1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
3 # Free Software Foundation, Inc.
5 # This file is part of GDB.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 3 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program. If not, see <http://www.gnu.org/licenses/>.
21 exec_prefix = @
exec_prefix@
23 host_alias
= @host_alias@
24 target_alias
= @target_alias@
25 program_transform_name
= @program_transform_name@
28 tooldir
= $(libdir)/$(target_alias
)
31 localedir
= @localedir@
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
43 datarootdir
= @datarootdir@
47 includedir = @
includedir@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_DATA
= @INSTALL_DATA@
79 # If you are compiling with GCC, make sure that either 1) You have the
80 # fixed include files where GCC can reach them, or 2) You use the
81 # -traditional flag. Otherwise the ioctl calls in inflow.c
82 # will be incorrectly compiled. The "fixincludes" script in the gcc
83 # distribution will fix your include files up.
86 # Dependency tracking information.
89 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
91 # Note that these are overridden by GNU make-specific code below if
92 # GNU make is used. The overrides implement dependency tracking.
94 COMPILE.post
= -c
-o
$@
95 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
98 # Directory containing source files.
104 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
105 # not defined, but ada-lex.c is present, compilation will continue,
106 # possibly with a warning.
109 YLWRAP
= $(srcdir)/..
/ylwrap
111 # where to find makeinfo, preferably one designed for texinfo-2
114 MAKEHTML
= $(MAKEINFO
) --html
117 # Set this up with gcc if you have gnu ld and the loader will print out
118 # line numbers for undefined references.
122 # Where is our "include" directory? Typically $(srcdir)/../include.
123 # This is essentially the header file directory for the library
124 # routines in libiberty.
125 INCLUDE_DIR
= $(srcdir)/..
/include
126 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
128 # Where is the "-liberty" library? Typically in ../libiberty.
129 LIBIBERTY
= ..
/libiberty
/libiberty.a
131 # Where is the BFD library? Typically in ../bfd.
133 BFD
= $(BFD_DIR
)/libbfd.a
134 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
135 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
137 # Where is the decnumber library? Typically in ../libdecnumber.
138 LIBDECNUMBER_DIR
= ..
/libdecnumber
139 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
140 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
141 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
143 # Where is the READLINE library? Typically in ../readline.
144 READLINE_DIR
= ..
/readline
145 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
146 READLINE
= @READLINE@
147 READLINE_DEPS
= @READLINE_DEPS@
148 READLINE_CFLAGS
= @READLINE_CFLAGS@
150 # Where is expat? This will be empty if expat was not available.
151 LIBEXPAT
= @LIBEXPAT@
153 WARN_CFLAGS
= @WARN_CFLAGS@
154 WERROR_CFLAGS
= @WERROR_CFLAGS@
155 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
156 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
158 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
160 # Where is the INTL library? Typically in ../intl.
162 INTL_DEPS
= @LIBINTL_DEP@
163 INTL_CFLAGS
= @INCINTL@
165 # Did the user give us a --with-sysroot option?
166 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
167 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
169 # Did the user give us a --with-gdb-datadir option?
170 GDB_DATADIR
= @GDB_DATADIR@
172 # Helper code from gnulib.
173 LIBGNU
= gnulib
/libgnu.a
174 INCGNU
= -I
$(srcdir)/gnulib
-Ignulib
176 # Generated headers in the gnulib directory. These must be listed
177 # so that they are generated before other files are compiled.
178 GNULIB_H
= gnulib
/string.h @GNULIB_STDINT_H@
181 # CLI sub directory definitons
185 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
190 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
198 # MI sub directory definitons
201 mi-out.o mi-console.o \
202 mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
203 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
205 mi-main.o mi-parse.o mi-getopt.o
207 mi
/mi-out.c mi
/mi-console.c \
208 mi
/mi-cmds.c mi
/mi-cmd-env.c \
209 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
210 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
211 mi
/mi-cmd-target.c mi
/mi-interp.c \
212 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
219 # TUI sub directory definitions
222 # Name of the TUI program
257 tui
/tui-wingeneral.c \
258 tui
/tui-winsource.c \
266 # python sub directory definitons
268 SUBDIR_PYTHON_OBS
= \
286 SUBDIR_PYTHON_SRCS
= \
288 python
/py-auto-load.c \
290 python
/py-breakpoint.c \
293 python
/py-function.c \
294 python
/py-lazy-string.c \
295 python
/py-objfile.c \
297 python
/py-prettyprint.c \
298 python
/py-progspace.c \
305 SUBDIR_PYTHON_LDFLAGS
=
306 SUBDIR_PYTHON_CFLAGS
=
309 # Opcodes currently live in one of two places. Either they are in the
310 # opcode library, typically ../opcodes, or they are in a header file
312 # Where is the "-lopcodes" library, with (some of) the opcode tables and
314 OPCODES_DIR
= ..
/opcodes
315 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
316 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
317 # Where are the other opcode tables which only have header file
319 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
320 # Some source files like to use #include "opcodes/file.h"
321 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
323 # The simulator is usually nonexistent; targets that include one
324 # should set this to list all the .o or .a files to be linked in.
327 WIN32LIBS
= @WIN32LIBS@
329 # Tcl et al cflags and libraries
331 TCL_CFLAGS
= @TCL_INCLUDE@
332 GDBTKLIBS
= @GDBTKLIBS@
333 # Extra flags that the GDBTK files need:
334 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
337 TK_CFLAGS
= @TK_INCLUDE@
339 X11_CFLAGS
= @TK_XINCLUDES@
343 WIN32LDAPP
= @WIN32LDAPP@
346 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
347 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
349 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
351 # The version of gdbtk we're building. This should be kept
352 # in sync with GDBTK_VERSION and friends in gdbtk.h.
354 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
356 # Gdbtk requires an absolute path to the source directory or
357 # the testsuite won't run properly.
358 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
361 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
362 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
363 SUBDIR_GDBTK_SRCS
= \
364 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
365 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
366 gdbtk
/generic
/gdbtk-interp.c \
367 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
368 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
369 gdbtk
/generic
/gdbtk-main.c
370 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
371 SUBDIR_GDBTK_LDFLAGS
=
372 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
374 CONFIG_OBS
= @CONFIG_OBS@
375 CONFIG_SRCS
= @CONFIG_SRCS@
376 CONFIG_DEPS
= @CONFIG_DEPS@
377 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
378 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
379 CONFIG_ALL
= @CONFIG_ALL@
380 CONFIG_CLEAN
= @CONFIG_CLEAN@
381 CONFIG_INSTALL
= @CONFIG_INSTALL@
382 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
384 # -I. for config files.
385 # -I$(srcdir) for gdb internal headers.
386 # -I$(srcdir)/config for more generic config files.
388 # It is also possible that you will need to add -I/usr/include/sys if
389 # your system doesn't have fcntl.h in /usr/include (which is where it
390 # should be according to Posix).
392 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
393 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
395 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
396 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
398 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
400 # CFLAGS is specifically reserved for setting from the command line
401 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
404 # Set by configure, for e.g. expat.
405 INTERNAL_CPPFLAGS
= @CPPFLAGS@
407 # Need to pass this to testsuite for "make check". Probably should be
408 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
409 # so "make check" has the same result no matter where it is run.
412 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
413 INTERNAL_CFLAGS_BASE
= \
414 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
415 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
416 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
417 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
418 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
419 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
421 # LDFLAGS is specifically reserved for setting from the command line
425 # Profiling options need to go here to work.
426 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
427 # and have it work; that's why CFLAGS is here.
428 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
429 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
431 # If your system is missing alloca(), or, more likely, it's there but
432 # it doesn't work, then refer to libiberty.
434 # Libraries and corresponding dependencies for compiling gdb.
435 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
436 # LIBIBERTY appears twice on purpose.
437 # If you have the Cygnus libraries installed,
438 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
439 INSTALLED_LIBS
=-lbfd
-lreadline
-lopcodes
-liberty
-ldecnumber \
440 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
441 -lintl
-liberty
$(LIBGNU
)
442 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
443 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
445 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
446 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
447 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
449 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
450 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
455 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
456 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
462 # XML files to build in to GDB.
463 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
464 $(srcdir)/features
/library-list.dtd
$(srcdir)/features
/osdata.dtd \
465 $(srcdir)/features
/threads.dtd
467 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
468 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
469 # etc., then there will be (as part of the C library or perhaps as
470 # part of libiberty) a POSIX interface. But at least for now the
471 # host-dependent makefile fragment might need to use something else
473 SER_HARDWIRE
= @SER_HARDWIRE@
475 # The `remote' debugging target is supported for most architectures,
476 # but not all (e.g. 960)
477 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
479 # This is remote-sim.o if a simulator is to be linked in.
482 # Target-dependent object files.
483 TARGET_OBS
= @TARGET_OBS@
485 # All target-dependent objects files that require 64-bit CORE_ADDR
486 # (used with --enable-targets=all --enable-64-bit-bfd).
487 ALL_64_TARGET_OBS
= \
488 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
489 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
490 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
491 amd64-linux-tdep.o amd64nbsd-tdep.o \
492 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
493 ia64-linux-tdep.o ia64-tdep.o \
495 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
496 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
498 # All other target-dependent objects files (used with --enable-targets=all).
500 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
501 armnbsd-tdep.o armobsd-tdep.o \
502 arm-tdep.o arm-wince-tdep.o \
506 frv-linux-tdep.o frv-tdep.o \
508 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
509 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
510 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
511 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
512 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
513 i386-dicos-tdep.o i386-darwin-tdep.o \
518 m32r-linux-tdep.o m32r-tdep.o \
520 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
523 microblaze-tdep.o microblaze-linux-tdep.o \
524 mips-irix-tdep.o mips-linux-tdep.o \
525 mipsnbsd-tdep.o mips-tdep.o \
526 mn10300-linux-tdep.o mn10300-tdep.o \
530 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
531 rs6000-aix-tdep.o rs6000-tdep.o \
534 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
535 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
536 sparc-sol2-tdep.o sparc-tdep.o \
537 spu-tdep.o spu-multiarch.o solib-spu.o \
539 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
541 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
544 nbsd-tdep.o obsd-tdep.o \
546 solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
547 solib-som.o solib-pa64.o solib-darwin.o \
548 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
556 # Host-dependent makefile fragment comes in here.
558 # End of host-dependent makefile fragment
562 "exec_prefix=$(exec_prefix)" \
563 "infodir=$(infodir)" \
564 "datarootdir=$(datarootdir)" \
566 "htmldir=$(htmldir)" \
570 "datadir=$(datadir)" \
571 "includedir=$(includedir)" \
572 "against=$(against)" \
573 "DESTDIR=$(DESTDIR)" \
575 "AR_FLAGS=$(AR_FLAGS)" \
579 "CXXFLAGS=$(CXXFLAGS)" \
580 "DLLTOOL=$(DLLTOOL)" \
581 "LDFLAGS=$(LDFLAGS)" \
583 "MAKEINFO=$(MAKEINFO)" \
584 "MAKEHTML=$(MAKEHTML)" \
585 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
586 "INSTALL=$(INSTALL)" \
587 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
588 "INSTALL_DATA=$(INSTALL_DATA)" \
589 "RUNTEST=$(RUNTEST)" \
590 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
592 # Flags that we pass when building the testsuite.
594 # empty for native, $(target_alias)/ for cross
595 target_subdir
= @target_subdir@
598 if [ -f $${rootme}/../gcc/xgcc ] ; then \
599 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
600 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
602 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
605 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
608 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
614 if [ -f $${rootme}/../gcc/xgcc ] ; then \
615 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
616 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
618 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
621 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
624 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
628 # The use of $$(x_FOR_TARGET) reduces the command line length by not
629 # duplicating the lengthy definition.
630 TARGET_FLAGS_TO_PASS
= \
632 "exec_prefix=$(exec_prefix)" \
633 "against=$(against)" \
634 'CC=$$(CC_FOR_TARGET)' \
635 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
637 'CXX=$$(CXX_FOR_TARGET)' \
638 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
639 "CXXFLAGS=$(CXXFLAGS)" \
640 "INSTALL=$(INSTALL)" \
641 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
642 "INSTALL_DATA=$(INSTALL_DATA)" \
643 "MAKEINFO=$(MAKEINFO)" \
644 "MAKEHTML=$(MAKEHTML)" \
645 "RUNTEST=$(RUNTEST)" \
646 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
647 "FORCE_PARALLEL=$(FORCE_PARALLEL)"
649 # All source files that go into linking GDB.
650 # Links made at configuration time should not be specified here, since
651 # SFILES is used in building the distribution archive.
653 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
655 auxv.c ax-general.c ax-gdb.c \
658 block.c blockframe.c breakpoint.c buildsym.c \
659 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
660 charset.c cli-out.c coffread.c coff-pe-read.c \
661 complaints.c completer.c corefile.c \
662 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
663 d-lang.c d-valprint.c \
665 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
666 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
667 elfread.c environ.c eval.c event-loop.c event-top.c \
668 exceptions.c expprint.c \
669 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
670 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
671 gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
674 infcmd.c inflow.c infrun.c \
677 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
678 language.c linespec.c \
679 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
680 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
681 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
683 objc-exp.y objc-lang.c \
684 objfiles.c osabi.c observer.c osdata.c \
685 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
687 prologue-value.c psymtab.c \
688 regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
689 scm-exp.c scm-lang.c scm-valprint.c \
691 serial.c ser-base.c ser-unix.c \
692 solib.c solib-null.c source.c \
693 stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
695 target.c target-descriptions.c target-memory.c \
696 thread.c top.c tracepoint.c \
700 ui-out.c utils.c ui-file.h ui-file.c \
702 valarith.c valops.c valprint.c value.c varobj.c vec.c \
704 xml-tdesc.c xml-support.c \
705 inferior.c gdb_usleep.c \
710 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
712 # Header files that need to have srcdir added. Note that in the cases
713 # where we use a macro like $(gdbcmd_h), things are carefully arranged
714 # so that each .h file is listed exactly once (M-x tags-search works
715 # wrong if TAGS has files twice). Because this is tricky to get
716 # right, it is probably easiest just to list .h files here directly.
718 HFILES_NO_SRCDIR
= osf-share
/cma_debug_client.h \
719 osf-share
/HP800
/cma_thread_io.h osf-share
/cma_sequence.h \
720 osf-share
/cma_mutex.h osf-share
/cma_semaphore_defs.h \
721 osf-share
/cma_list.h osf-share
/cma_handle.h osf-share
/cma_stack.h \
722 osf-share
/cma_util.h osf-share
/RIOS
/cma_thread_io.h \
723 osf-share
/cma_errors.h osf-share
/cma_tcb_defs.h osf-share
/cma_attr.h \
724 osf-share
/cma_stack_int.h osf-share
/cma_init.h \
725 osf-share
/cma_deb_core.h osf-share
/AT386
/cma_thread_io.h \
726 osf-share
/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
727 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
728 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
729 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
730 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
731 c-lang.h d-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
732 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-dump.h \
733 cli
/cli-script.h macrotab.h symtab.h version.h gnulib
/wchar.in.h \
734 gnulib
/string.in.h gnulib
/str-two-way.h gnulib
/extra
/link-warning.h \
735 gnulib
/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver
/win32-low.h \
736 gdbserver
/i387-fp.h gdbserver
/server.h gdbserver
/terminal.h \
737 gdbserver
/mem-break.h gdbserver
/wincecompat.h gdbserver
/target.h \
738 gdbserver
/linux-low.h gdbserver
/gdb_proc_service.h \
739 gdbserver
/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
740 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
741 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
742 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
743 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
744 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
745 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
746 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
747 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
748 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
749 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
750 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
751 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
752 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
753 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
754 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
755 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
756 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
757 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
758 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
759 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
760 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
761 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
762 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
763 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
764 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
765 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
766 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
767 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
768 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
769 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
770 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
771 config
/i386
/nm-fbsd.h config
/i386
/nm-linux.h \
772 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
773 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
774 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
775 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
776 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
777 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \
780 # Header files that already have srcdir in them, or which are in objdir.
782 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h
785 # GDB "info" files, which should be included in their entirety
786 INFOFILES
= gdb.
info*
788 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
790 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
791 # default their values the way we do for SER_HARDWIRE; in the future
792 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
793 # variables analogous to SER_HARDWIRE which get defaulted in this
796 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
797 $(REMOTE_OBS
) $(SIM_OBS
)
799 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
800 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
801 # and it's more useful to see it in the .y file.
802 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
804 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
806 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
812 blockframe.o breakpoint.o findvar.o regcache.o \
813 charset.o disasm.o dummy-frame.o dfp.o \
814 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
815 block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
818 expprint.o environ.o stack.o thread.o \
824 macrotab.o macrocmd.o macroexp.o macroscope.o \
826 event-loop.o event-top.o inf-loop.o completer.o \
827 gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
828 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
833 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
834 dbxread.o coffread.o coff-pe-read.o \
835 dwarf2read.o mipsread.o stabsread.o corefile.o \
836 dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
837 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
840 varobj.o vec.o wrapper.o \
841 jv-lang.o jv-valprint.o jv-typeprint.o \
842 m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
843 scm-exp.o scm-lang.o scm-valprint.o \
845 complaints.o typeprint.o \
846 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
847 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
849 serial.o mdebugread.o top.o utils.o \
852 frame.o frame-unwind.o doublest.o \
855 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
857 reggroups.o regset.o \
860 solib.o solib-null.o \
861 prologue-value.o memory-map.o xml-support.o xml-syscall.o \
862 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
863 inferior.o osdata.o gdb_usleep.o record.o gcore.o \
866 # Definitions for the syscall's XML files and dir
867 XML_SYSCALLS_DIR
= syscalls
/
868 XML_SYSCALLS_FILES
= gdb-syscalls.dtd \
869 ppc-linux.xml ppc64-linux.xml \
870 i386-linux.xml amd64-linux.xml \
871 sparc-linux.xml sparc64-linux.xml
876 CLEANDIRS
= $(SUBDIRS
) gnulib
878 # For now, shortcut the "configure GDB for fewer languages" stuff.
885 f-exp.c m2-exp.c p-exp.c
891 f-exp.o m2-exp.o p-exp.o
893 # Things which need to be built when making a distribution.
895 DISTSTUFF
= $(YYFILES
)
898 # All generated files which can be included by another file.
899 generated_files
= config.h observer.h observer.inc ada-lex.c \
900 $(GNULIB_H
) $(NAT_GENERATED_FILES
)
906 all: gdb
$(EXEEXT
) $(CONFIG_ALL
) xml-syscall-copy
907 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
909 all-tui
: $(TUI
)$(EXEEXT
)
911 # This is needed for running GDB from the build directory
912 .PHONY
: xml-syscall-copy
914 if
[ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
915 mkdir
-p .
/$(XML_SYSCALLS_DIR
) ; \
916 list
='$(XML_SYSCALLS_FILES)' ; \
917 for file in
$$list ; do \
918 f
=$(srcdir)/$(XML_SYSCALLS_DIR
)/$$file ; \
919 if
test -f
$$f ; then \
920 $(INSTALL_DATA
) $$f \
921 .
/$(XML_SYSCALLS_DIR
) ; \
926 # This target is responsible for properly installing the syscalls'
927 # XML files in the system.
928 .PHONY
: xml-syscall-install
930 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
931 $(DESTDIR
)$(GDB_DATADIR
)/$(XML_SYSCALLS_DIR
) ; \
932 list
='$(XML_SYSCALLS_FILES)' ; \
933 for file in
$$list ; do \
934 f
=$(srcdir)/$(XML_SYSCALLS_DIR
)/$$file ; \
935 if
test -f
$$f ; then \
936 $(INSTALL_DATA
) $$f \
937 $(DESTDIR
)$(GDB_DATADIR
)/$(XML_SYSCALLS_DIR
) ; \
943 # The check target can not use subdir_do, because subdir_do does not
944 # use TARGET_FLAGS_TO_PASS.
946 @if
[ -f testsuite
/Makefile
]; then \
947 rootme
=`pwd`; export rootme
; \
948 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
950 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
953 # The idea is to parallelize testing of multilibs, for example:
954 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
955 # will run 3 concurrent sessions of check, eventually testing all 10
956 # combinations. GNU make is required for the % pattern to work, as is
957 # a shell that expands alternations within braces. If GNU make is not
958 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
959 # prevent serialized checking due to the passed RUNTESTFLAGS.
960 # FIXME: use config.status --config not --version, when available.
962 @if
[ -f testsuite
/config.status
]; then \
963 rootme
=`pwd`; export rootme
; \
964 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
965 target
=`echo "$@" | sed 's,//.*,,'`; \
966 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
967 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
968 testdir
=testsuite.
$$vardots; \
969 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
970 configargs
=`cd testsuite && ./config.status --version | \
971 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
972 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
974 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
975 "\"--srcdir=\$$rootsrc/testsuite\"" \
977 else :; fi
&& cd
$$testdir && \
978 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
979 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
980 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
984 info install-info clean-info
dvi pdf install-pdf html install-html
: force
985 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
988 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
989 pack gdb.t
; rm -f gdb.t
992 # Traditionally "install" depends on "all". But it may be useful
993 # not to; for example, if the user has made some trivial change to a
994 # source file and doesn't care about rebuilding or just wants to save the
995 # time it takes for make to check that all is up to date.
996 # install-only is intended to address that need.
997 install: all install-only
999 # The "install-only" target also installs the syscalls' XML files in
1001 install-only
: $(CONFIG_INSTALL
) xml-syscall-install
1002 transformed_name
=`t='$(program_transform_name)'; \
1003 echo gdb | sed -e "$$t"` ; \
1004 if
test "x$$transformed_name" = x
; then \
1005 transformed_name
=gdb
; \
1009 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1010 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1011 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1012 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1013 $(DESTDIR
)$(man1dir) ; \
1014 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1015 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1016 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1019 transformed_name
=`t='$(program_transform_name)'; \
1020 echo $(TUI) | sed -e "$$t"` ; \
1021 if
test "x$$transformed_name" = x
; then \
1022 transformed_name
=$(TUI
) ; \
1026 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1027 $(INSTALL_PROGRAM
) $(TUI
)$(EXEEXT
) \
1028 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1029 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1030 $(DESTDIR
)$(man1dir) ; \
1031 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1032 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1035 uninstall: force $(CONFIG_UNINSTALL
)
1036 transformed_name
=`t='$(program_transform_name)'; \
1037 echo gdb | sed -e $$t` ; \
1038 if
test "x$$transformed_name" = x
; then \
1039 transformed_name
=gdb
; \
1043 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1044 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1045 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1046 .PHONY
: uninstall-tui
1048 transformed_name
=`t='$(program_transform_name)'; \
1049 echo $(TUI) | sed -e $$t` ; \
1050 if
test "x$$transformed_name" = x
; then \
1051 transformed_name
=$(TUI
) ; \
1055 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1056 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1058 # The C++ name parser can be built standalone for testing.
1059 test-cp-name-parser.o
: cp-name-parser.c
1060 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1063 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1064 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1065 test-cp-name-parser.o
$(LIBIBERTY
)
1067 # We do this by grepping through sources. If that turns out to be too slow,
1068 # maybe we could just require every .o file to have an initialization routine
1069 # of a given name (top.o -> _initialize_top, etc.).
1071 # Formatting conventions: The name of the _initialize_* routines must start
1072 # in column zero, and must not be inside #if.
1074 # Note that the set of files with init functions might change, or the names
1075 # of the functions might change, so this files needs to depend on all the
1076 # object files that will be linked into gdb.
1078 # FIXME: There is a problem with this approach - init.c may force
1079 # unnecessary files to be linked in.
1081 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1082 # the first call is to _initialize_gdbtypes (implemented by explicitly
1083 # putting that function's name first in the init.l-tmp file). This is
1084 # a hack to ensure that all the architecture dependant global
1085 # builtin_type_* variables are initialized before anything else
1086 # (per-architecture code is called in the same order that it is
1087 # registered). The ``correct fix'' is to have all the builtin types
1088 # made part of the architecture and initialize them on-demand (using
1089 # gdbarch_data) just like everything else. The catch is that other
1090 # modules still take the address of these builtin types forcing them
1091 # to be variables, sigh!
1093 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1094 # anchored on the first column and excludes the ``/'' character so
1095 # that it doesn't add the $(srcdir) prefix to any file that already
1096 # has an absolute path. It turns out that $(DEC)'s True64 make
1097 # automatically adds the $(srcdir) prefixes when it encounters files
1098 # in sub-directories such as cli/ and mi/.
1100 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1101 # duplicates. Files in the gdb/ directory can end up appearing in
1102 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1104 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1105 init.c
: $(INIT_FILES
)
1107 @
rm -f init.c-tmp init.l-tmp
1109 @echo gdbtypes
> init.l-tmp
1110 @
-LANG
=C
; export LANG
; \
1111 LC_ALL
=C
; export LC_ALL
; \
1112 echo
$(INIT_FILES
) | \
1115 -e
'/^gdbtypes.[co]$$/d' \
1116 -e
'/^init.[co]$$/d' \
1117 -e
'/xdr_ld.[co]$$/d' \
1118 -e
'/xdr_ptrace.[co]$$/d' \
1119 -e
'/xdr_rdb.[co]$$/d' \
1120 -e
'/udr.[co]$$/d' \
1121 -e
'/udip2soc.[co]$$/d' \
1122 -e
'/udi2go32.[co]$$/d' \
1123 -e
'/version.[co]$$/d' \
1124 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1125 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1126 -e
's/\.[co]$$/.c/' \
1127 -e
's,signals\.c,common/signals\.c,' \
1128 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1130 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1135 * ) echo
$$f ; fs
="$$fs $$f";; \
1138 @echo
'/* Do not modify this file. */' >>init.c-tmp
1139 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1140 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1141 @echo
'#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
1142 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1143 @echo
'void' >>init.c-tmp
1144 @echo
'initialize_all_files (void)' >>init.c-tmp
1145 @echo
'{' >>init.c-tmp
1146 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1147 @echo
'}' >>init.c-tmp
1149 @mv init.c-tmp init.c
1153 # Removing the old gdb first works better if it is running, at least on SunOS.
1154 gdb
$(EXEEXT
): gdb.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1156 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1157 -o gdb
$(EXEEXT
) gdb.o libgdb.a \
1158 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1160 $(TUI
)$(EXEEXT
): tui-main.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1161 rm -f
$(TUI
)$(EXEEXT
)
1162 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1163 -o
$(TUI
)$(EXEEXT
) tui-main.o libgdb.a \
1164 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1166 # Convenience rule to handle recursion.
1167 $(LIBGNU
) $(GNULIB_H
): all-lib
1168 all-lib
: gnulib
/Makefile
1169 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=gnulib subdir_do
1172 # Create a library of the gdb object files and build GDB by linking
1175 # init.o is very important. It pulls in the rest of GDB.
1176 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1177 libgdb.a
: $(LIBGDB_OBS
)
1179 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1182 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1183 # on itself without copying the executable. So "make gdb1" will make
1184 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1185 # Removing gdb1 before the copy is the right thing if gdb1 is open
1186 # in another process.
1187 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1189 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1191 # Put the proper machine-specific files first, so M-. on a machine
1192 # specific routine gets the one for the correct machine. (FIXME: those
1193 # files go in twice; we should be removing them from the main list).
1195 # TAGS depends on all the files that go into it so you can rebuild TAGS
1196 # with `make TAGS' and not have to say `rm TAGS' first.
1198 GDB_NM_FILE
= @GDB_NM_FILE@
1199 TAGS
: $(DEPFILES
) $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1201 @etags
$(srcdir)/$(GDB_NM_FILE
) \
1202 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1203 echo $(srcdir)/$$i ; \
1204 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1206 done) | sed -e 's/\.o$$/\.c/'` \
1207 `find $(srcdir)/config -name '*.h' -print`
1211 clean mostlyclean: $(CONFIG_CLEAN
)
1212 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1213 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1214 rm -f init.c version.c
1215 rm -f gdb
$(EXEEXT
) core make.log
1216 rm -f gdb
[0-9]$(EXEEXT
)
1217 rm -f test-cp-name-parser
$(EXEEXT
)
1218 rm -f xml-builtin.c stamp-xml
1223 rm -f
$(TUI
)$(EXEEXT
)
1225 # This used to depend on c-exp.c m2-exp.c TAGS
1226 # I believe this is wrong; the makefile standards for distclean just
1227 # describe removing files; the only sort of "re-create a distribution"
1228 # functionality described is if the distributed files are unmodified.
1229 # NB: While GDBSERVER might be configured on native systems, it isn't
1230 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1232 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1233 rm -f gdbserver
/config.status gdbserver
/config.log
1234 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1235 rm -f gdbserver
/Makefile gdbserver
/config.cache
1236 rm -f nm.h config.status config.h stamp-h .gdbinit
1237 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1238 rm -f config.log config.cache
1242 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1243 realclean: maintainer-clean
1245 local-maintainer-clean
:
1246 @echo
"This command is intended for maintainers to use;"
1247 @echo
"it deletes files that may require special tools to rebuild."
1250 ada-lex.c ada-exp.c \
1253 f-exp.c m2-exp.c p-exp.c
1254 rm -f TAGS
$(INFOFILES
)
1256 rm -f nm.h config.status
1258 do-maintainer-clean
:
1259 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1262 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1263 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1266 @for i in
$(DODIRS
); do \
1267 if
[ -f .
/$$i/Makefile
] ; then \
1269 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1270 else exit
1 ; fi
; \
1274 Makefile
: Makefile.in config.status @frags@
1275 # Regenerate the Makefile and the tm.h / nm.h links.
1276 CONFIG_FILES
="Makefile" \
1279 $(SHELL
) config.status
1281 gnulib
/Makefile
: gnulib
/Makefile.in gnulib
/Makefile.in config.status @frags@
1282 CONFIG_FILES
="gnulib/Makefile" \
1283 CONFIG_COMMANDS
="depfiles" \
1286 $(SHELL
) config.status
1288 config.h
: stamp-h
; @true
1289 stamp-h
: $(srcdir)/config.in config.status
1290 CONFIG_HEADERS
=config.h
:config.in \
1291 CONFIG_COMMANDS
="default depdir" \
1294 $(SHELL
) config.status
1296 config.status
: $(srcdir)/configure configure.tgt configure.host
1297 $(SHELL
) config.status
--recheck
1300 ACLOCAL_AMFLAGS
= -I gnulib
/m4
1303 gnulib
/m4
/extensions.m4 \
1304 gnulib
/m4
/gnulib-common.m4 \
1305 gnulib
/m4
/gnulib-comp.m4 \
1306 gnulib
/m4
/include_next.m4 \
1307 gnulib
/m4
/longlong.m4 \
1308 gnulib
/m4
/memchr.m4 \
1309 gnulib
/m4
/memcmp.m4 \
1310 gnulib
/m4
/memmem.m4 \
1311 gnulib
/m4
/onceonly_2_57.m4 \
1312 gnulib
/m4
/stdint.m4 \
1313 gnulib
/m4
/string_h.m4 \
1314 gnulib
/m4
/wchar.m4 \
1315 ..
/config
/extensions.m4 \
1316 ..
/config
/lead-dot.m4 \
1317 ..
/config
/proginstall.m4 \
1319 ..
/config
/acinclude.m4 \
1320 ..
/config
/override.m4 \
1321 ..
/config
/gettext-sister.m4 \
1322 ..
/config
/lib-ld.m4 \
1323 ..
/config
/lib-prefix.m4 \
1324 ..
/config
/lib-link.m4 \
1327 ..
/config
/depstand.m4 \
1328 ..
/config
/lcmessage.m4 \
1329 ..
/config
/codeset.m4
1331 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1332 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1335 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1336 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1337 cd
$(srcdir) && $(AUTOCONF
)
1339 AUTOHEADER
= autoheader
1340 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1341 cd
$(srcdir) && $(AUTOHEADER
)
1345 # automatic rebuilding in automake-generated Makefiles requires
1346 # this rule in the toplevel Makefile, which, with GNU make, causes
1347 # the desired updates through the implicit regeneration of the Makefile
1348 # and all of its prerequisites.
1355 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1357 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1359 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1361 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1363 # GDB MANUAL: TeX dvi file
1365 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1367 # GDB MANUAL: info file
1369 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1371 # Make copying.c from COPYING
1372 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1373 awk
-f
$(srcdir)/copying.awk \
1374 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1375 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1377 version.c
: Makefile version.in
1378 rm -f version.c-tmp version.c
1379 echo
'#include "version.h"' >> version.c-tmp
1380 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1381 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1382 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1383 mv version.c-tmp version.c
1385 observer.h
: observer.sh doc
/observer.texi
1386 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1388 observer.inc
: observer.sh doc
/observer.texi
1389 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1392 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1393 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1395 gdb.cxref
: $(SFILES
)
1396 cxref
-I.
$(SFILES
) >gdb.cxref
1400 # GNU Make has an annoying habit of putting *all* the Makefile variables
1401 # into the environment, unless you include this target as a circumvention.
1402 # Rumor is that this will be fixed (and this target can be removed)
1406 # GNU Make 3.63 has a different problem: it keeps tacking command line
1407 # overrides onto the definition of $(MAKE). This variable setting
1413 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1414 alpha-tdep.c alpha-mdebug-tdep.c \
1415 alpha-linux-tdep.c alpha-osf1-tdep.c \
1416 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1417 amd64-nat.c amd64-tdep.c \
1418 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1419 amd64nbsd-nat.c amd64nbsd-tdep.c \
1420 amd64obsd-nat.c amd64obsd-tdep.c \
1421 amd64-darwin-tdep.c \
1422 amd64-dicos-tdep.c \
1423 amd64-linux-nat.c amd64-linux-tdep.c \
1425 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1426 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1428 bsd-uthread.c bsd-kvm.c \
1429 core-regset.c corelow.c \
1430 dcache.c dicos-tdep.c darwin-nat.c \
1435 go32-nat.c h8300-tdep.c \
1436 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1437 hppa-linux-tdep.c hppa-linux-nat.c \
1438 hppabsd-nat.c hppabsd-tdep.c \
1440 hppanbsd-nat.c hppanbsd-tdep.c \
1441 i386-tdep.c i386-linux-nat.c \
1442 i386v4-nat.c i386-cygwin-tdep.c \
1443 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1444 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1446 i386-darwin-tdep.c i386-darwin-nat.c \
1448 i386-linux-tdep.c i386-nat.c \
1449 i386-sol2-nat.c i386-sol2-tdep.c \
1450 i386gnu-nat.c i386gnu-tdep.c \
1451 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1452 inf-ptrace.c inf-ttrace.c \
1461 m32r-linux-nat.c m32r-linux-tdep.c \
1463 m68kbsd-nat.c m68kbsd-tdep.c \
1464 m68klinux-nat.c m68klinux-tdep.c \
1465 m88k-tdep.c m88kbsd-nat.c \
1466 microblaze-tdep.c microblaze-linux-tdep.c \
1468 mips-linux-nat.c mips-linux-tdep.c \
1471 mipsnbsd-nat.c mipsnbsd-tdep.c \
1472 mips64obsd-nat.c mips64obsd-tdep.c \
1473 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1476 somread.c solib-som.c \
1478 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1479 ppcnbsd-nat.c ppcnbsd-tdep.c \
1480 ppcobsd-nat.c ppcobsd-tdep.c \
1482 remote-m32r-sdi.c remote-mips.c \
1485 rs6000-nat.c rs6000-tdep.c \
1486 s390-tdep.c s390-nat.c \
1488 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1489 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1491 solib-irix.c solib-svr4.c solib-sunos.c \
1492 sparc-linux-nat.c sparc-linux-tdep.c \
1493 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1494 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1495 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1496 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1497 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1498 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1500 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1501 windows-nat.c windows-tdep.c \
1502 xcoffread.c xcoffsolib.c \
1504 xtensa-tdep.c xtensa-config.c \
1505 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1507 # Some files need explicit build rules (due to -Werror problems) or due
1508 # to sub-directory fun 'n' games.
1510 hpux-thread.o
: $(srcdir)/hpux-thread.c
1511 $(COMPILE
) -I
$(srcdir)/osf-share
-I
$(srcdir)/osf-share
/HP800 \
1512 -I
/usr
/include/dce
$(srcdir)/hpux-thread.c
1515 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1516 main.o
: $(srcdir)/main.c
1517 $(COMPILE
) $(TARGET_SYSTEM_ROOT_DEFINE
) -DBINDIR
=\"$(bindir)\" $(srcdir)/main.c
1520 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1521 # errors. It turns out that that is the least of monitor.c's
1522 # problems. The function print_vsprintf appears to be using
1523 # va_arg(long) to extract CORE_ADDR parameters - something that
1524 # definitly will not work. "monitor.c" needs to be rewritten so that
1525 # it doesn't use format strings and instead uses callbacks.
1526 monitor.o
: $(srcdir)/monitor.c
1527 $(COMPILE.pre
) $(INTERNAL_WARN_CFLAGS
) $(COMPILE.post
) $(srcdir)/monitor.c
1530 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1531 # checks format strings.
1532 printcmd.o
: $(srcdir)/printcmd.c
1533 $(COMPILE.pre
) $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1534 $(GDB_WERROR_CFLAGS
) $(COMPILE.post
) $(srcdir)/printcmd.c
1537 # Message files. Based on code in gcc/Makefile.in.
1539 # Rules for generating translated message descriptions. Disabled by
1540 # autoconf if the tools are not available.
1542 .SUFFIXES
: .po .gmo .pox .pot
1543 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1547 # This notation should be acceptable to all Make implementations used
1548 # by people who are interested in updating .po files.
1549 update-po
: $(CATALOGS
:.gmo
=.pox
)
1551 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1554 -test -d po || mkdir po
1555 $(GMSGFMT
) --statistics
-o
$@
$<
1557 # The new .po has to be gone over by hand, so we deposit it into
1558 # build/po with a different extension. If build/po/$(PACKAGE).pot
1559 # exists, use it (it was just created), else use the one in srcdir.
1561 -test -d po || mkdir po
1562 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1563 then echo po/$(PACKAGE).pot; \
1564 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1566 # This rule has to look for .gmo modules in both srcdir and the cwd,
1567 # and has to check that we actually have a catalog for each language,
1568 # in case they weren't built or included with the distribution.
1570 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1571 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1572 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1573 if
[ -f
$$cat ]; then
:; \
1574 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1577 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1578 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1579 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1580 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1581 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1584 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1585 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1586 if
[ -f
$$cat ]; then
:; \
1587 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1590 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1591 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1593 # Delete po/*.gmo only if we are not building in the source directory.
1595 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1597 # Rule for regenerating the message template (gdb.pot). Instead of
1598 # forcing everyone to edit POTFILES.in, which proved impractical, this
1599 # rule has no dependencies and always regenerates gdb.pot. This is
1600 # relatively harmless since the .po files do not directly depend on
1601 # it. The .pot file is left in the build directory. Since GDB's
1602 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1603 # files) force this rule.
1604 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1605 po
/$(PACKAGE
).pot
: force
1606 -test -d po || mkdir po
1607 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1611 # YACC/LEX dependencies
1613 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1614 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1615 # said LANG-exp.c rather than ./c-exp.c some makes would
1616 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1617 # decls for malloc/realloc/free which conflict with everything else.
1618 # Strictly speaking c-exp.c should therefore depend on
1619 # Makefile.in, but that was a pretty big annoyance.
1623 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@.tmp
-- $(YACC
) $(YFLAGS
)
1624 -sed
-e
'/extern.*malloc/d' \
1625 -e
'/extern.*realloc/d' \
1626 -e
'/extern.*free/d' \
1627 -e
'/include.*malloc.h/d' \
1628 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1629 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1630 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1631 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1632 -e
'/^#line.*y.tab.c/d' \
1637 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1638 $(FLEX
) -o
$@
$< && \
1640 sed
-e
'/extern.*malloc/d' \
1641 -e
'/extern.*realloc/d' \
1642 -e
'/extern.*free/d' \
1643 -e
'/include.*malloc.h/d' \
1644 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1645 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1646 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1647 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1648 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1652 elif
[ -f
$@
]; then \
1653 echo
"Warning: $*.c older than $*.l and flex not available."; \
1655 echo
"$@ missing and flex not available."; \
1659 .PRECIOUS
: ada-exp.c ada-lex.c
1664 .PRECIOUS
: objc-exp.c
1669 xml-builtin.c
: stamp-xml
; @true
1670 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1671 rm -f xml-builtin.tmp
1673 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1674 xml-builtin.tmp
$(XMLFILES
)
1675 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1676 echo stamp
> stamp-xml
1678 .PRECIOUS
: xml-builtin.c
1681 # gdb/cli/ dependencies
1683 # Need to explicitly specify the compile rule as make will do nothing
1684 # or try to compile the object file into the sub-directory.
1686 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1687 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1690 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1691 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1694 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1695 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1698 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1699 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1702 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1703 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1706 cli-script.o
: $(srcdir)/cli
/cli-script.c
1707 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1710 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1711 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1716 # GDBTK sub-directory
1718 # Need to explicitly specify the compile rule as make will do nothing
1719 # or try to compile the object file into the mi directory.
1721 all-gdbtk
: insight
$(EXEEXT
)
1724 transformed_name
=`t='$(program_transform_name)'; \
1725 echo insight | sed -e $$t` ; \
1726 if
test "x$$transformed_name" = x
; then \
1727 transformed_name
=insight
; \
1731 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1732 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1733 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1734 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1735 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1736 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1737 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1738 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1739 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1740 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1741 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1742 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1743 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1744 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1745 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1746 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1747 cd
$(srcdir)/gdbtk
/library
; \
1748 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1750 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1754 transformed_name
=`t='$(program_transform_name)'; \
1755 echo insight | sed -e $$t` ; \
1756 if
test "x$$transformed_name" = x
; then \
1757 transformed_name
=insight
; \
1761 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1762 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1765 rm -f insight
$(EXEEXT
)
1767 # Removing the old gdb first works better if it is running, at least on SunOS.
1768 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1769 $(CDEPS
) $(TDEPLIBS
)
1770 rm -f insight
$(EXEEXT
)
1771 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1772 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1773 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1775 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1776 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1778 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1779 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1781 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1782 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1784 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1785 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1788 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1789 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1792 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1793 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1796 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1797 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1800 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1801 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1804 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1805 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1808 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1809 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1812 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1813 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1816 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1817 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1820 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1821 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1826 # gdb/mi/ dependencies
1828 # Need to explicitly specify the compile rule as make will do nothing
1829 # or try to compile the object file into the sub-directory.
1831 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1832 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1835 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1836 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1839 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1840 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1843 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1844 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1847 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1848 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1851 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1852 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1855 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1856 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1859 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1860 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1863 mi-console.o
: $(srcdir)/mi
/mi-console.c
1864 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1867 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1868 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1871 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1872 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1875 mi-main.o
: $(srcdir)/mi
/mi-main.c
1876 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1879 mi-out.o
: $(srcdir)/mi
/mi-out.c
1880 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1883 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1884 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1887 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1888 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1891 mi-common.o
: $(srcdir)/mi
/mi-common.c
1892 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1896 # gdb/common/ dependencies
1898 # Need to explicitly specify the compile rule as make will do nothing
1899 # or try to compile the object file into the sub-directory.
1901 signals.o
: $(srcdir)/common
/signals.c
1902 $(COMPILE
) $(srcdir)/common
/signals.c
1906 # gdb/tui/ dependencies
1908 # Need to explicitly specify the compile rule as make will do nothing
1909 # or try to compile the object file into the sub-directory.
1911 tui.o
: $(srcdir)/tui
/tui.c
1912 $(COMPILE
) $(srcdir)/tui
/tui.c
1915 tui-command.o
: $(srcdir)/tui
/tui-command.c
1916 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1919 tui-data.o
: $(srcdir)/tui
/tui-data.c
1920 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1923 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1924 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1927 tui-file.o
: $(srcdir)/tui
/tui-file.c
1928 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1931 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1932 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1935 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1936 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1939 tui-io.o
: $(srcdir)/tui
/tui-io.c
1940 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1943 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1944 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1947 tui-main.o
: $(srcdir)/tui
/tui-main.c
1948 $(COMPILE
) $(srcdir)/tui
/tui-main.c
1951 tui-out.o
: $(srcdir)/tui
/tui-out.c
1952 $(COMPILE
) $(srcdir)/tui
/tui-out.c
1955 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
1956 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
1959 tui-source.o
: $(srcdir)/tui
/tui-source.c
1960 $(COMPILE
) $(srcdir)/tui
/tui-source.c
1963 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
1964 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
1967 tui-win.o
: $(srcdir)/tui
/tui-win.c
1968 $(COMPILE
) $(srcdir)/tui
/tui-win.c
1971 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
1972 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
1975 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
1976 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
1979 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
1980 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
1984 # gdb/python/ dependencies
1986 # Need to explicitly specify the compile rule as make will do nothing
1987 # or try to compile the object file into the sub-directory.
1989 # Flags needed to compile Python code
1990 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
1992 python.o
: $(srcdir)/python
/python.c
1993 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
1996 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
1997 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2000 py-block.o
: $(srcdir)/python
/py-block.c
2001 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2004 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2005 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2008 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2009 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2012 py-frame.o
: $(srcdir)/python
/py-frame.c
2013 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2016 py-function.o
: $(srcdir)/python
/py-function.c
2017 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2020 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2021 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2024 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2025 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2028 py-param.o
: $(srcdir)/python
/py-param.c
2029 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2032 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2033 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2036 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2037 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2040 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2041 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2044 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2045 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2048 py-type.o
: $(srcdir)/python
/py-type.c
2049 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2052 py-utils.o
: $(srcdir)/python
/py-utils.c
2053 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2056 py-value.o
: $(srcdir)/python
/py-value.c
2057 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2061 # Dependency tracking. Most of this is conditional on GNU Make being
2062 # found by configure; if GNU Make is not found, we fall back to a
2066 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2067 # Note that we put the dependencies into a .Tpo file, then move them
2068 # into place if the compile succeeds. We need this because gcc does
2069 # not atomically write the dependency output file.
2070 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2071 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2072 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2073 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2075 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2076 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2077 # depcomp handles atomicity for us, so we don't need a postcompile
2079 @GMAKE_TRUE@
override POSTCOMPILE
=
2082 # A list of all the objects we might care about in this build, for
2083 # dependency tracking.
2084 all_object_files
= gdb.o tui-main.o
$(LIBGDB_OBS
) gdbtk-main.o \
2085 test-cp-name-parser.o
2087 # Ensure that generated files are created early. Use order-only
2088 # dependencies if available. They require GNU make 3.80 or newer,
2089 # and the .VARIABLES variable was introduced at the same time.
2090 @GMAKE_TRUE@
ifdef .VARIABLES
2091 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2093 $(all_object_files
) : $(generated_files
)
2097 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2099 ### end of the gdb Makefile.in.