1 # Copyright (C) 1989-2015 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 install_sh
= @install_sh@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
62 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
63 INSTALL_DATA
= @INSTALL_DATA@
82 # The name of the compiler to use.
85 # If you are compiling with GCC, make sure that either 1) You have the
86 # fixed include files where GCC can reach them, or 2) You use the
87 # -traditional flag. Otherwise the ioctl calls in inflow.c
88 # will be incorrectly compiled. The "fixincludes" script in the gcc
89 # distribution will fix your include files up.
93 # Dependency tracking information.
96 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
98 # Note that these are overridden by GNU make-specific code below if
99 # GNU make is used. The overrides implement dependency tracking.
100 COMPILE.pre
= $(COMPILER
)
101 COMPILE.post
= -c
-o
$@
102 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
105 # Directory containing source files.
108 top_srcdir
= @top_srcdir@
112 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
113 # not defined, but ada-lex.c is present, compilation will continue,
114 # possibly with a warning.
117 YLWRAP
= $(srcdir)/..
/ylwrap
119 # where to find makeinfo, preferably one designed for texinfo-2
120 MAKEINFO
= @MAKEINFO@
121 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
122 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
123 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
125 MAKEHTML
= $(MAKEINFO_CMD
) --html
128 # Set this up with gcc if you have gnu ld and the loader will print out
129 # line numbers for undefined references.
133 # Where is our "include" directory? Typically $(srcdir)/../include.
134 # This is essentially the header file directory for the library
135 # routines in libiberty.
136 INCLUDE_DIR
= $(srcdir)/..
/include
137 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
139 # Where is the "-liberty" library? Typically in ../libiberty.
140 LIBIBERTY
= ..
/libiberty
/libiberty.a
142 # Where is the BFD library? Typically in ../bfd.
144 BFD
= $(BFD_DIR
)/libbfd.a
145 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
146 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
148 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
149 # -I../zlib, unless we were configured with --with-system-zlib, in which
150 # case both are empty.
154 # Where is the decnumber library? Typically in ../libdecnumber.
155 LIBDECNUMBER_DIR
= ..
/libdecnumber
156 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
157 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
158 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
160 # Where is the READLINE library? Typically in ../readline.
161 READLINE_DIR
= ..
/readline
162 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
163 READLINE
= @READLINE@
164 READLINE_DEPS
= @READLINE_DEPS@
165 READLINE_CFLAGS
= @READLINE_CFLAGS@
167 # Where is expat? This will be empty if expat was not available.
168 LIBEXPAT
= @LIBEXPAT@
170 # Where is lzma? This will be empty if lzma was not available.
173 # Where is libbabeltrace? This will be empty if lbabeltrace was not
175 LIBBABELTRACE
= @LIBBABELTRACE@
177 WARN_CFLAGS
= @WARN_CFLAGS@
178 WERROR_CFLAGS
= @WERROR_CFLAGS@
179 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
180 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
182 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
183 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
184 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
185 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
187 RDYNAMIC
= @RDYNAMIC@
189 # Where is the INTL library? Typically in ../intl.
191 INTL_DEPS
= @LIBINTL_DEP@
192 INTL_CFLAGS
= @INCINTL@
194 # Did the user give us a --with-gdb-datadir option?
195 GDB_DATADIR
= @GDB_DATADIR@
197 # Flags to pass to gdb when invoked with "make run".
200 # Helper code from gnulib.
201 GNULIB_BUILDDIR
= build-gnulib
202 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
203 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
205 # Generated headers in the gnulib directory. These must be listed
206 # so that they are generated before other files are compiled.
207 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
210 # CLI sub directory definitons
214 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
216 cli-interp.o cli-utils.o
219 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
221 cli
/cli-interp.c cli
/cli-utils.c
227 # MI sub directory definitons
230 mi-out.o mi-console.o \
231 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
232 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
233 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
234 mi-cmd-info.o mi-interp.o \
235 mi-main.o mi-parse.o mi-getopt.o
237 mi
/mi-out.c mi
/mi-console.c \
238 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
239 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
240 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
241 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
242 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
248 # TUI sub directory definitions
285 tui
/tui-wingeneral.c \
286 tui
/tui-winsource.c \
295 # GCC Compile support sub-directory definitions
297 SUBDIR_GCC_COMPILE_OBS
= \
298 compile.o compile-c-symbols.o compile-c-types.o \
299 compile-object-load.o compile-object-run.o \
300 compile-loc2c.o compile-c-support.o
301 SUBDIR_GCC_COMPILE_SRCS
= \
303 compile
/compile-c-symbols.c \
304 compile
/compile-c-types.c \
305 compile
/compile-object-load.c \
306 compile
/compile-object-load.h \
307 compile
/compile-object-run.c \
308 compile
/compile-object-run.h \
309 compile
/compile-loc2c.c \
310 compile
/compile-c-support.c
312 # Guile sub directory definitons for guile support.
340 SUBDIR_GUILE_SRCS
= \
343 guile
/scm-auto-load.c \
345 guile
/scm-breakpoint.c \
348 guile
/scm-exception.c \
351 guile
/scm-iterator.c \
352 guile
/scm-lazy-string.c \
353 guile
/scm-objfile.c \
357 guile
/scm-pretty-print.c \
358 guile
/scm-progspace.c \
359 guile
/scm-safe-call.c \
367 SUBDIR_GUILE_LDFLAGS
=
371 # python sub directory definitons
373 SUBDIR_PYTHON_OBS
= \
387 py-finishbreakpoint.o \
397 py-newobjfileevent.o \
413 SUBDIR_PYTHON_SRCS
= \
416 python
/py-auto-load.c \
418 python
/py-bpevent.c \
419 python
/py-breakpoint.c \
421 python
/py-continueevent.c \
422 python
/py-xmethods.c \
424 python
/py-evtregistry.c \
426 python
/py-exitedevent.c \
427 python
/py-finishbreakpoint.c \
429 python
/py-framefilter.c \
430 python
/py-function.c \
431 python
/py-gdb-readline.c \
432 python
/py-inferior.c \
433 python
/py-infevents.c \
434 python
/py-infthread.c \
435 python
/py-lazy-string.c \
436 python
/py-linetable.c \
437 python
/py-newobjfileevent.c \
438 python
/py-objfile.c \
440 python
/py-prettyprint.c \
441 python
/py-progspace.c \
442 python
/py-signalevent.c \
443 python
/py-stopevent.c \
446 python
/py-threadevent.c \
453 SUBDIR_PYTHON_LDFLAGS
=
454 SUBDIR_PYTHON_CFLAGS
=
456 # Opcodes currently live in one of two places. Either they are in the
457 # opcode library, typically ../opcodes, or they are in a header file
459 # Where is the "-lopcodes" library, with (some of) the opcode tables and
461 OPCODES_DIR
= ..
/opcodes
462 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
463 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
464 # Where are the other opcode tables which only have header file
466 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
467 # Some source files like to use #include "opcodes/file.h"
468 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
470 # The simulator is usually nonexistent; targets that include one
471 # should set this to list all the .o or .a files to be linked in.
474 WIN32LIBS
= @WIN32LIBS@
476 # Tcl et al cflags and libraries
478 TCL_CFLAGS
= @TCL_INCLUDE@
479 GDBTKLIBS
= @GDBTKLIBS@
480 # Extra flags that the GDBTK files need:
481 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
484 TK_CFLAGS
= @TK_INCLUDE@
486 X11_CFLAGS
= @TK_XINCLUDES@
490 WIN32LDAPP
= @WIN32LDAPP@
493 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
494 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
496 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
498 # The version of gdbtk we're building. This should be kept
499 # in sync with GDBTK_VERSION and friends in gdbtk.h.
501 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
503 # Gdbtk requires an absolute path to the source directory or
504 # the testsuite won't run properly.
505 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
508 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
509 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
510 SUBDIR_GDBTK_SRCS
= \
511 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
512 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
513 gdbtk
/generic
/gdbtk-interp.c \
514 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
515 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
516 gdbtk
/generic
/gdbtk-main.c
517 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
518 SUBDIR_GDBTK_LDFLAGS
=
519 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
521 CONFIG_OBS
= @CONFIG_OBS@
522 CONFIG_SRCS
= @CONFIG_SRCS@
523 CONFIG_DEPS
= @CONFIG_DEPS@
524 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
525 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
526 CONFIG_ALL
= @CONFIG_ALL@
527 CONFIG_CLEAN
= @CONFIG_CLEAN@
528 CONFIG_INSTALL
= @CONFIG_INSTALL@
529 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
530 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
532 # -I. for config files.
533 # -I$(srcdir) for gdb internal headers.
534 # -I$(srcdir)/config for more generic config files.
536 # It is also possible that you will need to add -I/usr/include/sys if
537 # your system doesn't have fcntl.h in /usr/include (which is where it
538 # should be according to Posix).
540 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
541 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
543 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
544 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
546 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
548 # CFLAGS is specifically reserved for setting from the command line
549 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
552 # Set by configure, for e.g. expat. Python installations are such that
553 # C headers are included using their basename (for example, we #include
554 # <Python.h> rather than, say, <python/Python.h>). Since the file names
555 # are sometimes a little generic, we think that the risk of collision
556 # with other header files is high. If that happens, we try to mitigate
557 # a bit the consequences by putting the Python includes last in the list.
558 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
560 # Need to pass this to testsuite for "make check". Probably should be
561 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
562 # so "make check" has the same result no matter where it is run.
565 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
566 INTERNAL_CFLAGS_BASE
= \
567 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
568 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) $(ZLIBINC
) \
569 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
570 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
571 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
572 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
574 # LDFLAGS is specifically reserved for setting from the command line
578 # Profiling options need to go here to work.
579 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
580 # and have it work; that's why CFLAGS is here.
581 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
582 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
584 # If your system is missing alloca(), or, more likely, it's there but
585 # it doesn't work, then refer to libiberty.
587 # Libraries and corresponding dependencies for compiling gdb.
588 # XM_CLIBS, defined in *config files, have host-dependent libs.
589 # LIBIBERTY appears twice on purpose.
590 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(ZLIB
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
591 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
592 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
593 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) \
594 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
595 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
596 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
598 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
599 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
604 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
605 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
611 # XML files to build in to GDB.
612 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
613 $(srcdir)/features
/library-list.dtd \
614 $(srcdir)/features
/library-list-aix.dtd \
615 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
616 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd \
617 $(srcdir)/features
/btrace.dtd
$(srcdir)/features
/btrace-conf.dtd
619 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
620 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
621 # etc., then there will be (as part of the C library or perhaps as
622 # part of libiberty) a POSIX interface. But at least for now the
623 # host-dependent makefile fragment might need to use something else
625 SER_HARDWIRE
= @SER_HARDWIRE@
627 # The `remote' debugging target is supported for most architectures,
628 # but not all (e.g. 960)
629 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
630 remote-notif.o ctf.o tracefile.o tracefile-tfile.o
632 # This is remote-sim.o if a simulator is to be linked in.
635 # Target-dependent object files.
636 TARGET_OBS
= @TARGET_OBS@
638 # All target-dependent objects files that require 64-bit CORE_ADDR
639 # (used with --enable-targets=all --enable-64-bit-bfd).
640 ALL_64_TARGET_OBS
= \
641 aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
642 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
643 alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
644 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
645 amd64-linux-tdep.o amd64nbsd-tdep.o \
646 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
647 ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
649 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
650 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
652 # All other target-dependent objects files (used with --enable-targets=all).
654 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
655 armnbsd-tdep.o armobsd-tdep.o \
656 arm-tdep.o arm-wince-tdep.o \
658 bfin-linux-tdep.o bfin-tdep.o \
659 cris-linux-tdep.o cris-tdep.o \
662 frv-linux-tdep.o frv-tdep.o \
665 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
666 hppa-linux-tdep.o hppa-tdep.o \
667 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
668 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
669 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
670 i386-dicos-tdep.o i386-darwin-tdep.o \
675 m32r-linux-tdep.o m32r-tdep.o \
677 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
680 microblaze-tdep.o microblaze-linux-tdep.o \
681 mips-linux-tdep.o mips-sde-tdep.o \
682 mipsnbsd-tdep.o mips-tdep.o \
683 mn10300-linux-tdep.o mn10300-tdep.o \
687 nios2-tdep.o nios2-linux-tdep.o \
689 ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
690 ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
691 rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
692 rs6000-lynx178-tdep.o \
696 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
697 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
698 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
699 spu-tdep.o spu-multiarch.o solib-spu.o \
700 tic6x-tdep.o tic6x-linux-tdep.o \
701 tilegx-tdep.o tilegx-linux-tdep.o \
703 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
705 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
708 nbsd-tdep.o obsd-tdep.o \
710 solib-frv.o solib-svr4.o \
711 solib-darwin.o solib-dsbt.o \
712 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
713 remote-m32r-sdi.o remote-mips.o \
720 # Host-dependent makefile fragment comes in here.
722 # End of host-dependent makefile fragment
726 "exec_prefix=$(exec_prefix)" \
727 "infodir=$(infodir)" \
728 "datarootdir=$(datarootdir)" \
730 "htmldir=$(htmldir)" \
734 "datadir=$(datadir)" \
735 "includedir=$(includedir)" \
736 "against=$(against)" \
737 "DESTDIR=$(DESTDIR)" \
739 "AR_FLAGS=$(AR_FLAGS)" \
743 "CXXFLAGS=$(CXXFLAGS)" \
744 "DLLTOOL=$(DLLTOOL)" \
745 "LDFLAGS=$(LDFLAGS)" \
747 "MAKEINFO=$(MAKEINFO)" \
748 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
749 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
750 "MAKEHTML=$(MAKEHTML)" \
751 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
752 "INSTALL=$(INSTALL)" \
753 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
754 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
755 "INSTALL_DATA=$(INSTALL_DATA)" \
756 "RUNTEST=$(RUNTEST)" \
757 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
759 # Flags that we pass when building the testsuite.
761 # empty for native, $(target_alias)/ for cross
762 target_subdir
= @target_subdir@
765 if [ -f $${rootme}/../gcc/xgcc ] ; then \
766 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
767 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
769 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
772 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
775 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
780 if [ -f $${rootme}/../gcc/xg++ ] ; then \
781 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
782 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
784 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
787 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
790 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
794 # The use of $$(x_FOR_TARGET) reduces the command line length by not
795 # duplicating the lengthy definition.
796 TARGET_FLAGS_TO_PASS
= \
798 "exec_prefix=$(exec_prefix)" \
799 "against=$(against)" \
800 'CC=$$(CC_FOR_TARGET)' \
801 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
803 'CXX=$$(CXX_FOR_TARGET)' \
804 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
805 "CXXFLAGS=$(CXXFLAGS)" \
806 "INSTALL=$(INSTALL)" \
807 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
808 "INSTALL_DATA=$(INSTALL_DATA)" \
809 "MAKEINFO=$(MAKEINFO)" \
810 "MAKEHTML=$(MAKEHTML)" \
811 "RUNTEST=$(RUNTEST)" \
812 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
813 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
816 # All source files that go into linking GDB.
817 # Links made at configuration time should not be specified here, since
818 # SFILES is used in building the distribution archive.
820 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
822 addrmap.c auto-load.c \
823 auxv.c ax-general.c ax-gdb.c \
827 block.c blockframe.c \
828 breakpoint.c break-catch-sig.c break-catch-throw.c \
829 break-catch-syscall.c \
830 build-id.c buildsym.c \
831 c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
832 charset.c common
/cleanups.c cli-out.c coffread.c coff-pe-read.c \
833 complaints.c completer.c continuations.c corefile.c corelow.c \
834 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
835 d-exp.y d-lang.c d-valprint.c \
837 dbxread.c demangle.c dictionary.c disasm.c doublest.c \
838 dtrace-probe.c dummy-frame.c \
839 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
840 dwarf2-frame-tailcall.c \
841 elfread.c environ.c eval.c event-loop.c event-top.c \
842 exceptions.c expprint.c extension.c \
843 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
844 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
845 gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
846 gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
847 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
850 infcmd.c inflow.c infrun.c \
853 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
854 language.c linespec.c minidebug.c \
855 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
856 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
857 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
858 memrange.c mi
/mi-common.c \
860 objfiles.c osabi.c observer.c osdata.c \
862 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
863 proc-service.list progspace.c \
864 prologue-value.c psymtab.c \
865 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
867 serial.c ser-base.c ser-unix.c skip.c \
868 solib.c solib-target.c source.c \
869 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
870 symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
871 target.c target-dcache.c target-descriptions.c target-memory.c \
872 thread.c top.c tracepoint.c \
876 ui-out.c utils.c ui-file.h ui-file.c \
878 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
879 xml-tdesc.c xml-support.c \
880 inferior.c gdb_usleep.c \
881 record.c record-full.c gcore.c \
884 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
885 sol-thread.c stub-termcap.c \
886 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
887 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
888 common
/format.c common
/filestuff.c btrace.c record-btrace.c ctf.c \
889 target
/waitstatus.c common
/print-utils.c common
/rsp-low.c \
890 common
/errors.c common
/common-debug.c common
/common-exceptions.c \
891 common
/btrace-common.c common
/fileio.c \
892 $(SUBDIR_GCC_COMPILE_SRCS
)
894 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
896 # Header files that need to have srcdir added. Note that in the cases
897 # where we use a macro like $(gdbcmd_h), things are carefully arranged
898 # so that each .h file is listed exactly once (M-x tags-search works
899 # wrong if TAGS has files twice). Because this is tricky to get
900 # right, it is probably easiest just to list .h files here directly.
903 common
/gdb_signals.h nat
/gdb_thread_db.h common
/gdb_vecs.h \
904 common
/x86-xstate.h nat
/linux-ptrace.h nat
/mips-linux-watch.h \
905 proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
906 ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
907 exec.h m32r-tdep.h osabi.h gdbcore.h amd64bsd-nat.h \
908 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
909 ia64-tdep.h ada-lang.h varobj.h varobj-iter.h frv-tdep.h \
910 nto-tdep.h serial.h \
911 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
912 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h \
913 cli
/cli-script.h macrotab.h symtab.h common
/version.h \
914 compile
/compile.h gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
915 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
916 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
917 amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
918 gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
919 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
920 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
921 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
922 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
923 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
924 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h \
925 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
926 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
927 target.h target-dcache.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
928 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
929 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
930 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
931 tui
/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
932 expression.h score-tdep.h gdb_select.h ser-tcp.h \
933 extension.h extension-priv.h \
934 build-id.h buildsym.h valprint.h \
935 typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
936 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
937 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
938 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
939 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
940 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
941 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h \
942 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
943 m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \
944 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
945 rs6000-tdep.h rs6000-aix-tdep.h \
946 common
/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
947 language.h nbsd-tdep.h solib-svr4.h \
948 macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
949 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
950 regformats
/regdef.h config
/i386
/nm-i386gnu.h \
951 config
/i386
/nm-fbsd.h \
952 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
953 top.h bsd-kvm.h gdb-stabs.h reggroups.h \
954 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
955 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
956 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
957 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
958 psymtab.h psympriv.h progspace.h bfin-tdep.h \
959 amd64-darwin-tdep.h charset-list.h \
960 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
961 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
962 i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
964 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
965 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
966 record-full.h solib-aix.h \
967 solib-darwin.h solib-spu.h windows-nat.h xcoffread.h \
968 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
969 gnulib
/import
/extra
/snippet
/warn-on-use.h \
970 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
971 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
972 common
/format.h common
/host-defs.h utils.h common
/queue.h \
973 nat
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
974 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat
/linux-btrace.h \
975 nat
/ppc-linux.h ctf.h nat
/x86-cpuid.h nat
/x86-gcc-cpuid.h target
/resume.h \
976 target
/wait.h target
/waitstatus.h nat
/linux-nat.h nat
/linux-waitpid.h \
977 common
/print-utils.h common
/rsp-low.h nat
/x86-dregs.h x86-linux-nat.h \
978 i386-linux-nat.h common
/common-defs.h common
/errors.h common
/common-types.h \
979 common
/common-debug.h common
/cleanups.h common
/gdb_setjmp.h \
980 common
/common-exceptions.h target
/target.h common
/symbol.h \
981 common
/common-regcache.h fbsd-tdep.h nat
/linux-personality.h \
982 common
/fileio.h nat
/x86-linux.h nat
/x86-linux-dregs.h
984 # Header files that already have srcdir in them, or which are in objdir.
986 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
989 # GDB "info" files, which should be included in their entirety
990 INFOFILES
= gdb.
info*
992 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
994 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
995 # default their values the way we do for SER_HARDWIRE; in the future
996 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
997 # variables analogous to SER_HARDWIRE which get defaulted in this
1000 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
1001 $(REMOTE_OBS
) $(SIM_OBS
)
1003 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
1004 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1005 # and it's more useful to see it in the .y file.
1006 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
1008 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
1010 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
1014 auto-load.o auxv.o \
1017 blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
1018 break-catch-syscall.o \
1019 findvar.o regcache.o cleanups.o \
1020 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
1021 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
1022 block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
1023 linespec.o dictionary.o \
1026 expprint.o environ.o stack.o thread.o \
1035 macrotab.o macrocmd.o macroexp.o macroscope.o \
1037 event-loop.o event-top.o inf-loop.o completer.o \
1038 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
1040 memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
1041 build-id.o buildsym.o \
1046 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
1047 dbxread.o coffread.o coff-pe-read.o \
1048 dwarf2read.o mipsread.o stabsread.o corefile.o \
1049 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
1050 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
1051 ada-tasks.o ada-varobj.o c-varobj.o \
1052 ui-out.o cli-out.o \
1054 go-lang.o go-valprint.o go-typeprint.o \
1055 jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
1056 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
1058 complaints.o typeprint.o \
1059 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
1060 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
1062 serial.o mdebugread.o top.o utils.o \
1065 frame.o frame-unwind.o doublest.o \
1068 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
1073 solib.o solib-target.o \
1074 prologue-value.o memory-map.o memrange.o \
1075 xml-support.o xml-syscall.o xml-utils.o \
1076 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
1077 inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
1078 gdb_vecs.o jit.o progspace.o skip.o probe.o \
1079 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
1080 format.o registry.o btrace.o record-btrace.o waitstatus.o \
1081 print-utils.o rsp-low.o errors.o common-debug.o debug.o \
1082 common-exceptions.o btrace-common.o fileio.o \
1083 $(SUBDIR_GCC_COMPILE_OBS
)
1087 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1088 CLEANDIRS
= $(SUBDIRS
)
1090 # List of subdirectories in the build tree that must exist.
1091 # This is used to force build failures in existing trees when
1092 # a new directory is added.
1093 # The format here is for the `case' shell command.
1094 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1096 # For now, shortcut the "configure GDB for fewer languages" stuff.
1102 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1107 d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o
1109 # Things which need to be built when making a distribution.
1111 DISTSTUFF
= $(YYFILES
)
1114 # All generated files which can be included by another file.
1115 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
1116 $(GNULIB_H
) $(NAT_GENERATED_FILES
) gcore
1122 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1123 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1127 # The check target can not use subdir_do, because subdir_do does not
1128 # use TARGET_FLAGS_TO_PASS.
1130 @if
[ -f testsuite
/Makefile
]; then \
1131 rootme
=`pwd`; export rootme
; \
1132 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1134 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1138 @if
[ -f testsuite
/Makefile
]; then \
1139 rootme
=`pwd`; export rootme
; \
1140 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1142 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1146 @if
[ -f testsuite
/Makefile
]; then \
1147 rootme
=`pwd`; export rootme
; \
1148 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1150 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-read1
; \
1153 # The idea is to parallelize testing of multilibs, for example:
1154 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1155 # will run 3 concurrent sessions of check, eventually testing all 10
1156 # combinations. GNU make is required for the % pattern to work, as is
1157 # a shell that expands alternations within braces. If GNU make is not
1158 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1159 # prevent serialized checking due to the passed RUNTESTFLAGS.
1160 # FIXME: use config.status --config not --version, when available.
1162 @if
[ -f testsuite
/config.status
]; then \
1163 rootme
=`pwd`; export rootme
; \
1164 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1165 target
=`echo "$@" | sed 's,//.*,,'`; \
1166 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1167 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1168 testdir
=testsuite.
$$vardots; \
1169 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1170 configargs
=`cd testsuite && ./config.status --version | \
1171 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1172 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1174 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1175 "\"--srcdir=\$$rootsrc/testsuite\"" \
1177 else :; fi
&& cd
$$testdir && \
1178 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1179 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1180 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1184 # The set of headers checked by 'check-headers' by default.
1185 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1187 # Try to compile each header in isolation, thus ensuring headers are
1190 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1194 # make check-headers CHECK_HEADERS="header.h list.h"
1196 # to check specific headers.
1199 @echo Checking headers.
1200 for i in
$(CHECK_HEADERS
) ; do \
1201 $(CC
) -x c
-c
-fsyntax-only
$(INTERNAL_CFLAGS
) \
1202 -include defs.h
$(srcdir)/$$i ; \
1204 .PHONY
: check-headers
1206 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1207 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1209 # Traditionally "install" depends on "all". But it may be useful
1210 # not to; for example, if the user has made some trivial change to a
1211 # source file and doesn't care about rebuilding or just wants to save the
1212 # time it takes for make to check that all is up to date.
1213 # install-only is intended to address that need.
1215 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1217 install-only
: $(CONFIG_INSTALL
)
1218 transformed_name
=`t='$(program_transform_name)'; \
1219 echo gdb | sed -e "$$t"` ; \
1220 if
test "x$$transformed_name" = x
; then \
1221 transformed_name
=gdb
; \
1225 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1226 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1227 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1228 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1229 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1230 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1232 transformed_name
=`t='$(program_transform_name)'; \
1233 echo gcore | sed -e "$$t"` ; \
1234 if
test "x$$transformed_name" = x
; then \
1235 transformed_name
=gcore
; \
1239 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1240 $(INSTALL_SCRIPT
) gcore \
1241 $(DESTDIR
)$(bindir)/$$transformed_name; \
1243 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1246 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1247 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1248 `test -z '$(STRIP)' || \
1249 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1252 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1255 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1257 uninstall: force $(CONFIG_UNINSTALL
)
1258 transformed_name
=`t='$(program_transform_name)'; \
1259 echo gdb | sed -e $$t` ; \
1260 if
test "x$$transformed_name" = x
; then \
1261 transformed_name
=gdb
; \
1265 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1266 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1267 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1269 transformed_name
=`t='$(program_transform_name)'; \
1270 echo gcore | sed -e "$$t"` ; \
1271 if
test "x$$transformed_name" = x
; then \
1272 transformed_name
=gcore
; \
1276 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1278 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1280 # The C++ name parser can be built standalone for testing.
1281 test-cp-name-parser.o
: cp-name-parser.c
1282 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1285 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1286 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1287 test-cp-name-parser.o
$(LIBIBERTY
)
1289 # We do this by grepping through sources. If that turns out to be too slow,
1290 # maybe we could just require every .o file to have an initialization routine
1291 # of a given name (top.o -> _initialize_top, etc.).
1293 # Formatting conventions: The name of the _initialize_* routines must start
1294 # in column zero, and must not be inside #if.
1296 # Note that the set of files with init functions might change, or the names
1297 # of the functions might change, so this files needs to depend on all the
1298 # object files that will be linked into gdb.
1300 # FIXME: There is a problem with this approach - init.c may force
1301 # unnecessary files to be linked in.
1303 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1304 # the first call is to _initialize_gdbtypes (implemented by explicitly
1305 # putting that function's name first in the init.l-tmp file). This is
1306 # a hack to ensure that all the architecture dependant global
1307 # builtin_type_* variables are initialized before anything else
1308 # (per-architecture code is called in the same order that it is
1309 # registered). The ``correct fix'' is to have all the builtin types
1310 # made part of the architecture and initialize them on-demand (using
1311 # gdbarch_data) just like everything else. The catch is that other
1312 # modules still take the address of these builtin types forcing them
1313 # to be variables, sigh!
1315 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1316 # anchored on the first column and excludes the ``/'' character so
1317 # that it doesn't add the $(srcdir) prefix to any file that already
1318 # has an absolute path. It turns out that $(DEC)'s True64 make
1319 # automatically adds the $(srcdir) prefixes when it encounters files
1320 # in sub-directories such as cli/ and mi/.
1322 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1323 # duplicates. Files in the gdb/ directory can end up appearing in
1324 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1326 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
) $(SUBDIR_GCC_COMPILE_SRCS
)
1327 init.c
: $(INIT_FILES
)
1329 @
rm -f init.c-tmp init.l-tmp
1331 @echo gdbtypes
> init.l-tmp
1332 @
-LANG
=C
; export LANG
; \
1333 LC_ALL
=C
; export LC_ALL
; \
1334 echo
$(INIT_FILES
) | \
1337 -e
'/^gdbtypes.[co]$$/d' \
1338 -e
'/^init.[co]$$/d' \
1339 -e
'/xdr_ld.[co]$$/d' \
1340 -e
'/xdr_ptrace.[co]$$/d' \
1341 -e
'/xdr_rdb.[co]$$/d' \
1342 -e
'/udr.[co]$$/d' \
1343 -e
'/udip2soc.[co]$$/d' \
1344 -e
'/udi2go32.[co]$$/d' \
1345 -e
'/version.[co]$$/d' \
1346 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1347 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1348 -e
's/\.[co]$$/.c/' \
1349 -e
's,signals\.c,common/signals\.c,' \
1350 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1352 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1357 * ) echo
$$f ; fs
="$$fs $$f";; \
1360 @echo
'/* Do not modify this file. */' >>init.c-tmp
1361 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1362 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1363 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1364 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1365 @echo
'void' >>init.c-tmp
1366 @echo
'initialize_all_files (void)' >>init.c-tmp
1367 @echo
'{' >>init.c-tmp
1368 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1369 @echo
'}' >>init.c-tmp
1371 @mv init.c-tmp init.c
1375 # Create a library of the gdb object files and build GDB by linking
1378 # init.o is very important. It pulls in the rest of GDB.
1379 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1380 libgdb.a
: $(LIBGDB_OBS
)
1382 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1385 # Removing the old gdb first works better if it is running, at least on SunOS.
1386 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1388 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1389 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1390 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1392 # Convenience rule to handle recursion.
1393 $(LIBGNU
) $(GNULIB_H
): all-lib
1394 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1395 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1398 # Convenience rule to handle recursion.
1399 .PHONY
: all-data-directory
1400 all-data-directory
: data-directory
/Makefile
1401 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1403 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1404 # on itself without copying the executable. So "make gdb1" will make
1405 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1406 # Removing gdb1 before the copy is the right thing if gdb1 is open
1407 # in another process.
1408 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1410 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1412 # Put the proper machine-specific files first, so M-. on a machine
1413 # specific routine gets the one for the correct machine. (FIXME: those
1414 # files go in twice; we should be removing them from the main list).
1416 # TAGS depends on all the files that go into it so you can rebuild TAGS
1417 # with `make TAGS' and not have to say `rm TAGS' first.
1419 GDB_NM_FILE
= @GDB_NM_FILE@
1420 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1422 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1423 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1424 echo $(srcdir)/$$i ; \
1425 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1427 done) | sed -e 's/\.o$$/\.c/'` \
1428 `find $(srcdir)/config -name '*.h' -print`
1432 clean mostlyclean: $(CONFIG_CLEAN
)
1433 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1434 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1435 rm -f init.c version.c observer.h observer.inc
1436 rm -f gdb
$(EXEEXT
) core make.log
1437 rm -f gdb
[0-9]$(EXEEXT
)
1438 rm -f test-cp-name-parser
$(EXEEXT
)
1439 rm -f xml-builtin.c stamp-xml
1442 # This used to depend on c-exp.c m2-exp.c TAGS
1443 # I believe this is wrong; the makefile standards for distclean just
1444 # describe removing files; the only sort of "re-create a distribution"
1445 # functionality described is if the distributed files are unmodified.
1446 # NB: While GDBSERVER might be configured on native systems, it isn't
1447 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1449 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1450 rm -rf
$(GNULIB_BUILDDIR
)
1451 rm -f gdbserver
/config.status gdbserver
/config.log
1452 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1453 rm -f gdbserver
/Makefile gdbserver
/config.cache
1454 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1455 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1456 rm -f config.log config.cache
1460 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1461 realclean: maintainer-clean
1463 local-maintainer-clean
:
1464 @echo
"This command is intended for maintainers to use;"
1465 @echo
"it deletes files that may require special tools to rebuild."
1468 ada-lex.c ada-exp.c \
1470 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1471 rm -f TAGS
$(INFOFILES
)
1473 rm -f nm.h config.status
1475 do-maintainer-clean
:
1476 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1479 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1480 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1483 @for i in
$(DODIRS
); do \
1485 $(REQUIRED_SUBDIRS
)) \
1486 if
[ ! -f .
/$$i/Makefile
] ; then \
1487 echo
"Missing $$i/Makefile" >&2 ; \
1491 if
[ -f .
/$$i/Makefile
] ; then \
1493 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1494 else exit
1 ; fi
; \
1498 Makefile
: Makefile.in config.status @frags@
1499 # Regenerate the Makefile and the tm.h / nm.h links.
1500 CONFIG_FILES
="Makefile" \
1503 $(SHELL
) config.status
1505 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1506 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1507 CONFIG_COMMANDS
="depfiles" \
1510 $(SHELL
) config.status
1512 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1513 CONFIG_FILES
="data-directory/Makefile" \
1514 CONFIG_COMMANDS
="depfiles" \
1517 $(SHELL
) config.status
1521 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
1523 jit-reader.h
: $(srcdir)/jit-reader.in
1524 $(SHELL
) config.status
$@
1526 gcore
: $(srcdir)/gcore.in
1527 $(SHELL
) config.status
$@
1529 config.h
: stamp-h
; @true
1530 stamp-h
: $(srcdir)/config.in config.status
1531 CONFIG_HEADERS
=config.h
:config.in \
1532 CONFIG_COMMANDS
="default depdir" \
1535 $(SHELL
) config.status
1537 config.status
: $(srcdir)/configure configure.tgt configure.host ..
/bfd
/development.sh
1538 $(SHELL
) config.status
--recheck
1541 ACLOCAL_AMFLAGS
= -I ..
/config
1543 # Keep these in sync with the includes in acinclude.m4.
1546 acx_configure_dir.m4 \
1550 ..
/config
/acinclude.m4 \
1551 ..
/config
/plugins.m4 \
1552 ..
/config
/lead-dot.m4 \
1553 ..
/config
/override.m4 \
1554 ..
/config
/largefile.m4 \
1555 ..
/config
/gettext-sister.m4 \
1556 ..
/config
/lib-ld.m4 \
1557 ..
/config
/lib-prefix.m4 \
1558 ..
/config
/lib-link.m4 \
1561 ..
/config
/depstand.m4 \
1562 ..
/config
/lcmessage.m4 \
1563 ..
/config
/codeset.m4 \
1566 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1567 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1570 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1571 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1572 cd
$(srcdir) && $(AUTOCONF
)
1574 AUTOHEADER
= autoheader
1575 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1576 cd
$(srcdir) && $(AUTOHEADER
)
1580 # automatic rebuilding in automake-generated Makefiles requires
1581 # this rule in the toplevel Makefile, which, with GNU make, causes
1582 # the desired updates through the implicit regeneration of the Makefile
1583 # and all of its prerequisites.
1590 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1592 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1594 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1596 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1598 # GDB MANUAL: TeX dvi file
1600 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1602 # GDB MANUAL: info file
1604 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1606 # Make copying.c from COPYING
1607 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1608 awk
-f
$(srcdir)/copying.awk \
1609 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1610 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1612 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
1613 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
1614 $(host_alias
) $(target_alias
) version.c
1616 observer.h
: observer.sh doc
/observer.texi
1617 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1619 observer.inc
: observer.sh doc
/observer.texi
1620 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1623 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1624 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1626 gdb.cxref
: $(SFILES
)
1627 cxref
-I.
$(SFILES
) >gdb.cxref
1631 # GNU Make has an annoying habit of putting *all* the Makefile variables
1632 # into the environment, unless you include this target as a circumvention.
1633 # Rumor is that this will be fixed (and this target can be removed)
1637 # GNU Make 3.63 has a different problem: it keeps tacking command line
1638 # overrides onto the definition of $(MAKE). This variable setting
1643 aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
1644 aarch64-linux-nat.c \
1646 alphabsd-nat.c alpha-linux-nat.c \
1647 alpha-tdep.c alpha-mdebug-tdep.c \
1648 alpha-linux-tdep.c \
1649 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1650 amd64-nat.c amd64-tdep.c \
1651 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1652 amd64nbsd-nat.c amd64nbsd-tdep.c \
1653 amd64obsd-nat.c amd64obsd-tdep.c \
1654 amd64-darwin-tdep.c \
1655 amd64-dicos-tdep.c \
1656 amd64-linux-nat.c amd64-linux-tdep.c \
1658 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1659 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1661 bfin-linux-tdep.c bfin-tdep.c \
1662 bsd-uthread.c bsd-kvm.c \
1664 dcache.c dicos-tdep.c darwin-nat.c \
1671 go32-nat.c h8300-tdep.c \
1673 hppa-linux-tdep.c hppa-linux-nat.c \
1675 hppanbsd-nat.c hppanbsd-tdep.c \
1676 hppaobsd-nat.c hppaobsd-tdep.c \
1677 i386-tdep.c i386-linux-nat.c \
1678 i386v4-nat.c i386-cygwin-tdep.c \
1679 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1680 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1682 i386-darwin-tdep.c i386-darwin-nat.c \
1684 i386-linux-tdep.c x86-nat.c \
1685 i386-sol2-nat.c i386-sol2-tdep.c \
1686 i386gnu-nat.c i386gnu-tdep.c \
1687 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1689 ia64-libunwind-tdep.c \
1696 m32r-linux-nat.c m32r-linux-tdep.c \
1698 m68kbsd-nat.c m68kbsd-tdep.c \
1699 m68klinux-nat.c m68klinux-tdep.c \
1700 m88k-tdep.c m88kbsd-nat.c \
1701 microblaze-tdep.c microblaze-linux-tdep.c \
1702 mingw-hdep.c common
/mingw-strerror.c \
1703 mips-linux-nat.c mips-linux-tdep.c \
1706 mipsnbsd-nat.c mipsnbsd-tdep.c \
1707 mips64obsd-nat.c mips64obsd-tdep.c \
1709 nios2-tdep.c nios2-linux-tdep.c \
1710 nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
1711 posix-hdep.c common
/posix-strerror.c \
1712 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
1713 ppcfbsd-nat.c ppcfbsd-tdep.c \
1714 ppcnbsd-nat.c ppcnbsd-tdep.c \
1715 ppcobsd-nat.c ppcobsd-tdep.c \
1717 ravenscar-thread.c \
1718 remote-m32r-sdi.c remote-mips.c \
1722 rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
1723 rs6000-lynx178-tdep.c \
1725 s390-linux-tdep.c s390-linux-nat.c \
1727 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1728 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1731 sparc-linux-nat.c sparc-linux-tdep.c \
1732 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1733 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1734 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1735 sparc64nbsd-nat.c sparc64nbsd-tdep.c \
1736 sparc64obsd-nat.c sparc64obsd-tdep.c \
1737 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1738 sparc-ravenscar-thread.c \
1739 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1740 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1742 vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1743 windows-nat.c windows-tdep.c \
1746 xtensa-tdep.c xtensa-config.c \
1747 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1749 # Some files need explicit build rules (due to -Werror problems) or due
1750 # to sub-directory fun 'n' games.
1752 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1753 # errors. It turns out that that is the least of monitor.c's
1754 # problems. The function print_vsprintf appears to be using
1755 # va_arg(long) to extract CORE_ADDR parameters - something that
1756 # definitly will not work. "monitor.c" needs to be rewritten so that
1757 # it doesn't use format strings and instead uses callbacks.
1758 monitor.o
: $(srcdir)/monitor.c
1759 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1760 $(COMPILE.post
) $(srcdir)/monitor.c
1763 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1764 # checks format strings.
1765 printcmd.o
: $(srcdir)/printcmd.c
1766 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1767 $(COMPILE.post
) $(srcdir)/printcmd.c
1770 # ada-exp.c can appear in srcdir, for releases; or in ., for
1771 # development builds.
1772 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
1774 # Some versions of flex give output that triggers
1775 # -Wold-style-definition.
1776 ada-exp.o
: ada-exp.c
1777 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
1778 $(COMPILE.post
) $(ADA_EXP_C
)
1781 # Message files. Based on code in gcc/Makefile.in.
1783 # Rules for generating translated message descriptions. Disabled by
1784 # autoconf if the tools are not available.
1786 .SUFFIXES
: .po .gmo .pox .pot
1787 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1791 # This notation should be acceptable to all Make implementations used
1792 # by people who are interested in updating .po files.
1793 update-po
: $(CATALOGS
:.gmo
=.pox
)
1795 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1798 -test -d po || mkdir po
1799 $(GMSGFMT
) --statistics
-o
$@
$<
1801 # The new .po has to be gone over by hand, so we deposit it into
1802 # build/po with a different extension. If build/po/$(PACKAGE).pot
1803 # exists, use it (it was just created), else use the one in srcdir.
1805 -test -d po || mkdir po
1806 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1807 then echo po/$(PACKAGE).pot; \
1808 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1810 # This rule has to look for .gmo modules in both srcdir and the cwd,
1811 # and has to check that we actually have a catalog for each language,
1812 # in case they weren't built or included with the distribution.
1814 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1815 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1816 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1817 if
[ -f
$$cat ]; then
:; \
1818 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1821 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1822 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1823 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1824 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1825 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1828 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1829 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1830 if
[ -f
$$cat ]; then
:; \
1831 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1834 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1835 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1837 # Delete po/*.gmo only if we are not building in the source directory.
1839 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1841 # Rule for regenerating the message template (gdb.pot). Instead of
1842 # forcing everyone to edit POTFILES.in, which proved impractical, this
1843 # rule has no dependencies and always regenerates gdb.pot. This is
1844 # relatively harmless since the .po files do not directly depend on
1845 # it. The .pot file is left in the build directory. Since GDB's
1846 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1847 # files) force this rule.
1848 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1849 po
/$(PACKAGE
).pot
: force
1850 -test -d po || mkdir po
1851 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1855 # YACC/LEX dependencies
1857 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1858 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1859 # said LANG-exp.c rather than ./c-exp.c some makes would
1860 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1861 # decls for malloc/realloc/free which conflict with everything else.
1862 # Strictly speaking c-exp.c should therefore depend on
1863 # Makefile.in, but that was a pretty big annoyance.
1868 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1869 ||
(rm -f
$@
; false
)
1870 sed
-e
'/extern.*malloc/d' \
1871 -e
'/extern.*realloc/d' \
1872 -e
'/extern.*free/d' \
1873 -e
'/include.*malloc.h/d' \
1874 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1875 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1876 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1877 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1878 -e
'/^#line.*y.tab.c/d' \
1882 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1883 $(FLEX
) -o
$@
$< && \
1885 sed
-e
'/extern.*malloc/d' \
1886 -e
'/extern.*realloc/d' \
1887 -e
'/extern.*free/d' \
1888 -e
'/include.*malloc.h/d' \
1889 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1890 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1891 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1892 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1893 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1897 elif
[ -f
$@
]; then \
1898 echo
"Warning: $*.c older than $*.l and flex not available."; \
1900 echo
"$@ missing and flex not available."; \
1904 .PRECIOUS
: ada-lex.c
1908 xml-builtin.c
: stamp-xml
; @true
1909 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1910 rm -f xml-builtin.tmp
1912 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1913 xml-builtin.tmp
$(XMLFILES
)
1914 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1915 echo stamp
> stamp-xml
1917 .PRECIOUS
: xml-builtin.c
1920 # gdb/cli/ dependencies
1922 # Need to explicitly specify the compile rule as make will do nothing
1923 # or try to compile the object file into the sub-directory.
1925 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1926 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1929 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1930 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1933 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1934 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1937 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1938 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1941 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1942 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1945 cli-script.o
: $(srcdir)/cli
/cli-script.c
1946 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1949 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1950 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1953 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1954 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1957 # GCC Compile support dependencies
1959 # Need to explicitly specify the compile rule as make will do nothing
1960 # or try to compile the object file into the sub-directory.
1962 compile.o
: $(srcdir)/compile
/compile.c
1963 $(COMPILE
) $(srcdir)/compile
/compile.c
1966 compile-c-types.o
: $(srcdir)/compile
/compile-c-types.c
1967 $(COMPILE
) $(srcdir)/compile
/compile-c-types.c
1970 compile-c-symbols.o
: $(srcdir)/compile
/compile-c-symbols.c
1971 $(COMPILE
) $(srcdir)/compile
/compile-c-symbols.c
1974 compile-object-load.o
: $(srcdir)/compile
/compile-object-load.c
1975 $(COMPILE
) $(srcdir)/compile
/compile-object-load.c
1978 compile-object-run.o
: $(srcdir)/compile
/compile-object-run.c
1979 $(COMPILE
) $(srcdir)/compile
/compile-object-run.c
1982 compile-loc2c.o
: $(srcdir)/compile
/compile-loc2c.c
1983 $(COMPILE
) $(srcdir)/compile
/compile-loc2c.c
1986 compile-c-support.o
: $(srcdir)/compile
/compile-c-support.c
1987 $(COMPILE
) $(srcdir)/compile
/compile-c-support.c
1992 # GDBTK sub-directory
1994 # Need to explicitly specify the compile rule as make will do nothing
1995 # or try to compile the object file into the mi directory.
1997 all-gdbtk
: insight
$(EXEEXT
)
2000 transformed_name
=`t='$(program_transform_name)'; \
2001 echo insight | sed -e $$t` ; \
2002 if
test "x$$transformed_name" = x
; then \
2003 transformed_name
=insight
; \
2007 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
2008 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
2009 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2010 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2011 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
2012 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2013 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
2014 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
2015 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
2016 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2017 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
2018 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
2019 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2020 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
2021 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
2022 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
2023 cd
$(srcdir)/gdbtk
/library
; \
2024 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
2026 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
2030 transformed_name
=`t='$(program_transform_name)'; \
2031 echo insight | sed -e $$t` ; \
2032 if
test "x$$transformed_name" = x
; then \
2033 transformed_name
=insight
; \
2037 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2038 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
2041 rm -f insight
$(EXEEXT
)
2043 # Removing the old gdb first works better if it is running, at least on SunOS.
2044 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
2045 $(CDEPS
) $(TDEPLIBS
)
2046 rm -f insight
$(EXEEXT
)
2047 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2048 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
2049 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2051 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
2052 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
2054 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
2055 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
2057 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
2058 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
2060 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
2061 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
2064 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
2065 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
2068 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
2069 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
2072 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
2073 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
2076 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
2077 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
2080 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2081 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2084 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2085 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2088 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2089 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2092 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2093 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2096 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2097 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2102 # gdb/mi/ dependencies
2104 # Need to explicitly specify the compile rule as make will do nothing
2105 # or try to compile the object file into the sub-directory.
2107 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
2108 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
2111 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
2112 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
2115 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
2116 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
2119 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
2120 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
2123 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
2124 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
2127 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
2128 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
2131 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
2132 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
2135 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
2136 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
2139 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
2140 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
2143 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
2144 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
2147 mi-console.o
: $(srcdir)/mi
/mi-console.c
2148 $(COMPILE
) $(srcdir)/mi
/mi-console.c
2151 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
2152 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
2155 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
2156 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
2159 mi-main.o
: $(srcdir)/mi
/mi-main.c
2160 $(COMPILE
) $(srcdir)/mi
/mi-main.c
2163 mi-out.o
: $(srcdir)/mi
/mi-out.c
2164 $(COMPILE
) $(srcdir)/mi
/mi-out.c
2167 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
2168 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
2171 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
2172 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
2175 mi-common.o
: $(srcdir)/mi
/mi-common.c
2176 $(COMPILE
) $(srcdir)/mi
/mi-common.c
2179 # gdb/common/ dependencies
2181 # Need to explicitly specify the compile rule as make will do nothing
2182 # or try to compile the object file into the sub-directory.
2184 signals.o
: $(srcdir)/common
/signals.c
2185 $(COMPILE
) $(srcdir)/common
/signals.c
2188 common-utils.o
: ${srcdir}/common
/common-utils.c
2189 $(COMPILE
) $(srcdir)/common
/common-utils.c
2192 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
2193 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
2196 xml-utils.o
: ${srcdir}/common
/xml-utils.c
2197 $(COMPILE
) $(srcdir)/common
/xml-utils.c
2200 ptid.o
: ${srcdir}/common
/ptid.c
2201 $(COMPILE
) $(srcdir)/common
/ptid.c
2204 buffer.o
: ${srcdir}/common
/buffer.c
2205 $(COMPILE
) $(srcdir)/common
/buffer.c
2208 filestuff.o
: $(srcdir)/common
/filestuff.c
2209 $(COMPILE
) $(srcdir)/common
/filestuff.c
2212 format.o
: ${srcdir}/common
/format.c
2213 $(COMPILE
) $(srcdir)/common
/format.c
2216 common-agent.o
: $(srcdir)/common
/agent.c
2217 $(COMPILE
) $(srcdir)/common
/agent.c
2220 vec.o
: ${srcdir}/common
/vec.c
2221 $(COMPILE
) $(srcdir)/common
/vec.c
2224 print-utils.o
: ${srcdir}/common
/print-utils.c
2225 $(COMPILE
) $(srcdir)/common
/print-utils.c
2228 rsp-low.o
: ${srcdir}/common
/rsp-low.c
2229 $(COMPILE
) $(srcdir)/common
/rsp-low.c
2232 errors.o
: ${srcdir}/common
/errors.c
2233 $(COMPILE
) $(srcdir)/common
/errors.c
2236 common-debug.o
: ${srcdir}/common
/common-debug.c
2237 $(COMPILE
) $(srcdir)/common
/common-debug.c
2240 cleanups.o
: ${srcdir}/common
/cleanups.c
2241 $(COMPILE
) $(srcdir)/common
/cleanups.c
2244 common-exceptions.o
: ${srcdir}/common
/common-exceptions.c
2245 $(COMPILE
) $(srcdir)/common
/common-exceptions.c
2248 posix-strerror.o
: ${srcdir}/common
/posix-strerror.c
2249 $(COMPILE
) $(srcdir)/common
/posix-strerror.c
2252 mingw-strerror.o
: ${srcdir}/common
/mingw-strerror.c
2253 $(COMPILE
) $(srcdir)/common
/mingw-strerror.c
2256 btrace-common.o
: ${srcdir}/common
/btrace-common.c
2257 $(COMPILE
) $(srcdir)/common
/btrace-common.c
2260 fileio.o
: ${srcdir}/common
/fileio.c
2261 $(COMPILE
) $(srcdir)/common
/fileio.c
2264 # gdb/target/ dependencies
2266 # Need to explicitly specify the compile rule as make will do nothing
2267 # or try to compile the object file into the sub-directory.
2269 waitstatus.o
: ${srcdir}/target
/waitstatus.c
2270 $(COMPILE
) $(srcdir)/target
/waitstatus.c
2273 # gdb/nat/ dependencies
2275 # Need to explicitly specify the compile rule as make will do nothing
2276 # or try to compile the object file into the sub-directory.
2278 x86-dregs.o
: ${srcdir}/nat
/x86-dregs.c
2279 $(COMPILE
) $(srcdir)/nat
/x86-dregs.c
2282 linux-btrace.o
: ${srcdir}/nat
/linux-btrace.c
2283 $(COMPILE
) $(srcdir)/nat
/linux-btrace.c
2286 linux-osdata.o
: ${srcdir}/nat
/linux-osdata.c
2287 $(COMPILE
) $(srcdir)/nat
/linux-osdata.c
2290 linux-procfs.o
: $(srcdir)/nat
/linux-procfs.c
2291 $(COMPILE
) $(srcdir)/nat
/linux-procfs.c
2294 linux-ptrace.o
: $(srcdir)/nat
/linux-ptrace.c
2295 $(COMPILE
) $(srcdir)/nat
/linux-ptrace.c
2298 linux-waitpid.o
: ${srcdir}/nat
/linux-waitpid.c
2299 $(COMPILE
) $(srcdir)/nat
/linux-waitpid.c
2302 mips-linux-watch.o
: ${srcdir}/nat
/mips-linux-watch.c
2303 $(COMPILE
) $(srcdir)/nat
/mips-linux-watch.c
2306 ppc-linux.o
: ${srcdir}/nat
/ppc-linux.c
2307 $(COMPILE
) $(srcdir)/nat
/ppc-linux.c
2310 linux-personality.o
: ${srcdir}/nat
/linux-personality.c
2311 $(COMPILE
) $(srcdir)/nat
/linux-personality.c
2314 x86-linux.o
: ${srcdir}/nat
/x86-linux.c
2315 $(COMPILE
) $(srcdir)/nat
/x86-linux.c
2318 x86-linux-dregs.o
: ${srcdir}/nat
/x86-linux-dregs.c
2319 $(COMPILE
) $(srcdir)/nat
/x86-linux-dregs.c
2323 # gdb/tui/ dependencies
2325 # Need to explicitly specify the compile rule as make will do nothing
2326 # or try to compile the object file into the sub-directory.
2328 tui.o
: $(srcdir)/tui
/tui.c
2329 $(COMPILE
) $(srcdir)/tui
/tui.c
2332 tui-command.o
: $(srcdir)/tui
/tui-command.c
2333 $(COMPILE
) $(srcdir)/tui
/tui-command.c
2336 tui-data.o
: $(srcdir)/tui
/tui-data.c
2337 $(COMPILE
) $(srcdir)/tui
/tui-data.c
2340 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
2341 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
2344 tui-file.o
: $(srcdir)/tui
/tui-file.c
2345 $(COMPILE
) $(srcdir)/tui
/tui-file.c
2348 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
2349 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
2352 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
2353 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
2356 tui-io.o
: $(srcdir)/tui
/tui-io.c
2357 $(COMPILE
) $(srcdir)/tui
/tui-io.c
2360 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
2361 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
2364 tui-out.o
: $(srcdir)/tui
/tui-out.c
2365 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2368 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2369 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2372 tui-source.o
: $(srcdir)/tui
/tui-source.c
2373 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2376 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2377 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2380 tui-win.o
: $(srcdir)/tui
/tui-win.c
2381 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2384 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2385 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2388 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2389 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2392 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2393 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2396 # gdb/guile dependencies
2398 # Need to explicitly specify the compile rule as make will do nothing
2399 # or try to compile the object file into the sub-directory.
2401 guile.o
: $(srcdir)/guile
/guile.c
2402 $(COMPILE
) $(srcdir)/guile
/guile.c
2405 scm-arch.o
: $(srcdir)/guile
/scm-arch.c
2406 $(COMPILE
) $(srcdir)/guile
/scm-arch.c
2409 scm-auto-load.o
: $(srcdir)/guile
/scm-auto-load.c
2410 $(COMPILE
) $(srcdir)/guile
/scm-auto-load.c
2413 scm-block.o
: $(srcdir)/guile
/scm-block.c
2414 $(COMPILE
) $(srcdir)/guile
/scm-block.c
2417 scm-breakpoint.o
: $(srcdir)/guile
/scm-breakpoint.c
2418 $(COMPILE
) $(srcdir)/guile
/scm-breakpoint.c
2421 scm-cmd.o
: $(srcdir)/guile
/scm-cmd.c
2422 $(COMPILE
) $(srcdir)/guile
/scm-cmd.c
2425 scm-disasm.o
: $(srcdir)/guile
/scm-disasm.c
2426 $(COMPILE
) $(srcdir)/guile
/scm-disasm.c
2429 scm-exception.o
: $(srcdir)/guile
/scm-exception.c
2430 $(COMPILE
) $(srcdir)/guile
/scm-exception.c
2433 scm-frame.o
: $(srcdir)/guile
/scm-frame.c
2434 $(COMPILE
) $(srcdir)/guile
/scm-frame.c
2437 scm-gsmob.o
: $(srcdir)/guile
/scm-gsmob.c
2438 $(COMPILE
) $(srcdir)/guile
/scm-gsmob.c
2441 scm-iterator.o
: $(srcdir)/guile
/scm-iterator.c
2442 $(COMPILE
) $(srcdir)/guile
/scm-iterator.c
2445 scm-lazy-string.o
: $(srcdir)/guile
/scm-lazy-string.c
2446 $(COMPILE
) $(srcdir)/guile
/scm-lazy-string.c
2449 scm-math.o
: $(srcdir)/guile
/scm-math.c
2450 $(COMPILE
) $(srcdir)/guile
/scm-math.c
2453 scm-objfile.o
: $(srcdir)/guile
/scm-objfile.c
2454 $(COMPILE
) $(srcdir)/guile
/scm-objfile.c
2457 scm-param.o
: $(srcdir)/guile
/scm-param.c
2458 $(COMPILE
) $(srcdir)/guile
/scm-param.c
2461 scm-ports.o
: $(srcdir)/guile
/scm-ports.c
2462 $(COMPILE
) $(srcdir)/guile
/scm-ports.c
2465 scm-pretty-print.o
: $(srcdir)/guile
/scm-pretty-print.c
2466 $(COMPILE
) $(srcdir)/guile
/scm-pretty-print.c
2469 scm-progspace.o
: $(srcdir)/guile
/scm-progspace.c
2470 $(COMPILE
) $(srcdir)/guile
/scm-progspace.c
2473 scm-safe-call.o
: $(srcdir)/guile
/scm-safe-call.c
2474 $(COMPILE
) $(srcdir)/guile
/scm-safe-call.c
2477 scm-string.o
: $(srcdir)/guile
/scm-string.c
2478 $(COMPILE
) $(srcdir)/guile
/scm-string.c
2481 scm-symbol.o
: $(srcdir)/guile
/scm-symbol.c
2482 $(COMPILE
) $(srcdir)/guile
/scm-symbol.c
2485 scm-symtab.o
: $(srcdir)/guile
/scm-symtab.c
2486 $(COMPILE
) $(srcdir)/guile
/scm-symtab.c
2489 scm-type.o
: $(srcdir)/guile
/scm-type.c
2490 $(COMPILE
) $(srcdir)/guile
/scm-type.c
2493 scm-utils.o
: $(srcdir)/guile
/scm-utils.c
2494 $(COMPILE
) $(srcdir)/guile
/scm-utils.c
2497 scm-value.o
: $(srcdir)/guile
/scm-value.c
2498 $(COMPILE
) $(srcdir)/guile
/scm-value.c
2501 # gdb/python/ dependencies
2503 # Need to explicitly specify the compile rule as make will do nothing
2504 # or try to compile the object file into the sub-directory.
2506 # Flags needed to compile Python code
2507 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2509 python.o
: $(srcdir)/python
/python.c
2510 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2513 py-arch.o
: $(srcdir)/python
/py-arch.c
2514 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-arch.c
2517 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2518 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2521 py-block.o
: $(srcdir)/python
/py-block.c
2522 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2525 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2526 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2529 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2530 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2533 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2534 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2537 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2538 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2541 py-xmethods.o
: $(srcdir)/python
/py-xmethods.c
2542 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-xmethods.c
2545 py-event.o
: $(srcdir)/python
/py-event.c
2546 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2549 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2550 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2553 py-evts.o
: $(srcdir)/python
/py-evts.c
2554 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2557 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2558 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2561 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2562 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2565 py-frame.o
: $(srcdir)/python
/py-frame.c
2566 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2569 py-framefilter.o
: $(srcdir)/python
/py-framefilter.c
2570 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-framefilter.c
2573 py-function.o
: $(srcdir)/python
/py-function.c
2574 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2577 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2578 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2581 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2582 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2585 py-infevents.o
: $(srcdir)/python
/py-infevents.c
2586 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infevents.c
2589 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2590 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2593 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2594 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2597 py-linetable.o
: $(srcdir)/python
/py-linetable.c
2598 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-linetable.c
2601 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2602 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2605 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2606 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2609 py-param.o
: $(srcdir)/python
/py-param.c
2610 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2613 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2614 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2617 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2618 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2621 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2622 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2625 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2626 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2629 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2630 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2633 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2634 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2637 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2638 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2641 py-type.o
: $(srcdir)/python
/py-type.c
2642 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2645 py-unwind.o
: $(srcdir)/python
/py-unwind.c
2646 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-unwind.c
2649 py-utils.o
: $(srcdir)/python
/py-utils.c
2650 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2653 py-value.o
: $(srcdir)/python
/py-value.c
2654 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2657 py-varobj.o
: $(srcdir)/python
/py-varobj.c
2658 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-varobj.c
2662 # Dependency tracking. Most of this is conditional on GNU Make being
2663 # found by configure; if GNU Make is not found, we fall back to a
2667 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2668 # Note that we put the dependencies into a .Tpo file, then move them
2669 # into place if the compile succeeds. We need this because gcc does
2670 # not atomically write the dependency output file.
2671 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2672 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2673 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2674 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2676 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2677 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2678 # depcomp handles atomicity for us, so we don't need a postcompile
2680 @GMAKE_TRUE@
override POSTCOMPILE
=
2683 # A list of all the objects we might care about in this build, for
2684 # dependency tracking.
2685 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2686 test-cp-name-parser.o
2688 # Ensure that generated files are created early. Use order-only
2689 # dependencies if available. They require GNU make 3.80 or newer,
2690 # and the .VARIABLES variable was introduced at the same time.
2691 @GMAKE_TRUE@
ifdef .VARIABLES
2692 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2694 $(all_object_files
) : $(generated_files
)
2698 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2700 ### end of the gdb Makefile.in.