1 Tue Apr 7 15:13:58 1998 Stan Shebs <shebs@andros.cygnus.com>
3 * gdbtk.tcl: Remove, no longer used.
5 Tue Apr 7 12:49:45 1998 Keith Seitz <keiths@onions.cygnus.com>
7 * gdbtk.c (gdb_cmd): NEVER call the busy, update, and idle hooks.
9 Tue Mar 31 15:42:06 1998 Keith Seitz <keiths@onions.cygnus.com>
11 * gdbtk.c (gdb_loadfile): Don't use the return result from
12 sprintf, which returns a char * under SunOS4.
14 Tue Mar 31 17:18:43 1998 Ian Lance Taylor <ian@cygnus.com>
16 * configure.in: Add $(LIBIDETCL) as well as $(LIBIDE) if
18 * Makefile.in (IDE_CFLAGS_X): Add -I for libidetcl/src.
22 Sun Mar 29 21:19:46 1998 Keith Seitz <keiths@onions.cygnus.com>
24 * gdbtk.c (gdb_get_tracepoint_info): Change formatting of address.
25 (tracepoint_exists): Remove code which confuses assembly traces.
27 Sat Mar 28 12:13:23 1998 Keith Seitz <keiths@onions.cygnus.com>
29 * gdbtk.c (gdb_cmd): If argc > 2, assume that the busy and idle hooks
32 Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
34 * gdbtk.c: (gdb_trace_status) new function.
35 (gdbtk_init) added command "gdb_is_tracing".
36 (tracepoint_notify) added passcount information.
38 Thu Mar 26 12:00:35 1998 Martin M. Hunt <hunt@cygnus.com>
40 * gdbtk.c (gdbtk_fputs): Insert fencepost.
41 (gdb_loc): Correct pc calculation.
42 (gdb_immediate_command): Return if a load is in progress.
43 (gdb_cmd): Return if a load is in progress.
44 (target_stop_wrapper): New function.
45 (gdb_stop): Call target_stop_wrapper.
46 (x_event): Add fencepost and optimize load cancel check.
47 (gdbtk_start_timer): Set up structs only once.
48 (gdbtk_stop_timer): Just use preset structs to set timer parameters.
49 (gdb_loadfile): If file cannot be loaded, return error message.
50 (gdb_loadfile): Add space before tab so that lines without
51 a '-' can later be changed to have one.
53 Wed Mar 25 14:08:51 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
55 * gdbtk.c (gdbtk_pre_add_symbol): Use Tcl_merge to form Tcl commands.
57 Mon Mar 23 13:41:39 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
59 * gdbtk.c (gdb_get_mem): Rewrite to fetch entire contents
60 of the memory window at once.
62 Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
64 Merged changes from Foundry: list follows by author:
66 - Tom Tromey <tromey@cygnus.com>
68 * Makefile.in (gdbres.o): New target.
69 (WINDRES): New define.
71 * configure.in (WINDRES): Define.
72 (CONFIG_OBS): Include gdbres.o on Windows.
73 * gdbtool.ico: New file.
75 * gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
76 (gdbtk_cleanup): Call ide_interface_deregister_all.
77 (gdbtk_init): Pass event handle to cleanup.
78 (TclDebug): Use Tcl_Merge to construct command.
79 (gdbtk_init): Call ide_create_cygwin_path_command.
81 - Martin M. Hunt <hunt@cygnus.com>
83 * gdbtk.c (gdb_set_bp): Set addr_string for bp.
84 (gdb_get_breakpoint_info): Demangle function
85 names in breakpoint info.
87 (gdb_loc, gdb_listfuncs): Demangle C++
89 (gdb_set_bp): Properly quote filename to fix
90 problems with spaces. Send pc back as a hex string.
91 (gdb_listfuncs): Remove debugging line.
92 Turn off some debugging lines.
93 (breakpoint_notify): Return correct line number.
94 (gdb_get_breakpoint_info): Return correct line number.
95 (gdb_set_bp): New function to provide a better way to
97 (gdbtk_readline, gdbtk_readline_begin): Memory
98 allocated by tcl needs to be freed by Tcl_Free().
99 (find_file_in_dir): Deleted.
100 (gdb_find_file_command): Call full_lookup_symtab().
101 (gdb_listfuncs): Call full_lookup_symtab().
102 (full_lookup_symtab): New function. Like lookup_symtab
103 except handles multiple files with the same basename,
104 full pathnames, and always sets symtab->fullname.
105 (gdb_loadfile): Call full_lookup_symtab(). Clear
107 (gdb_loadfile): Don't tag lines without source.
108 Tag source lines with source_tag.
109 (gdb_find_file_command, find_file_in_dir):
110 Rewrite. Now searches symtabs and psymtabs for a match
111 on the partial or full filename. Returns the full pathname.
112 (gdb_loadfile): Realloc additional memory
113 if someone loads in a file with more than 160,000
114 lines. I don't know if this really works because
115 I don't have enough memory to test it.
116 (gdb_sourcelines): Deleted.
117 (gdb_loadfile): New function. Takes a text widget
118 and loads it with the contents of a file. Marks
119 and tags source lines.
120 (pc_changed): New function.
121 (get_pc_register): Returns the value of
123 (gdb_loc): If looking on the stack, return
124 real pc along with calling source line.
125 (gdb_loc): Return "" instead of "N/A" if
126 filename is not found.
127 (gdb_get_breakpoint_info): Same.
128 (get_register): For Natural mode, set format to 0.
129 Minor bugfixes from keiths.
130 (TclDebug): New function for debugging use.
131 (gdb_loc): Return correct PC for frames
132 that are not the innermost frame.
133 (gdb_listfiles): Rewritten to use object
134 API. Now takes an optional dirname which will cause
135 only files in that directory or its subdirectories
136 to be returned. Now returns basenames instead of
138 (gdb_cmd): Set/reset load_in_progress flag.
139 (call_wrapper): Don't pop up dialog for errors in
140 downloads; just abort download.
141 (gdbtk_load_hash): Set return value correctly.
143 - Keith Seitz <keiths@onions.cygnus.com>
145 * gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
146 called by routines which might block, allowing us to update the GUI.
147 (gdbtk_wait): Move timer calls to annotation hooks.
148 (gdbtk_init): Define the annotation hooks.
149 (gdbtk_annotate_starting): New function for cygwin32 hosts.
150 (gdbtk_annotate_stopped): New function for cygwin32 hosts.
151 (gdbtk_annotate_exited): New function for cygwin32 hosts.
152 (gdbtk_annotate_signalled): New function. for cygwin32 hosts.
153 (gdbtk_init): Use gdbtk_print_frame_info hook.
154 (gdbtk_print_frame_info): New function which sets current_source_symtab
155 based on the given symtab and line info.
156 (gdb_immediate_command): New function which does
158 output. (Contrast to gdb_cmd.)
159 (gdb_prompt_command): New function to return gdb's prompt.
160 (find_file_in_dir): New functon which searches source paths
161 for a given filename.
162 (gdb_find_file): New function which returns path to given file -- uses
164 (gdbtk_init): Install "gdb_immediate", "gdb_find_file", and
166 commands into interpreter.
168 - Ian Lance Taylor <ian@cygnus.com>
170 * gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
172 (gdb_cmd): If __CYGWIN32__, if executing the load command, call
173 gdbtk_start_timer and gdbtk_stop_timer.
174 (call_wrapper): If __CYGWIN32__, if the timer is going, turn it
175 off. Clear load_in_progress.
176 (x_event): If load_in_progress, quit if download_cancel_ok.
177 (gdbtk_start_timer): Set gdbtk_timer_going.
178 (gdbtk_stop_timer): Clear gdbtk_timer_going.
179 (gdbtk_wait): Call x_event.
180 (gdbtk_init): Call ide_create_win_grab_command if
182 (gdb_clear_file): Clear stop_pc.
185 Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com>
187 * gdbtk.c (gdbtk_modify_tracepoint): Define new tracepoint modification hook.
188 (gdbtk_print_frame_info): Define this hook so that current_source_symtab
190 (gdb_actions_command): Use free_actions () from tracepoint.c/h.
192 Mon Jan 26 11:37:55 1998 Keith Seitz <keiths@onions.cygnus.com>
194 * gdbtk.c (gdb_actions_command): Make note of next action
195 before freeing all references to it.
197 Sat Jan 24 23:52:08 1998 Martin M. Hunt <hunt@cygnus.com>
199 * gdbtk.c: Merge from Foundry branch.
200 (TclDebug): New debugging function.
201 (gdb_loc): For frames, find address of calling function
202 instead of whatever is on the stack (usually the next
204 (gdb_listfiles): Takes an optional pathname argument and
205 returns an alphabetized list of basenames of files in the
208 Wed Jan 22 10:37:02 1998 Keith Seitz <keiths@onions.cygnus.com>
210 * symfile.c: Define two new hooks for symbol reading:
211 "pre_add_symbol_hook" and "post_add_symbol_hook". These hooks
212 are called before we begin reading symbols, and after we finish.
213 (generic_load): Use new symbol reading hooks and get rid of
216 * gdbtk.c (gdbtk_init): Add hooks for pre- and post-symbol reading.
217 (gdbtk_pre_add_symbol): New function: the pre-add-symbol hook.
218 (gdbtk_post_add_symbol): New function: the post-add-symbol hook.
219 (find_file_in_dir): New function. Moved the guts of gdb_find_file_command
220 into here to allow its use by others.
221 (gdb_loc): Use find_file_in_dir to return the real path to the file
222 (or "N/A" if we can't find it).
224 * configure.in (TIX_LIB_EXT): Define new variable for those special cases
225 when TCL_SHLIB_SUFFIX is not enough to specify the dependency.
227 * configure: Regenerate.
229 Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
231 * Makefile.in (uninstall): Remove installed gdbtcl dir, if one
234 Thu Jan 15 12:42:28 1998 Keith Seitz <keiths@onions.cygnus.com>
236 * gdbtk.c (gdb_immediate_command): New function which does not buffer any
237 output. (Contrast to gdb_cmd.)
238 (gdbtk_init): Install "gdb_immediate" command into interpreter.
240 Wed Jan 14 16:38:44 1998 Keith Seitz <keiths@pizza.cygnus.com>
242 * configure.in (--enable-gdbtk): If tcl was built with --enable-shared,
243 use TCL_SHLIB_SUFFIX to specify the suffix of the library file so that
244 we don't expect to see "libfoo.a" instead of "libfoo.{so,sl, etc}".
246 * configure: Regenerate.
248 Wed Dec 31 16:50:26 1998 Keith Seitz (keiths@onions.cygnus.com)
250 * gdbtk.c (gdb_actions_command): extract and save step count
251 from "while-stepping" command
253 Tue Dec 16 21:16:42 1997 Ian Lance Taylor <ian@cygnus.com>
255 * Makefile.in (LIBGUI): New variable.
256 (GUI_CFLAGS_X): New variable.
257 (IDE_CFLAGS): Add $(GUI_CFLAGS_X).
258 * configure.in: Add $(LIBGUI) to TCL_LIBS and CONFIG_DEPS.
259 * configure: Rebuild.
261 Wed Dec 10 13:16:45 1997 Keith Seitz <keiths@onions.cygnus.com>
263 * gdbtk.c (gdb_get_tracepoint_info): Use info in struct
264 symtab_and_line (not struct tracepoint) so that we get the
265 real line info for an address. Arrange data more like
266 gdb_get_breakpoint_info.
267 (tracepoint_notify): Use info in struct symtab_and_line again.
268 (gdbtk_init): Add command "gdb_get_tracepoint_list" into
270 (gdb_get_tracepoint_list): New function that aids the source
271 window in displaying tracepoints when the file changes.
273 Fri Dec 5 10:31:23 1997 Keith Seitz <keiths@pizza.cygnus.com>
275 * gdbtk.c (gdbtk_init): Add gdb_find_file into interpreter.
276 (gdb_find_file_command): New function which searches source path
277 to find the real full filename of a file.
279 Mon Dec 1 10:19:44 1997 Keith Seitz <keiths@onions.cygnus.com>
281 * gdbtk.c: Move include of "guitcl.h" back out of IDE ifdef.
282 (gdbtk_init): Move ide_initialize_paths out of IDE ifdef.
284 * configure.in (TCL_LIBS, CONFIG_DEPS): Add IDE libraries for all
286 (CONFIG_OBS): Remove tracepoint.o, which should always be included.
288 * configure: regenerate
290 * Makefile.in (install-only): ALWAYS install the new gdbtk
291 (REMOTE_OBS): add tracepoint.o
293 Thu Nov 27 09:07:18 1997 Michael Meissner <meissner@cygnus.com>
295 * configure.in ({TCL_LIBS,CONFIG_DEPS}): Don't add IDE libraries
297 (CONFIG_OBS): Add tracepoint.o to list if --enable-gdbtk.
298 * configure: Regenerate.
300 * gdbtk.c (gdb_get_breakpoint_info): Add missing filename
302 (toplevel): Move include of guitcl.h into #ifdef IDE region.
303 (gdbtk_init): Move ide_initialize_paths call into #ifdef IDE
306 * Makefile.in (gdbtk.o): Update dependencies.
308 Wed Nov 26 15:02:43 1997 Keith Seitz <keiths@onions.cygnus.com>
310 * gdbtk.c (gdb_loc): symtab_to_filename can return NULL.
311 (breakpoint_notify): Ditto.
312 (gdb_get_breakpoint_info): Ditto.
314 Wed Nov 26 11:33:09 1997 Keith Seitz <keiths@onions.cygnus.com>
316 Merge in code from Foundry branch:
318 * Makefile.in (install-only): install the new gdbtk, not the old
320 * gdbtk.c (gdbtk_call_command): also run idle hooks for class_trace
322 (gdbtk_init): Add new commands "gdb_get_locals", "gdb_get_args",
323 "gdb_get_function", "gdb_get_line", "gdb_get_file",
324 "gdb_tracepoint_exists", "gdb_get_tracepoint_info", "gdb_actions",
326 (gdb_get_vars_command): New function.
327 (gdb_get_line_command): New.
328 (gdb_get_file_command): New.
329 (gdb_get_function_command): New.
330 (gdb_get_tracepoint_info): New.
331 (gdbtk_create_tracepoint): New.
332 (gdbtk_delete_tracepoint): New.
333 (tracepoint_notify): New.
334 (tracepoint_exists): New.
335 (gdb_actions_command): New.
336 (gdb_tracepoint_exists_command): New.
337 (gdb_prompt_command): New.
339 Thu Nov 13 18:15:54 1997 Ian Lance Taylor <ian@cygnus.com>
341 * gdbtk.c: Move include of gdbcore.h to top of file.
342 (close_bfds): New static function if _WIN32.
343 (gdbtk_readline): Call close_bfds.
344 (call_wrapper, tk_command_loop): Likewise.
345 (gdb_clear_file): New static function.
346 (gdbtk_init): Create gdb_clear_file Tcl command.
348 Wed Nov 12 14:58:39 1997 Jeff Holcomb <jeffh@cygnus.com>
350 * gdbtk.c: gdbtk_load_hash and ui_load_progress_hook return an
352 (gdbtk_load_hash): download hash routine returns an int result.
354 Mon Nov 10 15:11:51 1997 Ian Lance Taylor <ian@cygnus.com>
356 * gdbtk.c (gdbtk_init): Call ide_create_shell_execute_command if
358 * configure.in: Add -lshell32 to WIN32LIBS on cygwin32.
359 * configure: Rebuild.
361 Sun Nov 9 16:25:34 1997 Tom Tromey <tromey@cygnus.com>
363 * gdbtk.c (gdbtk_init): Run ide_create_help_command.
365 Tue Oct 28 17:31:47 1997 Martin M. Hunt <hunt@cygnus.com>
367 * gdbtk.c (gdbtk_init): Call ide_create_winprint_command.
369 Thu Oct 23 15:53:37 1997 Ian Lance Taylor <ian@cygnus.com>
371 * configure.in: Add -lgdi32 to WIN32LIBS when linking gdbtk on
373 * configure: Rebuild.
375 Wed Oct 22 21:32:54 1997 Martin M. Hunt <hunt@cygnus.com>
377 * gdbtk.c (gdbtk_init): Create sizebox command on Windows.
379 Thu Oct 9 14:33:21 1997 Ian Lance Taylor <ian@cygnus.com>
381 * gdbtk.c (gdbtk_init): Remove assertion argument from call to
382 ide_create_window_register_command.
384 Wed Oct 1 11:09:52 1997 Tom Tromey <tromey@cygnus.com>
386 * gdbtk.c (gdbtk_init): Pass name of restore interface to
387 ide_create_window_register_command.
389 Fri Sep 26 21:08:22 1997 Keith Seitz <keiths@pizza.cygnus.com>
391 * gdbtk.c (gdbtk_init): Initialize ui_load_progress_hook.
393 Thu Sep 25 03:05:00 1997 Martin M. Hunt <hunt@cygnus.com>
395 * gdbtk.c (gdb_load_info): New function. Returns a list
396 of section names and sizes for an executable.
397 (gdbtk_load_hash): Stub function to call tcl function
400 Tue Sep 23 01:29:00 1997 Martin M. Hunt <hunt@cygnus.com>
402 * gdbtk.c (gdb_get_mem): Fix compiler warning.
404 Sun Sep 21 00:15:00 1997 Martin M. Hunt <hunt@cygnus.com>
406 * gdbtk.c (gdb_get_mem): Fix problem with ASCII dump.
408 Tue Sep 16 18:07:17 1997 Martin M. Hunt <hunt@cygnus.com>
410 * gdbtk.c (gdb_get_mem): New function. Returns
411 a formatted memory dump with optional ASCII dump.
413 Mon Sep 8 12:48:50 1997 Ian Lance Taylor <ian@cygnus.com>
415 * gdbtk.c: Include ilutk.h if IDE.
416 (gdb_confirm_quit, gdb_force_quit): New static functions.
417 (gdbtk_init): Add Tcl commands gdb_confirm_quit and
420 Mon Sep 8 03:05:33 1997 Martin M. Hunt <hunt@cygnus.com>
422 * gdbtk.c (gdb_get_breakpoint_info): Now returns the
423 function a breakpoint is in.
425 Fri Sep 5 20:23:58 1997 Ian Lance Taylor <ian@cygnus.com>
427 * gdbtk.c (gdbtk_init): Call ide_create_exit_command.
429 Wed Sep 3 19:39:15 1997 Ian Lance Taylor <ian@cygnus.com>
431 * gdbtk.c: Include guitcl.h.
432 (gdbtk_init): Always call ide_initialize_paths. Set the Tcl
433 variable IDE to 1 when using the IDE. Always try using auto path
435 * Makefile.in (IDE_CFLAGS_X): Always include libide.
436 (LIBIDE): New variable.
438 (IDE_DEPS): Omit libide.
439 * configure.in: Add LIBIDE to TCL_LIBS and CONFIG_DEPS.
440 * configure: Rebuild.
442 Mon Aug 25 02:28:55 1997 Keith Seitz <keiths@pizza.cygnus.com>
444 * gdbtk.c: (gdb_target_has_inferior) check if inferior_pid is non-zero
445 before assuming that the inferior is running.
447 Mon Aug 25 01:06:48 1997 Ian Lance Taylor <ian@cygnus.com>
449 * gdbtk.c (gdbtk_start_timer): Pass third argument to setitimer.
450 (gdbtk_stop_timer): Likewise.
452 Mon Aug 25 00:23:08 1997 Keith Seitz <keiths@pizza.cygnus.com>
454 * gdbtk.c: (gdbtk_init) create new command "gdb_target_has_execution"
455 (gdb_target_has_execution_command) new function
457 Sun Aug 24 20:27:22 1997 Ian Lance Taylor <ian@cygnus.com>
459 * gdbtk.c (gdb_loc): If there are no symbols, just bail
461 (tk_command_loop): Print errors encountered while running
464 Sun Aug 24 13:44:03 1997 Tom Tromey <tromey@cygnus.com>
466 * gdbtk.c (gdbtk_init): Run ide_create_build_command.
468 Sat Aug 23 21:53:39 1997 Ian Lance Taylor <ian@cygnus.com>
470 * gdbtk.c: If CYGWIN32, include <sys/time.h>.
471 (x_fd): Don't define if WINNT.
472 (gdbtk_start_timer, gdbtk_stop_timer): New static functions if
474 (gdbtk_wait): Don't set up signal handling if WINNT. If CYGWIN32,
475 call gdbtk_start_timer and gdbtk_stop_timer.
476 (gdbtk_init): Don't set up signal handling or make x_fd
477 asynchronous if CYGWIN32.
479 Fri Aug 22 15:23:15 1997 Ian Lance Taylor <ian@cygnus.com>
481 * gdbtk.c (error_string_ptr): New static variable.
482 (gdbtk_fputs): If result_ptr is NULL, and error_string_ptr is not
483 NULL, and we're outputting to stderr, append string to
484 error_string_ptr rather than calling gdbtk_tcl_fputs.
485 (call_wrapper): Set up error_string_ptr. Put both error string
486 and normal string in Tcl result.
488 * gdbtk.c (gdbtk_init): Don't call ide_run_server_init until after
491 Thu Aug 21 19:14:38 1997 Ian Lance Taylor <ian@cygnus.com>
493 * gdbtk.c: If _WIN32, include winuser.h.
494 (gdbtk_init): If _WIN32, use MessageBox to display an error
497 Thu Aug 21 00:48:00 1997 Martin M. Hunt <hunt@pern.cygnus.com>
499 * gdbtk.c (gdbtk_init): Add call to ide_run_server_init().
500 (gdb_cmd): For the load command, don't buffer the I/O.
502 Wed Aug 20 11:41:22 1997 Martin M. Hunt <hunt@cygnus.com>
504 * gdbtk.c (gdbtk_query): Chaneg free() call to Tcl_Free().
506 Tue Aug 19 17:09:19 1997 Ian Lance Taylor <ian@cygnus.com>
508 * Makefile.in (TCL_DEPS, TK_DEPS): New variables.
509 (ITCL_DEPS, TIX_DEPS): New variables.
510 (IDE_DEPS): New variable.
511 (CDEPS): Include @CONFIG_DEPS@.
512 * configure.in: Set and substitute CONFIG_DEPS and TIX_DEPS.
513 * configure: Rebuild.
515 Sun Aug 17 00:42:11 1997 Martin M. Hunt <hunt@cygnus.com>
517 * gdbtk.c (gdb_listfuncs): New function that returns
518 a list of all the functions in a source file.
520 Tue Aug 12 16:35:21 1997 Ian Lance Taylor <ian@cygnus.com>
522 * Makefile.in (install-only): Install tclIndex if ENABLE_IDE.
524 Mon Aug 11 10:43:04 1997 Tom Tromey <tromey@cygnus.com>
526 * gdbtk.c (gdbtk_init): Use ide_event_init_from_environment.
528 Fri Aug 8 15:59:24 1997 Ian Lance Taylor <ian@cygnus.com>
530 * gdbtk.c (gdbtk_init): Change gdbtk_lib_tmp and gdbtk_file to be
531 dynamically allocated, rather than fixed size. Pass "gdbtcl" to
532 ide_initialize_paths to match installed directory name. If IDE,
533 use auto_path to search for main.tcl.
534 * Makefile.in (install-only): If ENABLE_IDE, install from gdbtcl2
537 * gdbtk.c (gdbtk_cleanup): New static function.
538 (gdbtk_init): Add gdbtk_cleanup as a final cleanup. Uncomment
539 call to ide_initialize_paths. If we can't initialize the event
540 system, set GDBTK_IDE to 0 in the Tcl interpreter. Create the
541 ide_window_register and the ide_window commands. Initialize tk,
542 itcl, and tix after initializing the IDE.
544 * configure.in (tixdir): Update for cygwin32 case for Tcl 8.0.
545 * configure: Rebuild.
547 Fri Aug 8 00:13:32 1997 Martin M. Hunt <hunt@cygnus.com>
549 * gdbtk.c (breakpoint_notify): Change buffer size from 100
550 to 256 to avoid memory corruption with very long pathnames.
552 Thu Aug 7 14:08:23 1997 Martin M. Hunt <hunt@cygnus.com>
554 * configure.in: Change required Tix version to 4.1.8.0 .
555 * configure: Rebuilt.
557 Fri Aug 1 15:21:44 1997 Ian Lance Taylor <ian@cygnus.com>
559 * gdbtk.c (Tcl_Alloc): Don't provide our own version of this if
561 (Tcl_Realloc, Tcl_Free): Likewise.
562 * configure.in: Check for cygwin32 environment. Define and
563 substitute WIN32LIBS and WIN32LDAPP. Always set configdir to
564 unix; setting it to win was for an old Tcl/Tk configuration
566 * aclocal.m4 (CY_AC_LOAD_TKCONFIG): Substitute TK_BUILD_INCLUDES.
567 * Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
568 (WIN32LDAPP, WIN32LIBS): Define.
569 (CLIBS): Add $(WIN32LIBS).
570 (gdb): Use $(WIN32LDAPP).
571 * configure: Rebuild.
573 Tue Jul 22 19:45:37 1997 Martin M. Hunt <hunt@cygnus.com>
575 * configure.in, aclocal.m4: Another fix to find the
576 correct Tix library name.
578 * configure: Rebuilt.
580 Mon Jul 21 22:24:07 1997 Martin M. Hunt <hunt@cygnus.com>
582 * aclocal.m4: Search for the correct tix library.
584 Thu Jul 10 00:02:41 1997 Martin M. Hunt <hunt@cygnus.com>
586 * Makefile.in, configure.in, aclocal.m4: Add Itcl, Tix, and
587 IDE configuration information.
589 * gdbtk.c (breakpoint_notify): Send address, linenumber and
590 filename when a breakpoint is set. Avoids call to bp_info.
591 (gdbtk_init): Call Tcl_FindExecutable(). Add code to handle
592 Itcl, Tix and IDE initialization.
594 * configure: Regenerated.
596 Fri Jun 13 10:28:09 1997 Fred Fish <fnf@cygnus.com>
598 * gdbtk.c (gdbtk_init): Make truth value test explicit.
599 Remove unused static variable "Gdbtk_Library".
601 Sat Jun 7 02:34:19 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
603 * gdbtk.c (gdb_get_breakpoint_info): Add string for new
604 enumeration del_at_next_stop to bpdisp array.
606 Tue Jun 3 15:46:51 1997 Tom Tromey <tromey@cygnus.com>
608 * Makefile.in (LIB_RUNTIME_DIR): New variable.
610 Wed May 7 19:10:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
612 * gdbtk.c (wrapped_call): New function - make actual call to tk
614 (call_wrapper): Rewrite to use top.c:catch_errors.
616 * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
619 Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
621 * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
623 Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
625 * Makefile.in (install-only): Make list of gdbtcl files to install
626 explicit - was picking up files such as ChangeLog etc.
627 (install-only): Don't blindly create the directory.
629 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
631 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory
632 instead of gdbtk.tcl.
634 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
636 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
637 default, not $(srcdir).
639 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
641 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
643 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
644 to GDBTK_LIBRARY, which is now a path to search.
645 (gdb_path_conv): New function. Convert Cygwin32 pathname to
648 * {aclocal.m4,configure.in}: Changes for Windows builds.
650 * configure: Rebuilt.
652 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
654 * configure: Regenerated.
655 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
657 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
659 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
662 * configure: Regenerated.
663 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
666 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
668 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
670 Wed Dec 11 18:51:35 1996 Mark Alexander <marka@cygnus.com>
672 * gdbtk.c (gdb_loc): Correct truncation of PC on 64-bit MIPS.
674 Tue Nov 19 09:26:14 1996 Tom Tromey <tromey@cygnus.com>
676 * gdbtk.c (gdbtk_readline): Fix memory leak.
678 Mon Nov 18 23:43:05 1996 Tom Tromey <tromey@cygnus.com>
680 Fixes for Tcl 7.6 / Tk 4.2:
681 * gdbtk.tcl (apply_filespec): Use tk_getOpenFile.
682 Remove old fileselect code.
683 * gdbtk.c (Tcl_Alloc): Rename from Tcl_Malloc.
685 Fri Sep 27 10:25:30 1996 Fred Fish <fnf@cygnus.com>
687 * gdbtk.tcl (create_copyright_window): Increase timeout from
688 15 seconds to 30 seconds.
690 Wed Sep 4 17:28:40 1996 Stu Grossman (grossman@critters.cygnus.com)
692 * configure configure.in: Add host *windows* to list of hosts
693 that don't support GDBtk.
695 Fri Aug 23 00:44:57 1996 Fred Fish <fnf@cygnus.com>
697 * gdbtk.c (gdbtk_init): Check for a DISPLAY env variable and
698 gracefully degrade to using command line interface if none is
701 Fri Aug 9 12:32:53 1996 Tom Tromey <tromey@creche.cygnus.com>
703 * Makefile.in (LIB_INSTALL_DIR): New macro.
704 (TCL): Include @TCL_LD_SEARCH_FLAGS@.
706 Thu Aug 1 20:35:01 1996 Tom Tromey <tromey@creche.cygnus.com>
708 * gdbtk.c (mainWindow): Deleted.
709 (cleanup_init): Don't destroy main window.
710 (gdbtk_init): Main window now created by Tk_Init.
712 * configure.in: Most X checks now handled automatically by Tk.
713 Use new macros to find Tcl/Tk.
714 * aclocal.m4: New version for new Tcl/Tk; from Don Libes.
715 * config.in, configure: Regenerated.
717 * Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
718 X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
720 Thu Aug 1 16:12:05 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
722 * Makefile.in (gdbtk.tcl): put in $(datadir), not $(libdir).
724 Fri Jul 26 14:07:37 1996 Ian Lance Taylor <ian@cygnus.com>
726 * gdbtk.c (gdb_disassemble): Initialize di.flavour.
728 Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
730 * gdbtk.c (null_routine): Ditto.
731 (gdbtk_flush): Ditto.
732 (gdbtk_fputs): Ditto.
733 (gdbtk_query): Ditto.
734 (gdbtk_readline): Ditto.
735 (gdbtk_readline_end): Ditto.
736 (gdb_get_breakpoint_list): Ditto.
737 (gdb_get_breakpoint_info): Ditto.
738 (breakpoint_notify): Ditto.
739 (gdbtk_create_breakpoint): Ditto.
740 (gdbtk_delete_breakpoint): Ditto.
741 (gdbtk_modify_breakpoint): Ditto.
744 (gdb_sourcelines): Ditto.
745 (map_arg_registers): Ditto.
746 (get_register_name): Ditto.
747 (gdb_regnames): Ditto.
748 (get_register): Ditto.
749 (gdb_fetch_registers): Ditto.
750 (register_changed_p): Ditto.
751 (gdb_changed_register_list): Ditto.
753 (call_wrapper): Ditto.
754 (gdb_listfiles): Ditto.
756 (gdbtk_dis_asm_read_memory): Ditto.
757 (compare_lines): Ditto.
758 (gdb_disassemble): Ditto.
760 (cleanup_init): Ditto.
761 (gdbtk_interactive): Ditto.
764 (gdbtk_call_command): Ditto.
765 (tk_command_loop): Ditto.
768 * gdbtk.c (register_changed_p): Remove unused local variable "buf".
770 Sat Jul 20 17:46:40 1996 Fred Fish <fnf@cygnus.com>
772 * gdbtk.tcl (files_command): Reorder the binding tags for
773 the listbox widget to avoid referencing the listbox after
774 the containing widget has been destroyed by the action of
777 Sat Jul 20 10:09:28 1996 Fred Fish <fnf@cygnus.com>
779 * gdbtk.tcl (delete_expr): Unset corresponding element of
780 expr_update_list when destroying an expression.
781 (create_expr_window): Initialize expr_num, delete_expr_num,
782 and expr_update_list here when each new expression window
783 is created, rather than once at startup.
785 Mon Jul 15 16:44:05 1996 Stu Grossman (grossman@critters.cygnus.com)
787 * gdbtk.c (gdb_disassemble): Setup di.mach from
788 tm_print_insn_info.mach, and set endian from TARGET_BYTE_ORDER.
790 Fri Jun 21 11:04:47 1996 Fred Fish <fnf@cygnus.com>
792 * gdbtk.tcl (create_register_windows): Include missing '$'s.
793 Add global declarations for various reg_format_* variables.
794 * gdbtk.tcl (populate_register_window): Make initial window one
795 line taller to account for new column header line.
797 Fri Jun 21 09:46:47 1996 Fred Fish <fnf@cygnus.com>
799 * gdbtk.c (get_register): Support for printing raw formats.
800 * gdbtk.tcl: Add hint for using debug_interface.
801 (center_window, add_breakpoint_frame, delete_breakpoint_frame):
802 Enclose arg in braces for consistency.
803 (create_registers_window, populate_reg_window, update_registers):
804 Major rewrite to support displaying multiple formats in the register
806 (init_reg_info): New function.
807 (recompute_reg_display_list): Reset reg_display_list, start
808 register display lines at line 2.
810 Thu Jun 20 08:18:59 1996 Fred Fish <fnf@cygnus.com>
812 * gdbtk.tcl (gdbtk_tcl_readline_begin): Handle backspace to
813 avoid backing up over prompt. At every input, make sure insert
814 point is at least after command start, handle control-u to delete
816 (tclsh): Handle backspace to avoid backing up over prompt. Handle
817 control-u to delete current input line.
819 Wed Jun 19 17:23:38 1996 Geoffrey Noer <noer@cygnus.com>
821 * configure.in: disable gdbtk for *cygwin32* hosted compiles
822 * configure: regenerated with autoconf 2.8
824 Sun May 19 16:49:37 1996 Fred Fish <fnf@cygnus.com>
826 * gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end):
828 (tk_command_loop): Set instream to NULL to enable Tk user interaction.
829 (gdbtk_init): Set readline_begin_hook, readline_hook,
830 and readline_end_hook.
831 * gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline,
832 gdbtk_tcl_readline_end): New functions.
833 (tclsh): Pack scroll bar on right side of window, not left.
835 Fri May 17 13:54:34 1996 Fred Fish <fnf@cygnus.com>
837 * gdbtk.tcl (create_command_window): Change a misspelled "get"
838 to the intended "cget".
839 (delete_line): Fix so it deletes the current line at the
842 Thu May 16 19:20:29 1996 Fred Fish <fnf@cygnus.com>
844 * gdbtk.tcl (gdb_prompt): Set this early on.
845 (create_command_window): Use gdb_prompt rather than "(gdb) ".
846 (gdbtk_tcl_preloop): Proc executed just prior to Tk main loop.
847 (tclsh): If an evaluation window already exists, just bring it
848 to the front instead of trying to create another.
849 * gdbtk.c (tk_command_loop): New function.
850 (gdbtk_init): Call tk_command_loop rather than Tk_MainLoop.
852 Thu May 16 16:16:35 1996 Fred Fish <fnf@cygnus.com>
854 * gdbtk.tcl (evaluate_tcl_command, tclsh): New functions that
855 implement a tcl evaluation window for gdbtk maintainers to use.
857 Thu May 16 11:42:58 1996 Tom Tromey <tromey@creche.cygnus.com>
859 * gdbtk.tcl (files_command): Correctly insert list of files into
862 * gdbtk.tcl (files_command): listbox command no longer accepts
865 Wed May 15 16:04:09 1996 Stan Shebs <shebs@andros.cygnus.com>
867 * gdbtk.tcl (create_command_window): If command window's buffer
868 is disabled, don't execute any of the key bindings.
870 Mon May 13 13:43:25 1996 Fred Fish <fnf@cygnus.com>
872 * gdbtk.c (tk_command): Catch case where no argument is given
873 since this will cause the tcl interpreter to dump core.
875 Wed May 8 20:33:24 1996 Fred Fish <fnf@cygnus.com>
877 * gdbtk.c: Fix a couple of misspellings.
879 Thu May 2 19:17:49 1996 Stan Shebs <shebs@andros.cygnus.com>
881 * gdbtk.tcl (debug_interface): New global, use to aid debugging.
882 (insert_breakpoint_tag, delete_breakpoint_tag): Fix range.
883 (file_popup_menu): Delete, never used.
884 (listing_window_popup): Rename from listing_window_button_1,
885 remove breakpoint toggling code.
886 (toggle_breakpoint): New procedure.
887 (create_file_win): Bind popup menu to button 2, toggle breakpoints
888 with button 1 in breakpoint area, add display of tagged areas if
891 Fri Apr 5 13:44:40 1996 Stan Shebs <shebs@andros.cygnus.com>
893 * gdbtk.c (running_now): New global variable.
894 (gdb_cmd): Test it before executing any command.
895 (gdbtk_call_command): Set it when inferior is running.
896 * gdbtk.tcl (gdbtk_tcl_busy, gdbtk_tcl_idle): Enable and
897 disable interaction with command window's text appropriately.
899 Fri Apr 5 13:25:42 1996 Michael Meissner <meissner@tiktok.cygnus.com>
901 * gdbtk.c (SIOCSPGRP, linux): If on Linux, undef SIOCSPGRP, since
902 some versions of the kernel don't support it.
904 Tue Feb 6 16:31:25 1996 Tom Tromey <tromey@creche.cygnus.com>
906 * gdbtk.tcl (create_file_win): Eliminate text widget B1 binding so
907 double-clicking will work again.
908 (create_asm_win): Put "break" at end of all B1 bindings.
909 (create_file_win): Lower "sel" tag, don't raise it.
910 (ensure_line_visible): New proc.
911 (update_listing, update_assembly): Use it.
912 (create_copyright_window): Destroy window on Leave event.
913 (create_command_window): Put "break" at end of all B2 bindings.
915 Wed Jan 24 15:28:41 1996 Tom Tromey <tromey@creche.cygnus.com>
917 * gdbtk.tcl, gdbtk.c: Updated copyrights.
919 * configure.in: Look for -ldl or -ldld when using Tcl 7.5 or
921 * configure: Rebuilt.
923 Tue Jan 23 09:00:48 1996 Doug Evans <dje@charmed.cygnus.com>
925 * gdbtk.c (gdb_disassemble): Pass fprintf_unfiltered to
926 INIT_DISASSEMBLE_INFO.
928 Mon Jan 15 09:58:41 1996 Tom Tromey <tromey@creche.cygnus.com>
930 * gdbtk.tcl (create_expr_window): Many changes to update GUI.
931 (add_expr): Changes from create_expr_window.
932 (create_command_window): Set focus.
933 (delete_expr): Rewrote.
934 (expr_update_button): New proc.
935 (add_expr): Put bindings on FocusIn, FocusOut.
936 Don't allow .file_popup to be torn off.
938 Fri Jan 12 09:36:17 1996 Tom Tromey <tromey@creche.cygnus.com>
940 * gdbtk.tcl (gdbtk_tcl_query): Swap Yes and No buttons.
941 (update_listing): Use lassign. Use "see" to scroll. Don't need
942 screen_top, screen_bot, screen_height.
943 (update_assembly): Use "see" to scroll.
944 (textscrollproc): Removed.
945 (create_file_win): Don't use textscrollproc.
946 (asmscrollproc): Removed.
947 (create_asm_window): Don't use asmscrollproc.
948 (create_asm_win): Ditto.
949 (screen_height, screen_top, screen_bot): Removed.
950 (run_editor): New proc.
951 (build_framework): Use it.
952 (create_file_win, create_source_window): Don't use textscrollproc.
953 (create_breakpoints_window): Set -xscrollcommand on canvas.
954 (not_implemented_yet): Default button is 0.
955 (delete_char): Don't use tk_textBackspace.
956 (create_command_window): Allow Tk bindings to fire after deleting
958 (create_command_window): Make Delete delete left, not right.
960 Thu Jan 11 10:08:14 1996 Tom Tromey <tromey@creche.cygnus.com>
962 * gdbtk.tcl (FSBox): Don't use tk_listboxSingleSelect.
964 Changes in sync with expect:
965 * configure.in (ENABLE_GDBTK): Use CY_AC_PATH_TCL and
967 * aclocal.m4: Replaced with version from expect.
968 * configure: Regenerated.
970 Wed Jan 10 09:07:22 1996 Tom Tromey <tromey@creche.cygnus.com>
972 * gdbtk.tcl (gdbtk_tcl_fputs, gdbtk_tcl_fputs_error,
973 gdbtk_tcl_flush): Use "see", not "yview".
974 (gdbtk_tcl_query): Use questhead bitmap.
975 various: Always wrap condition of 'if' in {...}.
976 (add_breakpoint_frame): Set -value on radiobuttons.
978 (add_breakpoint_frame): Use lassign, not series of assignments.
980 (interactive_cmd): Use "see", not "yview".
981 (not_implemented_yet): Use warning bitmap.
982 (update_expr): Don't allow $expr to be evalled by Tcl.
983 (create_expr_window): Don't use "focus".
984 (delete_char, delete_line): Define globally.
985 (delete_line, delete_char, create_command_window, update_autocmd,
986 build_framework, create_asm_win, create_file_win): Use "see", not
988 (create_copyright_window, center_window, bind_widget_after_class):
990 (FSBox,create_command_window, create_autocmd_window): Binding
992 (textscrollproc): Define globally.
993 (build_framework): tk_menuBar no longer needed. Keys Prior, Next,
994 Home, End, Up, and Down are all defined by Tk.
995 (apply_filespec): Use error bitmap in dialog.
996 (files_command): Don't use tk_listboxSingleSelect.
997 (files_command): Don't use "uniq" to remove duplicates from a
999 (update_assembly): Use lassign.
1000 (create_asm_win): Removed redundant bindings.
1001 (listing_window_button_1, file_popup_menu): Use tk_popup.
1002 (ButtonRelease-1 binding): Just remove tag from window; rest
1005 * gdbtk.c (gdbtk_query): Use Tcl_Merge to provide quoting.
1006 (call_wrapper): Use Tcl_Eval, not Tcl_VarEval.
1007 (gdbtk_call_command): Ditto.
1009 Thu Jan 4 16:04:54 1996 Stu Grossman (grossman@cygnus.com)
1011 * configure configure.in: Make --enable-gdbtk be the default.
1013 Thu Dec 28 15:10:49 1995 Stan Shebs <shebs@andros.cygnus.com>
1015 * README.GDBTK: Polish introductory paragraph.
1017 Mon Oct 16 11:27:06 1995 Stu Grossman (grossman@cygnus.com)
1019 * gdbtk.c (gdb_disassemble): Use fprintf_unfiltered instead of
1022 Tue Oct 10 15:26:39 1995 Fred Fish <fnf@cygnus.com>
1024 * README.GDBTK: Updated for version 4.15.
1026 Sat Aug 19 17:20:22 1995 Michael Tiemann <tiemann@axon.cygnus.com>
1028 * gdbtk.tcl: ENABLE comes back as "1" or "0", not "enable" or
1030 Also, wire up the breakpoint window so that it can be demo'd.
1032 Tue Aug 1 11:44:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1034 * gdbtk.c: Include "gdb_string.h" instead of <string.h>.
1036 Tue Jun 20 10:19:40 1995 Stu Grossman (grossman@cygnus.com)
1038 * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free.
1040 * gdbtk.tcl (add_breakpoint_frame): Add more fields.
1041 * (create_file_win create_asm_win build_framework): Create null
1042 bindings for meta keys to keep window from dropping down to
1043 insertion point when meta is pressed by itself. New bindings:
1044 Up/Down - Scroll up/down one line at a time
1045 Next/Prior - Scroll up/down one page at a time
1046 Home/End - Warp to current pc/end of file
1047 * (build_framework): Turn on breakpoint menu.
1048 * (create_command_window): Implement tab completion. Add binding
1049 for ^C to stop target.
1051 Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
1053 * gdbtk.c: Conditionalize use of stdarg rather than varargs on
1054 ANSI_PROTOTYPES not __STDC__; it must match the definition of
1057 Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1059 * gdbtk.c (gdbtk_query): Use stdarg.h macros when compiling with
1062 Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com>
1064 * gdbtk.c (gdb_disassemble): Read from inferior if connected
1065 to a VxWorks target.
1067 Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com)
1069 * README.GDBTK: New file. Contains the obvious.
1071 Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1073 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
1074 F_SETOWN is, use that.
1076 Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1078 * Makefile.in (X11_INCLUDES): Define as empty.
1079 (X11_CFLAGS): Define as including $(X11_INCLUDES).
1080 (X11_LIB_SWITCHES): Define as empty.
1081 (X11_LIBS): Define as -lX11.
1083 * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
1084 and --x-libraries switches, setting the X11_INCLUDES and
1085 X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11
1086 in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
1088 * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
1089 it. This means that the stop button doesn't work, but is better
1092 Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com)
1094 * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
1095 locations (per-host) for X11 include files.
1096 * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
1098 (X11_CFLAGS): Add this to indicate the locs
1099 of the R5 include files.
1101 Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com)
1103 * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint
1104 type is not bp_breakpoint.
1106 Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com)
1109 * gdbtk.c: General cleanups, get rid of unused variables. Redo
1110 handling of stdout/stderr to just return output as the result of
1111 the tcl command that caused the output. Cleanup -Wall stuff.
1112 * (breakpoint_notify): Now returns just action and breakpoint
1114 * (gdb_get_breakpoint_list): New routine. Does the obvious.
1115 * (gdb_get_breakpoint_info): Mostly derived from the old
1116 breakpoint_notify, but returns lots more info.
1117 * (dsprintf_append_element): Helper routine, works like printf,
1118 but appends a tcl element onto the specified DString. Good for
1119 building up lists as return values.
1120 * (gdbtk_enable/disable_breakpoint): Go away. Replaced with
1121 gdbtk_modify_breakpoint.
1122 * (*many routines*): Use new result protocol.
1123 * (call_wrapper): Make sure that recursive calls don't trash results.
1124 * gdbtk.tcl: New windows, autocmd, and breakpoints.
1125 * (gdbtk_tcl_fputs): Don't use $current_output_win redirection
1126 anymore. It's not needed (in fact, this routine may not be needed
1128 * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
1129 notification protocol.
1130 * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
1132 * (interactive_cmd): Use this wrapper around button invocations
1133 of many commands. This will catch errors and put the results into
1134 the command window. It also updates all the other windows.
1135 * Also, change reliefs of most things to sunken. This actually
1137 * (create_file_win): Fix margin binding to allow breakpoints to
1139 * (create_asm_win): Use return value of gdb_disassemble instead
1140 of implicit I/O to the command window.
1141 * (create_command_window): Use new result protocol to get output
1144 Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
1146 * gdbtk.c (gdb_disassemble): Deference pointer to function before
1147 calling it (pre-ANSI compilers generally require this).
1149 Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com)
1151 * gdbtk.c (gdb_disassemble): Get rid of
1152 dis_asm_read_memory_hook. We can now call the disassemblers
1153 directly and have no need for this hook anymore.
1155 Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
1157 * gdbtk.tcl (create_file_win): Disable old popup menu for source
1160 Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
1162 * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
1164 * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
1165 popping up expression window for the first time.
1167 Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
1169 * gdbtk.tcl (create_registers_window): Work around a radiobutton
1170 widget bug to make Options|Natural button work.
1172 * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
1173 g++ caused by out-of-order pc's.
1174 * gdbtk.tcl (files_command): Remove duplicate file names. Also,
1177 Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
1179 * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
1182 Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
1184 * gdbtk.c, gdbtk.tcl: Update/add copyright.
1185 * gdbtk.tcl (build_framework): Several fixes for filespec widget,
1186 including dismiss button, and better error handling.
1187 * (create_command_win): Bind button 2 to retrieve selection.
1189 Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
1191 * gdbtk.tcl: Add button to control mixed source disassembly.
1192 Use text widgets in expr window. The give me more control over
1194 Add auto-updating of exprs in expression window.
1195 Handle expressions out of scope a bit better.
1196 Make selected window pop up to the top when invoked via the
1198 Make copyright message have raised relief.
1200 * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
1203 Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
1205 * gdbtk.c (finish_saving_output): Don't do anything if not saving
1207 * (breakpoint_notify): Don't send null filename to tcl.
1208 * (gdb_eval): New tcl command to eval an expression.
1209 * (gdb_disassemble): New tcl command to do disassembly. This
1210 allows tcl code to choose between exec file and target memeory,
1211 and can also do mixed source and assembly.
1212 * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
1213 that more of the environment is set up. Also, create link between
1214 gdb and tcl vars disassemble{-_}from{-_}exec.
1216 * gdbtk.tcl: New expression window support.
1217 * Make assembly window be 80 columns wide.
1218 * Use new disassembly method. Add menu items to select
1219 disassembly from exec file or target.
1220 * Change View menubar item to Options.
1222 * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
1223 since they don't exist yet.
1225 * Pop up a copyright window on startup.
1227 Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
1229 * gdbtk.tcl (build_framework): Add standard commands menu, more
1230 windows to standard windows menu.
1231 (not_implemented_yet): Clarify message.
1233 Fri Dec 30 15:49:00 1994 Stan Shebs <shebs@andros.cygnus.com>
1235 * gdbtk.tcl (FSBox): New proc, File Selection Box code from exmh.
1236 (not_implemented_yet): New proc.
1237 (build_framework): Add various file commands to file menu.
1239 Fri Dec 23 16:18:50 1994 Stu Grossman (grossman@cygnus.com)
1241 * gdbtk.c (gdbtk_wait gdbtk_init): Portability improvements for
1244 Mon Dec 19 09:55:47 1994 Stu Grossman (grossman@cygnus.com)
1246 * gdbtk.tcl (update_assembly): Force update to make sure that pc
1247 is visible when creating new assembly windows.
1249 Sun Dec 18 23:31:20 1994 Stu Grossman (grossman@cygnus.com)
1251 * gdbtk.c (gdbtk_wait gdbtk_init): Use different method of
1252 enabling I/O interrupts for SVR4 (streams).
1253 * (start_saving_output save_output get_saved_output
1254 finish_saving_output flush_holdbuf gdbtk_flush gdbtk_fputs
1256 Totally revamp to use TCLs dynamic string functions. Also, quote
1257 all data passed back to TCL to prevent errors with unmatched
1258 braces, odd characters, etc... This fixes several wierd problems
1259 with outputting strings containing unmatched braces.
1260 * (breakpoint_notify gdb_loc): Use long hex format to output
1261 addresses of breakpoints and PCs. This fixes some Alpha problems.
1262 * (breakpoint_notify): Add stream arg to call to gdbtk_fputs.
1263 * (gdb_listfiles): Also, go through the symtabs when looking for
1264 files. This makes xcoff work (sort of), but probably breaks
1266 * (gdb_stop): Return TCL_OK instead of nothing. This fixes odd
1267 TCL errors when hitting stop button.
1268 * (tk_command): Don't pass interp->result on to Tcl_{Var}Eval, as
1269 that will trash the result. strdup the result instead and pass
1270 that on. Improve error handling as well.
1272 * gdbtk.tcl (gdbtk_tcl_flush): Use global def of
1273 current_output_win. Makes flushing actually work!
1274 * (asm_win_name create_asm_win update_assembly): Bunch of fixes
1275 to make assembly windows stop flashing when loading a new file.
1276 * (gdbtk_tcl_busy gdbtk_tcl_idle): Use catch to prevent gdb_cmd
1277 errors from losing control.
1278 * (create_source_window): Add source file selection to View menu.
1279 * (create_command_window (<Key-Return> binding): Quote text fed
1280 into gdb_cmd to prevent eval errors.
1282 Thu Dec 15 16:40:10 1994 Stu Grossman (grossman@cygnus.com)
1284 * gdbtk.c: Improve mechanism for capturing output values.
1285 (full_filename): Remove.
1286 (gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl land
1287 with call_wrapper. This prevents longjmps (usually via error())
1288 from jumping out of tcl/tk and leaving things in an indeterminate
1290 (gdbtk_fputs): Differentiate stdout from stderr when passing text
1292 * gdbtk.tcl: New view option to disable line numbers. Put catch
1293 around most uses of gdb_cmd. Add update button to reg config
1294 window. Stop doing immediate updates when selecting registers.
1295 Change register view values into checkbuttons.
1297 Mon Dec 12 16:59:29 1994 Stu Grossman (grossman@cygnus.com)
1299 * gdbtk.tcl (reg_config_menu create_registers_window
1300 recompute_reg_display_list): Use array instead of individual vars
1301 for register display list.
1302 * (recompute_reg_display_list update_registers): Fix bug with not
1303 displaying all registers.
1305 Mon Dec 12 12:22:21 1994 Stu Grossman (grossman@cygnus.com)
1307 * gdbtk.c: New tcl commands: gdb_fetch_registers,
1308 gdb_changed_register_list, and gdb_regnames.
1309 * gdbtk.tcl: Use monochrome color model for now.
1310 * (delete_breakpoint_tag create_file_win): Add breakdot support.
1311 * (create_file_win create_asm_win update_listing build_framework
1312 create_source_window create_command_window): Re-org window
1313 creation to give all windows consistent look and feel.
1314 * (update_listing update_asm): Change pc pointer to '->'.
1315 * (registers_command reg_config_menu create_registers_window
1316 populate_reg_window update_registers): Revamp register window.
1317 Allow selection of registers to be displayed. Highlight changed
1320 Mon Nov 28 09:17:20 1994 Stu Grossman (grossman@cygnus.com)
1322 * gdbtk.tcl (build_framework): Fix bug with setting window titles.
1324 * gdbtk.tcl (build_framework): Add "Report bug" to help menu.
1326 * gdbtk.tcl: Re-arrange windows using new, consistent layout. Clean
1327 up lots of code and centralize framework initialization.
1329 Wed Nov 16 15:28:29 1994 Rob Savoye (rob@cygnus.com)
1331 * Makefile.in: Fix the test for installing gdbtk.
1333 Mon Nov 14 08:51:29 1994 Stu Grossman (grossman@cygnus.com)
1335 * Makefile.in: Install gdbtk.tcl.
1336 * configure.in: Add ENABLE_GDBTK flag.
1337 * gdbtk.c (gdb_sourcelines): Returns list of source lines
1338 containing code. (gdb_regnames): Returns list of register names.
1340 Thu Nov 3 14:25:24 1994 Stu Grossman (grossman@cygnus.com)
1342 * gdbtk.c (gdb_stop): Switch to target_stop().
1344 Tue Nov 1 16:41:12 1994 Stu Grossman (grossman@cygnus.com)
1346 * Makefile.in: Use $(objdir)/tcl and $(objdir)/tk if they are
1348 * configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of
1350 * gdbtk.c: Get rid of lots of unnecessary #includes.
1351 * (gdbtk_init): Use ConnectionNumber macro instead of referencing
1352 Display structure directly.
1353 * gdbtk.tcl: Change exit button to quit button.
1355 Wed Oct 26 15:41:07 1994 Stu Grossman (grossman@cygnus.com)
1357 * gdbtk.c: Change sense and name of no_windows variable. Now
1358 called use_windows, and defaults to off (for compatibility).
1360 Thu Oct 20 17:35:45 1994 Stu Grossman (grossman@cygnus.com)
1362 * gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur.
1363 * (gdb_stop): New tcl command to stop the target process.
1364 * (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target
1366 * (gdbtk_call_command): Wrapper around command processing to
1367 alert GUI of target state changes.
1368 * (gdbtk_init): Get the fd of X server for doing async
1369 notification of X events (via x_event). Setup new hooks.
1370 * gdbtk.tcl: Add scrollbars to assembly and command windows.
1371 * Change window foreground & background colors.
1372 * Create margin tag for breakpoints in source and assembly windows.
1373 * Add new routines to be invoked when target state changes to/from
1375 * Add start of expression window.
1376 * Change bindings of mouse button 1 in assembly and source window
1377 to just set or clear breakpoints when in the margin tag.
1378 * Change shape of register window to be more vertical to better
1379 reflect its contents.
1381 * Cleanup some code around command window bindings.
1383 Sat Sep 17 17:05:14 1994 Stu Grossman (grossman@cygnus.com)
1385 * gdbtk.tcl: Let ^U delete lines in the command window.
1387 Fri Sep 16 15:40:34 1994 Stu Grossman (grossman@cygnus.com)
1389 * gdbtk.c: Replace calls to full_filename with symtab_to_filename.
1390 * gdbtk.tcl: New routine pc_to_line replaces in line code. New
1391 routine decr replaces in line code.
1392 * (create_file_win): Use catch to handle open failures more
1393 elegantly. Also, create special window to display file open
1394 failure message. Move opening of file prior to creation of text
1396 * (create_asm_win): Add PC as argument. We now base disassembly
1397 on PC instead of function name, since function names can be
1398 ambiguous (usually seen with shared libs). Also, use catch to
1399 simplify code where we don't care about failures.
1401 Wed Sep 14 00:55:26 1994 Stu Grossman (grossman@cygnus.com)
1403 * gdbtk.tcl: Add ref counts to breakpoint tags.
1404 * Put quotes around function name in disassemble command to better
1405 handle assembler names containing `.'.
1406 * Make pclist element 0 be filler to avoid off-by-one problem with
1408 * Set names of top-level windows.
1409 * Add register display window.
1410 * Add PC to label of assembly window.
1412 Tue Sep 13 08:59:04 1994 Stu Grossman (grossman@cygnus.com)
1414 * gdbtk.c (gdbtk_flush gdbtk_fputs): Buffer up output to make
1415 disassembly more efficient.
1416 * (breakpoint_notify): Include pc in gdbtk_tcl_breakpoint
1418 * (gdb_loc): Include pc in return value. Also, return function
1419 name if arg was specified.
1420 * (gdb_cmd_stub): Call gdb_flush to drain internal GDB buffers
1421 after command completes.
1422 * (gdbtk_init): Improve error handling.
1424 * gdbtk.tcl: Add lots of comments. Clean up code.
1425 * (gdbtk_tcl_fputs): Make output window redirectable.
1426 * Add assembly window, and breapoint support.
1427 * Make button 1 in margin toggle breakpoints.
1428 * Use stippling to indicate breakpoint disabling.
1430 Fri Sep 2 19:11:40 1994 Stu Grossman (grossman@cygnus.com)
1432 * configure.in: Don't symlink to gdbtk.tcl if it's already there.
1434 Thu Jul 28 14:37:36 1994 Stu Grossman (grossman@cygnus.com)
1437 * Makefile.in: Add rule for gdbtk.o.
1438 * configure.in: Add support for --enable-gdbtk.
1439 * gdbtk.c: New file. Contains support routines for TK interface.
1440 * gdbtk.tcl: New file. Implements GUI policy.
1447 version-control: never