1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
3 # Free Software Foundation, Inc.
5 # This file is part of GDB.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 3 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program. If not, see <http://www.gnu.org/licenses/>.
21 exec_prefix = @
exec_prefix@
23 host_alias
= @host_alias@
24 target_alias
= @target_alias@
25 program_transform_name
= @program_transform_name@
28 tooldir
= $(libdir)/$(target_alias
)
31 localedir
= @localedir@
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
43 datarootdir
= @datarootdir@
47 includedir = @
includedir@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_DATA
= @INSTALL_DATA@
79 # If you are compiling with GCC, make sure that either 1) You have the
80 # fixed include files where GCC can reach them, or 2) You use the
81 # -traditional flag. Otherwise the ioctl calls in inflow.c
82 # will be incorrectly compiled. The "fixincludes" script in the gcc
83 # distribution will fix your include files up.
86 # Dependency tracking information.
89 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
91 # Note that these are overridden by GNU make-specific code below if
92 # GNU make is used. The overrides implement dependency tracking.
94 COMPILE.post
= -c
-o
$@
95 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
98 # Directory containing source files.
104 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
105 # not defined, but ada-lex.c is present, compilation will continue,
106 # possibly with a warning.
109 YLWRAP
= $(srcdir)/..
/ylwrap
111 # where to find makeinfo, preferably one designed for texinfo-2
114 MAKEHTML
= $(MAKEINFO
) --html
117 # Set this up with gcc if you have gnu ld and the loader will print out
118 # line numbers for undefined references.
122 # Where is our "include" directory? Typically $(srcdir)/../include.
123 # This is essentially the header file directory for the library
124 # routines in libiberty.
125 INCLUDE_DIR
= $(srcdir)/..
/include
126 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
128 # Where is the "-liberty" library? Typically in ../libiberty.
129 LIBIBERTY
= ..
/libiberty
/libiberty.a
131 # Where is the BFD library? Typically in ../bfd.
133 BFD
= $(BFD_DIR
)/libbfd.a
134 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
135 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
137 # Where is the decnumber library? Typically in ../libdecnumber.
138 LIBDECNUMBER_DIR
= ..
/libdecnumber
139 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
140 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
141 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
143 # Where is the READLINE library? Typically in ../readline.
144 READLINE_DIR
= ..
/readline
145 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
146 READLINE
= @READLINE@
147 READLINE_DEPS
= @READLINE_DEPS@
148 READLINE_CFLAGS
= @READLINE_CFLAGS@
150 # Where is expat? This will be empty if expat was not available.
151 LIBEXPAT
= @LIBEXPAT@
153 WARN_CFLAGS
= @WARN_CFLAGS@
154 WERROR_CFLAGS
= @WERROR_CFLAGS@
155 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
156 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
158 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
160 # Where is the INTL library? Typically in ../intl.
162 INTL_DEPS
= @LIBINTL_DEP@
163 INTL_CFLAGS
= @INCINTL@
165 # Did the user give us a --with-sysroot option?
166 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
167 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
169 # Did the user give us a --with-gdb-datadir option?
170 GDB_DATADIR
= @GDB_DATADIR@
172 # Helper code from gnulib.
173 LIBGNU
= gnulib
/libgnu.a
174 INCGNU
= -I
$(srcdir)/gnulib
-Ignulib
176 # Generated headers in the gnulib directory. These must be listed
177 # so that they are generated before other files are compiled.
178 GNULIB_H
= gnulib
/string.h @GNULIB_STDINT_H@
181 # CLI sub directory definitons
185 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
190 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
198 # MI sub directory definitons
201 mi-out.o mi-console.o \
202 mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
203 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
205 mi-main.o mi-parse.o mi-getopt.o
207 mi
/mi-out.c mi
/mi-console.c \
208 mi
/mi-cmds.c mi
/mi-cmd-env.c \
209 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
210 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
211 mi
/mi-cmd-target.c mi
/mi-interp.c \
212 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
219 # TUI sub directory definitions
222 # Name of the TUI program
257 tui
/tui-wingeneral.c \
258 tui
/tui-winsource.c \
266 # python sub directory definitons
268 SUBDIR_PYTHON_OBS
= \
282 SUBDIR_PYTHON_SRCS
= \
287 python
/py-function.c \
288 python
/py-lazy-string.c \
289 python
/py-objfile.c \
290 python
/py-prettyprint.c \
297 SUBDIR_PYTHON_LDFLAGS
=
298 SUBDIR_PYTHON_CFLAGS
=
301 # Opcodes currently live in one of two places. Either they are in the
302 # opcode library, typically ../opcodes, or they are in a header file
304 # Where is the "-lopcodes" library, with (some of) the opcode tables and
306 OPCODES_DIR
= ..
/opcodes
307 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
308 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
309 # Where are the other opcode tables which only have header file
311 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
312 # Some source files like to use #include "opcodes/file.h"
313 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
315 # The simulator is usually nonexistent; targets that include one
316 # should set this to list all the .o or .a files to be linked in.
319 WIN32LIBS
= @WIN32LIBS@
321 # Tcl et al cflags and libraries
323 TCL_CFLAGS
= @TCL_INCLUDE@
324 GDBTKLIBS
= @GDBTKLIBS@
325 # Extra flags that the GDBTK files need:
326 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
329 TK_CFLAGS
= @TK_INCLUDE@
331 X11_CFLAGS
= @TK_XINCLUDES@
335 WIN32LDAPP
= @WIN32LDAPP@
338 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
339 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
341 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
343 # The version of gdbtk we're building. This should be kept
344 # in sync with GDBTK_VERSION and friends in gdbtk.h.
346 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
348 # Gdbtk requires an absolute path to the source directory or
349 # the testsuite won't run properly.
350 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
353 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
354 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
355 SUBDIR_GDBTK_SRCS
= \
356 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
357 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
358 gdbtk
/generic
/gdbtk-interp.c \
359 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
360 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
361 gdbtk
/generic
/gdbtk-main.c
362 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
363 SUBDIR_GDBTK_LDFLAGS
=
364 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
366 CONFIG_OBS
= @CONFIG_OBS@
367 CONFIG_SRCS
= @CONFIG_SRCS@
368 CONFIG_DEPS
= @CONFIG_DEPS@
369 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
370 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
371 CONFIG_ALL
= @CONFIG_ALL@
372 CONFIG_CLEAN
= @CONFIG_CLEAN@
373 CONFIG_INSTALL
= @CONFIG_INSTALL@
374 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
376 # -I. for config files.
377 # -I$(srcdir) for gdb internal headers.
378 # -I$(srcdir)/config for more generic config files.
380 # It is also possible that you will need to add -I/usr/include/sys if
381 # your system doesn't have fcntl.h in /usr/include (which is where it
382 # should be according to Posix).
384 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
385 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
387 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
388 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
390 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
392 # CFLAGS is specifically reserved for setting from the command line
393 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
396 # Set by configure, for e.g. expat.
397 INTERNAL_CPPFLAGS
= @CPPFLAGS@
399 # Need to pass this to testsuite for "make check". Probably should be
400 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
401 # so "make check" has the same result no matter where it is run.
404 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
405 INTERNAL_CFLAGS_BASE
= \
406 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
407 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
408 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
409 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
410 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
411 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
413 # LDFLAGS is specifically reserved for setting from the command line
417 # Profiling options need to go here to work.
418 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
419 # and have it work; that's why CFLAGS is here.
420 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
421 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
423 # If your system is missing alloca(), or, more likely, it's there but
424 # it doesn't work, then refer to libiberty.
426 # Libraries and corresponding dependencies for compiling gdb.
427 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
428 # LIBIBERTY appears twice on purpose.
429 # If you have the Cygnus libraries installed,
430 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
431 INSTALLED_LIBS
=-lbfd
-lreadline
-lopcodes
-liberty
-ldecnumber \
432 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
433 -lintl
-liberty
$(LIBGNU
)
434 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
435 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
437 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
438 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
439 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
441 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
442 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
447 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
448 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
454 # XML files to build in to GDB.
455 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
456 $(srcdir)/features
/library-list.dtd
$(srcdir)/features
/osdata.dtd \
457 $(srcdir)/features
/threads.dtd
459 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
460 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
461 # etc., then there will be (as part of the C library or perhaps as
462 # part of libiberty) a POSIX interface. But at least for now the
463 # host-dependent makefile fragment might need to use something else
465 SER_HARDWIRE
= @SER_HARDWIRE@
467 # The `remote' debugging target is supported for most architectures,
468 # but not all (e.g. 960)
469 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
471 # This is remote-sim.o if a simulator is to be linked in.
474 # Target-dependent object files.
475 TARGET_OBS
= @TARGET_OBS@
477 # All target-dependent objects files that require 64-bit CORE_ADDR
478 # (used with --enable-targets=all --enable-64-bit-bfd).
479 ALL_64_TARGET_OBS
= \
480 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
481 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
482 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
483 amd64-linux-tdep.o amd64nbsd-tdep.o \
484 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
485 ia64-linux-tdep.o ia64-tdep.o \
487 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
488 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
490 # All other target-dependent objects files (used with --enable-targets=all).
492 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
493 armnbsd-tdep.o armobsd-tdep.o \
494 arm-tdep.o arm-wince-tdep.o \
498 frv-linux-tdep.o frv-tdep.o \
500 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
501 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
502 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
503 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
504 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
505 i386-dicos-tdep.o i386-darwin-tdep.o \
510 m32r-linux-tdep.o m32r-tdep.o \
512 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
515 microblaze-tdep.o microblaze-linux-tdep.o \
516 mips-irix-tdep.o mips-linux-tdep.o \
517 mipsnbsd-tdep.o mips-tdep.o \
518 mn10300-linux-tdep.o mn10300-tdep.o \
522 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
523 rs6000-aix-tdep.o rs6000-tdep.o \
526 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
527 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
528 sparc-sol2-tdep.o sparc-tdep.o \
529 spu-tdep.o spu-multiarch.o solib-spu.o \
531 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
533 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
536 nbsd-tdep.o obsd-tdep.o \
538 solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
539 solib-som.o solib-pa64.o solib-darwin.o \
540 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
548 # Host-dependent makefile fragment comes in here.
550 # End of host-dependent makefile fragment
554 "exec_prefix=$(exec_prefix)" \
555 "infodir=$(infodir)" \
556 "datarootdir=$(datarootdir)" \
558 "htmldir=$(htmldir)" \
562 "datadir=$(datadir)" \
563 "includedir=$(includedir)" \
564 "against=$(against)" \
565 "DESTDIR=$(DESTDIR)" \
567 "AR_FLAGS=$(AR_FLAGS)" \
571 "CXXFLAGS=$(CXXFLAGS)" \
572 "DLLTOOL=$(DLLTOOL)" \
573 "LDFLAGS=$(LDFLAGS)" \
575 "MAKEINFO=$(MAKEINFO)" \
576 "MAKEHTML=$(MAKEHTML)" \
577 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
578 "INSTALL=$(INSTALL)" \
579 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
580 "INSTALL_DATA=$(INSTALL_DATA)" \
581 "RUNTEST=$(RUNTEST)" \
582 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
584 # Flags that we pass when building the testsuite.
586 # empty for native, $(target_alias)/ for cross
587 target_subdir
= @target_subdir@
590 if [ -f $${rootme}/../gcc/xgcc ] ; then \
591 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
592 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
594 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
597 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
600 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
606 if [ -f $${rootme}/../gcc/xgcc ] ; then \
607 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
608 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
610 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
613 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
616 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
620 # The use of $$(x_FOR_TARGET) reduces the command line length by not
621 # duplicating the lengthy definition.
622 TARGET_FLAGS_TO_PASS
= \
624 "exec_prefix=$(exec_prefix)" \
625 "against=$(against)" \
626 'CC=$$(CC_FOR_TARGET)' \
627 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
629 'CXX=$$(CXX_FOR_TARGET)' \
630 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
631 "CXXFLAGS=$(CXXFLAGS)" \
632 "INSTALL=$(INSTALL)" \
633 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
634 "INSTALL_DATA=$(INSTALL_DATA)" \
635 "MAKEINFO=$(MAKEINFO)" \
636 "MAKEHTML=$(MAKEHTML)" \
637 "RUNTEST=$(RUNTEST)" \
638 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
639 "FORCE_PARALLEL=$(FORCE_PARALLEL)"
641 # All source files that go into linking GDB.
642 # Links made at configuration time should not be specified here, since
643 # SFILES is used in building the distribution archive.
645 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
647 auxv.c ax-general.c ax-gdb.c \
650 block.c blockframe.c breakpoint.c buildsym.c \
651 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
652 charset.c cli-out.c coffread.c coff-pe-read.c \
653 complaints.c completer.c corefile.c \
654 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
656 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
657 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
658 elfread.c environ.c eval.c event-loop.c event-top.c \
659 exceptions.c expprint.c \
660 f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
661 frame.c frame-base.c frame-unwind.c \
662 gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
665 infcmd.c inflow.c infrun.c \
668 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
669 language.c linespec.c \
670 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
671 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
672 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
674 objc-exp.y objc-lang.c \
675 objfiles.c osabi.c observer.c osdata.c \
676 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
678 prologue-value.c psymtab.c \
679 regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
680 scm-exp.c scm-lang.c scm-valprint.c \
682 serial.c ser-base.c ser-unix.c \
683 solib.c solib-null.c source.c \
684 stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
686 target.c target-descriptions.c target-memory.c \
687 thread.c top.c tracepoint.c \
691 ui-out.c utils.c ui-file.h ui-file.c \
693 valarith.c valops.c valprint.c value.c varobj.c vec.c \
695 xml-tdesc.c xml-support.c \
696 inferior.c gdb_usleep.c \
701 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
703 # Header files that need to have srcdir added. Note that in the cases
704 # where we use a macro like $(gdbcmd_h), things are carefully arranged
705 # so that each .h file is listed exactly once (M-x tags-search works
706 # wrong if TAGS has files twice). Because this is tricky to get
707 # right, it is probably easiest just to list .h files here directly.
709 HFILES_NO_SRCDIR
= osf-share
/cma_debug_client.h \
710 osf-share
/HP800
/cma_thread_io.h osf-share
/cma_sequence.h \
711 osf-share
/cma_mutex.h osf-share
/cma_semaphore_defs.h \
712 osf-share
/cma_list.h osf-share
/cma_handle.h osf-share
/cma_stack.h \
713 osf-share
/cma_util.h osf-share
/RIOS
/cma_thread_io.h \
714 osf-share
/cma_errors.h osf-share
/cma_tcb_defs.h osf-share
/cma_attr.h \
715 osf-share
/cma_stack_int.h osf-share
/cma_init.h \
716 osf-share
/cma_deb_core.h osf-share
/AT386
/cma_thread_io.h \
717 osf-share
/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
718 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
719 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
720 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
721 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
722 c-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
723 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-dump.h \
724 cli
/cli-script.h macrotab.h symtab.h version.h gnulib
/wchar.in.h \
725 gnulib
/string.in.h gnulib
/str-two-way.h gnulib
/extra
/link-warning.h \
726 gnulib
/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver
/win32-low.h \
727 gdbserver
/i387-fp.h gdbserver
/server.h gdbserver
/terminal.h \
728 gdbserver
/mem-break.h gdbserver
/wincecompat.h gdbserver
/target.h \
729 gdbserver
/linux-low.h gdbserver
/gdb_proc_service.h \
730 gdbserver
/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
731 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
732 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
733 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
734 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
735 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
736 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
737 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
738 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
739 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
740 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
741 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
742 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
743 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
744 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
745 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
746 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
747 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
748 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
749 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
750 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
751 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
752 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
753 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
754 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
755 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
756 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
757 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
758 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
759 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
760 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
761 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
762 config
/i386
/nm-fbsd.h config
/i386
/nm-i386sol2.h config
/i386
/nm-linux.h \
763 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
764 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
765 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
766 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
767 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
768 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \
771 # Header files that already have srcdir in them, or which are in objdir.
773 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h
776 # GDB "info" files, which should be included in their entirety
777 INFOFILES
= gdb.
info*
779 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
781 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
782 # default their values the way we do for SER_HARDWIRE; in the future
783 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
784 # variables analogous to SER_HARDWIRE which get defaulted in this
787 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
788 $(REMOTE_OBS
) $(SIM_OBS
)
790 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
791 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
792 # and it's more useful to see it in the .y file.
793 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
795 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
797 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
803 blockframe.o breakpoint.o findvar.o regcache.o \
804 charset.o disasm.o dummy-frame.o dfp.o \
805 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
806 block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
809 expprint.o environ.o stack.o thread.o \
814 macrotab.o macrocmd.o macroexp.o macroscope.o \
816 event-loop.o event-top.o inf-loop.o completer.o \
817 gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
818 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
823 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
824 dbxread.o coffread.o coff-pe-read.o \
825 dwarf2read.o mipsread.o stabsread.o corefile.o \
826 dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
827 ada-lang.o c-lang.o f-lang.o objc-lang.o \
830 varobj.o vec.o wrapper.o \
831 jv-lang.o jv-valprint.o jv-typeprint.o \
832 m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
833 scm-exp.o scm-lang.o scm-valprint.o \
835 complaints.o typeprint.o \
836 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
837 ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
838 serial.o mdebugread.o top.o utils.o \
841 frame.o frame-unwind.o doublest.o \
844 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
846 reggroups.o regset.o \
849 solib.o solib-null.o \
850 prologue-value.o memory-map.o xml-support.o xml-syscall.o \
851 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
852 inferior.o osdata.o gdb_usleep.o record.o gcore.o \
855 # Definitions for the syscall's XML files and dir
856 XML_SYSCALLS_DIR
= syscalls
/
857 XML_SYSCALLS_FILES
= gdb-syscalls.dtd \
858 ppc-linux.xml ppc64-linux.xml \
859 i386-linux.xml amd64-linux.xml \
860 sparc-linux.xml sparc64-linux.xml
865 CLEANDIRS
= $(SUBDIRS
) gnulib
867 # For now, shortcut the "configure GDB for fewer languages" stuff.
874 f-exp.c m2-exp.c p-exp.c
880 f-exp.o m2-exp.o p-exp.o
882 # Things which need to be built when making a distribution.
884 DISTSTUFF
= $(YYFILES
)
887 # All generated files which can be included by another file.
888 generated_files
= config.h observer.h observer.inc ada-lex.c \
889 $(GNULIB_H
) $(NAT_GENERATED_FILES
)
895 all: gdb
$(EXEEXT
) $(CONFIG_ALL
) xml-syscall-copy
896 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
898 all-tui
: $(TUI
)$(EXEEXT
)
900 # This is needed for running GDB from the build directory
901 .PHONY
: xml-syscall-copy
903 if
[ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
904 mkdir
-p .
/$(XML_SYSCALLS_DIR
) ; \
905 list
='$(XML_SYSCALLS_FILES)' ; \
906 for file in
$$list ; do \
907 f
=$(srcdir)/$(XML_SYSCALLS_DIR
)/$$file ; \
908 if
test -f
$$f ; then \
909 $(INSTALL_DATA
) $$f \
910 .
/$(XML_SYSCALLS_DIR
) ; \
915 # This target is responsible for properly installing the syscalls'
916 # XML files in the system.
917 .PHONY
: xml-syscall-install
919 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
920 $(DESTDIR
)$(GDB_DATADIR
)/$(XML_SYSCALLS_DIR
) ; \
921 list
='$(XML_SYSCALLS_FILES)' ; \
922 for file in
$$list ; do \
923 f
=$(srcdir)/$(XML_SYSCALLS_DIR
)/$$file ; \
924 if
test -f
$$f ; then \
925 $(INSTALL_DATA
) $$f \
926 $(DESTDIR
)$(GDB_DATADIR
)/$(XML_SYSCALLS_DIR
) ; \
932 # The check target can not use subdir_do, because subdir_do does not
933 # use TARGET_FLAGS_TO_PASS.
935 @if
[ -f testsuite
/Makefile
]; then \
936 rootme
=`pwd`; export rootme
; \
937 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
939 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
942 # The idea is to parallelize testing of multilibs, for example:
943 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
944 # will run 3 concurrent sessions of check, eventually testing all 10
945 # combinations. GNU make is required for the % pattern to work, as is
946 # a shell that expands alternations within braces. If GNU make is not
947 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
948 # prevent serialized checking due to the passed RUNTESTFLAGS.
949 # FIXME: use config.status --config not --version, when available.
951 @if
[ -f testsuite
/config.status
]; then \
952 rootme
=`pwd`; export rootme
; \
953 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
954 target
=`echo "$@" | sed 's,//.*,,'`; \
955 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
956 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
957 testdir
=testsuite.
$$vardots; \
958 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
959 configargs
=`cd testsuite && ./config.status --version | \
960 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
961 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
963 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
964 "\"--srcdir=\$$rootsrc/testsuite\"" \
966 else :; fi
&& cd
$$testdir && \
967 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
968 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
969 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
973 info install-info clean-info
dvi pdf install-pdf html install-html
: force
974 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
977 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
978 pack gdb.t
; rm -f gdb.t
981 # Traditionally "install" depends on "all". But it may be useful
982 # not to; for example, if the user has made some trivial change to a
983 # source file and doesn't care about rebuilding or just wants to save the
984 # time it takes for make to check that all is up to date.
985 # install-only is intended to address that need.
986 install: all install-only
988 # The "install-only" target also installs the syscalls' XML files in
990 install-only
: $(CONFIG_INSTALL
) xml-syscall-install
991 transformed_name
=`t='$(program_transform_name)'; \
992 echo gdb | sed -e "$$t"` ; \
993 if
test "x$$transformed_name" = x
; then \
994 transformed_name
=gdb
; \
998 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
999 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1000 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1001 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1002 $(DESTDIR
)$(man1dir) ; \
1003 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1004 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1005 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1008 transformed_name
=`t='$(program_transform_name)'; \
1009 echo $(TUI) | sed -e "$$t"` ; \
1010 if
test "x$$transformed_name" = x
; then \
1011 transformed_name
=$(TUI
) ; \
1015 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1016 $(INSTALL_PROGRAM
) $(TUI
)$(EXEEXT
) \
1017 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1018 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1019 $(DESTDIR
)$(man1dir) ; \
1020 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1021 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1024 uninstall: force $(CONFIG_UNINSTALL
)
1025 transformed_name
=`t='$(program_transform_name)'; \
1026 echo gdb | sed -e $$t` ; \
1027 if
test "x$$transformed_name" = x
; then \
1028 transformed_name
=gdb
; \
1032 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1033 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1034 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1035 .PHONY
: uninstall-tui
1037 transformed_name
=`t='$(program_transform_name)'; \
1038 echo $(TUI) | sed -e $$t` ; \
1039 if
test "x$$transformed_name" = x
; then \
1040 transformed_name
=$(TUI
) ; \
1044 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1045 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1047 # The C++ name parser can be built standalone for testing.
1048 test-cp-name-parser.o
: cp-name-parser.c
1049 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1052 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1053 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1054 test-cp-name-parser.o
$(LIBIBERTY
)
1056 # We do this by grepping through sources. If that turns out to be too slow,
1057 # maybe we could just require every .o file to have an initialization routine
1058 # of a given name (top.o -> _initialize_top, etc.).
1060 # Formatting conventions: The name of the _initialize_* routines must start
1061 # in column zero, and must not be inside #if.
1063 # Note that the set of files with init functions might change, or the names
1064 # of the functions might change, so this files needs to depend on all the
1065 # object files that will be linked into gdb.
1067 # FIXME: There is a problem with this approach - init.c may force
1068 # unnecessary files to be linked in.
1070 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1071 # the first call is to _initialize_gdbtypes (implemented by explicitly
1072 # putting that function's name first in the init.l-tmp file). This is
1073 # a hack to ensure that all the architecture dependant global
1074 # builtin_type_* variables are initialized before anything else
1075 # (per-architecture code is called in the same order that it is
1076 # registered). The ``correct fix'' is to have all the builtin types
1077 # made part of the architecture and initialize them on-demand (using
1078 # gdbarch_data) just like everything else. The catch is that other
1079 # modules still take the address of these builtin types forcing them
1080 # to be variables, sigh!
1082 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1083 # anchored on the first column and excludes the ``/'' character so
1084 # that it doesn't add the $(srcdir) prefix to any file that already
1085 # has an absolute path. It turns out that $(DEC)'s True64 make
1086 # automatically adds the $(srcdir) prefixes when it encounters files
1087 # in sub-directories such as cli/ and mi/.
1089 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1090 # duplicates. Files in the gdb/ directory can end up appearing in
1091 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1093 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1094 init.c
: $(INIT_FILES
)
1096 @
rm -f init.c-tmp init.l-tmp
1098 @echo gdbtypes
> init.l-tmp
1099 @
-LANG
=C
; export LANG
; \
1100 LC_ALL
=C
; export LC_ALL
; \
1101 echo
$(INIT_FILES
) | \
1104 -e
'/^gdbtypes.[co]$$/d' \
1105 -e
'/^init.[co]$$/d' \
1106 -e
'/xdr_ld.[co]$$/d' \
1107 -e
'/xdr_ptrace.[co]$$/d' \
1108 -e
'/xdr_rdb.[co]$$/d' \
1109 -e
'/udr.[co]$$/d' \
1110 -e
'/udip2soc.[co]$$/d' \
1111 -e
'/udi2go32.[co]$$/d' \
1112 -e
'/version.[co]$$/d' \
1113 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1114 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1115 -e
's/\.[co]$$/.c/' \
1116 -e
's,signals\.c,common/signals\.c,' \
1117 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1119 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1124 * ) echo
$$f ; fs
="$$fs $$f";; \
1127 @echo
'/* Do not modify this file. */' >>init.c-tmp
1128 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1129 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1130 @echo
'#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
1131 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1132 @echo
'void' >>init.c-tmp
1133 @echo
'initialize_all_files (void)' >>init.c-tmp
1134 @echo
'{' >>init.c-tmp
1135 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1136 @echo
'}' >>init.c-tmp
1138 @mv init.c-tmp init.c
1142 # Removing the old gdb first works better if it is running, at least on SunOS.
1143 gdb
$(EXEEXT
): gdb.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1145 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1146 -o gdb
$(EXEEXT
) gdb.o libgdb.a \
1147 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1149 $(TUI
)$(EXEEXT
): tui-main.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1150 rm -f
$(TUI
)$(EXEEXT
)
1151 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1152 -o
$(TUI
)$(EXEEXT
) tui-main.o libgdb.a \
1153 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1155 # Convenience rule to handle recursion.
1156 $(LIBGNU
) $(GNULIB_H
): all-lib
1157 all-lib
: gnulib
/Makefile
1158 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=gnulib subdir_do
1161 # Create a library of the gdb object files and build GDB by linking
1164 # init.o is very important. It pulls in the rest of GDB.
1165 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1166 libgdb.a
: $(LIBGDB_OBS
)
1168 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1171 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1172 # on itself without copying the executable. So "make gdb1" will make
1173 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1174 # Removing gdb1 before the copy is the right thing if gdb1 is open
1175 # in another process.
1176 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1178 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1180 # Put the proper machine-specific files first, so M-. on a machine
1181 # specific routine gets the one for the correct machine. (FIXME: those
1182 # files go in twice; we should be removing them from the main list).
1184 # TAGS depends on all the files that go into it so you can rebuild TAGS
1185 # with `make TAGS' and not have to say `rm TAGS' first.
1187 GDB_NM_FILE
= @GDB_NM_FILE@
1188 TAGS
: $(DEPFILES
) $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1190 @etags
$(srcdir)/$(GDB_NM_FILE
) \
1191 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1192 echo $(srcdir)/$$i ; \
1193 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1195 done) | sed -e 's/\.o$$/\.c/'` \
1196 `find $(srcdir)/config -name '*.h' -print`
1200 clean mostlyclean: $(CONFIG_CLEAN
)
1201 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1202 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1203 rm -f init.c version.c
1204 rm -f gdb
$(EXEEXT
) core make.log
1205 rm -f gdb
[0-9]$(EXEEXT
)
1206 rm -f test-cp-name-parser
$(EXEEXT
)
1207 rm -f xml-builtin.c stamp-xml
1212 rm -f
$(TUI
)$(EXEEXT
)
1214 # This used to depend on c-exp.c m2-exp.c TAGS
1215 # I believe this is wrong; the makefile standards for distclean just
1216 # describe removing files; the only sort of "re-create a distribution"
1217 # functionality described is if the distributed files are unmodified.
1218 # NB: While GDBSERVER might be configured on native systems, it isn't
1219 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1221 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1222 rm -f gdbserver
/config.status gdbserver
/config.log
1223 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1224 rm -f gdbserver
/Makefile gdbserver
/config.cache
1225 rm -f nm.h config.status config.h stamp-h .gdbinit
1226 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1227 rm -f config.log config.cache
1231 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1232 realclean: maintainer-clean
1234 local-maintainer-clean
:
1235 @echo
"This command is intended for maintainers to use;"
1236 @echo
"it deletes files that may require special tools to rebuild."
1239 ada-lex.c ada-exp.c \
1242 f-exp.c m2-exp.c p-exp.c
1243 rm -f TAGS
$(INFOFILES
)
1245 rm -f nm.h config.status
1247 do-maintainer-clean
:
1248 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1251 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1252 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1255 @for i in
$(DODIRS
); do \
1256 if
[ -f .
/$$i/Makefile
] ; then \
1258 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1259 else exit
1 ; fi
; \
1263 Makefile
: Makefile.in config.status @frags@
1264 # Regenerate the Makefile and the tm.h / nm.h links.
1265 CONFIG_FILES
="Makefile" \
1268 $(SHELL
) config.status
1270 gnulib
/Makefile
: gnulib
/Makefile.in gnulib
/Makefile.in config.status @frags@
1271 CONFIG_FILES
="gnulib/Makefile" \
1272 CONFIG_COMMANDS
="depfiles" \
1275 $(SHELL
) config.status
1277 config.h
: stamp-h
; @true
1278 stamp-h
: $(srcdir)/config.in config.status
1279 CONFIG_HEADERS
=config.h
:config.in \
1280 CONFIG_COMMANDS
="default depdir" \
1283 $(SHELL
) config.status
1285 config.status
: $(srcdir)/configure configure.tgt configure.host
1286 $(SHELL
) config.status
--recheck
1289 ACLOCAL_AMFLAGS
= -I gnulib
/m4
1292 gnulib
/m4
/extensions.m4 \
1293 gnulib
/m4
/gnulib-common.m4 \
1294 gnulib
/m4
/gnulib-comp.m4 \
1295 gnulib
/m4
/include_next.m4 \
1296 gnulib
/m4
/longlong.m4 \
1297 gnulib
/m4
/memchr.m4 \
1298 gnulib
/m4
/memcmp.m4 \
1299 gnulib
/m4
/memmem.m4 \
1300 gnulib
/m4
/onceonly_2_57.m4 \
1301 gnulib
/m4
/stdint.m4 \
1302 gnulib
/m4
/string_h.m4 \
1303 gnulib
/m4
/wchar.m4 \
1304 ..
/config
/extensions.m4 \
1305 ..
/config
/lead-dot.m4 \
1306 ..
/config
/proginstall.m4 \
1308 ..
/config
/acinclude.m4 \
1309 ..
/config
/override.m4 \
1310 ..
/config
/gettext-sister.m4 \
1311 ..
/config
/lib-ld.m4 \
1312 ..
/config
/lib-prefix.m4 \
1313 ..
/config
/lib-link.m4 \
1316 ..
/config
/depstand.m4 \
1317 ..
/config
/lcmessage.m4 \
1318 ..
/config
/codeset.m4
1320 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1321 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1324 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1325 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1326 cd
$(srcdir) && $(AUTOCONF
)
1328 AUTOHEADER
= autoheader
1329 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1330 cd
$(srcdir) && $(AUTOHEADER
)
1334 # automatic rebuilding in automake-generated Makefiles requires
1335 # this rule in the toplevel Makefile, which, with GNU make, causes
1336 # the desired updates through the implicit regeneration of the Makefile
1337 # and all of its prerequisites.
1344 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1346 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1348 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1350 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1352 # GDB MANUAL: TeX dvi file
1354 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1356 # GDB MANUAL: info file
1358 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1360 # Make copying.c from COPYING
1361 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1362 awk
-f
$(srcdir)/copying.awk \
1363 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1364 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1366 version.c
: Makefile version.in
1367 rm -f version.c-tmp version.c
1368 echo
'#include "version.h"' >> version.c-tmp
1369 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1370 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1371 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1372 mv version.c-tmp version.c
1374 observer.h
: observer.sh doc
/observer.texi
1375 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1377 observer.inc
: observer.sh doc
/observer.texi
1378 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1381 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1382 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1384 gdb.cxref
: $(SFILES
)
1385 cxref
-I.
$(SFILES
) >gdb.cxref
1389 # GNU Make has an annoying habit of putting *all* the Makefile variables
1390 # into the environment, unless you include this target as a circumvention.
1391 # Rumor is that this will be fixed (and this target can be removed)
1395 # GNU Make 3.63 has a different problem: it keeps tacking command line
1396 # overrides onto the definition of $(MAKE). This variable setting
1402 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1403 alpha-tdep.c alpha-mdebug-tdep.c \
1404 alpha-linux-tdep.c alpha-osf1-tdep.c \
1405 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1406 amd64-nat.c amd64-tdep.c \
1407 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1408 amd64nbsd-nat.c amd64nbsd-tdep.c \
1409 amd64obsd-nat.c amd64obsd-tdep.c \
1410 amd64-darwin-tdep.c \
1411 amd64-dicos-tdep.c \
1412 amd64-linux-nat.c amd64-linux-tdep.c \
1414 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1415 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1417 bsd-uthread.c bsd-kvm.c \
1418 core-regset.c corelow.c \
1419 dcache.c dicos-tdep.c darwin-nat.c \
1424 go32-nat.c h8300-tdep.c \
1425 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1426 hppa-linux-tdep.c hppa-linux-nat.c \
1427 hppabsd-nat.c hppabsd-tdep.c \
1429 hppanbsd-nat.c hppanbsd-tdep.c \
1430 i386-tdep.c i386-linux-nat.c \
1431 i386v4-nat.c i386-cygwin-tdep.c \
1432 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1433 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1435 i386-darwin-tdep.c i386-darwin-nat.c \
1437 i386-linux-tdep.c i386-nat.c \
1438 i386-sol2-nat.c i386-sol2-tdep.c \
1439 i386gnu-nat.c i386gnu-tdep.c \
1440 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1441 inf-ptrace.c inf-ttrace.c \
1450 m32r-linux-nat.c m32r-linux-tdep.c \
1452 m68kbsd-nat.c m68kbsd-tdep.c \
1453 m68klinux-nat.c m68klinux-tdep.c \
1454 m88k-tdep.c m88kbsd-nat.c \
1455 microblaze-tdep.c microblaze-linux-tdep.c \
1457 mips-linux-nat.c mips-linux-tdep.c \
1460 mipsnbsd-nat.c mipsnbsd-tdep.c \
1461 mips64obsd-nat.c mips64obsd-tdep.c \
1462 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1465 somread.c solib-som.c \
1467 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1468 ppcnbsd-nat.c ppcnbsd-tdep.c \
1469 ppcobsd-nat.c ppcobsd-tdep.c \
1471 remote-m32r-sdi.c remote-mips.c \
1474 rs6000-nat.c rs6000-tdep.c \
1475 s390-tdep.c s390-nat.c \
1477 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1478 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1480 solib-irix.c solib-svr4.c solib-sunos.c \
1481 sparc-linux-nat.c sparc-linux-tdep.c \
1482 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1483 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1484 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1485 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1486 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1487 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1489 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1490 windows-nat.c windows-tdep.c \
1491 xcoffread.c xcoffsolib.c \
1493 xtensa-tdep.c xtensa-config.c \
1494 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1496 # Some files need explicit build rules (due to -Werror problems) or due
1497 # to sub-directory fun 'n' games.
1499 hpux-thread.o
: $(srcdir)/hpux-thread.c
1500 $(COMPILE
) -I
$(srcdir)/osf-share
-I
$(srcdir)/osf-share
/HP800 \
1501 -I
/usr
/include/dce
$(srcdir)/hpux-thread.c
1504 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1505 main.o
: $(srcdir)/main.c
1506 $(COMPILE
) $(TARGET_SYSTEM_ROOT_DEFINE
) -DBINDIR
=\"$(bindir)\" $(srcdir)/main.c
1509 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1510 # errors. It turns out that that is the least of monitor.c's
1511 # problems. The function print_vsprintf appears to be using
1512 # va_arg(long) to extract CORE_ADDR parameters - something that
1513 # definitly will not work. "monitor.c" needs to be rewritten so that
1514 # it doesn't use format strings and instead uses callbacks.
1515 monitor.o
: $(srcdir)/monitor.c
1516 $(COMPILE.pre
) $(INTERNAL_WARN_CFLAGS
) $(COMPILE.post
) $(srcdir)/monitor.c
1519 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1520 # checks format strings.
1521 printcmd.o
: $(srcdir)/printcmd.c
1522 $(COMPILE.pre
) $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1523 $(GDB_WERROR_CFLAGS
) $(COMPILE.post
) $(srcdir)/printcmd.c
1526 # Message files. Based on code in gcc/Makefile.in.
1528 # Rules for generating translated message descriptions. Disabled by
1529 # autoconf if the tools are not available.
1531 .SUFFIXES
: .po .gmo .pox .pot
1532 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1536 # This notation should be acceptable to all Make implementations used
1537 # by people who are interested in updating .po files.
1538 update-po
: $(CATALOGS
:.gmo
=.pox
)
1540 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1543 -test -d po || mkdir po
1544 $(GMSGFMT
) --statistics
-o
$@
$<
1546 # The new .po has to be gone over by hand, so we deposit it into
1547 # build/po with a different extension. If build/po/$(PACKAGE).pot
1548 # exists, use it (it was just created), else use the one in srcdir.
1550 -test -d po || mkdir po
1551 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1552 then echo po/$(PACKAGE).pot; \
1553 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1555 # This rule has to look for .gmo modules in both srcdir and the cwd,
1556 # and has to check that we actually have a catalog for each language,
1557 # in case they weren't built or included with the distribution.
1559 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1560 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1561 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1562 if
[ -f
$$cat ]; then
:; \
1563 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1566 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1567 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1568 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1569 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1570 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1573 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1574 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1575 if
[ -f
$$cat ]; then
:; \
1576 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1579 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1580 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1582 # Delete po/*.gmo only if we are not building in the source directory.
1584 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1586 # Rule for regenerating the message template (gdb.pot). Instead of
1587 # forcing everyone to edit POTFILES.in, which proved impractical, this
1588 # rule has no dependencies and always regenerates gdb.pot. This is
1589 # relatively harmless since the .po files do not directly depend on
1590 # it. The .pot file is left in the build directory. Since GDB's
1591 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1592 # files) force this rule.
1593 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1594 po
/$(PACKAGE
).pot
: force
1595 -test -d po || mkdir po
1596 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1600 # YACC/LEX dependencies
1602 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1603 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1604 # said LANG-exp.c rather than ./c-exp.c some makes would
1605 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1606 # decls for malloc/realloc/free which conflict with everything else.
1607 # Strictly speaking c-exp.c should therefore depend on
1608 # Makefile.in, but that was a pretty big annoyance.
1612 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@.tmp
-- $(YACC
) $(YFLAGS
)
1613 -sed
-e
'/extern.*malloc/d' \
1614 -e
'/extern.*realloc/d' \
1615 -e
'/extern.*free/d' \
1616 -e
'/include.*malloc.h/d' \
1617 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1618 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1619 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1620 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1621 -e
'/^#line.*y.tab.c/d' \
1626 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1627 $(FLEX
) -o
$@
$< && \
1629 sed
-e
'/extern.*malloc/d' \
1630 -e
'/extern.*realloc/d' \
1631 -e
'/extern.*free/d' \
1632 -e
'/include.*malloc.h/d' \
1633 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1634 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1635 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1636 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1637 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1641 elif
[ -f
$@
]; then \
1642 echo
"Warning: $*.c older than $*.l and flex not available."; \
1644 echo
"$@ missing and flex not available."; \
1648 .PRECIOUS
: ada-exp.c ada-lex.c
1653 .PRECIOUS
: objc-exp.c
1658 xml-builtin.c
: stamp-xml
; @true
1659 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1660 rm -f xml-builtin.tmp
1662 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1663 xml-builtin.tmp
$(XMLFILES
)
1664 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1665 echo stamp
> stamp-xml
1667 .PRECIOUS
: xml-builtin.c
1670 # gdb/cli/ dependencies
1672 # Need to explicitly specify the compile rule as make will do nothing
1673 # or try to compile the object file into the sub-directory.
1675 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1676 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1679 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1680 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1683 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1684 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1687 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1688 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1691 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1692 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1695 cli-script.o
: $(srcdir)/cli
/cli-script.c
1696 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1699 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1700 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1705 # GDBTK sub-directory
1707 # Need to explicitly specify the compile rule as make will do nothing
1708 # or try to compile the object file into the mi directory.
1710 all-gdbtk
: insight
$(EXEEXT
)
1713 transformed_name
=`t='$(program_transform_name)'; \
1714 echo insight | sed -e $$t` ; \
1715 if
test "x$$transformed_name" = x
; then \
1716 transformed_name
=insight
; \
1720 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1721 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1722 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1723 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1724 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1725 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1726 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1727 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1728 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1729 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1730 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1731 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1732 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1733 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1734 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1735 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1736 cd
$(srcdir)/gdbtk
/library
; \
1737 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1739 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1743 transformed_name
=`t='$(program_transform_name)'; \
1744 echo insight | sed -e $$t` ; \
1745 if
test "x$$transformed_name" = x
; then \
1746 transformed_name
=insight
; \
1750 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1751 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1754 rm -f insight
$(EXEEXT
)
1756 # Removing the old gdb first works better if it is running, at least on SunOS.
1757 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1758 $(CDEPS
) $(TDEPLIBS
)
1759 rm -f insight
$(EXEEXT
)
1760 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1761 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1762 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1764 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1765 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1767 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1768 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1770 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1771 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1773 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1774 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1777 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1778 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1781 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1782 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1785 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1786 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1789 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1790 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1793 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1794 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1797 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1798 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1801 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1802 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1805 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1806 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1809 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1810 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1815 # gdb/mi/ dependencies
1817 # Need to explicitly specify the compile rule as make will do nothing
1818 # or try to compile the object file into the sub-directory.
1820 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1821 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1824 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1825 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1828 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1829 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1832 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1833 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1836 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1837 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1840 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1841 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1844 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1845 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1848 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1849 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1852 mi-console.o
: $(srcdir)/mi
/mi-console.c
1853 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1856 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1857 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1860 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1861 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1864 mi-main.o
: $(srcdir)/mi
/mi-main.c
1865 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1868 mi-out.o
: $(srcdir)/mi
/mi-out.c
1869 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1872 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1873 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1876 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1877 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1880 mi-common.o
: $(srcdir)/mi
/mi-common.c
1881 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1885 # gdb/common/ dependencies
1887 # Need to explicitly specify the compile rule as make will do nothing
1888 # or try to compile the object file into the sub-directory.
1890 signals.o
: $(srcdir)/common
/signals.c
1891 $(COMPILE
) $(srcdir)/common
/signals.c
1895 # gdb/tui/ dependencies
1897 # Need to explicitly specify the compile rule as make will do nothing
1898 # or try to compile the object file into the sub-directory.
1900 tui.o
: $(srcdir)/tui
/tui.c
1901 $(COMPILE
) $(srcdir)/tui
/tui.c
1904 tui-command.o
: $(srcdir)/tui
/tui-command.c
1905 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1908 tui-data.o
: $(srcdir)/tui
/tui-data.c
1909 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1912 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1913 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1916 tui-file.o
: $(srcdir)/tui
/tui-file.c
1917 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1920 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1921 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1924 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1925 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1928 tui-io.o
: $(srcdir)/tui
/tui-io.c
1929 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1932 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1933 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1936 tui-main.o
: $(srcdir)/tui
/tui-main.c
1937 $(COMPILE
) $(srcdir)/tui
/tui-main.c
1940 tui-out.o
: $(srcdir)/tui
/tui-out.c
1941 $(COMPILE
) $(srcdir)/tui
/tui-out.c
1944 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
1945 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
1948 tui-source.o
: $(srcdir)/tui
/tui-source.c
1949 $(COMPILE
) $(srcdir)/tui
/tui-source.c
1952 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
1953 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
1956 tui-win.o
: $(srcdir)/tui
/tui-win.c
1957 $(COMPILE
) $(srcdir)/tui
/tui-win.c
1960 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
1961 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
1964 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
1965 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
1968 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
1969 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
1973 # gdb/python/ dependencies
1975 # Need to explicitly specify the compile rule as make will do nothing
1976 # or try to compile the object file into the sub-directory.
1978 # Flags needed to compile Python code
1979 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
1981 python.o
: $(srcdir)/python
/python.c
1982 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
1985 py-block.o
: $(srcdir)/python
/py-block.c
1986 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
1989 py-cmd.o
: $(srcdir)/python
/py-cmd.c
1990 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
1993 py-frame.o
: $(srcdir)/python
/py-frame.c
1994 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
1997 py-function.o
: $(srcdir)/python
/py-function.c
1998 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2001 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2002 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2005 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2006 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2009 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2010 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2013 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2014 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2017 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2018 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2021 py-type.o
: $(srcdir)/python
/py-type.c
2022 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2025 py-utils.o
: $(srcdir)/python
/py-utils.c
2026 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2029 py-value.o
: $(srcdir)/python
/py-value.c
2030 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2034 # Dependency tracking. Most of this is conditional on GNU Make being
2035 # found by configure; if GNU Make is not found, we fall back to a
2039 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2040 # Note that we put the dependencies into a .Tpo file, then move them
2041 # into place if the compile succeeds. We need this because gcc does
2042 # not atomically write the dependency output file.
2043 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2044 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2045 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2046 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2048 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2049 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2050 # depcomp handles atomicity for us, so we don't need a postcompile
2052 @GMAKE_TRUE@
override POSTCOMPILE
=
2055 # A list of all the objects we might care about in this build, for
2056 # dependency tracking.
2057 all_object_files
= gdb.o tui-main.o
$(LIBGDB_OBS
) gdbtk-main.o \
2058 test-cp-name-parser.o
2060 # Ensure that generated files are created early. Use order-only
2061 # dependencies if available. They require GNU make 3.80 or newer,
2062 # and the .VARIABLES variable was introduced at the same time.
2063 @GMAKE_TRUE@
ifdef .VARIABLES
2064 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2066 $(all_object_files
) : $(generated_files
)
2070 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2072 ### end of the gdb Makefile.in.