1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
3 # Free Software Foundation, Inc.
5 # This file is part of GDB.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program; if not, write to the Free Software
19 # Foundation, Inc., 51 Franklin Street, Fifth Floor,
20 # Boston, MA 02110-1301, USA.
23 exec_prefix = @
exec_prefix@
25 host_alias
= @host_alias@
26 target_alias
= @target_alias@
27 program_transform_name
= @program_transform_name@
30 tooldir
= $(libdir)/$(target_alias
)
33 localedir
= @localedir@
35 man1dir = $(mandir)/man1
36 man2dir = $(mandir)/man2
37 man3dir = $(mandir)/man3
38 man4dir = $(mandir)/man4
39 man5dir = $(mandir)/man5
40 man6dir = $(mandir)/man6
41 man7dir = $(mandir)/man7
42 man8dir = $(mandir)/man8
43 man9dir = $(mandir)/man9
45 pdfdir
= $(prefix)/share
/doc
/gdb
46 htmldir
= $(prefix)/html
47 includedir = @
includedir@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_DATA
= @INSTALL_DATA@
79 # If you are compiling with GCC, make sure that either 1) You have the
80 # fixed include files where GCC can reach them, or 2) You use the
81 # -traditional flag. Otherwise the ioctl calls in inflow.c
82 # will be incorrectly compiled. The "fixincludes" script in the gcc
83 # distribution will fix your include files up.
86 # Dependency tracking information.
89 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
91 # Note that these are overridden by GNU make-specific code below if
92 # GNU make is used. The overrides implement dependency tracking.
94 COMPILE.post
= -c
-o
$@
95 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
98 # Directory containing source files.
104 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
105 # not defined, but ada-lex.c is present, compilation will continue,
106 # possibly with a warning.
109 YLWRAP
= $(srcdir)/..
/ylwrap
111 # where to find makeinfo, preferably one designed for texinfo-2
114 # Contrary to documentation, the current directory is not
115 # searched by texi2html, so specify it explicitly.
118 MAKEHTMLFLAGS
= -menu
-split_chapter
-I .
120 # Set this up with gcc if you have gnu ld and the loader will print out
121 # line numbers for undefined references.
125 # Where is our "include" directory? Typically $(srcdir)/../include.
126 # This is essentially the header file directory for the library
127 # routines in libiberty.
128 INCLUDE_DIR
= $(srcdir)/..
/include
129 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
131 # Where is the "-liberty" library? Typically in ../libiberty.
132 LIBIBERTY
= ..
/libiberty
/libiberty.a
134 # Where is the BFD library? Typically in ../bfd.
136 BFD
= $(BFD_DIR
)/libbfd.a
137 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
138 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
140 # Where is the decnumber library? Typically in ../libdecnumber.
141 LIBDECNUMBER_DIR
= ..
/libdecnumber
142 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
143 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
144 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
146 # Where is the READLINE library? Typically in ../readline.
147 READLINE_DIR
= ..
/readline
148 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
149 READLINE
= @READLINE@
150 READLINE_DEPS
= @READLINE_DEPS@
151 READLINE_CFLAGS
= @READLINE_CFLAGS@
153 # Where is expat? This will be empty if expat was not available.
154 LIBEXPAT
= @LIBEXPAT@
156 WARN_CFLAGS
= @WARN_CFLAGS@
157 WERROR_CFLAGS
= @WERROR_CFLAGS@
158 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
159 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
161 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
163 # Where is the INTL library? Typically in ../intl.
165 INTL_DEPS
= @LIBINTL_DEP@
166 INTL_CFLAGS
= @INCINTL@
168 # Where is the ICONV library? This can be empty if libc has iconv.
169 LIBICONV
= @LIBICONV@
171 # Did the user give us a --with-sysroot option?
172 TARGET_SYSTEM_ROOT
= @TARGET_SYSTEM_ROOT@
173 TARGET_SYSTEM_ROOT_DEFINE
= @TARGET_SYSTEM_ROOT_DEFINE@
175 # Helper code from gnulib.
176 LIBGNU
= gnulib
/libgnu.a
177 INCGNU
= -I
$(srcdir)/gnulib
-Ignulib
179 # Generated headers in the gnulib directory. These must be listed
180 # so that they are generated before other files are compiled.
181 GNULIB_H
= gnulib
/string.h @GNULIB_STDINT_H@
184 # CLI sub directory definitons
188 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o cli-utils.o \
193 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
202 # MI sub directory definitons
205 mi-out.o mi-console.o \
206 mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
207 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
209 mi-main.o mi-parse.o mi-getopt.o mi-common.o
211 mi
/mi-out.c mi
/mi-console.c \
212 mi
/mi-cmds.c mi
/mi-cmd-env.c \
213 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
214 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
215 mi
/mi-cmd-target.c mi
/mi-interp.c \
216 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c mi
/mi-common.c
223 # TUI sub directory definitions
226 # Name of the TUI program
261 tui
/tui-wingeneral.c \
262 tui
/tui-winsource.c \
270 # python sub directory definitons
272 SUBDIR_PYTHON_OBS
= \
275 SUBDIR_PYTHON_SRCS
= \
277 python
/python-utils.c
279 SUBDIR_PYTHON_LDFLAGS
=
280 SUBDIR_PYTHON_CFLAGS
=
283 # Opcodes currently live in one of two places. Either they are in the
284 # opcode library, typically ../opcodes, or they are in a header file
286 # Where is the "-lopcodes" library, with (some of) the opcode tables and
288 OPCODES_DIR
= ..
/opcodes
289 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
290 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
291 # Where are the other opcode tables which only have header file
293 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
294 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
)
296 # The simulator is usually nonexistent; targets that include one
297 # should set this to list all the .o or .a files to be linked in.
300 WIN32LIBS
= @WIN32LIBS@
302 # Tcl et al cflags and libraries
304 TCL_CFLAGS
= @TCL_INCLUDE@
305 GDBTKLIBS
= @GDBTKLIBS@
306 # Extra flags that the GDBTK files need:
307 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
310 TK_CFLAGS
= @TK_INCLUDE@
312 X11_CFLAGS
= @TK_XINCLUDES@
316 WIN32LDAPP
= @WIN32LDAPP@
319 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
320 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
322 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
324 # The version of gdbtk we're building. This should be kept
325 # in sync with GDBTK_VERSION and friends in gdbtk.h.
327 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
329 # Gdbtk requires an absolute path to the source directory or
330 # the testsuite won't run properly.
331 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
334 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
335 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
336 SUBDIR_GDBTK_SRCS
= \
337 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
338 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
339 gdbtk
/generic
/gdbtk-interp.c \
340 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
341 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
342 gdbtk
/generic
/gdbtk-main.c
343 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
344 SUBDIR_GDBTK_LDFLAGS
=
345 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
347 CONFIG_OBS
= @CONFIG_OBS@
348 CONFIG_SRCS
= @CONFIG_SRCS@
349 CONFIG_DEPS
= @CONFIG_DEPS@
350 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
351 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
352 CONFIG_ALL
= @CONFIG_ALL@
353 CONFIG_CLEAN
= @CONFIG_CLEAN@
354 CONFIG_INSTALL
= @CONFIG_INSTALL@
355 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
357 # -I. for config files.
358 # -I$(srcdir) for gdb internal headers.
359 # -I$(srcdir)/config for more generic config files.
361 # It is also possible that you will need to add -I/usr/include/sys if
362 # your system doesn't have fcntl.h in /usr/include (which is where it
363 # should be according to Posix).
365 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
367 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
368 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
370 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
372 # CFLAGS is specifically reserved for setting from the command line
373 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
376 # Set by configure, for e.g. expat.
377 INTERNAL_CPPFLAGS
= @CPPFLAGS@
379 # Need to pass this to testsuite for "make check". Probably should be
380 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
381 # so "make check" has the same result no matter where it is run.
384 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
385 INTERNAL_CFLAGS_BASE
= \
386 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
387 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
388 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
389 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
390 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
391 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
393 # LDFLAGS is specifically reserved for setting from the command line
397 # Profiling options need to go here to work.
398 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
399 # and have it work; that's why CFLAGS is here.
400 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
401 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
403 # If your system is missing alloca(), or, more likely, it's there but
404 # it doesn't work, then refer to libiberty.
406 # Libraries and corresponding dependencies for compiling gdb.
407 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
408 # LIBIBERTY appears twice on purpose.
409 # If you have the Cygnus libraries installed,
410 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
411 INSTALLED_LIBS
=-lbfd
-lreadline
-lopcodes
-liberty
-ldecnumber \
412 $(XM_CLIBS
) $(TM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
413 -lintl
-liberty
$(LIBGNU
)
414 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
415 $(XM_CLIBS
) $(TM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ \
416 $(LIBICONV
) $(LIBEXPAT
) \
417 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
418 CDEPS
= $(XM_CDEPS
) $(TM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
419 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
421 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
422 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
427 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
428 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
434 # XML files to build in to GDB.
435 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
436 $(srcdir)/features
/library-list.dtd
438 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
439 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
440 # etc., then there will be (as part of the C library or perhaps as
441 # part of libiberty) a POSIX interface. But at least for now the
442 # host-dependent makefile fragment might need to use something else
444 SER_HARDWIRE
= @SER_HARDWIRE@
446 # The `remote' debugging target is supported for most architectures,
447 # but not all (e.g. 960)
448 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
450 # This is remote-sim.o if a simulator is to be linked in.
453 # Target-dependent object files.
454 TARGET_OBS
= @TARGET_OBS@
456 # All target-dependent objects files that require 64-bit CORE_ADDR
457 # (used with --enable-targets=all --enable-64-bit-bfd).
458 ALL_64_TARGET_OBS
= \
459 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
460 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
461 amd64fbsd-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o amd64obsd-tdep.o \
462 amd64-sol2-tdep.o amd64-tdep.o \
463 ia64-linux-tdep.o ia64-tdep.o \
465 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
466 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
468 # All other target-dependent objects files (used with --enable-targets=all).
470 armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
471 arm-tdep.o arm-wince-tdep.o \
474 frv-linux-tdep.o frv-tdep.o \
476 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
477 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
478 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
479 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
480 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
484 m32r-linux-tdep.o m32r-tdep.o \
486 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
489 mips-irix-tdep.o mips-linux-tdep.o \
490 mipsnbsd-tdep.o mips-tdep.o \
491 mn10300-linux-tdep.o mn10300-tdep.o \
494 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
495 rs6000-aix-tdep.o rs6000-tdep.o \
498 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
499 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
500 sparc-sol2-tdep.o sparc-tdep.o \
503 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
505 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
508 nbsd-tdep.o obsd-tdep.o \
510 solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
511 solib-som.o solib-pa64.o \
512 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
519 # Host-dependent makefile fragment comes in here.
521 # End of host-dependent makefile fragment
525 "exec_prefix=$(exec_prefix)" \
526 "infodir=$(infodir)" \
530 "datadir=$(datadir)" \
531 "includedir=$(includedir)" \
532 "against=$(against)" \
533 "DESTDIR=$(DESTDIR)" \
535 "AR_FLAGS=$(AR_FLAGS)" \
539 "CXXFLAGS=$(CXXFLAGS)" \
540 "DLLTOOL=$(DLLTOOL)" \
541 "LDFLAGS=$(LDFLAGS)" \
543 "MAKEINFO=$(MAKEINFO)" \
544 "MAKEHTML=$(MAKEHTML)" \
545 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
546 "INSTALL=$(INSTALL)" \
547 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
548 "INSTALL_DATA=$(INSTALL_DATA)" \
549 "RUNTEST=$(RUNTEST)" \
550 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
552 # Flags that we pass when building the testsuite.
554 # empty for native, $(target_alias)/ for cross
555 target_subdir
= @target_subdir@
558 if [ -f $${rootme}/../gcc/xgcc ] ; then \
559 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
560 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
562 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
565 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
568 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
574 if [ -f $${rootme}/../gcc/xgcc ] ; then \
575 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
576 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
578 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
581 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
584 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
588 # The use of $$(x_FOR_TARGET) reduces the command line length by not
589 # duplicating the lengthy definition.
590 TARGET_FLAGS_TO_PASS
= \
592 "exec_prefix=$(exec_prefix)" \
593 "against=$(against)" \
594 'CC=$$(CC_FOR_TARGET)' \
595 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
597 'CXX=$$(CXX_FOR_TARGET)' \
598 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
599 "CXXFLAGS=$(CXXFLAGS)" \
600 "INSTALL=$(INSTALL)" \
601 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
602 "INSTALL_DATA=$(INSTALL_DATA)" \
603 "MAKEINFO=$(MAKEINFO)" \
604 "MAKEHTML=$(MAKEHTML)" \
605 "RUNTEST=$(RUNTEST)" \
606 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
608 # All source files that go into linking GDB.
609 # Links made at configuration time should not be specified here, since
610 # SFILES is used in building the distribution archive.
612 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c \
614 auxv.c ax-general.c ax-gdb.c \
617 block.c blockframe.c breakpoint.c buildsym.c \
618 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
619 charset.c cli-out.c coffread.c coff-pe-read.c \
620 complaints.c completer.c corefile.c \
621 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
623 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
624 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
625 elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \
626 f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
627 frame.c frame-base.c frame-unwind.c \
628 gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
631 infcmd.c inflow.c infrun.c \
633 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
634 language.c linespec.c \
635 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
636 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
637 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
638 objc-exp.y objc-lang.c \
639 objfiles.c osabi.c observer.c \
640 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
642 regcache.c reggroups.c remote.c remote-fileio.c \
643 scm-exp.c scm-lang.c scm-valprint.c \
645 serial.c ser-base.c ser-unix.c \
646 solib.c solib-null.c source.c \
647 stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
649 target.c target-descriptions.c target-memory.c \
650 thread.c top.c tracepoint.c \
654 ui-out.c utils.c ui-file.h ui-file.c \
656 valarith.c valops.c valprint.c value.c varobj.c vec.c \
658 xml-tdesc.c xml-support.c
660 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
662 # Header files that need to have srcdir added. Note that in the cases
663 # where we use a macro like $(gdbcmd_h), things are carefully arranged
664 # so that each .h file is listed exactly once (M-x tags-search works
665 # wrong if TAGS has files twice). Because this is tricky to get
666 # right, it is probably easiest just to list .h files here directly.
668 HFILES_NO_SRCDIR
= osf-share
/cma_debug_client.h \
669 osf-share
/HP800
/cma_thread_io.h osf-share
/cma_sequence.h \
670 osf-share
/cma_mutex.h osf-share
/cma_semaphore_defs.h \
671 osf-share
/cma_list.h osf-share
/cma_handle.h osf-share
/cma_stack.h \
672 osf-share
/cma_util.h osf-share
/RIOS
/cma_thread_io.h \
673 osf-share
/cma_errors.h osf-share
/cma_tcb_defs.h osf-share
/cma_attr.h \
674 osf-share
/cma_stack_int.h osf-share
/cma_init.h \
675 osf-share
/cma_deb_core.h osf-share
/AT386
/cma_thread_io.h \
676 osf-share
/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
677 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h gnu-v2-abi.h \
678 exec.h m32r-tdep.h osabi.h gdb-events.h gdbcore.h solib-som.h \
679 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
680 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
681 c-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
682 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h cli
/cli-dump.h \
683 cli
/cli-script.h macrotab.h symtab.h version.h gnulib
/wchar.in.h \
684 gnulib
/string.in.h gnulib
/str-two-way.h gnulib
/extra
/link-warning.h \
685 gnulib
/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver
/win32-low.h \
686 gdbserver
/i387-fp.h gdbserver
/server.h gdbserver
/terminal.h \
687 gdbserver
/mem-break.h gdbserver
/wincecompat.h gdbserver
/target.h \
688 gdbserver
/linux-low.h gdbserver
/gdb_proc_service.h \
689 gdbserver
/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
690 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
691 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
692 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
693 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
694 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
695 objfiles.h vec.h disasm.h mips-tdep.h gstdint.h ser-base.h \
696 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
697 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
698 solib-target.h shnbsd-tdep.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
699 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
700 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
701 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
702 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
703 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
704 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
705 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
706 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
707 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
708 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
709 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
710 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
711 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
712 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
713 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
714 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
715 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
716 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
717 language.h i386-cygwin-tdep.h nbsd-tdep.h wrapper.h solib-svr4.h \
718 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
719 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
720 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-cygwin.h \
721 config
/i386
/nm-linux64.h config
/i386
/nm-i386gnu.h \
722 config
/i386
/nm-fbsd.h config
/i386
/nm-i386sol2.h config
/i386
/nm-linux.h \
723 config
/i386
/nm-i386.h config
/i386
/nm-go32.h config
/nm-nto.h \
724 config
/sparc
/nm-sol2.h config
/nm-linux.h config
/mips
/nm-irix5.h \
725 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
726 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
727 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
728 sentinel-frame.h bcache.h symfile.h
730 # Header files that already have srcdir in them, or which are in objdir.
732 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h
735 # GDB "info" files, which should be included in their entirety
736 INFOFILES
= gdb.
info*
738 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
740 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
741 # default their values the way we do for SER_HARDWIRE; in the future
742 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
743 # variables analogous to SER_HARDWIRE which get defaulted in this
746 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
747 $(REMOTE_OBS
) $(SIM_OBS
)
749 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
750 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
751 # and it's more useful to see it in the .y file.
752 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
754 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
756 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
762 blockframe.o breakpoint.o findvar.o regcache.o \
763 charset.o disasm.o dummy-frame.o dfp.o \
764 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
765 block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
768 expprint.o environ.o stack.o thread.o \
773 macrotab.o macrocmd.o macroexp.o macroscope.o \
774 event-loop.o event-top.o inf-loop.o completer.o \
775 gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
776 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
780 exec.o bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
781 dbxread.o coffread.o coff-pe-read.o \
782 dwarf2read.o mipsread.o stabsread.o corefile.o \
783 dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
784 ada-lang.o c-lang.o f-lang.o objc-lang.o \
786 varobj.o vec.o wrapper.o \
787 jv-lang.o jv-valprint.o jv-typeprint.o \
788 m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
789 scm-exp.o scm-lang.o scm-valprint.o \
791 complaints.o typeprint.o \
792 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
793 ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
794 serial.o mdebugread.o top.o utils.o \
797 frame.o frame-unwind.o doublest.o \
799 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
801 reggroups.o regset.o \
804 solib.o solib-null.o \
805 prologue-value.o memory-map.o xml-support.o \
806 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o
811 CLEANDIRS
= $(SUBDIRS
) gnulib
813 # For now, shortcut the "configure GDB for fewer languages" stuff.
820 f-exp.c m2-exp.c p-exp.c
826 f-exp.o m2-exp.o p-exp.o
828 # Things which need to be built when making a distribution.
830 DISTSTUFF
= $(YYFILES
)
833 # All generated files which can be included by another file.
834 generated_files
= config.h observer.h observer.inc ada-lex.c
$(GNULIB_H
)
840 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
841 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
843 all-tui
: $(TUI
)$(EXEEXT
)
847 # The check target can not use subdir_do, because subdir_do does not
848 # use TARGET_FLAGS_TO_PASS.
850 @if
[ -f testsuite
/Makefile
]; then \
851 rootme
=`pwd`; export rootme
; \
852 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
854 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
857 # The idea is to parallelize testing of multilibs, for example:
858 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
859 # will run 3 concurrent sessions of check, eventually testing all 10
860 # combinations. GNU make is required for the % pattern to work, as is
861 # a shell that expands alternations within braces. If GNU make is not
862 # used, this rule will harmlessly fail to match.
864 @if
[ -f testsuite
/config.status
]; then \
865 rootme
=`pwd`; export rootme
; \
866 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
867 target
=`echo "$@" | sed 's,//.*,,'`; \
868 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
869 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
870 testdir
=testsuite.
$$vardots; \
871 if
[ ! -f
$$testdir/Makefile
]; then \
872 (cd testsuite
&& find .
-name config.status
) | \
873 sed s
,/config.status
$$,, |
sort | while read subdir
; do \
874 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir/$$subdir && \
875 (cd
$$testdir/$$subdir && \
876 $(SHELL
) $$rootme/testsuite
/$$subdir/config.status \
878 $(SHELL
) .
/config.status
); done
; \
879 else :; fi
&& cd
$$testdir && \
880 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
881 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
885 info install-info clean-info
dvi pdf install-pdf html install-html
: force
886 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
889 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
890 pack gdb.t
; rm -f gdb.t
893 # Traditionally "install" depends on "all". But it may be useful
894 # not to; for example, if the user has made some trivial change to a
895 # source file and doesn't care about rebuilding or just wants to save the
896 # time it takes for make to check that all is up to date.
897 # install-only is intended to address that need.
898 install: all install-only
899 install-only
: $(CONFIG_INSTALL
)
900 transformed_name
=`t='$(program_transform_name)'; \
901 echo gdb | sed -e "$$t"` ; \
902 if
test "x$$transformed_name" = x
; then \
903 transformed_name
=gdb
; \
907 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
908 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
909 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
910 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
911 $(DESTDIR
)$(man1dir) ; \
912 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
913 $(DESTDIR
)$(man1dir)/$$transformed_name.1
914 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
917 transformed_name
=`t='$(program_transform_name)'; \
918 echo $(TUI) | sed -e "$$t"` ; \
919 if
test "x$$transformed_name" = x
; then \
920 transformed_name
=$(TUI
) ; \
924 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
925 $(INSTALL_PROGRAM
) $(TUI
)$(EXEEXT
) \
926 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
927 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
928 $(DESTDIR
)$(man1dir) ; \
929 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
930 $(DESTDIR
)$(man1dir)/$$transformed_name.1
933 uninstall: force $(CONFIG_UNINSTALL
)
934 transformed_name
=`t='$(program_transform_name)'; \
935 echo gdb | sed -e $$t` ; \
936 if
test "x$$transformed_name" = x
; then \
937 transformed_name
=gdb
; \
941 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
942 $(DESTDIR
)$(man1dir)/$$transformed_name.1
943 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
944 .PHONY
: uninstall-tui
946 transformed_name
=`t='$(program_transform_name)'; \
947 echo $(TUI) | sed -e $$t` ; \
948 if
test "x$$transformed_name" = x
; then \
949 transformed_name
=$(TUI
) ; \
953 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
954 $(DESTDIR
)$(man1dir)/$$transformed_name.1
956 # The C++ name parser can be built standalone for testing.
957 test-cp-name-parser.o
: cp-name-parser.c
958 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
961 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
962 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
963 test-cp-name-parser.o
$(LIBIBERTY
)
965 # We do this by grepping through sources. If that turns out to be too slow,
966 # maybe we could just require every .o file to have an initialization routine
967 # of a given name (top.o -> _initialize_top, etc.).
969 # Formatting conventions: The name of the _initialize_* routines must start
970 # in column zero, and must not be inside #if.
972 # Note that the set of files with init functions might change, or the names
973 # of the functions might change, so this files needs to depend on all the
974 # object files that will be linked into gdb.
976 # FIXME: There is a problem with this approach - init.c may force
977 # unnecessary files to be linked in.
979 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
980 # the first call is to _initialize_gdbtypes (implemented by explicitly
981 # putting that function's name first in the init.l-tmp file). This is
982 # a hack to ensure that all the architecture dependant global
983 # builtin_type_* variables are initialized before anything else
984 # (per-architecture code is called in the same order that it is
985 # registered). The ``correct fix'' is to have all the builtin types
986 # made part of the architecture and initialize them on-demand (using
987 # gdbarch_data) just like everything else. The catch is that other
988 # modules still take the address of these builtin types forcing them
989 # to be variables, sigh!
991 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
992 # anchored on the first column and excludes the ``/'' character so
993 # that it doesn't add the $(srcdir) prefix to any file that already
994 # has an absolute path. It turns out that $(DEC)'s True64 make
995 # automatically adds the $(srcdir) prefixes when it encounters files
996 # in sub-directories such as cli/ and mi/.
998 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
999 # duplicates. Files in the gdb/ directory can end up appearing in
1000 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1002 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1003 init.c
: $(INIT_FILES
)
1005 @
rm -f init.c-tmp init.l-tmp
1007 @echo gdbtypes
> init.l-tmp
1008 @
-LANG
=c
; export LANG
; \
1009 LC_ALL
=c
; export LC_ALL
; \
1010 echo
$(INIT_FILES
) | \
1013 -e
'/^gdbtypes.[co]$$/d' \
1014 -e
'/^init.[co]$$/d' \
1015 -e
'/xdr_ld.[co]$$/d' \
1016 -e
'/xdr_ptrace.[co]$$/d' \
1017 -e
'/xdr_rdb.[co]$$/d' \
1018 -e
'/udr.[co]$$/d' \
1019 -e
'/udip2soc.[co]$$/d' \
1020 -e
'/udi2go32.[co]$$/d' \
1021 -e
'/version.[co]$$/d' \
1022 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1023 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1024 -e
's/\.[co]$$/.c/' \
1025 -e
's,signals\.c,signals/signals\.c,' \
1026 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1028 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1033 * ) echo
$$f ; fs
="$$fs $$f";; \
1036 @echo
'/* Do not modify this file. */' >>init.c-tmp
1037 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1038 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1039 @echo
'#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
1040 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1041 @echo
'void' >>init.c-tmp
1042 @echo
'initialize_all_files (void)' >>init.c-tmp
1043 @echo
'{' >>init.c-tmp
1044 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1045 @echo
'}' >>init.c-tmp
1047 @mv init.c-tmp init.c
1051 # Removing the old gdb first works better if it is running, at least on SunOS.
1052 gdb
$(EXEEXT
): gdb.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1054 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1055 -o gdb
$(EXEEXT
) gdb.o libgdb.a \
1056 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1058 $(TUI
)$(EXEEXT
): tui-main.o libgdb.a
$(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1059 rm -f
$(TUI
)$(EXEEXT
)
1060 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1061 -o
$(TUI
)$(EXEEXT
) tui-main.o libgdb.a \
1062 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1064 # Convenience rule to handle recursion.
1065 $(LIBGNU
) $(GNULIB_H
): all-lib
1066 all-lib
: gnulib
/Makefile
1067 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=gnulib subdir_do
1070 # Create a library of the gdb object files and build GDB by linking
1073 # init.o is very important. It pulls in the rest of GDB.
1074 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1075 libgdb.a
: $(LIBGDB_OBS
)
1077 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1080 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1081 # on itself without copying the executable. So "make gdb1" will make
1082 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1083 # Removing gdb1 before the copy is the right thing if gdb1 is open
1084 # in another process.
1085 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1087 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1089 # Put the proper machine-specific files first, so M-. on a machine
1090 # specific routine gets the one for the correct machine. (FIXME: those
1091 # files go in twice; we should be removing them from the main list).
1093 # TAGS depends on all the files that go into it so you can rebuild TAGS
1094 # with `make TAGS' and not have to say `rm TAGS' first.
1096 TAGS
: $(DEPFILES
) $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1098 @etags
$(srcdir)/$(NAT_FILE
) \
1099 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1100 echo $(srcdir)/$$i ; \
1101 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1103 done) | sed -e 's/\.o$$/\.c/'` \
1104 `find $(srcdir)/config -name '*.h' -print`
1108 clean mostlyclean: $(CONFIG_CLEAN
)
1109 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1110 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1111 rm -f init.c version.c
1112 rm -f gdb
$(EXEEXT
) core make.log
1113 rm -f gdb
[0-9]$(EXEEXT
)
1114 rm -f test-cp-name-parser
$(EXEEXT
)
1115 rm -f xml-builtin.c stamp-xml
1119 rm -f
$(TUI
)$(EXEEXT
)
1121 # This used to depend on c-exp.c m2-exp.c TAGS
1122 # I believe this is wrong; the makefile standards for distclean just
1123 # describe removing files; the only sort of "re-create a distribution"
1124 # functionality described is if the distributed files are unmodified.
1125 # NB: While GDBSERVER might be configured on native systems, it isn't
1126 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1128 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1129 rm -f gdbserver
/config.status gdbserver
/config.log
1130 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1131 rm -f gdbserver
/Makefile gdbserver
/config.cache
1132 rm -f nm.h config.status config.h stamp-h .gdbinit
1133 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1134 rm -f config.log config.cache
1138 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1139 realclean: maintainer-clean
1141 local-maintainer-clean
:
1142 @echo
"This command is intended for maintainers to use;"
1143 @echo
"it deletes files that may require special tools to rebuild."
1146 ada-lex.c ada-exp.c \
1149 f-exp.c m2-exp.c p-exp.c
1150 rm -f TAGS
$(INFOFILES
)
1152 rm -f nm.h config.status
1154 do-maintainer-clean
:
1155 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1158 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1159 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1162 @for i in
$(DODIRS
); do \
1163 if
[ -f .
/$$i/Makefile
] ; then \
1165 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1166 else exit
1 ; fi
; \
1170 Makefile
: Makefile.in config.status @frags@
1171 # Regenerate the Makefile and the tm.h / nm.h links.
1172 CONFIG_FILES
="Makefile" \
1175 $(SHELL
) config.status
1177 gnulib
/Makefile
: gnulib
/Makefile.in gnulib
/Makefile.in config.status @frags@
1178 CONFIG_FILES
="gnulib/Makefile" \
1179 CONFIG_COMMANDS
="depfiles" \
1182 $(SHELL
) config.status
1184 config.h
: stamp-h
; @true
1185 stamp-h
: config.in config.status
1186 CONFIG_HEADERS
=config.h
:config.in \
1187 CONFIG_COMMANDS
="default depdir" \
1190 $(SHELL
) config.status
1192 config.status
: configure configure.tgt configure.host
1193 $(SHELL
) config.status
--recheck
1198 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1200 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1202 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1204 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1206 # GDB MANUAL: TeX dvi file
1208 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1210 # GDB MANUAL: info file
1212 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1214 # Make copying.c from COPYING
1215 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1216 awk
-f
$(srcdir)/copying.awk \
1217 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1218 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1220 version.c
: Makefile version.in
1221 rm -f version.c-tmp version.c
1222 echo
'#include "version.h"' >> version.c-tmp
1223 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1224 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1225 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1226 mv version.c-tmp version.c
1228 observer.h
: observer.sh doc
/observer.texi
1229 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1231 observer.inc
: observer.sh doc
/observer.texi
1232 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1235 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1236 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1238 gdb.cxref
: $(SFILES
)
1239 cxref
-I.
$(SFILES
) >gdb.cxref
1243 # GNU Make has an annoying habit of putting *all* the Makefile variables
1244 # into the environment, unless you include this target as a circumvention.
1245 # Rumor is that this will be fixed (and this target can be removed)
1249 # GNU Make 3.63 has a different problem: it keeps tacking command line
1250 # overrides onto the definition of $(MAKE). This variable setting
1256 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1257 alpha-tdep.c alpha-mdebug-tdep.c \
1258 alpha-linux-tdep.c alpha-osf1-tdep.c \
1259 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1260 amd64-nat.c amd64-tdep.c \
1261 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1262 amd64nbsd-nat.c amd64nbsd-tdep.c \
1263 amd64obsd-nat.c amd64obsd-tdep.c \
1264 amd64-linux-nat.c amd64-linux-tdep.c \
1266 arm-linux-nat.c arm-linux-tdep.c arm-tdep.c \
1267 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1269 bsd-uthread.c bsd-kvm.c \
1270 core-regset.c corelow.c \
1275 go32-nat.c h8300-tdep.c \
1276 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1277 hppa-linux-tdep.c hppa-linux-nat.c \
1278 hppabsd-nat.c hppabsd-tdep.c \
1280 hppanbsd-nat.c hppanbsd-tdep.c \
1281 i386-tdep.c i386-linux-nat.c \
1282 i386v4-nat.c i386-cygwin-tdep.c \
1283 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1284 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1287 i386-linux-tdep.c i386-nat.c \
1288 i386-sol2-nat.c i386-sol2-tdep.c \
1289 i386gnu-nat.c i386gnu-tdep.c \
1290 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1291 inf-ptrace.c inf-ttrace.c \
1297 m32r-linux-nat.c m32r-linux-tdep.c \
1299 m68kbsd-nat.c m68kbsd-tdep.c \
1300 m68klinux-nat.c m68klinux-tdep.c \
1301 m88k-tdep.c m88kbsd-nat.c \
1303 mips-linux-nat.c mips-linux-tdep.c \
1306 mipsnbsd-nat.c mipsnbsd-tdep.c \
1307 mips64obsd-nat.c mips64obsd-tdep.c \
1308 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1311 somread.c solib-som.c \
1313 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1314 ppcnbsd-nat.c ppcnbsd-tdep.c \
1315 ppcobsd-nat.c ppcobsd-tdep.c \
1317 remote-m32r-sdi.c remote-mips.c \
1320 rs6000-nat.c rs6000-tdep.c \
1321 s390-tdep.c s390-nat.c \
1323 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1324 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1326 solib-irix.c solib-svr4.c solib-sunos.c \
1328 sparc-linux-tdep.c sparc-nat.c sparc-sol2-nat.c sparc-sol2-tdep.c \
1329 sparc-tdep.c sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-linux-nat.c \
1330 sparc64-linux-tdep.c sparc64-nat.c sparc64-sol2-tdep.c \
1331 sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1332 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1333 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1334 spu-linux-nat.c spu-tdep.c \
1336 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1338 xcoffread.c xcoffsolib.c \
1340 xtensa-tdep.c xtensa-config.c \
1341 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1343 # Some files need explicit build rules (due to -Werror problems) or due
1344 # to sub-directory fun 'n' games.
1346 hpux-thread.o
: $(srcdir)/hpux-thread.c
1347 $(COMPILE
) -I
$(srcdir)/osf-share
-I
$(srcdir)/osf-share
/HP800 \
1348 -I
/usr
/include/dce
$(srcdir)/hpux-thread.c
1351 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1352 main.o
: $(srcdir)/main.c
1353 $(COMPILE
) $(TARGET_SYSTEM_ROOT_DEFINE
) -DBINDIR
=\"$(bindir)\" $(srcdir)/main.c
1356 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1357 # errors. It turns out that that is the least of monitor.c's
1358 # problems. The function print_vsprintf appears to be using
1359 # va_arg(long) to extract CORE_ADDR parameters - something that
1360 # definitly will not work. "monitor.c" needs to be rewritten so that
1361 # it doesn't use format strings and instead uses callbacks.
1362 monitor.o
: $(srcdir)/monitor.c
1363 $(COMPILE.pre
) $(INTERNAL_WARN_CFLAGS
) $(COMPILE.post
) $(srcdir)/monitor.c
1366 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1367 # checks format strings.
1368 printcmd.o
: $(srcdir)/printcmd.c
1369 $(COMPILE.pre
) $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1370 $(GDB_WERROR_CFLAGS
) $(COMPILE.post
) $(srcdir)/printcmd.c
1373 # FIXME: Procfs.o gets -Wformat errors because things like pid_t don't
1374 # match output format strings.
1375 procfs.o
: $(srcdir)/procfs.c
1376 $(COMPILE.pre
) $(INTERNAL_WARN_CFLAGS
) $(COMPILE.post
) $(srcdir)/procfs.c
1379 # Message files. Based on code in gcc/Makefile.in.
1381 # Rules for generating translated message descriptions. Disabled by
1382 # autoconf if the tools are not available.
1384 .SUFFIXES
: .po .gmo .pox .pot
1385 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1389 # This notation should be acceptable to all Make implementations used
1390 # by people who are interested in updating .po files.
1391 update-po
: $(CATALOGS
:.gmo
=.pox
)
1393 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1396 -test -d po || mkdir po
1397 $(GMSGFMT
) --statistics
-o
$@
$<
1399 # The new .po has to be gone over by hand, so we deposit it into
1400 # build/po with a different extension. If build/po/$(PACKAGE).pot
1401 # exists, use it (it was just created), else use the one in srcdir.
1403 -test -d po || mkdir po
1404 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1405 then echo po/$(PACKAGE).pot; \
1406 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1408 # This rule has to look for .gmo modules in both srcdir and the cwd,
1409 # and has to check that we actually have a catalog for each language,
1410 # in case they weren't built or included with the distribution.
1412 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1413 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1414 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1415 if
[ -f
$$cat ]; then
:; \
1416 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1419 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1420 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1421 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1422 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1423 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1426 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1427 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1428 if
[ -f
$$cat ]; then
:; \
1429 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1432 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1433 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1435 # Delete po/*.gmo only if we are not building in the source directory.
1437 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1439 # Rule for regenerating the message template (gdb.pot). Instead of
1440 # forcing everyone to edit POTFILES.in, which proved impractical, this
1441 # rule has no dependencies and always regenerates gdb.pot. This is
1442 # relatively harmless since the .po files do not directly depend on
1443 # it. The .pot file is left in the build directory. Since GDB's
1444 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1445 # files) force this rule.
1446 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1447 po
/$(PACKAGE
).pot
: force
1448 -test -d po || mkdir po
1449 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1453 # YACC/LEX dependencies
1455 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1456 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1457 # said LANG-exp.c rather than ./c-exp.c some makes would
1458 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1459 # decls for malloc/realloc/free which conflict with everything else.
1460 # Strictly speaking c-exp.c should therefore depend on
1461 # Makefile.in, but that was a pretty big annoyance.
1465 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@.tmp
-- $(YACC
) $(YFLAGS
)
1466 -sed
-e
'/extern.*malloc/d' \
1467 -e
'/extern.*realloc/d' \
1468 -e
'/extern.*free/d' \
1469 -e
'/include.*malloc.h/d' \
1470 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1471 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1472 -e
'/^#line.*y.tab.c/d' \
1477 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1478 $(FLEX
) -o
$@
$< && \
1480 sed
-e
'/extern.*malloc/d' \
1481 -e
'/extern.*realloc/d' \
1482 -e
'/extern.*free/d' \
1483 -e
'/include.*malloc.h/d' \
1484 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1485 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1486 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1490 elif
[ -f
$@
]; then \
1491 echo
"Warning: $*.c older than $*.l and flex not available."; \
1493 echo
"$@ missing and flex not available."; \
1497 .PRECIOUS
: ada-exp.c ada-lex.c
1502 .PRECIOUS
: objc-exp.c
1507 xml-builtin.c
: stamp-xml
; @true
1508 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1509 rm -f xml-builtin.tmp
1511 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1512 xml-builtin.tmp
$(XMLFILES
)
1513 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1514 echo stamp
> stamp-xml
1516 .PRECIOUS
: xml-builtin.c
1519 # gdb/cli/ dependencies
1521 # Need to explicitly specify the compile rule as make will do nothing
1522 # or try to compile the object file into the sub-directory.
1524 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1525 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1528 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1529 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1532 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1533 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1536 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1537 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1540 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1541 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1544 cli-script.o
: $(srcdir)/cli
/cli-script.c
1545 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1548 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1549 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1552 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1553 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1558 # GDBTK sub-directory
1560 # Need to explicitly specify the compile rule as make will do nothing
1561 # or try to compile the object file into the mi directory.
1563 all-gdbtk
: insight
$(EXEEXT
)
1566 transformed_name
=`t='$(program_transform_name)'; \
1567 echo insight | sed -e $$t` ; \
1568 if
test "x$$transformed_name" = x
; then \
1569 transformed_name
=insight
; \
1573 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1574 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1575 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1576 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1577 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1578 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1579 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1580 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1581 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1582 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1583 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1584 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1585 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1586 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1587 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1588 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1589 cd
$(srcdir)/gdbtk
/library
; \
1590 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1592 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1596 transformed_name
=`t='$(program_transform_name)'; \
1597 echo insight | sed -e $$t` ; \
1598 if
test "x$$transformed_name" = x
; then \
1599 transformed_name
=insight
; \
1603 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1604 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1607 rm -f insight
$(EXEEXT
)
1609 # Removing the old gdb first works better if it is running, at least on SunOS.
1610 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1611 $(CDEPS
) $(TDEPLIBS
)
1612 rm -f insight
$(EXEEXT
)
1613 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1614 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1615 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1617 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1618 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1620 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1621 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1623 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1624 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1626 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1627 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1630 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1631 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1634 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1635 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1638 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1639 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1642 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1643 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1646 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1647 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1650 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1651 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1654 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1655 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1658 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1659 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1662 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1663 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1668 # gdb/mi/ dependencies
1670 # Need to explicitly specify the compile rule as make will do nothing
1671 # or try to compile the object file into the sub-directory.
1673 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1674 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1677 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1678 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1681 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1682 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1685 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1686 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1689 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1690 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1693 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1694 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1697 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1698 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1701 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1702 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1705 mi-console.o
: $(srcdir)/mi
/mi-console.c
1706 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1709 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1710 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1713 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1714 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1717 mi-main.o
: $(srcdir)/mi
/mi-main.c
1718 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1721 mi-out.o
: $(srcdir)/mi
/mi-out.c
1722 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1725 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1726 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1729 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1730 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1733 mi-common.o
: $(srcdir)/mi
/mi-common.c
1734 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1738 # gdb/signals/ dependencies
1740 # Need to explicitly specify the compile rule as make will do nothing
1741 # or try to compile the object file into the sub-directory.
1743 signals.o
: $(srcdir)/signals
/signals.c
1744 $(COMPILE
) $(srcdir)/signals
/signals.c
1748 # gdb/tui/ dependencies
1750 # Need to explicitly specify the compile rule as make will do nothing
1751 # or try to compile the object file into the sub-directory.
1753 tui.o
: $(srcdir)/tui
/tui.c
1754 $(COMPILE
) $(srcdir)/tui
/tui.c
1757 tui-command.o
: $(srcdir)/tui
/tui-command.c
1758 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1761 tui-data.o
: $(srcdir)/tui
/tui-data.c
1762 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1765 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1766 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1769 tui-file.o
: $(srcdir)/tui
/tui-file.c
1770 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1773 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1774 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1777 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1778 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1781 tui-io.o
: $(srcdir)/tui
/tui-io.c
1782 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1785 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1786 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1789 tui-main.o
: $(srcdir)/tui
/tui-main.c
1790 $(COMPILE
) $(srcdir)/tui
/tui-main.c
1793 tui-out.o
: $(srcdir)/tui
/tui-out.c
1794 $(COMPILE
) $(srcdir)/tui
/tui-out.c
1797 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
1798 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
1801 tui-source.o
: $(srcdir)/tui
/tui-source.c
1802 $(COMPILE
) $(srcdir)/tui
/tui-source.c
1805 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
1806 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
1809 tui-win.o
: $(srcdir)/tui
/tui-win.c
1810 $(COMPILE
) $(srcdir)/tui
/tui-win.c
1813 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
1814 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
1817 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
1818 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
1821 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
1822 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
1826 # gdb/python/ dependencies
1828 # Need to explicitly specify the compile rule as make will do nothing
1829 # or try to compile the object file into the sub-directory.
1831 # Flags needed to compile Python code
1832 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
1834 python.o
: $(srcdir)/python
/python.c
1835 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
1838 python-utils.o
: $(srcdir)/python
/python-utils.c
1839 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python-utils.c
1843 # Dependency tracking. Most of this is conditional on GNU Make being
1844 # found by configure; if GNU Make is not found, we fall back to a
1848 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
1849 # Note that we put the dependencies into a .Tpo file, then move them
1850 # into place if the compile succeeds. We need this because gcc does
1851 # not atomically write the dependency output file.
1852 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
1853 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
1854 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
1855 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
1857 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
1858 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
1859 # depcomp handles atomicity for us, so we don't need a postcompile
1861 @GMAKE_TRUE@
override POSTCOMPILE
=
1864 # A list of all the objects we might care about in this build, for
1865 # dependency tracking.
1866 all_object_files
= gdb.o tui-main.o
$(LIBGDB_OBS
) gdbtk-main.o \
1867 test-cp-name-parser.o
1869 # Ensure that generated files are created early. Use order-only
1870 # dependencies if available. They require GNU make 3.80 or newer,
1871 # and the .VARIABLES variable was introduced at the same time.
1872 @GMAKE_TRUE@
ifdef .VARIABLES
1873 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
1875 $(all_object_files
) : $(generated_files
)
1879 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
1881 ### end of the gdb Makefile.in.