1 # Copyright (C) 1989-2014 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 install_sh
= @install_sh@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
62 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
63 INSTALL_DATA
= @INSTALL_DATA@
82 # If you are compiling with GCC, make sure that either 1) You have the
83 # fixed include files where GCC can reach them, or 2) You use the
84 # -traditional flag. Otherwise the ioctl calls in inflow.c
85 # will be incorrectly compiled. The "fixincludes" script in the gcc
86 # distribution will fix your include files up.
89 # Dependency tracking information.
92 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
94 # Note that these are overridden by GNU make-specific code below if
95 # GNU make is used. The overrides implement dependency tracking.
97 COMPILE.post
= -c
-o
$@
98 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
101 # Directory containing source files.
107 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
108 # not defined, but ada-lex.c is present, compilation will continue,
109 # possibly with a warning.
112 YLWRAP
= $(srcdir)/..
/ylwrap
114 # where to find makeinfo, preferably one designed for texinfo-2
115 MAKEINFO
= @MAKEINFO@
116 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
117 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
118 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
120 MAKEHTML
= $(MAKEINFO_CMD
) --html
123 # Set this up with gcc if you have gnu ld and the loader will print out
124 # line numbers for undefined references.
128 # Where is our "include" directory? Typically $(srcdir)/../include.
129 # This is essentially the header file directory for the library
130 # routines in libiberty.
131 INCLUDE_DIR
= $(srcdir)/..
/include
132 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
134 # Where is the "-liberty" library? Typically in ../libiberty.
135 LIBIBERTY
= ..
/libiberty
/libiberty.a
137 # Where is the BFD library? Typically in ../bfd.
139 BFD
= $(BFD_DIR
)/libbfd.a
140 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
141 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
143 # Where is the decnumber library? Typically in ../libdecnumber.
144 LIBDECNUMBER_DIR
= ..
/libdecnumber
145 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
146 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
147 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
149 # Where is the READLINE library? Typically in ../readline.
150 READLINE_DIR
= ..
/readline
151 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
152 READLINE
= @READLINE@
153 READLINE_DEPS
= @READLINE_DEPS@
154 READLINE_CFLAGS
= @READLINE_CFLAGS@
156 # Where is expat? This will be empty if expat was not available.
157 LIBEXPAT
= @LIBEXPAT@
159 # Where is lzma? This will be empty if lzma was not available.
162 # Where is libbabeltrace? This will be empty if lbabeltrace was not
164 LIBBABELTRACE
= @LIBBABELTRACE@
166 WARN_CFLAGS
= @WARN_CFLAGS@
167 WERROR_CFLAGS
= @WERROR_CFLAGS@
168 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
169 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
171 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
172 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
173 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
174 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
176 RDYNAMIC
= @RDYNAMIC@
178 # Where is the INTL library? Typically in ../intl.
180 INTL_DEPS
= @LIBINTL_DEP@
181 INTL_CFLAGS
= @INCINTL@
183 # Did the user give us a --with-gdb-datadir option?
184 GDB_DATADIR
= @GDB_DATADIR@
186 # Flags to pass to gdb when invoked with "make run".
189 # Helper code from gnulib.
190 GNULIB_BUILDDIR
= build-gnulib
191 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
192 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
194 # Generated headers in the gnulib directory. These must be listed
195 # so that they are generated before other files are compiled.
196 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
199 # CLI sub directory definitons
203 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
205 cli-interp.o cli-utils.o
208 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
210 cli
/cli-interp.c cli
/cli-utils.c
216 # MI sub directory definitons
219 mi-out.o mi-console.o \
220 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
221 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
222 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
223 mi-cmd-info.o mi-interp.o \
224 mi-main.o mi-parse.o mi-getopt.o
226 mi
/mi-out.c mi
/mi-console.c \
227 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
228 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
229 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
230 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
231 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
237 # TUI sub directory definitions
274 tui
/tui-wingeneral.c \
275 tui
/tui-winsource.c \
283 # Guile sub directory definitons for guile support.
308 SUBDIR_GUILE_SRCS
= \
311 guile
/scm-auto-load.c \
313 guile
/scm-breakpoint.c \
315 guile
/scm-exception.c \
318 guile
/scm-iterator.c \
319 guile
/scm-lazy-string.c \
320 guile
/scm-objfile.c \
323 guile
/scm-pretty-print.c \
324 guile
/scm-safe-call.c \
332 SUBDIR_GUILE_LDFLAGS
=
336 # python sub directory definitons
338 SUBDIR_PYTHON_OBS
= \
351 py-finishbreakpoint.o \
360 py-newobjfileevent.o \
374 SUBDIR_PYTHON_SRCS
= \
377 python
/py-auto-load.c \
379 python
/py-bpevent.c \
380 python
/py-breakpoint.c \
382 python
/py-continueevent.c \
384 python
/py-evtregistry.c \
386 python
/py-exitedevent.c \
387 python
/py-finishbreakpoint.c \
389 python
/py-framefilter.c \
390 python
/py-function.c \
391 python
/py-gdb-readline.c \
392 python
/py-inferior.c \
393 python
/py-infthread.c \
394 python
/py-lazy-string.c \
395 python
/py-linetable.c \
396 python
/py-newobjfileevent.c \
397 python
/py-objfile.c \
399 python
/py-prettyprint.c \
400 python
/py-progspace.c \
401 python
/py-signalevent.c \
402 python
/py-stopevent.c \
405 python
/py-threadevent.c \
410 SUBDIR_PYTHON_LDFLAGS
=
411 SUBDIR_PYTHON_CFLAGS
=
413 # Opcodes currently live in one of two places. Either they are in the
414 # opcode library, typically ../opcodes, or they are in a header file
416 # Where is the "-lopcodes" library, with (some of) the opcode tables and
418 OPCODES_DIR
= ..
/opcodes
419 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
420 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
421 # Where are the other opcode tables which only have header file
423 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
424 # Some source files like to use #include "opcodes/file.h"
425 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
427 # The simulator is usually nonexistent; targets that include one
428 # should set this to list all the .o or .a files to be linked in.
431 WIN32LIBS
= @WIN32LIBS@
433 # Tcl et al cflags and libraries
435 TCL_CFLAGS
= @TCL_INCLUDE@
436 GDBTKLIBS
= @GDBTKLIBS@
437 # Extra flags that the GDBTK files need:
438 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
441 TK_CFLAGS
= @TK_INCLUDE@
443 X11_CFLAGS
= @TK_XINCLUDES@
447 WIN32LDAPP
= @WIN32LDAPP@
450 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
451 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
453 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
455 # The version of gdbtk we're building. This should be kept
456 # in sync with GDBTK_VERSION and friends in gdbtk.h.
458 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
460 # Gdbtk requires an absolute path to the source directory or
461 # the testsuite won't run properly.
462 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
465 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
466 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
467 SUBDIR_GDBTK_SRCS
= \
468 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
469 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
470 gdbtk
/generic
/gdbtk-interp.c \
471 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
472 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
473 gdbtk
/generic
/gdbtk-main.c
474 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
475 SUBDIR_GDBTK_LDFLAGS
=
476 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
478 CONFIG_OBS
= @CONFIG_OBS@
479 CONFIG_SRCS
= @CONFIG_SRCS@
480 CONFIG_DEPS
= @CONFIG_DEPS@
481 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
482 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
483 CONFIG_ALL
= @CONFIG_ALL@
484 CONFIG_CLEAN
= @CONFIG_CLEAN@
485 CONFIG_INSTALL
= @CONFIG_INSTALL@
486 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
487 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
489 # -I. for config files.
490 # -I$(srcdir) for gdb internal headers.
491 # -I$(srcdir)/config for more generic config files.
493 # It is also possible that you will need to add -I/usr/include/sys if
494 # your system doesn't have fcntl.h in /usr/include (which is where it
495 # should be according to Posix).
497 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
498 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
500 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
501 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
503 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
505 # CFLAGS is specifically reserved for setting from the command line
506 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
509 # Set by configure, for e.g. expat. Python installations are such that
510 # C headers are included using their basename (for example, we #include
511 # <Python.h> rather than, say, <python/Python.h>). Since the file names
512 # are sometimes a little generic, we think that the risk of collision
513 # with other header files is high. If that happens, we try to mitigate
514 # a bit the consequences by putting the Python includes last in the list.
515 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
517 # Need to pass this to testsuite for "make check". Probably should be
518 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
519 # so "make check" has the same result no matter where it is run.
522 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
523 INTERNAL_CFLAGS_BASE
= \
524 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
525 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
526 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
527 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
528 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
529 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
531 # LDFLAGS is specifically reserved for setting from the command line
535 # Profiling options need to go here to work.
536 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
537 # and have it work; that's why CFLAGS is here.
538 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
539 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
541 # If your system is missing alloca(), or, more likely, it's there but
542 # it doesn't work, then refer to libiberty.
544 # Libraries and corresponding dependencies for compiling gdb.
545 # XM_CLIBS, defined in *config files, have host-dependent libs.
546 # LIBIBERTY appears twice on purpose.
547 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
548 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
549 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
550 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) \
551 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
552 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
553 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
555 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
556 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
561 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
562 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
568 # XML files to build in to GDB.
569 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
570 $(srcdir)/features
/library-list.dtd \
571 $(srcdir)/features
/library-list-aix.dtd \
572 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
573 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd \
574 $(srcdir)/features
/btrace.dtd
576 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
577 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
578 # etc., then there will be (as part of the C library or perhaps as
579 # part of libiberty) a POSIX interface. But at least for now the
580 # host-dependent makefile fragment might need to use something else
582 SER_HARDWIRE
= @SER_HARDWIRE@
584 # The `remote' debugging target is supported for most architectures,
585 # but not all (e.g. 960)
586 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
587 remote-notif.o ctf.o tracefile.o tracefile-tfile.o
589 # This is remote-sim.o if a simulator is to be linked in.
592 # Target-dependent object files.
593 TARGET_OBS
= @TARGET_OBS@
595 # All target-dependent objects files that require 64-bit CORE_ADDR
596 # (used with --enable-targets=all --enable-64-bit-bfd).
597 ALL_64_TARGET_OBS
= \
598 aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
599 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
600 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
601 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
602 amd64-linux-tdep.o amd64nbsd-tdep.o \
603 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
604 ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
606 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
607 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
609 # All other target-dependent objects files (used with --enable-targets=all).
611 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
612 armnbsd-tdep.o armobsd-tdep.o \
613 arm-tdep.o arm-wince-tdep.o \
615 bfin-linux-tdep.o bfin-tdep.o \
616 cris-linux-tdep.o cris-tdep.o \
618 frv-linux-tdep.o frv-tdep.o \
620 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
621 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
622 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
623 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
624 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
625 i386-dicos-tdep.o i386-darwin-tdep.o \
630 m32r-linux-tdep.o m32r-tdep.o \
632 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
635 microblaze-tdep.o microblaze-linux-tdep.o \
636 mips-irix-tdep.o mips-linux-tdep.o \
637 mipsnbsd-tdep.o mips-tdep.o \
638 mn10300-linux-tdep.o mn10300-tdep.o \
642 nios2-tdep.o nios2-linux-tdep.o \
644 ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
645 ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
646 rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
647 rs6000-lynx178-tdep.o \
651 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
652 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
653 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
654 spu-tdep.o spu-multiarch.o solib-spu.o \
655 tic6x-tdep.o tic6x-linux-tdep.o \
656 tilegx-tdep.o tilegx-linux-tdep.o \
658 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
660 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
663 nbsd-tdep.o obsd-tdep.o \
665 solib-frv.o solib-irix.o solib-svr4.o \
666 solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
667 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
668 remote-m32r-sdi.o remote-mips.o \
675 # Host-dependent makefile fragment comes in here.
677 # End of host-dependent makefile fragment
681 "exec_prefix=$(exec_prefix)" \
682 "infodir=$(infodir)" \
683 "datarootdir=$(datarootdir)" \
685 "htmldir=$(htmldir)" \
689 "datadir=$(datadir)" \
690 "includedir=$(includedir)" \
691 "against=$(against)" \
692 "DESTDIR=$(DESTDIR)" \
694 "AR_FLAGS=$(AR_FLAGS)" \
698 "CXXFLAGS=$(CXXFLAGS)" \
699 "DLLTOOL=$(DLLTOOL)" \
700 "LDFLAGS=$(LDFLAGS)" \
702 "MAKEINFO=$(MAKEINFO)" \
703 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
704 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
705 "MAKEHTML=$(MAKEHTML)" \
706 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
707 "INSTALL=$(INSTALL)" \
708 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
709 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
710 "INSTALL_DATA=$(INSTALL_DATA)" \
711 "RUNTEST=$(RUNTEST)" \
712 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
714 # Flags that we pass when building the testsuite.
716 # empty for native, $(target_alias)/ for cross
717 target_subdir
= @target_subdir@
720 if [ -f $${rootme}/../gcc/xgcc ] ; then \
721 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
722 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
724 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
727 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
730 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
736 if [ -f $${rootme}/../gcc/xgcc ] ; then \
737 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
738 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
740 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
743 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
746 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
750 # The use of $$(x_FOR_TARGET) reduces the command line length by not
751 # duplicating the lengthy definition.
752 TARGET_FLAGS_TO_PASS
= \
754 "exec_prefix=$(exec_prefix)" \
755 "against=$(against)" \
756 'CC=$$(CC_FOR_TARGET)' \
757 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
759 'CXX=$$(CXX_FOR_TARGET)' \
760 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
761 "CXXFLAGS=$(CXXFLAGS)" \
762 "INSTALL=$(INSTALL)" \
763 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
764 "INSTALL_DATA=$(INSTALL_DATA)" \
765 "MAKEINFO=$(MAKEINFO)" \
766 "MAKEHTML=$(MAKEHTML)" \
767 "RUNTEST=$(RUNTEST)" \
768 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
769 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
772 # All source files that go into linking GDB.
773 # Links made at configuration time should not be specified here, since
774 # SFILES is used in building the distribution archive.
776 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
778 addrmap.c auto-load.c \
779 auxv.c ax-general.c ax-gdb.c \
783 block.c blockframe.c \
784 breakpoint.c break-catch-sig.c break-catch-throw.c \
785 build-id.c buildsym.c \
786 c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
787 charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
788 complaints.c completer.c continuations.c corefile.c corelow.c \
789 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
790 d-lang.c d-support.c d-valprint.c \
792 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
793 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
794 dwarf2-frame-tailcall.c \
795 elfread.c environ.c eval.c event-loop.c event-top.c \
796 exceptions.c expprint.c extension.c \
797 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
798 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
799 gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
800 gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
801 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
804 infcmd.c inflow.c infrun.c \
807 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
808 language.c linespec.c minidebug.c \
809 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
810 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
811 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
812 memrange.c mi
/mi-common.c \
814 objfiles.c osabi.c observer.c osdata.c \
816 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
817 proc-service.list progspace.c \
818 prologue-value.c psymtab.c \
819 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
821 serial.c ser-base.c ser-unix.c skip.c \
822 solib.c solib-target.c source.c \
823 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
824 symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
825 target.c target-dcache.c target-descriptions.c target-memory.c \
826 thread.c top.c tracepoint.c \
830 ui-out.c utils.c ui-file.h ui-file.c \
832 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
833 xml-tdesc.c xml-support.c \
834 inferior.c gdb_usleep.c \
835 record.c record-full.c gcore.c \
838 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
839 regset.c sol-thread.c windows-termcap.c \
840 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
841 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
842 common
/format.c common
/filestuff.c btrace.c record-btrace.c ctf.c \
843 target
/waitstatus.c common
/print-utils.c common
/rsp-low.c
845 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
847 # Header files that need to have srcdir added. Note that in the cases
848 # where we use a macro like $(gdbcmd_h), things are carefully arranged
849 # so that each .h file is listed exactly once (M-x tags-search works
850 # wrong if TAGS has files twice). Because this is tricky to get
851 # right, it is probably easiest just to list .h files here directly.
854 common
/gdb_signals.h common
/gdb_thread_db.h common
/gdb_vecs.h \
855 common
/i386-xstate.h common
/linux-ptrace.h common
/mips-linux-watch.h \
856 proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
857 ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
858 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
859 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
860 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
861 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
862 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h \
863 cli
/cli-script.h macrotab.h symtab.h common
/version.h \
864 gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
865 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
866 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
867 amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
868 gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
869 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
870 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
871 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
872 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
873 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
874 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
875 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
876 m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
877 target.h target-dcache.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
878 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
879 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
880 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
881 tui
/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
882 expression.h score-tdep.h gdb_select.h ser-tcp.h \
883 extension.h extension-priv.h \
884 build-id.h buildsym.h valprint.h \
885 typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
886 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
887 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
888 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
889 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
890 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
891 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
892 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
893 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
894 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
895 rs6000-tdep.h rs6000-aix-tdep.h \
896 common
/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
897 language.h nbsd-tdep.h solib-svr4.h \
898 macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
899 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
900 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
901 config
/i386
/nm-fbsd.h \
902 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
903 top.h bsd-kvm.h gdb-stabs.h reggroups.h \
904 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
905 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
906 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
907 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
908 psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
909 amd64-darwin-tdep.h charset-list.h \
910 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
911 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
912 i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
913 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
914 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
915 record-full.h solib-aix.h \
916 solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
917 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
918 gnulib
/import
/extra
/snippet
/warn-on-use.h \
919 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
920 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
921 common
/format.h common
/host-defs.h utils.h common
/queue.h \
922 common
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
923 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common
/linux-btrace.h \
924 ctf.h common
/i386-cpuid.h common
/i386-gcc-cpuid.h target
/resume.h \
925 target
/wait.h target
/waitstatus.h nat
/linux-nat.h nat
/linux-waitpid.h \
926 common
/print-utils.h common
/rsp-low.h
928 # Header files that already have srcdir in them, or which are in objdir.
930 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
933 # GDB "info" files, which should be included in their entirety
934 INFOFILES
= gdb.
info*
936 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
938 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
939 # default their values the way we do for SER_HARDWIRE; in the future
940 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
941 # variables analogous to SER_HARDWIRE which get defaulted in this
944 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
945 $(REMOTE_OBS
) $(SIM_OBS
)
947 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
948 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
949 # and it's more useful to see it in the .y file.
950 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
952 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
954 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
961 blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
962 findvar.o regcache.o cleanups.o \
963 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
964 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
965 block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
966 linespec.o dictionary.o \
969 expprint.o environ.o stack.o thread.o \
978 macrotab.o macrocmd.o macroexp.o macroscope.o \
980 event-loop.o event-top.o inf-loop.o completer.o \
981 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
983 memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
984 build-id.o buildsym.o \
989 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
990 dbxread.o coffread.o coff-pe-read.o \
991 dwarf2read.o mipsread.o stabsread.o corefile.o \
992 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
993 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
994 ada-tasks.o ada-varobj.o c-varobj.o \
997 go-lang.o go-valprint.o go-typeprint.o \
998 jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
999 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
1001 complaints.o typeprint.o \
1002 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
1003 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
1005 serial.o mdebugread.o top.o utils.o \
1008 frame.o frame-unwind.o doublest.o \
1011 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
1014 reggroups.o regset.o \
1017 solib.o solib-target.o \
1018 prologue-value.o memory-map.o memrange.o \
1019 xml-support.o xml-syscall.o xml-utils.o \
1020 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
1021 inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
1022 gdb_vecs.o jit.o progspace.o skip.o probe.o \
1023 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
1024 format.o registry.o btrace.o record-btrace.o waitstatus.o \
1025 print-utils.o rsp-low.o
1029 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1030 CLEANDIRS
= $(SUBDIRS
)
1032 # List of subdirectories in the build tree that must exist.
1033 # This is used to force build failures in existing trees when
1034 # a new directory is added.
1035 # The format here is for the `case' shell command.
1036 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1038 # For now, shortcut the "configure GDB for fewer languages" stuff.
1044 f-exp.c go-exp.c m2-exp.c p-exp.c
1049 f-exp.o go-exp.o m2-exp.o p-exp.o
1051 # Things which need to be built when making a distribution.
1053 DISTSTUFF
= $(YYFILES
)
1056 # All generated files which can be included by another file.
1057 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
1058 $(GNULIB_H
) $(NAT_GENERATED_FILES
) gcore
1064 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1065 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1069 # The check target can not use subdir_do, because subdir_do does not
1070 # use TARGET_FLAGS_TO_PASS.
1072 @if
[ -f testsuite
/Makefile
]; then \
1073 rootme
=`pwd`; export rootme
; \
1074 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1076 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1080 @if
[ -f testsuite
/Makefile
]; then \
1081 rootme
=`pwd`; export rootme
; \
1082 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1084 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1087 # The idea is to parallelize testing of multilibs, for example:
1088 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1089 # will run 3 concurrent sessions of check, eventually testing all 10
1090 # combinations. GNU make is required for the % pattern to work, as is
1091 # a shell that expands alternations within braces. If GNU make is not
1092 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1093 # prevent serialized checking due to the passed RUNTESTFLAGS.
1094 # FIXME: use config.status --config not --version, when available.
1096 @if
[ -f testsuite
/config.status
]; then \
1097 rootme
=`pwd`; export rootme
; \
1098 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1099 target
=`echo "$@" | sed 's,//.*,,'`; \
1100 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1101 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1102 testdir
=testsuite.
$$vardots; \
1103 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1104 configargs
=`cd testsuite && ./config.status --version | \
1105 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1106 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1108 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1109 "\"--srcdir=\$$rootsrc/testsuite\"" \
1111 else :; fi
&& cd
$$testdir && \
1112 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1113 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1114 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1118 # The set of headers checked by 'check-headers' by default.
1119 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1121 # Try to compile each header in isolation, thus ensuring headers are
1124 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1128 # make check-headers CHECK_HEADERS="header.h list.h"
1130 # to check specific headers.
1133 @echo Checking headers.
1134 for i in
$(CHECK_HEADERS
) ; do \
1135 $(CC
) -x c
-c
-fsyntax-only
$(INTERNAL_CFLAGS
) \
1136 -include defs.h
$(srcdir)/$$i ; \
1138 .PHONY
: check-headers
1140 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1141 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1143 # Traditionally "install" depends on "all". But it may be useful
1144 # not to; for example, if the user has made some trivial change to a
1145 # source file and doesn't care about rebuilding or just wants to save the
1146 # time it takes for make to check that all is up to date.
1147 # install-only is intended to address that need.
1149 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1151 install-only
: $(CONFIG_INSTALL
)
1152 transformed_name
=`t='$(program_transform_name)'; \
1153 echo gdb | sed -e "$$t"` ; \
1154 if
test "x$$transformed_name" = x
; then \
1155 transformed_name
=gdb
; \
1159 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1160 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1161 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1162 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1163 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1164 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1166 transformed_name
=`t='$(program_transform_name)'; \
1167 echo gcore | sed -e "$$t"` ; \
1168 if
test "x$$transformed_name" = x
; then \
1169 transformed_name
=gcore
; \
1173 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1174 $(INSTALL_SCRIPT
) gcore \
1175 $(DESTDIR
)$(bindir)/$$transformed_name; \
1177 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1180 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1181 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1182 `test -z '$(STRIP)' || \
1183 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1186 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1189 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1191 uninstall: force $(CONFIG_UNINSTALL
)
1192 transformed_name
=`t='$(program_transform_name)'; \
1193 echo gdb | sed -e $$t` ; \
1194 if
test "x$$transformed_name" = x
; then \
1195 transformed_name
=gdb
; \
1199 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1200 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1201 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1203 transformed_name
=`t='$(program_transform_name)'; \
1204 echo gcore | sed -e "$$t"` ; \
1205 if
test "x$$transformed_name" = x
; then \
1206 transformed_name
=gcore
; \
1210 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1212 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1214 # The C++ name parser can be built standalone for testing.
1215 test-cp-name-parser.o
: cp-name-parser.c
1216 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1219 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1220 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1221 test-cp-name-parser.o
$(LIBIBERTY
)
1223 # We do this by grepping through sources. If that turns out to be too slow,
1224 # maybe we could just require every .o file to have an initialization routine
1225 # of a given name (top.o -> _initialize_top, etc.).
1227 # Formatting conventions: The name of the _initialize_* routines must start
1228 # in column zero, and must not be inside #if.
1230 # Note that the set of files with init functions might change, or the names
1231 # of the functions might change, so this files needs to depend on all the
1232 # object files that will be linked into gdb.
1234 # FIXME: There is a problem with this approach - init.c may force
1235 # unnecessary files to be linked in.
1237 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1238 # the first call is to _initialize_gdbtypes (implemented by explicitly
1239 # putting that function's name first in the init.l-tmp file). This is
1240 # a hack to ensure that all the architecture dependant global
1241 # builtin_type_* variables are initialized before anything else
1242 # (per-architecture code is called in the same order that it is
1243 # registered). The ``correct fix'' is to have all the builtin types
1244 # made part of the architecture and initialize them on-demand (using
1245 # gdbarch_data) just like everything else. The catch is that other
1246 # modules still take the address of these builtin types forcing them
1247 # to be variables, sigh!
1249 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1250 # anchored on the first column and excludes the ``/'' character so
1251 # that it doesn't add the $(srcdir) prefix to any file that already
1252 # has an absolute path. It turns out that $(DEC)'s True64 make
1253 # automatically adds the $(srcdir) prefixes when it encounters files
1254 # in sub-directories such as cli/ and mi/.
1256 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1257 # duplicates. Files in the gdb/ directory can end up appearing in
1258 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1260 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1261 init.c
: $(INIT_FILES
)
1263 @
rm -f init.c-tmp init.l-tmp
1265 @echo gdbtypes
> init.l-tmp
1266 @
-LANG
=C
; export LANG
; \
1267 LC_ALL
=C
; export LC_ALL
; \
1268 echo
$(INIT_FILES
) | \
1271 -e
'/^gdbtypes.[co]$$/d' \
1272 -e
'/^init.[co]$$/d' \
1273 -e
'/xdr_ld.[co]$$/d' \
1274 -e
'/xdr_ptrace.[co]$$/d' \
1275 -e
'/xdr_rdb.[co]$$/d' \
1276 -e
'/udr.[co]$$/d' \
1277 -e
'/udip2soc.[co]$$/d' \
1278 -e
'/udi2go32.[co]$$/d' \
1279 -e
'/version.[co]$$/d' \
1280 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1281 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1282 -e
's/\.[co]$$/.c/' \
1283 -e
's,signals\.c,common/signals\.c,' \
1284 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1286 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1291 * ) echo
$$f ; fs
="$$fs $$f";; \
1294 @echo
'/* Do not modify this file. */' >>init.c-tmp
1295 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1296 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1297 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1298 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1299 @echo
'void' >>init.c-tmp
1300 @echo
'initialize_all_files (void)' >>init.c-tmp
1301 @echo
'{' >>init.c-tmp
1302 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1303 @echo
'}' >>init.c-tmp
1305 @mv init.c-tmp init.c
1309 # Create a library of the gdb object files and build GDB by linking
1312 # init.o is very important. It pulls in the rest of GDB.
1313 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1314 libgdb.a
: $(LIBGDB_OBS
)
1316 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1319 # Removing the old gdb first works better if it is running, at least on SunOS.
1320 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1322 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1323 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1324 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1326 # Convenience rule to handle recursion.
1327 $(LIBGNU
) $(GNULIB_H
): all-lib
1328 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1329 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1332 # Convenience rule to handle recursion.
1333 .PHONY
: all-data-directory
1334 all-data-directory
: data-directory
/Makefile
1335 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1337 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1338 # on itself without copying the executable. So "make gdb1" will make
1339 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1340 # Removing gdb1 before the copy is the right thing if gdb1 is open
1341 # in another process.
1342 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1344 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1346 # Put the proper machine-specific files first, so M-. on a machine
1347 # specific routine gets the one for the correct machine. (FIXME: those
1348 # files go in twice; we should be removing them from the main list).
1350 # TAGS depends on all the files that go into it so you can rebuild TAGS
1351 # with `make TAGS' and not have to say `rm TAGS' first.
1353 GDB_NM_FILE
= @GDB_NM_FILE@
1354 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1356 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1357 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1358 echo $(srcdir)/$$i ; \
1359 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1361 done) | sed -e 's/\.o$$/\.c/'` \
1362 `find $(srcdir)/config -name '*.h' -print`
1366 clean mostlyclean: $(CONFIG_CLEAN
)
1367 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1368 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1369 rm -f init.c version.c observer.h observer.inc
1370 rm -f gdb
$(EXEEXT
) core make.log
1371 rm -f gdb
[0-9]$(EXEEXT
)
1372 rm -f test-cp-name-parser
$(EXEEXT
)
1373 rm -f xml-builtin.c stamp-xml
1376 # This used to depend on c-exp.c m2-exp.c TAGS
1377 # I believe this is wrong; the makefile standards for distclean just
1378 # describe removing files; the only sort of "re-create a distribution"
1379 # functionality described is if the distributed files are unmodified.
1380 # NB: While GDBSERVER might be configured on native systems, it isn't
1381 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1383 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1384 rm -rf
$(GNULIB_BUILDDIR
)
1385 rm -f gdbserver
/config.status gdbserver
/config.log
1386 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1387 rm -f gdbserver
/Makefile gdbserver
/config.cache
1388 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1389 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1390 rm -f config.log config.cache
1394 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1395 realclean: maintainer-clean
1397 local-maintainer-clean
:
1398 @echo
"This command is intended for maintainers to use;"
1399 @echo
"it deletes files that may require special tools to rebuild."
1402 ada-lex.c ada-exp.c \
1404 f-exp.c go-exp.c m2-exp.c p-exp.c
1405 rm -f TAGS
$(INFOFILES
)
1407 rm -f nm.h config.status
1409 do-maintainer-clean
:
1410 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1413 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1414 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1417 @for i in
$(DODIRS
); do \
1419 $(REQUIRED_SUBDIRS
)) \
1420 if
[ ! -f .
/$$i/Makefile
] ; then \
1421 echo
"Missing $$i/Makefile" >&2 ; \
1425 if
[ -f .
/$$i/Makefile
] ; then \
1427 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1428 else exit
1 ; fi
; \
1432 Makefile
: Makefile.in config.status @frags@
1433 # Regenerate the Makefile and the tm.h / nm.h links.
1434 CONFIG_FILES
="Makefile" \
1437 $(SHELL
) config.status
1439 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1440 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1441 CONFIG_COMMANDS
="depfiles" \
1444 $(SHELL
) config.status
1446 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1447 CONFIG_FILES
="data-directory/Makefile" \
1448 CONFIG_COMMANDS
="depfiles" \
1451 $(SHELL
) config.status
1455 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
1457 jit-reader.h
: $(srcdir)/jit-reader.in
1458 $(SHELL
) config.status
$@
1460 gcore
: $(srcdir)/gcore.in
1461 $(SHELL
) config.status
$@
1463 config.h
: stamp-h
; @true
1464 stamp-h
: $(srcdir)/config.in config.status
1465 CONFIG_HEADERS
=config.h
:config.in \
1466 CONFIG_COMMANDS
="default depdir" \
1469 $(SHELL
) config.status
1471 config.status
: $(srcdir)/configure configure.tgt configure.host development.sh
1472 $(SHELL
) config.status
--recheck
1475 ACLOCAL_AMFLAGS
= -I ..
/config
1477 # Keep these in sync with the includes in acinclude.m4.
1480 acx_configure_dir.m4 \
1483 ..
/config
/acinclude.m4 \
1484 ..
/config
/plugins.m4 \
1485 ..
/config
/lead-dot.m4 \
1486 ..
/config
/override.m4 \
1487 ..
/config
/largefile.m4 \
1488 ..
/config
/gettext-sister.m4 \
1489 ..
/config
/lib-ld.m4 \
1490 ..
/config
/lib-prefix.m4 \
1491 ..
/config
/lib-link.m4 \
1494 ..
/config
/depstand.m4 \
1495 ..
/config
/lcmessage.m4 \
1496 ..
/config
/codeset.m4 \
1499 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1500 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1503 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1504 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1505 cd
$(srcdir) && $(AUTOCONF
)
1507 AUTOHEADER
= autoheader
1508 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1509 cd
$(srcdir) && $(AUTOHEADER
)
1513 # automatic rebuilding in automake-generated Makefiles requires
1514 # this rule in the toplevel Makefile, which, with GNU make, causes
1515 # the desired updates through the implicit regeneration of the Makefile
1516 # and all of its prerequisites.
1523 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1525 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1527 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1529 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1531 # GDB MANUAL: TeX dvi file
1533 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1535 # GDB MANUAL: info file
1537 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1539 # Make copying.c from COPYING
1540 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1541 awk
-f
$(srcdir)/copying.awk \
1542 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1543 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1545 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
1546 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
1547 $(host_alias
) $(target_alias
) version.c
1549 observer.h
: observer.sh doc
/observer.texi
1550 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1552 observer.inc
: observer.sh doc
/observer.texi
1553 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1556 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1557 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1559 gdb.cxref
: $(SFILES
)
1560 cxref
-I.
$(SFILES
) >gdb.cxref
1564 # GNU Make has an annoying habit of putting *all* the Makefile variables
1565 # into the environment, unless you include this target as a circumvention.
1566 # Rumor is that this will be fixed (and this target can be removed)
1570 # GNU Make 3.63 has a different problem: it keeps tacking command line
1571 # overrides onto the definition of $(MAKE). This variable setting
1576 aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
1577 aarch64-linux-nat.c \
1579 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1580 alpha-tdep.c alpha-mdebug-tdep.c \
1581 alpha-linux-tdep.c alpha-osf1-tdep.c \
1582 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1583 amd64-nat.c amd64-tdep.c \
1584 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1585 amd64nbsd-nat.c amd64nbsd-tdep.c \
1586 amd64obsd-nat.c amd64obsd-tdep.c \
1587 amd64-darwin-tdep.c \
1588 amd64-dicos-tdep.c \
1589 amd64-linux-nat.c amd64-linux-tdep.c \
1591 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1592 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1594 bfin-linux-tdep.c bfin-tdep.c \
1595 bsd-uthread.c bsd-kvm.c \
1597 dcache.c dicos-tdep.c darwin-nat.c \
1602 go32-nat.c h8300-tdep.c \
1603 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1604 hppa-linux-tdep.c hppa-linux-nat.c \
1605 hppabsd-nat.c hppabsd-tdep.c \
1607 hppanbsd-nat.c hppanbsd-tdep.c \
1608 i386-tdep.c i386-linux-nat.c \
1609 i386v4-nat.c i386-cygwin-tdep.c \
1610 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1611 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1613 i386-darwin-tdep.c i386-darwin-nat.c \
1615 i386-linux-tdep.c i386-nat.c \
1616 i386-sol2-nat.c i386-sol2-tdep.c \
1617 i386gnu-nat.c i386gnu-tdep.c \
1618 ia64-hpux-nat.c ia64-hpux-tdep.c \
1619 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1620 inf-ptrace.c inf-ttrace.c \
1622 ia64-libunwind-tdep.c \
1629 m32r-linux-nat.c m32r-linux-tdep.c \
1631 m68kbsd-nat.c m68kbsd-tdep.c \
1632 m68klinux-nat.c m68klinux-tdep.c \
1633 m88k-tdep.c m88kbsd-nat.c \
1634 microblaze-tdep.c microblaze-linux-tdep.c \
1636 mips-linux-nat.c mips-linux-tdep.c \
1639 mipsnbsd-nat.c mipsnbsd-tdep.c \
1640 mips64obsd-nat.c mips64obsd-tdep.c \
1642 nios2-tdep.c nios2-linux-tdep.c \
1643 nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
1645 somread.c solib-som.c \
1647 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
1648 ppcfbsd-nat.c ppcfbsd-tdep.c \
1649 ppcnbsd-nat.c ppcnbsd-tdep.c \
1650 ppcobsd-nat.c ppcobsd-tdep.c \
1652 ravenscar-thread.c \
1653 remote-m32r-sdi.c remote-mips.c \
1657 rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
1658 rs6000-lynx178-tdep.c \
1660 s390-linux-tdep.c s390-linux-nat.c \
1662 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1663 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1665 solib-irix.c solib-svr4.c \
1666 sparc-linux-nat.c sparc-linux-tdep.c \
1667 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1668 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1669 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1670 sparc64nbsd-nat.c sparc64nbsd-tdep.c \
1671 sparc64obsd-nat.c sparc64obsd-tdep.c \
1672 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1673 sparc-ravenscar-thread.c \
1674 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1675 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1677 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1678 windows-nat.c windows-tdep.c \
1681 xtensa-tdep.c xtensa-config.c \
1682 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1684 # Some files need explicit build rules (due to -Werror problems) or due
1685 # to sub-directory fun 'n' games.
1687 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1688 # errors. It turns out that that is the least of monitor.c's
1689 # problems. The function print_vsprintf appears to be using
1690 # va_arg(long) to extract CORE_ADDR parameters - something that
1691 # definitly will not work. "monitor.c" needs to be rewritten so that
1692 # it doesn't use format strings and instead uses callbacks.
1693 monitor.o
: $(srcdir)/monitor.c
1694 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1695 $(COMPILE.post
) $(srcdir)/monitor.c
1698 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1699 # checks format strings.
1700 printcmd.o
: $(srcdir)/printcmd.c
1701 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1702 $(COMPILE.post
) $(srcdir)/printcmd.c
1705 # ada-exp.c can appear in srcdir, for releases; or in ., for
1706 # development builds.
1707 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
1709 # Some versions of flex give output that triggers
1710 # -Wold-style-definition.
1711 ada-exp.o
: ada-exp.c
1712 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
1713 $(COMPILE.post
) $(ADA_EXP_C
)
1716 # Message files. Based on code in gcc/Makefile.in.
1718 # Rules for generating translated message descriptions. Disabled by
1719 # autoconf if the tools are not available.
1721 .SUFFIXES
: .po .gmo .pox .pot
1722 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1726 # This notation should be acceptable to all Make implementations used
1727 # by people who are interested in updating .po files.
1728 update-po
: $(CATALOGS
:.gmo
=.pox
)
1730 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1733 -test -d po || mkdir po
1734 $(GMSGFMT
) --statistics
-o
$@
$<
1736 # The new .po has to be gone over by hand, so we deposit it into
1737 # build/po with a different extension. If build/po/$(PACKAGE).pot
1738 # exists, use it (it was just created), else use the one in srcdir.
1740 -test -d po || mkdir po
1741 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1742 then echo po/$(PACKAGE).pot; \
1743 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1745 # This rule has to look for .gmo modules in both srcdir and the cwd,
1746 # and has to check that we actually have a catalog for each language,
1747 # in case they weren't built or included with the distribution.
1749 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1750 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1751 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1752 if
[ -f
$$cat ]; then
:; \
1753 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1756 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1757 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1758 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1759 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1760 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1763 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1764 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1765 if
[ -f
$$cat ]; then
:; \
1766 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1769 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1770 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1772 # Delete po/*.gmo only if we are not building in the source directory.
1774 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1776 # Rule for regenerating the message template (gdb.pot). Instead of
1777 # forcing everyone to edit POTFILES.in, which proved impractical, this
1778 # rule has no dependencies and always regenerates gdb.pot. This is
1779 # relatively harmless since the .po files do not directly depend on
1780 # it. The .pot file is left in the build directory. Since GDB's
1781 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1782 # files) force this rule.
1783 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1784 po
/$(PACKAGE
).pot
: force
1785 -test -d po || mkdir po
1786 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1790 # YACC/LEX dependencies
1792 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1793 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1794 # said LANG-exp.c rather than ./c-exp.c some makes would
1795 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1796 # decls for malloc/realloc/free which conflict with everything else.
1797 # Strictly speaking c-exp.c should therefore depend on
1798 # Makefile.in, but that was a pretty big annoyance.
1803 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1804 ||
(rm -f
$@
; false
)
1805 sed
-e
'/extern.*malloc/d' \
1806 -e
'/extern.*realloc/d' \
1807 -e
'/extern.*free/d' \
1808 -e
'/include.*malloc.h/d' \
1809 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1810 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1811 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1812 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1813 -e
'/^#line.*y.tab.c/d' \
1814 -e
"s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
1818 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1819 $(FLEX
) -o
$@
$< && \
1821 sed
-e
'/extern.*malloc/d' \
1822 -e
'/extern.*realloc/d' \
1823 -e
'/extern.*free/d' \
1824 -e
'/include.*malloc.h/d' \
1825 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1826 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1827 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1828 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1829 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1833 elif
[ -f
$@
]; then \
1834 echo
"Warning: $*.c older than $*.l and flex not available."; \
1836 echo
"$@ missing and flex not available."; \
1840 .PRECIOUS
: ada-lex.c
1844 xml-builtin.c
: stamp-xml
; @true
1845 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1846 rm -f xml-builtin.tmp
1848 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1849 xml-builtin.tmp
$(XMLFILES
)
1850 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1851 echo stamp
> stamp-xml
1853 .PRECIOUS
: xml-builtin.c
1856 # gdb/cli/ dependencies
1858 # Need to explicitly specify the compile rule as make will do nothing
1859 # or try to compile the object file into the sub-directory.
1861 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1862 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1865 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1866 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1869 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1870 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1873 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1874 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1877 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1878 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1881 cli-script.o
: $(srcdir)/cli
/cli-script.c
1882 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1885 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1886 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1889 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1890 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1895 # GDBTK sub-directory
1897 # Need to explicitly specify the compile rule as make will do nothing
1898 # or try to compile the object file into the mi directory.
1900 all-gdbtk
: insight
$(EXEEXT
)
1903 transformed_name
=`t='$(program_transform_name)'; \
1904 echo insight | sed -e $$t` ; \
1905 if
test "x$$transformed_name" = x
; then \
1906 transformed_name
=insight
; \
1910 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1911 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1912 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1913 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1914 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1915 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1916 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1917 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1918 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1919 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1920 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1921 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1922 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1923 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1924 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1925 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1926 cd
$(srcdir)/gdbtk
/library
; \
1927 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1929 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1933 transformed_name
=`t='$(program_transform_name)'; \
1934 echo insight | sed -e $$t` ; \
1935 if
test "x$$transformed_name" = x
; then \
1936 transformed_name
=insight
; \
1940 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1941 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1944 rm -f insight
$(EXEEXT
)
1946 # Removing the old gdb first works better if it is running, at least on SunOS.
1947 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1948 $(CDEPS
) $(TDEPLIBS
)
1949 rm -f insight
$(EXEEXT
)
1950 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1951 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1952 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1954 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1955 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1957 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1958 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1960 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1961 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1963 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1964 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1967 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1968 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1971 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1972 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1975 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1976 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1979 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1980 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1983 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1984 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1987 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1988 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1991 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1992 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1995 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1996 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1999 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2000 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2005 # gdb/mi/ dependencies
2007 # Need to explicitly specify the compile rule as make will do nothing
2008 # or try to compile the object file into the sub-directory.
2010 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
2011 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
2014 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
2015 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
2018 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
2019 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
2022 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
2023 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
2026 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
2027 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
2030 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
2031 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
2034 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
2035 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
2038 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
2039 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
2042 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
2043 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
2046 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
2047 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
2050 mi-console.o
: $(srcdir)/mi
/mi-console.c
2051 $(COMPILE
) $(srcdir)/mi
/mi-console.c
2054 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
2055 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
2058 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
2059 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
2062 mi-main.o
: $(srcdir)/mi
/mi-main.c
2063 $(COMPILE
) $(srcdir)/mi
/mi-main.c
2066 mi-out.o
: $(srcdir)/mi
/mi-out.c
2067 $(COMPILE
) $(srcdir)/mi
/mi-out.c
2070 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
2071 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
2074 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
2075 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
2078 mi-common.o
: $(srcdir)/mi
/mi-common.c
2079 $(COMPILE
) $(srcdir)/mi
/mi-common.c
2082 # gdb/common/ dependencies
2084 # Need to explicitly specify the compile rule as make will do nothing
2085 # or try to compile the object file into the sub-directory.
2087 signals.o
: $(srcdir)/common
/signals.c
2088 $(COMPILE
) $(srcdir)/common
/signals.c
2091 common-utils.o
: ${srcdir}/common
/common-utils.c
2092 $(COMPILE
) $(srcdir)/common
/common-utils.c
2095 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
2096 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
2099 xml-utils.o
: ${srcdir}/common
/xml-utils.c
2100 $(COMPILE
) $(srcdir)/common
/xml-utils.c
2103 ptid.o
: ${srcdir}/common
/ptid.c
2104 $(COMPILE
) $(srcdir)/common
/ptid.c
2107 buffer.o
: ${srcdir}/common
/buffer.c
2108 $(COMPILE
) $(srcdir)/common
/buffer.c
2111 filestuff.o
: $(srcdir)/common
/filestuff.c
2112 $(COMPILE
) $(srcdir)/common
/filestuff.c
2115 format.o
: ${srcdir}/common
/format.c
2116 $(COMPILE
) $(srcdir)/common
/format.c
2119 linux-osdata.o
: ${srcdir}/common
/linux-osdata.c
2120 $(COMPILE
) $(srcdir)/common
/linux-osdata.c
2123 linux-procfs.o
: $(srcdir)/common
/linux-procfs.c
2124 $(COMPILE
) $(srcdir)/common
/linux-procfs.c
2127 linux-ptrace.o
: $(srcdir)/common
/linux-ptrace.c
2128 $(COMPILE
) $(srcdir)/common
/linux-ptrace.c
2131 common-agent.o
: $(srcdir)/common
/agent.c
2132 $(COMPILE
) $(srcdir)/common
/agent.c
2135 vec.o
: ${srcdir}/common
/vec.c
2136 $(COMPILE
) $(srcdir)/common
/vec.c
2139 linux-btrace.o
: ${srcdir}/common
/linux-btrace.c
2140 $(COMPILE
) $(srcdir)/common
/linux-btrace.c
2143 mips-linux-watch.o
: ${srcdir}/common
/mips-linux-watch.c
2144 $(COMPILE
) $(srcdir)/common
/mips-linux-watch.c
2147 print-utils.o
: ${srcdir}/common
/print-utils.c
2148 $(COMPILE
) $(srcdir)/common
/print-utils.c
2151 rsp-low.o
: ${srcdir}/common
/rsp-low.c
2152 $(COMPILE
) $(srcdir)/common
/rsp-low.c
2156 # gdb/target/ dependencies
2158 # Need to explicitly specify the compile rule as make will do nothing
2159 # or try to compile the object file into the sub-directory.
2161 waitstatus.o
: ${srcdir}/target
/waitstatus.c
2162 $(COMPILE
) $(srcdir)/target
/waitstatus.c
2165 # gdb/nat/ dependencies
2167 # Need to explicitly specify the compile rule as make will do nothing
2168 # or try to compile the object file into the sub-directory.
2170 linux-waitpid.o
: ${srcdir}/nat
/linux-waitpid.c
2171 $(COMPILE
) $(srcdir)/nat
/linux-waitpid.c
2175 # gdb/tui/ dependencies
2177 # Need to explicitly specify the compile rule as make will do nothing
2178 # or try to compile the object file into the sub-directory.
2180 tui.o
: $(srcdir)/tui
/tui.c
2181 $(COMPILE
) $(srcdir)/tui
/tui.c
2184 tui-command.o
: $(srcdir)/tui
/tui-command.c
2185 $(COMPILE
) $(srcdir)/tui
/tui-command.c
2188 tui-data.o
: $(srcdir)/tui
/tui-data.c
2189 $(COMPILE
) $(srcdir)/tui
/tui-data.c
2192 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
2193 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
2196 tui-file.o
: $(srcdir)/tui
/tui-file.c
2197 $(COMPILE
) $(srcdir)/tui
/tui-file.c
2200 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
2201 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
2204 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
2205 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
2208 tui-io.o
: $(srcdir)/tui
/tui-io.c
2209 $(COMPILE
) $(srcdir)/tui
/tui-io.c
2212 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
2213 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
2216 tui-out.o
: $(srcdir)/tui
/tui-out.c
2217 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2220 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2221 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2224 tui-source.o
: $(srcdir)/tui
/tui-source.c
2225 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2228 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2229 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2232 tui-win.o
: $(srcdir)/tui
/tui-win.c
2233 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2236 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2237 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2240 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2241 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2244 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2245 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2248 # gdb/guile dependencies
2250 # Need to explicitly specify the compile rule as make will do nothing
2251 # or try to compile the object file into the sub-directory.
2253 guile.o
: $(srcdir)/guile
/guile.c
2254 $(COMPILE
) $(srcdir)/guile
/guile.c
2257 scm-arch.o
: $(srcdir)/guile
/scm-arch.c
2258 $(COMPILE
) $(srcdir)/guile
/scm-arch.c
2261 scm-auto-load.o
: $(srcdir)/guile
/scm-auto-load.c
2262 $(COMPILE
) $(srcdir)/guile
/scm-auto-load.c
2265 scm-block.o
: $(srcdir)/guile
/scm-block.c
2266 $(COMPILE
) $(srcdir)/guile
/scm-block.c
2269 scm-breakpoint.o
: $(srcdir)/guile
/scm-breakpoint.c
2270 $(COMPILE
) $(srcdir)/guile
/scm-breakpoint.c
2273 scm-disasm.o
: $(srcdir)/guile
/scm-disasm.c
2274 $(COMPILE
) $(srcdir)/guile
/scm-disasm.c
2277 scm-exception.o
: $(srcdir)/guile
/scm-exception.c
2278 $(COMPILE
) $(srcdir)/guile
/scm-exception.c
2281 scm-frame.o
: $(srcdir)/guile
/scm-frame.c
2282 $(COMPILE
) $(srcdir)/guile
/scm-frame.c
2285 scm-gsmob.o
: $(srcdir)/guile
/scm-gsmob.c
2286 $(COMPILE
) $(srcdir)/guile
/scm-gsmob.c
2289 scm-iterator.o
: $(srcdir)/guile
/scm-iterator.c
2290 $(COMPILE
) $(srcdir)/guile
/scm-iterator.c
2293 scm-lazy-string.o
: $(srcdir)/guile
/scm-lazy-string.c
2294 $(COMPILE
) $(srcdir)/guile
/scm-lazy-string.c
2297 scm-math.o
: $(srcdir)/guile
/scm-math.c
2298 $(COMPILE
) $(srcdir)/guile
/scm-math.c
2301 scm-objfile.o
: $(srcdir)/guile
/scm-objfile.c
2302 $(COMPILE
) $(srcdir)/guile
/scm-objfile.c
2305 scm-ports.o
: $(srcdir)/guile
/scm-ports.c
2306 $(COMPILE
) $(srcdir)/guile
/scm-ports.c
2309 scm-pretty-print.o
: $(srcdir)/guile
/scm-pretty-print.c
2310 $(COMPILE
) $(srcdir)/guile
/scm-pretty-print.c
2313 scm-safe-call.o
: $(srcdir)/guile
/scm-safe-call.c
2314 $(COMPILE
) $(srcdir)/guile
/scm-safe-call.c
2317 scm-string.o
: $(srcdir)/guile
/scm-string.c
2318 $(COMPILE
) $(srcdir)/guile
/scm-string.c
2321 scm-symbol.o
: $(srcdir)/guile
/scm-symbol.c
2322 $(COMPILE
) $(srcdir)/guile
/scm-symbol.c
2325 scm-symtab.o
: $(srcdir)/guile
/scm-symtab.c
2326 $(COMPILE
) $(srcdir)/guile
/scm-symtab.c
2329 scm-type.o
: $(srcdir)/guile
/scm-type.c
2330 $(COMPILE
) $(srcdir)/guile
/scm-type.c
2333 scm-utils.o
: $(srcdir)/guile
/scm-utils.c
2334 $(COMPILE
) $(srcdir)/guile
/scm-utils.c
2337 scm-value.o
: $(srcdir)/guile
/scm-value.c
2338 $(COMPILE
) $(srcdir)/guile
/scm-value.c
2341 # gdb/python/ dependencies
2343 # Need to explicitly specify the compile rule as make will do nothing
2344 # or try to compile the object file into the sub-directory.
2346 # Flags needed to compile Python code
2347 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2349 python.o
: $(srcdir)/python
/python.c
2350 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2353 py-arch.o
: $(srcdir)/python
/py-arch.c
2354 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-arch.c
2357 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2358 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2361 py-block.o
: $(srcdir)/python
/py-block.c
2362 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2365 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2366 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2369 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2370 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2373 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2374 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2377 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2378 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2381 py-event.o
: $(srcdir)/python
/py-event.c
2382 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2385 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2386 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2389 py-evts.o
: $(srcdir)/python
/py-evts.c
2390 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2393 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2394 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2397 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2398 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2401 py-frame.o
: $(srcdir)/python
/py-frame.c
2402 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2405 py-framefilter.o
: $(srcdir)/python
/py-framefilter.c
2406 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-framefilter.c
2409 py-function.o
: $(srcdir)/python
/py-function.c
2410 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2413 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2414 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2417 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2418 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2421 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2422 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2425 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2426 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2429 py-linetable.o
: $(srcdir)/python
/py-linetable.c
2430 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-linetable.c
2433 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2434 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2437 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2438 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2441 py-param.o
: $(srcdir)/python
/py-param.c
2442 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2445 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2446 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2449 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2450 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2453 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2454 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2457 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2458 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2461 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2462 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2465 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2466 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2469 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2470 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2473 py-type.o
: $(srcdir)/python
/py-type.c
2474 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2477 py-utils.o
: $(srcdir)/python
/py-utils.c
2478 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2481 py-value.o
: $(srcdir)/python
/py-value.c
2482 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2486 # Dependency tracking. Most of this is conditional on GNU Make being
2487 # found by configure; if GNU Make is not found, we fall back to a
2491 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2492 # Note that we put the dependencies into a .Tpo file, then move them
2493 # into place if the compile succeeds. We need this because gcc does
2494 # not atomically write the dependency output file.
2495 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2496 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2497 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2498 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2500 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2501 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2502 # depcomp handles atomicity for us, so we don't need a postcompile
2504 @GMAKE_TRUE@
override POSTCOMPILE
=
2507 # A list of all the objects we might care about in this build, for
2508 # dependency tracking.
2509 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2510 test-cp-name-parser.o
2512 # Ensure that generated files are created early. Use order-only
2513 # dependencies if available. They require GNU make 3.80 or newer,
2514 # and the .VARIABLES variable was introduced at the same time.
2515 @GMAKE_TRUE@
ifdef .VARIABLES
2516 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2518 $(all_object_files
) : $(generated_files
)
2522 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2524 ### end of the gdb Makefile.in.