1 # Copyright (C) 1989-2017 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @
exec_prefix@
40 host_alias
= @host_alias@
41 target_alias
= @target_alias@
42 program_transform_name
= @program_transform_name@
45 tooldir
= $(libdir)/$(target_alias
)
48 localedir
= @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir
= @datarootdir@
64 includedir = @
includedir@
66 install_sh
= @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
80 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA
= @INSTALL_DATA@
101 # If you are compiling with GCC, make sure that either 1) You have the
102 # fixed include files where GCC can reach them, or 2) You use the
103 # -traditional flag. Otherwise the ioctl calls in inflow.c
104 # will be incorrectly compiled. The "fixincludes" script in the gcc
105 # distribution will fix your include files up.
108 CXX_DIALECT
= @CXX_DIALECT@
110 # Dependency tracking information.
111 DEPMODE
= @CCDEPMODE@
113 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
115 # Note that these are overridden by GNU make-specific code below if
116 # GNU make is used. The overrides implement dependency tracking.
117 COMPILE.pre
= $(CXX
) -x c
++ $(CXX_DIALECT
)
118 COMPILE.post
= -c
-o
$@
119 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
122 # Directory containing source files.
125 top_srcdir
= @top_srcdir@
129 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
130 # not defined, but ada-lex.c is present, compilation will continue,
131 # possibly with a warning.
134 YLWRAP
= $(srcdir)/..
/ylwrap
136 # where to find makeinfo, preferably one designed for texinfo-2
137 MAKEINFO
= @MAKEINFO@
138 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
139 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
140 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
142 MAKEHTML
= $(MAKEINFO_CMD
) --html
145 # Set this up with gcc if you have gnu ld and the loader will print out
146 # line numbers for undefined references.
148 CC_LD
= $(CXX
) $(CXX_DIALECT
)
150 # Where is our "include" directory? Typically $(srcdir)/../include.
151 # This is essentially the header file directory for the library
152 # routines in libiberty.
153 INCLUDE_DIR
= $(srcdir)/..
/include
154 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
156 # Where is the "-liberty" library? Typically in ../libiberty.
157 LIBIBERTY
= ..
/libiberty
/libiberty.a
159 # Where is the BFD library? Typically in ../bfd.
161 BFD
= $(BFD_DIR
)/libbfd.a
162 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
163 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
165 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
166 # -I../zlib, unless we were configured with --with-system-zlib, in which
167 # case both are empty.
171 # Where is the decnumber library? Typically in ../libdecnumber.
172 LIBDECNUMBER_DIR
= ..
/libdecnumber
173 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
174 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
175 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
177 # Where is the READLINE library? Typically in ../readline.
178 READLINE_DIR
= ..
/readline
179 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
180 READLINE
= @READLINE@
181 READLINE_DEPS
= @READLINE_DEPS@
182 READLINE_CFLAGS
= @READLINE_CFLAGS@
184 # Where is expat? This will be empty if expat was not available.
185 LIBEXPAT
= @LIBEXPAT@
187 # Where is lzma? This will be empty if lzma was not available.
190 # Where is libbabeltrace? This will be empty if lbabeltrace was not
192 LIBBABELTRACE
= @LIBBABELTRACE@
194 # Where is libipt? This will be empty if libipt was not available.
197 WARN_CFLAGS
= @WARN_CFLAGS@
198 WERROR_CFLAGS
= @WERROR_CFLAGS@
199 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
200 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
202 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
203 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
204 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
205 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
207 RDYNAMIC
= @RDYNAMIC@
209 # Where is the INTL library? Typically in ../intl.
211 INTL_DEPS
= @LIBINTL_DEP@
212 INTL_CFLAGS
= @INCINTL@
214 # Where is the ICONV library? This will be empty if in libc or not available.
215 LIBICONV
= @LIBICONV@
217 # Did the user give us a --with-gdb-datadir option?
218 GDB_DATADIR
= @GDB_DATADIR@
220 # Flags to pass to gdb when invoked with "make run".
223 # Helper code from gnulib.
224 GNULIB_BUILDDIR
= build-gnulib
225 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
226 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
228 # Generated headers in the gnulib directory. These must be listed
229 # so that they are generated before other files are compiled.
230 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
233 # CLI sub directory definitons
260 # MI sub directory definitons
305 # TUI sub directory definitions
342 tui
/tui-wingeneral.c \
347 SUBDIR_TUI_CFLAGS
= -DTUI
=1
350 # GCC Compile support sub-directory definitions
352 SUBDIR_GCC_COMPILE_OBS
= \
354 compile-c-support.o \
355 compile-c-symbols.o \
358 compile-object-load.o \
361 SUBDIR_GCC_COMPILE_SRCS
= \
363 compile
/compile-c-support.c \
364 compile
/compile-c-symbols.c \
365 compile
/compile-c-types.c \
366 compile
/compile-loc2c.c \
367 compile
/compile-object-load.c \
368 compile
/compile-object-load.h \
369 compile
/compile-object-run.c \
370 compile
/compile-object-run.h
373 # Guile sub directory definitons for guile support.
402 SUBDIR_GUILE_SRCS
= \
405 guile
/scm-auto-load.c \
407 guile
/scm-breakpoint.c \
410 guile
/scm-exception.c \
413 guile
/scm-iterator.c \
414 guile
/scm-lazy-string.c \
416 guile
/scm-objfile.c \
419 guile
/scm-pretty-print.c \
420 guile
/scm-progspace.c \
421 guile
/scm-safe-call.c \
430 SUBDIR_GUILE_LDFLAGS
=
431 SUBDIR_GUILE_CFLAGS
=
434 # python sub directory definitons
436 SUBDIR_PYTHON_OBS
= \
448 py-finishbreakpoint.o \
459 py-newobjfileevent.o \
480 SUBDIR_PYTHON_SRCS
= \
482 python
/py-auto-load.c \
484 python
/py-bpevent.c \
485 python
/py-breakpoint.c \
487 python
/py-continueevent.c \
489 python
/py-evtregistry.c \
491 python
/py-exitedevent.c \
492 python
/py-finishbreakpoint.c \
494 python
/py-framefilter.c \
495 python
/py-function.c \
496 python
/py-gdb-readline.c \
497 python
/py-inferior.c \
498 python
/py-infevents.c \
499 python
/py-infthread.c \
500 python
/py-instruction.c \
501 python
/py-lazy-string.c \
502 python
/py-linetable.c \
503 python
/py-newobjfileevent.c \
504 python
/py-objfile.c \
506 python
/py-prettyprint.c \
507 python
/py-progspace.c \
509 python
/py-record-btrace.c \
510 python
/py-record-full.c \
511 python
/py-signalevent.c \
512 python
/py-stopevent.c \
515 python
/py-threadevent.c \
521 python
/py-xmethods.c \
525 SUBDIR_PYTHON_LDFLAGS
=
526 SUBDIR_PYTHON_CFLAGS
=
528 SUBDIR_UNITTESTS_SRCS
= \
529 unittests
/array-view-selftests.c \
530 unittests
/common-utils-selftests.c \
531 unittests
/environ-selftests.c \
532 unittests
/function-view-selftests.c \
533 unittests
/offset-type-selftests.c \
534 unittests
/optional-selftests.c \
535 unittests
/ptid-selftests.c \
536 unittests
/scoped_restore-selftests.c \
537 unittests
/xml-utils-selftests.c
539 SUBDIR_UNITTESTS_OBS
= \
540 array-view-selftests.o \
541 common-utils-selftests.o \
542 environ-selftests.o \
543 function-view-selftests.o \
544 offset-type-selftests.o \
545 optional-selftests.o \
547 scoped_restore-selftests.o \
548 xml-utils-selftests.o
550 # Opcodes currently live in one of two places. Either they are in the
551 # opcode library, typically ../opcodes, or they are in a header file
553 # Where is the "-lopcodes" library, with (some of) the opcode tables and
555 OPCODES_DIR
= ..
/opcodes
556 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
557 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
558 # Where are the other opcode tables which only have header file
560 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
561 # Some source files like to use #include "opcodes/file.h"
562 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
564 # The simulator is usually nonexistent; targets that include one
565 # should set this to list all the .o or .a files to be linked in.
568 WIN32LIBS
= @WIN32LIBS@
570 # Tcl et al cflags and libraries
572 TCL_CFLAGS
= @TCL_INCLUDE@
573 GDBTKLIBS
= @GDBTKLIBS@
574 # Extra flags that the GDBTK files need:
575 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
578 TK_CFLAGS
= @TK_INCLUDE@
580 X11_CFLAGS
= @TK_XINCLUDES@
584 WIN32LDAPP
= @WIN32LDAPP@
587 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
588 IDE_CFLAGS
= $(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
590 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
592 # The version of gdbtk we're building. This should be kept
593 # in sync with GDBTK_VERSION and friends in gdbtk.h.
595 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
597 # Gdbtk requires an absolute path to the source directory or
598 # the testsuite won't run properly.
599 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
612 SUBDIR_GDBTK_SRCS
= \
613 gdbtk
/generic
/gdbtk.c \
614 gdbtk
/generic
/gdbtk-bp.c \
615 gdbtk
/generic
/gdbtk-cmds.c \
616 gdbtk
/generic
/gdbtk-hooks.c \
617 gdbtk
/generic
/gdbtk-interp.c \
618 gdbtk
/generic
/gdbtk-main.c \
619 gdbtk
/generic
/gdbtk-register.c \
620 gdbtk
/generic
/gdbtk-stack.c \
621 gdbtk
/generic
/gdbtk-varobj.c \
622 gdbtk
/generic
/gdbtk-wrapper.c
624 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
625 SUBDIR_GDBTK_LDFLAGS
=
626 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
628 CONFIG_OBS
= @CONFIG_OBS@
629 CONFIG_SRCS
= @CONFIG_SRCS@
630 CONFIG_DEPS
= @CONFIG_DEPS@
631 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
632 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
633 CONFIG_ALL
= @CONFIG_ALL@
634 CONFIG_CLEAN
= @CONFIG_CLEAN@
635 CONFIG_INSTALL
= @CONFIG_INSTALL@
636 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
637 CONFIG_SRC_SUBDIR
= @CONFIG_SRC_SUBDIR@
638 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
640 # -I. for config files.
641 # -I$(srcdir) for gdb internal headers.
642 # -I$(srcdir)/config for more generic config files.
644 # It is also possible that you will need to add -I/usr/include/sys if
645 # your system doesn't have fcntl.h in /usr/include (which is where it
646 # should be according to Posix).
648 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
649 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
651 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
652 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
654 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
656 # These are specifically reserved for setting from the command line
657 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
659 CXXFLAGS
= @CXXFLAGS@
661 # Set by configure, for e.g. expat. Python installations are such that
662 # C headers are included using their basename (for example, we #include
663 # <Python.h> rather than, say, <python/Python.h>). Since the file names
664 # are sometimes a little generic, we think that the risk of collision
665 # with other header files is high. If that happens, we try to mitigate
666 # a bit the consequences by putting the Python includes last in the list.
667 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
669 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
670 INTERNAL_CFLAGS_BASE
= \
671 $(CXXFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
672 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) $(ZLIBINC
) \
673 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
674 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
675 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
676 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
678 # LDFLAGS is specifically reserved for setting from the command line
682 # Profiling options need to go here to work.
683 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
684 # and have it work; that's why CFLAGS is here.
685 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
687 $(CXXFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) \
688 $(LDFLAGS
) $(CONFIG_LDFLAGS
)
690 # If your system is missing alloca(), or, more likely, it's there but
691 # it doesn't work, then refer to libiberty.
693 # Libraries and corresponding dependencies for compiling gdb.
694 # XM_CLIBS, defined in *config files, have host-dependent libs.
695 # LIBIBERTY appears twice on purpose.
696 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(ZLIB
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
697 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
698 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
699 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) $(LIBIPT
) \
700 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
) $(LIBICONV
)
701 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
702 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
704 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
705 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
709 LINT
= /usr
/5bin
/lint
710 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
711 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
717 # XML files to build in to GDB.
719 $(srcdir)/features
/btrace.dtd \
720 $(srcdir)/features
/btrace-conf.dtd \
721 $(srcdir)/features
/gdb-target.dtd \
722 $(srcdir)/features
/library-list.dtd \
723 $(srcdir)/features
/library-list-aix.dtd \
724 $(srcdir)/features
/library-list-svr4.dtd \
725 $(srcdir)/features
/osdata.dtd \
726 $(srcdir)/features
/threads.dtd \
727 $(srcdir)/features
/traceframe-info.dtd \
728 $(srcdir)/features
/xinclude.dtd
730 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
731 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
732 # etc., then there will be (as part of the C library or perhaps as
733 # part of libiberty) a POSIX interface. But at least for now the
734 # host-dependent makefile fragment might need to use something else
736 SER_HARDWIRE
= @SER_HARDWIRE@
738 # The `remote' debugging target is supported for most architectures,
739 # but not all (e.g. 960)
752 # This is remote-sim.o if a simulator is to be linked in.
755 # Target-dependent object files.
756 TARGET_OBS
= @TARGET_OBS@
758 # All target-dependent objects files that require 64-bit CORE_ADDR
759 # (used with --enable-targets=all --enable-64-bit-bfd).
760 ALL_64_TARGET_OBS
= \
761 aarch64-fbsd-tdep.o \
762 aarch64-linux-tdep.o \
763 aarch64-newlib-tdep.o \
767 alpha-mdebug-tdep.o \
771 amd64-darwin-tdep.o \
779 amd64-windows-tdep.o \
780 arch
/aarch64-insn.o \
786 sparc64-fbsd-tdep.o \
787 sparc64-linux-tdep.o \
788 sparc64-nbsd-tdep.o \
789 sparc64-obsd-tdep.o \
790 sparc64-sol2-tdep.o \
793 # All other target-dependent objects files (used with --enable-targets=all).
797 arch
/arm-get-next-pcs.o \
852 microblaze-linux-tdep.o \
859 mn10300-linux-tdep.o \
874 ppc-ravenscar-thread.o \
880 rs6000-lynx178-tdep.o \
899 sparc-ravenscar-thread.o \
907 tilegx-linux-tdep.o \
916 xtensa-linux-tdep.o \
919 # The following native-target dependent variables are defined on
921 NAT_FILE
= @NAT_FILE@
922 NATDEPFILES
= @NATDEPFILES@
923 NAT_CDEPS
= @NAT_CDEPS@
924 LOADLIBES
= @LOADLIBES@
925 MH_CFLAGS
= @MH_CFLAGS@
926 XM_CLIBS
= @XM_CLIBS@
927 NAT_GENERATED_FILES
= @NAT_GENERATED_FILES@
928 HAVE_NATIVE_GCORE_HOST
= @HAVE_NATIVE_GCORE_HOST@
930 # Native-target dependent makefile fragment comes in here.
933 # End of native-target dependent variables.
937 "exec_prefix=$(exec_prefix)" \
938 "infodir=$(infodir)" \
939 "datarootdir=$(datarootdir)" \
941 "htmldir=$(htmldir)" \
945 "datadir=$(datadir)" \
946 "includedir=$(includedir)" \
947 "against=$(against)" \
948 "DESTDIR=$(DESTDIR)" \
950 "AR_FLAGS=$(AR_FLAGS)" \
954 "CXX_DIALECT=$(CXX_DIALECT)" \
955 "CXXFLAGS=$(CXXFLAGS)" \
956 "DLLTOOL=$(DLLTOOL)" \
957 "LDFLAGS=$(LDFLAGS)" \
959 "MAKEINFO=$(MAKEINFO)" \
960 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
961 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
962 "MAKEHTML=$(MAKEHTML)" \
963 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
964 "INSTALL=$(INSTALL)" \
965 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
966 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
967 "INSTALL_DATA=$(INSTALL_DATA)" \
968 "RUNTEST=$(RUNTEST)" \
969 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
971 # Flags that we pass when building the testsuite.
973 # empty for native, $(target_alias)/ for cross
974 target_subdir
= @target_subdir@
977 if [ -f $${rootme}/../gcc/xgcc ] ; then \
978 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
979 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
981 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
984 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
987 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
992 if [ -f $${rootme}/../gcc/xg++ ] ; then \
993 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
994 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
996 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
999 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
1002 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
1006 # The use of $$(x_FOR_TARGET) reduces the command line length by not
1007 # duplicating the lengthy definition.
1008 TARGET_FLAGS_TO_PASS
= \
1009 "prefix=$(prefix)" \
1010 "exec_prefix=$(exec_prefix)" \
1011 "against=$(against)" \
1012 'CC=$$(CC_FOR_TARGET)' \
1013 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
1014 "CFLAGS=$(CFLAGS)" \
1015 'CXX=$$(CXX_FOR_TARGET)' \
1016 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
1017 "CXXFLAGS=$(CXXFLAGS)" \
1018 "INSTALL=$(INSTALL)" \
1019 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
1020 "INSTALL_DATA=$(INSTALL_DATA)" \
1021 "MAKEINFO=$(MAKEINFO)" \
1022 "MAKEHTML=$(MAKEHTML)" \
1023 "RUNTEST=$(RUNTEST)" \
1024 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
1025 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
1028 # All source files that go into linking GDB.
1029 # Links made at configuration time should not be specified here, since
1030 # SFILES is used in building the distribution archive.
1053 break-catch-syscall.c \
1054 break-catch-throw.c \
1089 disasm-selftests.c \
1094 dwarf2-frame-tailcall.c \
1123 gdbarch-selftests.c \
1179 progspace-and-thread.c \
1216 target-descriptions.c \
1239 common
/btrace-common.c \
1242 common
/common-debug.c \
1243 common
/common-exceptions.c \
1244 common
/common-regcache.c \
1245 common
/common-utils.c \
1249 common
/filestuff.c \
1251 common
/job-control.c \
1252 common
/gdb_tilde_expand.c \
1255 common
/print-utils.c \
1258 common
/run-time-clock.c \
1261 common
/signals-state-save-restore.c \
1263 common
/xml-utils.c \
1265 target
/waitstatus.c \
1266 $(SUBDIR_GCC_COMPILE_SRCS
)
1268 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
1270 # Header files that need to have srcdir added. Note that in the cases
1271 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1272 # so that each .h file is listed exactly once (M-x tags-search works
1273 # wrong if TAGS has files twice). Because this is tricky to get
1274 # right, it is probably easiest just to list .h files here directly.
1276 HFILES_NO_SRCDIR
= \
1282 amd64-darwin-tdep.h \
1283 amd64-linux-tdep.h \
1326 dwarf2-frame-tailcall.h \
1352 gdb_proc_service.h \
1369 hppa-linux-offsets.h \
1372 i386-darwin-tdep.h \
1377 ia64-libunwind-tdep.h \
1430 ppc-ravenscar-thread.h \
1437 progspace-and-thread.h \
1441 ravenscar-thread.h \
1475 sparc-ravenscar-thread.h \
1486 target-descriptions.h \
1514 arch
/aarch64-insn.h \
1524 common
/common-debug.h \
1525 common
/common-defs.h \
1526 common
/common-exceptions.h \
1527 common
/common-gdbthread.h \
1528 common
/common-regcache.h \
1529 common
/common-types.h \
1530 common
/common-utils.h \
1531 common
/job-control.h \
1536 common
/gdb_assert.h \
1537 common
/gdb_tilde_expand.h \
1538 common
/gdb_locale.h \
1539 common
/gdb_setjmp.h \
1540 common
/gdb_signals.h \
1541 common
/gdb_sys_time.h \
1542 common
/gdb_termios.h \
1545 common
/common-inferior.h \
1546 common
/host-defs.h \
1547 common
/print-utils.h \
1551 common
/run-time-clock.h \
1552 common
/signals-state-save-restore.h \
1556 common
/x86-xstate.h \
1557 common
/xml-utils.h \
1561 config
/djgpp
/langinfo.h \
1562 config
/djgpp
/nl_types.h \
1563 config
/i386
/nm-fbsd.h \
1564 config
/i386
/nm-i386gnu.h \
1565 config
/sparc
/nm-sol2.h \
1566 gnulib
/import
/inttypes.in.h \
1567 gnulib
/import
/stddef.in.h \
1568 gnulib
/import
/stdint.in.h \
1569 gnulib
/import
/str-two-way.h \
1570 gnulib
/import
/string.in.h \
1571 gnulib
/import
/extra
/snippet
/arg-nonnull.h \
1572 gnulib
/import
/extra
/snippet
/c
++defs.h \
1573 gnulib
/import
/extra
/snippet
/warn-on-use.h \
1581 nat
/aarch64-linux.h \
1582 nat
/aarch64-linux-hw-point.h \
1583 nat
/amd64-linux-siginfo.h \
1585 nat
/gdb_thread_db.h \
1586 nat
/fork-inferior.h \
1587 nat
/linux-btrace.h \
1588 nat
/linux-namespaces.h \
1590 nat
/linux-osdata.h \
1591 nat
/linux-personality.h \
1592 nat
/linux-ptrace.h \
1593 nat
/linux-waitpid.h \
1594 nat
/mips-linux-watch.h \
1598 nat
/x86-gcc-cpuid.h \
1600 nat
/x86-linux-dregs.h \
1602 python
/py-events.h \
1603 python
/py-stopevent.h \
1605 python
/python-internal.h \
1606 regformats
/regdef.h \
1610 target
/waitstatus.h \
1624 tui
/tui-wingeneral.h \
1627 # Header files that already have srcdir in them, or which are in objdir.
1629 HFILES_WITH_SRCDIR
= \
1633 # GDB "info" files, which should be included in their entirety
1634 INFOFILES
= gdb.
info*
1636 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1637 # default their values the way we do for SER_HARDWIRE; in the future
1638 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1639 # variables analogous to SER_HARDWIRE which get defaulted in this
1642 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
1643 $(REMOTE_OBS
) $(SIM_OBS
)
1645 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
1646 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1647 # and it's more useful to see it in the .y file.
1648 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
1650 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
1652 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
1669 break-catch-syscall.o \
1670 break-catch-throw.o \
1688 common-exceptions.o \
1711 disasm-selftests.o \
1715 dwarf2-frame-tailcall.o \
1732 filename-seen-cache.o \
1743 gdb_tilde_expand.o \
1750 gdbarch-selftests.o \
1804 progspace-and-thread.o \
1824 signals-state-save-restore.o \
1838 target-descriptions.o \
1864 $(SUBDIR_GCC_COMPILE_OBS
)
1868 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1869 CLEANDIRS
= $(SUBDIRS
)
1871 # List of subdirectories in the build tree that must exist.
1872 # This is used to force build failures in existing trees when
1873 # a new directory is added.
1874 # The format here is for the `case' shell command.
1875 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1877 # For now, shortcut the "configure GDB for fewer languages" stuff.
1901 # Things which need to be built when making a distribution.
1903 DISTSTUFF
= $(YYFILES
)
1906 # All generated files which can be included by another file.
1915 $(NAT_GENERATED_FILES
)
1917 # Flags needed to compile Python code
1918 PYTHON_CFLAGS
= @PYTHON_CFLAGS@
1920 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1921 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1923 # Rule for compiling .c files in the top-level gdb directory.
1928 # Rules for compiling .c files in the various source subdirectories.
1929 %.o
: $(srcdir)/cli
/%.c
1933 %.o
: ${srcdir}/common
/%.c
1937 %.o
: $(srcdir)/compile
/%.c
1941 %.o
: $(srcdir)/gdbtk
/generic
/%.c
1942 $(COMPILE
) $(all_gdbtk_cflags
) $<
1945 %.o
: $(srcdir)/guile
/%.c
1949 %.o
: $(srcdir)/mi
/%.c
1953 %.o
: ${srcdir}/nat
/%.c
1957 %.o
: $(srcdir)/python
/%.c
1958 $(COMPILE
) $(PYTHON_CFLAGS
) $<
1961 %.o
: ${srcdir}/target
/%.c
1965 %.o
: $(srcdir)/tui
/%.c
1969 %.o
: ${srcdir}/unittests
/%.c
1973 # Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
1974 # object file generate by gdb/agent.c.
1975 common-agent.o
: $(srcdir)/common
/agent.c
1976 $(COMPILE
) $(srcdir)/common
/agent.c
1981 # The check target can not use subdir_do, because subdir_do does not
1982 # use TARGET_FLAGS_TO_PASS.
1984 @if
[ -f testsuite
/Makefile
]; then \
1985 rootme
=`pwd`; export rootme
; \
1986 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1988 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1992 @if
[ -f testsuite
/Makefile
]; then \
1993 rootme
=`pwd`; export rootme
; \
1994 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1996 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
2000 @if
[ -f testsuite
/Makefile
]; then \
2001 rootme
=`pwd`; export rootme
; \
2002 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
2004 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-read1
; \
2007 check-parallel
: force
2008 @if
[ -f testsuite
/Makefile
]; then \
2009 rootme
=`pwd`; export rootme
; \
2010 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
2012 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-parallel
; \
2015 # The idea is to parallelize testing of multilibs, for example:
2016 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
2017 # will run 3 concurrent sessions of check, eventually testing all 10
2018 # combinations. GNU make is required for the % pattern to work, as is
2019 # a shell that expands alternations within braces. If GNU make is not
2020 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
2021 # prevent serialized checking due to the passed RUNTESTFLAGS.
2022 # FIXME: use config.status --config not --version, when available.
2024 @if
[ -f testsuite
/config.status
]; then \
2025 rootme
=`pwd`; export rootme
; \
2026 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
2027 target
=`echo "$@" | sed 's,//.*,,'`; \
2028 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
2029 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
2030 testdir
=testsuite.
$$vardots; \
2031 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
2032 configargs
=`cd testsuite && ./config.status --version | \
2033 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
2034 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
2036 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
2037 "\"--srcdir=\$$rootsrc/testsuite\"" \
2039 else :; fi
&& cd
$$testdir && \
2040 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
2041 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
2042 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
2046 # The set of headers checked by 'check-headers' by default.
2047 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
2049 # Try to compile each header in isolation, thus ensuring headers are
2052 # Defaults to checking all $HFILES_NO_SRCDIR headers.
2056 # make check-headers CHECK_HEADERS="header.h list.h"
2058 # to check specific headers.
2061 @echo Checking headers.
2062 for i in
$(CHECK_HEADERS
) ; do \
2063 $(CXX
) $(CXX_DIALECT
) -x c
++-header
-c
-fsyntax-only \
2064 $(INTERNAL_CFLAGS
) -include defs.h
$(srcdir)/$$i ; \
2066 .PHONY
: check-headers
2068 info install-info clean-info
dvi pdf install-pdf html install-html
: force
2069 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
2071 # Traditionally "install" depends on "all". But it may be useful
2072 # not to; for example, if the user has made some trivial change to a
2073 # source file and doesn't care about rebuilding or just wants to save the
2074 # time it takes for make to check that all is up to date.
2075 # install-only is intended to address that need.
2077 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
2079 install-only
: $(CONFIG_INSTALL
)
2080 transformed_name
=`t='$(program_transform_name)'; \
2081 echo gdb | sed -e "$$t"` ; \
2082 if
test "x$$transformed_name" = x
; then \
2083 transformed_name
=gdb
; \
2087 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
2088 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
2089 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2090 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
2091 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
2092 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
2094 transformed_name
=`t='$(program_transform_name)'; \
2095 echo gcore | sed -e "$$t"` ; \
2096 if
test "x$$transformed_name" = x
; then \
2097 transformed_name
=gcore
; \
2101 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
2102 $(INSTALL_SCRIPT
) gcore \
2103 $(DESTDIR
)$(bindir)/$$transformed_name; \
2105 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
2108 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
2109 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
2110 `test -z '$(STRIP)' || \
2111 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
2114 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
2117 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
2119 uninstall: force $(CONFIG_UNINSTALL
)
2120 transformed_name
=`t='$(program_transform_name)'; \
2121 echo gdb | sed -e $$t` ; \
2122 if
test "x$$transformed_name" = x
; then \
2123 transformed_name
=gdb
; \
2127 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
2128 $(DESTDIR
)$(man1dir)/$$transformed_name.1
2129 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
2131 transformed_name
=`t='$(program_transform_name)'; \
2132 echo gcore | sed -e "$$t"` ; \
2133 if
test "x$$transformed_name" = x
; then \
2134 transformed_name
=gcore
; \
2138 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
2140 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
2142 # The C++ name parser can be built standalone for testing.
2143 test-cp-name-parser.o
: cp-name-parser.c
2144 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
2147 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
2148 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
2149 test-cp-name-parser.o
$(LIBIBERTY
)
2151 # We do this by grepping through sources. If that turns out to be too slow,
2152 # maybe we could just require every .o file to have an initialization routine
2153 # of a given name (top.o -> _initialize_top, etc.).
2155 # Formatting conventions: The name of the _initialize_* routines must start
2156 # in column zero, and must not be inside #if.
2158 # Note that the set of files with init functions might change, or the names
2159 # of the functions might change, so this files needs to depend on all the
2160 # object files that will be linked into gdb.
2162 # FIXME: There is a problem with this approach - init.c may force
2163 # unnecessary files to be linked in.
2165 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
2166 # the first call is to _initialize_gdbtypes (implemented by explicitly
2167 # putting that function's name first in the init.l-tmp file). This is
2168 # a hack to ensure that all the architecture dependant global
2169 # builtin_type_* variables are initialized before anything else
2170 # (per-architecture code is called in the same order that it is
2171 # registered). The ``correct fix'' is to have all the builtin types
2172 # made part of the architecture and initialize them on-demand (using
2173 # gdbarch_data) just like everything else. The catch is that other
2174 # modules still take the address of these builtin types forcing them
2175 # to be variables, sigh!
2177 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
2178 # anchored on the first column and excludes the ``/'' character so
2179 # that it doesn't add the $(srcdir) prefix to any file that already
2180 # has an absolute path. It turns out that $(DEC)'s True64 make
2181 # automatically adds the $(srcdir) prefixes when it encounters files
2182 # in sub-directories such as cli/ and mi/.
2184 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
2185 # duplicates. Files in the gdb/ directory can end up appearing in
2186 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
2188 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
) $(SUBDIR_GCC_COMPILE_SRCS
)
2189 init.c
: $(INIT_FILES
)
2191 @
rm -f init.c-tmp init.l-tmp
2193 @echo gdbtypes
> init.l-tmp
2194 @
-LANG
=C
; export LANG
; \
2195 LC_ALL
=C
; export LC_ALL
; \
2196 echo
$(INIT_FILES
) | \
2199 -e
'/^gdbtypes.[co]$$/d' \
2200 -e
'/^init.[co]$$/d' \
2201 -e
'/xdr_ld.[co]$$/d' \
2202 -e
'/xdr_ptrace.[co]$$/d' \
2203 -e
'/xdr_rdb.[co]$$/d' \
2204 -e
'/udr.[co]$$/d' \
2205 -e
'/udip2soc.[co]$$/d' \
2206 -e
'/udi2go32.[co]$$/d' \
2207 -e
'/version.[co]$$/d' \
2208 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
2209 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
2210 -e
's/-exp\.o$$/-exp.y/' \
2211 -e
's/\.[co]$$/.c/' \
2212 -e
's,signals\.c,common/signals\.c,' \
2213 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
2215 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
2220 * ) echo
$$f ; fs
="$$fs $$f";; \
2223 @echo
'/* Do not modify this file. */' >>init.c-tmp
2224 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
2225 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
2226 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
2227 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
2228 @echo
'void' >>init.c-tmp
2229 @echo
'initialize_all_files (void)' >>init.c-tmp
2230 @echo
'{' >>init.c-tmp
2231 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
2232 @echo
'}' >>init.c-tmp
2234 @mv init.c-tmp init.c
2238 # Create a library of the gdb object files and build GDB by linking
2241 # init.o is very important. It pulls in the rest of GDB.
2242 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
2243 libgdb.a
: $(LIBGDB_OBS
)
2245 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
2248 # Removing the old gdb first works better if it is running, at least on SunOS.
2249 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
2251 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2252 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
2253 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2255 # Convenience rule to handle recursion.
2256 $(LIBGNU
) $(GNULIB_H
): all-lib
2257 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
2258 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
2261 # Convenience rule to handle recursion.
2262 .PHONY
: all-data-directory
2263 all-data-directory
: data-directory
/Makefile
2264 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
2266 # This is useful when debugging GDB, because some Unix's don't let you run GDB
2267 # on itself without copying the executable. So "make gdb1" will make
2268 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
2269 # Removing gdb1 before the copy is the right thing if gdb1 is open
2270 # in another process.
2271 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
2273 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
2275 # Put the proper machine-specific files first, so M-. on a machine
2276 # specific routine gets the one for the correct machine. (FIXME: those
2277 # files go in twice; we should be removing them from the main list).
2279 # TAGS depends on all the files that go into it so you can rebuild TAGS
2280 # with `make TAGS' and not have to say `rm TAGS' first.
2282 GDB_NM_FILE
= @GDB_NM_FILE@
2283 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
2285 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
2286 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
2287 echo $(srcdir)/$$i ; \
2288 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
2290 done) | sed -e 's/\.o$$/\.c/'` \
2291 `find $(srcdir)/config -name '*.h' -print`
2295 clean mostlyclean: $(CONFIG_CLEAN
)
2296 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
2297 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
2298 rm -f init.c version.c observer.h observer.inc
2299 rm -f gdb
$(EXEEXT
) core make.log
2300 rm -f gdb
[0-9]$(EXEEXT
)
2301 rm -f test-cp-name-parser
$(EXEEXT
)
2302 rm -f xml-builtin.c stamp-xml
2304 for i in
$(CONFIG_SRC_SUBDIR
); do \
2306 rm -f
$$i/$(DEPDIR
)/*; \
2309 # This used to depend on c-exp.c m2-exp.c TAGS
2310 # I believe this is wrong; the makefile standards for distclean just
2311 # describe removing files; the only sort of "re-create a distribution"
2312 # functionality described is if the distributed files are unmodified.
2313 # NB: While GDBSERVER might be configured on native systems, it isn't
2314 # always included in SUBDIRS. Remove the gdbserver files explicitly.
2316 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
2317 rm -rf
$(GNULIB_BUILDDIR
)
2318 rm -f gdbserver
/config.status gdbserver
/config.log
2319 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
2320 rm -f gdbserver
/Makefile gdbserver
/config.cache
2321 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
2322 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
2323 rm -f config.log config.cache
2326 for i in
$(CONFIG_SRC_SUBDIR
); do \
2327 rmdir
$$i/$(DEPDIR
); \
2330 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
2331 realclean: maintainer-clean
2333 local-maintainer-clean
:
2334 @echo
"This command is intended for maintainers to use;"
2335 @echo
"it deletes files that may require special tools to rebuild."
2338 ada-lex.c ada-exp.c \
2339 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
2340 rm -f TAGS
$(INFOFILES
)
2342 rm -f nm.h config.status
2344 do-maintainer-clean
:
2345 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
2348 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
2349 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
2352 @for i in
$(DODIRS
); do \
2354 $(REQUIRED_SUBDIRS
)) \
2355 if
[ ! -f .
/$$i/Makefile
] ; then \
2356 echo
"Missing $$i/Makefile" >&2 ; \
2360 if
[ -f .
/$$i/Makefile
] ; then \
2362 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
2363 else exit
1 ; fi
; \
2367 Makefile
: Makefile.in config.status
2368 # Regenerate the Makefile and the tm.h / nm.h links.
2369 CONFIG_FILES
="Makefile" \
2372 $(SHELL
) config.status
2374 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status
2375 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
2376 CONFIG_COMMANDS
="depfiles" \
2379 $(SHELL
) config.status
2381 data-directory
/Makefile
: data-directory
/Makefile.in config.status
2382 CONFIG_FILES
="data-directory/Makefile" \
2383 CONFIG_COMMANDS
="depfiles" \
2386 $(SHELL
) config.status
2390 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
2392 jit-reader.h
: $(srcdir)/jit-reader.in
2393 $(SHELL
) config.status
$@
2395 gcore
: $(srcdir)/gcore.in
2396 $(SHELL
) config.status
$@
2398 config.h
: stamp-h
; @true
2399 stamp-h
: $(srcdir)/config.in config.status
2400 CONFIG_HEADERS
=config.h
:config.in \
2401 CONFIG_COMMANDS
="default depdir" \
2404 $(SHELL
) config.status
2406 config.status
: $(srcdir)/configure configure.tgt configure.host ..
/bfd
/development.sh
2407 $(SHELL
) config.status
--recheck
2410 ACLOCAL_AMFLAGS
= -I ..
/config
2412 # Keep these in sync with the includes in acinclude.m4.
2415 acx_configure_dir.m4 \
2419 ..
/config
/acinclude.m4 \
2420 ..
/config
/plugins.m4 \
2421 ..
/config
/lead-dot.m4 \
2422 ..
/config
/override.m4 \
2423 ..
/config
/largefile.m4 \
2424 ..
/config
/gettext-sister.m4 \
2425 ..
/config
/lib-ld.m4 \
2426 ..
/config
/lib-prefix.m4 \
2427 ..
/config
/lib-link.m4 \
2430 ..
/config
/depstand.m4 \
2431 ..
/config
/lcmessage.m4 \
2432 ..
/config
/codeset.m4 \
2435 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
2436 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
2439 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
2440 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
2441 cd
$(srcdir) && $(AUTOCONF
)
2443 AUTOHEADER
= autoheader
2444 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
2445 cd
$(srcdir) && $(AUTOHEADER
)
2449 # automatic rebuilding in automake-generated Makefiles requires
2450 # this rule in the toplevel Makefile, which, with GNU make, causes
2451 # the desired updates through the implicit regeneration of the Makefile
2452 # and all of its prerequisites.
2459 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2461 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
2463 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2465 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
2467 # GDB MANUAL: TeX dvi file
2469 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
2471 # GDB MANUAL: info file
2473 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
2475 # Make copying.c from COPYING
2476 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
2477 awk
-f
$(srcdir)/copying.awk \
2478 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
2479 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
2481 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
2482 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
2483 $(host_alias
) $(target_alias
) version.c
2485 observer.h
: observer.sh doc
/observer.texi
2486 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
2488 observer.inc
: observer.sh doc
/observer.texi
2489 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
2492 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
2493 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
2495 gdb.cxref
: $(SFILES
)
2496 cxref
-I.
$(SFILES
) >gdb.cxref
2500 # GNU Make has an annoying habit of putting *all* the Makefile variables
2501 # into the environment, unless you include this target as a circumvention.
2502 # Rumor is that this will be fixed (and this target can be removed)
2506 # GNU Make 3.63 has a different problem: it keeps tacking command line
2507 # overrides onto the definition of $(MAKE). This variable setting
2512 aarch64-fbsd-nat.c \
2513 aarch64-fbsd-tdep.c \
2514 aarch64-linux-nat.c \
2515 aarch64-linux-tdep.c \
2516 aarch64-newlib-tdep.c \
2522 alpha-linux-tdep.c \
2523 alpha-mdebug-tdep.c \
2528 amd64-darwin-tdep.c \
2529 amd64-dicos-tdep.c \
2533 amd64-linux-tdep.c \
2544 arm-get-next-pcs.c \
2551 arm-symbian-tdep.c \
2581 i386-cygwin-tdep.c \
2583 i386-darwin-tdep.c \
2600 ia64-libunwind-tdep.c \
2621 microblaze-linux-tdep.c \
2633 mips64-obsd-tdep.c \
2638 nios2-linux-tdep.c \
2651 ppc-ravenscar-thread.c \
2655 ravenscar-thread.c \
2658 rs6000-lynx178-tdep.c \
2678 sparc-linux-tdep.c \
2683 sparc-ravenscar-thread.c \
2687 sparc64-fbsd-nat.c \
2688 sparc64-fbsd-tdep.c \
2689 sparc64-linux-nat.c \
2690 sparc64-linux-tdep.c \
2692 sparc64-nbsd-nat.c \
2693 sparc64-nbsd-tdep.c \
2694 sparc64-obsd-nat.c \
2695 sparc64-obsd-tdep.c \
2696 sparc64-sol2-tdep.c \
2701 tilegx-linux-nat.c \
2702 tilegx-linux-tdep.c \
2714 xtensa-linux-nat.c \
2715 xtensa-linux-tdep.c \
2718 common
/mingw-strerror.c \
2719 common
/posix-strerror.c
2721 # Some files need explicit build rules (due to -Werror problems) or due
2722 # to sub-directory fun 'n' games.
2724 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
2725 # checks format strings.
2726 printcmd.o
: $(srcdir)/printcmd.c
2727 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
2728 $(COMPILE.post
) $(srcdir)/printcmd.c
2731 # ada-exp.c can appear in srcdir, for releases; or in ., for
2732 # development builds.
2733 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2735 # Some versions of flex give output that triggers
2736 # -Wold-style-definition.
2737 ada-exp.o
: ada-exp.c
2738 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
2739 $(COMPILE.post
) $(ADA_EXP_C
)
2742 # Message files. Based on code in gcc/Makefile.in.
2744 # Rules for generating translated message descriptions. Disabled by
2745 # autoconf if the tools are not available.
2747 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
2751 # This notation should be acceptable to all Make implementations used
2752 # by people who are interested in updating .po files.
2753 update-po
: $(CATALOGS
:.gmo
=.pox
)
2755 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2758 -test -d po || mkdir po
2759 $(GMSGFMT
) --statistics
-o
$@
$<
2761 # The new .po has to be gone over by hand, so we deposit it into
2762 # build/po with a different extension. If build/po/$(PACKAGE).pot
2763 # exists, use it (it was just created), else use the one in srcdir.
2765 -test -d po || mkdir po
2766 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
2767 then echo po/$(PACKAGE).pot; \
2768 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
2770 # This rule has to look for .gmo modules in both srcdir and the cwd,
2771 # and has to check that we actually have a catalog for each language,
2772 # in case they weren't built or included with the distribution.
2774 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
2775 cats
="$(CATALOGS)"; for cat in
$$cats; do \
2776 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
2777 if
[ -f
$$cat ]; then
:; \
2778 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
2781 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
2782 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
2783 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
2784 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2785 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2788 cats
="$(CATALOGS)"; for cat in
$$cats; do \
2789 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
2790 if
[ -f
$$cat ]; then
:; \
2791 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
2794 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
2795 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2797 # Delete po/*.gmo only if we are not building in the source directory.
2799 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
2801 # Rule for regenerating the message template (gdb.pot). Instead of
2802 # forcing everyone to edit POTFILES.in, which proved impractical, this
2803 # rule has no dependencies and always regenerates gdb.pot. This is
2804 # relatively harmless since the .po files do not directly depend on
2805 # it. The .pot file is left in the build directory. Since GDB's
2806 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2807 # files) force this rule.
2808 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
2809 po
/$(PACKAGE
).pot
: force
2810 -test -d po || mkdir po
2811 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
2815 # YACC/LEX dependencies
2817 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2818 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2819 # said LANG-exp.c rather than ./c-exp.c some makes would
2820 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2821 # decls for malloc/realloc/free which conflict with everything else.
2822 # Strictly speaking c-exp.c should therefore depend on
2823 # Makefile.in, but that was a pretty big annoyance.
2827 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
2828 ||
(rm -f
$@
; false
)
2829 sed
-e
'/extern.*malloc/d' \
2830 -e
'/extern.*realloc/d' \
2831 -e
'/extern.*free/d' \
2832 -e
'/include.*malloc.h/d' \
2833 -e
's/\([^x]\)malloc/\1xmalloc/g' \
2834 -e
's/\([^x]\)realloc/\1xrealloc/g' \
2835 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2836 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
2837 -e
'/^#line.*y.tab.c/d' \
2838 -e
's/YY_NULL/YY_NULLPTR/g' \
2842 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
2843 $(FLEX
) -o
$@
$< && \
2845 sed
-e
'/extern.*malloc/d' \
2846 -e
'/extern.*realloc/d' \
2847 -e
'/extern.*free/d' \
2848 -e
'/include.*malloc.h/d' \
2849 -e
's/\([^x]\)malloc/\1xmalloc/g' \
2850 -e
's/\([^x]\)realloc/\1xrealloc/g' \
2851 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2852 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
2853 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
2857 elif
[ -f
$@
]; then \
2858 echo
"Warning: $*.c older than $*.l and flex not available."; \
2860 echo
"$@ missing and flex not available."; \
2864 .PRECIOUS
: ada-lex.c
2868 xml-builtin.c
: stamp-xml
; @true
2869 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
2870 rm -f xml-builtin.tmp
2872 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
2873 xml-builtin.tmp
$(XMLFILES
)
2874 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
2875 echo stamp
> stamp-xml
2877 .PRECIOUS
: xml-builtin.c
2880 # GDBTK sub-directory
2883 all-gdbtk
: insight
$(EXEEXT
)
2886 transformed_name
=`t='$(program_transform_name)'; \
2887 echo insight | sed -e $$t` ; \
2888 if
test "x$$transformed_name" = x
; then \
2889 transformed_name
=insight
; \
2893 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
2894 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
2895 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2896 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2897 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
2898 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2899 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
2900 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
2901 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
2902 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2903 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
2904 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
2905 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2906 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
2907 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
2908 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
2909 cd
$(srcdir)/gdbtk
/library
; \
2910 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
2912 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
2916 transformed_name
=`t='$(program_transform_name)'; \
2917 echo insight | sed -e $$t` ; \
2918 if
test "x$$transformed_name" = x
; then \
2919 transformed_name
=insight
; \
2923 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2924 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
2927 rm -f insight
$(EXEEXT
)
2929 # Removing the old gdb first works better if it is running, at least on SunOS.
2930 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
2931 $(CDEPS
) $(TDEPLIBS
)
2932 rm -f insight
$(EXEEXT
)
2933 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2934 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
2935 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2937 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
2938 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
2940 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
2941 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
2943 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
2944 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
2947 # Dependency tracking.
2950 ifeq ($(DEPMODE
),depmode
=gcc3
)
2951 # Note that we put the dependencies into a .Tpo file, then move them
2952 # into place if the compile succeeds. We need this because gcc does
2953 # not atomically write the dependency output file.
2954 override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2955 -MF
$(@D
)/$(DEPDIR
)/$(basename $(@F
)).Tpo
2956 override POSTCOMPILE
= @mv
$(@D
)/$(DEPDIR
)/$(basename $(@F
)).Tpo \
2957 $(@D
)/$(DEPDIR
)/$(basename $(@F
)).Po
2959 override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2960 DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) \
2961 $(CXX
) -x c
++ $(CXX_DIALECT
)
2962 # depcomp handles atomicity for us, so we don't need a postcompile
2964 override POSTCOMPILE
=
2967 # A list of all the objects we might care about in this build, for
2968 # dependency tracking.
2969 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2970 test-cp-name-parser.o
2972 # Ensure that generated files are created early. Use order-only
2973 # dependencies if available. They require GNU make 3.80 or newer,
2974 # and the .VARIABLES variable was introduced at the same time.
2976 $(all_object_files
): |
$(generated_files
)
2978 $(all_object_files
) : $(generated_files
)
2982 -include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2984 # Disable implicit make rules.
2985 include $(srcdir)/disable-implicit-rules.mk
2987 ### end of the gdb Makefile.in.