1 # Copyright (C) 1989-2018 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @
exec_prefix@
40 host_alias
= @host_alias@
41 target_alias
= @target_alias@
42 program_transform_name
= @program_transform_name@
45 tooldir
= $(libdir)/$(target_alias
)
48 localedir
= @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir
= @datarootdir@
64 includedir = @
includedir@
66 install_sh
= @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
80 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA
= @INSTALL_DATA@
101 # If you are compiling with GCC, make sure that either 1) You have the
102 # fixed include files where GCC can reach them, or 2) You use the
103 # -traditional flag. Otherwise the ioctl calls in inflow.c
104 # will be incorrectly compiled. The "fixincludes" script in the gcc
105 # distribution will fix your include files up.
108 CXX_DIALECT
= @CXX_DIALECT@
110 # Dependency tracking information.
111 DEPMODE
= @CCDEPMODE@
113 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
115 # Directory containing source files.
118 top_srcdir
= @top_srcdir@
120 include $(srcdir)/silent-rules.mk
122 # Note that these are overridden by GNU make-specific code below if
123 # GNU make is used. The overrides implement dependency tracking.
124 COMPILE.pre
= $(CXX
) -x c
++ $(CXX_DIALECT
)
125 COMPILE.post
= -c
-o
$@
126 COMPILE
= $(ECHO_CXX
) $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
131 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
132 # not defined, but ada-lex.c is present, compilation will continue,
133 # possibly with a warning.
136 YLWRAP
= $(srcdir)/..
/ylwrap
138 # where to find makeinfo, preferably one designed for texinfo-2
139 MAKEINFO
= @MAKEINFO@
140 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
141 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
142 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
144 MAKEHTML
= $(MAKEINFO_CMD
) --html
147 # Set this up with gcc if you have gnu ld and the loader will print out
148 # line numbers for undefined references.
150 CC_LD
= $(CXX
) $(CXX_DIALECT
)
152 # Where is our "include" directory? Typically $(srcdir)/../include.
153 # This is essentially the header file directory for the library
154 # routines in libiberty.
155 INCLUDE_DIR
= $(srcdir)/..
/include
156 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
158 # Where is the "-liberty" library? Typically in ../libiberty.
159 LIBIBERTY
= ..
/libiberty
/libiberty.a
161 # Where is the BFD library? Typically in ../bfd.
163 BFD
= $(BFD_DIR
)/libbfd.a
164 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
165 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
167 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
168 # -I../zlib, unless we were configured with --with-system-zlib, in which
169 # case both are empty.
173 # Where is the decnumber library? Typically in ../libdecnumber.
174 LIBDECNUMBER_DIR
= ..
/libdecnumber
175 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
176 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
177 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
179 # Where is the READLINE library? Typically in ../readline.
180 READLINE_DIR
= ..
/readline
181 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
182 READLINE
= @READLINE@
183 READLINE_DEPS
= @READLINE_DEPS@
184 READLINE_CFLAGS
= @READLINE_CFLAGS@
186 # Where is expat? This will be empty if expat was not available.
187 LIBEXPAT
= @LIBEXPAT@
189 # Where is lzma? This will be empty if lzma was not available.
192 # Where is libbabeltrace? This will be empty if lbabeltrace was not
194 LIBBABELTRACE
= @LIBBABELTRACE@
196 # Where is libipt? This will be empty if libipt was not available.
199 # Where is libmpfr? This will be empty if libmpfr was not available.
202 WARN_CFLAGS
= @WARN_CFLAGS@
203 WERROR_CFLAGS
= @WERROR_CFLAGS@
204 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
205 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
207 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
208 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
209 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
210 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
212 RDYNAMIC
= @RDYNAMIC@
214 # Where is the INTL library? Typically in ../intl.
216 INTL_DEPS
= @LIBINTL_DEP@
217 INTL_CFLAGS
= @INCINTL@
219 # Where is the ICONV library? This will be empty if in libc or not available.
220 LIBICONV
= @LIBICONV@
222 # Did the user give us a --with-gdb-datadir option?
223 GDB_DATADIR
= @GDB_DATADIR@
227 CODESIGN_CERT
= @CODESIGN_CERT@
229 # Flags to pass to gdb when invoked with "make run".
232 # Helper code from gnulib.
233 GNULIB_BUILDDIR
= build-gnulib
234 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
235 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
237 # Generated headers in the gnulib directory. These must be listed
238 # so that they are generated before other files are compiled.
239 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
242 # CLI sub directory definitons
254 SUBDIR_CLI_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_CLI_SRCS
))
257 # MI sub directory definitons
278 SUBDIR_MI_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_MI_SRCS
))
285 # TUI sub directory definitions
303 tui
/tui-wingeneral.c \
306 SUBDIR_TUI_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_TUI_SRCS
))
310 SUBDIR_TUI_CFLAGS
= -DTUI
=1
313 # GCC Compile support sub-directory definitions
315 SUBDIR_GCC_COMPILE_SRCS
= \
317 compile
/compile-c-support.c \
318 compile
/compile-c-symbols.c \
319 compile
/compile-c-types.c \
320 compile
/compile-loc2c.c \
321 compile
/compile-object-load.c \
322 compile
/compile-object-run.c
324 SUBDIR_GCC_COMPILE_OBS
= $(patsubst %.c
,%.o
,$(filter %.c
,$(SUBDIR_GCC_COMPILE_SRCS
)))
327 # Guile sub directory definitons for guile support.
329 SUBDIR_GUILE_SRCS
= \
332 guile
/scm-auto-load.c \
334 guile
/scm-breakpoint.c \
337 guile
/scm-exception.c \
340 guile
/scm-iterator.c \
341 guile
/scm-lazy-string.c \
343 guile
/scm-objfile.c \
346 guile
/scm-pretty-print.c \
347 guile
/scm-progspace.c \
348 guile
/scm-safe-call.c \
356 SUBDIR_GUILE_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_GUILE_SRCS
))
359 SUBDIR_GUILE_LDFLAGS
=
360 SUBDIR_GUILE_CFLAGS
=
363 # python sub directory definitons
365 SUBDIR_PYTHON_SRCS
= \
367 python
/py-auto-load.c \
369 python
/py-bpevent.c \
370 python
/py-breakpoint.c \
372 python
/py-continueevent.c \
374 python
/py-evtregistry.c \
376 python
/py-exitedevent.c \
377 python
/py-finishbreakpoint.c \
379 python
/py-framefilter.c \
380 python
/py-function.c \
381 python
/py-gdb-readline.c \
382 python
/py-inferior.c \
383 python
/py-infevents.c \
384 python
/py-infthread.c \
385 python
/py-instruction.c \
386 python
/py-lazy-string.c \
387 python
/py-linetable.c \
388 python
/py-newobjfileevent.c \
389 python
/py-objfile.c \
391 python
/py-prettyprint.c \
392 python
/py-progspace.c \
394 python
/py-record-btrace.c \
395 python
/py-record-full.c \
396 python
/py-signalevent.c \
397 python
/py-stopevent.c \
400 python
/py-threadevent.c \
406 python
/py-xmethods.c \
409 SUBDIR_PYTHON_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_PYTHON_SRCS
))
412 SUBDIR_PYTHON_LDFLAGS
=
413 SUBDIR_PYTHON_CFLAGS
=
415 SUBDIR_UNITTESTS_SRCS
= \
416 unittests
/array-view-selftests.c \
417 unittests
/cli-utils-selftests.c \
418 unittests
/common-utils-selftests.c \
419 unittests
/environ-selftests.c \
420 unittests
/format_pieces-selftests.c \
421 unittests
/function-view-selftests.c \
422 unittests
/lookup_name_info-selftests.c \
423 unittests
/memory-map-selftests.c \
424 unittests
/memrange-selftests.c \
425 unittests
/offset-type-selftests.c \
426 unittests
/observable-selftests.c \
427 unittests
/optional-selftests.c \
428 unittests
/parse-connection-spec-selftests.c \
429 unittests
/ptid-selftests.c \
430 unittests
/rsp-low-selftests.c \
431 unittests
/scoped_fd-selftests.c \
432 unittests
/scoped_mmap-selftests.c \
433 unittests
/scoped_restore-selftests.c \
434 unittests
/string_view-selftests.c \
435 unittests
/tracepoint-selftests.c \
436 unittests
/unpack-selftests.c \
437 unittests
/utils-selftests.c \
438 unittests
/xml-utils-selftests.c
440 SUBDIR_UNITTESTS_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_UNITTESTS_SRCS
))
442 SUBDIR_TARGET_SRCS
= target
/waitstatus.c
443 SUBDIR_TARGET_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_TARGET_SRCS
))
446 # Opcodes currently live in one of two places. Either they are in the
447 # opcode library, typically ../opcodes, or they are in a header file
449 # Where is the "-lopcodes" library, with (some of) the opcode tables and
451 OPCODES_DIR
= ..
/opcodes
452 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
453 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
454 # Where are the other opcode tables which only have header file
456 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
457 # Some source files like to use #include "opcodes/file.h"
458 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
460 # The simulator is usually nonexistent; targets that include one
461 # should set this to list all the .o or .a files to be linked in.
464 WIN32LIBS
= @WIN32LIBS@
466 # Tcl et al cflags and libraries
468 TCL_CFLAGS
= @TCL_INCLUDE@
469 GDBTKLIBS
= @GDBTKLIBS@
470 # Extra flags that the GDBTK files need:
471 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
474 TK_CFLAGS
= @TK_INCLUDE@
476 X11_CFLAGS
= @TK_XINCLUDES@
480 WIN32LDAPP
= @WIN32LDAPP@
483 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
484 IDE_CFLAGS
= $(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
486 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
488 # The version of gdbtk we're building. This should be kept
489 # in sync with GDBTK_VERSION and friends in gdbtk.h.
491 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
493 # Gdbtk requires an absolute path to the source directory or
494 # the testsuite won't run properly.
495 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
508 SUBDIR_GDBTK_SRCS
= \
509 gdbtk
/generic
/gdbtk.c \
510 gdbtk
/generic
/gdbtk-bp.c \
511 gdbtk
/generic
/gdbtk-cmds.c \
512 gdbtk
/generic
/gdbtk-hooks.c \
513 gdbtk
/generic
/gdbtk-interp.c \
514 gdbtk
/generic
/gdbtk-main.c \
515 gdbtk
/generic
/gdbtk-register.c \
516 gdbtk
/generic
/gdbtk-stack.c \
517 gdbtk
/generic
/gdbtk-varobj.c \
518 gdbtk
/generic
/gdbtk-wrapper.c
520 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
521 SUBDIR_GDBTK_LDFLAGS
=
522 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
524 CONFIG_OBS
= @CONFIG_OBS@
525 CONFIG_SRCS
= @CONFIG_SRCS@
526 CONFIG_DEPS
= @CONFIG_DEPS@
527 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
528 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
529 CONFIG_ALL
= @CONFIG_ALL@
530 CONFIG_CLEAN
= @CONFIG_CLEAN@
531 CONFIG_INSTALL
= @CONFIG_INSTALL@
532 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
533 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
535 CONFIG_SRC_SUBDIR
= arch cli mi common compile tui unittests guile python target
536 CONFIG_DEP_SUBDIR
= $(addsuffix /$(DEPDIR
),$(CONFIG_SRC_SUBDIR
))
538 # -I. for config files.
539 # -I$(srcdir) for gdb internal headers.
540 # -I$(srcdir)/config for more generic config files.
542 # It is also possible that you will need to add -I/usr/include/sys if
543 # your system doesn't have fcntl.h in /usr/include (which is where it
544 # should be according to Posix).
546 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
547 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
549 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
550 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
552 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
554 # These are specifically reserved for setting from the command line
555 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
557 CXXFLAGS
= @CXXFLAGS@
558 CPPFLAGS
= @CPPFLAGS@
560 # Set by configure, for e.g. expat. Python installations are such that
561 # C headers are included using their basename (for example, we #include
562 # <Python.h> rather than, say, <python/Python.h>). Since the file names
563 # are sometimes a little generic, we think that the risk of collision
564 # with other header files is high. If that happens, we try to mitigate
565 # a bit the consequences by putting the Python includes last in the list.
566 INTERNAL_CPPFLAGS
= $(CPPFLAGS
) @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
568 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
569 INTERNAL_CFLAGS_BASE
= \
570 $(CXXFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
571 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) $(ZLIBINC
) \
572 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
573 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
574 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
575 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
577 # LDFLAGS is specifically reserved for setting from the command line
581 # Profiling options need to go here to work.
582 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
583 # and have it work; that's why CFLAGS is here.
584 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
586 $(CXXFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) \
587 $(LDFLAGS
) $(CONFIG_LDFLAGS
)
589 # If your system is missing alloca(), or, more likely, it's there but
590 # it doesn't work, then refer to libiberty.
592 # Libraries and corresponding dependencies for compiling gdb.
593 # XM_CLIBS, defined in *config files, have host-dependent libs.
594 # LIBIBERTY appears twice on purpose.
595 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(ZLIB
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
596 $(XM_CLIBS
) $(GDBTKLIBS
) \
597 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
598 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) $(LIBIPT
) \
599 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
) $(LIBICONV
) $(LIBMPFR
)
600 CDEPS
= $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
601 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
608 # XML files to build in to GDB.
610 $(srcdir)/features
/btrace.dtd \
611 $(srcdir)/features
/btrace-conf.dtd \
612 $(srcdir)/features
/gdb-target.dtd \
613 $(srcdir)/features
/library-list.dtd \
614 $(srcdir)/features
/library-list-aix.dtd \
615 $(srcdir)/features
/library-list-svr4.dtd \
616 $(srcdir)/features
/osdata.dtd \
617 $(srcdir)/features
/threads.dtd \
618 $(srcdir)/features
/traceframe-info.dtd \
619 $(srcdir)/features
/xinclude.dtd
621 # Build the ser-*.o files the host supports. This includes ser-unix.o
622 # for any system that supports a POSIX interface to the serial port.
624 SER_HARDWIRE
= @SER_HARDWIRE@
626 # This is remote-sim.o if a simulator is to be linked in.
629 # Target-dependent object files.
630 TARGET_OBS
= @TARGET_OBS@
632 # All target-dependent objects files that require 64-bit CORE_ADDR
633 # (used with --enable-targets=all --enable-64-bit-bfd).
634 ALL_64_TARGET_OBS
= \
635 aarch64-fbsd-tdep.o \
636 aarch64-linux-tdep.o \
637 aarch64-newlib-tdep.o \
641 alpha-mdebug-tdep.o \
645 amd64-darwin-tdep.o \
653 amd64-windows-tdep.o \
655 arch
/aarch64-insn.o \
661 sparc64-fbsd-tdep.o \
662 sparc64-linux-tdep.o \
663 sparc64-nbsd-tdep.o \
664 sparc64-obsd-tdep.o \
665 sparc64-sol2-tdep.o \
668 # All other target-dependent objects files (used with --enable-targets=all).
672 arch
/arm-get-next-pcs.o \
675 arch
/ppc-linux-common.o \
728 microblaze-linux-tdep.o \
735 mn10300-linux-tdep.o \
750 ppc-ravenscar-thread.o \
758 rs6000-lynx178-tdep.o \
777 sparc-ravenscar-thread.o \
785 tilegx-linux-tdep.o \
795 xtensa-linux-tdep.o \
798 # The following native-target dependent variables are defined on
800 NAT_FILE
= @NAT_FILE@
801 NATDEPFILES
= @NATDEPFILES@
802 NAT_CDEPS
= @NAT_CDEPS@
803 LOADLIBES
= @LOADLIBES@
804 MH_CFLAGS
= @MH_CFLAGS@
805 XM_CLIBS
= @XM_CLIBS@
806 NAT_GENERATED_FILES
= @NAT_GENERATED_FILES@
807 HAVE_NATIVE_GCORE_HOST
= @HAVE_NATIVE_GCORE_HOST@
809 # Native-target dependent makefile fragment comes in here.
812 # End of native-target dependent variables.
816 "exec_prefix=$(exec_prefix)" \
817 "infodir=$(infodir)" \
818 "datarootdir=$(datarootdir)" \
820 "htmldir=$(htmldir)" \
824 "datadir=$(datadir)" \
825 "includedir=$(includedir)" \
826 "against=$(against)" \
827 "DESTDIR=$(DESTDIR)" \
829 "AR_FLAGS=$(AR_FLAGS)" \
833 "CXX_DIALECT=$(CXX_DIALECT)" \
834 "CXXFLAGS=$(CXXFLAGS)" \
835 "DLLTOOL=$(DLLTOOL)" \
836 "LDFLAGS=$(LDFLAGS)" \
838 "MAKEINFO=$(MAKEINFO)" \
839 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
840 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
841 "MAKEHTML=$(MAKEHTML)" \
842 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
843 "INSTALL=$(INSTALL)" \
844 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
845 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
846 "INSTALL_DATA=$(INSTALL_DATA)" \
847 "RUNTEST=$(RUNTEST)" \
848 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
850 # Flags that we pass when building the testsuite.
852 # empty for native, $(target_alias)/ for cross
853 target_subdir
= @target_subdir@
856 if [ -f $${rootme}/../gcc/xgcc ] ; then \
857 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
858 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
860 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
863 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
866 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
871 if [ -f $${rootme}/../gcc/xg++ ] ; then \
872 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
873 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
875 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
878 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
881 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
885 # The use of $$(x_FOR_TARGET) reduces the command line length by not
886 # duplicating the lengthy definition.
887 TARGET_FLAGS_TO_PASS
= \
889 "exec_prefix=$(exec_prefix)" \
890 "against=$(against)" \
891 'CC=$$(CC_FOR_TARGET)' \
892 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
894 'CXX=$$(CXX_FOR_TARGET)' \
895 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
896 "CXXFLAGS=$(CXXFLAGS)" \
897 "INSTALL=$(INSTALL)" \
898 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
899 "INSTALL_DATA=$(INSTALL_DATA)" \
900 "MAKEINFO=$(MAKEINFO)" \
901 "MAKEHTML=$(MAKEHTML)" \
902 "RUNTEST=$(RUNTEST)" \
903 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
904 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
907 # All source files that go into linking GDB.
909 # Files that should wind up in SFILES and whose corresponding .o
910 # should be in COMMON_OBS.
930 break-catch-syscall.c \
931 break-catch-throw.c \
946 common
/btrace-common.c \
949 common
/common-debug.c \
950 common
/common-exceptions.c \
951 common
/common-regcache.c \
952 common
/common-utils.c \
958 common
/job-control.c \
959 common
/gdb_tilde_expand.c \
964 common
/print-utils.c \
967 common
/run-time-clock.c \
968 common
/scoped_mmap.c \
970 common
/signals-state-save-restore.c \
996 dwarf-index-cache.c \
997 dwarf-index-common.c \
998 dwarf-index-write.c \
1000 dwarf2-frame-tailcall.c \
1014 filename-seen-cache.c \
1028 gdbarch-selftests.c \
1080 progspace-and-thread.c \
1111 target-descriptions.c \
1137 # Links made at configuration time should not be specified here, since
1138 # SFILES is used in building the distribution archive.
1162 $(SUBDIR_CLI_SRCS
) \
1163 $(SUBDIR_TARGET_SRCS
) \
1165 $(SUBDIR_GCC_COMPILE_SRCS
)
1167 # Header files that need to have srcdir added. Note that in the cases
1168 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1169 # so that each .h file is listed exactly once (M-x tags-search works
1170 # wrong if TAGS has files twice). Because this is tricky to get
1171 # right, it is probably easiest just to list .h files here directly.
1173 HFILES_NO_SRCDIR
= \
1179 amd64-darwin-tdep.h \
1180 amd64-linux-tdep.h \
1221 dwarf-index-cache.h \
1222 dwarf-index-common.h \
1224 dwarf2-frame-tailcall.h \
1250 gdb_proc_service.h \
1267 hppa-linux-offsets.h \
1270 i386-darwin-tdep.h \
1275 ia64-libunwind-tdep.h \
1327 ppc-ravenscar-thread.h \
1334 progspace-and-thread.h \
1338 ravenscar-thread.h \
1373 sparc-ravenscar-thread.h \
1384 target-descriptions.h \
1414 arch
/aarch64-insn.h \
1417 arch
/ppc-linux-common.h \
1418 arch
/ppc-linux-tdesc.h \
1426 common
/common-debug.h \
1427 common
/common-defs.h \
1428 common
/common-exceptions.h \
1429 common
/common-gdbthread.h \
1430 common
/common-regcache.h \
1431 common
/common-types.h \
1432 common
/common-utils.h \
1433 common
/job-control.h \
1438 common
/gdb_assert.h \
1439 common
/gdb_tilde_expand.h \
1440 common
/gdb_locale.h \
1441 common
/gdb_setjmp.h \
1442 common
/gdb_signals.h \
1443 common
/gdb_sys_time.h \
1446 common
/common-inferior.h \
1448 common
/host-defs.h \
1449 common
/pathstuff.h \
1450 common
/print-utils.h \
1454 common
/run-time-clock.h \
1455 common
/signals-state-save-restore.h \
1460 common
/x86-xstate.h \
1461 common
/xml-utils.h \
1463 compile
/compile-c.h \
1464 compile
/compile-internal.h \
1465 compile
/compile-object-load.h \
1466 compile
/compile-object-run.h \
1467 compile
/gcc-c-plugin.h \
1470 config
/djgpp
/langinfo.h \
1471 config
/djgpp
/nl_types.h \
1472 config
/i386
/nm-fbsd.h \
1473 config
/i386
/nm-i386gnu.h \
1474 config
/sparc
/nm-sol2.h \
1475 gnulib
/import
/inttypes.in.h \
1476 gnulib
/import
/stddef.in.h \
1477 gnulib
/import
/stdint.in.h \
1478 gnulib
/import
/str-two-way.h \
1479 gnulib
/import
/string.in.h \
1480 gnulib
/import
/extra
/snippet
/arg-nonnull.h \
1481 gnulib
/import
/extra
/snippet
/c
++defs.h \
1482 gnulib
/import
/extra
/snippet
/warn-on-use.h \
1490 nat
/aarch64-linux.h \
1491 nat
/aarch64-linux-hw-point.h \
1492 nat
/aarch64-sve-linux-ptrace.h \
1493 nat
/amd64-linux-siginfo.h \
1495 nat
/gdb_thread_db.h \
1496 nat
/fork-inferior.h \
1497 nat
/linux-btrace.h \
1498 nat
/linux-namespaces.h \
1500 nat
/linux-osdata.h \
1501 nat
/linux-personality.h \
1502 nat
/linux-ptrace.h \
1503 nat
/linux-waitpid.h \
1504 nat
/mips-linux-watch.h \
1508 nat
/x86-gcc-cpuid.h \
1510 nat
/x86-linux-dregs.h \
1512 python
/py-events.h \
1513 python
/py-stopevent.h \
1515 python
/python-internal.h \
1516 regformats
/regdef.h \
1520 target
/waitstatus.h \
1534 tui
/tui-wingeneral.h \
1535 tui
/tui-winsource.h \
1538 # Header files that already have srcdir in them, or which are in objdir.
1540 HFILES_WITH_SRCDIR
= \
1544 # GDB "info" files, which should be included in their entirety
1545 INFOFILES
= gdb.
info*
1547 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1548 # default their values the way we do for SER_HARDWIRE; in the future
1549 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1550 # variables analogous to SER_HARDWIRE which get defaulted in this
1553 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) $(SIM_OBS
)
1555 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
1556 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1557 # and it's more useful to see it in the .y file.
1558 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
1560 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
1562 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
1566 $(patsubst %.c
,%.o
,$(COMMON_SFILES
)) \
1568 $(SUBDIR_TARGET_OBS
) \
1569 $(SUBDIR_GCC_COMPILE_OBS
)
1571 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1572 CLEANDIRS
= $(SUBDIRS
)
1574 # List of subdirectories in the build tree that must exist.
1575 # This is used to force build failures in existing trees when
1576 # a new directory is added.
1577 # The format here is for the `case' shell command.
1578 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1580 # Parser intermediate files.
1593 # ada-lex.c is included by another file, so it shouldn't wind up as a
1595 YYOBJ
= $(filter-out ada-lex.o
,$(patsubst %.c
,%.o
,$(YYFILES
)))
1597 # Things which need to be built when making a distribution.
1599 DISTSTUFF
= $(YYFILES
)
1602 # All generated files which can be included by another file.
1609 $(NAT_GENERATED_FILES
)
1611 # Flags needed to compile Python code
1612 PYTHON_CFLAGS
= @PYTHON_CFLAGS@
1614 all: gdb
$(EXEEXT
) $(CONFIG_ALL
) gdb-gdb.py gdb-gdb.gdb
1615 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1617 # Rule for compiling .c files in the top-level gdb directory.
1618 # The order-only dependencies ensure that we create the build subdirectories.
1619 %.o
: %.c |
$(CONFIG_DEP_SUBDIR
)
1623 $(CONFIG_DEP_SUBDIR
):
1624 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$@
1626 # Python files need special flags.
1627 python
/%.o
: INTERNAL_CFLAGS
+= $(PYTHON_CFLAGS
)
1629 # Rules for compiling .c files in the various source subdirectories.
1630 %.o
: $(srcdir)/gdbtk
/generic
/%.c
1631 $(COMPILE
) $(all_gdbtk_cflags
) $<
1634 %.o
: ${srcdir}/nat
/%.c
1640 # The check target can not use subdir_do, because subdir_do does not
1641 # use TARGET_FLAGS_TO_PASS.
1643 @if
[ -f testsuite
/Makefile
]; then \
1644 rootme
=`pwd`; export rootme
; \
1645 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1647 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1651 @if
[ -f testsuite
/Makefile
]; then \
1652 rootme
=`pwd`; export rootme
; \
1653 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1655 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1659 @if
[ -f testsuite
/Makefile
]; then \
1660 rootme
=`pwd`; export rootme
; \
1661 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1663 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-read1
; \
1666 check-parallel
: force
1667 @if
[ -f testsuite
/Makefile
]; then \
1668 rootme
=`pwd`; export rootme
; \
1669 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1671 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-parallel
; \
1674 # The idea is to parallelize testing of multilibs, for example:
1675 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1676 # will run 3 concurrent sessions of check, eventually testing all 10
1677 # combinations. GNU make is required for the % pattern to work, as is
1678 # a shell that expands alternations within braces. If GNU make is not
1679 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1680 # prevent serialized checking due to the passed RUNTESTFLAGS.
1681 # FIXME: use config.status --config not --version, when available.
1683 @if
[ -f testsuite
/config.status
]; then \
1684 rootme
=`pwd`; export rootme
; \
1685 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1686 target
=`echo "$@" | sed 's,//.*,,'`; \
1687 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1688 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1689 testdir
=testsuite.
$$vardots; \
1690 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1691 configargs
=`cd testsuite && ./config.status --version | \
1692 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1693 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1695 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1696 "\"--srcdir=\$$rootsrc/testsuite\"" \
1698 else :; fi
&& cd
$$testdir && \
1699 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1700 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1701 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1705 # The set of headers checked by 'check-headers' by default.
1706 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1708 # Try to compile each header in isolation, thus ensuring headers are
1711 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1715 # make check-headers CHECK_HEADERS="header.h list.h"
1717 # to check specific headers.
1720 @echo Checking headers.
1721 for i in
$(CHECK_HEADERS
) ; do \
1722 $(CXX
) $(CXX_DIALECT
) -x c
++-header
-c
-fsyntax-only \
1723 $(INTERNAL_CFLAGS
) -include defs.h
$(srcdir)/$$i ; \
1725 .PHONY
: check-headers
1727 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1728 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1730 # Traditionally "install" depends on "all". But it may be useful
1731 # not to; for example, if the user has made some trivial change to a
1732 # source file and doesn't care about rebuilding or just wants to save the
1733 # time it takes for make to check that all is up to date.
1734 # install-only is intended to address that need.
1736 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1738 install-only
: $(CONFIG_INSTALL
)
1739 transformed_name
=`t='$(program_transform_name)'; \
1740 echo gdb | sed -e "$$t"` ; \
1741 if
test "x$$transformed_name" = x
; then \
1742 transformed_name
=gdb
; \
1746 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1747 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1748 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1749 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1750 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1751 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1753 transformed_name
=`t='$(program_transform_name)'; \
1754 echo gcore | sed -e "$$t"` ; \
1755 if
test "x$$transformed_name" = x
; then \
1756 transformed_name
=gcore
; \
1760 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1761 $(INSTALL_SCRIPT
) gcore \
1762 $(DESTDIR
)$(bindir)/$$transformed_name; \
1764 transformed_name
=`t='$(program_transform_name)'; \
1765 echo gdb-add-index | sed -e "$$t"` ; \
1766 if
test "x$$transformed_name" = x
; then \
1767 transformed_name
=gdb-add-index
; \
1771 $(INSTALL_PROGRAM
) $(srcdir)/contrib
/gdb-add-index.sh \
1772 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
)
1773 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1776 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1777 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1778 `test -z '$(STRIP)' || \
1779 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1782 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1785 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1787 uninstall: force $(CONFIG_UNINSTALL
)
1788 transformed_name
=`t='$(program_transform_name)'; \
1789 echo gdb | sed -e $$t` ; \
1790 if
test "x$$transformed_name" = x
; then \
1791 transformed_name
=gdb
; \
1795 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1796 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1797 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1799 transformed_name
=`t='$(program_transform_name)'; \
1800 echo gcore | sed -e "$$t"` ; \
1801 if
test "x$$transformed_name" = x
; then \
1802 transformed_name
=gcore
; \
1806 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1808 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1810 # The C++ name parser can be built standalone for testing.
1811 test-cp-name-parser.o
: cp-name-parser.c
1812 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1815 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1816 $(ECHO_CXXLD
) $(CC_LD
) $(INTERNAL_LDFLAGS
) \
1817 -o test-cp-name-parser
$(EXEEXT
) test-cp-name-parser.o \
1820 # We do this by grepping through sources. If that turns out to be too slow,
1821 # maybe we could just require every .o file to have an initialization routine
1822 # of a given name (top.o -> _initialize_top, etc.).
1824 # Formatting conventions: The name of the _initialize_* routines must start
1825 # in column zero, and must not be inside #if.
1827 # Note that the set of files with init functions might change, or the names
1828 # of the functions might change, so this files needs to depend on all the
1829 # object files that will be linked into gdb.
1831 # FIXME: There is a problem with this approach - init.c may force
1832 # unnecessary files to be linked in.
1834 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1835 # the first call is to _initialize_gdbtypes (implemented by explicitly
1836 # putting that function's name first in the init.l-tmp file). This is
1837 # a hack to ensure that all the architecture dependant global
1838 # builtin_type_* variables are initialized before anything else
1839 # (per-architecture code is called in the same order that it is
1840 # registered). The ``correct fix'' is to have all the builtin types
1841 # made part of the architecture and initialize them on-demand (using
1842 # gdbarch_data) just like everything else. The catch is that other
1843 # modules still take the address of these builtin types forcing them
1844 # to be variables, sigh!
1846 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1847 # anchored on the first column and excludes the ``/'' character so
1848 # that it doesn't add the $(srcdir) prefix to any file that already
1849 # has an absolute path. It turns out that $(DEC)'s True64 make
1850 # automatically adds the $(srcdir) prefixes when it encounters files
1851 # in sub-directories such as cli/ and mi/.
1853 INIT_FILES
= $(COMMON_OBS
)
1854 init.c
: stamp-init
; @true
1855 stamp-init
: $(INIT_FILES
)
1856 @
$(ECHO_INIT_C
) echo
"Making init.c"
1857 @
rm -f init.c-tmp init.l-tmp
1859 @echo gdbtypes
> init.l-tmp
1860 @
-LANG
=C
; export LANG
; \
1861 LC_ALL
=C
; export LC_ALL
; \
1862 echo
$(INIT_FILES
) | \
1865 -e
'/^gdbtypes.[co]$$/d' \
1866 -e
'/^init.[co]$$/d' \
1867 -e
'/version.[co]$$/d' \
1868 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1869 -e
's/-exp\.o$$/-exp.y/' \
1871 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1873 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1875 @echo
'/* Do not modify this file. */' >>init.c-tmp
1876 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1877 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1878 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1879 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1880 @echo
'void' >>init.c-tmp
1881 @echo
'initialize_all_files (void)' >>init.c-tmp
1882 @echo
'{' >>init.c-tmp
1883 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1884 @echo
'}' >>init.c-tmp
1885 @
$(SHELL
) $(srcdir)/..
/move-if-change init.c-tmp init.c
1886 @echo stamp
> stamp-init
1890 # Create a library of the gdb object files and build GDB by linking
1893 # init.o is very important. It pulls in the rest of GDB.
1894 LIBGDB_OBS
= $(COMMON_OBS
) init.o
1895 libgdb.a
: $(LIBGDB_OBS
)
1897 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1900 # Removing the old gdb first works better if it is running, at least on SunOS.
1901 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(CDEPS
) $(TDEPLIBS
)
1902 $(SILENCE
) rm -f gdb
$(EXEEXT
)
1903 $(ECHO_CXXLD
) $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1904 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1905 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1906 ifneq ($(CODESIGN_CERT
),)
1907 $(ECHO_SIGN
) $(CODESIGN
) -s
$(CODESIGN_CERT
) gdb
$(EXEEXT
)
1910 # Convenience rule to handle recursion.
1911 $(LIBGNU
) $(GNULIB_H
): all-lib
1912 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1913 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1916 # Convenience rule to handle recursion.
1917 .PHONY
: all-data-directory
1918 all-data-directory
: data-directory
/Makefile
1919 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1921 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1922 # on itself without copying the executable. So "make gdb1" will make
1923 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1924 # Removing gdb1 before the copy is the right thing if gdb1 is open
1925 # in another process.
1926 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1928 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1930 # Put the proper machine-specific files first, so M-. on a machine
1931 # specific routine gets the one for the correct machine. (FIXME: those
1932 # files go in twice; we should be removing them from the main list).
1934 # TAGS depends on all the files that go into it so you can rebuild TAGS
1935 # with `make TAGS' and not have to say `rm TAGS' first.
1937 GDB_NM_FILE
= @GDB_NM_FILE@
1938 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1940 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1941 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1942 echo $(srcdir)/$$i ; \
1943 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1945 done) | sed -e 's/\.o$$/\.c/'` \
1946 `find $(srcdir)/config -name '*.h' -print`
1950 clean mostlyclean: $(CONFIG_CLEAN
)
1951 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1952 rm -f
*.o
*.a
*~ init.c-tmp init.l-tmp version.c-tmp
1953 rm -f init.c stamp-init version.c stamp-version
1954 rm -f gdb
$(EXEEXT
) core make.log
1955 rm -f gdb
[0-9]$(EXEEXT
)
1956 rm -f test-cp-name-parser
$(EXEEXT
)
1957 rm -f xml-builtin.c stamp-xml
1959 for i in
$(CONFIG_SRC_SUBDIR
); do \
1961 rm -f
$$i/$(DEPDIR
)/*; \
1964 # This used to depend on c-exp.c m2-exp.c TAGS
1965 # I believe this is wrong; the makefile standards for distclean just
1966 # describe removing files; the only sort of "re-create a distribution"
1967 # functionality described is if the distributed files are unmodified.
1968 # NB: While GDBSERVER might be configured on native systems, it isn't
1969 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1971 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1972 rm -rf
$(GNULIB_BUILDDIR
)
1973 rm -f gdbserver
/config.status gdbserver
/config.log
1974 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1975 rm -f gdbserver
/Makefile gdbserver
/config.cache
1976 rm -f nm.h config.status config.h stamp-h b jit-reader.h
1977 rm -f gdb-gdb.py gdb-gdb.gdb
1978 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1979 rm -f config.log config.cache
1982 for i in
$(CONFIG_SRC_SUBDIR
); do \
1983 if
test -d
$$i/$(DEPDIR
); then rmdir
$$i/$(DEPDIR
); fi \
1986 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1987 realclean: maintainer-clean
1989 local-maintainer-clean
:
1990 @echo
"This command is intended for maintainers to use;"
1991 @echo
"it deletes files that may require special tools to rebuild."
1994 ada-lex.c ada-exp.c \
1995 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
1996 rm -f TAGS
$(INFOFILES
)
1998 rm -f nm.h config.status
2000 do-maintainer-clean
:
2001 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
2004 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
2005 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
2008 @for i in
$(DODIRS
); do \
2010 $(REQUIRED_SUBDIRS
)) \
2011 if
[ ! -f .
/$$i/Makefile
] ; then \
2012 echo
"Missing $$i/Makefile" >&2 ; \
2016 if
[ -f .
/$$i/Makefile
] ; then \
2018 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
2019 else exit
1 ; fi
; \
2023 Makefile
: Makefile.in config.status
2024 # Regenerate the Makefile and the tm.h / nm.h links.
2025 CONFIG_FILES
="Makefile" \
2028 $(SHELL
) config.status
2030 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status
2031 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
2032 CONFIG_COMMANDS
="depfiles" \
2035 $(SHELL
) config.status
2037 data-directory
/Makefile
: data-directory
/Makefile.in config.status
2038 CONFIG_FILES
="data-directory/Makefile" \
2039 CONFIG_COMMANDS
="depfiles" \
2042 $(SHELL
) config.status
2046 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
2048 jit-reader.h
: $(srcdir)/jit-reader.in
2049 $(SHELL
) config.status
$@
2051 gcore
: $(srcdir)/gcore.in
2052 $(SHELL
) config.status
$@
2054 gdb-gdb.py
: $(srcdir)/gdb-gdb.py.in
2055 $(SHELL
) config.status
$@
2057 gdb-gdb.gdb
: $(srcdir)/gdb-gdb.gdb.in
2058 $(SHELL
) config.status
$@
2060 config.h
: stamp-h
; @true
2061 stamp-h
: $(srcdir)/config.in config.status
2062 CONFIG_HEADERS
=config.h
:config.in \
2063 CONFIG_COMMANDS
="default depdir" \
2066 $(SHELL
) config.status
2068 config.status
: $(srcdir)/configure configure.nat configure.tgt configure.host ..
/bfd
/development.sh
2069 $(SHELL
) config.status
--recheck
2072 ACLOCAL_AMFLAGS
= -I ..
/config
2074 # Keep these in sync with the includes in acinclude.m4.
2077 acx_configure_dir.m4 \
2081 ..
/config
/acinclude.m4 \
2082 ..
/config
/plugins.m4 \
2083 ..
/config
/lead-dot.m4 \
2084 ..
/config
/override.m4 \
2085 ..
/config
/largefile.m4 \
2086 ..
/config
/gettext-sister.m4 \
2087 ..
/config
/lib-ld.m4 \
2088 ..
/config
/lib-prefix.m4 \
2089 ..
/config
/lib-link.m4 \
2092 ..
/config
/depstand.m4 \
2093 ..
/config
/lcmessage.m4 \
2094 ..
/config
/codeset.m4 \
2097 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
2098 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
2101 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
2102 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
2103 cd
$(srcdir) && $(AUTOCONF
)
2105 AUTOHEADER
= autoheader
2106 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
2107 cd
$(srcdir) && $(AUTOHEADER
)
2111 # automatic rebuilding in automake-generated Makefiles requires
2112 # this rule in the toplevel Makefile, which, with GNU make, causes
2113 # the desired updates through the implicit regeneration of the Makefile
2114 # and all of its prerequisites.
2121 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2123 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
2125 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2127 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
2129 # GDB MANUAL: TeX dvi file
2131 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
2133 # GDB MANUAL: info file
2135 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
2137 # Make copying.c from COPYING
2138 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
2139 awk
-f
$(srcdir)/copying.awk \
2140 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
2141 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
2143 version.c
: stamp-version
; @true
2144 # Note that the obvious names for the temp file are taken by
2145 # create-version.sh.
2146 stamp-version
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
2147 $(ECHO_GEN
) $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
2148 $(host_alias
) $(target_alias
) version-t.t
2149 @
$(SHELL
) $(srcdir)/..
/move-if-change version-t.t version.c
2150 @echo stamp
> stamp-version
2153 gdb.cxref
: $(SFILES
)
2154 cxref
-I.
$(SFILES
) >gdb.cxref
2158 # GNU Make has an annoying habit of putting *all* the Makefile variables
2159 # into the environment, unless you include this target as a circumvention.
2160 # Rumor is that this will be fixed (and this target can be removed)
2164 # GNU Make 3.63 has a different problem: it keeps tacking command line
2165 # overrides onto the definition of $(MAKE). This variable setting
2170 aarch64-fbsd-nat.c \
2171 aarch64-fbsd-tdep.c \
2172 aarch64-linux-nat.c \
2173 aarch64-linux-tdep.c \
2174 aarch64-newlib-tdep.c \
2180 alpha-linux-tdep.c \
2181 alpha-mdebug-tdep.c \
2186 amd64-darwin-tdep.c \
2187 amd64-dicos-tdep.c \
2191 amd64-linux-tdep.c \
2204 arm-get-next-pcs.c \
2211 arm-symbian-tdep.c \
2237 i386-cygwin-tdep.c \
2239 i386-darwin-tdep.c \
2256 ia64-libunwind-tdep.c \
2275 microblaze-linux-tdep.c \
2287 mips64-obsd-tdep.c \
2292 nios2-linux-tdep.c \
2305 ppc-ravenscar-thread.c \
2309 ravenscar-thread.c \
2312 riscv-linux-tdep.c \
2315 rs6000-lynx178-tdep.c \
2335 sparc-linux-tdep.c \
2340 sparc-ravenscar-thread.c \
2344 sparc64-fbsd-nat.c \
2345 sparc64-fbsd-tdep.c \
2346 sparc64-linux-nat.c \
2347 sparc64-linux-tdep.c \
2349 sparc64-nbsd-nat.c \
2350 sparc64-nbsd-tdep.c \
2351 sparc64-obsd-nat.c \
2352 sparc64-obsd-tdep.c \
2353 sparc64-sol2-tdep.c \
2358 tilegx-linux-nat.c \
2359 tilegx-linux-tdep.c \
2372 xtensa-linux-nat.c \
2373 xtensa-linux-tdep.c \
2376 common
/mingw-strerror.c \
2377 common
/posix-strerror.c
2379 # Some files need explicit build rules (due to -Werror problems) or due
2380 # to sub-directory fun 'n' games.
2382 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
2383 # checks format strings.
2384 printcmd.o
: $(srcdir)/printcmd.c
2385 $(ECHO_CXX
) $(COMPILE.pre
) $(INTERNAL_CFLAGS
) \
2386 $(GDB_WARN_CFLAGS_NO_FORMAT
) $(COMPILE.post
) \
2387 $(srcdir)/printcmd.c
2390 # Same for "target-float.c".
2391 target-float.o
: $(srcdir)/target-float.c
2392 $(ECHO_CXX
) $(COMPILE.pre
) $(INTERNAL_CFLAGS
) \
2393 $(GDB_WARN_CFLAGS_NO_FORMAT
) $(COMPILE.post
) \
2394 $(srcdir)/target-float.c
2396 # ada-exp.c can appear in srcdir, for releases; or in ., for
2397 # development builds.
2398 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2400 # Some versions of flex give output that triggers
2401 # -Wold-style-definition.
2402 ada-exp.o
: ada-exp.c
2403 $(ECHO_CXX
) $(COMPILE.pre
) $(INTERNAL_CFLAGS
) \
2404 $(GDB_WARN_CFLAGS_NO_DEFS
) $(COMPILE.post
) $(ADA_EXP_C
)
2407 # Message files. Based on code in gcc/Makefile.in.
2409 # Rules for generating translated message descriptions. Disabled by
2410 # autoconf if the tools are not available.
2412 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
2416 # This notation should be acceptable to all Make implementations used
2417 # by people who are interested in updating .po files.
2418 update-po
: $(CATALOGS
:.gmo
=.pox
)
2420 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2423 -test -d po || mkdir po
2424 $(GMSGFMT
) --statistics
-o
$@
$<
2426 # The new .po has to be gone over by hand, so we deposit it into
2427 # build/po with a different extension. If build/po/$(PACKAGE).pot
2428 # exists, use it (it was just created), else use the one in srcdir.
2430 -test -d po || mkdir po
2431 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
2432 then echo po/$(PACKAGE).pot; \
2433 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
2435 # This rule has to look for .gmo modules in both srcdir and the cwd,
2436 # and has to check that we actually have a catalog for each language,
2437 # in case they weren't built or included with the distribution.
2439 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
2440 cats
="$(CATALOGS)"; for cat in
$$cats; do \
2441 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
2442 if
[ -f
$$cat ]; then
:; \
2443 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
2446 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
2447 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
2448 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
2449 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2450 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2453 cats
="$(CATALOGS)"; for cat in
$$cats; do \
2454 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
2455 if
[ -f
$$cat ]; then
:; \
2456 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
2459 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
2460 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2462 # Delete po/*.gmo only if we are not building in the source directory.
2464 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
2466 # Rule for regenerating the message template (gdb.pot). Instead of
2467 # forcing everyone to edit POTFILES.in, which proved impractical, this
2468 # rule has no dependencies and always regenerates gdb.pot. This is
2469 # relatively harmless since the .po files do not directly depend on
2470 # it. The .pot file is left in the build directory. Since GDB's
2471 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2472 # files) force this rule.
2473 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
2474 po
/$(PACKAGE
).pot
: force
2475 -test -d po || mkdir po
2476 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
2480 # YACC/LEX dependencies
2482 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2483 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2484 # said LANG-exp.c rather than ./c-exp.c some makes would
2485 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2486 # decls for malloc/realloc/free which conflict with everything else.
2487 # Strictly speaking c-exp.c should therefore depend on
2488 # Makefile.in, but that was a pretty big annoyance.
2491 $(ECHO_YACC
) $(SHELL
) $(YLWRAP
) $< y.tab.c
$@.tmp
-- \
2492 $(YACC
) $(YFLAGS
) ||
(rm -f
$@.tmp
; false
)
2493 @sed
-e
'/extern.*malloc/d' \
2494 -e
'/extern.*realloc/d' \
2495 -e
'/extern.*free/d' \
2496 -e
'/include.*malloc.h/d' \
2497 -e
's/\([^x]\)malloc/\1xmalloc/g' \
2498 -e
's/\([^x]\)realloc/\1xrealloc/g' \
2499 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2500 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
2501 -e
'/^#line.*y.tab.c/d' \
2502 -e
's/YY_NULL/YY_NULLPTR/g' \
2503 < $@.tmp
> $@.new
&& \
2507 $(ECHO_LEX
) $(FLEX
) -t
$< \
2508 | sed
-e
'/extern.*malloc/d' \
2509 -e
'/extern.*realloc/d' \
2510 -e
'/extern.*free/d' \
2511 -e
'/include.*malloc.h/d' \
2512 -e
's/\([^x]\)malloc/\1xmalloc/g' \
2513 -e
's/\([^x]\)realloc/\1xrealloc/g' \
2514 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2515 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
2516 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
2520 .PRECIOUS
: ada-lex.c
2524 xml-builtin.c
: stamp-xml
; @true
2525 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
2526 $(SILENCE
) rm -f xml-builtin.tmp
2527 $(ECHO_GEN_XML_BUILTIN
) AWK
="$(AWK)" \
2528 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
2529 xml-builtin.tmp
$(XMLFILES
)
2530 $(SILENCE
) $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
2531 $(SILENCE
) echo stamp
> stamp-xml
2533 .PRECIOUS
: xml-builtin.c
2536 # GDBTK sub-directory
2539 all-gdbtk
: insight
$(EXEEXT
)
2542 transformed_name
=`t='$(program_transform_name)'; \
2543 echo insight | sed -e $$t` ; \
2544 if
test "x$$transformed_name" = x
; then \
2545 transformed_name
=insight
; \
2549 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
2550 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
2551 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2552 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2553 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
2554 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2555 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
2556 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
2557 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
2558 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2559 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
2560 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
2561 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2562 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
2563 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
2564 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
2565 cd
$(srcdir)/gdbtk
/library
; \
2566 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
2568 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
2572 transformed_name
=`t='$(program_transform_name)'; \
2573 echo insight | sed -e $$t` ; \
2574 if
test "x$$transformed_name" = x
; then \
2575 transformed_name
=insight
; \
2579 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2580 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
2583 rm -f insight
$(EXEEXT
)
2585 # Removing the old gdb first works better if it is running, at least on SunOS.
2586 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(CDEPS
) $(TDEPLIBS
)
2587 rm -f insight
$(EXEEXT
)
2588 $(ECHO_CXXLD
) $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2589 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
2590 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2592 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
2593 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
2595 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
2596 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
2598 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
2599 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
2602 # Dependency tracking.
2605 ifeq ($(DEPMODE
),depmode
=gcc3
)
2606 # Note that we put the dependencies into a .Tpo file, then move them
2607 # into place if the compile succeeds. We need this because gcc does
2608 # not atomically write the dependency output file.
2609 override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2610 -MF
$(@D
)/$(DEPDIR
)/$(basename $(@F
)).Tpo
2611 override POSTCOMPILE
= @mv
$(@D
)/$(DEPDIR
)/$(basename $(@F
)).Tpo \
2612 $(@D
)/$(DEPDIR
)/$(basename $(@F
)).Po
2614 override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2615 DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) \
2616 $(CXX
) -x c
++ $(CXX_DIALECT
)
2617 # depcomp handles atomicity for us, so we don't need a postcompile
2619 override POSTCOMPILE
=
2622 # A list of all the objects we might care about in this build, for
2623 # dependency tracking.
2624 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2625 test-cp-name-parser.o
2627 # All the .deps files to include.
2628 all_deps_files
= $(foreach dep
,$(patsubst %.o
,%.Po
,$(all_object_files
)),\
2629 $(dir $(dep
))/$(DEPDIR
)/$(notdir $(dep
)))
2631 # Ensure that generated files are created early. Use order-only
2632 # dependencies if available. They require GNU make 3.80 or newer,
2633 # and the .VARIABLES variable was introduced at the same time.
2635 $(all_object_files
): |
$(generated_files
)
2637 $(all_object_files
) : $(generated_files
)
2641 -include $(all_deps_files
)
2643 # Disable implicit make rules.
2644 include $(srcdir)/disable-implicit-rules.mk
2646 ### end of the gdb Makefile.in.