1 # Copyright (C) 1989-2013 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 # This can be referenced by `LIBINTL' as computed by
48 # ZW_GNU_GETTEXT_SISTER_DIR.
58 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
59 INSTALL_DATA
= @INSTALL_DATA@
77 # If you are compiling with GCC, make sure that either 1) You have the
78 # fixed include files where GCC can reach them, or 2) You use the
79 # -traditional flag. Otherwise the ioctl calls in inflow.c
80 # will be incorrectly compiled. The "fixincludes" script in the gcc
81 # distribution will fix your include files up.
84 # Dependency tracking information.
87 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
89 # Note that these are overridden by GNU make-specific code below if
90 # GNU make is used. The overrides implement dependency tracking.
92 COMPILE.post
= -c
-o
$@
93 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
96 # Directory containing source files.
102 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
103 # not defined, but ada-lex.c is present, compilation will continue,
104 # possibly with a warning.
107 YLWRAP
= $(srcdir)/..
/ylwrap
109 # where to find makeinfo, preferably one designed for texinfo-2
110 MAKEINFO
= @MAKEINFO@
111 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
112 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
113 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
115 MAKEHTML
= $(MAKEINFO_CMD
) --html
118 # Set this up with gcc if you have gnu ld and the loader will print out
119 # line numbers for undefined references.
123 # Where is our "include" directory? Typically $(srcdir)/../include.
124 # This is essentially the header file directory for the library
125 # routines in libiberty.
126 INCLUDE_DIR
= $(srcdir)/..
/include
127 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
129 # Where is the "-liberty" library? Typically in ../libiberty.
130 LIBIBERTY
= ..
/libiberty
/libiberty.a
132 # Where is the BFD library? Typically in ../bfd.
134 BFD
= $(BFD_DIR
)/libbfd.a
135 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
136 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
138 # Where is the decnumber library? Typically in ../libdecnumber.
139 LIBDECNUMBER_DIR
= ..
/libdecnumber
140 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
141 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
142 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
144 # Where is the READLINE library? Typically in ../readline.
145 READLINE_DIR
= ..
/readline
146 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
147 READLINE
= @READLINE@
148 READLINE_DEPS
= @READLINE_DEPS@
149 READLINE_CFLAGS
= @READLINE_CFLAGS@
151 # Where is expat? This will be empty if expat was not available.
152 LIBEXPAT
= @LIBEXPAT@
154 # Where is lzma? This will be empty if lzma was not available.
157 # Where is libbabeltrace? This will be empty if lbabeltrace was not
159 LIBBABELTRACE
= @LIBBABELTRACE@
161 WARN_CFLAGS
= @WARN_CFLAGS@
162 WERROR_CFLAGS
= @WERROR_CFLAGS@
163 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
164 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
166 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
167 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
168 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
169 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
171 RDYNAMIC
= @RDYNAMIC@
173 # Where is the INTL library? Typically in ../intl.
175 INTL_DEPS
= @LIBINTL_DEP@
176 INTL_CFLAGS
= @INCINTL@
178 # Did the user give us a --with-gdb-datadir option?
179 GDB_DATADIR
= @GDB_DATADIR@
181 # Helper code from gnulib.
182 GNULIB_BUILDDIR
= build-gnulib
183 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
184 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
186 # Generated headers in the gnulib directory. These must be listed
187 # so that they are generated before other files are compiled.
188 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
191 # CLI sub directory definitons
195 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
197 cli-interp.o cli-utils.o
200 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
202 cli
/cli-interp.c cli
/cli-utils.c
208 # MI sub directory definitons
211 mi-out.o mi-console.o \
212 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
213 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
214 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
215 mi-cmd-info.o mi-interp.o \
216 mi-main.o mi-parse.o mi-getopt.o
218 mi
/mi-out.c mi
/mi-console.c \
219 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
220 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
221 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
222 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
223 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
229 # TUI sub directory definitions
266 tui
/tui-wingeneral.c \
267 tui
/tui-winsource.c \
276 # python sub directory definitons
278 SUBDIR_PYTHON_OBS
= \
291 py-finishbreakpoint.o \
299 py-newobjfileevent.o \
313 SUBDIR_PYTHON_SRCS
= \
316 python
/py-auto-load.c \
318 python
/py-bpevent.c \
319 python
/py-breakpoint.c \
321 python
/py-continueevent.c \
323 python
/py-evtregistry.c \
325 python
/py-exitedevent.c \
326 python
/py-finishbreakpoint.c \
328 python
/py-framefilter.c \
329 python
/py-function.c \
330 python
/py-gdb-readline.c \
331 python
/py-inferior.c \
332 python
/py-infthread.c \
333 python
/py-lazy-string.c \
334 python
/py-newobjfileevent.c \
335 python
/py-objfile.c \
337 python
/py-prettyprint.c \
338 python
/py-progspace.c \
339 python
/py-signalevent.c \
340 python
/py-stopevent.c \
343 python
/py-threadevent.c \
348 SUBDIR_PYTHON_LDFLAGS
=
349 SUBDIR_PYTHON_CFLAGS
=
351 # Opcodes currently live in one of two places. Either they are in the
352 # opcode library, typically ../opcodes, or they are in a header file
354 # Where is the "-lopcodes" library, with (some of) the opcode tables and
356 OPCODES_DIR
= ..
/opcodes
357 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
358 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
359 # Where are the other opcode tables which only have header file
361 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
362 # Some source files like to use #include "opcodes/file.h"
363 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
365 # The simulator is usually nonexistent; targets that include one
366 # should set this to list all the .o or .a files to be linked in.
369 WIN32LIBS
= @WIN32LIBS@
371 # Tcl et al cflags and libraries
373 TCL_CFLAGS
= @TCL_INCLUDE@
374 GDBTKLIBS
= @GDBTKLIBS@
375 # Extra flags that the GDBTK files need:
376 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
379 TK_CFLAGS
= @TK_INCLUDE@
381 X11_CFLAGS
= @TK_XINCLUDES@
385 WIN32LDAPP
= @WIN32LDAPP@
388 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
389 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
391 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
393 # The version of gdbtk we're building. This should be kept
394 # in sync with GDBTK_VERSION and friends in gdbtk.h.
396 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
398 # Gdbtk requires an absolute path to the source directory or
399 # the testsuite won't run properly.
400 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
403 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
404 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
405 SUBDIR_GDBTK_SRCS
= \
406 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
407 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
408 gdbtk
/generic
/gdbtk-interp.c \
409 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
410 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
411 gdbtk
/generic
/gdbtk-main.c
412 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
413 SUBDIR_GDBTK_LDFLAGS
=
414 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
416 CONFIG_OBS
= @CONFIG_OBS@
417 CONFIG_SRCS
= @CONFIG_SRCS@
418 CONFIG_DEPS
= @CONFIG_DEPS@
419 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
420 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
421 CONFIG_ALL
= @CONFIG_ALL@
422 CONFIG_CLEAN
= @CONFIG_CLEAN@
423 CONFIG_INSTALL
= @CONFIG_INSTALL@
424 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
425 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
427 # -I. for config files.
428 # -I$(srcdir) for gdb internal headers.
429 # -I$(srcdir)/config for more generic config files.
431 # It is also possible that you will need to add -I/usr/include/sys if
432 # your system doesn't have fcntl.h in /usr/include (which is where it
433 # should be according to Posix).
435 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
436 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
438 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
439 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
441 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
443 # CFLAGS is specifically reserved for setting from the command line
444 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
447 # Set by configure, for e.g. expat. Python installations are such that
448 # C headers are included using their basename (for example, we #include
449 # <Python.h> rather than, say, <python/Python.h>). Since the file names
450 # are sometimes a little generic, we think that the risk of collision
451 # with other header files is high. If that happens, we try to mitigate
452 # a bit the consequences by putting the Python includes last in the list.
453 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @PYTHON_CPPFLAGS@
455 # Need to pass this to testsuite for "make check". Probably should be
456 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
457 # so "make check" has the same result no matter where it is run.
460 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
461 INTERNAL_CFLAGS_BASE
= \
462 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
463 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
464 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
465 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
466 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
467 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
469 # LDFLAGS is specifically reserved for setting from the command line
473 # Profiling options need to go here to work.
474 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
475 # and have it work; that's why CFLAGS is here.
476 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
477 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
479 # If your system is missing alloca(), or, more likely, it's there but
480 # it doesn't work, then refer to libiberty.
482 # Libraries and corresponding dependencies for compiling gdb.
483 # XM_CLIBS, defined in *config files, have host-dependent libs.
484 # LIBIBERTY appears twice on purpose.
485 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
486 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ @PYTHON_LIBS@ \
487 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) \
488 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
489 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
490 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
492 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
493 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
498 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
499 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
505 # XML files to build in to GDB.
506 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
507 $(srcdir)/features
/library-list.dtd \
508 $(srcdir)/features
/library-list-aix.dtd \
509 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
510 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd \
511 $(srcdir)/features
/btrace.dtd
513 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
514 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
515 # etc., then there will be (as part of the C library or perhaps as
516 # part of libiberty) a POSIX interface. But at least for now the
517 # host-dependent makefile fragment might need to use something else
519 SER_HARDWIRE
= @SER_HARDWIRE@
521 # The `remote' debugging target is supported for most architectures,
522 # but not all (e.g. 960)
523 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
526 # This is remote-sim.o if a simulator is to be linked in.
529 # Target-dependent object files.
530 TARGET_OBS
= @TARGET_OBS@
532 # All target-dependent objects files that require 64-bit CORE_ADDR
533 # (used with --enable-targets=all --enable-64-bit-bfd).
534 ALL_64_TARGET_OBS
= \
535 aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
536 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
537 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
538 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
539 amd64-linux-tdep.o amd64nbsd-tdep.o \
540 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
541 ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
543 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
544 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
546 # All other target-dependent objects files (used with --enable-targets=all).
548 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
549 armnbsd-tdep.o armobsd-tdep.o \
550 arm-tdep.o arm-wince-tdep.o \
552 bfin-linux-tdep.o bfin-tdep.o \
553 cris-linux-tdep.o cris-tdep.o \
555 frv-linux-tdep.o frv-tdep.o \
557 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
558 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
559 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
560 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
561 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
562 i386-dicos-tdep.o i386-darwin-tdep.o \
567 m32r-linux-tdep.o m32r-tdep.o \
569 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
572 microblaze-tdep.o microblaze-linux-tdep.o \
573 mips-irix-tdep.o mips-linux-tdep.o \
574 mipsnbsd-tdep.o mips-tdep.o \
575 mn10300-linux-tdep.o mn10300-tdep.o \
579 nios2-tdep.o nios2-linux-tdep.o \
581 ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
582 ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
583 rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
584 rs6000-lynx178-tdep.o \
588 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
589 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
590 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
591 spu-tdep.o spu-multiarch.o solib-spu.o \
592 tic6x-tdep.o tic6x-linux-tdep.o \
593 tilegx-tdep.o tilegx-linux-tdep.o \
595 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
597 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
600 nbsd-tdep.o obsd-tdep.o \
602 solib-frv.o solib-irix.o solib-svr4.o \
603 solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
604 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
605 remote-m32r-sdi.o remote-mips.o \
612 # Host-dependent makefile fragment comes in here.
614 # End of host-dependent makefile fragment
618 "exec_prefix=$(exec_prefix)" \
619 "infodir=$(infodir)" \
620 "datarootdir=$(datarootdir)" \
622 "htmldir=$(htmldir)" \
626 "datadir=$(datadir)" \
627 "includedir=$(includedir)" \
628 "against=$(against)" \
629 "DESTDIR=$(DESTDIR)" \
631 "AR_FLAGS=$(AR_FLAGS)" \
635 "CXXFLAGS=$(CXXFLAGS)" \
636 "DLLTOOL=$(DLLTOOL)" \
637 "LDFLAGS=$(LDFLAGS)" \
639 "MAKEINFO=$(MAKEINFO)" \
640 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
641 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
642 "MAKEHTML=$(MAKEHTML)" \
643 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
644 "INSTALL=$(INSTALL)" \
645 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
646 "INSTALL_DATA=$(INSTALL_DATA)" \
647 "RUNTEST=$(RUNTEST)" \
648 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
650 # Flags that we pass when building the testsuite.
652 # empty for native, $(target_alias)/ for cross
653 target_subdir
= @target_subdir@
656 if [ -f $${rootme}/../gcc/xgcc ] ; then \
657 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
658 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
660 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
663 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
666 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
672 if [ -f $${rootme}/../gcc/xgcc ] ; then \
673 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
674 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
676 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
679 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
682 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
686 # The use of $$(x_FOR_TARGET) reduces the command line length by not
687 # duplicating the lengthy definition.
688 TARGET_FLAGS_TO_PASS
= \
690 "exec_prefix=$(exec_prefix)" \
691 "against=$(against)" \
692 'CC=$$(CC_FOR_TARGET)' \
693 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
695 'CXX=$$(CXX_FOR_TARGET)' \
696 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
697 "CXXFLAGS=$(CXXFLAGS)" \
698 "INSTALL=$(INSTALL)" \
699 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
700 "INSTALL_DATA=$(INSTALL_DATA)" \
701 "MAKEINFO=$(MAKEINFO)" \
702 "MAKEHTML=$(MAKEHTML)" \
703 "RUNTEST=$(RUNTEST)" \
704 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
705 "FORCE_PARALLEL=$(FORCE_PARALLEL)"
707 # All source files that go into linking GDB.
708 # Links made at configuration time should not be specified here, since
709 # SFILES is used in building the distribution archive.
711 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
713 addrmap.c auto-load.c \
714 auxv.c ax-general.c ax-gdb.c \
718 block.c blockframe.c \
719 breakpoint.c break-catch-sig.c break-catch-throw.c \
721 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
722 charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
723 complaints.c completer.c continuations.c corefile.c corelow.c \
724 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
725 d-lang.c d-valprint.c \
727 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
728 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
729 dwarf2-frame-tailcall.c \
730 elfread.c environ.c eval.c event-loop.c event-top.c \
731 exceptions.c expprint.c \
732 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
733 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
734 gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
735 gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
736 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
739 infcmd.c inflow.c infrun.c \
742 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
743 language.c linespec.c minidebug.c \
744 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
745 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
746 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
747 memrange.c mi
/mi-common.c \
749 objfiles.c osabi.c observer.c osdata.c \
751 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
752 proc-service.list progspace.c \
753 prologue-value.c psymtab.c \
754 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
756 serial.c ser-base.c ser-unix.c skip.c \
757 solib.c solib-target.c source.c \
758 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
759 symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
760 target.c target-descriptions.c target-memory.c \
761 thread.c top.c tracepoint.c \
765 ui-out.c utils.c ui-file.h ui-file.c \
767 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
768 xml-tdesc.c xml-support.c \
769 inferior.c gdb_usleep.c \
770 record.c record-full.c gcore.c \
773 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
774 regset.c sol-thread.c windows-termcap.c \
775 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
776 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
777 common
/format.c common
/filestuff.c btrace.c record-btrace.c ctf.c \
780 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
782 # Header files that need to have srcdir added. Note that in the cases
783 # where we use a macro like $(gdbcmd_h), things are carefully arranged
784 # so that each .h file is listed exactly once (M-x tags-search works
785 # wrong if TAGS has files twice). Because this is tricky to get
786 # right, it is probably easiest just to list .h files here directly.
789 common
/gdb_signals.h common
/gdb_thread_db.h common
/gdb_vecs.h \
790 common
/i386-xstate.h common
/linux-ptrace.h common
/mips-linux-watch.h \
791 proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
792 ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
793 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
794 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
795 ia64-tdep.h ada-lang.h ada-varobj.h varobj.h frv-tdep.h nto-tdep.h serial.h \
796 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
797 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h \
798 cli
/cli-script.h macrotab.h symtab.h common
/version.h \
799 gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
800 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
801 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
802 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
803 gdbarch.h bsd-uthread.h common
/gdb_stat.h memory-map.h memrange.h \
804 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
805 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
806 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
807 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
808 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
809 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
810 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
811 m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
812 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
813 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
814 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
815 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
816 tui
/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
817 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
818 typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
819 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
820 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
821 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
822 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
823 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
824 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
825 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
826 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
827 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
828 rs6000-tdep.h rs6000-aix-tdep.h \
829 common
/gdb_locale.h common
/gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
830 language.h nbsd-tdep.h solib-svr4.h \
831 macroexp.h ui-file.h regcache.h tracepoint.h i386-tdep.h \
832 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
833 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
834 config
/i386
/nm-fbsd.h \
835 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
836 top.h bsd-kvm.h gdb-stabs.h reggroups.h \
837 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
838 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
839 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
840 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
841 psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
842 amd64-darwin-tdep.h charset-list.h \
843 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
844 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
845 i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
846 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
847 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
848 record-full.h solib-aix.h \
849 solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
850 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
851 gnulib
/import
/extra
/snippet
/warn-on-use.h \
852 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
853 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
854 common
/format.h common
/host-defs.h utils.h common
/queue.h common
/gdb_string.h \
855 common
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
856 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common
/linux-btrace.h \
857 ctf.h common
/i386-cpuid.h common
/i386-gcc-cpuid.h target
/resume.h \
858 target
/wait.h target
/waitstatus.h nat
/linux-nat.h nat
/linux-waitpid.h
860 # Header files that already have srcdir in them, or which are in objdir.
862 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
865 # GDB "info" files, which should be included in their entirety
866 INFOFILES
= gdb.
info*
868 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
870 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
871 # default their values the way we do for SER_HARDWIRE; in the future
872 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
873 # variables analogous to SER_HARDWIRE which get defaulted in this
876 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
877 $(REMOTE_OBS
) $(SIM_OBS
)
879 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
880 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
881 # and it's more useful to see it in the .y file.
882 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
884 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
886 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
893 blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
894 findvar.o regcache.o cleanups.o \
895 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
896 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
897 block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
898 linespec.o dictionary.o \
901 expprint.o environ.o stack.o thread.o \
909 macrotab.o macrocmd.o macroexp.o macroscope.o \
911 event-loop.o event-top.o inf-loop.o completer.o \
912 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
914 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
919 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
920 dbxread.o coffread.o coff-pe-read.o \
921 dwarf2read.o mipsread.o stabsread.o corefile.o \
922 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
923 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
924 ada-tasks.o ada-varobj.o \
927 go-lang.o go-valprint.o go-typeprint.o \
928 jv-lang.o jv-valprint.o jv-typeprint.o \
929 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
931 complaints.o typeprint.o \
932 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
933 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
935 serial.o mdebugread.o top.o utils.o \
938 frame.o frame-unwind.o doublest.o \
941 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
943 reggroups.o regset.o \
946 solib.o solib-target.o \
947 prologue-value.o memory-map.o memrange.o \
948 xml-support.o xml-syscall.o xml-utils.o \
949 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
950 inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
951 gdb_vecs.o jit.o progspace.o skip.o probe.o \
952 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
953 format.o registry.o btrace.o record-btrace.o waitstatus.o
957 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
958 CLEANDIRS
= $(SUBDIRS
)
960 # List of subdirectories in the build tree that must exist.
961 # This is used to force build failures in existing trees when
962 # a new directory is added.
963 # The format here is for the `case' shell command.
964 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
966 # For now, shortcut the "configure GDB for fewer languages" stuff.
972 f-exp.c go-exp.c m2-exp.c p-exp.c
977 f-exp.o go-exp.o m2-exp.o p-exp.o
979 # Things which need to be built when making a distribution.
981 DISTSTUFF
= $(YYFILES
)
984 # All generated files which can be included by another file.
985 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
986 $(GNULIB_H
) $(NAT_GENERATED_FILES
) gcore
992 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
993 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
997 # The check target can not use subdir_do, because subdir_do does not
998 # use TARGET_FLAGS_TO_PASS.
1000 @if
[ -f testsuite
/Makefile
]; then \
1001 rootme
=`pwd`; export rootme
; \
1002 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1004 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1007 # The idea is to parallelize testing of multilibs, for example:
1008 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1009 # will run 3 concurrent sessions of check, eventually testing all 10
1010 # combinations. GNU make is required for the % pattern to work, as is
1011 # a shell that expands alternations within braces. If GNU make is not
1012 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1013 # prevent serialized checking due to the passed RUNTESTFLAGS.
1014 # FIXME: use config.status --config not --version, when available.
1016 @if
[ -f testsuite
/config.status
]; then \
1017 rootme
=`pwd`; export rootme
; \
1018 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1019 target
=`echo "$@" | sed 's,//.*,,'`; \
1020 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1021 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1022 testdir
=testsuite.
$$vardots; \
1023 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1024 configargs
=`cd testsuite && ./config.status --version | \
1025 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1026 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1028 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1029 "\"--srcdir=\$$rootsrc/testsuite\"" \
1031 else :; fi
&& cd
$$testdir && \
1032 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1033 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1034 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1038 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1039 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1041 # Traditionally "install" depends on "all". But it may be useful
1042 # not to; for example, if the user has made some trivial change to a
1043 # source file and doesn't care about rebuilding or just wants to save the
1044 # time it takes for make to check that all is up to date.
1045 # install-only is intended to address that need.
1047 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1049 install-only
: $(CONFIG_INSTALL
)
1050 transformed_name
=`t='$(program_transform_name)'; \
1051 echo gdb | sed -e "$$t"` ; \
1052 if
test "x$$transformed_name" = x
; then \
1053 transformed_name
=gdb
; \
1057 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1058 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1059 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1060 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1061 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1062 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1064 transformed_name
=`t='$(program_transform_name)'; \
1065 echo gcore | sed -e "$$t"` ; \
1066 if
test "x$$transformed_name" = x
; then \
1067 transformed_name
=gcore
; \
1071 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1072 $(INSTALL_PROGRAM
) gcore \
1073 $(DESTDIR
)$(bindir)/$$transformed_name; \
1075 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1078 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1080 uninstall: force $(CONFIG_UNINSTALL
)
1081 transformed_name
=`t='$(program_transform_name)'; \
1082 echo gdb | sed -e $$t` ; \
1083 if
test "x$$transformed_name" = x
; then \
1084 transformed_name
=gdb
; \
1088 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1089 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1090 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1092 transformed_name
=`t='$(program_transform_name)'; \
1093 echo gcore | sed -e "$$t"` ; \
1094 if
test "x$$transformed_name" = x
; then \
1095 transformed_name
=gcore
; \
1099 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1101 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1103 # The C++ name parser can be built standalone for testing.
1104 test-cp-name-parser.o
: cp-name-parser.c
1105 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1108 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1109 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1110 test-cp-name-parser.o
$(LIBIBERTY
)
1112 # We do this by grepping through sources. If that turns out to be too slow,
1113 # maybe we could just require every .o file to have an initialization routine
1114 # of a given name (top.o -> _initialize_top, etc.).
1116 # Formatting conventions: The name of the _initialize_* routines must start
1117 # in column zero, and must not be inside #if.
1119 # Note that the set of files with init functions might change, or the names
1120 # of the functions might change, so this files needs to depend on all the
1121 # object files that will be linked into gdb.
1123 # FIXME: There is a problem with this approach - init.c may force
1124 # unnecessary files to be linked in.
1126 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1127 # the first call is to _initialize_gdbtypes (implemented by explicitly
1128 # putting that function's name first in the init.l-tmp file). This is
1129 # a hack to ensure that all the architecture dependant global
1130 # builtin_type_* variables are initialized before anything else
1131 # (per-architecture code is called in the same order that it is
1132 # registered). The ``correct fix'' is to have all the builtin types
1133 # made part of the architecture and initialize them on-demand (using
1134 # gdbarch_data) just like everything else. The catch is that other
1135 # modules still take the address of these builtin types forcing them
1136 # to be variables, sigh!
1138 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1139 # anchored on the first column and excludes the ``/'' character so
1140 # that it doesn't add the $(srcdir) prefix to any file that already
1141 # has an absolute path. It turns out that $(DEC)'s True64 make
1142 # automatically adds the $(srcdir) prefixes when it encounters files
1143 # in sub-directories such as cli/ and mi/.
1145 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1146 # duplicates. Files in the gdb/ directory can end up appearing in
1147 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1149 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1150 init.c
: $(INIT_FILES
)
1152 @
rm -f init.c-tmp init.l-tmp
1154 @echo gdbtypes
> init.l-tmp
1155 @
-LANG
=C
; export LANG
; \
1156 LC_ALL
=C
; export LC_ALL
; \
1157 echo
$(INIT_FILES
) | \
1160 -e
'/^gdbtypes.[co]$$/d' \
1161 -e
'/^init.[co]$$/d' \
1162 -e
'/xdr_ld.[co]$$/d' \
1163 -e
'/xdr_ptrace.[co]$$/d' \
1164 -e
'/xdr_rdb.[co]$$/d' \
1165 -e
'/udr.[co]$$/d' \
1166 -e
'/udip2soc.[co]$$/d' \
1167 -e
'/udi2go32.[co]$$/d' \
1168 -e
'/version.[co]$$/d' \
1169 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1170 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1171 -e
's/\.[co]$$/.c/' \
1172 -e
's,signals\.c,common/signals\.c,' \
1173 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1175 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1180 * ) echo
$$f ; fs
="$$fs $$f";; \
1183 @echo
'/* Do not modify this file. */' >>init.c-tmp
1184 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1185 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1186 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1187 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1188 @echo
'void' >>init.c-tmp
1189 @echo
'initialize_all_files (void)' >>init.c-tmp
1190 @echo
'{' >>init.c-tmp
1191 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1192 @echo
'}' >>init.c-tmp
1194 @mv init.c-tmp init.c
1198 # Create a library of the gdb object files and build GDB by linking
1201 # init.o is very important. It pulls in the rest of GDB.
1202 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1203 libgdb.a
: $(LIBGDB_OBS
)
1205 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1208 # Removing the old gdb first works better if it is running, at least on SunOS.
1209 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1211 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1212 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1213 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1215 # Convenience rule to handle recursion.
1216 $(LIBGNU
) $(GNULIB_H
): all-lib
1217 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1218 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1221 # Convenience rule to handle recursion.
1222 .PHONY
: all-data-directory
1223 all-data-directory
: data-directory
/Makefile
1224 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1226 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1227 # on itself without copying the executable. So "make gdb1" will make
1228 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1229 # Removing gdb1 before the copy is the right thing if gdb1 is open
1230 # in another process.
1231 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1233 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1235 # Put the proper machine-specific files first, so M-. on a machine
1236 # specific routine gets the one for the correct machine. (FIXME: those
1237 # files go in twice; we should be removing them from the main list).
1239 # TAGS depends on all the files that go into it so you can rebuild TAGS
1240 # with `make TAGS' and not have to say `rm TAGS' first.
1242 GDB_NM_FILE
= @GDB_NM_FILE@
1243 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1245 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1246 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1247 echo $(srcdir)/$$i ; \
1248 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1250 done) | sed -e 's/\.o$$/\.c/'` \
1251 `find $(srcdir)/config -name '*.h' -print`
1255 clean mostlyclean: $(CONFIG_CLEAN
)
1256 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1257 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1258 rm -f init.c version.c observer.h observer.inc
1259 rm -f gdb
$(EXEEXT
) core make.log
1260 rm -f gdb
[0-9]$(EXEEXT
)
1261 rm -f test-cp-name-parser
$(EXEEXT
)
1262 rm -f xml-builtin.c stamp-xml
1265 # This used to depend on c-exp.c m2-exp.c TAGS
1266 # I believe this is wrong; the makefile standards for distclean just
1267 # describe removing files; the only sort of "re-create a distribution"
1268 # functionality described is if the distributed files are unmodified.
1269 # NB: While GDBSERVER might be configured on native systems, it isn't
1270 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1272 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1273 rm -rf
$(GNULIB_BUILDDIR
)
1274 rm -f gdbserver
/config.status gdbserver
/config.log
1275 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1276 rm -f gdbserver
/Makefile gdbserver
/config.cache
1277 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1278 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1279 rm -f config.log config.cache
1283 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1284 realclean: maintainer-clean
1286 local-maintainer-clean
:
1287 @echo
"This command is intended for maintainers to use;"
1288 @echo
"it deletes files that may require special tools to rebuild."
1291 ada-lex.c ada-exp.c \
1293 f-exp.c go-exp.c m2-exp.c p-exp.c
1294 rm -f TAGS
$(INFOFILES
)
1296 rm -f nm.h config.status
1298 do-maintainer-clean
:
1299 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1302 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1303 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1306 @for i in
$(DODIRS
); do \
1308 $(REQUIRED_SUBDIRS
)) \
1309 if
[ ! -f .
/$$i/Makefile
] ; then \
1310 echo
"Missing $$i/Makefile" >&2 ; \
1314 if
[ -f .
/$$i/Makefile
] ; then \
1316 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1317 else exit
1 ; fi
; \
1321 Makefile
: Makefile.in config.status @frags@
1322 # Regenerate the Makefile and the tm.h / nm.h links.
1323 CONFIG_FILES
="Makefile" \
1326 $(SHELL
) config.status
1328 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1329 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1330 CONFIG_COMMANDS
="depfiles" \
1333 $(SHELL
) config.status
1335 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1336 CONFIG_FILES
="data-directory/Makefile" \
1337 CONFIG_COMMANDS
="depfiles" \
1340 $(SHELL
) config.status
1342 jit-reader.h
: $(srcdir)/jit-reader.in
1343 $(SHELL
) config.status
$@
1345 gcore
: $(srcdir)/gcore.in
1346 $(SHELL
) config.status
$@
1348 config.h
: stamp-h
; @true
1349 stamp-h
: $(srcdir)/config.in config.status
1350 CONFIG_HEADERS
=config.h
:config.in \
1351 CONFIG_COMMANDS
="default depdir" \
1354 $(SHELL
) config.status
1356 config.status
: $(srcdir)/configure configure.tgt configure.host development.sh
1357 $(SHELL
) config.status
--recheck
1360 ACLOCAL_AMFLAGS
= -I ..
/config
1362 # Keep these in sync with the includes in acinclude.m4.
1365 acx_configure_dir.m4 \
1368 ..
/config
/acinclude.m4 \
1369 ..
/config
/plugins.m4 \
1370 ..
/config
/lead-dot.m4 \
1371 ..
/config
/override.m4 \
1372 ..
/config
/largefile.m4 \
1373 ..
/config
/gettext-sister.m4 \
1374 ..
/config
/lib-ld.m4 \
1375 ..
/config
/lib-prefix.m4 \
1376 ..
/config
/lib-link.m4 \
1379 ..
/config
/depstand.m4 \
1380 ..
/config
/lcmessage.m4 \
1381 ..
/config
/codeset.m4 \
1384 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1385 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1388 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1389 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1390 cd
$(srcdir) && $(AUTOCONF
)
1392 AUTOHEADER
= autoheader
1393 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1394 cd
$(srcdir) && $(AUTOHEADER
)
1398 # automatic rebuilding in automake-generated Makefiles requires
1399 # this rule in the toplevel Makefile, which, with GNU make, causes
1400 # the desired updates through the implicit regeneration of the Makefile
1401 # and all of its prerequisites.
1408 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1410 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1412 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1414 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1416 # GDB MANUAL: TeX dvi file
1418 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1420 # GDB MANUAL: info file
1422 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1424 # Make copying.c from COPYING
1425 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1426 awk
-f
$(srcdir)/copying.awk \
1427 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1428 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1430 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
1431 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
1432 $(host_alias
) $(target_alias
) version.c
1434 observer.h
: observer.sh doc
/observer.texi
1435 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1437 observer.inc
: observer.sh doc
/observer.texi
1438 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1441 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1442 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1444 gdb.cxref
: $(SFILES
)
1445 cxref
-I.
$(SFILES
) >gdb.cxref
1449 # GNU Make has an annoying habit of putting *all* the Makefile variables
1450 # into the environment, unless you include this target as a circumvention.
1451 # Rumor is that this will be fixed (and this target can be removed)
1455 # GNU Make 3.63 has a different problem: it keeps tacking command line
1456 # overrides onto the definition of $(MAKE). This variable setting
1461 aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
1462 aarch64-linux-nat.c \
1464 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1465 alpha-tdep.c alpha-mdebug-tdep.c \
1466 alpha-linux-tdep.c alpha-osf1-tdep.c \
1467 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1468 amd64-nat.c amd64-tdep.c \
1469 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1470 amd64nbsd-nat.c amd64nbsd-tdep.c \
1471 amd64obsd-nat.c amd64obsd-tdep.c \
1472 amd64-darwin-tdep.c \
1473 amd64-dicos-tdep.c \
1474 amd64-linux-nat.c amd64-linux-tdep.c \
1476 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1477 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1479 bfin-linux-tdep.c bfin-tdep.c \
1480 bsd-uthread.c bsd-kvm.c \
1482 dcache.c dicos-tdep.c darwin-nat.c \
1487 go32-nat.c h8300-tdep.c \
1488 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1489 hppa-linux-tdep.c hppa-linux-nat.c \
1490 hppabsd-nat.c hppabsd-tdep.c \
1492 hppanbsd-nat.c hppanbsd-tdep.c \
1493 i386-tdep.c i386-linux-nat.c \
1494 i386v4-nat.c i386-cygwin-tdep.c \
1495 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1496 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1498 i386-darwin-tdep.c i386-darwin-nat.c \
1500 i386-linux-tdep.c i386-nat.c \
1501 i386-sol2-nat.c i386-sol2-tdep.c \
1502 i386gnu-nat.c i386gnu-tdep.c \
1503 ia64-hpux-nat.c ia64-hpux-tdep.c \
1504 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1505 inf-ptrace.c inf-ttrace.c \
1507 ia64-libunwind-tdep.c \
1514 m32r-linux-nat.c m32r-linux-tdep.c \
1516 m68kbsd-nat.c m68kbsd-tdep.c \
1517 m68klinux-nat.c m68klinux-tdep.c \
1518 m88k-tdep.c m88kbsd-nat.c \
1519 microblaze-tdep.c microblaze-linux-tdep.c \
1521 mips-linux-nat.c mips-linux-tdep.c \
1524 mipsnbsd-nat.c mipsnbsd-tdep.c \
1525 mips64obsd-nat.c mips64obsd-tdep.c \
1527 nios2-tdep.c nios2-linux-tdep.c \
1528 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1530 somread.c solib-som.c \
1532 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
1533 ppcfbsd-nat.c ppcfbsd-tdep.c \
1534 ppcnbsd-nat.c ppcnbsd-tdep.c \
1535 ppcobsd-nat.c ppcobsd-tdep.c \
1537 ravenscar-thread.c \
1538 remote-m32r-sdi.c remote-mips.c \
1542 rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
1543 rs6000-lynx178-tdep.c \
1545 s390-tdep.c s390-nat.c \
1547 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1548 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1550 solib-irix.c solib-svr4.c \
1551 sparc-linux-nat.c sparc-linux-tdep.c \
1552 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1553 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1554 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1555 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1556 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1557 sparc-ravenscar-thread.c \
1558 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1559 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1561 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1562 windows-nat.c windows-tdep.c \
1565 xtensa-tdep.c xtensa-config.c \
1566 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1568 # Some files need explicit build rules (due to -Werror problems) or due
1569 # to sub-directory fun 'n' games.
1571 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1572 # errors. It turns out that that is the least of monitor.c's
1573 # problems. The function print_vsprintf appears to be using
1574 # va_arg(long) to extract CORE_ADDR parameters - something that
1575 # definitly will not work. "monitor.c" needs to be rewritten so that
1576 # it doesn't use format strings and instead uses callbacks.
1577 monitor.o
: $(srcdir)/monitor.c
1578 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1579 $(COMPILE.post
) $(srcdir)/monitor.c
1582 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1583 # checks format strings.
1584 printcmd.o
: $(srcdir)/printcmd.c
1585 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1586 $(COMPILE.post
) $(srcdir)/printcmd.c
1589 # ada-exp.c can appear in srcdir, for releases; or in ., for
1590 # development builds.
1591 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
1593 # Some versions of flex give output that triggers
1594 # -Wold-style-definition.
1595 ada-exp.o
: ada-exp.c
1596 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
1597 $(COMPILE.post
) $(ADA_EXP_C
)
1600 # Message files. Based on code in gcc/Makefile.in.
1602 # Rules for generating translated message descriptions. Disabled by
1603 # autoconf if the tools are not available.
1605 .SUFFIXES
: .po .gmo .pox .pot
1606 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1610 # This notation should be acceptable to all Make implementations used
1611 # by people who are interested in updating .po files.
1612 update-po
: $(CATALOGS
:.gmo
=.pox
)
1614 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1617 -test -d po || mkdir po
1618 $(GMSGFMT
) --statistics
-o
$@
$<
1620 # The new .po has to be gone over by hand, so we deposit it into
1621 # build/po with a different extension. If build/po/$(PACKAGE).pot
1622 # exists, use it (it was just created), else use the one in srcdir.
1624 -test -d po || mkdir po
1625 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1626 then echo po/$(PACKAGE).pot; \
1627 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1629 # This rule has to look for .gmo modules in both srcdir and the cwd,
1630 # and has to check that we actually have a catalog for each language,
1631 # in case they weren't built or included with the distribution.
1633 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1634 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1635 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1636 if
[ -f
$$cat ]; then
:; \
1637 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1640 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1641 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1642 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1643 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1644 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1647 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1648 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1649 if
[ -f
$$cat ]; then
:; \
1650 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1653 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1654 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1656 # Delete po/*.gmo only if we are not building in the source directory.
1658 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1660 # Rule for regenerating the message template (gdb.pot). Instead of
1661 # forcing everyone to edit POTFILES.in, which proved impractical, this
1662 # rule has no dependencies and always regenerates gdb.pot. This is
1663 # relatively harmless since the .po files do not directly depend on
1664 # it. The .pot file is left in the build directory. Since GDB's
1665 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1666 # files) force this rule.
1667 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1668 po
/$(PACKAGE
).pot
: force
1669 -test -d po || mkdir po
1670 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1674 # YACC/LEX dependencies
1676 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1677 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1678 # said LANG-exp.c rather than ./c-exp.c some makes would
1679 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1680 # decls for malloc/realloc/free which conflict with everything else.
1681 # Strictly speaking c-exp.c should therefore depend on
1682 # Makefile.in, but that was a pretty big annoyance.
1687 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1688 ||
(rm -f
$@
; false
)
1689 sed
-e
'/extern.*malloc/d' \
1690 -e
'/extern.*realloc/d' \
1691 -e
'/extern.*free/d' \
1692 -e
'/include.*malloc.h/d' \
1693 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1694 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1695 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1696 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1697 -e
'/^#line.*y.tab.c/d' \
1698 -e
"s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
1702 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1703 $(FLEX
) -o
$@
$< && \
1705 sed
-e
'/extern.*malloc/d' \
1706 -e
'/extern.*realloc/d' \
1707 -e
'/extern.*free/d' \
1708 -e
'/include.*malloc.h/d' \
1709 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1710 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1711 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1712 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1713 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1717 elif
[ -f
$@
]; then \
1718 echo
"Warning: $*.c older than $*.l and flex not available."; \
1720 echo
"$@ missing and flex not available."; \
1724 .PRECIOUS
: ada-lex.c
1728 xml-builtin.c
: stamp-xml
; @true
1729 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1730 rm -f xml-builtin.tmp
1732 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1733 xml-builtin.tmp
$(XMLFILES
)
1734 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1735 echo stamp
> stamp-xml
1737 .PRECIOUS
: xml-builtin.c
1740 # gdb/cli/ dependencies
1742 # Need to explicitly specify the compile rule as make will do nothing
1743 # or try to compile the object file into the sub-directory.
1745 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1746 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1749 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1750 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1753 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1754 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1757 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1758 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1761 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1762 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1765 cli-script.o
: $(srcdir)/cli
/cli-script.c
1766 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1769 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1770 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1773 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1774 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1779 # GDBTK sub-directory
1781 # Need to explicitly specify the compile rule as make will do nothing
1782 # or try to compile the object file into the mi directory.
1784 all-gdbtk
: insight
$(EXEEXT
)
1787 transformed_name
=`t='$(program_transform_name)'; \
1788 echo insight | sed -e $$t` ; \
1789 if
test "x$$transformed_name" = x
; then \
1790 transformed_name
=insight
; \
1794 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1795 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1796 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1797 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1798 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1799 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1800 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1801 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1802 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1803 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1804 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1805 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1806 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1807 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1808 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1809 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1810 cd
$(srcdir)/gdbtk
/library
; \
1811 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1813 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1817 transformed_name
=`t='$(program_transform_name)'; \
1818 echo insight | sed -e $$t` ; \
1819 if
test "x$$transformed_name" = x
; then \
1820 transformed_name
=insight
; \
1824 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1825 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1828 rm -f insight
$(EXEEXT
)
1830 # Removing the old gdb first works better if it is running, at least on SunOS.
1831 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1832 $(CDEPS
) $(TDEPLIBS
)
1833 rm -f insight
$(EXEEXT
)
1834 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1835 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1836 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1838 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1839 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1841 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1842 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1844 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1845 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1847 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1848 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1851 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1852 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1855 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1856 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1859 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1860 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1863 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1864 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1867 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1868 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1871 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1872 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1875 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1876 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1879 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1880 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1883 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1884 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1889 # gdb/mi/ dependencies
1891 # Need to explicitly specify the compile rule as make will do nothing
1892 # or try to compile the object file into the sub-directory.
1894 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1895 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1898 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
1899 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
1902 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1903 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1906 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1907 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1910 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1911 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1914 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
1915 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
1918 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1919 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1922 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1923 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1926 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1927 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1930 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1931 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1934 mi-console.o
: $(srcdir)/mi
/mi-console.c
1935 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1938 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1939 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1942 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1943 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1946 mi-main.o
: $(srcdir)/mi
/mi-main.c
1947 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1950 mi-out.o
: $(srcdir)/mi
/mi-out.c
1951 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1954 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1955 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1958 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1959 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1962 mi-common.o
: $(srcdir)/mi
/mi-common.c
1963 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1966 # gdb/common/ dependencies
1968 # Need to explicitly specify the compile rule as make will do nothing
1969 # or try to compile the object file into the sub-directory.
1971 signals.o
: $(srcdir)/common
/signals.c
1972 $(COMPILE
) $(srcdir)/common
/signals.c
1975 common-utils.o
: ${srcdir}/common
/common-utils.c
1976 $(COMPILE
) $(srcdir)/common
/common-utils.c
1979 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
1980 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
1983 xml-utils.o
: ${srcdir}/common
/xml-utils.c
1984 $(COMPILE
) $(srcdir)/common
/xml-utils.c
1987 ptid.o
: ${srcdir}/common
/ptid.c
1988 $(COMPILE
) $(srcdir)/common
/ptid.c
1991 buffer.o
: ${srcdir}/common
/buffer.c
1992 $(COMPILE
) $(srcdir)/common
/buffer.c
1995 filestuff.o
: $(srcdir)/common
/filestuff.c
1996 $(COMPILE
) $(srcdir)/common
/filestuff.c
1999 format.o
: ${srcdir}/common
/format.c
2000 $(COMPILE
) $(srcdir)/common
/format.c
2003 linux-osdata.o
: ${srcdir}/common
/linux-osdata.c
2004 $(COMPILE
) $(srcdir)/common
/linux-osdata.c
2007 linux-procfs.o
: $(srcdir)/common
/linux-procfs.c
2008 $(COMPILE
) $(srcdir)/common
/linux-procfs.c
2011 linux-ptrace.o
: $(srcdir)/common
/linux-ptrace.c
2012 $(COMPILE
) $(srcdir)/common
/linux-ptrace.c
2015 common-agent.o
: $(srcdir)/common
/agent.c
2016 $(COMPILE
) $(srcdir)/common
/agent.c
2019 vec.o
: ${srcdir}/common
/vec.c
2020 $(COMPILE
) $(srcdir)/common
/vec.c
2023 linux-btrace.o
: ${srcdir}/common
/linux-btrace.c
2024 $(COMPILE
) $(srcdir)/common
/linux-btrace.c
2027 mips-linux-watch.o
: ${srcdir}/common
/mips-linux-watch.c
2028 $(COMPILE
) $(srcdir)/common
/mips-linux-watch.c
2032 # gdb/target/ dependencies
2034 # Need to explicitly specify the compile rule as make will do nothing
2035 # or try to compile the object file into the sub-directory.
2037 waitstatus.o
: ${srcdir}/target
/waitstatus.c
2038 $(COMPILE
) $(srcdir)/target
/waitstatus.c
2041 # gdb/nat/ dependencies
2043 # Need to explicitly specify the compile rule as make will do nothing
2044 # or try to compile the object file into the sub-directory.
2046 linux-waitpid.o
: ${srcdir}/nat
/linux-waitpid.c
2047 $(COMPILE
) $(srcdir)/nat
/linux-waitpid.c
2051 # gdb/tui/ dependencies
2053 # Need to explicitly specify the compile rule as make will do nothing
2054 # or try to compile the object file into the sub-directory.
2056 tui.o
: $(srcdir)/tui
/tui.c
2057 $(COMPILE
) $(srcdir)/tui
/tui.c
2060 tui-command.o
: $(srcdir)/tui
/tui-command.c
2061 $(COMPILE
) $(srcdir)/tui
/tui-command.c
2064 tui-data.o
: $(srcdir)/tui
/tui-data.c
2065 $(COMPILE
) $(srcdir)/tui
/tui-data.c
2068 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
2069 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
2072 tui-file.o
: $(srcdir)/tui
/tui-file.c
2073 $(COMPILE
) $(srcdir)/tui
/tui-file.c
2076 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
2077 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
2080 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
2081 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
2084 tui-io.o
: $(srcdir)/tui
/tui-io.c
2085 $(COMPILE
) $(srcdir)/tui
/tui-io.c
2088 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
2089 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
2092 tui-out.o
: $(srcdir)/tui
/tui-out.c
2093 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2096 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2097 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2100 tui-source.o
: $(srcdir)/tui
/tui-source.c
2101 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2104 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2105 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2108 tui-win.o
: $(srcdir)/tui
/tui-win.c
2109 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2112 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2113 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2116 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2117 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2120 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2121 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2125 # gdb/python/ dependencies
2127 # Need to explicitly specify the compile rule as make will do nothing
2128 # or try to compile the object file into the sub-directory.
2130 # Flags needed to compile Python code
2131 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2133 python.o
: $(srcdir)/python
/python.c
2134 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2137 py-arch.o
: $(srcdir)/python
/py-arch.c
2138 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-arch.c
2141 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2142 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2145 py-block.o
: $(srcdir)/python
/py-block.c
2146 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2149 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2150 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2153 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2154 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2157 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2158 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2161 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2162 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2165 py-event.o
: $(srcdir)/python
/py-event.c
2166 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2169 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2170 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2173 py-evts.o
: $(srcdir)/python
/py-evts.c
2174 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2177 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2178 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2181 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2182 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2185 py-frame.o
: $(srcdir)/python
/py-frame.c
2186 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2189 py-framefilter.o
: $(srcdir)/python
/py-framefilter.c
2190 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-framefilter.c
2193 py-function.o
: $(srcdir)/python
/py-function.c
2194 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2197 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2198 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2201 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2202 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2205 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2206 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2209 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2210 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2213 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2214 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2217 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2218 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2221 py-param.o
: $(srcdir)/python
/py-param.c
2222 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2225 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2226 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2229 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2230 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2233 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2234 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2237 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2238 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2241 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2242 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2245 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2246 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2249 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2250 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2253 py-type.o
: $(srcdir)/python
/py-type.c
2254 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2257 py-utils.o
: $(srcdir)/python
/py-utils.c
2258 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2261 py-value.o
: $(srcdir)/python
/py-value.c
2262 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2266 # Dependency tracking. Most of this is conditional on GNU Make being
2267 # found by configure; if GNU Make is not found, we fall back to a
2271 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2272 # Note that we put the dependencies into a .Tpo file, then move them
2273 # into place if the compile succeeds. We need this because gcc does
2274 # not atomically write the dependency output file.
2275 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2276 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2277 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2278 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2280 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2281 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2282 # depcomp handles atomicity for us, so we don't need a postcompile
2284 @GMAKE_TRUE@
override POSTCOMPILE
=
2287 # A list of all the objects we might care about in this build, for
2288 # dependency tracking.
2289 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2290 test-cp-name-parser.o
2292 # Ensure that generated files are created early. Use order-only
2293 # dependencies if available. They require GNU make 3.80 or newer,
2294 # and the .VARIABLES variable was introduced at the same time.
2295 @GMAKE_TRUE@
ifdef .VARIABLES
2296 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2298 $(all_object_files
) : $(generated_files
)
2302 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2304 ### end of the gdb Makefile.in.