1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
3 # Free Software Foundation, Inc.
5 # This file is part of GDB.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program; if not, write to the Free Software
19 # Foundation, Inc., 51 Franklin Street, Fifth Floor,
20 # Boston, MA 02110-1301, USA.
23 exec_prefix = @
exec_prefix@
25 host_alias
= @host_alias@
26 target_alias
= @target_alias@
27 program_transform_name
= @program_transform_name@
30 tooldir
= $(libdir)/$(target_alias
)
33 localedir
= @localedir@
35 man1dir = $(mandir)/man1
36 man2dir = $(mandir)/man2
37 man3dir = $(mandir)/man3
38 man4dir = $(mandir)/man4
39 man5dir = $(mandir)/man5
40 man6dir = $(mandir)/man6
41 man7dir = $(mandir)/man7
42 man8dir = $(mandir)/man8
43 man9dir = $(mandir)/man9
45 pdfdir
= $(prefix)/share
/doc
/gdb
46 htmldir
= $(prefix)/html
47 includedir = @
includedir@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_DATA
= @INSTALL_DATA@
79 # If you are compiling with GCC, make sure that either 1) You have the
80 # fixed include files where GCC can reach them, or 2) You use the
81 # -traditional flag. Otherwise the ioctl calls in inflow.c
82 # will be incorrectly compiled. The "fixincludes" script in the gcc
83 # distribution will fix your include files up.
86 # Dependency tracking information.
89 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
91 # Note that these are overridden by GNU make-specific code below if
92 # GNU make is used. The overrides implement dependency tracking.
94 COMPILE.post
= -c
-o
$@
95 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
98 # Directory containing source files.
104 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
105 # not defined, but ada-lex.c is present, compilation will continue,
106 # possibly with a warning.
109 YLWRAP
= $(srcdir)/..
/ylwrap
111 # where to find makeinfo, preferably one designed for texinfo-2
114 # Contrary to documentation, the current directory is not
115 # searched by texi2html, so specify it explicitly.
118 MAKEHTMLFLAGS
= -menu
-split_chapter
-I .
120 # Set this up with gcc if you have gnu ld and the loader will print out
121 # line numbers for undefined references.
125 # Where is our "include" directory? Typically $(srcdir)/../include.
126 # This is essentially the header file directory for the library
127 # routines in libiberty.
128 INCLUDE_DIR
= $(srcdir)/..
/include
129 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
131 # Where is the "-liberty" library? Typically in ../libiberty.
132 LIBIBERTY
= ..
/libiberty
/libiberty.a
134 # Where is the BFD library? Typically in ../bfd.
136 BFD
= $(BFD_DIR
)/libbfd.a
137 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
138 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
140 # Where is the decnumber library? Typically in ../libdecnumber.
141 LIBDECNUMBER_DIR
= ..
/libdecnumber
142 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
143 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
144 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
146 # Where is the READLINE library? Typically in ../readline.
147 READLINE_DIR
= ..
/readline
148 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
149 READLINE
= @READLINE@
150 READLINE_DEPS
= @READLINE_DEPS@
151 READLINE_CFLAGS
= @READLINE_CFLAGS@
153 # Where is expat? This will be empty if expat was not available.
154 LIBEXPAT
= @LIBEXPAT@
156 WARN_CFLAGS
= @WARN_CFLAGS@
157 WERROR_CFLAGS
= @WERROR_CFLAGS@
158 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
159 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
161 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
163 # Where is the INTL library? Typically in ../intl.
165 INTL_DEPS
= @LIBINTL_DEP@
166 INTL_CFLAGS
= @INCINTL@
168 # Where is the ICONV library? This can be empty if libc has iconv.
169 LIBICONV
= @LIBICONV@
171 # Did the user give us a --with-sysroot option?
172 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
173 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
175 # Helper code from gnulib.
176 LIBGNU
= gnulib
/libgnu.a
177 INCGNU
= -I
$(srcdir)/gnulib
-Ignulib
179 # Generated headers in the gnulib directory. These must be listed
180 # so that they are generated before other files are compiled.
181 GNULIB_H
= gnulib
/string.h @GNULIB_STDINT_H@
184 # CLI sub directory definitons
188 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o cli-utils.o \
193 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
202 # MI sub directory definitons
205 mi-out.o mi-console.o \
206 mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
207 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
209 mi-main.o mi-parse.o mi-getopt.o mi-common.o
211 mi
/mi-out.c mi
/mi-console.c \
212 mi
/mi-cmds.c mi
/mi-cmd-env.c \
213 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
214 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
215 mi
/mi-cmd-target.c mi
/mi-interp.c \
216 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c mi
/mi-common.c
223 # TUI sub directory definitions
226 # Name of the TUI program
261 tui
/tui-wingeneral.c \
262 tui
/tui-winsource.c \
270 # python sub directory definitons
272 SUBDIR_PYTHON_OBS
= \
276 SUBDIR_PYTHON_SRCS
= \
278 python
/python-utils.c \
279 python
/python-value.c
281 SUBDIR_PYTHON_LDFLAGS
=
282 SUBDIR_PYTHON_CFLAGS
=
285 # Opcodes currently live in one of two places. Either they are in the
286 # opcode library, typically ../opcodes, or they are in a header file
288 # Where is the "-lopcodes" library, with (some of) the opcode tables and
290 OPCODES_DIR
= ..
/opcodes
291 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
292 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
293 # Where are the other opcode tables which only have header file
295 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
296 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
)
298 # The simulator is usually nonexistent; targets that include one
299 # should set this to list all the .o or .a files to be linked in.
302 WIN32LIBS
= @WIN32LIBS@
304 # Tcl et al cflags and libraries
306 TCL_CFLAGS
= @TCL_INCLUDE@
307 GDBTKLIBS
= @GDBTKLIBS@
308 # Extra flags that the GDBTK files need:
309 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
312 TK_CFLAGS
= @TK_INCLUDE@
314 X11_CFLAGS
= @TK_XINCLUDES@
318 WIN32LDAPP
= @WIN32LDAPP@
321 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
322 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
324 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
326 # The version of gdbtk we're building. This should be kept
327 # in sync with GDBTK_VERSION and friends in gdbtk.h.
329 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
331 # Gdbtk requires an absolute path to the source directory or
332 # the testsuite won't run properly.
333 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
336 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
337 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
338 SUBDIR_GDBTK_SRCS
= \
339 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
340 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
341 gdbtk
/generic
/gdbtk-interp.c \
342 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
343 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
344 gdbtk
/generic
/gdbtk-main.c
345 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
346 SUBDIR_GDBTK_LDFLAGS
=
347 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
349 CONFIG_OBS
= @CONFIG_OBS@
350 CONFIG_SRCS
= @CONFIG_SRCS@
351 CONFIG_DEPS
= @CONFIG_DEPS@
352 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
353 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
354 CONFIG_ALL
= @CONFIG_ALL@
355 CONFIG_CLEAN
= @CONFIG_CLEAN@
356 CONFIG_INSTALL
= @CONFIG_INSTALL@
357 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
359 # -I. for config files.
360 # -I$(srcdir) for gdb internal headers.
361 # -I$(srcdir)/config for more generic config files.
363 # It is also possible that you will need to add -I/usr/include/sys if
364 # your system doesn't have fcntl.h in /usr/include (which is where it
365 # should be according to Posix).
367 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
369 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
370 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
372 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
374 # CFLAGS is specifically reserved for setting from the command line
375 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
378 # Set by configure, for e.g. expat.
379 INTERNAL_CPPFLAGS
= @CPPFLAGS@
381 # Need to pass this to testsuite for "make check". Probably should be
382 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
383 # so "make check" has the same result no matter where it is run.
386 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
387 INTERNAL_CFLAGS_BASE
= \
388 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
389 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
390 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
391 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
392 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
393 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
395 # LDFLAGS is specifically reserved for setting from the command line
399 # Profiling options need to go here to work.
400 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
401 # and have it work; that's why CFLAGS is here.
402 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
403 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
405 # If your system is missing alloca(), or, more likely, it's there but
406 # it doesn't work, then refer to libiberty.
408 # Libraries and corresponding dependencies for compiling gdb.
409 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
410 # LIBIBERTY appears twice on purpose.
411 # If you have the Cygnus libraries installed,
412 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
413 INSTALLED_LIBS
=-lbfd
-lreadline
-lopcodes
-liberty
-ldecnumber \
414 $(XM_CLIBS
) $(TM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
415 -lintl
-liberty
$(LIBGNU
)
416 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
417 $(XM_CLIBS
) $(TM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
418 $(LIBICONV
) $(LIBEXPAT
) \
419 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
420 CDEPS
= $(XM_CDEPS
) $(TM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
421 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
423 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
424 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
429 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
430 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
436 # XML files to build in to GDB.
437 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
438 $(srcdir)/features
/library-list.dtd
440 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
441 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
442 # etc., then there will be (as part of the C library or perhaps as
443 # part of libiberty) a POSIX interface. But at least for now the
444 # host-dependent makefile fragment might need to use something else
446 SER_HARDWIRE
= @SER_HARDWIRE@
448 # The `remote' debugging target is supported for most architectures,
449 # but not all (e.g. 960)
450 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
452 # This is remote-sim.o if a simulator is to be linked in.
455 # Target-dependent object files.
456 TARGET_OBS
= @TARGET_OBS@
458 # All target-dependent objects files that require 64-bit CORE_ADDR
459 # (used with --enable-targets=all --enable-64-bit-bfd).
460 ALL_64_TARGET_OBS
= \
461 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
462 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
463 amd64fbsd-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o amd64obsd-tdep.o \
464 amd64-sol2-tdep.o amd64-tdep.o \
465 ia64-linux-tdep.o ia64-tdep.o \
467 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
468 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
470 # All other target-dependent objects files (used with --enable-targets=all).
472 armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
473 arm-tdep.o arm-wince-tdep.o \
476 frv-linux-tdep.o frv-tdep.o \
478 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
479 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
480 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
481 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
482 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
486 m32r-linux-tdep.o m32r-tdep.o \
488 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
491 mips-irix-tdep.o mips-linux-tdep.o \
492 mipsnbsd-tdep.o mips-tdep.o \
493 mn10300-linux-tdep.o mn10300-tdep.o \
496 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
497 rs6000-aix-tdep.o rs6000-tdep.o \
500 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
501 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
502 sparc-sol2-tdep.o sparc-tdep.o \
505 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
507 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
510 nbsd-tdep.o obsd-tdep.o \
512 solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
513 solib-som.o solib-pa64.o \
514 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
521 # Host-dependent makefile fragment comes in here.
523 # End of host-dependent makefile fragment
527 "exec_prefix=$(exec_prefix)" \
528 "infodir=$(infodir)" \
532 "datadir=$(datadir)" \
533 "includedir=$(includedir)" \
534 "against=$(against)" \
535 "DESTDIR=$(DESTDIR)" \
537 "AR_FLAGS=$(AR_FLAGS)" \
541 "CXXFLAGS=$(CXXFLAGS)" \
542 "DLLTOOL=$(DLLTOOL)" \
543 "LDFLAGS=$(LDFLAGS)" \
545 "MAKEINFO=$(MAKEINFO)" \
546 "MAKEHTML=$(MAKEHTML)" \
547 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
548 "INSTALL=$(INSTALL)" \
549 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
550 "INSTALL_DATA=$(INSTALL_DATA)" \
551 "RUNTEST=$(RUNTEST)" \
552 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
554 # Flags that we pass when building the testsuite.
556 # empty for native, $(target_alias)/ for cross
557 target_subdir
= @target_subdir@
560 if [ -f $${rootme}/../gcc/xgcc ] ; then \
561 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
562 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
564 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
567 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
570 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
576 if [ -f $${rootme}/../gcc/xgcc ] ; then \
577 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
578 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
580 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
583 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
586 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
590 # The use of $$(x_FOR_TARGET) reduces the command line length by not
591 # duplicating the lengthy definition.
592 TARGET_FLAGS_TO_PASS
= \
594 "exec_prefix=$(exec_prefix)" \
595 "against=$(against)" \
596 'CC=$$(CC_FOR_TARGET)' \
597 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
599 'CXX=$$(CXX_FOR_TARGET)' \
600 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
601 "CXXFLAGS=$(CXXFLAGS)" \
602 "INSTALL=$(INSTALL)" \
603 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
604 "INSTALL_DATA=$(INSTALL_DATA)" \
605 "MAKEINFO=$(MAKEINFO)" \
606 "MAKEHTML=$(MAKEHTML)" \
607 "RUNTEST=$(RUNTEST)" \
608 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
610 # All source files that go into linking GDB.
611 # Links made at configuration time should not be specified here, since
612 # SFILES is used in building the distribution archive.
614 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c \
616 auxv.c ax-general.c ax-gdb.c \
619 block.c blockframe.c breakpoint.c buildsym.c \
620 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
621 charset.c cli-out.c coffread.c coff-pe-read.c \
622 complaints.c completer.c corefile.c \
623 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
625 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
626 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
627 elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \
628 f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
629 frame.c frame-base.c frame-unwind.c \
630 gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
633 infcmd.c inflow.c infrun.c \
635 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
636 language.c linespec.c \
637 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
638 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
639 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
640 objc-exp.y objc-lang.c \
641 objfiles.c osabi.c observer.c \
642 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
644 regcache.c reggroups.c remote.c remote-fileio.c \
645 scm-exp.c scm-lang.c scm-valprint.c \
647 serial.c ser-base.c ser-unix.c \
648 solib.c solib-null.c source.c \
649 stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
651 target.c target-descriptions.c target-memory.c \
652 thread.c top.c tracepoint.c \
656 ui-out.c utils.c ui-file.h ui-file.c \
658 valarith.c valops.c valprint.c value.c varobj.c vec.c \
660 xml-tdesc.c xml-support.c \
663 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
665 # Header files that need to have srcdir added. Note that in the cases
666 # where we use a macro like $(gdbcmd_h), things are carefully arranged
667 # so that each .h file is listed exactly once (M-x tags-search works
668 # wrong if TAGS has files twice). Because this is tricky to get
669 # right, it is probably easiest just to list .h files here directly.
671 HFILES_NO_SRCDIR
= osf-share
/cma_debug_client.h \
672 osf-share
/HP800
/cma_thread_io.h osf-share
/cma_sequence.h \
673 osf-share
/cma_mutex.h osf-share
/cma_semaphore_defs.h \
674 osf-share
/cma_list.h osf-share
/cma_handle.h osf-share
/cma_stack.h \
675 osf-share
/cma_util.h osf-share
/RIOS
/cma_thread_io.h \
676 osf-share
/cma_errors.h osf-share
/cma_tcb_defs.h osf-share
/cma_attr.h \
677 osf-share
/cma_stack_int.h osf-share
/cma_init.h \
678 osf-share
/cma_deb_core.h osf-share
/AT386
/cma_thread_io.h \
679 osf-share
/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
680 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h gnu-v2-abi.h \
681 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
682 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
683 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
684 c-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
685 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h cli
/cli-dump.h \
686 cli
/cli-script.h macrotab.h symtab.h version.h gnulib
/wchar.in.h \
687 gnulib
/string.in.h gnulib
/str-two-way.h gnulib
/extra
/link-warning.h \
688 gnulib
/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver
/win32-low.h \
689 gdbserver
/i387-fp.h gdbserver
/server.h gdbserver
/terminal.h \
690 gdbserver
/mem-break.h gdbserver
/wincecompat.h gdbserver
/target.h \
691 gdbserver
/linux-low.h gdbserver
/gdb_proc_service.h \
692 gdbserver
/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
693 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
694 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
695 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
696 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
697 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
698 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
699 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
700 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
701 solib-target.h shnbsd-tdep.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
702 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
703 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
704 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
705 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
706 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
707 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
708 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
709 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
710 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
711 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
712 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
713 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
714 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
715 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
716 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
717 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
718 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
719 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
720 language.h i386-cygwin-tdep.h nbsd-tdep.h wrapper.h solib-svr4.h \
721 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
722 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
723 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-cygwin.h \
724 config
/i386
/nm-linux64.h config
/i386
/nm-i386gnu.h \
725 config
/i386
/nm-fbsd.h config
/i386
/nm-i386sol2.h config
/i386
/nm-linux.h \
726 config
/i386
/nm-i386.h config
/i386
/nm-go32.h config
/nm-nto.h \
727 config
/sparc
/nm-sol2.h config
/nm-linux.h config
/mips
/nm-irix5.h \
728 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
729 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
730 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
731 sentinel-frame.h bcache.h symfile.h
733 # Header files that already have srcdir in them, or which are in objdir.
735 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h
738 # GDB "info" files, which should be included in their entirety
739 INFOFILES
= gdb.
info*
741 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
743 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
744 # default their values the way we do for SER_HARDWIRE; in the future
745 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
746 # variables analogous to SER_HARDWIRE which get defaulted in this
749 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
750 $(REMOTE_OBS
) $(SIM_OBS
)
752 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
753 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
754 # and it's more useful to see it in the .y file.
755 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
757 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
759 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
765 blockframe.o breakpoint.o findvar.o regcache.o \
766 charset.o disasm.o dummy-frame.o dfp.o \
767 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
768 block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
771 expprint.o environ.o stack.o thread.o \
776 macrotab.o macrocmd.o macroexp.o macroscope.o \
777 event-loop.o event-top.o inf-loop.o completer.o \
778 gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
779 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
783 exec.o bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
784 dbxread.o coffread.o coff-pe-read.o \
785 dwarf2read.o mipsread.o stabsread.o corefile.o \
786 dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
787 ada-lang.o c-lang.o f-lang.o objc-lang.o \
789 varobj.o vec.o wrapper.o \
790 jv-lang.o jv-valprint.o jv-typeprint.o \
791 m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
792 scm-exp.o scm-lang.o scm-valprint.o \
794 complaints.o typeprint.o \
795 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
796 ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
797 serial.o mdebugread.o top.o utils.o \
800 frame.o frame-unwind.o doublest.o \
802 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
804 reggroups.o regset.o \
807 solib.o solib-null.o \
808 prologue-value.o memory-map.o xml-support.o \
809 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
815 CLEANDIRS
= $(SUBDIRS
) gnulib
817 # For now, shortcut the "configure GDB for fewer languages" stuff.
824 f-exp.c m2-exp.c p-exp.c
830 f-exp.o m2-exp.o p-exp.o
832 # Things which need to be built when making a distribution.
834 DISTSTUFF
= $(YYFILES
)
837 # All generated files which can be included by another file.
838 generated_files
= config.h observer.h observer.inc ada-lex.c \
839 $(GNULIB_H
) $(NAT_GENERATED_FILES
)
845 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
846 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
848 all-tui
: $(TUI
)$(EXEEXT
)
852 # The check target can not use subdir_do, because subdir_do does not
853 # use TARGET_FLAGS_TO_PASS.
855 @if
[ -f testsuite
/Makefile
]; then \
856 rootme
=`pwd`; export rootme
; \
857 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
859 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
862 # The idea is to parallelize testing of multilibs, for example:
863 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
864 # will run 3 concurrent sessions of check, eventually testing all 10
865 # combinations. GNU make is required for the % pattern to work, as is
866 # a shell that expands alternations within braces. If GNU make is not
867 # used, this rule will harmlessly fail to match.
869 @if
[ -f testsuite
/config.status
]; then \
870 rootme
=`pwd`; export rootme
; \
871 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
872 target
=`echo "$@" | sed 's,//.*,,'`; \
873 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
874 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
875 testdir
=testsuite.
$$vardots; \
876 if
[ ! -f
$$testdir/Makefile
]; then \
877 (cd testsuite
&& find .
-name config.status
) | \
878 sed s
,/config.status
$$,, |
sort | while read subdir
; do \
879 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir/$$subdir && \
880 (cd
$$testdir/$$subdir && \
881 $(SHELL
) $$rootme/testsuite
/$$subdir/config.status \
883 $(SHELL
) .
/config.status
); done
; \
884 else :; fi
&& cd
$$testdir && \
885 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
886 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
890 info install-info clean-info
dvi pdf install-pdf html install-html
: force
891 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
894 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
895 pack gdb.t
; rm -f gdb.t
898 # Traditionally "install" depends on "all". But it may be useful
899 # not to; for example, if the user has made some trivial change to a
900 # source file and doesn't care about rebuilding or just wants to save the
901 # time it takes for make to check that all is up to date.
902 # install-only is intended to address that need.
903 install: all install-only
904 install-only
: $(CONFIG_INSTALL
)
905 transformed_name
=`t='$(program_transform_name)'; \
906 echo gdb | sed -e "$$t"` ; \
907 if
test "x$$transformed_name" = x
; then \
908 transformed_name
=gdb
; \
912 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
913 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
914 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
915 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
916 $(DESTDIR
)$(man1dir) ; \
917 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
918 $(DESTDIR
)$(man1dir)/$$transformed_name.1
919 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
922 transformed_name
=`t='$(program_transform_name)'; \
923 echo $(TUI) | sed -e "$$t"` ; \
924 if
test "x$$transformed_name" = x
; then \
925 transformed_name
=$(TUI
) ; \
929 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
930 $(INSTALL_PROGRAM
) $(TUI
)$(EXEEXT
) \
931 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
932 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
933 $(DESTDIR
)$(man1dir) ; \
934 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
935 $(DESTDIR
)$(man1dir)/$$transformed_name.1
938 uninstall: force $(CONFIG_UNINSTALL
)
939 transformed_name
=`t='$(program_transform_name)'; \
940 echo gdb | sed -e $$t` ; \
941 if
test "x$$transformed_name" = x
; then \
942 transformed_name
=gdb
; \
946 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
947 $(DESTDIR
)$(man1dir)/$$transformed_name.1
948 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
949 .PHONY
: uninstall-tui
951 transformed_name
=`t='$(program_transform_name)'; \
952 echo $(TUI) | sed -e $$t` ; \
953 if
test "x$$transformed_name" = x
; then \
954 transformed_name
=$(TUI
) ; \
958 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
959 $(DESTDIR
)$(man1dir)/$$transformed_name.1
961 # The C++ name parser can be built standalone for testing.
962 test-cp-name-parser.o
: cp-name-parser.c
963 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
966 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
967 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
968 test-cp-name-parser.o
$(LIBIBERTY
)
970 # We do this by grepping through sources. If that turns out to be too slow,
971 # maybe we could just require every .o file to have an initialization routine
972 # of a given name (top.o -> _initialize_top, etc.).
974 # Formatting conventions: The name of the _initialize_* routines must start
975 # in column zero, and must not be inside #if.
977 # Note that the set of files with init functions might change, or the names
978 # of the functions might change, so this files needs to depend on all the
979 # object files that will be linked into gdb.
981 # FIXME: There is a problem with this approach - init.c may force
982 # unnecessary files to be linked in.
984 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
985 # the first call is to _initialize_gdbtypes (implemented by explicitly
986 # putting that function's name first in the init.l-tmp file). This is
987 # a hack to ensure that all the architecture dependant global
988 # builtin_type_* variables are initialized before anything else
989 # (per-architecture code is called in the same order that it is
990 # registered). The ``correct fix'' is to have all the builtin types
991 # made part of the architecture and initialize them on-demand (using
992 # gdbarch_data) just like everything else. The catch is that other
993 # modules still take the address of these builtin types forcing them
994 # to be variables, sigh!
996 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
997 # anchored on the first column and excludes the ``/'' character so
998 # that it doesn't add the $(srcdir) prefix to any file that already
999 # has an absolute path. It turns out that $(DEC)'s True64 make
1000 # automatically adds the $(srcdir) prefixes when it encounters files
1001 # in sub-directories such as cli/ and mi/.
1003 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1004 # duplicates. Files in the gdb/ directory can end up appearing in
1005 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1007 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1008 init.c
: $(INIT_FILES
)
1010 @
rm -f init.c-tmp init.l-tmp
1012 @echo gdbtypes
> init.l-tmp
1013 @
-LANG
=c
; export LANG
; \
1014 LC_ALL
=c
; export LC_ALL
; \
1015 echo
$(INIT_FILES
) | \
1018 -e
'/^gdbtypes.[co]$$/d' \
1019 -e
'/^init.[co]$$/d' \
1020 -e
'/xdr_ld.[co]$$/d' \
1021 -e
'/xdr_ptrace.[co]$$/d' \
1022 -e
'/xdr_rdb.[co]$$/d' \
1023 -e
'/udr.[co]$$/d' \
1024 -e
'/udip2soc.[co]$$/d' \
1025 -e
'/udi2go32.[co]$$/d' \
1026 -e
'/version.[co]$$/d' \
1027 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1028 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1029 -e
's/\.[co]$$/.c/' \
1030 -e
's,signals\.c,signals/signals\.c,' \
1031 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1033 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1038 * ) echo
$$f ; fs
="$$fs $$f";; \
1041 @echo
'/* Do not modify this file. */' >>init.c-tmp
1042 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1043 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1044 @echo
'#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
1045 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1046 @echo
'void' >>init.c-tmp
1047 @echo
'initialize_all_files (void)' >>init.c-tmp
1048 @echo
'{' >>init.c-tmp
1049 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1050 @echo
'}' >>init.c-tmp
1052 @mv init.c-tmp init.c
1056 # Removing the old gdb first works better if it is running, at least on SunOS.
1057 gdb
$(EXEEXT
): gdb.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1059 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1060 -o gdb
$(EXEEXT
) gdb.o libgdb.a \
1061 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1063 $(TUI
)$(EXEEXT
): tui-main.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1064 rm -f
$(TUI
)$(EXEEXT
)
1065 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1066 -o
$(TUI
)$(EXEEXT
) tui-main.o libgdb.a \
1067 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1069 # Convenience rule to handle recursion.
1070 $(LIBGNU
) $(GNULIB_H
): all-lib
1071 all-lib
: gnulib
/Makefile
1072 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=gnulib subdir_do
1075 # Create a library of the gdb object files and build GDB by linking
1078 # init.o is very important. It pulls in the rest of GDB.
1079 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1080 libgdb.a
: $(LIBGDB_OBS
)
1082 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1085 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1086 # on itself without copying the executable. So "make gdb1" will make
1087 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1088 # Removing gdb1 before the copy is the right thing if gdb1 is open
1089 # in another process.
1090 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1092 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1094 # Put the proper machine-specific files first, so M-. on a machine
1095 # specific routine gets the one for the correct machine. (FIXME: those
1096 # files go in twice; we should be removing them from the main list).
1098 # TAGS depends on all the files that go into it so you can rebuild TAGS
1099 # with `make TAGS' and not have to say `rm TAGS' first.
1101 TAGS
: $(DEPFILES
) $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1103 @etags
$(srcdir)/$(NAT_FILE
) \
1104 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1105 echo $(srcdir)/$$i ; \
1106 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1108 done) | sed -e 's/\.o$$/\.c/'` \
1109 `find $(srcdir)/config -name '*.h' -print`
1113 clean mostlyclean: $(CONFIG_CLEAN
)
1114 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1115 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1116 rm -f init.c version.c
1117 rm -f gdb
$(EXEEXT
) core make.log
1118 rm -f gdb
[0-9]$(EXEEXT
)
1119 rm -f test-cp-name-parser
$(EXEEXT
)
1120 rm -f xml-builtin.c stamp-xml
1124 rm -f
$(TUI
)$(EXEEXT
)
1126 # This used to depend on c-exp.c m2-exp.c TAGS
1127 # I believe this is wrong; the makefile standards for distclean just
1128 # describe removing files; the only sort of "re-create a distribution"
1129 # functionality described is if the distributed files are unmodified.
1130 # NB: While GDBSERVER might be configured on native systems, it isn't
1131 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1133 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1134 rm -f gdbserver
/config.status gdbserver
/config.log
1135 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1136 rm -f gdbserver
/Makefile gdbserver
/config.cache
1137 rm -f nm.h config.status config.h stamp-h .gdbinit
1138 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1139 rm -f config.log config.cache
1143 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1144 realclean: maintainer-clean
1146 local-maintainer-clean
:
1147 @echo
"This command is intended for maintainers to use;"
1148 @echo
"it deletes files that may require special tools to rebuild."
1151 ada-lex.c ada-exp.c \
1154 f-exp.c m2-exp.c p-exp.c
1155 rm -f TAGS
$(INFOFILES
)
1157 rm -f nm.h config.status
1159 do-maintainer-clean
:
1160 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1163 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1164 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1167 @for i in
$(DODIRS
); do \
1168 if
[ -f .
/$$i/Makefile
] ; then \
1170 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1171 else exit
1 ; fi
; \
1175 Makefile
: Makefile.in config.status @frags@
1176 # Regenerate the Makefile and the tm.h / nm.h links.
1177 CONFIG_FILES
="Makefile" \
1180 $(SHELL
) config.status
1182 gnulib
/Makefile
: gnulib
/Makefile.in gnulib
/Makefile.in config.status @frags@
1183 CONFIG_FILES
="gnulib/Makefile" \
1184 CONFIG_COMMANDS
="depfiles" \
1187 $(SHELL
) config.status
1189 config.h
: stamp-h
; @true
1190 stamp-h
: config.in config.status
1191 CONFIG_HEADERS
=config.h
:config.in \
1192 CONFIG_COMMANDS
="default depdir" \
1195 $(SHELL
) config.status
1197 config.status
: configure configure.tgt configure.host
1198 $(SHELL
) config.status
--recheck
1203 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1205 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1207 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1209 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1211 # GDB MANUAL: TeX dvi file
1213 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1215 # GDB MANUAL: info file
1217 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1219 # Make copying.c from COPYING
1220 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1221 awk
-f
$(srcdir)/copying.awk \
1222 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1223 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1225 version.c
: Makefile version.in
1226 rm -f version.c-tmp version.c
1227 echo
'#include "version.h"' >> version.c-tmp
1228 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1229 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1230 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1231 mv version.c-tmp version.c
1233 observer.h
: observer.sh doc
/observer.texi
1234 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1236 observer.inc
: observer.sh doc
/observer.texi
1237 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1240 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1241 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1243 gdb.cxref
: $(SFILES
)
1244 cxref
-I.
$(SFILES
) >gdb.cxref
1248 # GNU Make has an annoying habit of putting *all* the Makefile variables
1249 # into the environment, unless you include this target as a circumvention.
1250 # Rumor is that this will be fixed (and this target can be removed)
1254 # GNU Make 3.63 has a different problem: it keeps tacking command line
1255 # overrides onto the definition of $(MAKE). This variable setting
1261 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1262 alpha-tdep.c alpha-mdebug-tdep.c \
1263 alpha-linux-tdep.c alpha-osf1-tdep.c \
1264 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1265 amd64-nat.c amd64-tdep.c \
1266 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1267 amd64nbsd-nat.c amd64nbsd-tdep.c \
1268 amd64obsd-nat.c amd64obsd-tdep.c \
1269 amd64-linux-nat.c amd64-linux-tdep.c \
1271 arm-linux-nat.c arm-linux-tdep.c arm-tdep.c \
1272 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1274 bsd-uthread.c bsd-kvm.c \
1275 core-regset.c corelow.c \
1280 go32-nat.c h8300-tdep.c \
1281 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1282 hppa-linux-tdep.c hppa-linux-nat.c \
1283 hppabsd-nat.c hppabsd-tdep.c \
1285 hppanbsd-nat.c hppanbsd-tdep.c \
1286 i386-tdep.c i386-linux-nat.c \
1287 i386v4-nat.c i386-cygwin-tdep.c \
1288 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1289 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1292 i386-linux-tdep.c i386-nat.c \
1293 i386-sol2-nat.c i386-sol2-tdep.c \
1294 i386gnu-nat.c i386gnu-tdep.c \
1295 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1296 inf-ptrace.c inf-ttrace.c \
1302 m32r-linux-nat.c m32r-linux-tdep.c \
1304 m68kbsd-nat.c m68kbsd-tdep.c \
1305 m68klinux-nat.c m68klinux-tdep.c \
1306 m88k-tdep.c m88kbsd-nat.c \
1308 mips-linux-nat.c mips-linux-tdep.c \
1311 mipsnbsd-nat.c mipsnbsd-tdep.c \
1312 mips64obsd-nat.c mips64obsd-tdep.c \
1313 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1316 somread.c solib-som.c \
1318 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1319 ppcnbsd-nat.c ppcnbsd-tdep.c \
1320 ppcobsd-nat.c ppcobsd-tdep.c \
1322 remote-m32r-sdi.c remote-mips.c \
1325 rs6000-nat.c rs6000-tdep.c \
1326 s390-tdep.c s390-nat.c \
1328 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1329 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1331 solib-irix.c solib-svr4.c solib-sunos.c \
1333 sparc-linux-tdep.c sparc-nat.c sparc-sol2-nat.c sparc-sol2-tdep.c \
1334 sparc-tdep.c sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-linux-nat.c \
1335 sparc64-linux-tdep.c sparc64-nat.c sparc64-sol2-tdep.c \
1336 sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1337 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1338 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1339 spu-linux-nat.c spu-tdep.c \
1341 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1343 xcoffread.c xcoffsolib.c \
1345 xtensa-tdep.c xtensa-config.c \
1346 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1348 # Some files need explicit build rules (due to -Werror problems) or due
1349 # to sub-directory fun 'n' games.
1351 hpux-thread.o
: $(srcdir)/hpux-thread.c
1352 $(COMPILE
) -I
$(srcdir)/osf-share
-I
$(srcdir)/osf-share
/HP800 \
1353 -I
/usr
/include/dce
$(srcdir)/hpux-thread.c
1356 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1357 main.o
: $(srcdir)/main.c
1358 $(COMPILE
) $(TARGET_SYSTEM_ROOT_DEFINE
) -DBINDIR
=\"$(bindir)\" $(srcdir)/main.c
1361 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1362 # errors. It turns out that that is the least of monitor.c's
1363 # problems. The function print_vsprintf appears to be using
1364 # va_arg(long) to extract CORE_ADDR parameters - something that
1365 # definitly will not work. "monitor.c" needs to be rewritten so that
1366 # it doesn't use format strings and instead uses callbacks.
1367 monitor.o
: $(srcdir)/monitor.c
1368 $(COMPILE.pre
) $(INTERNAL_WARN_CFLAGS
) $(COMPILE.post
) $(srcdir)/monitor.c
1371 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1372 # checks format strings.
1373 printcmd.o
: $(srcdir)/printcmd.c
1374 $(COMPILE.pre
) $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1375 $(GDB_WERROR_CFLAGS
) $(COMPILE.post
) $(srcdir)/printcmd.c
1378 # Message files. Based on code in gcc/Makefile.in.
1380 # Rules for generating translated message descriptions. Disabled by
1381 # autoconf if the tools are not available.
1383 .SUFFIXES
: .po .gmo .pox .pot
1384 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1388 # This notation should be acceptable to all Make implementations used
1389 # by people who are interested in updating .po files.
1390 update-po
: $(CATALOGS
:.gmo
=.pox
)
1392 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1395 -test -d po || mkdir po
1396 $(GMSGFMT
) --statistics
-o
$@
$<
1398 # The new .po has to be gone over by hand, so we deposit it into
1399 # build/po with a different extension. If build/po/$(PACKAGE).pot
1400 # exists, use it (it was just created), else use the one in srcdir.
1402 -test -d po || mkdir po
1403 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1404 then echo po/$(PACKAGE).pot; \
1405 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1407 # This rule has to look for .gmo modules in both srcdir and the cwd,
1408 # and has to check that we actually have a catalog for each language,
1409 # in case they weren't built or included with the distribution.
1411 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1412 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1413 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1414 if
[ -f
$$cat ]; then
:; \
1415 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1418 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1419 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1420 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1421 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1422 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1425 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1426 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1427 if
[ -f
$$cat ]; then
:; \
1428 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1431 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1432 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1434 # Delete po/*.gmo only if we are not building in the source directory.
1436 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1438 # Rule for regenerating the message template (gdb.pot). Instead of
1439 # forcing everyone to edit POTFILES.in, which proved impractical, this
1440 # rule has no dependencies and always regenerates gdb.pot. This is
1441 # relatively harmless since the .po files do not directly depend on
1442 # it. The .pot file is left in the build directory. Since GDB's
1443 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1444 # files) force this rule.
1445 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1446 po
/$(PACKAGE
).pot
: force
1447 -test -d po || mkdir po
1448 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1452 # YACC/LEX dependencies
1454 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1455 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1456 # said LANG-exp.c rather than ./c-exp.c some makes would
1457 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1458 # decls for malloc/realloc/free which conflict with everything else.
1459 # Strictly speaking c-exp.c should therefore depend on
1460 # Makefile.in, but that was a pretty big annoyance.
1464 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@.tmp
-- $(YACC
) $(YFLAGS
)
1465 -sed
-e
'/extern.*malloc/d' \
1466 -e
'/extern.*realloc/d' \
1467 -e
'/extern.*free/d' \
1468 -e
'/include.*malloc.h/d' \
1469 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1470 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1471 -e
'/^#line.*y.tab.c/d' \
1476 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1477 $(FLEX
) -o
$@
$< && \
1479 sed
-e
'/extern.*malloc/d' \
1480 -e
'/extern.*realloc/d' \
1481 -e
'/extern.*free/d' \
1482 -e
'/include.*malloc.h/d' \
1483 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1484 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1485 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1489 elif
[ -f
$@
]; then \
1490 echo
"Warning: $*.c older than $*.l and flex not available."; \
1492 echo
"$@ missing and flex not available."; \
1496 .PRECIOUS
: ada-exp.c ada-lex.c
1501 .PRECIOUS
: objc-exp.c
1506 xml-builtin.c
: stamp-xml
; @true
1507 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1508 rm -f xml-builtin.tmp
1510 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1511 xml-builtin.tmp
$(XMLFILES
)
1512 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1513 echo stamp
> stamp-xml
1515 .PRECIOUS
: xml-builtin.c
1518 # gdb/cli/ dependencies
1520 # Need to explicitly specify the compile rule as make will do nothing
1521 # or try to compile the object file into the sub-directory.
1523 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1524 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1527 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1528 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1531 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1532 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1535 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1536 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1539 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1540 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1543 cli-script.o
: $(srcdir)/cli
/cli-script.c
1544 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1547 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1548 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1551 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1552 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1557 # GDBTK sub-directory
1559 # Need to explicitly specify the compile rule as make will do nothing
1560 # or try to compile the object file into the mi directory.
1562 all-gdbtk
: insight
$(EXEEXT
)
1565 transformed_name
=`t='$(program_transform_name)'; \
1566 echo insight | sed -e $$t` ; \
1567 if
test "x$$transformed_name" = x
; then \
1568 transformed_name
=insight
; \
1572 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1573 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1574 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1575 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1576 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1577 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1578 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1579 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1580 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1581 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1582 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1583 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1584 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1585 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1586 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1587 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1588 cd
$(srcdir)/gdbtk
/library
; \
1589 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1591 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1595 transformed_name
=`t='$(program_transform_name)'; \
1596 echo insight | sed -e $$t` ; \
1597 if
test "x$$transformed_name" = x
; then \
1598 transformed_name
=insight
; \
1602 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1603 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1606 rm -f insight
$(EXEEXT
)
1608 # Removing the old gdb first works better if it is running, at least on SunOS.
1609 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1610 $(CDEPS
) $(TDEPLIBS
)
1611 rm -f insight
$(EXEEXT
)
1612 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1613 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1614 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1616 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1617 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1619 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1620 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1622 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1623 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1625 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1626 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1629 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1630 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1633 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1634 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1637 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1638 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1641 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1642 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1645 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1646 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1649 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1650 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1653 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1654 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1657 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1658 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1661 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1662 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1667 # gdb/mi/ dependencies
1669 # Need to explicitly specify the compile rule as make will do nothing
1670 # or try to compile the object file into the sub-directory.
1672 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1673 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1676 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1677 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1680 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1681 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1684 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1685 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1688 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1689 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1692 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1693 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1696 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1697 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1700 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1701 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1704 mi-console.o
: $(srcdir)/mi
/mi-console.c
1705 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1708 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1709 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1712 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1713 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1716 mi-main.o
: $(srcdir)/mi
/mi-main.c
1717 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1720 mi-out.o
: $(srcdir)/mi
/mi-out.c
1721 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1724 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1725 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1728 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1729 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1732 mi-common.o
: $(srcdir)/mi
/mi-common.c
1733 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1737 # gdb/signals/ dependencies
1739 # Need to explicitly specify the compile rule as make will do nothing
1740 # or try to compile the object file into the sub-directory.
1742 signals.o
: $(srcdir)/signals
/signals.c
1743 $(COMPILE
) $(srcdir)/signals
/signals.c
1747 # gdb/tui/ dependencies
1749 # Need to explicitly specify the compile rule as make will do nothing
1750 # or try to compile the object file into the sub-directory.
1752 tui.o
: $(srcdir)/tui
/tui.c
1753 $(COMPILE
) $(srcdir)/tui
/tui.c
1756 tui-command.o
: $(srcdir)/tui
/tui-command.c
1757 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1760 tui-data.o
: $(srcdir)/tui
/tui-data.c
1761 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1764 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1765 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1768 tui-file.o
: $(srcdir)/tui
/tui-file.c
1769 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1772 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1773 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1776 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1777 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1780 tui-io.o
: $(srcdir)/tui
/tui-io.c
1781 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1784 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1785 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1788 tui-main.o
: $(srcdir)/tui
/tui-main.c
1789 $(COMPILE
) $(srcdir)/tui
/tui-main.c
1792 tui-out.o
: $(srcdir)/tui
/tui-out.c
1793 $(COMPILE
) $(srcdir)/tui
/tui-out.c
1796 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
1797 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
1800 tui-source.o
: $(srcdir)/tui
/tui-source.c
1801 $(COMPILE
) $(srcdir)/tui
/tui-source.c
1804 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
1805 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
1808 tui-win.o
: $(srcdir)/tui
/tui-win.c
1809 $(COMPILE
) $(srcdir)/tui
/tui-win.c
1812 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
1813 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
1816 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
1817 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
1820 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
1821 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
1825 # gdb/python/ dependencies
1827 # Need to explicitly specify the compile rule as make will do nothing
1828 # or try to compile the object file into the sub-directory.
1830 # Flags needed to compile Python code
1831 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
1833 python.o
: $(srcdir)/python
/python.c
1834 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
1837 python-utils.o
: $(srcdir)/python
/python-utils.c
1838 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python-utils.c
1841 python-value.o
: $(srcdir)/python
/python-value.c
1842 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python-value.c
1846 # Dependency tracking. Most of this is conditional on GNU Make being
1847 # found by configure; if GNU Make is not found, we fall back to a
1851 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
1852 # Note that we put the dependencies into a .Tpo file, then move them
1853 # into place if the compile succeeds. We need this because gcc does
1854 # not atomically write the dependency output file.
1855 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
1856 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
1857 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
1858 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
1860 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
1861 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
1862 # depcomp handles atomicity for us, so we don't need a postcompile
1864 @GMAKE_TRUE@
override POSTCOMPILE
=
1867 # A list of all the objects we might care about in this build, for
1868 # dependency tracking.
1869 all_object_files
= gdb.o tui-main.o
$(LIBGDB_OBS
) gdbtk-main.o \
1870 test-cp-name-parser.o
1872 # Ensure that generated files are created early. Use order-only
1873 # dependencies if available. They require GNU make 3.80 or newer,
1874 # and the .VARIABLES variable was introduced at the same time.
1875 @GMAKE_TRUE@
ifdef .VARIABLES
1876 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
1878 $(all_object_files
) : $(generated_files
)
1882 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
1884 ### end of the gdb Makefile.in.