1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
3 # Free Software Foundation, Inc.
5 # This file is part of GDB.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 3 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program. If not, see <http://www.gnu.org/licenses/>.
21 exec_prefix = @
exec_prefix@
23 host_alias
= @host_alias@
24 target_alias
= @target_alias@
25 program_transform_name
= @program_transform_name@
28 tooldir
= $(libdir)/$(target_alias
)
31 localedir
= @localedir@
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
43 datarootdir
= @datarootdir@
47 includedir = @
includedir@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_DATA
= @INSTALL_DATA@
79 # If you are compiling with GCC, make sure that either 1) You have the
80 # fixed include files where GCC can reach them, or 2) You use the
81 # -traditional flag. Otherwise the ioctl calls in inflow.c
82 # will be incorrectly compiled. The "fixincludes" script in the gcc
83 # distribution will fix your include files up.
86 # Dependency tracking information.
89 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
91 # Note that these are overridden by GNU make-specific code below if
92 # GNU make is used. The overrides implement dependency tracking.
94 COMPILE.post
= -c
-o
$@
95 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
98 # Directory containing source files.
104 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
105 # not defined, but ada-lex.c is present, compilation will continue,
106 # possibly with a warning.
109 YLWRAP
= $(srcdir)/..
/ylwrap
111 # where to find makeinfo, preferably one designed for texinfo-2
114 MAKEHTML
= $(MAKEINFO
) --html
117 # Set this up with gcc if you have gnu ld and the loader will print out
118 # line numbers for undefined references.
122 # Where is our "include" directory? Typically $(srcdir)/../include.
123 # This is essentially the header file directory for the library
124 # routines in libiberty.
125 INCLUDE_DIR
= $(srcdir)/..
/include
126 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
128 # Where is the "-liberty" library? Typically in ../libiberty.
129 LIBIBERTY
= ..
/libiberty
/libiberty.a
131 # Where is the BFD library? Typically in ../bfd.
133 BFD
= $(BFD_DIR
)/libbfd.a
134 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
135 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
137 # Where is the decnumber library? Typically in ../libdecnumber.
138 LIBDECNUMBER_DIR
= ..
/libdecnumber
139 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
140 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
141 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
143 # Where is the READLINE library? Typically in ../readline.
144 READLINE_DIR
= ..
/readline
145 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
146 READLINE
= @READLINE@
147 READLINE_DEPS
= @READLINE_DEPS@
148 READLINE_CFLAGS
= @READLINE_CFLAGS@
150 # Where is expat? This will be empty if expat was not available.
151 LIBEXPAT
= @LIBEXPAT@
153 WARN_CFLAGS
= @WARN_CFLAGS@
154 WERROR_CFLAGS
= @WERROR_CFLAGS@
155 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
156 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
158 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
159 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
161 RDYNAMIC
= @RDYNAMIC@
163 # Where is the INTL library? Typically in ../intl.
165 INTL_DEPS
= @LIBINTL_DEP@
166 INTL_CFLAGS
= @INCINTL@
168 # Did the user give us a --with-sysroot option?
169 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
170 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
172 # Did the user give us a --with-gdb-datadir option?
173 GDB_DATADIR
= @GDB_DATADIR@
175 # Helper code from gnulib.
176 LIBGNU
= gnulib
/libgnu.a
177 INCGNU
= -I
$(srcdir)/gnulib
-Ignulib
179 # Generated headers in the gnulib directory. These must be listed
180 # so that they are generated before other files are compiled.
181 GNULIB_H
= gnulib
/string.h @GNULIB_STDINT_H@
184 # CLI sub directory definitons
188 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
190 cli-interp.o cli-utils.o
193 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
195 cli
/cli-interp.c cli
/cli-utils.c
201 # MI sub directory definitons
204 mi-out.o mi-console.o \
205 mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
206 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
208 mi-main.o mi-parse.o mi-getopt.o
210 mi
/mi-out.c mi
/mi-console.c \
211 mi
/mi-cmds.c mi
/mi-cmd-env.c \
212 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
213 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
214 mi
/mi-cmd-target.c mi
/mi-interp.c \
215 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
222 # TUI sub directory definitions
225 # Name of the TUI program
260 tui
/tui-wingeneral.c \
261 tui
/tui-winsource.c \
269 # python sub directory definitons
271 SUBDIR_PYTHON_OBS
= \
301 SUBDIR_PYTHON_SRCS
= \
303 python
/py-auto-load.c \
305 python
/py-bpevent.c \
306 python
/py-breakpoint.c \
308 python
/py-continueevent.c \
310 python
/py-evtregistry.c \
312 python
/py-exitedevent.c \
314 python
/py-function.c \
315 python
/py-inferior.c \
316 python
/py-infthread.c \
317 python
/py-lazy-string.c \
318 python
/py-objfile.c \
320 python
/py-prettyprint.c \
321 python
/py-progspace.c \
322 python
/py-signalevent.c \
323 python
/py-stopevent.c \
326 python
/py-threadevent.c \
331 SUBDIR_PYTHON_LDFLAGS
=
332 SUBDIR_PYTHON_CFLAGS
=
334 # Opcodes currently live in one of two places. Either they are in the
335 # opcode library, typically ../opcodes, or they are in a header file
337 # Where is the "-lopcodes" library, with (some of) the opcode tables and
339 OPCODES_DIR
= ..
/opcodes
340 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
341 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
342 # Where are the other opcode tables which only have header file
344 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
345 # Some source files like to use #include "opcodes/file.h"
346 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
348 # The simulator is usually nonexistent; targets that include one
349 # should set this to list all the .o or .a files to be linked in.
352 WIN32LIBS
= @WIN32LIBS@
354 # Tcl et al cflags and libraries
356 TCL_CFLAGS
= @TCL_INCLUDE@
357 GDBTKLIBS
= @GDBTKLIBS@
358 # Extra flags that the GDBTK files need:
359 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
362 TK_CFLAGS
= @TK_INCLUDE@
364 X11_CFLAGS
= @TK_XINCLUDES@
368 WIN32LDAPP
= @WIN32LDAPP@
371 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
372 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
374 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
376 # The version of gdbtk we're building. This should be kept
377 # in sync with GDBTK_VERSION and friends in gdbtk.h.
379 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
381 # Gdbtk requires an absolute path to the source directory or
382 # the testsuite won't run properly.
383 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
386 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
387 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
388 SUBDIR_GDBTK_SRCS
= \
389 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
390 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
391 gdbtk
/generic
/gdbtk-interp.c \
392 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
393 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
394 gdbtk
/generic
/gdbtk-main.c
395 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
396 SUBDIR_GDBTK_LDFLAGS
=
397 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
399 CONFIG_OBS
= @CONFIG_OBS@
400 CONFIG_SRCS
= @CONFIG_SRCS@
401 CONFIG_DEPS
= @CONFIG_DEPS@
402 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
403 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
404 CONFIG_ALL
= @CONFIG_ALL@
405 CONFIG_CLEAN
= @CONFIG_CLEAN@
406 CONFIG_INSTALL
= @CONFIG_INSTALL@
407 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
409 # -I. for config files.
410 # -I$(srcdir) for gdb internal headers.
411 # -I$(srcdir)/config for more generic config files.
413 # It is also possible that you will need to add -I/usr/include/sys if
414 # your system doesn't have fcntl.h in /usr/include (which is where it
415 # should be according to Posix).
417 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
418 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
420 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
421 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
423 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
425 # CFLAGS is specifically reserved for setting from the command line
426 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
429 # Set by configure, for e.g. expat. Python installations are such that
430 # C headers are included using their basename (for example, we #include
431 # <Python.h> rather than, say, <python/Python.h>). Since the file names
432 # are sometimes a little generic, we think that the risk of collision
433 # with other header files is high. If that happens, we try to mitigate
434 # a bit the consequences by putting the Python includes last in the list.
435 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @PYTHON_CPPFLAGS@
437 # Need to pass this to testsuite for "make check". Probably should be
438 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
439 # so "make check" has the same result no matter where it is run.
442 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
443 INTERNAL_CFLAGS_BASE
= \
444 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
445 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
446 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
447 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
448 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
449 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
451 # LDFLAGS is specifically reserved for setting from the command line
455 # Profiling options need to go here to work.
456 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
457 # and have it work; that's why CFLAGS is here.
458 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
459 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
461 # If your system is missing alloca(), or, more likely, it's there but
462 # it doesn't work, then refer to libiberty.
464 # Libraries and corresponding dependencies for compiling gdb.
465 # XM_CLIBS, defined in *config files, have host-dependent libs.
466 # LIBIBERTY appears twice on purpose.
467 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
468 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ @PYTHON_LIBS@ \
470 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
471 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
472 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
474 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
475 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
480 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
481 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
487 # XML files to build in to GDB.
488 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
489 $(srcdir)/features
/library-list.dtd
$(srcdir)/features
/osdata.dtd \
490 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd
492 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
493 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
494 # etc., then there will be (as part of the C library or perhaps as
495 # part of libiberty) a POSIX interface. But at least for now the
496 # host-dependent makefile fragment might need to use something else
498 SER_HARDWIRE
= @SER_HARDWIRE@
500 # The `remote' debugging target is supported for most architectures,
501 # but not all (e.g. 960)
502 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
504 # This is remote-sim.o if a simulator is to be linked in.
507 # Target-dependent object files.
508 TARGET_OBS
= @TARGET_OBS@
510 # All target-dependent objects files that require 64-bit CORE_ADDR
511 # (used with --enable-targets=all --enable-64-bit-bfd).
512 ALL_64_TARGET_OBS
= \
513 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
514 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
515 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
516 amd64-linux-tdep.o amd64nbsd-tdep.o \
517 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
518 ia64-hpux-tdep.o ia64-linux-tdep.o ia64-tdep.o \
520 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
521 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
523 # All other target-dependent objects files (used with --enable-targets=all).
525 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
526 armnbsd-tdep.o armobsd-tdep.o \
527 arm-tdep.o arm-wince-tdep.o \
529 bfin-linux-tdep.o bfin-tdep.o \
532 frv-linux-tdep.o frv-tdep.o \
534 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
535 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
536 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
537 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
538 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
539 i386-dicos-tdep.o i386-darwin-tdep.o \
544 m32r-linux-tdep.o m32r-tdep.o \
546 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
549 microblaze-tdep.o microblaze-linux-tdep.o \
550 mips-irix-tdep.o mips-linux-tdep.o \
551 mipsnbsd-tdep.o mips-tdep.o \
552 mn10300-linux-tdep.o mn10300-tdep.o \
556 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
557 rs6000-aix-tdep.o rs6000-tdep.o \
560 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
561 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
562 sparc-sol2-tdep.o sparc-tdep.o \
563 spu-tdep.o spu-multiarch.o solib-spu.o \
565 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
567 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
570 nbsd-tdep.o obsd-tdep.o \
572 solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
573 solib-som.o solib-pa64.o solib-darwin.o \
574 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
575 remote-m32r-sdi.o remote-mips.o \
582 # Host-dependent makefile fragment comes in here.
584 # End of host-dependent makefile fragment
588 "exec_prefix=$(exec_prefix)" \
589 "infodir=$(infodir)" \
590 "datarootdir=$(datarootdir)" \
592 "htmldir=$(htmldir)" \
596 "datadir=$(datadir)" \
597 "includedir=$(includedir)" \
598 "against=$(against)" \
599 "DESTDIR=$(DESTDIR)" \
601 "AR_FLAGS=$(AR_FLAGS)" \
605 "CXXFLAGS=$(CXXFLAGS)" \
606 "DLLTOOL=$(DLLTOOL)" \
607 "LDFLAGS=$(LDFLAGS)" \
609 "MAKEINFO=$(MAKEINFO)" \
610 "MAKEHTML=$(MAKEHTML)" \
611 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
612 "INSTALL=$(INSTALL)" \
613 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
614 "INSTALL_DATA=$(INSTALL_DATA)" \
615 "RUNTEST=$(RUNTEST)" \
616 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
618 # Flags that we pass when building the testsuite.
620 # empty for native, $(target_alias)/ for cross
621 target_subdir
= @target_subdir@
624 if [ -f $${rootme}/../gcc/xgcc ] ; then \
625 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
626 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
628 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
631 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
634 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
640 if [ -f $${rootme}/../gcc/xgcc ] ; then \
641 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
642 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
644 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
647 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
650 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
654 # The use of $$(x_FOR_TARGET) reduces the command line length by not
655 # duplicating the lengthy definition.
656 TARGET_FLAGS_TO_PASS
= \
658 "exec_prefix=$(exec_prefix)" \
659 "against=$(against)" \
660 'CC=$$(CC_FOR_TARGET)' \
661 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
663 'CXX=$$(CXX_FOR_TARGET)' \
664 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
665 "CXXFLAGS=$(CXXFLAGS)" \
666 "INSTALL=$(INSTALL)" \
667 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
668 "INSTALL_DATA=$(INSTALL_DATA)" \
669 "MAKEINFO=$(MAKEINFO)" \
670 "MAKEHTML=$(MAKEHTML)" \
671 "RUNTEST=$(RUNTEST)" \
672 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
673 "FORCE_PARALLEL=$(FORCE_PARALLEL)"
675 # All source files that go into linking GDB.
676 # Links made at configuration time should not be specified here, since
677 # SFILES is used in building the distribution archive.
679 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
681 auxv.c ax-general.c ax-gdb.c \
684 block.c blockframe.c breakpoint.c buildsym.c \
685 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
686 charset.c cli-out.c coffread.c coff-pe-read.c \
687 complaints.c completer.c corefile.c \
688 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
689 d-lang.c d-valprint.c \
691 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
692 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
693 elfread.c environ.c eval.c event-loop.c event-top.c \
694 exceptions.c expprint.c \
695 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
696 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
697 gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
700 infcmd.c inflow.c infrun.c \
703 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
704 language.c linespec.c \
705 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
706 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
707 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
708 memrange.c mi
/mi-common.c \
709 objc-exp.y objc-lang.c \
710 objfiles.c osabi.c observer.c osdata.c \
712 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
713 proc-service.list progspace.c \
714 prologue-value.c psymtab.c \
715 regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
717 serial.c ser-base.c ser-unix.c \
718 solib.c solib-target.c source.c \
719 stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
721 target.c target-descriptions.c target-memory.c \
722 thread.c top.c tracepoint.c \
726 ui-out.c utils.c ui-file.h ui-file.c \
728 valarith.c valops.c valprint.c value.c varobj.c vec.c \
730 xml-tdesc.c xml-support.c \
731 inferior.c gdb_usleep.c \
736 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
738 # Header files that need to have srcdir added. Note that in the cases
739 # where we use a macro like $(gdbcmd_h), things are carefully arranged
740 # so that each .h file is listed exactly once (M-x tags-search works
741 # wrong if TAGS has files twice). Because this is tricky to get
742 # right, it is probably easiest just to list .h files here directly.
744 HFILES_NO_SRCDIR
= osf-share
/cma_debug_client.h \
745 osf-share
/HP800
/cma_thread_io.h osf-share
/cma_sequence.h \
746 osf-share
/cma_mutex.h osf-share
/cma_semaphore_defs.h \
747 osf-share
/cma_list.h osf-share
/cma_handle.h osf-share
/cma_stack.h \
748 osf-share
/cma_util.h osf-share
/RIOS
/cma_thread_io.h \
749 osf-share
/cma_errors.h osf-share
/cma_tcb_defs.h osf-share
/cma_attr.h \
750 osf-share
/cma_stack_int.h osf-share
/cma_init.h \
751 osf-share
/cma_deb_core.h osf-share
/AT386
/cma_thread_io.h \
752 osf-share
/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
753 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
754 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
755 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
756 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
757 c-lang.h d-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
758 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-dump.h cli
/cli-utils.h \
759 cli
/cli-script.h macrotab.h symtab.h version.h gnulib
/wchar.in.h \
760 gnulib
/string.in.h gnulib
/str-two-way.h \
761 gnulib
/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver
/win32-low.h \
762 gdbserver
/i387-fp.h gdbserver
/server.h gdbserver
/terminal.h \
763 gdbserver
/mem-break.h gdbserver
/wincecompat.h gdbserver
/target.h \
764 gdbserver
/linux-low.h gdbserver
/gdb_proc_service.h \
765 gdbserver
/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
766 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
767 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h memrange.h \
768 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
769 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
770 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
771 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
772 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
773 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
774 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
775 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
776 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
777 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
778 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
779 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
780 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
781 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
782 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
783 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
784 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
785 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
786 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
787 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
788 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
789 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
790 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
791 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
792 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
793 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
794 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
795 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
796 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
797 config
/i386
/nm-fbsd.h \
798 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
799 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
800 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
801 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
802 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
803 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
804 psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h
806 # Header files that already have srcdir in them, or which are in objdir.
808 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h
811 # GDB "info" files, which should be included in their entirety
812 INFOFILES
= gdb.
info*
814 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
816 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
817 # default their values the way we do for SER_HARDWIRE; in the future
818 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
819 # variables analogous to SER_HARDWIRE which get defaulted in this
822 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
823 $(REMOTE_OBS
) $(SIM_OBS
)
825 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
826 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
827 # and it's more useful to see it in the .y file.
828 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
830 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
832 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
838 blockframe.o breakpoint.o findvar.o regcache.o \
839 charset.o disasm.o dummy-frame.o dfp.o \
840 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
841 block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
844 expprint.o environ.o stack.o thread.o \
850 macrotab.o macrocmd.o macroexp.o macroscope.o \
852 event-loop.o event-top.o inf-loop.o completer.o \
853 gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
854 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
859 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
860 dbxread.o coffread.o coff-pe-read.o \
861 dwarf2read.o mipsread.o stabsread.o corefile.o \
862 dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
863 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
866 varobj.o vec.o wrapper.o \
867 jv-lang.o jv-valprint.o jv-typeprint.o \
868 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
870 complaints.o typeprint.o \
871 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
872 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
874 serial.o mdebugread.o top.o utils.o \
877 frame.o frame-unwind.o doublest.o \
880 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
882 reggroups.o regset.o \
885 solib.o solib-target.o \
886 prologue-value.o memory-map.o memrange.o xml-support.o xml-syscall.o \
887 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
888 inferior.o osdata.o gdb_usleep.o record.o gcore.o \
893 SUBDIRS
= doc @subdirs@ data-directory
894 CLEANDIRS
= $(SUBDIRS
) gnulib
896 # List of subdirectories in the build tree that must exist.
897 # This is used to force build failures in existing trees when
898 # a new directory is added.
899 # The format here is for the `case' shell command.
900 REQUIRED_SUBDIRS
= doc | testsuite | gnulib | data-directory
902 # For now, shortcut the "configure GDB for fewer languages" stuff.
909 f-exp.c m2-exp.c p-exp.c
915 f-exp.o m2-exp.o p-exp.o
917 # Things which need to be built when making a distribution.
919 DISTSTUFF
= $(YYFILES
)
922 # All generated files which can be included by another file.
923 generated_files
= config.h observer.h observer.inc ada-lex.c \
924 $(GNULIB_H
) $(NAT_GENERATED_FILES
)
930 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
931 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
933 all-tui
: $(TUI
)$(EXEEXT
)
937 # The check target can not use subdir_do, because subdir_do does not
938 # use TARGET_FLAGS_TO_PASS.
940 @if
[ -f testsuite
/Makefile
]; then \
941 rootme
=`pwd`; export rootme
; \
942 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
944 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
947 # The idea is to parallelize testing of multilibs, for example:
948 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
949 # will run 3 concurrent sessions of check, eventually testing all 10
950 # combinations. GNU make is required for the % pattern to work, as is
951 # a shell that expands alternations within braces. If GNU make is not
952 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
953 # prevent serialized checking due to the passed RUNTESTFLAGS.
954 # FIXME: use config.status --config not --version, when available.
956 @if
[ -f testsuite
/config.status
]; then \
957 rootme
=`pwd`; export rootme
; \
958 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
959 target
=`echo "$@" | sed 's,//.*,,'`; \
960 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
961 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
962 testdir
=testsuite.
$$vardots; \
963 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
964 configargs
=`cd testsuite && ./config.status --version | \
965 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
966 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
968 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
969 "\"--srcdir=\$$rootsrc/testsuite\"" \
971 else :; fi
&& cd
$$testdir && \
972 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
973 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
974 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
978 info install-info clean-info
dvi pdf install-pdf html install-html
: force
979 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
982 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
983 pack gdb.t
; rm -f gdb.t
986 # Traditionally "install" depends on "all". But it may be useful
987 # not to; for example, if the user has made some trivial change to a
988 # source file and doesn't care about rebuilding or just wants to save the
989 # time it takes for make to check that all is up to date.
990 # install-only is intended to address that need.
992 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
994 install-only
: $(CONFIG_INSTALL
)
995 transformed_name
=`t='$(program_transform_name)'; \
996 echo gdb | sed -e "$$t"` ; \
997 if
test "x$$transformed_name" = x
; then \
998 transformed_name
=gdb
; \
1002 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1003 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1004 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1005 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1006 $(DESTDIR
)$(man1dir) ; \
1007 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1008 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1009 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1012 transformed_name
=`t='$(program_transform_name)'; \
1013 echo $(TUI) | sed -e "$$t"` ; \
1014 if
test "x$$transformed_name" = x
; then \
1015 transformed_name
=$(TUI
) ; \
1019 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1020 $(INSTALL_PROGRAM
) $(TUI
)$(EXEEXT
) \
1021 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1022 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1023 $(DESTDIR
)$(man1dir) ; \
1024 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1025 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1028 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1030 uninstall: force $(CONFIG_UNINSTALL
)
1031 transformed_name
=`t='$(program_transform_name)'; \
1032 echo gdb | sed -e $$t` ; \
1033 if
test "x$$transformed_name" = x
; then \
1034 transformed_name
=gdb
; \
1038 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1039 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1040 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1041 .PHONY
: uninstall-tui
1043 transformed_name
=`t='$(program_transform_name)'; \
1044 echo $(TUI) | sed -e $$t` ; \
1045 if
test "x$$transformed_name" = x
; then \
1046 transformed_name
=$(TUI
) ; \
1050 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1051 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1053 # The C++ name parser can be built standalone for testing.
1054 test-cp-name-parser.o
: cp-name-parser.c
1055 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1058 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1059 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1060 test-cp-name-parser.o
$(LIBIBERTY
)
1062 # We do this by grepping through sources. If that turns out to be too slow,
1063 # maybe we could just require every .o file to have an initialization routine
1064 # of a given name (top.o -> _initialize_top, etc.).
1066 # Formatting conventions: The name of the _initialize_* routines must start
1067 # in column zero, and must not be inside #if.
1069 # Note that the set of files with init functions might change, or the names
1070 # of the functions might change, so this files needs to depend on all the
1071 # object files that will be linked into gdb.
1073 # FIXME: There is a problem with this approach - init.c may force
1074 # unnecessary files to be linked in.
1076 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1077 # the first call is to _initialize_gdbtypes (implemented by explicitly
1078 # putting that function's name first in the init.l-tmp file). This is
1079 # a hack to ensure that all the architecture dependant global
1080 # builtin_type_* variables are initialized before anything else
1081 # (per-architecture code is called in the same order that it is
1082 # registered). The ``correct fix'' is to have all the builtin types
1083 # made part of the architecture and initialize them on-demand (using
1084 # gdbarch_data) just like everything else. The catch is that other
1085 # modules still take the address of these builtin types forcing them
1086 # to be variables, sigh!
1088 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1089 # anchored on the first column and excludes the ``/'' character so
1090 # that it doesn't add the $(srcdir) prefix to any file that already
1091 # has an absolute path. It turns out that $(DEC)'s True64 make
1092 # automatically adds the $(srcdir) prefixes when it encounters files
1093 # in sub-directories such as cli/ and mi/.
1095 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1096 # duplicates. Files in the gdb/ directory can end up appearing in
1097 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1099 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1100 init.c
: $(INIT_FILES
)
1102 @
rm -f init.c-tmp init.l-tmp
1104 @echo gdbtypes
> init.l-tmp
1105 @
-LANG
=C
; export LANG
; \
1106 LC_ALL
=C
; export LC_ALL
; \
1107 echo
$(INIT_FILES
) | \
1110 -e
'/^gdbtypes.[co]$$/d' \
1111 -e
'/^init.[co]$$/d' \
1112 -e
'/xdr_ld.[co]$$/d' \
1113 -e
'/xdr_ptrace.[co]$$/d' \
1114 -e
'/xdr_rdb.[co]$$/d' \
1115 -e
'/udr.[co]$$/d' \
1116 -e
'/udip2soc.[co]$$/d' \
1117 -e
'/udi2go32.[co]$$/d' \
1118 -e
'/version.[co]$$/d' \
1119 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1120 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1121 -e
's/\.[co]$$/.c/' \
1122 -e
's,signals\.c,common/signals\.c,' \
1123 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1125 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1130 * ) echo
$$f ; fs
="$$fs $$f";; \
1133 @echo
'/* Do not modify this file. */' >>init.c-tmp
1134 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1135 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1136 @echo
'#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
1137 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1138 @echo
'void' >>init.c-tmp
1139 @echo
'initialize_all_files (void)' >>init.c-tmp
1140 @echo
'{' >>init.c-tmp
1141 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1142 @echo
'}' >>init.c-tmp
1144 @mv init.c-tmp init.c
1148 # Removing the old gdb first works better if it is running, at least on SunOS.
1149 gdb
$(EXEEXT
): gdb.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1151 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1152 -o gdb
$(EXEEXT
) gdb.o libgdb.a \
1153 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1155 $(TUI
)$(EXEEXT
): tui-main.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1156 rm -f
$(TUI
)$(EXEEXT
)
1157 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1158 -o
$(TUI
)$(EXEEXT
) tui-main.o libgdb.a \
1159 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1161 # Convenience rule to handle recursion.
1162 $(LIBGNU
) $(GNULIB_H
): all-lib
1163 all-lib
: gnulib
/Makefile
1164 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=gnulib subdir_do
1167 # Convenience rule to handle recursion.
1168 .PHONY
: all-data-directory
1169 all-data-directory
: data-directory
/Makefile
1170 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1172 # Create a library of the gdb object files and build GDB by linking
1175 # init.o is very important. It pulls in the rest of GDB.
1176 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1177 libgdb.a
: $(LIBGDB_OBS
)
1179 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1182 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1183 # on itself without copying the executable. So "make gdb1" will make
1184 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1185 # Removing gdb1 before the copy is the right thing if gdb1 is open
1186 # in another process.
1187 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1189 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1191 # Put the proper machine-specific files first, so M-. on a machine
1192 # specific routine gets the one for the correct machine. (FIXME: those
1193 # files go in twice; we should be removing them from the main list).
1195 # TAGS depends on all the files that go into it so you can rebuild TAGS
1196 # with `make TAGS' and not have to say `rm TAGS' first.
1198 GDB_NM_FILE
= @GDB_NM_FILE@
1199 TAGS
: $(DEPFILES
) $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1201 @etags
$(srcdir)/$(GDB_NM_FILE
) \
1202 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1203 echo $(srcdir)/$$i ; \
1204 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1206 done) | sed -e 's/\.o$$/\.c/'` \
1207 `find $(srcdir)/config -name '*.h' -print`
1211 clean mostlyclean: $(CONFIG_CLEAN
)
1212 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1213 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1214 rm -f init.c version.c observer.h observer.inc
1215 rm -f gdb
$(EXEEXT
) core make.log
1216 rm -f gdb
[0-9]$(EXEEXT
)
1217 rm -f test-cp-name-parser
$(EXEEXT
)
1218 rm -f xml-builtin.c stamp-xml
1223 rm -f
$(TUI
)$(EXEEXT
)
1225 # This used to depend on c-exp.c m2-exp.c TAGS
1226 # I believe this is wrong; the makefile standards for distclean just
1227 # describe removing files; the only sort of "re-create a distribution"
1228 # functionality described is if the distributed files are unmodified.
1229 # NB: While GDBSERVER might be configured on native systems, it isn't
1230 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1232 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1233 rm -f gdbserver
/config.status gdbserver
/config.log
1234 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1235 rm -f gdbserver
/Makefile gdbserver
/config.cache
1236 rm -f nm.h config.status config.h stamp-h .gdbinit
1237 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1238 rm -f config.log config.cache
1242 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1243 realclean: maintainer-clean
1245 local-maintainer-clean
:
1246 @echo
"This command is intended for maintainers to use;"
1247 @echo
"it deletes files that may require special tools to rebuild."
1250 ada-lex.c ada-exp.c \
1253 f-exp.c m2-exp.c p-exp.c
1254 rm -f TAGS
$(INFOFILES
)
1256 rm -f nm.h config.status
1258 do-maintainer-clean
:
1259 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1262 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1263 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1266 @for i in
$(DODIRS
); do \
1268 $(REQUIRED_SUBDIRS
)) \
1269 if
[ ! -f .
/$$i/Makefile
] ; then \
1270 echo
"Missing $$i/Makefile" >&2 ; \
1274 if
[ -f .
/$$i/Makefile
] ; then \
1276 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1277 else exit
1 ; fi
; \
1281 Makefile
: Makefile.in config.status @frags@
1282 # Regenerate the Makefile and the tm.h / nm.h links.
1283 CONFIG_FILES
="Makefile" \
1286 $(SHELL
) config.status
1288 gnulib
/Makefile
: gnulib
/Makefile.in gnulib
/Makefile.in config.status @frags@
1289 CONFIG_FILES
="gnulib/Makefile" \
1290 CONFIG_COMMANDS
="depfiles" \
1293 $(SHELL
) config.status
1295 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1296 CONFIG_FILES
="data-directory/Makefile" \
1297 CONFIG_COMMANDS
="depfiles" \
1300 $(SHELL
) config.status
1302 config.h
: stamp-h
; @true
1303 stamp-h
: $(srcdir)/config.in config.status
1304 CONFIG_HEADERS
=config.h
:config.in \
1305 CONFIG_COMMANDS
="default depdir" \
1308 $(SHELL
) config.status
1310 config.status
: $(srcdir)/configure configure.tgt configure.host
1311 $(SHELL
) config.status
--recheck
1314 ACLOCAL_AMFLAGS
= -I gnulib
/m4
-I ..
/config
1317 gnulib
/m4
/extensions.m4 \
1318 gnulib
/m4
/gnulib-common.m4 \
1319 gnulib
/m4
/gnulib-comp.m4 \
1320 gnulib
/m4
/include_next.m4 \
1321 gnulib
/m4
/longlong.m4 \
1322 gnulib
/m4
/memchr.m4 \
1323 gnulib
/m4
/memmem.m4 \
1324 gnulib
/m4
/onceonly_2_57.m4 \
1325 gnulib
/m4
/stdint.m4 \
1326 gnulib
/m4
/string_h.m4 \
1327 gnulib
/m4
/wchar.m4 \
1328 ..
/config
/extensions.m4 \
1329 ..
/config
/lead-dot.m4 \
1330 ..
/config
/proginstall.m4 \
1332 ..
/config
/acinclude.m4 \
1333 ..
/config
/override.m4 \
1334 ..
/config
/gettext-sister.m4 \
1335 ..
/config
/lib-ld.m4 \
1336 ..
/config
/lib-prefix.m4 \
1337 ..
/config
/lib-link.m4 \
1340 ..
/config
/depstand.m4 \
1341 ..
/config
/lcmessage.m4 \
1342 ..
/config
/codeset.m4
1344 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1345 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1348 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1349 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1350 cd
$(srcdir) && $(AUTOCONF
)
1352 AUTOHEADER
= autoheader
1353 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1354 cd
$(srcdir) && $(AUTOHEADER
)
1358 # automatic rebuilding in automake-generated Makefiles requires
1359 # this rule in the toplevel Makefile, which, with GNU make, causes
1360 # the desired updates through the implicit regeneration of the Makefile
1361 # and all of its prerequisites.
1368 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1370 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1372 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1374 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1376 # GDB MANUAL: TeX dvi file
1378 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1380 # GDB MANUAL: info file
1382 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1384 # Make copying.c from COPYING
1385 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1386 awk
-f
$(srcdir)/copying.awk \
1387 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1388 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1390 version.c
: Makefile version.in
1391 rm -f version.c-tmp version.c
1392 echo
'#include "version.h"' >> version.c-tmp
1393 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1394 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1395 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1396 mv version.c-tmp version.c
1398 observer.h
: observer.sh doc
/observer.texi
1399 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1401 observer.inc
: observer.sh doc
/observer.texi
1402 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1405 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1406 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1408 gdb.cxref
: $(SFILES
)
1409 cxref
-I.
$(SFILES
) >gdb.cxref
1413 # GNU Make has an annoying habit of putting *all* the Makefile variables
1414 # into the environment, unless you include this target as a circumvention.
1415 # Rumor is that this will be fixed (and this target can be removed)
1419 # GNU Make 3.63 has a different problem: it keeps tacking command line
1420 # overrides onto the definition of $(MAKE). This variable setting
1426 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1427 alpha-tdep.c alpha-mdebug-tdep.c \
1428 alpha-linux-tdep.c alpha-osf1-tdep.c \
1429 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1430 amd64-nat.c amd64-tdep.c \
1431 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1432 amd64nbsd-nat.c amd64nbsd-tdep.c \
1433 amd64obsd-nat.c amd64obsd-tdep.c \
1434 amd64-darwin-tdep.c \
1435 amd64-dicos-tdep.c \
1436 amd64-linux-nat.c amd64-linux-tdep.c \
1438 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1439 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1441 bfin-linux-tdep.c bfin-tdep.c \
1442 bsd-uthread.c bsd-kvm.c \
1443 core-regset.c corelow.c \
1444 dcache.c dicos-tdep.c darwin-nat.c \
1449 go32-nat.c h8300-tdep.c \
1450 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1451 hppa-linux-tdep.c hppa-linux-nat.c \
1452 hppabsd-nat.c hppabsd-tdep.c \
1454 hppanbsd-nat.c hppanbsd-tdep.c \
1455 i386-tdep.c i386-linux-nat.c \
1456 i386v4-nat.c i386-cygwin-tdep.c \
1457 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1458 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1460 i386-darwin-tdep.c i386-darwin-nat.c \
1462 i386-linux-tdep.c i386-nat.c \
1463 i386-sol2-nat.c i386-sol2-tdep.c \
1464 i386gnu-nat.c i386gnu-tdep.c \
1465 ia64-hpux-nat.c ia64-hpux-tdep.c \
1466 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1467 inf-ptrace.c inf-ttrace.c \
1476 m32r-linux-nat.c m32r-linux-tdep.c \
1478 m68kbsd-nat.c m68kbsd-tdep.c \
1479 m68klinux-nat.c m68klinux-tdep.c \
1480 m88k-tdep.c m88kbsd-nat.c \
1481 microblaze-tdep.c microblaze-linux-tdep.c \
1483 mips-linux-nat.c mips-linux-tdep.c \
1486 mipsnbsd-nat.c mipsnbsd-tdep.c \
1487 mips64obsd-nat.c mips64obsd-tdep.c \
1488 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1490 somread.c solib-som.c \
1492 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1493 ppcnbsd-nat.c ppcnbsd-tdep.c \
1494 ppcobsd-nat.c ppcobsd-tdep.c \
1496 remote-m32r-sdi.c remote-mips.c \
1499 rs6000-nat.c rs6000-tdep.c \
1500 s390-tdep.c s390-nat.c \
1502 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1503 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1505 solib-irix.c solib-svr4.c solib-sunos.c \
1506 sparc-linux-nat.c sparc-linux-tdep.c \
1507 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1508 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1509 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1510 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1511 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1512 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1514 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1515 windows-nat.c windows-tdep.c \
1516 xcoffread.c xcoffsolib.c \
1518 xtensa-tdep.c xtensa-config.c \
1519 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1521 # Some files need explicit build rules (due to -Werror problems) or due
1522 # to sub-directory fun 'n' games.
1524 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1525 main.o
: $(srcdir)/main.c
1526 $(COMPILE
) $(TARGET_SYSTEM_ROOT_DEFINE
) -DBINDIR
=\"$(bindir)\" $(srcdir)/main.c
1529 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1530 # errors. It turns out that that is the least of monitor.c's
1531 # problems. The function print_vsprintf appears to be using
1532 # va_arg(long) to extract CORE_ADDR parameters - something that
1533 # definitly will not work. "monitor.c" needs to be rewritten so that
1534 # it doesn't use format strings and instead uses callbacks.
1535 monitor.o
: $(srcdir)/monitor.c
1536 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1537 $(COMPILE.post
) $(srcdir)/monitor.c
1540 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1541 # checks format strings.
1542 printcmd.o
: $(srcdir)/printcmd.c
1543 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1544 $(COMPILE.post
) $(srcdir)/printcmd.c
1547 # Message files. Based on code in gcc/Makefile.in.
1549 # Rules for generating translated message descriptions. Disabled by
1550 # autoconf if the tools are not available.
1552 .SUFFIXES
: .po .gmo .pox .pot
1553 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1557 # This notation should be acceptable to all Make implementations used
1558 # by people who are interested in updating .po files.
1559 update-po
: $(CATALOGS
:.gmo
=.pox
)
1561 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1564 -test -d po || mkdir po
1565 $(GMSGFMT
) --statistics
-o
$@
$<
1567 # The new .po has to be gone over by hand, so we deposit it into
1568 # build/po with a different extension. If build/po/$(PACKAGE).pot
1569 # exists, use it (it was just created), else use the one in srcdir.
1571 -test -d po || mkdir po
1572 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1573 then echo po/$(PACKAGE).pot; \
1574 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1576 # This rule has to look for .gmo modules in both srcdir and the cwd,
1577 # and has to check that we actually have a catalog for each language,
1578 # in case they weren't built or included with the distribution.
1580 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1581 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1582 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1583 if
[ -f
$$cat ]; then
:; \
1584 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1587 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1588 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1589 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1590 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1591 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1594 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1595 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1596 if
[ -f
$$cat ]; then
:; \
1597 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1600 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1601 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1603 # Delete po/*.gmo only if we are not building in the source directory.
1605 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1607 # Rule for regenerating the message template (gdb.pot). Instead of
1608 # forcing everyone to edit POTFILES.in, which proved impractical, this
1609 # rule has no dependencies and always regenerates gdb.pot. This is
1610 # relatively harmless since the .po files do not directly depend on
1611 # it. The .pot file is left in the build directory. Since GDB's
1612 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1613 # files) force this rule.
1614 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1615 po
/$(PACKAGE
).pot
: force
1616 -test -d po || mkdir po
1617 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1621 # YACC/LEX dependencies
1623 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1624 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1625 # said LANG-exp.c rather than ./c-exp.c some makes would
1626 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1627 # decls for malloc/realloc/free which conflict with everything else.
1628 # Strictly speaking c-exp.c should therefore depend on
1629 # Makefile.in, but that was a pretty big annoyance.
1634 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1635 ||
(rm -f
$@
; false
)
1636 sed
-e
'/extern.*malloc/d' \
1637 -e
'/extern.*realloc/d' \
1638 -e
'/extern.*free/d' \
1639 -e
'/include.*malloc.h/d' \
1640 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1641 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1642 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1643 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1644 -e
'/^#line.*y.tab.c/d' \
1645 -e
"s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
1649 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1650 $(FLEX
) -o
$@
$< && \
1652 sed
-e
'/extern.*malloc/d' \
1653 -e
'/extern.*realloc/d' \
1654 -e
'/extern.*free/d' \
1655 -e
'/include.*malloc.h/d' \
1656 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1657 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1658 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1659 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1660 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1664 elif
[ -f
$@
]; then \
1665 echo
"Warning: $*.c older than $*.l and flex not available."; \
1667 echo
"$@ missing and flex not available."; \
1671 .PRECIOUS
: ada-lex.c
1675 xml-builtin.c
: stamp-xml
; @true
1676 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1677 rm -f xml-builtin.tmp
1679 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1680 xml-builtin.tmp
$(XMLFILES
)
1681 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1682 echo stamp
> stamp-xml
1684 .PRECIOUS
: xml-builtin.c
1687 # gdb/cli/ dependencies
1689 # Need to explicitly specify the compile rule as make will do nothing
1690 # or try to compile the object file into the sub-directory.
1692 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1693 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1696 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1697 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1700 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1701 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1704 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1705 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1708 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1709 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1712 cli-script.o
: $(srcdir)/cli
/cli-script.c
1713 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1716 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1717 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1720 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1721 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1726 # GDBTK sub-directory
1728 # Need to explicitly specify the compile rule as make will do nothing
1729 # or try to compile the object file into the mi directory.
1731 all-gdbtk
: insight
$(EXEEXT
)
1734 transformed_name
=`t='$(program_transform_name)'; \
1735 echo insight | sed -e $$t` ; \
1736 if
test "x$$transformed_name" = x
; then \
1737 transformed_name
=insight
; \
1741 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1742 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1743 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1744 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1745 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1746 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1747 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1748 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1749 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1750 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1751 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1752 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1753 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1754 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1755 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1756 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1757 cd
$(srcdir)/gdbtk
/library
; \
1758 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1760 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1764 transformed_name
=`t='$(program_transform_name)'; \
1765 echo insight | sed -e $$t` ; \
1766 if
test "x$$transformed_name" = x
; then \
1767 transformed_name
=insight
; \
1771 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1772 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1775 rm -f insight
$(EXEEXT
)
1777 # Removing the old gdb first works better if it is running, at least on SunOS.
1778 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1779 $(CDEPS
) $(TDEPLIBS
)
1780 rm -f insight
$(EXEEXT
)
1781 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1782 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1783 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1785 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1786 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1788 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1789 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1791 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1792 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1794 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1795 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1798 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1799 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1802 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1803 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1806 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1807 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1810 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1811 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1814 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1815 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1818 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1819 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1822 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1823 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1826 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1827 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1830 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1831 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1836 # gdb/mi/ dependencies
1838 # Need to explicitly specify the compile rule as make will do nothing
1839 # or try to compile the object file into the sub-directory.
1841 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1842 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1845 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1846 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1849 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1850 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1853 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1854 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1857 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1858 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1861 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1862 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1865 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1866 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1869 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1870 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1873 mi-console.o
: $(srcdir)/mi
/mi-console.c
1874 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1877 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1878 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1881 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1882 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1885 mi-main.o
: $(srcdir)/mi
/mi-main.c
1886 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1889 mi-out.o
: $(srcdir)/mi
/mi-out.c
1890 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1893 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1894 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1897 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1898 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1901 mi-common.o
: $(srcdir)/mi
/mi-common.c
1902 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1905 # gdb/common/ dependencies
1907 # Need to explicitly specify the compile rule as make will do nothing
1908 # or try to compile the object file into the sub-directory.
1910 signals.o
: $(srcdir)/common
/signals.c
1911 $(COMPILE
) $(srcdir)/common
/signals.c
1915 # gdb/tui/ dependencies
1917 # Need to explicitly specify the compile rule as make will do nothing
1918 # or try to compile the object file into the sub-directory.
1920 tui.o
: $(srcdir)/tui
/tui.c
1921 $(COMPILE
) $(srcdir)/tui
/tui.c
1924 tui-command.o
: $(srcdir)/tui
/tui-command.c
1925 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1928 tui-data.o
: $(srcdir)/tui
/tui-data.c
1929 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1932 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1933 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1936 tui-file.o
: $(srcdir)/tui
/tui-file.c
1937 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1940 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1941 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1944 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1945 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1948 tui-io.o
: $(srcdir)/tui
/tui-io.c
1949 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1952 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1953 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1956 tui-main.o
: $(srcdir)/tui
/tui-main.c
1957 $(COMPILE
) $(srcdir)/tui
/tui-main.c
1960 tui-out.o
: $(srcdir)/tui
/tui-out.c
1961 $(COMPILE
) $(srcdir)/tui
/tui-out.c
1964 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
1965 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
1968 tui-source.o
: $(srcdir)/tui
/tui-source.c
1969 $(COMPILE
) $(srcdir)/tui
/tui-source.c
1972 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
1973 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
1976 tui-win.o
: $(srcdir)/tui
/tui-win.c
1977 $(COMPILE
) $(srcdir)/tui
/tui-win.c
1980 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
1981 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
1984 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
1985 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
1988 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
1989 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
1993 # gdb/python/ dependencies
1995 # Need to explicitly specify the compile rule as make will do nothing
1996 # or try to compile the object file into the sub-directory.
1998 # Flags needed to compile Python code
1999 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2001 python.o
: $(srcdir)/python
/python.c
2002 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2005 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2006 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2009 py-block.o
: $(srcdir)/python
/py-block.c
2010 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2013 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2014 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2017 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2018 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2021 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2022 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2025 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2026 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2029 py-event.o
: $(srcdir)/python
/py-event.c
2030 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2033 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2034 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2037 py-evts.o
: $(srcdir)/python
/py-evts.c
2038 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2041 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2042 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2045 py-frame.o
: $(srcdir)/python
/py-frame.c
2046 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2049 py-function.o
: $(srcdir)/python
/py-function.c
2050 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2053 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2054 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2057 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2058 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2061 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2062 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2065 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2066 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2069 py-param.o
: $(srcdir)/python
/py-param.c
2070 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2073 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2074 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2077 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2078 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2081 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2082 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2085 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2086 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2089 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2090 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2093 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2094 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2097 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2098 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2101 py-type.o
: $(srcdir)/python
/py-type.c
2102 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2105 py-utils.o
: $(srcdir)/python
/py-utils.c
2106 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2109 py-value.o
: $(srcdir)/python
/py-value.c
2110 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2114 # Dependency tracking. Most of this is conditional on GNU Make being
2115 # found by configure; if GNU Make is not found, we fall back to a
2119 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2120 # Note that we put the dependencies into a .Tpo file, then move them
2121 # into place if the compile succeeds. We need this because gcc does
2122 # not atomically write the dependency output file.
2123 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2124 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2125 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2126 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2128 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2129 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2130 # depcomp handles atomicity for us, so we don't need a postcompile
2132 @GMAKE_TRUE@
override POSTCOMPILE
=
2135 # A list of all the objects we might care about in this build, for
2136 # dependency tracking.
2137 all_object_files
= gdb.o tui-main.o
$(LIBGDB_OBS
) gdbtk-main.o \
2138 test-cp-name-parser.o
2140 # Ensure that generated files are created early. Use order-only
2141 # dependencies if available. They require GNU make 3.80 or newer,
2142 # and the .VARIABLES variable was introduced at the same time.
2143 @GMAKE_TRUE@
ifdef .VARIABLES
2144 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2146 $(all_object_files
) : $(generated_files
)
2150 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2152 ### end of the gdb Makefile.in.