gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 prefix = @prefix@
  21 exec_prefix = @exec_prefix@
  22
  23 host_alias = @host_alias@
  24 target_alias = @target_alias@
  25 program_transform_name = @program_transform_name@
  26 bindir = @bindir@
  27 libdir = @libdir@
  28 tooldir = $(libdir)/$(target_alias)
  29
  30 datadir = @datadir@
  31 localedir = @localedir@
  32 mandir = @mandir@
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = @infodir@
  43 datarootdir = @datarootdir@
  44 docdir = @docdir@
  45 htmldir = @htmldir@
  46 pdfdir = @pdfdir@
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 MAKEHTML = $(MAKEINFO) --html
 115 MAKEHTMLFLAGS =
 116
 117 # Set this up with gcc if you have gnu ld and the loader will print out
 118 # line numbers for undefined references.
 119 #CC_LD=gcc -static
 120 CC_LD=$(CC)
 121
 122 # Where is our "include" directory?  Typically $(srcdir)/../include.
 123 # This is essentially the header file directory for the library
 124 # routines in libiberty.
 125 INCLUDE_DIR =  $(srcdir)/../include
 126 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 127
 128 # Where is the "-liberty" library?  Typically in ../libiberty.
 129 LIBIBERTY = ../libiberty/libiberty.a
 130
 131 # Where is the BFD library?  Typically in ../bfd.
 132 BFD_DIR = ../bfd
 133 BFD = $(BFD_DIR)/libbfd.a
 134 BFD_SRC = $(srcdir)/$(BFD_DIR)
 135 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 136
 137 # Where is the decnumber library?  Typically in ../libdecnumber.
 138 LIBDECNUMBER_DIR = ../libdecnumber
 139 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 140 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 141 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 142
 143 # Where is the READLINE library?  Typically in ../readline.
 144 READLINE_DIR = ../readline
 145 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 146 READLINE = @READLINE@
 147 READLINE_DEPS = @READLINE_DEPS@
 148 READLINE_CFLAGS = @READLINE_CFLAGS@
 149
 150 # Where is expat?  This will be empty if expat was not available.
 151 LIBEXPAT = @LIBEXPAT@
 152
 153 WARN_CFLAGS = @WARN_CFLAGS@
 154 WERROR_CFLAGS = @WERROR_CFLAGS@
 155 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 156 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 157
 158 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 159
 160 RDYNAMIC = @RDYNAMIC@
 161
 162 # Where is the INTL library?  Typically in ../intl.
 163 INTL = @LIBINTL@
 164 INTL_DEPS = @LIBINTL_DEP@
 165 INTL_CFLAGS = @INCINTL@
 166
 167 # Did the user give us a --with-sysroot option?
 168 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 169 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 170
 171 # Did the user give us a --with-gdb-datadir option?
 172 GDB_DATADIR = @GDB_DATADIR@
 173
 174 # Helper code from gnulib.
 175 LIBGNU = gnulib/libgnu.a
 176 INCGNU = -I$(srcdir)/gnulib -Ignulib
 177
 178 # Generated headers in the gnulib directory.  These must be listed
 179 # so that they are generated before other files are compiled.
 180 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 181
 182 #
 183 # CLI sub directory definitons
 184 #
 185 SUBDIR_CLI_OBS = \
 186         cli-dump.o \
 187         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
 188         cli-logging.o \
 189         cli-interp.o
 190 SUBDIR_CLI_SRCS = \
 191         cli/cli-dump.c \
 192         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 193         cli/cli-logging.c \
 194         cli/cli-interp.c
 195 SUBDIR_CLI_DEPS =
 196 SUBDIR_CLI_LDFLAGS=
 197 SUBDIR_CLI_CFLAGS=
 198
 199 #
 200 # MI sub directory definitons
 201 #
 202 SUBDIR_MI_OBS = \
 203         mi-out.o mi-console.o \
 204         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 205         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 206         mi-interp.o \
 207         mi-main.o mi-parse.o mi-getopt.o
 208 SUBDIR_MI_SRCS = \
 209         mi/mi-out.c mi/mi-console.c \
 210         mi/mi-cmds.c mi/mi-cmd-env.c \
 211         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 212         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 213         mi/mi-cmd-target.c mi/mi-interp.c \
 214         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
 215 SUBDIR_MI_DEPS =
 216 SUBDIR_MI_LDFLAGS=
 217 SUBDIR_MI_CFLAGS= \
 218         -DMI_OUT=1
 219
 220 #
 221 # TUI sub directory definitions
 222 #
 223
 224 # Name of the TUI program
 225 TUI=gdbtui
 226
 227 SUBDIR_TUI_OBS = \
 228         tui-command.o \
 229         tui-data.o \
 230         tui-disasm.o \
 231         tui-file.o tui.o \
 232         tui-hooks.o \
 233         tui-interp.o \
 234         tui-io.o \
 235         tui-layout.o \
 236         tui-out.o \
 237         tui-regs.o \
 238         tui-source.o \
 239         tui-stack.o \
 240         tui-win.o \
 241         tui-windata.o \
 242         tui-wingeneral.o \
 243         tui-winsource.o
 244 SUBDIR_TUI_SRCS = \
 245         tui/tui-command.c \
 246         tui/tui-data.c \
 247         tui/tui-disasm.c \
 248         tui/tui-file.c \
 249         tui/tui-hooks.c \
 250         tui/tui-interp.c \
 251         tui/tui-io.c \
 252         tui/tui-layout.c \
 253         tui/tui-out.c \
 254         tui/tui-regs.c \
 255         tui/tui-source.c \
 256         tui/tui-stack.c \
 257         tui/tui-win.c \
 258         tui/tui-windata.c \
 259         tui/tui-wingeneral.c \
 260         tui/tui-winsource.c \
 261         tui/tui.c
 262 SUBDIR_TUI_DEPS =
 263 SUBDIR_TUI_LDFLAGS=
 264 SUBDIR_TUI_CFLAGS= \
 265         -DTUI=1
 266
 267 #
 268 # python sub directory definitons
 269 #
 270 SUBDIR_PYTHON_OBS = \
 271         python.o \
 272         py-auto-load.o \
 273         py-block.o \
 274         py-breakpoint.o \
 275         py-cmd.o \
 276         py-frame.o \
 277         py-function.o \
 278         py-inferior.o \
 279         py-infthread.o \
 280         py-lazy-string.o \
 281         py-objfile.o \
 282         py-param.o \
 283         py-prettyprint.o \
 284         py-progspace.o \
 285         py-symbol.o \
 286         py-symtab.o \
 287         py-type.o \
 288         py-utils.o \
 289         py-value.o
 290 SUBDIR_PYTHON_SRCS = \
 291         python/python.c \
 292         python/py-auto-load.c \
 293         python/py-block.c \
 294         python/py-breakpoint.c \
 295         python/py-cmd.c \
 296         python/py-frame.c \
 297         python/py-function.c \
 298         python/py-inferior.c \
 299         python/py-infthread.c \
 300         python/py-lazy-string.c \
 301         python/py-objfile.c \
 302         python/py-param.c \
 303         python/py-prettyprint.c \
 304         python/py-progspace.c \
 305         python/py-symbol.c \
 306         python/py-symtab.c \
 307         python/py-type.c \
 308         python/py-utils.c \
 309         python/py-value.c
 310 SUBDIR_PYTHON_DEPS =
 311 SUBDIR_PYTHON_LDFLAGS=
 312 SUBDIR_PYTHON_CFLAGS=
 313
 314
 315 # Opcodes currently live in one of two places.  Either they are in the
 316 # opcode library, typically ../opcodes, or they are in a header file
 317 # in INCLUDE_DIR.
 318 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 319 # disassemblers?
 320 OPCODES_DIR = ../opcodes
 321 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 322 OPCODES = $(OPCODES_DIR)/libopcodes.a
 323 # Where are the other opcode tables which only have header file
 324 # versions?
 325 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 326 # Some source files like to use #include "opcodes/file.h"
 327 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
 328
 329 # The simulator is usually nonexistent; targets that include one
 330 # should set this to list all the .o or .a files to be linked in.
 331 SIM = @SIM@
 332
 333 WIN32LIBS = @WIN32LIBS@
 334
 335 # Tcl et al cflags and libraries
 336 TCL = @TCL_LIBRARY@
 337 TCL_CFLAGS = @TCL_INCLUDE@
 338 GDBTKLIBS = @GDBTKLIBS@
 339 # Extra flags that the GDBTK files need:
 340 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 341
 342 TK = @TK_LIBRARY@
 343 TK_CFLAGS = @TK_INCLUDE@
 344
 345 X11_CFLAGS = @TK_XINCLUDES@
 346 X11_LDFLAGS =
 347 X11_LIBS =
 348
 349 WIN32LDAPP = @WIN32LDAPP@
 350
 351 LIBGUI = @LIBGUI@
 352 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 353 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 354
 355 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 356
 357 # The version of gdbtk we're building. This should be kept
 358 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 359 GDBTK_VERSION = 1.0
 360 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 361
 362 # Gdbtk requires an absolute path to the source directory or
 363 # the testsuite won't run properly.
 364 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 365
 366 SUBDIR_GDBTK_OBS = \
 367         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 368         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 369 SUBDIR_GDBTK_SRCS = \
 370         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 371         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 372         gdbtk/generic/gdbtk-interp.c \
 373         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 374         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 375         gdbtk/generic/gdbtk-main.c
 376 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 377 SUBDIR_GDBTK_LDFLAGS=
 378 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 379
 380 CONFIG_OBS= @CONFIG_OBS@
 381 CONFIG_SRCS= @CONFIG_SRCS@
 382 CONFIG_DEPS= @CONFIG_DEPS@
 383 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 384 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 385 CONFIG_ALL= @CONFIG_ALL@
 386 CONFIG_CLEAN= @CONFIG_CLEAN@
 387 CONFIG_INSTALL = @CONFIG_INSTALL@
 388 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 389
 390 # -I. for config files.
 391 # -I$(srcdir) for gdb internal headers.
 392 # -I$(srcdir)/config for more generic config files.
 393
 394 # It is also possible that you will need to add -I/usr/include/sys if
 395 # your system doesn't have fcntl.h in /usr/include (which is where it
 396 # should be according to Posix).
 397 DEFS = @DEFS@
 398 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
 399         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 400
 401 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 402 GLOBAL_CFLAGS = $(MH_CFLAGS)
 403
 404 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 405
 406 # CFLAGS is specifically reserved for setting from the command line
 407 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 408 CFLAGS = @CFLAGS@
 409
 410 # Set by configure, for e.g. expat.
 411 INTERNAL_CPPFLAGS = @CPPFLAGS@
 412
 413 # Need to pass this to testsuite for "make check".  Probably should be
 414 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 415 # so "make check" has the same result no matter where it is run.
 416 CXXFLAGS = -g -O
 417
 418 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 419 INTERNAL_CFLAGS_BASE = \
 420         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 421         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 422         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 423         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 424 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 425 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 426
 427 # LDFLAGS is specifically reserved for setting from the command line
 428 # when running make.
 429 LDFLAGS = @LDFLAGS@
 430
 431 # Profiling options need to go here to work.
 432 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 433 # and have it work; that's why CFLAGS is here.
 434 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 435 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 436
 437 # If your system is missing alloca(), or, more likely, it's there but
 438 # it doesn't work, then refer to libiberty.
 439
 440 # Libraries and corresponding dependencies for compiling gdb.
 441 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 442 # LIBIBERTY appears twice on purpose.
 443 # If you have the Cygnus libraries installed,
 444 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 445 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 446         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 447         -lintl -liberty $(LIBGNU)
 448 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 449         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 450         $(LIBEXPAT) \
 451         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 452 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 453         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 454
 455 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 456 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 457
 458 DIST=gdb
 459
 460 LINT=/usr/5bin/lint
 461 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 462         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 463         $(INTL_CFLAGS)
 464
 465 RUNTEST = runtest
 466 RUNTESTFLAGS=
 467
 468 # XML files to build in to GDB.
 469 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 470         $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd \
 471         $(srcdir)/features/threads.dtd
 472
 473 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 474 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 475 # etc., then there will be (as part of the C library or perhaps as
 476 # part of libiberty) a POSIX interface.  But at least for now the
 477 # host-dependent makefile fragment might need to use something else
 478 # besides ser-unix.o
 479 SER_HARDWIRE = @SER_HARDWIRE@
 480
 481 # The `remote' debugging target is supported for most architectures,
 482 # but not all (e.g. 960)
 483 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 484
 485 # This is remote-sim.o if a simulator is to be linked in.
 486 SIM_OBS = @SIM_OBS@
 487
 488 # Target-dependent object files.
 489 TARGET_OBS = @TARGET_OBS@
 490
 491 # All target-dependent objects files that require 64-bit CORE_ADDR
 492 # (used with --enable-targets=all --enable-64-bit-bfd).
 493 ALL_64_TARGET_OBS = \
 494         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 495         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 496         amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
 497         amd64-linux-tdep.o amd64nbsd-tdep.o \
 498         amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
 499         ia64-linux-tdep.o ia64-tdep.o \
 500         mips64obsd-tdep.o \
 501         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 502         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 503
 504 # All other target-dependent objects files (used with --enable-targets=all).
 505 ALL_TARGET_OBS = \
 506         armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
 507         armnbsd-tdep.o armobsd-tdep.o \
 508         arm-tdep.o arm-wince-tdep.o \
 509         avr-tdep.o \
 510         cris-tdep.o \
 511         dicos-tdep.o \
 512         frv-linux-tdep.o frv-tdep.o \
 513         h8300-tdep.o \
 514         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 515         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 516         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 517         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 518         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 519         i386-dicos-tdep.o i386-darwin-tdep.o \
 520         iq2000-tdep.o \
 521         linux-tdep.o \
 522         lm32-tdep.o \
 523         m32c-tdep.o \
 524         m32r-linux-tdep.o m32r-tdep.o \
 525         m68hc11-tdep.o \
 526         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 527         m88k-tdep.o \
 528         mep-tdep.o \
 529         microblaze-tdep.o microblaze-linux-tdep.o \
 530         mips-irix-tdep.o mips-linux-tdep.o \
 531         mipsnbsd-tdep.o mips-tdep.o \
 532         mn10300-linux-tdep.o mn10300-tdep.o \
 533         moxie-tdep.o \
 534         mt-tdep.o \
 535         nto-tdep.o \
 536         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 537         rs6000-aix-tdep.o rs6000-tdep.o \
 538         s390-tdep.o \
 539         score-tdep.o \
 540         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 541         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 542         sparc-sol2-tdep.o sparc-tdep.o \
 543         spu-tdep.o spu-multiarch.o solib-spu.o \
 544         v850-tdep.o \
 545         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 546         xstormy16-tdep.o \
 547         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 548         glibc-tdep.o \
 549         bsd-uthread.o \
 550         nbsd-tdep.o obsd-tdep.o \
 551         sol2-tdep.o \
 552         solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 553         solib-som.o solib-pa64.o solib-darwin.o \
 554         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 555         remote-m32r-sdi.o \
 556         xcoffread.o \
 557         symfile-mem.o \
 558         corelow.o \
 559         windows-tdep.o \
 560         linux-record.o
 561
 562 # Host-dependent makefile fragment comes in here.
 563 @host_makefile_frag@
 564 # End of host-dependent makefile fragment
 565
 566 FLAGS_TO_PASS = \
 567         "prefix=$(prefix)" \
 568         "exec_prefix=$(exec_prefix)" \
 569         "infodir=$(infodir)" \
 570         "datarootdir=$(datarootdir)" \
 571         "docdir=$(docdir)" \
 572         "htmldir=$(htmldir)" \
 573         "pdfdir=$(pdfdir)" \
 574         "libdir=$(libdir)" \
 575         "mandir=$(mandir)" \
 576         "datadir=$(datadir)" \
 577         "includedir=$(includedir)" \
 578         "against=$(against)" \
 579         "DESTDIR=$(DESTDIR)" \
 580         "AR=$(AR)" \
 581         "AR_FLAGS=$(AR_FLAGS)" \
 582         "CC=$(CC)" \
 583         "CFLAGS=$(CFLAGS)" \
 584         "CXX=$(CXX)" \
 585         "CXXFLAGS=$(CXXFLAGS)" \
 586         "DLLTOOL=$(DLLTOOL)" \
 587         "LDFLAGS=$(LDFLAGS)" \
 588         "RANLIB=$(RANLIB)" \
 589         "MAKEINFO=$(MAKEINFO)" \
 590         "MAKEHTML=$(MAKEHTML)" \
 591         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 592         "INSTALL=$(INSTALL)" \
 593         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 594         "INSTALL_DATA=$(INSTALL_DATA)" \
 595         "RUNTEST=$(RUNTEST)" \
 596         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 597
 598 # Flags that we pass when building the testsuite.
 599
 600 # empty for native, $(target_alias)/ for cross
 601 target_subdir = @target_subdir@
 602
 603 CC_FOR_TARGET = ` \
 604   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 605     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 606       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 607     else \
 608       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 609     fi; \
 610   else \
 611     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 612       echo $(CC); \
 613     else \
 614       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 615     fi; \
 616   fi`
 617
 618 CXX = gcc
 619 CXX_FOR_TARGET = ` \
 620   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 621     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 622       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 623     else \
 624       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 625     fi; \
 626   else \
 627     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 628       echo $(CXX); \
 629     else \
 630       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 631     fi; \
 632   fi`
 633
 634 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 635 # duplicating the lengthy definition.
 636 TARGET_FLAGS_TO_PASS = \
 637         "prefix=$(prefix)" \
 638         "exec_prefix=$(exec_prefix)" \
 639         "against=$(against)" \
 640         'CC=$$(CC_FOR_TARGET)' \
 641         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 642         "CFLAGS=$(CFLAGS)" \
 643         'CXX=$$(CXX_FOR_TARGET)' \
 644         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 645         "CXXFLAGS=$(CXXFLAGS)" \
 646         "INSTALL=$(INSTALL)" \
 647         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 648         "INSTALL_DATA=$(INSTALL_DATA)" \
 649         "MAKEINFO=$(MAKEINFO)" \
 650         "MAKEHTML=$(MAKEHTML)" \
 651         "RUNTEST=$(RUNTEST)" \
 652         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 653         "FORCE_PARALLEL=$(FORCE_PARALLEL)"
 654
 655 # All source files that go into linking GDB.
 656 # Links made at configuration time should not be specified here, since
 657 # SFILES is used in building the distribution archive.
 658
 659 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 660         addrmap.c \
 661         auxv.c ax-general.c ax-gdb.c \
 662         bcache.c \
 663         bfd-target.c \
 664         block.c blockframe.c breakpoint.c buildsym.c \
 665         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 666         charset.c cli-out.c coffread.c coff-pe-read.c \
 667         complaints.c completer.c corefile.c \
 668         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 669         d-lang.c d-valprint.c \
 670         cp-name-parser.y \
 671         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 672         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 673         elfread.c environ.c eval.c event-loop.c event-top.c \
 674         exceptions.c expprint.c \
 675         f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
 676         findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
 677         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 678         inf-loop.c \
 679         infcall.c \
 680         infcmd.c inflow.c infrun.c \
 681         inline-frame.c \
 682         interps.c \
 683         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 684         language.c linespec.c \
 685         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 686         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 687         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 688         mi/mi-common.c \
 689         objc-exp.y objc-lang.c \
 690         objfiles.c osabi.c observer.c osdata.c \
 691         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 692         proc-service.list progspace.c \
 693         prologue-value.c psymtab.c \
 694         regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 695         scm-exp.c scm-lang.c scm-valprint.c \
 696         sentinel-frame.c \
 697         serial.c ser-base.c ser-unix.c \
 698         solib.c solib-target.c source.c \
 699         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 700         symtab.c \
 701         target.c target-descriptions.c target-memory.c \
 702         thread.c top.c tracepoint.c \
 703         trad-frame.c \
 704         tramp-frame.c \
 705         typeprint.c \
 706         ui-out.c utils.c ui-file.h ui-file.c \
 707         user-regs.c \
 708         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 709         wrapper.c \
 710         xml-tdesc.c xml-support.c \
 711         inferior.c gdb_usleep.c \
 712         record.c gcore.c \
 713         jit.c \
 714         xml-syscall.c \
 715
 716 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 717
 718 # Header files that need to have srcdir added.  Note that in the cases
 719 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 720 # so that each .h file is listed exactly once (M-x tags-search works
 721 # wrong if TAGS has files twice).  Because this is tricky to get
 722 # right, it is probably easiest just to list .h files here directly.
 723
 724 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 725 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 726 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 727 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 728 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 729 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 730 osf-share/cma_stack_int.h osf-share/cma_init.h \
 731 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 732 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 733 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
 734 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
 735 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 736 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 737 c-lang.h d-lang.h frame.h event-loop.h block.h cli/cli-setshow.h        \
 738 cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
 739 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 740 gnulib/string.in.h gnulib/str-two-way.h \
 741 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 742 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 743 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 744 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 745 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 746 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 747 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 748 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 749 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 750 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 751 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
 752 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 753 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 754 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 755 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 756 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 757 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 758 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 759 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 760 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 761 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 762 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 763 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 764 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 765 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 766 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 767 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 768 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 769 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 770 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 771 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 772 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 773 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
 774 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 775 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 776 regformats/regdef.h config/alpha/nm-osf3.h  config/i386/nm-i386gnu.h \
 777 config/i386/nm-fbsd.h \
 778 config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
 779 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 780 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 781 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 782 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
 783 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \
 784 psymtab.h psympriv.h
 785
 786 # Header files that already have srcdir in them, or which are in objdir.
 787
 788 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 789
 790
 791 # GDB "info" files, which should be included in their entirety
 792 INFOFILES = gdb.info*
 793
 794 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 795
 796 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 797 # default their values the way we do for SER_HARDWIRE; in the future
 798 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 799 # variables analogous to SER_HARDWIRE which get defaulted in this
 800 # Makefile.in
 801
 802 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 803            $(REMOTE_OBS) $(SIM_OBS)
 804
 805 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 806 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 807 # and it's more useful to see it in the .y file.
 808 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 809         $(CONFIG_SRCS)
 810 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 811
 812 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 813         version.o \
 814         annotate.o \
 815         addrmap.o \
 816         auxv.o \
 817         bfd-target.o \
 818         blockframe.o breakpoint.o findvar.o regcache.o \
 819         charset.o disasm.o dummy-frame.o dfp.o \
 820         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 821         block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
 822         infcall.o \
 823         infcmd.o infrun.o \
 824         expprint.o environ.o stack.o thread.o \
 825         exceptions.o \
 826         filesystem.o \
 827         inf-child.o \
 828         interps.o \
 829         main.o \
 830         macrotab.o macrocmd.o macroexp.o macroscope.o \
 831         mi-common.o \
 832         event-loop.o event-top.o inf-loop.o completer.o \
 833         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 834         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 835         findcmd.o \
 836         std-regs.o \
 837         signals.o \
 838         exec.o reverse.o \
 839         bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 840         dbxread.o coffread.o coff-pe-read.o \
 841         dwarf2read.o mipsread.o stabsread.o corefile.o \
 842         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 843         ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
 844         ada-tasks.o \
 845         ui-out.o cli-out.o \
 846         varobj.o vec.o wrapper.o \
 847         jv-lang.o jv-valprint.o jv-typeprint.o \
 848         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 849         scm-exp.o scm-lang.o scm-valprint.o \
 850         sentinel-frame.o \
 851         complaints.o typeprint.o \
 852         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 853         ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
 854         m2-valprint.o \
 855         serial.o mdebugread.o top.o utils.o \
 856         ui-file.o \
 857         user-regs.o \
 858         frame.o frame-unwind.o doublest.o \
 859         frame-base.o \
 860         inline-frame.o \
 861         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 862         cp-namespace.o \
 863         reggroups.o regset.o \
 864         trad-frame.o \
 865         tramp-frame.o \
 866         solib.o solib-target.o \
 867         prologue-value.o memory-map.o xml-support.o xml-syscall.o \
 868         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 869         inferior.o osdata.o gdb_usleep.o record.o gcore.o \
 870         jit.o progspace.o
 871
 872 # Definitions for the syscall's XML files and dir
 873 XML_SYSCALLS_DIR = syscalls/
 874 XML_SYSCALLS_FILES = gdb-syscalls.dtd \
 875                      ppc-linux.xml ppc64-linux.xml \
 876                      i386-linux.xml amd64-linux.xml \
 877                      sparc-linux.xml sparc64-linux.xml
 878
 879 TSOBS = inflow.o
 880
 881 SUBDIRS = @subdirs@
 882 CLEANDIRS = $(SUBDIRS) gnulib
 883
 884 # For now, shortcut the "configure GDB for fewer languages" stuff.
 885 YYFILES = c-exp.c \
 886         cp-name-parser.c \
 887         objc-exp.c \
 888         ada-lex.c \
 889         ada-exp.c \
 890         jv-exp.c \
 891         f-exp.c m2-exp.c p-exp.c
 892 YYOBJ = c-exp.o \
 893         cp-name-parser.o \
 894         objc-exp.o \
 895         ada-exp.o \
 896         jv-exp.o \
 897         f-exp.o m2-exp.o p-exp.o
 898
 899 # Things which need to be built when making a distribution.
 900
 901 DISTSTUFF = $(YYFILES)
 902
 903
 904 # All generated files which can be included by another file.
 905 generated_files = config.h observer.h observer.inc ada-lex.c \
 906         $(GNULIB_H) $(NAT_GENERATED_FILES)
 907
 908 .c.o:
 909         $(COMPILE) $<
 910         $(POSTCOMPILE)
 911
 912 all: gdb$(EXEEXT) $(CONFIG_ALL) xml-syscall-copy
 913         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 914 .PHONY: all-tui
 915 all-tui: $(TUI)$(EXEEXT)
 916
 917 # This is needed for running GDB from the build directory
 918 .PHONY: xml-syscall-copy
 919 xml-syscall-copy:
 920         if [ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
 921           mkdir -p ./$(XML_SYSCALLS_DIR) ; \
 922           list='$(XML_SYSCALLS_FILES)' ; \
 923           for file in $$list ; do \
 924             f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 925             if test -f $$f ; then \
 926               $(INSTALL_DATA) $$f \
 927                   ./$(XML_SYSCALLS_DIR) ; \
 928             fi ; \
 929           done ; \
 930         fi ;
 931
 932 # This target is responsible for properly installing the syscalls'
 933 # XML files in the system.
 934 .PHONY: xml-syscall-install
 935 xml-syscall-install:
 936         $(SHELL) $(srcdir)/../mkinstalldirs \
 937                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 938         list='$(XML_SYSCALLS_FILES)' ; \
 939         for file in $$list ; do \
 940           f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 941           if test -f $$f ; then \
 942             $(INSTALL_DATA) $$f \
 943                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 944           fi ; \
 945         done ;
 946
 947 installcheck:
 948
 949 # The check target can not use subdir_do, because subdir_do does not
 950 # use TARGET_FLAGS_TO_PASS.
 951 check: force
 952         @if [ -f testsuite/Makefile ]; then \
 953           rootme=`pwd`; export rootme; \
 954           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 955           cd testsuite; \
 956           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 957         else true; fi
 958
 959 # The idea is to parallelize testing of multilibs, for example:
 960 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 961 # will run 3 concurrent sessions of check, eventually testing all 10
 962 # combinations.  GNU make is required for the % pattern to work, as is
 963 # a shell that expands alternations within braces.  If GNU make is not
 964 # used, this rule will harmlessly fail to match.  Used FORCE_PARALLEL to
 965 # prevent serialized checking due to the passed RUNTESTFLAGS.
 966 # FIXME: use config.status --config not --version, when available.
 967 check//%: force
 968         @if [ -f testsuite/config.status ]; then \
 969           rootme=`pwd`; export rootme; \
 970           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 971           target=`echo "$@" | sed 's,//.*,,'`; \
 972           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 973           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 974           testdir=testsuite.$$vardots; \
 975           if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
 976             configargs=`cd testsuite && ./config.status --version | \
 977               sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
 978             $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
 979             (cd $$testdir && \
 980              eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
 981                            "\"--srcdir=\$$rootsrc/testsuite\"" \
 982              ); \
 983           else :; fi && cd $$testdir && \
 984           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 985             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 986             FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
 987             "$$target"; \
 988         else true; fi
 989
 990 info install-info clean-info dvi pdf install-pdf html install-html: force
 991         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 992
 993 gdb.z:gdb.1
 994         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 995         pack gdb.t ; rm -f gdb.t
 996         mv gdb.t.z gdb.z
 997
 998 # Traditionally "install" depends on "all".  But it may be useful
 999 # not to; for example, if the user has made some trivial change to a
1000 # source file and doesn't care about rebuilding or just wants to save the
1001 # time it takes for make to check that all is up to date.
1002 # install-only is intended to address that need.
1003 install: all install-only
1004
1005 # The "install-only" target also installs the syscalls' XML files in
1006 # the system.
1007 install-only: $(CONFIG_INSTALL) xml-syscall-install
1008         transformed_name=`t='$(program_transform_name)'; \
1009                           echo gdb | sed -e "$$t"` ; \
1010                 if test "x$$transformed_name" = x; then \
1011                   transformed_name=gdb ; \
1012                 else \
1013                   true ; \
1014                 fi ; \
1015                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1016                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1017                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1018                 $(SHELL) $(srcdir)/../mkinstalldirs \
1019                         $(DESTDIR)$(man1dir) ; \
1020                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1021                         $(DESTDIR)$(man1dir)/$$transformed_name.1; \
1022         transformed_name=`t='$(program_transform_name)'; \
1023                           echo gdb-add-index | sed -e "$$t"` ; \
1024                 if test "x$$transformed_name" = x; then \
1025                   transformed_name=gdb-add-index ; \
1026                 else \
1027                   true ; \
1028                 fi ; \
1029                 $(INSTALL_PROGRAM) $(srcdir)/gdb-add-index.sh \
1030                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT)
1031         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1032 .PHONY: install-tui
1033 install-tui:
1034         transformed_name=`t='$(program_transform_name)'; \
1035                           echo $(TUI) | sed -e "$$t"` ; \
1036                 if test "x$$transformed_name" = x; then \
1037                   transformed_name=$(TUI) ; \
1038                 else \
1039                   true ; \
1040                 fi ; \
1041                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1042                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
1043                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1044                 $(SHELL) $(srcdir)/../mkinstalldirs \
1045                         $(DESTDIR)$(man1dir) ; \
1046                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1047                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1048
1049
1050 uninstall: force $(CONFIG_UNINSTALL)
1051         transformed_name=`t='$(program_transform_name)'; \
1052                           echo gdb | sed -e $$t` ; \
1053                 if test "x$$transformed_name" = x; then \
1054                   transformed_name=gdb ; \
1055                 else \
1056                   true ; \
1057                 fi ; \
1058                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1059                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1060         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1061 .PHONY: uninstall-tui
1062 uninstall-tui:
1063         transformed_name=`t='$(program_transform_name)'; \
1064                           echo $(TUI) | sed -e $$t` ; \
1065                 if test "x$$transformed_name" = x; then \
1066                   transformed_name=$(TUI) ; \
1067                 else \
1068                   true ; \
1069                 fi ; \
1070                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1071                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1072
1073 # The C++ name parser can be built standalone for testing.
1074 test-cp-name-parser.o: cp-name-parser.c
1075         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1076         $(POSTCOMPILE)
1077
1078 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1079         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
1080                 test-cp-name-parser.o $(LIBIBERTY)
1081
1082 # We do this by grepping through sources.  If that turns out to be too slow,
1083 # maybe we could just require every .o file to have an initialization routine
1084 # of a given name (top.o -> _initialize_top, etc.).
1085 #
1086 # Formatting conventions:  The name of the _initialize_* routines must start
1087 # in column zero, and must not be inside #if.
1088 #
1089 # Note that the set of files with init functions might change, or the names
1090 # of the functions might change, so this files needs to depend on all the
1091 # object files that will be linked into gdb.
1092
1093 # FIXME: There is a problem with this approach - init.c may force
1094 # unnecessary files to be linked in.
1095
1096 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1097 # the first call is to _initialize_gdbtypes (implemented by explicitly
1098 # putting that function's name first in the init.l-tmp file).  This is
1099 # a hack to ensure that all the architecture dependant global
1100 # builtin_type_* variables are initialized before anything else
1101 # (per-architecture code is called in the same order that it is
1102 # registered).  The ``correct fix'' is to have all the builtin types
1103 # made part of the architecture and initialize them on-demand (using
1104 # gdbarch_data) just like everything else.  The catch is that other
1105 # modules still take the address of these builtin types forcing them
1106 # to be variables, sigh!
1107
1108 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1109 # anchored on the first column and excludes the ``/'' character so
1110 # that it doesn't add the $(srcdir) prefix to any file that already
1111 # has an absolute path.  It turns out that $(DEC)'s True64 make
1112 # automatically adds the $(srcdir) prefixes when it encounters files
1113 # in sub-directories such as cli/ and mi/.
1114
1115 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1116 # duplicates.  Files in the gdb/ directory can end up appearing in
1117 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1118
1119 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1120 init.c: $(INIT_FILES)
1121         @echo Making init.c
1122         @rm -f init.c-tmp init.l-tmp
1123         @touch init.c-tmp
1124         @echo gdbtypes > init.l-tmp
1125         @-LANG=C ; export LANG ; \
1126         LC_ALL=C ; export LC_ALL ; \
1127         echo $(INIT_FILES) | \
1128         tr ' ' '\012' | \
1129         sed \
1130             -e '/^gdbtypes.[co]$$/d' \
1131             -e '/^init.[co]$$/d' \
1132             -e '/xdr_ld.[co]$$/d' \
1133             -e '/xdr_ptrace.[co]$$/d' \
1134             -e '/xdr_rdb.[co]$$/d' \
1135             -e '/udr.[co]$$/d' \
1136             -e '/udip2soc.[co]$$/d' \
1137             -e '/udi2go32.[co]$$/d' \
1138             -e '/version.[co]$$/d' \
1139             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1140             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1141             -e 's/\.[co]$$/.c/' \
1142             -e 's,signals\.c,common/signals\.c,' \
1143             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1144         while read f; do \
1145             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1146         done | \
1147         while read f; do \
1148             case " $$fs " in \
1149                 *" $$f "* ) ;; \
1150                 * ) echo $$f ; fs="$$fs $$f";; \
1151             esac; \
1152         done >> init.l-tmp
1153         @echo '/* Do not modify this file.  */' >>init.c-tmp
1154         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1155         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1156         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1157         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1158         @echo 'void' >>init.c-tmp
1159         @echo 'initialize_all_files (void)' >>init.c-tmp
1160         @echo '{' >>init.c-tmp
1161         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1162         @echo '}' >>init.c-tmp
1163         @rm init.l-tmp
1164         @mv init.c-tmp init.c
1165
1166 .PRECIOUS: init.c
1167
1168 # Removing the old gdb first works better if it is running, at least on SunOS.
1169 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1170         rm -f gdb$(EXEEXT)
1171         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1172                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1173                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1174
1175 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1176         rm -f $(TUI)$(EXEEXT)
1177         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1178                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1179                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1180
1181 # Convenience rule to handle recursion.
1182 $(LIBGNU) $(GNULIB_H): all-lib
1183 all-lib: gnulib/Makefile
1184         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1185 .PHONY: all-lib
1186
1187 # Create a library of the gdb object files and build GDB by linking
1188 # against that.
1189 #
1190 # init.o is very important.  It pulls in the rest of GDB.
1191 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1192 libgdb.a: $(LIBGDB_OBS)
1193         -rm -f libgdb.a
1194         $(AR) q libgdb.a $(LIBGDB_OBS)
1195         $(RANLIB) libgdb.a
1196
1197 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1198 # on itself without copying the executable.  So "make gdb1" will make
1199 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1200 # Removing gdb1 before the copy is the right thing if gdb1 is open
1201 # in another process.
1202 gdb1$(EXEEXT): gdb$(EXEEXT)
1203         rm -f gdb1$(EXEEXT)
1204         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1205
1206 # Put the proper machine-specific files first, so M-. on a machine
1207 # specific routine gets the one for the correct machine.  (FIXME: those
1208 # files go in twice; we should be removing them from the main list).
1209
1210 # TAGS depends on all the files that go into it so you can rebuild TAGS
1211 # with `make TAGS' and not have to say `rm TAGS' first.
1212
1213 GDB_NM_FILE = @GDB_NM_FILE@
1214 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1215         @echo Making TAGS
1216         @etags $(srcdir)/$(GDB_NM_FILE) \
1217         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1218                 echo $(srcdir)/$$i ; \
1219         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1220                 echo $$i ; \
1221         done) | sed -e 's/\.o$$/\.c/'` \
1222         `find $(srcdir)/config -name '*.h' -print`
1223
1224 tags: TAGS
1225
1226 clean mostlyclean: $(CONFIG_CLEAN)
1227         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1228         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1229         rm -f init.c version.c
1230         rm -f gdb$(EXEEXT) core make.log
1231         rm -f gdb[0-9]$(EXEEXT)
1232         rm -f test-cp-name-parser$(EXEEXT)
1233         rm -f xml-builtin.c stamp-xml
1234         rm -f $(DEPDIR)/*
1235
1236 .PHONY: clean-tui
1237 clean-tui:
1238         rm -f $(TUI)$(EXEEXT)
1239
1240 # This used to depend on c-exp.c m2-exp.c TAGS
1241 # I believe this is wrong; the makefile standards for distclean just
1242 # describe removing files; the only sort of "re-create a distribution"
1243 # functionality described is if the distributed files are unmodified.
1244 # NB: While GDBSERVER might be configured on native systems, it isn't
1245 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1246 distclean: clean
1247         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1248         rm -f gdbserver/config.status gdbserver/config.log
1249         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1250         rm -f gdbserver/Makefile gdbserver/config.cache
1251         rm -f nm.h config.status config.h stamp-h .gdbinit
1252         rm -f y.output yacc.acts yacc.tmp y.tab.h
1253         rm -f config.log config.cache
1254         rm -f Makefile
1255         rm -rf $(DEPDIR)
1256
1257 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1258 realclean: maintainer-clean
1259
1260 local-maintainer-clean:
1261         @echo "This command is intended for maintainers to use;"
1262         @echo "it deletes files that may require special tools to rebuild."
1263         rm -f c-exp.c \
1264                 cp-name-parser.c \
1265                 ada-lex.c ada-exp.c \
1266                 objc-exp.c \
1267                 jv-exp.tab \
1268                 f-exp.c m2-exp.c p-exp.c
1269         rm -f TAGS $(INFOFILES)
1270         rm -f $(YYFILES)
1271         rm -f nm.h config.status
1272
1273 do-maintainer-clean:
1274         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1275                 subdir_do
1276
1277 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1278         cd doc; $(MAKE) $(MFLAGS) diststuff
1279
1280 subdir_do: force
1281         @for i in $(DODIRS); do \
1282                 if [ -f ./$$i/Makefile ] ; then \
1283                         if (cd ./$$i; \
1284                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1285                         else exit 1 ; fi ; \
1286                 else true ; fi ; \
1287         done
1288
1289 Makefile: Makefile.in config.status @frags@
1290         # Regenerate the Makefile and the tm.h / nm.h links.
1291         CONFIG_FILES="Makefile" \
1292           CONFIG_COMMANDS= \
1293           CONFIG_HEADERS= \
1294           $(SHELL) config.status
1295
1296 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1297         CONFIG_FILES="gnulib/Makefile" \
1298           CONFIG_COMMANDS="depfiles" \
1299           CONFIG_HEADERS= \
1300           CONFIG_LINKS= \
1301           $(SHELL) config.status
1302
1303 config.h: stamp-h ; @true
1304 stamp-h: $(srcdir)/config.in config.status
1305         CONFIG_HEADERS=config.h:config.in \
1306           CONFIG_COMMANDS="default depdir" \
1307           CONFIG_FILES= \
1308           CONFIG_LINKS= \
1309           $(SHELL) config.status
1310
1311 config.status: $(srcdir)/configure configure.tgt configure.host
1312         $(SHELL) config.status --recheck
1313
1314 ACLOCAL = aclocal
1315 ACLOCAL_AMFLAGS = -I gnulib/m4
1316 aclocal_m4_deps = \
1317         configure.ac \
1318         gnulib/m4/extensions.m4 \
1319         gnulib/m4/gnulib-common.m4 \
1320         gnulib/m4/gnulib-comp.m4 \
1321         gnulib/m4/include_next.m4 \
1322         gnulib/m4/longlong.m4 \
1323         gnulib/m4/memchr.m4 \
1324         gnulib/m4/memcmp.m4 \
1325         gnulib/m4/memmem.m4 \
1326         gnulib/m4/onceonly_2_57.m4 \
1327         gnulib/m4/stdint.m4 \
1328         gnulib/m4/string_h.m4 \
1329         gnulib/m4/wchar.m4 \
1330         ../config/extensions.m4 \
1331         ../config/lead-dot.m4 \
1332         ../config/proginstall.m4 \
1333         ../bfd/bfd.m4 \
1334         ../config/acinclude.m4 \
1335         ../config/override.m4 \
1336         ../config/gettext-sister.m4 \
1337         ../config/lib-ld.m4 \
1338         ../config/lib-prefix.m4 \
1339         ../config/lib-link.m4 \
1340         ../config/acx.m4 \
1341         ../config/tcl.m4 \
1342         ../config/depstand.m4 \
1343         ../config/lcmessage.m4 \
1344         ../config/codeset.m4
1345
1346 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
1347         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
1348
1349 AUTOCONF = autoconf
1350 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
1351 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1352         cd $(srcdir) && $(AUTOCONF)
1353
1354 AUTOHEADER = autoheader
1355 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1356         cd $(srcdir) && $(AUTOHEADER)
1357         rm -f stamp-h
1358         touch $@
1359
1360 # automatic rebuilding in automake-generated Makefiles requires
1361 # this rule in the toplevel Makefile, which, with GNU make, causes
1362 # the desired updates through the implicit regeneration of the Makefile
1363 # and all of its prerequisites.
1364 am--refresh:
1365         @:
1366
1367 force:
1368
1369 # Documentation!
1370 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1371 doc/refcard.dvi:
1372         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1373
1374 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1375 doc/refcard.ps:
1376         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1377
1378 # GDB MANUAL: TeX dvi file
1379 doc/gdb.dvi:
1380         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1381
1382 # GDB MANUAL: info file
1383 doc/gdb.info:
1384         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1385
1386 # Make copying.c from COPYING
1387 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1388         awk -f $(srcdir)/copying.awk \
1389                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1390         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1391
1392 version.c: Makefile version.in
1393         rm -f version.c-tmp version.c
1394         echo '#include "version.h"' >> version.c-tmp
1395         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1396         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1397         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1398         mv version.c-tmp version.c
1399
1400 observer.h: observer.sh doc/observer.texi
1401         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1402
1403 observer.inc: observer.sh doc/observer.texi
1404         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1405
1406 lint: $(LINTFILES)
1407         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1408            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1409
1410 gdb.cxref: $(SFILES)
1411         cxref -I. $(SFILES) >gdb.cxref
1412
1413 force_update:
1414
1415 # GNU Make has an annoying habit of putting *all* the Makefile variables
1416 # into the environment, unless you include this target as a circumvention.
1417 # Rumor is that this will be fixed (and this target can be removed)
1418 # in GNU Make 4.0.
1419 .NOEXPORT:
1420
1421 # GNU Make 3.63 has a different problem: it keeps tacking command line
1422 # overrides onto the definition of $(MAKE).  This variable setting
1423 # will remove them.
1424 MAKEOVERRIDES=
1425
1426 ALLDEPFILES = \
1427         aix-thread.c \
1428         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1429         alpha-tdep.c alpha-mdebug-tdep.c \
1430         alpha-linux-tdep.c alpha-osf1-tdep.c \
1431         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1432         amd64-nat.c amd64-tdep.c \
1433         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1434         amd64nbsd-nat.c amd64nbsd-tdep.c \
1435         amd64obsd-nat.c amd64obsd-tdep.c \
1436         amd64-darwin-tdep.c \
1437         amd64-dicos-tdep.c \
1438         amd64-linux-nat.c amd64-linux-tdep.c \
1439         amd64-sol2-tdep.c \
1440         arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1441         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1442         avr-tdep.c \
1443         bsd-uthread.c bsd-kvm.c \
1444         core-regset.c corelow.c \
1445         dcache.c dicos-tdep.c darwin-nat.c \
1446         exec.c \
1447         fbsd-nat.c \
1448         fork-child.c \
1449         glibc-tdep.c \
1450         go32-nat.c h8300-tdep.c \
1451         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1452         hppa-linux-tdep.c hppa-linux-nat.c \
1453         hppabsd-nat.c hppabsd-tdep.c \
1454         hppaobsd-tdep.c \
1455         hppanbsd-nat.c hppanbsd-tdep.c \
1456         i386-tdep.c i386-linux-nat.c \
1457         i386v4-nat.c i386-cygwin-tdep.c \
1458         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1459         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1460         i387-tdep.c \
1461         i386-darwin-tdep.c i386-darwin-nat.c \
1462         i386-dicos-tdep.c \
1463         i386-linux-tdep.c i386-nat.c \
1464         i386-sol2-nat.c i386-sol2-tdep.c \
1465         i386gnu-nat.c i386gnu-tdep.c \
1466         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1467         inf-ptrace.c inf-ttrace.c \
1468         irix5-nat.c \
1469         libunwind-frame.c \
1470         linux-fork.c \
1471         linux-tdep.c \
1472         linux-record.c \
1473         lm32-tdep.c \
1474         m68hc11-tdep.c \
1475         m32r-tdep.c \
1476         m32r-linux-nat.c m32r-linux-tdep.c \
1477         m68k-tdep.c \
1478         m68kbsd-nat.c m68kbsd-tdep.c \
1479         m68klinux-nat.c m68klinux-tdep.c \
1480         m88k-tdep.c m88kbsd-nat.c \
1481         microblaze-tdep.c microblaze-linux-tdep.c \
1482         mingw-hdep.c \
1483         mips-linux-nat.c mips-linux-tdep.c \
1484         mips-irix-tdep.c \
1485         mips-tdep.c \
1486         mipsnbsd-nat.c mipsnbsd-tdep.c \
1487         mips64obsd-nat.c mips64obsd-tdep.c \
1488         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1489         solib-osf.c \
1490         somread.c solib-som.c \
1491         posix-hdep.c \
1492         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1493         ppcnbsd-nat.c ppcnbsd-tdep.c \
1494         ppcobsd-nat.c ppcobsd-tdep.c \
1495         procfs.c \
1496         remote-m32r-sdi.c remote-mips.c \
1497         remote-sim.c \
1498         dcache.c \
1499         rs6000-nat.c rs6000-tdep.c \
1500         s390-tdep.c s390-nat.c \
1501         score-tdep.c \
1502         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1503         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1504         sol2-tdep.c \
1505         solib-irix.c solib-svr4.c solib-sunos.c \
1506         sparc-linux-nat.c sparc-linux-tdep.c \
1507         sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1508         sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1509         sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1510         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1511         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1512         spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1513         v850-tdep.c \
1514         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1515         windows-nat.c windows-tdep.c \
1516         xcoffread.c xcoffsolib.c \
1517         xstormy16-tdep.c \
1518         xtensa-tdep.c xtensa-config.c \
1519         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1520
1521 # Some files need explicit build rules (due to -Werror problems) or due
1522 # to sub-directory fun 'n' games.
1523
1524 hpux-thread.o: $(srcdir)/hpux-thread.c
1525         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1526                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1527         $(POSTCOMPILE)
1528
1529 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1530 main.o: $(srcdir)/main.c
1531         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1532         $(POSTCOMPILE)
1533
1534 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1535 # errors.  It turns out that that is the least of monitor.c's
1536 # problems.  The function print_vsprintf appears to be using
1537 # va_arg(long) to extract CORE_ADDR parameters - something that
1538 # definitly will not work.  "monitor.c" needs to be rewritten so that
1539 # it doesn't use format strings and instead uses callbacks.
1540 monitor.o: $(srcdir)/monitor.c
1541         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1542         $(POSTCOMPILE)
1543
1544 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1545 # checks format strings.
1546 printcmd.o: $(srcdir)/printcmd.c
1547         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1548                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1549         $(POSTCOMPILE)
1550
1551 # Message files.  Based on code in gcc/Makefile.in.
1552
1553 # Rules for generating translated message descriptions.  Disabled by
1554 # autoconf if the tools are not available.
1555
1556 .SUFFIXES: .po .gmo .pox .pot
1557 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1558
1559 all-po: $(CATALOGS)
1560
1561 # This notation should be acceptable to all Make implementations used
1562 # by people who are interested in updating .po files.
1563 update-po: $(CATALOGS:.gmo=.pox)
1564
1565 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1566 # script does that.
1567 .po.gmo:
1568         -test -d po || mkdir po
1569         $(GMSGFMT) --statistics -o $@ $<
1570
1571 # The new .po has to be gone over by hand, so we deposit it into
1572 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1573 # exists, use it (it was just created), else use the one in srcdir.
1574 .po.pox:
1575         -test -d po || mkdir po
1576         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1577                         then echo po/$(PACKAGE).pot; \
1578                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1579
1580 # This rule has to look for .gmo modules in both srcdir and the cwd,
1581 # and has to check that we actually have a catalog for each language,
1582 # in case they weren't built or included with the distribution.
1583 install-po:
1584         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1585         cats="$(CATALOGS)"; for cat in $$cats; do \
1586           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1587           if [ -f $$cat ]; then :; \
1588           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1589           else continue; \
1590           fi; \
1591           dir=$(localedir)/$$lang/LC_MESSAGES; \
1592           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1593           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1594           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1595           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1596         done
1597 uninstall-po:
1598         cats="$(CATALOGS)"; for cat in $$cats; do \
1599           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1600           if [ -f $$cat ]; then :; \
1601           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1602           else continue; \
1603           fi; \
1604           dir=$(localedir)/$$lang/LC_MESSAGES; \
1605           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1606         done
1607 # Delete po/*.gmo only if we are not building in the source directory.
1608 clean-po:
1609         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1610
1611 # Rule for regenerating the message template (gdb.pot).  Instead of
1612 # forcing everyone to edit POTFILES.in, which proved impractical, this
1613 # rule has no dependencies and always regenerates gdb.pot.  This is
1614 # relatively harmless since the .po files do not directly depend on
1615 # it.  The .pot file is left in the build directory.  Since GDB's
1616 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1617 # files) force this rule.
1618 $(PACKAGE).pot: po/$(PACKAGE).pot
1619 po/$(PACKAGE).pot: force
1620         -test -d po || mkdir po
1621         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1622
1623
1624 #
1625 # YACC/LEX dependencies
1626 #
1627 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1628 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1629 # said LANG-exp.c rather than ./c-exp.c some makes would
1630 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1631 # decls for malloc/realloc/free which conflict with everything else.
1632 # Strictly speaking c-exp.c should therefore depend on
1633 # Makefile.in, but that was a pretty big annoyance.
1634
1635 .SUFFIXES: .y .l
1636 .y.c:
1637         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1638         -sed -e '/extern.*malloc/d' \
1639              -e '/extern.*realloc/d' \
1640              -e '/extern.*free/d' \
1641              -e '/include.*malloc.h/d' \
1642              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1643              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1644              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1645              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1646              -e '/^#line.*y.tab.c/d' \
1647           < $@.tmp > $@.new
1648         -rm $@.tmp
1649         mv $@.new ./$*.c
1650 .l.c:
1651         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1652             $(FLEX) -o$@ $< && \
1653             rm -f $@.new && \
1654             sed -e '/extern.*malloc/d' \
1655                 -e '/extern.*realloc/d' \
1656                 -e '/extern.*free/d' \
1657                 -e '/include.*malloc.h/d' \
1658                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1659                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1660                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1661                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1662                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1663               < $@ > $@.new && \
1664             rm -f $@ && \
1665             mv $@.new $@; \
1666         elif [ -f $@ ]; then \
1667             echo "Warning: $*.c older than $*.l and flex not available."; \
1668         else \
1669             echo "$@ missing and flex not available."; \
1670             false; \
1671         fi
1672
1673 .PRECIOUS: ada-exp.c ada-lex.c
1674 .PRECIOUS: c-exp.c
1675 .PRECIOUS: f-exp.c
1676 .PRECIOUS: jv-exp.c
1677 .PRECIOUS: m2-exp.c
1678 .PRECIOUS: objc-exp.c
1679 .PRECIOUS: p-exp.c
1680
1681 # XML rules
1682
1683 xml-builtin.c: stamp-xml; @true
1684 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1685         rm -f xml-builtin.tmp
1686         AWK="$(AWK)" \
1687           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1688           xml-builtin.tmp $(XMLFILES)
1689         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1690         echo stamp > stamp-xml
1691
1692 .PRECIOUS: xml-builtin.c
1693
1694 #
1695 # gdb/cli/ dependencies
1696 #
1697 # Need to explicitly specify the compile rule as make will do nothing
1698 # or try to compile the object file into the sub-directory.
1699
1700 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1701         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1702         $(POSTCOMPILE)
1703
1704 cli-decode.o: $(srcdir)/cli/cli-decode.c
1705         $(COMPILE) $(srcdir)/cli/cli-decode.c
1706         $(POSTCOMPILE)
1707
1708 cli-dump.o: $(srcdir)/cli/cli-dump.c
1709         $(COMPILE) $(srcdir)/cli/cli-dump.c
1710         $(POSTCOMPILE)
1711
1712 cli-interp.o: $(srcdir)/cli/cli-interp.c
1713         $(COMPILE) $(srcdir)/cli/cli-interp.c
1714         $(POSTCOMPILE)
1715
1716 cli-logging.o: $(srcdir)/cli/cli-logging.c
1717         $(COMPILE) $(srcdir)/cli/cli-logging.c
1718         $(POSTCOMPILE)
1719
1720 cli-script.o: $(srcdir)/cli/cli-script.c
1721         $(COMPILE) $(srcdir)/cli/cli-script.c
1722         $(POSTCOMPILE)
1723
1724 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1725         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1726         $(POSTCOMPILE)
1727
1728
1729 #
1730 # GDBTK sub-directory
1731 #
1732 # Need to explicitly specify the compile rule as make will do nothing
1733 # or try to compile the object file into the mi directory.
1734
1735 all-gdbtk: insight$(EXEEXT)
1736
1737 install-gdbtk:
1738         transformed_name=`t='$(program_transform_name)'; \
1739                   echo insight | sed -e $$t` ; \
1740         if test "x$$transformed_name" = x; then \
1741           transformed_name=insight ; \
1742         else \
1743           true ; \
1744         fi ; \
1745         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1746         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1747                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1748         $(SHELL) $(srcdir)/../mkinstalldirs \
1749                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1750         $(SHELL) $(srcdir)/../mkinstalldirs \
1751                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1752         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1753                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1754         $(SHELL) $(srcdir)/../mkinstalldirs \
1755                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1756                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1757         $(SHELL) $(srcdir)/../mkinstalldirs \
1758                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1759                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1760                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1761         cd $(srcdir)/gdbtk/library ; \
1762         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1763           do \
1764                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1765           done ;
1766
1767 uninstall-gdbtk:
1768         transformed_name=`t='$(program_transform_name)'; \
1769                   echo insight | sed -e $$t` ; \
1770         if test "x$$transformed_name" = x; then \
1771                 transformed_name=insight ; \
1772         else \
1773                 true ; \
1774         fi ; \
1775         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1776         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1777
1778 clean-gdbtk:
1779         rm -f insight$(EXEEXT)
1780
1781 # Removing the old gdb first works better if it is running, at least on SunOS.
1782 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1783                 $(CDEPS) $(TDEPLIBS)
1784         rm -f insight$(EXEEXT)
1785         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1786                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1787                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1788
1789 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1790         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1791
1792 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1793                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1794                 $(GDBTK_CFLAGS) \
1795                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1796                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1797
1798 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1799         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1800         $(POSTCOMPILE)
1801
1802 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1803         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1804         $(POSTCOMPILE)
1805
1806 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1807         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1808         $(POSTCOMPILE)
1809
1810 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1811         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1812         $(POSTCOMPILE)
1813
1814 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1815         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1816         $(POSTCOMPILE)
1817
1818 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1819         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1820         $(POSTCOMPILE)
1821
1822 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1823         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1824         $(POSTCOMPILE)
1825
1826 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1827         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1828         $(POSTCOMPILE)
1829
1830 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1831         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1832         $(POSTCOMPILE)
1833
1834 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1835         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1836         $(POSTCOMPILE)
1837
1838
1839 #
1840 # gdb/mi/ dependencies
1841 #
1842 # Need to explicitly specify the compile rule as make will do nothing
1843 # or try to compile the object file into the sub-directory.
1844
1845 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1846         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1847         $(POSTCOMPILE)
1848
1849 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1850         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1851         $(POSTCOMPILE)
1852
1853 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1854         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1855         $(POSTCOMPILE)
1856
1857 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1858         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1859         $(POSTCOMPILE)
1860
1861 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1862         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1863         $(POSTCOMPILE)
1864
1865 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1866         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1867         $(POSTCOMPILE)
1868
1869 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1870         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1871         $(POSTCOMPILE)
1872
1873 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1874         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1875         $(POSTCOMPILE)
1876
1877 mi-console.o: $(srcdir)/mi/mi-console.c
1878         $(COMPILE) $(srcdir)/mi/mi-console.c
1879         $(POSTCOMPILE)
1880
1881 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1882         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1883         $(POSTCOMPILE)
1884
1885 mi-interp.o: $(srcdir)/mi/mi-interp.c
1886         $(COMPILE) $(srcdir)/mi/mi-interp.c
1887         $(POSTCOMPILE)
1888
1889 mi-main.o: $(srcdir)/mi/mi-main.c
1890         $(COMPILE) $(srcdir)/mi/mi-main.c
1891         $(POSTCOMPILE)
1892
1893 mi-out.o: $(srcdir)/mi/mi-out.c
1894         $(COMPILE) $(srcdir)/mi/mi-out.c
1895         $(POSTCOMPILE)
1896
1897 mi-parse.o: $(srcdir)/mi/mi-parse.c
1898         $(COMPILE) $(srcdir)/mi/mi-parse.c
1899         $(POSTCOMPILE)
1900
1901 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1902         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1903         $(POSTCOMPILE)
1904
1905 mi-common.o: $(srcdir)/mi/mi-common.c
1906         $(COMPILE) $(srcdir)/mi/mi-common.c
1907         $(POSTCOMPILE)
1908
1909 #
1910 # gdb/common/ dependencies
1911 #
1912 # Need to explicitly specify the compile rule as make will do nothing
1913 # or try to compile the object file into the sub-directory.
1914
1915 signals.o: $(srcdir)/common/signals.c
1916         $(COMPILE) $(srcdir)/common/signals.c
1917         $(POSTCOMPILE)
1918
1919 #
1920 # gdb/tui/ dependencies
1921 #
1922 # Need to explicitly specify the compile rule as make will do nothing
1923 # or try to compile the object file into the sub-directory.
1924
1925 tui.o: $(srcdir)/tui/tui.c
1926         $(COMPILE) $(srcdir)/tui/tui.c
1927         $(POSTCOMPILE)
1928
1929 tui-command.o: $(srcdir)/tui/tui-command.c
1930         $(COMPILE) $(srcdir)/tui/tui-command.c
1931         $(POSTCOMPILE)
1932
1933 tui-data.o: $(srcdir)/tui/tui-data.c
1934         $(COMPILE) $(srcdir)/tui/tui-data.c
1935         $(POSTCOMPILE)
1936
1937 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1938         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1939         $(POSTCOMPILE)
1940
1941 tui-file.o: $(srcdir)/tui/tui-file.c
1942         $(COMPILE) $(srcdir)/tui/tui-file.c
1943         $(POSTCOMPILE)
1944
1945 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1946         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1947         $(POSTCOMPILE)
1948
1949 tui-interp.o: $(srcdir)/tui/tui-interp.c
1950         $(COMPILE) $(srcdir)/tui/tui-interp.c
1951         $(POSTCOMPILE)
1952
1953 tui-io.o: $(srcdir)/tui/tui-io.c
1954         $(COMPILE) $(srcdir)/tui/tui-io.c
1955         $(POSTCOMPILE)
1956
1957 tui-layout.o: $(srcdir)/tui/tui-layout.c
1958         $(COMPILE) $(srcdir)/tui/tui-layout.c
1959         $(POSTCOMPILE)
1960
1961 tui-main.o: $(srcdir)/tui/tui-main.c
1962         $(COMPILE) $(srcdir)/tui/tui-main.c
1963         $(POSTCOMPILE)
1964
1965 tui-out.o: $(srcdir)/tui/tui-out.c
1966         $(COMPILE) $(srcdir)/tui/tui-out.c
1967         $(POSTCOMPILE)
1968
1969 tui-regs.o: $(srcdir)/tui/tui-regs.c
1970         $(COMPILE) $(srcdir)/tui/tui-regs.c
1971         $(POSTCOMPILE)
1972
1973 tui-source.o: $(srcdir)/tui/tui-source.c
1974         $(COMPILE) $(srcdir)/tui/tui-source.c
1975         $(POSTCOMPILE)
1976
1977 tui-stack.o: $(srcdir)/tui/tui-stack.c
1978         $(COMPILE) $(srcdir)/tui/tui-stack.c
1979         $(POSTCOMPILE)
1980
1981 tui-win.o: $(srcdir)/tui/tui-win.c
1982         $(COMPILE) $(srcdir)/tui/tui-win.c
1983         $(POSTCOMPILE)
1984
1985 tui-windata.o: $(srcdir)/tui/tui-windata.c
1986         $(COMPILE) $(srcdir)/tui/tui-windata.c
1987         $(POSTCOMPILE)
1988
1989 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1990         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1991         $(POSTCOMPILE)
1992
1993 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1994         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1995         $(POSTCOMPILE)
1996
1997 #
1998 # gdb/python/ dependencies
1999 #
2000 # Need to explicitly specify the compile rule as make will do nothing
2001 # or try to compile the object file into the sub-directory.
2002
2003 # Flags needed to compile Python code
2004 PYTHON_CFLAGS=@PYTHON_CFLAGS@
2005
2006 python.o: $(srcdir)/python/python.c
2007         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
2008         $(POSTCOMPILE)
2009
2010 py-auto-load.o: $(srcdir)/python/py-auto-load.c
2011         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c
2012         $(POSTCOMPILE)
2013
2014 py-block.o: $(srcdir)/python/py-block.c
2015         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
2016         $(POSTCOMPILE)
2017
2018 py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
2019         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
2020         $(POSTCOMPILE)
2021
2022 py-cmd.o: $(srcdir)/python/py-cmd.c
2023         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
2024         $(POSTCOMPILE)
2025
2026 py-frame.o: $(srcdir)/python/py-frame.c
2027         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
2028         $(POSTCOMPILE)
2029
2030 py-function.o: $(srcdir)/python/py-function.c
2031         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
2032         $(POSTCOMPILE)
2033
2034 py-inferior.o: $(srcdir)/python/py-inferior.c
2035         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c
2036         $(POSTCOMPILE)
2037
2038 py-infthread.o: $(srcdir)/python/py-infthread.c
2039         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c
2040         $(POSTCOMPILE)
2041
2042 py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
2043         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
2044         $(POSTCOMPILE)
2045
2046 py-objfile.o: $(srcdir)/python/py-objfile.c
2047         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
2048         $(POSTCOMPILE)
2049
2050 py-param.o: $(srcdir)/python/py-param.c
2051         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c
2052         $(POSTCOMPILE)
2053
2054 py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
2055         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
2056         $(POSTCOMPILE)
2057
2058 py-progspace.o: $(srcdir)/python/py-progspace.c
2059         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c
2060         $(POSTCOMPILE)
2061
2062 py-symbol.o: $(srcdir)/python/py-symbol.c
2063         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
2064         $(POSTCOMPILE)
2065
2066 py-symtab.o: $(srcdir)/python/py-symtab.c
2067         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
2068         $(POSTCOMPILE)
2069
2070 py-type.o: $(srcdir)/python/py-type.c
2071         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
2072         $(POSTCOMPILE)
2073
2074 py-utils.o: $(srcdir)/python/py-utils.c
2075         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
2076         $(POSTCOMPILE)
2077
2078 py-value.o: $(srcdir)/python/py-value.c
2079         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
2080         $(POSTCOMPILE)
2081
2082 #
2083 # Dependency tracking.  Most of this is conditional on GNU Make being
2084 # found by configure; if GNU Make is not found, we fall back to a
2085 # simpler scheme.
2086 #
2087
2088 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
2089 # Note that we put the dependencies into a .Tpo file, then move them
2090 # into place if the compile succeeds.  We need this because gcc does
2091 # not atomically write the dependency output file.
2092 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2093 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
2094 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
2095 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
2096 @GMAKE_TRUE@else
2097 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
2098 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
2099 # depcomp handles atomicity for us, so we don't need a postcompile
2100 # step.
2101 @GMAKE_TRUE@override POSTCOMPILE =
2102 @GMAKE_TRUE@endif
2103
2104 # A list of all the objects we might care about in this build, for
2105 # dependency tracking.
2106 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
2107         test-cp-name-parser.o
2108
2109 # Ensure that generated files are created early.  Use order-only
2110 # dependencies if available.  They require GNU make 3.80 or newer,
2111 # and the .VARIABLES variable was introduced at the same time.
2112 @GMAKE_TRUE@ifdef .VARIABLES
2113 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
2114 @GMAKE_TRUE@else
2115 $(all_object_files) : $(generated_files)
2116 @GMAKE_TRUE@endif
2117
2118 # Dependencies.
2119 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
2120
2121 ### end of the gdb Makefile.in.