linux-nat.c (ps_get_thread_area): Likewise.
4465 * gdb_proc_service.h (ps_get_thread_area): Likewise.
4466 * i386-linux-nat.c (ps_get_thread_area): Likewise.
4467 * m68klinux-nat.c (ps_get_thread_area): Likewise.
4468 * mips-linux-nat.c (ps_get_thread_area): Likewise.
4469 * nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
4470 * nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
4471 * xtensa-linux-nat.c (ps_get_thread_area): Likewise.
4473 2016-08-24 Simon Marchi <simon.marchi@ericsson.com>
4475 * infcmd.c (set_inferior_io_terminal): Set inferior terminal to
4476 NULL if terminal_name is an empty string.
4477 (_initialize_infcmd): Make the argument of "set inferior-tty"
4478 optional, mention it in the help doc.
4480 2016-08-24 Carl Love <cel@us.ibm.com>
4482 * rs6000-tdep.c (rs6000_gdbarch_init): Remove call
4483 set_gdbarch_deprecated_fp_regnum() architecture
4484 initialization function.
4486 2016-08-23 Simon Marchi <simon.marchi@ericsson.com>
4488 * stack.c (parse_frame_specification): Fix typo in comment.
4490 2016-08-23 Pedro Alves <palves@redhat.com>
4493 * inflow.c (our_terminal_info, initial_gdb_ttystate): Update
4495 (enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
4497 (set_initial_gdb_ttystate): Record our_terminal_info here too,
4499 (gdb_has_a_terminal): ... here. Reimplement in terms of
4500 initial_gdb_ttystate. Make static.
4501 * terminal.h (gdb_has_a_terminal): Delete declaration.
4502 (set_initial_gdb_ttystate): Add comment.
4503 * top.c (show_interactive_mode): Use input_interactive_p instead
4504 of gdb_has_a_terminal.
4506 2016-08-22 Pedro Alves <palves@redhat.com>
4509 * linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
4510 find the vDSO's start address with AT_SYSINFO_EHDR too, and
4511 determine the vDSO's size by finding the PT_LOAD segment that
4512 matches AT_SYSINFO_EHDR.
4514 2016-08-19 Yao Qi <yao.qi@linaro.org>
4516 * aarch64-tdep.c (aarch64_analyze_prologue): Handle register
4517 based STP instruction.
4519 2016-08-19 Yao Qi <yao.qi@linaro.org>
4521 * completer.c (linespec_location_completer): Make file_to_match
4524 2016-08-19 Pedro Alves <palves@redhat.com>
4526 * amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
4527 addresses over 0x7fffffff.
4529 2016-08-18 Carl Love <cel@us.ibm.com>
4531 * MAINTANERS Write After Approval): Add "Carl Love".
4533 2016-08-18 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
4535 * rs6000-tdep.c (ppc_process_record_op31): Handle HTM instructions.
4537 2016-08-17 Simon Marchi <simon.marchi@ericsson.com>
4539 * inferior.c (remove_inferior_command): Fix error message.
4541 2016-08-17 Simon Marchi <simon.marchi@ericsson.com>
4543 * inferior.c (exit_inferior_1): Remove comment.
4545 2016-08-15 Matthew Wahab <matthew.wahab@arm.com>
4548 * gdb_proc_service.h: Add an include of gregset.h
4549 [!HAVE_PROC_SERVICE_H]: Remove the include of gregset.h.
4551 2016-08-15 Yao Qi <yao.qi@linaro.org>
4553 * location.c (explicit_location_lex_one): Compare the return
4554 value of strncmp with zero. Don't check (*inp)[9]. Increment
4557 2016-08-11 Pedro Alves <palves@redhat.com>
4560 * nat/linux-ptrace.c: Include <sys/procfs.h> instead of
4563 2016-08-10 Pedro Alves <palves@redhat.com>
4566 * record-full.c (record_full_remove_breakpoint): Don't remove the
4567 breakpoint from the record_full_breakpoints VEC if we're detaching
4568 the breakpoint from a fork child.
4570 2016-08-10 Pedro Alves <palves@redhat.com>
4573 * break-catch-sig.c (signal_catchpoint_remove_location): Adjust
4575 * break-catch-syscall.c (remove_catch_syscall):
4576 * breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
4577 (remove_breakpoint_1): Pass 'reason' down.
4578 (remove_catch_fork, remove_catch_vfork, remove_catch_solib)
4579 (remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
4580 (base_breakpoint_remove_location, bkpt_remove_location)
4581 (bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
4583 * breakpoint.h (enum remove_bp_reason): Moved here from
4585 (struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
4586 * corelow.c (core_remove_breakpoint): New function.
4587 (init_core_ops): Install it as to_remove_breakpoint method.
4588 * exec.c (exec_remove_breakpoint): New function.
4589 (init_exec_ops): Install it as to_remove_breakpoint method.
4590 * mem-break.c (memory_remove_breakpoint): Adjust interface.
4591 * record-btrace.c (record_btrace_remove_breakpoint): Adjust
4593 * record-full.c (record_full_remove_breakpoint)
4594 (record_full_core_remove_breakpoint): Adjust interface.
4595 * remote.c (remote_remove_breakpoint): Adjust interface.
4596 * target-debug.h (target_debug_print_enum_remove_bp_reason): New
4598 * target-delegates.c: Regenerate.
4599 * target.c (target_remove_breakpoint): Add 'reason' parameter.
4600 * target.h (struct target_ops) <to_remove_breakpoint>: Add
4602 (target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
4605 2016-08-10 Pedro Alves <palves@redhat.com>
4608 * breakpoint.c (insertion_state_t): Delete.
4609 (enum remove_bp_reason): New.
4610 (detach_breakpoints, remove_breakpoint_1, remove_breakpoint):
4611 Adjust to use enum remove_bp_reason instead of insertion_state_t.
4613 2016-08-10 Pedro Alves <palves@redhat.com>
4616 * breakpoint.c (remove_breakpoint): Remove 'is' parameter and
4617 always pass mark_uninserted to remove_breakpoint_1.
4618 (insert_breakpoint_locations, remove_breakpoints)
4619 (remove_breakpoints_pid, update_global_location_list): Update
4622 2016-08-10 Руслан Ижбулатов <lrn1986@gmail.com>
4623 Pedro Alves <palves@redhat.com>
4625 * windows-nat.c (MS_VC_EXCEPTION): New define.
4626 (handle_exception_result): New enum.
4627 (windows_delete_thread): Free the thread's name.
4628 (handle_exception): Handle MS_VC_EXCEPTION.
4629 (get_windows_debug_event): Handle HANDLE_EXCEPTION_IGNORED.
4630 (windows_thread_name): New function.
4631 (windows_target): Install it as to_thread_name method.
4632 * NEWS: Mention the thread naming support on MS-Windows.
4634 2016-08-10 Pedro Alves <palves@redhat.com>
4636 * common/signals-state-save-restore.c
4637 (save_original_signals_state, restore_original_signals_state):
4638 Wrap perror_with_name arguments with '()'.
4640 2016-08-09 Pedro Alves <palves@redhat.com>
4643 * event-top.c (ui_register_input_event_handler)
4644 (ui_unregister_input_event_handler): New functions.
4645 (async_enable_stdin): Register input in the event loop.
4646 (async_disable_stdin): Unregister input from the event loop.
4647 (gdb_setup_readline): Register input in the event loop.
4648 * infrun.c (check_curr_ui_sync_execution_done): Register input in
4650 * target.c (target_terminal_inferior): Don't unregister input from
4652 (target_terminal_ours): Don't register input in the event loop.
4653 * target.h (target_terminal_inferior)
4654 (target_terminal_ours_for_output, target_terminal_ours): Update
4656 * top.h (ui_register_input_event_handler)
4657 (ui_unregister_input_event_handler): New declarations.
4658 * utils.c (ui_unregister_input_event_handler_cleanup)
4659 (prepare_to_handle_input): New functions.
4660 (defaulted_query, prompt_for_continue): Use
4661 prepare_to_handle_input.
4663 2016-08-09 Pedro Alves <palves@redhat.com>
4666 * mi/mi-main.c (mi_execute_command): Enable input and set prompt
4667 state to PROMPT_NEEDED.
4669 2016-08-09 Pedro Alves <palves@redhat.com>
4672 * Makefile.in (SFILES): Add
4673 common/signals-state-save-restore.c.
4674 (HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
4675 (COMMON_OBS): Add signals-state-save-restore.o.
4676 (signals-state-save-restore.o): New rule.
4677 * configure: Regenerate.
4678 * fork-child.c: Include "signals-state-save-restore.h".
4679 (fork_inferior): Call restore_original_signals_state.
4680 * main.c: Include "signals-state-save-restore.h".
4681 (captured_main): Call save_original_signals_state.
4682 * common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
4683 * common/signals-state-save-restore.c: New file.
4684 * common/signals-state-save-restore.h: New file.
4686 2016-08-09 Pedro Alves <palves@redhat.com>
4688 * value.c (unpack_value_bitfield): Skip unpacking if the parent
4689 has no contents buffer to begin with.
4691 2016-08-08 Pedro Alves <palves@redhat.com>
4693 * features/i386/amd64-avx-mpx-linux.c: Regenerate.
4694 * features/i386/amd64-avx-mpx.c: Regenerate.
4695 * features/i386/i386-avx-mpx-linux.c: Regenerate.
4696 * features/i386/i386-avx-mpx.c: Regenerate.
4698 2016-08-05 Simon Marchi <simon.marchi@ericsson.com>
4700 * event-top.h (cli_command_loop): Remove.
4702 2016-08-05 Pedro Alves <palves@redhat.com>
4705 * remote-fileio.c (remote_fileio_quit_handler): Check the quit
4706 flag before calling quit.
4708 2016-08-05 Pedro Alves <palves@redhat.com>
4710 * NEWS: Mention that GDB and GDBserver build with a C++ compiler
4713 2016-08-05 Pedro Alves <palves@redhat.com>
4715 * build-with-cxx.m4: Change help string to be in terms of
4716 --disable-build-with-cxx.
4717 * configure: Regenerate.
4719 2016-08-04 Yao Qi <yao.qi@linaro.org>
4721 * aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
4723 (aarch64_linux_read_description): Remove code on getting
4724 auxv and select target description on it. Select target
4725 description by the result of NT_ARM_VFP ptrace request.
4727 2016-08-03 Tom Tromey <tom@tromey.com>
4730 * python/py-frame.c (frapy_function): Use find_frame_funname.
4732 2016-08-03 Tom Tromey <tom@tromey.com>
4734 * stack.c (find_frame_funname): Avoid any possible leak in case
4735 cp_remove_params can throw.
4737 2016-08-03 Tom Tromey <tom@tromey.com>
4739 * NEWS: Mention new Python breakpoint events.
4741 2016-08-02 Tom Tromey <tom@tromey.com>
4743 * MAINTAINERS (Core): Add self as Rust maintainer.
4745 2016-08-01 Joel Brobecker <brobecker@adacore.com>
4747 * NEWS: Create a new section for the next release branch.
4748 Rename the section of the current branch, now that it has
4751 2016-08-01 Joel Brobecker <brobecker@adacore.com>
4753 GDB 7.12 branch created (41bfcd638a4e0e48b96ce4de2845372dea481322):
4754 * version.in: Bump version to 7.12.50.DATE-git.
4756 2016-07-27 Alan Modra <amodra@gmail.com>
4758 * amd64-darwin-tdep.c: Don't include libbfd.h.
4759 * i386-darwin-tdep.c: Likewise.
4760 * rs6000-nat.c: Likewise.
4761 * rs6000-tdep.c: Likewise.
4763 2016-07-26 Tom Tromey <tom@tromey.com>
4765 * symtab.c (register_symbol_computed_impl): Update.
4767 * value.h (symbol_read_needs): Declare.
4768 (symbol_read_needs_frame): Add comment.
4769 * symtab.h (struct symbol_computed_ops) <read_variable>: Update
4771 <get_symbol_read_needs>: Rename. Change return type.
4772 * findvar.c (symbol_read_needs): New function.
4773 (symbol_read_needs_frame): Rewrite.
4774 (default_read_var_value): Use symbol_read_needs.
4775 * dwarf2loc.c (struct symbol_needs_baton): Rename.
4776 <needs>: Renamed from needs_frame. Changed type.
4777 (needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
4778 (symbol_needs_read_mem, symbol_needs_frame_base)
4779 (symbol_needs_frame_cfa, symbol_needs_tls_address)
4780 (symbol_needs_dwarf_call): Rename.
4781 (needs_dwarf_reg_entry_value): Update.
4782 (symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
4784 (locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
4785 (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
4786 * defs.h (enum symbol_needs_kind): New.
4788 2016-07-26 Pedro Alves <palves@redhat.com>
4790 * nat/linux-ptrace.c: Include "gregset.h".
4791 (linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
4794 2016-07-26 Pedro Alves <palves@redhat.com>
4796 * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
4797 parameter to 'ptrace'.
4798 * nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
4799 (nat_uptr_t): New an unsigned long.
4800 (nat_clock_t): Remove attribute __aligned__.
4801 (struct nat_timeval): Delete.
4802 (nat_siginfo_t): Remove attribute __aligned__.
4803 (ptrace_siginfo_t): Define.
4804 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
4805 (compat_x32_siginfo_from_siginfo)
4806 (siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
4807 Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
4809 (amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
4810 'ptrace'. Remove static assertions.
4811 (top level): New static assertions.
4813 2016-07-25 Simon Marchi <simon.marchi@ericsson.com>
4815 * top.h (make_delete_ui_cleanup): New declaration.
4816 * top.c (delete_ui_cleanup): New function.
4817 (make_delete_ui_cleanup): New function.
4818 (new_ui_command): Create restore_ui cleanup earlier, create a
4819 delete_ui cleanup and discard it on success.
4821 2016-07-25 Pedro Alves <palves@redhat.com>
4822 Jan Kratochvil <jan.kratochvil@redhat.com>
4824 * nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
4827 2016-07-25 Pedro Alves <palves@redhat.com>
4829 * nat/linux-procfs.c (enum proc_state): New enum.
4830 (parse_proc_status_state): New function.
4831 (linux_proc_pid_get_state): Replace output string buffer parameter
4832 with an output proc_state parameter. Use parse_proc_status_state.
4833 (linux_proc_pid_is_gone): Adjust to use proc_state values.
4834 (linux_proc_pid_has_state): Change type of 'state' parameter; now
4835 an enum proc_state. Adjust to linux_proc_pid_get_state interface
4837 (linux_proc_pid_is_stopped)
4838 (linux_proc_pid_is_trace_stopped_nowarn)
4839 (linux_proc_pid_is_zombie_maybe_warn): Adjust to
4840 linux_proc_pid_get_state interface change.
4842 2016-07-25 Tim Wiederhake <tim.wiederhake@intel.com>
4844 * MAINTAINERS (Write After Approval): Add Tim Wiederhake
4846 2016-07-25 Tim Wiederhake <tim.wiederhake@intel.com>
4848 * NEWS: Resume btrace on reconnect.
4849 * record-btrace.c: Added record-btrace.h include.
4850 (record_btrace_open): Split into this and ...
4851 (record_btrace_push_target): ... this.
4852 (record_btrace_disconnect): New function.
4853 (init_record_btrace_ops): Use record_btrace_disconnect.
4854 * record-btrace.h: New file.
4855 * remote.c: Added record-btrace.h include.
4856 (remote_start_remote): Check recording status.
4857 (remote_btrace_maybe_reopen): New function.
4859 2016-07-23 Gabriel Krisman Bertazi <gabriel@krisman.be>
4861 * xml-syscall.c (get_syscalls_by_group): New.
4862 (get_syscall_group_names): New.
4863 (struct syscall_group_desc): New structure to store group data.
4864 (struct syscalls_info): Include field to store the group list.
4865 (sysinfo_free_syscall_group_desc): New.
4866 (free_syscalls_info): Free group list.
4867 (syscall_group_create_syscall_group_desc): New.
4868 (syscall_group_add_syscall): New.
4869 (syscall_create_syscall_desc): Add syscall to its groups.
4870 (syscall_start_syscall): Load group attribute.
4871 (syscall_group_get_group_by_name): New.
4872 (xml_list_syscalls_by_group): New.
4873 (xml_list_of_groups): New.
4874 * xml-syscall.h (get_syscalls_by_group): Export function
4875 to retrieve a list of syscalls filtered by the group name.
4876 (get_syscall_group_names): Export function to retrieve the list
4878 * break-catch-syscall.c (catch_syscall_split_args): Verify if
4879 argument is a syscall group and expand it to a list of syscalls
4880 when creating catchpoints.
4881 (catch_syscall_completer): Add word completion for system call
4883 * configure.ac: Include dependency for xsltproc when building
4885 * break-catch-syscall.c (_initialize_breakpoint): Update catch
4886 syscall command documentation.
4887 * NEWS: Include section about catching groups of syscalls.
4888 * configure: Regenerate.
4889 * data-directory/Makefile.in: Generate syscall xml when building
4891 * syscalls/gdb-syscalls.dtd: Include group attribute to the
4893 * syscalls/apply-defaults.xsl: New.
4894 * syscalls/linux-defaults.xml.in: New.
4895 * syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
4896 * syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
4897 * syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
4898 * syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
4899 * syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
4900 * syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
4901 * syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
4902 * syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
4903 * syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
4904 * syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
4905 * syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
4906 * syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
4907 * syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
4908 * syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
4909 * syscalls/aarch64-linux.xml: Regenerate.
4910 * syscalls/amd64-linux.xml: Regenerate.
4911 * syscalls/arm-linux.xml: Regenerate.
4912 * syscalls/i386-linux.xml: Regenerate.
4913 * syscalls/mips-n32-linux.xml: Regenerate.
4914 * syscalls/mips-n64-linux.xml: Regenerate.
4915 * syscalls/mips-o32-linux.xml: Regenerate.
4916 * syscalls/ppc-linux.xml: Regenerate.
4917 * syscalls/ppc64-linux.xml: Regenerate.
4918 * syscalls/s390-linux.xml: Regenerate.
4919 * syscalls/s390x-linux.xml: Regenerate.
4920 * syscalls/sparc-linux.xml: Regenerate.
4921 * syscalls/sparc64-linux.xml: Regenerate.
4923 2016-07-23 Andrew Pinski <apinski@cavium.com>
4925 * nat/aarch64-linux-hw-point.c
4926 (aarch64_linux_get_debug_reg_capacity): Handle
4927 ARMv8.1 and ARMv8.2 debug versions.
4928 * nat/aarch64-linux-hw-point.h
4929 (AARCH64_DEBUG_ARCH_V8_1): New define.
4930 (AARCH64_DEBUG_ARCH_V8_2): New define.
4932 2016-06-30 Руслан Ижбулатов <lrn1986@gmail.com>
4935 * windows-nat.c (signal_event_command): New command 'signal-event'
4936 for W32 JIT debug support.
4937 * NEWS: Add an entry about the new 'signal-event' command.
4939 2016-07-22 Tom Tromey <tom@tromey.com>
4942 * dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
4943 Call scan_partial_symbols for children when reading a Rust CU.
4944 (dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
4946 (process_structure_scope) <DW_TAG_subprogram>: Call
4947 read_func_scope for Rust.
4949 2016-07-22 Yao Qi <yao.qi@linaro.org>
4951 * ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
4954 2016-07-21 Tom Tromey <tom@tromey.com>
4956 * rust-lang.c (rust_tuple_struct_type_p): Return false for empty
4958 * rust-exp.y (struct_expr_list): Allow empty elements.
4960 2016-07-21 Tom Tromey <tom@tromey.com>
4962 * configure: Rebuild.
4963 * warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add
4964 -Wunused-but-set-parameter, -Wunused-but-set-variable.
4966 2016-07-21 Pedro Alves <palves@redhat.com>
4968 * go32-nat.c (go32_create_inferior): Add cast.
4969 * ser-go32.c (dos_noop): Delete.
4970 (dos_flush_output, dos_setparity, dos_drain_output): New
4972 (dos_write): Add cast.
4973 (dos_ops): Use dos_flush_output, dos_setparity and
4975 * top.c (do_chdir_cleanup): Add cast.
4977 2016-07-21 Pedro Alves <palves@redhat.com>
4979 * windows-nat.c (handle_exception): Remove "th".
4981 2016-07-21 Pedro Alves <palves@redhat.com>
4983 * varobj.c (varobj_value_get_print_value): Move "gdbarch" to block
4986 2016-07-20 John Baldwin <jhb@FreeBSD.org>
4988 * fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
4990 (fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
4992 (fbsd_add_vfork_done): Likewise.
4993 (fbsd_is_vfork_done_pending): Likewise.
4994 (fbsd_next_vfork_done): Likewise.
4995 (fbsd_resume): Only ignore pending vfork done events if
4996 "PTRACE_VFORK" is not defined.
4997 (fbsd_wait): Only look for pending vfork done events if
4998 "PTRACE_VFORK" is not defined.
4999 [PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
5001 (fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
5004 2016-07-20 John Baldwin <jhb@FreeBSD.org>
5006 * fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
5007 new child processes.
5009 2016-07-20 John Baldwin <jhb@FreeBSD.org>
5011 * fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
5012 (fbsd_enable_proc_events): New function.
5013 (fbsd_enable_follow_fork): Remove function.
5014 (fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
5015 (fbsd_post_attach): Likewise.
5017 2016-07-15 John Baldwin <jhb@FreeBSD.org>
5019 * common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
5020 (do_gdb_signal_to_host): Likewise.
5021 * infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
5023 * proc-events.c (signal_table): Add entry for SIGLIBRT.
5025 2016-07-14 Tom Tromey <tom@tromey.com>
5027 * python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
5030 2016-07-14 Tom Tromey <tom@tromey.com>
5032 * mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
5033 (mips_o32_push_dummy_call): Remove "stack_used_p".
5034 * aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
5036 * rust-lang.c (rust_print_type): Remove "len".
5037 * rust-exp.y (super_name): Remove "current_len".
5038 * python/py-framefilter.c (py_print_type): Remove "type".
5039 * mdebugread.c (parse_partial_symbols): Remove
5040 "past_first_source_file".
5041 <N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
5042 * m2-valprint.c (m2_print_unbounded_array): Remove
5044 (m2_val_print): Remove "i".
5045 * linespec.c (unexpected_linespec_error): Remove "cleanup".
5046 * f-valprint.c (f_val_print): Remove "i".
5047 * elfread.c (elf_symtab_read): Remove "offset".
5048 * dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
5049 * jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".
5051 2016-07-14 Tom Tromey <tom@tromey.com>
5053 * arch-utils.c (default_skip_permanent_breakpoint): Remove
5055 * disasm.c (do_assembly_only): Remove "num_displayed".
5056 * dwarf2read.c (read_abbrev_offset): Remove "length".
5057 (dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
5059 * m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
5060 * microblaze-tdep.c (microblaze_frame_cache): Remove "func".
5061 * tracefile.c (trace_save): Remove "status".
5063 2016-07-14 Tom Tromey <tom@tromey.com>
5065 * symfile.c (simple_overlay_update_1): Remove initialization
5066 of "size", and commented-out code.
5067 (simple_overlay_update): Likewise.
5069 2016-07-14 Tom Tromey <tom@tromey.com>
5071 * tui/tui-winsource.c (tui_show_source_line): Use getcurx.
5072 * tui/tui-io.c (tui_puts): Use getcurx.
5073 (tui_redisplay_readline): Likewise.
5075 2016-07-14 Tom Tromey <tom@tromey.com>
5077 * inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.
5079 2016-07-14 Tom Tromey <tom@tromey.com>
5081 * corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
5084 2016-07-13 Tom Tromey <tom@tromey.com>
5086 PR python/15620, PR python/18620:
5087 * python/py-evts.c (gdbpy_initialize_py_events): Call
5088 add_new_registry for new events.
5089 * python/py-events.h (events_object) <breakpoint_created,
5090 breakpoint_deleted, breakpoint_modified>: New fields.
5091 * python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
5092 breakpoint changed event.
5093 (gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
5094 (gdbpy_breakpoint_modified): New function.
5095 (gdbpy_initialize_breakpoints): Attach to the breakpoint modified
5098 2016-07-13 Tom Tromey <tom@tromey.com>
5102 * python/py-breakpoint.c (bppy_get_pending): New function.
5103 (breakpoint_object_getset): Add entry for "pending".
5104 * breakpoint.h (pending_breakpoint_p): Declare.
5105 * breakpoint.c (pending_breakpoint_p): New function.
5107 2016-07-13 Tom Tromey <tom@tromey.com>
5109 * python/py-breakpoint.c (bppy_get_visibility)
5110 (gdbpy_breakpoint_created): Use user_breakpoint_p.
5112 2016-07-13 Tom Tromey <tom@tromey.com>
5115 * jit.c (jit_reader_load_command): Use tilde_expand.
5116 (_initialize_jit): Fix help for jit-reader-unload. Set completer
5119 2016-07-12 Tom Tromey <tom@tromey.com>
5122 * python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
5123 gdb.invalidate_cached_frames.
5124 * python/lib/gdb/unwinder.py (register_unwinder): Call
5125 gdb.invalidate_cached_frames.
5126 * python/python.c (gdbpy_invalidate_cached_frames): New function.
5127 (python_GdbMethods): Add entry for invalidate_cached_frames.
5129 2016-07-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
5131 * cp-namespace.c (cp_lookup_bare_symbol): Initialize
5134 2016-07-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
5136 * cp-namespace.c (cp_lookup_bare_symbol): Use language passed as
5137 parameter to look for the symbol "this".
5140 2016-07-06 John Baldwin <jhb@FreeBSD.org>
5142 * h8300-tdep.c (h8300_print_register): Remove extraneous parentheses.
5144 2016-07-06 John Baldwin <jhb@FreeBSD.org>
5146 * ada-lang.c (ada_unpack_from_contents): Use unsigned constants with
5149 2016-07-06 John Baldwin <jhb@FreeBSD.org>
5151 * sh64-tdep.c (sh64_analyze_prologue): Set "uses_fp" when setting
5152 the MEDIA_FP_REGNUM register.
5154 2016-07-06 John Baldwin <jhb@FreeBSD.org>
5156 * score-tdep.c (score7_malloc_and_get_memblock): Remove check for
5159 2016-07-06 John Baldwin <jhb@FreeBSD.org>
5161 * fbsd-nat.c (fbsd_is_vfork_done_pending): Fix return type.
5163 2016-07-06 Yao Qi <yao.qi@linaro.org>
5165 * arm-tdep.c (arm_vfp_cprc_sub_candidate): Don't call
5166 arm_vfp_cprc_sub_candidate for static field.
5168 2016-07-06 Manish Goregaokar <manish@mozilla.com>
5170 * rust-lang.c (rust_subscript): Allow subscripting pointers.
5172 2016-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
5174 * configure: Regenerate.
5175 * configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.
5177 2016-07-01 Don Breazeal <donb@codesourcery.com>
5179 * remote.c (remote_get_memory_xfer_limit): New function.
5180 * target-delegates.c: Regenerate.
5181 * target.c (memory_xfer_partial): Call
5182 target_ops.to_get_memory_xfer_limit.
5183 * target.h (struct target_ops) <to_get_memory_xfer_limit>: New
5186 2016-07-01 John Baldwin <jhb@FreeBSD.org>
5188 * fbsd-nat.c (struct fbsd_fork_child_info): Rename to ...
5189 (struct fbsd_fork_info): ... this.
5190 (struct fbsd_fork_info) <child>: Rename to ...
5191 (struct fbsd_fork_info) <ptid>: ... this.
5192 (fbsd_pending_children): Update type.
5193 (fbsd_remember_child): Update type and field name.
5194 (fbsd_is_child_pending): Likewise.
5195 (fbsd_pending_vfork_done): New variable.
5196 (fbsd_is_vfork_done_pending): New function.
5197 (fbsd_next_vfork_done): New function.
5198 (fbsd_resume): Don't resume processes with a pending vfork done
5200 (fbsd_wait): Report pending vfork done events.
5201 (fbsd_follow_fork): Delay and record a pending vfork done event
5202 for a vfork parent when detaching the child.
5204 2016-07-01 John Baldwin <jhb@FreeBSD.org>
5206 * fbsd-nat.c (super_resume): Move earlier next to "super_wait".
5207 (resume_one_thread_cb): Move below fork following helper code.
5208 (resume_all_threads_cb): Likewise.
5209 (fbsd_resume): Likewise.
5211 2016-07-01 John Baldwin <jhb@FreeBSD.org>
5213 * fbsd-nat.c (fbsd_follow_fork): Only detach child if
5214 "detach_fork" is true.
5216 2016-07-01 John Baldwin <jhb@FreeBSD.org>
5218 * x86bsd-nat.c: Include 'gdbthread.h'.
5219 (x86bsd_dr_set): Set debug registers on all threads belonging to
5220 the current inferior.
5222 2016-07-01 John Baldwin <jhb@FreeBSD.org>
5224 * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
5226 * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
5228 (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
5229 (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
5230 with 'x86bsd_xsave_len'.
5231 (amd64bsd_store_inferior_registers): Likewise.
5232 (amd64bsd_target): Inherit from x86bsd_target.
5233 (amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
5234 (amd64bsd_dr_set): Likewise.
5235 (amd64bsd_dr_set_control): Likewise.
5236 (amd64bsd_dr_set_addr): Likewise.
5237 (amd64bsd_dr_get_addr): Likewise.
5238 (amd64bsd_dr_get_status): Likewise.
5239 (amd64bsd_dr_get_control): Likewise.
5240 * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
5242 (super_mourn_inferior): Move to x86bsd-nat.c.
5243 (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
5244 (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
5246 (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
5247 mourn_inferior' target op.
5248 * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
5249 * config/i386/fbsd64.mh: Likewise.
5250 * config/i386/nbsd64.mh: Likewise.
5251 * config/i386/nbsdelf.mh: Likewise.
5252 * config/i386/obsd.mh: Likewise.
5253 * config/i386/obsd64.mh: Likewise.
5254 * i386bsd-nat.c: Include 'x86bsd-nat.h'.
5255 (i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
5256 (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
5257 with 'x86bsd_xsave_len'.
5258 (i386bsd_store_inferior_registers): Likewise.
5259 (i386bsd_target): Inherit from x86bsd_target.
5260 (i386bsd_dr_get): Rename and move to x86bsd-nat.c.
5261 (i386bsd_dr_set): Likewise.
5262 (i386bsd_dr_set_control): Likewise.
5263 (i386bsd_dr_set_addr): Likewise.
5264 (i386bsd_dr_get_addr): Likewise.
5265 (i386bsd_dr_get_status): Likewise.
5266 (i386bsd_dr_get_control): Likewise.
5267 * i386bsd-nat.h (i386bsd_xsave_len): Remove.
5268 (i386bsd_dr_set_control): Remove.
5269 (i386bsd_dr_set_addr): Remove.
5270 (i386bsd_dr_get_addr): Remove.
5271 (i386bsd_dr_get_status): Remove.
5272 (i386bsd_dr_get_control): Remove.
5273 * i386fbsd-nat.c: Include 'x86bsd-nat.h'.
5274 (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
5276 (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
5277 mourn_inferior' target op.
5278 * x86bsd-nat.c: New file.
5279 * x86bsd-nat.h: New file.
5281 2016-07-01 Pedro Alves <palves@redhat.com>
5282 Tom Tromey <tom@tromey.com>
5284 * jit.c (jit_reader_load_command): Call reinit_frame_cache and
5285 jit_inferior_created_hook.
5286 (jit_reader_unload_command): Call reinit_frame_cache and
5287 jit_inferior_exit_hook.
5288 * jit.c (struct jit_unwind_private) <registers>: Delete field.
5289 <regcache>: New field.
5290 (jit_unwind_reg_set_impl): Set the register's value in the
5291 regcache. Free the passed-in gdb_reg_value.
5292 (jit_dealloc_cache): Adjust to free the regcache.
5293 (jit_frame_sniffer): Allocate a regcache instead of an array of
5294 gdb_reg_value pointers.
5295 (jit_frame_this_id): Adjust.
5296 (jit_frame_prev_register): Read raw registers off of the regcache
5297 instead of from the gdb_reg_value pointer array. Use
5298 gdbarch_pseudo_register_read_value to read pseudo registers.
5299 * regcache.c (regcache_raw_set_cached_value): New function,
5300 factored out from ...
5301 (regcache_raw_write): ... here.
5302 * regcache.h (regcache_raw_set_cached_value): Declare.
5304 2016-07-01 Pedro Alves <palves@redhat.com>
5305 Antoine Tremblay <antoine.tremblay@ericsson.com>
5307 * inf-ptrace.c (inf_ptrace_detach_success): New function, factored
5309 (inf_ptrace_detach): ... here.
5310 * inf-ptrace.h (inf_ptrace_detach_success): New declaration.
5311 * linux-nat.c (get_pending_status): Rename to ...
5312 (get_detach_signal): ... this, and return a host signal instead of
5313 filling in a wait status.
5314 (detach_one_lwp): New function, factored out from detach_callback
5315 and adjusted to handle detaching from a zombie thread.
5316 (detach_callback): Skip the leader thread.
5317 (linux_nat_detach): No longer defer to inf_ptrace_detach to detach
5318 the leader thread, nor build a signal string to pass down.
5319 Instead, use target_announce_detach, detach_one_lwp and
5320 inf_ptrace_detach_success.
5322 2016-07-01 Pedro Alves <palves@redhat.com>
5324 * breakpoint.c (breakpoint_init_inferior): Discard watchpoint
5326 * infcmd.c (detach_command): Call breakpoint_init_inferior.
5328 2016-07-01 Pedro Alves <palves@redhat.com>
5330 * darwin-nat.c (darwin_detach): Use target_announce_detach.
5331 * inf-ptrace.c (inf_ptrace_detach): Likewise.
5332 * nto-procfs.c (procfs_detach): Likewise.
5333 * remote.c (remote_detach_1): Likewise.
5334 * target.c (target_announce_detach): New function.
5335 * target.h (target_announce_detach): New declaration.
5337 2016-06-29 Tom Tromey <tom@tromey.com>
5340 * python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
5341 (SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
5344 2016-06-29 Tom Tromey <tom@tromey.com>
5347 * target.c (free_memory_read_result_vector): Take a pointer to the
5349 (read_memory_robust): Install a cleanup for "result".
5350 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
5352 2016-06-29 Manish Goregaokar <manish@mozilla.com>
5354 * rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.
5356 2016-06-29 Manish Goregaokar <manish@mozilla.com>
5358 * rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.
5360 2016-06-28 Yao Qi <yao.qi@linaro.org>
5362 * aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
5363 variable new_offset.
5365 2016-06-27 Manish Goregaokar <manish@mozilla.com>
5367 * rust-lang.c (rust_print_type, rust_decorations): Print unit
5369 (rust_print_type): Omit return type for functions returning unit.
5371 2016-06-25 Pierre-Marie de Rodat <derodat@adacore.com>
5373 * python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
5374 when there is an error during the breakpoint creation.
5376 2016-06-25 Tom Tromey <tom@tromey.com>
5378 * rust-lang.c (rust_get_disr_info, rust_print_type): Fix
5381 2016-06-25 Manish Goregaokar <manish@mozilla.com>
5384 * rust-lang.c (rust_get_disr_info): Correctly interpret
5385 NonZero-optimized enums of arbitrary depth.
5386 (rust_print_type): Correctly print NonZero-optimized
5389 2016-06-24 David Taylor <dtaylor@emc.com>
5391 PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
5392 * c-lang.h: Change all parameters, variables, and struct or union
5393 members used as struct or union fie3ld offsets from int to
5395 * c-valprint.c: Likewise.
5396 * cp-abi.c: Likewise.
5397 * cp-abi.h: Likewise.
5398 * cp-valprint.c: Likewise.
5399 * d-valprint.c: Likewise.
5400 * dwarf2loc.c: Likewise.
5402 * extension-priv.h: Likewise.
5403 * extension.c: Likewise.
5404 * extension.h: Likewise.
5405 * findvar.c: Likewise.
5406 * gdbtypes.h: Likewise.
5407 * gnu-v2-abi.c: Likewise.
5408 * gnu-v3-abi.c: Likewise.
5409 * go-valprint.c: Likewise.
5410 * guile/guile-internal.h: Likewise.
5411 * guile/scm-pretty-print.c: Likewise.
5412 * jv-valprint.c Likewise.
5413 * opencl-lang.c: Likewise.
5414 * p-lang.h: Likewise.
5415 * python/py-prettyprint.c: Likewise.
5416 * python/python-internal.h: Likewise.
5417 * spu-tdep.c: Likewise.
5418 * typeprint.c: Likewise.
5419 * valarith.c: Likewise.
5420 * valops.c: Likewise.
5421 * valprint.c: Likewise.
5422 * valprint.h: Likewise.
5423 * value.c: Likewise.
5424 * value.h: Likewise.
5425 * p-valprint.c: Likewise.
5426 * c-typeprint.c (c_type_print_base): When printing offset, use
5428 * gdbtypes.c (recursive_dump_type): Ditto.
5430 2016-06-24 David Taylor <david.taylor@emc.com>
5432 * MAINTAINERS (Write After Approval): Add David Taylor.
5434 2016-06-24 John Baldwin <jhb@FreeBSD.org>
5436 * configure.ac: Check for support for system call LWP fields on
5438 * config.in, configure: Rebuild.
5439 * data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
5440 * fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
5441 Report system call events.
5442 [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
5443 (fbsd_set_syscall_catchpoint): New function.
5444 (fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
5445 Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
5446 * fbsd-tdep.c: Include xml-syscall.h
5447 (fbsd_get_syscall_number): New function.
5448 (fbsd_init_abi): Set XML system call file name.
5449 Add "get_syscall_number" gdbarch method.
5450 * syscalls/freebsd.xml: New file.
5452 2016-06-24 John Baldwin <jhb@FreeBSD.org>
5454 * fbsd-tdep.c: Include "auxv.h".
5455 (fbsd_print_auxv_entry): New function.
5456 (fbsd_init_abi): Install gdbarch "print_auxv_entry" method.
5458 2016-06-24 John Baldwin <jhb@FreeBSD.org>
5460 * auxv.c (fprint_auxv_entry): New function.
5461 (default_print_auxv_entry): New function.
5462 (fprint_target_auxv): Use gdbarch_print_auxv_entry.
5463 * auxv.h (enum auxv_format): New enum.
5464 (fprint_auxv_entry): Declare.
5465 (default_print_auxv_entry): Declare.
5466 * gdbarch.sh (print_auxv_entry): New.
5467 * gdbarch.c, gdbarch.h: Re-generated.
5469 2016-06-24 John Baldwin <jhb@FreeBSD.org>
5471 * fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
5472 (fbsd_xfer_partial): New function.
5473 (fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
5474 "fbsd_xfer_partial".
5476 2016-06-23 Tom Tromey <tom@tromey.com>
5478 * symtab.c (symbol_find_demangled_name): Loop over languages and
5479 use language_sniff_from_mangled_name.
5480 * rust-lang.c (rust_sniff_from_mangled_name): New function.
5481 (rust_language_defn): Update.
5482 * p-lang.c (pascal_language_defn): Update.
5483 * opencl-lang.c (opencl_language_defn): Update.
5484 * objc-lang.c (objc_sniff_from_mangled_name): New function.
5485 (objc_language_defn): Update.
5486 * m2-lang.c (m2_language_defn): Update.
5487 * language.h (struct language_defn) <la_sniff_from_mangled_name>: New
5489 (language_sniff_from_mangled_name): Declare.
5490 * language.c (language_sniff_from_mangled_name): New function.
5491 (unknown_language_defn, auto_language_defn, local_language_defn):
5493 * jv-lang.c (java_sniff_from_mangled_name): New function.
5494 (java_language_defn): Use it.
5495 * go-lang.c (go_sniff_from_mangled_name): New function.
5496 (go_language_defn): Use it.
5497 * f-lang.c (f_language_defn): Update.
5498 * defs.h (enum language): Reorder.
5499 * d-lang.c (d_sniff_from_mangled_name): New function.
5500 (d_language_defn): Use it.
5501 * cp-support.h (gdb_sniff_from_mangled_name): Declare.
5502 * cp-support.c (gdb_sniff_from_mangled_name): New function.
5503 * c-lang.c (c_language_defn, cplus_language_defn)
5504 (asm_language_defn, minimal_language_defn): Update.
5505 * ada-lang.c (ada_sniff_from_mangled_name): New function.
5506 (ada_language_defn): Use it.
5508 2016-06-23 Tom Tromey <tom@tromey.com>
5510 * ada-lang.c (ada_extensions): New array.
5511 (ada_language_defn): Use it.
5512 * c-lang.c (c_extensions): New array.
5513 (c_language_defn): Use it.
5514 (cplus_extensions): New array.
5515 (cplus_language_defn): Use it.
5516 (asm_extensions): New array.
5517 (asm_language_defn): Use it.
5518 (minimal_language_defn): Update.
5519 * d-lang.c (d_extensions): New array.
5520 (d_language_defn): Use it.
5521 * f-lang.c (f_extensions): New array.
5522 (f_language_defn): Use it.
5523 * go-lang.c (go_language_defn): Update.
5524 * jv-lang.c (java_extensions): New array.
5525 (java_language_defn): Use it.
5526 * language.c (add_language): Call add_filename_language.
5527 (unknown_language_defn, auto_language_defn, local_language_defn):
5529 * language.h (struct language_defn) <la_filename_extensions>: New
5531 * m2-lang.c (m2_language_defn): Update.
5532 * objc-lang.c (objc_extensions): New array.
5533 (objc_language_defn): Use it.
5534 * opencl-lang.c (opencl_language_defn): Update.
5535 * p-lang.c (p_extensions): New array.
5536 (pascal_language_defn): Use it.
5537 * rust-lang.c (rust_extensions): New array.
5538 (rust_language_defn): Use it.
5539 * symfile.c (add_filename_language): No longer static. Make "ext"
5541 (init_filename_language_table): Remove.
5542 (_initialize_symfile): Update.
5543 * symfile.h (add_filename_language): Declare.
5545 2016-06-23 Tom Tromey <tom@tromey.com>
5547 * symfile.c (filename_language_table): Now a VEC.
5548 (fl_table_size, fl_table_next): Remove.
5549 (add_filename_language): Use VEC_safe_push.
5550 (set_ext_lang_command, info_ext_lang_command)
5551 (deduce_language_from_filename): Use VEC_iterate.
5552 (init_filename_language_table): Use VEC_empty.
5554 2016-06-23 Tom Tromey <tom@tromey.com>
5556 * python/python.c (gdbpy_parameter): Now static.
5557 * python/python-internal.h (gdbpy_parameter): Don't declare.
5559 2016-06-23 Tom Tromey <tom@tromey.com>
5562 * python/lib/gdb/command/frame_filters.py
5563 (InfoFrameFilter.list_frame_filters): Rename to print_list. Print
5564 nothing if no filters found. Return value indicating whether
5565 filters were printed.
5566 (InfoFrameFilter.print_list): Remove.
5567 (InfoFrameFilter.invoke): Print message if no frame filters
5570 2016-06-21 Walfred Tedeschi <walfred.tedeschi@intel.com>
5572 * f-valprint.c (f_val_print): Add field names for printing
5573 derived types fields.
5575 2016-06-21 Andreas Arnez <arnez@linux.vnet.ibm.com>
5577 * s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
5578 in name of last-break regset.
5580 2016-06-21 Pedro Alves <palves@redhat.com>
5582 * fork-child.c (fork_inferior): Switch the child to the main UI
5583 right after vfork. Save/restore the current UI in the parent.
5584 Flush outputs of the main UI instead of the current UI.
5586 2016-06-21 Pedro Alves <palves@redhat.com>
5588 * breakpoint.c (watchpoint_check): Send watchpoint-deleted output
5591 2016-06-21 Pedro Alves <palves@redhat.com>
5593 * NEWS: Mention support for running interpreters on separate
5594 UIs and the new new-ui command.
5596 2016-06-21 Pedro Alves <palves@redhat.com>
5598 * interps.c (set_top_level_interpreter): New function, factored
5599 out from captured_main.
5600 (interpreter_completer): Make extern.
5601 * interps.h (set_top_level_interpreter, interpreter_completer):
5603 (captured_main): Use set_top_level_interpreter.
5604 * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
5605 (open_terminal_stream, new_ui_command): New functions.
5606 (init_main): Install the "new-ui" command.
5608 2016-06-21 Pedro Alves <palves@redhat.com>
5610 * cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
5611 (read_command_lines): Use input_interactive_p instead of
5612 input_from_terminal_p.
5613 * defs.h (struct ui): Forward declare.
5614 (input_from_terminal_p): Rename to ...
5615 (input_interactive_p): ... this.
5616 * event-top.c (stdin_event_handler): Pass 0 as from_tty argument
5618 (command_handler): Adjust to per-UI stdin.
5619 (handle_line_of_input): Adjust to per-UI stdin and use
5620 input_interactive_p instead of ISATTY and input_from_terminal_p.
5621 (gdb_readline_no_editing_callback): Adjust to per-UI stdin.
5622 (command_line_handler): Always pass true as "from_tty" parameter
5623 of handle_line_of_input and execute_command.
5624 (async_sigterm_handler): Pass 0 as from_tty argument to
5626 * inflow.c (interactive_mode, show_interactive_mode): Moved to ...
5627 (gdb_has_a_terminal): Don't check interactive_mode here.
5628 (_initialize_inflow): Don't install "set interactive-mode" here.
5629 * main.c (captured_command_loop): Adjust to per-UI stdin.
5630 * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
5632 * top.c (new_ui): Save the stdin stream and whether it's a tty.
5633 (dont_repeat): Adjust to per-UI stdin.
5634 (command_line_input): Adjust to per-UI stdin and to use
5635 input_interactive_p.
5636 (quit_force): Write history if any UI supports interactive input.
5637 (interactive_mode, show_interactive_mode): Move here, from
5639 (input_from_terminal_p): Rename to ...
5640 (input_interactive_p): ... this, and check the "interactive_mode"
5641 global instead of calling gdb_has_a_terminal.
5642 (_initialize_top): Install "set interactive-mode" here.
5643 * top.h (struct ui) <stdin_stream, input_interactive_p>: New
5645 * utils.c (quit): Pass 0 as from_tty argument to quit_force.
5646 (defaulted_query): Adjust to per-UI stdin and to use
5647 input_interactive_p.
5649 2016-06-21 Pedro Alves <palves@redhat.com>
5651 * event-top.c (stdin_event_handler): Don't quit gdb if it was a
5652 secondary UI's input stream that closed. Instead, just delete the
5655 2016-06-21 Pedro Alves <palves@redhat.com>
5657 * event-top.c (main_ui_): Delete.
5658 (main_ui, current_ui, ui_list): No longer initialize here.
5659 * main.c (captured_main): UI initialization code factored out to
5660 new new_ui function.
5661 (gdb_main): Wrap captured_main with TRY/CATCH instead of
5663 * top.c (highest_ui_num): New global.
5664 (new_ui): New function.
5665 * top.h (struct ui) <num>: New field.
5666 (new_ui): New declaration.
5668 2016-06-21 Pedro Alves <palves@redhat.com>
5670 * cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
5671 nothing to print. Use should_print_stop_to_console.
5672 * tui/tui-interp.c (tui_on_normal_stop): Likewise.
5674 2016-06-21 Pedro Alves <palves@redhat.com>
5676 * breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
5677 (until_break_fsm_should_stop, until_break_fsm_clean_up): Add
5679 (until_break_command): Pass command interpreter to thread fsm
5681 * cli/cli-interp.c (should_print_stop_to_console): Adjust.
5682 * gdbthread.h (struct thread_control_state) <command_interp>:
5684 * infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
5686 (call_thread_fsm_should_stop): Add thread parameter.
5687 (call_function_by_hand_dummy): Pass command interpreter to thread
5688 fsm ctor. Pass thread pointer to fsm clean up method.
5689 * infcmd.c: Include interps.h.
5690 (struct step_command_fsm) <thread>: Delete field.
5691 (new_step_command_fsm): Add 'cmd_interp' parameter. Pass it down.
5692 (step_command_fsm_prepare): Remove references to fsm's thread
5694 (step_1): Pass command interpreter to thread
5695 fsm ctor. Pass thread pointer to fsm clean up method.
5696 (step_command_fsm_should_stop, step_command_fsm_clean_up): Add
5697 thread parameter and use it.
5698 (new_until_next_fsm): Add 'cmd_interp' parameter. Pass it down.
5699 (until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
5700 parameter and use it.
5701 (until_next_command): Pass command interpreter to thread fsm ctor.
5702 (struct finish_command_fsm) <thread>: Delete field.
5703 (finish_command_fsm_ops): Add NULL slot for should_notify_stop.
5704 (new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
5705 down. Remove thread parameter and adjust.
5706 (finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
5707 thread parameter and use it.
5708 (finish_command): Pass command interpreter to thread fsm ctor.
5710 * infrun.c (follow_fork): Move thread fsm to child fork instead of
5711 command interpreter, only.
5712 (clear_proceed_status_thread): Remove reference to command_interp.
5713 (proceed): Don't record the thread's command interpreter.
5714 (clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
5716 (fetch_inferior_event): Pass thread to fsm should_stop method.
5717 * thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
5719 (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
5720 parameter and pass it down.
5721 * thread-fsm.h (struct thread_fsm) <command_interp>: New field.
5722 (struct thread_fsm_ops) <clean_up, should_stop>: Add thread
5724 (thread_fsm_ctor): Add 'cmd_interp' parameter.
5725 (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
5727 * thread.c (thread_cancel_execution_command): Pass thread to
5728 thread fsm clean_up method.
5730 2016-06-21 Pedro Alves <palves@redhat.com>
5732 * cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
5733 (should_print_stop_to_console): New function, factored out from
5734 mi_on_normal_stop_1.
5735 * cli/cli-interp.h (should_print_stop_to_console): Declare.
5736 * mi/mi-interp.c (mi_on_normal_stop_1): Use
5737 should_print_stop_to_console. Pass it the current UI's console
5739 * mi/mi-main.c (captured_mi_execute_command): Use the
5740 INTERP_CONSOLE symbol rather than explicit "console".
5742 2016-06-21 Pedro Alves <palves@redhat.com>
5744 * infcmd.c (prepare_execution_command): Use
5745 all_uis_on_sync_execution_starting.
5746 * infrun.c (all_uis_on_sync_execution_starting): New function.
5747 * infrun.h (all_uis_on_sync_execution_starting): Declare.
5749 2016-06-21 Pedro Alves <palves@redhat.com>
5751 * annotate.c: Include top.h.
5752 (async_background_execution_p): Delete.
5753 (print_value_flags): Check the UI's prompt state rather then
5754 async_background_execution_p.
5755 * event-loop.c (start_event_loop): Set the prompt state to
5757 * event-top.c (display_gdb_prompt, async_enable_stdin)
5758 (async_disable_stdin): Check the current UI's prompt state instead
5759 of the sync_execution global.
5760 (command_line_handler): Set the prompt state to PROMPT_NEEDED
5761 before running a command, and display the prompt if still needed
5763 * infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
5764 (new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
5765 (call_thread_fsm_should_stop): Set the prompt state to
5767 (run_inferior_call): Adjust to temporarily set the prompt state to
5768 PROMPT_BLOCKED instead of using the sync_execution global.
5769 (call_function_by_hand_dummy): Pass the current UI to
5770 new_call_thread_fsm.
5771 * infcmd.c: Include top.h.
5772 (continue_1): Check the current UI's prompt state instead of the
5773 sync_execution global.
5774 (continue_command): Validate global execution state before calling
5775 prepare_execution_command.
5776 (step_1): Call all_uis_check_sync_execution_done.
5777 (attach_post_wait): Don't call async_enable_stdin here. Remove
5778 reference to sync_execution.
5779 * infrun.c (sync_execution): Delete global.
5780 (follow_fork_inferior)
5781 (reinstall_readline_callback_handler_cleanup): Check the current
5782 UI's prompt state instead of the sync_execution global.
5783 (check_curr_ui_sync_execution_done)
5784 (all_uis_check_sync_execution_done): New functions.
5785 (fetch_inferior_event): Call all_uis_check_sync_execution_done
5786 instead of trying to determine whether the global sync execution
5788 (handle_no_resumed): Check the prompt state of all UIs.
5789 (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
5790 UIs. Emit the "Switching to" notification to all UIs. Enable
5792 * infrun.h (sync_execution): Delete.
5793 (all_uis_check_sync_execution_done): Declare.
5794 * main.c (captured_command_loop): Don't call
5795 interp_pre_command_loop if the prompt is blocked.
5796 (catch_command_errors, catch_command_errors_const): Adjust.
5797 (captured_main): Set the initial prompt state to PROMPT_NEEDED.
5798 * mi/mi-interp.c (display_mi_prompt): Set the prompt state to
5800 (mi_interpreter_resume): Don't clear sync_execution. Remove hack
5802 (mi_execute_command_input_handler): Set the prompt state to
5803 PROMPT_NEEDED before executing the command, and only display the
5804 prompt if the prompt state is PROMPT_NEEDED afterwards.
5805 (mi_on_resume_1): Adjust to check the prompt state.
5806 * target.c (target_terminal_inferior): Adjust to check the prompt
5808 * top.c (wait_sync_command_done, maybe_wait_sync_command_done)
5809 (execute_command): Check the current UI's prompt state instead of
5811 * top.h (enum prompt_state): New.
5812 (struct ui) <prompt_state>: New field.
5813 (ALL_UIS): New macro.
5815 2016-06-21 Pedro Alves <palves@redhat.com>
5817 * top.c (gdb_secondary_prompt_depth): Delete.
5818 (gdb_in_secondary_prompt_p): Add ui parameter. Use it.
5819 (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
5820 per-UI gdb_secondary_prompt_depth.
5821 * top.h (struct ui) <secondary_prompt_depth>: New field.
5823 2016-06-21 Pedro Alves <palves@redhat.com>
5825 * cli/cli-interp.c (cli_interpreter_pre_command_loop): New
5827 (cli_interp_procs): Install it instead of cli_command_loop.
5828 * cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
5829 * event-top.c (cli_command_loop): Delete.
5830 * interps.c (interp_new): Remove reference to command_loop_proc.
5831 (current_interp_command_loop): Delete.
5832 (interp_pre_command_loop): New function.
5833 (interp_command_loop_ftype): Delete.
5834 * interps.h (interp_pre_command_loop_ftype): New typedef.
5835 (struct interp_procs) <command_loop_proc>: Delele field.
5836 <pre_command_loop_proc>: New field.
5837 (current_interp_command_loop): Delete declaration.
5838 (interp_pre_command_loop): New declaration.
5839 * main.c (captured_command_loop): Call interp_pre_command_loop
5840 instead of current_interp_command_loop and start an event loop.
5841 * mi/mi-interp.c (mi_command_loop): Delete.
5842 (mi_interpreter_pre_command_loop): New.
5843 (mi_interp_procs): Update.
5844 * tui/tui-interp.c (tui_interp_procs): Install
5845 cli_interpreter_pre_command_loop instead of cli_command_loop.
5847 2016-06-21 Pedro Alves <palves@redhat.com>
5849 * interps.c (current_interpreter): New function.
5850 * interps.h (current_interpreter): New declaration.
5851 * mi/mi-cmds.h (raw_stdout): Delete declaration.
5852 * mi/mi-common.h (struct mi_interp) <raw_stdout,
5853 saved_raw_stdout>: New field.
5854 * mi/mi-interp.c (display_mi_prompt): New parameter 'mi'. Adjust
5855 to per-UI raw_stdout.
5856 (mi_interpreter_init): Adjust to per-UI raw_stdout.
5857 (mi_on_sync_execution_done, mi_execute_command_input_handler)
5858 (mi_command_loop): Pass MI instance to display_mi_prompt.
5859 (mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
5860 (mi_on_resume): Adjust to per-UI raw_stdout.
5861 (saved_raw_stdout): Delete.
5862 (mi_set_logging): Adjust to per-UI raw_stdout and
5864 * mi/mi-main.c (raw_stdout): Delete.
5865 (mi_cmd_gdb_exit, captured_mi_execute_command)
5866 (mi_print_exception, mi_load_progress): Adjust to per-UI
5868 (print_diff_now, mi_print_timing_maybe): New ui_file parameter.
5870 (print_diff): New ui_file parameter. Send output there instead of
5872 * mi/mi-main.h (struct ui_file): Forward declare.
5873 (mi_print_timing_maybe): Add ui_file parameter.
5875 2016-06-21 Pedro Alves <palves@redhat.com>
5877 * mi/mi-interp.c (display_mi_prompt): New function.
5879 2016-06-21 Pedro Alves <palves@redhat.com>
5881 * target.c (target_terminal_inferior): Bail out after
5882 unregistering input_fd if not on the main UI.
5883 (target_terminal_ours): Bail out after registering input_fd if not
5885 (target_terminal_ours_for_output): Bail out if not on the main UI.
5887 2016-06-21 Pedro Alves <palves@redhat.com>
5889 * event-top.c (restore_ui_cleanup): Make extern.
5890 * infrun.c (fetch_inferior_event): Always switch to the main UI.
5891 * top.h (restore_ui_cleanup): Declare.
5893 2016-06-21 Pedro Alves <palves@redhat.com>
5896 * cli/cli-interp.c: Include cli-interp.h and event-top.h.
5897 (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the
5898 UI's input_handler here.
5899 (cli_interpreter_supports_command_editing): New function.
5900 (cli_interp_procs): Install it.
5901 * cli/cli-interp.h: New file.
5902 * event-top.c (async_command_editing_p): Rename to ...
5903 (set_editing_cmd_var): ... this.
5904 (change_line_handler): Add parameter 'editing', and use it. Bail
5905 early if the interpreter doesn't support editing. Don't touch
5906 readline state if editing is off.
5907 (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
5908 (gdb_rl_callback_handler_reinstall): Assert the current UI is the
5910 (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
5911 not using readline. Check whether the current UI is using command
5912 editing instead of checking the async_command_editing_p global.
5913 (set_async_editing_command): Delete.
5914 (gdb_setup_readline): Add 'editing' parameter. Only allow editing
5915 on the main UI. Don't touch readline state if editing is off.
5916 (gdb_disable_readline): Don't touch readline state if editing is
5918 * event-top.h (gdb_setup_readline): Add 'int' parameter.
5919 (set_async_editing_command): Delete declaration.
5920 (change_line_handler, command_line_handler): Declare.
5921 (async_command_editing_p): Rename to ...
5922 (set_editing_cmd_var): ... this.
5923 * infrun.c (reinstall_readline_callback_handler_cleanup): Check
5924 whether the current UI has editing enabled rather than checking
5925 the async_command_editing_p global.
5926 * interps.c (interp_supports_command_editing): New function.
5927 * interps.h (interp_supports_command_editing_ftype): New typedef.
5928 (struct interp_procs) <supports_command_editing_proc>: New field.
5929 (interp_supports_command_editing): Declare.
5930 * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
5931 gdb_setup_readline. Don't clear the async_command_editing_p
5932 global. Update comments.
5933 * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
5934 whether the current UI has editing enabled rather than checking
5935 the async_command_editing_p global. Don't touch readline state if
5937 (undo_terminal_modifications_before_exit): Switch to the main UI.
5938 Unconditionally call gdb_disable_readline.
5939 (set_editing): New function.
5940 (show_async_command_editing_p): Rename to ...
5941 (show_editing): ... this. Show the state of the current UI.
5942 (_initialize_top): Adjust.
5943 * top.h (struct ui) <command_editing>: New field.
5944 * tui/tui-interp.c: Include cli/cli-interp.h.
5945 (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's
5947 (tui_interp_procs): Install
5948 cli_interpreter_supports_command_editing.
5949 * tui/tui-io.c (tui_getc): Check whether the current UI has
5950 editing enabled rather than checking the async_command_editing_p
5953 2016-06-21 Pedro Alves <palves@redhat.com>
5955 * top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
5956 * top.h (struct ui) <m_current_uiout>: New field.
5957 * ui-out.c (current_uiout): Delete.
5958 * ui-out.h (current_uiout): Delete.
5959 (current_ui_current_uiout_ptr): New declaration.
5960 (current_uiout): Reimplement as wrapper around
5961 current_ui_current_uiout_ptr.
5963 2016-06-21 Pedro Alves <palves@redhat.com>
5965 * ui-out.c (default_ui_out_impl): Delete.
5966 (def_uiout): Delete.
5967 (current_uiout): Set to NULL.
5968 (default_table_begin, default_table_body, default_table_end)
5969 (default_table_header, default_begin, default_end)
5970 (default_field_int, default_field_skip, default_field_string)
5971 (default_field_fmt, default_spaces, default_text, default_message)
5972 (default_wrap_hint, default_flush, default_data_destroy): Delete.
5974 2016-06-21 Pedro Alves <palves@redhat.com>
5976 * event-top.c (gdb_setup_readline): Pass the UI's outstream and
5977 errstream to stdout_fileopen and stderr_fileopen.
5978 * exceptions.c: Include top.h.
5979 (print_flush): Open the current UI's outstream file descriptor,
5980 instead of hardcoding file descriptor 1.
5981 * main.c (captured_main): Save the main UI's out and error
5982 streams. Adjust stderr_fileopen call.
5983 * top.h (struct ui) <outstream, errstream>: New fields.
5984 * ui-file.c (stderr_fileopen): Add stream parameter. Use it
5986 * ui-file.h (stderr_fileopen): Add stream parameter and update
5989 2016-06-21 Pedro Alves <palves@redhat.com>
5991 * event-top.c (input_fd): Delete.
5992 (stdin_event_handler): Switch to the UI whose input descriptor got
5993 the event. Adjust to per-UI input_fd.
5994 (gdb_setup_readline): Don't set the input_fd global. Adjust to
5996 (gdb_disable_readline): Adjust to per-UI input_fd.
5997 * event-top.h (input_fd): Delete declaration.
5998 * linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
5999 from the event-loop here.
6000 (linux_nat_terminal_ours): Don't register input_fd in the
6002 * main.c (captured_main): Adjust to per-UI input_fd.
6003 * remote.c (remote_terminal_inferior): Don't remove input_fd from
6004 the event-loop here.
6005 (remote_terminal_ours): Don't register input_fd in the event-loop
6007 * target.c: Include top.h and event-top.h.
6008 (target_terminal_inferior): Remove input_fd from the event-loop
6010 (target_terminal_ours): Register input_fd in the event-loop.
6011 * top.h (struct ui) <input_fd>: New field.
6013 2016-06-21 Pedro Alves <palves@redhat.com>
6015 * cli/cli-script.c (execute_user_command, read_next_line)
6016 (read_next_line): Adjust to per-UI instream.
6017 * event-top.c (stdin_event_handler, command_handler)
6018 (handle_line_of_input, command_line_handler)
6019 (gdb_readline_no_editing_callback, async_sigterm_handler)
6020 (gdb_setup_readline): Likewise.
6021 * inflow.c: Include top.h.
6022 (gdb_has_a_terminal, child_terminal_init_with_pgrp)
6023 (gdb_save_tty_state, child_terminal_inferior)
6024 (child_terminal_ours_1, copy_terminal_info): Use the main UI.
6025 (initialize_stdin_serial): Adjust to per-UI instream.
6026 * main.c (captured_command_loop, captured_main): Adjust to per-UI
6028 * mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
6029 * python/python.c (python_interactive_command): Likewise.
6030 * terminal.h (struct ui): Forward declare.
6031 (initialize_stdin_serial): Add struct ui parameter.
6032 * top.c (instream): Delete.
6033 (do_restore_instream_cleanup, read_command_file, dont_repeat)
6034 (gdb_readline_no_editing, command_line_input)
6035 (input_from_terminal_p, gdb_init): Adjust to per-UI instream.
6036 * top.h (struct ui) <instream>: New field.
6037 (instream): Delete declaration.
6038 (quit): Adjust to per-UI instream.
6040 2016-06-21 Pedro Alves <palves@redhat.com>
6042 * event-loop.c: Include top.h.
6043 (invoke_async_signal_handlers): Switch to the main UI.
6044 * event-top.c (main_ui_): Update comment.
6045 (main_ui): New global.
6046 * top.h (main_ui): Declare.
6048 2016-06-21 Pedro Alves <palves@redhat.com>
6050 * cli/cli-interp.c (cli_interp): Delete.
6051 (as_cli_interp): New function.
6052 (cli_on_normal_stop, cli_on_signal_received)
6053 (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
6054 (cli_on_no_history): Send output to all CLI UIs.
6055 (cli_on_sync_execution_done, cli_on_command_error): Skip output if
6056 the top level interpreter is not a CLI.
6057 (cli_interpreter_init): Don't set cli_interp or install observers
6059 (_initialize_cli_interp): Install observers here.
6060 * event-top.c (main_ui_, ui_list): New globals.
6061 (current_ui): Point to main_ui_.
6062 (restore_ui_cleanup, switch_thru_all_uis_init)
6063 (switch_thru_all_uis_cond, switch_thru_all_uis_next): New
6065 * mi/mi-interp.c (as_mi_interp): New function.
6066 (mi_interpreter_init): Don't install observers here.
6067 (mi_on_sync_execution_done): Skip output if the top level
6068 interpreter is not a MI.
6069 (mi_new_thread, mi_thread_exit, mi_record_changed)
6070 (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
6071 (mi_inferior_removed): Send output to all MI UIs.
6072 (find_mi_interpreter, mi_interp_data): Delete.
6073 (find_mi_interp): New function.
6074 (mi_on_signal_received, mi_on_end_stepping_range)
6075 (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
6077 (mi_on_normal_stop): Rename to ...
6078 (mi_on_normal_stop_1): ... this.
6079 (mi_on_normal_stop): Reimplement, sending output to all MI UIs.
6080 (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
6081 (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
6082 (mi_breakpoint_modified, mi_output_running_pid): Send output to
6084 (mi_on_resume): Rename to ...
6085 (mi_on_resume_1): ... this. Don't handle infcalls here.
6086 (mi_on_resume): Reimplement, sending output to all MI UIs.
6087 (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
6088 (mi_memory_changed): Send output to all MI UIs.
6089 (report_initial_inferior): Install observers here.
6090 * top.h (struct ui) <next>: New field.
6092 (struct switch_thru_all_uis): New.
6093 (switch_thru_all_uis_init, switch_thru_all_uis_cond)
6094 (switch_thru_all_uis_next): Declare.
6095 (SWITCH_THRU_ALL_UIS): New macro.
6096 * tui/tui-interp.c (tui_interp): Delete global.
6097 (as_tui_interp): New function.
6098 (tui_on_normal_stop, tui_on_signal_received)
6099 (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
6100 (tui_on_no_history): Send output to all TUI UIs.
6101 (tui_on_sync_execution_done, tui_on_command_error): Skip output if
6102 the top level interpreter is not a TUI.
6103 (tui_init): Don't set tui_interp or install observers here.
6104 (_initialize_tui_interp): Install observers here.
6106 2016-06-21 Pedro Alves <palves@redhat.com>
6108 * cli/cli-interp.c (cli_uiout): Delete, moved into ...
6109 (struct cli_interp): ... this new structure.
6110 (cli_on_normal_stop, cli_on_signal_received)
6111 (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
6112 (cli_on_no_history): Use interp_ui_out.
6113 (cli_interpreter_init): If top level, set the cli_interp global.
6114 (cli_interpreter_init): Return the interp's data instead of NULL.
6115 (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
6116 to cli_uiout being in the interpreter's data.
6117 (cli_interp_procs): New, factored out from _initialize_cli_interp.
6118 (cli_interp_factory): New function.
6119 (_initialize_cli_interp): Call interp_factory_register.
6120 * interps.c (get_interp_info): New, factored out from ...
6121 (get_current_interp_info): ... this.
6122 (interp_new): Add parameter 'data'. Store it.
6123 (struct interp_factory): New function.
6124 (interp_factory_p): New typedef. Define a VEC_P.
6125 (interpreter_factories): New global.
6126 (interp_factory_register): New function.
6127 (interp_add): Add 'ui' parameter. Use get_interp_info and
6128 interp_lookup_existing.
6129 (interp_lookup): Rename to ...
6130 (interp_lookup_existing): ... this. Add 'ui' parameter. Don't
6131 check for NULL or empty name here.
6132 (interp_lookup): Add 'ui' parameter and reimplement.
6133 (interp_set_temp, interpreter_exec_cmd): Adjust.
6134 (interpreter_completer): Complete on registered interpreter
6135 factories instead of interpreters.
6136 * interps.h (interp_factory_func): New typedef.
6137 (interp_factory_register): Declare.
6138 (interp_new, interp_add): Adjust.
6139 (interp_lookup): Declare.
6140 * main.c (captured_main): Adjust.
6141 * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
6142 (mi_interp_procs): New, factored out from
6143 _initialize_mi_interp.
6144 (mi_interp_factory): New function.
6145 * python/python.c (execute_gdb_command): Adjust.
6146 * tui/tui-interp.c (tui_init): If top level, set the tui_interp
6148 (tui_interp_procs): New.
6149 (tui_interp_factory): New function.
6150 (_initialize_tui_interp): Call interp_factory_register.
6152 2016-06-21 Pedro Alves <palves@redhat.com>
6154 * breakpoint.c (bpstat_do_actions_1): Access the current UI's
6155 async field instead of the interpreter_async global.
6156 * cli/cli-script.c (execute_user_command, while_command)
6157 (if_command, script_from_file): Likewise.
6158 * compile/compile.c: Include top.h instead of interps.h.
6159 (compile_file_command, compile_code_command)
6160 (compile_print_command): Access the current UI's async field
6161 instead of the interpreter_async global.
6162 * guile/guile.c: Include top.h instead of interps.h.
6163 (guile_repl_command, guile_command, gdbscm_execute_gdb_command):
6164 Access the current UI's async field instead of the
6165 interpreter_async global.
6166 * guile/scm-ports.c: Include top.h instead of interps.h.
6167 (ioscm_with_output_to_port_worker): Access the current UI's async
6168 field instead of the interpreter_async global.
6169 * inf-loop.c (inferior_event_handler): Likewise.
6170 * infcall.c (run_inferior_call): Likewise.
6171 * infrun.c (reinstall_readline_callback_handler_cleanup)
6172 (fetch_inferior_event): Likewise.
6173 * interps.c (interpreter_async): Delete.
6174 (struct ui_interp_info): New.
6175 (get_current_interp_info): New function.
6176 (interp_list, current_interpreter, top_level_interpreter_ptr):
6178 (interp_add, interp_set, interp_lookup, interp_ui_out)
6179 (current_interp_set_logging, interp_set_temp)
6180 (current_interp_named_p): Adjust to per-UI interpreters.
6181 (command_interpreter): Delete.
6182 (command_interp, current_interp_command_loop, interp_quiet_p)
6183 (interp_exec, interpreter_exec_cmd, interpreter_completer)
6184 (top_level_interpreter, top_level_interpreter_data): Adjust to
6185 per-UI interpreters.
6186 * interps.h (interpreter_async): Delete.
6187 * main.c (captured_command_loop): Access the current UI's async
6188 field instead of the interpreter_async global.
6189 * python/python.c (python_interactive_command, python_command)
6190 (execute_gdb_command): Likewise.
6191 * top.c (maybe_wait_sync_command_done, execute_command_to_string):
6192 Access the current UI's async field instead of the
6193 interpreter_async global.
6194 * top.h (struct tl_interp_info): Forward declare.
6195 (struct ui) <interp_info, async>: New fields.
6197 2016-06-21 Pedro Alves <palves@redhat.com>
6199 * main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
6201 (gen_ret_current_ui_field_ptr): New macro. Use it to generate
6202 wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
6203 * top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
6204 m_gdb_stdlog>: New fields.
6205 (current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
6206 (current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
6207 (gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
6210 2016-06-21 Pedro Alves <palves@redhat.com>
6212 * event-top.c: Update readline-related comments.
6213 (input_handler, call_readline): Delete globals.
6214 (gdb_rl_callback_handler): Call the current UI's input_handler
6216 (change_line_handler): Adjust to set current UI's properties
6218 (current_ui_, current_ui): New globals.
6219 (get_command_line_buffer): Rewrite to refer to the current UI.
6220 (stdin_event_handler): Adjust to call the call_readline method of
6222 (gdb_readline_no_editing_callback): Adjust to call the current UI's
6223 input_handler method.
6224 (gdb_setup_readline): Adjust to set current UI's properties
6226 * event-top.h (call_readline, input_handler): Delete declarations.
6227 * mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
6228 UI's properties instead of globals.
6229 * top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
6230 properties instead of globals.
6231 (gdb_readline_wrapper): Adjust to call and set current UI's
6232 methods instead of globals.
6233 * top.h: Include buffer.h and event-loop.h.
6234 (struct ui): New struct.
6235 (current_ui): New declaration.
6237 2016-06-21 Pedro Alves <palves@redhat.com>
6239 * ada-lang.c (ada_exception_name_addr_1): Add comment.
6240 (print_it_exception): Select the current frame.
6242 2016-06-17 Yan-Ting Lin <currygt52@gmail.com>
6244 * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o.
6245 (HFILES_NO_SRCDIR): Add nds32-tdep.h.
6246 (ALLDEPFILES): Add nds32-tdep.c.
6247 * NEWS: Mention new NDS32 port.
6248 * configure.tgt: Add NDS32.
6249 * nds32-tdep.c: New file.
6250 * nds32-tdep.h: New file.
6251 * features/Makefile (XMLTOC): Add nds32.xml.
6252 * features/nds32-core.xml: New file.
6253 * features/nds32-fpu.xml: New file.
6254 * features/nds32-system.xml: New file.
6255 * features/nds32.c: New file (generated).
6256 * features/nds32.xml: New file.
6258 2016-06-14 John Baldwin <jhb@FreeBSD.org>
6260 * v850-tdep.c (v850_use_struct_convention): Trim type length checks.
6262 2016-06-14 John Baldwin <jhb@FreeBSD.org>
6264 * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.
6266 2016-06-14 John Baldwin <jhb@FreeBSD.org>
6268 * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.
6270 2016-06-13 Nick Clifton <nickc@redhat.com>
6272 * gdbtypes.c (replace_type): Fix assertion.
6274 2016-06-10 Tom Tromey <tom@tromey.com>
6276 * gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
6277 (arch_boolean_type, arch_float_type, arch_complex_type)
6278 (arch_flags_type, append_flags_type_field)
6279 (append_flags_type_flag, arch_composite_type)
6280 (append_composite_type_field_raw)
6281 (append_composite_type_field_aligned)
6282 (append_composite_type_field): Make "name" parameter const.
6283 * gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
6284 (arch_boolean_type, arch_float_type, arch_complex_type)
6285 (append_composite_type_field, append_composite_type_field_aligned)
6286 (append_composite_type_field_raw, arch_flags_type)
6287 (append_flags_type_field, append_flags_type_flag): Constify.
6289 2016-06-10 Tom Tromey <tom@tromey.com>
6292 * rust-exp.y (lex_number): Don't truncate large numbers to i32.
6294 2016-06-10 Tom Tromey <tom@tromey.com>
6296 * Makefile.in (COMMON_OBS): Remove rust-exp.o.
6297 (YYFILES): Add rust-exp.c.
6298 (YYOBJ): Add rust-exp.o.
6299 (local-maintainer-clean): Remove rust-exp.c.
6301 2016-06-09 Toshihito Kikuchi <k.toshihito@yahoo.de>
6303 * NEWS: Mention that GDB now supports a negative repeat count in
6305 * printcmd.c (decode_format): Allow '-' in the parameter
6306 "string_ptr" to accept a negative repeat count.
6307 (find_instruction_backward): New function.
6308 (read_memory_backward): New function.
6309 (integer_is_zero): New function.
6310 (find_string_backward): New function.
6311 (do_examine): Use new functions to examine memory backward.
6312 (_initialize_printcmd): Mention that 'x' command supports a negative
6315 2016-06-09 Toshihito Kikuchi <k.toshihito@yahoo.de>
6317 * MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.
6319 2016-06-09 Tom Tromey <tom@tromey.com>
6322 * python/py-xmethods.c (invoke_method_name)
6323 (py_get_result_type_method_name, py_invoke_method_name): Remove.
6324 (gdbpy_initialize_xmethods): Don't initialize
6325 py_invoke_method_name, py_get_result_type_method_name.
6327 2016-06-07 Simon Marchi <simon.marchi@ericsson.com>
6329 * mi/mi-interp.c (mi_record_changed): Add missing braces.
6331 2016-06-07 Bernhard Heckel <bernhard.heckel@intel.com>
6333 * findvar.c (follow_static_link): Check for valid pointer.
6335 2016-06-06 Simon Marchi <simon.marchi@ericsson.com>
6337 * NEWS: Mention the new fields in =record-started.
6338 * common/btrace-common.h (btrace_format_short_string): New function
6340 * common/btrace-common.c (btrace_format_short_string): New
6342 * mi/mi-interp.c (mi_record_changed): Output method and format
6343 fields in the =record-started record.
6344 * record-btrace.c (record_btrace_open): Adapt record_changed
6346 * record-full.c (record_full_open): Likewise.
6347 * record.c (cmd_record_stop): Likewise.
6349 2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
6351 * windows-nat.c (handle_output_debug_string): Return type of
6352 gdb_signal_from_host() is gdb_signal, not an int.
6353 (windows_get_exec_module_filename): Add pointer casts for C++.
6355 2016-06-02 Tom Tromey <tom@tromey.com>
6358 * python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
6360 2016-06-01 Pedro Alves <palves@redhat.com>
6362 * remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
6364 (remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
6365 (remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
6367 (remote_fileio_o_quit_handler): New global.
6368 (remote_fileio_quit_handler): New function.
6369 (remote_fileio_reply): Check the quit flag instead of the custom
6370 'remote_fio_ctrl_c_flag' flag. Restore the quit handler instead
6371 of changing the SIGINT handler.
6372 (do_remote_fileio_request): Override the quit handler instead of
6373 changing the SIGINT handler.
6375 2016-06-01 Nick Clifton <nickc@redhat.com>
6377 * common/common-utils.c (xmalloc_failed): New function. Provided
6378 so that the version in libiberty is not linked in.
6380 2016-06-01 Markus Metzger <markus.t.metzger@intel.com>
6382 * infcmd.c (skip_finish_frames): New.
6383 (finish_command): Call skip_finish_frames.
6385 2016-06-01 Yao Qi <yao.qi@linaro.org>
6388 * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
6389 quit_serial_event_set.
6391 2016-06-01 Joel Brobecker <brobecker@adacore.com>
6393 GDB 7.11.1 released.
6395 2016-05-31 Martin Galvan <martin.galvan@tallertechnologies.com>
6398 * dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
6399 fetch_const_value_from_synthetic_pointer): New functions.
6400 (indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
6401 (pieced_value_funcs): Implement coerce_ref.
6402 * valops.c (value_addr): Call coerce_ref for synthetic references.
6403 * valprint.c (valprint_check_validity): Return true for synthetic
6404 references. Also, don't show "<synthetic pointer>" if they reference
6406 (generic_val_print_ref): Handle synthetic references. Also move some
6407 code to print_ref_address.
6408 (print_ref_address, get_value_addr_contents): New functions.
6410 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
6413 * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
6414 (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
6415 (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
6416 (read_call_site_scope): Adjust callers.
6417 (dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
6418 (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
6420 2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
6422 Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
6423 * dwarf2read.c (enum pc_bounds_kind) New.
6424 (dwarf2_get_pc_bounds): Use it in the declaration.
6425 (process_psymtab_comp_unit_reader): Adjust caller. Rename has_pc_info
6427 (read_func_scope, read_lexical_block_scope, read_call_site_scope):
6429 (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
6430 (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
6432 2016-05-29 Jan Kratochvil <jan.kratochvil@redhat.com>
6434 * NEWS (QCatchSyscalls): Remove the parameter. Include ...
6435 (QCatchSyscalls:1 in qSupported) ... this separate entry which got
6438 2016-05-29 Jan Kratochvil <jan.kratochvil@redhat.com>
6440 * NEWS (N stop reply): Remove empty line.
6442 2016-05-28 Alan Modra <amodra@gmail.com>
6444 * compile/compile-object-load.c (link_callbacks_multiple_definition,
6445 link_callbacks_warning, link_callbacks_undefined_symbol,
6446 link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
6447 link_callbacks_reloc_dangerous,
6448 link_callbacks_unattached_reloc): Return void.
6450 2016-05-27 Andrew Burgess <andrew.burgess@embecosm.com>
6452 * opencl-lang.c (evaluate_subexp_opencl): If
6453 EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
6454 the returned value in the STRUCTOP_STRUCT case.
6456 2016-05-27 Andrew Burgess <andrew.burgess@embecosm.com>
6458 * eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
6459 mode, forward the VALUE_LVAL attribute to the returned value in
6460 the STRUCTOP_PTR case.
6462 2016-05-25 Tom Tromey <tom@tromey.com>
6464 * python/py-value.c (value_object_as_number): Use correct spelling
6465 of HAVE_LIBPYTHON2_4.
6467 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
6469 * f-typeprint.c (f_type_print_base): Replace 0 by show.
6471 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
6473 * f-typeprint.c (f_type_print_base): Decrease show by one.
6475 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
6477 * f-typeprint.c (f_type_print_base): Don't print fields when show < 0.
6479 2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
6481 * f-typeprint.c (f_type_print_base): Take print level into account.
6483 2016-05-24 Tom Tromey <tom@tromey.com>
6486 * python/py-value.c (value_object_as_number): Add
6487 nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.
6489 2016-05-24 Tom Tromey <tom@tromey.com>
6491 * python/py-value.c (value_object_as_number): Add
6492 nb_inplace_divide for Python 2.
6494 2016-05-23 Tom Tromey <tom@tromey.com>
6497 * python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
6498 when there are no breakpoints.
6500 2016-05-24 Pedro Alves <palves@redhat.com>
6503 * linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
6504 resumed, and add the thread to GDB's thread list.
6506 2016-05-24 Pedro Alves <palves@redhat.com>
6509 * linux-nat.c (get_pending_status): If the thread reported the
6510 event to the core and it's pending, use the pending status signal
6513 2016-05-24 Pedro Alves <palves@redhat.com>
6516 * linux-nat.c (lwp_lwpid_htab): New htab.
6517 (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
6518 (lwp_lwpid_htab_add_lwp): New functions.
6519 (lwp_list): Tweak comment.
6520 (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
6522 (purge_lwp_list): Rewrite, using htab_traverse_noresize.
6523 (add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
6524 (delete_lwp): Use lwp_list_remove. Remove htab too.
6525 (find_lwp_pid): Search in htab.
6526 (_initialize_linux_nat): Call lwp_lwpid_htab_create.
6527 * linux-nat.h (struct lwp_info) <prev>: New field.
6529 2016-05-24 Pedro Alves <palves@redhat.com>
6532 * linux-nat.c (lwp_lwpid_htab): New htab.
6533 (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
6534 (lwp_lwpid_htab_add_lwp): New functions.
6535 (lwp_list): Tweak comment.
6536 (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
6538 (purge_lwp_list): Rewrite, using htab_traverse_noresize.
6539 (add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
6540 (delete_lwp): Use lwp_list_remove. Remove htab too.
6541 (find_lwp_pid): Search in htab.
6542 (_initialize_linux_nat): Call lwp_lwpid_htab_create.
6543 * linux-nat.h (struct lwp_info) <prev>: New field.
6545 2016-05-24 Pedro Alves <palves@redhat.com>
6548 * linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
6550 (linux_nat_update_thread_list): Don't fetch the core if already
6553 2016-05-24 Pedro Alves <palves@redhat.com>
6556 * linux-tdep.c (find_mapping_size): Delete.
6557 (linux_vsyscall_range_raw): Rewrite reading from
6558 /proc/PID/task/PID/maps directly instead of using
6559 gdbarch_find_memory_regions.
6561 2016-05-24 Pedro Alves <palves@redhat.com>
6564 * linux-nat.c (report_thread_events): New global.
6565 (linux_handle_extended_wait): Report
6566 TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
6568 (wait_lwp, linux_nat_filter_event): Report all thread exits if
6569 thread event reporting is enabled. Remove comment.
6570 (filter_exit_event): New function.
6571 (linux_nat_wait_1): Use it.
6572 (linux_nat_thread_events): New function.
6573 (linux_nat_add_target): Install it as target_thread_events method.
6575 2016-05-24 Yan-Ting Lin <currygt52@gmail.com>
6577 * MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".
6579 2016-05-23 Yao Qi <yao.qi@arm.com>
6581 * arch-utils.c (default_code_of_frame_writable): New function.
6582 * arch-utils.h (default_code_of_frame_writable): Declare.
6583 * arm-tdep.c (arm_code_of_frame_writable): New function.
6584 (arm_gdbarch_init): Install gdbarch method
6585 code_of_frame_writable if the target is M-profile.
6586 * frame.c (skip_unwritable_frames): New function.
6587 * frame.h (skip_unwritable_frames): Declare.
6588 * gdbarch.sh (code_of_frame_writable): New.
6589 * gdbarch.c, gdbarch.h: Re-generated.
6590 * infcmd.c (finish_command): Call skip_unwritable_frames.
6592 2016-05-23 Tom Tromey <tom@tromey.com>
6594 PR python/19438, PR python/18393:
6595 * python/py-objfile.c (objfpy_initialize): Initialize self->dict.
6596 * python/py-progspace.c (pspy_initialize): Initialize self->dict.
6598 2016-05-23 Gary Benson <gbenson@redhat.com>
6600 * nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
6601 * linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
6603 (try_thread_db_load_1): Remove td_thr_validate initialization.
6605 2016-05-23 Jon Boden <jon@ubuntubsd.org> (tiny change)
6607 * configure.ac: Search for libutil-freebsd as alternative to libutil.
6608 * configure: Re-generated.
6610 2016-05-19 Andreas Schwab <schwab@suse.de>
6612 * ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
6613 (libunwind_frame_set_descr): Likewise.
6614 (libunwind_frame_cache): Likewise.
6615 (libunwind_frame_dealloc_cache): Likewise.
6616 (libunwind_frame_sniffer): Likewise.
6617 (libunwind_search_unwind_table): Likewise.
6618 (libunwind_sigtramp_frame_sniffer): Likewise.
6619 (libunwind_get_reg_special): Likewise.
6620 (libunwind_load): Likewise.
6621 * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
6622 (ia64_linux_store_register): Likewise.
6623 (ia64_linux_xfer_partial): Likewise.
6624 * ia64-tdep.c (ia64_access_reg): Likewise.
6625 (ia64_access_fpreg): Likewise.
6626 (ia64_access_rse_reg): Likewise.
6627 (ia64_access_rse_fpreg): Likewise.
6629 2016-05-18 Tom Tromey <tom@tromey.com>
6631 * rust-lang.c (rust_subscript): Initialize "high".
6633 2016-05-17 Simon Marchi <simon.marchi@ericsson.com>
6636 * mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
6637 of target_is_async_p.
6639 2016-05-17 Simon Marchi <simon.marchi@ericsson.com>
6642 * mi/mi-main.c (run_one_inferior): Use run target to determine
6643 whether to run async or not.
6644 (mi_cmd_exec_run): Likewise.
6646 2016-05-17 Tom Tromey <tom@tromey.com>
6648 * std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
6649 * rust-lang.c: Don't include f-lang.h.
6650 (rust_range, rust_compute_range, rust_subscript)
6651 (rust_evaluate_subexp): Update.
6652 * rust-exp.y: Don't include f-lang.h.
6653 (ast_range, convert_ast_to_expression): Update.
6654 * parse.c (operator_length_standard): Update.
6655 * f-lang.h (enum f90_range_type): Move to expression.h.
6656 * f-exp.y: Use OP_RANGE.
6657 * expression.h (enum range_type): New enum; renamed from
6659 * expprint.c: Don't include f-lang.h.
6660 (print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
6661 * eval.c (value_f90_subarray, evaluate_subexp_standard): Update.
6663 2016-05-17 Tom Tromey <tom@tromey.com>
6665 * NEWS: Add Rust item.
6667 2016-05-17 Tom Tromey <tom@tromey.com>
6668 Manish Goregaokar <manishsmail@gmail.com>
6670 * symtab.c (symbol_find_demangled_name): Handle Rust.
6671 * symfile.c (init_filename_language_table): Treat ".rs" as Rust.
6672 * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
6674 * rust-lang.h: New file.
6675 * rust-lang.c: New file.
6676 * rust-exp.y: New file.
6677 * dwarf2read.c (read_file_scope): Add Rust producer sniffing.
6678 (dwarf2_compute_name, read_func_scope, read_structure_type)
6679 (read_base_type, read_subrange_type, set_cu_language)
6680 (new_symbol_full, determine_prefix): Handle Rust.
6681 * defs.h (enum language) <language_rust>: New constant.
6682 * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
6683 (COMMON_OBS): Add rust-exp.o, rust-lang.o.
6685 2016-05-17 Tom Tromey <tom@tromey.com>
6687 * valprint.h (struct generic_val_print_array) <array_start,
6688 array_end>: New fields.
6689 * valprint.c (generic_val_print_array): Add "decorations"
6690 parameter. Use "array_start", "array_end".
6691 (generic_val_print) <TYPE_CODE_ARRAY>: Update.
6692 * p-valprint.c (p_decorations): Update.
6693 * m2-valprint.c (m2_decorations): Update.
6694 * f-valprint.c (f_decorations): Update.
6695 * c-valprint.c (c_decorations): Update.
6697 2016-05-17 Tom Tromey <tom@tromey.com>
6699 * NEWS: Add "maint selftest" entry.
6700 * selftest.h: New file.
6701 * selftest.c: New file.
6702 * maint.c: Include selftest.h.
6703 (maintenance_selftest): New function.
6704 (_initialize_maint_cmds): Add "maint selftest" command.
6705 * configure.ac (GDB_SELF_TEST): Maybe define.
6706 * config.in, configure: Rebuild.
6707 * Makefile.in (SFILES): Add selftest.c.
6708 (COMMON_OBS): Add selftest.o.
6710 2016-05-17 Tom Tromey <tom@tromey.com>
6712 * expprint.c: Include f-lang.h.
6713 (print_subexp_standard, dump_subexp_body_standard): Handle
6716 2016-05-17 Tom Tromey <tom@tromey.com>
6718 * Makefile.in (init.c): Search .y files for initialization
6721 2016-05-12 Doug Evans <dje@google.com>
6724 * dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
6727 2016-05-10 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
6729 * iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
6731 * linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.
6733 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
6735 * arm-tdep.c (arm_elf_make_msymbol_special): Use
6736 ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
6738 2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
6740 * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
6742 * aarch64-tdep.c (aarch64_skip_prologue): Likewise.
6743 (aarch64_scan_prologue): Likewise.
6744 (aarch64_prologue_prev_register): Likewise.
6745 (aarch64_dwarf2_prev_register): Likewise.
6746 (pass_in_v): Likewise.
6747 (aarch64_push_dummy_call): Likewise.
6748 (aarch64_breakpoint_from_pc): Likewise.
6749 (aarch64_return_in_memory): Likewise.
6750 (aarch64_return_value): Likewise.
6751 (aarch64_displaced_step_b_cond): Likewise.
6752 (aarch64_displaced_step_cb): Likewise.
6753 (aarch64_displaced_step_tb): Likewise.
6754 (aarch64_gdbarch_init): Likewise.
6755 (aarch64_process_record): Likewise.
6756 * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
6757 * alpha-tdep.c (_initialize_alpha_tdep): Likewise.
6758 * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
6759 * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
6760 * amd64-tdep.c (fixup_riprel): Likewise.
6761 * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
6762 (amd64_windows_frame_decode_insns): Likewise.
6763 (amd64_windows_frame_cache): Likewise.
6764 (amd64_windows_frame_prev_register): Likewise.
6765 (amd64_windows_frame_this_id): Likewise.
6766 (amd64_windows_init_abi): Likewise.
6767 * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
6768 (arm_linux_get_next_pcs_syscall_next_pc): Likewise.
6769 * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
6770 * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
6771 (arm_epilogue_frame_prev_register): Likewise.
6772 (arm_record_vdata_transfer_insn): Likewise.
6773 (arm_record_exreg_ld_st_insn): Likewise.
6774 * auto-load.c (execute_script_contents): Likewise.
6775 (print_scripts): Likewise.
6776 * avr-tdep.c (avr_frame_prev_register): Likewise.
6777 (avr_push_dummy_call): Likewise.
6778 * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
6779 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
6780 * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
6781 * break-catch-throw.c (fetch_probe_arguments): Likewise.
6782 * breakpoint.c (breakpoint_xfer_memory): Likewise.
6783 (breakpoint_init_inferior): Likewise.
6784 (breakpoint_inserted_here_p): Likewise.
6785 (software_breakpoint_inserted_here_p): Likewise.
6786 (hardware_breakpoint_inserted_here_p): Likewise.
6787 (bpstat_what): Likewise.
6788 (break_range_command): Likewise.
6789 (save_breakpoints): Likewise.
6790 * coffread.c (coff_symfile_read): Likewise.
6791 * cris-tdep.c (cris_push_dummy_call): Likewise.
6792 (cris_scan_prologue): Likewise.
6793 (cris_register_size): Likewise.
6794 (_initialize_cris_tdep): Likewise.
6795 * d-exp.y: Likewise.
6796 * dbxread.c (dbx_read_symtab): Likewise.
6797 (process_one_symbol): Likewise.
6798 (coffstab_build_psymtabs): Likewise.
6799 (elfstab_build_psymtabs): Likewise.
6800 * dicos-tdep.c (dicos_init_abi): Likewise.
6801 * disasm.c (do_mixed_source_and_assembly): Likewise.
6802 (gdb_disassembly): Likewise.
6803 * dtrace-probe.c (dtrace_process_dof): Likewise.
6804 * dwarf2read.c (error_check_comp_unit_head): Likewise.
6805 (build_type_psymtabs_1): Likewise.
6806 (skip_one_die): Likewise.
6807 (process_imported_unit_die): Likewise.
6808 (dwarf2_physname): Likewise.
6809 (read_file_scope): Likewise.
6810 (setup_type_unit_groups): Likewise.
6811 (create_dwo_cu_reader): Likewise.
6812 (create_dwo_cu): Likewise.
6813 (create_dwo_unit_in_dwp_v1): Likewise.
6814 (create_dwo_unit_in_dwp_v2): Likewise.
6815 (lookup_dwo_unit_in_dwp): Likewise.
6816 (free_dwo_file): Likewise.
6817 (check_producer): Likewise.
6818 (dwarf2_add_typedef): Likewise.
6819 (dwarf2_add_member_fn): Likewise.
6820 (read_unsigned_leb128): Likewise.
6821 (read_signed_leb128): Likewise.
6822 (dwarf2_const_value): Likewise.
6823 (follow_die_sig_1): Likewise.
6824 (dwarf_decode_macro_bytes): Likewise.
6825 * extension.c (restore_active_ext_lang): Likewise.
6826 * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
6827 * ft32-tdep.c (ft32_analyze_prologue): Likewise.
6828 * gdbtypes.c (lookup_typename): Likewise.
6829 (resolve_dynamic_range): Likewise.
6830 (check_typedef): Likewise.
6831 * h8300-tdep.c (h8300_is_argument_spill): Likewise.
6832 (h8300_gdbarch_init): Likewise.
6833 * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
6834 (hppa_frame_this_id): Likewise.
6835 (_initialize_hppa_tdep): Likewise.
6836 * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
6837 * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
6838 * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
6839 * i386-tdep.c (i386_bnd_type): Likewise.
6840 (i386_gdbarch_init): Likewise.
6841 (i386_mpx_bd_base): Likewise.
6842 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
6843 * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
6844 * ia64-tdep.c (examine_prologue): Likewise.
6845 (ia64_frame_cache): Likewise.
6846 (ia64_push_dummy_call): Likewise.
6847 * infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
6848 (default_print_one_register_info): Likewise.
6849 * infrun.c (infrun_thread_ptid_changed): Likewise.
6850 (thread_still_needs_step_over): Likewise.
6851 (stop_all_threads): Likewise.
6852 (restart_threads): Likewise.
6853 (keep_going_stepped_thread): Likewise.
6854 * iq2000-tdep.c (iq2000_scan_prologue): Likewise.
6855 * language.c (language_init_primitive_type_symbols): Likewise.
6856 * linespec.c (add_sal_to_sals): Likewise.
6857 * linux-nat.c (status_callback): Likewise.
6858 (kill_unfollowed_fork_children): Likewise.
6859 (linux_nat_kill): Likewise.
6860 * linux-tdep.c (linux_fill_prpsinfo): Likewise.
6861 * linux-thread-db.c (thread_db_notice_clone): Likewise.
6862 (record_thread): Likewise.
6863 * location.c (string_to_event_location_basic): Likewise.
6864 * m32c-tdep.c (m32c_prev_register): Likewise.
6865 * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
6866 * m32r-tdep.c (decode_prologue): Likewise.
6867 * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
6868 * machoread.c (macho_symtab_read): Likewise.
6869 (macho_symfile_read): Likewise.
6870 (macho_symfile_offsets): Likewise.
6871 * maint.c (set_per_command_cmd): Likewise.
6872 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
6873 (mi_cmd_stack_list_variables): Likewise.
6874 * mi/mi-main.c (mi_cmd_exec_run): Likewise.
6875 (output_register): Likewise.
6876 (mi_cmd_execute): Likewise.
6877 (mi_cmd_trace_define_variable): Likewise.
6878 (print_variable_or_computed): Likewise.
6879 * minsyms.c (prim_record_minimal_symbol_full): Likewise.
6880 * mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
6881 * msp430-tdep.c (msp430_pseudo_register_write): Likewise.
6882 * mt-tdep.c (mt_registers_info): Likewise.
6883 * nios2-tdep.c (nios2_analyze_prologue): Likewise.
6884 (nios2_push_dummy_call): Likewise.
6885 (nios2_frame_unwind_cache): Likewise.
6886 (nios2_stub_frame_cache): Likewise.
6887 (nios2_stub_frame_sniffer): Likewise.
6888 (nios2_gdbarch_init): Likewise.
6889 * ppc-ravenscar-thread.c: Likewise.
6890 * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
6891 * python/py-evts.c (add_new_registry): Likewise.
6892 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
6893 (bpfinishpy_detect_out_scope_cb): Likewise.
6894 * python/py-framefilter.c (py_print_value): Likewise.
6895 * python/py-inferior.c (infpy_write_memory): Likewise.
6896 * python/py-infevents.c (create_inferior_call_event_object): Likewise.
6897 * python/py-infthread.c (thpy_get_ptid): Likewise.
6898 * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
6899 (ltpy_get_all_source_lines): Likewise.
6900 (ltpy_is_valid): Likewise.
6901 (ltpy_iternext): Likewise.
6902 * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
6903 * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
6904 (unwind_infopy_str): Likewise.
6905 * python/py-varobj.c (py_varobj_get_iterator): Likewise.
6906 * ravenscar-thread.c (ravenscar_inferior_created): Likewise.
6907 * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
6908 * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
6909 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
6910 * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
6911 (s390_frame_prev_register): Likewise.
6912 (s390_dwarf2_frame_init_reg): Likewise.
6913 (s390_record_vr): Likewise.
6914 (s390_process_record): Likewise.
6915 * score-tdep.c (score_push_dummy_call): Likewise.
6916 (score3_analyze_prologue): Likewise.
6917 * sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
6918 * sh64-tdep.c (sh64_analyze_prologue): Likewise.
6919 (sh64_push_dummy_call): Likewise.
6920 (sh64_extract_return_value): Likewise.
6921 (sh64_do_fp_register): Likewise.
6922 * solib-aix.c (solib_aix_get_section_offsets): Likewise.
6923 * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
6924 (darwin_solib_read_all_image_info_addr): Likewise.
6925 * solib-dsbt.c (enable_break): Likewise.
6926 * solib-frv.c (enable_break2): Likewise.
6927 (frv_fdpic_find_canonical_descriptor): Likewise.
6928 * solib-svr4.c (svr4_handle_solib_event): Likewise.
6929 * sparc-tdep.c (sparc_skip_stack_check): Likewise.
6930 * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
6931 * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
6932 * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
6933 * stack.c (read_frame_local): Likewise.
6934 * symfile.c (symbol_file_add_separate): Likewise.
6935 (remove_symbol_file_command): Likewise.
6936 * symmisc.c (maintenance_print_one_line_table): Likewise.
6937 * symtab.c (symbol_cache_flush): Likewise.
6938 (basic_lookup_transparent_type): Likewise.
6939 (sort_search_symbols_remove_dups): Likewise.
6940 * target.c (target_memory_map): Likewise.
6941 (target_detach): Likewise.
6942 (target_resume): Likewise.
6943 (acquire_fileio_fd): Likewise.
6944 (target_store_registers): Likewise.
6945 * thread.c (print_thread_info_1): Likewise.
6946 * tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
6947 * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
6948 * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
6949 (tilegx_analyze_prologue): Likewise.
6950 (tilegx_stack_frame_destroyed_p): Likewise.
6951 (tilegx_frame_cache): Likewise.
6952 * tracefile.c (trace_save): Likewise.
6953 * tracepoint.c (encode_actions_and_make_cleanup): Likewise.
6954 (start_tracing): Likewise.
6955 (print_one_static_tracepoint_marker): Likewise.
6956 * tui/tui.c (tui_enable): Likewise.
6957 * valops.c (value_struct_elt_bitpos): Likewise.
6958 (find_overload_match): Likewise.
6959 (find_oload_champ): Likewise.
6960 * value.c (value_contents_copy_raw): Likewise.
6961 * windows-tdep.c (windows_get_tlb_type): Likewise.
6962 * x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
6963 * xcoffread.c (record_minimal_symbol): Likewise.
6964 (scan_xcoff_symtab): Likewise.
6965 * xtensa-tdep.c (execute_code): Likewise.
6966 (xtensa_gdbarch_init): Likewise.
6967 (_initialize_xtensa_tdep): Likewise.
6969 2016-05-04 Ulrich Weigand <uweigand@de.ibm.com>
6971 * spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
6972 (spu_bfd_open): Likewise.
6974 2016-05-04 Yao Qi <yao.qi@linaro.org>
6977 * corefile.c (read_memory): Rename it to ...
6978 (read_memory_object): ... it. Add parameter object.
6979 (read_memory): Call read_memory_object.
6980 (read_stack): Likewise.
6981 (read_code): Likewise.
6983 2016-05-03 Yunlian Jiang <yunlian@google.com>
6984 Doug Evans <dje@google.com>
6987 * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
6988 is separate debug file.
6990 2016-05-03 Don Breazeal <donb@codesourcery.com>
6992 * serial.h (gdb_pipe): Fix argument names in comment.
6994 2016-05-03 Pedro Alves <palves@redhat.com>
6997 * python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
7000 2016-05-03 Pedro Alves <palves@redhat.com>
7002 * python/python.c (_initialize_python) [IS_PY3K]: Remove dead
7005 2016-05-03 Pedro Alves <palves@redhat.com>
7007 * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
7008 * configure: Regenerate.
7010 2016-05-03 Pedro Alves <palves@redhat.com>
7012 * configure.ac (checking for the dynamic export flag): Add
7013 $PYTHON_CPPFLAGS to CPPFLAGS.
7014 * configure: Regenerate.
7016 2016-05-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
7018 * symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
7020 (find_pc_mapped_section): Likewise.
7021 (list_overlays_command): Likewise.
7023 2016-05-02 Eli Zaretskii <eliz@gnu.org>
7025 * windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
7026 error in allocation of space for "$HOME/.gdbinit" string. This
7027 caused GDB to abort on startup whenever a '~/gdb.ini' file was
7028 actually found, because xsnprintf would hit an assertion
7031 2016-04-28 Simon Marchi <simon.marchi@ericsson.com>
7033 * cli/cli-decode.c (help_cmd_list): Do not list commands that
7036 2016-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
7038 * remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.
7040 2016-04-27 Martin Galvan <martin.galvan@tallertechnologies.com>
7042 * c-valprint.c (c_value_print): Always convert val back to reference
7043 type if we converted it to a pointer type.
7045 2016-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
7047 * configure.ac: Enhance configure check for babeltrace to reject
7048 non-C++-enabled versions.
7049 * configure: Regenerate.
7051 2016-04-26 Sanimir Agovic <sanimir.agovic@intel.com>
7052 Keven Boell <keven.boell@intel.com>
7053 Bernhard Heckel <bernhard.heckel@intel.com>
7055 * f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
7057 (F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
7058 (f77_print_array_1): Use value_subscript to subscript a
7060 (f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
7061 (f_val_print): Use value_field to construct a field value.
7063 2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
7065 * valarith.c (value_address): Resolve dynamic types.
7067 2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
7068 Keven Boell <kevel.boell@intel.com>
7070 * NEWS: Add new supported features for fortran.
7071 * gdbtypes.c (remove_dyn_prop): New.
7072 (resolve_dynamic_struct): Keep type length for fortran structs.
7073 * gdbtypes.h: Forward declaration of new function.
7074 * value.c (value_address): Return dynamic resolved location of a value.
7075 (set_value_component_location): Adjust the value address
7076 for single value prints.
7077 (value_primitive_field): Support value types with a dynamic location.
7078 (set_internalvar): Remove dynamic location property of
7081 2016-04-25 Pedro Alves <palves@redhat.com>
7082 Yao Qi <yao.qi@linaro.org>
7084 * mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
7085 object. Insert it if it is not inserted yet. Increase the
7086 refcount and link it into the proc's raw breakpoint list.
7088 2016-04-25 Yao Qi <yao.qi@linaro.org>
7090 * breakpoint.c (should_be_inserted): Return 0 if the location's
7091 owner is not single step breakpoint or single step breakpoint's
7092 thread isn't the thread which is stepping past a breakpoint.
7093 * gdbarch.sh (software_single_step): Update comments.
7094 * gdbarch.h: Regenerated.
7095 * infrun.c (struct step_over_info) <thread>: New field.
7096 (set_step_over_info): New argument 'thread'. Callers updated.
7097 (clear_step_over_info): Set field thread to -1.
7098 (thread_is_stepping_over_breakpoint): New function.
7099 * infrun.h (thread_is_stepping_over_breakpoint): Declaration.
7101 2016-04-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
7103 * ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
7104 and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.
7106 2016-04-22 Yao Qi <yao.qi@linaro.org>
7108 * valops.c (read_value_memory): New local variable 'stack'.
7109 Set it to either TARGET_OBJECT_STACK_MEMORY or
7110 TARGET_OBJECT_MEMORY.
7112 2016-04-22 Pedro Alves <palves@redhat.com>
7114 * ada-exp.y: Remove all yy symbol remappings.
7115 (GDB_YY_REMAP_PREFIX): Define.
7116 Include "yy-remap.h".
7117 * ada-lang.c (ada_language_defn): Adjust.
7118 * ada-lang.h (ada_error): Rename to ...
7119 (ada_yyerror): ... this.
7120 * c-exp.y: Remove all yy symbol remappings.
7121 (GDB_YY_REMAP_PREFIX): Define.
7122 Include "yy-remap.h".
7123 * c-lang.c (c_language_defn, cplus_language_defn)
7124 (asm_language_defn, minimal_language_defn): Adjust.
7125 * c-lang.h (c_error): Rename to ...
7126 (c_yyerror): ... this.
7127 * d-exp.y: Remove all yy symbol remappings.
7128 (GDB_YY_REMAP_PREFIX): Define.
7129 Include "yy-remap.h".
7130 * d-lang.c (d_language_defn): Adjust.
7131 * d-lang.h (d_error): Rename to ...
7132 (d_yyerror): ... this.
7133 * f-exp.y: Remove all yy symbol remappings.
7134 (GDB_YY_REMAP_PREFIX): Define.
7135 Include "yy-remap.h".
7136 * f-lang.c (f_language_defn): Adjust.
7137 * f-lang.h (f_error): Rename to ...
7138 (f_yyerror): ... this.
7139 * go-exp.y: Remove all yy symbol remappings.
7140 (GDB_YY_REMAP_PREFIX): Define.
7141 Include "yy-remap.h".
7142 * go-lang.c (go_language_defn): Adjust.
7143 * go-lang.h (go_error): Rename to ...
7144 (go_yyerror): ... this.
7145 * jv-exp.y: Remove all yy symbol remappings.
7146 (GDB_YY_REMAP_PREFIX): Define.
7147 Include "yy-remap.h".
7148 * jv-lang.c (java_language_defn): Adjust.
7149 * jv-lang.h (java_error): Rename to ...
7150 (java_yyerror): ... this.
7151 * m2-exp.y: Remove all yy symbol remappings.
7152 (GDB_YY_REMAP_PREFIX): Define.
7153 Include "yy-remap.h".
7154 * m2-lang.c (m2_language_defn): Adjust.
7155 * m2-lang.h (m2_error): Rename to ...
7156 (m2_yyerror): ... this.
7157 * objc-exp.y: Remove all yy symbol remappings.
7158 (GDB_YY_REMAP_PREFIX): Define.
7159 Include "yy-remap.h".
7160 * objc-lang.c (objc_language_defn): Adjust.
7161 * opencl-lang.c (opencl_language_defn): Adjust.
7162 * p-exp.y: Remove all yy symbol remappings.
7163 (GDB_YY_REMAP_PREFIX): Define.
7164 Include "yy-remap.h".
7165 * p-lang.c (pascal_language_defn): Adjust.
7166 * p-lang.h (pascal_error): Rename to ...
7167 (pascal_yyerror): ... this.
7168 * yy-remap.h: New file.
7170 2016-04-22 Pedro Alves <palves@redhat.com>
7172 * common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
7173 the foreign frames issue.
7174 [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
7176 2016-04-22 Pedro Alves <palves@redhat.com>
7178 * common/common-exceptions.c (enum catcher_state, struct catcher)
7179 (current_catcher): Define in C++ mode too.
7180 (exceptions_state_mc_catch): Call throw_exception_sjlj instead of
7182 (throw_exception_sjlj, throw_exception_cxx): New functions,
7183 factored out from throw_exception.
7184 (throw_exception): Reimplement.
7185 * common/common-exceptions.h (exceptions_state_mc_init)
7186 (exceptions_state_mc_action_iter)
7187 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7188 Declare in C++ mode too.
7189 (TRY): Rename to ...
7190 (TRY_SJLJ): ... this.
7191 (CATCH): Rename to ...
7192 (CATCH_SJLJ): ... this.
7193 (END_CATCH): Rename to ...
7194 (END_CATCH_SJLJ): ... this.
7195 [GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
7197 (throw_exception): Update comments.
7198 (throw_exception_sjlj): Declare.
7199 * event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
7200 comment. Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
7201 intercepted exception.
7202 (gdb_rl_callback_handler): New function.
7203 (gdb_rl_callback_handler_install): Always install
7204 gdb_rl_callback_handler as readline callback.
7206 2016-04-22 Pedro Alves <palves@redhat.com>
7208 * event-top.c (rl_callback_read_char_wrapper): Rename to ...
7209 (gdb_rl_callback_read_char_wrapper): ... this.
7210 (change_line_handler, gdb_setup_readline): Adjust.
7212 2016-04-22 Yao Qi <yao.qi@linaro.org>
7214 * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
7217 2016-04-22 Joel Brobecker <brobecker@adacore.com>
7219 * MAINTAINER: Remove myself as AIX Maintainer.
7221 2016-04-22 Maciej W. Rozycki <macro@imgtec.com>
7223 * mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
7224 `num_regs' to 90 rather than 79. Where a target description is
7225 present adjust the setting appropriately.
7227 2016-04-21 Pedro Alves <palves@redhat.com>
7229 * common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
7230 (GDB_XCPT): Always define as GDB_XCPT_SJMP.
7232 2016-04-21 Pedro Alves <palves@redhat.com>
7234 * aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
7235 (aix_thread_resume): Use PTRACE_TYPE_ARG5.
7236 * rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
7237 (rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
7238 pointer, and cast return to gdb_byte pointer.
7240 2016-04-21 Pedro Alves <palves@redhat.com>
7242 * s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
7243 void * instead of gdb_byte *.
7245 2016-04-21 Pedro Alves <palves@redhat.com>
7247 * dwarf2read.c (try_open_dwop_file, open_dwo_file)
7248 (file_file_name, file_full_name): Add char * cast to sentinel in
7249 concat/reconcat calls.
7250 * event-top.c (top_level_prompt): Likewise.
7251 * guile/guile.c (initialize_scheme_side): Likewise.
7252 * linux-tdep.c (linux_fill_prpsinfo): Likewise.
7253 * macrotab.c (macro_source_fullname): Likewise.
7254 * main.c (get_init_files, captured_main): Likewise.
7255 * psymtab.c (psymtab_to_fullname): Likewise.
7256 * python/python.c (_initialize_python)
7257 (gdbpy_finish_initialization): Likewise.
7258 * source.c (symtab_to_fullname): Likewise.
7260 2016-04-20 Pedro Alves <palves@redhat.com>
7262 * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
7263 * configure: Renegerate.
7265 2016-04-20 Pedro Alves <palves@redhat.com>
7267 * darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
7269 2016-04-20 Pedro Alves <palves@redhat.com>
7271 * aarch64-tdep.c (aarch64_record_load_store): Change type of
7272 'reg_rm_val' local to ULONGEST.
7274 2016-04-20 Pedro Alves <palves@redhat.com>
7276 * darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.
7278 2016-04-20 Doug Evans <xdje42@gmail.com>
7280 * symmisc.c (dump_symtab_1): Print owning compunit for identical
7283 2016-04-20 Yao Qi <yao.qi@linaro.org>
7285 * aarch32-linux-nat.c: Include "arch/arm-linux.h".
7287 2016-04-20 Yao Qi <yao.qi@linaro.org>
7289 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
7290 * arch/arm-linux.h: ... here.
7292 2016-04-19 John Baldwin <jhb@FreeBSD.org>
7294 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
7296 (amd64bsd_store_inferior_registers): Likewise.
7297 * fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
7298 (resume_all_threads_cb): Likewise.
7299 * i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
7300 (i386bsd_collect_gregset): Likewise.
7301 (i386bsd_fetch_inferior_registers): Change xstateregs to void *.
7302 (i386bsd_store_inferior_registers): Likewise.
7304 2016-04-19 John Baldwin <jhb@FreeBSD.org>
7306 * main.c (setup_alternate_signal_stack): Cast to char *.
7308 2016-04-19 Doug Evans <xdje42@gmail.com>
7310 * symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
7311 All callers updated.
7313 2016-04-19 Doug Evans <xdje42@gmail.com>
7316 * source.c (is_regular_file): New arg errno_ptr.
7317 All callers updated.
7319 2016-04-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
7321 * linux-record.c (record_linux_system_call): Merge handling for
7322 readlink/recv/read and pipe/pipe2.
7324 2016-04-14 Walfred Tedeschi <walfred.tedeschi@intel.com>
7326 * features/i386/amd64-mpx-linux.xml: Remove AVX feature.
7327 * features/i386/amd64-mpx.xml: Remove AVX feature.
7328 * features/i386/i386-mpx-linux.xml: Remove AVX feature.
7329 * features/i386/i386-mpx.xml: Remove AVX feature.
7330 * features/i386/amd64-mpx-linux.c: Regenerate.
7331 * features/i386/amd64-mpx.c: Regenerate.
7332 * features/i386/i386-mpx-linux.c: Regenerate.
7333 * features/i386/i386-mpx.c: Regenerate.
7334 * regformats/i386/amd64-mpx-linux.dat: Regenerate.
7335 * regformats/i386/amd64-mpx.dat: Regenerate.
7336 * regformats/i386/i386-mpx-linux.dat: Regenerate.
7337 * regformats/i386/i386-mpx.dat: Regenerate.
7339 2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
7341 * amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
7343 (amd64_linux_core_read_description): Add case for
7344 X86_XSTATE_AVX_MPX_MASK.
7345 (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
7346 * amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
7347 * amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
7348 (amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
7349 (_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
7350 * common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
7351 (X86_XSTATE_AVX_MPX_MASK): New case.
7352 * features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
7353 (i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
7354 (i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
7355 (i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
7357 * i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
7359 (i386_linux_core_read_description): Add case
7360 X86_XSTATE_AVX_MPX_MASK.
7361 (_initialize_i386_linux_tdep): Call
7362 initialize_tdesc_i386_avx_mpx_linux.
7363 * i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
7364 * i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
7365 (i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
7366 * x86-linux-nat.c (x86_linux_read_description): Add case for
7367 X86_XSTATE_AVX_MPX_MASK.
7368 * features/i386/amd64-avx-mpx-linux.xml: New file.
7369 * features/i386/i386-avx-mpx-linux.xml: New file.
7370 * features/i386/i386-avx-mpx.xml: New file.
7371 * features/i386/amd64-avx-mpx.xml: New file.
7372 * features/i386/amd64-avx-mpx-linux.c: Generated.
7373 * features/i386/amd64-avx-mpx.c: Generated.
7374 * features/i386/i386-avx-mpx-linux.c: Generated.
7375 * features/i386/i386-avx-mpx.c: Generated.
7376 * regformats/i386/amd64-avx-mpx-linux.dat: Generated.
7377 * regformats/i386/amd64-avx-mpx.dat: Generated.
7378 * regformats/i386/i386-avx-mpx-linux.dat: Generated.
7379 * regformats/i386/i386-avx-mpx.dat: Generated.
7381 2016-04-18 Pedro Alves <palves@redhat.com>
7383 * ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
7384 * configure: Regenerate.
7386 2016-04-18 Martin Galvan <martin.galvan@tallertechnologies.com>
7388 * valops.c (value_addr): For C++ references, set the copied value's
7389 enclosing_type as well.
7391 2016-04-18 Yao Qi <yao.qi@linaro.org>
7394 2016-04-15 Yao Qi <yao.qi@linaro.org>
7396 * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
7397 PC is far from the end of function.
7399 2016-04-16 Pedro Alves <palves@redhat.com>
7401 * ada-exp.y (yydefred): Define as ada_yydefred.
7403 2016-04-15 Pedro Alves <palves@redhat.com>
7405 * ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
7408 2016-04-15 Pedro Alves <palves@redhat.com>
7410 * btrace.c (pt_btrace_insn_flags): Change return type to
7411 btrace_insn_flags. Use btrace_insn_flags for local.
7413 2016-04-15 Pedro Alves <palves@redhat.com>
7415 * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
7417 [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
7419 2016-04-15 Yao Qi <yao.qi@linaro.org>
7421 * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
7422 PC is far from the end of function.
7424 2016-04-14 Pedro Alves <palves@redhat.com>
7426 * cli/cli-cmds.c (alias_usage_error): New function.
7427 (alias_command): Use it.
7428 * ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
7429 ctf_save_write_metadata call.
7431 2016-04-14 Pedro Alves <palves@redhat.com>
7433 * ada-typeprint.c (print_fixed_point_type): Don't pass float as
7434 argument to function expecting LONGEST.
7435 * value.c (unpack_long): Add casts to LONGEST.
7437 2016-04-13 Luis Machado <lgustavo@codesourcery.com>
7439 * exec.c (exec_file_locate_attach): Guard a couple functions
7440 that can throw errors.
7441 (exception_print_same): New helper function.
7443 2016-04-13 Pedro Alves <palves@redhat.com>
7446 * remote.c (struct remote_state) <last_resume_exec_dir>: New
7448 (new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
7449 (remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
7450 (remote_resume): Store the last execution direction.
7451 (remote_execution_direction): New function.
7452 (init_remote_ops): Install it as to_execution_direction target_ops
7455 2016-04-12 Pedro Alves <palves@redhat.com>
7457 * common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
7458 [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
7460 2016-04-12 Pedro Alves <palves@redhat.com>
7462 * common/common-exceptions.c (struct catcher) <buf>: Now a
7463 'jmp_buf' instead of SIGJMP_BUF.
7464 (exceptions_state_mc_init): Change return type to 'jmp_buf'.
7465 (throw_exception): Use longjmp instead of SIGLONGJMP.
7466 * common/common-exceptions.h: Include <setjmp.h> instead of
7468 (exceptions_state_mc_init): Change return type to 'jmp_buf'.
7469 [GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
7471 * cp-support.c: Include "gdb_setjmp.h".
7473 2016-04-12 Pedro Alves <palves@redhat.com>
7475 * common/common-exceptions.c (exception_rethrow): Remove
7476 prepare_to_throw_exception call.
7477 * common/common-exceptions.h (prepare_to_throw_exception): Delete
7479 * exceptions.c (prepare_to_throw_exception): Delete.
7481 2016-04-12 Pedro Alves <palves@redhat.com>
7483 * target.c (target_check_pending_interrupt): Delete.
7484 * target.h (struct target_ops) <to_check_pending_interrupt>:
7486 (target_check_pending_interrupt): Remove declaration.
7487 * target-delegates.c: Regenerate.
7489 2016-04-12 Pedro Alves <palves@redhat.com>
7491 * defs.h: Update comments on SIGINT handling.
7492 (immediate_quit): Delete declaration.
7493 * event-loop.c (call_async_signal_handler): Delete.
7494 * event-loop.h (call_async_signal_handler): Delete declaration.
7495 (mark_async_signal_handler): Update comments.
7496 (gdb_call_async_signal_handler): Delete declaration.
7497 * event-top.c (handle_sigint): Call mark_async_signal_handler
7498 instead of gdb_call_async_signal_handler.
7499 * exceptions.c (prepare_to_throw_exception): Remove reference to
7501 (exception_fprintf): Remove comments about immediate_quit.
7502 * mingw-hdep.c (sigint_event, sigint_handler): Delete.
7503 (gdb_select): Don't wait on sigint_event.
7504 (gdb_call_async_signal_handler): Delete.
7505 (_initialize_mingw_hdep): Delete.
7506 * posix-hdep.c (gdb_call_async_signal_handler): Delete.
7507 * utils.c (immediate_quit): Delete.
7509 2016-04-12 Pedro Alves <palves@redhat.com>
7511 * defs.h (quit_handler_ftype, quit_handler)
7512 (make_cleanup_override_quit_handler, default_quit_handler): New.
7513 (QUIT): Adjust comments.
7514 * event-top.c (default_quit_handler): New function.
7515 (quit_handler): New global.
7516 (struct quit_handler_cleanup_data): New.
7517 (restore_quit_handler, restore_quit_handler_dtor)
7518 (make_cleanup_override_quit_handler): New.
7519 (async_request_quit): Call QUIT.
7520 * remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
7521 (async_sigint_remote_twice_token, async_sigint_remote_token):
7523 (remote_close): Update comments.
7524 (remote_start_remote): Don't set immediate_quit. Set starting_up
7526 (remote_serial_quit_handler, remote_unpush_and_throw): New
7528 (remote_open_1): Clear got_ctrlc_during_io. Set
7529 remote_async_terminal_ours_p unconditionally.
7530 (async_initialize_sigint_signal_handler)
7531 (async_handle_remote_sigint, async_handle_remote_sigint_twice)
7532 (remote_check_pending_interrupt, async_remote_interrupt)
7533 (async_remote_interrupt_twice)
7534 (async_cleanup_sigint_signal_handler, ofunc)
7535 (sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
7536 (remote_terminal_inferior, remote_terminal_ours): Remove async
7538 (remote_wait_as): Don't install a SIGINT handler in sync mode.
7539 (readchar, remote_serial_write): Override the quit handler with
7540 remote_serial_quit_handler.
7541 (getpkt_or_notif_sane_1): Don't call QUIT.
7542 (initialize_remote_ops): Don't install
7543 remote_check_pending_interrupt.
7544 (_initialize_remote): Don't create async_sigint_remote_token and
7545 async_sigint_remote_twice_token.
7546 * ser-base.c (ser_base_wait_for): Call QUIT and use
7547 interruptible_select.
7548 (ser_base_write): Call QUIT.
7549 * ser-go32.c (dos_readchar, dos_write): Call QUIT.
7550 * ser-unix.c (wait_for): Don't use VTIME. Always take the
7551 gdb_select path, but call QUIT and interruptible_select.
7552 * utils.c (maybe_quit): Call the current quit handler. Don't call
7553 target_check_pending_interrupt.
7554 (defaulted_query, prompt_for_continue): Override the quit handler
7555 with the default quit handler.
7557 2016-04-12 Pedro Alves <palves@redhat.com>
7559 * tui/tui-hooks.c (tui_target_has_run): Delete.
7560 (tui_about_to_proceed): Delete.
7561 (tui_about_to_proceed_observer): Delete.
7562 (tui_install_hooks, tui_remove_hooks): Don't install/remove an
7563 about_to_proceed observer.
7565 2016-04-12 Pedro Alves <palves@redhat.com>
7567 * mi/mi-interp.c (mi_new_thread): Put
7568 target_terminal_ours_for_output in effect while outputting.
7569 (mi_thread_exit): Use target_terminal_ours_for_output instead of
7570 target_terminal_ours.
7571 (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
7572 (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
7573 (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
7574 (mi_breakpoint_created, mi_breakpoint_deleted)
7575 (mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
7576 (mi_command_param_changed, mi_memory_changed)
7577 (report_initial_inferior): Use target_terminal_ours_for_output
7578 instead of target_terminal_ours. Restore terminal settings.
7579 * mi/mi-main.c (mi_execute_command): Use
7580 target_terminal_ours_for_output instead of target_terminal_ours.
7581 Restore terminal settings.
7583 2016-04-12 Pedro Alves <palves@redhat.com>
7586 * gnu-nat.c (inf_validate_task_sc): Don't call
7587 target_terminal_ours / target_terminal_inferior around query.
7588 * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
7589 call target_terminal_ours / target_terminal_inferior around
7591 * linux-record.c (record_linux_system_call): Don't call
7592 target_terminal_ours / target_terminal_inferior around yquery.
7593 * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
7594 / target_terminal_inferior around query.
7595 * record-full.c (record_full_check_insn_num): Remove
7596 'set_terminal' parameter. Don't call target_terminal_ours /
7597 target_terminal_inferior around query.
7598 (record_full_message, record_full_registers_change)
7599 (record_full_xfer_partial): Adjust.
7600 * remote.c (interrupt_query): Don't call target_terminal_ours /
7601 target_terminal_inferior around query.
7602 * utils.c (defaulted_query): Install cleanup to restore target
7603 terminal. Put target_terminal_ours_for_output in effect while
7604 defaulted producing, and target_terminal_ours in in effect while
7606 (prompt_for_continue): Install cleanup to restore target terminal.
7607 Put target_terminal_ours in in effect while handling input.
7609 2016-04-12 Pedro Alves <palves@redhat.com>
7611 * utils.c (defaulted_query, prompt_for_continue): Free temporary
7612 strings with cleanups, instead of xfree.
7614 2016-04-12 Pedro Alves <palves@redhat.com>
7616 * utils.c (vwarning, internal_vproblem): Use
7617 make_cleanup_restore_target_terminal and
7618 target_terminal_ours_for_output.
7620 2016-04-12 Pedro Alves <palves@redhat.com>
7622 * infcmd.c (post_create_inferior, prepare_one_step): Use
7623 target_terminal_ours_for_output instead of target_terminal_ours.
7625 2016-04-12 Pedro Alves <palves@redhat.com>
7627 * exceptions.c (print_flush): Use target_terminal_ours_for_output
7628 instead of target_terminal_ours, and restore target terminal with
7631 2016-04-12 Pedro Alves <palves@redhat.com>
7633 * cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
7634 instead of target_terminal_ours, and restore target terminal with
7637 2016-04-12 Pedro Alves <palves@redhat.com>
7639 * ada-lang.c (type_as_string, type_as_string_and_cleanup): New
7641 (ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.
7643 2016-04-12 Pedro Alves <palves@redhat.com>
7645 * ser-base.c (fd_event): Retry read_prim on EINTR.
7646 (do_ser_base_readchar): Retry read_prim on EINTR.
7647 (ser_base_write): Retry write_prim on EINTR.
7648 * ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
7649 (ser_unix_write_prim): Remove comment.
7651 2016-04-12 Pedro Alves <palves@redhat.com>
7653 * remote.c (remote_pass_ctrlc): New function.
7654 (init_remote_ops): Install it.
7655 * target.c (target_terminal_inferior): Pass pending Ctrl-C to the
7657 (target_pass_ctrlc, default_target_pass_ctrlc): New functions.
7658 * target.h (struct target_ops) <to_pass_ctrlc>: New method.
7659 (target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
7660 * target-delegates.c: Regenerate.
7662 2016-04-12 Pedro Alves <palves@redhat.com>
7664 * infcmd.c (interrupt_target_1): Call target_stop is in non-stop
7666 * linux-nat.c (linux_nat_interrupt): Delete.
7667 (linux_nat_add_target): Don't install linux_nat_interrupt.
7668 * remote.c (remote_interrupt_ns): Change return type to void.
7669 Throw error if interrupting the target is not supported.
7670 (remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.
7672 2016-04-12 Pedro Alves <palves@redhat.com>
7674 * defs.h (clear_quit_flag): Remove declaration.
7675 * extension-priv.h (struct extension_language_ops)
7676 <clear_quit_flag>: Remove field and update comments.
7677 * extension.c (clear_quit_flag): Delete.
7678 * guile/guile.c (guile_extension_ops): Adjust.
7679 * python/python.c (python_extension_ops): Adjust.
7680 (gdbpy_clear_quit_flag): Delete.
7682 2016-04-12 Pedro Alves <palves@redhat.com>
7684 * main.c (captured_main): Don't clear the quit flag.
7686 2016-04-12 Pedro Alves <palves@redhat.com>
7688 * exceptions.c (prepare_to_throw_exception): Don't clear the quit
7691 2016-04-12 Pedro Alves <palves@redhat.com>
7693 * event-top.c (command_handler): Don't call clear_quit_flag.
7695 2016-04-12 Pedro Alves <palves@redhat.com>
7697 * remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
7698 * remote.c (remote_wait_as): Don't call clear_quit_flag.
7700 2016-04-12 Pedro Alves <palves@redhat.com>
7702 * python/python.c: Include "ser-event.h".
7703 (gdbpy_event_fds): Delete.
7704 (gdbpy_serial_event): New.
7705 (gdbpy_run_events): Change prototype. Use serial_event_clear
7706 instead of serial_readchar.
7707 (gdbpy_post_event): Use serial_event_set instead of serial_write.
7708 (gdbpy_initialize_events): Use make_serial_event instead of
7711 2016-04-12 Pedro Alves <palves@redhat.com>
7713 * defs.h: Extend QUIT-related comments to mention
7714 interruptible_select.
7715 (quit_serial_event_set, quit_serial_event_clear): Declare.
7716 * event-top.c: Include "ser-event.h" and "gdb_select.h".
7717 (quit_serial_event): New global.
7718 (async_init_signals): Make quit_serial_event.
7719 (quit_serial_event_set, quit_serial_event_clear)
7720 (quit_serial_event_fd, interruptible_select): New functions.
7721 * extension.c (set_quit_flag): Set the quit serial event.
7722 (check_quit_flag): Clear the quit serial event.
7723 * gdb_select.h (interruptible_select): New declaration.
7724 * guile/scm-ports.c (ioscm_input_waiting): Use
7725 interruptible_select instead of gdb_select.
7726 * top.c (gdb_readline_no_editing): Likewise.
7727 * ui-file.c (stdio_file_read): Likewise.
7729 2016-04-12 Pedro Alves <palves@redhat.com>
7731 * event-loop.c: Include "ser-event.h".
7732 (async_signal_handlers_serial_event): New global.
7733 (async_signals_handler, initialize_async_signal_handlers): New
7735 (mark_async_signal_handler): Set
7736 async_signal_handlers_serial_event.
7737 (invoke_async_signal_handlers): Clear
7738 async_signal_handlers_serial_event.
7739 * event-top.c (async_init_signals): Call
7740 initialize_async_signal_handlers.
7742 2016-04-12 Pedro Alves <palves@redhat.com>
7744 * Makefile.in (SFILES): Add ser-event.c.
7745 (HFILES_NO_SRCDIR): Add ser-event.h.
7746 (COMMON_OBS): Add ser-event.o.
7747 * ser-event.c, ser-event.h: New files.
7748 * serial.c (new_serial): New function, factored out from
7749 (serial_fdopen_ops): ... this.
7750 (serial_open_ops_1): New function, factored out from
7751 (serial_open): ... this.
7752 (serial_open_ops): New function.
7753 * serial.h (struct serial): Forware declare.
7754 (serial_open_ops): New declaration.
7756 2016-04-12 Pedro Alves <palves@redhat.com>
7758 * serial.c (serial_open, serial_fdopen_ops, do_serial_close):
7759 Remove references to name.
7760 * serial.h (struct serial) <name>: Delete.
7762 2016-04-12 Pedro Alves <palves@redhat.com>
7764 * remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
7766 (async_remote_fileio_interrupt): Delete.
7767 (remote_fileio_ctrl_c_signal_handler): Don't call the async signal
7768 handler. Instead just always set the ctrl_c flag.
7769 (remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
7770 re-enabling the SIGINT handler.
7771 (remote_fileio_func_open, remote_fileio_func_close)
7772 (remote_fileio_func_read, remote_fileio_func_write)
7773 (remote_fileio_func_lseek, remote_fileio_func_rename)
7774 (remote_fileio_func_unlink, remote_fileio_func_stat)
7775 (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
7776 (remote_fileio_func_isatty, remote_fileio_func_system)
7777 (remote_fileio_request): Remove references to
7778 remote_fio_no_longjmp.
7779 (initialize_remote_fileio): Don't create an async signal handler.
7781 2016-04-12 Pedro Alves <palves@redhat.com>
7783 * event-top.c (stdin_event_handler): Call QUIT;
7784 (prompt_for_continue): Don't run with immediate_quit set.
7786 2016-04-12 Pedro Alves <palves@redhat.com>
7788 * tui/tui-io.c (tui_redisplay_readline): Check
7789 gdb_in_secondary_prompt_p instead of immediate_quit.
7790 * tui/tui.c: Include top.h.
7791 (tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
7794 2016-04-12 Pedro Alves <palves@redhat.com>
7796 * top.c (read_command_file): Inline command_loop here.
7797 (command_loop): Delete.
7799 2016-04-12 Pedro Alves <palves@redhat.com>
7801 * top.c: Include "gdb_select.h".
7802 (gdb_readline_no_editing): Wait for input with gdb_select instead
7803 of blocking in fgetc.
7804 (command_line_input): Don't set immediate_quit.
7806 2016-04-08 Martin Galvan <martin.galvan@tallertechnologies.com>
7808 * value.c (value_next): Make pass-by-reference parameters const-correct.
7809 (value_parent): Likewise.
7810 (value_enclosing_type): Likewise.
7811 (value_lazy): Likewise.
7812 (value_stack): Likewise.
7813 (value_embedded_offset): Likewise.
7814 (value_pointed_to_offset): Likewise.
7815 (value_raw_address): Likewise.
7816 (deprecated_value_modifiable): Likewise.
7817 (value_free_to_mark): Likewise.
7818 (value_release_to_mark): Likewise.
7819 (internalvar_name): Likewise.
7820 (readjust_indirect_value_type): Likewise.
7821 (value_initialized): Likewise.
7822 * value.h (value_next): Likewise.
7823 (value_parent): Likewise.
7824 (value_enclosing_type): Likewise.
7825 (value_lazy): Likewise.
7826 (value_stack): Likewise.
7827 (value_embedded_offset): Likewise.
7828 (value_pointed_to_offset): Likewise.
7829 (value_raw_address): Likewise.
7830 (deprecated_value_modifiable): Likewise.
7831 (value_free_to_mark): Likewise.
7832 (value_release_to_mark): Likewise.
7833 (internalvar_name): Likewise.
7834 (readjust_indirect_value_type): Likewise.
7835 (value_initialized): Likewise.
7837 2016-04-07 Yao Qi <yao.qi@linaro.org>
7839 * record-full.c (record_full_insert_breakpoint): Return
7840 early if entry on the address is found in
7841 record_full_breakpoints.
7843 2016-04-07 Yao Qi <yao.qi@linaro.org>
7845 * record-full.c (record_full_insert_breakpoint): Set
7846 bp_tgt->reqstd_address and bp_tgt->placed_size.
7848 2016-04-06 Don Breazeal <donb@codesourcery.com>
7850 * value.c (value_actual_type): Don't try to get rtti type
7851 of the value if it has been optimized out.
7852 (value_optimized_out): If a memory access error occurs,
7853 just check vaue->optimized_out.
7855 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
7857 Revert the previous commit adding unknown_v_replies_ok.
7859 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
7861 * remote.c (struct remote_state): New field unknown_v_replies_ok.
7862 (packet_config_support): Read it.
7863 (remote_start_remote): Set it.
7865 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
7867 * remote.c: Revert check-in by a mistake in the previous commit.
7869 2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
7870 Pedro Alves <palves@redhat.com>
7872 * exec.c (exec_file_locate_attach): Print warning for unsupported
7873 target_pid_to_exec_file.
7874 * symfile-mem.c (add_vsyscall_page): Remove the "file" command
7877 2016-04-04 Simon Marchi <simon.marchi@ericsson.com>
7879 * cli/cli-decode.c (help_cmd_list): Fix function doc and remove
7882 2016-04-01 Artemiy Volkov <artemiyv@acm.org>
7885 * eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
7886 the type of BINOP_REPEAT's second operand.
7888 2016-03-31 Yichao Yu <yyc1992@gmail.com>
7891 * jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
7892 got the breakpoint at the right address.
7893 (jit_inferior_created): New function.
7894 (_initialize_jit): Install jit_inferior_created as
7895 inferior_created observer.
7897 2016-03-31 Marcin Kościelnicki <koriakin@0x04.net>
7899 * NEWS: Mention support for tracepoints on powerpc*-linux.
7901 2016-03-31 Catalin Udma <catalin.udma@freescale.com>
7904 * python/python.c (execute_gdb_command): Use console uiout
7905 when executing gdb command.
7906 * utils.c (restore_ui_out_closure): New structure.
7907 (do_restore_ui_out): New function.
7908 (make_cleanup_restore_ui_out): Likewise.
7909 * utils.h (make_cleanup_restore_ui_out): Declare.
7911 2016-03-31 Pedro Alves <palves@redhat.com>
7913 * NEWS: Mention that support for "target m32rsdi", "target mips",
7914 "target pmon", "target ddb", "target rockhopper", and "target lsi"
7916 * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
7918 (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
7919 * configure.tgt: Remove all references to remote-m32r-sdi.o and
7921 * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
7923 * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
7925 * remote-m32r-sdi.c, remote-mips.c: Delete files.
7926 * symfile.c (generic_load, generic_load): Remove comments.
7928 2016-03-30 Yao Qi <yao.qi@linaro.org>
7930 * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
7933 2016-03-30 Yao Qi <yao.qi@linaro.org>
7935 * arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
7936 (arm_epilogue_frame_this_id): New function.
7937 (arm_epilogue_frame_prev_register): New function.
7938 (arm_epilogue_frame_sniffer): New function.
7939 (arm_epilogue_frame_unwind): New.
7940 (arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.
7942 2016-03-30 Yao Qi <yao.qi@linaro.org>
7944 * arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
7945 (arm_stack_frame_destroyed_p_1): ... here. Don't call
7947 (arm_stack_frame_destroyed_p): Call
7948 thumb_stack_frame_destroyed_p and
7949 arm_stack_frame_destroyed_p_1.
7951 2016-03-30 Doug Evans <dje@google.com>
7953 * python/py-utils.c (host_string_to_python_string): New function.
7954 * python/python-internal.h (host_string_to_python_string): Declare it.
7955 * python/py-*.c (*): Update all calls to
7956 PyString_Decode (str, strlen (str), host_charset (), NULL);
7957 to use host_string_to_python_string instead.
7959 2016-03-30 Marcin Kościelnicki <koriakin@0x04.net>
7961 * remote.c (remote_check_symbols): Allocate own buffer for reply.
7963 2016-03-29 Max Filippov <jcmvbkbc@gmail.com>
7965 * xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
7966 Use safe_read_memory_integer instead of read_memory_integer.
7968 2016-03-29 Marcin Kościelnicki <koriakin@0x04.net>
7970 * NEWS: Mention support for tracepoints on s390*-linux.
7972 2016-03-29 Don Breazeal <donb@codesourcery.com>
7974 * gdb/value.c (value_actual_type): Fix formatting issue.
7976 2016-03-23 Yao Qi <yao.qi@linaro.org>
7978 * gdbarch.sh (software_single_step): Remove comments.
7979 * gdbarch.h: Regenerated.
7981 2016-03-21 Yao Qi <yao.qi@linaro.org>
7983 * arm-tdep.c (arm_record_media): New.
7984 (arm_record_ld_st_reg_offset): Call arm_record_media.
7986 2016-03-21 Yao Qi <yao.qi@linaro.org>
7988 * arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
7991 2016-03-18 Yao Qi <yao.qi@linaro.org>
7993 * sparc-tdep.c (sparc_software_single_step): Make it static.
7994 * sparc-tdep.h (sparc_software_single_step): Remove declaration.
7996 2016-03-18 Yao Qi <yao.qi@linaro.org>
7998 * spu-tdep.c (spu_software_single_step): Throw error when
7999 target_read_memory fails.
8001 2016-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
8003 * linux-thread-db.c (check_pid_namespace_match): Extend the message.
8005 2016-03-17 Pedro Alves <palves@redhat.com>
8006 Don Breazeal <donb@codesourcery.com>
8009 * infcmd.c (notice_new_inferior): Use the 'leave_running' argument
8010 instead of checking the 'non_stop' global.
8011 * remote.c (remote_add_thread): New parameter 'executing'. Use it
8012 to set the new thread's executing state.
8013 (remote_notice_new_inferior): Rename parameter 'running' to
8014 'executing'. Always set the thread state to THREAD_RUNNING in
8015 non-stop mode, and to THREAD_STOPPED in all-stop mode. Pass
8016 EXECUTING to remote_add_thread and notice_new_inferior.
8017 (remote_update_thread_list): Update to pass executing state, not
8020 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
8022 * syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
8024 * syscalls/s390x-linux.xml: Likewise.
8026 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
8028 * linux-record.c (record_mem_at_reg): New helper function.
8029 (record_linux_system_call): Exploit new helper function where
8032 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
8034 * linux-record.c: Fix whitespace issues; tabify, remove trailing
8037 2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
8039 * linux-record.c (record_linux_system_call): Add missing return
8040 statements to handling of pipe and pipe2 syscalls.
8042 2016-03-16 Doug Evans <dje@google.com>
8044 * xml-tdesc.c (tdesc_start_enum): Fix c++ build.
8046 2016-03-16 Yao Qi <yao.qi@linaro.org>
8048 * arm-linux-tdep.c (arm_linux_init_abi): Fix
8049 arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
8050 arm_linux_record_tdep.arg3. Set arm_linux_record_tdep.arg4,
8051 arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
8052 arm_linux_record_tdep.arg7.
8054 2016-03-15 Keith Seitz <keiths@redhat.com>
8056 PR breakpoints/18303
8057 * cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
8058 look for "::" instead of simply ":".
8059 (cp_search_static_and_baseclasses): Return null_block_symbol for
8062 * cp-support.c (cp_find_first_component_aux): Do not return
8063 a prefix length for ':' unless the next character is also ':'.
8065 2016-03-15 Doug Evans <dje@google.com>
8067 * features/aarch64-core.xml (cpsr_flags): New flags type.
8069 * features/aarch64.c: Regenerate.
8071 2016-03-15 Doug Evans <dje@google.com>
8073 * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
8074 * features/i386/32bit-sse.xml (i386_eflags): Ditto.
8075 * features/i386/64bit-core.xml (i386_eflags): Ditto.
8076 * features/i386/64bit-sse.xml (i386_eflags): Ditto.
8077 * features/i386/x32-core.xml (i386_eflags): Ditto.
8079 2016-03-15 Doug Evans <dje@google.com>
8080 Wei-cheng Wang <cole945@gmail.com>
8082 Extend flags to support multibit and enum bitfields.
8083 * NEWS: Document new features.
8084 * c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
8085 (c_type_print_varspec_suffix, c_type_print_base): Ditto.
8086 * gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
8087 (append_flags_type_field): New function.
8088 (append_flags_type_flag): Call it.
8089 * gdbtypes.h (append_flags_type_field): Declare.
8090 * target-descriptions.c (struct tdesc_type_flag): Delete.
8091 (enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
8092 (enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
8093 (struct tdesc_type) <u.f>: Delete.
8094 (tdesc_predefined_types): Add "bool".
8095 (tdesc_predefined_type): New function.
8096 (tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
8097 Update TDESC_TYPE_FLAGS support.
8098 (tdesc_free_type): Handle TDESC_TYPE_ENUM. Update TDESC_TYPE_FLAGS.
8099 (tdesc_create_flags): Update.
8100 (tdesc_create_enum): New function.
8101 (tdesc_add_field): Initialize start,end to -1.
8102 (tdesc_add_typed_bitfield): New function.
8103 (tdesc_add_bitfield): Call it.
8104 (tdesc_add_flag): Allow TDESC_TYPE_STRUCT. Update.
8105 (tdesc_add_enum_value): New function.
8106 (maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
8107 TDESC_TYPE_STRUCT. Handle TDESC_TYPE_ENUM.
8108 * target-descriptions.h (tdesc_create_enum): Declare.
8109 (tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
8110 * valprint.c (generic_val_print_enum_1): New function.
8111 (generic_val_print_enum): Call it.
8112 (val_print_type_code_flags): Make static. Handle multibit bitfields
8114 * valprint.h (val_print_type_code_flags): Delete.
8115 * xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
8116 Delete. All uses removed.
8117 (tdesc_start_enum): New function.
8118 (tdesc_start_field): Handle multibit and enum bitfields.
8119 (tdesc_start_enum_value): New function.
8120 (enum_value_attributes, enum_children, enum_attributes): New static
8122 (feature_children): Add "enum".
8123 * features/gdb-target.dtd (enum, evalue): New elements.
8125 2016-03-15 Doug Evans <dje@google.com>
8127 * target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
8128 from LONGEST to int.
8129 (struct tdesc_type) <u.f.size>: Ditto.
8130 (tdesc_set_struct_size): Change type of "size" arg from LONGEST
8131 to int. Add assertion size > 0.
8132 (tdesc_create_flags): Ditto.
8133 * target-descriptions.h (tdesc_set_struct_size): Update.
8134 (tdesc_create_flags): Update.
8135 * xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
8136 (MAX_VECTOR_SIZE): New macro.
8137 (tdesc_start_struct): Catch conversion errors from LONGEST to int.
8138 (tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.
8140 2016-03-15 Doug Evans <dje@google.com>
8142 * target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
8143 TYPE_CODE_FLAGS instead of "field_type", for consistency.
8144 * features/i386/amd64-avx-linux.c: Regenerate.
8145 * features/i386/amd64-avx.c: Regenerate.
8146 * features/i386/amd64-avx512-linux.c: Regenerate.
8147 * features/i386/amd64-avx512.c: Regenerate.
8148 * features/i386/amd64-linux.c: Regenerate.
8149 * features/i386/amd64-mpx-linux.c: Regenerate.
8150 * features/i386/amd64-mpx.c: Regenerate.
8151 * features/i386/amd64.c: Regenerate.
8152 * features/i386/i386-avx-linux.c: Regenerate.
8153 * features/i386/i386-avx.c: Regenerate.
8154 * features/i386/i386-avx512-linux.c: Regenerate.
8155 * features/i386/i386-avx512.c: Regenerate.
8156 * features/i386/i386-linux.c: Regenerate.
8157 * features/i386/i386-mmx-linux.c: Regenerate.
8158 * features/i386/i386-mmx.c: Regenerate.
8159 * features/i386/i386-mpx-linux.c: Regenerate.
8160 * features/i386/i386-mpx.c: Regenerate.
8161 * features/i386/i386.c: Regenerate.
8162 * features/i386/x32-avx-linux.c: Regenerate.
8163 * features/i386/x32-avx.c: Regenerate.
8164 * features/i386/x32-avx512-linux.c: Regenerate.
8165 * features/i386/x32-avx512.c: Regenerate.
8166 * features/i386/x32-linux.c: Regenerate.
8167 * features/i386/x32.c: Regenerate.
8169 2016-03-15 Pedro Alves <palves@redhat.com>
8172 * linux-thread-db.c (try_thread_db_load_1): Leave
8173 info->td_ta_thr_iter_p NULL iff debugging a live process and we
8175 (find_new_threads_once): Assert that we have a non-NULL
8176 info->td_ta_thr_iter_p instead of checking whether the target has
8179 2016-03-15 Pedro Alves <palves@redhat.com>
8182 * infrun.c (displaced_step_prepare): Also disable displaced
8183 stepping on NOT_SUPPORTED_ERROR.
8184 * linux-tdep.c (linux_displaced_step_location): If reading auxv
8185 fails, throw NOT_SUPPORTED_ERROR instead of generic error.
8187 2016-03-13 Marcin Kościelnicki <koriakin@0x04.net>
8189 * s390-linux-tdep.c (s390_gen_return_address): New function.
8190 (s390_gdbarch_init): Fill gen_return_address hook.
8192 2016-03-11 Andrew Burgess <andrew.burgess@embecosm.com>
8194 * symmisc.c (maintenance_info_line_tables): New function.
8195 (maintenance_print_one_line_table): New function.
8196 (_initialize_symmisc): Register 'maint info line-table' command.
8197 * NEWS: Mention new command.
8199 2016-03-11 Marcin Kościelnicki <koriakin@0x04.net>
8201 * s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
8202 (s390_ax_pseudo_register_push_stack): New function.
8203 (s390_gdbarch_init): Fill ax_pseudo_register_collect and
8204 ax_pseudo_register_push_stack hooks.
8206 2016-03-10 Simon Marchi <simon.marchi@polymtl.ca>
8208 * data-directory/Makefile.in (PYTHON_FILE_LIST): Install
8209 gdb/function/as_string.py.
8210 * python/lib/gdb/function/as_string.py: New file.
8211 * NEWS: Mention the new $_as_string function.
8213 2016-03-09 Jose E. Marchesi <jose.marchesi@oracle.com>
8215 * target.h: Fix doc string of target_can_use_hardware_watchpoint.
8217 2016-03-09 Pedro Alves <palves@redhat.com>
8219 * event-top.c (more_to_come): Delete.
8220 (struct readline_input_state): Delete.
8221 (readline_input_state): Delete.
8222 (get_command_line_buffer): New function.
8223 (command_handler): Update comments. Don't handle NULL commands
8224 here. Do not execute commented lines.
8225 (command_line_append_input_line): New function.
8226 (handle_line_of_input): New function, partly based on
8227 command_line_handler and command_line_input.
8228 (command_line_handler): Rewrite.
8229 * event-top.h (command_handler): New declaration.
8230 (command_loop): Defer command execution to command_handler.
8231 (command_line_input): Update comments. Simplify, using struct
8232 buffer and handle_line_of_input.
8233 * top.h (struct buffer): New forward declaration.
8234 (handle_line_of_input): New declaration.
8236 2016-03-09 Pedro Alves <palves@redhat.com>
8238 * event-top.c (command_line_handler): Use xfree + xstrdup instead
8239 of xrealloc + strcpy.
8240 * main.c (captured_main): Use xstrdup instead of xmalloc plus
8242 * top.c (saved_command_line): Rewrite comment.
8243 (saved_command_line_size): Delete.
8244 (command_line_input): Use xfree + xstrdup instead of xrealloc +
8246 * top.h (saved_command_line_size): Delete declaration.
8248 2016-03-09 Pedro Alves <palves@redhat.com>
8250 * event-top.c: Include buffer.h.
8251 (gdb_readline_no_editing_callback): Use struct buffer instead
8254 2016-03-09 Pedro Alves <palves@redhat.com>
8256 * common/buffer.h (buffer_grow_char): New function.
8257 * top.c: Include buffer.h.
8258 (gdb_readline_no_editing): Rename 'prompt_arg' parameter to
8259 'prompt'. Use struct buffer instead of xrealloc.
8261 2016-03-09 Pedro Alves <palves@redhat.com>
8263 * defs.h (gdb_readline): Delete declaration.
8264 * top.c (gdb_readline): Rename to ...
8265 (gdb_readline_no_editing): ... this, and make static.
8267 2016-03-09 Pedro Alves <palves@redhat.com>
8269 * utils.c (prompt_for_continue): Update comments.
8271 2016-03-09 Pedro Alves <palves@redhat.com>
8273 * event-top.c (async_annotation_suffix): Delete.
8274 (top_level_prompt, command_line_handler): Don't use
8275 'async_annotation_suffix' and simplify.
8276 * event-top.h (async_annotation_suffix): Delete declaration.
8277 (init_main): Remove reference to 'async_annotation_suffix'.
8279 2016-03-09 Pedro Alves <palves@redhat.com>
8281 * event-top.c (gdb_readline2): Rename to ...
8282 (gdb_readline_no_editing_callback): ... this.
8283 (change_line_handler, stdin_event_handler)
8284 (gdb_setup_readline): Adjust.
8285 * event-top.h (gdb_readline2): Rename to ...
8286 (gdb_readline_no_editing_callback): ... this, and move closer to
8287 other readline-related declarations.
8288 * mi/mi-interp.c (mi_interpreter_resume): Adjust.
8290 2016-03-09 Pedro Alves <palves@redhat.com>
8292 * top.c (window_hook): Delete.
8293 (command_loop): Remove references to window_hook.
8295 2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
8297 * corefile.c (safe_read_memory_unsigned_integer): New function.
8298 * gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
8299 * rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
8301 2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
8303 * rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
8304 (rs6000_gen_return_address): New function.
8305 (rs6000_gdbarch_init): Wire in the above.
8307 2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
8309 * rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
8310 (rs6000_gdbarch_init): Wire in the above.
8312 2016-03-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
8314 * s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
8315 instructions that do nothing or are conditional traps.
8317 2016-03-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
8319 * s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
8320 frame func's PC in info->func before any other failure can occur.
8321 (s390_frame_this_id): Use frame_id_build_unavailable_stack if
8322 info->func has been filled out.
8324 2016-03-09 Pedro Alves <palves@redhat.com>
8326 * osabi.c (gdb_osabi_names): Avoid spaces in osabi names.
8328 2016-03-09 Pedro Alves <palves@redhat.com>
8330 * frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.
8332 2016-03-09 Pedro Alves <palves@redhat.com>
8334 * cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
8335 order is BFD_ENDIAN_BIG or if the cris version is unsupported.
8337 2016-03-09 Pedro Alves <palves@redhat.com>
8339 * doublest.c: Extend comments.
8340 (floatformat_to_doublest, floatformat_from_doublest): Copy the
8341 floatformat's total size, not the host type's size.
8343 2016-03-09 Pedro Alves <palves@redhat.com>
8345 * doublest.c (floatformat_totalsize_bytes): New function.
8346 (floatformat_from_type): Assert that the type's length is at least
8347 as long as the floatformat's totalsize.
8348 * doublest.h (floatformat_totalsize_bytes): New declaration.
8349 * gdbtypes.c (arch_float_type): Assert that the type's length is
8350 at least as long as the floatformat's totalsize.
8352 2016-03-09 Pedro Alves <palves@redhat.com>
8354 * hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
8355 format to floatformats_ieee_double.
8357 2016-03-07 Pedro Alves <palves@redhat.com>
8359 * mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
8360 before calling bfd_get_flavour.
8362 2016-03-05 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
8364 * avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
8365 (avr_push_dummy_call): Correct last needed argument register.
8366 Write MSB of argument into register and subsequent bytes into
8367 other registers in decreasing order.
8369 2016-03-04 Yao Qi <yao.qi@linaro.org>
8371 * arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
8372 condition check. Record the right D register number.
8374 2016-03-04 Yao Qi <yao.qi@linaro.org>
8376 * arm-tdep.c (arm_record_extension_space): Remove code
8377 printing "Process record does not support".
8378 (arm_record_data_proc_misc_ld_str): Likewise.
8379 (decode_insn): Call arm_record_extension_space if condition
8380 is 0xf. Call arm_record_unsupported_insn if ret isn't
8381 ARM_RECORD_SUCCESS. Use 'ret' instead of 'insn_id' to hold
8382 the value of thumb2_record_decode_insn_handler.
8384 2016-03-04 Simon Marchi <simon.marchi@ericsson.com>
8386 * features/feature_to_c.sh: Print the help when passing no
8389 2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
8391 * MAINTAINERS (Write After Approval): Add Bernhard Heckel.
8393 2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
8395 * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.
8397 2016-03-01 Andreas Arnez <arnez@linux.vnet.ibm.com>
8399 * s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
8400 exception when attempting to access the inferior's backchain.
8402 2016-02-29 Yao Qi <yao.qi@linaro.org>
8404 * aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
8405 eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
8406 Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
8407 for aarch64_sys_epoll_create1.
8409 2016-02-29 Yao Qi <yao.qi@linaro.org>
8411 * linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
8412 <gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
8413 <gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
8414 * linux-record.c (record_linux_system_call): Handle them.
8416 2016-02-28 Iain Buclaw <ibuclaw@gdcproject.org>
8418 * d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
8421 2016-02-26 Keith Seitz <keiths@redhat.com>
8423 * rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
8424 to avoid invalid conversion from void *.
8426 2016-02-26 Yao Qi <yao.qi@linaro.org>
8428 * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
8429 per bit 8. Check bit 20 instead of bit 4 for VMOV
8430 instruction. Record D registers for instructions changing
8431 S registers. Change of the order of length and address
8432 in record_buf_mem array.
8434 2016-02-26 Yao Qi <yao.qi@linaro.org>
8436 * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
8439 2016-02-25 Doug Evans <dje@google.com>
8441 * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
8443 (recv_long_data): Ditto.
8445 2016-02-25 Simon Marchi <simon.marchi@ericsson.com>
8447 * i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
8448 Initialize variables.
8450 2016-02-25 Antoine Tremblay <antoine.tremblay@ericsson.com>
8452 * ax-general.c (ax_reg): Call gdbarch_remote_register_number.
8453 (ax_reg_mask): Likewise.
8455 2016-02-24 Pedro Alves <palves@redhat.com>
8457 * linux-nat.c (save_sigtrap) Delete.
8458 (stop_wait_callback): Call save_stop_reason instead of
8460 (check_stopped_by_breakpoint): Rename to ...
8461 (save_stop_reason): ... this. Bits of save_sigtrap folded here.
8462 Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
8463 GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
8464 common code between the USE_SIGTRAP_SIGINFO and
8465 !USE_SIGTRAP_SIGINFO blocks.
8466 (linux_nat_filter_event): Call save_stop_reason instead of
8468 * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
8470 * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
8471 comments on MIPS behavior.
8472 (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
8474 2016-02-24 Marcin Kościelnicki <koriakin@0x04.net>
8476 * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
8477 to avoid spurious warnings.
8479 2016-02-24 Gary Benson <gbenson@redhat.com>
8481 * exec.c (exec_file_locate_attach): Do not attempt to
8482 locate main executable locally if not found in sysroot.
8484 2016-02-24 Joel Brobecker <brobecker@adacore.com>
8488 2016-02-24 Wei-cheng Wang <cole945@gmail.com>
8490 * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
8491 unavailable PC/SP to build unavailable frame.
8493 2016-02-23 Doug Evans <dje@google.com>
8495 Extend "skip" command to support -file, -gfile, -function, -rfunction.
8496 * NEWS: Document new features.
8497 * skip.c: #include "fnmatch.h", "gdb_regex.h".
8498 (skiplist_entry) <file>: Renamed from filename.
8499 <function>: Renamed from function_name.
8500 <file_is_glob, function_is_regexp>: New members.
8501 <compiled_function_regexp, compiled_function_regexp_is_valid>:
8503 (make_skip_entry): New function.
8504 (free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
8505 (make_free_skiplist_entry_cleanup): New function.
8506 (skip_file_command): Update.
8507 (skip_function, skip_function_command): Update.
8508 (compile_skip_regexp): New functions.
8509 (skip_command): Add support for new options.
8510 (skip_info): Update.
8511 (skip_file_p, skip_gfile_p): New functions.
8512 (skip_function_p, skip_rfunction_p): New functions.
8513 (function_name_is_marked_for_skip): Update and simplify.
8514 (_initialize_step_skip): Update.
8515 * symtab.c: #include "fnmatch.h".
8516 (compare_glob_filenames_for_search): New function.
8517 * symtab.h (compare_glob_filenames_for_search): Declare.
8518 * utils.c (count_path_elements): New function.
8519 (strip_leading_path_elements): New function.
8520 * utils.h (count_path_elements): Declare.
8521 (strip_leading_path_elements): Declare.
8523 2016-02-23 Simon Marchi <simon.marchi@ericsson.com>
8525 * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
8526 (thumb_process_displaced_insn): Likewise.
8527 (arm_process_displaced_insn): Adjust calls.
8529 2016-02-23 Yao Qi <yao.qi@linaro.org>
8531 * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
8533 <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
8534 <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
8535 <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
8536 <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
8537 <aarch64_sys_linkat, aarch64_sys_renameat>: New.
8538 <aarch64_sys_faccessat>: New.
8539 <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
8540 <aarch64_sys_openat, aarch64_sys_readlinkat>: New.
8541 <aarch64_sys_newfstatat>: New.
8542 (UNSUPPORTED_SYSCALL_MAP): New macro.
8543 (aarch64_canonicalize_syscall): Add missing syscalls.
8545 2016-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
8547 * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
8549 2016-02-22 Yao Qi <yao.qi@linaro.org>
8551 * arm-tdep.c: Fix code format issues.
8553 2016-02-21 Iain Buclaw <ibuclaw@gdcproject.org>
8555 * d-namespace.c (d_lookup_symbol_imports): Remove argument
8556 'search_parents'. All callers updated.
8558 2016-02-18 Marcin Kościelnicki <koriakin@0x04.net>
8560 * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
8561 (s390_gdbarch_init): Fill guess_tracepoint_registers hook.
8563 2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
8565 * NEWS: Add entry for bound violation.
8566 * amd64-linux-tdep.c (amd64_linux_init_abi_common):
8567 Add handler for segmentation fault.
8568 * gdbarch.sh (handle_segmentation_fault): New.
8569 * gdbarch.c: Regenerate.
8570 * gdbarch.h: Regenerate.
8571 * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
8572 (SIG_CODE_BONDARY_FAULT): New define.
8573 (i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
8574 * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
8575 * i386-tdep.c (i386_mpx_enabled): Add as external.
8576 * i386-tdep.c (i386_mpx_enabled): Add as external.
8577 * infrun.c (handle_segmentation_fault): New function.
8578 (print_signal_received_reason): Use handle_segmentation_fault.
8580 2016-02-18 Marcin Kościelnicki <koriakin@0x04.net>
8582 * arch-utils.c (default_guess_tracepoint_registers): New function.
8583 * arch-utils.h (default_guess_tracepoint_registers): New prototype.
8584 * gdbarch.c: Regenerate.
8585 * gdbarch.h: Regenerate.
8586 * gdbarch.sh: Add guess_tracepoint_registers hook.
8587 * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.
8589 2016-02-17 Gary Benson <gbenson@redhat.com>
8591 * exec.c (exec_file_locate_attach): Add missing cleanup.
8593 2016-02-16 Don Breazeal <donb@codesourcery.com>
8596 * remote.c (remove_new_fork_children): Check for pending
8597 fork status in thread_info.suspend.
8599 2016-02-16 Yao Qi <yao.qi@linaro.org>
8601 * arm-linux-tdep.c (arm_linux_software_single_step): Assign
8604 2016-02-16 Yao Qi <yao.qi@linaro.org>
8606 * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
8607 <syscall_next_pc>: Remove argument PC. Callers updated.
8608 * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
8609 Remove argument PC. Get pc from regcache_read_pc.
8610 * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
8613 2016-02-15 Yao Qi <yao.qi@linaro.org>
8615 * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
8617 2016-02-12 Yao Qi <yao.qi@linaro.org>
8619 * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
8620 nextpc according to instruction.
8622 2016-02-12 Yao Qi <yao.qi@linaro.org>
8624 * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
8625 self->ops->fixup if it isn't NULL.
8626 * arch/arm-get-next-pcs.h: Include gdb_vecs.h.
8627 (struct arm_get_next_pcs_ops) <fixup>: New field.
8628 * arch/arm-linux.c: Include common-regcache.h and
8629 arch/arm-get-next-pcs.h.
8630 (arm_linux_get_next_pcs_fixup): New function.
8631 * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
8632 * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
8633 it with arm_linux_get_next_pcs_fixup.
8634 (arm_linux_software_single_step): Move code to
8635 arm_linux_get_next_pcs_fixup.
8636 * arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
8638 2016-02-12 Marcin Kościelnicki <koriakin@0x04.net>
8640 * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
8643 2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
8645 * frame.h (skip_tailcall_frames): Update comment.
8646 * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
8647 if only artificial frames are found. Update comment.
8648 (frame_unwind_caller_id): Handle NULL return.
8649 (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
8650 skip_artificial_frames does not return NULL.
8651 (frame_pop): Add an error if only tailcall frames are found.
8652 * infcmd.c (finish_command): Move skip_tailcall_frames call into
8653 forward-execution case. Add an error if only tailcall frames are
8656 2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
8658 * stack.c (frame_info): Check frame_unwind_caller_id.
8660 2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
8662 * frame.h (skip_tailcall_frames): New.
8663 * frame.c (skip_tailcall_frames): New.
8664 (frame_pop): Call skip_tailcall_frames.
8665 * infcmd.c (finish_command): Call skip_tailcall_frames.
8667 2016-02-11 Pedro Alves <palves@redhat.com>
8669 * Makefile.in (check-parallel): New rule.
8671 2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
8673 * arm-tdep.c (arm_skip_prologue): Remove unused variables.
8674 (arm_analyze_prologue): Likewise.
8675 (arm_scan_prologue): Likewise.
8676 (arm_m_exception_prev_register): Likewise.
8677 (arm_copy_block_xfer): Likewise.
8678 (thumb2_copy_block_xfer): Likewise.
8679 (arm_decode_miscellaneous): Likewise.
8680 (arm_decode_ld_st_word_ubyte): Likewise.
8681 (arm_decode_svc_copro): Likewise.
8682 (thumb2_decode_svc_copro): Likewise.
8683 (thumb_copy_16bit_ldr_literal): Likewise.
8684 (thumb_copy_pop_pc_16bit): Likewise.
8685 (decode_thumb_32bit_ld_mem_hints): Likewise.
8686 (arm_show_force_mode): Likewise.
8687 (_initialize_arm_tdep): Likewise.
8688 (arm_record_strx): Likewise.
8689 (arm_record_extension_space): Likewise.
8690 (arm_record_data_proc_misc_ld_str): Likewise.
8691 (arm_record_exreg_ld_st_insn): Likewise.
8692 (arm_record_vfp_data_proc_insn): Likewise.
8693 (arm_record_coproc_data_proc): Likewise.
8694 (thumb_record_misc): Likewise.
8695 (thumb_record_ldm_stm_swi): Likewise.
8696 (thumb2_record_ld_st_dual_ex_tbb): Likewise.
8697 (thumb2_record_ld_mem_hints): Likewise.
8698 (thumb2_record_lmul_lmla_div): Likewise.
8699 (thumb2_record_asimd_struct_ld_st): Likewise.
8700 (arm_process_record): Likewise.
8702 2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
8704 * arm-tdep.c (arm_displaced_step_copy_insn): Remove.
8705 (ARM displaced stepping support): Remove reference to
8706 arm_displaced_step_copy_insn in comment.
8707 * arm-tdep.h (arm_displaced_step_copy_insn): Remove.
8708 * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
8709 reference to arm_displaced_step_copy_insn in comment.
8711 2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
8713 * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
8714 (thumb_copy_b): Likewise.
8715 (arm_decode_b_bl_ldmstm): Likewise.
8716 (thumb_copy_16bit_ldr_literal): Likewise.
8717 (thumb_copy_pop_pc_16bit): Likewise.
8719 2016-02-11 Antoine Tremblay <antoine.tremblay@ericsson.com>
8721 * tracepoint.c (encode_actions_1): Use target_gdbarch () rather
8724 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
8726 * tracefile-tfile.c (trace_tdesc): New static variable.
8727 (tfile_open): Clear trace_tdesc, call target_find_description.
8728 (tfile_interp_line): Recognize tdesc lines.
8729 (tfile_close): Clear trace_tdesc.
8730 (tfile_xfer_partial_features): New function.
8731 (tfile_xfer_partial): Call tfile_xfer_partial_features.
8732 (tfile_append_tdesc_line): New function.
8734 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
8736 * ctf.c (ctf_write_tdesc): New function.
8737 (ctf_write_ops): Wire in ctf_write_tdesc.
8738 * tracefile-tfile.c (tfile_write_tdesc): New function.
8739 (tfile_write_ops): Wire in tfile_write_tdesc.
8740 * tracefile.c (trace_save): Call write_tdesc method.
8741 * tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
8742 * xml-tdesc.c (target_fetch_description_xml): New function.
8743 * xml-tdesc.h: Add target_fetch_description_xml prototype.
8745 2016-02-10 Simon Marchi <simon.marchi@ericsson.com>
8747 * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
8748 (arm_decode_dp_misc): Likewise.
8750 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
8752 * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
8753 (amd64_init_abi): Fill ax_pseudo_register_collect hook.
8754 * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
8756 (i386_pseudo_register_write): Ditto.
8757 (i386_ax_pseudo_register_collect): New function.
8758 (i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
8759 * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.
8761 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
8763 * tracefile-tfile.c (tfile_fetch_registers): Use g packet order
8764 instead of gdb order.
8766 2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
8768 * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
8771 2016-02-10 Joel Brobecker <brobecker@adacore.com>
8773 * NEWS: Create a new section for the next release branch.
8774 Rename the section of the current branch, now that it has
8777 2016-02-10 Joel Brobecker <brobecker@adacore.com>
8779 GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
8780 * version.in: Bump version to 7.11.50.DATE-git.
8782 2016-02-09 Keith Seitz <keiths@redhat.com>
8784 PR breakpoints/19546
8785 * breakpoint.c (breakpoint_event_location_empty_p): New function.
8786 (update_breakpoints_after_exec, bkpt_re_set): Use this new function
8787 instead of event_location_empty_p.
8789 2016-02-09 Keith Seitz <keiths@redhat.com>
8791 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
8792 string_to_event_location_basic instead of string_to_event_location.
8794 2016-02-09 Keith Seitz <keiths@redhat.com>
8796 * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
8797 leading whitespace and use string_to_event_location_basic instead
8798 of new_linespec_location.
8800 2016-02-09 Keith Seitz <keiths@redhat.com>
8803 * python/py-breakpoint.c (bppy_init): Use
8804 string_to_event_location_basic instead of new_linespec_location.
8806 2016-02-09 Keith Seitz <keiths@redhat.com>
8808 * location.c (string_to_explicit_location): Note that "-p" is
8809 reserved for probe locations and return NULL for any input
8810 that starts with that.
8811 (string_to_event_location): Move "legacy" linespec code to ...
8812 (string_to_event_location_basic): ... here.
8813 * location.h (string_to_event_location): Update comment.
8814 (string_to_event_location_basic): New function.
8816 2016-02-09 Simon Marchi <simon.marchi@ericsson.com>
8818 * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
8819 to AC_OUTPUT. Remove "exit 0" at the end.
8820 * configure: Regenerate.
8822 2016-02-09 Pedro Alves <palves@redhat.com>
8824 PR breakpoints/19548
8825 * breakpoint.c (create_overlay_event_breakpoint): Don't update
8826 global location list here.
8827 (create_longjmp_master_breakpoint)
8828 (create_std_terminate_master_breakpoint)
8829 (create_exception_master_breakpoint, create_jit_event_breakpoint)
8830 (update_breakpoint_locations):
8831 (breakpoint_re_set): Update global location list after all
8832 breakpoints are re-set.
8834 2016-02-08 Simon Marchi <simon.marchi@ericsson.com>
8836 * remote.c (remote_register_number_and_offset): Remove unused
8838 (remote_thread_always_alive): Likewise.
8839 (remote_update_thread_list): Likewise.
8840 (process_initial_stop_replies): Likewise.
8841 (remote_start_remote): Likewise.
8842 (remote_check_symbols): Likewise.
8843 (discard_pending_stop_replies): Likewise.
8844 (process_stop_reply): Likewise.
8845 (putpkt_binary): Likewise.
8847 (remote_add_target_side_condition): Likewise.
8848 (remote_insert_breakpoint): Likewise.
8849 (remote_supports_stopped_by_sw_breakpoint): Likewise.
8850 (remote_supports_stopped_by_hw_breakpoint): Likewise.
8851 (remote_xfer_partial): Likewise.
8852 (remote_read_btrace): Likewise.
8853 (remote_async_serial_handler): Likewise.
8854 (remote_thread_events): Likewise.
8855 (_initialize_remote): Likewise.
8857 2016-02-07 Simon Marchi <simon.marchi@polymtl.ca>
8859 * varobj.h (varobj_delete): Remove dellist parameter, update and
8860 move documentation here.
8861 * varobj.c (struct cpstack, cppush, cppop): Remove.
8862 (delete_variable): Remove resultp (first) parameter.
8863 (delete_variable_1): Likewise.
8864 (varobj_delete): Remove dellist parameter and unused code.
8865 (update_dynamic_varobj_children): Adjust varobj_delete call.
8866 (update_type_if_necessary): Likewise.
8867 (varobj_set_visualizer): Likewise.
8868 (varobj_update): Likewise.
8869 (value_of_root): Likewise.
8870 (varobj_invalidate_iter): Likewise.
8871 * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.
8873 2016-02-04 Yao Qi <yao.qi@linaro.org>
8875 * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
8876 0 before handling 'F' and set it back afterwards.
8878 2016-02-02 Simon Marchi <simon.marchi@ericsson.com>
8880 * ui-out.c (MAX_UI_OUT_LEVELS): Remove.
8882 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
8884 * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
8886 (compat_siginfo): New bound fields added.
8887 (compat_x32_siginfo): New field added.
8888 (cpt_si_addr_lsb): New define.
8889 (compat_siginfo_from_siginfo): Use nat_siginfo.
8890 (siginfo_from_compat_siginfo): Use nat_siginfo.
8891 (compat_x32_siginfo_from_siginfo): Likewise.
8892 (siginfo_from_compat_x32_siginfo): Likewise.
8894 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
8896 * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
8897 structure to the siginfo if extra_fields contains
8898 LINUX_SIGINFO_FIELD_ADDR_BND.
8900 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
8902 * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
8903 * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
8904 * i386-linux-tdep.h (x86_linux_get_siginfo_type): New
8906 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
8907 x86_linux_get_siginfo_type for the amd64 abi.
8908 * i386-linux-tdep.c (x86_linux_get_siginfo_type): New
8910 (i386_linux_init_abi): Add new function at the i386 ABI
8913 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
8915 * linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
8916 (linux_siginfo_extra_fields): New enum type.
8917 * linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
8918 (linux_get_siginfo_type): Use new function.
8920 2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
8922 * nat/amd64-linux-siginfo.c: New file.
8923 * nat/amd64-linux-siginfo.h: New file.
8924 * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
8925 (amd64-linux-siginfo.o): New rule.
8926 * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
8927 * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
8928 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
8929 (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
8930 (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
8931 (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
8932 (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
8933 (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.
8935 2016-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
8937 * value.c (max_value_size): New variable.
8938 (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
8939 (set_max_value_size): New function.
8940 (show_max_value_size): New function.
8941 (check_type_length_before_alloc): New function.
8942 (allocate_value_contents): Call check_type_length_before_alloc.
8943 (set_value_enclosing_type): Likewise.
8944 (_initialize_values): Add set/show handler for max-value-size.
8945 * NEWS: Mention new set/show command.
8947 2016-01-31 Simon Marchi <simon.marchi@polymtl.ca>
8949 * varobj.h (struct varobj): Fix typos in comments.
8950 (struct lang_varobj_ops): Likewise.
8951 * varobj.c (VAROBJ_TABLE_SIZE): Likewise.
8952 (varobj_create): Move misplaced comment.
8954 2016-01-29 Simon Marchi <simon.marchi@ericsson.com>
8956 * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
8957 to for include additional lines.
8958 * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
8960 2016-01-28 Simon Marchi <simon.marchi@ericsson.com>
8962 * gnulib/import/Makefile.am: Regenerate.
8963 * gnulib/import/Makefile.in: Regenerate.
8964 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
8965 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
8967 2016-01-28 Simon Marchi <simon.marchi@ericsson.com>
8969 * remote.c (skip_to_semicolon): Remove.
8970 (remote_parse_stop_reply): Use strchrnul instead of
8972 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
8974 * gnulib/aclocal.m4: Regenerate.
8975 * gnulib/config.in: Regenerate.
8976 * gnulib/configure: Regenerate.
8977 * gnulib/import/Makefile.am: Regenerate.
8978 * gnulib/import/Makefile.in: Regenerate.
8979 * gnulib/import/m4/gnulib-cache.m4: Regenerate.
8980 * gnulib/import/m4/gnulib-comp.m4: Regenerate.
8981 * gnulib/import/m4/rawmemchr.m4: New file.
8982 * gnulib/import/m4/strchrnul.m4: New file.
8983 * gnulib/import/rawmemchr.c: New file.
8984 * gnulib/import/rawmemchr.valgrind: New file.
8985 * gnulib/import/strchrnul.c: New file.
8986 * gnulib/import/strchrnul.valgrind: New file.
8988 2016-01-28 Yao Qi <yao.qi@linaro.org>
8990 * breakpoint.c (build_target_command_list): Don't call continue
8992 (build_target_condition_list): Likewise.
8994 2016-01-27 Kevin Buettner <kevinb@redhat.com>
8996 * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
8997 bytes as aggregates.
8999 2016-01-27 Joel Brobecker <brobecker@adacore.com>
9001 * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
9002 Linespec Maintainers.
9004 2016-01-26 Simon Marchi <simon.marchi@ericsson.com>
9006 * common/common-utils.c (skip_spaces): Fix comment.
9007 (skip_to_space_const): Likewise.
9009 2016-01-25 Yao Qi <yao.qi@linaro.org>
9011 * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
9012 Remove argument pc. Get pc by regcache_read_pc. Callers updated.
9013 (arm_deal_with_atomic_sequence_raw): Likewise.
9014 (thumb_get_next_pcs_raw): Likewise.
9015 (arm_get_next_pcs_raw): Likewise.
9016 (arm_get_next_pcs): Remove argument pc. Callers updated.
9017 * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
9019 2016-01-25 Mark Wielaard <mjw@redhat.com>
9021 * ada-lang.c (ada_evaluate_subexp): Add proper else block.
9022 * c-typeprint.c (c_type_print_base): Fix misleading indentation of
9024 * inflow.c (child_terminal_ours_1): Fix misleading indentation of
9025 statement block by introducing an else.
9026 * linux-record.c (record_linux_sockaddr): Fix misleading indentation
9027 of return statements.
9028 (record_linux_msghdr): Likewise.
9030 2016-01-25 Pedro Alves <palves@redhat.com>
9033 * infrun.c (handle_inferior_event_1) <fork/vfork>: Update
9034 parent/child running states.
9036 2016-01-25 Pedro Alves <palves@redhat.com>
9039 * linux-nat.c (kill_one_lwp): New, factored out from ...
9040 (kill_callback): ... this.
9041 (kill_wait_callback): New, factored out from ...
9042 (kill_wait_one_lwp): ... this.
9043 (kill_unfollowed_fork_children): New function.
9044 (linux_nat_kill): Use it.
9046 2016-01-22 John Baldwin <jhb@FreeBSD.org>
9048 * fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
9050 2016-01-22 Yao Qi <yao.qi@linaro.org>
9052 * arm-linux-nat.c (fetch_fpregs): Call perror_with_name
9054 (store_fpregs, fetch_regs, store_regs): Likewise.
9055 (fetch_wmmx_regs, store_wmmx_regs): Likewise.
9056 (fetch_vfp_regs, store_vfp_regs): Likewise.
9058 2016-01-21 Doug Evans <dje@google.com>
9060 * breakpoint.c (init_breakpoint_sal): Add comment.
9062 2016-01-21 Marcin Kościelnicki <koriakin@0x04.net>
9064 * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
9066 2016-01-21 Andrew Burgess <andrew.burgess@embecosm.com>
9068 * disasm.c (maybe_add_dis_line_entry): Rename to...
9069 (add_dis_line_entry): ...this, and update header comment.
9070 (do_mixed_source_and_assembly): Now use add_dis_line_entry.
9072 2016-01-21 Pedro Alves <palves@redhat.com>
9074 * Makefile.in (COMPILER_CFLAGS): New.
9075 (CXXFLAGS): Get it from configure.
9076 (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
9078 * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
9080 * configure: Regenerate.
9082 2016-01-21 Joel Brobecker <brobecker@adacore.com>
9084 * location.h (new_address_location): Add new parameters
9085 "addr_string" and "addr_string_len".
9086 (get_address_string_location): Add declaration.
9087 * location.c (new_address_location): Add new parameters
9088 "addr_string" and "addr_string_len". If not NULL, store
9089 a copy of the addr_string in the new location as well.
9090 (get_address_string_location): New function.
9091 (string_to_event_location): Update call to new_address_location.
9092 * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
9093 Save the event location in the parser's state before
9094 passing it to convert_address_location_to_sals.
9095 * breakpoint.c (create_thread_event_breakpoint): Update call
9096 to new_address_location.
9097 (init_breakpoint_sal): Get the event location's string, if any,
9098 and use it to update call to new_address_location.
9099 * python/py-finishbreakpoint.c (bpfinishpy_init):
9100 Update call to new_address_location.
9101 * spu-tdep.c (spu_catch_start): Likewise.
9103 * config/djgpp/fnchange.lst: Add entries for
9104 gdb/testsuite/gdb.base/break-fun-addr1.c and
9105 gdb/testsuite/gdb.base/break-fun-addr2.c.
9107 2016-01-21 Yao Qi <yao.qi@linaro.org>
9109 * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
9110 is_thumb and set it according to CPSR saved on the stack.
9111 (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
9112 arm_linux_sigreturn_next_pc.
9114 2016-01-20 Simon Marchi <simon.marchi@polymtl.ca>
9116 * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
9117 Fix enumerators sort key function.
9119 2016-01-20 Joel Brobecker <brobecker@adacore.com>
9121 * printcmd.c (print_scalar_formatted): Move binary operator from
9122 end of line to beginning of next line. Adjust formatting
9125 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9127 * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
9130 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9132 * fbsd-tdep.c (find_stop_signal): Remove.
9133 (struct fbsd_collect_regset_section_cb) <lwp>: New field.
9134 <stop_signal>: New field.
9135 <abort_iteration>: New field.
9136 (fbsd_collect_regset_section_cb): Use new fields.
9137 (fbsd_collect_thread_registers): New function.
9138 (struct fbsd_corefile_thread_data): New structure.
9139 (fbsd_corefile_thread): New function.
9140 (fbsd_make_corefile_notes): Use new function to dump notes for each
9141 non-exited thread in a process.
9143 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9145 * configure.ac: Check for support for LWP names on FreeBSD.
9146 * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
9147 [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
9148 (fbsd_fetch_kinfo_proc): Move function earlier.
9149 [PT_LWPINFO] (fbsd_thread_alive): New function.
9150 [PT_LWPINFO] (fbsd_pid_to_str): New function.
9151 [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
9152 [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
9153 [PT_LWPINFO] (fbsd_add_threads): New function.
9154 [PT_LWPINFO] (fbsd_update_thread_list): New function.
9155 [PT_LWPINFO] New variable super_resume.
9156 [PT_LWPINFO] (resume_one_thread_cb): New function.
9157 [PT_LWPINFO] (resume_all_threads_cb): New function.
9158 [PT_LWPINFO] (fbsd_resume): New function.
9159 (fbsd_remember_child): Save full ptid instead of plain pid.
9160 (fbsd_is_child_pending): Return ptid of saved child process.
9161 (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
9163 [PT_LWP_EVENTS] Handle LWP events.
9164 [TDP_RFPPWAIT] Include LWP in child ptid.
9165 (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
9166 (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
9167 Add threads for existing processes.
9168 (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
9169 "fbsd_thread_alive".
9170 Set "to_pid_to_str" to "fbsd_pid_to_str".
9171 [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
9173 [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
9174 Set "to_has_thread_control" to "tc_schedlock".
9175 Set "to_resume" to "fbsd_resume".
9176 (_initialize_fbsd_nat): New function.
9177 * configure: Regenerate.
9178 * config.in: Regenerate.
9180 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9182 * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
9184 (amd64bsd_store_inferior_registers): Use get_ptrace_pid.
9185 (amd64bsd_dr_get): Use get_ptrace_pid.
9186 (amd64bsd_dr_set): Use get_ptrace_pid.
9187 * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
9188 (i386bsd_store_inferior_registers): Use get_ptrace_pid.
9189 (i386bsd_dr_get): Use get_ptrace_pid.
9190 (i386bsd_dr_set): Use get_ptrace_pid.
9191 * inf-ptrace.c (get_ptrace_pid): Export.
9192 * inf-ptrace.h (get_ptrace_pid): Declare.
9193 * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
9194 (ppcfbsd_store_inferior_registers): Use lwp id.
9196 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9198 * fbsd_tdep.c (fbsd_core_pid_to_str): New function.
9199 (fbsd_core_thread_name): New function.
9200 (fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
9201 Add "core_thread_name" gdbarch method.
9203 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9205 * corelow.c (core_thread_name): New function.
9206 (init_core_ops): Use "core_thread_name" for the "to_thread_name"
9208 * gdbarch.sh (core_thread_name): New gdbarch callback.
9209 * gdbarch.h: Re-generate.
9210 * gdbarch.c: Re-generate.
9212 2016-01-19 Simon Marchi <simon.marchi@polymtl.ca>
9214 * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
9215 convert gdb.Value to integer type using int().
9217 2016-01-19 John Baldwin <jhb@FreeBSD.org>
9219 * configure.ac: Include <sys/types.h when checking for "r_fs" in
9221 * configure: Regenerate.
9223 2016-01-19 Pedro Alves <palves@redhat.com>
9225 * ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
9226 * break-catch-throw.c (re_set_exception_catchpoint): Pass the
9227 current program space down to linespec decoding and breakpoint
9229 * breakpoint.c (parse_breakpoint_sals): Adjust calls to
9231 (until_break_command): Adjust calls to decode_line_1.
9232 (base_breakpoint_decode_location, bkpt_decode_location): Add
9233 'search_pspace' parameter. Pass it along.
9234 (bkpt_probe_create_sals_from_location): Adjust calls to
9236 (tracepoint_decode_location, tracepoint_probe_decode_location)
9237 (strace_marker_decode_location): Add 'search_pspace' parameter.
9239 (all_locations_are_pending): Rewrite to take a breakpoint and
9240 program space as arguments instead.
9241 (hoist_existing_locations): New function.
9242 (update_breakpoint_locations): Add 'filter_pspace' parameter. Use
9243 hoist_existing_locations instead of always removing all locations,
9244 and adjust to all_locations_are_pending change.
9245 (location_to_sals): Add 'search_pspace' parameter. Pass it along.
9246 Don't disable the breakpoint if there are other locations in
9247 another program space.
9248 (breakpoint_re_set_default): Adjust to pass down the current
9249 program space as filter program space.
9250 (decode_location_default): Add 'search_pspace' parameter and pass
9252 (prepare_re_set_context): Don't switch program space here.
9253 (breakpoint_re_set): Use save_current_space_and_thread instead of
9254 save_current_program_space.
9255 * breakpoint.h (struct breakpoint_ops) <decode_location>: Add
9256 'search_pspace' parameter.
9257 (update_breakpoint_locations): Add 'filter_pspace' parameter.
9258 * cli/cli-cmds.c (edit_command, list_command): Adjust calls to
9260 * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
9261 program space as filter program space.
9262 * linespec.c (struct linespec_state) <search_pspace>: New field.
9263 (create_sals_line_offset, convert_explicit_location_to_sals)
9264 (parse_linespec): Pass the search program space down.
9265 (linespec_state_constructor): Add 'search_pspace' parameter.
9267 (linespec_parser_new): Add 'search_pspace' parameter and pass it
9269 (linespec_lex_to_end): Adjust.
9270 (decode_line_full, decode_line_1): Add 'search_pspace' parameter
9272 (decode_line_with_last_displayed): Adjust.
9273 (collect_symtabs_from_filename, symtabs_from_filename): New
9274 'search_pspace' parameter. Use it.
9275 (find_function_symbols): Pass the search program space down.
9276 * linespec.h (decode_line_1, decode_line_full): Add
9277 'search_pspace' parameter.
9278 * probe.c (parse_probes_in_pspace): New function, factored out
9280 (parse_probes): ... this. Add 'search_pspace' parameter and use
9282 * probe.h (parse_probes): Add pspace' parameter.
9283 * python/python.c (gdbpy_decode_line): Adjust.
9284 * tracepoint.c (scope_info): Adjust.
9286 2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
9288 * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
9289 instruction support.
9290 (micromips_next_pc): Likewise.
9291 (micromips_scan_prologue): Likewise.
9292 (micromips_deal_with_atomic_sequence): Likewise.
9293 (micromips_stack_frame_destroyed_p): Likewise.
9294 (mips_breakpoint_from_pc): Likewise.
9296 2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
9298 * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
9299 unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
9301 2016-01-18 Pedro Alves <palves@redhat.com>
9303 * NEWS: Mention that GDB now displays the ID and name of the
9304 thread that hit a breakpoint or received a signal.
9305 * break-catch-sig.c (signal_catchpoint_print_it): Use
9306 maybe_print_thread_hit_breakpoint.
9307 * break-catch-syscall.c (print_it_catch_syscall): Likewise.
9308 * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
9309 * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
9310 (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
9311 (print_it_catch_exec, print_it_ranged_breakpoint)
9312 (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
9313 Use maybe_print_thread_hit_breakpoint.
9314 * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
9315 * gdbthread.h (show_thread_that_caused_stop): Declare.
9316 * infrun.c (print_signal_received_reason): Print which thread
9318 * thread.c (show_thread_that_caused_stop): New function.
9320 2016-01-18 Gary Benson <gbenson@redhat.com>
9322 * nat/linux-namespaces.c (do_fork): New function.
9323 (linux_mntns_get_helper): Use the above.
9325 2016-01-17 Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de> (tiny change)
9327 Pushed by Joel Brobecker <brobecker@adacore.com>.
9329 * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
9330 if the function has no name.
9332 2016-01-15 Sandra Loosemore <sandra@codesourcery.com>
9334 * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
9335 Conditionalize for Windows host.
9336 (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
9337 (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
9338 (phony_iconv_open): Handle both UTF-32 endiannesses.
9339 (phony_iconv): Likewise. Check for output overflow and clean up
9340 out-of-input cases. Correct adjustment to input buffer pointer.
9341 (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
9344 2016-01-15 Pedro Alves <palves@redhat.com>
9346 * NEWS: Mention star wildcard ranges.
9347 * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
9348 (number_range_setup_range): New function.
9349 * cli/cli-utils.h (number_range_setup_range): New declaration.
9350 * thread.c (thread_apply_command): Support star TID ranges.
9351 * tid-parse.c (tid_range_parser_finished)
9352 (tid_range_parser_string, tid_range_parser_skip)
9353 (get_tid_or_range, get_tid_or_range): Handle
9354 TID_RANGE_STATE_STAR_RANGE.
9355 (tid_range_parser_star_range): New function.
9356 * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
9358 (tid_range_parser_star_range): New declaration.
9360 2016-01-15 Pedro Alves <palves@redhat.com>
9362 * thread.c (thread_apply_command): Use the tid range parser to
9363 advance past the thread ID list.
9364 * tid-parse.c (get_positive_number_trailer): New function.
9365 (parse_thread_id): Use it.
9366 (get_tid_or_range): Use it. Return 0 instead of throwing invalid
9368 (get_tid_or_range): Detect negative values. Return 0 instead of
9369 throwing invalid thread ID error.
9371 2016-01-14 Yao Qi <yao.qi@linaro.org>
9373 * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
9375 (arm_linux_get_next_pcs_ops): Install
9376 arm_linux_get_next_pcs_syscall_next_pc.
9377 (arm_linux_syscall_next_pc): Change to ...
9378 (arm_linux_get_next_pcs_syscall_next_pc): ... it.
9379 (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
9380 * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
9381 (arm_get_next_pcs_syscall_next_pc): Make it static. Don't
9382 call tdep->syscall_next_pc.
9383 * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
9384 (arm_get_next_pcs_syscall_next_pc): Remove.
9386 2016-01-14 Yao Qi <yao.qi@linaro.org>
9388 * remote.c (remote_set_syscall_catchpoint): Cast to char *.
9389 * thread.c (do_captured_thread_select): Cast to const char *.
9391 2016-01-14 Yao Qi <yao.qi@linaro.org>
9393 * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
9394 argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
9395 (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
9397 * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
9398 <arm_thumb2_breakpoint>: Remove.
9399 <has_thumb2_breakpoint>: New field.
9400 (arm_get_next_pcs_ctor): Update declaration.
9401 * arm-linux-tdep.c (arm_linux_software_single_step): Pass
9402 1 to arm_get_next_pcs_ctor.
9403 * arm-tdep.c (arm_software_single_step): Pass 0 to
9404 arm_get_next_pcs_ctor.
9406 2016-01-13 Ulrich Weigand <uweigand@de.ibm.com>
9408 * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
9410 2016-01-13 Yao Qi <yao.qi@linaro.org>
9412 * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
9413 byte_order_for_code to read instruction.
9415 2016-01-13 Pedro Alves <palves@redhat.com>
9417 * NEWS: Mention $_gthread.
9418 * gdbthread.h (struct thread_info) <global_num>: Mention
9420 * thread.c (thread_num_make_value_helper): New function.
9421 (thread_id_make_value): Delete.
9422 (thread_id_per_inf_num_make_value, global_thread_id_make_value):
9424 (thread_funcs): Adjust.
9425 (gthread_funcs): New.
9426 (_initialize_thread): Register $_gthread variable.
9428 2016-01-13 Pedro Alves <palves@redhat.com>
9430 * NEWS: Mention "info threads -gid".
9431 * gdbthread.h (struct thread_info) <global_num>: Mention "info
9433 * thread.c (info_threads_command): Handle "-gid".
9434 (_initialize_thread): Adjust "info threads" help string to mention
9437 2016-01-13 Pedro Alves <palves@redhat.com>
9439 * NEWS: Mention InferiorThread.global_num.
9440 * python/py-infthread.c (thpy_get_global_num): New function.
9441 (thread_object_getset): Register "global_num".
9443 2016-01-13 Pedro Alves <palves@redhat.com>
9445 * NEWS: Mention that thread IDs are now per inferior and global
9447 * Makefile.in (SFILES): Add tid-parse.c.
9448 (COMMON_OBS): Add tid-parse.o.
9449 (HFILES_NO_SRCDIR): Add tid-parse.h.
9450 * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
9451 * breakpoint.c (insert_breakpoint_locations)
9452 (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
9453 (print_one_breakpoint_location, set_longjmp_breakpoint)
9454 (check_longjmp_breakpoint_for_call_dummy)
9455 (set_momentary_breakpoint): Adjust to use global IDs.
9456 (find_condition_and_thread, watch_command_1): Use parse_thread_id.
9457 (until_break_command, longjmp_bkpt_dtor)
9458 (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
9460 * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
9461 ptid_to_global_thread_id.
9462 * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
9463 * gdbthread.h (struct thread_info): Rename field 'num' to
9464 'global_num. Add new fields 'per_inf_num' and 'inf'.
9465 (thread_id_to_pid): Rename thread_id_to_pid to
9466 global_thread_id_to_ptid.
9467 (pid_to_thread_id): Rename to ...
9468 (ptid_to_global_thread_id): ... this.
9469 (valid_thread_id): Rename to ...
9470 (valid_global_thread_id): ... this.
9471 (find_thread_id): Rename to ...
9472 (find_thread_global_id): ... this.
9473 (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
9474 (print_thread_info): Add comment.
9475 * tid-parse.h: New file.
9476 * tid-parse.c: New file.
9477 * infcmd.c (step_command_fsm_prepare)
9478 (step_command_fsm_should_stop): Adjust to use the global thread
9480 (until_next_command, until_next_command)
9481 (finish_command_fsm_should_stop): Adjust to use the global thread
9483 (attach_post_wait): Adjust to check the inferior number too.
9484 * inferior.h (struct inferior) <highest_thread_num>: New field.
9485 * infrun.c (handle_signal_stop)
9486 (insert_exception_resume_breakpoint)
9487 (insert_exception_resume_from_probe): Adjust to use the global
9489 * record-btrace.c (record_btrace_open): Use global thread IDs.
9490 * remote.c (process_initial_stop_replies): Also consider the
9492 * target.c (target_pre_inferior): Clear the inferior's highest
9494 * thread.c (clear_thread_inferior_resources): Adjust to use the
9496 (new_thread): New inferior parameter. Adjust to use it. Set both
9497 the thread's global ID and the thread's per-inferior ID.
9498 (add_thread_silent): Adjust.
9499 (find_thread_global_id): New.
9500 (find_thread_id): Make static. Adjust to rename.
9501 (valid_thread_id): Rename to ...
9502 (valid_global_thread_id): ... this.
9503 (pid_to_thread_id): Rename to ...
9504 (ptid_to_global_thread_id): ... this.
9505 (thread_id_to_pid): Rename to ...
9506 (global_thread_id_to_ptid): ... this. Adjust.
9507 (first_thread_of_process): Adjust.
9508 (do_captured_list_thread_ids): Adjust to use global thread IDs.
9509 (should_print_thread): New function.
9510 (print_thread_info): Rename to ...
9511 (print_thread_info_1): ... this, and add new show_global_ids
9512 parameter. Handle it. Iterate over inferiors.
9513 (print_thread_info): Reimplement as wrapper around
9514 print_thread_info_1.
9515 (show_inferior_qualified_tids): New function.
9516 (print_thread_id): Use it.
9517 (tp_array_compar): Compare inferior numbers too.
9518 (thread_apply_command): Use tid_range_parser.
9519 (do_captured_thread_select): Use parse_thread_id.
9520 (thread_id_make_value): Adjust.
9521 (_initialize_thread): Adjust "info threads" help string.
9522 * varobj.c (struct varobj_root): Update comment.
9523 (varobj_create): Adjust to use global thread IDs.
9524 (value_of_root_1): Adjust to use global_thread_id_to_ptid.
9525 * windows-tdep.c (display_tib): No longer accept an argument.
9526 * cli/cli-utils.c (get_number_trailer): Make extern.
9527 * cli/cli-utils.h (get_number_trailer): Declare.
9528 (get_number_const): Adjust documentation.
9529 * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
9531 * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
9532 (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
9533 * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
9534 * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
9536 * python/py-breakpoint.c (bppy_set_thread): Likewise.
9537 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
9538 * python/py-infthread.c (thpy_get_num): Add comment and return the
9539 per-inferior thread ID.
9540 (thread_object_getset): Update comment of "num".
9542 2016-01-13 Pedro Alves <palves@redhat.com>
9544 * breakpoint.c (remove_threaded_breakpoints)
9545 (print_one_breakpoint_location): Use print_thread_id.
9546 * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
9547 (btrace_fetch, btrace_clear): Use print_thread_id.
9548 * common/print-utils.c (CELLSIZE): Delete.
9549 (get_cell): Rename to ...
9550 (get_print_cell): ... this and made extern. Adjust call callers.
9551 Adjust to use PRINT_CELL_SIZE.
9552 * common/print-utils.h (get_print_cell): Declare.
9553 (PRINT_CELL_SIZE): New.
9554 * gdbthread.h (print_thread_id): Declare.
9555 * infcmd.c (signal_command): Use print_thread_id.
9556 * inferior.c (print_inferior): Use print_thread_id.
9557 * infrun.c (handle_signal_stop)
9558 (insert_exception_resume_breakpoint)
9559 (insert_exception_resume_from_probe)
9560 (print_signal_received_reason): Use print_thread_id.
9561 * record-btrace.c (record_btrace_info)
9562 (record_btrace_resume_thread, record_btrace_cancel_resume)
9563 (record_btrace_step_thread, record_btrace_wait): Use
9565 * thread.c (thread_apply_all_command): Use print_thread_id.
9566 (print_thread_id): New function.
9567 (thread_apply_command): Use print_thread_id.
9568 (thread_command, thread_find_command, do_captured_thread_select):
9569 Use print_thread_id.
9571 2016-01-13 Pedro Alves <palves@redhat.com>
9573 * NEWS: Mention InferiorThread.inferior.
9574 * python/py-infthread.c (thpy_get_inferior): New.
9575 (thread_object_getset): Register "inferior".
9577 2016-01-13 Pedro Alves <palves@redhat.com>
9579 * NEWS: Mention $_inferior.
9580 * inferior.c (inferior_id_make_value): New.
9581 (inferior_funcs): New.
9582 (_initialize_inferior): Create $_inferior variable.
9584 2016-01-13 Pedro Alves <palves@redhat.com>
9586 PR breakpoints/19388
9587 * frame.c (get_current_frame): Use validate_registers_access.
9588 * gdbthread.h (validate_registers_access): Declare.
9589 * infrun.c (validate_siginfo_access): Delete.
9590 (siginfo_value_read, siginfo_value_write): Use
9591 validate_registers_access.
9592 * thread.c (validate_registers_access): New function.
9594 2016-01-12 Josh Stone <jistone@redhat.com>
9595 Philippe Waroquiers <philippe.waroquiers@skynet.be>
9597 * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
9598 syscall_entry and syscall_return stop reasons. Mention GDB
9599 support for remote catch syscall.
9600 * remote.c (PACKET_QCatchSyscalls): New enum.
9601 (remote_set_syscall_catchpoint): New function.
9602 (remote_protocol_features): New element for QCatchSyscalls.
9603 (remote_parse_stop_reply): Parse syscall_entry/return stops.
9604 (init_remote_ops): Install remote_set_syscall_catchpoint.
9605 (_initialize_remote): Config QCatchSyscalls.
9606 * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
9608 2016-01-12 Yao Qi <yao.qi@linaro.org>
9610 * nat/linux-ptrace.c (linux_child_function): Cast child_stack
9611 to gdb_byte * and pass to linux_fork_to_function.
9613 2016-01-12 Yao Qi <yao.qi@linaro.org>
9615 * nat/linux-ptrace.c (linux_fork_to_function): Change type
9616 of argument 'function'.
9617 (linux_grandchild_function): Change return type to 'int'.
9618 Change child_stack's type to 'void *'.
9619 (linux_child_function): Likewise.
9621 2016-01-12 Pedro Alves <palves@redhat.com>
9623 Remove use of the registered trademark symbol throughout.
9625 2016-01-12 Thomas Schwinge <thomas@codesourcery.com>
9627 * reply_mig_hack.awk: Rewrite one regular expression.
9629 2016-01-11 Mike Frysinger <vapier@gentoo.org>
9631 * acinclude.m4: Include new warning.m4 file.
9632 * configure: Regenerated.
9633 * configure.ac: Move all warning logic ...
9634 * warning.m4: ... here.
9636 2016-01-08 Yao Qi <yao.qi@linaro.org>
9638 * extension.c: Include target.h.
9639 (set_active_ext_lang): Only call install_gdb_sigint_handler,
9640 check_quit_flag, and set_quit_flag if target_terminal_is_ours
9642 (restore_active_ext_lang): Likewise.
9643 * target.c (target_terminal_is_ours): New function.
9644 * target.h (target_terminal_is_ours): Declare.
9646 2016-01-07 Maciej W. Rozycki <macro@imgtec.com>
9648 * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
9649 to `err' in the little-endian leg.
9651 2016-01-06 Yao Qi <yao.qi@linaro.org>
9653 * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
9655 (thumb_get_next_pcs_raw): Make it static.
9656 (arm_get_next_pcs_raw): Likewise.
9657 * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
9659 (arm_get_next_pcs_raw): Likewise.
9661 2016-01-05 Mike Frysinger <vapier@gentoo.org>
9663 * version.in: Change cvs to git.
9665 2016-01-05 Mike Frysinger <vapier@gentoo.org>
9667 * configure.tgt (score-*-*): Delete gdb_sim assignment.
9669 2016-01-05 Pedro Alves <palves@redhat.com>
9672 * configure.ac: Define WITH_PPC_SIM when linking in the sim and
9673 the target is powerpc*.
9674 * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
9676 * configure: Regenerate.
9677 * config.in: Regenerate.
9679 2016-01-04 Markus Metzger <markus.t.metzger@intel.com>
9681 * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
9683 2016-01-02 Mike Frysinger <vapier@gentoo.org>
9685 * configure.tgt (powerpc*-*-*): Delete test call and
9686 always assign gdb_sim.
9688 2016-01-01 Joel Brobecker <brobecker@adacore.com>
9690 Update year range in copyright notice of all files.
9692 2016-01-01 Joel Brobecker <brobecker@adacore.com>
9694 * top.c (print_gdb_version): Change copyright year in version
9697 2016-01-01 Joel Brobecker <brobecker@adacore.com>
9699 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
9701 For older changes see ChangeLog-2015.
9707 version-control: never
projects / deliverable / binutils-gdb.git / blob