gdb/Makefile.dist

   1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # GDB is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 1, or (at your option)
   8 # any later version.
   9
  10 # GDB is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14
  15 # You should have received a copy of the GNU General Public License
  16 # along with GDB; see the file COPYING.  If not, write to
  17 # the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 # Place to install binaries.
  20 bindir=/usr/local/bin
  21
  22 # System V: If you compile gdb with a compiler which uses the coff
  23 # encapsulation feature (this is a function of the compiler used, NOT
  24 # of the m-?.h file selected by config.gdb), you must make sure that
  25 # the GNU nm is the one that is used by munch.
  26
  27 # If you are compiling with GCC, make sure that either 1) You use the
  28 # -traditional flag, or 2) You have the fixed include files where GCC
  29 # can reach them.  Otherwise the ioctl calls in inflow.c and readline.c
  30 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  31 # distribution will fix your include files up.
  32 #CC=cc
  33 #CC=gcc -traditional
  34 GCC=gcc
  35
  36 VPATH=$(srcdir)
  37
  38 # It is also possible that you will need to add -I/usr/include/sys to the
  39 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  40 # is where it should be according to Posix).
  41
  42 YACC=bison -y
  43 # YACC=yacc
  44 SHELL=/bin/sh
  45 MAKE=make
  46
  47 # Set this up with gcc if you have gnu ld and the loader will print out
  48 # line numbers for undefinded refs.
  49 #CC-LD=gcc -static
  50 CC-LD=${CC}
  51
  52 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
  53 # (useful for debugging memory allocation problems in gdb).  To use your
  54 # system malloc, uncomment the following two lines.
  55 #GNU_MALLOC =
  56 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
  57 GNU_MALLOC = gmalloc.o mcheck.o
  58 MALLOC_CFLAGS =
  59
  60 # Where is the "include" directory?  Traditionally ../include or ./include
  61 INCLUDE_DIR =  ${srcdir}/../include
  62 INCLUDE_DEP = $$(INCLUDE_DIR)
  63
  64 # Where is the BFD library?  Traditionally ../bfd or ./bfd
  65 BFD_DIR =  ${srcdir}/../bfd
  66 BFD_DEP = $$(BFD_DIR)
  67
  68 # All the includes used for CFLAGS and for lint.
  69 # -I. for config files.
  70 # -I${srcdir} for <obstack.h>, possibly regex.h also.
  71 INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I${srcdir}/vx-share
  72
  73 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
  74 # CFLAGS for both GDB and readline.
  75 GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
  76 #PROFILE_CFLAGS = -pg
  77
  78 CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
  79 # None of the things in CFLAGS will do any harm, and on some systems
  80 #  (e.g. SunOS4) it is important to use the M_CFLAGS.
  81 LDFLAGS = $(CFLAGS)
  82
  83 # define this to be "obstack.o" if you don't have the obstack library installed
  84 # so that the dependencies work right.
  85 OBSTACK = obstack.o
  86
  87 # Requires GNU getopt_long features.
  88 GETOPT = getopt.o getopt1.o
  89 # Where is the getopt directory?  Traditionally ../getopt or ./getopt
  90 GETOPT_DIR =  ${srcdir}/../getopt
  91 GETOPT_DEP = $$(GETOPT_DIR)
  92
  93 # Flags that describe where you can find the termcap library.
  94 # You may need to make other arrangements for USG.
  95 TERMCAP = -ltermcap
  96
  97 # You must define REGEX and REGEX1 on USG machines.
  98 # If your sysyem is missing alloca(), or, more likely, it's there but
  99 # it doesn't work, define ALLOCA & ALLOCA1
 100
 101 # {X,T}M_CLIBS, if defined, has system-dependent libs
 102 # For example, -lPW for System V to get alloca().
 103 # FIXME STOPGAP FOR BFD LIBRARY: BFD stuff
 104 CLIBS = ${TERMCAP} $(XM_CLIBS) ${TM_CLIBS} ${BFD_DIR}/libbfd.a
 105 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_DIR}/libbfd.a
 106
 107 ADD_FILES = ${OBSTACK} ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${GETOPT}
 108 ADD_DEPS = ${OBSTACK} ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${GETOPT}
 109
 110 VERSION = 3.94.2
 111 DIST=gdb-$(VERSION)
 112
 113 LINT=/usr/5bin/lint
 114 LINTFLAGS=
 115
 116 # Source files in the main directory.
 117 # Files which are included via a tconfig/* or xconfig/* file
 118 # should *not* be specified here; they're in "ALLDEPFILES".
 119 SFILES_MAINDIR = \
 120          blockframe.c breakpoint.c command.c core.c \
 121          environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
 122          main.c printcmd.c \
 123          remote.c source.c stack.c symmisc.c symtab.c symfile.c \
 124          utils.c valarith.c valops.c valprint.c values.c expread.y \
 125          signame.c cplus-dem.c mem-break.c target.c inftarg.c \
 126          dbxread.c coffread.c \
 127          ieee-float.c
 128
 129 # Source files in subdirectories (which will be handled separately by
 130 #  'make gdb.tar.Z').
 131 # Files which are included via a tconfig/* or xconfig/* file
 132 # should *not* be specified here; they're in "ALLDEPFILES".
 133 SFILES_SUBDIR = \
 134          ${srcdir}/vx-share/dbgRpcLib.h \
 135          ${srcdir}/vx-share/ptrace.h \
 136          ${srcdir}/vx-share/reg.h \
 137          ${srcdir}/vx-share/vxTypes.h \
 138          ${srcdir}/vx-share/vxWorks.h \
 139          ${srcdir}/vx-share/wait.h \
 140          ${srcdir}/vx-share/xdr_ld.h \
 141          ${srcdir}/vx-share/xdr_ptrace.h \
 142          ${srcdir}/vx-share/xdr_rdb.h \
 143          ${srcdir}/vx-share/xdr_regs.h \
 144          ${srcdir}/nindy-share/Makefile \
 145          ${srcdir}/nindy-share/VERSION \
 146          ${srcdir}/nindy-share/b.out.h \
 147          ${srcdir}/nindy-share/block_io.h \
 148          ${srcdir}/nindy-share/coff.h \
 149          ${srcdir}/nindy-share/demux.h \
 150          ${srcdir}/nindy-share/env.h \
 151          ${srcdir}/nindy-share/stop.h \
 152          ${srcdir}/nindy-share/ttycntl.h
 153
 154 # All source files that go into linking GDB, except config-specified files.
 155 SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
 156
 157 # All source files that lint should look at
 158 LINTFILES = $(SFILES) expread.tab.c init.c
 159
 160 # Any additional files specified on these lines should also be added to
 161 # the OTHERS = definition below, so they go in the tar files.
 162 SFILES_STAND = $(SFILES) standalone.c
 163 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 164
 165 # Header files that are not named in tconfig/* or xconfig/* go here.
 166 HFILES= breakpoint.h command.h defs.h environ.h \
 167         expression.h frame.h gdbcmd.h gdbcore.h \
 168         getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
 169         signals.h signame.h symfile.h symtab.h \
 170         target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
 171         value.h
 172
 173 OPCODES = pn-opcode.h np1-opcode.h sparc-opcode.h vax-opcode.h m68k-opcode.h \
 174           ns32k-opcode.h convex-opcode.h pyr-opcode.h mips-opcode.h \
 175           am29k-opcode.h
 176
 177 REMOTE_EXAMPLES = remote-sa.m68k.shar remote-multi.shar
 178
 179 MALLOCSRC = gmalloc.c mcheck.c ansidecl.h stdlib.h gmalloc.h stddef.h
 180 GETOPTSRC = $(GETOPT_DIR)/getopt.c $(GETOPT_DIR)/getopt1.c
 181
 182 POSSLIBS_MAINDIR = obstack.h obstack.c regex.c regex.h alloca.c \
 183         $(MALLOCSRC)
 184 POSSLIBS = $(POSSLIBS_MAINDIR) $(GETOPTSRC)
 185
 186 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 187
 188 # tdesc-lib cannot be named simply tdesc, because if if it were GNU make
 189 # would try to make it from tdesc.c.
 190 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
 191 OTHERS = Makefile.dist depend alldeps.mak Makefile.srcdir \
 192          createtags munch config.gdb config.status \
 193          ChangeLog ChangeLog-3.x \
 194          README TODO TAGS WHATS.NEW \
 195          gdb.texinfo gdb-int.texinfo gdbrc.tex threecol.tex \
 196         .gdbinit COPYING expread.tab.c stab.def \
 197          copying.c Projects Convex.notes copying.awk \
 198          saber.suppress standalone.c stuff.c kdb-start.c \
 199          hp-include # tests
 200
 201 DEPFILES= ${TDEPFILES} ${XDEPFILES}
 202
 203 SOURCES=$(SFILES) $(ALLDEPFILES)
 204 TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
 205 TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
 206              ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
 207 TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
 208
 209 OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 210     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 211     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 212     command.o utils.o expread.o expprint.o environ.o version.o \
 213     copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
 214     inftarg.o ieee-float.o \
 215     dbxread.o coffread.o # mipsread.o
 216
 217 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 218
 219 TSOBS = core.o inflow.o
 220
 221 NTSOBS = standalone.o
 222
 223 TSSTART = /lib/crt0.o
 224
 225 NTSSTART = kdb-start.o
 226
 227 RL_LIB = readline/libreadline.a
 228 RL_LIB_DEP = $(RL_LIB)
 229
 230 # Prevent Sun make from putting in the machine type.  Setting
 231 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 232 .c.o:
 233         ${CC} -c ${CFLAGS} $<
 234
 235 all: gdb
 236
 237 install: gdb
 238         cp gdb $(bindir)/gdb.new
 239         mv $(bindir)/gdb.new $(bindir)/gdb
 240         $(M_INSTALL)
 241
 242 init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
 243         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 244
 245 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB_DEP} ${CDEPS} init.o
 246         ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
 247         ${RL_LIB} $(CLIBS)
 248
 249 saber_gdb: $(SFILES) $(GETOPTSRC) $(DEPFILES) copying.c obstack.c version.c
 250         #setopt load_flags $(CFLAGS) -I$(BFD_DIR)
 251         #load ./init.c $(SFILES)
 252         #unload ${srcdir}/expread.y
 253         #load ${srcdir}/expread.tab.c readline/libreadline.a
 254         #load copying.c version.c
 255         #load obstack.c $(GETOPTSRC)
 256         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 257         #load ${BFD_DIR}/libbfd.a -ltermcap
 258         ##void mcheck(a) void (*a)(); { }
 259
 260
 261
 262 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 263 # on itself without copying the executable.  So "make gdb1" will make
 264 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 265 # Removing gdb1 before the copy is the right thing if gdb1 is open
 266 # in another process.
 267 gdb1: gdb
 268         rm -f gdb1
 269         cp gdb gdb1
 270
 271 # This is a remote stub which runs under unix and starts up an
 272 # inferior process.  This is at least useful for debugging GDB's
 273 # remote support.
 274 rapp: $(RAPP_OBS)
 275         rm -f rapp_init.c
 276         ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
 277         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 278
 279 Makefiles= Makefile.srcdir $(M_MAKEFILE) \
 280         ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
 281
 282 MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
 283         cat - ${Makefiles} ${srcdir}/depend >Makefile
 284
 285 Makefile: $(Makefiles)
 286         $(MAKE_MAKEFILE)
 287
 288 alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
 289         rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
 290         for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
 291           ${srcdir}/xconfig/*[0-9A-Za-z] | grep -v RCS` ; do \
 292           echo $$i >>allconfig.tmp; \
 293           awk <$$i ' \
 294             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
 295               for (i = 2; i <= NF; i++) \
 296                 print $$i >> "alldeps.tmp" ; \
 297             } \
 298             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
 299               print $$2 >> "allparam.tmp" }' ; \
 300         done
 301         sort <alldeps.tmp | uniq | \
 302           sed -e 's/arm-convert.o/arm-convert.s/' \
 303               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 304               -e 's!^nindy.o!nindy-share/nindy.c!' \
 305               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 306               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 307               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 308               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 309               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 310               -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
 311               -e 's/\.o/.c/' \
 312             >alldeps2.tmp
 313         echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
 314             >>alldeps.mak;
 315         grep -v / alldeps2.tmp | \
 316           awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
 317             NR == 0 {printf $$0;} \
 318             NR != 0 {printf "\\\n" $$0} \
 319             END {printf "\n\n"}' >>alldeps.mak;
 320         grep / alldeps2.tmp | \
 321           awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
 322             NR == 0 {printf $$0;} \
 323             NR != 0 {printf "\\\n" $$0} \
 324             END {printf "\n\n"}' >>alldeps.mak;
 325         sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 326             NR == 0 {printf $$0;} \
 327             NR != 0 {printf "\\\n" $$0} \
 328             END {printf "\n\n"}' >>alldeps.mak;
 329         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 330             NR == 0 {printf $$0;} \
 331             NR != 0 {printf "\\\n" $$0} \
 332             END {printf "\n\n"}' >>alldeps.mak;
 333         rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
 334
 335 # The sed script makes everything which depends on {x,t}m.h depend on
 336 # config.status as well, in case someone reconfigures gdb out from
 337 # under an already compiled gdb.
 338 depend: $(SOURCES) Makefile.dist
 339         @echo Ignore errors about non-existent system-supplied include files
 340         @echo for systems other than the one you are using.
 341         @echo "If xm.h and tm.h don't exist, the error messages saying so"
 342         @echo can safely be ignored.
 343         @echo Also ignore parse errors in valops.c, and any errors in
 344         @echo arm-convert.s.
 345         -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
 346             `ls $(SOURCES) | sort -u` >depend.tmp
 347         <depend.tmp sed -e 's/ [xt]m.h/& config.status/g'  \
 348           -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 349           -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 350           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 351           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 352           -e 's; [a-z0-9./]*getopt/; $(GETOPT_DEP)/;g'  \
 353           -e 's; \./; $${srcdir}/;g'  \
 354           >depend
 355         $(MAKE_MAKEFILE)
 356         rm depend.tmp
 357
 358 config.status:
 359         @echo "You must configure gdb.  Look at the README file for details."
 360         @false
 361
 362 # These are not generated by "make depend" because they only are there
 363 # for some machines.
 364 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
 365 tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
 366 xm-news1000.h : xm-news.h
 367 xm-i386-sv32.h : xm-i386.h
 368 tm-i386gas.h: tm-i386.h
 369 xm-sun4os4.h : xm-sparc.h
 370 tm-sun4os4.h : tm-sparc.h
 371
 372 kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB_DEP}
 373         rm -f init.c
 374         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 375         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 376         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 377         ${RL_LIB} -lc $(CLIBS)
 378
 379 # Put the proper machine-specific files first.
 380 # createtags will edit the .o in DEPFILES into .c
 381 TAGS: ${TAGFILES}
 382         $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
 383 tags: TAGS
 384
 385 # FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
 386 gdb.tar.Z: ${TARFILES}
 387         rm -f gdb.tar; rm -rf $(DIST)
 388         cd readline ; make readline.tar
 389         mkdir $(DIST)
 390         cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
 391         mkdir $(DIST)/readline
 392         cd $(DIST)/readline ; tar xf ../../readline/readline.tar
 393         mkdir $(DIST)/xconfig ${DIST}/tconfig
 394         cd $(DIST)/tconfig ; \
 395           for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
 396         mkdir $(DIST)/vx-share $(DIST)/nindy-share
 397         cd $(DIST)/tconfig ; \
 398           for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
 399             do ln -s ../../$$i ../$$i ; done
 400         tar chf - $(DIST) | compress >gdb.tar.Z
 401         rm -rf $(DIST)
 402
 403 clean:
 404         rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
 405         rm -f init.c init.o version.c
 406         rm -f gdb core gdb.tar gdb.tar.Z make.log
 407         rm -f gdb[0-9]
 408         cd readline ; make clean
 409
 410 distclean: clean expread.tab.c TAGS
 411         rm -f tm.h xm.h config.status
 412         rm -f y.output yacc.acts yacc.tmp
 413         rm -f ${TESTS} Makefile
 414
 415 realclean: clean
 416         rm -f expread.tab.c TAGS
 417         rm -f tm.h xm.h config.status
 418         rm -f Makefile
 419
 420 gdb.dvi : gdb.texinfo
 421         tex gdb.texinfo
 422         texindex gdb.??
 423         tex gdb.texinfo
 424
 425 # Make copying.c from COPYING
 426 copying.c : COPYING copying.awk
 427         awk -f copying.awk < COPYING > copying.c
 428
 429 version.c : Makefile.dist
 430         echo 'char *version = "$(VERSION)";' >version.c
 431
 432 ${srcdir}/expread.tab.c : $(srcdir)/expread.y
 433         @echo 'Expect 4 shift/reduce conflict.'
 434         ${YACC} $(srcdir)/expread.y
 435         mv y.tab.c ${srcdir}/expread.tab.c
 436
 437 expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
 438             frame.h expression.h
 439         $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
 440         mv expread.tab.o expread.o
 441
 442 # dbxread, coffread, mipsread have dependencies on BFD header files.
 443 dbxread.o: ${srcdir}/dbxread.c
 444         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
 445
 446 coffread.o: ${srcdir}/coffread.c
 447         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
 448
 449 mipsread.o: ${srcdir}/mipsread.c
 450         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
 451
 452 # Drag in the files that are in another directory.
 453
 454 getopt1.o: $(GETOPT_DIR)/getopt1.c
 455         ${CC} -c ${CFLAGS} $(GETOPT_DIR)/getopt1.c
 456
 457 getopt.o: $(GETOPT_DIR)/getopt.c
 458         ${CC} -c ${CFLAGS} $(GETOPT_DIR)/getopt.c
 459
 460 xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
 461         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
 462
 463 xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
 464         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
 465
 466 xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
 467         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
 468
 469 xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
 470         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
 471
 472 nindy.o: ${srcdir}/nindy-share/nindy.c
 473         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
 474
 475 Onindy.o: ${srcdir}/nindy-share/Onindy.c
 476         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
 477
 478 ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
 479         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
 480
 481 ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
 482         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
 483
 484 tdesc-lib/libdc.o : force_update
 485         cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
 486
 487 # In LOCAL_INCLUDES, -I${srcdir} is right if srcdir is an absolute path,
 488 # and -I../${srcdir} is right if it is relative (e.g. ".."), so search both.
 489 readline/libreadline.a : force_update
 490         cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}"\
 491                 "VPATH=${srcdir}/readline:../${srcdir}/readline"\
 492                 "LOCAL_INCLUDES=-I../ -I${srcdir}/ -I../${srcdir}/"\
 493                 "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a
 494
 495 lint: $(LINTFILES)
 496         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
 497
 498 gdb.cxref: $(SFILES)
 499         cxref -I. $(SFILES) >gdb.cxref
 500
 501 force_update :
 502
 503 # When used with GDB, the demangler should never look for leading underscores
 504 # because GDB strips them off during symbol read-in.  Thus -Dnounderscore.
 505 cplus-dem.o : cplus-dem.c
 506         ${CC} -c -Dnounderscore `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`