1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
3 # Free Software Foundation, Inc.
5 # This file is part of GDB.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 3 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program. If not, see <http://www.gnu.org/licenses/>.
21 exec_prefix = @
exec_prefix@
23 host_alias
= @host_alias@
24 target_alias
= @target_alias@
25 program_transform_name
= @program_transform_name@
28 tooldir
= $(libdir)/$(target_alias
)
31 localedir
= @localedir@
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
43 datarootdir
= @datarootdir@
47 includedir = @
includedir@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_DATA
= @INSTALL_DATA@
79 # If you are compiling with GCC, make sure that either 1) You have the
80 # fixed include files where GCC can reach them, or 2) You use the
81 # -traditional flag. Otherwise the ioctl calls in inflow.c
82 # will be incorrectly compiled. The "fixincludes" script in the gcc
83 # distribution will fix your include files up.
86 # Dependency tracking information.
89 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
91 # Note that these are overridden by GNU make-specific code below if
92 # GNU make is used. The overrides implement dependency tracking.
94 COMPILE.post
= -c
-o
$@
95 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
98 # Directory containing source files.
104 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
105 # not defined, but ada-lex.c is present, compilation will continue,
106 # possibly with a warning.
109 YLWRAP
= $(srcdir)/..
/ylwrap
111 # where to find makeinfo, preferably one designed for texinfo-2
114 MAKEHTML
= $(MAKEINFO
) --html
117 # Set this up with gcc if you have gnu ld and the loader will print out
118 # line numbers for undefined references.
122 # Where is our "include" directory? Typically $(srcdir)/../include.
123 # This is essentially the header file directory for the library
124 # routines in libiberty.
125 INCLUDE_DIR
= $(srcdir)/..
/include
126 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
128 # Where is the "-liberty" library? Typically in ../libiberty.
129 LIBIBERTY
= ..
/libiberty
/libiberty.a
131 # Where is the BFD library? Typically in ../bfd.
133 BFD
= $(BFD_DIR
)/libbfd.a
134 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
135 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
137 # Where is the decnumber library? Typically in ../libdecnumber.
138 LIBDECNUMBER_DIR
= ..
/libdecnumber
139 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
140 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
141 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
143 # Where is the READLINE library? Typically in ../readline.
144 READLINE_DIR
= ..
/readline
145 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
146 READLINE
= @READLINE@
147 READLINE_DEPS
= @READLINE_DEPS@
148 READLINE_CFLAGS
= @READLINE_CFLAGS@
150 # Where is expat? This will be empty if expat was not available.
151 LIBEXPAT
= @LIBEXPAT@
153 WARN_CFLAGS
= @WARN_CFLAGS@
154 WERROR_CFLAGS
= @WERROR_CFLAGS@
155 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
156 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
158 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
160 # Where is the INTL library? Typically in ../intl.
162 INTL_DEPS
= @LIBINTL_DEP@
163 INTL_CFLAGS
= @INCINTL@
165 # Did the user give us a --with-sysroot option?
166 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
167 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
169 # Did the user give us a --with-gdb-datadir option?
170 GDB_DATADIR
= @GDB_DATADIR@
172 # Helper code from gnulib.
173 LIBGNU
= gnulib
/libgnu.a
174 INCGNU
= -I
$(srcdir)/gnulib
-Ignulib
176 # Generated headers in the gnulib directory. These must be listed
177 # so that they are generated before other files are compiled.
178 GNULIB_H
= gnulib
/string.h @GNULIB_STDINT_H@
181 # CLI sub directory definitons
185 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
190 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
198 # MI sub directory definitons
201 mi-out.o mi-console.o \
202 mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
203 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
205 mi-main.o mi-parse.o mi-getopt.o mi-common.o
207 mi
/mi-out.c mi
/mi-console.c \
208 mi
/mi-cmds.c mi
/mi-cmd-env.c \
209 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
210 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
211 mi
/mi-cmd-target.c mi
/mi-interp.c \
212 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c mi
/mi-common.c
219 # TUI sub directory definitions
222 # Name of the TUI program
257 tui
/tui-wingeneral.c \
258 tui
/tui-winsource.c \
266 # python sub directory definitons
268 SUBDIR_PYTHON_OBS
= \
278 SUBDIR_PYTHON_SRCS
= \
282 python
/py-function.c \
283 python
/py-objfile.c \
284 python
/py-prettyprint.c \
289 SUBDIR_PYTHON_LDFLAGS
=
290 SUBDIR_PYTHON_CFLAGS
=
293 # Opcodes currently live in one of two places. Either they are in the
294 # opcode library, typically ../opcodes, or they are in a header file
296 # Where is the "-lopcodes" library, with (some of) the opcode tables and
298 OPCODES_DIR
= ..
/opcodes
299 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
300 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
301 # Where are the other opcode tables which only have header file
303 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
304 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
)
306 # The simulator is usually nonexistent; targets that include one
307 # should set this to list all the .o or .a files to be linked in.
310 WIN32LIBS
= @WIN32LIBS@
312 # Tcl et al cflags and libraries
314 TCL_CFLAGS
= @TCL_INCLUDE@
315 GDBTKLIBS
= @GDBTKLIBS@
316 # Extra flags that the GDBTK files need:
317 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
320 TK_CFLAGS
= @TK_INCLUDE@
322 X11_CFLAGS
= @TK_XINCLUDES@
326 WIN32LDAPP
= @WIN32LDAPP@
329 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
330 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
332 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
334 # The version of gdbtk we're building. This should be kept
335 # in sync with GDBTK_VERSION and friends in gdbtk.h.
337 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
339 # Gdbtk requires an absolute path to the source directory or
340 # the testsuite won't run properly.
341 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
344 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
345 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
346 SUBDIR_GDBTK_SRCS
= \
347 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
348 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
349 gdbtk
/generic
/gdbtk-interp.c \
350 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
351 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
352 gdbtk
/generic
/gdbtk-main.c
353 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
354 SUBDIR_GDBTK_LDFLAGS
=
355 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
357 CONFIG_OBS
= @CONFIG_OBS@
358 CONFIG_SRCS
= @CONFIG_SRCS@
359 CONFIG_DEPS
= @CONFIG_DEPS@
360 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
361 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
362 CONFIG_ALL
= @CONFIG_ALL@
363 CONFIG_CLEAN
= @CONFIG_CLEAN@
364 CONFIG_INSTALL
= @CONFIG_INSTALL@
365 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
367 # -I. for config files.
368 # -I$(srcdir) for gdb internal headers.
369 # -I$(srcdir)/config for more generic config files.
371 # It is also possible that you will need to add -I/usr/include/sys if
372 # your system doesn't have fcntl.h in /usr/include (which is where it
373 # should be according to Posix).
375 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
376 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
378 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
379 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
381 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
383 # CFLAGS is specifically reserved for setting from the command line
384 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
387 # Set by configure, for e.g. expat.
388 INTERNAL_CPPFLAGS
= @CPPFLAGS@
390 # Need to pass this to testsuite for "make check". Probably should be
391 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
392 # so "make check" has the same result no matter where it is run.
395 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
396 INTERNAL_CFLAGS_BASE
= \
397 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
398 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
399 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
400 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
401 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
402 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
404 # LDFLAGS is specifically reserved for setting from the command line
408 # Profiling options need to go here to work.
409 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
410 # and have it work; that's why CFLAGS is here.
411 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
412 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
414 # If your system is missing alloca(), or, more likely, it's there but
415 # it doesn't work, then refer to libiberty.
417 # Libraries and corresponding dependencies for compiling gdb.
418 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
419 # LIBIBERTY appears twice on purpose.
420 # If you have the Cygnus libraries installed,
421 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
422 INSTALLED_LIBS
=-lbfd
-lreadline
-lopcodes
-liberty
-ldecnumber \
423 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
424 -lintl
-liberty
$(LIBGNU
)
425 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
426 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
428 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
429 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
430 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
432 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
433 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
438 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
439 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
445 # XML files to build in to GDB.
446 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
447 $(srcdir)/features
/library-list.dtd
$(srcdir)/features
/osdata.dtd
449 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
450 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
451 # etc., then there will be (as part of the C library or perhaps as
452 # part of libiberty) a POSIX interface. But at least for now the
453 # host-dependent makefile fragment might need to use something else
455 SER_HARDWIRE
= @SER_HARDWIRE@
457 # The `remote' debugging target is supported for most architectures,
458 # but not all (e.g. 960)
459 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
461 # This is remote-sim.o if a simulator is to be linked in.
464 # Target-dependent object files.
465 TARGET_OBS
= @TARGET_OBS@
467 # All target-dependent objects files that require 64-bit CORE_ADDR
468 # (used with --enable-targets=all --enable-64-bit-bfd).
469 ALL_64_TARGET_OBS
= \
470 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
471 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
472 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
473 amd64-linux-tdep.o amd64nbsd-tdep.o \
474 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
475 ia64-linux-tdep.o ia64-tdep.o \
477 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
478 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
480 # All other target-dependent objects files (used with --enable-targets=all).
482 armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
483 arm-tdep.o arm-wince-tdep.o \
487 frv-linux-tdep.o frv-tdep.o \
489 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
490 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
491 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
492 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
493 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
494 i386-dicos-tdep.o i386-darwin-tdep.o \
499 m32r-linux-tdep.o m32r-tdep.o \
501 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
504 microblaze-tdep.o microblaze-linux-tdep.o \
505 mips-irix-tdep.o mips-linux-tdep.o \
506 mipsnbsd-tdep.o mips-tdep.o \
507 mn10300-linux-tdep.o mn10300-tdep.o \
511 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
512 rs6000-aix-tdep.o rs6000-tdep.o \
515 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
516 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
517 sparc-sol2-tdep.o sparc-tdep.o \
518 spu-tdep.o spu-multiarch.o solib-spu.o \
520 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
522 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
525 nbsd-tdep.o obsd-tdep.o \
527 solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
528 solib-som.o solib-pa64.o solib-darwin.o \
529 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
537 # Host-dependent makefile fragment comes in here.
539 # End of host-dependent makefile fragment
543 "exec_prefix=$(exec_prefix)" \
544 "infodir=$(infodir)" \
545 "datarootdir=$(datarootdir)" \
547 "htmldir=$(htmldir)" \
551 "datadir=$(datadir)" \
552 "includedir=$(includedir)" \
553 "against=$(against)" \
554 "DESTDIR=$(DESTDIR)" \
556 "AR_FLAGS=$(AR_FLAGS)" \
560 "CXXFLAGS=$(CXXFLAGS)" \
561 "DLLTOOL=$(DLLTOOL)" \
562 "LDFLAGS=$(LDFLAGS)" \
564 "MAKEINFO=$(MAKEINFO)" \
565 "MAKEHTML=$(MAKEHTML)" \
566 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
567 "INSTALL=$(INSTALL)" \
568 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
569 "INSTALL_DATA=$(INSTALL_DATA)" \
570 "RUNTEST=$(RUNTEST)" \
571 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
573 # Flags that we pass when building the testsuite.
575 # empty for native, $(target_alias)/ for cross
576 target_subdir
= @target_subdir@
579 if [ -f $${rootme}/../gcc/xgcc ] ; then \
580 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
581 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
583 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
586 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
589 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
595 if [ -f $${rootme}/../gcc/xgcc ] ; then \
596 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
597 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
599 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
602 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
605 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
609 # The use of $$(x_FOR_TARGET) reduces the command line length by not
610 # duplicating the lengthy definition.
611 TARGET_FLAGS_TO_PASS
= \
613 "exec_prefix=$(exec_prefix)" \
614 "against=$(against)" \
615 'CC=$$(CC_FOR_TARGET)' \
616 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
618 'CXX=$$(CXX_FOR_TARGET)' \
619 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
620 "CXXFLAGS=$(CXXFLAGS)" \
621 "INSTALL=$(INSTALL)" \
622 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
623 "INSTALL_DATA=$(INSTALL_DATA)" \
624 "MAKEINFO=$(MAKEINFO)" \
625 "MAKEHTML=$(MAKEHTML)" \
626 "RUNTEST=$(RUNTEST)" \
627 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
628 "FORCE_PARALLEL=$(FORCE_PARALLEL)"
630 # All source files that go into linking GDB.
631 # Links made at configuration time should not be specified here, since
632 # SFILES is used in building the distribution archive.
634 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
636 auxv.c ax-general.c ax-gdb.c \
639 block.c blockframe.c breakpoint.c buildsym.c \
640 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
641 charset.c cli-out.c coffread.c coff-pe-read.c \
642 complaints.c completer.c corefile.c \
643 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
645 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
646 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
647 elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \
648 f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
649 frame.c frame-base.c frame-unwind.c \
650 gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
653 infcmd.c inflow.c infrun.c \
656 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
657 language.c linespec.c \
658 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
659 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
660 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
661 objc-exp.y objc-lang.c \
662 objfiles.c osabi.c observer.c osdata.c \
663 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
666 regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
667 scm-exp.c scm-lang.c scm-valprint.c \
669 serial.c ser-base.c ser-unix.c \
670 solib.c solib-null.c source.c \
671 stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
673 target.c target-descriptions.c target-memory.c \
674 thread.c top.c tracepoint.c \
678 ui-out.c utils.c ui-file.h ui-file.c \
680 valarith.c valops.c valprint.c value.c varobj.c vec.c \
682 xml-tdesc.c xml-support.c \
683 inferior.c gdb_usleep.c \
688 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
690 # Header files that need to have srcdir added. Note that in the cases
691 # where we use a macro like $(gdbcmd_h), things are carefully arranged
692 # so that each .h file is listed exactly once (M-x tags-search works
693 # wrong if TAGS has files twice). Because this is tricky to get
694 # right, it is probably easiest just to list .h files here directly.
696 HFILES_NO_SRCDIR
= osf-share
/cma_debug_client.h \
697 osf-share
/HP800
/cma_thread_io.h osf-share
/cma_sequence.h \
698 osf-share
/cma_mutex.h osf-share
/cma_semaphore_defs.h \
699 osf-share
/cma_list.h osf-share
/cma_handle.h osf-share
/cma_stack.h \
700 osf-share
/cma_util.h osf-share
/RIOS
/cma_thread_io.h \
701 osf-share
/cma_errors.h osf-share
/cma_tcb_defs.h osf-share
/cma_attr.h \
702 osf-share
/cma_stack_int.h osf-share
/cma_init.h \
703 osf-share
/cma_deb_core.h osf-share
/AT386
/cma_thread_io.h \
704 osf-share
/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
705 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h gnu-v2-abi.h \
706 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
707 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
708 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
709 c-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
710 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-dump.h \
711 cli
/cli-script.h macrotab.h symtab.h version.h gnulib
/wchar.in.h \
712 gnulib
/string.in.h gnulib
/str-two-way.h gnulib
/extra
/link-warning.h \
713 gnulib
/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver
/win32-low.h \
714 gdbserver
/i387-fp.h gdbserver
/server.h gdbserver
/terminal.h \
715 gdbserver
/mem-break.h gdbserver
/wincecompat.h gdbserver
/target.h \
716 gdbserver
/linux-low.h gdbserver
/gdb_proc_service.h \
717 gdbserver
/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
718 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
719 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
720 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
721 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
722 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
723 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
724 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
725 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
726 solib-target.h shnbsd-tdep.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
727 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
728 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
729 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
730 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
731 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
732 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
733 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
734 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
735 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
736 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
737 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
738 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
739 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
740 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
741 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
742 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
743 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
744 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
745 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
746 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
747 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
748 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
749 config
/i386
/nm-fbsd.h config
/i386
/nm-i386sol2.h config
/i386
/nm-linux.h \
750 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
751 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
752 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
753 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
754 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
755 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h
757 # Header files that already have srcdir in them, or which are in objdir.
759 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h
762 # GDB "info" files, which should be included in their entirety
763 INFOFILES
= gdb.
info*
765 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
767 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
768 # default their values the way we do for SER_HARDWIRE; in the future
769 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
770 # variables analogous to SER_HARDWIRE which get defaulted in this
773 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
774 $(REMOTE_OBS
) $(SIM_OBS
)
776 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
777 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
778 # and it's more useful to see it in the .y file.
779 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
781 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
783 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
789 blockframe.o breakpoint.o findvar.o regcache.o \
790 charset.o disasm.o dummy-frame.o dfp.o \
791 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
792 block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
795 expprint.o environ.o stack.o thread.o \
800 macrotab.o macrocmd.o macroexp.o macroscope.o \
801 event-loop.o event-top.o inf-loop.o completer.o \
802 gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
803 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
808 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
809 dbxread.o coffread.o coff-pe-read.o \
810 dwarf2read.o mipsread.o stabsread.o corefile.o \
811 dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
812 ada-lang.o c-lang.o f-lang.o objc-lang.o \
815 varobj.o vec.o wrapper.o \
816 jv-lang.o jv-valprint.o jv-typeprint.o \
817 m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
818 scm-exp.o scm-lang.o scm-valprint.o \
820 complaints.o typeprint.o \
821 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
822 ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
823 serial.o mdebugread.o top.o utils.o \
826 frame.o frame-unwind.o doublest.o \
829 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
831 reggroups.o regset.o \
834 solib.o solib-null.o \
835 prologue-value.o memory-map.o xml-support.o xml-syscall.o \
836 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
837 inferior.o osdata.o gdb_usleep.o record.o \
840 # Definitions for the syscall's XML files and dir
841 XML_SYSCALLS_DIR
= syscalls
/
842 XML_SYSCALLS_FILES
= gdb-syscalls.dtd \
843 ppc-linux.xml ppc64-linux.xml \
844 i386-linux.xml amd64-linux.xml
849 CLEANDIRS
= $(SUBDIRS
) gnulib
851 # For now, shortcut the "configure GDB for fewer languages" stuff.
858 f-exp.c m2-exp.c p-exp.c
864 f-exp.o m2-exp.o p-exp.o
866 # Things which need to be built when making a distribution.
868 DISTSTUFF
= $(YYFILES
)
871 # All generated files which can be included by another file.
872 generated_files
= config.h observer.h observer.inc ada-lex.c \
873 $(GNULIB_H
) $(NAT_GENERATED_FILES
)
879 all: gdb
$(EXEEXT
) $(CONFIG_ALL
) xml-syscall-copy
880 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
882 all-tui
: $(TUI
)$(EXEEXT
)
884 # This is needed for running GDB from the build directory
885 .PHONY
: xml-syscall-copy
887 if
[ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
888 mkdir
-p .
/$(XML_SYSCALLS_DIR
) ; \
889 list
='$(XML_SYSCALLS_FILES)' ; \
890 for file in
$$list ; do \
891 f
=$(srcdir)/$(XML_SYSCALLS_DIR
)/$$file ; \
892 if
test -f
$$f ; then \
893 $(INSTALL_DATA
) $$f \
894 .
/$(XML_SYSCALLS_DIR
) ; \
899 # This target is responsible for properly installing the syscalls'
900 # XML files in the system.
901 .PHONY
: xml-syscall-install
903 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
904 $(DESTDIR
)$(GDB_DATADIR
)/$(XML_SYSCALLS_DIR
) ; \
905 list
='$(XML_SYSCALLS_FILES)' ; \
906 for file in
$$list ; do \
907 f
=$(srcdir)/$(XML_SYSCALLS_DIR
)/$$file ; \
908 if
test -f
$$f ; then \
909 $(INSTALL_DATA
) $$f \
910 $(DESTDIR
)$(GDB_DATADIR
)/$(XML_SYSCALLS_DIR
) ; \
916 # The check target can not use subdir_do, because subdir_do does not
917 # use TARGET_FLAGS_TO_PASS.
919 @if
[ -f testsuite
/Makefile
]; then \
920 rootme
=`pwd`; export rootme
; \
921 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
923 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
926 # The idea is to parallelize testing of multilibs, for example:
927 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
928 # will run 3 concurrent sessions of check, eventually testing all 10
929 # combinations. GNU make is required for the % pattern to work, as is
930 # a shell that expands alternations within braces. If GNU make is not
931 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
932 # prevent serialized checking due to the passed RUNTESTFLAGS.
933 # FIXME: use config.status --config not --version, when available.
935 @if
[ -f testsuite
/config.status
]; then \
936 rootme
=`pwd`; export rootme
; \
937 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
938 target
=`echo "$@" | sed 's,//.*,,'`; \
939 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
940 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
941 testdir
=testsuite.
$$vardots; \
942 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
943 configargs
=`cd testsuite && ./config.status --version | \
944 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
945 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
947 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
948 "\"--srcdir=\$$rootsrc/testsuite\"" \
950 else :; fi
&& cd
$$testdir && \
951 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
952 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
953 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
957 info install-info clean-info
dvi pdf install-pdf html install-html
: force
958 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
961 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
962 pack gdb.t
; rm -f gdb.t
965 # Traditionally "install" depends on "all". But it may be useful
966 # not to; for example, if the user has made some trivial change to a
967 # source file and doesn't care about rebuilding or just wants to save the
968 # time it takes for make to check that all is up to date.
969 # install-only is intended to address that need.
970 install: all install-only
972 # The "install-only" target also installs the syscalls' XML files in
974 install-only
: $(CONFIG_INSTALL
) xml-syscall-install
975 transformed_name
=`t='$(program_transform_name)'; \
976 echo gdb | sed -e "$$t"` ; \
977 if
test "x$$transformed_name" = x
; then \
978 transformed_name
=gdb
; \
982 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
983 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
984 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
985 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
986 $(DESTDIR
)$(man1dir) ; \
987 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
988 $(DESTDIR
)$(man1dir)/$$transformed_name.1
989 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
992 transformed_name
=`t='$(program_transform_name)'; \
993 echo $(TUI) | sed -e "$$t"` ; \
994 if
test "x$$transformed_name" = x
; then \
995 transformed_name
=$(TUI
) ; \
999 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1000 $(INSTALL_PROGRAM
) $(TUI
)$(EXEEXT
) \
1001 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1002 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1003 $(DESTDIR
)$(man1dir) ; \
1004 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1005 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1008 uninstall: force $(CONFIG_UNINSTALL
)
1009 transformed_name
=`t='$(program_transform_name)'; \
1010 echo gdb | sed -e $$t` ; \
1011 if
test "x$$transformed_name" = x
; then \
1012 transformed_name
=gdb
; \
1016 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1017 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1018 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1019 .PHONY
: uninstall-tui
1021 transformed_name
=`t='$(program_transform_name)'; \
1022 echo $(TUI) | sed -e $$t` ; \
1023 if
test "x$$transformed_name" = x
; then \
1024 transformed_name
=$(TUI
) ; \
1028 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1029 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1031 # The C++ name parser can be built standalone for testing.
1032 test-cp-name-parser.o
: cp-name-parser.c
1033 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1036 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1037 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1038 test-cp-name-parser.o
$(LIBIBERTY
)
1040 # We do this by grepping through sources. If that turns out to be too slow,
1041 # maybe we could just require every .o file to have an initialization routine
1042 # of a given name (top.o -> _initialize_top, etc.).
1044 # Formatting conventions: The name of the _initialize_* routines must start
1045 # in column zero, and must not be inside #if.
1047 # Note that the set of files with init functions might change, or the names
1048 # of the functions might change, so this files needs to depend on all the
1049 # object files that will be linked into gdb.
1051 # FIXME: There is a problem with this approach - init.c may force
1052 # unnecessary files to be linked in.
1054 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1055 # the first call is to _initialize_gdbtypes (implemented by explicitly
1056 # putting that function's name first in the init.l-tmp file). This is
1057 # a hack to ensure that all the architecture dependant global
1058 # builtin_type_* variables are initialized before anything else
1059 # (per-architecture code is called in the same order that it is
1060 # registered). The ``correct fix'' is to have all the builtin types
1061 # made part of the architecture and initialize them on-demand (using
1062 # gdbarch_data) just like everything else. The catch is that other
1063 # modules still take the address of these builtin types forcing them
1064 # to be variables, sigh!
1066 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1067 # anchored on the first column and excludes the ``/'' character so
1068 # that it doesn't add the $(srcdir) prefix to any file that already
1069 # has an absolute path. It turns out that $(DEC)'s True64 make
1070 # automatically adds the $(srcdir) prefixes when it encounters files
1071 # in sub-directories such as cli/ and mi/.
1073 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1074 # duplicates. Files in the gdb/ directory can end up appearing in
1075 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1077 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1078 init.c
: $(INIT_FILES
)
1080 @
rm -f init.c-tmp init.l-tmp
1082 @echo gdbtypes
> init.l-tmp
1083 @
-LANG
=C
; export LANG
; \
1084 LC_ALL
=C
; export LC_ALL
; \
1085 echo
$(INIT_FILES
) | \
1088 -e
'/^gdbtypes.[co]$$/d' \
1089 -e
'/^init.[co]$$/d' \
1090 -e
'/xdr_ld.[co]$$/d' \
1091 -e
'/xdr_ptrace.[co]$$/d' \
1092 -e
'/xdr_rdb.[co]$$/d' \
1093 -e
'/udr.[co]$$/d' \
1094 -e
'/udip2soc.[co]$$/d' \
1095 -e
'/udi2go32.[co]$$/d' \
1096 -e
'/version.[co]$$/d' \
1097 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1098 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1099 -e
's/\.[co]$$/.c/' \
1100 -e
's,signals\.c,common/signals\.c,' \
1101 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1103 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1108 * ) echo
$$f ; fs
="$$fs $$f";; \
1111 @echo
'/* Do not modify this file. */' >>init.c-tmp
1112 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1113 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1114 @echo
'#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
1115 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1116 @echo
'void' >>init.c-tmp
1117 @echo
'initialize_all_files (void)' >>init.c-tmp
1118 @echo
'{' >>init.c-tmp
1119 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1120 @echo
'}' >>init.c-tmp
1122 @mv init.c-tmp init.c
1126 # Removing the old gdb first works better if it is running, at least on SunOS.
1127 gdb
$(EXEEXT
): gdb.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1129 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1130 -o gdb
$(EXEEXT
) gdb.o libgdb.a \
1131 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1133 $(TUI
)$(EXEEXT
): tui-main.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1134 rm -f
$(TUI
)$(EXEEXT
)
1135 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1136 -o
$(TUI
)$(EXEEXT
) tui-main.o libgdb.a \
1137 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1139 # Convenience rule to handle recursion.
1140 $(LIBGNU
) $(GNULIB_H
): all-lib
1141 all-lib
: gnulib
/Makefile
1142 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=gnulib subdir_do
1145 # Create a library of the gdb object files and build GDB by linking
1148 # init.o is very important. It pulls in the rest of GDB.
1149 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1150 libgdb.a
: $(LIBGDB_OBS
)
1152 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1155 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1156 # on itself without copying the executable. So "make gdb1" will make
1157 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1158 # Removing gdb1 before the copy is the right thing if gdb1 is open
1159 # in another process.
1160 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1162 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1164 # Put the proper machine-specific files first, so M-. on a machine
1165 # specific routine gets the one for the correct machine. (FIXME: those
1166 # files go in twice; we should be removing them from the main list).
1168 # TAGS depends on all the files that go into it so you can rebuild TAGS
1169 # with `make TAGS' and not have to say `rm TAGS' first.
1171 GDB_NM_FILE
= @GDB_NM_FILE@
1172 TAGS
: $(DEPFILES
) $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1174 @etags
$(srcdir)/$(GDB_NM_FILE
) \
1175 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1176 echo $(srcdir)/$$i ; \
1177 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1179 done) | sed -e 's/\.o$$/\.c/'` \
1180 `find $(srcdir)/config -name '*.h' -print`
1184 clean mostlyclean: $(CONFIG_CLEAN
)
1185 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1186 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1187 rm -f init.c version.c
1188 rm -f gdb
$(EXEEXT
) core make.log
1189 rm -f gdb
[0-9]$(EXEEXT
)
1190 rm -f test-cp-name-parser
$(EXEEXT
)
1191 rm -f xml-builtin.c stamp-xml
1196 rm -f
$(TUI
)$(EXEEXT
)
1198 # This used to depend on c-exp.c m2-exp.c TAGS
1199 # I believe this is wrong; the makefile standards for distclean just
1200 # describe removing files; the only sort of "re-create a distribution"
1201 # functionality described is if the distributed files are unmodified.
1202 # NB: While GDBSERVER might be configured on native systems, it isn't
1203 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1205 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1206 rm -f gdbserver
/config.status gdbserver
/config.log
1207 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1208 rm -f gdbserver
/Makefile gdbserver
/config.cache
1209 rm -f nm.h config.status config.h stamp-h .gdbinit
1210 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1211 rm -f config.log config.cache
1215 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1216 realclean: maintainer-clean
1218 local-maintainer-clean
:
1219 @echo
"This command is intended for maintainers to use;"
1220 @echo
"it deletes files that may require special tools to rebuild."
1223 ada-lex.c ada-exp.c \
1226 f-exp.c m2-exp.c p-exp.c
1227 rm -f TAGS
$(INFOFILES
)
1229 rm -f nm.h config.status
1231 do-maintainer-clean
:
1232 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1235 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1236 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1239 @for i in
$(DODIRS
); do \
1240 if
[ -f .
/$$i/Makefile
] ; then \
1242 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1243 else exit
1 ; fi
; \
1247 Makefile
: Makefile.in config.status @frags@
1248 # Regenerate the Makefile and the tm.h / nm.h links.
1249 CONFIG_FILES
="Makefile" \
1252 $(SHELL
) config.status
1254 gnulib
/Makefile
: gnulib
/Makefile.in gnulib
/Makefile.in config.status @frags@
1255 CONFIG_FILES
="gnulib/Makefile" \
1256 CONFIG_COMMANDS
="depfiles" \
1259 $(SHELL
) config.status
1261 config.h
: stamp-h
; @true
1262 stamp-h
: $(srcdir)/config.in config.status
1263 CONFIG_HEADERS
=config.h
:config.in \
1264 CONFIG_COMMANDS
="default depdir" \
1267 $(SHELL
) config.status
1269 config.status
: $(srcdir)/configure configure.tgt configure.host
1270 $(SHELL
) config.status
--recheck
1273 ACLOCAL_AMFLAGS
= -I gnulib
/m4
1276 gnulib
/m4
/extensions.m4 \
1277 gnulib
/m4
/gnulib-common.m4 \
1278 gnulib
/m4
/gnulib-comp.m4 \
1279 gnulib
/m4
/include_next.m4 \
1280 gnulib
/m4
/longlong.m4 \
1281 gnulib
/m4
/memchr.m4 \
1282 gnulib
/m4
/memcmp.m4 \
1283 gnulib
/m4
/memmem.m4 \
1284 gnulib
/m4
/onceonly_2_57.m4 \
1285 gnulib
/m4
/stdint.m4 \
1286 gnulib
/m4
/string_h.m4 \
1287 gnulib
/m4
/wchar.m4 \
1288 ..
/config
/extensions.m4 \
1289 ..
/config
/lead-dot.m4 \
1290 ..
/config
/proginstall.m4 \
1292 ..
/config
/acinclude.m4 \
1293 ..
/config
/override.m4 \
1294 ..
/config
/gettext-sister.m4 \
1295 ..
/config
/lib-ld.m4 \
1296 ..
/config
/lib-prefix.m4 \
1297 ..
/config
/lib-link.m4 \
1300 ..
/config
/depstand.m4 \
1301 ..
/config
/lcmessage.m4 \
1302 ..
/config
/codeset.m4
1304 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1305 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1308 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1309 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1310 cd
$(srcdir) && $(AUTOCONF
)
1312 AUTOHEADER
= autoheader
1313 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1314 cd
$(srcdir) && $(AUTOHEADER
)
1318 # automatic rebuilding in automake-generated Makefiles requires
1319 # this rule in the toplevel Makefile, which, with GNU make, causes
1320 # the desired updates through the implicit regeneration of the Makefile
1321 # and all of its prerequisites.
1328 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1330 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1332 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1334 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1336 # GDB MANUAL: TeX dvi file
1338 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1340 # GDB MANUAL: info file
1342 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1344 # Make copying.c from COPYING
1345 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1346 awk
-f
$(srcdir)/copying.awk \
1347 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1348 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1350 version.c
: Makefile version.in
1351 rm -f version.c-tmp version.c
1352 echo
'#include "version.h"' >> version.c-tmp
1353 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1354 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1355 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1356 mv version.c-tmp version.c
1358 observer.h
: observer.sh doc
/observer.texi
1359 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1361 observer.inc
: observer.sh doc
/observer.texi
1362 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1365 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1366 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1368 gdb.cxref
: $(SFILES
)
1369 cxref
-I.
$(SFILES
) >gdb.cxref
1373 # GNU Make has an annoying habit of putting *all* the Makefile variables
1374 # into the environment, unless you include this target as a circumvention.
1375 # Rumor is that this will be fixed (and this target can be removed)
1379 # GNU Make 3.63 has a different problem: it keeps tacking command line
1380 # overrides onto the definition of $(MAKE). This variable setting
1386 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1387 alpha-tdep.c alpha-mdebug-tdep.c \
1388 alpha-linux-tdep.c alpha-osf1-tdep.c \
1389 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1390 amd64-nat.c amd64-tdep.c \
1391 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1392 amd64nbsd-nat.c amd64nbsd-tdep.c \
1393 amd64obsd-nat.c amd64obsd-tdep.c \
1394 amd64-darwin-tdep.c \
1395 amd64-dicos-tdep.c \
1396 amd64-linux-nat.c amd64-linux-tdep.c \
1398 arm-linux-nat.c arm-linux-tdep.c arm-tdep.c \
1399 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1401 bsd-uthread.c bsd-kvm.c \
1402 core-regset.c corelow.c \
1403 dcache.c dicos-tdep.c darwin-nat.c \
1408 go32-nat.c h8300-tdep.c \
1409 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1410 hppa-linux-tdep.c hppa-linux-nat.c \
1411 hppabsd-nat.c hppabsd-tdep.c \
1413 hppanbsd-nat.c hppanbsd-tdep.c \
1414 i386-tdep.c i386-linux-nat.c \
1415 i386v4-nat.c i386-cygwin-tdep.c \
1416 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1417 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1419 i386-darwin-tdep.c i386-darwin-nat.c \
1421 i386-linux-tdep.c i386-nat.c \
1422 i386-sol2-nat.c i386-sol2-tdep.c \
1423 i386gnu-nat.c i386gnu-tdep.c \
1424 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1425 inf-ptrace.c inf-ttrace.c \
1434 m32r-linux-nat.c m32r-linux-tdep.c \
1436 m68kbsd-nat.c m68kbsd-tdep.c \
1437 m68klinux-nat.c m68klinux-tdep.c \
1438 m88k-tdep.c m88kbsd-nat.c \
1439 microblaze-tdep.c microblaze-linux-tdep.c \
1441 mips-linux-nat.c mips-linux-tdep.c \
1444 mipsnbsd-nat.c mipsnbsd-tdep.c \
1445 mips64obsd-nat.c mips64obsd-tdep.c \
1446 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1449 somread.c solib-som.c \
1451 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1452 ppcnbsd-nat.c ppcnbsd-tdep.c \
1453 ppcobsd-nat.c ppcobsd-tdep.c \
1455 remote-m32r-sdi.c remote-mips.c \
1458 rs6000-nat.c rs6000-tdep.c \
1459 s390-tdep.c s390-nat.c \
1461 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1462 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1464 solib-irix.c solib-svr4.c solib-sunos.c \
1465 sparc-linux-nat.c sparc-linux-tdep.c \
1466 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1467 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1468 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1469 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1470 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1471 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1473 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1474 windows-nat.c windows-tdep.c \
1475 xcoffread.c xcoffsolib.c \
1477 xtensa-tdep.c xtensa-config.c \
1478 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1480 # Some files need explicit build rules (due to -Werror problems) or due
1481 # to sub-directory fun 'n' games.
1483 hpux-thread.o
: $(srcdir)/hpux-thread.c
1484 $(COMPILE
) -I
$(srcdir)/osf-share
-I
$(srcdir)/osf-share
/HP800 \
1485 -I
/usr
/include/dce
$(srcdir)/hpux-thread.c
1488 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1489 main.o
: $(srcdir)/main.c
1490 $(COMPILE
) $(TARGET_SYSTEM_ROOT_DEFINE
) -DBINDIR
=\"$(bindir)\" $(srcdir)/main.c
1493 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1494 # errors. It turns out that that is the least of monitor.c's
1495 # problems. The function print_vsprintf appears to be using
1496 # va_arg(long) to extract CORE_ADDR parameters - something that
1497 # definitly will not work. "monitor.c" needs to be rewritten so that
1498 # it doesn't use format strings and instead uses callbacks.
1499 monitor.o
: $(srcdir)/monitor.c
1500 $(COMPILE.pre
) $(INTERNAL_WARN_CFLAGS
) $(COMPILE.post
) $(srcdir)/monitor.c
1503 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1504 # checks format strings.
1505 printcmd.o
: $(srcdir)/printcmd.c
1506 $(COMPILE.pre
) $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1507 $(GDB_WERROR_CFLAGS
) $(COMPILE.post
) $(srcdir)/printcmd.c
1510 # Message files. Based on code in gcc/Makefile.in.
1512 # Rules for generating translated message descriptions. Disabled by
1513 # autoconf if the tools are not available.
1515 .SUFFIXES
: .po .gmo .pox .pot
1516 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1520 # This notation should be acceptable to all Make implementations used
1521 # by people who are interested in updating .po files.
1522 update-po
: $(CATALOGS
:.gmo
=.pox
)
1524 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1527 -test -d po || mkdir po
1528 $(GMSGFMT
) --statistics
-o
$@
$<
1530 # The new .po has to be gone over by hand, so we deposit it into
1531 # build/po with a different extension. If build/po/$(PACKAGE).pot
1532 # exists, use it (it was just created), else use the one in srcdir.
1534 -test -d po || mkdir po
1535 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1536 then echo po/$(PACKAGE).pot; \
1537 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1539 # This rule has to look for .gmo modules in both srcdir and the cwd,
1540 # and has to check that we actually have a catalog for each language,
1541 # in case they weren't built or included with the distribution.
1543 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1544 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1545 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1546 if
[ -f
$$cat ]; then
:; \
1547 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1550 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1551 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1552 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1553 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1554 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1557 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1558 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1559 if
[ -f
$$cat ]; then
:; \
1560 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1563 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1564 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1566 # Delete po/*.gmo only if we are not building in the source directory.
1568 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1570 # Rule for regenerating the message template (gdb.pot). Instead of
1571 # forcing everyone to edit POTFILES.in, which proved impractical, this
1572 # rule has no dependencies and always regenerates gdb.pot. This is
1573 # relatively harmless since the .po files do not directly depend on
1574 # it. The .pot file is left in the build directory. Since GDB's
1575 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1576 # files) force this rule.
1577 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1578 po
/$(PACKAGE
).pot
: force
1579 -test -d po || mkdir po
1580 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1584 # YACC/LEX dependencies
1586 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1587 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1588 # said LANG-exp.c rather than ./c-exp.c some makes would
1589 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1590 # decls for malloc/realloc/free which conflict with everything else.
1591 # Strictly speaking c-exp.c should therefore depend on
1592 # Makefile.in, but that was a pretty big annoyance.
1596 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@.tmp
-- $(YACC
) $(YFLAGS
)
1597 -sed
-e
'/extern.*malloc/d' \
1598 -e
'/extern.*realloc/d' \
1599 -e
'/extern.*free/d' \
1600 -e
'/include.*malloc.h/d' \
1601 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1602 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1603 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1604 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1605 -e
'/^#line.*y.tab.c/d' \
1610 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1611 $(FLEX
) -o
$@
$< && \
1613 sed
-e
'/extern.*malloc/d' \
1614 -e
'/extern.*realloc/d' \
1615 -e
'/extern.*free/d' \
1616 -e
'/include.*malloc.h/d' \
1617 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1618 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1619 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1620 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1621 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1625 elif
[ -f
$@
]; then \
1626 echo
"Warning: $*.c older than $*.l and flex not available."; \
1628 echo
"$@ missing and flex not available."; \
1632 .PRECIOUS
: ada-exp.c ada-lex.c
1637 .PRECIOUS
: objc-exp.c
1642 xml-builtin.c
: stamp-xml
; @true
1643 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1644 rm -f xml-builtin.tmp
1646 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1647 xml-builtin.tmp
$(XMLFILES
)
1648 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1649 echo stamp
> stamp-xml
1651 .PRECIOUS
: xml-builtin.c
1654 # gdb/cli/ dependencies
1656 # Need to explicitly specify the compile rule as make will do nothing
1657 # or try to compile the object file into the sub-directory.
1659 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1660 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1663 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1664 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1667 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1668 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1671 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1672 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1675 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1676 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1679 cli-script.o
: $(srcdir)/cli
/cli-script.c
1680 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1683 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1684 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1689 # GDBTK sub-directory
1691 # Need to explicitly specify the compile rule as make will do nothing
1692 # or try to compile the object file into the mi directory.
1694 all-gdbtk
: insight
$(EXEEXT
)
1697 transformed_name
=`t='$(program_transform_name)'; \
1698 echo insight | sed -e $$t` ; \
1699 if
test "x$$transformed_name" = x
; then \
1700 transformed_name
=insight
; \
1704 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1705 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1706 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1707 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1708 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1709 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1710 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1711 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1712 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1713 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1714 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1715 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1716 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1717 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1718 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1719 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1720 cd
$(srcdir)/gdbtk
/library
; \
1721 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1723 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1727 transformed_name
=`t='$(program_transform_name)'; \
1728 echo insight | sed -e $$t` ; \
1729 if
test "x$$transformed_name" = x
; then \
1730 transformed_name
=insight
; \
1734 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1735 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1738 rm -f insight
$(EXEEXT
)
1740 # Removing the old gdb first works better if it is running, at least on SunOS.
1741 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1742 $(CDEPS
) $(TDEPLIBS
)
1743 rm -f insight
$(EXEEXT
)
1744 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1745 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1746 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1748 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1749 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1751 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1752 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1754 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1755 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1757 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1758 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1761 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1762 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1765 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1766 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1769 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1770 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1773 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1774 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1777 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1778 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1781 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1782 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1785 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1786 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1789 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1790 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1793 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1794 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1799 # gdb/mi/ dependencies
1801 # Need to explicitly specify the compile rule as make will do nothing
1802 # or try to compile the object file into the sub-directory.
1804 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1805 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1808 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1809 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1812 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1813 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1816 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1817 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1820 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1821 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1824 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1825 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1828 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1829 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1832 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1833 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1836 mi-console.o
: $(srcdir)/mi
/mi-console.c
1837 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1840 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1841 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1844 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1845 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1848 mi-main.o
: $(srcdir)/mi
/mi-main.c
1849 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1852 mi-out.o
: $(srcdir)/mi
/mi-out.c
1853 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1856 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1857 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1860 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1861 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1864 mi-common.o
: $(srcdir)/mi
/mi-common.c
1865 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1869 # gdb/common/ dependencies
1871 # Need to explicitly specify the compile rule as make will do nothing
1872 # or try to compile the object file into the sub-directory.
1874 signals.o
: $(srcdir)/common
/signals.c
1875 $(COMPILE
) $(srcdir)/common
/signals.c
1879 # gdb/tui/ dependencies
1881 # Need to explicitly specify the compile rule as make will do nothing
1882 # or try to compile the object file into the sub-directory.
1884 tui.o
: $(srcdir)/tui
/tui.c
1885 $(COMPILE
) $(srcdir)/tui
/tui.c
1888 tui-command.o
: $(srcdir)/tui
/tui-command.c
1889 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1892 tui-data.o
: $(srcdir)/tui
/tui-data.c
1893 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1896 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1897 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1900 tui-file.o
: $(srcdir)/tui
/tui-file.c
1901 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1904 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1905 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1908 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1909 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1912 tui-io.o
: $(srcdir)/tui
/tui-io.c
1913 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1916 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1917 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1920 tui-main.o
: $(srcdir)/tui
/tui-main.c
1921 $(COMPILE
) $(srcdir)/tui
/tui-main.c
1924 tui-out.o
: $(srcdir)/tui
/tui-out.c
1925 $(COMPILE
) $(srcdir)/tui
/tui-out.c
1928 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
1929 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
1932 tui-source.o
: $(srcdir)/tui
/tui-source.c
1933 $(COMPILE
) $(srcdir)/tui
/tui-source.c
1936 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
1937 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
1940 tui-win.o
: $(srcdir)/tui
/tui-win.c
1941 $(COMPILE
) $(srcdir)/tui
/tui-win.c
1944 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
1945 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
1948 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
1949 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
1952 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
1953 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
1957 # gdb/python/ dependencies
1959 # Need to explicitly specify the compile rule as make will do nothing
1960 # or try to compile the object file into the sub-directory.
1962 # Flags needed to compile Python code
1963 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
1965 python.o
: $(srcdir)/python
/python.c
1966 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
1969 py-cmd.o
: $(srcdir)/python
/py-cmd.c
1970 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
1973 py-frame.o
: $(srcdir)/python
/py-frame.c
1974 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
1977 py-function.o
: $(srcdir)/python
/py-function.c
1978 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
1981 py-objfile.o
: $(srcdir)/python
/py-objfile.c
1982 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
1985 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
1986 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
1989 py-type.o
: $(srcdir)/python
/py-type.c
1990 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
1993 py-utils.o
: $(srcdir)/python
/py-utils.c
1994 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
1997 py-value.o
: $(srcdir)/python
/py-value.c
1998 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2002 # Dependency tracking. Most of this is conditional on GNU Make being
2003 # found by configure; if GNU Make is not found, we fall back to a
2007 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2008 # Note that we put the dependencies into a .Tpo file, then move them
2009 # into place if the compile succeeds. We need this because gcc does
2010 # not atomically write the dependency output file.
2011 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2012 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2013 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2014 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2016 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2017 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2018 # depcomp handles atomicity for us, so we don't need a postcompile
2020 @GMAKE_TRUE@
override POSTCOMPILE
=
2023 # A list of all the objects we might care about in this build, for
2024 # dependency tracking.
2025 all_object_files
= gdb.o tui-main.o
$(LIBGDB_OBS
) gdbtk-main.o \
2026 test-cp-name-parser.o
2028 # Ensure that generated files are created early. Use order-only
2029 # dependencies if available. They require GNU make 3.80 or newer,
2030 # and the .VARIABLES variable was introduced at the same time.
2031 @GMAKE_TRUE@
ifdef .VARIABLES
2032 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2034 $(all_object_files
) : $(generated_files
)
2038 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2040 ### end of the gdb Makefile.in.