gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 prefix = @prefix@
  21 exec_prefix = @exec_prefix@
  22
  23 host_alias = @host_alias@
  24 target_alias = @target_alias@
  25 program_transform_name = @program_transform_name@
  26 bindir = @bindir@
  27 libdir = @libdir@
  28 tooldir = $(libdir)/$(target_alias)
  29
  30 datadir = @datadir@
  31 localedir = @localedir@
  32 mandir = @mandir@
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = @infodir@
  43 datarootdir = @datarootdir@
  44 docdir = @docdir@
  45 htmldir = @htmldir@
  46 pdfdir = @pdfdir@
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 MAKEHTML = $(MAKEINFO) --html
 115 MAKEHTMLFLAGS =
 116
 117 # Set this up with gcc if you have gnu ld and the loader will print out
 118 # line numbers for undefined references.
 119 #CC_LD=gcc -static
 120 CC_LD=$(CC)
 121
 122 # Where is our "include" directory?  Typically $(srcdir)/../include.
 123 # This is essentially the header file directory for the library
 124 # routines in libiberty.
 125 INCLUDE_DIR =  $(srcdir)/../include
 126 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 127
 128 # Where is the "-liberty" library?  Typically in ../libiberty.
 129 LIBIBERTY = ../libiberty/libiberty.a
 130
 131 # Where is the BFD library?  Typically in ../bfd.
 132 BFD_DIR = ../bfd
 133 BFD = $(BFD_DIR)/libbfd.a
 134 BFD_SRC = $(srcdir)/$(BFD_DIR)
 135 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 136
 137 # Where is the decnumber library?  Typically in ../libdecnumber.
 138 LIBDECNUMBER_DIR = ../libdecnumber
 139 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 140 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 141 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 142
 143 # Where is the READLINE library?  Typically in ../readline.
 144 READLINE_DIR = ../readline
 145 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 146 READLINE = @READLINE@
 147 READLINE_DEPS = @READLINE_DEPS@
 148 READLINE_CFLAGS = @READLINE_CFLAGS@
 149
 150 # Where is expat?  This will be empty if expat was not available.
 151 LIBEXPAT = @LIBEXPAT@
 152
 153 WARN_CFLAGS = @WARN_CFLAGS@
 154 WERROR_CFLAGS = @WERROR_CFLAGS@
 155 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 156 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 157
 158 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 159
 160 # Where is the INTL library?  Typically in ../intl.
 161 INTL = @LIBINTL@
 162 INTL_DEPS = @LIBINTL_DEP@
 163 INTL_CFLAGS = @INCINTL@
 164
 165 # Did the user give us a --with-sysroot option?
 166 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 167 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 168
 169 # Did the user give us a --with-gdb-datadir option?
 170 GDB_DATADIR = @GDB_DATADIR@
 171
 172 # Helper code from gnulib.
 173 LIBGNU = gnulib/libgnu.a
 174 INCGNU = -I$(srcdir)/gnulib -Ignulib
 175
 176 # Generated headers in the gnulib directory.  These must be listed
 177 # so that they are generated before other files are compiled.
 178 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 179
 180 #
 181 # CLI sub directory definitons
 182 #
 183 SUBDIR_CLI_OBS = \
 184         cli-dump.o \
 185         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
 186         cli-logging.o \
 187         cli-interp.o
 188 SUBDIR_CLI_SRCS = \
 189         cli/cli-dump.c \
 190         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 191         cli/cli-logging.c \
 192         cli/cli-interp.c
 193 SUBDIR_CLI_DEPS =
 194 SUBDIR_CLI_LDFLAGS=
 195 SUBDIR_CLI_CFLAGS=
 196
 197 #
 198 # MI sub directory definitons
 199 #
 200 SUBDIR_MI_OBS = \
 201         mi-out.o mi-console.o \
 202         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 203         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 204         mi-interp.o \
 205         mi-main.o mi-parse.o mi-getopt.o
 206 SUBDIR_MI_SRCS = \
 207         mi/mi-out.c mi/mi-console.c \
 208         mi/mi-cmds.c mi/mi-cmd-env.c \
 209         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 210         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 211         mi/mi-cmd-target.c mi/mi-interp.c \
 212         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
 213 SUBDIR_MI_DEPS =
 214 SUBDIR_MI_LDFLAGS=
 215 SUBDIR_MI_CFLAGS= \
 216         -DMI_OUT=1
 217
 218 #
 219 # TUI sub directory definitions
 220 #
 221
 222 # Name of the TUI program
 223 TUI=gdbtui
 224
 225 SUBDIR_TUI_OBS = \
 226         tui-command.o \
 227         tui-data.o \
 228         tui-disasm.o \
 229         tui-file.o tui.o \
 230         tui-hooks.o \
 231         tui-interp.o \
 232         tui-io.o \
 233         tui-layout.o \
 234         tui-out.o \
 235         tui-regs.o \
 236         tui-source.o \
 237         tui-stack.o \
 238         tui-win.o \
 239         tui-windata.o \
 240         tui-wingeneral.o \
 241         tui-winsource.o
 242 SUBDIR_TUI_SRCS = \
 243         tui/tui-command.c \
 244         tui/tui-data.c \
 245         tui/tui-disasm.c \
 246         tui/tui-file.c \
 247         tui/tui-hooks.c \
 248         tui/tui-interp.c \
 249         tui/tui-io.c \
 250         tui/tui-layout.c \
 251         tui/tui-out.c \
 252         tui/tui-regs.c \
 253         tui/tui-source.c \
 254         tui/tui-stack.c \
 255         tui/tui-win.c \
 256         tui/tui-windata.c \
 257         tui/tui-wingeneral.c \
 258         tui/tui-winsource.c \
 259         tui/tui.c
 260 SUBDIR_TUI_DEPS =
 261 SUBDIR_TUI_LDFLAGS=
 262 SUBDIR_TUI_CFLAGS= \
 263         -DTUI=1
 264
 265 #
 266 # python sub directory definitons
 267 #
 268 SUBDIR_PYTHON_OBS = \
 269         python.o \
 270         py-block.o \
 271         py-cmd.o \
 272         py-frame.o \
 273         py-function.o \
 274         py-lazy-string.o \
 275         py-objfile.o \
 276         py-prettyprint.o \
 277         py-symbol.o \
 278         py-symtab.o \
 279         py-type.o \
 280         py-utils.o \
 281         py-value.o
 282 SUBDIR_PYTHON_SRCS = \
 283         python/python.c \
 284         python/py-block.c \
 285         python/py-cmd.c \
 286         python/py-frame.c \
 287         python/py-function.c \
 288         python/py-lazy-string.c \
 289         python/py-objfile.c \
 290         python/py-prettyprint.c \
 291         python/py-symbol.c \
 292         python/py-symtab.c \
 293         python/py-type.c \
 294         python/py-utils.c \
 295         python/py-value.c
 296 SUBDIR_PYTHON_DEPS =
 297 SUBDIR_PYTHON_LDFLAGS=
 298 SUBDIR_PYTHON_CFLAGS=
 299
 300
 301 # Opcodes currently live in one of two places.  Either they are in the
 302 # opcode library, typically ../opcodes, or they are in a header file
 303 # in INCLUDE_DIR.
 304 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 305 # disassemblers?
 306 OPCODES_DIR = ../opcodes
 307 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 308 OPCODES = $(OPCODES_DIR)/libopcodes.a
 309 # Where are the other opcode tables which only have header file
 310 # versions?
 311 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 312 # Some source files like to use #include "opcodes/file.h"
 313 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
 314
 315 # The simulator is usually nonexistent; targets that include one
 316 # should set this to list all the .o or .a files to be linked in.
 317 SIM = @SIM@
 318
 319 WIN32LIBS = @WIN32LIBS@
 320
 321 # Tcl et al cflags and libraries
 322 TCL = @TCL_LIBRARY@
 323 TCL_CFLAGS = @TCL_INCLUDE@
 324 GDBTKLIBS = @GDBTKLIBS@
 325 # Extra flags that the GDBTK files need:
 326 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 327
 328 TK = @TK_LIBRARY@
 329 TK_CFLAGS = @TK_INCLUDE@
 330
 331 X11_CFLAGS = @TK_XINCLUDES@
 332 X11_LDFLAGS =
 333 X11_LIBS =
 334
 335 WIN32LDAPP = @WIN32LDAPP@
 336
 337 LIBGUI = @LIBGUI@
 338 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 339 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 340
 341 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 342
 343 # The version of gdbtk we're building. This should be kept
 344 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 345 GDBTK_VERSION = 1.0
 346 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 347
 348 # Gdbtk requires an absolute path to the source directory or
 349 # the testsuite won't run properly.
 350 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 351
 352 SUBDIR_GDBTK_OBS = \
 353         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 354         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 355 SUBDIR_GDBTK_SRCS = \
 356         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 357         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 358         gdbtk/generic/gdbtk-interp.c \
 359         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 360         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 361         gdbtk/generic/gdbtk-main.c
 362 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 363 SUBDIR_GDBTK_LDFLAGS=
 364 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 365
 366 CONFIG_OBS= @CONFIG_OBS@
 367 CONFIG_SRCS= @CONFIG_SRCS@
 368 CONFIG_DEPS= @CONFIG_DEPS@
 369 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 370 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 371 CONFIG_ALL= @CONFIG_ALL@
 372 CONFIG_CLEAN= @CONFIG_CLEAN@
 373 CONFIG_INSTALL = @CONFIG_INSTALL@
 374 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 375
 376 # -I. for config files.
 377 # -I$(srcdir) for gdb internal headers.
 378 # -I$(srcdir)/config for more generic config files.
 379
 380 # It is also possible that you will need to add -I/usr/include/sys if
 381 # your system doesn't have fcntl.h in /usr/include (which is where it
 382 # should be according to Posix).
 383 DEFS = @DEFS@
 384 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
 385         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 386
 387 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 388 GLOBAL_CFLAGS = $(MH_CFLAGS)
 389
 390 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 391
 392 # CFLAGS is specifically reserved for setting from the command line
 393 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 394 CFLAGS = @CFLAGS@
 395
 396 # Set by configure, for e.g. expat.
 397 INTERNAL_CPPFLAGS = @CPPFLAGS@
 398
 399 # Need to pass this to testsuite for "make check".  Probably should be
 400 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 401 # so "make check" has the same result no matter where it is run.
 402 CXXFLAGS = -g -O
 403
 404 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 405 INTERNAL_CFLAGS_BASE = \
 406         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 407         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 408         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 409         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 410 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 411 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 412
 413 # LDFLAGS is specifically reserved for setting from the command line
 414 # when running make.
 415 LDFLAGS = @LDFLAGS@
 416
 417 # Profiling options need to go here to work.
 418 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 419 # and have it work; that's why CFLAGS is here.
 420 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 421 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 422
 423 # If your system is missing alloca(), or, more likely, it's there but
 424 # it doesn't work, then refer to libiberty.
 425
 426 # Libraries and corresponding dependencies for compiling gdb.
 427 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 428 # LIBIBERTY appears twice on purpose.
 429 # If you have the Cygnus libraries installed,
 430 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 431 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 432         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 433         -lintl -liberty $(LIBGNU)
 434 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 435         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 436         $(LIBEXPAT) \
 437         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 438 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 439         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 440
 441 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 442 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 443
 444 DIST=gdb
 445
 446 LINT=/usr/5bin/lint
 447 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 448         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 449         $(INTL_CFLAGS)
 450
 451 RUNTEST = runtest
 452 RUNTESTFLAGS=
 453
 454 # XML files to build in to GDB.
 455 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 456         $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd \
 457         $(srcdir)/features/threads.dtd
 458
 459 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 460 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 461 # etc., then there will be (as part of the C library or perhaps as
 462 # part of libiberty) a POSIX interface.  But at least for now the
 463 # host-dependent makefile fragment might need to use something else
 464 # besides ser-unix.o
 465 SER_HARDWIRE = @SER_HARDWIRE@
 466
 467 # The `remote' debugging target is supported for most architectures,
 468 # but not all (e.g. 960)
 469 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 470
 471 # This is remote-sim.o if a simulator is to be linked in.
 472 SIM_OBS = @SIM_OBS@
 473
 474 # Target-dependent object files.
 475 TARGET_OBS = @TARGET_OBS@
 476
 477 # All target-dependent objects files that require 64-bit CORE_ADDR
 478 # (used with --enable-targets=all --enable-64-bit-bfd).
 479 ALL_64_TARGET_OBS = \
 480         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 481         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 482         amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
 483         amd64-linux-tdep.o amd64nbsd-tdep.o \
 484         amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
 485         ia64-linux-tdep.o ia64-tdep.o \
 486         mips64obsd-tdep.o \
 487         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 488         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 489
 490 # All other target-dependent objects files (used with --enable-targets=all).
 491 ALL_TARGET_OBS = \
 492         armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
 493         armnbsd-tdep.o armobsd-tdep.o \
 494         arm-tdep.o arm-wince-tdep.o \
 495         avr-tdep.o \
 496         cris-tdep.o \
 497         dicos-tdep.o \
 498         frv-linux-tdep.o frv-tdep.o \
 499         h8300-tdep.o \
 500         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 501         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 502         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 503         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 504         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 505         i386-dicos-tdep.o i386-darwin-tdep.o \
 506         iq2000-tdep.o \
 507         linux-tdep.o \
 508         lm32-tdep.o \
 509         m32c-tdep.o \
 510         m32r-linux-tdep.o m32r-tdep.o \
 511         m68hc11-tdep.o \
 512         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 513         m88k-tdep.o \
 514         mep-tdep.o \
 515         microblaze-tdep.o microblaze-linux-tdep.o \
 516         mips-irix-tdep.o mips-linux-tdep.o \
 517         mipsnbsd-tdep.o mips-tdep.o \
 518         mn10300-linux-tdep.o mn10300-tdep.o \
 519         moxie-tdep.o \
 520         mt-tdep.o \
 521         nto-tdep.o \
 522         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 523         rs6000-aix-tdep.o rs6000-tdep.o \
 524         s390-tdep.o \
 525         score-tdep.o \
 526         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 527         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 528         sparc-sol2-tdep.o sparc-tdep.o \
 529         spu-tdep.o spu-multiarch.o solib-spu.o \
 530         v850-tdep.o \
 531         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 532         xstormy16-tdep.o \
 533         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 534         glibc-tdep.o \
 535         bsd-uthread.o \
 536         nbsd-tdep.o obsd-tdep.o \
 537         sol2-tdep.o \
 538         solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 539         solib-som.o solib-pa64.o solib-darwin.o \
 540         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 541         remote-m32r-sdi.o \
 542         xcoffread.o \
 543         symfile-mem.o \
 544         corelow.o \
 545         windows-tdep.o \
 546         linux-record.o
 547
 548 # Host-dependent makefile fragment comes in here.
 549 @host_makefile_frag@
 550 # End of host-dependent makefile fragment
 551
 552 FLAGS_TO_PASS = \
 553         "prefix=$(prefix)" \
 554         "exec_prefix=$(exec_prefix)" \
 555         "infodir=$(infodir)" \
 556         "datarootdir=$(datarootdir)" \
 557         "docdir=$(docdir)" \
 558         "htmldir=$(htmldir)" \
 559         "pdfdir=$(pdfdir)" \
 560         "libdir=$(libdir)" \
 561         "mandir=$(mandir)" \
 562         "datadir=$(datadir)" \
 563         "includedir=$(includedir)" \
 564         "against=$(against)" \
 565         "DESTDIR=$(DESTDIR)" \
 566         "AR=$(AR)" \
 567         "AR_FLAGS=$(AR_FLAGS)" \
 568         "CC=$(CC)" \
 569         "CFLAGS=$(CFLAGS)" \
 570         "CXX=$(CXX)" \
 571         "CXXFLAGS=$(CXXFLAGS)" \
 572         "DLLTOOL=$(DLLTOOL)" \
 573         "LDFLAGS=$(LDFLAGS)" \
 574         "RANLIB=$(RANLIB)" \
 575         "MAKEINFO=$(MAKEINFO)" \
 576         "MAKEHTML=$(MAKEHTML)" \
 577         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 578         "INSTALL=$(INSTALL)" \
 579         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 580         "INSTALL_DATA=$(INSTALL_DATA)" \
 581         "RUNTEST=$(RUNTEST)" \
 582         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 583
 584 # Flags that we pass when building the testsuite.
 585
 586 # empty for native, $(target_alias)/ for cross
 587 target_subdir = @target_subdir@
 588
 589 CC_FOR_TARGET = ` \
 590   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 591     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 592       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 593     else \
 594       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 595     fi; \
 596   else \
 597     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 598       echo $(CC); \
 599     else \
 600       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 601     fi; \
 602   fi`
 603
 604 CXX = gcc
 605 CXX_FOR_TARGET = ` \
 606   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 607     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 608       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 609     else \
 610       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 611     fi; \
 612   else \
 613     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 614       echo $(CXX); \
 615     else \
 616       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 617     fi; \
 618   fi`
 619
 620 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 621 # duplicating the lengthy definition.
 622 TARGET_FLAGS_TO_PASS = \
 623         "prefix=$(prefix)" \
 624         "exec_prefix=$(exec_prefix)" \
 625         "against=$(against)" \
 626         'CC=$$(CC_FOR_TARGET)' \
 627         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 628         "CFLAGS=$(CFLAGS)" \
 629         'CXX=$$(CXX_FOR_TARGET)' \
 630         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 631         "CXXFLAGS=$(CXXFLAGS)" \
 632         "INSTALL=$(INSTALL)" \
 633         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 634         "INSTALL_DATA=$(INSTALL_DATA)" \
 635         "MAKEINFO=$(MAKEINFO)" \
 636         "MAKEHTML=$(MAKEHTML)" \
 637         "RUNTEST=$(RUNTEST)" \
 638         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 639         "FORCE_PARALLEL=$(FORCE_PARALLEL)"
 640
 641 # All source files that go into linking GDB.
 642 # Links made at configuration time should not be specified here, since
 643 # SFILES is used in building the distribution archive.
 644
 645 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 646         addrmap.c \
 647         auxv.c ax-general.c ax-gdb.c \
 648         bcache.c \
 649         bfd-target.c \
 650         block.c blockframe.c breakpoint.c buildsym.c \
 651         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 652         charset.c cli-out.c coffread.c coff-pe-read.c \
 653         complaints.c completer.c corefile.c \
 654         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 655         cp-name-parser.y \
 656         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 657         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 658         elfread.c environ.c eval.c event-loop.c event-top.c \
 659         exceptions.c expprint.c \
 660         f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
 661         frame.c frame-base.c frame-unwind.c \
 662         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 663         inf-loop.c \
 664         infcall.c \
 665         infcmd.c inflow.c infrun.c \
 666         inline-frame.c \
 667         interps.c \
 668         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 669         language.c linespec.c \
 670         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 671         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 672         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 673         mi/mi-common.c \
 674         objc-exp.y objc-lang.c \
 675         objfiles.c osabi.c observer.c osdata.c \
 676         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 677         progspace.c \
 678         prologue-value.c psymtab.c \
 679         regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 680         scm-exp.c scm-lang.c scm-valprint.c \
 681         sentinel-frame.c \
 682         serial.c ser-base.c ser-unix.c \
 683         solib.c solib-null.c source.c \
 684         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 685         symtab.c \
 686         target.c target-descriptions.c target-memory.c \
 687         thread.c top.c tracepoint.c \
 688         trad-frame.c \
 689         tramp-frame.c \
 690         typeprint.c \
 691         ui-out.c utils.c ui-file.h ui-file.c \
 692         user-regs.c \
 693         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 694         wrapper.c \
 695         xml-tdesc.c xml-support.c \
 696         inferior.c gdb_usleep.c \
 697         record.c gcore.c \
 698         jit.c \
 699         xml-syscall.c \
 700
 701 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 702
 703 # Header files that need to have srcdir added.  Note that in the cases
 704 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 705 # so that each .h file is listed exactly once (M-x tags-search works
 706 # wrong if TAGS has files twice).  Because this is tricky to get
 707 # right, it is probably easiest just to list .h files here directly.
 708
 709 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 710 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 711 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 712 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 713 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 714 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 715 osf-share/cma_stack_int.h osf-share/cma_init.h \
 716 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 717 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 718 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
 719 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
 720 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 721 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 722 c-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
 723 cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
 724 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 725 gnulib/string.in.h gnulib/str-two-way.h gnulib/extra/link-warning.h \
 726 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 727 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 728 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 729 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 730 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 731 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 732 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 733 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 734 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 735 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 736 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
 737 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 738 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 739 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 740 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 741 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 742 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 743 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 744 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 745 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 746 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 747 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 748 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 749 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 750 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 751 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 752 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 753 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 754 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 755 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 756 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 757 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 758 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
 759 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 760 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 761 regformats/regdef.h config/alpha/nm-osf3.h  config/i386/nm-i386gnu.h \
 762 config/i386/nm-fbsd.h config/i386/nm-i386sol2.h config/i386/nm-linux.h \
 763 config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
 764 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 765 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 766 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 767 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
 768 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \
 769 psymtab.h psympriv.h
 770
 771 # Header files that already have srcdir in them, or which are in objdir.
 772
 773 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 774
 775
 776 # GDB "info" files, which should be included in their entirety
 777 INFOFILES = gdb.info*
 778
 779 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 780
 781 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 782 # default their values the way we do for SER_HARDWIRE; in the future
 783 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 784 # variables analogous to SER_HARDWIRE which get defaulted in this
 785 # Makefile.in
 786
 787 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 788            $(REMOTE_OBS) $(SIM_OBS)
 789
 790 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 791 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 792 # and it's more useful to see it in the .y file.
 793 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 794         $(CONFIG_SRCS)
 795 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 796
 797 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 798         version.o \
 799         annotate.o \
 800         addrmap.o \
 801         auxv.o \
 802         bfd-target.o \
 803         blockframe.o breakpoint.o findvar.o regcache.o \
 804         charset.o disasm.o dummy-frame.o dfp.o \
 805         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 806         block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
 807         infcall.o \
 808         infcmd.o infrun.o \
 809         expprint.o environ.o stack.o thread.o \
 810         exceptions.o \
 811         inf-child.o \
 812         interps.o \
 813         main.o \
 814         macrotab.o macrocmd.o macroexp.o macroscope.o \
 815         mi-common.o \
 816         event-loop.o event-top.o inf-loop.o completer.o \
 817         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 818         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 819         findcmd.o \
 820         std-regs.o \
 821         signals.o \
 822         exec.o reverse.o \
 823         bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 824         dbxread.o coffread.o coff-pe-read.o \
 825         dwarf2read.o mipsread.o stabsread.o corefile.o \
 826         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 827         ada-lang.o c-lang.o f-lang.o objc-lang.o \
 828         ada-tasks.o \
 829         ui-out.o cli-out.o \
 830         varobj.o vec.o wrapper.o \
 831         jv-lang.o jv-valprint.o jv-typeprint.o \
 832         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 833         scm-exp.o scm-lang.o scm-valprint.o \
 834         sentinel-frame.o \
 835         complaints.o typeprint.o \
 836         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 837         ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
 838         serial.o mdebugread.o top.o utils.o \
 839         ui-file.o \
 840         user-regs.o \
 841         frame.o frame-unwind.o doublest.o \
 842         frame-base.o \
 843         inline-frame.o \
 844         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 845         cp-namespace.o \
 846         reggroups.o regset.o \
 847         trad-frame.o \
 848         tramp-frame.o \
 849         solib.o solib-null.o \
 850         prologue-value.o memory-map.o xml-support.o xml-syscall.o \
 851         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 852         inferior.o osdata.o gdb_usleep.o record.o gcore.o \
 853         jit.o progspace.o
 854
 855 # Definitions for the syscall's XML files and dir
 856 XML_SYSCALLS_DIR = syscalls/
 857 XML_SYSCALLS_FILES = gdb-syscalls.dtd \
 858                      ppc-linux.xml ppc64-linux.xml \
 859                      i386-linux.xml amd64-linux.xml \
 860                      sparc-linux.xml sparc64-linux.xml
 861
 862 TSOBS = inflow.o
 863
 864 SUBDIRS = @subdirs@
 865 CLEANDIRS = $(SUBDIRS) gnulib
 866
 867 # For now, shortcut the "configure GDB for fewer languages" stuff.
 868 YYFILES = c-exp.c \
 869         cp-name-parser.c \
 870         objc-exp.c \
 871         ada-lex.c \
 872         ada-exp.c \
 873         jv-exp.c \
 874         f-exp.c m2-exp.c p-exp.c
 875 YYOBJ = c-exp.o \
 876         cp-name-parser.o \
 877         objc-exp.o \
 878         ada-exp.o \
 879         jv-exp.o \
 880         f-exp.o m2-exp.o p-exp.o
 881
 882 # Things which need to be built when making a distribution.
 883
 884 DISTSTUFF = $(YYFILES)
 885
 886
 887 # All generated files which can be included by another file.
 888 generated_files = config.h observer.h observer.inc ada-lex.c \
 889         $(GNULIB_H) $(NAT_GENERATED_FILES)
 890
 891 .c.o:
 892         $(COMPILE) $<
 893         $(POSTCOMPILE)
 894
 895 all: gdb$(EXEEXT) $(CONFIG_ALL) xml-syscall-copy
 896         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 897 .PHONY: all-tui
 898 all-tui: $(TUI)$(EXEEXT)
 899
 900 # This is needed for running GDB from the build directory
 901 .PHONY: xml-syscall-copy
 902 xml-syscall-copy:
 903         if [ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
 904           mkdir -p ./$(XML_SYSCALLS_DIR) ; \
 905           list='$(XML_SYSCALLS_FILES)' ; \
 906           for file in $$list ; do \
 907             f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 908             if test -f $$f ; then \
 909               $(INSTALL_DATA) $$f \
 910                   ./$(XML_SYSCALLS_DIR) ; \
 911             fi ; \
 912           done ; \
 913         fi ;
 914
 915 # This target is responsible for properly installing the syscalls'
 916 # XML files in the system.
 917 .PHONY: xml-syscall-install
 918 xml-syscall-install:
 919         $(SHELL) $(srcdir)/../mkinstalldirs \
 920                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 921         list='$(XML_SYSCALLS_FILES)' ; \
 922         for file in $$list ; do \
 923           f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 924           if test -f $$f ; then \
 925             $(INSTALL_DATA) $$f \
 926                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 927           fi ; \
 928         done ;
 929
 930 installcheck:
 931
 932 # The check target can not use subdir_do, because subdir_do does not
 933 # use TARGET_FLAGS_TO_PASS.
 934 check: force
 935         @if [ -f testsuite/Makefile ]; then \
 936           rootme=`pwd`; export rootme; \
 937           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 938           cd testsuite; \
 939           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 940         else true; fi
 941
 942 # The idea is to parallelize testing of multilibs, for example:
 943 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 944 # will run 3 concurrent sessions of check, eventually testing all 10
 945 # combinations.  GNU make is required for the % pattern to work, as is
 946 # a shell that expands alternations within braces.  If GNU make is not
 947 # used, this rule will harmlessly fail to match.  Used FORCE_PARALLEL to
 948 # prevent serialized checking due to the passed RUNTESTFLAGS.
 949 # FIXME: use config.status --config not --version, when available.
 950 check//%: force
 951         @if [ -f testsuite/config.status ]; then \
 952           rootme=`pwd`; export rootme; \
 953           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 954           target=`echo "$@" | sed 's,//.*,,'`; \
 955           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 956           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 957           testdir=testsuite.$$vardots; \
 958           if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
 959             configargs=`cd testsuite && ./config.status --version | \
 960               sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
 961             $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
 962             (cd $$testdir && \
 963              eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
 964                            "\"--srcdir=\$$rootsrc/testsuite\"" \
 965              ); \
 966           else :; fi && cd $$testdir && \
 967           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 968             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 969             FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
 970             "$$target"; \
 971         else true; fi
 972
 973 info install-info clean-info dvi pdf install-pdf html install-html: force
 974         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 975
 976 gdb.z:gdb.1
 977         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 978         pack gdb.t ; rm -f gdb.t
 979         mv gdb.t.z gdb.z
 980
 981 # Traditionally "install" depends on "all".  But it may be useful
 982 # not to; for example, if the user has made some trivial change to a
 983 # source file and doesn't care about rebuilding or just wants to save the
 984 # time it takes for make to check that all is up to date.
 985 # install-only is intended to address that need.
 986 install: all install-only
 987
 988 # The "install-only" target also installs the syscalls' XML files in
 989 # the system.
 990 install-only: $(CONFIG_INSTALL) xml-syscall-install
 991         transformed_name=`t='$(program_transform_name)'; \
 992                           echo gdb | sed -e "$$t"` ; \
 993                 if test "x$$transformed_name" = x; then \
 994                   transformed_name=gdb ; \
 995                 else \
 996                   true ; \
 997                 fi ; \
 998                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 999                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1000                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1001                 $(SHELL) $(srcdir)/../mkinstalldirs \
1002                         $(DESTDIR)$(man1dir) ; \
1003                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1004                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1005         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1006 .PHONY: install-tui
1007 install-tui:
1008         transformed_name=`t='$(program_transform_name)'; \
1009                           echo $(TUI) | sed -e "$$t"` ; \
1010                 if test "x$$transformed_name" = x; then \
1011                   transformed_name=$(TUI) ; \
1012                 else \
1013                   true ; \
1014                 fi ; \
1015                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1016                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
1017                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1018                 $(SHELL) $(srcdir)/../mkinstalldirs \
1019                         $(DESTDIR)$(man1dir) ; \
1020                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1021                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1022
1023
1024 uninstall: force $(CONFIG_UNINSTALL)
1025         transformed_name=`t='$(program_transform_name)'; \
1026                           echo gdb | sed -e $$t` ; \
1027                 if test "x$$transformed_name" = x; then \
1028                   transformed_name=gdb ; \
1029                 else \
1030                   true ; \
1031                 fi ; \
1032                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1033                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1034         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1035 .PHONY: uninstall-tui
1036 uninstall-tui:
1037         transformed_name=`t='$(program_transform_name)'; \
1038                           echo $(TUI) | sed -e $$t` ; \
1039                 if test "x$$transformed_name" = x; then \
1040                   transformed_name=$(TUI) ; \
1041                 else \
1042                   true ; \
1043                 fi ; \
1044                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1045                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1046
1047 # The C++ name parser can be built standalone for testing.
1048 test-cp-name-parser.o: cp-name-parser.c
1049         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1050         $(POSTCOMPILE)
1051
1052 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1053         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
1054                 test-cp-name-parser.o $(LIBIBERTY)
1055
1056 # We do this by grepping through sources.  If that turns out to be too slow,
1057 # maybe we could just require every .o file to have an initialization routine
1058 # of a given name (top.o -> _initialize_top, etc.).
1059 #
1060 # Formatting conventions:  The name of the _initialize_* routines must start
1061 # in column zero, and must not be inside #if.
1062 #
1063 # Note that the set of files with init functions might change, or the names
1064 # of the functions might change, so this files needs to depend on all the
1065 # object files that will be linked into gdb.
1066
1067 # FIXME: There is a problem with this approach - init.c may force
1068 # unnecessary files to be linked in.
1069
1070 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1071 # the first call is to _initialize_gdbtypes (implemented by explicitly
1072 # putting that function's name first in the init.l-tmp file).  This is
1073 # a hack to ensure that all the architecture dependant global
1074 # builtin_type_* variables are initialized before anything else
1075 # (per-architecture code is called in the same order that it is
1076 # registered).  The ``correct fix'' is to have all the builtin types
1077 # made part of the architecture and initialize them on-demand (using
1078 # gdbarch_data) just like everything else.  The catch is that other
1079 # modules still take the address of these builtin types forcing them
1080 # to be variables, sigh!
1081
1082 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1083 # anchored on the first column and excludes the ``/'' character so
1084 # that it doesn't add the $(srcdir) prefix to any file that already
1085 # has an absolute path.  It turns out that $(DEC)'s True64 make
1086 # automatically adds the $(srcdir) prefixes when it encounters files
1087 # in sub-directories such as cli/ and mi/.
1088
1089 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1090 # duplicates.  Files in the gdb/ directory can end up appearing in
1091 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1092
1093 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1094 init.c: $(INIT_FILES)
1095         @echo Making init.c
1096         @rm -f init.c-tmp init.l-tmp
1097         @touch init.c-tmp
1098         @echo gdbtypes > init.l-tmp
1099         @-LANG=C ; export LANG ; \
1100         LC_ALL=C ; export LC_ALL ; \
1101         echo $(INIT_FILES) | \
1102         tr ' ' '\012' | \
1103         sed \
1104             -e '/^gdbtypes.[co]$$/d' \
1105             -e '/^init.[co]$$/d' \
1106             -e '/xdr_ld.[co]$$/d' \
1107             -e '/xdr_ptrace.[co]$$/d' \
1108             -e '/xdr_rdb.[co]$$/d' \
1109             -e '/udr.[co]$$/d' \
1110             -e '/udip2soc.[co]$$/d' \
1111             -e '/udi2go32.[co]$$/d' \
1112             -e '/version.[co]$$/d' \
1113             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1114             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1115             -e 's/\.[co]$$/.c/' \
1116             -e 's,signals\.c,common/signals\.c,' \
1117             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1118         while read f; do \
1119             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1120         done | \
1121         while read f; do \
1122             case " $$fs " in \
1123                 *" $$f "* ) ;; \
1124                 * ) echo $$f ; fs="$$fs $$f";; \
1125             esac; \
1126         done >> init.l-tmp
1127         @echo '/* Do not modify this file.  */' >>init.c-tmp
1128         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1129         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1130         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1131         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1132         @echo 'void' >>init.c-tmp
1133         @echo 'initialize_all_files (void)' >>init.c-tmp
1134         @echo '{' >>init.c-tmp
1135         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1136         @echo '}' >>init.c-tmp
1137         @rm init.l-tmp
1138         @mv init.c-tmp init.c
1139
1140 .PRECIOUS: init.c
1141
1142 # Removing the old gdb first works better if it is running, at least on SunOS.
1143 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1144         rm -f gdb$(EXEEXT)
1145         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1146                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1147                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1148
1149 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1150         rm -f $(TUI)$(EXEEXT)
1151         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1152                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1153                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1154
1155 # Convenience rule to handle recursion.
1156 $(LIBGNU) $(GNULIB_H): all-lib
1157 all-lib: gnulib/Makefile
1158         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1159 .PHONY: all-lib
1160
1161 # Create a library of the gdb object files and build GDB by linking
1162 # against that.
1163 #
1164 # init.o is very important.  It pulls in the rest of GDB.
1165 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1166 libgdb.a: $(LIBGDB_OBS)
1167         -rm -f libgdb.a
1168         $(AR) q libgdb.a $(LIBGDB_OBS)
1169         $(RANLIB) libgdb.a
1170
1171 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1172 # on itself without copying the executable.  So "make gdb1" will make
1173 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1174 # Removing gdb1 before the copy is the right thing if gdb1 is open
1175 # in another process.
1176 gdb1$(EXEEXT): gdb$(EXEEXT)
1177         rm -f gdb1$(EXEEXT)
1178         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1179
1180 # Put the proper machine-specific files first, so M-. on a machine
1181 # specific routine gets the one for the correct machine.  (FIXME: those
1182 # files go in twice; we should be removing them from the main list).
1183
1184 # TAGS depends on all the files that go into it so you can rebuild TAGS
1185 # with `make TAGS' and not have to say `rm TAGS' first.
1186
1187 GDB_NM_FILE = @GDB_NM_FILE@
1188 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1189         @echo Making TAGS
1190         @etags $(srcdir)/$(GDB_NM_FILE) \
1191         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1192                 echo $(srcdir)/$$i ; \
1193         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1194                 echo $$i ; \
1195         done) | sed -e 's/\.o$$/\.c/'` \
1196         `find $(srcdir)/config -name '*.h' -print`
1197
1198 tags: TAGS
1199
1200 clean mostlyclean: $(CONFIG_CLEAN)
1201         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1202         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1203         rm -f init.c version.c
1204         rm -f gdb$(EXEEXT) core make.log
1205         rm -f gdb[0-9]$(EXEEXT)
1206         rm -f test-cp-name-parser$(EXEEXT)
1207         rm -f xml-builtin.c stamp-xml
1208         rm -f $(DEPDIR)/*
1209
1210 .PHONY: clean-tui
1211 clean-tui:
1212         rm -f $(TUI)$(EXEEXT)
1213
1214 # This used to depend on c-exp.c m2-exp.c TAGS
1215 # I believe this is wrong; the makefile standards for distclean just
1216 # describe removing files; the only sort of "re-create a distribution"
1217 # functionality described is if the distributed files are unmodified.
1218 # NB: While GDBSERVER might be configured on native systems, it isn't
1219 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1220 distclean: clean
1221         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1222         rm -f gdbserver/config.status gdbserver/config.log
1223         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1224         rm -f gdbserver/Makefile gdbserver/config.cache
1225         rm -f nm.h config.status config.h stamp-h .gdbinit
1226         rm -f y.output yacc.acts yacc.tmp y.tab.h
1227         rm -f config.log config.cache
1228         rm -f Makefile
1229         rm -rf $(DEPDIR)
1230
1231 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1232 realclean: maintainer-clean
1233
1234 local-maintainer-clean:
1235         @echo "This command is intended for maintainers to use;"
1236         @echo "it deletes files that may require special tools to rebuild."
1237         rm -f c-exp.c \
1238                 cp-name-parser.c \
1239                 ada-lex.c ada-exp.c \
1240                 objc-exp.c \
1241                 jv-exp.tab \
1242                 f-exp.c m2-exp.c p-exp.c
1243         rm -f TAGS $(INFOFILES)
1244         rm -f $(YYFILES)
1245         rm -f nm.h config.status
1246
1247 do-maintainer-clean:
1248         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1249                 subdir_do
1250
1251 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1252         cd doc; $(MAKE) $(MFLAGS) diststuff
1253
1254 subdir_do: force
1255         @for i in $(DODIRS); do \
1256                 if [ -f ./$$i/Makefile ] ; then \
1257                         if (cd ./$$i; \
1258                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1259                         else exit 1 ; fi ; \
1260                 else true ; fi ; \
1261         done
1262
1263 Makefile: Makefile.in config.status @frags@
1264         # Regenerate the Makefile and the tm.h / nm.h links.
1265         CONFIG_FILES="Makefile" \
1266           CONFIG_COMMANDS= \
1267           CONFIG_HEADERS= \
1268           $(SHELL) config.status
1269
1270 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1271         CONFIG_FILES="gnulib/Makefile" \
1272           CONFIG_COMMANDS="depfiles" \
1273           CONFIG_HEADERS= \
1274           CONFIG_LINKS= \
1275           $(SHELL) config.status
1276
1277 config.h: stamp-h ; @true
1278 stamp-h: $(srcdir)/config.in config.status
1279         CONFIG_HEADERS=config.h:config.in \
1280           CONFIG_COMMANDS="default depdir" \
1281           CONFIG_FILES= \
1282           CONFIG_LINKS= \
1283           $(SHELL) config.status
1284
1285 config.status: $(srcdir)/configure configure.tgt configure.host
1286         $(SHELL) config.status --recheck
1287
1288 ACLOCAL = aclocal
1289 ACLOCAL_AMFLAGS = -I gnulib/m4
1290 aclocal_m4_deps = \
1291         configure.ac \
1292         gnulib/m4/extensions.m4 \
1293         gnulib/m4/gnulib-common.m4 \
1294         gnulib/m4/gnulib-comp.m4 \
1295         gnulib/m4/include_next.m4 \
1296         gnulib/m4/longlong.m4 \
1297         gnulib/m4/memchr.m4 \
1298         gnulib/m4/memcmp.m4 \
1299         gnulib/m4/memmem.m4 \
1300         gnulib/m4/onceonly_2_57.m4 \
1301         gnulib/m4/stdint.m4 \
1302         gnulib/m4/string_h.m4 \
1303         gnulib/m4/wchar.m4 \
1304         ../config/extensions.m4 \
1305         ../config/lead-dot.m4 \
1306         ../config/proginstall.m4 \
1307         ../bfd/bfd.m4 \
1308         ../config/acinclude.m4 \
1309         ../config/override.m4 \
1310         ../config/gettext-sister.m4 \
1311         ../config/lib-ld.m4 \
1312         ../config/lib-prefix.m4 \
1313         ../config/lib-link.m4 \
1314         ../config/acx.m4 \
1315         ../config/tcl.m4 \
1316         ../config/depstand.m4 \
1317         ../config/lcmessage.m4 \
1318         ../config/codeset.m4
1319
1320 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
1321         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
1322
1323 AUTOCONF = autoconf
1324 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
1325 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1326         cd $(srcdir) && $(AUTOCONF)
1327
1328 AUTOHEADER = autoheader
1329 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1330         cd $(srcdir) && $(AUTOHEADER)
1331         rm -f stamp-h
1332         touch $@
1333
1334 # automatic rebuilding in automake-generated Makefiles requires
1335 # this rule in the toplevel Makefile, which, with GNU make, causes
1336 # the desired updates through the implicit regeneration of the Makefile
1337 # and all of its prerequisites.
1338 am--refresh:
1339         @:
1340
1341 force:
1342
1343 # Documentation!
1344 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1345 doc/refcard.dvi:
1346         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1347
1348 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1349 doc/refcard.ps:
1350         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1351
1352 # GDB MANUAL: TeX dvi file
1353 doc/gdb.dvi:
1354         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1355
1356 # GDB MANUAL: info file
1357 doc/gdb.info:
1358         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1359
1360 # Make copying.c from COPYING
1361 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1362         awk -f $(srcdir)/copying.awk \
1363                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1364         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1365
1366 version.c: Makefile version.in
1367         rm -f version.c-tmp version.c
1368         echo '#include "version.h"' >> version.c-tmp
1369         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1370         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1371         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1372         mv version.c-tmp version.c
1373
1374 observer.h: observer.sh doc/observer.texi
1375         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1376
1377 observer.inc: observer.sh doc/observer.texi
1378         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1379
1380 lint: $(LINTFILES)
1381         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1382            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1383
1384 gdb.cxref: $(SFILES)
1385         cxref -I. $(SFILES) >gdb.cxref
1386
1387 force_update:
1388
1389 # GNU Make has an annoying habit of putting *all* the Makefile variables
1390 # into the environment, unless you include this target as a circumvention.
1391 # Rumor is that this will be fixed (and this target can be removed)
1392 # in GNU Make 4.0.
1393 .NOEXPORT:
1394
1395 # GNU Make 3.63 has a different problem: it keeps tacking command line
1396 # overrides onto the definition of $(MAKE).  This variable setting
1397 # will remove them.
1398 MAKEOVERRIDES=
1399
1400 ALLDEPFILES = \
1401         aix-thread.c \
1402         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1403         alpha-tdep.c alpha-mdebug-tdep.c \
1404         alpha-linux-tdep.c alpha-osf1-tdep.c \
1405         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1406         amd64-nat.c amd64-tdep.c \
1407         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1408         amd64nbsd-nat.c amd64nbsd-tdep.c \
1409         amd64obsd-nat.c amd64obsd-tdep.c \
1410         amd64-darwin-tdep.c \
1411         amd64-dicos-tdep.c \
1412         amd64-linux-nat.c amd64-linux-tdep.c \
1413         amd64-sol2-tdep.c \
1414         arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1415         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1416         avr-tdep.c \
1417         bsd-uthread.c bsd-kvm.c \
1418         core-regset.c corelow.c \
1419         dcache.c dicos-tdep.c darwin-nat.c \
1420         exec.c \
1421         fbsd-nat.c \
1422         fork-child.c \
1423         glibc-tdep.c \
1424         go32-nat.c h8300-tdep.c \
1425         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1426         hppa-linux-tdep.c hppa-linux-nat.c \
1427         hppabsd-nat.c hppabsd-tdep.c \
1428         hppaobsd-tdep.c \
1429         hppanbsd-nat.c hppanbsd-tdep.c \
1430         i386-tdep.c i386-linux-nat.c \
1431         i386v4-nat.c i386-cygwin-tdep.c \
1432         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1433         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1434         i387-tdep.c \
1435         i386-darwin-tdep.c i386-darwin-nat.c \
1436         i386-dicos-tdep.c \
1437         i386-linux-tdep.c i386-nat.c \
1438         i386-sol2-nat.c i386-sol2-tdep.c \
1439         i386gnu-nat.c i386gnu-tdep.c \
1440         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1441         inf-ptrace.c inf-ttrace.c \
1442         irix5-nat.c \
1443         libunwind-frame.c \
1444         linux-fork.c \
1445         linux-tdep.c \
1446         linux-record.c \
1447         lm32-tdep.c \
1448         m68hc11-tdep.c \
1449         m32r-tdep.c \
1450         m32r-linux-nat.c m32r-linux-tdep.c \
1451         m68k-tdep.c \
1452         m68kbsd-nat.c m68kbsd-tdep.c \
1453         m68klinux-nat.c m68klinux-tdep.c \
1454         m88k-tdep.c m88kbsd-nat.c \
1455         microblaze-tdep.c microblaze-linux-tdep.c \
1456         mingw-hdep.c \
1457         mips-linux-nat.c mips-linux-tdep.c \
1458         mips-irix-tdep.c \
1459         mips-tdep.c \
1460         mipsnbsd-nat.c mipsnbsd-tdep.c \
1461         mips64obsd-nat.c mips64obsd-tdep.c \
1462         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1463         solib-osf.c \
1464         solib-target.c \
1465         somread.c solib-som.c \
1466         posix-hdep.c \
1467         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1468         ppcnbsd-nat.c ppcnbsd-tdep.c \
1469         ppcobsd-nat.c ppcobsd-tdep.c \
1470         procfs.c \
1471         remote-m32r-sdi.c remote-mips.c \
1472         remote-sim.c \
1473         dcache.c \
1474         rs6000-nat.c rs6000-tdep.c \
1475         s390-tdep.c s390-nat.c \
1476         score-tdep.c \
1477         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1478         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1479         sol2-tdep.c \
1480         solib-irix.c solib-svr4.c solib-sunos.c \
1481         sparc-linux-nat.c sparc-linux-tdep.c \
1482         sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1483         sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1484         sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1485         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1486         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1487         spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1488         v850-tdep.c \
1489         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1490         windows-nat.c windows-tdep.c \
1491         xcoffread.c xcoffsolib.c \
1492         xstormy16-tdep.c \
1493         xtensa-tdep.c xtensa-config.c \
1494         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1495
1496 # Some files need explicit build rules (due to -Werror problems) or due
1497 # to sub-directory fun 'n' games.
1498
1499 hpux-thread.o: $(srcdir)/hpux-thread.c
1500         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1501                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1502         $(POSTCOMPILE)
1503
1504 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1505 main.o: $(srcdir)/main.c
1506         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1507         $(POSTCOMPILE)
1508
1509 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1510 # errors.  It turns out that that is the least of monitor.c's
1511 # problems.  The function print_vsprintf appears to be using
1512 # va_arg(long) to extract CORE_ADDR parameters - something that
1513 # definitly will not work.  "monitor.c" needs to be rewritten so that
1514 # it doesn't use format strings and instead uses callbacks.
1515 monitor.o: $(srcdir)/monitor.c
1516         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1517         $(POSTCOMPILE)
1518
1519 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1520 # checks format strings.
1521 printcmd.o: $(srcdir)/printcmd.c
1522         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1523                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1524         $(POSTCOMPILE)
1525
1526 # Message files.  Based on code in gcc/Makefile.in.
1527
1528 # Rules for generating translated message descriptions.  Disabled by
1529 # autoconf if the tools are not available.
1530
1531 .SUFFIXES: .po .gmo .pox .pot
1532 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1533
1534 all-po: $(CATALOGS)
1535
1536 # This notation should be acceptable to all Make implementations used
1537 # by people who are interested in updating .po files.
1538 update-po: $(CATALOGS:.gmo=.pox)
1539
1540 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1541 # script does that.
1542 .po.gmo:
1543         -test -d po || mkdir po
1544         $(GMSGFMT) --statistics -o $@ $<
1545
1546 # The new .po has to be gone over by hand, so we deposit it into
1547 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1548 # exists, use it (it was just created), else use the one in srcdir.
1549 .po.pox:
1550         -test -d po || mkdir po
1551         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1552                         then echo po/$(PACKAGE).pot; \
1553                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1554
1555 # This rule has to look for .gmo modules in both srcdir and the cwd,
1556 # and has to check that we actually have a catalog for each language,
1557 # in case they weren't built or included with the distribution.
1558 install-po:
1559         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1560         cats="$(CATALOGS)"; for cat in $$cats; do \
1561           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1562           if [ -f $$cat ]; then :; \
1563           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1564           else continue; \
1565           fi; \
1566           dir=$(localedir)/$$lang/LC_MESSAGES; \
1567           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1568           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1569           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1570           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1571         done
1572 uninstall-po:
1573         cats="$(CATALOGS)"; for cat in $$cats; do \
1574           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1575           if [ -f $$cat ]; then :; \
1576           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1577           else continue; \
1578           fi; \
1579           dir=$(localedir)/$$lang/LC_MESSAGES; \
1580           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1581         done
1582 # Delete po/*.gmo only if we are not building in the source directory.
1583 clean-po:
1584         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1585
1586 # Rule for regenerating the message template (gdb.pot).  Instead of
1587 # forcing everyone to edit POTFILES.in, which proved impractical, this
1588 # rule has no dependencies and always regenerates gdb.pot.  This is
1589 # relatively harmless since the .po files do not directly depend on
1590 # it.  The .pot file is left in the build directory.  Since GDB's
1591 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1592 # files) force this rule.
1593 $(PACKAGE).pot: po/$(PACKAGE).pot
1594 po/$(PACKAGE).pot: force
1595         -test -d po || mkdir po
1596         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1597
1598
1599 #
1600 # YACC/LEX dependencies
1601 #
1602 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1603 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1604 # said LANG-exp.c rather than ./c-exp.c some makes would
1605 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1606 # decls for malloc/realloc/free which conflict with everything else.
1607 # Strictly speaking c-exp.c should therefore depend on
1608 # Makefile.in, but that was a pretty big annoyance.
1609
1610 .SUFFIXES: .y .l
1611 .y.c:
1612         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1613         -sed -e '/extern.*malloc/d' \
1614              -e '/extern.*realloc/d' \
1615              -e '/extern.*free/d' \
1616              -e '/include.*malloc.h/d' \
1617              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1618              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1619              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1620              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1621              -e '/^#line.*y.tab.c/d' \
1622           < $@.tmp > $@.new
1623         -rm $@.tmp
1624         mv $@.new ./$*.c
1625 .l.c:
1626         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1627             $(FLEX) -o$@ $< && \
1628             rm -f $@.new && \
1629             sed -e '/extern.*malloc/d' \
1630                 -e '/extern.*realloc/d' \
1631                 -e '/extern.*free/d' \
1632                 -e '/include.*malloc.h/d' \
1633                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1634                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1635                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1636                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1637                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1638               < $@ > $@.new && \
1639             rm -f $@ && \
1640             mv $@.new $@; \
1641         elif [ -f $@ ]; then \
1642             echo "Warning: $*.c older than $*.l and flex not available."; \
1643         else \
1644             echo "$@ missing and flex not available."; \
1645             false; \
1646         fi
1647
1648 .PRECIOUS: ada-exp.c ada-lex.c
1649 .PRECIOUS: c-exp.c
1650 .PRECIOUS: f-exp.c
1651 .PRECIOUS: jv-exp.c
1652 .PRECIOUS: m2-exp.c
1653 .PRECIOUS: objc-exp.c
1654 .PRECIOUS: p-exp.c
1655
1656 # XML rules
1657
1658 xml-builtin.c: stamp-xml; @true
1659 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1660         rm -f xml-builtin.tmp
1661         AWK="$(AWK)" \
1662           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1663           xml-builtin.tmp $(XMLFILES)
1664         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1665         echo stamp > stamp-xml
1666
1667 .PRECIOUS: xml-builtin.c
1668
1669 #
1670 # gdb/cli/ dependencies
1671 #
1672 # Need to explicitly specify the compile rule as make will do nothing
1673 # or try to compile the object file into the sub-directory.
1674
1675 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1676         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1677         $(POSTCOMPILE)
1678
1679 cli-decode.o: $(srcdir)/cli/cli-decode.c
1680         $(COMPILE) $(srcdir)/cli/cli-decode.c
1681         $(POSTCOMPILE)
1682
1683 cli-dump.o: $(srcdir)/cli/cli-dump.c
1684         $(COMPILE) $(srcdir)/cli/cli-dump.c
1685         $(POSTCOMPILE)
1686
1687 cli-interp.o: $(srcdir)/cli/cli-interp.c
1688         $(COMPILE) $(srcdir)/cli/cli-interp.c
1689         $(POSTCOMPILE)
1690
1691 cli-logging.o: $(srcdir)/cli/cli-logging.c
1692         $(COMPILE) $(srcdir)/cli/cli-logging.c
1693         $(POSTCOMPILE)
1694
1695 cli-script.o: $(srcdir)/cli/cli-script.c
1696         $(COMPILE) $(srcdir)/cli/cli-script.c
1697         $(POSTCOMPILE)
1698
1699 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1700         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1701         $(POSTCOMPILE)
1702
1703
1704 #
1705 # GDBTK sub-directory
1706 #
1707 # Need to explicitly specify the compile rule as make will do nothing
1708 # or try to compile the object file into the mi directory.
1709
1710 all-gdbtk: insight$(EXEEXT)
1711
1712 install-gdbtk:
1713         transformed_name=`t='$(program_transform_name)'; \
1714                   echo insight | sed -e $$t` ; \
1715         if test "x$$transformed_name" = x; then \
1716           transformed_name=insight ; \
1717         else \
1718           true ; \
1719         fi ; \
1720         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1721         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1722                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1723         $(SHELL) $(srcdir)/../mkinstalldirs \
1724                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1725         $(SHELL) $(srcdir)/../mkinstalldirs \
1726                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1727         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1728                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1729         $(SHELL) $(srcdir)/../mkinstalldirs \
1730                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1731                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1732         $(SHELL) $(srcdir)/../mkinstalldirs \
1733                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1734                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1735                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1736         cd $(srcdir)/gdbtk/library ; \
1737         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1738           do \
1739                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1740           done ;
1741
1742 uninstall-gdbtk:
1743         transformed_name=`t='$(program_transform_name)'; \
1744                   echo insight | sed -e $$t` ; \
1745         if test "x$$transformed_name" = x; then \
1746                 transformed_name=insight ; \
1747         else \
1748                 true ; \
1749         fi ; \
1750         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1751         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1752
1753 clean-gdbtk:
1754         rm -f insight$(EXEEXT)
1755
1756 # Removing the old gdb first works better if it is running, at least on SunOS.
1757 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1758                 $(CDEPS) $(TDEPLIBS)
1759         rm -f insight$(EXEEXT)
1760         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1761                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1762                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1763
1764 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1765         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1766
1767 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1768                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1769                 $(GDBTK_CFLAGS) \
1770                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1771                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1772
1773 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1774         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1775         $(POSTCOMPILE)
1776
1777 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1778         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1779         $(POSTCOMPILE)
1780
1781 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1782         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1783         $(POSTCOMPILE)
1784
1785 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1786         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1787         $(POSTCOMPILE)
1788
1789 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1790         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1791         $(POSTCOMPILE)
1792
1793 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1794         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1795         $(POSTCOMPILE)
1796
1797 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1798         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1799         $(POSTCOMPILE)
1800
1801 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1802         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1803         $(POSTCOMPILE)
1804
1805 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1806         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1807         $(POSTCOMPILE)
1808
1809 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1810         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1811         $(POSTCOMPILE)
1812
1813
1814 #
1815 # gdb/mi/ dependencies
1816 #
1817 # Need to explicitly specify the compile rule as make will do nothing
1818 # or try to compile the object file into the sub-directory.
1819
1820 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1821         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1822         $(POSTCOMPILE)
1823
1824 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1825         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1826         $(POSTCOMPILE)
1827
1828 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1829         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1830         $(POSTCOMPILE)
1831
1832 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1833         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1834         $(POSTCOMPILE)
1835
1836 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1837         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1838         $(POSTCOMPILE)
1839
1840 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1841         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1842         $(POSTCOMPILE)
1843
1844 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1845         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1846         $(POSTCOMPILE)
1847
1848 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1849         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1850         $(POSTCOMPILE)
1851
1852 mi-console.o: $(srcdir)/mi/mi-console.c
1853         $(COMPILE) $(srcdir)/mi/mi-console.c
1854         $(POSTCOMPILE)
1855
1856 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1857         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1858         $(POSTCOMPILE)
1859
1860 mi-interp.o: $(srcdir)/mi/mi-interp.c
1861         $(COMPILE) $(srcdir)/mi/mi-interp.c
1862         $(POSTCOMPILE)
1863
1864 mi-main.o: $(srcdir)/mi/mi-main.c
1865         $(COMPILE) $(srcdir)/mi/mi-main.c
1866         $(POSTCOMPILE)
1867
1868 mi-out.o: $(srcdir)/mi/mi-out.c
1869         $(COMPILE) $(srcdir)/mi/mi-out.c
1870         $(POSTCOMPILE)
1871
1872 mi-parse.o: $(srcdir)/mi/mi-parse.c
1873         $(COMPILE) $(srcdir)/mi/mi-parse.c
1874         $(POSTCOMPILE)
1875
1876 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1877         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1878         $(POSTCOMPILE)
1879
1880 mi-common.o: $(srcdir)/mi/mi-common.c
1881         $(COMPILE) $(srcdir)/mi/mi-common.c
1882         $(POSTCOMPILE)
1883
1884 #
1885 # gdb/common/ dependencies
1886 #
1887 # Need to explicitly specify the compile rule as make will do nothing
1888 # or try to compile the object file into the sub-directory.
1889
1890 signals.o: $(srcdir)/common/signals.c
1891         $(COMPILE) $(srcdir)/common/signals.c
1892         $(POSTCOMPILE)
1893
1894 #
1895 # gdb/tui/ dependencies
1896 #
1897 # Need to explicitly specify the compile rule as make will do nothing
1898 # or try to compile the object file into the sub-directory.
1899
1900 tui.o: $(srcdir)/tui/tui.c
1901         $(COMPILE) $(srcdir)/tui/tui.c
1902         $(POSTCOMPILE)
1903
1904 tui-command.o: $(srcdir)/tui/tui-command.c
1905         $(COMPILE) $(srcdir)/tui/tui-command.c
1906         $(POSTCOMPILE)
1907
1908 tui-data.o: $(srcdir)/tui/tui-data.c
1909         $(COMPILE) $(srcdir)/tui/tui-data.c
1910         $(POSTCOMPILE)
1911
1912 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1913         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1914         $(POSTCOMPILE)
1915
1916 tui-file.o: $(srcdir)/tui/tui-file.c
1917         $(COMPILE) $(srcdir)/tui/tui-file.c
1918         $(POSTCOMPILE)
1919
1920 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1921         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1922         $(POSTCOMPILE)
1923
1924 tui-interp.o: $(srcdir)/tui/tui-interp.c
1925         $(COMPILE) $(srcdir)/tui/tui-interp.c
1926         $(POSTCOMPILE)
1927
1928 tui-io.o: $(srcdir)/tui/tui-io.c
1929         $(COMPILE) $(srcdir)/tui/tui-io.c
1930         $(POSTCOMPILE)
1931
1932 tui-layout.o: $(srcdir)/tui/tui-layout.c
1933         $(COMPILE) $(srcdir)/tui/tui-layout.c
1934         $(POSTCOMPILE)
1935
1936 tui-main.o: $(srcdir)/tui/tui-main.c
1937         $(COMPILE) $(srcdir)/tui/tui-main.c
1938         $(POSTCOMPILE)
1939
1940 tui-out.o: $(srcdir)/tui/tui-out.c
1941         $(COMPILE) $(srcdir)/tui/tui-out.c
1942         $(POSTCOMPILE)
1943
1944 tui-regs.o: $(srcdir)/tui/tui-regs.c
1945         $(COMPILE) $(srcdir)/tui/tui-regs.c
1946         $(POSTCOMPILE)
1947
1948 tui-source.o: $(srcdir)/tui/tui-source.c
1949         $(COMPILE) $(srcdir)/tui/tui-source.c
1950         $(POSTCOMPILE)
1951
1952 tui-stack.o: $(srcdir)/tui/tui-stack.c
1953         $(COMPILE) $(srcdir)/tui/tui-stack.c
1954         $(POSTCOMPILE)
1955
1956 tui-win.o: $(srcdir)/tui/tui-win.c
1957         $(COMPILE) $(srcdir)/tui/tui-win.c
1958         $(POSTCOMPILE)
1959
1960 tui-windata.o: $(srcdir)/tui/tui-windata.c
1961         $(COMPILE) $(srcdir)/tui/tui-windata.c
1962         $(POSTCOMPILE)
1963
1964 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1965         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1966         $(POSTCOMPILE)
1967
1968 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1969         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1970         $(POSTCOMPILE)
1971
1972 #
1973 # gdb/python/ dependencies
1974 #
1975 # Need to explicitly specify the compile rule as make will do nothing
1976 # or try to compile the object file into the sub-directory.
1977
1978 # Flags needed to compile Python code
1979 PYTHON_CFLAGS=@PYTHON_CFLAGS@
1980
1981 python.o: $(srcdir)/python/python.c
1982         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
1983         $(POSTCOMPILE)
1984
1985 py-block.o: $(srcdir)/python/py-block.c
1986         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
1987         $(POSTCOMPILE)
1988
1989 py-cmd.o: $(srcdir)/python/py-cmd.c
1990         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
1991         $(POSTCOMPILE)
1992
1993 py-frame.o: $(srcdir)/python/py-frame.c
1994         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
1995         $(POSTCOMPILE)
1996
1997 py-function.o: $(srcdir)/python/py-function.c
1998         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
1999         $(POSTCOMPILE)
2000
2001 py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
2002         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
2003         $(POSTCOMPILE)
2004
2005 py-objfile.o: $(srcdir)/python/py-objfile.c
2006         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
2007         $(POSTCOMPILE)
2008
2009 py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
2010         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
2011         $(POSTCOMPILE)
2012
2013 py-symbol.o: $(srcdir)/python/py-symbol.c
2014         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
2015         $(POSTCOMPILE)
2016
2017 py-symtab.o: $(srcdir)/python/py-symtab.c
2018         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
2019         $(POSTCOMPILE)
2020
2021 py-type.o: $(srcdir)/python/py-type.c
2022         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
2023         $(POSTCOMPILE)
2024
2025 py-utils.o: $(srcdir)/python/py-utils.c
2026         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
2027         $(POSTCOMPILE)
2028
2029 py-value.o: $(srcdir)/python/py-value.c
2030         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
2031         $(POSTCOMPILE)
2032
2033 #
2034 # Dependency tracking.  Most of this is conditional on GNU Make being
2035 # found by configure; if GNU Make is not found, we fall back to a
2036 # simpler scheme.
2037 #
2038
2039 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
2040 # Note that we put the dependencies into a .Tpo file, then move them
2041 # into place if the compile succeeds.  We need this because gcc does
2042 # not atomically write the dependency output file.
2043 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2044 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
2045 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
2046 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
2047 @GMAKE_TRUE@else
2048 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
2049 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
2050 # depcomp handles atomicity for us, so we don't need a postcompile
2051 # step.
2052 @GMAKE_TRUE@override POSTCOMPILE =
2053 @GMAKE_TRUE@endif
2054
2055 # A list of all the objects we might care about in this build, for
2056 # dependency tracking.
2057 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
2058         test-cp-name-parser.o
2059
2060 # Ensure that generated files are created early.  Use order-only
2061 # dependencies if available.  They require GNU make 3.80 or newer,
2062 # and the .VARIABLES variable was introduced at the same time.
2063 @GMAKE_TRUE@ifdef .VARIABLES
2064 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
2065 @GMAKE_TRUE@else
2066 $(all_object_files) : $(generated_files)
2067 @GMAKE_TRUE@endif
2068
2069 # Dependencies.
2070 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
2071
2072 ### end of the gdb Makefile.in.