1 #Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
26 datadir = $(prefix)/lib
27 mandir = $(prefix)/man
28 man1dir = $(mandir)/man1
29 man2dir = $(mandir)/man2
30 man3dir = $(mandir)/man3
31 man4dir = $(mandir)/man4
32 man5dir = $(mandir)/man5
33 man6dir = $(mandir)/man6
34 man7dir = $(mandir)/man7
35 man8dir = $(mandir)/man8
36 man9dir = $(mandir)/man9
37 infodir = $(prefix)/info
38 includedir = $(prefix)/include
39 docdir
= $(datadir)/doc
44 INSTALL_PROGRAM
= $(INSTALL
)
45 INSTALL_DATA
= $(INSTALL
)
51 # Flags that describe where you can find the termcap library.
52 # This can be overridden in the host Makefile fragment file.
55 # System V: If you compile gdb with a compiler which uses the coff
56 # encapsulation feature (this is a function of the compiler used, NOT
57 # of the m-?.h file selected by config.gdb), you must make sure that
58 # the GNU nm is the one that is used by munch.
60 # If you are compiling with GCC, make sure that either 1) You use the
61 # -traditional flag, or 2) You have the fixed include files where GCC
62 # can reach them. Otherwise the ioctl calls in inflow.c
63 # will be incorrectly compiled. The "fixincludes" script in the gcc
64 # distribution will fix your include files up.
69 # Directory containing source files. Don't clean up the spacing,
70 # this exact string is matched for by the "configure" script.
73 # It is also possible that you will need to add -I/usr/include/sys to the
74 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
75 # is where it should be according to Posix).
79 YACC
=$(BISON
) $(BISONFLAGS
)
83 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
84 # Berkeley/Sun don't have quite enough.
88 # where to find texinfo; GDB dist should include a recent one
89 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
91 # where to find makeinfo, preferably one designed for texinfo-2
94 # Set this up with gcc if you have gnu ld and the loader will print out
95 # line numbers for undefinded refs.
99 # Where is the "include" directory? Traditionally ../include or ./include
100 INCLUDE_DIR
= ${srcdir}/..
/include
101 INCLUDE_DEP
= $$(INCLUDE_DIR
)
103 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
104 # or ./mmalloc (When we want the binary library built from it, we use
105 # ${MMALLOC_DIR}${subdir}.)
106 # Note that mmalloc can still be used on systems without mmap().
107 # To use your system malloc, comment out the following defines.
108 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
109 MMALLOC_DEP
= $$(MMALLOC_DIR
)
110 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
111 # To use your system malloc, uncomment MMALLOC_DISABLE.
112 #MMALLOC_DISABLE = -DNO_MMALLOC
113 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
114 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
115 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
117 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
118 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
119 BFD_DIR
= ${srcdir}/..
/bfd
120 BFD_DEP
= $$(BFD_DIR
)
121 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
123 # Where is the source dir for the READLINE library? Traditionally in .. or .
124 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
125 READLINE_DIR
= ${srcdir}/..
/readline
126 READLINE_DEP
= $$(READLINE_DIR
)
127 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
129 # All the includes used for CFLAGS and for lint.
130 # -I. for config files.
131 # -I${srcdir} possibly for regex.h also.
132 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
) -I
$(READLINE_DIR
) -I
${srcdir}/vx-share
134 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
137 GLOBAL_CFLAGS
= ${MINUS_G} ${TM_CFLAGS} ${XM_CFLAGS}
138 #PROFILE_CFLAGS = -pg
140 # CFLAGS is the aggregate of several individual *_CFLAGS macros.
141 # USER_CFLAGS is specifically reserved for setting from the command line
142 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
143 CFLAGS
= ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
144 # None of the things in CFLAGS will do any harm, and on some systems
145 # (e.g. SunOS4) it is important to use the M_CFLAGS.
148 # Where is the "-liberty" library, containing getopt and obstack?
149 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
150 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
152 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
153 # If your sysyem is missing alloca(), or, more likely, it's there but
154 # it doesn't work, define ALLOCA & ALLOCA1 too.
155 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
157 # Libraries and corresponding dependencies for compiling gdb.
158 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
159 # TERMCAP comes after readline, since readline depends on it.
160 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
161 ${XM_CLIBS} ${TM_CLIBS}
162 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
163 ${RL_LIB} ${MMALLOC_LIB}
165 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
166 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
172 LINTFLAGS
= -I
${BFD_DIR}
174 # Host and target-dependent makefile fragments come in here.
176 # End of host and target-dependent makefile fragments
178 # Source files in the main directory.
179 # Files which are included via a config/* Makefile fragment
180 # should *not* be specified here; they're in "ALLDEPFILES".
182 blockframe.c breakpoint.c command.c core.c \
183 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
184 main.c printcmd.c gdbtypes.c \
185 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
186 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
187 signame.c cplus-dem.c mem-break.c target.c inftarg.c \
188 dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
189 ieee-float.c language.c parse.c buildsym.c objfiles.c \
192 # Source files in subdirectories (which will be handled separately by
194 # Files which are included via a config/* Makefile fragment
195 # should *not* be specified here; they're in "ALLDEPFILES".
197 ${srcdir}/vx-share
/dbgRpcLib.h \
198 ${srcdir}/vx-share
/ptrace.h \
199 ${srcdir}/vx-share
/reg.h \
200 ${srcdir}/vx-share
/vxTypes.h \
201 ${srcdir}/vx-share
/vxWorks.h \
202 ${srcdir}/vx-share
/wait.h \
203 ${srcdir}/vx-share
/xdr_ld.h \
204 ${srcdir}/vx-share
/xdr_ptrace.h \
205 ${srcdir}/vx-share
/xdr_rdb.h \
206 ${srcdir}/vx-share
/xdr_regs.h \
207 ${srcdir}/nindy-share
/b.out.h \
208 ${srcdir}/nindy-share
/block_io.h \
209 ${srcdir}/nindy-share
/coff.h \
210 ${srcdir}/nindy-share
/demux.h \
211 ${srcdir}/nindy-share
/env.h \
212 ${srcdir}/nindy-share
/stop.h \
213 ${srcdir}/nindy-share
/ttycntl.h
215 # Non-source files in subdirs, that should go into gdb.tar.Z.
217 ${srcdir}/nindy-share
/Makefile \
218 ${srcdir}/nindy-share
/VERSION
220 # All source files that go into linking GDB, except config-specified files.
221 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
223 # All source files that lint should look at
224 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
226 # Any additional files specified on these lines should also be added to
227 # the OTHERS = definition below, so they go in the tar files.
228 SFILES_STAND
= $(SFILES
) standalone.c
229 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
231 # Header files that are not named in config/* Makefile fragments go here.
232 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h environ.h \
233 expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
234 ieee-float.h inferior.h minimon.h objfiles.h partial-stab.h \
235 signals.h signame.h symfile.h symtab.h solib.h \
236 target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \
237 xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h
239 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
241 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
242 POSSLIBS
= $(POSSLIBS_MAINDIR
)
244 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
246 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
247 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
248 README TODO TAGS WHATS.NEW Projects \
249 .gdbinit COPYING
$(YYFILES
) \
250 copying.c Convex.notes copying.awk \
251 saber.suppress standalone.c stuff.c kdb-start.c \
254 # Subdirectories of gdb, which should be included in their entirety in
256 TARDIRS
= doc
# tests
258 # GDB "info" files, which should be included in their entirety
259 INFOFILES
= gdb.
info*
261 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
263 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
264 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
265 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
266 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
267 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
269 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
270 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
271 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
272 command.o utils.o expprint.o environ.o version.o gdbtypes.o \
273 copying.o
$(DEPFILES
) signame.o cplus-dem.o mem-break.o target.o \
274 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
275 buildsym.o objfiles.o minsyms.o \
276 dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o
# mipsread.o
278 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
280 TSOBS
= core.o inflow.o
282 NTSOBS
= standalone.o
284 TSSTART
= /lib
/crt0.o
286 NTSSTART
= kdb-start.o
290 # For now, shortcut the "configure GDB for fewer languages" stuff.
291 YYFILES
= c-exp.tab.c m2-exp.tab.c
292 YYOBJ
= c-exp.tab.o m2-exp.tab.o
294 # Prevent Sun make from putting in the machine type. Setting
295 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
297 ${CC} -c
${CFLAGS} $<
300 $(MAKE
) subdir_do DO
=all "DODIRS=$(SUBDIRS)"
303 $(MAKE
) subdir_do DO
=info "DODIRS=$(SUBDIRS)" "MAKEINFO=$(MAKEINFO)"
305 $(MAKE
) subdir_do DO
=install-info
"DODIRS=$(SUBDIRS)"
307 $(MAKE
) subdir_do DO
=clean-info
"DODIRS=$(SUBDIRS)"
310 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
311 pack gdb.t
; rm -f gdb.t
315 $(INSTALL_PROGRAM
) gdb
$(bindir)/$(program_prefix
)gdb
316 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$(program_prefix
)gdb
.1
318 $(MAKE
) subdir_do DO
=install "DODIRS=$(SUBDIRS)"
320 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
321 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
323 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
324 ${CC-LD
} $(LDFLAGS
) -o gdb init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) \
325 $(CLIBS
) $(LOADLIBES
)
327 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
328 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
329 #load ./init.c $(SFILES)
330 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
331 #unload ${srcdir}/nindy-share/[A-Z]*
332 #load c-exp.tab.c m2-exp.tab.c
333 #load copying.c version.c
334 #load ../libiberty/libiberty.a
335 #load ../bfd/libbfd.a
336 #load ../readline/libreadline.a
337 #load ../mmalloc/libmmalloc.a
339 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
340 echo
"Load .c corresponding to:" $(DEPFILES
)
343 # This is useful when debugging GDB, because some Unix's don't let you run GDB
344 # on itself without copying the executable. So "make gdb1" will make
345 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
346 # Removing gdb1 before the copy is the right thing if gdb1 is open
347 # in another process.
352 # This is a remote stub which runs under unix and starts up an
353 # inferior process. This is at least useful for debugging GDB's
357 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
358 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
360 # Support for building Makefile out of configured pieces, automatically
361 # generated dependencies, etc. alldeps.mak is a file that contains
362 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
363 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
364 # contents of the config subdirectory.
366 alldeps.mak
: ${srcdir}/config
367 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
368 for i in
`ls -d ${srcdir}/config/m[ht]-*` ; do \
369 echo
$$i >>allconfig.tmp
; \
371 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
372 for (i = 2; i <= NF; i++) \
373 print $$i >> "alldeps.tmp" ; \
375 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
376 print $$2 >> "allparam.tmp" }' ; \
378 sort <alldeps.tmp | uniq | \
379 sed
-e
's/arm-convert.o/arm-convert.s/' \
380 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
381 -e
's!^nindy.o!nindy-share/nindy.c!' \
382 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
383 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
384 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
385 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
386 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
387 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
390 echo
'# Start of "alldeps.mak" definitions' \
392 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
394 grep
-v
/ alldeps2.tmp | \
395 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
396 NR == 0 {printf $$0;} \
397 NR != 0 {printf "\\\n" $$0} \
398 END {printf "\n\n"}' >>alldeps.mak
;
399 grep
/ alldeps2.tmp | \
400 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
401 NR == 0 {printf $$0;} \
402 NR != 0 {printf "\\\n" $$0} \
403 END {printf "\n\n"}' >>alldeps.mak
;
404 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
405 NR == 0 {printf $$0;} \
406 NR != 0 {printf "\\\n" $$0} \
407 END {printf "\n\n"}' >>alldeps.mak
;
408 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
409 NR == 0 {printf $$0;} \
410 NR != 0 {printf "\\\n" $$0} \
411 END {printf "\n\n"}' >>alldeps.mak
;
412 echo
'# End of "alldeps.mak" definitions' \
414 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
416 # The sed script makes everything which depends on {x,t}m.h depend on
417 # config.status as well, in case someone reconfigures gdb out from
418 # under an already compiled gdb.
419 depend
: $(SOURCES
) Makefile.in
420 @echo Ignore errors about non-existent system-supplied
include files
421 @echo for systems other than the one you are using.
422 @echo
"If xm.h and tm.h don't exist, the error messages saying so"
423 @echo can safely be ignored.
424 @echo Also ignore parse errors in valops.c
, and any errors in
426 -$(GCC
) -MM
$(CFLAGS
) -I
$(BFD_DIR
) \
427 `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
428 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
429 # for xm.h and tm.h. This allows the same "depend" file to be used
430 # by the various subdirectories.
431 if
[ "${srcdir}" = "." ] ; then \
433 -e
's; ./xm.h; xm.h;g' \
434 -e
's; ./tm.h; tm.h;g' \
435 -e
's; \./; $${srcdir}/;g' \
436 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
437 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
440 mv depend.tm2 depend.tmp
; \
443 -e
's; [xt]m.h;& config.status;g' \
444 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
445 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
446 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
447 -e
's; ./xm.h; xm.h config.status;g' \
448 -e
's; ./tm.h; tm.h config.status;g' \
453 @echo
"You must configure gdb. Look at the README file for details."
456 # These are not generated by "make depend" because they only are there
458 # But these rules don't do what we want; we want to hack the foo.o: tm.h
459 # dependency to do the right thing.
460 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
461 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
462 xm-news1000.h
: xm-news.h
463 xm-i386-sv32.h
: xm-i386.h
464 tm-i386gas.h
: tm-i386.h
465 xm-sun4os4.h
: xm-sparc.h
466 tm-sun4os4.h
: tm-sparc.h
468 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
470 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
471 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
472 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
475 # Put the proper machine-specific files first.
476 # createtags will edit the .o in DEPFILES into .c
478 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
481 # Making distributions of GDB and friends.
483 # Make a directory `proto-gdb.dir' that contains an image of the GDB
484 # directory of the distribution, built up with symlinks.
485 make-proto-gdb.
dir: force_update
486 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
487 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
489 # Make a tar file containing the GDB directory of the distribution.
490 gdb.
tar.Z
: force_update
491 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
492 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
494 # Set up the GDB directory for distribution, by building all files that
495 # are products of other files.
496 setup-to-dist
: force_update
499 $(MAKE
) $(MFLAGS
) alldeps.mak
502 $(MAKE
) $(MFLAGS
) depend
504 (cd doc
; $(MAKE
) $(MFLAGS
) gdbVN.m4
)
505 $(MAKE
) $(MFLAGS
) gdb.
info
506 $(MAKE
) $(MFLAGS
) refcard.ps
508 # Build a tar file from a proto-gdb.dir.
509 gdb-
$(VERSION
).
tar.Z
: force_update
510 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
511 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
512 ln
-s proto-gdb.
dir $(DIST
)
513 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
514 rm -rf
$(DIST
) proto-gdb.
dir
516 # Build a proto-gdb.dir after GDB has been set up for distribution.
517 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
518 # built in the setup-to-dist process, since it defines things like ALLCONFIG
519 # and ALLDEPFILES, that we need.
520 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
523 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
524 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
525 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
526 (mkdir
$$i; cd
$$i; \
527 ln
-s ..
/..
/$$i/* .
; \
528 rm -rf SCCS CVS.adm RCS config.status
); done
529 mkdir proto-gdb.
dir/config
530 cd proto-gdb.
dir/config
; \
531 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
532 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
533 cd proto-gdb.
dir/config
; \
534 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
535 do ln
-s ..
/..
/$$i ..
/$$i ; done
536 chmod og
=u
`find . -print`
539 rm -f
*.o
${ADD_FILES}
540 rm -f init.c version.c
541 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
543 $(MAKE
) subdir_do DO
=clean "DODIRS=$(SUBDIRS)"
545 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
546 rm -f tm.h xm.h config.status
547 rm -f y.output
yacc.acts
yacc.tmp
548 rm -f
${TESTS} Makefile depend
549 $(MAKE
) subdir_do DO
=distclean "DODIRS=$(SUBDIRS)"
552 rm -f c-exp.tab.c m2-exp.tab.c TAGS
553 rm -f tm.h xm.h config.status
554 rm -f Makefile depend
555 $(MAKE
) subdir_do DO
=realclean "DODIRS=$(SUBDIRS)"
557 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
560 for i in
$(DODIRS
); do \
561 if
[ -d .
/$$i ] ; then \
564 "against=$(against)" \
566 "AR_FLAGS=$(AR_FLAGS)" \
569 "MAKEINFO=$(MAKEINFO)" \
570 "BISON=$(BISON)" $(DO
)) ; then true
; \
575 # Copy the object files from a particular stage into a subdirectory.
578 -mv
-f
$(STAGESTUFF
) stage1
579 $(MAKE
) subdir_do DO
=stage1
"DODIRS=$(SUBDIRS)"
583 -mv
-f
$(STAGESTUFF
) stage2
584 $(MAKE
) subdir_do DO
=stage2
"DODIRS=$(SUBDIRS)"
588 -mv
-f
$(STAGESTUFF
) stage3
589 $(MAKE
) subdir_do DO
=stage3
"DODIRS=$(SUBDIRS)"
594 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
595 $(MAKE
) subdir_do DO
=comparison
"DODIRS=$(SUBDIRS)"
598 -(cd stage1
; mv
-f
* ..
)
600 $(MAKE
) subdir_do DO
=de-stage1
"DODIRS=$(SUBDIRS)"
603 -(cd stage2
; mv
-f
* ..
)
605 $(MAKE
) subdir_do DO
=de-stage2
"DODIRS=$(SUBDIRS)"
608 -(cd stage3
; mv
-f
* ..
)
610 $(MAKE
) subdir_do DO
=de-stage3
"DODIRS=$(SUBDIRS)"
612 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
613 $(SHELL
) .
/config.status
618 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
619 refcard.
dvi: $(srcdir)/doc
/refcard.
tex
620 ( cd .
/doc
; $(MAKE
) refcard.
dvi )
621 mv .
/doc
/refcard.
dvi .
623 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
624 refcard.ps
: $(srcdir)/doc
/refcard.
tex
625 ( cd .
/doc
; $(MAKE
) refcard.ps
)
626 mv .
/doc
/refcard.ps .
628 # GDB MANUAL: TeX dvi file
629 gdb.
dvi: .
/doc
/gdb-all.texi
630 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi )
633 # GDB MANUAL: info file
634 gdb.
info: .
/doc
/gdb-all.texi
635 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
info )
639 (cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
)
641 # Make copying.c from COPYING
642 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
643 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
645 version.c
: Makefile.in
646 echo
'char *version = "$(VERSION)";' >version.c
648 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
649 # in srcdir, then compiled in target dir to c-exp.tab.o.
650 c-exp.tab.o
: c-exp.tab.c
651 c-exp.tab.c
: $(srcdir)/c-exp.y
652 @echo
'Expect 4 shift/reduce conflicts.'
653 ${YACC} $(srcdir)/c-exp.y
654 -mv y.tab.c c-exp.tab.c
656 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
657 # in srcdir, then compiled in target dir to m2-exp.tab.o.
658 m2-exp.tab.o
: m2-exp.tab.c
659 m2-exp.tab.c
: $(srcdir)/m2-exp.y
660 ${YACC} $(srcdir)/m2-exp.y
661 -mv y.tab.c m2-exp.tab.c
663 # The symbol-file readers have dependencies on BFD header files.
664 dbxread.o
: ${srcdir}/dbxread.c
665 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
667 coffread.o
: ${srcdir}/coffread.c
668 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
670 mipsread.o
: ${srcdir}/mipsread.c
671 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
673 elfread.o
: ${srcdir}/elfread.c
674 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
676 dwarfread.o
: ${srcdir}/dwarfread.c
677 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
679 xcoffread.o
: ${srcdir}/xcoffread.c
680 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
682 xcoffexec.o
: ${srcdir}/xcoffexec.c
683 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
685 # Drag in the files that are in another directory.
687 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
688 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
690 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
691 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
693 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
694 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
696 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
697 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
699 nindy.o
: ${srcdir}/nindy-share
/nindy.c
700 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/nindy.c
702 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
703 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/Onindy.c
705 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
706 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
708 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
709 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
712 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
713 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
716 cxref -I. $(SFILES) >gdb.cxref
720 # When used with GDB, the demangler should never look for leading
721 # underscores because GDB strips them off during symbol read-in. Thus
724 cplus-dem.o: cplus-dem.c
725 ${CC} -c ${CFLAGS} -Dnounderscore \
726 `echo
${srcdir}/cplus-dem.c | sed
's,^\./,,'`
728 # GNU Make has an annoying habit of putting *all* the Makefile variables
729 # into the environment, unless you include this target as a circumvention.
730 # Rumor is that this will be fixed (and this target can be removed)
734 # This is the end of "Makefile.in". When built into "Makefile"
735 # by the configure script, two things are added below this point:
736 # alldeps.mak -- defintions of all files that are used in
737 # host- or target-dependent configurations
738 # depend -- what .o files depend on what .c and .h files,
739 # for all configurations.