gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 prefix = @prefix@
  21 exec_prefix = @exec_prefix@
  22
  23 host_alias = @host_alias@
  24 target_alias = @target_alias@
  25 program_transform_name = @program_transform_name@
  26 bindir = @bindir@
  27 libdir = @libdir@
  28 tooldir = $(libdir)/$(target_alias)
  29
  30 datadir = @datadir@
  31 localedir = @localedir@
  32 mandir = @mandir@
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = @infodir@
  43 datarootdir = @datarootdir@
  44 docdir = @docdir@
  45 htmldir = @htmldir@
  46 pdfdir = @pdfdir@
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 MAKEHTML = $(MAKEINFO) --html
 115 MAKEHTMLFLAGS =
 116
 117 # Set this up with gcc if you have gnu ld and the loader will print out
 118 # line numbers for undefined references.
 119 #CC_LD=gcc -static
 120 CC_LD=$(CC)
 121
 122 # Where is our "include" directory?  Typically $(srcdir)/../include.
 123 # This is essentially the header file directory for the library
 124 # routines in libiberty.
 125 INCLUDE_DIR =  $(srcdir)/../include
 126 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 127
 128 # Where is the "-liberty" library?  Typically in ../libiberty.
 129 LIBIBERTY = ../libiberty/libiberty.a
 130
 131 # Where is the BFD library?  Typically in ../bfd.
 132 BFD_DIR = ../bfd
 133 BFD = $(BFD_DIR)/libbfd.a
 134 BFD_SRC = $(srcdir)/$(BFD_DIR)
 135 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 136
 137 # Where is the decnumber library?  Typically in ../libdecnumber.
 138 LIBDECNUMBER_DIR = ../libdecnumber
 139 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 140 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 141 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 142
 143 # Where is the READLINE library?  Typically in ../readline.
 144 READLINE_DIR = ../readline
 145 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 146 READLINE = @READLINE@
 147 READLINE_DEPS = @READLINE_DEPS@
 148 READLINE_CFLAGS = @READLINE_CFLAGS@
 149
 150 # Where is expat?  This will be empty if expat was not available.
 151 LIBEXPAT = @LIBEXPAT@
 152
 153 WARN_CFLAGS = @WARN_CFLAGS@
 154 WERROR_CFLAGS = @WERROR_CFLAGS@
 155 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 156 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 157
 158 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 159
 160 # Where is the INTL library?  Typically in ../intl.
 161 INTL = @LIBINTL@
 162 INTL_DEPS = @LIBINTL_DEP@
 163 INTL_CFLAGS = @INCINTL@
 164
 165 # Did the user give us a --with-sysroot option?
 166 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 167 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 168
 169 # Helper code from gnulib.
 170 LIBGNU = gnulib/libgnu.a
 171 INCGNU = -I$(srcdir)/gnulib -Ignulib
 172
 173 # Generated headers in the gnulib directory.  These must be listed
 174 # so that they are generated before other files are compiled.
 175 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 176
 177 #
 178 # CLI sub directory definitons
 179 #
 180 SUBDIR_CLI_OBS = \
 181         cli-dump.o \
 182         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
 183         cli-logging.o \
 184         cli-interp.o
 185 SUBDIR_CLI_SRCS = \
 186         cli/cli-dump.c \
 187         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 188         cli/cli-logging.c \
 189         cli/cli-interp.c
 190 SUBDIR_CLI_DEPS =
 191 SUBDIR_CLI_LDFLAGS=
 192 SUBDIR_CLI_CFLAGS=
 193
 194 #
 195 # MI sub directory definitons
 196 #
 197 SUBDIR_MI_OBS = \
 198         mi-out.o mi-console.o \
 199         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 200         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 201         mi-interp.o \
 202         mi-main.o mi-parse.o mi-getopt.o mi-common.o
 203 SUBDIR_MI_SRCS = \
 204         mi/mi-out.c mi/mi-console.c \
 205         mi/mi-cmds.c mi/mi-cmd-env.c \
 206         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 207         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 208         mi/mi-cmd-target.c mi/mi-interp.c \
 209         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c mi/mi-common.c
 210 SUBDIR_MI_DEPS =
 211 SUBDIR_MI_LDFLAGS=
 212 SUBDIR_MI_CFLAGS= \
 213         -DMI_OUT=1
 214
 215 #
 216 # TUI sub directory definitions
 217 #
 218
 219 # Name of the TUI program
 220 TUI=gdbtui
 221
 222 SUBDIR_TUI_OBS = \
 223         tui-command.o \
 224         tui-data.o \
 225         tui-disasm.o \
 226         tui-file.o tui.o \
 227         tui-hooks.o \
 228         tui-interp.o \
 229         tui-io.o \
 230         tui-layout.o \
 231         tui-out.o \
 232         tui-regs.o \
 233         tui-source.o \
 234         tui-stack.o \
 235         tui-win.o \
 236         tui-windata.o \
 237         tui-wingeneral.o \
 238         tui-winsource.o
 239 SUBDIR_TUI_SRCS = \
 240         tui/tui-command.c \
 241         tui/tui-data.c \
 242         tui/tui-disasm.c \
 243         tui/tui-file.c \
 244         tui/tui-hooks.c \
 245         tui/tui-interp.c \
 246         tui/tui-io.c \
 247         tui/tui-layout.c \
 248         tui/tui-out.c \
 249         tui/tui-regs.c \
 250         tui/tui-source.c \
 251         tui/tui-stack.c \
 252         tui/tui-win.c \
 253         tui/tui-windata.c \
 254         tui/tui-wingeneral.c \
 255         tui/tui-winsource.c \
 256         tui/tui.c
 257 SUBDIR_TUI_DEPS =
 258 SUBDIR_TUI_LDFLAGS=
 259 SUBDIR_TUI_CFLAGS= \
 260         -DTUI=1
 261
 262 #
 263 # python sub directory definitons
 264 #
 265 SUBDIR_PYTHON_OBS = \
 266         python.o \
 267         python-cmd.o \
 268         python-frame.o \
 269         python-function.o \
 270         python-objfile.o \
 271         python-prettyprint.o \
 272         python-type.o \
 273         python-utils.o \
 274         python-value.o
 275 SUBDIR_PYTHON_SRCS = \
 276         python/python.c \
 277         python/python-cmd.c \
 278         python/python-frame.c \
 279         python/python-function.c \
 280         python/python-objfile.c \
 281         python/python-prettyprint.c \
 282         python/python-type.c \
 283         python/python-utils.c \
 284         python/python-value.c
 285 SUBDIR_PYTHON_DEPS =
 286 SUBDIR_PYTHON_LDFLAGS=
 287 SUBDIR_PYTHON_CFLAGS=
 288
 289
 290 # Opcodes currently live in one of two places.  Either they are in the
 291 # opcode library, typically ../opcodes, or they are in a header file
 292 # in INCLUDE_DIR.
 293 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 294 # disassemblers?
 295 OPCODES_DIR = ../opcodes
 296 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 297 OPCODES = $(OPCODES_DIR)/libopcodes.a
 298 # Where are the other opcode tables which only have header file
 299 # versions?
 300 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 301 OPCODES_CFLAGS = -I$(OP_INCLUDE)
 302
 303 # The simulator is usually nonexistent; targets that include one
 304 # should set this to list all the .o or .a files to be linked in.
 305 SIM = @SIM@
 306
 307 WIN32LIBS = @WIN32LIBS@
 308
 309 # Tcl et al cflags and libraries
 310 TCL = @TCL_LIBRARY@
 311 TCL_CFLAGS = @TCL_INCLUDE@
 312 GDBTKLIBS = @GDBTKLIBS@
 313 # Extra flags that the GDBTK files need:
 314 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 315
 316 TK = @TK_LIBRARY@
 317 TK_CFLAGS = @TK_INCLUDE@
 318
 319 X11_CFLAGS = @TK_XINCLUDES@
 320 X11_LDFLAGS =
 321 X11_LIBS =
 322
 323 WIN32LDAPP = @WIN32LDAPP@
 324
 325 LIBGUI = @LIBGUI@
 326 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 327 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 328
 329 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 330
 331 # The version of gdbtk we're building. This should be kept
 332 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 333 GDBTK_VERSION = 1.0
 334 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 335
 336 # Gdbtk requires an absolute path to the source directory or
 337 # the testsuite won't run properly.
 338 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 339
 340 SUBDIR_GDBTK_OBS = \
 341         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 342         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 343 SUBDIR_GDBTK_SRCS = \
 344         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 345         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 346         gdbtk/generic/gdbtk-interp.c \
 347         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 348         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 349         gdbtk/generic/gdbtk-main.c
 350 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 351 SUBDIR_GDBTK_LDFLAGS=
 352 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 353
 354 CONFIG_OBS= @CONFIG_OBS@
 355 CONFIG_SRCS= @CONFIG_SRCS@
 356 CONFIG_DEPS= @CONFIG_DEPS@
 357 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 358 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 359 CONFIG_ALL= @CONFIG_ALL@
 360 CONFIG_CLEAN= @CONFIG_CLEAN@
 361 CONFIG_INSTALL = @CONFIG_INSTALL@
 362 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 363
 364 # -I. for config files.
 365 # -I$(srcdir) for gdb internal headers.
 366 # -I$(srcdir)/config for more generic config files.
 367
 368 # It is also possible that you will need to add -I/usr/include/sys if
 369 # your system doesn't have fcntl.h in /usr/include (which is where it
 370 # should be according to Posix).
 371 DEFS = @DEFS@
 372 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
 373         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 374
 375 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 376 GLOBAL_CFLAGS = $(MH_CFLAGS)
 377
 378 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 379
 380 # CFLAGS is specifically reserved for setting from the command line
 381 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 382 CFLAGS = @CFLAGS@
 383
 384 # Set by configure, for e.g. expat.
 385 INTERNAL_CPPFLAGS = @CPPFLAGS@
 386
 387 # Need to pass this to testsuite for "make check".  Probably should be
 388 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 389 # so "make check" has the same result no matter where it is run.
 390 CXXFLAGS = -g -O
 391
 392 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 393 INTERNAL_CFLAGS_BASE = \
 394         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 395         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 396         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 397         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 398 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 399 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 400
 401 # LDFLAGS is specifically reserved for setting from the command line
 402 # when running make.
 403 LDFLAGS = @LDFLAGS@
 404
 405 # Profiling options need to go here to work.
 406 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 407 # and have it work; that's why CFLAGS is here.
 408 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 409 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 410
 411 # If your system is missing alloca(), or, more likely, it's there but
 412 # it doesn't work, then refer to libiberty.
 413
 414 # Libraries and corresponding dependencies for compiling gdb.
 415 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 416 # LIBIBERTY appears twice on purpose.
 417 # If you have the Cygnus libraries installed,
 418 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 419 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 420         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 421         -lintl -liberty $(LIBGNU)
 422 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 423         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 424         $(LIBEXPAT) \
 425         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 426 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 427         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 428
 429 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 430 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 431
 432 DIST=gdb
 433
 434 LINT=/usr/5bin/lint
 435 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 436         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 437         $(INTL_CFLAGS)
 438
 439 RUNTEST = runtest
 440 RUNTESTFLAGS=
 441
 442 # XML files to build in to GDB.
 443 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 444         $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd
 445
 446 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 447 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 448 # etc., then there will be (as part of the C library or perhaps as
 449 # part of libiberty) a POSIX interface.  But at least for now the
 450 # host-dependent makefile fragment might need to use something else
 451 # besides ser-unix.o
 452 SER_HARDWIRE = @SER_HARDWIRE@
 453
 454 # The `remote' debugging target is supported for most architectures,
 455 # but not all (e.g. 960)
 456 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 457
 458 # This is remote-sim.o if a simulator is to be linked in.
 459 SIM_OBS = @SIM_OBS@
 460
 461 # Target-dependent object files.
 462 TARGET_OBS = @TARGET_OBS@
 463
 464 # All target-dependent objects files that require 64-bit CORE_ADDR
 465 # (used with --enable-targets=all --enable-64-bit-bfd).
 466 ALL_64_TARGET_OBS = \
 467         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 468         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 469         amd64fbsd-tdep.o amd64-dicos-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o \
 470         amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o \
 471         ia64-linux-tdep.o ia64-tdep.o \
 472         mips64obsd-tdep.o \
 473         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 474         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 475
 476 # All other target-dependent objects files (used with --enable-targets=all).
 477 ALL_TARGET_OBS = \
 478         armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
 479         arm-tdep.o arm-wince-tdep.o \
 480         avr-tdep.o \
 481         cris-tdep.o \
 482         dicos-tdep.o \
 483         frv-linux-tdep.o frv-tdep.o \
 484         h8300-tdep.o \
 485         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 486         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 487         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 488         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 489         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 490         i386-dicos-tdep.o \
 491         iq2000-tdep.o \
 492         linux-tdep.o \
 493         lm32-tdep.o \
 494         m32c-tdep.o \
 495         m32r-linux-tdep.o m32r-tdep.o \
 496         m68hc11-tdep.o \
 497         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 498         m88k-tdep.o \
 499         mep-tdep.o \
 500         mips-irix-tdep.o mips-linux-tdep.o \
 501         mipsnbsd-tdep.o mips-tdep.o \
 502         mn10300-linux-tdep.o mn10300-tdep.o \
 503         mt-tdep.o \
 504         nto-tdep.o \
 505         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 506         rs6000-aix-tdep.o rs6000-tdep.o \
 507         s390-tdep.o \
 508         score-tdep.o \
 509         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 510         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 511         sparc-sol2-tdep.o sparc-tdep.o \
 512         spu-tdep.o \
 513         v850-tdep.o \
 514         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 515         xstormy16-tdep.o \
 516         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 517         glibc-tdep.o \
 518         bsd-uthread.o \
 519         nbsd-tdep.o obsd-tdep.o \
 520         sol2-tdep.o \
 521         solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 522         solib-som.o solib-pa64.o \
 523         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 524         remote-m32r-sdi.o \
 525         xcoffread.o \
 526         prologue-value.o \
 527         symfile-mem.o \
 528         corelow.o \
 529         windows-tdep.o \
 530         linux-record.o
 531
 532 # Host-dependent makefile fragment comes in here.
 533 @host_makefile_frag@
 534 # End of host-dependent makefile fragment
 535
 536 FLAGS_TO_PASS = \
 537         "prefix=$(prefix)" \
 538         "exec_prefix=$(exec_prefix)" \
 539         "infodir=$(infodir)" \
 540         "datarootdir=$(datarootdir)" \
 541         "docdir=$(docdir)" \
 542         "htmldir=$(htmldir)" \
 543         "pdfdir=$(pdfdir)" \
 544         "libdir=$(libdir)" \
 545         "mandir=$(mandir)" \
 546         "datadir=$(datadir)" \
 547         "includedir=$(includedir)" \
 548         "against=$(against)" \
 549         "DESTDIR=$(DESTDIR)" \
 550         "AR=$(AR)" \
 551         "AR_FLAGS=$(AR_FLAGS)" \
 552         "CC=$(CC)" \
 553         "CFLAGS=$(CFLAGS)" \
 554         "CXX=$(CXX)" \
 555         "CXXFLAGS=$(CXXFLAGS)" \
 556         "DLLTOOL=$(DLLTOOL)" \
 557         "LDFLAGS=$(LDFLAGS)" \
 558         "RANLIB=$(RANLIB)" \
 559         "MAKEINFO=$(MAKEINFO)" \
 560         "MAKEHTML=$(MAKEHTML)" \
 561         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 562         "INSTALL=$(INSTALL)" \
 563         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 564         "INSTALL_DATA=$(INSTALL_DATA)" \
 565         "RUNTEST=$(RUNTEST)" \
 566         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 567
 568 # Flags that we pass when building the testsuite.
 569
 570 # empty for native, $(target_alias)/ for cross
 571 target_subdir = @target_subdir@
 572
 573 CC_FOR_TARGET = ` \
 574   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 575     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 576       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 577     else \
 578       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 579     fi; \
 580   else \
 581     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 582       echo $(CC); \
 583     else \
 584       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 585     fi; \
 586   fi`
 587
 588 CXX = gcc
 589 CXX_FOR_TARGET = ` \
 590   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 591     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 592       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 593     else \
 594       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 595     fi; \
 596   else \
 597     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 598       echo $(CXX); \
 599     else \
 600       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 601     fi; \
 602   fi`
 603
 604 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 605 # duplicating the lengthy definition.
 606 TARGET_FLAGS_TO_PASS = \
 607         "prefix=$(prefix)" \
 608         "exec_prefix=$(exec_prefix)" \
 609         "against=$(against)" \
 610         'CC=$$(CC_FOR_TARGET)' \
 611         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 612         "CFLAGS=$(CFLAGS)" \
 613         'CXX=$$(CXX_FOR_TARGET)' \
 614         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 615         "CXXFLAGS=$(CXXFLAGS)" \
 616         "INSTALL=$(INSTALL)" \
 617         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 618         "INSTALL_DATA=$(INSTALL_DATA)" \
 619         "MAKEINFO=$(MAKEINFO)" \
 620         "MAKEHTML=$(MAKEHTML)" \
 621         "RUNTEST=$(RUNTEST)" \
 622         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 623
 624 # All source files that go into linking GDB.
 625 # Links made at configuration time should not be specified here, since
 626 # SFILES is used in building the distribution archive.
 627
 628 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 629         addrmap.c \
 630         auxv.c ax-general.c ax-gdb.c \
 631         bcache.c \
 632         bfd-target.c \
 633         block.c blockframe.c breakpoint.c buildsym.c \
 634         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 635         charset.c cli-out.c coffread.c coff-pe-read.c \
 636         complaints.c completer.c corefile.c \
 637         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 638         cp-name-parser.y \
 639         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 640         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 641         elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \
 642         f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
 643         frame.c frame-base.c frame-unwind.c \
 644         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 645         inf-loop.c \
 646         infcall.c \
 647         infcmd.c inflow.c infrun.c \
 648         interps.c \
 649         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 650         language.c linespec.c \
 651         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 652         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 653         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 654         objc-exp.y objc-lang.c \
 655         objfiles.c osabi.c observer.c osdata.c \
 656         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 657         prologue-value.c \
 658         regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 659         scm-exp.c scm-lang.c scm-valprint.c \
 660         sentinel-frame.c \
 661         serial.c ser-base.c ser-unix.c \
 662         solib.c solib-null.c source.c \
 663         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 664         symtab.c \
 665         target.c target-descriptions.c target-memory.c \
 666         thread.c top.c tracepoint.c \
 667         trad-frame.c \
 668         tramp-frame.c \
 669         typeprint.c \
 670         ui-out.c utils.c ui-file.h ui-file.c \
 671         user-regs.c \
 672         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 673         wrapper.c \
 674         xml-tdesc.c xml-support.c \
 675         inferior.c gdb_usleep.c \
 676         record.c
 677
 678 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 679
 680 # Header files that need to have srcdir added.  Note that in the cases
 681 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 682 # so that each .h file is listed exactly once (M-x tags-search works
 683 # wrong if TAGS has files twice).  Because this is tricky to get
 684 # right, it is probably easiest just to list .h files here directly.
 685
 686 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 687 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 688 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 689 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 690 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 691 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 692 osf-share/cma_stack_int.h osf-share/cma_init.h \
 693 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 694 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 695 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h gnu-v2-abi.h \
 696 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
 697 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 698 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 699 c-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
 700 cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
 701 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 702 gnulib/string.in.h gnulib/str-two-way.h gnulib/extra/link-warning.h \
 703 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 704 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 705 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 706 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 707 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 708 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 709 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 710 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 711 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 712 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 713 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
 714 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 715 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 716 solib-target.h shnbsd-tdep.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 717 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 718 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 719 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 720 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 721 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 722 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 723 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 724 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 725 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 726 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 727 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 728 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 729 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 730 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 731 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 732 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 733 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 734 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 735 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
 736 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 737 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 738 regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-cygwin.h \
 739 config/i386/nm-linux64.h config/i386/nm-i386gnu.h \
 740 config/i386/nm-fbsd.h config/i386/nm-i386sol2.h config/i386/nm-linux.h \
 741 config/i386/nm-i386.h config/i386/nm-go32.h config/nm-nto.h \
 742 config/sparc/nm-sol2.h config/nm-linux.h config/mips/nm-irix5.h \
 743 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 744 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 745 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 746 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
 747 gdb_usleep.h
 748
 749 # Header files that already have srcdir in them, or which are in objdir.
 750
 751 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 752
 753
 754 # GDB "info" files, which should be included in their entirety
 755 INFOFILES = gdb.info*
 756
 757 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 758
 759 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 760 # default their values the way we do for SER_HARDWIRE; in the future
 761 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 762 # variables analogous to SER_HARDWIRE which get defaulted in this
 763 # Makefile.in
 764
 765 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 766            $(REMOTE_OBS) $(SIM_OBS)
 767
 768 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 769 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 770 # and it's more useful to see it in the .y file.
 771 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 772         $(CONFIG_SRCS)
 773 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 774
 775 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 776         version.o \
 777         annotate.o \
 778         addrmap.o \
 779         auxv.o \
 780         bfd-target.o \
 781         blockframe.o breakpoint.o findvar.o regcache.o \
 782         charset.o disasm.o dummy-frame.o dfp.o \
 783         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 784         block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
 785         infcall.o \
 786         infcmd.o infrun.o \
 787         expprint.o environ.o stack.o thread.o \
 788         exceptions.o \
 789         inf-child.o \
 790         interps.o \
 791         main.o \
 792         macrotab.o macrocmd.o macroexp.o macroscope.o \
 793         event-loop.o event-top.o inf-loop.o completer.o \
 794         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 795         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 796         findcmd.o \
 797         std-regs.o \
 798         signals.o \
 799         exec.o reverse.o \
 800         bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 801         dbxread.o coffread.o coff-pe-read.o \
 802         dwarf2read.o mipsread.o stabsread.o corefile.o \
 803         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 804         ada-lang.o c-lang.o f-lang.o objc-lang.o \
 805         ada-tasks.o \
 806         ui-out.o cli-out.o \
 807         varobj.o vec.o wrapper.o \
 808         jv-lang.o jv-valprint.o jv-typeprint.o \
 809         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 810         scm-exp.o scm-lang.o scm-valprint.o \
 811         sentinel-frame.o \
 812         complaints.o typeprint.o \
 813         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 814         ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
 815         serial.o mdebugread.o top.o utils.o \
 816         ui-file.o \
 817         user-regs.o \
 818         frame.o frame-unwind.o doublest.o \
 819         frame-base.o \
 820         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 821         cp-namespace.o \
 822         reggroups.o regset.o \
 823         trad-frame.o \
 824         tramp-frame.o \
 825         solib.o solib-null.o \
 826         prologue-value.o memory-map.o xml-support.o \
 827         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 828         inferior.o osdata.o gdb_usleep.o record.o
 829
 830 TSOBS = inflow.o
 831
 832 SUBDIRS = @subdirs@
 833 CLEANDIRS = $(SUBDIRS) gnulib
 834
 835 # For now, shortcut the "configure GDB for fewer languages" stuff.
 836 YYFILES = c-exp.c \
 837         cp-name-parser.c \
 838         objc-exp.c \
 839         ada-lex.c \
 840         ada-exp.c \
 841         jv-exp.c \
 842         f-exp.c m2-exp.c p-exp.c
 843 YYOBJ = c-exp.o \
 844         cp-name-parser.o \
 845         objc-exp.o \
 846         ada-exp.o \
 847         jv-exp.o \
 848         f-exp.o m2-exp.o p-exp.o
 849
 850 # Things which need to be built when making a distribution.
 851
 852 DISTSTUFF = $(YYFILES)
 853
 854
 855 # All generated files which can be included by another file.
 856 generated_files = config.h observer.h observer.inc ada-lex.c \
 857         $(GNULIB_H) $(NAT_GENERATED_FILES)
 858
 859 .c.o:
 860         $(COMPILE) $<
 861         $(POSTCOMPILE)
 862
 863 all: gdb$(EXEEXT) $(CONFIG_ALL)
 864         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 865 .PHONY: all-tui
 866 all-tui: $(TUI)$(EXEEXT)
 867
 868 installcheck:
 869
 870 # The check target can not use subdir_do, because subdir_do does not
 871 # use TARGET_FLAGS_TO_PASS.
 872 check: force
 873         @if [ -f testsuite/Makefile ]; then \
 874           rootme=`pwd`; export rootme; \
 875           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 876           cd testsuite; \
 877           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 878         else true; fi
 879
 880 # The idea is to parallelize testing of multilibs, for example:
 881 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 882 # will run 3 concurrent sessions of check, eventually testing all 10
 883 # combinations.  GNU make is required for the % pattern to work, as is
 884 # a shell that expands alternations within braces.  If GNU make is not
 885 # used, this rule will harmlessly fail to match.
 886 check//%: force
 887         @if [ -f testsuite/config.status ]; then \
 888           rootme=`pwd`; export rootme; \
 889           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 890           target=`echo "$@" | sed 's,//.*,,'`; \
 891           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 892           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 893           testdir=testsuite.$$vardots; \
 894           if [ ! -f $$testdir/Makefile ]; then \
 895             (cd testsuite && find . -name config.status) | \
 896             sed s,/config.status$$,, | sort | while read subdir; do \
 897               $(SHELL) $(srcdir)/../mkinstalldirs $$testdir/$$subdir && \
 898               (cd $$testdir/$$subdir && \
 899                $(SHELL) $$rootme/testsuite/$$subdir/config.status \
 900                  --recheck && \
 901                $(SHELL) ./config.status); done; \
 902           else :; fi && cd $$testdir && \
 903           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 904             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 905             "$$target"; \
 906         else true; fi
 907
 908 info install-info clean-info dvi pdf install-pdf html install-html: force
 909         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 910
 911 gdb.z:gdb.1
 912         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 913         pack gdb.t ; rm -f gdb.t
 914         mv gdb.t.z gdb.z
 915
 916 # Traditionally "install" depends on "all".  But it may be useful
 917 # not to; for example, if the user has made some trivial change to a
 918 # source file and doesn't care about rebuilding or just wants to save the
 919 # time it takes for make to check that all is up to date.
 920 # install-only is intended to address that need.
 921 install: all install-only
 922 install-only: $(CONFIG_INSTALL)
 923         transformed_name=`t='$(program_transform_name)'; \
 924                           echo gdb | sed -e "$$t"` ; \
 925                 if test "x$$transformed_name" = x; then \
 926                   transformed_name=gdb ; \
 927                 else \
 928                   true ; \
 929                 fi ; \
 930                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 931                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
 932                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 933                 $(SHELL) $(srcdir)/../mkinstalldirs \
 934                         $(DESTDIR)$(man1dir) ; \
 935                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
 936                         $(DESTDIR)$(man1dir)/$$transformed_name.1
 937         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 938 .PHONY: install-tui
 939 install-tui:
 940         transformed_name=`t='$(program_transform_name)'; \
 941                           echo $(TUI) | sed -e "$$t"` ; \
 942                 if test "x$$transformed_name" = x; then \
 943                   transformed_name=$(TUI) ; \
 944                 else \
 945                   true ; \
 946                 fi ; \
 947                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 948                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
 949                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 950                 $(SHELL) $(srcdir)/../mkinstalldirs \
 951                         $(DESTDIR)$(man1dir) ; \
 952                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
 953                         $(DESTDIR)$(man1dir)/$$transformed_name.1
 954
 955
 956 uninstall: force $(CONFIG_UNINSTALL)
 957         transformed_name=`t='$(program_transform_name)'; \
 958                           echo gdb | sed -e $$t` ; \
 959                 if test "x$$transformed_name" = x; then \
 960                   transformed_name=gdb ; \
 961                 else \
 962                   true ; \
 963                 fi ; \
 964                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
 965                       $(DESTDIR)$(man1dir)/$$transformed_name.1
 966         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 967 .PHONY: uninstall-tui
 968 uninstall-tui:
 969         transformed_name=`t='$(program_transform_name)'; \
 970                           echo $(TUI) | sed -e $$t` ; \
 971                 if test "x$$transformed_name" = x; then \
 972                   transformed_name=$(TUI) ; \
 973                 else \
 974                   true ; \
 975                 fi ; \
 976                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
 977                       $(DESTDIR)$(man1dir)/$$transformed_name.1
 978
 979 # The C++ name parser can be built standalone for testing.
 980 test-cp-name-parser.o: cp-name-parser.c
 981         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
 982         $(POSTCOMPILE)
 983
 984 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
 985         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
 986                 test-cp-name-parser.o $(LIBIBERTY)
 987
 988 # We do this by grepping through sources.  If that turns out to be too slow,
 989 # maybe we could just require every .o file to have an initialization routine
 990 # of a given name (top.o -> _initialize_top, etc.).
 991 #
 992 # Formatting conventions:  The name of the _initialize_* routines must start
 993 # in column zero, and must not be inside #if.
 994 #
 995 # Note that the set of files with init functions might change, or the names
 996 # of the functions might change, so this files needs to depend on all the
 997 # object files that will be linked into gdb.
 998
 999 # FIXME: There is a problem with this approach - init.c may force
1000 # unnecessary files to be linked in.
1001
1002 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1003 # the first call is to _initialize_gdbtypes (implemented by explicitly
1004 # putting that function's name first in the init.l-tmp file).  This is
1005 # a hack to ensure that all the architecture dependant global
1006 # builtin_type_* variables are initialized before anything else
1007 # (per-architecture code is called in the same order that it is
1008 # registered).  The ``correct fix'' is to have all the builtin types
1009 # made part of the architecture and initialize them on-demand (using
1010 # gdbarch_data) just like everything else.  The catch is that other
1011 # modules still take the address of these builtin types forcing them
1012 # to be variables, sigh!
1013
1014 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1015 # anchored on the first column and excludes the ``/'' character so
1016 # that it doesn't add the $(srcdir) prefix to any file that already
1017 # has an absolute path.  It turns out that $(DEC)'s True64 make
1018 # automatically adds the $(srcdir) prefixes when it encounters files
1019 # in sub-directories such as cli/ and mi/.
1020
1021 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1022 # duplicates.  Files in the gdb/ directory can end up appearing in
1023 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1024
1025 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1026 init.c: $(INIT_FILES)
1027         @echo Making init.c
1028         @rm -f init.c-tmp init.l-tmp
1029         @touch init.c-tmp
1030         @echo gdbtypes > init.l-tmp
1031         @-LANG=C ; export LANG ; \
1032         LC_ALL=C ; export LC_ALL ; \
1033         echo $(INIT_FILES) | \
1034         tr ' ' '\012' | \
1035         sed \
1036             -e '/^gdbtypes.[co]$$/d' \
1037             -e '/^init.[co]$$/d' \
1038             -e '/xdr_ld.[co]$$/d' \
1039             -e '/xdr_ptrace.[co]$$/d' \
1040             -e '/xdr_rdb.[co]$$/d' \
1041             -e '/udr.[co]$$/d' \
1042             -e '/udip2soc.[co]$$/d' \
1043             -e '/udi2go32.[co]$$/d' \
1044             -e '/version.[co]$$/d' \
1045             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1046             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1047             -e 's/\.[co]$$/.c/' \
1048             -e 's,signals\.c,common/signals\.c,' \
1049             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1050         while read f; do \
1051             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1052         done | \
1053         while read f; do \
1054             case " $$fs " in \
1055                 *" $$f "* ) ;; \
1056                 * ) echo $$f ; fs="$$fs $$f";; \
1057             esac; \
1058         done >> init.l-tmp
1059         @echo '/* Do not modify this file.  */' >>init.c-tmp
1060         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1061         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1062         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1063         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1064         @echo 'void' >>init.c-tmp
1065         @echo 'initialize_all_files (void)' >>init.c-tmp
1066         @echo '{' >>init.c-tmp
1067         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1068         @echo '}' >>init.c-tmp
1069         @rm init.l-tmp
1070         @mv init.c-tmp init.c
1071
1072 .PRECIOUS: init.c
1073
1074 # Removing the old gdb first works better if it is running, at least on SunOS.
1075 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1076         rm -f gdb$(EXEEXT)
1077         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1078                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1079                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1080
1081 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1082         rm -f $(TUI)$(EXEEXT)
1083         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1084                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1085                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1086
1087 # Convenience rule to handle recursion.
1088 $(LIBGNU) $(GNULIB_H): all-lib
1089 all-lib: gnulib/Makefile
1090         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1091 .PHONY: all-lib
1092
1093 # Create a library of the gdb object files and build GDB by linking
1094 # against that.
1095 #
1096 # init.o is very important.  It pulls in the rest of GDB.
1097 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1098 libgdb.a: $(LIBGDB_OBS)
1099         -rm -f libgdb.a
1100         $(AR) q libgdb.a $(LIBGDB_OBS)
1101         $(RANLIB) libgdb.a
1102
1103 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1104 # on itself without copying the executable.  So "make gdb1" will make
1105 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1106 # Removing gdb1 before the copy is the right thing if gdb1 is open
1107 # in another process.
1108 gdb1$(EXEEXT): gdb$(EXEEXT)
1109         rm -f gdb1$(EXEEXT)
1110         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1111
1112 # Put the proper machine-specific files first, so M-. on a machine
1113 # specific routine gets the one for the correct machine.  (FIXME: those
1114 # files go in twice; we should be removing them from the main list).
1115
1116 # TAGS depends on all the files that go into it so you can rebuild TAGS
1117 # with `make TAGS' and not have to say `rm TAGS' first.
1118
1119 GDB_NM_FILE = @GDB_NM_FILE@
1120 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1121         @echo Making TAGS
1122         @etags $(srcdir)/$(GDB_NM_FILE) \
1123         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1124                 echo $(srcdir)/$$i ; \
1125         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1126                 echo $$i ; \
1127         done) | sed -e 's/\.o$$/\.c/'` \
1128         `find $(srcdir)/config -name '*.h' -print`
1129
1130 tags: TAGS
1131
1132 clean mostlyclean: $(CONFIG_CLEAN)
1133         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1134         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1135         rm -f init.c version.c
1136         rm -f gdb$(EXEEXT) core make.log
1137         rm -f gdb[0-9]$(EXEEXT)
1138         rm -f test-cp-name-parser$(EXEEXT)
1139         rm -f xml-builtin.c stamp-xml
1140         rm -f $(DEPDIR)/*
1141
1142 .PHONY: clean-tui
1143 clean-tui:
1144         rm -f $(TUI)$(EXEEXT)
1145
1146 # This used to depend on c-exp.c m2-exp.c TAGS
1147 # I believe this is wrong; the makefile standards for distclean just
1148 # describe removing files; the only sort of "re-create a distribution"
1149 # functionality described is if the distributed files are unmodified.
1150 # NB: While GDBSERVER might be configured on native systems, it isn't
1151 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1152 distclean: clean
1153         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1154         rm -f gdbserver/config.status gdbserver/config.log
1155         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1156         rm -f gdbserver/Makefile gdbserver/config.cache
1157         rm -f nm.h config.status config.h stamp-h .gdbinit
1158         rm -f y.output yacc.acts yacc.tmp y.tab.h
1159         rm -f config.log config.cache
1160         rm -f Makefile
1161         rm -rf $(DEPDIR)
1162
1163 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1164 realclean: maintainer-clean
1165
1166 local-maintainer-clean:
1167         @echo "This command is intended for maintainers to use;"
1168         @echo "it deletes files that may require special tools to rebuild."
1169         rm -f c-exp.c \
1170                 cp-name-parser.c \
1171                 ada-lex.c ada-exp.c \
1172                 objc-exp.c \
1173                 jv-exp.tab \
1174                 f-exp.c m2-exp.c p-exp.c
1175         rm -f TAGS $(INFOFILES)
1176         rm -f $(YYFILES)
1177         rm -f nm.h config.status
1178
1179 do-maintainer-clean:
1180         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1181                 subdir_do
1182
1183 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1184         cd doc; $(MAKE) $(MFLAGS) diststuff
1185
1186 subdir_do: force
1187         @for i in $(DODIRS); do \
1188                 if [ -f ./$$i/Makefile ] ; then \
1189                         if (cd ./$$i; \
1190                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1191                         else exit 1 ; fi ; \
1192                 else true ; fi ; \
1193         done
1194
1195 Makefile: Makefile.in config.status @frags@
1196         # Regenerate the Makefile and the tm.h / nm.h links.
1197         CONFIG_FILES="Makefile" \
1198           CONFIG_COMMANDS= \
1199           CONFIG_HEADERS= \
1200           $(SHELL) config.status
1201
1202 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1203         CONFIG_FILES="gnulib/Makefile" \
1204           CONFIG_COMMANDS="depfiles" \
1205           CONFIG_HEADERS= \
1206           CONFIG_LINKS= \
1207           $(SHELL) config.status
1208
1209 config.h: stamp-h ; @true
1210 stamp-h: config.in config.status
1211         CONFIG_HEADERS=config.h:config.in \
1212           CONFIG_COMMANDS="default depdir" \
1213           CONFIG_FILES= \
1214           CONFIG_LINKS= \
1215           $(SHELL) config.status
1216
1217 config.status: configure configure.tgt configure.host
1218         $(SHELL) config.status --recheck
1219
1220 force:
1221
1222 # Documentation!
1223 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1224 doc/refcard.dvi:
1225         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1226
1227 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1228 doc/refcard.ps:
1229         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1230
1231 # GDB MANUAL: TeX dvi file
1232 doc/gdb.dvi:
1233         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1234
1235 # GDB MANUAL: info file
1236 doc/gdb.info:
1237         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1238
1239 # Make copying.c from COPYING
1240 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1241         awk -f $(srcdir)/copying.awk \
1242                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1243         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1244
1245 version.c: Makefile version.in
1246         rm -f version.c-tmp version.c
1247         echo '#include "version.h"' >> version.c-tmp
1248         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1249         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1250         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1251         mv version.c-tmp version.c
1252
1253 observer.h: observer.sh doc/observer.texi
1254         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1255
1256 observer.inc: observer.sh doc/observer.texi
1257         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1258
1259 lint: $(LINTFILES)
1260         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1261            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1262
1263 gdb.cxref: $(SFILES)
1264         cxref -I. $(SFILES) >gdb.cxref
1265
1266 force_update:
1267
1268 # GNU Make has an annoying habit of putting *all* the Makefile variables
1269 # into the environment, unless you include this target as a circumvention.
1270 # Rumor is that this will be fixed (and this target can be removed)
1271 # in GNU Make 4.0.
1272 .NOEXPORT:
1273
1274 # GNU Make 3.63 has a different problem: it keeps tacking command line
1275 # overrides onto the definition of $(MAKE).  This variable setting
1276 # will remove them.
1277 MAKEOVERRIDES=
1278
1279 ALLDEPFILES = \
1280         aix-thread.c \
1281         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1282         alpha-tdep.c alpha-mdebug-tdep.c \
1283         alpha-linux-tdep.c alpha-osf1-tdep.c \
1284         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1285         amd64-nat.c amd64-tdep.c \
1286         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1287         amd64nbsd-nat.c amd64nbsd-tdep.c \
1288         amd64obsd-nat.c amd64obsd-tdep.c \
1289         amd64-dicos-tdep.c \
1290         amd64-linux-nat.c amd64-linux-tdep.c \
1291         amd64-sol2-tdep.c \
1292         arm-linux-nat.c arm-linux-tdep.c arm-tdep.c \
1293         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1294         avr-tdep.c \
1295         bsd-uthread.c bsd-kvm.c \
1296         core-regset.c corelow.c \
1297         dcache.c dicos-tdep.c \
1298         exec.c \
1299         fbsd-nat.c \
1300         fork-child.c \
1301         glibc-tdep.c \
1302         go32-nat.c h8300-tdep.c \
1303         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1304         hppa-linux-tdep.c hppa-linux-nat.c \
1305         hppabsd-nat.c hppabsd-tdep.c \
1306         hppaobsd-tdep.c \
1307         hppanbsd-nat.c hppanbsd-tdep.c \
1308         i386-tdep.c i386-linux-nat.c \
1309         i386v4-nat.c i386-cygwin-tdep.c \
1310         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1311         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1312         i387-tdep.c \
1313         i386-dicos-tdep.c \
1314         i386-linux-tdep.c i386-nat.c \
1315         i386-sol2-nat.c i386-sol2-tdep.c \
1316         i386gnu-nat.c i386gnu-tdep.c \
1317         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1318         inf-ptrace.c inf-ttrace.c \
1319         irix5-nat.c \
1320         libunwind-frame.c \
1321         linux-fork.c \
1322         linux-tdep.c \
1323         linux-record.c \
1324         lm32-tdep.c \
1325         m68hc11-tdep.c \
1326         m32r-tdep.c \
1327         m32r-linux-nat.c m32r-linux-tdep.c \
1328         m68k-tdep.c \
1329         m68kbsd-nat.c m68kbsd-tdep.c \
1330         m68klinux-nat.c m68klinux-tdep.c \
1331         m88k-tdep.c m88kbsd-nat.c \
1332         mingw-hdep.c \
1333         mips-linux-nat.c mips-linux-tdep.c \
1334         mips-irix-tdep.c \
1335         mips-tdep.c \
1336         mipsnbsd-nat.c mipsnbsd-tdep.c \
1337         mips64obsd-nat.c mips64obsd-tdep.c \
1338         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1339         solib-osf.c \
1340         solib-target.c \
1341         somread.c solib-som.c \
1342         posix-hdep.c \
1343         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1344         ppcnbsd-nat.c ppcnbsd-tdep.c \
1345         ppcobsd-nat.c ppcobsd-tdep.c \
1346         procfs.c \
1347         remote-m32r-sdi.c remote-mips.c \
1348         remote-sim.c \
1349         dcache.c \
1350         rs6000-nat.c rs6000-tdep.c \
1351         s390-tdep.c s390-nat.c \
1352         score-tdep.c \
1353         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1354         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1355         sol2-tdep.c \
1356         solib-irix.c solib-svr4.c solib-sunos.c \
1357         sparc-linux-nat.c sparc-linux-tdep.c \
1358         sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1359         sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1360         sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1361         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1362         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1363         spu-linux-nat.c spu-tdep.c \
1364         v850-tdep.c \
1365         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1366         windows-nat.c windows-tdep.c \
1367         xcoffread.c xcoffsolib.c \
1368         xstormy16-tdep.c \
1369         xtensa-tdep.c xtensa-config.c \
1370         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1371
1372 # Some files need explicit build rules (due to -Werror problems) or due
1373 # to sub-directory fun 'n' games.
1374
1375 hpux-thread.o: $(srcdir)/hpux-thread.c
1376         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1377                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1378         $(POSTCOMPILE)
1379
1380 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1381 main.o: $(srcdir)/main.c
1382         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1383         $(POSTCOMPILE)
1384
1385 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1386 # errors.  It turns out that that is the least of monitor.c's
1387 # problems.  The function print_vsprintf appears to be using
1388 # va_arg(long) to extract CORE_ADDR parameters - something that
1389 # definitly will not work.  "monitor.c" needs to be rewritten so that
1390 # it doesn't use format strings and instead uses callbacks.
1391 monitor.o: $(srcdir)/monitor.c
1392         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1393         $(POSTCOMPILE)
1394
1395 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1396 # checks format strings.
1397 printcmd.o: $(srcdir)/printcmd.c
1398         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1399                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1400         $(POSTCOMPILE)
1401
1402 # Message files.  Based on code in gcc/Makefile.in.
1403
1404 # Rules for generating translated message descriptions.  Disabled by
1405 # autoconf if the tools are not available.
1406
1407 .SUFFIXES: .po .gmo .pox .pot
1408 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1409
1410 all-po: $(CATALOGS)
1411
1412 # This notation should be acceptable to all Make implementations used
1413 # by people who are interested in updating .po files.
1414 update-po: $(CATALOGS:.gmo=.pox)
1415
1416 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1417 # script does that.
1418 .po.gmo:
1419         -test -d po || mkdir po
1420         $(GMSGFMT) --statistics -o $@ $<
1421
1422 # The new .po has to be gone over by hand, so we deposit it into
1423 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1424 # exists, use it (it was just created), else use the one in srcdir.
1425 .po.pox:
1426         -test -d po || mkdir po
1427         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1428                         then echo po/$(PACKAGE).pot; \
1429                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1430
1431 # This rule has to look for .gmo modules in both srcdir and the cwd,
1432 # and has to check that we actually have a catalog for each language,
1433 # in case they weren't built or included with the distribution.
1434 install-po:
1435         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1436         cats="$(CATALOGS)"; for cat in $$cats; do \
1437           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1438           if [ -f $$cat ]; then :; \
1439           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1440           else continue; \
1441           fi; \
1442           dir=$(localedir)/$$lang/LC_MESSAGES; \
1443           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1444           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1445           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1446           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1447         done
1448 uninstall-po:
1449         cats="$(CATALOGS)"; for cat in $$cats; do \
1450           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1451           if [ -f $$cat ]; then :; \
1452           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1453           else continue; \
1454           fi; \
1455           dir=$(localedir)/$$lang/LC_MESSAGES; \
1456           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1457         done
1458 # Delete po/*.gmo only if we are not building in the source directory.
1459 clean-po:
1460         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1461
1462 # Rule for regenerating the message template (gdb.pot).  Instead of
1463 # forcing everyone to edit POTFILES.in, which proved impractical, this
1464 # rule has no dependencies and always regenerates gdb.pot.  This is
1465 # relatively harmless since the .po files do not directly depend on
1466 # it.  The .pot file is left in the build directory.  Since GDB's
1467 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1468 # files) force this rule.
1469 $(PACKAGE).pot: po/$(PACKAGE).pot
1470 po/$(PACKAGE).pot: force
1471         -test -d po || mkdir po
1472         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1473
1474
1475 #
1476 # YACC/LEX dependencies
1477 #
1478 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1479 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1480 # said LANG-exp.c rather than ./c-exp.c some makes would
1481 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1482 # decls for malloc/realloc/free which conflict with everything else.
1483 # Strictly speaking c-exp.c should therefore depend on
1484 # Makefile.in, but that was a pretty big annoyance.
1485
1486 .SUFFIXES: .y .l
1487 .y.c:
1488         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1489         -sed -e '/extern.*malloc/d' \
1490              -e '/extern.*realloc/d' \
1491              -e '/extern.*free/d' \
1492              -e '/include.*malloc.h/d' \
1493              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1494              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1495              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1496              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1497              -e '/^#line.*y.tab.c/d' \
1498           < $@.tmp > $@.new
1499         -rm $@.tmp
1500         mv $@.new ./$*.c
1501 .l.c:
1502         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1503             $(FLEX) -o$@ $< && \
1504             rm -f $@.new && \
1505             sed -e '/extern.*malloc/d' \
1506                 -e '/extern.*realloc/d' \
1507                 -e '/extern.*free/d' \
1508                 -e '/include.*malloc.h/d' \
1509                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1510                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1511                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1512                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1513                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1514               < $@ > $@.new && \
1515             rm -f $@ && \
1516             mv $@.new $@; \
1517         elif [ -f $@ ]; then \
1518             echo "Warning: $*.c older than $*.l and flex not available."; \
1519         else \
1520             echo "$@ missing and flex not available."; \
1521             false; \
1522         fi
1523
1524 .PRECIOUS: ada-exp.c ada-lex.c
1525 .PRECIOUS: c-exp.c
1526 .PRECIOUS: f-exp.c
1527 .PRECIOUS: jv-exp.c
1528 .PRECIOUS: m2-exp.c
1529 .PRECIOUS: objc-exp.c
1530 .PRECIOUS: p-exp.c
1531
1532 # XML rules
1533
1534 xml-builtin.c: stamp-xml; @true
1535 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1536         rm -f xml-builtin.tmp
1537         AWK="$(AWK)" \
1538           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1539           xml-builtin.tmp $(XMLFILES)
1540         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1541         echo stamp > stamp-xml
1542
1543 .PRECIOUS: xml-builtin.c
1544
1545 #
1546 # gdb/cli/ dependencies
1547 #
1548 # Need to explicitly specify the compile rule as make will do nothing
1549 # or try to compile the object file into the sub-directory.
1550
1551 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1552         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1553         $(POSTCOMPILE)
1554
1555 cli-decode.o: $(srcdir)/cli/cli-decode.c
1556         $(COMPILE) $(srcdir)/cli/cli-decode.c
1557         $(POSTCOMPILE)
1558
1559 cli-dump.o: $(srcdir)/cli/cli-dump.c
1560         $(COMPILE) $(srcdir)/cli/cli-dump.c
1561         $(POSTCOMPILE)
1562
1563 cli-interp.o: $(srcdir)/cli/cli-interp.c
1564         $(COMPILE) $(srcdir)/cli/cli-interp.c
1565         $(POSTCOMPILE)
1566
1567 cli-logging.o: $(srcdir)/cli/cli-logging.c
1568         $(COMPILE) $(srcdir)/cli/cli-logging.c
1569         $(POSTCOMPILE)
1570
1571 cli-script.o: $(srcdir)/cli/cli-script.c
1572         $(COMPILE) $(srcdir)/cli/cli-script.c
1573         $(POSTCOMPILE)
1574
1575 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1576         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1577         $(POSTCOMPILE)
1578
1579
1580 #
1581 # GDBTK sub-directory
1582 #
1583 # Need to explicitly specify the compile rule as make will do nothing
1584 # or try to compile the object file into the mi directory.
1585
1586 all-gdbtk: insight$(EXEEXT)
1587
1588 install-gdbtk:
1589         transformed_name=`t='$(program_transform_name)'; \
1590                   echo insight | sed -e $$t` ; \
1591         if test "x$$transformed_name" = x; then \
1592           transformed_name=insight ; \
1593         else \
1594           true ; \
1595         fi ; \
1596         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1597         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1598                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1599         $(SHELL) $(srcdir)/../mkinstalldirs \
1600                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1601         $(SHELL) $(srcdir)/../mkinstalldirs \
1602                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1603         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1604                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1605         $(SHELL) $(srcdir)/../mkinstalldirs \
1606                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1607                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1608         $(SHELL) $(srcdir)/../mkinstalldirs \
1609                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1610                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1611                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1612         cd $(srcdir)/gdbtk/library ; \
1613         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1614           do \
1615                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1616           done ;
1617
1618 uninstall-gdbtk:
1619         transformed_name=`t='$(program_transform_name)'; \
1620                   echo insight | sed -e $$t` ; \
1621         if test "x$$transformed_name" = x; then \
1622                 transformed_name=insight ; \
1623         else \
1624                 true ; \
1625         fi ; \
1626         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1627         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1628
1629 clean-gdbtk:
1630         rm -f insight$(EXEEXT)
1631
1632 # Removing the old gdb first works better if it is running, at least on SunOS.
1633 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1634                 $(CDEPS) $(TDEPLIBS)
1635         rm -f insight$(EXEEXT)
1636         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1637                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1638                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1639
1640 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1641         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1642
1643 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1644                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1645                 $(GDBTK_CFLAGS) \
1646                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1647                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1648
1649 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1650         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1651         $(POSTCOMPILE)
1652
1653 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1654         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1655         $(POSTCOMPILE)
1656
1657 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1658         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1659         $(POSTCOMPILE)
1660
1661 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1662         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1663         $(POSTCOMPILE)
1664
1665 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1666         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1667         $(POSTCOMPILE)
1668
1669 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1670         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1671         $(POSTCOMPILE)
1672
1673 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1674         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1675         $(POSTCOMPILE)
1676
1677 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1678         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1679         $(POSTCOMPILE)
1680
1681 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1682         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1683         $(POSTCOMPILE)
1684
1685 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1686         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1687         $(POSTCOMPILE)
1688
1689
1690 #
1691 # gdb/mi/ dependencies
1692 #
1693 # Need to explicitly specify the compile rule as make will do nothing
1694 # or try to compile the object file into the sub-directory.
1695
1696 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1697         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1698         $(POSTCOMPILE)
1699
1700 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1701         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1702         $(POSTCOMPILE)
1703
1704 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1705         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1706         $(POSTCOMPILE)
1707
1708 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1709         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1710         $(POSTCOMPILE)
1711
1712 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1713         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1714         $(POSTCOMPILE)
1715
1716 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1717         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1718         $(POSTCOMPILE)
1719
1720 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1721         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1722         $(POSTCOMPILE)
1723
1724 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1725         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1726         $(POSTCOMPILE)
1727
1728 mi-console.o: $(srcdir)/mi/mi-console.c
1729         $(COMPILE) $(srcdir)/mi/mi-console.c
1730         $(POSTCOMPILE)
1731
1732 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1733         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1734         $(POSTCOMPILE)
1735
1736 mi-interp.o: $(srcdir)/mi/mi-interp.c
1737         $(COMPILE) $(srcdir)/mi/mi-interp.c
1738         $(POSTCOMPILE)
1739
1740 mi-main.o: $(srcdir)/mi/mi-main.c
1741         $(COMPILE) $(srcdir)/mi/mi-main.c
1742         $(POSTCOMPILE)
1743
1744 mi-out.o: $(srcdir)/mi/mi-out.c
1745         $(COMPILE) $(srcdir)/mi/mi-out.c
1746         $(POSTCOMPILE)
1747
1748 mi-parse.o: $(srcdir)/mi/mi-parse.c
1749         $(COMPILE) $(srcdir)/mi/mi-parse.c
1750         $(POSTCOMPILE)
1751
1752 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1753         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1754         $(POSTCOMPILE)
1755
1756 mi-common.o: $(srcdir)/mi/mi-common.c
1757         $(COMPILE) $(srcdir)/mi/mi-common.c
1758         $(POSTCOMPILE)
1759
1760 #
1761 # gdb/common/ dependencies
1762 #
1763 # Need to explicitly specify the compile rule as make will do nothing
1764 # or try to compile the object file into the sub-directory.
1765
1766 signals.o: $(srcdir)/common/signals.c
1767         $(COMPILE) $(srcdir)/common/signals.c
1768         $(POSTCOMPILE)
1769
1770 #
1771 # gdb/tui/ dependencies
1772 #
1773 # Need to explicitly specify the compile rule as make will do nothing
1774 # or try to compile the object file into the sub-directory.
1775
1776 tui.o: $(srcdir)/tui/tui.c
1777         $(COMPILE) $(srcdir)/tui/tui.c
1778         $(POSTCOMPILE)
1779
1780 tui-command.o: $(srcdir)/tui/tui-command.c
1781         $(COMPILE) $(srcdir)/tui/tui-command.c
1782         $(POSTCOMPILE)
1783
1784 tui-data.o: $(srcdir)/tui/tui-data.c
1785         $(COMPILE) $(srcdir)/tui/tui-data.c
1786         $(POSTCOMPILE)
1787
1788 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1789         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1790         $(POSTCOMPILE)
1791
1792 tui-file.o: $(srcdir)/tui/tui-file.c
1793         $(COMPILE) $(srcdir)/tui/tui-file.c
1794         $(POSTCOMPILE)
1795
1796 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1797         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1798         $(POSTCOMPILE)
1799
1800 tui-interp.o: $(srcdir)/tui/tui-interp.c
1801         $(COMPILE) $(srcdir)/tui/tui-interp.c
1802         $(POSTCOMPILE)
1803
1804 tui-io.o: $(srcdir)/tui/tui-io.c
1805         $(COMPILE) $(srcdir)/tui/tui-io.c
1806         $(POSTCOMPILE)
1807
1808 tui-layout.o: $(srcdir)/tui/tui-layout.c
1809         $(COMPILE) $(srcdir)/tui/tui-layout.c
1810         $(POSTCOMPILE)
1811
1812 tui-main.o: $(srcdir)/tui/tui-main.c
1813         $(COMPILE) $(srcdir)/tui/tui-main.c
1814         $(POSTCOMPILE)
1815
1816 tui-out.o: $(srcdir)/tui/tui-out.c
1817         $(COMPILE) $(srcdir)/tui/tui-out.c
1818         $(POSTCOMPILE)
1819
1820 tui-regs.o: $(srcdir)/tui/tui-regs.c
1821         $(COMPILE) $(srcdir)/tui/tui-regs.c
1822         $(POSTCOMPILE)
1823
1824 tui-source.o: $(srcdir)/tui/tui-source.c
1825         $(COMPILE) $(srcdir)/tui/tui-source.c
1826         $(POSTCOMPILE)
1827
1828 tui-stack.o: $(srcdir)/tui/tui-stack.c
1829         $(COMPILE) $(srcdir)/tui/tui-stack.c
1830         $(POSTCOMPILE)
1831
1832 tui-win.o: $(srcdir)/tui/tui-win.c
1833         $(COMPILE) $(srcdir)/tui/tui-win.c
1834         $(POSTCOMPILE)
1835
1836 tui-windata.o: $(srcdir)/tui/tui-windata.c
1837         $(COMPILE) $(srcdir)/tui/tui-windata.c
1838         $(POSTCOMPILE)
1839
1840 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1841         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1842         $(POSTCOMPILE)
1843
1844 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1845         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1846         $(POSTCOMPILE)
1847
1848 #
1849 # gdb/python/ dependencies
1850 #
1851 # Need to explicitly specify the compile rule as make will do nothing
1852 # or try to compile the object file into the sub-directory.
1853
1854 # Flags needed to compile Python code
1855 PYTHON_CFLAGS=@PYTHON_CFLAGS@
1856
1857 python.o: $(srcdir)/python/python.c
1858         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
1859         $(POSTCOMPILE)
1860
1861 python-cmd.o: $(srcdir)/python/python-cmd.c
1862         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-cmd.c
1863         $(POSTCOMPILE)
1864
1865 python-frame.o: $(srcdir)/python/python-frame.c
1866         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-frame.c
1867         $(POSTCOMPILE)
1868
1869 python-function.o: $(srcdir)/python/python-function.c
1870         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-function.c
1871         $(POSTCOMPILE)
1872
1873 python-objfile.o: $(srcdir)/python/python-objfile.c
1874         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-objfile.c
1875         $(POSTCOMPILE)
1876
1877 python-prettyprint.o: $(srcdir)/python/python-prettyprint.c
1878         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-prettyprint.c
1879         $(POSTCOMPILE)
1880
1881 python-type.o: $(srcdir)/python/python-type.c
1882         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-type.c
1883         $(POSTCOMPILE)
1884
1885 python-utils.o: $(srcdir)/python/python-utils.c
1886         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-utils.c
1887         $(POSTCOMPILE)
1888
1889 python-value.o: $(srcdir)/python/python-value.c
1890         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-value.c
1891         $(POSTCOMPILE)
1892
1893 #
1894 # Dependency tracking.  Most of this is conditional on GNU Make being
1895 # found by configure; if GNU Make is not found, we fall back to a
1896 # simpler scheme.
1897 #
1898
1899 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
1900 # Note that we put the dependencies into a .Tpo file, then move them
1901 # into place if the compile succeeds.  We need this because gcc does
1902 # not atomically write the dependency output file.
1903 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
1904 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
1905 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
1906 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
1907 @GMAKE_TRUE@else
1908 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
1909 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
1910 # depcomp handles atomicity for us, so we don't need a postcompile
1911 # step.
1912 @GMAKE_TRUE@override POSTCOMPILE =
1913 @GMAKE_TRUE@endif
1914
1915 # A list of all the objects we might care about in this build, for
1916 # dependency tracking.
1917 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
1918         test-cp-name-parser.o
1919
1920 # Ensure that generated files are created early.  Use order-only
1921 # dependencies if available.  They require GNU make 3.80 or newer,
1922 # and the .VARIABLES variable was introduced at the same time.
1923 @GMAKE_TRUE@ifdef .VARIABLES
1924 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
1925 @GMAKE_TRUE@else
1926 $(all_object_files) : $(generated_files)
1927 @GMAKE_TRUE@endif
1928
1929 # Dependencies.
1930 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
1931
1932 ### end of the gdb Makefile.in.