1 # Copyright (C) 1989-2017 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Please keep lists in this file sorted alphabetically, with one item per line.
19 # Here are the general guidelines for ordering files and directories:
21 # - Files come before directories.
22 # - The extensions are not taken into account when comparing filenames, except
23 # if the filenames are otherwise equal.
24 # - A filename that is a prefix of another one comes before.
25 # - Underscores and dashes are treated equally, and come before alphanumeric
38 exec_prefix = @
exec_prefix@
40 host_alias
= @host_alias@
41 target_alias
= @target_alias@
42 program_transform_name
= @program_transform_name@
45 tooldir
= $(libdir)/$(target_alias
)
48 localedir
= @localedir@
50 man1dir = $(mandir)/man1
51 man2dir = $(mandir)/man2
52 man3dir = $(mandir)/man3
53 man4dir = $(mandir)/man4
54 man5dir = $(mandir)/man5
55 man6dir = $(mandir)/man6
56 man7dir = $(mandir)/man7
57 man8dir = $(mandir)/man8
58 man9dir = $(mandir)/man9
60 datarootdir
= @datarootdir@
64 includedir = @
includedir@
66 install_sh
= @install_sh@
68 # This can be referenced by `LIBINTL' as computed by
69 # ZW_GNU_GETTEXT_SISTER_DIR.
79 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
80 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
81 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
82 INSTALL_DATA
= @INSTALL_DATA@
101 # If you are compiling with GCC, make sure that either 1) You have the
102 # fixed include files where GCC can reach them, or 2) You use the
103 # -traditional flag. Otherwise the ioctl calls in inflow.c
104 # will be incorrectly compiled. The "fixincludes" script in the gcc
105 # distribution will fix your include files up.
108 CXX_DIALECT
= @CXX_DIALECT@
110 # Dependency tracking information.
111 DEPMODE
= @CCDEPMODE@
113 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
115 # Note that these are overridden by GNU make-specific code below if
116 # GNU make is used. The overrides implement dependency tracking.
117 COMPILE.pre
= $(CXX
) -x c
++ $(CXX_DIALECT
)
118 COMPILE.post
= -c
-o
$@
119 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
122 # Directory containing source files.
125 top_srcdir
= @top_srcdir@
129 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
130 # not defined, but ada-lex.c is present, compilation will continue,
131 # possibly with a warning.
134 YLWRAP
= $(srcdir)/..
/ylwrap
136 # where to find makeinfo, preferably one designed for texinfo-2
137 MAKEINFO
= @MAKEINFO@
138 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
139 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
140 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
142 MAKEHTML
= $(MAKEINFO_CMD
) --html
145 # Set this up with gcc if you have gnu ld and the loader will print out
146 # line numbers for undefined references.
148 CC_LD
= $(CXX
) $(CXX_DIALECT
)
150 # Where is our "include" directory? Typically $(srcdir)/../include.
151 # This is essentially the header file directory for the library
152 # routines in libiberty.
153 INCLUDE_DIR
= $(srcdir)/..
/include
154 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
156 # Where is the "-liberty" library? Typically in ../libiberty.
157 LIBIBERTY
= ..
/libiberty
/libiberty.a
159 # Where is the BFD library? Typically in ../bfd.
161 BFD
= $(BFD_DIR
)/libbfd.a
162 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
163 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
165 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
166 # -I../zlib, unless we were configured with --with-system-zlib, in which
167 # case both are empty.
171 # Where is the decnumber library? Typically in ../libdecnumber.
172 LIBDECNUMBER_DIR
= ..
/libdecnumber
173 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
174 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
175 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
177 # Where is the READLINE library? Typically in ../readline.
178 READLINE_DIR
= ..
/readline
179 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
180 READLINE
= @READLINE@
181 READLINE_DEPS
= @READLINE_DEPS@
182 READLINE_CFLAGS
= @READLINE_CFLAGS@
184 # Where is expat? This will be empty if expat was not available.
185 LIBEXPAT
= @LIBEXPAT@
187 # Where is lzma? This will be empty if lzma was not available.
190 # Where is libbabeltrace? This will be empty if lbabeltrace was not
192 LIBBABELTRACE
= @LIBBABELTRACE@
194 # Where is libipt? This will be empty if libipt was not available.
197 # Where is libmpfr? This will be empty if libmpfr was not available.
200 WARN_CFLAGS
= @WARN_CFLAGS@
201 WERROR_CFLAGS
= @WERROR_CFLAGS@
202 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
203 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
205 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
206 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
207 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
208 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
210 RDYNAMIC
= @RDYNAMIC@
212 # Where is the INTL library? Typically in ../intl.
214 INTL_DEPS
= @LIBINTL_DEP@
215 INTL_CFLAGS
= @INCINTL@
217 # Where is the ICONV library? This will be empty if in libc or not available.
218 LIBICONV
= @LIBICONV@
220 # Did the user give us a --with-gdb-datadir option?
221 GDB_DATADIR
= @GDB_DATADIR@
223 # Flags to pass to gdb when invoked with "make run".
226 # Helper code from gnulib.
227 GNULIB_BUILDDIR
= build-gnulib
228 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
229 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
231 # Generated headers in the gnulib directory. These must be listed
232 # so that they are generated before other files are compiled.
233 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
236 # CLI sub directory definitons
248 SUBDIR_CLI_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_CLI_SRCS
))
255 # MI sub directory definitons
276 SUBDIR_MI_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_MI_SRCS
))
283 # TUI sub directory definitions
301 tui
/tui-wingeneral.c \
304 SUBDIR_TUI_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_TUI_SRCS
))
308 SUBDIR_TUI_CFLAGS
= -DTUI
=1
311 # GCC Compile support sub-directory definitions
313 SUBDIR_GCC_COMPILE_SRCS
= \
315 compile
/compile-c-support.c \
316 compile
/compile-c-symbols.c \
317 compile
/compile-c-types.c \
318 compile
/compile-loc2c.c \
319 compile
/compile-object-load.c \
320 compile
/compile-object-load.h \
321 compile
/compile-object-run.c \
322 compile
/compile-object-run.h
324 SUBDIR_GCC_COMPILE_OBS
= $(patsubst %.c
,%.o
,$(filter %.c
,$(SUBDIR_GCC_COMPILE_SRCS
)))
327 # Guile sub directory definitons for guile support.
329 SUBDIR_GUILE_SRCS
= \
332 guile
/scm-auto-load.c \
334 guile
/scm-breakpoint.c \
337 guile
/scm-exception.c \
340 guile
/scm-iterator.c \
341 guile
/scm-lazy-string.c \
343 guile
/scm-objfile.c \
346 guile
/scm-pretty-print.c \
347 guile
/scm-progspace.c \
348 guile
/scm-safe-call.c \
356 SUBDIR_GUILE_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_GUILE_SRCS
))
359 SUBDIR_GUILE_LDFLAGS
=
360 SUBDIR_GUILE_CFLAGS
=
363 # python sub directory definitons
365 SUBDIR_PYTHON_SRCS
= \
367 python
/py-auto-load.c \
369 python
/py-bpevent.c \
370 python
/py-breakpoint.c \
372 python
/py-continueevent.c \
374 python
/py-evtregistry.c \
376 python
/py-exitedevent.c \
377 python
/py-finishbreakpoint.c \
379 python
/py-framefilter.c \
380 python
/py-function.c \
381 python
/py-gdb-readline.c \
382 python
/py-inferior.c \
383 python
/py-infevents.c \
384 python
/py-infthread.c \
385 python
/py-instruction.c \
386 python
/py-lazy-string.c \
387 python
/py-linetable.c \
388 python
/py-newobjfileevent.c \
389 python
/py-objfile.c \
391 python
/py-prettyprint.c \
392 python
/py-progspace.c \
394 python
/py-record-btrace.c \
395 python
/py-record-full.c \
396 python
/py-signalevent.c \
397 python
/py-stopevent.c \
400 python
/py-threadevent.c \
406 python
/py-xmethods.c \
409 SUBDIR_PYTHON_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_PYTHON_SRCS
))
412 SUBDIR_PYTHON_LDFLAGS
=
413 SUBDIR_PYTHON_CFLAGS
=
415 SUBDIR_UNITTESTS_SRCS
= \
416 unittests
/array-view-selftests.c \
417 unittests
/common-utils-selftests.c \
418 unittests
/environ-selftests.c \
419 unittests
/function-view-selftests.c \
420 unittests
/lookup_name_info-selftests.c \
421 unittests
/memory-map-selftests.c \
422 unittests
/memrange-selftests.c \
423 unittests
/offset-type-selftests.c \
424 unittests
/optional-selftests.c \
425 unittests
/ptid-selftests.c \
426 unittests
/rsp-low-selftests.c \
427 unittests
/scoped_restore-selftests.c \
428 unittests
/xml-utils-selftests.c
430 SUBDIR_UNITTESTS_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_UNITTESTS_SRCS
))
432 SUBDIR_TARGET_SRCS
= target
/waitstatus.c
433 SUBDIR_TARGET_OBS
= $(patsubst %.c
,%.o
,$(SUBDIR_TARGET_SRCS
))
436 # Opcodes currently live in one of two places. Either they are in the
437 # opcode library, typically ../opcodes, or they are in a header file
439 # Where is the "-lopcodes" library, with (some of) the opcode tables and
441 OPCODES_DIR
= ..
/opcodes
442 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
443 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
444 # Where are the other opcode tables which only have header file
446 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
447 # Some source files like to use #include "opcodes/file.h"
448 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
450 # The simulator is usually nonexistent; targets that include one
451 # should set this to list all the .o or .a files to be linked in.
454 WIN32LIBS
= @WIN32LIBS@
456 # Tcl et al cflags and libraries
458 TCL_CFLAGS
= @TCL_INCLUDE@
459 GDBTKLIBS
= @GDBTKLIBS@
460 # Extra flags that the GDBTK files need:
461 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
464 TK_CFLAGS
= @TK_INCLUDE@
466 X11_CFLAGS
= @TK_XINCLUDES@
470 WIN32LDAPP
= @WIN32LDAPP@
473 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
474 IDE_CFLAGS
= $(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
476 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
478 # The version of gdbtk we're building. This should be kept
479 # in sync with GDBTK_VERSION and friends in gdbtk.h.
481 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
483 # Gdbtk requires an absolute path to the source directory or
484 # the testsuite won't run properly.
485 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
498 SUBDIR_GDBTK_SRCS
= \
499 gdbtk
/generic
/gdbtk.c \
500 gdbtk
/generic
/gdbtk-bp.c \
501 gdbtk
/generic
/gdbtk-cmds.c \
502 gdbtk
/generic
/gdbtk-hooks.c \
503 gdbtk
/generic
/gdbtk-interp.c \
504 gdbtk
/generic
/gdbtk-main.c \
505 gdbtk
/generic
/gdbtk-register.c \
506 gdbtk
/generic
/gdbtk-stack.c \
507 gdbtk
/generic
/gdbtk-varobj.c \
508 gdbtk
/generic
/gdbtk-wrapper.c
510 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
511 SUBDIR_GDBTK_LDFLAGS
=
512 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
514 CONFIG_OBS
= @CONFIG_OBS@
515 CONFIG_SRCS
= @CONFIG_SRCS@
516 CONFIG_DEPS
= @CONFIG_DEPS@
517 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
518 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
519 CONFIG_ALL
= @CONFIG_ALL@
520 CONFIG_CLEAN
= @CONFIG_CLEAN@
521 CONFIG_INSTALL
= @CONFIG_INSTALL@
522 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
523 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
525 CONFIG_SRC_SUBDIR
= arch cli mi compile tui unittests guile python target
526 CONFIG_DEP_SUBDIR
= $(addsuffix /$(DEPDIR
),$(CONFIG_SRC_SUBDIR
))
528 # -I. for config files.
529 # -I$(srcdir) for gdb internal headers.
530 # -I$(srcdir)/config for more generic config files.
532 # It is also possible that you will need to add -I/usr/include/sys if
533 # your system doesn't have fcntl.h in /usr/include (which is where it
534 # should be according to Posix).
536 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
537 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
539 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
540 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
542 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
544 # These are specifically reserved for setting from the command line
545 # when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
547 CXXFLAGS
= @CXXFLAGS@
549 # Set by configure, for e.g. expat. Python installations are such that
550 # C headers are included using their basename (for example, we #include
551 # <Python.h> rather than, say, <python/Python.h>). Since the file names
552 # are sometimes a little generic, we think that the risk of collision
553 # with other header files is high. If that happens, we try to mitigate
554 # a bit the consequences by putting the Python includes last in the list.
555 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
557 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
558 INTERNAL_CFLAGS_BASE
= \
559 $(CXXFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
560 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) $(ZLIBINC
) \
561 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
562 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
563 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
564 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
566 # LDFLAGS is specifically reserved for setting from the command line
570 # Profiling options need to go here to work.
571 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
572 # and have it work; that's why CFLAGS is here.
573 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
575 $(CXXFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) \
576 $(LDFLAGS
) $(CONFIG_LDFLAGS
)
578 # If your system is missing alloca(), or, more likely, it's there but
579 # it doesn't work, then refer to libiberty.
581 # Libraries and corresponding dependencies for compiling gdb.
582 # XM_CLIBS, defined in *config files, have host-dependent libs.
583 # LIBIBERTY appears twice on purpose.
584 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(ZLIB
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
585 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
586 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
587 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) $(LIBIPT
) \
588 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
) $(LIBICONV
) $(LIBMPFR
)
589 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
590 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
592 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
593 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
597 LINT
= /usr
/5bin
/lint
598 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
599 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
605 # XML files to build in to GDB.
607 $(srcdir)/features
/btrace.dtd \
608 $(srcdir)/features
/btrace-conf.dtd \
609 $(srcdir)/features
/gdb-target.dtd \
610 $(srcdir)/features
/library-list.dtd \
611 $(srcdir)/features
/library-list-aix.dtd \
612 $(srcdir)/features
/library-list-svr4.dtd \
613 $(srcdir)/features
/osdata.dtd \
614 $(srcdir)/features
/threads.dtd \
615 $(srcdir)/features
/traceframe-info.dtd \
616 $(srcdir)/features
/xinclude.dtd
618 # Build the ser-*.o files the host supports. This includes ser-unix.o
619 # for any system that supports a POSIX interface to the serial port.
621 SER_HARDWIRE
= @SER_HARDWIRE@
623 # This is remote-sim.o if a simulator is to be linked in.
626 # Target-dependent object files.
627 TARGET_OBS
= @TARGET_OBS@
629 # All target-dependent objects files that require 64-bit CORE_ADDR
630 # (used with --enable-targets=all --enable-64-bit-bfd).
631 ALL_64_TARGET_OBS
= \
632 aarch64-fbsd-tdep.o \
633 aarch64-linux-tdep.o \
634 aarch64-newlib-tdep.o \
638 alpha-mdebug-tdep.o \
642 amd64-darwin-tdep.o \
650 amd64-windows-tdep.o \
652 arch
/aarch64-insn.o \
658 sparc64-fbsd-tdep.o \
659 sparc64-linux-tdep.o \
660 sparc64-nbsd-tdep.o \
661 sparc64-obsd-tdep.o \
662 sparc64-sol2-tdep.o \
665 # All other target-dependent objects files (used with --enable-targets=all).
669 arch
/arm-get-next-pcs.o \
725 microblaze-linux-tdep.o \
732 mn10300-linux-tdep.o \
747 ppc-ravenscar-thread.o \
753 rs6000-lynx178-tdep.o \
772 sparc-ravenscar-thread.o \
780 tilegx-linux-tdep.o \
789 xtensa-linux-tdep.o \
792 # The following native-target dependent variables are defined on
794 NAT_FILE
= @NAT_FILE@
795 NATDEPFILES
= @NATDEPFILES@
796 NAT_CDEPS
= @NAT_CDEPS@
797 LOADLIBES
= @LOADLIBES@
798 MH_CFLAGS
= @MH_CFLAGS@
799 XM_CLIBS
= @XM_CLIBS@
800 NAT_GENERATED_FILES
= @NAT_GENERATED_FILES@
801 HAVE_NATIVE_GCORE_HOST
= @HAVE_NATIVE_GCORE_HOST@
803 # Native-target dependent makefile fragment comes in here.
806 # End of native-target dependent variables.
810 "exec_prefix=$(exec_prefix)" \
811 "infodir=$(infodir)" \
812 "datarootdir=$(datarootdir)" \
814 "htmldir=$(htmldir)" \
818 "datadir=$(datadir)" \
819 "includedir=$(includedir)" \
820 "against=$(against)" \
821 "DESTDIR=$(DESTDIR)" \
823 "AR_FLAGS=$(AR_FLAGS)" \
827 "CXX_DIALECT=$(CXX_DIALECT)" \
828 "CXXFLAGS=$(CXXFLAGS)" \
829 "DLLTOOL=$(DLLTOOL)" \
830 "LDFLAGS=$(LDFLAGS)" \
832 "MAKEINFO=$(MAKEINFO)" \
833 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
834 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
835 "MAKEHTML=$(MAKEHTML)" \
836 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
837 "INSTALL=$(INSTALL)" \
838 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
839 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
840 "INSTALL_DATA=$(INSTALL_DATA)" \
841 "RUNTEST=$(RUNTEST)" \
842 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
844 # Flags that we pass when building the testsuite.
846 # empty for native, $(target_alias)/ for cross
847 target_subdir
= @target_subdir@
850 if [ -f $${rootme}/../gcc/xgcc ] ; then \
851 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
852 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
854 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
857 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
860 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
865 if [ -f $${rootme}/../gcc/xg++ ] ; then \
866 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
867 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
869 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
872 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
875 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
879 # The use of $$(x_FOR_TARGET) reduces the command line length by not
880 # duplicating the lengthy definition.
881 TARGET_FLAGS_TO_PASS
= \
883 "exec_prefix=$(exec_prefix)" \
884 "against=$(against)" \
885 'CC=$$(CC_FOR_TARGET)' \
886 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
888 'CXX=$$(CXX_FOR_TARGET)' \
889 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
890 "CXXFLAGS=$(CXXFLAGS)" \
891 "INSTALL=$(INSTALL)" \
892 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
893 "INSTALL_DATA=$(INSTALL_DATA)" \
894 "MAKEINFO=$(MAKEINFO)" \
895 "MAKEHTML=$(MAKEHTML)" \
896 "RUNTEST=$(RUNTEST)" \
897 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
898 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
901 # All source files that go into linking GDB.
903 # Files that should wind up in SFILES and whose corresponding .o
904 # should be in COMMON_OBS.
924 break-catch-syscall.c \
925 break-catch-throw.c \
961 dwarf2-frame-tailcall.c \
974 filename-seen-cache.c \
988 gdbarch-selftests.c \
1039 progspace-and-thread.c \
1070 target-descriptions.c \
1096 # Links made at configuration time should not be specified here, since
1097 # SFILES is used in building the distribution archive.
1122 common
/btrace-common.c \
1125 common
/common-debug.c \
1126 common
/common-exceptions.c \
1127 common
/common-regcache.c \
1128 common
/common-utils.c \
1132 common
/filestuff.c \
1134 common
/job-control.c \
1135 common
/gdb_tilde_expand.c \
1138 common
/print-utils.c \
1141 common
/run-time-clock.c \
1144 common
/signals-state-save-restore.c \
1146 common
/xml-utils.c \
1148 $(SUBDIR_TARGET_SRCS
) \
1150 $(SUBDIR_GCC_COMPILE_SRCS
)
1152 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
1154 # Header files that need to have srcdir added. Note that in the cases
1155 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1156 # so that each .h file is listed exactly once (M-x tags-search works
1157 # wrong if TAGS has files twice). Because this is tricky to get
1158 # right, it is probably easiest just to list .h files here directly.
1160 HFILES_NO_SRCDIR
= \
1166 amd64-darwin-tdep.h \
1167 amd64-linux-tdep.h \
1208 dwarf2-frame-tailcall.h \
1233 gdb_proc_service.h \
1250 hppa-linux-offsets.h \
1253 i386-darwin-tdep.h \
1258 ia64-libunwind-tdep.h \
1311 ppc-ravenscar-thread.h \
1318 progspace-and-thread.h \
1322 ravenscar-thread.h \
1356 sparc-ravenscar-thread.h \
1367 target-descriptions.h \
1397 arch
/aarch64-insn.h \
1407 common
/common-debug.h \
1408 common
/common-defs.h \
1409 common
/common-exceptions.h \
1410 common
/common-gdbthread.h \
1411 common
/common-regcache.h \
1412 common
/common-types.h \
1413 common
/common-utils.h \
1414 common
/job-control.h \
1419 common
/gdb_assert.h \
1420 common
/gdb_tilde_expand.h \
1421 common
/gdb_locale.h \
1422 common
/gdb_setjmp.h \
1423 common
/gdb_signals.h \
1424 common
/gdb_sys_time.h \
1427 common
/common-inferior.h \
1428 common
/host-defs.h \
1429 common
/print-utils.h \
1433 common
/run-time-clock.h \
1434 common
/signals-state-save-restore.h \
1438 common
/x86-xstate.h \
1439 common
/xml-utils.h \
1443 config
/djgpp
/langinfo.h \
1444 config
/djgpp
/nl_types.h \
1445 config
/i386
/nm-fbsd.h \
1446 config
/i386
/nm-i386gnu.h \
1447 config
/sparc
/nm-sol2.h \
1448 gnulib
/import
/inttypes.in.h \
1449 gnulib
/import
/stddef.in.h \
1450 gnulib
/import
/stdint.in.h \
1451 gnulib
/import
/str-two-way.h \
1452 gnulib
/import
/string.in.h \
1453 gnulib
/import
/extra
/snippet
/arg-nonnull.h \
1454 gnulib
/import
/extra
/snippet
/c
++defs.h \
1455 gnulib
/import
/extra
/snippet
/warn-on-use.h \
1463 nat
/aarch64-linux.h \
1464 nat
/aarch64-linux-hw-point.h \
1465 nat
/amd64-linux-siginfo.h \
1467 nat
/gdb_thread_db.h \
1468 nat
/fork-inferior.h \
1469 nat
/linux-btrace.h \
1470 nat
/linux-namespaces.h \
1472 nat
/linux-osdata.h \
1473 nat
/linux-personality.h \
1474 nat
/linux-ptrace.h \
1475 nat
/linux-waitpid.h \
1476 nat
/mips-linux-watch.h \
1480 nat
/x86-gcc-cpuid.h \
1482 nat
/x86-linux-dregs.h \
1484 python
/py-events.h \
1485 python
/py-stopevent.h \
1487 python
/python-internal.h \
1488 regformats
/regdef.h \
1492 target
/waitstatus.h \
1506 tui
/tui-wingeneral.h \
1509 # Header files that already have srcdir in them, or which are in objdir.
1511 HFILES_WITH_SRCDIR
= \
1515 # GDB "info" files, which should be included in their entirety
1516 INFOFILES
= gdb.
info*
1518 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1519 # default their values the way we do for SER_HARDWIRE; in the future
1520 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1521 # variables analogous to SER_HARDWIRE which get defaulted in this
1524 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
1525 $(REMOTE_OBS
) $(SIM_OBS
)
1527 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
1528 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1529 # and it's more useful to see it in the .y file.
1530 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
1532 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
1534 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
1540 common-exceptions.o \
1550 gdb_tilde_expand.o \
1560 signals-state-save-restore.o \
1565 $(patsubst %.c
,%.o
,$(COMMON_SFILES
)) \
1566 $(SUBDIR_TARGET_OBS
) \
1567 $(SUBDIR_GCC_COMPILE_OBS
)
1571 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1572 CLEANDIRS
= $(SUBDIRS
)
1574 # List of subdirectories in the build tree that must exist.
1575 # This is used to force build failures in existing trees when
1576 # a new directory is added.
1577 # The format here is for the `case' shell command.
1578 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1580 # Parser intermediate files.
1593 # ada-lex.c is included by another file, so it shouldn't wind up as a
1595 YYOBJ
= $(filter-out ada-lex.o
,$(patsubst %.c
,%.o
,$(YYFILES
)))
1597 # Things which need to be built when making a distribution.
1599 DISTSTUFF
= $(YYFILES
)
1602 # All generated files which can be included by another file.
1611 $(NAT_GENERATED_FILES
)
1613 # Flags needed to compile Python code
1614 PYTHON_CFLAGS
= @PYTHON_CFLAGS@
1616 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1617 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1619 # Rule for compiling .c files in the top-level gdb directory.
1620 # The order-only dependencies ensure that we create the build subdirectories.
1621 %.o
: %.c |
$(CONFIG_DEP_SUBDIR
)
1625 $(CONFIG_DEP_SUBDIR
):
1626 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$@
1628 # Python files need special flags.
1629 python
/%.o
: INTERNAL_CFLAGS
+= $(PYTHON_CFLAGS
)
1631 # Rules for compiling .c files in the various source subdirectories.
1632 %.o
: ${srcdir}/common
/%.c
1636 %.o
: $(srcdir)/gdbtk
/generic
/%.c
1637 $(COMPILE
) $(all_gdbtk_cflags
) $<
1640 %.o
: ${srcdir}/nat
/%.c
1644 # Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
1645 # object file generate by gdb/agent.c.
1646 common-agent.o
: $(srcdir)/common
/agent.c
1647 $(COMPILE
) $(srcdir)/common
/agent.c
1652 # The check target can not use subdir_do, because subdir_do does not
1653 # use TARGET_FLAGS_TO_PASS.
1655 @if
[ -f testsuite
/Makefile
]; then \
1656 rootme
=`pwd`; export rootme
; \
1657 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1659 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1663 @if
[ -f testsuite
/Makefile
]; then \
1664 rootme
=`pwd`; export rootme
; \
1665 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1667 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1671 @if
[ -f testsuite
/Makefile
]; then \
1672 rootme
=`pwd`; export rootme
; \
1673 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1675 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-read1
; \
1678 check-parallel
: force
1679 @if
[ -f testsuite
/Makefile
]; then \
1680 rootme
=`pwd`; export rootme
; \
1681 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1683 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-parallel
; \
1686 # The idea is to parallelize testing of multilibs, for example:
1687 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1688 # will run 3 concurrent sessions of check, eventually testing all 10
1689 # combinations. GNU make is required for the % pattern to work, as is
1690 # a shell that expands alternations within braces. If GNU make is not
1691 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1692 # prevent serialized checking due to the passed RUNTESTFLAGS.
1693 # FIXME: use config.status --config not --version, when available.
1695 @if
[ -f testsuite
/config.status
]; then \
1696 rootme
=`pwd`; export rootme
; \
1697 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1698 target
=`echo "$@" | sed 's,//.*,,'`; \
1699 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1700 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1701 testdir
=testsuite.
$$vardots; \
1702 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1703 configargs
=`cd testsuite && ./config.status --version | \
1704 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1705 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1707 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1708 "\"--srcdir=\$$rootsrc/testsuite\"" \
1710 else :; fi
&& cd
$$testdir && \
1711 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1712 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1713 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1717 # The set of headers checked by 'check-headers' by default.
1718 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1720 # Try to compile each header in isolation, thus ensuring headers are
1723 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1727 # make check-headers CHECK_HEADERS="header.h list.h"
1729 # to check specific headers.
1732 @echo Checking headers.
1733 for i in
$(CHECK_HEADERS
) ; do \
1734 $(CXX
) $(CXX_DIALECT
) -x c
++-header
-c
-fsyntax-only \
1735 $(INTERNAL_CFLAGS
) -include defs.h
$(srcdir)/$$i ; \
1737 .PHONY
: check-headers
1739 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1740 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1742 # Traditionally "install" depends on "all". But it may be useful
1743 # not to; for example, if the user has made some trivial change to a
1744 # source file and doesn't care about rebuilding or just wants to save the
1745 # time it takes for make to check that all is up to date.
1746 # install-only is intended to address that need.
1748 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1750 install-only
: $(CONFIG_INSTALL
)
1751 transformed_name
=`t='$(program_transform_name)'; \
1752 echo gdb | sed -e "$$t"` ; \
1753 if
test "x$$transformed_name" = x
; then \
1754 transformed_name
=gdb
; \
1758 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1759 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1760 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1761 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1762 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1763 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1765 transformed_name
=`t='$(program_transform_name)'; \
1766 echo gcore | sed -e "$$t"` ; \
1767 if
test "x$$transformed_name" = x
; then \
1768 transformed_name
=gcore
; \
1772 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1773 $(INSTALL_SCRIPT
) gcore \
1774 $(DESTDIR
)$(bindir)/$$transformed_name; \
1776 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1779 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1780 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1781 `test -z '$(STRIP)' || \
1782 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1785 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1788 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1790 uninstall: force $(CONFIG_UNINSTALL
)
1791 transformed_name
=`t='$(program_transform_name)'; \
1792 echo gdb | sed -e $$t` ; \
1793 if
test "x$$transformed_name" = x
; then \
1794 transformed_name
=gdb
; \
1798 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1799 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1800 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1802 transformed_name
=`t='$(program_transform_name)'; \
1803 echo gcore | sed -e "$$t"` ; \
1804 if
test "x$$transformed_name" = x
; then \
1805 transformed_name
=gcore
; \
1809 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1811 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1813 # The C++ name parser can be built standalone for testing.
1814 test-cp-name-parser.o
: cp-name-parser.c
1815 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1818 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1819 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1820 test-cp-name-parser.o
$(LIBIBERTY
)
1822 # We do this by grepping through sources. If that turns out to be too slow,
1823 # maybe we could just require every .o file to have an initialization routine
1824 # of a given name (top.o -> _initialize_top, etc.).
1826 # Formatting conventions: The name of the _initialize_* routines must start
1827 # in column zero, and must not be inside #if.
1829 # Note that the set of files with init functions might change, or the names
1830 # of the functions might change, so this files needs to depend on all the
1831 # object files that will be linked into gdb.
1833 # FIXME: There is a problem with this approach - init.c may force
1834 # unnecessary files to be linked in.
1836 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1837 # the first call is to _initialize_gdbtypes (implemented by explicitly
1838 # putting that function's name first in the init.l-tmp file). This is
1839 # a hack to ensure that all the architecture dependant global
1840 # builtin_type_* variables are initialized before anything else
1841 # (per-architecture code is called in the same order that it is
1842 # registered). The ``correct fix'' is to have all the builtin types
1843 # made part of the architecture and initialize them on-demand (using
1844 # gdbarch_data) just like everything else. The catch is that other
1845 # modules still take the address of these builtin types forcing them
1846 # to be variables, sigh!
1848 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1849 # anchored on the first column and excludes the ``/'' character so
1850 # that it doesn't add the $(srcdir) prefix to any file that already
1851 # has an absolute path. It turns out that $(DEC)'s True64 make
1852 # automatically adds the $(srcdir) prefixes when it encounters files
1853 # in sub-directories such as cli/ and mi/.
1855 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1856 # duplicates. Files in the gdb/ directory can end up appearing in
1857 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1859 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
) $(SUBDIR_GCC_COMPILE_SRCS
)
1860 init.c
: $(INIT_FILES
)
1862 @
rm -f init.c-tmp init.l-tmp
1864 @echo gdbtypes
> init.l-tmp
1865 @
-LANG
=C
; export LANG
; \
1866 LC_ALL
=C
; export LC_ALL
; \
1867 echo
$(INIT_FILES
) | \
1870 -e
'/^gdbtypes.[co]$$/d' \
1871 -e
'/^init.[co]$$/d' \
1872 -e
'/xdr_ld.[co]$$/d' \
1873 -e
'/xdr_ptrace.[co]$$/d' \
1874 -e
'/xdr_rdb.[co]$$/d' \
1875 -e
'/udr.[co]$$/d' \
1876 -e
'/udip2soc.[co]$$/d' \
1877 -e
'/udi2go32.[co]$$/d' \
1878 -e
'/version.[co]$$/d' \
1879 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1880 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1881 -e
's/-exp\.o$$/-exp.y/' \
1882 -e
's/\.[co]$$/.c/' \
1883 -e
's,signals\.c,common/signals\.c,' \
1884 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1886 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1891 * ) echo
$$f ; fs
="$$fs $$f";; \
1894 @echo
'/* Do not modify this file. */' >>init.c-tmp
1895 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1896 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1897 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1898 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1899 @echo
'void' >>init.c-tmp
1900 @echo
'initialize_all_files (void)' >>init.c-tmp
1901 @echo
'{' >>init.c-tmp
1902 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1903 @echo
'}' >>init.c-tmp
1905 @mv init.c-tmp init.c
1909 # Create a library of the gdb object files and build GDB by linking
1912 # init.o is very important. It pulls in the rest of GDB.
1913 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1914 libgdb.a
: $(LIBGDB_OBS
)
1916 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1919 # Removing the old gdb first works better if it is running, at least on SunOS.
1920 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1922 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1923 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1924 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1926 # Convenience rule to handle recursion.
1927 $(LIBGNU
) $(GNULIB_H
): all-lib
1928 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1929 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1932 # Convenience rule to handle recursion.
1933 .PHONY
: all-data-directory
1934 all-data-directory
: data-directory
/Makefile
1935 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1937 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1938 # on itself without copying the executable. So "make gdb1" will make
1939 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1940 # Removing gdb1 before the copy is the right thing if gdb1 is open
1941 # in another process.
1942 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1944 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1946 # Put the proper machine-specific files first, so M-. on a machine
1947 # specific routine gets the one for the correct machine. (FIXME: those
1948 # files go in twice; we should be removing them from the main list).
1950 # TAGS depends on all the files that go into it so you can rebuild TAGS
1951 # with `make TAGS' and not have to say `rm TAGS' first.
1953 GDB_NM_FILE
= @GDB_NM_FILE@
1954 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1956 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1957 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1958 echo $(srcdir)/$$i ; \
1959 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1961 done) | sed -e 's/\.o$$/\.c/'` \
1962 `find $(srcdir)/config -name '*.h' -print`
1966 clean mostlyclean: $(CONFIG_CLEAN
)
1967 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1968 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1969 rm -f init.c version.c observer.h observer.inc
1970 rm -f gdb
$(EXEEXT
) core make.log
1971 rm -f gdb
[0-9]$(EXEEXT
)
1972 rm -f test-cp-name-parser
$(EXEEXT
)
1973 rm -f xml-builtin.c stamp-xml
1975 for i in
$(CONFIG_SRC_SUBDIR
); do \
1977 rm -f
$$i/$(DEPDIR
)/*; \
1980 # This used to depend on c-exp.c m2-exp.c TAGS
1981 # I believe this is wrong; the makefile standards for distclean just
1982 # describe removing files; the only sort of "re-create a distribution"
1983 # functionality described is if the distributed files are unmodified.
1984 # NB: While GDBSERVER might be configured on native systems, it isn't
1985 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1987 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1988 rm -rf
$(GNULIB_BUILDDIR
)
1989 rm -f gdbserver
/config.status gdbserver
/config.log
1990 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1991 rm -f gdbserver
/Makefile gdbserver
/config.cache
1992 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1993 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1994 rm -f config.log config.cache
1997 for i in
$(CONFIG_SRC_SUBDIR
); do \
1998 rmdir
$$i/$(DEPDIR
); \
2001 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
2002 realclean: maintainer-clean
2004 local-maintainer-clean
:
2005 @echo
"This command is intended for maintainers to use;"
2006 @echo
"it deletes files that may require special tools to rebuild."
2009 ada-lex.c ada-exp.c \
2010 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
2011 rm -f TAGS
$(INFOFILES
)
2013 rm -f nm.h config.status
2015 do-maintainer-clean
:
2016 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
2019 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
2020 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
2023 @for i in
$(DODIRS
); do \
2025 $(REQUIRED_SUBDIRS
)) \
2026 if
[ ! -f .
/$$i/Makefile
] ; then \
2027 echo
"Missing $$i/Makefile" >&2 ; \
2031 if
[ -f .
/$$i/Makefile
] ; then \
2033 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
2034 else exit
1 ; fi
; \
2038 Makefile
: Makefile.in config.status
2039 # Regenerate the Makefile and the tm.h / nm.h links.
2040 CONFIG_FILES
="Makefile" \
2043 $(SHELL
) config.status
2045 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status
2046 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
2047 CONFIG_COMMANDS
="depfiles" \
2050 $(SHELL
) config.status
2052 data-directory
/Makefile
: data-directory
/Makefile.in config.status
2053 CONFIG_FILES
="data-directory/Makefile" \
2054 CONFIG_COMMANDS
="depfiles" \
2057 $(SHELL
) config.status
2061 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
2063 jit-reader.h
: $(srcdir)/jit-reader.in
2064 $(SHELL
) config.status
$@
2066 gcore
: $(srcdir)/gcore.in
2067 $(SHELL
) config.status
$@
2069 config.h
: stamp-h
; @true
2070 stamp-h
: $(srcdir)/config.in config.status
2071 CONFIG_HEADERS
=config.h
:config.in \
2072 CONFIG_COMMANDS
="default depdir" \
2075 $(SHELL
) config.status
2077 config.status
: $(srcdir)/configure configure.tgt configure.host ..
/bfd
/development.sh
2078 $(SHELL
) config.status
--recheck
2081 ACLOCAL_AMFLAGS
= -I ..
/config
2083 # Keep these in sync with the includes in acinclude.m4.
2086 acx_configure_dir.m4 \
2090 ..
/config
/acinclude.m4 \
2091 ..
/config
/plugins.m4 \
2092 ..
/config
/lead-dot.m4 \
2093 ..
/config
/override.m4 \
2094 ..
/config
/largefile.m4 \
2095 ..
/config
/gettext-sister.m4 \
2096 ..
/config
/lib-ld.m4 \
2097 ..
/config
/lib-prefix.m4 \
2098 ..
/config
/lib-link.m4 \
2101 ..
/config
/depstand.m4 \
2102 ..
/config
/lcmessage.m4 \
2103 ..
/config
/codeset.m4 \
2106 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
2107 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
2110 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
2111 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
2112 cd
$(srcdir) && $(AUTOCONF
)
2114 AUTOHEADER
= autoheader
2115 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
2116 cd
$(srcdir) && $(AUTOHEADER
)
2120 # automatic rebuilding in automake-generated Makefiles requires
2121 # this rule in the toplevel Makefile, which, with GNU make, causes
2122 # the desired updates through the implicit regeneration of the Makefile
2123 # and all of its prerequisites.
2130 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2132 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
2134 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2136 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
2138 # GDB MANUAL: TeX dvi file
2140 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
2142 # GDB MANUAL: info file
2144 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
2146 # Make copying.c from COPYING
2147 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
2148 awk
-f
$(srcdir)/copying.awk \
2149 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
2150 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
2152 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
2153 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
2154 $(host_alias
) $(target_alias
) version.c
2156 observer.h
: observer.sh doc
/observer.texi
2157 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
2159 observer.inc
: observer.sh doc
/observer.texi
2160 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
2163 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
2164 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
2166 gdb.cxref
: $(SFILES
)
2167 cxref
-I.
$(SFILES
) >gdb.cxref
2171 # GNU Make has an annoying habit of putting *all* the Makefile variables
2172 # into the environment, unless you include this target as a circumvention.
2173 # Rumor is that this will be fixed (and this target can be removed)
2177 # GNU Make 3.63 has a different problem: it keeps tacking command line
2178 # overrides onto the definition of $(MAKE). This variable setting
2183 aarch64-fbsd-nat.c \
2184 aarch64-fbsd-tdep.c \
2185 aarch64-linux-nat.c \
2186 aarch64-linux-tdep.c \
2187 aarch64-newlib-tdep.c \
2193 alpha-linux-tdep.c \
2194 alpha-mdebug-tdep.c \
2199 amd64-darwin-tdep.c \
2200 amd64-dicos-tdep.c \
2204 amd64-linux-tdep.c \
2217 arm-get-next-pcs.c \
2224 arm-symbian-tdep.c \
2251 i386-cygwin-tdep.c \
2253 i386-darwin-tdep.c \
2270 ia64-libunwind-tdep.c \
2291 microblaze-linux-tdep.c \
2303 mips64-obsd-tdep.c \
2308 nios2-linux-tdep.c \
2321 ppc-ravenscar-thread.c \
2325 ravenscar-thread.c \
2328 rs6000-lynx178-tdep.c \
2348 sparc-linux-tdep.c \
2353 sparc-ravenscar-thread.c \
2357 sparc64-fbsd-nat.c \
2358 sparc64-fbsd-tdep.c \
2359 sparc64-linux-nat.c \
2360 sparc64-linux-tdep.c \
2362 sparc64-nbsd-nat.c \
2363 sparc64-nbsd-tdep.c \
2364 sparc64-obsd-nat.c \
2365 sparc64-obsd-tdep.c \
2366 sparc64-sol2-tdep.c \
2371 tilegx-linux-nat.c \
2372 tilegx-linux-tdep.c \
2384 xtensa-linux-nat.c \
2385 xtensa-linux-tdep.c \
2388 common
/mingw-strerror.c \
2389 common
/posix-strerror.c
2391 # Some files need explicit build rules (due to -Werror problems) or due
2392 # to sub-directory fun 'n' games.
2394 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
2395 # checks format strings.
2396 printcmd.o
: $(srcdir)/printcmd.c
2397 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
2398 $(COMPILE.post
) $(srcdir)/printcmd.c
2401 # Same for "target-float.c".
2402 target-float.o
: $(srcdir)/target-float.c
2403 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
2404 $(COMPILE.post
) $(srcdir)/target-float.c
2406 # ada-exp.c can appear in srcdir, for releases; or in ., for
2407 # development builds.
2408 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2410 # Some versions of flex give output that triggers
2411 # -Wold-style-definition.
2412 ada-exp.o
: ada-exp.c
2413 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
2414 $(COMPILE.post
) $(ADA_EXP_C
)
2417 # Message files. Based on code in gcc/Makefile.in.
2419 # Rules for generating translated message descriptions. Disabled by
2420 # autoconf if the tools are not available.
2422 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
2426 # This notation should be acceptable to all Make implementations used
2427 # by people who are interested in updating .po files.
2428 update-po
: $(CATALOGS
:.gmo
=.pox
)
2430 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
2433 -test -d po || mkdir po
2434 $(GMSGFMT
) --statistics
-o
$@
$<
2436 # The new .po has to be gone over by hand, so we deposit it into
2437 # build/po with a different extension. If build/po/$(PACKAGE).pot
2438 # exists, use it (it was just created), else use the one in srcdir.
2440 -test -d po || mkdir po
2441 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
2442 then echo po/$(PACKAGE).pot; \
2443 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
2445 # This rule has to look for .gmo modules in both srcdir and the cwd,
2446 # and has to check that we actually have a catalog for each language,
2447 # in case they weren't built or included with the distribution.
2449 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
2450 cats
="$(CATALOGS)"; for cat in
$$cats; do \
2451 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
2452 if
[ -f
$$cat ]; then
:; \
2453 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
2456 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
2457 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
2458 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
2459 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2460 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2463 cats
="$(CATALOGS)"; for cat in
$$cats; do \
2464 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
2465 if
[ -f
$$cat ]; then
:; \
2466 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
2469 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
2470 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
2472 # Delete po/*.gmo only if we are not building in the source directory.
2474 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
2476 # Rule for regenerating the message template (gdb.pot). Instead of
2477 # forcing everyone to edit POTFILES.in, which proved impractical, this
2478 # rule has no dependencies and always regenerates gdb.pot. This is
2479 # relatively harmless since the .po files do not directly depend on
2480 # it. The .pot file is left in the build directory. Since GDB's
2481 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2482 # files) force this rule.
2483 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
2484 po
/$(PACKAGE
).pot
: force
2485 -test -d po || mkdir po
2486 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
2490 # YACC/LEX dependencies
2492 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2493 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
2494 # said LANG-exp.c rather than ./c-exp.c some makes would
2495 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
2496 # decls for malloc/realloc/free which conflict with everything else.
2497 # Strictly speaking c-exp.c should therefore depend on
2498 # Makefile.in, but that was a pretty big annoyance.
2502 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
2503 ||
(rm -f
$@
; false
)
2504 sed
-e
'/extern.*malloc/d' \
2505 -e
'/extern.*realloc/d' \
2506 -e
'/extern.*free/d' \
2507 -e
'/include.*malloc.h/d' \
2508 -e
's/\([^x]\)malloc/\1xmalloc/g' \
2509 -e
's/\([^x]\)realloc/\1xrealloc/g' \
2510 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2511 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
2512 -e
'/^#line.*y.tab.c/d' \
2513 -e
's/YY_NULL/YY_NULLPTR/g' \
2517 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
2518 $(FLEX
) -o
$@
$< && \
2520 sed
-e
'/extern.*malloc/d' \
2521 -e
'/extern.*realloc/d' \
2522 -e
'/extern.*free/d' \
2523 -e
'/include.*malloc.h/d' \
2524 -e
's/\([^x]\)malloc/\1xmalloc/g' \
2525 -e
's/\([^x]\)realloc/\1xrealloc/g' \
2526 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2527 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
2528 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
2532 elif
[ -f
$@
]; then \
2533 echo
"Warning: $*.c older than $*.l and flex not available."; \
2535 echo
"$@ missing and flex not available."; \
2539 .PRECIOUS
: ada-lex.c
2543 xml-builtin.c
: stamp-xml
; @true
2544 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
2545 rm -f xml-builtin.tmp
2547 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
2548 xml-builtin.tmp
$(XMLFILES
)
2549 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
2550 echo stamp
> stamp-xml
2552 .PRECIOUS
: xml-builtin.c
2555 # GDBTK sub-directory
2558 all-gdbtk
: insight
$(EXEEXT
)
2561 transformed_name
=`t='$(program_transform_name)'; \
2562 echo insight | sed -e $$t` ; \
2563 if
test "x$$transformed_name" = x
; then \
2564 transformed_name
=insight
; \
2568 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
2569 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
2570 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2571 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2572 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
2573 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2574 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
2575 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
2576 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
2577 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2578 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
2579 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
2580 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2581 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
2582 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
2583 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
2584 cd
$(srcdir)/gdbtk
/library
; \
2585 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
2587 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
2591 transformed_name
=`t='$(program_transform_name)'; \
2592 echo insight | sed -e $$t` ; \
2593 if
test "x$$transformed_name" = x
; then \
2594 transformed_name
=insight
; \
2598 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2599 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
2602 rm -f insight
$(EXEEXT
)
2604 # Removing the old gdb first works better if it is running, at least on SunOS.
2605 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
2606 $(CDEPS
) $(TDEPLIBS
)
2607 rm -f insight
$(EXEEXT
)
2608 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2609 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
2610 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2612 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
2613 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
2615 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
2616 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
2618 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
2619 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
2622 # Dependency tracking.
2625 ifeq ($(DEPMODE
),depmode
=gcc3
)
2626 # Note that we put the dependencies into a .Tpo file, then move them
2627 # into place if the compile succeeds. We need this because gcc does
2628 # not atomically write the dependency output file.
2629 override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2630 -MF
$(@D
)/$(DEPDIR
)/$(basename $(@F
)).Tpo
2631 override POSTCOMPILE
= @mv
$(@D
)/$(DEPDIR
)/$(basename $(@F
)).Tpo \
2632 $(@D
)/$(DEPDIR
)/$(basename $(@F
)).Po
2634 override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2635 DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) \
2636 $(CXX
) -x c
++ $(CXX_DIALECT
)
2637 # depcomp handles atomicity for us, so we don't need a postcompile
2639 override POSTCOMPILE
=
2642 # A list of all the objects we might care about in this build, for
2643 # dependency tracking.
2644 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2645 test-cp-name-parser.o
2647 # Ensure that generated files are created early. Use order-only
2648 # dependencies if available. They require GNU make 3.80 or newer,
2649 # and the .VARIABLES variable was introduced at the same time.
2651 $(all_object_files
): |
$(generated_files
)
2653 $(all_object_files
) : $(generated_files
)
2657 -include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2659 # Disable implicit make rules.
2660 include $(srcdir)/disable-implicit-rules.mk
2662 ### end of the gdb Makefile.in.